mibs/MIBS/IEEE-802DOT17-RPR-MIB

6859 lines
235 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- IEEE-802DOT17-RPR-MIB.my : IEEE 802.17 MIB file
--
-- June 2004
--
-- Copyright (c) 2004 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
-- This mib was extracted from IEEE 802.17 standard
IEEE-802DOT17-RPR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32,
Counter64, Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
MacAddress, TimeStamp,TEXTUAL-CONVENTION, TruthValue, DateAndTime
FROM SNMPv2-TC
InterfaceIndex, InterfaceIndexOrZero
FROM IF-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
HCPerfTotalCount, HCPerfIntervalCount, HCPerfCurrentCount
FROM HC-PerfHist-TC-MIB
;
ieee802dot17rprMIB MODULE-IDENTITY
LAST-UPDATED "200404211200Z" -- 21 Apr 2004 12:00:00 UTC
ORGANIZATION "IEEE 802.17 Working Group"
CONTACT-INFO "stds-802-17@ieee.org"
DESCRIPTION
"The resilient packet ring MIB for IEEE 802.17.
Copyright (C) IEEE802.17.
This version of this MIB module is part of IEEE802.17;
see the draft itself for full legal notices."
-- Revision history
REVISION
"200404211200Z" -- 21 Apr 2004 12:00:00 UTC
DESCRIPTION
"First published version."
::= {iso std(0) iso8802(8802) ieee802dot17(17) ieee802dot17mibs(1) 1}
--
-- Textual Conventions used in this MIB
--
RprSpan ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the span interface of the RPR MAC. Each RPR
span is connected to both ringlet0 and ringlet1.
The east span receives from ringlet1 and transmits through
ringlet0.
The west span receives from ringlet0 and transmits through
ringlet1."
SYNTAX INTEGER {
east (1),
west (2)
}
RprProtectionStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the current protection status of the RPR MAC
span.
The status values are (arranged in ascending priority
order) :
noRequest
No protection request on the span, the protection
status is idle.
waitToRestore
The condition for an automatic protection was cleared and
the span is engaged in a wait to restore period.
manualSwitch
A user initiated manual switch (via the
rprSpanProtectionCommand) on the span.
signalDegraded
An automatically-detected status which causes protection on
a span when a media signal degrade is detected due to
excessive BER.
signalFailed
An automatically-detected status which causes protection on
a span when a media signal failure is detected.
forcedSwitch
A user initiated forced switch (via the
rprSpanProtectionCommand) on the span."
SYNTAX BITS {
noRequest (0),
waitToRestore (1),
manualSwitch (2),
signalDegraded (3),
signalFailed (4),
forcedSwitch (5)
}
RprOamRinglet ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the ringlet on which the OAM action
request/response is sent/replied.
The valid values for this object are:
(1) Default (2) ringlet0 (3) ringlet1 (4) Reverse ringlet.
The value (4) is applicable only for OAM response action."
SYNTAX INTEGER {
default (1),
ringlet0 (2),
ringlet1 (3),
reverseRinglet (4)
}
--
-- Object groups
--
rprObjects OBJECT IDENTIFIER ::= { ieee802dot17rprMIB 1 }
rprGeneral OBJECT IDENTIFIER ::= { rprObjects 1 }
rprProtocols OBJECT IDENTIFIER ::= { rprObjects 2 }
rprSpanCounters OBJECT IDENTIFIER ::= { rprObjects 3 }
rprClientCounters OBJECT IDENTIFIER ::= { rprObjects 4 }
rprSpanErrorCounters OBJECT IDENTIFIER ::= { rprObjects 5 }
--
-- Conformance
--
rprConformance OBJECT IDENTIFIER ::= { ieee802dot17rprMIB 2 }
--
-- RPR interface table
--
rprIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR interface table, extension to the ifTable.
All read-write attributes in this table are non-volatile,
i.e. will be retained across system reset."
::= { rprGeneral 1 }
rprIfEntry OBJECT-TYPE
SYNTAX RprIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One such entry for every interface in the ifTable which
has an ifType of RPR interface."
INDEX { rprIfIndex }
::= { rprIfTable 1 }
RprIfEntry ::= SEQUENCE {
rprIfIndex InterfaceIndex,
rprIfStationsOnRing Unsigned32,
rprIfReversionMode TruthValue,
rprIfProtectionWTR Unsigned32,
rprIfProtectionFastTimer Unsigned32,
rprIfProtectionSlowTimer Unsigned32,
rprIfAtdTimer Unsigned32,
rprIfKeepaliveTimeout Unsigned32,
rprIfFairnessAggressive TruthValue,
rprIfPtqSize Unsigned32,
rprIfStqSize Unsigned32,
rprIfSTQFullThreshold Unsigned32,
rprIfIdleThreshold Unsigned32,
rprIfSesThreshold Unsigned32,
rprIfWrapConfig TruthValue,
rprIfJumboFramePreferred TruthValue,
rprIfMacOperModes BITS,
rprIfRingOperModes BITS,
rprIfCurrentStatus BITS,
rprIfLastChange TimeStamp,
rprIfChanges Counter32
}
rprIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
REFERENCE "RFC 2863, ifIndex"
::= { rprIfEntry 1 }
rprIfStationsOnRing OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of stations on the RPR ring.
When the operStatus of the interface is down the value is 1."
REFERENCE
"IEEE 802.17 Subclause 11.2.4, numStations"
::= { rprIfEntry 2 }
rprIfReversionMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reversion mode of the MAC,
False for non-revertive
True for revertive.
Revertive station will return to idle state after
WTR interval expires.
Default value for reversion mode is true."
REFERENCE
"IEEE 802.17 Subclause 11.2.3, revertive"
DEFVAL { true }
::= { rprIfEntry 3 }
rprIfProtectionWTR OBJECT-TYPE
SYNTAX Unsigned32 (0..1440)
UNITS "Seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the length of time in seconds, to remain in the
protection state, after the cause of an automatic
protection is removed. This mechanism prevents protection
switch oscillations.
Default value for WTR is 10 seconds."
REFERENCE
"IEEE 802.17 Subclause 11.2.3, wtr"
DEFVAL { 10 }
::= { rprIfEntry 4 }
rprIfProtectionFastTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..20)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the protection messages fast timer value in 1 ms units.
The fast timer is used for protection protocols.
Default value for fast timer protection messages is 10 ms."
REFERENCE
"IEEE 802.17 Subclause 11.2.3, txFastTimeout"
DEFVAL { 10 }
::= { rprIfEntry 5 }
rprIfProtectionSlowTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..200)
UNITS "50 milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the protection slow timer value in 50 ms units.
The slow timer is used for topology and protection protocols.
Default value for slow timer protection and topology messages
is 20 units of 50 ms, i.e. 1sec."
REFERENCE
"IEEE 802.17 Subclause 11.2.3, txSlowTimeout"
DEFVAL { 20 }
::= { rprIfEntry 6 }
rprIfAtdTimer OBJECT-TYPE
SYNTAX Unsigned32 (1..200)
UNITS "50 milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the timer period for ATD message transmissions.
Default value is 20 units of 50 ms, i.e. 1sec."
REFERENCE
"IEEE 802.17 Subclause 11.2.3, atdTimerTimeout"
DEFVAL { 20 }
::= { rprIfEntry 7 }
rprIfKeepaliveTimeout OBJECT-TYPE
SYNTAX Unsigned32 (2..50)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the timer to declare keepalive timeout, multiples
of 1 millisecond.
Default value for keepalive timeout is 3 ms."
REFERENCE
"IEEE 802.17 Subclause 11.2.3, keepaliveTime"
DEFVAL { 3 }
::= { rprIfEntry 8 }
rprIfFairnessAggressive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the selected RPR fairness algorithm is
aggressive or conservative.
If true, the selected fairness mode is aggressive.
If false, the selected fairness mode is conservative.
The default value for fairness aggressive is true."
REFERENCE
"IEEE 802.17 Subclause 11.2.5, conservativeMode"
DEFVAL { true }
::= { rprIfEntry 9 }
rprIfPtqSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size in bytes of the Primary Transit Queue per ringlet
supported by this RPR MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.2, sizePtq"
::= { rprIfEntry 10 }
rprIfStqSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size in bytes of the Secondary Transit Queue per ringlet
supported by this RPR MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.2, size Stq"
::= { rprIfEntry 11 }
rprIfSTQFullThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "MTUs"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A level of STQ occupancy at or above which the STQ
is almost full.
This attribute specifies the full threshold location
in MTU units below the STQ size.
The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize].
The default value for stqFullThreshold is sizeSTQ - 2*mtuSize."
REFERENCE
"IEEE 802.17 Subclause 7.2.2, stqFullThreshold"
DEFVAL { 2 }
::= { rprIfEntry 12 }
rprIfIdleThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "MTUs"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates that a MAC is experiencing an adverse rate
mismatch. When the PTQ depth exceeds this value,
the incoming link is considered adversely rate mismatched.
This attribute specifies the idle-threshold location
from the top of the PTQ buffer, in MTU size.
Default value should be 1, which means (sizePTQ - mtuSize)"
REFERENCE
"IEEE 802.17 Subclause 7.5.3.2, idleThreshold"
DEFVAL { 1 }
::= { rprIfEntry 13 }
rprIfSesThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the number of E-RPR errors to declare
a second as SES-RPR
The default value is the rounded integer of
0.000001 * (lineRate * advertisementRatio)."
REFERENCE
"IEEE 802.17 Subclause 12.2.2, sesThreshold"
::= { rprIfEntry 14 }
rprIfWrapConfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the configured protection mode,
steering or wrapping, in a MAC that supports both modes.
If wrap configured bit is set, the station will
perform wrap protection during ring failures.
If the station detects another station on the ring that
has a protection configuration that conflicts with its own,
the station will generate a defect to higher layers.
Default value for wrap preferred is false for steering
only stations, and true for stations that implement wrapping."
REFERENCE
"IEEE 802.17 Subclause 11.2.5, protConfig"
::= { rprIfEntry 15 }
rprIfJumboFramePreferred OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the preference of the manager to support jumbo frame
in a MAC that supports jumbo frame.
The station advertises the 'logical and' of rprIfJumboFramePreferred
and jumbo capable bit in the rprIfMacCapability.
Default value for jumbo frame preferred is true. i.e. station
supports jumbo frame."
REFERENCE
"IEEE 802.17 Subclause 11.2.5, jumboPrefer"
DEFVAL { true }
::= { rprIfEntry 16 }
rprIfMacOperModes OBJECT-TYPE
SYNTAX BITS {
strictOrder (0),
dropBadFcs (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The summary of the Mac operational modes.
if strictOrder is set, the MAC operates in strict order mode.
if dropBadFcs is set, frames with bad FCS are dropped."
REFERENCE
"IEEE 802.17 Subclause 6.2, forceStrict and copyBadFcs"
::= { rprIfEntry 17 }
rprIfRingOperModes OBJECT-TYPE
SYNTAX BITS {
jumboFrames (0),
wrapProtection (1),
openRing (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The summary of the ring operational modes
collected through the topology discovery protocol.
If at least one station doesn't support jumbo frames,
the jumboFrame bit in this attribute is set to false.
Only if all stations support jumbo frames, the bit is true.
If at least one station wasn't configured to wrap,
the wrap bit in this attribute is set to false.
Only if all stations configured to wrap, the bit is true.
If the ring doesn't complete full loop, the ring is considered
openRing, with at least one detected edge."
REFERENCE
"IEEE 802.17 Subclause 11.2.4, jumboType and topoType"
::= { rprIfEntry 18 }
rprIfCurrentStatus OBJECT-TYPE
SYNTAX BITS {
neighborInconsistency (0),
duplicateMac (1),
exceedMaxStations (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current status of the RPR interface.
this attribute is used to generate alarm to the management system."
REFERENCE
"IEEE 802.17 Subclause 11.2.9, topoInconsistencyDefect, duplicateSecMacAddressDefect, and maxStationsDefect"
::= { rprIfEntry 19 }
rprIfLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time when any of the following
attributes changes:
rprIfStationsOnRing, rprIfReversionMode, rprIfProtectionWTR,
rprIfProtectionFastTimer, rprIfProtectionSlowTimer, rprIfAtdTimer,
rprIfKeepaliveTimeout, rprIfFairnessAggressive,
rprIfSTQFullThreshold, rprIfIdleThreshold,
rprIfSesThreshold, rprIfWrapConfig, rprIfJumboFramePreferred,
rprIfMacOperModes, rprIfRingOperModes, rprIfCurrentStatus
contents of the rprTopoImageEntry."
::= { rprIfEntry 20 }
rprIfChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates number of times rprIfLastChange changed.
The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value."
::= { rprIfEntry 21 }
--
-- RPR statistics management table
--
rprIfStatsControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprIfStatsControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR statistics management table,
controls the collection, duration, clearance, and status
of the MAC statistics.
The usage of this table is as follows:
1. In order to clear period of counters (or all periods) of
specific counting point (or all counting points) of the
RPR MAC, the user should first set the
rprIfStatsControlPeriodClear item to specify the period
that he would like to clear, and the
rprIfStatsControlCountPointClear item to specify the
counting point on which he would like to perform the
statistics clearance.
In case that the user specified 'clearSpecificInterval'
in the rprIfStatsControlPeriodClear item, the user should
also set the specific interval to clear by setting
rprIfStatsControlIntervalClear.
After setting these items, the user can activate the
clear operation by setting rprIfStatsControlCommitClear
item to 'commit'.
The status of the clear operation (done of failed) is
indicated by the returned value of rprIfStatsControlCommitClear
item.
2. Setting rprIfStatsControlPeriodClear to 'clearAllIntervals' and
rprIfStatsControlCountPointClear to 'clearWest' (for example)
will clear all current and previous intervals, and day
counters of the west side of the RPR MAC.
3. The IntervalValidData of cleared interval should be set to false.
All read-write attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprGeneral 2 }
rprIfStatsControlEntry OBJECT-TYPE
SYNTAX RprIfStatsControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One such entry for every interface in the ifTable which
has an ifType of RPR interface."
INDEX { rprIfStatsControlIfIndex }
::= { rprIfStatsControlTable 1 }
RprIfStatsControlEntry ::= SEQUENCE {
rprIfStatsControlIfIndex InterfaceIndex,
rprIfStatsControlPeriodClear INTEGER,
rprIfStatsControlCountPointClear INTEGER,
rprIfStatsControlIntervalClear Unsigned32,
rprIfStatsControlCommitClear INTEGER,
rprIfStatsControlTimeElapsed Unsigned32,
rprIfStatsControlValidIntervals Unsigned32
}
rprIfStatsControlIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
REFERENCE "RFC 2863, ifIndex"
::= { rprIfStatsControlEntry 1 }
rprIfStatsControlPeriodClear OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
clearAllIntervals (2),
clearCurrent (3),
clearIntervals (4),
clearSpecificInterval (5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute allows for some or all of the
interval statistics for this RPR MAC to be cleared.
It does not affect the values of the running counters
or the counter values reported through the interface MIB.
clearSpecificInterval clears the interval indicated by
rprIfStatsControlIntervalClear.
Default value for period clear is idle."
DEFVAL { idle }
::= { rprIfStatsControlEntry 2 }
rprIfStatsControlCountPointClear OBJECT-TYPE
SYNTAX INTEGER {
clearAll (1),
clearWest (2),
clearEast (3),
clearClient (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute allows for a specific counting point of the
RPR MAC or all of the RPR MAC counting points to be cleared
on rprIfStatsControlPeriodClear request.
Default value for Interface to clear is clearAll, i.e.
clear statistics of all interfaces."
DEFVAL { clearAll }
::= { rprIfStatsControlEntry 3 }
rprIfStatsControlIntervalClear OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The statistics interval number to clear.
The interval identified by 1 is the most recently completed
15 minute interval, and interval identified by N is the
interval immediately preceding the one identified by N-1.
Setting rprIfStatsControlPeriodClear to clearSpecificInterval will
clear the interval that is indicated by this object."
::= { rprIfStatsControlEntry 4 }
rprIfStatsControlCommitClear OBJECT-TYPE
SYNTAX INTEGER {
commit (1), -- write only
commitDone (2), -- read only
commitFailed (3) -- read only
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sends a commit with input parameters to specify the
Period (rprIfStatsControlPeriodClear),
count point (rprIfStatsControlCountPointClear) and
specific interval (rprIfStatsControlIntervalClear) to clear.
If the clear operation succeeds this attribute will have
the value commitDone(2) when read.
If the clear operation fails this attribute will have
the value commitFailed(3) when read."
::= { rprIfStatsControlEntry 5 }
rprIfStatsControlTimeElapsed OBJECT-TYPE
SYNTAX Unsigned32 (0..899)
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds, including partial seconds, that
have elapsed since the beginning of the current
measurement interval. If, for some reason, such as an
adjustment in the system's time-of-day clock, the current
interval exceeds the maximum value, the agent will return
the maximum value."
::= { rprIfStatsControlEntry 6 }
rprIfStatsControlValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..96)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of previous 15-minute intervals for
which data was collected.
An RPR interface must be capable of supporting at least n
intervals.
The minimum value of n is 4. The default of n is 32.
The maximum value of n is 96.
The value will be <n> unless the measurement was
(re-)started within the last (<n>*15) minutes, in which
case the value will be the number of complete 15
minute intervals for which the agent has at least
some data. In certain cases (e.g., in the case
where the agent is a proxy) it is possible that some
intervals are unavailable. In this case, this
interval is the maximum interval number for
which data is available. "
::= { rprIfStatsControlEntry 7 }
--
-- RPR span table
--
rprSpanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprSpanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR interface Span table.
All read-write attributes in this table are non-volatile,
i.e. will be retained across system reset."
::= { rprGeneral 3 }
rprSpanEntry OBJECT-TYPE
SYNTAX RprSpanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One such entry for every span of an RPR interface."
INDEX { rprSpanIfIndex,
rprSpanId }
::= { rprSpanTable 1 }
RprSpanEntry ::= SEQUENCE {
rprSpanIfIndex InterfaceIndex,
rprSpanId RprSpan,
rprSpanLowerLayerIfIndex InterfaceIndexOrZero,
rprSpanTotalRingletReservedRate Unsigned32,
rprSpanCurrentStatus BITS,
rprSpanLastChange TimeStamp,
rprSpanChanges Counter32
}
rprSpanIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
REFERENCE "RFC 2863, ifIndex"
::= { rprSpanEntry 1 }
rprSpanId OBJECT-TYPE
SYNTAX RprSpan
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the span interface of the RPR MAC. Each RPR
span is connected to both ringlet0 and ringlet1.
The east span receives from ringlet1 and transmits through
ringlet0.
The west span receives from ringlet0 and transmits through
ringlet1."
REFERENCE
"IEEE 802.17 Subclause 7.2.2, myRi"
::= { rprSpanEntry 2 }
rprSpanLowerLayerIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of interface which is below the RPR layer in this
span. A value of zero indicates an interface index that has
yet to be determined"
REFERENCE
"RFC 2863, ifIndex"
::= { rprSpanEntry 3 }
rprSpanTotalRingletReservedRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Mb/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total reserved subclassA0 bandwidth on the ringlet.
