david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
mibs/MIBS/zte/ZTE-AN-ENVMON-MIB

2440 lines
91 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
ZTE-AN-ENVMON-MIB DEFINITIONS ::= BEGIN
IMPORTS
RowStatus FROM SNMPv2-TC
DisplayString FROM SNMPv2-TC
TruthValue FROM SNMPv2-TC
DateAndTime FROM SNMPv2-TC
MODULE-IDENTITY FROM SNMPv2-SMI
OBJECT-TYPE FROM SNMPv2-SMI
Integer32 FROM SNMPv2-SMI
IpAddress FROM SNMPv2-SMI
Counter64 FROM SNMPv2-SMI
Unsigned32 FROM SNMPv2-SMI
NOTIFICATION-TYPE FROM SNMPv2-SMI
zxAccessNode FROM ZTE-AN-SMI
zxAnEquipment FROM ZTE-AN-SMI
MODULE-COMPLIANCE FROM SNMPv2-CONF
OBJECT-GROUP FROM SNMPv2-CONF
NOTIFICATION-GROUP FROM SNMPv2-CONF
TEXTUAL-CONVENTION FROM SNMPv2-TC
HCPerfCurrentCount FROM HC-PerfHist-TC-MIB;
zxAnEnvMonMib MODULE-IDENTITY
LAST-UPDATED "201412230000Z"
ORGANIZATION "ZTE Corporation"
CONTACT-INFO "Mei YuLing ZTE Corporation
Mail: mei.yuLing@zte.com.cn
Tel : +86-21-68897315"
DESCRIPTION "This MIB defines zte Access Node managed environment
monitor."
REVISION "201412230000Z"
DESCRIPTION
"modify the range of fan tray speed percentage."
REVISION "201312310000Z"
DESCRIPTION
"add fan tray SN configuration."
REVISION "201204270000Z"
DESCRIPTION
"add fan unified configuration."
REVISION "201204180000Z"
DESCRIPTION
"add overheat protection."
REVISION "201110170000Z"
DESCRIPTION
"add details of fan speed level."
REVISION "201105260000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { zxAnEquipment 10 }
ZxAnEnvShutdownServiceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of service type defined in environment monitor module
that may be shut down in protection action,
each bit refers to a type:
Bit 00 : xPON service.
Bit 01 : xDSL service.
Bit 02 : P2P service.
Bit 03 : narrowband service."
SYNTAX BITS {
xpon(0),
xdsl(1),
p2p(2),
narrowband(3)
}
-------------------------------------------------------------------------------
-- Following management objects are defined.
-- 1. Environment Management Capability Table
-- 2. Environment Temperature Table
-- 3. Card Environment Performance Table
--- 3.1. zxAnCardEnvParamTable
--- 3.2. zxAnCardEnvHis15MinPerfTable
--- 3.3. zxAnCardEnvHis1DayPerfTable
--- 3.4. zxAnCardEnvAlmProfileConfTable
--- 3.5. zxAnCardEnvAlmProfileApplyTable
--- 3.6. zxAnCardEnvAlmProfileTable
--- 3.7. zxAnEnvOverheatProtectTable
--- 3.8. zxAnEnvCardOverheatProtectTable
-- 4. Environment Interface Connection Management Table
-- 5. Power Supply Management Table
-- 6. Fan Management Objects
-- 6.1 Fan Tray Control table
-- 6.2 Fans Control And Operational Status table
-- 6.3 Fan Tray Reset Objects
-- 8. Environment Device Objects
-- 9. Environment Device Switch Objects
-- Following notification objects are defined.
-- 21. zxAnEnvMonNotifications
-- Following conformance information is defined.
-- 31. zxAnEnvMonConformance
-------------------------------------------------------------------------------
zxAnEnvMonGlobalObjects OBJECT IDENTIFIER::={zxAnEnvMonMib 1}
zxAnEnvMonObjects OBJECT IDENTIFIER::={zxAnEnvMonMib 2}
zxAnEnvMonNotifications OBJECT IDENTIFIER::={zxAnEnvMonMib 3}
zxAnEnvParamObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 1}
zxAnEnvMonInterfaceObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 2}
zxAnEnvPowerSupplyObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 3}
zxAnEnvFanObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 4}
zxAnEnvDeviceObjects OBJECT IDENTIFIER::={zxAnEnvMonObjects 5}
zxAnEnvFanTrayResetObjects OBJECT IDENTIFIER::={zxAnEnvFanObjects 12}
zxAnEnvParamGlobalObjects OBJECT IDENTIFIER::={zxAnEnvParamObjects 1}
zxAnPowerSupplyGlobalObjects
OBJECT IDENTIFIER ::= { zxAnEnvPowerSupplyObjects 1}
zxAnEnvMonTempTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 1}
zxAnEnvMonInterfaceTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 2}
zxAnEnvMonPowerSupplyTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 3}
zxAnEnvMonFanTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 4}
zxAnEnvDeviceTraps OBJECT IDENTIFIER::={zxAnEnvMonNotifications 5}
-------------------------------------------------------------------------------
-- 1. Environment Management Capability Table
-------------------------------------------------------------------------------
zxAnEnvMonCapabilities OBJECT-TYPE
SYNTAX BITS
{
envTemperature(0),
fanAlarmBeep(1),
fanAutoSwitchByCardInstall(2),
fanSpeedCtrlBasedTemperature(3),
fanFixSpeed(4),
singleFanShutdown(5),
mpTemperature(6),
powerSupply(7),
cardTemperature(8),
fanSpeedPercentage(9),
backplaneInterface(10),
envMonitorInterfaceTrapEnable(11),
slaveShelfFanConfig(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The environment management capabilities of this equipment.The bit
value 1 means the function represented by this bit is supported by
this equipment.
NOTE:
Not recommended to display it in NMS.
"
::= { zxAnEnvMonGlobalObjects 1 }
zxAnEnvCardShutdownReason OBJECT-TYPE
SYNTAX INTEGER
{
envHighTemperature(1),
cardHighTemperature(2),
chipHighTemperature(3),
emergencyPowerSaving(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The alarm reason of zxAnEnvCardShutdownAlm.
envHighTemperature(1): Environment temperature is too high.
cardHighTemperature(2):Card self temperature is too high.
chipHighTemperature(3):Card's chip temperature is too high.
emergencyPowerSaving(4):Emergency power saving action has been
taken caused by AC power failure.
"
::= { zxAnEnvParamGlobalObjects 1 }
-------------------------------------------------------------------------------
-- 2. Environment Temperature Table
-------------------------------------------------------------------------------
zxAnEnvParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnEnvParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes environment temperature information."
::= { zxAnEnvParamObjects 5 }
zxAnEnvParamEntry OBJECT-TYPE
SYNTAX ZxAnEnvParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of zxAnEnvParamTable. "
INDEX { zxAnEnvRack, zxAnEnvShelf }
::= { zxAnEnvParamTable 1 }
ZxAnEnvParamEntry ::= SEQUENCE {
zxAnEnvRack Integer32,
zxAnEnvShelf Integer32,
zxAnEnvTemp Integer32,
zxAnEnvTempHighAlmThreshold Integer32,
zxAnEnvTempCriticalAlmThreshold Integer32,
zxAnEnvTempLowAlmThreshold Integer32,
zxAnEnvShelfPowerConsumption Integer32,
zxAnEnvShelfVoltage Integer32,
zxAnEnvShelfCurrent Integer32
}
zxAnEnvRack OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of rack."
::= { zxAnEnvParamEntry 1 }
zxAnEnvShelf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of shelf."
::= { zxAnEnvParamEntry 2 }
zxAnEnvTemp OBJECT-TYPE
SYNTAX Integer32
UNITS "Centigrade"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature of the environment."
::= { zxAnEnvParamEntry 3 }
zxAnEnvTempHighAlmThreshold OBJECT-TYPE
SYNTAX Integer32(45..95)
UNITS "Centigrade"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The temperature high alarm threshold of the environment."
DEFVAL { 75 }
::= { zxAnEnvParamEntry 4 }
zxAnEnvTempCriticalAlmThreshold OBJECT-TYPE
SYNTAX Integer32
UNITS "Centigrade"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature critical alarm threshold of the environment."
DEFVAL { 100 }
::= { zxAnEnvParamEntry 5 }
zxAnEnvTempLowAlmThreshold OBJECT-TYPE
SYNTAX Integer32(-40..0)
UNITS "Centigrade"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The temperature low alarm threshold of the environment."
::= { zxAnEnvParamEntry 6 }
zxAnEnvShelfPowerConsumption OBJECT-TYPE
SYNTAX Integer32
UNITS "0.001W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power consumption of the shelf.
Value 0 means not available."
