mibs/MIBS/ubiquoss/UBQS-DHCP-MIB

1860 lines
52 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- UBQS-LARGESCALEOLT-DHCP-MIB.mib:
-- Ubiquoss Enterprise DHCP Structure of Management Information
--
-- July 2010, Bokyung Shin
--
-- Copyright (c) 2006 by Ubiquoss, Corp.
-- All rights reserved.
--
-- *****************************************************************
--
UBQS-DHCP-MIB DEFINITIONS ::= BEGIN
IMPORTS
ubiMgmtv2
FROM UBQS-SMI
RowStatus, MacAddress, TimeTicks, PhysAddress
FROM SNMPv2-TC
DisplayString
FROM RFC1213-MIB;
ubiDhcpMIB MODULE-IDENTITY
LAST-UPDATED "0607130000Z"
ORGANIZATION "Ubiquoss Corp."
CONTACT-INFO
"Chair : jisoo Kim
Ubiquoss Corp.
Postal: 24F Milennium B/D,
467-12, Dogok-Dong,
GangNam-Gu, Seoul 135-270
Korea
EMail: jisoo@ubiquoss.com
Phone: +82-2-2190-3100
Co-editor: Paul
Ubiquoss Corp.
Postal: 24F Milennium B/D,
467-12, Dogok-Dong,
GangNam-Gu, Seoul 135-270
Korea
EMail: paul@ubiquoss.com
Phone: +82-2-2190-3100"
DESCRIPTION
"This MIB module defines DHCP information"
::= { ubiMgmtv2 6 }
ubiDhcpServerMIBObjects OBJECT IDENTIFIER ::= { ubiDhcpMIB 1 }
-- ***********************************************************
-- ubiDhcpStatistics
-- ***********************************************************
ubiDhcpStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP statistics table."
::= { ubiDhcpServerMIBObjects 1}
ubiDhcpStatisticsEntry OBJECT-TYPE
SYNTAX UbiDhcpStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP statistics entry."
INDEX { noIndex }
::= { ubiDhcpStatisticsTable 1 }
UbiDhcpStatisticsEntry ::= SEQUENCE {
ubiDhcpCurPktMFMessage Unsigned32,
ubiDhcpCurPktBootReq Unsigned32,
ubiDhcpCurPktDiscover Unsigned32,
ubiDhcpCurPktReq Unsigned32,
ubiDhcpCurPktDecline Unsigned32,
ubiDhcpCurPktRelease Unsigned32,
ubiDhcpCurPktInform Unsigned32,
ubiDhcpCurPktEcho Unsigned32,
ubiDhcpCurPktReply Unsigned32,
ubiDhcpCurPktOffer Unsigned32,
ubiDhcpCurPktAck Unsigned32,
ubiDhcpCurPktNak Unsigned32
}
ubiDhcpCurPktMFMessage OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of malformed messages received from dhcp servers."
::= { ubiDhcpStatisticsEntry 1 }
ubiDhcpCurPktBootReq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of boot request messages received from dhcp servers."
::= { ubiDhcpStatisticsEntry 2 }
ubiDhcpCurPktDiscover OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discover messages received from dhcp servers."
::= { ubiDhcpStatisticsEntry 3 }
ubiDhcpCurPktReq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of request messages received from dhcp servers."
::= { ubiDhcpStatisticsEntry 4 }
ubiDhcpCurPktDecline OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of decline messages received from dhcp servers."
::= { ubiDhcpStatisticsEntry 5 }
ubiDhcpCurPktRelease OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of release messages received from dhcp servers."
::= { ubiDhcpStatisticsEntry 6 }
ubiDhcpCurPktInform OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of inform messages received from dhcp servers."
::= { ubiDhcpStatisticsEntry 7 }
ubiDhcpCurPktEcho OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of echo messages received from dhcp servers."
::= { ubiDhcpStatisticsEntry 8 }
ubiDhcpCurPktReply OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of reply messages sent to dhcp servers."
::= { ubiDhcpStatisticsEntry 9 }
ubiDhcpCurPktOffer OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of offer messages sent to dhcp servers."
::= { ubiDhcpStatisticsEntry 10 }
ubiDhcpCurPktAck OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of offer messages sent to dhcp servers."
::= { ubiDhcpStatisticsEntry 11 }
ubiDhcpCurPktNak OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of offer messages sent to dhcp servers."
::= { ubiDhcpStatisticsEntry 12 }
-- ***********************************************************
-- ubiDhcpServerPool
-- ***********************************************************
ubiDhcpServerPoolTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpServerPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of address pool that are configured on this server."
::= { ubiDhcpServerMIBObjects 2}
ubiDhcpServerPoolEntry OBJECT-TYPE
SYNTAX UbiDhcpServerPoolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A logical row in the DHCP PoolTable."