This variable is used by the fairness module
to determine the total reclaimable bandwidth."
REFERENCE
"IEEE 802.17 Subclause 11.2.4, unreservedRate"
::= { rprSpanEntry 4 }
rprSpanCurrentStatus OBJECT-TYPE
SYNTAX BITS {
keepAliveTimeout (0),
miscabling (1),
phyLinkDegrade (2),
phyLinkFail (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current status of the RPR span.
this attribute is used to generate alarm to the management system."
REFERENCE
"IEEE 802.17 Subclause 11.2.3, keepaliveTime, 11.2.9, miscablingDefect, and 8.2.3.2, LINK_STATUS"
::= { rprSpanEntry 5 }
rprSpanLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time when any of the following
attributes changes:
rprSpanCurrentStatus,
rprSpanProtectionNeighborValid, rprSpanProtectionHoldOffTimer,
rprSpanProtectionCommand, rprSpanProtectionCount."
::= { rprSpanEntry 6 }
rprSpanChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates number of times rprSpanLastChange changed.
The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value."
::= { rprSpanEntry 7 }
--
-- RPR span protection table
--
rprSpanProtectionTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprSpanProtectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR interface Span protection management table.
All read-write attributes in this table are non-volatile,
i.e. will be retained across system reset."
::= { rprGeneral 4 }
rprSpanProtectionEntry OBJECT-TYPE
SYNTAX RprSpanProtectionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One such entry for every span of an RPR interface."
INDEX { rprSpanProtectionIfIndex,
rprSpanProtectionSpan }
::= { rprSpanProtectionTable 1 }
RprSpanProtectionEntry ::= SEQUENCE {
rprSpanProtectionIfIndex InterfaceIndex,
rprSpanProtectionSpan RprSpan,
rprSpanProtectionNeighborValid TruthValue,
rprSpanProtectionHoldOffTimer Unsigned32,
rprSpanProtectionCommand INTEGER,
rprSpanProtectionCount Counter32,
rprSpanProtectionDuration Counter32,
rprSpanProtectionLastActivationTime TimeStamp
}
rprSpanProtectionIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
REFERENCE "RFC 2863, ifIndex"
::= { rprSpanProtectionEntry 1 }
rprSpanProtectionSpan OBJECT-TYPE
SYNTAX RprSpan
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Span for this entry."
REFERENCE
"IEEE 802.17 Subclause 7.2.2. myRi"
::= { rprSpanProtectionEntry 2 }
rprSpanProtectionNeighborValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the neighbor address is active or former.
true value for active, false for former"
REFERENCE
"IEEE 802.17 Subclause 11.2.5, lastNeighborMac"
::= { rprSpanProtectionEntry 3 }
rprSpanProtectionHoldOffTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..500)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The period that RPR gives to lower layer to perform
protection, before it activates its protection mechanism.
Default value of hold off timer is 0."
REFERENCE
"IEEE 802.17 Subclause 11.2.3, holdOffTimeout"
DEFVAL { 0 }
::= { rprSpanProtectionEntry 4 }
rprSpanProtectionCommand OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
manualSwitch (2),
forcedSwitch (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The protection mode requested by management for the local
station that can affect the protection status of the RPR
station, according to the set of rules describing the RPR
protection.
When read, this object returns the last command written
unless it has been preempted, or idle if no command has been
written to this interface span since initialization.
There is no pending of commands, that is if a command has
been preempted by a failure, when the failure clears the
command is not executed.
If the command cannot be executed because an equal or \
higher priority request is in effect, an error is returned.
writing idle to a span that has no pending protection
command, has no affect. An idle clears an active WTR state.
The protection commands (arranged in ascending priority
order) are:
idle
This command clears the protection for the specified
interface span.
This value should be returned by a read request when no
protection command has been written to the object.
manualSwitch
A protection command on each end of a specified span. This
command doesn't have precedence over automatic protection,
and therefore it can't preempt
an existing automatic protection request.
forcedSwitch
A command on each end of a specified span. This command has
precedence over automatic protection, and therefore it can
preempt an existing automatic protection request.
Default value of protection command is idle."
REFERENCE
"IEEE 802.17 Subclause 11.2.3, adminRequestProtection"
DEFVAL { idle }
::= { rprSpanProtectionEntry 5 }
rprSpanProtectionCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transitions from idle state to active
protection state.
The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value."
REFERENCE
"IEEE 802.17 Subclause 11.6.5.5, IndicateEdgeState()"
::= { rprSpanProtectionEntry 6 }
rprSpanProtectionDuration OBJECT-TYPE
SYNTAX Counter32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of time protection was active on the
span interface.
The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value."
REFERENCE
"IEEE 802.17 Subclause 11.6.5.5, IndicateEdgeState()"
::= { rprSpanProtectionEntry 7 }
rprSpanProtectionLastActivationTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the last protection
activation."
REFERENCE
"IEEE 802.17 Subclause 11.6.5.5, IndicateEdgeState()"
::= { rprSpanProtectionEntry 8 }
--
-- RPR topology table
--
rprTopoImageTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprTopoImageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A topology map that details the list of stations on the RPR
ringlets.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprProtocols 1 }
rprTopoImageEntry OBJECT-TYPE
SYNTAX RprTopoImageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information specific to a particular
station on the ring.
The table has at least one entry for the station itself,
this entry indicates zero hops on each ringlet."
INDEX { rprTopoImageIfIndex,
rprTopoImageMacAddress }
::= { rprTopoImageTable 1 }
RprTopoImageEntry ::= SEQUENCE {
rprTopoImageIfIndex InterfaceIndex,
rprTopoImageMacAddress MacAddress,
rprTopoImageSecMacAddress1 MacAddress,
rprTopoImageSecMacAddress2 MacAddress,
rprTopoImageStationIfIndex InterfaceIndex,
rprTopoImageStationName SnmpAdminString,
rprTopoImageInetAddressType InetAddressType,
rprTopoImageInetAddress InetAddress,
rprTopoImageCapability BITS,
rprTopoImageRinglet0Hops Integer32,
rprTopoImageRinglet0ReservedRate Unsigned32,
rprTopoImageRinglet1Hops Integer32,
rprTopoImageRinglet1ReservedRate Unsigned32,
rprTopoImageWestProtectionStatus RprProtectionStatus,
rprTopoImageWestWeight Unsigned32,
rprTopoImageEastProtectionStatus RprProtectionStatus,
rprTopoImageEastWeight Unsigned32,
rprTopoImageStatus BITS
}
rprTopoImageIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
REFERENCE "RFC 2863, ifIndex"
::= { rprTopoImageEntry 1 }
rprTopoImageMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 48-bit MAC address of the station."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, macAddress"
::= { rprTopoImageEntry 2 }
rprTopoImageSecMacAddress1 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 48-bit first secondary MAC address of the station.
Default and unused value is FF:FF:FF:FF:FF:FF"
REFERENCE
"IEEE 802.17 Subclause 11.2.6, secMac"
::= { rprTopoImageEntry 3 }
rprTopoImageSecMacAddress2 OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 48-bit second secondary MAC address of the station.
Default and unused value is FF:FF:FF:FF:FF:FF"
REFERENCE
"IEEE 802.17 Subclause 11.2.6, secMac"
::= { rprTopoImageEntry 4 }
rprTopoImageStationIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The station ifIndex."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, interfaceIndex"
::= { rprTopoImageEntry 5 }
rprTopoImageStationName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operator assigned station name."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, stationName"
::= { rprTopoImageEntry 6 }
rprTopoImageInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the address type of the station INET address
It should be set to 'unknown' if station INET address
is not known."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, managementAddressType"
::= { rprTopoImageEntry 7 }
rprTopoImageInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the value of of the station
IP (v4 or V6) address.
The format of this address is specified by the value
of the corresponding rprTopoImageInetAddressType object.
If the address type is unknown, then this object contains the
zero-length OCTET-STRING."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, managementIpAddr"
::= { rprTopoImageEntry 8 }
rprTopoImageCapability OBJECT-TYPE
SYNTAX BITS {
jumboFrames (0),
wrapProtection (1),
supportsConservativeFairness (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the capabilities that the MAC supports.
jumboFrames - Indicates whether the MAC capable of receiving,
transmitting and transiting jumbo frames.
wrapProtection - Indicates whether the MAC configured to wrap
protection.
supportsConservativeFairness - indicates the MAC supports
conservative fairness algorithm."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, jumboPrefer, protConfig, and conservativeMode"
::= { rprTopoImageEntry 9 }
rprTopoImageRinglet0Hops OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of hops to this station through ringlet0.
The self station is indicated with zero hops.
A non reachable station is indicated with -1 value."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, hops"
::= { rprTopoImageEntry 10 }
rprTopoImageRinglet0ReservedRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Mb/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of A0 traffic that this station adds on ringlet0,
in Mb/s units."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, reservedRate"
::= { rprTopoImageEntry 11 }
rprTopoImageRinglet1Hops OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of hops to this station through ringlet1.
The self station is indicated with zero hops.
A non reachable station is indicated with -1 value."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, hops"
::= { rprTopoImageEntry 12 }
rprTopoImageRinglet1ReservedRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Mb/s"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of A0 traffic that this station adds on ringlet1,
in Mb/s units."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, reservedRate"
::= { rprTopoImageEntry 13 }
rprTopoImageWestProtectionStatus OBJECT-TYPE
SYNTAX RprProtectionStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current protection status of the West span."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, spanProtState"
::= { rprTopoImageEntry 14 }
rprTopoImageWestWeight OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The weight of the station on the west span.
used for weighted fairness."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, weight"
::= { rprTopoImageEntry 15 }
rprTopoImageEastProtectionStatus OBJECT-TYPE
SYNTAX RprProtectionStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current protection status of the east span."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, spanProtState"
::= { rprTopoImageEntry 16 }
rprTopoImageEastWeight OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The weight of the station on the east span.
Used for weighted fairness."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, weight"
::= { rprTopoImageEntry 17 }
rprTopoImageStatus OBJECT-TYPE
SYNTAX BITS {
reachableRinglet0 (0),
reachableRinglet1 (1),
wrapActiveWest (2),
wrapActiveEast (3),
receivedBadFcs (4),
receivedMultichokeFairness (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the station,
the reachability of station through ringlet0 and ringlet1,
wrap active on the station spans,
events of reception frames with bad FCS,
events of reception multichoke fairness frames."
REFERENCE
"IEEE 802.17 Subclause 11.2.6, reachable, protConfig, spanProtState, badFcsUser, and multichokeUser"
::= { rprTopoImageEntry 18 }
--
-- The RPR Fairness table
--
rprFairnessTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprFairnessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of RPR Fairness per RPR span.
All read-write attributes in this table are non-volatile,
i.e. will be retained across system reset."
::= { rprProtocols 2 }
rprFairnessEntry OBJECT-TYPE
SYNTAX RprFairnessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A fairness parameters for a particular ringlet of the
an RPR interface."
INDEX { rprFairnessIfIndex,
rprFairnessRinglet }
::= { rprFairnessTable 1 }
RprFairnessEntry ::= SEQUENCE {
rprFairnessIfIndex InterfaceIndex,
rprFairnessRinglet INTEGER,
rprFairnessRingletWeight Unsigned32,
rprFairnessReservedRate Unsigned32,
rprFairnessMaxAllowed Unsigned32,
rprFairnessAgeCoef Unsigned32,
rprFairnessRampCoef Unsigned32,
rprFairnessLpCoef Unsigned32,
rprFairnessAdvertisementRatio Unsigned32,
rprFairnessMcffReportCoef Unsigned32,
rprFairnessActiveWeightsCoef Unsigned32,
rprFairnessSTQHighThreshold Unsigned32,
rprFairnessSTQMedThreshold Unsigned32,
rprFairnessSTQLowThreshold Unsigned32,
rprFairnessRateHighThreshold Unsigned32,
rprFairnessRateLowThreshold Unsigned32,
rprFairnessResetWaterMarks INTEGER,
rprFairnessSTQHighWaterMark Unsigned32,
rprFairnessSTQLowWaterMark Unsigned32,
rprFairnessLastChange TimeStamp,
rprFairnessChanges Counter32
}
rprFairnessIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
REFERENCE "RFC 2863, ifIndex"
::= { rprFairnessEntry 1 }
rprFairnessRinglet OBJECT-TYPE
SYNTAX INTEGER {
ringlet0 (1),
ringlet1 (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ringlet for which this row contains information.
ringlet0 is the transmission of the east span and the
reception of the west span,
ringlet1 is the transmission of the west span and the
reception of the east span"
REFERENCE
"IEEE 802.17 Subclause 7.2.2, myRi"
::= { rprFairnessEntry 2 }
rprFairnessRingletWeight OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Weight assigned to fairness to permit the scaling of
fair rate values among stations on the ringlet.
This allows one station to use a larger share of available
capacity than another station without violating fairness
principles.
The allowed range is [1, 255]. The default value is 1."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, localWeight"
DEFVAL { 1 }
::= { rprFairnessEntry 3 }
rprFairnessReservedRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Mb/s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of A0 traffic that this station adds that ringlet,
in Mb/s units.
Default value for A0 reserved rate is 0 Mb/s."
REFERENCE
"IEEE 802.17 Subclause 11.2.4, reservedRate"
DEFVAL { 0 }
::= { rprFairnessEntry 4 }
rprFairnessMaxAllowed OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Mb/s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum value that the station is allowed to transmit
local excess traffic to the ringlet. The default value
is the physical ring rate."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, maxAllowedRate"
::= { rprFairnessEntry 5 }
rprFairnessAgeCoef OBJECT-TYPE
SYNTAX Unsigned32 (0..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The coefficient used by the aging procedure to specify
the relative weights assigned to
(a) the change in the value of a rate-counter during
the most recent agingInterval and
(b) the value of the rate-counter at the end of the previous
agingInterval.
The value is interpreted as 2 raised to the power
specified by this attribute.
The default value is 2, giving an aging coefficient
of 2**2, or 4."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, ageCoef"
DEFVAL { 2 }
::= { rprFairnessEntry 6 }
rprFairnessRampCoef OBJECT-TYPE
SYNTAX Unsigned32 (4..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The coefficient used for ramping a rate.
The value is interpreted as 2 raised to the power
specified by this attribute.
The default value is 6, giving a low-pass coefficient
of 2**6, or 64."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, rampUpCoef"
DEFVAL { 6 }
::= { rprFairnessEntry 7 }
rprFairnessLpCoef OBJECT-TYPE
SYNTAX Unsigned32 (4..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The coefficient used by the low-pass filter procedure
to specify the relative weights applied to
(a) the increase in the rate-count value during the most
recent agingInterval and
(b) the previous low-pass filtered rate.
The former is assigned a weight of 1 and the latter a
weight of (lpCoef-1).
The value is interpreted as 2 raised to the power
specified by this attribute.
The default value is 6, giving a low-pass coefficient
of 2**6, or 64."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, lpCoef"
DEFVAL { 6 }
::= { rprFairnessEntry 8 }
rprFairnessAdvertisementRatio OBJECT-TYPE
SYNTAX Unsigned32 (1..40)
UNITS "0.00025"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ratio between the link capacity reserved for fairness
control messages and the total link capacity.
Default value of fairness advertisement ratio is 5 units
of 0.00025, i.e 0.00125."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, advertisementRatio"
DEFVAL { 5 }
::= { rprFairnessEntry 9 }
rprFairnessMcffReportCoef OBJECT-TYPE
SYNTAX Unsigned32 (8..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the number of SCFF advertisingIntervals that
elapse between the sending of successive MCFFs,
This value allows the interval between sending MCFFs
to be established as MCFF_reportingInterval =
rprFairnessMcffReportCoef * SCFF_avertisingInterval.
The default value is 10."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, reportCoef"
DEFVAL { 10 }
::= { rprFairnessEntry 10 }
rprFairnessActiveWeightsCoef OBJECT-TYPE
SYNTAX Unsigned32 (8..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the number of agingIntervals that elapse between
successive computations of activeWeights.
This value allows the interval between computations of
activeWeights to be established as
activeWeightsInterval = activeWeightsCoef * agingInterval.
The default value is 64."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, activeWeightsCoef"
DEFVAL { 64 }
::= { rprFairnessEntry 11 }
rprFairnessSTQHighThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
UNITS "Tenth of percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A level of STQ occupancy at or above which CSFE frames are no
longer admitted. Defined only for a dual transit-queue
implementation.
This attribute specifies the high threshold location
in percentage of the STQ size.
The allowed range is [2*mtuSize, stqFullThreshold -mtuSize].
The default value is 0.25*stqFullThreshold."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, stqHighThreshold"
DEFVAL { 250 }
::= { rprFairnessEntry 12 }
rprFairnessSTQMedThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
UNITS "Tenth of percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A level of buffer occupancy in a dual-queue deployment,
at or above which congestion on the outbound link is declared.
This attribute specifies the medium threshold location
in percentage of the STQ size.
The allowed range is [stqLowThreshold + mtuSize,
stqHighThreshold - mtuSize].
The default value is 0.5 * (stqHighThreshold + stqLowThreshold)."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, stqMedThreshold"
DEFVAL { 187 }
::= { rprFairnessEntry 13 }
rprFairnessSTQLowThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
UNITS "Tenth of percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A level of STQ occupancy at or above which congestion on
the outbound link is imminent.
Defined only for dual transit-queue implementations.
This attribute specifies the low threshold location
in percentage of the STQ size.
The range is [mtuSize, stqHighThreshold -mtuSize].
The default value is 0.5*stqHighThreshold."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, stqLowThreshold"
DEFVAL { 125 }
::= { rprFairnessEntry 14 }
rprFairnessRateHighThreshold OBJECT-TYPE
SYNTAX Unsigned32 (400..990)
UNITS "Tenth of percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rate at or above which congestion on the outbound link
is declared.
The range is [0.4 * unreservedRate, 0.99 * unreservedRate].
The default value is 0.95 * unreservedRate."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, rateHighThreshold"
DEFVAL { 950 }
::= { rprFairnessEntry 15 }
rprFairnessRateLowThreshold OBJECT-TYPE
SYNTAX Unsigned32 (500..990)
UNITS "Tenth of percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rate at or above which congestion on the outbound link
is imminent.
The range is [0.5 * rateHighThreshold, 0.99 * rateHighThreshold].
The default value is 0.9 * rateHighThreshold"
REFERENCE
"IEEE 802.17 Subclause 10.2.2, rateLowThreshold"
DEFVAL { 900 }
::= { rprFairnessEntry 16 }
rprFairnessResetWaterMarks OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
resetWaterMarks (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Write resetWaterMarks to this attribute to reset
the STQ water marks to the current occupancy.
Default value is idle"
DEFVAL { idle }
::= { rprFairnessEntry 17 }
rprFairnessSTQHighWaterMark OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
UNITS "Tenth of percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest level of STQ occupancy since the last reset
of this value, in percentage of the STQ size."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, stqHighWatermark"
::= { rprFairnessEntry 18 }
rprFairnessSTQLowWaterMark OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
UNITS "Tenth of percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest level of STQ occupancy since the last reset of
this value, in percentage of the STQ size."