::= { zxAnEnvParamEntry 7 }
zxAnEnvShelfVoltage OBJECT-TYPE
SYNTAX Integer32
UNITS "0.001Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Voltage of the shelf.
Value 0 means not available."
::= { zxAnEnvParamEntry 8 }
zxAnEnvShelfCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS "0.001Amp"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current of the shelf.
Value 0 means not available."
::= { zxAnEnvParamEntry 9 }
-------------------------------------------------------------------------------
-- 3. Card Environment Performance Table
-- 3.1. zxAnCardEnvParamTable
-------------------------------------------------------------------------------
zxAnCardEnvParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnCardEnvParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes card temperature information."
::= { zxAnEnvParamObjects 6 }
zxAnCardEnvParamEntry OBJECT-TYPE
SYNTAX ZxAnCardEnvParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of zxAnCardEnvParamTable. "
INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot }
::= { zxAnCardEnvParamTable 1 }
ZxAnCardEnvParamEntry ::= SEQUENCE {
zxAnEnvSlot Integer32,
zxAnCardTemp Integer32,
zxAnCardPowerConsumption Integer32,
zxAnCardVoltage Integer32,
zxAnCardCurrent Integer32,
zxAnCardCriticalTempAlmThreshold Integer32,
zxAnCardOptHighestTemp Integer32,
zxAnCardOptCriticalTempAlmThresh Integer32,
zxAnCardOptHighestTempPortNo Integer32,
zxAnCardHeatRadiationAlmThresh Integer32
}
zxAnEnvSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of slot, the range is [0,20] of 19-inch
shelf and [0,22] of 21-inch shelf."
::= { zxAnCardEnvParamEntry 1 }
zxAnCardTemp OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current temperature of the card environment.
NOTE:
1. In current system, only certain cards support
temperature-reading, such as SCXL, GTGOD cards.
2. If the card is not configured, we cannot get its
temperature.
3. For the configured but not support temperature-reading
cards, we use -1000 as an invalid temperature value to note
its temperature.
"
::= { zxAnCardEnvParamEntry 2 }
zxAnCardPowerConsumption OBJECT-TYPE
SYNTAX Integer32
UNITS "0.001W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power consumption of the card.
Value 0 means not available."
::= { zxAnCardEnvParamEntry 3 }
zxAnCardVoltage OBJECT-TYPE
SYNTAX Integer32
UNITS "0.001Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Voltage of the card.
Value 0 means not available."
::= { zxAnCardEnvParamEntry 4 }
zxAnCardCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS "0.001Amp"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current of the card.
Value 0 means not available."
::= { zxAnCardEnvParamEntry 5 }
zxAnCardCriticalTempAlmThreshold OBJECT-TYPE
SYNTAX Integer32
UNITS "Centigrade"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The critical temperature alarm threshold of the card."
::= { zxAnCardEnvParamEntry 6 }
zxAnCardOptHighestTemp OBJECT-TYPE
SYNTAX Integer32
UNITS "0.001Degrees"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The highest temperature of the optical modules in the card."
::= { zxAnCardEnvParamEntry 7 }
zxAnCardOptCriticalTempAlmThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Centigrade"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The critical optical temperature alarm threshold."
::= { zxAnCardEnvParamEntry 8 }
zxAnCardOptHighestTempPortNo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The port No. which the optical module is located at, and the
optical module has the highest temperature."
::= { zxAnCardEnvParamEntry 9 }
zxAnCardHeatRadiationAlmThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Centigrade"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The heat radiation abnormal alarm threshold of the card."
::= { zxAnCardEnvParamEntry 10 }
-------------------------------------------------------------------------------
-- 3.2. zxAnCardEnvHis15MinPerfTable
-------------------------------------------------------------------------------
zxAnCardEnvHis15MinPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnCardEnvHis15MinPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 15 minutes interval performance data table of card
temperature."
::= { zxAnEnvParamObjects 7 }
zxAnCardEnvHis15MinPerfEntry OBJECT-TYPE
SYNTAX ZxAnCardEnvHis15MinPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 15 minutes interval performance data entry of card
temperature."
INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot,
zxAnCardEnvHis15MinIntervalNo }
::= { zxAnCardEnvHis15MinPerfTable 1 }
ZxAnCardEnvHis15MinPerfEntry ::= SEQUENCE {
zxAnCardEnvHis15MinIntervalNo Integer32,
zxAnCardEnvHis15MinDateTime DateAndTime,
zxAnCardEnvHis15MinTemp Counter64
}
zxAnCardEnvHis15MinIntervalNo OBJECT-TYPE
SYNTAX Integer32(1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance data interval number 1 is the the most recent
previous interval; interval 96 is 24 hours ago.
Intervals 2..96 are optional."
::= { zxAnCardEnvHis15MinPerfEntry 1 }
zxAnCardEnvHis15MinDateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 15 minutes interval performance data generation time."
::= { zxAnCardEnvHis15MinPerfEntry 2 }
zxAnCardEnvHis15MinTemp OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 15 minutes interval average temperature of card."
::= { zxAnCardEnvHis15MinPerfEntry 3 }
-------------------------------------------------------------------------------
-- 3.3. zxAnCardEnvHis1DayPerfTable
-------------------------------------------------------------------------------
zxAnCardEnvHis1DayPerfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnCardEnvHis1DayPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 1 day interval performance data table of card temperature."
::= { zxAnEnvParamObjects 8 }
zxAnCardEnvHis1DayPerfEntry OBJECT-TYPE
SYNTAX ZxAnCardEnvHis1DayPerfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 1 day interval performance data entry of card temperature."
INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot,
zxAnCardEnvHis1DayIntervalNo }
::= { zxAnCardEnvHis1DayPerfTable 1 }
ZxAnCardEnvHis1DayPerfEntry ::= SEQUENCE {
zxAnCardEnvHis1DayIntervalNo Integer32,
zxAnCardEnvHis1DayDateTime DateAndTime,
zxAnCardEnvHis1DayTemp Counter64
}
zxAnCardEnvHis1DayIntervalNo OBJECT-TYPE
SYNTAX Integer32(1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance data interval number 1 is the the most recent
previous interval; interval 7 is 1 week ago.
Intervals 2..7 are optional."
::= { zxAnCardEnvHis1DayPerfEntry 1 }
zxAnCardEnvHis1DayDateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1 day interval performance data generation time."
::= { zxAnCardEnvHis1DayPerfEntry 2 }
zxAnCardEnvHis1DayTemp OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 1 day interval average temperature of card."
::= { zxAnCardEnvHis1DayPerfEntry 3 }
-------------------------------------------------------------------------------
-- 3.4. zxAnCardEnvAlmProfileConfTable
-------------------------------------------------------------------------------
zxAnCardEnvAlmProfileConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnCardEnvAlmProfileConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The performance alarm threshold profile items configuration table
of card temperature."
::= { zxAnEnvParamObjects 9 }
zxAnCardEnvAlmProfileConfEntry OBJECT-TYPE
SYNTAX ZxAnCardEnvAlmProfileConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The performance alarm threshold profile items configuration entry
of card temperature."
INDEX { zxAnCardEnvAlmProfileName, zxAnCardEnvPerfVariable }
::= { zxAnCardEnvAlmProfileConfTable 1 }
ZxAnCardEnvAlmProfileConfEntry ::= SEQUENCE {
zxAnCardEnvAlmProfileName DisplayString,
zxAnCardEnvPerfVariable OBJECT IDENTIFIER,
zxAnCardEnvRiseAlmThresh HCPerfCurrentCount,
zxAnCardEnvClrRiseAlmThresh HCPerfCurrentCount,
zxAnCardEnvRiseWarnThresh HCPerfCurrentCount,
zxAnCardEnvClrRiseWarnThresh HCPerfCurrentCount,
zxAnCardEnvFallWarnThresh HCPerfCurrentCount,
zxAnCardEnvClrFallWarnThresh HCPerfCurrentCount,
zxAnCardEnvFallAlmThresh HCPerfCurrentCount,
zxAnCardEnvClrFallAlmThresh HCPerfCurrentCount,
zxAnCardEnvAlmPrfConfRowStatus RowStatus
}
zxAnCardEnvAlmProfileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The performance alarm threshold profile name."
::= { zxAnCardEnvAlmProfileConfEntry 1 }
zxAnCardEnvPerfVariable OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object identifier of performance variables."
::= { zxAnCardEnvAlmProfileConfEntry 2 }
zxAnCardEnvRiseAlmThresh OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The threshold for rising alarm."
::= { zxAnCardEnvAlmProfileConfEntry 3 }
zxAnCardEnvClrRiseAlmThresh OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The threshold for rising alarm restore."
::= { zxAnCardEnvAlmProfileConfEntry 4 }
zxAnCardEnvRiseWarnThresh OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The threshold for rising warning."