INDEX { ubiDhcpServerPoolName }
::= { ubiDhcpServerPoolTable 1 }
UbiDhcpServerPoolEntry ::= SEQUENCE {
-- ubiDhcpServerPoolIndex
-- Integer32,
ubiDhcpServerPoolName
DisplayString,
ubiDhcpServerPoolSubnet
IpAddress,
ubiDhcpServerPoolSubnetMask
IpAddress,
ubiDhcpServerPoolSubnetFreeAddress
Unsigned32,
ubiDhcpServerPoolSubnetTotalAddress
Unsigned32,
ubiDhcpServerPoolSubnetInUse
Gauge32,
ubiDhcpServerPoolSubnetGroup
DisplayString,
ubiDhcpServerPoolType
INTEGER,
ubiDhcpServerPoolDomainName
OCTET STRING,
ubiDhcpServerPoolLeaseTimeMode
INTEGER,
ubiDhcpServerPoolLeaseTimeDays
Integer32,
ubiDhcpServerPoolLeaseTimeHours
Integer32,
ubiDhcpServerPoolLeaseTimeMinutes
Integer32,
ubiDhcpServerPoolUsageThreshold
Integer32,
ubiDhcpServerDefaultRouterInfo
IpAddress
}
-- ubiDhcpServerPoolIndex OBJECT-TYPE
-- SYNTAX Integer32
-- MAX-ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- " "
-- ::= { ubiDhcpServerPoolEntry 1 }
ubiDhcpServerPoolName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the subnet, which uniquely identifies an entry
in the serverSubnetTable."
::= { ubiDhcpServerPoolEntry 1 }
ubiDhcpServerPoolSubnet OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the subnet."
::= { ubiDhcpServerPoolEntry 2 }
ubiDhcpServerPoolSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subnet mask of the subnet. This MUST be the same as the
value of DHCP option 1 offered to clients on this subnet."
::= { ubiDhcpServerPoolEntry 3 }
ubiDhcpServerPoolSubnetFreeAddress OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IP addresses which are available within this DHCP address
pool. If the server does not count free addresses by DHCP address pool,
this value will be zero."
::= { ubiDhcpServerPoolEntry 4 }
ubiDhcpServerPoolSubnetTotalAddress OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IP addresses which are available within this DHCP address pool.
If the server does not count total addresses by DHCP address pool,
this value will be zero."
::= { ubiDhcpServerPoolEntry 5 }
ubiDhcpServerPoolSubnetInUse OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of addresses in this DHCP address pool that are currently
in use. This number includes those addresses whose lease has not expired
and addresses which have been reserved (either by the server or
through configuration)."
::= { ubiDhcpServerPoolEntry 6 }
ubiDhcpServerPoolSubnetGroup OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiDhcpServerPoolEntry 7 }
ubiDhcpServerPoolType OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
network(1),
host(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiDhcpServerPoolEntry 8 }
ubiDhcpServerPoolDomainName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerPoolEntry 9 }
ubiDhcpServerPoolLeaseTimeMode OBJECT-TYPE
SYNTAX INTEGER
{
infinite(1),
manual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Expire setting mode"
::= { ubiDhcpServerPoolEntry 10 }
ubiDhcpServerPoolLeaseTimeDays OBJECT-TYPE
SYNTAX Integer32 (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"left days(0..31)"
::= { ubiDhcpServerPoolEntry 11 }
ubiDhcpServerPoolLeaseTimeHours OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerPoolEntry 12 }
ubiDhcpServerPoolLeaseTimeMinutes OBJECT-TYPE
SYNTAX Integer32 (0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerPoolEntry 13 }
ubiDhcpServerPoolUsageThreshold OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"rate of used IP Numbers and available total IP Nubmber"
::= { ubiDhcpServerPoolEntry 14 }
ubiDhcpServerDefaultRouterInfo OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerPoolEntry 15 }
-- ***********************************************************
-- dhcp Server range table
-- ***********************************************************
ubiDhcpServerRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpServerRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ranges that are configured on this server."
::= { ubiDhcpServerMIBObjects 3 }
ubiDhcpServerRangeEntry OBJECT-TYPE
SYNTAX UbiDhcpServerRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A logical row in the dhcpRangeTable."
INDEX { ubiDhcpServerPoolIndex,
ubiDhcpRangeStart }
::= { ubiDhcpServerRangeTable 1 }
UbiDhcpServerRangeEntry ::= SEQUENCE {
ubiDhcpServerPoolIndex
Integer32,
ubiDhcpServerRangeStart
IpAddress,
ubiDhcpServerRangeEnd
IpAddress
}
ubiDhcpServerPoolIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" "
::= { ubiDhcpServerRangeEntry 1 }
ubiDhcpServerRangeStart OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the first address in the range. The value
of range start must be less than or equal to the value of range
end."