REFERENCE
"IEEE 802.17 Subclause 10.2.2, stqLowWatermark"
::= { rprFairnessEntry 19 }
rprFairnessLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time when any of the following
attributes changes:
rprFairnessRingletWeight, rprFairnessReservedRate,
rprFairnessMaxAllowed, rprFairnessAgeCoef, rprFairnessRampCoef,
rprFairnessLpCoef, rprFairnessAdvertisementRatio,
rprFairnessSTQHighThreshold, rprFairnessSTQLowThreshold
rprFairnessResetWaterMarks."
::= { rprFairnessEntry 20 }
rprFairnessChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates number of times rprFairnessLastChange changed.
The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value."
::= { rprFairnessEntry 21 }
--
-- The RPR OAM actions table
--
rprOamTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprOamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of RPR OAM actions.
The table is designed to support a one action at a time
on an RPR interface.
All read-write attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprProtocols 3 }
rprOamEntry OBJECT-TYPE
SYNTAX RprOamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"OAM Echo and Flush control for an RPR interface"
INDEX { rprOamIfIndex }
::= { rprOamTable 1 }
RprOamEntry ::= SEQUENCE {
rprOamIfIndex InterfaceIndex,
rprOamActionType INTEGER,
rprOamDestAddress MacAddress,
rprOamRequestRinglet RprOamRinglet,
rprOamResponseRinglet RprOamRinglet,
rprOamClassOfService INTEGER,
rprOamUserData OCTET STRING,
rprOamProtected TruthValue,
rprOamRequestCount Unsigned32,
rprOamTimeout Unsigned32,
rprOamControl INTEGER,
rprOamResponseCount Unsigned32,
rprOamAvResponseTime Unsigned32,
rprOamResponseStatus INTEGER
}
rprOamIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
REFERENCE "RFC 2863, ifIndex"
::= { rprOamEntry 1 }
rprOamActionType OBJECT-TYPE
SYNTAX INTEGER {
echo (1),
flush (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of OAM action.
The valid values for this object are:
(1) echo (2) flush."
REFERENCE
"IEEE 802.17 Subclause 12.4.1, OAM_ECHO_REQ, and 12.4.3, OAM_FLUSH_REQ"
DEFVAL { echo }
::= { rprOamEntry 2 }
rprOamDestAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 48-bit MAC address of the destination station of OAM
session."
REFERENCE
"IEEE 802.17 Subclause 12.4.1 and 12.4.3, destination_address"
::= { rprOamEntry 3 }
rprOamRequestRinglet OBJECT-TYPE
SYNTAX RprOamRinglet
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ringlet ID on which the OAM request should be sent."
REFERENCE
"IEEE 802.17 Subclause 12.4.1 and 12.4.3, ringlet_id"
DEFVAL { default }
::= { rprOamEntry 4 }
rprOamResponseRinglet OBJECT-TYPE
SYNTAX RprOamRinglet
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ringlet ID on which the OAM response should be replied."
REFERENCE
"IEEE 802.17 Subclause 12.4.1, response_ringlet"
DEFVAL { default }
::= { rprOamEntry 5 }
rprOamClassOfService OBJECT-TYPE
SYNTAX INTEGER {
classA (1),
classB (2),
classC (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The class-of-service of OAM session frames"
REFERENCE
"IEEE 802.17 Subclause 12.4.1 and 12.4.3, service_class"
DEFVAL { classC }
::= { rprOamEntry 6 }
rprOamUserData OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..1024))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The operator assigned user specific data."
REFERENCE
"IEEE 802.17 Subclause 12.4.1 and 12.4.3, user_data"
DEFVAL { "" }
::= { rprOamEntry 7 }
rprOamProtected OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the OAM action should be protected.
In a wrapping ring,
If true, the WE (wrap eligible) bit of the OAM action
frame is set to 1.
Otherwise, the WE bit is set to 0.
In steering ring,
If true, in case of failure on the requested ringlet between
the source and the destination stations, the OAM action frame
will be steered to the alternative ringlet.
Otherwise, the OAM action frame will be sent through the requested
ringlet regardless of its protection state."
REFERENCE
"IEEE 802.17 Subclause 12.4.1 and 12.4.3, mac_protection"
DEFVAL { false }
::= { rprOamEntry 8 }
rprOamRequestCount OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the number of OAM requests to send.
Default value of OAM request action is 1."
DEFVAL { 1 }
::= { rprOamEntry 9 }
rprOamTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..10000)
UNITS "10usec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the timer to declare OAM action timeout,
in 10usec units.
Default value of OAM timeout is 500 units of 10usec (i.e. 5 ms)"
DEFVAL { 500 }
::= { rprOamEntry 10 }
rprOamControl OBJECT-TYPE
SYNTAX INTEGER {
idle (1),
active (2),
abort (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Control of an OAM action.
The valid values for this object are:
(1) idle (2) active (3) abort.
Default value of OAM control is idle."
DEFVAL { idle }
::= { rprOamEntry 11 }
rprOamResponseCount OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the number of OAM actions responses received."
::= { rprOamEntry 12 }
rprOamAvResponseTime OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "10usec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average response time to receive the OAM reply."
::= { rprOamEntry 13 }
rprOamResponseStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown (1),
inProcess (2),
error (3),
success (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of an OAM action.
The valid values for this object are:
(1) unknown (2) inProcess (3) error (4) success.
The action status is success if at least 90% of the responses
were received till timeout."
::= { rprOamEntry 14 }
--
-- RPR changes summary group
--
rprIfChangeSummaryObject OBJECT IDENTIFIER ::= { rprGeneral 5 }
rprIfChangeSummaryNumInterfaces OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RPR interfaces on this device."
::= { rprIfChangeSummaryObject 1 }
rprIfChangeSummaryIfLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Latest timestamp when any instance of rprIfLastChange changed."
::= { rprIfChangeSummaryObject 2 }
rprIfChangeSummaryIfChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times any instance of rprIfChanges changed.
The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value."
::= { rprIfChangeSummaryObject 3 }
rprIfChangeSummarySpanLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Latest timestamp when any instance of rprSpanLastChange changed."
::= { rprIfChangeSummaryObject 4 }
rprIfChangeSummarySpanChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times any instance of rprSpanChanges changed.
The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value."
::= { rprIfChangeSummaryObject 5 }
rprIfChangeSummaryFairnessLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Latest timestamp when any instance of rprFairnessLastChange changed."
::= { rprIfChangeSummaryObject 6 }
rprIfChangeSummaryFairnessChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times any instance of rprFairnessChanges changed.
The discontinued counter value is indicated
by the ifCounterDiscontinuityTime value."
::= { rprIfChangeSummaryObject 7 }
--
-- RPR ring interface current counters table
--
rprSpanCountersCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprSpanCountersCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR MAC Span interface current counters table.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprSpanCounters 1 }
rprSpanCountersCurrentEntry OBJECT-TYPE
SYNTAX RprSpanCountersCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Frames and octets statistics for the current interval for
the RPR MAC Span interface.
The corresponding instance of rprIfStatsControlTimeElapsed
indicates the number of seconds which have elapsed
so far in the current interval."
INDEX { rprSpanCurrentIfIndex,
rprSpanCurrentSpan }
::= { rprSpanCountersCurrentTable 1 }
RprSpanCountersCurrentEntry ::= SEQUENCE {
rprSpanCurrentIfIndex InterfaceIndex,
rprSpanCurrentSpan RprSpan,
rprSpanCurrentInUcastClassAFrames HCPerfCurrentCount,
rprSpanCurrentInUcastClassAOctets HCPerfCurrentCount,
rprSpanCurrentInUcastClassBCirFrames HCPerfCurrentCount,
rprSpanCurrentInUcastClassBCirOctets HCPerfCurrentCount,
rprSpanCurrentInUcastClassBEirFrames HCPerfCurrentCount,
rprSpanCurrentInUcastClassBEirOctets HCPerfCurrentCount,
rprSpanCurrentInUcastClassCFrames HCPerfCurrentCount,
rprSpanCurrentInUcastClassCOctets HCPerfCurrentCount,
rprSpanCurrentInMcastClassAFrames HCPerfCurrentCount,
rprSpanCurrentInMcastClassAOctets HCPerfCurrentCount,
rprSpanCurrentInMcastClassBCirFrames HCPerfCurrentCount,
rprSpanCurrentInMcastClassBCirOctets HCPerfCurrentCount,
rprSpanCurrentInMcastClassBEirFrames HCPerfCurrentCount,
rprSpanCurrentInMcastClassBEirOctets HCPerfCurrentCount,
rprSpanCurrentInMcastClassCFrames HCPerfCurrentCount,
rprSpanCurrentInMcastClassCOctets HCPerfCurrentCount,
rprSpanCurrentOutUcastClassAFrames HCPerfCurrentCount,
rprSpanCurrentOutUcastClassAOctets HCPerfCurrentCount,
rprSpanCurrentOutUcastClassBCirFrames HCPerfCurrentCount,
rprSpanCurrentOutUcastClassBCirOctets HCPerfCurrentCount,
rprSpanCurrentOutUcastClassBEirFrames HCPerfCurrentCount,
rprSpanCurrentOutUcastClassBEirOctets HCPerfCurrentCount,
rprSpanCurrentOutUcastClassCFrames HCPerfCurrentCount,
rprSpanCurrentOutUcastClassCOctets HCPerfCurrentCount,
rprSpanCurrentOutMcastClassAFrames HCPerfCurrentCount,
rprSpanCurrentOutMcastClassAOctets HCPerfCurrentCount,
rprSpanCurrentOutMcastClassBCirFrames HCPerfCurrentCount,
rprSpanCurrentOutMcastClassBCirOctets HCPerfCurrentCount,
rprSpanCurrentOutMcastClassBEirFrames HCPerfCurrentCount,
rprSpanCurrentOutMcastClassBEirOctets HCPerfCurrentCount,
rprSpanCurrentOutMcastClassCFrames HCPerfCurrentCount,
rprSpanCurrentOutMcastClassCOctets HCPerfCurrentCount
}
rprSpanCurrentIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
REFERENCE "RFC 2863, ifIndex"
::= { rprSpanCountersCurrentEntry 1 }
rprSpanCurrentSpan OBJECT-TYPE
SYNTAX RprSpan
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of the span of the interface for which this
row contains information."
::= { rprSpanCountersCurrentEntry 2 }
rprSpanCurrentInUcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA unicast frames
in the current interval."
::= { rprSpanCountersCurrentEntry 3 }
rprSpanCurrentInUcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA unicast octets,
in the current interval."
::= { rprSpanCountersCurrentEntry 4 }
rprSpanCurrentInUcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR unicast frames
in the current interval."
::= { rprSpanCountersCurrentEntry 5 }
rprSpanCurrentInUcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR unicast octets
in the current interval."
::= { rprSpanCountersCurrentEntry 6 }
rprSpanCurrentInUcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR unicast frames
in the current interval."
::= { rprSpanCountersCurrentEntry 7 }
rprSpanCurrentInUcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR unicast octets
in the current interval."
::= { rprSpanCountersCurrentEntry 8 }
rprSpanCurrentInUcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC unicast frames
in the current interval."
::= { rprSpanCountersCurrentEntry 9 }
rprSpanCurrentInUcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC unicast octets
in the current interval."
::= { rprSpanCountersCurrentEntry 10 }
rprSpanCurrentInMcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA multicast and
broadcast frames in the current interval."
::= { rprSpanCountersCurrentEntry 11 }
rprSpanCurrentInMcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA multicast and
broadcast octets in the current interval."
::= { rprSpanCountersCurrentEntry 12 }
rprSpanCurrentInMcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR multicast and
broadcast frames in the current interval."
::= { rprSpanCountersCurrentEntry 13 }
rprSpanCurrentInMcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR multicast and
broadcast octets in the current interval."
::= { rprSpanCountersCurrentEntry 14 }
rprSpanCurrentInMcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR multicast and
broadcast frames in the current interval."
::= { rprSpanCountersCurrentEntry 15 }
rprSpanCurrentInMcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR multicast and
broadcast octets in the current interval."
::= { rprSpanCountersCurrentEntry 16 }
rprSpanCurrentInMcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC multicast and
broadcast frames in the current interval."
::= { rprSpanCountersCurrentEntry 17 }
rprSpanCurrentInMcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC multicast and
broadcast octets in the current interval."
::= { rprSpanCountersCurrentEntry 18 }
rprSpanCurrentOutUcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA unicast frames
in the current interval."
::= { rprSpanCountersCurrentEntry 19 }
rprSpanCurrentOutUcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA unicast octets
in the current interval."
::= { rprSpanCountersCurrentEntry 20 }
rprSpanCurrentOutUcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR unicast frames
in the current interval."
::= { rprSpanCountersCurrentEntry 21 }
rprSpanCurrentOutUcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR unicast octets
in the current interval."
::= { rprSpanCountersCurrentEntry 22 }
rprSpanCurrentOutUcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR unicast frames
in the current interval."
::= { rprSpanCountersCurrentEntry 23 }
rprSpanCurrentOutUcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR unicast octets
in the current interval."
::= { rprSpanCountersCurrentEntry 24 }
rprSpanCurrentOutUcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC unicast frames
in the current interval."
::= { rprSpanCountersCurrentEntry 25 }
rprSpanCurrentOutUcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC unicast octets
in the current interval."
::= { rprSpanCountersCurrentEntry 26 }
rprSpanCurrentOutMcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA multicast and
broadcast frames in the current interval."
::= { rprSpanCountersCurrentEntry 27 }
rprSpanCurrentOutMcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA multicast and
broadcast octets in the current interval."
::= { rprSpanCountersCurrentEntry 28 }
rprSpanCurrentOutMcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR multicast and
broadcast frames in the current interval."
::= { rprSpanCountersCurrentEntry 29 }
rprSpanCurrentOutMcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR multicast and
broadcast octets in the current interval."
::= { rprSpanCountersCurrentEntry 30 }
rprSpanCurrentOutMcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR multicast and
broadcast frames in the current interval."
::= { rprSpanCountersCurrentEntry 31 }
rprSpanCurrentOutMcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR multicast and
broadcast octets in the current interval."
::= { rprSpanCountersCurrentEntry 32 }
rprSpanCurrentOutMcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC multicast and
broadcast frames in the current interval."
::= { rprSpanCountersCurrentEntry 33 }
rprSpanCurrentOutMcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC multicast and
broadcast octets in the current interval."
::= { rprSpanCountersCurrentEntry 34 }
--
-- RPR ring interface interval counters
--
rprSpanCountersIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprSpanCountersIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR MAC Span interface interval counters table.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprSpanCounters 2 }
rprSpanCountersIntervalEntry OBJECT-TYPE
SYNTAX RprSpanCountersIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Frames and octets statistics collected for a particular
interval for the RPR MAC Span interface of a
particular span of a particular RPR interface.
The corresponding instance of rprIfValidIntervals
indicates the number of intervals for which the set of
statistics is available."
INDEX { rprSpanIntervalIfIndex,
rprSpanIntervalSpan,
rprSpanIntervalNumber }
::= { rprSpanCountersIntervalTable 1 }
RprSpanCountersIntervalEntry ::= SEQUENCE {
rprSpanIntervalIfIndex InterfaceIndex,
rprSpanIntervalSpan RprSpan,
rprSpanIntervalNumber Unsigned32,
rprSpanIntervalValidData TruthValue,
rprSpanIntervalTimeElapsed Unsigned32,
rprSpanIntervalStartTime DateAndTime,
rprSpanIntervalInUcastClassAFrames HCPerfIntervalCount,
rprSpanIntervalInUcastClassAOctets HCPerfIntervalCount,
rprSpanIntervalInUcastClassBCirFrames HCPerfIntervalCount,
rprSpanIntervalInUcastClassBCirOctets HCPerfIntervalCount,
rprSpanIntervalInUcastClassBEirFrames HCPerfIntervalCount,
rprSpanIntervalInUcastClassBEirOctets HCPerfIntervalCount,
rprSpanIntervalInUcastClassCFrames HCPerfIntervalCount,
rprSpanIntervalInUcastClassCOctets HCPerfIntervalCount,
rprSpanIntervalInMcastClassAFrames HCPerfIntervalCount,
rprSpanIntervalInMcastClassAOctets HCPerfIntervalCount,
rprSpanIntervalInMcastClassBCirFrames HCPerfIntervalCount,
rprSpanIntervalInMcastClassBCirOctets HCPerfIntervalCount,
rprSpanIntervalInMcastClassBEirFrames HCPerfIntervalCount,
rprSpanIntervalInMcastClassBEirOctets HCPerfIntervalCount,
rprSpanIntervalInMcastClassCFrames HCPerfIntervalCount,
rprSpanIntervalInMcastClassCOctets HCPerfIntervalCount,
rprSpanIntervalOutUcastClassAFrames HCPerfIntervalCount,
rprSpanIntervalOutUcastClassAOctets HCPerfIntervalCount,
rprSpanIntervalOutUcastClassBCirFrames HCPerfIntervalCount,
rprSpanIntervalOutUcastClassBCirOctets HCPerfIntervalCount,
rprSpanIntervalOutUcastClassBEirFrames HCPerfIntervalCount,
rprSpanIntervalOutUcastClassBEirOctets HCPerfIntervalCount,
rprSpanIntervalOutUcastClassCFrames HCPerfIntervalCount,
rprSpanIntervalOutUcastClassCOctets HCPerfIntervalCount,
rprSpanIntervalOutMcastClassAFrames HCPerfIntervalCount,
rprSpanIntervalOutMcastClassAOctets HCPerfIntervalCount,
rprSpanIntervalOutMcastClassBCirFrames HCPerfIntervalCount,
rprSpanIntervalOutMcastClassBCirOctets HCPerfIntervalCount,
rprSpanIntervalOutMcastClassBEirFrames HCPerfIntervalCount,
rprSpanIntervalOutMcastClassBEirOctets HCPerfIntervalCount,
rprSpanIntervalOutMcastClassCFrames HCPerfIntervalCount,
rprSpanIntervalOutMcastClassCOctets HCPerfIntervalCount
}
rprSpanIntervalIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
::= { rprSpanCountersIntervalEntry 1 }
rprSpanIntervalSpan OBJECT-TYPE
SYNTAX RprSpan
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of the span of the interface for which this
row contains information."
::= { rprSpanCountersIntervalEntry 2 }
rprSpanIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 96, which identifies the intervals
for which the set of statistics is available. The interval
identified by 1 is the most recently completed 15 minute
interval, and interval identified by N is the interval
immediately preceding the one identified by N-1."
::= { rprSpanCountersIntervalEntry 3 }
rprSpanIntervalValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval
is valid.
It will be valid if it contains data for 900 seconds
plus or minus 10 seconds."
::= { rprSpanCountersIntervalEntry 4 }
rprSpanIntervalTimeElapsed OBJECT-TYPE
SYNTAX Unsigned32 (0..899)
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of a particular interval in seconds.
