mibs/MIBS/ubiquoss/UBQS-MPLS-MIB

676 lines
20 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- UBQS-MPLS-MIB : Ubiquoss MPLS MIB
--
-- Jun 2011, Park Hyung Eun
--
-- Copyright (c) 2011 by Ubiquoss, Corp.
--
-- All rights reserved.
-- ***************************************************************
UBQS-MPLS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Integer32,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
InetAddress,
InetAddressType,
InetAddressPrefixLength,
InetAddressPrefixLength
FROM INET-ADDRESS-MIB
IpAddress,
RowStatus,
TimeStamp,
DisplayString,
TruthValue,
MacAddress,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
mplsStdMIB, MplsLSPID, MplsLabel, MplsBitRate,
MplsOwner
FROM MPLS-TC-STD-MIB -- [RFC3811]
ubiMplsGroupMIB
FROM UBQS-SMI;
ubiMplsMIB MODULE-IDENTITY
LAST-UPDATED "201106220000Z"
ORGANIZATION "Ubiquoss Corp."
CONTACT-INFO
" Ubiquoss
Customer Service
Postal: 24F Milennium B/D,
467-12, Dogok-Dong,
GangNam-Gu, Seoul 135-270
Korea
Tel: 82-2-2190-3100"
DESCRIPTION
"This MIB module defines the MPLS protocol."
::= { ubiMplsGroupMIB 1 }
-- ***********************************************************
-- Textual Conventions
-- ***********************************************************
UbiMplsOpcode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This enumeration defines the operation code for MPLS.
The values are defined as follows:
other(0) - None of the following.
push(1) - Add a label onto the label stack.
pop(2) - The top label is removed.
swap(3) - The top label in the label stack
is replaced with another.
"
SYNTAX INTEGER {
other(0),
push(1),
pop(2),
swap(3),
pop_for_vpn(4),
dlvr_to_ip(5),
push_and_lookup(6),
push_for_vc(7),
push_and_lookup_for_vc(8),
pop_for_vc(9),
swap_and_lookup(10),
mpls_no_op(11),
ftn_lookup(12)
}
-- ***************************************************************
-- ubiMplsMIB
-- ***************************************************************
ubiMplsMIBNotificationPrefix OBJECT IDENTIFIER ::= { ubiMplsMIB 0 }
ubiMplsMIBObjects OBJECT IDENTIFIER ::= { ubiMplsMIB 1 }
ubiMplsMIBConformance OBJECT IDENTIFIER ::= { ubiMplsMIB 2 }
ubiMplsGlobal OBJECT IDENTIFIER ::= { ubiMplsMIBObjects 1 }
ubiMplsTrace OBJECT IDENTIFIER ::= { ubiMplsMIBObjects 10 }
ubiLspTraceSend OBJECT IDENTIFIER ::= { ubiMplsTrace 1 }
ubiLspTraceResult OBJECT IDENTIFIER ::= { ubiMplsTrace 2 }
-- ***************************************************************
-- ubiPwMIBNotificationPrefix
-- ***************************************************************
ubiMplsMIBNotifications OBJECT IDENTIFIER ::= { ubiMplsMIBNotificationPrefix 1 }
ubiLspTraceSendCompletion NOTIFICATION-TYPE
OBJECTS {
ubiLSPTraceSendCompleted
}
STATUS current
DESCRIPTION
""
::= { ubiMplsMIBNotifications 1 }
-- ***********************************************************
-- ubiMplsGlobal
-- ***********************************************************
-- ***********************************************************
-- ubiMplsInterfaceTable
-- ***********************************************************
ubiMplsInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiMplsInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { ubiMplsMIBObjects 2 }
ubiMplsInterfaceEntry OBJECT-TYPE
SYNTAX UbiMplsInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ifIndex }
::= { ubiMplsInterfaceTable 1 }
UbiMplsInterfaceEntry ::= SEQUENCE {
ubiMplsIfLabelSpace INTEGER
}
ubiMplsIfLabelSpace OBJECT-TYPE
SYNTAX INTEGER {
none(-1),
perPlatform(0) -- TODO perInterface
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiMplsInterfaceEntry 1 }
-- ***********************************************************
-- ubiMplsFtnTable
-- ***********************************************************
ubiMplsFtnTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiMplsFtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { ubiMplsMIBObjects 3 }
ubiMplsFtnEntry OBJECT-TYPE
SYNTAX UbiMplsFtnEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ubiMplsFtnIndex }
::= { ubiMplsFtnTable 1 }
UbiMplsFtnEntry ::= SEQUENCE {
ubiMplsFtnIndex Integer32,
ubiMplsFtnFecAddress IpAddress,
ubiMplsFtnFecPrefixLen InetAddressPrefixLength,
ubiMplsFtnTunnelId Integer32,
ubiMplsFtnOpcode UbiMplsOpcode,
ubiMplsFtnOutLabel MplsLabel,
ubiMplsFtnOutIfIndex Integer32,
ubiMplsFtnNexthopAddress IpAddress,
ubiMplsFtnOwner MplsOwner,
ubiMplsFtnLspType INTEGER,
ubiMplsFtnRowStatus RowStatus
}
ubiMplsFtnIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { ubiMplsFtnEntry 1 }
ubiMplsFtnFecAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiMplsFtnEntry 2 }
ubiMplsFtnFecPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiMplsFtnEntry 3 }
ubiMplsFtnTunnelId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { ubiMplsFtnEntry 4 }
ubiMplsFtnOpcode OBJECT-TYPE
SYNTAX UbiMplsOpcode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This enumeration defines the operation code for MPLS.