::= { ubiDhcpServerRangeEntry 2 }
ubiDhcpServerRangeEnd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the last address in the range. The value of
range end must be greater than or equal to the value of range
start."
::= { ubiDhcpServerRangeEntry 3 }
-- ***********************************************************
-- dhcp Server NetworkPoolRange table
-- ***********************************************************
ubiDhcpServerNetPoolRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpServerNetPoolRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ranges that are configured on this server."
::= { ubiDhcpServerMIBObjects 4 }
ubiDhcpServerNetPoolRangeEntry OBJECT-TYPE
SYNTAX UbiDhcpServerNetPoolRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A logical row in the dhcpRangeTable."
INDEX { ubiDhcpServerNetPoolRangePoolIndex,
ubiDhcpServerNetPoolRangeStartIpAddr, ubiDhcpServerNetPoolRangeEndIpAddr }
::= { ubiDhcpServerNetPoolRangeTable 1 }
UbiDhcpServerNetPoolRangeEntry ::= SEQUENCE {
ubiDhcpServerNetPoolRangePoolIndex
INTEGER,
ubiDhcpServerNetPoolRangeStartIpAddr
IpAddress,
ubiDhcpServerNetPoolRangeEndIpAddr
IpAddress,
ubiDhcpServerNetPoolRangeRowstatus
RowStatus
}
ubiDhcpServerNetPoolRangePoolIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiDhcpServerNetPoolRangeEntry 1 }
ubiDhcpServerNetPoolRangeStartIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the first address in the range. The value
of range start must be less than or equal to the value of range
end."
::= { ubiDhcpServerNetPoolRangeEntry 2 }
ubiDhcpServerNetPoolRangeEndIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the last address in the range. The value of
range end must be greater than or equal to the value of range
start."
::= { ubiDhcpServerNetPoolRangeEntry 3 }
ubiDhcpServerNetPoolRangeRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"row status"
::= { ubiDhcpServerNetPoolRangeEntry 4 }
-- ***********************************************************
-- ubiDhcpServerPoolRowTable(Creation)
-- ***********************************************************
ubiDhcpServerPoolRowTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpServerPoolRowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of address pool that are configured on this server."
::= { ubiDhcpServerMIBObjects 5 }
ubiDhcpServerPoolRowEntry OBJECT-TYPE
SYNTAX UbiDhcpServerPoolRowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A logical row in the DHCP PoolTable."
INDEX { ubiDhcpServerPoolIndex,
ubiDhcpServerRangeStart,
ubiDhcpServerRangeEnd }
::= { ubiDhcpServerPoolRowTable 1 }
UbiDhcpServerPoolRowEntry ::=
SEQUENCE {
ubiDhcpServerPoolRowStatus
RowStatus
}
ubiDhcpServerPoolRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"row status"
::= { ubiDhcpServerPoolRowEntry 1 }
-- ***********************************************************
-- dhcp Server Fixed Addr Table
-- ***********************************************************
ubiDhcpServerFixedAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpServerFixedAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"static ip addresses list which can be allocated"
::= { ubiDhcpServerMIBObjects 6 }
ubiDhcpServerFixedAddrEntry OBJECT-TYPE
SYNTAX UbiDhcpServerFixedAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ubiDhcpServerFixedAddrHostPoolName,
ubiDhcpServerFixedAddrIp,
ubiDhcpServerFixedAddrNetmask }
::= { ubiDhcpServerFixedAddrTable 1 }
UbiDhcpServerFixedAddrEntry ::=
SEQUENCE {
ubiDhcpServerFixedAddrHostPoolName
DisplayString,
ubiDhcpServerFixedAddrMac
MacAddress,
ubiDhcpServerFixedAddrIp
IpAddress,
ubiDhcpServerFixedAddrNetmask
IpAddress,
ubiDhcpServerFixedAddrRowStatus
RowStatus
}
ubiDhcpServerFixedAddrHostPoolName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DHCP Server Pool Name"
::= { ubiDhcpServerFixedAddrEntry 1 }
ubiDhcpServerFixedAddrMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerFixedAddrEntry 2 }
ubiDhcpServerFixedAddrIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerFixedAddrEntry 3 }
ubiDhcpServerFixedAddrNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerFixedAddrEntry 4 }
ubiDhcpServerFixedAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerFixedAddrEntry 5 }
-- ***********************************************************
-- dhcp Server DNS Table
-- ***********************************************************
ubiDhcpServerDnsTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpServerDnsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerMIBObjects 7 }
