mibs/MIBS/trellix/TRELLIX-SENSOR-SMI

206 lines
5.3 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- TRELLIX CONFIDENTIAL
-- TRELLIX-SENSOR-SMI:
-- Trellix Sensor Structure of Management Information
--
-- Copyright (c) 2022 MUSARUBRA US, LLC
-- All rights reserved.
--
-- *****************************************************************
TRELLIX-SENSOR-SMI DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, MODULE-IDENTITY, Integer32
FROM SNMPv2-SMI
ivProducts
FROM TRELLIX-INTRUVERT-SMI;
ivSensor MODULE-IDENTITY
LAST-UPDATED "200707090000Z"
ORGANIZATION
"MUSARUBRA US LLC"
CONTACT-INFO
"Trellix Customer Service Department
Postal: 6220 American Center Drive
San Jose CA 95002-2563
Tel: +1 800 338 8754
E-mail: support@mcafee.com"
DESCRIPTION
"The Structure of Management Information for the Trellix enterprise."
REVISION "200707090000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ivProducts 1 }
--This group is defined to provide a common place fo the MIB objects that would be used as
--index keys into SNMP tables defined within the Sensor Configuration, Performance &Trap MIBs
--
ivIndex OBJECT IDENTIFIER ::= { ivSensor 1 }
slotIndex OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the position (starting from 1) of a slot in the chassis."
::= { ivIndex 1 }
processorIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Processor CPU core index (starting from 1) within a
sensor card."
::= { ivIndex 2 }
npIndex OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NP CPU core index (starting from 1) within a sensor card."
::= { ivIndex 3 }
mgmtPortIndex OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Management port index (starting from 1) on a Sensor management card.
Must not exceed a maximum count as specified by the mgmtPortMaxCount object in
the vendor specified MIB specified for this mgmt card."
::= { ivIndex 4 }
intfPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface port index (starting from 1) on a sensor analysis card.
These ports are also referred to as front-end ports."
::= { ivIndex 5 }
respPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..33)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Response port index (starting from 1) on a sensor-analysis card."
::= { ivIndex 6 }
bundleIndex OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trellix management system defined bundle number each sensor card belongs to.
Valid:1onwards
Note: Use cases may use the value '0' to interpret that the notion of 'bundle' is to be ignored."
::= { ivIndex 7 }
qedIndex OBJECT-TYPE
SYNTAX Integer32 (1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QED processor index (starting from 1) on a Sensor management card."
::= { ivIndex 8 }
sibyteIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SiByte processor index (starting from 1) on a Sensor management card."
::= { ivIndex 9 }
rateLimitQueueIndex OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ratelimit Queue index (starting from 1). For FE ports the index value is between (1 to 6).
For GE ports the index value is between (1 to 8)"
::= { ivIndex 10 }
intfPhysicalPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface physical port index (starting from 1) on a sensor analysis card.
These are applicable to the Load Balancer Solution only."
::= { ivIndex 11 }
ntpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ntp Server index (starting from 1). Ntp Server Index value can be either 1 or 2."
::= { ivIndex 12 }
intfVirtualSlotIndex OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the position (starting from 1) of a slot in the virtual stack."
::= { ivIndex 13 }
intfVirtualPortIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface virtual port index (starting from 1) on a virtual stack analysis card.
These are applicable to the Stack Solution only."
::= { ivIndex 14 }
sslProbeIpv4Index OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ivIndex 15 }
processorNumIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ivIndex 16 }
sslProbeIpv6Index OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ivIndex 17 }
ivSensorConfiguration OBJECT IDENTIFIER ::= { ivSensor 2 }
ivSensorPerformance OBJECT IDENTIFIER ::= { ivSensor 3 }
ivSensorTraps OBJECT IDENTIFIER ::= { ivSensor 4 }
ivFirewallConfiguration OBJECT IDENTIFIER ::= { ivSensor 5 }
ivFirewallPerformance OBJECT IDENTIFIER ::= { ivSensor 6 }
END