mibs/MIBS/transition/TN-SYS-LOG-MIB

286 lines
8.3 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- Transition Networks Syslog MIB
--
-- Copyright (C) 2012 Transition Networks, Inc. All Rights Reserved.
-- *****************************************************************
TN-SYS-LOG-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString, RowStatus, TruthValue, TimeStamp, DateAndTime
FROM SNMPv2-TC
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
MODULE-IDENTITY,
OBJECT-IDENTITY,
enterprises, IpAddress FROM SNMPv2-SMI
entPhysicalIndex FROM ENTITY-MIB
tnDevMgmt FROM TN-MGMT-MIB;
tnSyslogMIB MODULE-IDENTITY
LAST-UPDATED "201207230000Z"
ORGANIZATION "Transition Networks, Inc."
CONTACT-INFO
" Transition Networks
Technical Support
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Tel: +1-800-526-9267
E-mail: techsupport@transition.com"
DESCRIPTION
"The mib module for managing sys log."
::= { tnDevMgmt 18 }
--
-- Textual Conventions
--
SyslogLevelValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a syslog level."
SYNTAX INTEGER
{
emerg (1), -- emergency; system is unusable
alert (2), -- action must be taken immediately
crit (3), -- critical condition
err (4), -- error condition
warning (5), -- warning condition
notice (6), -- normal but significant condition
info (7), -- informational message
debug (8) -- debug-level messages
}
SyslogLevelValueAll ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a syslog level mainly for query and clear."
SYNTAX INTEGER
{
all (0), -- all; usually for query and clear operation
emerg (1), -- emergency; system is unusable
alert (2), -- action must be taken immediately
crit (3), -- critical condition
err (4), -- error condition
warning (5), -- warning condition
notice (6), -- normal but significant condition
info (7), -- informational message
debug (8) -- debug-level messages
}
--
-- Mib variables
--
--
-- tnSyslogMgmtTable
--
tnSyslogMgmtTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNSyslogMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TN Sys Log Mgmt Table"
::= { tnSyslogMIB 1 }
tnSyslogMgmtEntry OBJECT-TYPE
SYNTAX TNSyslogMgmtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the syslog configuration on a device."
INDEX { entPhysicalIndex }
::= { tnSyslogMgmtTable 1 }
TNSyslogMgmtEntry ::= SEQUENCE {
tnSyslogServerAddrType InetAddressType,
tnSyslogServerAddr InetAddress,
tnSyslogServerPort INTEGER,
tnSyslogLevel SyslogLevelValue,
tnSyslogMode INTEGER,
tnSyslogLocalFileName DisplayString,
tnSyslogServerEnable INTEGER
}
tnSyslogServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Address type of Syslog Server.
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
::= { tnSyslogMgmtEntry 1 }
tnSyslogServerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Address of Syslog Server.
For a detailed description of this type, please refer to INET-ADDRESS-MIB."
::= { tnSyslogMgmtEntry 2 }
tnSyslogServerPort OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Syslog server listening port. Its default value is 514."
::= { tnSyslogMgmtEntry 3 }
tnSyslogLevel OBJECT-TYPE
SYNTAX SyslogLevelValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The severity levels of syslog messages. The enumeration
values are equal to the values that syslog uses + 1; The messages whose
serverity level is lower than and equal to this level will be logged."
::= { tnSyslogMgmtEntry 4 }
tnSyslogMode OBJECT-TYPE
SYNTAX INTEGER
{
logLocal(1),
logRemote(2),
logLocalAndRemote(3),
off(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Syslog operation mode.
For the setting behavior:
logLocal(1): syslog messages are only saved to local device;
logRemote(2): syslog messages are only sent to remote server;
logLocalAndRemote(3): syslog messages are saved to local
device and sent to remote server;
off(4): do not save syslog messages."
::= { tnSyslogMgmtEntry 5 }
tnSyslogLocalFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Absolute filename on the local file system for saving syslog messages.
This is valid only when 'tnSyslogMode' is set to 'logLocal' and
'logLocalAndRemote'."
::= { tnSyslogMgmtEntry 6 }
tnSyslogServerEnable OBJECT-TYPE
SYNTAX INTEGER { enable (1), disable (2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable or Disable whether Syslog messages are sent to remote Syslog Server."
::= { tnSyslogMgmtEntry 7 }
--
-- tnSyslogMessageTable
--
tnSyslogMessageTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNSyslogMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TN Syslog Message Table"
::= { tnSyslogMIB 2 }
tnSyslogMessageEntry OBJECT-TYPE
SYNTAX TNSyslogMessageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a syslog message on a device."
INDEX { tnSyslogMessageId }
::= { tnSyslogMessageTable 1 }
TNSyslogMessageEntry ::= SEQUENCE {
tnSyslogMessageId INTEGER,
tnSyslogMessageTime DisplayString,
tnSyslogMessageLevel SyslogLevelValue,
tnSyslogMessage DisplayString
}
tnSyslogMessageId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Id of a sys log."
::= { tnSyslogMessageEntry 1 }
tnSyslogMessageTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time of the sys log."
::= { tnSyslogMessageEntry 2 }
tnSyslogMessageLevel OBJECT-TYPE
SYNTAX SyslogLevelValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The level of the sys log."
::= { tnSyslogMessageEntry 3}
tnSyslogMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The message of the sys log."
::= { tnSyslogMessageEntry 4}
--
-- tnSyslogExtTable
--
tnSyslogExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF TNSyslogExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TN Syslog extension table"
::= { tnSyslogMIB 3 }
tnSyslogExtEntry OBJECT-TYPE
SYNTAX TNSyslogExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a syslog extension info on a device."
INDEX { entPhysicalIndex }
::= { tnSyslogExtTable 1 }
TNSyslogExtEntry ::= SEQUENCE {
tnSyslogQueryLevel SyslogLevelValueAll,
tnSyslogClearLevel SyslogLevelValueAll,
tnSyslogClear TruthValue
}
tnSyslogQueryLevel OBJECT-TYPE
SYNTAX SyslogLevelValueAll
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Syslog level for query."
::= { tnSyslogExtEntry 1 }
tnSyslogClearLevel OBJECT-TYPE
SYNTAX SyslogLevelValueAll
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Syslog level for clearing."
::= { tnSyslogExtEntry 2 }
tnSyslogClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "True for clearing the syslogs."
::= { tnSyslogExtEntry 3 }
END