ubiDhcpServerDnsEntry OBJECT-TYPE
SYNTAX UbiDhcpServerDnsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ubiDhcpServerDnsPoolIndex, ubiDhcpServerDnsServerAddr }
::= { ubiDhcpServerDnsTable 1 }
UbiDhcpServerDnsEntry ::=
SEQUENCE {
ubiDhcpServerDnsPoolIndex
Integer32,
ubiDhcpServerDnsServerAddr
IpAddress,
ubiDhcpServerDnsRowStatus
RowStatus
}
ubiDhcpServerDnsPoolIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerDnsEntry 1 }
ubiDhcpServerDnsServerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerDnsEntry 2 }
ubiDhcpServerDnsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerDnsEntry 3 }
-- ***********************************************************
-- dhcp Server Binding Table
-- ***********************************************************
ubiDhcpServerBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpServerBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerMIBObjects 8 }
ubiDhcpServerBindingEntry OBJECT-TYPE
SYNTAX UbiDhcpServerBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ubiDhcpServerBindingIndex }
::= { ubiDhcpServerBindingTable 1 }
UbiDhcpServerBindingEntry ::=
SEQUENCE {
ubiDhcpServerBindingIndex
INTEGER,
ubiDhcpServerBindingIpAddr
IpAddress,
ubiDhcpServerBindingMacAddr
MacAddress,
ubiDhspServerBindingLeaseStart
OCTET STRING,
ubiDhspServerBindingLeaseExpiration
OCTET STRING,
ubiDhcpServerBindingType
INTEGER
}
ubiDhcpServerBindingIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiDhcpServerBindingEntry 1 }
ubiDhcpServerBindingIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiDhcpServerBindingEntry 2 }
ubiDhcpServerBindingMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiDhcpServerBindingEntry 3 }
ubiDhspServerBindingLeaseExpiration OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiDhcpServerBindingEntry 4 }
ubiDhcpServerBindingType OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
manual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiDhcpServerBindingEntry 5 }
-- ***********************************************************
-- dhcp Server NetworkPool Single Range table
-- ***********************************************************
ubiDhcpServerPoolSingleRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpServerPoolSingleRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ranges that are configured on this server."
::= { ubiDhcpServerMIBObjects 9 }
ubiDhcpServerPoolSingleRangeEntry OBJECT-TYPE
SYNTAX UbiDhcpServerPoolSingleRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A logical row in the dhcpSingleRangeTable."
INDEX { ubiDhcpServerPoolSingleRangePoolIndex,
ubiDhcpServerPoolSingleRangeIpAddr }
::= { ubiDhcpServerPoolSingleRangeTable 1 }
UbiDhcpServerPoolSingleRangeEntry ::= SEQUENCE {
ubiDhcpServerPoolSingleRangePoolIndex
INTEGER,
ubiDhcpServerPoolSingleRangeIpAddr
IpAddress,
ubiDhcpServerPoolSingleRangeRowstatus
RowStatus
}
ubiDhcpServerPoolSingleRangePoolIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiDhcpServerPoolSingleRangeEntry 1 }
ubiDhcpServerPoolSingleRangeIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the address in the range. The value
of range start must be not equal to the value of other ranges."
::= { ubiDhcpServerPoolSingleRangeEntry 2 }
ubiDhcpServerPoolSingleRangeRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"row status"
::= { ubiDhcpServerPoolSingleRangeEntry 3 }
-- ***********************************************************
-- dhcp Server Info Table
-- ***********************************************************
ubiDhcpServerInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpServerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpServerMIBObjects 10 }
ubiDhcpServerInfoEntry OBJECT-TYPE
SYNTAX UbiDhcpServerInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { noIndex }
::= { ubiDhcpServerInfoTable 1 }
UbiDhcpServerInfoEntry ::=
SEQUENCE {
ubiDhcpServerAdminStatus
INTEGER
}
ubiDhcpServerAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
locked(0),
unlocked(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"setting dhcp server service"
::= { ubiDhcpServerInfoEntry 1 }
-- ***********************************************************
-- dhcp lease-time mode
-- ***********************************************************
ubiDhcpLeaseTimeMode OBJECT IDENTIFIER ::= { ubiDhcpServerMIBObjects 11 }
ubiDhcpLeaseTimeModeDays OBJECT-TYPE
SYNTAX Integer32(0..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"manual lease-time mode days configuration"
