mibs/MIBS/watchguard/WATCHGUARD-IPSEC-TUNNEL-MIB

553 lines
19 KiB
Plaintext
Raw Permalink Normal View History

2023-12-05 12:25:34 +01:00
WATCHGUARD-IPSEC-TUNNEL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter64,
OBJECT-IDENTITY, enterprises,
IpAddress, TimeTicks FROM SNMPv2-SMI
DateAndTime FROM SNMPv2-TC
watchguard FROM WATCHGUARD-SMI;
wgInfoModule MODULE-IDENTITY
LAST-UPDATED "200701251200Z"
ORGANIZATION "WatchGuard Technologies, Inc."
CONTACT-INFO
" WatchGuard Technologies, Inc.
505 Fifth Avenue South
Suite 500
Seattle, WA 98104
United States
+1.206.613.6600 "
DESCRIPTION
"The MIB module describes various tunnel objects
of WatchGuard system."
REVISION "200701251200Z"
DESCRIPTION
"Initial revision."
::= { watchguard 6 }
wgIpsecTunnelMIB OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all tunnel
branches."
::= { wgInfoModule 5 }
wgIpsecTunnel OBJECT-IDENTITY
STATUS current
DESCRIPTION
"This is the base object identifier for all
tunnel information."
::= { wgIpsecTunnelMIB 1 }
wgIpsecTunnelNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of entries in the wgIpsecTunnelTable. "
::= { wgIpsecTunnel 1 }
wgIpsecTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF WGIpsecTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the connection table describing all current
tunnels exist on this entity."
::= { wgIpsecTunnel 2 }
wgIpsecTunnelEntry OBJECT-TYPE
SYNTAX WGIpsecTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the information on a
tunnel between two security gateways."
INDEX{ wgIpsecTunnelID }
::= { wgIpsecTunnelTable 1 }
WGIpsecTunnelEntry ::= SEQUENCE {
wgIpsecTunnelID Integer32,
wgIpsecTunnelLocalAddr IpAddress,
wgIpsecTunnelPeerAddr IpAddress,
wgIpsecTunnelInSpi Unsigned32,
wgIpsecTunnelOutSpi Unsigned32,
wgIpsecTunnelCreateTime DateAndTime,
wgIpsecTunnelDeviceID Unsigned32,
wgIpsecTunnelEspEncryptAlg INTEGER,
wgIpsecTunnelEspAuthAlg INTEGER,
wgIpsecTunnelAhAuthAlg INTEGER,
wgIpsecTunnelMode INTEGER,
wgIpsecTunnelKeyMode INTEGER,
wgIpsecTunnelLifeTime TimeTicks,
wgIpsecTunnelLifeLength Counter32,
wgIpsecTunnelInSaBytes Counter32,
wgIpsecTunnelOutSaBytes Counter32,
wgIpsecTunnelAccSecs Counter32,
wgIpsecTunnelSelectorProtocol INTEGER,
wgIpsecTunnelSelectorRemoteIPType INTEGER,
wgIpsecTunnelSelectorRemoteIPOne IpAddress,
wgIpsecTunnelSelectorRemoteIPTwo IpAddress,
wgIpsecTunnelSelectorRemotePort INTEGER,
wgIpsecTunnelSelectorLocalIPType INTEGER,
wgIpsecTunnelSelectorLocalIPOne IpAddress,
wgIpsecTunnelSelectorLocalIPTwo IpAddress,
wgIpsecTunnelSelectorLocalPort INTEGER,
wgIpsecTunnelNumRekey Counter32,
wgIpsecTunnelInKbytes Counter32,
wgIpsecTunnelOutKbytes Counter32,
wgIpsecTunnelInPackets Counter32,
wgIpsecTunnelOutPackets Counter32,
wgIpsecTunnelInDecryptErrors Counter32,
wgIpsecTunnelInAuthErrors Counter32,
wgIpsecTunnelInReplayErrors Counter32,
wgIpsecTunnelInOtherErrors Counter32,
wgIpsecTunnelOutDecryptErrors Counter32,
wgIpsecTunnelOutAuthErrors Counter32,
wgIpsecTunnelOutReplayErrors Counter32,
wgIpsecTunnelOutOtherErrors Counter32,
wgIpsecTunnelUdpEncap INTEGER,
wgIpsecTunnelPeerUdpPort INTEGER,
wgIpsecTunnelOrigPeerAddr IpAddress
}
wgIpsecTunnelID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The running index of this tunnel."