The values are defined as follows:
other(0) - None of the following.
push(1) - Add a label onto the label stack.
pop(2) - The top label is removed.
swap(3) - The top label in the label stack
is replaced with another.
"
::= { ubiMplsFtnEntry 5 }
ubiMplsFtnOutLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiMplsFtnEntry 6 }
ubiMplsFtnOutIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiMplsFtnEntry 7 }
ubiMplsFtnNexthopAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiMplsFtnEntry 8 }
ubiMplsFtnOwner OBJECT-TYPE
SYNTAX MplsOwner
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The values of
this enumeration are defined as follows:
unknown(1) - the local network management
subsystem cannot discern which
component created the object.
other(2) - the local network management
subsystem is able to discern which component
created the object, but the component is not
listed within the following choices,
e.g., command line interface (cli).
snmp(3) - The Simple Network Management Protocol
was used to configure this object initially.
ldp(4) - The Label Distribution Protocol was
used to configure this object initially.
crldp(5) - The Constraint-Based Label Distribution
Protocol was used to configure this object
initially.
rsvpTe(6) - The Resource Reservation Protocol was
used to configure this object initially.
policyAgent(7) - A policy agent (perhaps in
combination with one of the above protocols) was
used to configure this object initially.
An object created by any of the above choices
MAY be modified or destroyed by the same or a
different choice."
::= { ubiMplsFtnEntry 9 }
ubiMplsFtnLspType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
primary(1),
secondary(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiMplsFtnEntry 10 }
ubiMplsFtnRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { ubiMplsFtnEntry 11 }
-- ***********************************************************
-- ubiMplsIlmTable
-- ***********************************************************
ubiMplsIlmTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiMplsIlmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { ubiMplsMIBObjects 4 }
ubiMplsIlmEntry OBJECT-TYPE
SYNTAX UbiMplsIlmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ubiMplsIlmIndex }
::= { ubiMplsIlmTable 1 }
UbiMplsIlmEntry ::= SEQUENCE {
ubiMplsIlmIndex Integer32,
ubiMplsIlmFecAddress IpAddress,
ubiMplsIlmFecPrefixLen InetAddressPrefixLength,
ubiMplsIlmOpcode UbiMplsOpcode,
ubiMplsIlmInLabel MplsLabel,
ubiMplsIlmInIfIndex Integer32,
ubiMplsIlmOutLabel MplsLabel,
ubiMplsIlmOutIfIndex Integer32,
ubiMplsIlmNexthopAddress IpAddress,
ubiMplsIlmOwner MplsOwner,
ubiMplsIlmLspType INTEGER,
ubiMplsIlmRowStatus RowStatus
}
ubiMplsIlmIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { ubiMplsIlmEntry 1 }
ubiMplsIlmFecAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { ubiMplsIlmEntry 2 }
ubiMplsIlmFecPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { ubiMplsIlmEntry 3 }
ubiMplsIlmOpcode OBJECT-TYPE
SYNTAX UbiMplsOpcode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This enumeration defines the operation code for MPLS.
The values are defined as follows:
other(0) - None of the following.
push(1) - Add a label onto the label stack.
pop(2) - The top label is removed.
swap(3) - The top label in the label stack
is replaced with another.