::= { ubiDhcpLeaseTimeMode 1 }
ubiDhcpLeaseTimeModeHours OBJECT-TYPE
SYNTAX Integer32(0..24)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"manual lease-time mode hours configuration"
::= { ubiDhcpLeaseTimeMode 2 }
ubiDhcpLeaseTimeModeMinutes OBJECT-TYPE
SYNTAX Integer32(0..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"manual lease-time mode minutes configuration"
::= { ubiDhcpLeaseTimeMode 3 }
ubiDhcpLeaseTimeModeStatus OBJECT-TYPE
SYNTAX INTEGER
{
noLease(0),
infinite(1),
manual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"global lease-time mode configuration"
::= { ubiDhcpLeaseTimeMode 4 }
-- ***********************************************************
-- dhcp Relay Info Table
-- ***********************************************************
ubiDhcpRelayMIBObjects OBJECT IDENTIFIER ::= { ubiDhcpMIB 2 }
ubiDhcpRelayInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpRelayInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpRelayMIBObjects 1 }
ubiDhcpRelayInfoEntry OBJECT-TYPE
SYNTAX UbiDhcpRelayInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { noIndex }
::= { ubiDhcpRelayInfoTable 1 }
UbiDhcpRelayInfoEntry ::=
SEQUENCE {
ubiDhcpRelayAdminStatus
INTEGER,
ubiDhcpRelayOption82Status
INTEGER,
ubiDhcpRelayOption82Policy
INTEGER,
ubiDhcpRelayBindingListDisplayOption
INTEGER,
ubiDhcpRelayVerifyMAC
INTEGER
}
ubiDhcpRelayAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
locked(0),
unlocked(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"setting dhcp relay agent service"
::= { ubiDhcpRelayInfoEntry 1 }
ubiDhcpRelayOption82Status OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpRelayInfoEntry 2 }
ubiDhcpRelayOption82Policy OBJECT-TYPE
SYNTAX INTEGER
{
drop(0),
keep(1),
replace(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpRelayInfoEntry 3 }
ubiDhcpRelayBindingListDisplayOption OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpRelayInfoEntry 4 }
ubiDhcpRelayVerifyMAC OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpRelayInfoEntry 5 }
-- ***********************************************************
-- dhcp Relay Server Ip Table
-- ***********************************************************
ubiDhcpRelayServerIPTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpRelayServerIPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpRelayMIBObjects 2 }
ubiDhcpRelayServerIPEntry OBJECT-TYPE
SYNTAX UbiDhcpRelayServerIPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ubiDhcpRelayServerIP }
::= { ubiDhcpRelayServerIPTable 1 }
UbiDhcpRelayServerIPEntry ::=
SEQUENCE {
ubiDhcpRelayServerIP
IpAddress,
ubiDhcpRelayServerIPRowStatus
RowStatus
}
ubiDhcpRelayServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpRelayServerIPEntry 1 }
ubiDhcpRelayServerIPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpRelayServerIPEntry 2 }
-- ***********************************************************
-- dhcp Relay Statistics Table
-- ***********************************************************
ubiDhcpRelayStatistics OBJECT IDENTIFIER ::= { ubiDhcpRelayMIBObjects 3 }
ubiDhcpRelayCurPktDiscover OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of discover packets received from members."
::= { ubiDhcpRelayStatistics 3 }
ubiDhcpRelayCurPktReq OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of request packets received from members."
::= { ubiDhcpRelayStatistics 4 }
ubiDhcpRelayCurPktOffer OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of offer packets received from dhcp server."
::= { ubiDhcpRelayStatistics 10 }
ubiDhcpRelayCurPktAck OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Ack packets received from dhcp server."
::= { ubiDhcpRelayStatistics 11 }
-- ***********************************************************
-- dhcp Snoop Info Table
-- ***********************************************************
ubiDhcpSnoopMIBObjects OBJECT IDENTIFIER ::= { ubiDhcpMIB 3 }
ubiDhcpSnoopInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpSnoopInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopMIBObjects 1 }
ubiDhcpSnoopInfoEntry OBJECT-TYPE
SYNTAX UbiDhcpSnoopInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { noIndex }
::= { ubiDhcpSnoopInfoTable 1 }
UbiDhcpSnoopInfoEntry ::=
SEQUENCE {
ubiDhcpSnoopAdminStatus
INTEGER,
ubiDhcpSnoopLeaseTimeExtention
Integer32,
ubiDhcpSnoopBlockLogClear
INTEGER,
ubiDhcpSnoopOption82Status
INTEGER,
ubiDhcpSnoopOption82Policy
