mibs/MIBS/ubiquoss/UBQS-IP-MIB

792 lines
24 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- UBQS-IP-MIB : Ubiquoss IP Information MIB
--
-- Dec 2010, Park Hyung Eun
--
-- Copyright (c) 2010 by Ubiquoss, Corp.
--
-- All rights reserved.
-- ***************************************************************
UBQS-IP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Integer32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
RowStatus,
TimeStamp,
DisplayString,
TruthValue,
TEXTUAL-CONVENTION,
PhysAddress
FROM SNMPv2-TC
InetAddress,
InetAddressType,
InetAddressPrefixLength,
FROM INET-ADDRESS-MIB
InterfaceIndex
FROM IF-MIB
ubiMgmtv2
FROM UBQS-SMI;
ubiIpMIB MODULE-IDENTITY
LAST-UPDATED "201012280000Z"
ORGANIZATION "Ubiquoss Corp."
CONTACT-INFO
" Ubiquoss
Customer Service
Postal: 24F Milennium B/D,
467-12, Dogok-Dong,
GangNam-Gu, Seoul 135-270
Korea
Tel: 82-2-2190-3100"
DESCRIPTION
"This MIB module defines IP information."
::= { ubiMgmtv2 14 }
-- ***********************************************************
-- Textual Conventions
-- ***********************************************************
-- ***************************************************************
-- ubiInterfaceMIB
-- ***************************************************************
ubiIpMIBNotificationPrefix OBJECT IDENTIFIER ::= { ubiIpMIB 0 }
ubiIpMIBObjects OBJECT IDENTIFIER ::= { ubiIpMIB 1 }
ubiPingMIBObjects OBJECT IDENTIFIER ::= { ubiIpMIB 2 }
ubiIpMIBConformance OBJECT IDENTIFIER ::= { ubiIpMIB 3 }
ubiPingGlobal OBJECT IDENTIFIER ::= { ubiPingMIBObjects 1 }
ubiPingSend OBJECT IDENTIFIER ::= { ubiPingMIBObjects 2 }
ubiPingResults OBJECT IDENTIFIER ::= { ubiPingMIBObjects 3 }
-- ***************************************************************
-- ubiIpMIBNotificationPrefix
-- ***************************************************************
ubiIpMIBNotifications OBJECT IDENTIFIER ::= { ubiIpMIBNotificationPrefix 1 }
ubiPingMIBNotifications OBJECT IDENTIFIER ::= { ubiIpMIBNotificationPrefix 2 }
ubiPingSendCompletion NOTIFICATION-TYPE
OBJECTS {
ubiPingSendCompleted,
ubiPingSendPackets,
ubiPingReceivedPackets
}
STATUS current
DESCRIPTION
"This notification is sent at the completion
of the sequence of pings."
::= { ubiPingMIBNotifications 1 }
-- ***********************************************************
-- ubiIpAddrTable
-- ***********************************************************
ubiIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of addressing information relevant to
this entity's IP addresses."
::= { ubiIpMIBObjects 1 }
ubiIpAddrEntry OBJECT-TYPE
SYNTAX UbiIpAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The addressing information for one of this
entity's IP addresses."
INDEX { ubiIpAddrType, ubiIpAddress, ubiIpAddrPrefixLen }
::= { ubiIpAddrTable 1 }
UbiIpAddrEntry ::= SEQUENCE {
ubiIpAddrType InetAddressType,
ubiIpAddress InetAddress,
ubiIpAddrIfIndex InterfaceIndex,
ubiIpAddrPrefixLen InetAddressPrefixLength,
ubiIpAddrStatus INTEGER,
ubiIpAddrRowstatus RowStatus,
}
ubiIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address type.
ipv4(1) An IPv4 address as defined by the
InetAddressIPv4 textual convention.
ipv6(2) An IPv6 address as defined by the
InetAddressIPv6 textual convention."
::= { ubiIpAddrEntry 1 }
ubiIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address to which this entry's addressing
information pertains."