If, for some reason, such as an adjustment in the system's
time-of-day clock, the current interval exceeds the maximum
value, the agent will return the maximum value."
::= { rprSpanCountersIntervalEntry 5 }
rprSpanIntervalStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the wall clock time that this interval started."
::= { rprSpanCountersIntervalEntry 6 }
rprSpanIntervalInUcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA unicast frames
in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 7 }
rprSpanIntervalInUcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA unicast octets
in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 8 }
rprSpanIntervalInUcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR unicast frames
in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 9 }
rprSpanIntervalInUcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR unicast octets
in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 10 }
rprSpanIntervalInUcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR unicast
frames in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 11 }
rprSpanIntervalInUcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR unicast
octets in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 12 }
rprSpanIntervalInUcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC unicast
frames in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 13 }
rprSpanIntervalInUcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC unicast
octets in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 14 }
rprSpanIntervalInMcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA multicast and
broadcast frames in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 15 }
rprSpanIntervalInMcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA multicast and
broadcast octets in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 16 }
rprSpanIntervalInMcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR multicast and
broadcast frames in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 17 }
rprSpanIntervalInMcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR multicast and
broadcast octets in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 18 }
rprSpanIntervalInMcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR multicast and
broadcast frames in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 19 }
rprSpanIntervalInMcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR multicast and
broadcast octets in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 20 }
rprSpanIntervalInMcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC multicast and
broadcast frames in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 21 }
rprSpanIntervalInMcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC multicast and
broadcast octets in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 22 }
rprSpanIntervalOutUcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA unicast frames
in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 23 }
rprSpanIntervalOutUcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA unicast octets
in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 24 }
rprSpanIntervalOutUcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR unicast frames,
in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 25 }
rprSpanIntervalOutUcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR unicast octets
in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 26 }
rprSpanIntervalOutUcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR unicast frames
in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 27 }
rprSpanIntervalOutUcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR unicast octets
in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 28 }
rprSpanIntervalOutUcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC unicast frames
in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 29 }
rprSpanIntervalOutUcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC unicast octets
in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 30 }
rprSpanIntervalOutMcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA multicast and
broadcast frames in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 31 }
rprSpanIntervalOutMcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA multicast and
broadcast octets in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 32 }
rprSpanIntervalOutMcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR multicast and
broadcast frames in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 33 }
rprSpanIntervalOutMcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR multicast and
broadcast octets in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 34 }
rprSpanIntervalOutMcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR multicast and
broadcast frames in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 35 }
rprSpanIntervalOutMcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR multicast and
broadcast octets in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 36 }
rprSpanIntervalOutMcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC multicast and
broadcast frames in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 37 }
rprSpanIntervalOutMcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC multicast and
broadcast octets in a particular interval in the past 24 hours."
::= { rprSpanCountersIntervalEntry 38 }
--
-- RPR ring interface day (24 hour summaries) counters
--
rprSpanCountersDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprSpanCountersDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR Mac Span Day Table contains the cumulative sum
of the various statistics for the 24 hour period
preceding the current interval.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprSpanCounters 3 }
rprSpanCountersDayEntry OBJECT-TYPE
SYNTAX RprSpanCountersDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the RPR Span Day table."
INDEX { rprSpanDayIfIndex,
rprSpanDaySpan }
::= { rprSpanCountersDayTable 1 }
RprSpanCountersDayEntry ::= SEQUENCE {
rprSpanDayIfIndex InterfaceIndex,
rprSpanDaySpan RprSpan,
rprSpanDayInUcastClassAFrames HCPerfTotalCount,
rprSpanDayInUcastClassAOctets HCPerfTotalCount,
rprSpanDayInUcastClassBCirFrames HCPerfTotalCount,
rprSpanDayInUcastClassBCirOctets HCPerfTotalCount,
rprSpanDayInUcastClassBEirFrames HCPerfTotalCount,
rprSpanDayInUcastClassBEirOctets HCPerfTotalCount,
rprSpanDayInUcastClassCFrames HCPerfTotalCount,
rprSpanDayInUcastClassCOctets HCPerfTotalCount,
rprSpanDayInMcastClassAFrames HCPerfTotalCount,
rprSpanDayInMcastClassAOctets HCPerfTotalCount,
rprSpanDayInMcastClassBCirFrames HCPerfTotalCount,
rprSpanDayInMcastClassBCirOctets HCPerfTotalCount,
rprSpanDayInMcastClassBEirFrames HCPerfTotalCount,
rprSpanDayInMcastClassBEirOctets HCPerfTotalCount,
rprSpanDayInMcastClassCFrames HCPerfTotalCount,
rprSpanDayInMcastClassCOctets HCPerfTotalCount,
rprSpanDayOutUcastClassAFrames HCPerfTotalCount,
rprSpanDayOutUcastClassAOctets HCPerfTotalCount,
rprSpanDayOutUcastClassBCirFrames HCPerfTotalCount,
rprSpanDayOutUcastClassBCirOctets HCPerfTotalCount,
rprSpanDayOutUcastClassBEirFrames HCPerfTotalCount,
rprSpanDayOutUcastClassBEirOctets HCPerfTotalCount,
rprSpanDayOutUcastClassCFrames HCPerfTotalCount,
rprSpanDayOutUcastClassCOctets HCPerfTotalCount,
rprSpanDayOutMcastClassAFrames HCPerfTotalCount,
rprSpanDayOutMcastClassAOctets HCPerfTotalCount,
rprSpanDayOutMcastClassBCirFrames HCPerfTotalCount,
rprSpanDayOutMcastClassBCirOctets HCPerfTotalCount,
rprSpanDayOutMcastClassBEirFrames HCPerfTotalCount,
rprSpanDayOutMcastClassBEirOctets HCPerfTotalCount,
rprSpanDayOutMcastClassCFrames HCPerfTotalCount,
rprSpanDayOutMcastClassCOctets HCPerfTotalCount
}
rprSpanDayIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
::= { rprSpanCountersDayEntry 1 }
rprSpanDaySpan OBJECT-TYPE
SYNTAX RprSpan
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of the span of the interface for which this
row contains information."
::= { rprSpanCountersDayEntry 2 }
rprSpanDayInUcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA unicast frames."
::= { rprSpanCountersDayEntry 3 }
rprSpanDayInUcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA unicast octets."
::= { rprSpanCountersDayEntry 4 }
rprSpanDayInUcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR unicast frames."
::= { rprSpanCountersDayEntry 5 }
rprSpanDayInUcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR unicast octets."
::= { rprSpanCountersDayEntry 6 }
rprSpanDayInUcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR unicast frames."
::= { rprSpanCountersDayEntry 7 }
rprSpanDayInUcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR unicast octets."
::= { rprSpanCountersDayEntry 8 }
rprSpanDayInUcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC unicast frames."
::= { rprSpanCountersDayEntry 9 }
rprSpanDayInUcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC unicast octets."
::= { rprSpanCountersDayEntry 10 }
rprSpanDayInMcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA multicast
and broadcast frames"
::= { rprSpanCountersDayEntry 11 }
rprSpanDayInMcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA multicast
and broadcast octets"
::= { rprSpanCountersDayEntry 12 }
rprSpanDayInMcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR multicast
and broadcast frames"
::= { rprSpanCountersDayEntry 13 }
rprSpanDayInMcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR multicast
and broadcast octets"
::= { rprSpanCountersDayEntry 14 }
rprSpanDayInMcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR multicast
and broadcast frames"
::= { rprSpanCountersDayEntry 15 }
rprSpanDayInMcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR multicast
and broadcast octets"
::= { rprSpanCountersDayEntry 16 }
rprSpanDayInMcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC multicast
and broadcast frames"
::= { rprSpanCountersDayEntry 17 }
rprSpanDayInMcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC multicast
and broadcast octets"
::= { rprSpanCountersDayEntry 18 }
rprSpanDayOutUcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA unicast frames."
::= { rprSpanCountersDayEntry 19 }
rprSpanDayOutUcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA unicast octets."
::= { rprSpanCountersDayEntry 20 }
rprSpanDayOutUcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR unicast frames."
::= { rprSpanCountersDayEntry 21 }
rprSpanDayOutUcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR unicast octets."
::= { rprSpanCountersDayEntry 22 }
rprSpanDayOutUcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR unicast
frames"
::= { rprSpanCountersDayEntry 23 }
rprSpanDayOutUcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR unicast
octets"
::= { rprSpanCountersDayEntry 24 }
rprSpanDayOutUcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC unicast frames"
::= { rprSpanCountersDayEntry 25 }
rprSpanDayOutUcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC unicast octets"
::= { rprSpanCountersDayEntry 26 }
rprSpanDayOutMcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA multicast and broadcast
frames."
::= { rprSpanCountersDayEntry 27 }
rprSpanDayOutMcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA multicast and broadcast
octets."
::= { rprSpanCountersDayEntry 28 }
rprSpanDayOutMcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR
multicast and broadcast frames."
::= { rprSpanCountersDayEntry 29 }
rprSpanDayOutMcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR
multicast and broadcast octets."
::= { rprSpanCountersDayEntry 30 }
rprSpanDayOutMcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR
multicast and broadcast frames."
::= { rprSpanCountersDayEntry 31 }
rprSpanDayOutMcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR
multicast and broadcast octets."
::= { rprSpanCountersDayEntry 32 }
rprSpanDayOutMcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC multicast and broadcast
frames."
::= { rprSpanCountersDayEntry 33 }
rprSpanDayOutMcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC multicast and broadcast
octets."
::= { rprSpanCountersDayEntry 34 }
--
-- RPR ring interface continuously running counters
--
rprSpanCountersStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprSpanCountersStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR Mac Span interface total counters table.
The DiscontinuityTime for this table is indicated by
ifCounterDiscontinuityTime defined in ifXTable.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprSpanCounters 4 }
rprSpanCountersStatsEntry OBJECT-TYPE
SYNTAX RprSpanCountersStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the span stats table."
INDEX { rprSpanStatsIfIndex,
rprSpanStatsSpan }
::= { rprSpanCountersStatsTable 1 }
RprSpanCountersStatsEntry ::= SEQUENCE {
rprSpanStatsIfIndex InterfaceIndex,
rprSpanStatsSpan RprSpan,
rprSpanStatsInUcastClassAFrames Counter64,
rprSpanStatsInUcastClassAOctets Counter64,
rprSpanStatsInUcastClassBCirFrames Counter64,
rprSpanStatsInUcastClassBCirOctets Counter64,
rprSpanStatsInUcastClassBEirFrames Counter64,
rprSpanStatsInUcastClassBEirOctets Counter64,
rprSpanStatsInUcastClassCFrames Counter64,
rprSpanStatsInUcastClassCOctets Counter64,
rprSpanStatsInMcastClassAFrames Counter64,
rprSpanStatsInMcastClassAOctets Counter64,
rprSpanStatsInMcastClassBCirFrames Counter64,
rprSpanStatsInMcastClassBCirOctets Counter64,
rprSpanStatsInMcastClassBEirFrames Counter64,
rprSpanStatsInMcastClassBEirOctets Counter64,
rprSpanStatsInMcastClassCFrames Counter64,
rprSpanStatsInMcastClassCOctets Counter64,
rprSpanStatsInCtrlFrames Counter64,
rprSpanStatsInOamEchoFrames Counter64,
rprSpanStatsInOamFlushFrames Counter64,
rprSpanStatsInOamOrgFrames Counter64,
rprSpanStatsInTopoAtdFrames Counter64,
rprSpanStatsInTopoChkSumFrames Counter64,
rprSpanStatsInTopoTpFrames Counter64,
rprSpanStatsOutUcastClassAFrames Counter64,
rprSpanStatsOutUcastClassAOctets Counter64,
rprSpanStatsOutUcastClassBCirFrames Counter64,
rprSpanStatsOutUcastClassBCirOctets Counter64,
rprSpanStatsOutUcastClassBEirFrames Counter64,
rprSpanStatsOutUcastClassBEirOctets Counter64,
rprSpanStatsOutUcastClassCFrames Counter64,
rprSpanStatsOutUcastClassCOctets Counter64,
rprSpanStatsOutMcastClassAFrames Counter64,
rprSpanStatsOutMcastClassAOctets Counter64,
rprSpanStatsOutMcastClassBCirFrames Counter64,
rprSpanStatsOutMcastClassBCirOctets Counter64,
rprSpanStatsOutMcastClassBEirFrames Counter64,
rprSpanStatsOutMcastClassBEirOctets Counter64,
rprSpanStatsOutMcastClassCFrames Counter64,
rprSpanStatsOutMcastClassCOctets Counter64,
rprSpanStatsOutCtrlFrames Counter64,
rprSpanStatsOutOamEchoFrames Counter64,
rprSpanStatsOutOamFlushFrames Counter64,
rprSpanStatsOutOamOrgFrames Counter64,
rprSpanStatsOutTopoAtdFrames Counter64,
rprSpanStatsOutTopoChkSumFrames Counter64,
rprSpanStatsOutTopoTpFrames Counter64
}
rprSpanStatsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
::= { rprSpanCountersStatsEntry 1 }
rprSpanStatsSpan OBJECT-TYPE
SYNTAX RprSpan
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of the span of the interface for which this
row contains information."
REFERENCE
"IEEE 802.17 Subclause 7.2.2, myRi"
::= { rprSpanCountersStatsEntry 2 }
rprSpanStatsInUcastClassAFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA unicast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxUcastClassAFrames"
::= { rprSpanCountersStatsEntry 3 }
rprSpanStatsInUcastClassAOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA unicast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxUcastClassABytes"
::= { rprSpanCountersStatsEntry 4 }
rprSpanStatsInUcastClassBCirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR unicast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxUcastClassBCirFrames"
::= { rprSpanCountersStatsEntry 5 }
rprSpanStatsInUcastClassBCirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR unicast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxUcastClassBCirBytes"
::= { rprSpanCountersStatsEntry 6 }
rprSpanStatsInUcastClassBEirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR unicast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxUcastClassBEirFrames"
::= { rprSpanCountersStatsEntry 7 }
rprSpanStatsInUcastClassBEirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR unicast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxUcastClassBEirBytes"
::= { rprSpanCountersStatsEntry 8 }
rprSpanStatsInUcastClassCFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC unicast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxUcastClassCFrames"
::= { rprSpanCountersStatsEntry 9 }
rprSpanStatsInUcastClassCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC unicast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxUcastClassCBytes"
::= { rprSpanCountersStatsEntry 10 }
rprSpanStatsInMcastClassAFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA multicast and
broadcast frames"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxMcastClassAFrames"
::= { rprSpanCountersStatsEntry 11 }
rprSpanStatsInMcastClassAOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classA multicast and
broadcast octets"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxMcastClassABytes"
::= { rprSpanCountersStatsEntry 12 }
rprSpanStatsInMcastClassBCirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR multicast
and broadcast frames"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxMcastClassBCirFrames"
::= { rprSpanCountersStatsEntry 13 }
rprSpanStatsInMcastClassBCirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB CIR multicast
and broadcast octets"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxMcastClassBCirBytes"
::= { rprSpanCountersStatsEntry 14 }
rprSpanStatsInMcastClassBEirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR multicast
and broadcast frames"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxMcastClassBEirFrames"
::= { rprSpanCountersStatsEntry 15 }
rprSpanStatsInMcastClassBEirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classB EIR multicast
and broadcast octets"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxMcastClassBEirBytes"
::= { rprSpanCountersStatsEntry 16 }
rprSpanStatsInMcastClassCFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC multicast and
broadcast frames"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxMcastClassCFrames"
::= { rprSpanCountersStatsEntry 17 }
rprSpanStatsInMcastClassCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) classC multicast and
broadcast octets"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, rxMcastClassCBytes"
::= { rprSpanCountersStatsEntry 18 }
rprSpanStatsInCtrlFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) control frames
processed by this MAC.
This does not include control frames in transit,
i.e. a multicast control frame received from a ringlet
will be counted as In but not Out.
This does not include Fairness or idle frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toCtrlFrames"
::= { rprSpanCountersStatsEntry 19 }
rprSpanStatsInOamEchoFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) OAM echo
frames processed by this MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toCtrlOamEchoFrames"
::= { rprSpanCountersStatsEntry 20 }
rprSpanStatsInOamFlushFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) OAM flush
frames processed by this MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toCtrlOamFlushFrames"
::= { rprSpanCountersStatsEntry 21 }
rprSpanStatsInOamOrgFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) OAM Org
frames processed by this MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toCtrlOamOrgFrames"
::= { rprSpanCountersStatsEntry 22 }
rprSpanStatsInTopoAtdFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) Topology ATD
frames processed by this MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toCtrlTopoATDFrames"
::= { rprSpanCountersStatsEntry 23 }
rprSpanStatsInTopoChkSumFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) topology
checksum frames processed by this MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toCtrlTopoSumFrames"
::= { rprSpanCountersStatsEntry 24 }
rprSpanStatsInTopoTpFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) topology TP
frames processed by this MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toCtrlTopoTPFrames"
::= { rprSpanCountersStatsEntry 25 }
rprSpanStatsOutUcastClassAFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA unicast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txUcastClassAFrames"
::= { rprSpanCountersStatsEntry 26 }
rprSpanStatsOutUcastClassAOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA unicast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txUcastClassABytes"
::= { rprSpanCountersStatsEntry 27 }
rprSpanStatsOutUcastClassBCirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR unicast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txUcastClassBCirFrames"
::= { rprSpanCountersStatsEntry 28 }
rprSpanStatsOutUcastClassBCirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR unicast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txUcastClassBCirBytes"
::= { rprSpanCountersStatsEntry 29 }
rprSpanStatsOutUcastClassBEirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR unicast frames"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txUcastClassBEirFrames"
::= { rprSpanCountersStatsEntry 30 }
rprSpanStatsOutUcastClassBEirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR unicast octets"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txUcastClassBEirBytes"
::= { rprSpanCountersStatsEntry 31 }
rprSpanStatsOutUcastClassCFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC unicast frames"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txUcastClassCFrames"
::= { rprSpanCountersStatsEntry 32 }
rprSpanStatsOutUcastClassCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC unicast octets"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txUcastClassCBytes"
::= { rprSpanCountersStatsEntry 33 }
rprSpanStatsOutMcastClassAFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA multicast and
broadcast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txMcastClassAFrames"
::= { rprSpanCountersStatsEntry 34 }
rprSpanStatsOutMcastClassAOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classA multicast and
broadcast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txMcastClassABytes"
::= { rprSpanCountersStatsEntry 35 }
rprSpanStatsOutMcastClassBCirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR
multicast and broadcast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txMcastClassBCirFrames"
::= { rprSpanCountersStatsEntry 36 }
rprSpanStatsOutMcastClassBCirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB CIR
multicast and broadcast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txMcastClassBCirBytes"
::= { rprSpanCountersStatsEntry 37 }
rprSpanStatsOutMcastClassBEirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR
multicast and broadcast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txMcastClassBEirFrames"
::= { rprSpanCountersStatsEntry 38 }
rprSpanStatsOutMcastClassBEirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classB EIR
multicast and broadcast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txMcastClassBEirBytes"
::= { rprSpanCountersStatsEntry 39 }
rprSpanStatsOutMcastClassCFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC multicast and
broadcast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txMcastClassCFrames"
::= { rprSpanCountersStatsEntry 40 }
rprSpanStatsOutMcastClassCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) classC multicast and
broadcast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, txMcastClassCBytes"
::= { rprSpanCountersStatsEntry 41 }
rprSpanStatsOutCtrlFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) control frames
generated by this MAC.