::= { zxAnCardEnvAlmProfileConfEntry 5 }
zxAnCardEnvClrRiseWarnThresh OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The threshold for rising warning restore."
::= { zxAnCardEnvAlmProfileConfEntry 6 }
zxAnCardEnvFallWarnThresh OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The threshold for falling warning."
::= { zxAnCardEnvAlmProfileConfEntry 7 }
zxAnCardEnvClrFallWarnThresh OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The threshold for falling warning restore."
::= { zxAnCardEnvAlmProfileConfEntry 8 }
zxAnCardEnvFallAlmThresh OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The threshold for falling alarm."
::= { zxAnCardEnvAlmProfileConfEntry 9 }
zxAnCardEnvClrFallAlmThresh OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The threshold for falling alarm restore."
::= { zxAnCardEnvAlmProfileConfEntry 10 }
zxAnCardEnvAlmPrfConfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to createAndGo(4).
To delete a row in this table, a manager must
set this object to destroy(6). "
::= { zxAnCardEnvAlmProfileConfEntry 50 }
-------------------------------------------------------------------------------
-- 3.5. zxAnCardEnvAlmProfileApplyTable
-------------------------------------------------------------------------------
zxAnCardEnvAlmProfileApplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnCardEnvAlmProfileApplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The performance alarm threshold profile application table of
card temperature."
::= { zxAnEnvParamObjects 10 }
zxAnCardEnvAlmProfileApplyEntry OBJECT-TYPE
SYNTAX ZxAnCardEnvAlmProfileApplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The performance alarm threshold profile application entry of
card temperature."
INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot }
::= { zxAnCardEnvAlmProfileApplyTable 1 }
ZxAnCardEnvAlmProfileApplyEntry ::= SEQUENCE {
zxAnCardEnvAlmPrf DisplayString,
zxAnCardEnvAlmPrfApplyRowStatus RowStatus
}
zxAnCardEnvAlmPrf OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The performance alarm threshold profile."
::= { zxAnCardEnvAlmProfileApplyEntry 1 }
zxAnCardEnvAlmPrfApplyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to createAndGo(4).
To delete a row in this table, a manager must
set this object to destroy(6). "
::= { zxAnCardEnvAlmProfileApplyEntry 50 }
-------------------------------------------------------------------------------
-- 3.6. zxAnCardEnvAlmProfileTable
-------------------------------------------------------------------------------
zxAnCardEnvAlmProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnCardEnvAlmProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The performance alarm threshold profile table of card
temperature."
::= { zxAnEnvParamObjects 11 }
zxAnCardEnvAlmProfileEntry OBJECT-TYPE
SYNTAX ZxAnCardEnvAlmProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The performance alarm threshold profile entry of
card temperature."
INDEX { zxAnCardEnvAlmProfileName }
::= { zxAnCardEnvAlmProfileTable 1 }
ZxAnCardEnvAlmProfileEntry ::= SEQUENCE {
zxAnCardEnvAlmPrfRowStatus RowStatus
}
zxAnCardEnvAlmPrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create a row in this table, a manager must
set this object to createAndGo(4).
To delete a row in this table, a manager must
set this object to destroy(6). "
::= { zxAnCardEnvAlmProfileEntry 50 }
-------------------------------------------------------------------------------
--- 3.7. zxAnEnvOverheatProtectTable
-------------------------------------------------------------------------------
zxAnEnvOverheatProtectTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnEnvOverheatProtectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Environment overheat protection table."
::= { zxAnEnvParamObjects 13 }
zxAnEnvOverheatProtectEntry OBJECT-TYPE
SYNTAX ZxAnEnvOverheatProtectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Environment overheat protection entry.
To modify zxAnEnvOverheatProtectEnable from disabled to enabled,
zxAnEnvOverheatProtectEnable is mandatory,
zxAnEnvOverheatProtectDelay is optional.
To modify zxAnEnvOverheatProtectEnable from enabled to disabled,
only zxAnEnvOverheatProtectEnable is mandatory."
INDEX { zxAnEnvRack, zxAnEnvShelf }
::= { zxAnEnvOverheatProtectTable 1 }
ZxAnEnvOverheatProtectEntry ::= SEQUENCE {
zxAnEnvOverheatProtectEnable INTEGER,
zxAnEnvOverheatProtectDelay Integer32,
zxAnEnvOverheatProtectFirstStep ZxAnEnvShutdownServiceType,
zxAnEnvOverheatProtectSecondStep ZxAnEnvShutdownServiceType
}
zxAnEnvOverheatProtectEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables the environment overheat protection function."
DEFVAL { disabled }
::= { zxAnEnvOverheatProtectEntry 1 }
zxAnEnvOverheatProtectDelay OBJECT-TYPE
SYNTAX Integer32(1..60)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The delaying time between two steps.
For example, when temperature is higher than the threshold, takes an
action as the step 1, and delays the value of
zxAnEnvOverheatProtectDelay, if the temperature is still higher than
the threshold, takes an action as step 2."
DEFVAL { 10 }
::= { zxAnEnvOverheatProtectEntry 2 }
zxAnEnvOverheatProtectFirstStep OBJECT-TYPE
SYNTAX ZxAnEnvShutdownServiceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The first step when the environment temperature exceeds
zxAnEnvTempHighAlmThreshold."
DEFVAL { {xpon,xdsl,p2p} }
::= { zxAnEnvOverheatProtectEntry 3 }
zxAnEnvOverheatProtectSecondStep OBJECT-TYPE
SYNTAX ZxAnEnvShutdownServiceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The second step when the environment temperature still exceeds
zxAnEnvTempHighAlmThreshold after first step has been done."
DEFVAL { {narrowband} }
::= { zxAnEnvOverheatProtectEntry 4 }
-------------------------------------------------------------------------------
--- 3.8. zxAnEnvCardOverheatProtectTable
-------------------------------------------------------------------------------
zxAnEnvCardOverheatProtectTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnEnvCardOverheatProtectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Card overheat protection table."
::= { zxAnEnvParamObjects 14 }
zxAnEnvCardOverheatProtectEntry OBJECT-TYPE
SYNTAX ZxAnEnvCardOverheatProtectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Card overheat protection entry."
INDEX { zxAnEnvRack, zxAnEnvShelf }
::= { zxAnEnvCardOverheatProtectTable 1 }
ZxAnEnvCardOverheatProtectEntry ::= SEQUENCE {
zxAnEnvCardCriticalTempProtectEn INTEGER
}
zxAnEnvCardCriticalTempProtectEn OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables the card critical temperature protection
function. If it is enabled, the card will be stopped when the card
temperature is higher than the card critical temperature."
DEFVAL { enabled }
::= { zxAnEnvCardOverheatProtectEntry 1 }
-------------------------------------------------------------------------------
-- 4. Environment Interface Connection Management Table
-------------------------------------------------------------------------------
zxAnEnvMonInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnEnvMonInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes the environment interface information."
::= { zxAnEnvMonInterfaceObjects 5 }
zxAnEnvMonInterfaceEntry OBJECT-TYPE
SYNTAX ZxAnEnvMonInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of zxAnEnvMonInterfaceTable. "
INDEX { zxAnEnvRack, zxAnEnvShelf }
::= { zxAnEnvMonInterfaceTable 1 }
ZxAnEnvMonInterfaceEntry ::= SEQUENCE {
zxAnEnvMonInterfaceUsage INTEGER,
zxAnEnvEpmConnectPort INTEGER,
zxAnEnvBackplaneInterfaceUsage INTEGER
}
zxAnEnvMonInterfaceUsage OBJECT-TYPE
SYNTAX INTEGER
{
epm(1),
fanTray(2),
noUse(3),
noSupport(4),
etmWithTestSubcard(5),
etmWithoutTestSubcard(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The equipment type connected to the environment monitor interface.
"
DEFVAL { fanTray }
::= { zxAnEnvMonInterfaceEntry 1 }
zxAnEnvEpmConnectPort OBJECT-TYPE
SYNTAX INTEGER
{
port0(1),
port1(2),
notconfigured(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port no which epm connect"
::= { zxAnEnvMonInterfaceEntry 2 }
zxAnEnvBackplaneInterfaceUsage OBJECT-TYPE
SYNTAX INTEGER
{
fan(1),
noUse(3),
noSupport(255)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The equipment type connected to the Backplane Interface.
fan(1): the fan connect to the Backplane Interface;
noUse(3): not used;
noSupport(255):not support.
"
::= { zxAnEnvMonInterfaceEntry 3 }
-------------------------------------------------------------------------------
-- 5. Power Supply Management Table
-------------------------------------------------------------------------------
zxAnEnvEmergencyPowerSaveEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables the emergency power saving."
