mibs/MIBS/GBOND-MIB

2169 lines
81 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
GBOND-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
mib-2,
Unsigned32,
Gauge32
FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION,
TruthValue,
RowStatus,
PhysAddress
FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580]
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
ifIndex
FROM IF-MIB -- [RFC2863]
HCPerfCurrentCount,
HCPerfIntervalCount,
HCPerfIntervalThreshold,
HCPerfValidIntervals,
HCPerfInvalidIntervals,
HCPerfTimeElapsed,
HCPerfTotalCount
FROM HC-PerfHist-TC-MIB -- [RFC3705]
;
------------------------------------------------------------------------
gBondMIB MODULE-IDENTITY
LAST-UPDATED "201203120000Z" -- Mar 12, 2012
ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO
"WG charter:
http://www.ietf.org/html.charters/adslmib-charter.html
Mailing Lists:
General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address
Chair: Menachem Dodge
Postal: ECI Telecom, Ltd.
30 Hasivim St.,
Petach-Tikva 4951169
Israel
Phone: +972-3-926-8421
EMail: menachem.dodge@ecitele.com
Editor: Edward Beili
Postal: Actelis Networks, Inc.
25 Bazel St., P.O.B. 10173
Petach-Tikva 49103
Israel
Phone: +972-3-924-3491
EMail: edward.beili@actelis.com
Editor: Moti Morgenstern
Postal: ECI Telecom
30 Hasivim St.
Petach-Tikva 4951169
Israel
Phone: +972-3-926-6258
EMail: moti.morgenstern@ecitele.com"
DESCRIPTION
"The objects in this MIB module are used to manage the
multi-pair bonded xDSL Interfaces, defined in ITU-T
recommendations G.998.1, G.998.2 and G.998.3.
This MIB module MUST be used in conjunction with a bonding
scheme specific MIB module, that is, G9981-MIB, G9982-MIB or
G9983-MIB.
The following references are used throughout this MIB module:
[G.998.1] refers to:
ITU-T Recommendation G.998.1: 'ATM-based multi-pair bonding',
January 2005.
[G.998.2] refers to:
ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair
bonding', January 2005.
[G.998.3] refers to:
ITU-T Recommendation G.998.3: 'Multi-pair bonding using
time-division inverse multiplexing', January 2005.
[TR-159] refers to:
Broadband Forum Technical Report: 'Management Framework for
xDSL Bonding', December 2008.
Naming Conventions:
BCE - Bonding Channel Entity
BTU - Bonding Transmission Unit
BTU-C - Bonding Transmission Unit, CO side
BTU-R - Bonding Transmission Unit, Remote Terminal (CPE) side
CO - Central Office
CPE - Customer Premises Equipment
GBS - Generic Bonding Sublayer
PM - Performance Monitoring
SNR - Signal to Noise Ratio
TCA - Threshold Crossing Alert
Copyright (C) The IETF Trust (2012).
This version of this MIB module is part of RFC XXXX;
see the RFC itself for full legal notices."
REVISION "201203120000Z" -- Mar 12, 2012
DESCRIPTION "Initial version, published as RFC XXXX."
-- EdNote: Replace XXXX with the actual RFC number &
-- remove this note
::= { mib-2 211 }
-- http://www.iana.org/assignments/smi-numbers.
-- Sections of the module
-- Structured as recommended by [RFC4181], Appendix D
gBondObjects OBJECT IDENTIFIER ::= { gBondMIB 1 }
gBondConformance OBJECT IDENTIFIER ::= { gBondMIB 2 }
-- Groups in the module
gBondPort OBJECT IDENTIFIER ::= { gBondObjects 1 }
gBondBce OBJECT IDENTIFIER ::= { gBondObjects 2 }
-- Textual Conventions
GBondSchemeList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention defines a bitmap of possible ITU-T
G.998 (G.Bond) bonding schemes. Currently there are 3 bonding
schemes defined: G.998.1, G.998.2 and G.998.3, identified by
bit values g9981(1), g9982(2) and g9983(3), respectively.
An additional value of none(0), can be returned as a result
of GET operation, when an value of the object cannot be
determined (for example a peer GBS cannot be reached), the port
does not support any kind of bonding or when a single-BCE
G.998.2 GBS supports bonding (frame fragmentation/reassembly)
bypass."
SYNTAX BITS {
none(0),
g9981(1),
g9982(2),
g9983(3)
}
GBondScheme ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention defines ITU-T G.998 bonding scheme
values. Possible values are:
none(0) - no bonding (e.g. on single-BCE G.998.2 GBS) or
unknown
g9981(1) - G.998.1 (G.Bond/ATM)
g9982(2) - G.998.2 (G.Bond/Ethernet)
g9983(3) - G.998.3 (G.Bond/TDIM)."
SYNTAX INTEGER {
none(0),
g9981(1),
g9982(2),
g9983(3)
}
GBondPm1DayIntervalThreshold ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"This textual convention defines a range of values that may be
set in a fault threshold alarm control for a 1-day performance
monitoring interval.
As the number of seconds in a 1-day interval numbers at most
86400, objects of this type may have a range of 0...86400,
where the value of 0 disables the alarm."
SYNTAX Unsigned32 (0..86400)
-- Port Notifications Group
gBondPortNotifications OBJECT IDENTIFIER ::= { gBondPort 0 }
gBondLowUpRateCrossing NOTIFICATION-TYPE
OBJECTS {
-- ifIndex is not needed here since we are under specific GBS
gBondPortStatUpDataRate,
gBondPortConfThreshLowUpRate
}
STATUS current
DESCRIPTION
"This notification indicates that the G.Bond port' upstream
data rate has reached/dropped below or exceeded the low
upstream rate threshold, specified by
gBondPortConfThreshLowUpRate.
This notification MAY be sent for the -O subtype ports
while the port is up, on the crossing event in both
directions: from normal (rate is above the threshold) to low
(rate equals the threshold or below it) and from low to
normal. This notification is not applicable to the -R
subtypes.
It is RECOMMENDED that a small debouncing period of 2.5 sec,
between the detection of the condition and notification,
is implemented to prevent simultaneous LinkUp/LinkDown and
gBondLowUpRateCrossing notifications to be sent.
The adaptive nature of the G.Bond technology allows the port
to adapt itself to the changes in the copper environment,
e.g., an impulse noise, alien crosstalk, or a
micro-interruption may temporarily drop one or more BCEs in
the aggregation group, causing a rate degradation of the
aggregated G.Bond link. The dropped BCEs would then try to
re-initialize, possibly at a lower rate than before, adjusting
the rate to provide required target SNR margin.
Generation of this notification is controlled by the
gBondPortConfLowRateCrossingEnable object.
This object maps to the TR-159 notification
nGroupLowUpRateCrossing."
REFERENCE
"[TR-159] 5.5.1.24"
::= { gBondPortNotifications 1 }
gBondLowDnRateCrossing NOTIFICATION-TYPE
OBJECTS {
-- ifIndex is not needed here since we are under specific GBS
gBondPortStatDnDataRate,
gBondPortConfThreshLowDnRate
}
STATUS current
DESCRIPTION
"This notification indicates that the G.Bond port' downstream
data rate has reached/dropped below or exceeded the low
downstream rate threshold, specified by
gBondPortConfThreshLowDnRate.
This notification MAY be sent for the -O subtype ports
while the port is up, on the crossing event in both
directions: from normal (rate is above the threshold) to low
(rate equals the threshold or below it) and from low to
normal. This notification is not applicable to the -R
subtypes.
It is RECOMMENDED that a small debouncing period of 2.5 sec,
between the detection of the condition and notification,
is implemented to prevent simultaneous LinkUp/LinkDown and
gBondLowDnRateCrossing notifications to be sent.