This does not include control frames in transit,
i.e. a multicast control frame received from a ringlet
will be counted as In but not Out.
This does not include Fairness or idle frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromCtrlFrames"
::= { rprSpanCountersStatsEntry 42 }
rprSpanStatsOutOamEchoFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) OAM echo
frames generated by this MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromCtrlOamEchoFrames"
::= { rprSpanCountersStatsEntry 43 }
rprSpanStatsOutOamFlushFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) OAM flush
frames generated by this MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromCtrlOamFlushFrames"
::= { rprSpanCountersStatsEntry 44 }
rprSpanStatsOutOamOrgFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) OAM Org
frames generated by this MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromCtrlOamOrgFrames"
::= { rprSpanCountersStatsEntry 45 }
rprSpanStatsOutTopoAtdFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) topology
ATD frames generated by this MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromCtrlTopoATDFrames"
::= { rprSpanCountersStatsEntry 46 }
rprSpanStatsOutTopoChkSumFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) topology
checksum frames generated by this MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromCtrlTopoSumFrames"
::= { rprSpanCountersStatsEntry 47 }
rprSpanStatsOutTopoTpFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted (MAC to PHY) topology
TP frames generated by this MAC."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromCtrlTopoTPFrames"
::= { rprSpanCountersStatsEntry 48 }
--
-- RPR Client interface current counters table
--
rprClientCountersCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprClientCountersCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local station traffic current counters table.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprClientCounters 1 }
rprClientCountersCurrentEntry OBJECT-TYPE
SYNTAX RprClientCountersCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Frames and octets statistics for the current interval for
the local station traffic of a particular RPR client interface.
The corresponding instance of rprIfTimeElapsed indicates
the number of seconds which have elapsed so far in the
current interval."
INDEX { rprClientCurrentIfIndex }
::= { rprClientCountersCurrentTable 1 }
RprClientCountersCurrentEntry ::= SEQUENCE {
rprClientCurrentIfIndex InterfaceIndex,
rprClientCurrentInUcastClassAFrames HCPerfCurrentCount,
rprClientCurrentInUcastClassAOctets HCPerfCurrentCount,
rprClientCurrentInUcastClassBCirFrames HCPerfCurrentCount,
rprClientCurrentInUcastClassBCirOctets HCPerfCurrentCount,
rprClientCurrentInUcastClassBEirFrames HCPerfCurrentCount,
rprClientCurrentInUcastClassBEirOctets HCPerfCurrentCount,
rprClientCurrentInUcastClassCFrames HCPerfCurrentCount,
rprClientCurrentInUcastClassCOctets HCPerfCurrentCount,
rprClientCurrentInMcastClassAFrames HCPerfCurrentCount,
rprClientCurrentInMcastClassAOctets HCPerfCurrentCount,
rprClientCurrentInMcastClassBCirFrames HCPerfCurrentCount,
rprClientCurrentInMcastClassBCirOctets HCPerfCurrentCount,
rprClientCurrentInMcastClassBEirFrames HCPerfCurrentCount,
rprClientCurrentInMcastClassBEirOctets HCPerfCurrentCount,
rprClientCurrentInMcastClassCFrames HCPerfCurrentCount,
rprClientCurrentInMcastClassCOctets HCPerfCurrentCount,
rprClientCurrentOutUcastClassAFrames HCPerfCurrentCount,
rprClientCurrentOutUcastClassAOctets HCPerfCurrentCount,
rprClientCurrentOutUcastClassBCirFrames HCPerfCurrentCount,
rprClientCurrentOutUcastClassBCirOctets HCPerfCurrentCount,
rprClientCurrentOutUcastClassBEirFrames HCPerfCurrentCount,
rprClientCurrentOutUcastClassBEirOctets HCPerfCurrentCount,
rprClientCurrentOutUcastClassCFrames HCPerfCurrentCount,
rprClientCurrentOutUcastClassCOctets HCPerfCurrentCount,
rprClientCurrentOutMcastClassAFrames HCPerfCurrentCount,
rprClientCurrentOutMcastClassAOctets HCPerfCurrentCount,
rprClientCurrentOutMcastClassBCirFrames HCPerfCurrentCount,
rprClientCurrentOutMcastClassBCirOctets HCPerfCurrentCount,
rprClientCurrentOutMcastClassBEirFrames HCPerfCurrentCount,
rprClientCurrentOutMcastClassBEirOctets HCPerfCurrentCount,
rprClientCurrentOutMcastClassCFrames HCPerfCurrentCount,
rprClientCurrentOutMcastClassCOctets HCPerfCurrentCount
}
rprClientCurrentIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
REFERENCE "RFC 2863, ifIndex"
::= { rprClientCountersCurrentEntry 1 }
rprClientCurrentInUcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA unicast frames in
the current interval."
::= { rprClientCountersCurrentEntry 2 }
rprClientCurrentInUcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA unicast octets in
the current interval."
::= { rprClientCountersCurrentEntry 3 }
rprClientCurrentInUcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR unicast frames in
the current interval."
::= { rprClientCountersCurrentEntry 4 }
rprClientCurrentInUcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR unicast octets
in the current interval."
::= { rprClientCountersCurrentEntry 5 }
rprClientCurrentInUcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR unicast
frames in the current interval."
::= { rprClientCountersCurrentEntry 6 }
rprClientCurrentInUcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR unicast
octets in the current interval."
::= { rprClientCountersCurrentEntry 7 }
rprClientCurrentInUcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC unicast frames in the
current interval."
::= { rprClientCountersCurrentEntry 8 }
rprClientCurrentInUcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC unicast octets in the
current interval."
::= { rprClientCountersCurrentEntry 9 }
rprClientCurrentInMcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA multicast and broadcast
frames in the current interval."
::= { rprClientCountersCurrentEntry 10 }
rprClientCurrentInMcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA multicast and broadcast
octets in the current interval."
::= { rprClientCountersCurrentEntry 11 }
rprClientCurrentInMcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR
multicast and broadcast frames in the current interval."
::= { rprClientCountersCurrentEntry 12 }
rprClientCurrentInMcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR
multicast and broadcast octets in the current interval."
::= { rprClientCountersCurrentEntry 13 }
rprClientCurrentInMcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR
multicast and broadcast frames in the current interval."
::= { rprClientCountersCurrentEntry 14 }
rprClientCurrentInMcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR
multicast and broadcast octets in the current interval."
::= { rprClientCountersCurrentEntry 15 }
rprClientCurrentInMcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC multicast and broadcast
frames in the current interval."
::= { rprClientCountersCurrentEntry 16 }
rprClientCurrentInMcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC multicast and broadcast
octets in the current interval."
::= { rprClientCountersCurrentEntry 17 }
rprClientCurrentOutUcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA unicast frames
in the current interval."
::= { rprClientCountersCurrentEntry 18 }
rprClientCurrentOutUcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA unicast octets
in the current interval."
::= { rprClientCountersCurrentEntry 19 }
rprClientCurrentOutUcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR unicast
frames in the current interval."
::= { rprClientCountersCurrentEntry 20 }
rprClientCurrentOutUcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR unicast
octets in the current interval."
::= { rprClientCountersCurrentEntry 21 }
rprClientCurrentOutUcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR unicast
frames in the current interval."
::= { rprClientCountersCurrentEntry 22 }
rprClientCurrentOutUcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR unicast
octets in the current interval."
::= { rprClientCountersCurrentEntry 23 }
rprClientCurrentOutUcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC unicast frames
in the current interval."
::= { rprClientCountersCurrentEntry 24 }
rprClientCurrentOutUcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC unicast octets
in the current interval."
::= { rprClientCountersCurrentEntry 25 }
rprClientCurrentOutMcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA multicast and broadcast
frames in the current interval."
::= { rprClientCountersCurrentEntry 26 }
rprClientCurrentOutMcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA multicast and broadcast
octets in the current interval."
::= { rprClientCountersCurrentEntry 27 }
rprClientCurrentOutMcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR
multicast and broadcast frames in the current interval."
::= { rprClientCountersCurrentEntry 28 }
rprClientCurrentOutMcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR
multicast and broadcast octets in the current interval."
::= { rprClientCountersCurrentEntry 29 }
rprClientCurrentOutMcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR
multicast and broadcast frames in the current interval."
::= { rprClientCountersCurrentEntry 30 }
rprClientCurrentOutMcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR
multicast and broadcast octets in the current interval."
::= { rprClientCountersCurrentEntry 31 }
rprClientCurrentOutMcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC multicast and broadcast
frames in the current interval."
::= { rprClientCountersCurrentEntry 32 }
rprClientCurrentOutMcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC multicast and broadcast
octets in the current interval."
::= { rprClientCountersCurrentEntry 33 }
--
-- RPR client interface interval counters table
--
rprClientCountersIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprClientCountersIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local station traffic interval counters table.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprClientCounters 2 }
rprClientCountersIntervalEntry OBJECT-TYPE
SYNTAX RprClientCountersIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Frames and octets statistics collected for a particular
interval for local station traffic of a particular RPR
interface.
The corresponding instance of rprIfValidIntervals indicates
the number of intervals for which the set of statistics is
available."
INDEX { rprClientIntervalIfIndex,
rprClientIntervalNumber }
::= { rprClientCountersIntervalTable 1 }
RprClientCountersIntervalEntry ::= SEQUENCE {
rprClientIntervalIfIndex InterfaceIndex,
rprClientIntervalNumber Unsigned32,
rprClientIntervalValidData TruthValue,
rprClientIntervalTimeElapsed Unsigned32,
rprClientIntervalInUcastClassAFrames HCPerfIntervalCount,
rprClientIntervalInUcastClassAOctets HCPerfIntervalCount,
rprClientIntervalInUcastClassBCirFrames HCPerfIntervalCount,
rprClientIntervalInUcastClassBCirOctets HCPerfIntervalCount,
rprClientIntervalInUcastClassBEirFrames HCPerfIntervalCount,
rprClientIntervalInUcastClassBEirOctets HCPerfIntervalCount,
rprClientIntervalInUcastClassCFrames HCPerfIntervalCount,
rprClientIntervalInUcastClassCOctets HCPerfIntervalCount,
rprClientIntervalInMcastClassAFrames HCPerfIntervalCount,
rprClientIntervalInMcastClassAOctets HCPerfIntervalCount,
rprClientIntervalInMcastClassBCirFrames HCPerfIntervalCount,
rprClientIntervalInMcastClassBCirOctets HCPerfIntervalCount,
rprClientIntervalInMcastClassBEirFrames HCPerfIntervalCount,
rprClientIntervalInMcastClassBEirOctets HCPerfIntervalCount,
rprClientIntervalInMcastClassCFrames HCPerfIntervalCount,
rprClientIntervalInMcastClassCOctets HCPerfIntervalCount,
rprClientIntervalOutUcastClassAFrames HCPerfIntervalCount,
rprClientIntervalOutUcastClassAOctets HCPerfIntervalCount,
rprClientIntervalOutUcastClassBCirFrames HCPerfIntervalCount,
rprClientIntervalOutUcastClassBCirOctets HCPerfIntervalCount,
rprClientIntervalOutUcastClassBEirFrames HCPerfIntervalCount,
rprClientIntervalOutUcastClassBEirOctets HCPerfIntervalCount,
rprClientIntervalOutUcastClassCFrames HCPerfIntervalCount,
rprClientIntervalOutUcastClassCOctets HCPerfIntervalCount,
rprClientIntervalOutMcastClassAFrames HCPerfIntervalCount,
rprClientIntervalOutMcastClassAOctets HCPerfIntervalCount,
rprClientIntervalOutMcastClassBCirFrames HCPerfIntervalCount,
rprClientIntervalOutMcastClassBCirOctets HCPerfIntervalCount,
rprClientIntervalOutMcastClassBEirFrames HCPerfIntervalCount,
rprClientIntervalOutMcastClassBEirOctets HCPerfIntervalCount,
rprClientIntervalOutMcastClassCFrames HCPerfIntervalCount,
rprClientIntervalOutMcastClassCOctets HCPerfIntervalCount
}
rprClientIntervalIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
::= { rprClientCountersIntervalEntry 1 }
rprClientIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 96, which identifies the interval
for which the set of statistics is available. The interval
identified by 1 is the most recently completed 15 minute
interval, and interval identified by N is the interval
immediately preceding the one identified by N-1."
::= { rprClientCountersIntervalEntry 2 }
rprClientIntervalValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval
is valid.
It will be valid if it contains data for 900 seconds
plus or minus 10 seconds."
::= { rprClientCountersIntervalEntry 3 }
rprClientIntervalTimeElapsed OBJECT-TYPE
SYNTAX Unsigned32 (0..899)
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of a particular interval in seconds.
If, for some reason, such as an adjustment in the system's
time-of-day clock, the current interval exceeds the maximum
value, the agent will return the maximum value."
::= { rprClientCountersIntervalEntry 4 }
rprClientIntervalInUcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA unicast frames
in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 5 }
rprClientIntervalInUcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA unicast octets
in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 6 }
rprClientIntervalInUcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR unicast frames
in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 7 }
rprClientIntervalInUcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR unicast octets
in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 8 }
rprClientIntervalInUcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR unicast
frames in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 9 }
rprClientIntervalInUcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR unicast
octets in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 10 }
rprClientIntervalInUcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC unicast
frames in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 11 }
rprClientIntervalInUcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC unicast
octets in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 12 }
rprClientIntervalInMcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA multicast and broadcast
frames in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 13 }
rprClientIntervalInMcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA multicast and broadcast
octets in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 14 }
rprClientIntervalInMcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR multicast and
broadcast frames in a particular interval in the past
24 hours."
::= { rprClientCountersIntervalEntry 15 }
rprClientIntervalInMcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR multicast and
broadcast octets in a particular interval in the past
24 hours."
::= { rprClientCountersIntervalEntry 16 }
rprClientIntervalInMcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR multicast and
broadcast frames in a particular interval in the past
24 hours."
::= { rprClientCountersIntervalEntry 17 }
rprClientIntervalInMcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR multicast and
broadcast octets in a particular interval in the past
24 hours."
::= { rprClientCountersIntervalEntry 18 }
rprClientIntervalInMcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC multicast and broadcast
frames in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 19 }
rprClientIntervalInMcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC multicast and broadcast
octets in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 20 }
rprClientIntervalOutUcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA unicast frames
in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 21 }
rprClientIntervalOutUcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA unicast octets
in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 22 }
rprClientIntervalOutUcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR unicast frames
in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 23 }
rprClientIntervalOutUcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR unicast octets
in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 24 }
rprClientIntervalOutUcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR unicast
frames in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 25 }
rprClientIntervalOutUcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR unicast
octets in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 26 }
rprClientIntervalOutUcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC unicast
frames in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 27 }
rprClientIntervalOutUcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC unicast
octets in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 28 }
rprClientIntervalOutMcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA multicast and broadcast
frames in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 29 }
rprClientIntervalOutMcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA multicast and broadcast
octets in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 30 }
rprClientIntervalOutMcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR multicast
and broadcast frames in a particular interval in the
past 24 hours."
::= { rprClientCountersIntervalEntry 31 }
rprClientIntervalOutMcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR multicast
and broadcast octets in a particular interval in the
past 24 hours."
::= { rprClientCountersIntervalEntry 32 }
rprClientIntervalOutMcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR multicast
and broadcast frames in a particular interval in the
past 24 hours."
::= { rprClientCountersIntervalEntry 33 }
rprClientIntervalOutMcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR multicast
and broadcast octets in a particular interval in the
past 24 hours."
::= { rprClientCountersIntervalEntry 34 }
rprClientIntervalOutMcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC multicast and broadcast
frames in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 35 }
rprClientIntervalOutMcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC multicast and broadcast
octets in a particular interval in the past 24 hours."
::= { rprClientCountersIntervalEntry 36 }
--
-- RPR client interface day (24 hour summaries) counters table
--
rprClientCountersDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprClientCountersDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR Mac Client Day Table contains the cumulative sum
of the various statistics for the 24 hour period
preceding the current interval.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprClientCounters 3 }
rprClientCountersDayEntry OBJECT-TYPE
SYNTAX RprClientCountersDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the RPR Client Day table."
INDEX { rprClientDayIfIndex }
::= { rprClientCountersDayTable 1 }
RprClientCountersDayEntry ::= SEQUENCE {
rprClientDayIfIndex InterfaceIndex,
rprClientDayInUcastClassAFrames HCPerfTotalCount,
rprClientDayInUcastClassAOctets HCPerfTotalCount,
rprClientDayInUcastClassBCirFrames HCPerfTotalCount,
rprClientDayInUcastClassBCirOctets HCPerfTotalCount,
rprClientDayInUcastClassBEirFrames HCPerfTotalCount,
rprClientDayInUcastClassBEirOctets HCPerfTotalCount,
rprClientDayInUcastClassCFrames HCPerfTotalCount,
rprClientDayInUcastClassCOctets HCPerfTotalCount,
rprClientDayInMcastClassAFrames HCPerfTotalCount,
rprClientDayInMcastClassAOctets HCPerfTotalCount,
rprClientDayInMcastClassBCirFrames HCPerfTotalCount,
rprClientDayInMcastClassBCirOctets HCPerfTotalCount,
rprClientDayInMcastClassBEirFrames HCPerfTotalCount,
rprClientDayInMcastClassBEirOctets HCPerfTotalCount,
rprClientDayInMcastClassCFrames HCPerfTotalCount,
rprClientDayInMcastClassCOctets HCPerfTotalCount,
rprClientDayOutUcastClassAFrames HCPerfTotalCount,
rprClientDayOutUcastClassAOctets HCPerfTotalCount,
rprClientDayOutUcastClassBCirFrames HCPerfTotalCount,
rprClientDayOutUcastClassBCirOctets HCPerfTotalCount,
rprClientDayOutUcastClassBEirFrames HCPerfTotalCount,
rprClientDayOutUcastClassBEirOctets HCPerfTotalCount,
rprClientDayOutUcastClassCFrames HCPerfTotalCount,
rprClientDayOutUcastClassCOctets HCPerfTotalCount,
rprClientDayOutMcastClassAFrames HCPerfTotalCount,
rprClientDayOutMcastClassAOctets HCPerfTotalCount,
rprClientDayOutMcastClassBCirFrames HCPerfTotalCount,
rprClientDayOutMcastClassBCirOctets HCPerfTotalCount,
rprClientDayOutMcastClassBEirFrames HCPerfTotalCount,
rprClientDayOutMcastClassBEirOctets HCPerfTotalCount,
rprClientDayOutMcastClassCFrames HCPerfTotalCount,
rprClientDayOutMcastClassCOctets HCPerfTotalCount
}
rprClientDayIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
::= { rprClientCountersDayEntry 1 }
rprClientDayInUcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA unicast frames."