::= { ubiIpAddrEntry 2 }
ubiIpAddrPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The prefix length associated with the IP address."
::= { ubiIpAddrEntry 3 }
ubiIpAddrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index value which uniquely identifies
the interface to which this entry is applicable."
::= { ubiIpAddrEntry 4 }
ubiIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicate whether this entry is primary or not."
DEFVAL { primary }
::= { ubiIpAddrEntry 5 }
ubiIpAddrRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create a new row or
delete an existing row in this table."
::= { ubiIpAddrEntry 6 }
-- ***********************************************************
-- ubiInetRouteTable
-- ***********************************************************
ubiInetRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiInetRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of addressing information relevant to
this entity's IP addresses."
::= { ubiIpMIBObjects 2 }
ubiInetRouteEntry OBJECT-TYPE
SYNTAX UbiInetRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The addressing information for one of this
entity's IP addresses."
INDEX { ubiInetRouteInstance,
ubiInetRouteDestType, ubiInetRouteDest, ubiInetRouteDestPfxLen,
ubiInetRouteNextHopType, ubiInetRouteNextHop, ubiInetRouteIfIndex }
::= { ubiInetRouteTable 1 }
UbiInetRouteEntry ::= SEQUENCE {
ubiInetRouteInstance Unsigned32,
ubiInetRouteDestType InetAddressType,
ubiInetRouteDest InetAddress,
ubiInetRouteDestPfxLen InetAddressPrefixLength,
ubiInetRouteNextHopType InetAddressType,
ubiInetRouteNextHop InetAddress,
ubiInetRouteIfIndex InterfaceIndex,
ubiInetRoutetype INTEGER,
ubiInetRouteProto INTEGER,
ubiInetRouteMetric1 Integer32,
ubiInetRouteMetric2 Integer32,
ubiInetRouteMetric3 Integer32,
ubiInetRouteMetric4 Integer32,
ubiInetRouteMetric5 Integer32,
ubiInetRouteStatus INTEGER,
ubiInetRouteDistance Integer32,
ubiInetRouteTag Unsigned32,
ubiInetRouteNextHopName DisplayString,
ubiInetRouteRowstatus RowStatus,
}
ubiInetRouteInstance OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The instance identifier of the (conceptual) routing table
containing this route."
::= { ubiInetRouteEntry 1 }
ubiInetRouteDestType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address type.
ipv4(1) An IPv4 address as defined by the
InetAddressIPv4 textual convention.
ipv6(2) An IPv6 address as defined by the
InetAddressIPv6 textual convention."
::= { ubiInetRouteEntry 2 }
ubiInetRouteDest OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { ubiInetRouteEntry 3 }
ubiInetRouteDestPfxLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 4 }
ubiInetRouteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 5 }
ubiInetRouteNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 6 }
ubiInetRouteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 7 }
ubiInetRoutetype OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2),
direct(3),
indirect(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 8 }
ubiInetRouteProto OBJECT-TYPE
SYNTAX INTEGER {
other(1),
local(2),
netmgmt(3),
icmp(4),
egp(5),
ggp(6),
hello(7),
rip(8),
isis(9),
esis(10),
ciscoIgrp(11),
bbnSpfIgp(12),
ospf(13),
bgp(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 9 }
ubiInetRouteMetric1 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 10 }
ubiInetRouteMetric2 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 11 }
ubiInetRouteMetric3 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 12 }
ubiInetRouteMetric4 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 13 }
ubiInetRouteMetric5 OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 14 }
ubiInetRouteStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
inactive(2),
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 15 }
ubiInetRouteDistance OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 16 }
ubiInetRouteTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 17 }
ubiInetRouteNextHopName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 18 }
ubiInetRouteRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { ubiInetRouteEntry 19 }
-- ***********************************************************
-- ubiIpv6NeighborTable
-- ***********************************************************
ubiIpv6NeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiIpv6NeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of addressing information relevant to
this entity's IPv6 addresses."