The adaptive nature of the G.Bond technology allows the port
to adapt itself to the changes in the copper environment,
e.g., an impulse noise, alien crosstalk, or a
micro-interruption may temporarily drop one or more BCEs in
the aggregation group, causing a rate degradation of the
aggregated G.Bond link. The dropped BCEs would then try to
re-initialize, possibly at a lower rate than before,
adjusting the rate to provide required target SNR margin.
Generation of this notification is controlled by the
gBondPortConfLowRateCrossingEnable object.
This object maps to the TR-159 notification
nGroupLowDownRateCrossing."
REFERENCE
"[TR-159] 5.5.1.25"
::= { gBondPortNotifications 2}
gBondPmTca15MinESCrossing NOTIFICATION-TYPE
OBJECTS {
-- ifIndex is not needed here since we are under specific GBS
gBondPortPmCur15MinES,
gBondPortPmTcaProfileThresh15MinES
}
STATUS current
DESCRIPTION
"This notification indicates that the Errored Seconds threshold,
specified by gBondPortPmTcaProfileThresh15MinES, has been
reached or exceeded for the GPS port.
Generation of this notification is controlled by
gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh15MinES objects.
This object maps to the TR-159 notification
nGroupPerfTca15MinES."
REFERENCE
"[TR-159] 5.5.1.42"
::= { gBondPortNotifications 3}
gBondPmTca15MinSESCrossing NOTIFICATION-TYPE
OBJECTS {
-- ifIndex is not needed here since we are under specific GBS
gBondPortPmCur15MinSES,
gBondPortPmTcaProfileThresh15MinSES
}
STATUS current
DESCRIPTION
"This notification indicates that the Severely Errored Seconds
threshold, specified by gBondPortPmTcaProfileThresh15MinSES,
has been reached or exceeded for the GPS port.
Generation of this notification is controlled by
gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh15MinSES objects.
This object maps to the TR-159 notification
nGroupPerfTca15MinSES."
REFERENCE
"[TR-159] 5.5.1.43"
::= { gBondPortNotifications 4}
gBondPmTca15MinUASCrossing NOTIFICATION-TYPE
OBJECTS {
-- ifIndex is not needed here since we are under specific GBS
gBondPortPmCur15MinUAS,
gBondPortPmTcaProfileThresh15MinUAS
}
STATUS current
DESCRIPTION
"This notification indicates that the Unavailable Seconds
threshold, specified by gBondPortPmTcaProfileThresh15MinES,
has been reached or exceeded for the GPS port.
Generation of this notification is controlled by
gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh15MinUAS objects.
This object maps to the TR-159 notification
nGroupPerfTca15MinUAS."
REFERENCE
"[TR-159] 5.5.1.44"
::= { gBondPortNotifications 5}
gBondPmTca1DayESCrossing NOTIFICATION-TYPE
OBJECTS {
-- ifIndex is not needed here since we are under specific GBS
gBondPortPmCur1DayES,
gBondPortPmTcaProfileThresh1DayES
}
STATUS current
DESCRIPTION
"This notification indicates that the Errored Seconds threshold,
specified by gBondPortPmTcaProfileThresh1DayES, has been
reached or exceeded for the GPS port.
Generation of this notification is controlled by
gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh1DayES objects.
This object maps to the TR-159 notification
nGroupPerfTca1DayES."
REFERENCE
"[TR-159] 5.5.1.54"
::= { gBondPortNotifications 6}
gBondPmTca1DaySESCrossing NOTIFICATION-TYPE
OBJECTS {
-- ifIndex is not needed here since we are under specific GBS
gBondPortPmCur1DaySES,
gBondPortPmTcaProfileThresh1DaySES
}
STATUS current
DESCRIPTION
"This notification indicates that the Severely Errored Seconds
threshold, specified by gBondPortPmTcaProfileThresh1DaySES,
has been reached or exceeded for the GPS port.
Generation of this notification is controlled by
gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh1DaySES objects.
This object maps to the TR-159 notification
nGroupPerfTca1DaySES."
REFERENCE
"[TR-159] 5.5.1.55"
::= { gBondPortNotifications 7}
gBondPmTca1DayUASCrossing NOTIFICATION-TYPE
OBJECTS {
-- ifIndex is not needed here since we are under specific GBS
gBondPortPmCur1DayUAS,
gBondPortPmTcaProfileThresh1DayUAS
}
STATUS current
DESCRIPTION
"This notification indicates that the Unavailable Seconds
threshold, specified by gBondPortPmTcaProfileThresh1DayUAS,
has been reached or exceeded for the GPS port.
Generation of this notification is controlled by
gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh1DayUAS objects.
This object maps to the TR-159 notification
nGroupPerfTca1DayUAS."
REFERENCE
"[TR-159] 5.5.1.56"
::= { gBondPortNotifications 8}
-- G.Bond Port (GBS) group
gBondPortConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for configuration of G.Bond GBS ports. Entries in this
table MUST be maintained in a persistent manner"
::= { gBondPort 1 }
gBondPortConfEntry OBJECT-TYPE
SYNTAX GBondPortConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond Port Configuration table.
Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondPortConfTable 1 }
GBondPortConfEntry ::=
SEQUENCE {
gBondPortConfAdminScheme GBondScheme,
gBondPortConfPeerAdminScheme GBondScheme,
gBondPortConfDiscoveryCode PhysAddress,
gBondPortConfTargetUpDataRate Unsigned32,
gBondPortConfTargetDnDataRate Unsigned32,
gBondPortConfThreshLowUpRate Unsigned32,
gBondPortConfThreshLowDnRate Unsigned32,
gBondPortConfLowRateCrossingEnable TruthValue,
gBondPortConfPmTcaConfProfile SnmpAdminString,
gBondPortConfPmTcaEnable TruthValue
}
gBondPortConfAdminScheme OBJECT-TYPE
SYNTAX GBondScheme
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A desired bonding scheme for a G.Bond GBS port.
The following values instruct the port to use corresponding
bonding scheme if supported:
none(0) - instructs the port not to use bonding
(only on single-BCE G.998.2 GBS)
g9981(1) - instructs the port to use G.998.1 bonding
g9982(2) - instructs the port to use G.998.2 bonding
g9983(3) - instructs the port to use G.998.3 bonding
Changing of gBondPortConfAdminScheme MUST be performed when the
link is administratively 'down', as indicated by the
ifAdminStatus object in IF-MIB.
Attempts to change this object MUST be rejected (in case of SNMP
with the error inconsistentValue), if the link is Up or
Initializing. Attempts to change this object to an unsupported
bonding scheme (see gBondPortCapSchemesSupported) SHALL be
rejected (in case of SNMP with the error wrongValue).
Setting this object to the value of 'none' must be rejected for
GBS ports with multiple BCEs (with the error inconsistentValue).
This object maps to the TR-159 attribute aGroupAdminBondScheme."
REFERENCE
"[TR-159] 5.5.1.6; IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 1 }
gBondPortConfPeerAdminScheme OBJECT-TYPE
SYNTAX GBondScheme
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A desired bonding scheme for a peer (link partner) G.Bond
port (GBS).
The following values instruct the peer port to use
corresponding bonding scheme if supported:
none(0) - instructs the port not to use bonding
(only on single-BCE G.998.2 GBS)
g9981(1) - instructs the port to use G.998.1 bonding
g9982(2) - instructs the port to use G.998.2 bonding
g9983(3) - instructs the port to use G.998.3 bonding
Changing of this object MUST be performed when the link is
administratively 'down', as indicated by the ifAdminStatus
object in IF-MIB.
Attempts to change this object MUST be rejected (in case of SNMP
with the error inconsistentValue), if the link is Up or
Initializing. Attempts to change this object to an unsupported
bonding scheme (see gBondPortCapPeerSchemesSupported) SHALL be
rejected (in case of SNMP with the error wrongValue).