::= { rprClientCountersDayEntry 2 }
rprClientDayInUcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA unicast octets."
::= { rprClientCountersDayEntry 3 }
rprClientDayInUcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR unicast frames."
::= { rprClientCountersDayEntry 4 }
rprClientDayInUcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR unicast octets."
::= { rprClientCountersDayEntry 5 }
rprClientDayInUcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR unicast frames."
::= { rprClientCountersDayEntry 6 }
rprClientDayInUcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR unicast octets."
::= { rprClientCountersDayEntry 7 }
rprClientDayInUcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC unicast frames."
::= { rprClientCountersDayEntry 8 }
rprClientDayInUcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC unicast octets."
::= { rprClientCountersDayEntry 9 }
rprClientDayInMcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA multicast and broadcast frames"
::= { rprClientCountersDayEntry 10 }
rprClientDayInMcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA multicast and broadcast octets"
::= { rprClientCountersDayEntry 11 }
rprClientDayInMcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR multicast
and broadcast frames"
::= { rprClientCountersDayEntry 12 }
rprClientDayInMcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR multicast
and broadcast octets"
::= { rprClientCountersDayEntry 13 }
rprClientDayInMcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR multicast
and broadcast frames"
::= { rprClientCountersDayEntry 14 }
rprClientDayInMcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR multicast
and broadcast octets"
::= { rprClientCountersDayEntry 15 }
rprClientDayInMcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC multicast and broadcast frames"
::= { rprClientCountersDayEntry 16 }
rprClientDayInMcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC multicast and broadcast octets"
::= { rprClientCountersDayEntry 17 }
rprClientDayOutUcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA unicast frames."
::= { rprClientCountersDayEntry 18 }
rprClientDayOutUcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA unicast octets."
::= { rprClientCountersDayEntry 19 }
rprClientDayOutUcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR unicast frames."
::= { rprClientCountersDayEntry 20 }
rprClientDayOutUcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR unicast octets."
::= { rprClientCountersDayEntry 21 }
rprClientDayOutUcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR unicast
frames"
::= { rprClientCountersDayEntry 22 }
rprClientDayOutUcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR unicast
octets"
::= { rprClientCountersDayEntry 23 }
rprClientDayOutUcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC unicast frames"
::= { rprClientCountersDayEntry 24 }
rprClientDayOutUcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC unicast octets"
::= { rprClientCountersDayEntry 25 }
rprClientDayOutMcastClassAFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA multicast and broadcast
frames."
::= { rprClientCountersDayEntry 26 }
rprClientDayOutMcastClassAOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA multicast and broadcast
octets."
::= { rprClientCountersDayEntry 27 }
rprClientDayOutMcastClassBCirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR
multicast and broadcast frames."
::= { rprClientCountersDayEntry 28 }
rprClientDayOutMcastClassBCirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR
multicast and broadcast octets."
::= { rprClientCountersDayEntry 29 }
rprClientDayOutMcastClassBEirFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR
multicast and broadcast frames."
::= { rprClientCountersDayEntry 30 }
rprClientDayOutMcastClassBEirOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR
multicast and broadcast octets."
::= { rprClientCountersDayEntry 31 }
rprClientDayOutMcastClassCFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC multicast and broadcast
frames."
::= { rprClientCountersDayEntry 32 }
rprClientDayOutMcastClassCOctets OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC multicast and broadcast
octets."
::= { rprClientCountersDayEntry 33 }
--
-- RPR client interface continuously running counters table
--
rprClientCountersStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprClientCountersStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local station traffic total counters table.
The DiscontinuityTime for this table is indicated by
ifCounterDiscontinuityTime defined in ifXTable.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprClientCounters 4 }
rprClientCountersStatsEntry OBJECT-TYPE
SYNTAX RprClientCountersStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the span stats table."
INDEX { rprClientStatsIfIndex }
::= { rprClientCountersStatsTable 1 }
RprClientCountersStatsEntry ::= SEQUENCE {
rprClientStatsIfIndex InterfaceIndex,
rprClientStatsInUcastClassAFrames Counter64,
rprClientStatsInUcastClassAOctets Counter64,
rprClientStatsInUcastClassBCirFrames Counter64,
rprClientStatsInUcastClassBCirOctets Counter64,
rprClientStatsInUcastClassBEirFrames Counter64,
rprClientStatsInUcastClassBEirOctets Counter64,
rprClientStatsInUcastClassCFrames Counter64,
rprClientStatsInUcastClassCOctets Counter64,
rprClientStatsInMcastClassAFrames Counter64,
rprClientStatsInMcastClassAOctets Counter64,
rprClientStatsInMcastClassBCirFrames Counter64,
rprClientStatsInMcastClassBCirOctets Counter64,
rprClientStatsInMcastClassBEirFrames Counter64,
rprClientStatsInMcastClassBEirOctets Counter64,
rprClientStatsInMcastClassCFrames Counter64,
rprClientStatsInMcastClassCOctets Counter64,
rprClientStatsInBcastFrames Counter64,
rprClientStatsOutUcastClassAFrames Counter64,
rprClientStatsOutUcastClassAOctets Counter64,
rprClientStatsOutUcastClassBCirFrames Counter64,
rprClientStatsOutUcastClassBCirOctets Counter64,
rprClientStatsOutUcastClassBEirFrames Counter64,
rprClientStatsOutUcastClassBEirOctets Counter64,
rprClientStatsOutUcastClassCFrames Counter64,
rprClientStatsOutUcastClassCOctets Counter64,
rprClientStatsOutMcastClassAFrames Counter64,
rprClientStatsOutMcastClassAOctets Counter64,
rprClientStatsOutMcastClassBCirFrames Counter64,
rprClientStatsOutMcastClassBCirOctets Counter64,
rprClientStatsOutMcastClassBEirFrames Counter64,
rprClientStatsOutMcastClassBEirOctets Counter64,
rprClientStatsOutMcastClassCFrames Counter64,
rprClientStatsOutMcastClassCOctets Counter64,
rprClientStatsOutBcastFrames Counter64
}
rprClientStatsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
::= { rprClientCountersStatsEntry 1 }
rprClientStatsInUcastClassAFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA unicast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientUcastClassAFrames"
::= { rprClientCountersStatsEntry 2 }
rprClientStatsInUcastClassAOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA unicast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientUcastClassABytes"
::= { rprClientCountersStatsEntry 3 }
rprClientStatsInUcastClassBCirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR unicast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientUcastClassBCirAFrames"
::= { rprClientCountersStatsEntry 4 }
rprClientStatsInUcastClassBCirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR unicast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientUcastClassBCirBytes"
::= { rprClientCountersStatsEntry 5 }
rprClientStatsInUcastClassBEirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR unicast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientUcastClassBEirFrames"
::= { rprClientCountersStatsEntry 6 }
rprClientStatsInUcastClassBEirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR unicast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientUcastClassBEirBytes"
::= { rprClientCountersStatsEntry 7 }
rprClientStatsInUcastClassCFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC unicast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientUcastClassCFrames"
::= { rprClientCountersStatsEntry 8 }
rprClientStatsInUcastClassCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC unicast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientUcastClassCBytes"
::= { rprClientCountersStatsEntry 9 }
rprClientStatsInMcastClassAFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA multicast and broadcast frames"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientMcastClassAFrames"
::= { rprClientCountersStatsEntry 10 }
rprClientStatsInMcastClassAOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classA multicast and broadcast octets"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientMcastClassABytes"
::= { rprClientCountersStatsEntry 11 }
rprClientStatsInMcastClassBCirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR multicast
and broadcast frames"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientMcastClassBCirFrames"
::= { rprClientCountersStatsEntry 12 }
rprClientStatsInMcastClassBCirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB CIR multicast
and broadcast octets"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientMcastClassBCirBytes"
::= { rprClientCountersStatsEntry 13 }
rprClientStatsInMcastClassBEirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR multicast
and broadcast frames"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientMcastClassBEirFrames"
::= { rprClientCountersStatsEntry 14 }
rprClientStatsInMcastClassBEirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classB EIR multicast
and broadcast octets"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientMcastClassBEirBytes"
::= { rprClientCountersStatsEntry 15 }
rprClientStatsInMcastClassCFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC multicast and broadcast frames"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientMcastClassCFrames"
::= { rprClientCountersStatsEntry 16 }
rprClientStatsInMcastClassCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client classC multicast and broadcast octets"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientMcastClassCBytes"
::= { rprClientCountersStatsEntry 17 }
rprClientStatsInBcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MAC to client broadcast frames.
This is used only when deriving the multicast
and broadcast packet counters for the interface MIB."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, toClientBcastFrames"
::= { rprClientCountersStatsEntry 18 }
rprClientStatsOutUcastClassAFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA unicast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientUcastClassAFrames"
::= { rprClientCountersStatsEntry 19 }
rprClientStatsOutUcastClassAOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA unicast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientUcastClassABytes"
::= { rprClientCountersStatsEntry 20 }
rprClientStatsOutUcastClassBCirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR unicast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientUcastClassBCirFrames"
::= { rprClientCountersStatsEntry 21 }
rprClientStatsOutUcastClassBCirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR unicast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientUcastClassBCirBytes"
::= { rprClientCountersStatsEntry 22 }
rprClientStatsOutUcastClassBEirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR unicast
frames"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientUcastClassBEirFrames"
::= { rprClientCountersStatsEntry 23 }
rprClientStatsOutUcastClassBEirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR unicast
octets"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientUcastClassBEirBytes"
::= { rprClientCountersStatsEntry 24 }
rprClientStatsOutUcastClassCFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC unicast frames"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientUcastClassCFrames"
::= { rprClientCountersStatsEntry 25 }
rprClientStatsOutUcastClassCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC unicast octets"
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientUcastClassCBytes"
::= { rprClientCountersStatsEntry 26 }
rprClientStatsOutMcastClassAFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA multicast and broadcast
frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientMcastClassAFrames"
::= { rprClientCountersStatsEntry 27 }
rprClientStatsOutMcastClassAOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classA multicast and broadcast
octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientMcastClassABytes"
::= { rprClientCountersStatsEntry 28 }
rprClientStatsOutMcastClassBCirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR
multicast and broadcast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientMcastClassBCirFrames"
::= { rprClientCountersStatsEntry 29 }
rprClientStatsOutMcastClassBCirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB CIR
multicast and broadcast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientMcastClassBCirBytes"
::= { rprClientCountersStatsEntry 30 }
rprClientStatsOutMcastClassBEirFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR
multicast and broadcast frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientMcastClassBEirFrames"
::= { rprClientCountersStatsEntry 31 }
rprClientStatsOutMcastClassBEirOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classB EIR
multicast and broadcast octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientMcastClassBEirBytes"
::= { rprClientCountersStatsEntry 32 }
rprClientStatsOutMcastClassCFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC multicast and broadcast
frames."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientMcastClassCFrames"
::= { rprClientCountersStatsEntry 33 }
rprClientStatsOutMcastClassCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC classC multicast and broadcast
octets."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientMcastClassCBytes"
::= { rprClientCountersStatsEntry 34 }
rprClientStatsOutBcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of client to MAC broadcast frames.
This is used only when deriving the multicast
and broadcast packet counters for the interface MIB."
REFERENCE
"IEEE 802.17 Subclause 7.2.5, fromClientBcastFrames"
::= { rprClientCountersStatsEntry 35 }
--
-- RPR error current counters
--
rprSpanErrorCountersCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprSpanErrorCountersCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR Errors Current counters table.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprSpanErrorCounters 1 }
rprSpanErrorCountersCurrentEntry OBJECT-TYPE
SYNTAX RprSpanErrorCountersCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Errors statistics for the current interval of a particular
span of a particular RPR interface.
The corresponding instance of rprIfTimeElapsed indicates
the number of seconds which have elapsed so far in the
current interval."
INDEX { rprSpanErrorCurrentIfIndex,
rprSpanErrorCurrentSpan }
::= { rprSpanErrorCountersCurrentTable 1 }
RprSpanErrorCountersCurrentEntry ::= SEQUENCE {
rprSpanErrorCurrentIfIndex InterfaceIndex,
rprSpanErrorCurrentSpan RprSpan,
rprSpanErrorCurrentTtlExpFrames HCPerfCurrentCount,
rprSpanErrorCurrentTooLongFrames HCPerfCurrentCount,
rprSpanErrorCurrentTooShortFrames HCPerfCurrentCount,
rprSpanErrorCurrentBadHecFrames HCPerfCurrentCount,
rprSpanErrorCurrentBadFcsFrames HCPerfCurrentCount,
rprSpanErrorCurrentSelfSrcUcastFrames HCPerfCurrentCount,
rprSpanErrorCurrentPmdAbortFrames HCPerfCurrentCount,
rprSpanErrorCurrentBadAddrFrames HCPerfCurrentCount,
rprSpanErrorCurrentBadParityFrames HCPerfCurrentCount,
rprSpanErrorCurrentContainedFrames HCPerfCurrentCount,
rprSpanErrorCurrentScffErrors HCPerfCurrentCount,
rprSpanErrorCurrentErroredSeconds HCPerfCurrentCount,
rprSpanErrorCurrentSeverelyErroredSeconds HCPerfCurrentCount,
rprSpanErrorCurrentUnavailableSeconds HCPerfCurrentCount
}
rprSpanErrorCurrentIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
REFERENCE "RFC 2863, ifIndex"
::= { rprSpanErrorCountersCurrentEntry 1 }
rprSpanErrorCurrentSpan OBJECT-TYPE
SYNTAX RprSpan
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of the span of the interface for which this
row contains information."
::= { rprSpanErrorCountersCurrentEntry 2 }
rprSpanErrorCurrentTtlExpFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) data frames that were dropped
due to zero Time To Live (TTL)."
::= { rprSpanErrorCountersCurrentEntry 3 }
rprSpanErrorCurrentTooLongFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames that exceed the
maximum permitted frame size."
::= { rprSpanErrorCountersCurrentEntry 4 }
rprSpanErrorCurrentTooShortFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames shortest than the
minimum permitted frame size."
::= { rprSpanErrorCountersCurrentEntry 5 }
rprSpanErrorCurrentBadHecFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames with HEC error."
::= { rprSpanErrorCountersCurrentEntry 6 }
rprSpanErrorCurrentBadFcsFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) data and control frames
where the fcs value did not match the expected fcs value.
This includes data frames passed to the client as a result of
rprIfMacOperModes being not set to dropBadFcs."
::= { rprSpanErrorCountersCurrentEntry 7 }
rprSpanErrorCurrentSelfSrcUcastFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) unicast frames that were
transmitted by the station itself i.e.
the source MAC is equal to the interface MAC."
::= { rprSpanErrorCountersCurrentEntry 8 }
rprSpanErrorCurrentPmdAbortFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames that were
aborted by the PMD."
::= { rprSpanErrorCountersCurrentEntry 9 }
rprSpanErrorCurrentBadAddrFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames
with invalid SA value."
::= { rprSpanErrorCountersCurrentEntry 10 }
rprSpanErrorCurrentBadParityFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames
parity value not matching the expected parity value"
::= { rprSpanErrorCountersCurrentEntry 11 }
rprSpanErrorCurrentContainedFrames OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames
that were removed due to context containment"
::= { rprSpanErrorCountersCurrentEntry 12 }
rprSpanErrorCurrentScffErrors OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) errored SCFF,
with bad parity, bad FCS, or both."
::= { rprSpanErrorCountersCurrentEntry 13 }
rprSpanErrorCurrentErroredSeconds OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of errored seconds."
::= { rprSpanErrorCountersCurrentEntry 14 }
rprSpanErrorCurrentSeverelyErroredSeconds OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of severely errored seconds."
::= { rprSpanErrorCountersCurrentEntry 15 }
rprSpanErrorCurrentUnavailableSeconds OBJECT-TYPE
SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unavailable seconds."
::= { rprSpanErrorCountersCurrentEntry 16 }
--
-- RPR error interval counters table
--
rprSpanErrorCountersIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprSpanErrorCountersIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR Errors Interval counters table.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprSpanErrorCounters 2 }
rprSpanErrorCountersIntervalEntry OBJECT-TYPE
SYNTAX RprSpanErrorCountersIntervalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Error statistics collected for a particular interval of a
particular span of a particular RPR interface.
The corresponding instance of rprIfValidIntervals indicates
the number of intervals for which the set of statistics is
available."
INDEX { rprSpanErrorIntervalIfIndex,
rprSpanErrorIntervalSpan,
rprSpanErrorIntervalNumber }
::= { rprSpanErrorCountersIntervalTable 1 }
RprSpanErrorCountersIntervalEntry ::= SEQUENCE {
rprSpanErrorIntervalIfIndex InterfaceIndex,
rprSpanErrorIntervalSpan RprSpan,
rprSpanErrorIntervalNumber Unsigned32,
rprSpanErrorIntervalValidData TruthValue,
rprSpanErrorIntervalTimeElapsed Unsigned32,
rprSpanErrorIntervalTtlExpFrames HCPerfIntervalCount,
rprSpanErrorIntervalTooLongFrames HCPerfIntervalCount,
rprSpanErrorIntervalTooShortFrames HCPerfIntervalCount,
rprSpanErrorIntervalBadHecFrames HCPerfIntervalCount,
rprSpanErrorIntervalBadFcsFrames HCPerfIntervalCount,
rprSpanErrorIntervalSelfSrcUcastFrames HCPerfIntervalCount,
rprSpanErrorIntervalPmdAbortFrames HCPerfIntervalCount,
rprSpanErrorIntervalBadAddrFrames HCPerfIntervalCount,
rprSpanErrorIntervalBadParityFrames HCPerfIntervalCount,
rprSpanErrorIntervalContainedFrames HCPerfIntervalCount,
rprSpanErrorIntervalScffErrors HCPerfIntervalCount,
rprSpanErrorIntervalErroredSeconds HCPerfIntervalCount,
rprSpanErrorIntervalSeverelyErroredSeconds HCPerfIntervalCount,
rprSpanErrorIntervalUnavailableSeconds HCPerfIntervalCount
}
rprSpanErrorIntervalIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
::= { rprSpanErrorCountersIntervalEntry 1 }
rprSpanErrorIntervalSpan OBJECT-TYPE
SYNTAX RprSpan
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of the span of the interface for which this
row contains information."
::= { rprSpanErrorCountersIntervalEntry 2 }
rprSpanErrorIntervalNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number between 1 and 96, which identifies the interval
for which the set of statistics is available. The interval
identified by 1 is the most recently completed 15 minute
interval, and interval identified by N is the interval
immediately preceding the one identified by N-1."
::= { rprSpanErrorCountersIntervalEntry 3 }
rprSpanErrorIntervalValidData OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates if the data for this interval
is valid.
It will be valid if it contains data for 900 seconds
plus or minus 10 seconds."
::= { rprSpanErrorCountersIntervalEntry 4 }
rprSpanErrorIntervalTimeElapsed OBJECT-TYPE
SYNTAX Unsigned32 (0..899)
UNITS "Seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration of a particular interval in seconds.