::= { ubiIpMIBObjects 3 }
ubiIpv6NeighborEntry OBJECT-TYPE
SYNTAX UbiIpv6NeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The addressing information for one of this
entity's IPv6 addresses."
INDEX { ubiIpv6NeighborIfIndex, ubiIpv6NeighborNetAddress }
::= { ubiIpv6NeighborTable 1 }
UbiIpv6NeighborEntry ::= SEQUENCE {
ubiIpv6NeighborIfIndex InterfaceIndex,
ubiIpv6NeighborPhysAddress PhysAddress,
ubiIpv6NeighborNetAddress InetAddress,
ubiIpv6NeighborType INTEGER,
ubiIpv6NeighborState INTEGER,
ubiIpv6NeighborLastUpdated TimeStamp,
ubiIpv6NeighborRowstatus RowStatus
}
ubiIpv6NeighborIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The inde value which uniquely identifies
the interface to which this entry is applicable"
::= { ubiIpv6NeighborEntry 1 }
ubiIpv6NeighborPhysAddress OBJECT-TYPE
SYNTAX PhysAddress (SIZE(0..65535))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The media-dependent `physical' address. This object should
return 0 when this entry is in the 'incomplete' state.
As the entries in this table are typically not persistent
when this object is written the entity should not save the
change to non-volatile storage. Note: a stronger
requirement is not used because this object was previously
defined."
::= { ubiIpv6NeighborEntry 2 }
ubiIpv6NeighborNetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ipv6Address corresponding to the media-dependent
`physical' address.
This object predates the rule limiting index objects to a
max access value of 'not-accessible' and so continues to use
a value of 'read-create'."
::= { ubiIpv6NeighborEntry 3 }
ubiIpv6NeighborType OBJECT-TYPE
SYNTAX INTEGER {
dynamic(0),
static(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of mapping.
Setting this object to the value invalid(2) has the effect
of invalidating the corresponding entry in the
ubiIpv6NeighborTable. That is, it effectively dis-associates
the interface identified with said entry from the mapping
identified with said entry. It is an implementation-
specific matter as to whether the agent removes an
invalidated entry from the table. Accordingly, management
stations must be prepared to receive tabular information
from agents that corresponds to entries not currently in
use. Proper interpretation of such entries requires
examination of the relevant ubiIpv6NeighborType object.
As the entries in this table are typically not persistent
when this object is written the entity should not save the
change to non-volatile storage. Note: a stronger
requirement is not used because this object was previously
defined."
::= { ubiIpv6NeighborEntry 4 }
ubiIpv6NeighborState OBJECT-TYPE
SYNTAX INTEGER {
reachable(1), -- confirmed reachability
stale(2), -- unconfirmed reachability
delay(3), -- waiting for reachability
-- confirmation before entering
-- the probe state
probe(4), -- actively probing
invalid(5), -- an invalidated mapping
unknown(6), -- state can not be determined
-- for some reason.
incomplete(7) -- address resolution is being
-- performed.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Neighbor Unreachability Detection [3] state for the
interface when the address mapping in this entry is used.
If Neighbor Unreachability Detection is not in use,
this object is always unknown(6)."
REFERENCE "RFC2461"
::= { ubiIpv6NeighborEntry 5 }
ubiIpv6NeighborLastUpdated OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then this object contains a zero value."
::= { ubiIpv6NeighborEntry 6 }
ubiIpv6NeighborRowstatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
As all objects in this conceptual row have default values, a
row can be created and made active by setting this object
appropriately.
The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified. The value of this object has no effect on
whether other objects in this conceptual row can be
modified."
::= { ubiIpv6NeighborEntry 7 }
-- ***********************************************************
-- ubiIpPingObject
-- ***********************************************************
-- ubiPingSend
ubiPingSendProto OBJECT-TYPE
SYNTAX INTEGER {
other(1),
ip(2),
ipv6(3)
}
ACCESS read-write
STATUS current
DESCRIPTION
"The protocol to use."