DEFVAL { disabled }
::= { zxAnPowerSupplyGlobalObjects 1 }
zxAnEnvEmergencyPowerSaveDelay OBJECT-TYPE
SYNTAX Integer32(0..1440)
UNITS "Minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If AC power failure lasts more than zxAnEnvEmergencyPowerSaveDelay,
emergency power saving action will be taken."
DEFVAL { 60 }
::= { zxAnPowerSupplyGlobalObjects 2 }
zxAnEnvEmergencyPowerSaveRecover OBJECT-TYPE
SYNTAX Integer32(0..1440)
UNITS "Minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If AC power recovered, after this delay, the emergency power save
action will be cancelled."
DEFVAL { 0 }
::= { zxAnPowerSupplyGlobalObjects 3 }
zxAnEnvEmergencyPowerSaveSvcType OBJECT-TYPE
SYNTAX ZxAnEnvShutdownServiceType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The service types will be shut down in emergency power saving
action."
DEFVAL { {xpon, xdsl, p2p} }
::= { zxAnPowerSupplyGlobalObjects 4 }
zxAnEnvPowerMode OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
battery(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current power supply mode of the equipment, emergency power
saving action is on the basis of the power mode zxAnEnvPowerMode.
normal(1) means using AC power as power supply.
battery(2) means using storage battery as power supply.
"
DEFVAL { normal }
::= { zxAnPowerSupplyGlobalObjects 5 }
zxAnEnvEmergencyBatteryVoltage OBJECT-TYPE
SYNTAX Integer32
UNITS "0.001Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current voltage of the battery."
::= { zxAnPowerSupplyGlobalObjects 6 }
zxAnEnvEmergencyBatteryThreshold OBJECT-TYPE
SYNTAX Integer32(45000..53000)
UNITS "0.001Volts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold of the battery voltage.
If the battery voltage is less than
zxAnEnvEmergencyBatteryThreshold, the emergency power saving action
will be taken."
DEFVAL { 48000 }
::= { zxAnPowerSupplyGlobalObjects 7 }
zxAnPowerSupplyCapabilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnPowerSupplyCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes power supply capability table."
::= { zxAnEnvPowerSupplyObjects 10 }
zxAnPowerSupplyCapabilityEntry OBJECT-TYPE
SYNTAX ZxAnPowerSupplyCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of zxAnPowerSupplyCapabilityTable."
INDEX { zxAnEnvRack, zxAnEnvShelf }
::= { zxAnPowerSupplyCapabilityTable 1 }
ZxAnPowerSupplyCapabilityEntry ::= SEQUENCE
{
zxAnPowerSupplyMaxPowerNum Integer32
}
zxAnPowerSupplyMaxPowerNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The max number of power supply in the equipment."
::= { zxAnPowerSupplyCapabilityEntry 1 }
--- Power supply table
zxAnPowerSupplyTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnPowerSupplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes power supply table."
::= { zxAnEnvPowerSupplyObjects 11 }
zxAnPowerSupplyEntry OBJECT-TYPE
SYNTAX ZxAnPowerSupplyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in zxAnPowerSupplyTable."
INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvSlot }
::= { zxAnPowerSupplyTable 1 }
ZxAnPowerSupplyEntry ::= SEQUENCE
{
zxAnPowerSupplyOperStatus INTEGER,
zxAnPowerSupplyInVoltage Integer32,
zxAnPowerSupplyInVoltageStatus INTEGER,
zxAnPowerInVoltageUpperThresh Integer32,
zxAnPowerInVoltageLowerThresh Integer32,
zxAnPowerSupplyInCurrent Integer32,
zxAnPowerInCurrentThresh Integer32
}
zxAnPowerSupplyOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
inService(1),
hwOffline(2),
powerFaulty(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the power supply module."
::= { zxAnPowerSupplyEntry 1 }
zxAnPowerSupplyInVoltage OBJECT-TYPE
SYNTAX Integer32
UNITS "Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual input volts of the power supply module."
::= { zxAnPowerSupplyEntry 2 }
zxAnPowerSupplyInVoltageStatus OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
overVoltage(2),
underVoltage(3),
off(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The volt status of the power supply.
normal(1) -- The input power is normal.
overVoltage(2) -- The input power is over voltage.
underVoltage(3) -- The input power is under voltage.
off(4)) -- No power input.
"
::= { zxAnPowerSupplyEntry 3 }
zxAnPowerInVoltageUpperThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Volts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper threshold of input volts.The alarm should be generated
when zxAnPowerSupplyInVoltage exceeds this threshold.
If it is 0, no alarm reported to manager."
DEFVAL { 0 }
::= { zxAnPowerSupplyEntry 4 }
zxAnPowerInVoltageLowerThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Volts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lower threshold of input volts.The alarm should be generated
when zxAnPowerSupplyInVoltage is lower than this threshold.
If it is 0, no alarm reported to manager."
DEFVAL { 0 }
::= { zxAnPowerSupplyEntry 5 }
zxAnPowerSupplyInCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS "Amp"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual current of the power supply module."
::= { zxAnPowerSupplyEntry 6 }
zxAnPowerInCurrentThresh OBJECT-TYPE
SYNTAX Integer32
UNITS "Amp"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The upper threshold of input current.The alarm should be generated
when zxAnPowerSupplyInCurrent exceeds this threshold.
If it is 0, no alarm reported to manager."
DEFVAL { 0 }
::= { zxAnPowerSupplyEntry 7 }
-------------------------------------------------------------------------------
-- 6. Fan Management Objects
-- 6.1 Fan Tray Control table
-------------------------------------------------------------------------------
zxAnEnvFanTrayTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnEnvFanTrayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Fan Tray Control table, with rack and shelf information."
::= { zxAnEnvFanObjects 10 }
zxAnEnvFanTrayEntry OBJECT-TYPE
SYNTAX ZxAnEnvFanTrayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the zxAnEnvFanTrayTable."
INDEX { zxAnEnvRack, zxAnEnvShelf }
::= { zxAnEnvFanTrayTable 1 }
ZxAnEnvFanTrayEntry ::= SEQUENCE
{ zxAnFanTrayAlarmBeepEnable INTEGER,
zxAnFanTrayAutoSwitchByCardUp INTEGER,
zxAnFanTrayHardwareVersion DisplayString,
zxAnFanTraySoftwareVersion DisplayString,
zxAnFanTraySpeedCtrlMode INTEGER,
zxAnFanTrayLowSpeed Integer32,
zxAnFanTrayStdSpeed Integer32,
zxAnFanTrayHighSpeed Integer32,
zxAnFanTraySuperSpeed Integer32,
zxAnFanTrayLowSpeedShiftTemp Integer32,
zxAnFanTrayStdSpeedShiftTemp Integer32,
zxAnFanTrayHighSpeedShiftTemp Integer32,
zxAnFanTraySuperSpeedShiftTemp Integer32,
zxAnFanTrayLowSpeedPercent INTEGER,
zxAnFanTrayStdSpeedPercent INTEGER,
zxAnFanTrayHighSpeedPercent INTEGER,
zxAnFanTraySuperSpeedPercent INTEGER,
zxAnFanTrayAdminStatus INTEGER,
zxAnFanTrayConfSpeedLevel INTEGER,
zxAnFanTrayPowerConsumption Integer32,
zxAnFanTraySn DisplayString,
zxAnFanTrayVoltage Integer32,
zxAnFanTrayCurrent Integer32,
zxAnFanTrayTemp Integer32
}
zxAnFanTrayAlarmBeepEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control status of the fan alarm beep."
DEFVAL { enable }
::= { zxAnEnvFanTrayEntry 1 }
zxAnFanTrayAutoSwitchByCardUp OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable fan auto switch with card installation. If it is
enabled, the fan under the card should be switched to running
status when the card is installed. Otherwise, the fan should be
shutdown.
"
DEFVAL { disable }
::= { zxAnEnvFanTrayEntry 2 }
zxAnFanTrayHardwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The hardware version of the fan tray"
::= { zxAnEnvFanTrayEntry 3 }
zxAnFanTraySoftwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The software version of the fan tray"
::= { zxAnEnvFanTrayEntry 4 }
zxAnFanTraySpeedCtrlMode OBJECT-TYPE
SYNTAX INTEGER
{
temperatureBasedAutoCtrl(1),
fixSpeed(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The speed control mode of the fan.
When this value is fixSpeed,zxAnFanTrayAdminStatus,
zxAnFanTrayConfSpeedLevel,zxAnEnvFanAdminStatus and
zxAnEnvFanConfSpeedLevel can be configured."
DEFVAL { temperatureBasedAutoCtrl }
::= { zxAnEnvFanTrayEntry 5 }
zxAnFanTrayLowSpeed OBJECT-TYPE
SYNTAX Integer32
UNITS "RPM"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The speed value of the fan's low speed level.
The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700,
4000,4400.
NOTE:
Different equipment maybe has different default value.