If, for some reason, such as an adjustment in the system's
time-of-day clock, the current interval exceeds the maximum
value, the agent will return the maximum value."
::= { rprSpanErrorCountersIntervalEntry 5 }
rprSpanErrorIntervalTtlExpFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames that were dropped due to
zero Time To Live (TTL) in a particular interval in the
past 24 hours"
::= { rprSpanErrorCountersIntervalEntry 6 }
rprSpanErrorIntervalTooLongFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames that exceed the maximum
permitted frame size in a particular interval in the
past 24 hours"
::= { rprSpanErrorCountersIntervalEntry 7 }
rprSpanErrorIntervalTooShortFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames shortest than the
minimum permitted frame size in a particular interval
in the past 24 hours."
::= { rprSpanErrorCountersIntervalEntry 8 }
rprSpanErrorIntervalBadHecFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames with HEC error in a
particular interval in the past 24 hours"
::= { rprSpanErrorCountersIntervalEntry 9 }
rprSpanErrorIntervalBadFcsFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) data and control frames
where the fcs value did not match the expected fcs value.
This includes data frames passed to the client as a result of
rprIfMacOperModes being not set to dropBadFcs."
::= { rprSpanErrorCountersIntervalEntry 10 }
rprSpanErrorIntervalSelfSrcUcastFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) unicast frames that were transmitted
by the station itself i.e. the source MAC is equal to the
interface MAC, in a particular interval in the past 24 hours"
::= { rprSpanErrorCountersIntervalEntry 11 }
rprSpanErrorIntervalPmdAbortFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) unicast frames that were aborted
by the PMD layer, in a particular interval in the past
24 hours"
::= { rprSpanErrorCountersIntervalEntry 12 }
rprSpanErrorIntervalBadAddrFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames
with invalid SA value."
::= { rprSpanErrorCountersIntervalEntry 13 }
rprSpanErrorIntervalBadParityFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames
parity value not matching the expected parity value"
::= { rprSpanErrorCountersIntervalEntry 14 }
rprSpanErrorIntervalContainedFrames OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames
that were removed due to context containment"
::= { rprSpanErrorCountersIntervalEntry 15 }
rprSpanErrorIntervalScffErrors OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) errored SCFF,
with bad parity, bad FCS, or both."
::= { rprSpanErrorCountersIntervalEntry 16 }
rprSpanErrorIntervalErroredSeconds OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of errored seconds."
::= { rprSpanErrorCountersIntervalEntry 17 }
rprSpanErrorIntervalSeverelyErroredSeconds OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of severely errored seconds."
::= { rprSpanErrorCountersIntervalEntry 18 }
rprSpanErrorIntervalUnavailableSeconds OBJECT-TYPE
SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unavailable seconds."
::= { rprSpanErrorCountersIntervalEntry 19 }
--
-- RPR error day (24 hour summaries) counters table
--
rprSpanErrorCountersDayTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprSpanErrorCountersDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR Mac Error Day Table contains the cumulative sum
of the various statistics for the 24 hour period
preceding the current interval.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprSpanErrorCounters 3 }
rprSpanErrorCountersDayEntry OBJECT-TYPE
SYNTAX RprSpanErrorCountersDayEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the RPR Error Day table."
INDEX { rprSpanErrorDayIfIndex,
rprSpanErrorDaySpan }
::= { rprSpanErrorCountersDayTable 1 }
RprSpanErrorCountersDayEntry ::= SEQUENCE {
rprSpanErrorDayIfIndex InterfaceIndex,
rprSpanErrorDaySpan RprSpan,
rprSpanErrorDayTtlExpFrames HCPerfTotalCount,
rprSpanErrorDayTooLongFrames HCPerfTotalCount,
rprSpanErrorDayTooShortFrames HCPerfTotalCount,
rprSpanErrorDayBadHecFrames HCPerfTotalCount,
rprSpanErrorDayBadFcsFrames HCPerfTotalCount,
rprSpanErrorDaySelfSrcUcastFrames HCPerfTotalCount,
rprSpanErrorDayPmdAbortFrames HCPerfTotalCount,
rprSpanErrorDayBadAddrFrames HCPerfTotalCount,
rprSpanErrorDayBadParityFrames HCPerfTotalCount,
rprSpanErrorDayContainedFrames HCPerfTotalCount,
rprSpanErrorDayScffErrors HCPerfTotalCount,
rprSpanErrorDayErroredSeconds HCPerfTotalCount,
rprSpanErrorDaySeverelyErroredSeconds HCPerfTotalCount,
rprSpanErrorDayUnavailableSeconds HCPerfTotalCount
}
rprSpanErrorDayIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
::= { rprSpanErrorCountersDayEntry 1 }
rprSpanErrorDaySpan OBJECT-TYPE
SYNTAX RprSpan
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of the span of the interface for which this
row contains information."
::= { rprSpanErrorCountersDayEntry 2 }
rprSpanErrorDayTtlExpFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames that were dropped
due to zero Time To Live (TTL)."
::= { rprSpanErrorCountersDayEntry 3 }
rprSpanErrorDayTooLongFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames that exceed the
maximum permitted frame size."
::= { rprSpanErrorCountersDayEntry 4 }
rprSpanErrorDayTooShortFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames shortest than the
minimum permitted frame size."
::= { rprSpanErrorCountersDayEntry 5 }
rprSpanErrorDayBadHecFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames with HEC error."
::= { rprSpanErrorCountersDayEntry 6 }
rprSpanErrorDayBadFcsFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) data and control frames
where the fcs value did not match the expected fcs value.
This includes data frames passed to the client as a result of
rprIfMacOperModes being not set to dropBadFcs."
::= { rprSpanErrorCountersDayEntry 7 }
rprSpanErrorDaySelfSrcUcastFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) unicast frames that were
transmitted by the station itself i.e.
the source MAC is equal to the interface MAC."
::= { rprSpanErrorCountersDayEntry 8 }
rprSpanErrorDayPmdAbortFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames that were
aborted by the PMD"
::= { rprSpanErrorCountersDayEntry 9 }
rprSpanErrorDayBadAddrFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames
with invalid SA value."
::= { rprSpanErrorCountersDayEntry 10 }
rprSpanErrorDayBadParityFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames
parity value not matching the expected parity value"
::= { rprSpanErrorCountersDayEntry 11 }
rprSpanErrorDayContainedFrames OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames
that were removed due to context containment"
::= { rprSpanErrorCountersDayEntry 12 }
rprSpanErrorDayScffErrors OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) errored SCFF,
with bad parity, bad FCS, or both."
::= { rprSpanErrorCountersDayEntry 13 }
rprSpanErrorDayErroredSeconds OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of errored seconds."
::= { rprSpanErrorCountersDayEntry 14 }
rprSpanErrorDaySeverelyErroredSeconds OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of severely errored seconds."
::= { rprSpanErrorCountersDayEntry 15 }
rprSpanErrorDayUnavailableSeconds OBJECT-TYPE
SYNTAX HCPerfTotalCount
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of unavailable seconds."
::= { rprSpanErrorCountersDayEntry 16 }
--
-- RPR error total continuously running counters table
--
rprSpanErrorCountersStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RprSpanErrorCountersStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The RPR Errors total counters table.
The DiscontinuityTime for this table is indicated by
ifCounterDiscontinuityTime defined in ifXTable.
All attributes in this table are volatile,
i.e. will be cleared on system reset."
::= { rprSpanErrorCounters 4 }
rprSpanErrorCountersStatsEntry OBJECT-TYPE
SYNTAX RprSpanErrorCountersStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the span error counter table."
INDEX { rprSpanErrorStatsIfIndex,
rprSpanErrorStatsSpan }
::= { rprSpanErrorCountersStatsTable 1 }
RprSpanErrorCountersStatsEntry ::= SEQUENCE {
rprSpanErrorStatsIfIndex InterfaceIndex,
rprSpanErrorStatsSpan RprSpan,
rprSpanErrorStatsTtlExpFrames Counter64,
rprSpanErrorStatsTooLongFrames Counter64,
rprSpanErrorStatsTooShortFrames Counter64,
rprSpanErrorStatsBadHecFrames Counter64,
rprSpanErrorStatsBadFcsFrames Counter64,
rprSpanErrorStatsSelfSrcUcastFrames Counter64,
rprSpanErrorStatsPmdAbortFrames Counter64,
rprSpanErrorStatsBadAddrFrames Counter64,
rprSpanErrorStatsBadParityFrames Counter64,
rprSpanErrorStatsContainedFrames Counter64,
rprSpanErrorStatsScffErrors Counter64
}
rprSpanErrorStatsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex of this RPR interface."
::= { rprSpanErrorCountersStatsEntry 1 }
rprSpanErrorStatsSpan OBJECT-TYPE
SYNTAX RprSpan
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An indication of the span of the interface for which this
row contains information."
REFERENCE
"IEEE 802.17 Subclause 7.2.2, myRi"
::= { rprSpanErrorCountersStatsEntry 2 }
rprSpanErrorStatsTtlExpFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames that were dropped
due to zero Time To Live (TTL)."
REFERENCE
"IEEE 802.17 Subclause 7.6.3.6.2, ttlExpiredFrames"
::= { rprSpanErrorCountersStatsEntry 3 }
rprSpanErrorStatsTooLongFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames that exceed the
maximum permitted frame size."
REFERENCE
"IEEE 802.17 Subclause 7.6.3.6.2, tooLongFrames"
::= { rprSpanErrorCountersStatsEntry 4 }
rprSpanErrorStatsTooShortFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames shortest than the
minimum permitted frame size."
REFERENCE
"IEEE 802.17 Subclause 7.6.3.6.2, tooShortFrames"
::= { rprSpanErrorCountersStatsEntry 5 }
rprSpanErrorStatsBadHecFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames with HEC error."
REFERENCE
"IEEE 802.17 Subclause 7.6.3.6.2, badHecFrames"
::= { rprSpanErrorCountersStatsEntry 6 }
rprSpanErrorStatsBadFcsFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) data and control frames
where the fcs value did not match the expected fcs value.
This includes data frames passed to the client as a result of
rprIfMacOperModes being not set to dropBadFcs."
REFERENCE
"IEEE 802.17 Subclause 7.6.3.6.2, badFcsFrames"
::= { rprSpanErrorCountersStatsEntry 7 }
rprSpanErrorStatsSelfSrcUcastFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) unicast frames that were
transmitted by the station itself i.e.
the source MAC is equal to the interface MAC."
REFERENCE
"IEEE 802.17 Subclause 7.6.3.8.2, selfSourcedFrames"
::= { rprSpanErrorCountersStatsEntry 8 }
rprSpanErrorStatsPmdAbortFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames that
were aborted by the PMD"
REFERENCE
"IEEE 802.17 Subclause 8.2.2, STATUS"
::= { rprSpanErrorCountersStatsEntry 9 }
rprSpanErrorStatsBadAddrFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames
with invalid SA value."
REFERENCE
"IEEE 802.17 Subclause 7.6.3.6.2, badAddressFrames"
::= { rprSpanErrorCountersStatsEntry 10 }
rprSpanErrorStatsBadParityFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames
parity value not matching the expected parity value"
REFERENCE
"IEEE 802.17 Subclause 7.6.3.6.2, badParityFrames"
::= { rprSpanErrorCountersStatsEntry 11 }
rprSpanErrorStatsContainedFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) frames
that were removed due to context containment"
REFERENCE
"IEEE 802.17 Subclause , containedFrames"
::= { rprSpanErrorCountersStatsEntry 12 }
rprSpanErrorStatsScffErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received (PHY to MAC) errored SCFF,
with bad parity, bad FCS, or both."
REFERENCE
"IEEE 802.17 Subclause 12.5.1.2, scffErrors"
::= { rprSpanErrorCountersStatsEntry 13 }
--
-- conformance information
--
rprGroups OBJECT IDENTIFIER ::= { rprConformance 1 }
rprCompliances OBJECT IDENTIFIER ::= { rprConformance 2 }
rprModuleTotalStatsCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agent that support RPR operation
with total statistics collections."
MODULE -- this module
MANDATORY-GROUPS { rprIfGroup,
rprSpanGroup,
rprSpanProtectionGroup,
rprTopoGroup,
rprFairnessGroup,
rprSpanStatsGroup,
rprClientStatsGroup,
rprErrorStatsGroup }
GROUP rprIfGroupOpt
DESCRIPTION
"Collection of objects for RPR MAC.
This group is optional."
GROUP rprSpanGroupOpt
DESCRIPTION
"Collection of objects for RPR span.
This group is optional."
GROUP rprIfStatsControlGroup
DESCRIPTION
"Current, interval, total intervals and running counters management.
This group is optional."
GROUP rprFairnessGroupOpt
DESCRIPTION
"Collection of objects for RPR fairness.
This group is optional."
GROUP rprOamGroup
DESCRIPTION
"OAM Echo and Flush control and status table.
This group is optional."
GROUP rprIfChangeSummaryGroup
DESCRIPTION
"RPR interfaces changes summry group.
This group is optional."
GROUP rprSpanCurrentGroup
DESCRIPTION
"Collection of RPR MAC Span current interval counters.
This group is optional."
GROUP rprSpanIntervalGroup
DESCRIPTION
"Collection of RPR MAC Span counters during specific 15min
interval. This group is optional."
GROUP rprSpanDayGroup
DESCRIPTION
"Collection of RPR MAC Span Day counters, contains the
cumulative sum of the span statistics for the 24 hour period
preceding the current interval.
This group is optional, the Span Day statistics can be
calculated from the 96 15min Intervals table."
GROUP rprClientCurrentGroup
DESCRIPTION
"Collection of RPR MAC client interface current interval counters.
This group is optional."
GROUP rprClientIntervalGroup
DESCRIPTION
"Collection of RPR MAC client interface counters during
specific 15min interval. This group is optional."
GROUP rprClientDayGroup
DESCRIPTION
"Collection of RPR MAC Client Day counters, contains the
cumulative sum of the client interface statistics for the 24
hour period preceding the current interval.
This group is optional, the client Day statistics can be
calculated from the 96 15min Intervals table."
GROUP rprErrorCurrentGroup
DESCRIPTION
"Collection of RPR MAC span error current interval counters.
This group is optional."
GROUP rprErrorIntervalGroup
DESCRIPTION
"Collection of RPR MAC span error counters during
specific 15min interval. This group is optional."
GROUP rprErrorDayGroup
DESCRIPTION
"Collection of RPR MAC Error Day counters, contains the
cumulative sum of the span error statistics for the 24
hour period preceding the current interval.
This group is optional, the error Day statistics can be
calculated from the 96 15min Intervals table."
::= { rprCompliances 1 }
--
-- Units of conformance.
--
rprIfGroup OBJECT-GROUP
OBJECTS {
rprIfStationsOnRing,
rprIfReversionMode,
rprIfProtectionWTR,
rprIfProtectionFastTimer,
rprIfProtectionSlowTimer,
rprIfAtdTimer,
rprIfKeepaliveTimeout,
rprIfFairnessAggressive,
rprIfPtqSize,
rprIfStqSize,
rprIfSTQFullThreshold,
rprIfIdleThreshold,
rprIfSesThreshold,
rprIfWrapConfig,
rprIfJumboFramePreferred,
rprIfMacOperModes,
rprIfRingOperModes,
rprIfCurrentStatus
}
STATUS current
DESCRIPTION
"Collection of objects needed for RPR MAC
configuration."
::= { rprGroups 1 }
rprIfGroupOpt OBJECT-GROUP
OBJECTS {
rprIfLastChange,
rprIfChanges
}
STATUS current
DESCRIPTION
"Collection of objects for RPR MAC."
::= { rprGroups 2 }
rprIfStatsControlGroup OBJECT-GROUP
OBJECTS {
rprIfStatsControlPeriodClear,
rprIfStatsControlCountPointClear,
rprIfStatsControlIntervalClear,
rprIfStatsControlCommitClear,
rprIfStatsControlTimeElapsed,
rprIfStatsControlValidIntervals
}
STATUS current
DESCRIPTION
"Collection of objects needed for RPR MAC
statistics management."
::= { rprGroups 3 }
rprSpanGroup OBJECT-GROUP
OBJECTS {
rprSpanLowerLayerIfIndex,
rprSpanTotalRingletReservedRate,
rprSpanCurrentStatus
}
STATUS current
DESCRIPTION
"Collection of objects needed for RPR Span
configuration."
::= { rprGroups 4 }
rprSpanGroupOpt OBJECT-GROUP
OBJECTS {
rprSpanLastChange,
rprSpanChanges
}
STATUS current
DESCRIPTION
"Collection of objects for RPR Span."
::= { rprGroups 5 }
rprSpanProtectionGroup OBJECT-GROUP
OBJECTS {
rprSpanProtectionNeighborValid,
rprSpanProtectionHoldOffTimer,
rprSpanProtectionCommand,
rprSpanProtectionCount,
rprSpanProtectionDuration,
rprSpanProtectionLastActivationTime
}
STATUS current
DESCRIPTION
"Collection of objects needed for RPR Span
Protection monitoring."
::= { rprGroups 6 }
rprTopoGroup OBJECT-GROUP
OBJECTS {
rprTopoImageSecMacAddress1,
rprTopoImageSecMacAddress2,
rprTopoImageStationIfIndex,
rprTopoImageStationName,
rprTopoImageInetAddressType,
rprTopoImageInetAddress,
rprTopoImageCapability,
rprTopoImageRinglet0Hops,
rprTopoImageRinglet0ReservedRate,
rprTopoImageRinglet1Hops,
rprTopoImageRinglet1ReservedRate,
rprTopoImageWestProtectionStatus,
rprTopoImageWestWeight,
rprTopoImageEastProtectionStatus,
rprTopoImageEastWeight,
rprTopoImageStatus
}
STATUS current
DESCRIPTION
"Collection of objects needed for RPR Topology
discovery."
::= { rprGroups 7 }
rprFairnessGroup OBJECT-GROUP
OBJECTS {
rprFairnessRingletWeight,
rprFairnessReservedRate,
rprFairnessMaxAllowed,
rprFairnessAgeCoef,
rprFairnessRampCoef,
rprFairnessLpCoef,
rprFairnessAdvertisementRatio,
rprFairnessMcffReportCoef,
rprFairnessActiveWeightsCoef,
rprFairnessSTQHighThreshold,
rprFairnessSTQMedThreshold,
rprFairnessSTQLowThreshold,
rprFairnessRateHighThreshold,
rprFairnessRateLowThreshold,
rprFairnessResetWaterMarks,
rprFairnessSTQHighWaterMark,
rprFairnessSTQLowWaterMark
}
STATUS current
DESCRIPTION
"Collection of objects needed for RPR Fairness
configuration."
::= { rprGroups 8 }
rprFairnessGroupOpt OBJECT-GROUP
OBJECTS {
rprFairnessLastChange,
rprFairnessChanges
}
STATUS current
DESCRIPTION
"Collection of objects for RPR Fairness."