This object maps to the TR-159 attribute
aGroupPeerAdminBondScheme."
REFERENCE
"[TR-159] 5.5.1.7; IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 2 }
gBondPortConfDiscoveryCode OBJECT-TYPE
SYNTAX PhysAddress (SIZE(6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Discovery Code of the G.Bond port (GBS).
A unique 6 octet long code used by the Discovery function.
This object MUST be instantiated for the -O subtype GBS before
writing operations on the gBondBceConfRemoteDiscoveryCode
(Set_if_Clear and Clear_if_Same) are performed by BCEs
associated with the GBS.
The initial value of this object for -R subtype ports after
reset is all zeroes. For -R subtype ports, the value of this
object cannot be changed directly. This value may be changed
as a result of writing operation on the
gBondBceConfRemoteDiscoveryCode object of remote BCE of -O
subtype, connected to one of the local BCEs associated with
the GBS.
Discovery MUST be performed when the link is administratively
'down', as indicated by the ifAdminStatus object in IF-MIB.
Attempts to change this object MUST be rejected (in case of
SNMP with the error inconsistentValue), if the link is Up or
Initializing.
This object maps to the TR-159 attribute
aGroupDiscoveryCode."
REFERENCE
"[TR-159] 5.5.1.20; [802.3] 61.2.2.8.3, 61.2.2.8.4,
45.2.6.6.1, 45.2.6.8, 61A.2; IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 3 }
gBondPortConfTargetUpDataRate OBJECT-TYPE
SYNTAX Unsigned32(0|1..10000000)
UNITS "Kbps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A desired G.Bond port Data Rate in the upstream direction,
in Kbps, to be achieved during initialization, under
restrictions placed upon the member BCEs by their respective
configuration settings.
This object represents a sum of individual BCE upstream data
rates, modified to compensate for fragmentation and
encapsulation overhead (e.g., for an Ethernet service, the
target data rate of 10Mbps SHALL allow lossless transmission
of full-duplex 10Mbps Ethernet frame stream with minimal
inter-frame gap).
Note that the target upstream data rate may not be achieved
during initialization (e.g., due to unavailability of required
BCEs) or the initial bandwidth could deteriorate, so that the
actual upstream data rate (gBondPortStatUpDataRate) could be less
than gBondPortConfTargetUpDataRate.
The value is limited above by 10 Gbps, to accommodate very
high speed bonded xDSL interfaces (e.g. 32 x 100Mbps).
The value between 1 and 10000000 indicates that the total
upstream data rate of the G.Bond port after initialization
SHALL be equal to the target data rate or less, if the target
upstream data rate cannot be achieved under the restrictions
configured for BCEs. In case the copper environment allows to
achieve higher upstream data rate than that specified by this
object, the excess capability SHALL be either converted to
additional SNR margin or reclaimed by minimizing transmit
power.
The value of 0 means that the target data rate is not
fixed and SHALL be set to the maximum attainable rate during
initialization (Best Effort), under specified spectral
restrictions and with desired SNR Margin per BCE.
This object is read-write for the -O subtype G.Bond ports.
It is irrelevant for the -R subtypes - attempts to read or
change this object for such ports MUST be rejected (in case of
SNMP with the error inconsistentValue).
Changing of the Target Upstream Data Rate MUST be performed
when the link is administratively 'down', as indicated by the
ifAdminStatus object in IF-MIB.
Attempts to change this object MUST be rejected (in case of SNMP
with the error inconsistentValue), if the link is Up or
Initializing.
This object maps to the TR-159 attribute aGroupTargetUpRate."
REFERENCE
"[TR-159] 5.5.1.17; IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 4 }
gBondPortConfTargetDnDataRate OBJECT-TYPE
SYNTAX Unsigned32(0|1..10000000)
UNITS "Kbps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A desired G.Bond port Data Rate in the downstream direction,
in Kbps, to be achieved during initialization, under
restrictions placed upon the member BCEs by their respective
configuration settings.
This object represents a sum of individual BCE downstream data
rates, modified to compensate for fragmentation and
encapsulation overhead (e.g., for an Ethernet service, the
target data rate of 10Mbps SHALL allow lossless transmission
of full-duplex 10Mbps Ethernet frame stream with minimal
inter-frame gap).
Note that the target downstream data rate may not be achieved
during initialization (e.g., due to unavailability of required
BCEs) or the initial bandwidth could deteriorate, so that the
actual downstream data rate (gBondPortStatDnDataRate) could be
less than gBondPortConfTargetDnDataRate.
The value is limited above by 10 Gbps, to accommodate very
high speed bonded xDSL interfaces (e.g. 32 x 100Mbps).
The value between 1 and 10000000 indicates that the total
downstream data rate of the G.Bond port after initialization
SHALL be equal to the target data rate or less, if the target
downstream data rate cannot be achieved under the restrictions
configured for BCEs. In case the copper environment allows to
achieve higher downstream data rate than that specified by
this object, the excess capability SHALL be either converted
to additional SNR margin or reclaimed by minimizing transmit
power.
The value of 0 means that the target data rate is not
fixed and SHALL be set to the maximum attainable rate during
initialization (Best Effort), under specified spectral
restrictions and with desired SNR Margin per BCE.
This object is read-write for the -O subtype G.Bond ports.
It is irrelevant for the -R subtypes - attempts to read or
change this object for such ports MUST be rejected (in case of
SNMP with the error inconsistentValue).
Changing of the Target Downstream Data Rate MUST be performed
when the link is administratively 'down', as indicated by the
ifAdminStatus object in IF-MIB.
Attempts to change this object MUST be rejected (in case of SNMP
with the error inconsistentValue), if the link is Up or
Initializing.
This object maps to the TR-159 attribute aGroupTargetDownRate."
REFERENCE
"[TR-159] 5.5.1.18; IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 5 }
gBondPortConfThreshLowUpRate OBJECT-TYPE
SYNTAX Unsigned32(1..10000000)
UNITS "Kbps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the G.Bond port low upstream rate
crossing alarm threshold. When the current value of
gBondPortStatUpDataRate for this port reaches/drops below or
exceeds this threshold, a gBondLowUpRateCrossing notification
MAY be generated if enabled by
gBondPortConfLowRateCrossingEnable.
This object is read-write for the -O subtype G.Bond ports.
It is irrelevant for the -R subtypes - attempts to read or
change this object for such ports MUST be rejected (in case of
SNMP with the error inconsistentValue).
This object maps to the TR-159 attribute
aGroupthreshLowUpRate."
REFERENCE
"[TR-159] 5.5.1.21"
::= { gBondPortConfEntry 6 }
gBondPortConfThreshLowDnRate OBJECT-TYPE
SYNTAX Unsigned32(1..10000000)
UNITS "Kbps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object configures the G.Bond port low downstream rate
crossing alarm threshold. When the current value of
gBondPortStatDnDataRate for this port reaches/drops below or
exceeds this threshold, a gBondLowDnRateCrossing notification
MAY be generated if enabled by
gBondPortConfLowRateCrossingEnable.
This object is read-write for the -O subtype G.Bond ports.
It is irrelevant for the -R subtypes - attempts to read or
change this object for such ports MUST be rejected (in case of
SNMP with the error inconsistentValue).
This object maps to the TR-159 attribute
aGroupThreshDownUpRate."
REFERENCE
"[TR-159] 5.5.1.22"
::= { gBondPortConfEntry 7 }
gBondPortConfLowRateCrossingEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether gBondLowUpRateCrossing and
gBondLowDnRateCrossing notifications should be generated
for this interface.
Value of true(1) indicates that the notifications are enabled.
Value of false(2) indicates that the notifications are
disabled.
This object is read-write for the -O subtype G.Bond ports.