"
::= { zxAnEnvFanTrayEntry 6 }
zxAnFanTrayStdSpeed OBJECT-TYPE
SYNTAX Integer32
UNITS "RPM"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The speed value of the fan's standard speed level.
The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700,
4000,4400.
NOTE:
Different equipment maybe has different default value.
"
::= { zxAnEnvFanTrayEntry 7 }
zxAnFanTrayHighSpeed OBJECT-TYPE
SYNTAX Integer32
UNITS "RPM"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The speed value of the fan's high speed level.
The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700,
4000,4400.
NOTE:
Different equipment maybe has different default value.
"
::= { zxAnEnvFanTrayEntry 8 }
zxAnFanTraySuperSpeed OBJECT-TYPE
SYNTAX Integer32
UNITS "RPM"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The speed value of the fan's super speed level.
The values for ZXDSL9800,9210 are 1500,2400,2700,3000,3400,3700,
4000,4400.
NOTE:
Different equipment maybe has different default value.
"
::= { zxAnEnvFanTrayEntry 9 }
zxAnFanTrayLowSpeedShiftTemp OBJECT-TYPE
SYNTAX Integer32(0..55)
UNITS "centigrade"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The temperature to activate the fan tray to shift to
the low speed level.
"
::= { zxAnEnvFanTrayEntry 10 }
zxAnFanTrayStdSpeedShiftTemp OBJECT-TYPE
SYNTAX Integer32(5..60)
UNITS "centigrade"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The temperature to activate the fan tray to shift to
the standard speed level.
"
::= { zxAnEnvFanTrayEntry 11 }
zxAnFanTrayHighSpeedShiftTemp OBJECT-TYPE
SYNTAX Integer32(10..65)
UNITS "centigrade"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The temperature to activate the fan tray to shift to
the high speed level.
"
::= { zxAnEnvFanTrayEntry 12 }
zxAnFanTraySuperSpeedShiftTemp OBJECT-TYPE
SYNTAX Integer32(15..70)
UNITS "centigrade"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The temperature to activate the fan tray to shift to
the super speed level.
"
::= { zxAnEnvFanTrayEntry 13 }
zxAnFanTrayLowSpeedPercent OBJECT-TYPE
SYNTAX INTEGER(10..97)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The percentage of speed of the low speed level."
DEFVAL{30}
::= { zxAnEnvFanTrayEntry 14 }
zxAnFanTrayStdSpeedPercent OBJECT-TYPE
SYNTAX INTEGER(11..98)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The percentage of speed of the standard speed level."
DEFVAL{50}
::= { zxAnEnvFanTrayEntry 15 }
zxAnFanTrayHighSpeedPercent OBJECT-TYPE
SYNTAX INTEGER(12..99)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The percentage of speed of the high speed level."
DEFVAL{70}
::= { zxAnEnvFanTrayEntry 16 }
zxAnFanTraySuperSpeedPercent OBJECT-TYPE
SYNTAX INTEGER(13..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The percentage of speed of the super speed level."
DEFVAL{90}
::= { zxAnEnvFanTrayEntry 17 }
zxAnFanTrayAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The administrative status of the fan tray.
When zxAnFanTrayAdminStatus is configured, all the
zxAnEnvFanAdminStatus values are consistent with
zxAnFanTrayAdminStatus."
DEFVAL { up }
::= { zxAnEnvFanTrayEntry 18 }
zxAnFanTrayConfSpeedLevel OBJECT-TYPE
SYNTAX INTEGER
{
lowSpeed (1),
standardSpeed(2),
highSpeed (3),
superSpeed (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The configured speed level of the fan tray.
When zxAnFanTrayConfSpeedLevel is configured, all the
zxAnEnvFanConfSpeedLevel values are consistent with
zxAnFanTrayConfSpeedLevel.
This variable is valid if zxAnFanTrayAdminStatus is up."
DEFVAL { standardSpeed }
::= { zxAnEnvFanTrayEntry 19 }
zxAnFanTrayPowerConsumption OBJECT-TYPE
SYNTAX Integer32
UNITS "0.001W"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power consumption of the fan tray.
Value 0 means not available."
::= { zxAnEnvFanTrayEntry 20 }
zxAnFanTraySn OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..12))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The serial number of fan tray."
DEFVAL { "" }
::= { zxAnEnvFanTrayEntry 21 }
zxAnFanTrayVoltage OBJECT-TYPE
SYNTAX Integer32
UNITS "0.001Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Voltage of the fan tray.
Value 0 means not available."
::= { zxAnEnvFanTrayEntry 22 }
zxAnFanTrayCurrent OBJECT-TYPE
SYNTAX Integer32
UNITS "0.001Amp"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current of the fan tray.
Value 0 means not available."
::= { zxAnEnvFanTrayEntry 23 }
zxAnFanTrayTemp OBJECT-TYPE
SYNTAX Integer32
UNITS "Centigrade"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The temperature of the fan tray."
::= { zxAnEnvFanTrayEntry 24 }
-------------------------------------------------------------------------------
-- 6.2 Fans Control And Operational Status table
-------------------------------------------------------------------------------
zxAnEnvFanTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnEnvFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes speed information and operational status of
the fan units."
::= { zxAnEnvFanObjects 11 }
zxAnEnvFanEntry OBJECT-TYPE
SYNTAX ZxAnEnvFanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of zxAnEnvFanTable. "
INDEX { zxAnEnvRack, zxAnEnvShelf, zxAnEnvFanIndex }
::= { zxAnEnvFanTable 1 }
ZxAnEnvFanEntry ::= SEQUENCE {
zxAnEnvFanIndex Integer32,
zxAnEnvFanConfSpeedLevel INTEGER,
zxAnEnvFanActualSpeedLevel INTEGER,
zxAnEnvFanAdminStatus INTEGER,
zxAnEnvFanOperStatus INTEGER,
zxAnEnvFanOnlineStatus INTEGER,
zxAnEnvFanActualSpeed Integer32
}
zxAnEnvFanIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this fan unit.
For 19-inch shelf, there are 3 fans in each fan tray.
The fan index should be integer in [1,3].
For 21-inch shelf, there are 4 fans. The fan index should
be integer in [1,4]."
::= { zxAnEnvFanEntry 1 }
zxAnEnvFanConfSpeedLevel OBJECT-TYPE
SYNTAX INTEGER
{
lowSpeed (1),
standardSpeed(2),
highSpeed (3),
superSpeed (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured speed level of the fan unit singly."
DEFVAL { standardSpeed }
::= { zxAnEnvFanEntry 2 }
zxAnEnvFanActualSpeedLevel OBJECT-TYPE
SYNTAX INTEGER
{
lowSpeed (1),
standardSpeed(2),
highSpeed (3),
superSpeed (4),
other (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The actual speed level of the fan unit."
::= { zxAnEnvFanEntry 3 }
zxAnEnvFanAdminStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative status of the fan unit singly."
DEFVAL { up }
::= { zxAnEnvFanEntry 4 }
zxAnEnvFanOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational status of the fan unit."
::= { zxAnEnvFanEntry 5 }
zxAnEnvFanOnlineStatus OBJECT-TYPE
SYNTAX INTEGER
{
online(1),
offline(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The actual online status of the fan unit."
::= { zxAnEnvFanEntry 6 }
zxAnEnvFanActualSpeed OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The actual speed of the fan unit.
NOTE:
If not supported, NMS should use the speed value of
zxAnEnvFanActualSpeedLevel."
::= { zxAnEnvFanEntry 7 }
-------------------------------------------------------------------------------
-- 6.3 Fan Tray Reset Objects
-------------------------------------------------------------------------------
zxAnEnvFanTrayResetRack OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rack number of the fan tray."
::= { zxAnEnvFanTrayResetObjects 1 }
zxAnEnvFanTrayResetShelfList OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 16 ) )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The shelf number list of the fan tray.
They can be reset in batch, for example: 1,2,3.
Setting this object to empty means all the fan trays
connected with zxAnEnvFanTrayRack will be reset."
::= { zxAnEnvFanTrayResetObjects 2 }
zxAnEnvFanTrayResetAction OBJECT-TYPE
SYNTAX INTEGER
{
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the fan trays.
To query this object, always return 1."
::= { zxAnEnvFanTrayResetObjects 3 }
-------------------------------------------------------------------------------
-- 8. Environment Device Objects
-------------------------------------------------------------------------------
zxAnEnvDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnEnvDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of environment device."
::= { zxAnEnvDeviceObjects 2 }
zxAnEnvDeviceEntry OBJECT-TYPE
SYNTAX ZxAnEnvDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the zxAnEnvDeviceTable."