::= { wgIpsecTunnelEntry 1 }
wgIpsecTunnelLocalAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local gateway IP address of the current tunnel."
::= { wgIpsecTunnelEntry 2 }
wgIpsecTunnelPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote gateway IP address of the current tunnel."
::= { wgIpsecTunnelEntry 3 }
wgIpsecTunnelInSpi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The security parameters index of inbound SA's within this
tunnel."
::= { wgIpsecTunnelEntry 4 }
wgIpsecTunnelOutSpi OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The security parameters index of outbound SA's within this
tunnel."
::= { wgIpsecTunnelEntry 5 }
wgIpsecTunnelCreateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the tunnel is created."
::= { wgIpsecTunnelEntry 6 }
wgIpsecTunnelDeviceID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of target device where the SA resides."
::= { wgIpsecTunnelEntry 7 }
wgIpsecTunnelEspEncryptAlg OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
des(2),
three-des(3),
aes(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encryption algorithm used in the tunnel. It's 0
if ESP is not used."
::= { wgIpsecTunnelEntry 8 }
wgIpsecTunnelEspAuthAlg OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
md5(2),
sha(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authentication algorithm used in the tunnel. It's
0 if ESP is not used."
::= { wgIpsecTunnelEntry 9 }
wgIpsecTunnelAhAuthAlg OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
md5(2),
sha(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AH authentication algorithm used in the tunnel.
It's 0 if AH is not used."
::= { wgIpsecTunnelEntry 10 }
wgIpsecTunnelMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
tunnel(1),
transport(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The tunnel/transport mode of the tunnel."
::= { wgIpsecTunnelEntry 11 }
wgIpsecTunnelKeyMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
manual(1),
auto-ike(2),
other(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The key mode of the tunnel."
::= { wgIpsecTunnelEntry 12 }
wgIpsecTunnelLifeTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The life time (in hundredths of a second) of the tunnel."
::= { wgIpsecTunnelEntry 13 }
wgIpsecTunnelLifeLength OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum traffic in bytes that the tunnel is allowed to support."
::= { wgIpsecTunnelEntry 14 }
wgIpsecTunnelInSaBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current active inbound SA bytes of the tunnel."
::= { wgIpsecTunnelEntry 15 }
wgIpsecTunnelOutSaBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current active outbound SA bytes of the tunnel."
::= { wgIpsecTunnelEntry 16 }
wgIpsecTunnelAccSecs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds that the tunnel has existed."
::= { wgIpsecTunnelEntry 17 }
wgIpsecTunnelSelectorProtocol OBJECT-TYPE
SYNTAX INTEGER {
any(0),
icmp(1),
igmp(2),
ipip(4),
tcp(6),
egp(8),
pup(12),
udp(17),
idp(22),
tp(29),
ipv6(41),
ipv6-routing(43),
ipv6-fragmentation(44),
rsvp(46),
gre(47),
esp(50),
ah(51),
icmpv6(58),
none(59),
dstopts(60),
mtp(92),
encap(98),
pim(103),
raw(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ip protocol number that this SA(Tunnel) selector carries, or
0 if it carries any protocol."
::= { wgIpsecTunnelEntry 18 }
wgIpsecTunnelSelectorRemoteIPType OBJECT-TYPE
SYNTAX INTEGER {
ip-addr-single(1),
ip-addr-subnet(2),
ip-addr-range(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of remote IP address of the SA(Tunnel) selector in
the entity."
::= { wgIpsecTunnelEntry 19 }
wgIpsecTunnelSelectorRemoteIPOne OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first remote IP address of the SA(Tunnel) selector in the entity.
It's IP address if remote IP of this selector only has one address.