It is irrelevant for the -R subtypes - attempts to read or
change this object for such ports MUST be rejected (in case of
SNMP with the error inconsistentValue).
This object maps to the TR-159 attribute
aGroupLowRateCrossingEnable."
REFERENCE
"[TR-159] 5.5.1.23"
::= { gBondPortConfEntry 8 }
gBondPortConfPmTcaConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is the index of the row in the GBS
port Alarm Configuration Profile Table for Performance Monitoring
Threshold Crossing Alerts - gBondPortAlarmConfProfileTable,
which applies to this GBS port."
DEFVAL { "DEFVAL" }
::= { gBondPortConfEntry 9 }
gBondPortConfPmTcaEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether gBondPerfTca*Crossing set of notifications
should be generated for this interface.
Value of true(1) indicates that the notifications are enabled.
Value of false(2) indicates that the notifications are disabled.
This object maps to the TR-159 attribute aGroupPerfTcaEnable."
REFERENCE
"[TR-159] 5.5.1.38"
::= { gBondPortConfEntry 10 }
gBondPortCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for capabilities of G.Bond Ports. Entries in this table
MUST be maintained in a persistent manner"
::= { gBondPort 2 }
gBondPortCapEntry OBJECT-TYPE
SYNTAX GBondPortCapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond Port Capability table.
Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondPortCapTable 1 }
GBondPortCapEntry ::=
SEQUENCE {
gBondPortCapSchemesSupported GBondSchemeList,
gBondPortCapPeerSchemesSupported GBondSchemeList,
gBondPortCapCapacity Unsigned32,
gBondPortCapPeerCapacity Unsigned32
}
gBondPortCapSchemesSupported OBJECT-TYPE
SYNTAX GBondSchemeList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bonding Capability of the G.Bond port (GBS). This is a
read-only bitmap of the possible bonding schemes supported by
the GBS. The various bit-positions are:
none(0) - GBS is capable of bonding bypass on a
single-BCE (G.998.2 only)
g9981(1) - GBS is capable of G.998.1 bonding
g9982(2) - GBS is capable of G.998.2 bonding
g9983(3) - GBS is capable of G.998.3 bonding
Note that for ports supporting multiple bonding schemes the
actual administrative scheme is set via gBondPortConfAdminScheme
object. The current operating bonding scheme is reflected in
the gBondPortStatOperScheme.
This object maps to the TR-159 attribute
aGroupBondSchemesSupported."
REFERENCE
"[TR-159] 5.5.1.2"
::= { gBondPortCapEntry 1 }
gBondPortCapPeerSchemesSupported OBJECT-TYPE
SYNTAX GBondSchemeList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bonding Capability of the peer G.Bond port (GBS). This is a
read-only bitmap of the possible bonding schemes supported by
the link partner GBS. The various bit-positions are:
none(0) - peer GBS does not support bonding or
the peer unit could not be reached or
peer GBS is capable of bonding bypass on a
single-BCE (G.998.2 only)
g9981(1) - peer GBS is capable of G.998.1 bonding
g9982(2) - peer GBS is capable of G.998.2 bonding
g9983(3) - peer GBS is capable of G.998.3 bonding
Note that for ports supporting multiple bonding schemes the
actual administrative scheme is set via
gBondPortConfPeerAdminScheme object. The current operating
bonding scheme is reflected in the gBondPortStatPeerOperScheme.
This object maps to the TR-159 attribute
aGroupBondPeerSchemesSupported."
REFERENCE
"[TR-159] 5.5.1.3"
::= { gBondPortCapEntry 2 }
gBondPortCapCapacity OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BCEs that can be aggregated by the local GBS.
The number of BCEs currently assigned to a particular G.Bond
port (gBondPortStatNumBCEs) is never greater than
gBondPortCapCapacity.
This object maps to the TR-159 attribute aGroupCapacity."
REFERENCE
"[TR-159] 5.5.1.12"
::= { gBondPortCapEntry 3 }
gBondPortCapPeerCapacity OBJECT-TYPE
SYNTAX Unsigned32 (0|1..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BCEs that can be aggregated by the peer GBS port.
Value of 0 is returned when peer Bonding Capacity is unknown
(peer cannot be reached).
This object maps to the TR-159 attribute aGroupPeerCapacity."
REFERENCE
"[TR-159] 5.5.1.13"
::= { gBondPortCapEntry 4 }
gBondPortStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides overall status information of G.Bond
ports, complementing the generic status information from the
ifTable of IF-MIB. Additional status information about
connected BCEs is available from the relevant line MIBs
This table contains live data from the equipment. As such,
it is NOT persistent."
::= { gBondPort 3 }
gBondPortStatEntry OBJECT-TYPE
SYNTAX GBondPortStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond Port Status table.
Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondPortStatTable 1 }
GBondPortStatEntry ::=
SEQUENCE {
gBondPortStatOperScheme GBondScheme,
gBondPortStatPeerOperScheme GBondScheme,
gBondPortStatUpDataRate Gauge32,
gBondPortStatDnDataRate Gauge32,
gBondPortStatFltStatus BITS,
gBondPortStatSide INTEGER,
gBondPortStatNumBCEs Unsigned32
}
gBondPortStatOperScheme OBJECT-TYPE
SYNTAX GBondScheme
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current operating bonding scheme of a G.Bond port.
The possible values are:
none(0) - bonding bypass on a single-BCE (G.998.2 only)
g9981(1) - G.998.1 bonding
g9982(2) - G.998.2 bonding
g9983(3) - G.998.3 bonding
This object maps to the TR-159 attribute
aGroupOperBondScheme."
REFERENCE
"[TR-159] 5.5.1.4"
::= { gBondPortStatEntry 1 }
gBondPortStatPeerOperScheme OBJECT-TYPE
SYNTAX GBondScheme
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current operating bonding scheme of a G.Bond port link partner.
The possible values are:
unknown(0) - peer cannot be reached due to the link state or
bonding bypass on a single-BCE (G.998.2 only)
g9981(1) - G.998.1 bonding
g9982(2) - G.998.2 bonding
g9983(3) - G.998.3 bonding
This object maps to the TR-159 attribute
aGroupPeerOperBondScheme."
REFERENCE
"[TR-159] 5.5.1.5"
::= { gBondPortStatEntry 2 }
gBondPortStatUpDataRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A current G.Bond port operational Data Rate in the upstream
direction, in bps.
This object represents an estimation of the sum of individual
BCE upstream data rates, modified to compensate for
fragmentation and encapsulation overhead (e.g., for an
Ethernet service, the target data rate of 10Mbps SHALL allow
lossless transmission of full-duplex 10Mbps Ethernet frame
stream with minimal inter-frame gap).
Note that for symmetrical interfaces gBondPortStatUpDataRate ==
gBondPortStatDnDataRate == ifSpeed.
This object maps to the TR-159 attribute aGroupUpRate."
REFERENCE
"[TR-159] 5.5.1.15"
::= { gBondPortStatEntry 3 }
gBondPortStatDnDataRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A current G.Bond port operational Data Rate in the downstream
direction, in bps.
This object represents an estimation of the sum of individual
BCE downstream data rates, modified to compensate for
fragmentation and encapsulation overhead (e.g., for an
Ethernet service, the target data rate of 10Mbps SHALL allow
lossless transmission of full-duplex 10Mbps Ethernet frame
stream with minimal inter-frame gap).
Note that for symmetrical interfaces gBondPortStatUpDataRate ==
gBondPortStatDnDataRate == ifSpeed.
This object maps to the TR-159 attribute aGroupDownRate."