INDEX { zxAnEnvDeviceId }
::= { zxAnEnvDeviceTable 1 }
ZxAnEnvDeviceEntry ::= SEQUENCE {
zxAnEnvDeviceId Integer32,
zxAnEnvDeviceName DisplayString,
zxAnEnvDeviceRowStatus RowStatus
}
zxAnEnvDeviceId OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of this environment device.
Value 1-50 is default value which can not be modified or deleted.
If add a new device, the ID will be starting from 51."
::= { zxAnEnvDeviceEntry 1 }
zxAnEnvDeviceName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the environment device."
::= { zxAnEnvDeviceEntry 2 }
zxAnEnvDeviceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
The supported actions of this conceptual row only include:
'createAndGo' and 'destroy'.
To create a row in this table, a manager must set this object to
createAndGo(4).
To delete a row in this table, a manager must set this object to
destroy(6).
To get this object, the agent always returns active(1).
"
::= { zxAnEnvDeviceEntry 50 }
-------------------------------------------------------------------------------
-- 9. Environment Device Switch Objects
-------------------------------------------------------------------------------
zxAnEnvDevMonSwitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnEnvDevMonSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table of the switch which monitors environment device."
::= { zxAnEnvDeviceObjects 3 }
zxAnEnvDevMonSwitchEntry OBJECT-TYPE
SYNTAX ZxAnEnvDevMonSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of the zxAnEnvDevMonSwitchTable."
INDEX { zxAnEnvDevMonSwitchId }
::= { zxAnEnvDevMonSwitchTable 1 }
ZxAnEnvDevMonSwitchEntry ::= SEQUENCE {
zxAnEnvDevMonSwitchId Integer32,
zxAnEnvDevMonSwitchDeviceId Integer32,
zxAnEnvDevMonSwitchTrapEnable INTEGER,
zxAnEnvDevMonSwitchNormalStatus INTEGER,
zxAnEnvDevMonSwitchCurrStatus INTEGER
}
zxAnEnvDevMonSwitchId OBJECT-TYPE
SYNTAX Integer32(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of the switch."
::= { zxAnEnvDevMonSwitchEntry 1 }
zxAnEnvDevMonSwitchDeviceId OBJECT-TYPE
SYNTAX Integer32(0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ID of the device which monitored by the switch.
Value 0 means this switch does not monitor any device."
DEFVAL { 0 }
::= { zxAnEnvDevMonSwitchEntry 2 }
zxAnEnvDevMonSwitchTrapEnable OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables the environment device abnormal trap."
DEFVAL { disabled }
::= { zxAnEnvDevMonSwitchEntry 3 }
zxAnEnvDevMonSwitchNormalStatus OBJECT-TYPE
SYNTAX INTEGER
{
lowLevel(1),
highLevel(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The normal status of the environment device."
DEFVAL { lowLevel }
::= { zxAnEnvDevMonSwitchEntry 4 }
zxAnEnvDevMonSwitchCurrStatus OBJECT-TYPE
SYNTAX INTEGER
{
lowLevel(1),
highLevel(2),
unknown(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the environment device. "
::= { zxAnEnvDevMonSwitchEntry 5 }
-------------------------------------------------------------------------------
-- 21. zxAnEnvMonNotifications
-------------------------------------------------------------------------------
---envTempHigh alarm
zxAnEnvHighTempAlm NOTIFICATION-TYPE
OBJECTS { zxAnEnvTemp, zxAnEnvTempHighAlmThreshold }
STATUS current
DESCRIPTION
"The environment temperature has exceeded high temperature
threshold zxAnEnvTempHighAlmThreshold.
The zxAnEnvTemp object identifies the current temperature."
::= { zxAnEnvMonTempTraps 1 }
zxAnEnvHighTempClr NOTIFICATION-TYPE
OBJECTS { zxAnEnvTemp, zxAnEnvTempHighAlmThreshold }
STATUS current
DESCRIPTION
"The environment temperature has returned to normal operating
temperature from zxAnEnvTempHighAlmThreshold.
The zxAnEnvTemp object identifies the current temperature."
::= { zxAnEnvMonTempTraps 2 }
zxAnEnvTempSensorFailure NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"It indicates that the temperature sensor is in fault."
::= { zxAnEnvMonTempTraps 5 }
zxAnEnvCriticalTempAlm NOTIFICATION-TYPE
OBJECTS { zxAnEnvTemp, zxAnEnvTempCriticalAlmThreshold }
STATUS current
DESCRIPTION
"The environment temperature has exceeded critical temperature
threshold zxAnEnvTempCriticalAlmThreshold.
The zxAnEnvTemp object identifies the current temperature."
::= { zxAnEnvMonTempTraps 6 }
zxAnEnvCriticalTempClr NOTIFICATION-TYPE
OBJECTS { zxAnEnvTemp, zxAnEnvTempCriticalAlmThreshold }
STATUS current
DESCRIPTION
"The environment temperature has returned to normal operating
temperature from zxAnEnvTempCriticalAlmThreshold.
The zxAnEnvTemp object identifies the current temperature."
::= { zxAnEnvMonTempTraps 7 }
zxAnEnvLowTempAlm NOTIFICATION-TYPE
OBJECTS { zxAnEnvTemp, zxAnEnvTempLowAlmThreshold }
STATUS current
DESCRIPTION
"The environment temperature is below low temperature
threshold zxAnEnvTempLowAlmThreshold.
The zxAnEnvTemp object identifies the current temperature."
::= { zxAnEnvMonTempTraps 8 }
zxAnEnvLowTempClr NOTIFICATION-TYPE
OBJECTS { zxAnEnvTemp, zxAnEnvTempLowAlmThreshold }
STATUS current
DESCRIPTION
"The environment temperature has returned to normal operating
temperature from zxAnEnvTempLowAlmThreshold.
The zxAnEnvTemp object identifies the current temperature."
::= { zxAnEnvMonTempTraps 9 }
zxAnEnvCardShutdownAlm NOTIFICATION-TYPE
OBJECTS { zxAnEnvCardShutdownReason,
zxAnCardTemp,
zxAnEnvTemp,
zxAnEnvEmergencyBatteryVoltage,
zxAnEnvEmergencyBatteryThreshold }
STATUS current
DESCRIPTION
"A zxAnEnvCardShutdownAlm trap is sent when the card has
been shut down because agent has detected that the temperature
is too high or the AC power is failure and the battery voltage
is lower than zxAnEnvEmergencyBatteryThreshold.
zxAnEnvCardShutdownReason indicates the real reason.
When zxAnEnvCardShutdownReason is envHighTemperature ( 1 ),
it means the environment temperature is too high,
zxAnEnvTemp is the value of current environment temperature,
zxAnCardTemp is invalid and should be zero.
zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold
are invalid and should be zero.
When zxAnEnvCardShutdownReason is cardHighTemperature ( 2 ),
it means the card temperature is too high,
zxAnCardTemp is the value of current card temperature,
zxAnEnvTemp is invalid and should be zero.
zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold
are invalid and should be zero.
When zxAnEnvCardShutdownReason is chipHighTemperature ( 3 ),
it means the temperature of the chip on the card is too high,
zxAnCardTemp and zxAnEnvTemp are invalid and should be zero.
zxAnEnvEmergencyBatteryVoltage and zxAnEnvEmergencyBatteryThreshold
are invalid and should be zero.
When zxAnEnvCardShutdownReason is emergencyPowerSaving ( 4 ),
it means the AC power is failure, the emergency power saving action
has been taken, zxAnCardTemp and zxAnEnvTemp are invalid
and should be zero.
zxAnEnvEmergencyBatteryVoltage is the value of the current battery
voltage, zxAnEnvEmergencyBatteryThreshold is the threshold of the
battery voltage.
"
::= { zxAnEnvMonTempTraps 30 }
zxAnEnvCardShutdownClr NOTIFICATION-TYPE
OBJECTS { zxAnEnvCardShutdownReason,
zxAnCardTemp,
zxAnEnvTemp,
zxAnEnvEmergencyBatteryVoltage,
zxAnEnvEmergencyBatteryThreshold }
STATUS current
DESCRIPTION
"A zxAnEnvCardShutdownClr trap is sent when the card
temperature becomes normal,
or the environment temperature becomes normal,
or the chip temperature becomes normal,
or the battery voltage is higher than
zxAnEnvEmergencyBatteryThreshold or AC power becomes normal."
::= { zxAnEnvMonTempTraps 31 }
zxAnEnvTemperatureAbnormalAlm NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"In temperature control mode, a zxAnEnvTemperatureAbnormalAlm trap
is sent when the environment temperature can't be read."
::= { zxAnEnvMonTempTraps 32 }
zxAnEnvTemperatureAbnormalClr NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A zxAnEnvTemperatureAbnormalClr trap is sent when
the zxAnEnvTemperatureAbnormalAlm is cleared."