INTEGER,
ubiDhcpSnoopVerifyMAC
INTEGER,
ubiDhcpSnoopBindingCount
Integer32,
ubiDhcpSnoopInvalidCount
Integer32
}
ubiDhcpSnoopAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
locked(0),
unlocked(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"dhcp block enable/disable status"
::= { ubiDhcpSnoopInfoEntry 1 }
ubiDhcpSnoopLeaseTimeExtention OBJECT-TYPE
SYNTAX Integer32 (0..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopInfoEntry 2 }
ubiDhcpSnoopBlockLogClear OBJECT-TYPE
SYNTAX INTEGER
{
clear (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopInfoEntry 3 }
ubiDhcpSnoopOption82Status OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopInfoEntry 4 }
ubiDhcpSnoopOption82Policy OBJECT-TYPE
SYNTAX INTEGER
{
drop(0),
keep(1),
replace(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopInfoEntry 5 }
ubiDhcpSnoopVerifyMAC OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopInfoEntry 6 }
ubiDhcpSnoopBindingCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total count of bindings"
::= { ubiDhcpSnoopInfoEntry 7 }
ubiDhcpSnoopInvalidCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total count of lease timeout bindings"
::= { ubiDhcpSnoopInfoEntry 8 }
-- ***********************************************************
-- ubiDhcpSnoopVlanTable
-- ***********************************************************
ubiDhcpSnoopVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpSnoopVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"listening interface list for block function"
::= { ubiDhcpSnoopMIBObjects 2 }
ubiDhcpSnoopVlanEntry OBJECT-TYPE
SYNTAX UbiDhcpSnoopVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ubiVlanId }
::= { ubiDhcpSnoopVlanTable 1 }
UbiDhcpSnoopVlanEntry ::=
SEQUENCE {
ubiDhcpSnoopVlanIfName
DisplayString,
ubiDhcpSnoopVlanRowStatus
RowStatus
}
ubiDhcpSnoopVlanIfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopVlanEntry 1 }
ubiDhcpSnoopVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopVlanEntry 2 }
-- ***********************************************************
-- dhcp Snoop Binding Table
-- ***********************************************************
ubiDhcpSnoopBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpSnoopBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"table"
::= { ubiDhcpSnoopMIBObjects 3 }
ubiDhcpSnoopBindingEntry OBJECT-TYPE
SYNTAX UbiDhcpSnoopBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { ubiDhcpSnoopBindingIndex}
::= { ubiDhcpSnoopBindingTable 1 }
UbiDhcpSnoopBindingEntry ::=
SEQUENCE {
ubiDhcpSnoopBindingIndex
INTEGER,
ubiDhcpSnoopBindingMacAddr
MacAddress,
ubiDhcpSnoopBindingIpAddr
IpAddress,
ubiDhcpSnoopBindingState
DisplayString,
ubiDhcpSnoopBindingVlanName
DisplayString,
ubiDhcpSnoopBindingPortName
DisplayString,
ubiDhcpSnoopBindingUpdate
INTEGER,
ubiDhcpSnoopBindingLeaseTime
Unsigned32,
}
ubiDhcpSnoopBindingIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopBindingEntry 1 }
ubiDhcpSnoopBindingMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopBindingEntry 2 }
ubiDhcpSnoopBindingIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopBindingEntry 3 }
ubiDhcpSnoopBindingState OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopBindingEntry 4 }
ubiDhcpSnoopBindingVlanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopBindingEntry 5 }
ubiDhcpSnoopBindingPortName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopBindingEntry 6 }
ubiDhcpSnoopBindingUpdate OBJECT-TYPE
SYNTAX INTEGER
{
update(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { ubiDhcpSnoopBindingEntry 7 }
ubiDhcpSnoopBindingLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"dhcp binding's lease time"
::= { ubiDhcpSnoopBindingEntry 8 }
-- ***********************************************************
-- dhcp Snoop Interface Table
-- ***********************************************************
ubiDhcpSnoopIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiDhcpSnoopIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains dhcp snoop interface information."
::= { ubiDhcpSnoopMIBObjects 4 }
ubiDhcpSnoopIfEntry OBJECT-TYPE
SYNTAX UbiDhcpSnoopIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for dhcp snoop interface."
INDEX { ifIndex }
::= { ubiDhcpSnoopIfTable 1 }
UbiDhcpSnoopIfEntry ::=
SEQUENCE {
ubiDhcpSnoopIfTrust INTEGER
}
ubiDhcpSnoopIfTrust OBJECT-TYPE
SYNTAX INTEGER {
none(0),
trusted(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Trust state of dhcp snoop interface."