REFERENCE
"[TR-159] 5.5.1.16"
::= { gBondPortStatEntry 4 }
gBondPortStatFltStatus OBJECT-TYPE
SYNTAX BITS {
noPeer(0),
peerPowerLoss(1),
peerBondSchemeMismatch(2),
bceSubTypeMismatch(3),
lowRate(4),
init(5),
ready(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond (GBS) port Fault Status. This is a bitmap of possible
conditions. The various bit positions are:
noPeer - peer GBS cannot be reached (e.g.,
no BCEs attached, all BCEs are Down
etc.).
peerPowerLoss - peer GBS has indicated impending unit
failure due to loss of local power
('Dying Gasp').
peerBondSchemeMismatch - operating bonding scheme of a peer
GBS is different from the local one.
bceSubTypeMismatch - local BCEs in the aggregation group
are not of the same sub-type, e.g.,
some BCEs in the local device are -O
while others are -R subtype.
lowRate - gBondUpRate/gBondDnRate of the port
has reached or dropped below
gBondPortConfThreshLowUpRate/
gBondPortConfThreshLowDnRate.
init - The link is Initializing, as a result of
ifAdminStatus being set to 'up' for a
particular BCE or a GBS to which the BCE
is connected.
ready - at least one BCE in the aggregation
group is detecting handshake tones.
This object is intended to supplement ifOperStatus object
in IF-MIB.
This object maps to the TR-159 attribute aGroupStatus."
REFERENCE
"[TR-159] 5.5.1.9; IF-MIB, ifOperStatus"
::= { gBondPortStatEntry 5 }
gBondPortStatSide OBJECT-TYPE
SYNTAX INTEGER {
subscriber(1),
office(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"G.Bond port mode of operation (subtype).
The value of 'subscriber' indicates the port is designated as
'-R' subtype (all BCEs assigned to this port are of subtype
'-R').
The value of the 'office' indicates that the port is
designated as '-O' subtype (all BCEs assigned to this port are
of subtype '-O').
The value of 'unknown' indicates that the port has no assigned
BCEs yet or that the assigned BCEs are not of the same side
(subTypeBCEMismatch).
This object maps to the TR-159 attribute aGroupEnd."
REFERENCE
"[TR-159] 5.5.1.11"
::= { gBondPortStatEntry 6 }
gBondPortStatNumBCEs OBJECT-TYPE
SYNTAX Unsigned32 (0..32)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of BCEs that is currently aggregated by the local GBS
(assigned to the G.Bond port using ifStackTable).
This number is never greater than gBondPortCapCapacity.
This object SHALL be automatically incremented or decremented
when a BCE is added or deleted to/from the G.Bond port using
ifStackTable.
This object maps to the TR-159 attribute aGroupNumChannels"
REFERENCE
"[TR-159] 5.5.1.14"
::= { gBondPortStatEntry 7 }
-- Performance Monitoring group
gBondPortPM OBJECT IDENTIFIER ::= { gBondPort 4 }
gBondPortPmCurTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortPmCurEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current Performance Monitoring (PM)
information for a GBS port. This table contains live data from
the equipment and as such is NOT persistent."
::= { gBondPortPM 1 }
gBondPortPmCurEntry OBJECT-TYPE
SYNTAX GBondPortPmCurEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond Port PM table.
Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex }
::= { gBondPortPmCurTable 1 }
GBondPortPmCurEntry ::=
SEQUENCE {
gBondPortPmCurES HCPerfTotalCount,
gBondPortPmCurSES HCPerfTotalCount,
gBondPortPmCurUAS HCPerfTotalCount,
gBondPortPmCur15MinValidIntervals HCPerfValidIntervals,
gBondPortPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
gBondPortPmCur15MinTimeElapsed HCPerfTimeElapsed,
gBondPortPmCur15MinES HCPerfCurrentCount,
gBondPortPmCur15MinSES HCPerfCurrentCount,
gBondPortPmCur15MinUAS HCPerfCurrentCount,
gBondPortPmCur1DayValidIntervals Unsigned32,
gBondPortPmCur1DayInvalidIntervals Unsigned32,
gBondPortPmCur1DayTimeElapsed HCPerfTimeElapsed,
gBondPortPmCur1DayES HCPerfCurrentCount,
gBondPortPmCur1DaySES HCPerfCurrentCount,
gBondPortPmCur1DayUAS HCPerfCurrentCount
}
gBondPortPmCurES OBJECT-TYPE
SYNTAX HCPerfTotalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Errored Seconds (ES) on the GBS since the BTU was
last restarted.
An Errored Second for a G.998.x interface is defined as a count
of 1-second intervals during which one or more GBS errors are
declared. The errors are specific for each bonding scheme, e.g.
- lost cells for the ATM bonding;
- lost or discarded (due to an error or a buffer overflow)
fragments for the Ethernet bonding;
- CRC4, CRC6 or CRC8 errors for the TDIM bonding
This object is inhibited during Unavailable Seconds (UAS).
This object maps to the TR-159 attribute aGroupPerfES."
REFERENCE
"[TR-159] 5.5.1.29"
::= { gBondPortPmCurEntry 1 }
gBondPortPmCurSES OBJECT-TYPE
SYNTAX HCPerfTotalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Severely Errored Seconds (SES) on the GBS since the
BTU was last restarted.
A Severely Errored Second for a G.998.x interface is defined as
a count of 1-second intervals during which GBS errors cause at
least 1% traffic loss of the nominal bonded link rate or at
least 12ms for the TDM traffic. The exact definition is specific
for each bonding scheme, e.g.
- 234 lost cells for the ATM bonding with 10Mbps nominal link
rate
- 60 lost/discarded fragments for the Ethernet bonding with
10Mbps nominal link rate and fixed 192 Byte-long fragment
size.
- 6 or more CRC4, one or more CRC6 or one or more CRC8 errors
for the TDM bonding
This object is inhibited during Unavailable Seconds (UAS).
This object maps to the TR-159 attribute aGroupPerfSES."
REFERENCE
"[TR-159] 5.5.1.30"
::= { gBondPortPmCurEntry 2 }
gBondPortPmCurUAS OBJECT-TYPE
SYNTAX HCPerfTotalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS since the BTU
was last restarted.
An Unavailable Second for a G.998.x interface is defined as a
count of 1-second intervals during which the bonded link is
unavailable. The G.998.x link becomes unavailable at the onset
of 10 contiguous SESs. The 10 SESs are included in the
unavailable time. Once unavailable, the G.998.x line becomes
available at the onset of 10 contiguous seconds with no SESs.
The 10 seconds with no SESs are excluded from unavailable time.
This object maps to the TR-159 attribute aGroupPerfUAS."
REFERENCE
"[TR-159] 5.5.1.31"
::= { gBondPortPmCurEntry 3 }
gBondPortPmCur15MinValidIntervals OBJECT-TYPE
SYNTAX HCPerfValidIntervals
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number of 15-minute intervals for which data was collected.
The value of this object will be 96 or the maximum number of
15-minute history intervals collected by the implementation
unless the measurement was (re-)started recently, in which case
the value will be the number of complete 15 minutes intervals
for which there are at least some data.
In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available.
This object maps to the TR-159 attribute
aGroupPerf15MinValidIntervals."
REFERENCE
"[TR-159] 5.5.1.32"
::= { gBondPortPmCurEntry 4 }
gBondPortPmCur15MinInvalidIntervals OBJECT-TYPE
SYNTAX HCPerfInvalidIntervals
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number of 15-minute intervals for which data was not always
available. The value will typically be zero except in cases
where the data for some intervals are not available.
This object maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals."
REFERENCE
"[TR-159] 5.5.1.33"
::= { gBondPortPmCurEntry 5 }
gBondPortPmCur15MinTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of seconds that have elapsed since the beginning of the
current 15-minute performance interval.
This object maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed."
REFERENCE
"[TR-159] 5.5.1.34"
::= { gBondPortPmCurEntry 6 }
gBondPortPmCur15MinES OBJECT-TYPE
SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the current
15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinES."