::= { zxAnEnvMonTempTraps 33 }
zxAnEnvNearCriticalTempAlm NOTIFICATION-TYPE
OBJECTS {
zxAnEnvTemp,
zxAnEnvTempCriticalAlmThreshold
}
STATUS current
DESCRIPTION
"A zxAnEnvNearCriticalTempAlm trap is sent when the environment
temperature is close to the environment critical temperature alarm
threshold."
::= { zxAnEnvMonTempTraps 34 }
zxAnEnvNearCriticalTempClr NOTIFICATION-TYPE
OBJECTS {
zxAnEnvTemp,
zxAnEnvTempCriticalAlmThreshold
}
STATUS current
DESCRIPTION
"A zxAnEnvNearCriticalTempClr trap is sent when
the zxAnEnvNearCriticalTempAlm is cleared."
::= { zxAnEnvMonTempTraps 35 }
zxAnEnvCardNearCriticalTempAlm NOTIFICATION-TYPE
OBJECTS {
zxAnCardTemp,
zxAnCardCriticalTempAlmThreshold
}
STATUS current
DESCRIPTION
"A zxAnEnvCardNearCriticalTempAlm trap is sent when the card
temperature is close to the card critical temperature alarm
threshold."
::= { zxAnEnvMonTempTraps 36 }
zxAnEnvCardNearCriticalTempClr NOTIFICATION-TYPE
OBJECTS {
zxAnCardTemp,
zxAnCardCriticalTempAlmThreshold
}
STATUS current
DESCRIPTION
"A zxAnEnvCardNearCriticalTempClr trap is sent when
the zxAnEnvCardNearCriticalTempAlm is cleared."
::= { zxAnEnvMonTempTraps 37 }
zxAnEnvOptNearCriticalTempAlm NOTIFICATION-TYPE
OBJECTS {
zxAnCardOptHighestTemp,
zxAnCardOptCriticalTempAlmThresh,
zxAnCardOptHighestTempPortNo
}
STATUS current
DESCRIPTION
"A zxAnEnvOptNearCriticalTempAlm trap is sent when the optical
module temperature is close to the optical module critical
temperature alarm threshold."
::= { zxAnEnvMonTempTraps 38 }
zxAnEnvOptNearCriticalTempClr NOTIFICATION-TYPE
OBJECTS {
zxAnCardOptHighestTemp,
zxAnCardOptCriticalTempAlmThresh,
zxAnCardOptHighestTempPortNo
}
STATUS current
DESCRIPTION
"A zxAnEnvOptNearCriticalTempClr trap is sent when
the zxAnEnvOptNearCriticalTempAlm is cleared."
::= { zxAnEnvMonTempTraps 39 }
zxAnEnvHeatRadiationAbnormalAlm NOTIFICATION-TYPE
OBJECTS {
zxAnEnvTemp,
zxAnCardTemp,
zxAnCardHeatRadiationAlmThresh
}
STATUS current
DESCRIPTION
"A zxAnEnvHeatRadiationAbnormalAlm trap is sent when the
temperature difference between the card and the environment
exceeds the zxAnCardHeatRadiationAlmThresh."
::= { zxAnEnvMonTempTraps 40 }
zxAnEnvHeatRadiationAbnormalClr NOTIFICATION-TYPE
OBJECTS {
zxAnEnvTemp,
zxAnCardTemp,
zxAnCardHeatRadiationAlmThresh
}
STATUS current
DESCRIPTION
"A zxAnEnvHeatRadiationAbnormalClr trap is sent when
the zxAnEnvHeatRadiationAbnormalAlm is cleared."
::= { zxAnEnvMonTempTraps 41 }
---interface link down alarm
zxAnEnvMonitorInterfaceLinkDown NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"It indicates that the agent has detected that the
link at the environment monitoring interface has been down."
::= { zxAnEnvMonInterfaceTraps 1 }
zxAnEnvMonitorInterfaceLinkUp NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"It indicates that the agent has detected that the
link at the environment monitoring interface has been up."
::= { zxAnEnvMonInterfaceTraps 2 }
--- Power Supply Alarm
zxAnEnvPowerSupplyModuleDown NOTIFICATION-TYPE
OBJECTS { zxAnPowerSupplyOperStatus }
STATUS current
DESCRIPTION
"It indicates that the power supply module is down."
::= { zxAnEnvMonPowerSupplyTraps 1 }
zxAnEnvPowerSupplyModuleUp NOTIFICATION-TYPE
OBJECTS { zxAnPowerSupplyOperStatus }
STATUS current
DESCRIPTION
"It indicates that the power supply module is up."
::= { zxAnEnvMonPowerSupplyTraps 2 }
zxAnEnvPowerOverVoltageAlm NOTIFICATION-TYPE
OBJECTS { zxAnPowerSupplyInVoltage, zxAnPowerInVoltageUpperThresh }
STATUS current
DESCRIPTION
"It indicates that the input voltage of power supply is
over-voltage."
::= { zxAnEnvMonPowerSupplyTraps 3 }
zxAnEnvPowerOverVoltageClr NOTIFICATION-TYPE
OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageUpperThresh }
STATUS current
DESCRIPTION
"It indicates that the over-voltage fault is cleared."
::= { zxAnEnvMonPowerSupplyTraps 4 }
zxAnEnvPowerUnderVoltageAlm NOTIFICATION-TYPE
OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageLowerThresh }
STATUS current
DESCRIPTION
"It indicates that the input voltage of power supply is
under-voltage."
::= { zxAnEnvMonPowerSupplyTraps 5 }
zxAnEnvPowerUnderVoltageClr NOTIFICATION-TYPE
OBJECTS { zxAnPowerSupplyInVoltage,zxAnPowerInVoltageLowerThresh }
STATUS current
DESCRIPTION
"It indicates that the under-voltage fault is cleared."
::= { zxAnEnvMonPowerSupplyTraps 6 }
zxAnEnvPowerOff NOTIFICATION-TYPE
OBJECTS { zxAnPowerSupplyInVoltageStatus }
STATUS current
DESCRIPTION
"It indicates that the power supply is off."
::= { zxAnEnvMonPowerSupplyTraps 7 }
zxAnEnvPowerOn NOTIFICATION-TYPE
OBJECTS { zxAnPowerSupplyInVoltageStatus }
STATUS current
DESCRIPTION
"It indicates that the power supply off fault is cleared."
::= { zxAnEnvMonPowerSupplyTraps 8 }
zxAnEnvEmergencyPowerSaveAlm NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The current power supply switches to storage battery,
the emergency power saving action has been taken."
::= { zxAnEnvMonPowerSupplyTraps 9 }
zxAnEnvEmergencyPowerSaveClr NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The current power supply switches to normal AC power."
::= { zxAnEnvMonPowerSupplyTraps 10 }
zxAnEnvACPowerDownAlm NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A zxAnEnvACPowerDownAlm trap is sent when the agent detects no AC
power input."
::= { zxAnEnvMonPowerSupplyTraps 11 }
zxAnEnvACPowerDownClr NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A zxAnEnvACPowerDownClr trap is sent when the agent detects AC
power input."
::= { zxAnEnvMonPowerSupplyTraps 12 }
zxAnEnvNoBatteryAlm NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A zxAnEnvNoBatteryAlm trap is sent when no battery found by
the agent."
::= { zxAnEnvMonPowerSupplyTraps 13 }
zxAnEnvNoBatteryClr NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A zxAnEnvNoBatteryClr trap is sent when the battery has been found
by the agent."
::= { zxAnEnvMonPowerSupplyTraps 14 }
zxAnEnvBatteryUnderVoltageAlm NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A zxAnEnvBatteryUnderVoltageAlm trap is sent when the battery
voltage is under-voltage."
::= { zxAnEnvMonPowerSupplyTraps 15 }
zxAnEnvBatteryUnderVoltageClr NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"A zxAnEnvBatteryUnderVoltageClr trap is sent when the battery
voltage becomes normal."
::= { zxAnEnvMonPowerSupplyTraps 16 }
--- Fan Alarm
zxAnEnvFanLinkDown NOTIFICATION-TYPE
OBJECTS { zxAnEnvFanOnlineStatus }
STATUS current
DESCRIPTION
"It indicates that the agent has detected that fan is offline."
::= { zxAnEnvMonFanTraps 1 }
zxAnEnvFanLinkUp NOTIFICATION-TYPE
OBJECTS { zxAnEnvFanOnlineStatus }
STATUS current
DESCRIPTION
"It indicates that the agent has detected that fan is online."
::= { zxAnEnvMonFanTraps 2 }
zxAnEnvFanTrayLinkDown NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"It indicates that the agent has detected that the
link at the fan card interface has been down."
::= { zxAnEnvMonFanTraps 3 }
zxAnEnvFanTrayLinkUp NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"It indicates that the agent has detected that the
link at the fan card interface has been up."