It's IP address of subnet if the remote IP of this selector is IP subnet.
It's the start IP address if the remote IP of this selector
has a range of addresses."
::= { wgIpsecTunnelEntry 20 }
wgIpsecTunnelSelectorRemoteIPTwo OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second remote IP address of the SA(Tunnel) selector in the entity.
It's 0 if remote IP of this selector only has one address.
It's netmask of subnet if the remote IP of this selector is IP subnet.
It's the end IP address if the remote IP of this selector
has a range of addresses."
::= { wgIpsecTunnelEntry 21 }
wgIpsecTunnelSelectorRemotePort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port used by the SA(Tunnel) selector in the entity."
::= { wgIpsecTunnelEntry 22 }
wgIpsecTunnelSelectorLocalIPType OBJECT-TYPE
SYNTAX INTEGER {
ip-addr-single(1),
ip-addr-subnet(2),
ip-addr-range(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of local IP address of the SA(Tunnel) selector in
the entity."
::= { wgIpsecTunnelEntry 23 }
wgIpsecTunnelSelectorLocalIPOne OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The first local IP address of the SA(Tunnel) selector in the entity.
It's IP address if local IP of this selector only has one address.
It's IP address of subnet if the local IP of this selector is IP subnet.
It's the start IP address if the local IP of this selector
has a range of IP addresses."
::= { wgIpsecTunnelEntry 24 }
wgIpsecTunnelSelectorLocalIPTwo OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second local IP address of the SA(Tunnel) selector in the entity.
It's 0 if local IP of this selector only has one address.
It's netmask of subnet if the local IP of this selector is IP subnet.
It's the end IP address if the local IP of this selector
has a range of IP addresses."
::= { wgIpsecTunnelEntry 25 }
wgIpsecTunnelSelectorLocalPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port used by the SA(Tunnel) selector in the entity."
::= { wgIpsecTunnelEntry 26 }
wgIpsecTunnelNumRekey OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rekeys of the tunnel."
::= { wgIpsecTunnelEntry 27 }
wgIpsecTunnelInKbytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Kbytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total inbound traffic in Kbytes since the establish of
this tunnel."
::= { wgIpsecTunnelEntry 28 }
wgIpsecTunnelOutKbytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Kbytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total outound traffic in Kbytes since the establish of
this connection."
::= { wgIpsecTunnelEntry 29 }
wgIpsecTunnelInPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of inbound packets since the establish of
this connection."
::= { wgIpsecTunnelEntry 30 }
wgIpsecTunnelOutPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of outound packets since the establish of
this connection."
::= { wgIpsecTunnelEntry 31 }
wgIpsecTunnelInDecryptErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Deprecated, currently unused."
::= { wgIpsecTunnelEntry 32 }
wgIpsecTunnelInAuthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to authentication
error since the establish of this connection."
::= { wgIpsecTunnelEntry 33 }
wgIpsecTunnelInReplayErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to replay
error since the establish of this connection."
::= { wgIpsecTunnelEntry 34}
wgIpsecTunnelInOtherErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Deprecated, currently unused."
::= { wgIpsecTunnelEntry 35 }
wgIpsecTunnelOutDecryptErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Deprecated, currently unused."
::= { wgIpsecTunnelEntry 36 }
wgIpsecTunnelOutAuthErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to authentication
error since the establish of this connection."
::= { wgIpsecTunnelEntry 37 }
wgIpsecTunnelOutReplayErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of packets discarded due to replay
error since the establish of this connection."
::= { wgIpsecTunnelEntry 38 }
wgIpsecTunnelOutOtherErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Deprecated, currently unused."
::= { wgIpsecTunnelEntry 39 }
wgIpsecTunnelUdpEncap OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Deprecated, currently unused."
::= { wgIpsecTunnelEntry 40 }
wgIpsecTunnelPeerUdpPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Deprecated, currently unused."
::= { wgIpsecTunnelEntry 41 }
wgIpsecTunnelOrigPeerAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Deprecated, currently unused."
::= { wgIpsecTunnelEntry 42 }
END