REFERENCE
"[TR-159] 5.5.1.35"
::= { gBondPortPmCurEntry 7 }
gBondPortPmCur15MinSES OBJECT-TYPE
SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Severely Errored Seconds (ES) on the GBS in the
current 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinSES."
REFERENCE
"[TR-159] 5.5.1.36"
::= { gBondPortPmCurEntry 8 }
gBondPortPmCur15MinUAS OBJECT-TYPE
SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS in the current
15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS."
REFERENCE
"[TR-159] 5.5.1.37"
::= { gBondPortPmCurEntry 9 }
gBondPortPmCur1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
UNITS "days"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number of 1-day intervals for which data was collected.
The value of this object will be 7 or the maximum number of
1-day history intervals collected by the implementation unless
the measurement was (re-)started recently, in which case the
value will be the number of complete 1-day intervals for which
there are at least some data.
In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available.
This object maps to the TR-159 attribute
aGroupPerf1DayValidIntervals."
REFERENCE
"[TR-159] 5.5.1.45"
::= { gBondPortPmCurEntry 10 }
gBondPortPmCur1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
UNITS "days"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A number of 1-day intervals for which data was not always
available. The value will typically be zero except in cases
where the data for some intervals are not available.
This object maps to the TR-159 attribute
aGroupPerf1DayInvalidIntervals."
REFERENCE
"[TR-159] 5.5.1.46"
::= { gBondPortPmCurEntry 11 }
gBondPortPmCur1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of seconds that have elapsed since the beginning of
the current 1-day performance interval.
This object maps to the TR-159 attribute
aGroupPerfCurr1DayTimeElapsed."
REFERENCE
"[TR-159] 5.5.1.47"
::= { gBondPortPmCurEntry 12 }
gBondPortPmCur1DayES OBJECT-TYPE
SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the current 1-day
performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DayES."
REFERENCE
"[TR-159] 5.5.1.48"
::= { gBondPortPmCurEntry 13 }
gBondPortPmCur1DaySES OBJECT-TYPE
SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Severely Errored Seconds (ES) on the GBS in the
current 1-day performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DaySES."
REFERENCE
"[TR-159] 5.5.1.49"
::= { gBondPortPmCurEntry 14 }
gBondPortPmCur1DayUAS OBJECT-TYPE
SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS in the current
1-day performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS."
REFERENCE
"[TR-159] 5.5.1.50"
::= { gBondPortPmCurEntry 15 }
-- PM history: 15-min buckets
gBondPortPm15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortPm15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 15-minute buckets of Performance
Monitoring information for a GBS port (a row for each 15-minute
interval, up to 96 intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { gBondPortPM 2 }
gBondPortPm15MinEntry OBJECT-TYPE
SYNTAX GBondPortPm15MinEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond Port historical 15-minute PM table.
Each entry represents performance monitoring data for a GBS port,
indexed by ifIndex, collected during a particular 15-minute
interval, indexed by gBondPortPm15MinIntervalIndex."
INDEX { ifIndex, gBondPortPm15MinIntervalIndex }
::= { gBondPortPm15MinTable 1 }
GBondPortPm15MinEntry ::=
SEQUENCE {
gBondPortPm15MinIntervalIndex Unsigned32,
gBondPortPm15MinIntervalMoniTime HCPerfTimeElapsed,
gBondPortPm15MinIntervalES HCPerfIntervalCount,
gBondPortPm15MinIntervalSES HCPerfIntervalCount,
gBondPortPm15MinIntervalUAS HCPerfIntervalCount,
gBondPortPm15MinIntervalValid TruthValue
}
gBondPortPm15MinIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous
interval; interval 96 is 24 hours ago.
Intervals 2..96 are OPTIONAL.
This object maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber."
REFERENCE
"[TR-159] 5.5.1.57"
::= { gBondPortPm15MinEntry 1 }
gBondPortPm15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of seconds over which the performance data was actually
monitored. This value will be the same as the interval duration
(900 seconds), except in a situation where performance data
could not be collected for any reason."
::= { gBondPortPm15MinEntry 2 }
gBondPortPm15MinIntervalES OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the 15-minute
performance history interval.
This object maps to the TR-159 attribute
aGroupPerf15MinIntervalES."
REFERENCE
"[TR-159] 5.5.1.59"
::= { gBondPortPm15MinEntry 3 }
gBondPortPm15MinIntervalSES OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Severely Errored Seconds (ES) on the GBS in the
15-minute performance history interval.
This object maps to the TR-159 attribute
aGroupPerf15MinIntervalSES."
REFERENCE
"[TR-159] 5.5.1.60"
::= { gBondPortPm15MinEntry 4 }
gBondPortPm15MinIntervalUAS OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS in the current
15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS."
REFERENCE
"[TR-159] 5.5.1.61"
::= { gBondPortPm15MinEntry 5 }
gBondPortPm15MinIntervalValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2).
If this history bucket is invalid the BTU-C MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is
not required as only valid history buckets are available while
invalid history buckets are simply not in the data base.
This object maps to the TR-159 attribute
aGroupPerf15MinIntervalValid."
REFERENCE
"[TR-159] 5.5.1.58"
::= { gBondPortPm15MinEntry 6 }
-- PM history: 1-day buckets
gBondPortPm1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains historical 1-day buckets of Performance
Monitoring information for a GBS port (a row for each 1-day
interval, up to 7 intervals).
Entries in this table MUST be maintained in a persistent manner."
::= { gBondPortPM 3 }
gBondPortPm1DayEntry OBJECT-TYPE
SYNTAX GBondPortPm1DayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond Port historical 1-day PM table.
Each entry represents performance monitoring data for a GBS port,
indexed by ifIndex, collected during a particular 1-day
interval, indexed by gBondPortPm1DayIntervalIndex."
INDEX { ifIndex, gBondPortPm1DayIntervalIndex }
::= { gBondPortPm1DayTable 1 }
GBondPortPm1DayEntry ::=
SEQUENCE {
gBondPortPm1DayIntervalIndex Unsigned32,
gBondPortPm1DayIntervalMoniTime HCPerfTimeElapsed,
gBondPortPm1DayIntervalES HCPerfIntervalCount,
gBondPortPm1DayIntervalSES HCPerfIntervalCount,
gBondPortPm1DayIntervalUAS HCPerfIntervalCount,
gBondPortPm1DayIntervalValid TruthValue
}
gBondPortPm1DayIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous
interval; interval 7 is 7 days ago.
Intervals 2..7 are OPTIONAL.
This object maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber."
REFERENCE
"[TR-159] 5.5.1.62"
::= { gBondPortPm1DayEntry 1 }
gBondPortPm1DayIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of seconds over which the performance data was actually
monitored. This value will be the same as the interval duration
(86400 seconds), except in a situation where performance data
could not be collected for any reason.
This object maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs."
REFERENCE
"[TR-159] 5.5.1.64"
::= { gBondPortPm1DayEntry 2 }
gBondPortPm1DayIntervalES OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the 1-day
performance history interval.
This object maps to the TR-159 attribute
aGroupPerf1DayIntervalES."
REFERENCE
"[TR-159] 5.5.1.65"
::= { gBondPortPm1DayEntry 3 }
gBondPortPm1DayIntervalSES OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Severely Errored Seconds (ES) on the GBS in the
1-day performance history interval.
This object maps to the TR-159 attribute
aGroupPerf1DayIntervalSES."
REFERENCE
"[TR-159] 5.5.1.66"
::= { gBondPortPm1DayEntry 4 }
gBondPortPm1DayIntervalUAS OBJECT-TYPE
SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS in the current
1-day performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS."
REFERENCE
"[TR-159] 5.5.1.67"
::= { gBondPortPm1DayEntry 5 }
gBondPortPm1DayIntervalValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2).