::= { zxAnEnvMonFanTraps 4 }
zxAnEnvFanFailureAlm NOTIFICATION-TYPE
OBJECTS { zxAnEnvFanOperStatus }
STATUS current
DESCRIPTION
"It indicates that the fan is in fault."
::= { zxAnEnvMonFanTraps 5 }
zxAnEnvFanFailureClr NOTIFICATION-TYPE
OBJECTS { zxAnEnvFanOperStatus }
STATUS current
DESCRIPTION
"It indicates that the fan's fault is cleared."
::= { zxAnEnvMonFanTraps 6 }
zxAnEnvDeviceAbnormalAlm NOTIFICATION-TYPE
OBJECTS {
zxAnEnvDevMonSwitchDeviceId,
zxAnEnvDevMonSwitchNormalStatus,
zxAnEnvDevMonSwitchCurrStatus,
zxAnEnvDeviceName
}
STATUS current
DESCRIPTION
"A zxAnEnvDeviceAbnormalAlm trap is sent when the current status
of environment device is inconsistent with normal status."
::= { zxAnEnvDeviceTraps 1 }
zxAnEnvDeviceAbnormalClr NOTIFICATION-TYPE
OBJECTS {
zxAnEnvDevMonSwitchDeviceId,
zxAnEnvDevMonSwitchNormalStatus,
zxAnEnvDevMonSwitchCurrStatus,
zxAnEnvDeviceName
}
STATUS current
DESCRIPTION
"A zxAnEnvDeviceAbnormalClr trap is sent when current status
of environment device is consistent with normal status."
::= { zxAnEnvDeviceTraps 2 }
-------------------------------------------------------------------------------
-- 31. zxAnEnvMonConformance
-------------------------------------------------------------------------------
zxAnEnvMonConformance OBJECT IDENTIFIER ::= { zxAnEnvMonMib 4 }
zxAnEnvMonCompliances OBJECT IDENTIFIER ::= { zxAnEnvMonConformance 1 }
zxAnEnvMonGroups OBJECT IDENTIFIER ::= { zxAnEnvMonConformance 2 }
zxAnEnvMonCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement the
ZTE-AN-ENVMON-MIB."
MODULE -- this module
MANDATORY-GROUPS {
zxAnEnvMonCapabilitiesGroup,
zxAnEnvTempGroup,
zxAnEnvCardTempGroup,
zxAnEnvInterfaceGroup,
zxAnEnvPowerSupplyGroup,
zxAnEnvFanTrayTableGroup,
zxAnEnvFanTableGroup,
zxAnEnvMonNotificationsGroup
}
::= { zxAnEnvMonCompliances 1 }
zxAnEnvMonCapabilitiesGroup OBJECT-GROUP
OBJECTS { zxAnEnvMonCapabilities
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent environment
management capabilities of this equipment. The bit value 1 means
the function represented by this bit is supported by this
equipment."
::= { zxAnEnvMonGroups 1 }
zxAnEnvTempGroup OBJECT-GROUP
OBJECTS { zxAnEnvTemp,
zxAnEnvTempHighAlmThreshold,
zxAnEnvTempCriticalAlmThreshold,
zxAnEnvTempLowAlmThreshold
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent the
temperature information of this equipment/card and to set the
temperature alarm threshold of the environment/card."
::= { zxAnEnvMonGroups 2 }
zxAnEnvCardTempGroup OBJECT-GROUP
OBJECTS { zxAnCardTemp,
zxAnCardEnvHis15MinTemp,
zxAnCardEnvHis1DayTemp,
zxAnCardEnvRiseAlmThresh,
zxAnCardEnvClrRiseAlmThresh,
zxAnCardEnvRiseWarnThresh,
zxAnCardEnvClrRiseWarnThresh,
zxAnCardEnvFallWarnThresh,
zxAnCardEnvClrFallWarnThresh,
zxAnCardEnvFallAlmThresh,
zxAnCardEnvClrFallAlmThresh,
zxAnCardEnvAlmPrfConfRowStatus,
zxAnCardEnvAlmPrf,
zxAnCardEnvAlmPrfApplyRowStatus,
zxAnCardEnvAlmPrfRowStatus
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent temperature
performance of the card environment."
::= { zxAnEnvMonGroups 3 }
zxAnEnvInterfaceGroup OBJECT-GROUP
OBJECTS { zxAnEnvMonInterfaceUsage,
zxAnEnvEpmConnectPort,
zxAnEnvBackplaneInterfaceUsage
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent the
interface connection of the equipment."
::= { zxAnEnvMonGroups 4 }
zxAnEnvPowerSupplyGroup OBJECT-GROUP
OBJECTS { zxAnPowerSupplyMaxPowerNum,
zxAnPowerSupplyOperStatus,
zxAnPowerSupplyInVoltage,
zxAnPowerSupplyInVoltageStatus,
zxAnPowerInVoltageUpperThresh,
zxAnPowerInVoltageLowerThresh,
zxAnPowerSupplyInCurrent,
zxAnPowerInCurrentThresh
}
STATUS current
DESCRIPTION
"The collection of objects which are used to provide power
management functions, include power count and the voltage status
of the power supply."
::= { zxAnEnvMonGroups 5 }
zxAnEnvFanTrayTableGroup OBJECT-GROUP
OBJECTS { zxAnFanTrayAlarmBeepEnable,
zxAnFanTrayAutoSwitchByCardUp,
zxAnFanTrayHardwareVersion,
zxAnFanTraySoftwareVersion,
zxAnFanTraySpeedCtrlMode,
zxAnFanTrayLowSpeed,
zxAnFanTrayStdSpeed,
zxAnFanTrayHighSpeed,
zxAnFanTraySuperSpeed,
zxAnFanTrayLowSpeedShiftTemp,
zxAnFanTrayStdSpeedShiftTemp,
zxAnFanTrayHighSpeedShiftTemp,
zxAnFanTraySuperSpeedShiftTemp,
zxAnFanTrayLowSpeedPercent,
zxAnFanTrayStdSpeedPercent,
zxAnFanTrayHighSpeedPercent,
zxAnFanTraySuperSpeedPercent,
zxAnFanTraySn
}
STATUS current
DESCRIPTION
"The collection of objects which are used to provide fan management
functions, include setting the speed control mode and the
percentage of speed of the different speed level of the fan."
::= { zxAnEnvMonGroups 6 }
zxAnEnvFanTableGroup OBJECT-GROUP
OBJECTS { zxAnEnvFanConfSpeedLevel,
zxAnEnvFanActualSpeedLevel,
zxAnEnvFanAdminStatus,
zxAnEnvFanOperStatus,
zxAnEnvFanOnlineStatus,
zxAnEnvFanActualSpeed
}
STATUS current
DESCRIPTION
"The collection of objects which are used to provide the speed
information and operational status of the fan."
::= { zxAnEnvMonGroups 7 }
zxAnEnvMonNotificationsGroup OBJECT-GROUP
OBJECTS { zxAnEnvHighTempAlm,
zxAnEnvHighTempClr,
zxAnEnvMonitorInterfaceLinkDown,
zxAnEnvMonitorInterfaceLinkUp,
zxAnEnvFanLinkDown,
zxAnEnvFanLinkUp,
zxAnEnvTempSensorFailure,
zxAnEnvFanFailureAlm,
zxAnEnvFanFailureClr,
zxAnEnvPowerSupplyModuleDown,
zxAnEnvPowerSupplyModuleUp,
zxAnEnvFanTrayLinkDown,
zxAnEnvFanTrayLinkUp,
zxAnEnvPowerOverVoltageAlm,
zxAnEnvPowerOverVoltageClr,
zxAnEnvPowerUnderVoltageAlm,
zxAnEnvPowerUnderVoltageClr,
zxAnEnvPowerOff,
zxAnEnvPowerOn,
zxAnEnvACPowerDownAlm,
zxAnEnvACPowerDownClr,
zxAnEnvNoBatteryAlm,
zxAnEnvNoBatteryClr,
zxAnEnvBatteryUnderVoltageAlm,
zxAnEnvBatteryUnderVoltageClr,
zxAnEnvCardShutdownAlm,
zxAnEnvCardShutdownClr,
zxAnEnvCriticalTempAlm,
zxAnEnvCriticalTempClr,
zxAnEnvLowTempAlm,
zxAnEnvLowTempClr,
zxAnEnvOptNearCriticalTempAlm,
zxAnEnvOptNearCriticalTempClr,
zxAnEnvHeatRadiationAbnormalAlm,
zxAnEnvHeatRadiationAbnormalClr
}
STATUS current
DESCRIPTION
"The notifications which indicate specific changes, include
temperature, fan status, power status and gpon card status."
::= { zxAnEnvMonGroups 8 }
END
Reference in New Issue Copy Permalink