::= { ubiDhcpSnoopIfEntry 1 }
-- ***********************************************************
-- ubiDaiMIB
-- ***********************************************************
ubiDaiMIBObjects OBJECT IDENTIFIER ::= { ubiDhcpMIB 4 }
ubiArpInspection OBJECT IDENTIFIER ::= { ubiDaiMIBObjects 1 }
-- ***********************************************************
-- ubiArpInspectionTable
-- ***********************************************************
ubiArpInspectTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiArpInspectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP Inspection Table"
::= { ubiArpInspection 1 }
ubiArpInspectEntry OBJECT-TYPE
SYNTAX UbiArpInspectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP Inspection Entry"
INDEX { ubiVlanId }
::= { ubiArpInspectTable 1 }
UbiArpInspectEntry ::= SEQUENCE {
ubiArpInspectRowStatus
RowStatus
}
ubiArpInspectRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create ARP Inspection on vlan"
::= { ubiArpInspectEntry 1 }
-- ***********************************************************
-- ubiArpInspectionValidateTable
-- ***********************************************************
ubiArpInspectValidateTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiArpInspectValidateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP Inspection Validate Table"
::= { ubiArpInspection 2 }
ubiArpInspectValidateEntry OBJECT-TYPE
SYNTAX UbiArpInspectValidateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP Inspection Validate Entry"
INDEX { noIndex }
::= { ubiArpInspectValidateTable 1 }
UbiArpInspectValidateEntry ::= SEQUENCE {
ubiArpInspectValidateDestMac
INTEGER,
ubiArpInspectValidateSrcMac
INTEGER,
ubiArpInspectValidateIpAddr
INTEGER,
ubiArpInspectValidateArpField
INTEGER
}
ubiArpInspectValidateDestMac OBJECT-TYPE
SYNTAX INTEGER
{
disable (0),
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Validate destination MAC address"
::= { ubiArpInspectValidateEntry 1 }
ubiArpInspectValidateSrcMac OBJECT-TYPE
SYNTAX INTEGER
{
disable (0),
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Validate source MAC address"
::= { ubiArpInspectValidateEntry 2 }
ubiArpInspectValidateIpAddr OBJECT-TYPE
SYNTAX INTEGER
{
disable (0),
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Validate IP address"
::= { ubiArpInspectValidateEntry 3 }
ubiArpInspectValidateArpField OBJECT-TYPE
SYNTAX INTEGER
{
disable (0),
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Validate ARP field"
::= { ubiArpInspectValidateEntry 4 }
-- ***********************************************************
-- ubiArpInspectLogInfoTable
-- ***********************************************************
ubiArpInspectLog OBJECT IDENTIFIER ::= { ubiArpInspection 3 }
ubiArpInspectLogInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiArpInspectLogInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP Inspection Logging Table."
::= { ubiArpInspectLog 1 }
ubiArpInspectLogInfoEntry OBJECT-TYPE
SYNTAX UbiArpInspectLogInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP Inspection Logging Entry."
INDEX { noIndex }
::= { ubiArpInspectLogInfoTable 1 }
UbiArpInspectLogInfoEntry ::= SEQUENCE {
ubiArpInspecLogInfoTotalLogBuffer
Integer32,
ubiArpInspecLogInfoLogRate
DisplayString,
ubiArpInspecLogInfoRepeatCount
Integer32,
ubiArpInspecLogInfoLogClear
Integer32
}
ubiArpInspecLogInfoTotalLogBuffer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of entires for log buffer"
::= { ubiArpInspectLogInfoEntry 1 }
ubiArpInspecLogInfoLogRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"number of entries/interval of Logging Rate"
::= { ubiArpInspectLogInfoEntry 2 }
ubiArpInspecLogInfoRepeatCount OBJECT-TYPE
SYNTAX Integer32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Repeat count for flush"
::= { ubiArpInspectLogInfoEntry 3 }
ubiArpInspecLogInfoLogClear OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Clear DAI Log information "
::= { ubiArpInspectLogInfoEntry 4 }
-- ***********************************************************
-- ubiArpInspectLogInfoTable
-- ***********************************************************
ubiArpInspectLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiArpInspectLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP Inspection Logging Table."
::= { ubiArpInspectLog 2 }
ubiArpInspectLogEntry OBJECT-TYPE
SYNTAX UbiArpInspectLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP Inspection Logging Entry."
INDEX { ubiArpInspecLogIndex }
::= { ubiArpInspectLogTable 1 }
UbiArpInspectLogEntry ::= SEQUENCE {
ubiArpInspecLogIndex
INTEGER,
ubiArpInspecLogIfName
DisplayString,
ubiArpInspectLogVlanName
DisplayString,
ubiArpInspectLogMacAddr
PhysAddress,
ubiArpInspectLogIpAddr
IpAddress,
ubiArpInspectLogCount
Integer32
}
ubiArpInspecLogIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiArpInspectLogEntry 1 }
ubiArpInspecLogIfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiArpInspectLogEntry 2 }
ubiArpInspectLogVlanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiArpInspectLogEntry 3 }
ubiArpInspectLogMacAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiArpInspectLogEntry 4 }
ubiArpInspectLogIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiArpInspectLogEntry 5 }
ubiArpInspectLogCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiArpInspectLogEntry 6 }
-- ***********************************************************
-- ubiArpTable
-- ***********************************************************
ubiArpInspectAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiArpInspectAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP Inspection permit Table"
::= { ubiArpInspection 4 }
ubiArpInspectAclEntry OBJECT-TYPE
SYNTAX UbiArpInspectAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ARP Inspection permit Entry"
INDEX { uibAclName, ubiVlanId }
::= { ubiArpInspectAclTable 1 }
UbiArpInspectAclEntry ::= SEQUENCE {
ubiArpInspectAclRowStatus
RowStatus
}
ubiArpInspectAclRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create ARP Inspection on vlan"
::= { ubiArpInspectAclEntry 1 }
-- ***********************************************************
--
-- ***********************************************************
-- the following two OBJECT IDENTIFIERS are used to define SNMPv2 Notifications
-- that are backward compatible with SNMPv1 Traps.