"
::= { ubiMplsIlmEntry 4 }
ubiMplsIlmInLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { ubiMplsIlmEntry 5 }
ubiMplsIlmInIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { ubiMplsIlmEntry 6 }
ubiMplsIlmOutLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { ubiMplsIlmEntry 7 }
ubiMplsIlmOutIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { ubiMplsIlmEntry 8 }
ubiMplsIlmNexthopAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiMplsIlmEntry 9 }
ubiMplsIlmOwner OBJECT-TYPE
SYNTAX MplsOwner
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The values of
this enumeration are defined as follows:
unknown(1) - the local network management
subsystem cannot discern which
component created the object.
other(2) - the local network management
subsystem is able to discern which component
created the object, but the component is not
listed within the following choices,
e.g., command line interface (cli).
snmp(3) - The Simple Network Management Protocol
was used to configure this object initially.
ldp(4) - The Label Distribution Protocol was
used to configure this object initially.
crldp(5) - The Constraint-Based Label Distribution
Protocol was used to configure this object
initially.
rsvpTe(6) - The Resource Reservation Protocol was
used to configure this object initially.
policyAgent(7) - A policy agent (perhaps in
combination with one of the above protocols) was
used to configure this object initially.
An object created by any of the above choices
MAY be modified or destroyed by the same or a
different choice."
::= { ubiMplsIlmEntry 10 }
ubiMplsIlmLspType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
primary(1),
secondary(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiMplsIlmEntry 11 }
ubiMplsIlmRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
::= { ubiMplsIlmEntry 12 }
-- ***********************************************************
-- ubiMplsTraceSend
-- ***********************************************************
ubiLspTraceSendFecType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ldp(1),
rsvp(2),
ipv4(3),
ipv6(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiLspTraceSend 1 }
ubiLspTraceSendTargetType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ipv4(1),
ipv6(2),
rsvp_tunnel(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiLspTraceSend 2 }
ubiLspTraceSendTarget OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiLspTraceSend 3 }
ubiLspTraceSrcAddr OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiLspTraceSend 4 }
ubiLspTraceSendForceExplicitNull OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiLspTraceSend 5 }
ubiLspTraceSendExecute OBJECT-TYPE
SYNTAX INTEGER {
send(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
""
::= { ubiLspTraceSend 15 }
-- ***********************************************************
-- ubiLspTraceResult
-- ***********************************************************
ubiLspTraceSendCompleted OBJECT-TYPE
SYNTAX INTEGER {
success(1),
fail(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiLspTraceResult 1 }
-- Table
ubiMplsTraceResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF UbiMplsTraceResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { ubiLspTraceResult 2 }
ubiMplsTraceResultEntry OBJECT-TYPE
SYNTAX UbiMplsTraceResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
INDEX { ubiMplsLspTraceResultIndex }
::= { ubiMplsTraceResultTable 1 }
UbiMplsTraceResultEntry ::= SEQUENCE {
ubiLspTraceResultIndex Integer32,
ubiLspTraceResultInLabel MplsLabel,
ubiLspTraceResultHopAddr InetAddress
}
ubiLspTraceResultIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
""
::= { ubiMplsTraceResultEntry 1 }
ubiLspTraceResultInLabel OBJECT-TYPE
SYNTAX MplsLabel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiMplsTraceResultEntry 2 }
ubiLspTraceResultHopAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { ubiMplsTraceResultEntry 3 }
-- ***********************************************************
-- ubiMplsMIBConformance
-- ***********************************************************
ubiMplsMIBCompliances OBJECT IDENTIFIER ::= { ubiMplsMIBConformance 1 }
ubiMplsMIBGroups OBJECT IDENTIFIER ::= { ubiMplsMIBConformance 2 }
-- Compliance
ubiMplsMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the UBQS-MPLS-MIB"
MODULE -- this module
MANDATORY-GROUPS {
ubiMplsMIBGroup
}
GROUP ubiMplsMIBGroup
DESCRIPTION
"The ubiMplsMIBGroup is applicable for implementations which
need to get the MPLS information."
::= { ubiMplsMIBCompliances 1 }
ubiMplsMIBGroup OBJECT-GROUP
OBJECTS {
}
STATUS current
DESCRIPTION
"A collection of objects containing
information about the MPLS information."
::= { ubiMplsMIBGroups 1 }
END