If this history bucket is invalid the BTU-C MUST NOT produce
notifications based upon the value of the counters in this
bucket.
Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is
not required as only valid history buckets are available while
invalid history buckets are simply not in the data base.
This object maps to the TR-159 attribute
aGroupPerf1DayIntervalValid."
REFERENCE
"[TR-159] 5.5.1.63"
::= { gBondPortPm1DayEntry 6 }
-- Performance Monitoring TCA Configuration profile
gBondPortPmTcaProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortPmTcaProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports definitions of Performance Monitoring (PM)
Threshold Crossing Alerts (TCA) configuration profiles for GBS
ports.
Entries in this table MUST be maintained in a persistent manner."
::= { gBondPortPM 4 }
gBondPortPmTcaProfileEntry OBJECT-TYPE
SYNTAX GBondPortPmTcaProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the GBS PM TCA Configuration table.
Each entry corresponds to a single TCA configuration profile.
Each profile contains a set of parameters for setting alarm
thresholds for various performance attributes monitored at GBS
ports. Profiles may be created/deleted using the row
creation/deletion mechanism via
gBondPortPmTcaProfileRowStatus. If an active entry is
referenced via gBondPortConfPmTcaConfProfile, the entry MUST
remain active until all references are removed.
A default profile with an index of 'DEFVAL', will always exist
and its parameters will be set to vendor specific values,
unless otherwise specified in this document."
INDEX { gBondPortPmTcaProfileName }
::= { gBondPortPmTcaProfileTable 1 }
GBondPortPmTcaProfileEntry ::=
SEQUENCE {
gBondPortPmTcaProfileName SnmpAdminString,
gBondPortPmTcaProfileThresh15MinES HCPerfIntervalThreshold,
gBondPortPmTcaProfileThresh15MinSES HCPerfIntervalThreshold,
gBondPortPmTcaProfileThresh15MinUAS HCPerfIntervalThreshold,
gBondPortPmTcaProfileThresh1DayES GBondPm1DayIntervalThreshold,
gBondPortPmTcaProfileThresh1DaySES GBondPm1DayIntervalThreshold,
gBondPortPmTcaProfileThresh1DayUAS GBondPm1DayIntervalThreshold,
gBondPortPmTcaProfileRowStatus RowStatus
}
gBondPortPmTcaProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is a unique index (name) associated with this
GBS PM TCA profile."
::= { gBondPortPmTcaProfileEntry 1 }
gBondPortPmTcaProfileThresh15MinES OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A desired threshold for the number of Errored Seconds (ES)
within any given 15-minute performance data collection interval.
If the number of ESs in a particular 15-minute collection
interval reaches or exceeds this value, a
gBondPmTca15MinESCrossing notification MAY be generated if
enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables
gBondPmTca15MinESCrossing notification.
This object maps to the TR-159 attribute
aGroupPerfThreshold15MinES."
REFERENCE
"[TR-159] 5.5.1.39"
::= { gBondPortPmTcaProfileEntry 2 }
gBondPortPmTcaProfileThresh15MinSES OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A desired threshold for the number of Severely Errored Seconds
(SES) within any given 15-minute performance data collection
interval.
If the number of SESs in a particular 15-minute collection
interval reaches or exceeds this value, a
gBondPmTca15MinSESCrossing notification MAY be generated if
enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables
gBondPmTca15MinSESCrossing notification.
This object maps to the TR-159 attribute
aGroupPerfThreshold15MinSES."
REFERENCE
"[TR-159] 5.5.1.40"
::= { gBondPortPmTcaProfileEntry 3 }
gBondPortPmTcaProfileThresh15MinUAS OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A desired threshold for the number of Unavailable Seconds (UAS)
within any given 15-minute performance data collection interval.
If the number of UASs in a particular 15-minute collection
interval reaches or exceeds this value, a
gBondPmTca15MinUASCrossing notification MAY be generated if
enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables
gBondPmTca15MinUASCrossing notification.
This object maps to the TR-159 attribute
aGroupPerfThreshold15MinUAS."
REFERENCE
"[TR-159] 5.5.1.41"
::= { gBondPortPmTcaProfileEntry 4 }
gBondPortPmTcaProfileThresh1DayES OBJECT-TYPE
SYNTAX GBondPm1DayIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A desired threshold for the number of Errored Seconds (ES)
within any given 1-day performance data collection interval.
If the number of ESs in a particular 1-day collection interval
reaches or exceeds this value, a gBondPmTca1DayESCrossing
notification MAY be generated if enabled by
gBondPortConfPmTcaEnable.
At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables
gBondPmTca1DayESCrossing notification.
This object maps to the TR-159 attribute
aGroupPerfThreshold1DayES."
REFERENCE
"[TR-159] 5.5.1.51"
::= { gBondPortPmTcaProfileEntry 5 }
gBondPortPmTcaProfileThresh1DaySES OBJECT-TYPE
SYNTAX GBondPm1DayIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A desired threshold for the number of Severely Errored Seconds
(SES) within any given 1-day performance data collection
interval.
If the number of SESs in a particular 1-day collection interval
reaches or exceeds this value, a gBondPmTca1DaySESCrossing
notification MAY be generated if enabled by
gBondPortConfPmTcaEnable.
At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables
gBondPmTca1DaySESCrossing notification.
This object maps to the TR-159 attribute
aGroupPerfThreshold1DaySES."
REFERENCE
"[TR-159] 5.5.1.52"
::= { gBondPortPmTcaProfileEntry 6 }
gBondPortPmTcaProfileThresh1DayUAS OBJECT-TYPE
SYNTAX GBondPm1DayIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A desired threshold for the number of Unavailable Seconds (UAS)
within any given 1-day performance data collection interval.
If the number of UASs in a particular 1-day collection interval
reaches or exceeds this value, a gBondPmTca1DayUASCrossing
notification MAY be generated if enabled by
gBondPortConfPmTcaEnable.
At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables
gBondPmTca1DayUASCrossing notification.
This object maps to the TR-159 attribute
aGroupPerfThreshold1DayUAS."
REFERENCE
"[TR-159] 5.5.1.53"
::= { gBondPortPmTcaProfileEntry 7 }
gBondPortPmTcaProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object controls the creation, modification, or deletion
of the associated entry in the gBondPortPmTcaProfileTable
per the semantics of RowStatus.
If an 'active' entry is referenced via
gBondPortConfPmTcaConfProfile instance(s), the entry MUST
remain 'active'.
An 'active' entry SHALL NOT be modified. In order to modify an
existing entry, it MUST be taken out of service (by setting
this object to 'notInService'), modified, and set 'active'
again."
::= { gBondPortPmTcaProfileEntry 8 }
-- The BCE group
gBondBceConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondBceConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for Configuration of G.Bond common aspects for the
Bonding Channel Entity (BCE) ports (modems/channels).
Entries in this table MUST be maintained in a persistent
manner."
::= { gBondBce 1 }
gBondBceConfEntry OBJECT-TYPE
SYNTAX GBondBceConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the G.Bond BCE Configuration table.
Each entry represents common aspects of a G.Bond BCE port
indexed by the ifIndex. Note that a G.Bond BCE port can be
stacked below a single GBS port, also indexed by ifIndex,
possibly together with other BCE ports if GAF is enabled."
INDEX { ifIndex }
::= { gBondBceConfTable 1 }
GBondBceConfEntry ::=
SEQUENCE {
gBondBceConfRemoteDiscoveryCode PhysAddress
}
gBondBceConfRemoteDiscoveryCode OBJECT-TYPE
SYNTAX PhysAddress (SIZE(0|6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Remote Discovery Code of the BCE port at CO.
A 6 octet long Discovery Code of the peer GBS connected via
the BCE.