ubiDhcpMIBNotificationPrefix OBJECT IDENTIFIER ::= { ubiDhcpMIB 0 }
ubiDhcpMIBNotifications OBJECT IDENTIFIER ::= { ubiDhcpMIBNotificationPrefix 0 }
ubiDhcpServerInUseAddressHighNotification NOTIFICATION-TYPE
OBJECTS {
ubiAlarmIndex,
ubiAlarmId,
ubiAlarmType,
ubiAlarmSeverity,
ubiAlarmPhysicalLoc,
ubiAlarmLogicalLoc,
ubiAlarmCurStatus,
ubiAlarmAuxinfo,
ubiAlarmDateTime,
ubiAlarmStatus
}
STATUS current
DESCRIPTION
"A ubiDhcpServerInUseAddressHighNotification is sent
if address in use of dhcp server reaches high threshold."
::= { ubiDhcpMIBNotifications 1 }
ubiDhcpServerInUseAddressLowNotification NOTIFICATION-TYPE
OBJECTS {
ubiAlarmIndex,
ubiAlarmId,
ubiAlarmType,
ubiAlarmSeverity,
ubiAlarmPhysicalLoc,
ubiAlarmLogicalLoc,
ubiAlarmCurStatus,
ubiAlarmAuxinfo,
ubiAlarmDateTime,
ubiAlarmStatus
}
STATUS current
DESCRIPTION
"A ubiDhcpServerInUseAddressLowNotification is sent
if address in use of dhcp server reaches low threshold."
::= { ubiDhcpMIBNotifications 2 }
-- conformance information
ubiDhcpMIBConformance OBJECT IDENTIFIER ::= { ubiDhcpMIB 6 }
ubiDhcpMIBCompliances OBJECT IDENTIFIER ::= { ubiDhcpMIBConformance 1 }
ubiDhcpMIBGroups OBJECT IDENTIFIER ::= { ubiDhcpMIBConformance 2 }
-- compliance statements
ubiDhcpMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the ubiquoss dhcp MIB."
MODULE -- this module
MANDATORY-GROUPS { ubiDhcpMIBGroup,
ubiDhcpMIBStatusChangeNotifGroup
}
GROUP ubiDhcpMIBGroup
DESCRIPTION
"This group is applicable for implementations which
need information for dhcp server."
GROUP ubiDhcpMIBStatusChangeNotifGroup
DESCRIPTION
"This group is applicable for implementations which
need status change notifications for dhcp server."
::= { ubiDhcpMIBCompliances 1 }
-- units of conformance
ubiDhcpMIBGroup OBJECT-GROUP
OBJECTS {
ubiDhcpTotalSubnets,
ubiDhcpFreeAddress,
ubiDhcpTotalAddress,
ubiDhcpInUse,
ubiDhcpAutomatic,
ubiDhcpManual,
ubiDhcpLowThreshold,
ubiDhcpHighThreshold,
ubiDhcpFreeAddrValue,
ubiDhcpFreeAddrUnit,
ubiDhcpPoolSubnetName,
ubiDhcpPoolSubnet,
ubiDhcpPoolSubnetMask,
ubiDhcpPoolSubnetFreeAddress,
ubiDhcpPoolSubnetTotalAddress,
ubiDhcpPoolSubnetInUse
}
STATUS current
DESCRIPTION
"ubiquoss dhcp."
::= { ubiDhcpMIBGroups 1 }
ubiDhcpMIBStatusChangeNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ubiDhcpServerInUseAddressHighNotification,
ubiDhcpServerInUseAddressLowNotification
}
STATUS current
DESCRIPTION
"A notification group providing alarm notification
for dhcp. "
::= { ubiDhcpMIBGroups 2 }
-- compliance statements
ubiDaiMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the ubiquoss dhcp MIB."
MODULE -- this module
MANDATORY-GROUPS {
ubiDaiMIBGroup
}
GROUP ubiDaiMIBGroup
DESCRIPTION
""
::= { ubiDhcpMIBCompliances 2 }
-- units of conformance
ubiDaiMIBGroup OBJECT-GROUP
OBJECTS {
ubiArpInspectRowStatus,
ubiArpInspectValidateDestMac,
ubiArpInspectValidateSrcMac,
ubiArpInspectValidateIpAddr,
ubiArpInspectValidateArpField,
ubiArpInspecLoggingTotalLogBuffer,
ubiArpInspecLoggingLogNum
}
STATUS current
DESCRIPTION
""
::= { ubiDhcpMIBGroups 3 }
END