::= { ubiPingSend 1 }
ubiPingSendTarget OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS current
DESCRIPTION
"The address of the device to be pinged."
::= { ubiPingSend 2 }
ubiPingSendRepeat OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the number of ping packets to send
to the target."
DEFVAL { 5 }
::= { ubiPingSend 3 }
ubiPingSendPacketSize OBJECT-TYPE
SYNTAX Integer32(0..60000)
ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the size of ping packets to send
to the target."
DEFVAL { 100 }
::= { ubiPingSend 4 }
ubiPingSendTimeout OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the amount of time to wait for a response."
DEFVAL { 2000 }
::= { ubiPingSend 5 }
ubiPingSendInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the amount of time to wait before
sending the next packet."
::= { ubiPingSend 6 }
ubiPingSendSrcAddr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the sender IP address for sending packets."
::= { ubiPingSend 7 }
ubiPingSendTTL OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the TTL."
::= { ubiPingSend 8 }
ubiPingSendTos OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Type Of Service."
::= { ubiPingSend 9 }
ubiPingSendDF OBJECT-TYPE
SYNTAX INTEGER {
none(0),
do(1),
dont(2)
}
ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the DF bit in IP header. dont(2) means
a packet cannot be fragmented."
::= { ubiPingSend 10 }
ubiPingSendExecute OBJECT-TYPE
SYNTAX INTEGER {
send(1)
}
ACCESS read-write
STATUS current
DESCRIPTION
"Send the ping packets when value is set to
send(1)."
::= { ubiPingSend 15 }
-- ubiPingResults
ubiPingSendCompleted OBJECT-TYPE
SYNTAX TruthValue
ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Set to true when all the packets in this sequence have been
either responded to or timed out."
::= { ubiPingResults 1 }
ubiPingSendPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The total number of the sending ping."
::= { ubiPingResults 2 }
ubiPingReceivedPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The total number of the received ping."
::= { ubiPingResults 3 }
-- ***********************************************************
-- ubiIpMIBConformance
-- ***********************************************************
ubiIpMIBCompliances OBJECT IDENTIFIER ::= { ubiIpMIBConformance 1 }
ubiIpMIBGroups OBJECT IDENTIFIER ::= { ubiIpMIBConformance 2 }
-- Compliance
ubiIpMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the UBQS-IP-MIB"
MODULE -- this module
MANDATORY-GROUPS {
ubiIpAddrGroup,
ubiPingGroup
}
GROUP ubiIpAddrGroup
DESCRIPTION
"The ubiIpAddrGroup is applicable for implementations which
need to get the address information of the system."
GROUP ubiPingGroup
DESCRIPTION
"The ubiPingGroup is applicable for implementations which
need to test the ping."
::= { ubiIpMIBCompliances 2 }
ubiIpAddrGroup OBJECT-GROUP
OBJECTS {
ubiIpAddrType,
ubiIpAddress,
ubiIpAddrIfIndex,
ubiIpAddrPrefixLen ,
ubiIpAddrStatus ,
ubiIpAddrRowstatus
}
STATUS current
DESCRIPTION
"A collection of objects containing
information about the address information of system."
::= { ubiIpMIBGroups 1 }
ubiPingGroup OBJECT-GROUP
OBJECTS {
ubiPingSendProto,
ubiPingSendTarget,
ubiPingSendRepeat,
ubiPingSendPacketSize ,
ubiPingSendTimeout ,
ubiPingSendInterval,
ubiPingSendSrcAddr,
ubiPingSendTtl ,
ubiPingSendTos,
ubiPingSendDF,
ubiPingSendExecute ,
ubiPingSendCompleted,
ubiPingSendPackets,
ubiPingReceivedPackets
}
STATUS current
DESCRIPTION
"A collection of objects containing
information about the ping."
::= { ubiIpMIBGroups 2 }
END