Reading this object results in a Discovery Get operation.
Setting this object to all zeroes results in a Discovery
Clear_if_Same operation (the value of gBondPortConfDiscoveryCode
at the peer GBS SHALL be the same as gBondPortConfDiscoveryCode
of the local GBS associated with the BCE for the operation to
succeed).
Writing a non-zero value to this object results in a
Discovery Set_if_Clear operation.
A zero-length octet string SHALL be returned on an attempt to
read this object when GAF aggregation is not enabled.
This object is irrelevant in BCE-R port subtypes (CPE side):
in this case a zero length octet string SHALL be returned on
an attempt to read this object, an attempt to change this object
MUST be rejected (in case of SNMP with the error
inconsistentValue).
Discovery MUST be performed when the link is Down.
Attempts to change this object MUST be rejected (in case of
SNMP with the error inconsistentValue), If the link is Up or
Initializing.
This object maps to the TR-159 attribute
aLineRemoteDiscoveryCode."
REFERENCE
"[TR-159] 5.5.6.7"
::= { gBondBceConfEntry 1 }
--
-- Conformance Statements
--
gBondGroups OBJECT IDENTIFIER ::= { gBondConformance 1 }
gBondCompliances OBJECT IDENTIFIER ::= { gBondConformance 2 }
-- Object Groups
gBondBasicGroup OBJECT-GROUP
OBJECTS {
gBondPortStatOperScheme,
gBondPortStatUpDataRate,
gBondPortStatDnDataRate,
gBondPortConfTargetUpDataRate,
gBondPortConfTargetDnDataRate,
gBondPortCapSchemesSupported,
gBondPortCapCapacity,
gBondPortStatNumBCEs,
gBondPortStatSide,
gBondPortStatFltStatus
}
STATUS current
DESCRIPTION
"A collection of objects representing management information
common to all types of G.Bond ports."
::= { gBondGroups 1 }
gBondDiscoveryGroup OBJECT-GROUP
OBJECTS {
gBondPortStatPeerOperScheme,
gBondPortCapPeerSchemesSupported,
gBondPortCapPeerCapacity,
gBondPortConfDiscoveryCode,
gBondBceConfRemoteDiscoveryCode
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL G.Bond discovery
in G.Bond ports."
::= { gBondGroups 2 }
gBondMultiSchemeGroup OBJECT-GROUP
OBJECTS {
gBondPortConfAdminScheme,
gBondPortConfPeerAdminScheme
}
STATUS current
DESCRIPTION
"A collection of objects providing OPTIONAL management
information for G.Bond ports supporting multiple bonding
schemes."
::= { gBondGroups 3 }
gBondTcaConfGroup OBJECT-GROUP
OBJECTS {
gBondPortConfThreshLowUpRate,
gBondPortConfThreshLowDnRate,
gBondPortConfLowRateCrossingEnable
}
STATUS current
DESCRIPTION
"A collection of objects required for configuration of alarm
thresholds and notifications in G.Bond ports."
::= { gBondGroups 4 }
gBondTcaNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
gBondLowUpRateCrossing,
gBondLowDnRateCrossing
}
STATUS current
DESCRIPTION
"This group supports notifications of significant conditions
(non-PM threshold crossing alerts) associated with G.Bond ports."
::= { gBondGroups 5 }
gBondPmCurGroup OBJECT-GROUP
OBJECTS {
gBondPortPmCurES,
gBondPortPmCurSES,
gBondPortPmCurUAS,
gBondPortPmCur15MinValidIntervals,
gBondPortPmCur15MinInvalidIntervals,
gBondPortPmCur15MinTimeElapsed,
gBondPortPmCur15MinES,
gBondPortPmCur15MinSES,
gBondPortPmCur15MinUAS,
gBondPortPmCur1DayValidIntervals,
gBondPortPmCur1DayInvalidIntervals,
gBondPortPmCur1DayTimeElapsed,
gBondPortPmCur1DayES,
gBondPortPmCur1DaySES,
gBondPortPmCur1DayUAS
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL current Performance
Monitoring information for G.Bond ports."
::= { gBondGroups 6 }
gBondPm15MinGroup OBJECT-GROUP
OBJECTS {
gBondPortPm15MinIntervalMoniTime,
gBondPortPm15MinIntervalES,
gBondPortPm15MinIntervalSES,
gBondPortPm15MinIntervalUAS,
gBondPortPm15MinIntervalValid
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond ports, during
previous 15-minute intervals ."
::= { gBondGroups 7 }
gBondPm1DayGroup OBJECT-GROUP
OBJECTS {
gBondPortPm1DayIntervalMoniTime,
gBondPortPm1DayIntervalES,
gBondPortPm1DayIntervalSES,
gBondPortPm1DayIntervalUAS,
gBondPortPm1DayIntervalValid
}
STATUS current
DESCRIPTION
"A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond ports, during
previous 1-day intervals ."
::= { gBondGroups 8 }
gBondPmTcaConfGroup OBJECT-GROUP
OBJECTS {
gBondPortConfPmTcaConfProfile,
gBondPortConfPmTcaEnable,
gBondPortPmTcaProfileThresh15MinES,
gBondPortPmTcaProfileThresh15MinSES,
gBondPortPmTcaProfileThresh15MinUAS,
gBondPortPmTcaProfileThresh1DayES,
gBondPortPmTcaProfileThresh1DaySES,
gBondPortPmTcaProfileThresh1DayUAS,
gBondPortPmTcaProfileRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects required for configuration of
Performance Monitoring Threshold Crossing Alert notifications
in G.Bond ports."
::= { gBondGroups 9 }
gBondPmTcaNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
gBondPmTca15MinESCrossing,
gBondPmTca15MinSESCrossing,
gBondPmTca15MinUASCrossing,
gBondPmTca1DayESCrossing,
gBondPmTca1DaySESCrossing,
gBondPmTca1DayUASCrossing
}
STATUS current
DESCRIPTION
"This group supports notifications of performance monitoring
thresholds crossing alerts associated with G.Bond ports."
::= { gBondGroups 10 }
-- Compliance Statements
gBondCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for G.Bond interfaces.
Compliance with the following external compliance statements
is REQUIRED:
MIB Module Compliance Statement
---------- --------------------
IF-MIB ifCompliance3
Compliance with the following external compliance statements
is OPTIONAL for implementations supporting bonding with
flexible cross-connect between the GBS and BCE ports:
MIB Module Compliance Statement
---------- --------------------
IF-INVERTED-STACK-MIB ifInvCompliance
IF-CAP-STACK-MIB ifCapStackCompliance"
MODULE -- this module
MANDATORY-GROUPS {
gBondBasicGroup,
gBondTcaConfGroup,
gBondTcaNotificationGroup
}
GROUP gBondDiscoveryGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting G.Bond Discovery function."
GROUP gBondMultiSchemeGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting multiple bonding schemes."
GROUP gBondPmCurGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting Performance Monitoring."
GROUP gBondPm15MinGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting 15-min historical Performance Monitoring."
GROUP gBondPm1DayGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting 1-day historical Performance Monitoring."
GROUP gBondPmTcaConfGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting Performance Monitoring Threshold Crossing Alert
notifications."
GROUP gBondPmTcaNotificationGroup
DESCRIPTION
"Support for this group is only required for implementations
supporting Performance Monitoring Threshold Crossing Alert
notifications."
OBJECT gBondPortCapSchemesSupported
SYNTAX GBondSchemeList
DESCRIPTION
"Support for all bonding Schemes types is not required.
However at least one value SHALL be supported"
OBJECT gBondPortCapPeerSchemesSupported
SYNTAX GBondSchemeList
DESCRIPTION
"Support for all bonding Schemes types is not required.
However at least one value SHALL be supported"
::= { gBondCompliances 1 }
END