::= { rprGroups 9 }
rprOamGroup OBJECT-GROUP
OBJECTS {
rprOamActionType,
rprOamDestAddress,
rprOamRequestRinglet,
rprOamResponseRinglet,
rprOamClassOfService,
rprOamUserData,
rprOamProtected,
rprOamRequestCount,
rprOamTimeout,
rprOamControl,
rprOamResponseCount,
rprOamAvResponseTime,
rprOamResponseStatus
}
STATUS current
DESCRIPTION
"Collection of objects needed for RPR OAM
configuration."
::= { rprGroups 10 }
rprIfChangeSummaryGroup OBJECT-GROUP
OBJECTS {
rprIfChangeSummaryNumInterfaces,
rprIfChangeSummaryIfLastChange,
rprIfChangeSummaryIfChanges,
rprIfChangeSummarySpanLastChange,
rprIfChangeSummarySpanChanges,
rprIfChangeSummaryFairnessLastChange,
rprIfChangeSummaryFairnessChanges
}
STATUS current
DESCRIPTION
"Collection of objects summarizes changes on
the RPR interfaces."
::= { rprGroups 11 }
rprSpanCurrentGroup OBJECT-GROUP
OBJECTS {
rprSpanCurrentInUcastClassAFrames,
rprSpanCurrentInUcastClassAOctets,
rprSpanCurrentInUcastClassBCirFrames,
rprSpanCurrentInUcastClassBCirOctets,
rprSpanCurrentInUcastClassBEirFrames,
rprSpanCurrentInUcastClassBEirOctets,
rprSpanCurrentInUcastClassCFrames,
rprSpanCurrentInUcastClassCOctets,
rprSpanCurrentInMcastClassAFrames,
rprSpanCurrentInMcastClassAOctets,
rprSpanCurrentInMcastClassBCirFrames,
rprSpanCurrentInMcastClassBCirOctets,
rprSpanCurrentInMcastClassBEirFrames,
rprSpanCurrentInMcastClassBEirOctets,
rprSpanCurrentInMcastClassCFrames,
rprSpanCurrentInMcastClassCOctets,
rprSpanCurrentOutUcastClassAFrames,
rprSpanCurrentOutUcastClassAOctets,
rprSpanCurrentOutUcastClassBCirFrames,
rprSpanCurrentOutUcastClassBCirOctets,
rprSpanCurrentOutUcastClassBEirFrames,
rprSpanCurrentOutUcastClassBEirOctets,
rprSpanCurrentOutUcastClassCFrames,
rprSpanCurrentOutUcastClassCOctets,
rprSpanCurrentOutMcastClassAFrames,
rprSpanCurrentOutMcastClassAOctets,
rprSpanCurrentOutMcastClassBCirFrames,
rprSpanCurrentOutMcastClassBCirOctets,
rprSpanCurrentOutMcastClassBEirFrames,
rprSpanCurrentOutMcastClassBEirOctets,
rprSpanCurrentOutMcastClassCFrames,
rprSpanCurrentOutMcastClassCOctets
}
STATUS current
DESCRIPTION
"Collection of objects counting MAC span current
statistics."
::= { rprGroups 12 }
rprSpanIntervalGroup OBJECT-GROUP
OBJECTS {
rprSpanIntervalValidData,
rprSpanIntervalTimeElapsed,
rprSpanIntervalStartTime,
rprSpanIntervalInUcastClassAFrames,
rprSpanIntervalInUcastClassAOctets,
rprSpanIntervalInUcastClassBCirFrames,
rprSpanIntervalInUcastClassBCirOctets,
rprSpanIntervalInUcastClassBEirFrames,
rprSpanIntervalInUcastClassBEirOctets,
rprSpanIntervalInUcastClassCFrames,
rprSpanIntervalInUcastClassCOctets,
rprSpanIntervalInMcastClassAFrames,
rprSpanIntervalInMcastClassAOctets,
rprSpanIntervalInMcastClassBCirFrames,
rprSpanIntervalInMcastClassBCirOctets,
rprSpanIntervalInMcastClassBEirFrames,
rprSpanIntervalInMcastClassBEirOctets,
rprSpanIntervalInMcastClassCFrames,
rprSpanIntervalInMcastClassCOctets,
rprSpanIntervalOutUcastClassAFrames,
rprSpanIntervalOutUcastClassAOctets,
rprSpanIntervalOutUcastClassBCirFrames,
rprSpanIntervalOutUcastClassBCirOctets,
rprSpanIntervalOutUcastClassBEirFrames,
rprSpanIntervalOutUcastClassBEirOctets,
rprSpanIntervalOutUcastClassCFrames,
rprSpanIntervalOutUcastClassCOctets,
rprSpanIntervalOutMcastClassAFrames,
rprSpanIntervalOutMcastClassAOctets,
rprSpanIntervalOutMcastClassBCirFrames,
rprSpanIntervalOutMcastClassBCirOctets,
rprSpanIntervalOutMcastClassBEirFrames,
rprSpanIntervalOutMcastClassBEirOctets,
rprSpanIntervalOutMcastClassCFrames,
rprSpanIntervalOutMcastClassCOctets
}
STATUS current
DESCRIPTION
"Collection of objects counting MAC span intervals
statistics."
::= { rprGroups 13 }
rprSpanDayGroup OBJECT-GROUP
OBJECTS {
rprSpanDayInUcastClassAFrames,
rprSpanDayInUcastClassAOctets,
rprSpanDayInUcastClassBCirFrames,
rprSpanDayInUcastClassBCirOctets,
rprSpanDayInUcastClassBEirFrames,
rprSpanDayInUcastClassBEirOctets,
rprSpanDayInUcastClassCFrames,
rprSpanDayInUcastClassCOctets,
rprSpanDayInMcastClassAFrames,
rprSpanDayInMcastClassAOctets,
rprSpanDayInMcastClassBCirFrames,
rprSpanDayInMcastClassBCirOctets,
rprSpanDayInMcastClassBEirFrames,
rprSpanDayInMcastClassBEirOctets,
rprSpanDayInMcastClassCFrames,
rprSpanDayInMcastClassCOctets,
rprSpanDayOutUcastClassAFrames,
rprSpanDayOutUcastClassAOctets,
rprSpanDayOutUcastClassBCirFrames,
rprSpanDayOutUcastClassBCirOctets,
rprSpanDayOutUcastClassBEirFrames,
rprSpanDayOutUcastClassBEirOctets,
rprSpanDayOutUcastClassCFrames,
rprSpanDayOutUcastClassCOctets,
rprSpanDayOutMcastClassAFrames,
rprSpanDayOutMcastClassAOctets,
rprSpanDayOutMcastClassBCirFrames,
rprSpanDayOutMcastClassBCirOctets,
rprSpanDayOutMcastClassBEirFrames,
rprSpanDayOutMcastClassBEirOctets,
rprSpanDayOutMcastClassCFrames,
rprSpanDayOutMcastClassCOctets
}
STATUS current
DESCRIPTION
"Collection of objects counting MAC span 24 hours
statistics."
::= { rprGroups 14 }
rprSpanStatsGroup OBJECT-GROUP
OBJECTS {
rprSpanStatsInUcastClassAFrames,
rprSpanStatsInUcastClassAOctets,
rprSpanStatsInUcastClassBCirFrames,
rprSpanStatsInUcastClassBCirOctets,
rprSpanStatsInUcastClassBEirFrames,
rprSpanStatsInUcastClassBEirOctets,
rprSpanStatsInUcastClassCFrames,
rprSpanStatsInUcastClassCOctets,
rprSpanStatsInMcastClassAFrames,
rprSpanStatsInMcastClassAOctets,
rprSpanStatsInMcastClassBCirFrames,
rprSpanStatsInMcastClassBCirOctets,
rprSpanStatsInMcastClassBEirFrames,
rprSpanStatsInMcastClassBEirOctets,
rprSpanStatsInMcastClassCFrames,
rprSpanStatsInMcastClassCOctets,
rprSpanStatsInCtrlFrames,
rprSpanStatsInOamEchoFrames,
rprSpanStatsInOamFlushFrames,
rprSpanStatsInOamOrgFrames,
rprSpanStatsInTopoAtdFrames,
rprSpanStatsInTopoChkSumFrames,
rprSpanStatsInTopoTpFrames,
rprSpanStatsOutUcastClassAFrames,
rprSpanStatsOutUcastClassAOctets,
rprSpanStatsOutUcastClassBCirFrames,
rprSpanStatsOutUcastClassBCirOctets,
rprSpanStatsOutUcastClassBEirFrames,
rprSpanStatsOutUcastClassBEirOctets,
rprSpanStatsOutUcastClassCFrames,
rprSpanStatsOutUcastClassCOctets,
rprSpanStatsOutMcastClassAFrames,
rprSpanStatsOutMcastClassAOctets,
rprSpanStatsOutMcastClassBCirFrames,
rprSpanStatsOutMcastClassBCirOctets,
rprSpanStatsOutMcastClassBEirFrames,
rprSpanStatsOutMcastClassBEirOctets,
rprSpanStatsOutMcastClassCFrames,
rprSpanStatsOutMcastClassCOctets,
rprSpanStatsOutCtrlFrames,
rprSpanStatsOutOamEchoFrames,
rprSpanStatsOutOamFlushFrames,
rprSpanStatsOutOamOrgFrames,
rprSpanStatsOutTopoAtdFrames,
rprSpanStatsOutTopoChkSumFrames,
rprSpanStatsOutTopoTpFrames
}
STATUS current
DESCRIPTION
"Collection of objects counting MAC span total
statistics."
::= { rprGroups 15 }
rprClientCurrentGroup OBJECT-GROUP
OBJECTS {
rprClientCurrentInUcastClassAFrames,
rprClientCurrentInUcastClassAOctets,
rprClientCurrentInUcastClassBCirFrames,
rprClientCurrentInUcastClassBCirOctets,
rprClientCurrentInUcastClassBEirFrames,
rprClientCurrentInUcastClassBEirOctets,
rprClientCurrentInUcastClassCFrames,
rprClientCurrentInUcastClassCOctets,
rprClientCurrentInMcastClassAFrames,
rprClientCurrentInMcastClassAOctets,
rprClientCurrentInMcastClassBCirFrames,
rprClientCurrentInMcastClassBCirOctets,
rprClientCurrentInMcastClassBEirFrames,
rprClientCurrentInMcastClassBEirOctets,
rprClientCurrentInMcastClassCFrames,
rprClientCurrentInMcastClassCOctets,
rprClientCurrentOutUcastClassAFrames,
rprClientCurrentOutUcastClassAOctets,
rprClientCurrentOutUcastClassBCirFrames,
rprClientCurrentOutUcastClassBCirOctets,
rprClientCurrentOutUcastClassBEirFrames,
rprClientCurrentOutUcastClassBEirOctets,
rprClientCurrentOutUcastClassCFrames,
rprClientCurrentOutUcastClassCOctets,
rprClientCurrentOutMcastClassAFrames,
rprClientCurrentOutMcastClassAOctets,
rprClientCurrentOutMcastClassBCirFrames,
rprClientCurrentOutMcastClassBCirOctets,
rprClientCurrentOutMcastClassBEirFrames,
rprClientCurrentOutMcastClassBEirOctets,
rprClientCurrentOutMcastClassCFrames,
rprClientCurrentOutMcastClassCOctets
}
STATUS current
DESCRIPTION
"Collection of objects counting MAC client interface
current statistics."
::= { rprGroups 16 }
rprClientIntervalGroup OBJECT-GROUP
OBJECTS {
rprClientIntervalValidData,
rprClientIntervalTimeElapsed,
rprClientIntervalInUcastClassAFrames,
rprClientIntervalInUcastClassAOctets,
rprClientIntervalInUcastClassBCirFrames,
rprClientIntervalInUcastClassBCirOctets,
rprClientIntervalInUcastClassBEirFrames,
rprClientIntervalInUcastClassBEirOctets,
rprClientIntervalInUcastClassCFrames,
rprClientIntervalInUcastClassCOctets,
rprClientIntervalInMcastClassAFrames,
rprClientIntervalInMcastClassAOctets,
rprClientIntervalInMcastClassBCirFrames,
rprClientIntervalInMcastClassBCirOctets,
rprClientIntervalInMcastClassBEirFrames,
rprClientIntervalInMcastClassBEirOctets,
rprClientIntervalInMcastClassCFrames,
rprClientIntervalInMcastClassCOctets,
rprClientIntervalOutUcastClassAFrames,
rprClientIntervalOutUcastClassAOctets,
rprClientIntervalOutUcastClassBCirFrames,
rprClientIntervalOutUcastClassBCirOctets,
rprClientIntervalOutUcastClassBEirFrames,
rprClientIntervalOutUcastClassBEirOctets,
rprClientIntervalOutUcastClassCFrames,
rprClientIntervalOutUcastClassCOctets,
rprClientIntervalOutMcastClassAFrames,
rprClientIntervalOutMcastClassAOctets,
rprClientIntervalOutMcastClassBCirFrames,
rprClientIntervalOutMcastClassBCirOctets,
rprClientIntervalOutMcastClassBEirFrames,
rprClientIntervalOutMcastClassBEirOctets,
rprClientIntervalOutMcastClassCFrames,
rprClientIntervalOutMcastClassCOctets
}
STATUS current
DESCRIPTION
"Collection of objects counting MAC client interface
intervals statistics."
::= { rprGroups 17 }
rprClientDayGroup OBJECT-GROUP
OBJECTS {
rprClientDayInUcastClassAFrames,
rprClientDayInUcastClassAOctets,
rprClientDayInUcastClassBCirFrames,
rprClientDayInUcastClassBCirOctets,
rprClientDayInUcastClassBEirFrames,
rprClientDayInUcastClassBEirOctets,
rprClientDayInUcastClassCFrames,
rprClientDayInUcastClassCOctets,
rprClientDayInMcastClassAFrames,
rprClientDayInMcastClassAOctets,
rprClientDayInMcastClassBCirFrames,
rprClientDayInMcastClassBCirOctets,
rprClientDayInMcastClassBEirFrames,
rprClientDayInMcastClassBEirOctets,
rprClientDayInMcastClassCFrames,
rprClientDayInMcastClassCOctets,
rprClientDayOutUcastClassAFrames,
rprClientDayOutUcastClassAOctets,
rprClientDayOutUcastClassBCirFrames,
rprClientDayOutUcastClassBCirOctets,
rprClientDayOutUcastClassBEirFrames,
rprClientDayOutUcastClassBEirOctets,
rprClientDayOutUcastClassCFrames,
rprClientDayOutUcastClassCOctets,
rprClientDayOutMcastClassAFrames,
rprClientDayOutMcastClassAOctets,
rprClientDayOutMcastClassBCirFrames,
rprClientDayOutMcastClassBCirOctets,
rprClientDayOutMcastClassBEirFrames,
rprClientDayOutMcastClassBEirOctets,
rprClientDayOutMcastClassCFrames,
rprClientDayOutMcastClassCOctets
}
STATUS current
DESCRIPTION
"Collection of objects counting MAC client interface
24 hours statistics."
::= { rprGroups 18 }
rprClientStatsGroup OBJECT-GROUP
OBJECTS {
rprClientStatsInUcastClassAFrames,
rprClientStatsInUcastClassAOctets,
rprClientStatsInUcastClassBCirFrames,
rprClientStatsInUcastClassBCirOctets,
rprClientStatsInUcastClassBEirFrames,
rprClientStatsInUcastClassBEirOctets,
rprClientStatsInUcastClassCFrames,
rprClientStatsInUcastClassCOctets,
rprClientStatsInMcastClassAFrames,
rprClientStatsInMcastClassAOctets,
rprClientStatsInMcastClassBCirFrames,
rprClientStatsInMcastClassBCirOctets,
rprClientStatsInMcastClassBEirFrames,
rprClientStatsInMcastClassBEirOctets,
rprClientStatsInMcastClassCFrames,
rprClientStatsInMcastClassCOctets,
rprClientStatsInBcastFrames,
rprClientStatsOutUcastClassAFrames,
rprClientStatsOutUcastClassAOctets,
rprClientStatsOutUcastClassBCirFrames,
rprClientStatsOutUcastClassBCirOctets,
rprClientStatsOutUcastClassBEirFrames,
rprClientStatsOutUcastClassBEirOctets,
rprClientStatsOutUcastClassCFrames,
rprClientStatsOutUcastClassCOctets,
rprClientStatsOutMcastClassAFrames,
rprClientStatsOutMcastClassAOctets,
rprClientStatsOutMcastClassBCirFrames,
rprClientStatsOutMcastClassBCirOctets,
rprClientStatsOutMcastClassBEirFrames,
rprClientStatsOutMcastClassBEirOctets,
rprClientStatsOutMcastClassCFrames,
rprClientStatsOutMcastClassCOctets,
rprClientStatsOutBcastFrames
}
STATUS current
DESCRIPTION
"Collection of objects counting MAC client interface
total statistics."
::= { rprGroups 19 }
rprErrorCurrentGroup OBJECT-GROUP
OBJECTS {
rprSpanErrorCurrentTtlExpFrames,
rprSpanErrorCurrentTooLongFrames,
rprSpanErrorCurrentTooShortFrames,
rprSpanErrorCurrentBadHecFrames,
rprSpanErrorCurrentBadFcsFrames,
rprSpanErrorCurrentSelfSrcUcastFrames,
rprSpanErrorCurrentPmdAbortFrames,
rprSpanErrorCurrentBadAddrFrames,
rprSpanErrorCurrentBadParityFrames,
rprSpanErrorCurrentContainedFrames,
rprSpanErrorCurrentScffErrors,
rprSpanErrorCurrentErroredSeconds,
rprSpanErrorCurrentSeverelyErroredSeconds,
rprSpanErrorCurrentUnavailableSeconds
}
STATUS current
DESCRIPTION
"Collection of objects counting MAC span error
current statistics."
::= { rprGroups 20 }
rprErrorIntervalGroup OBJECT-GROUP
OBJECTS {
rprSpanErrorIntervalValidData,
rprSpanErrorIntervalTimeElapsed,
rprSpanErrorIntervalTtlExpFrames,
rprSpanErrorIntervalTooLongFrames,
rprSpanErrorIntervalTooShortFrames,
rprSpanErrorIntervalBadHecFrames,
rprSpanErrorIntervalBadFcsFrames,
rprSpanErrorIntervalSelfSrcUcastFrames,
rprSpanErrorIntervalPmdAbortFrames,
rprSpanErrorIntervalBadAddrFrames,
rprSpanErrorIntervalBadParityFrames,
rprSpanErrorIntervalContainedFrames,
rprSpanErrorIntervalScffErrors,
rprSpanErrorIntervalErroredSeconds,
rprSpanErrorIntervalSeverelyErroredSeconds,
rprSpanErrorIntervalUnavailableSeconds
}
STATUS current
DESCRIPTION
"Collection of objects counting MAC span error
intervals statistics."
::= { rprGroups 21 }
rprErrorDayGroup OBJECT-GROUP
OBJECTS {
rprSpanErrorDayTtlExpFrames,
rprSpanErrorDayTooLongFrames,
rprSpanErrorDayTooShortFrames,
rprSpanErrorDayBadHecFrames,
rprSpanErrorDayBadFcsFrames,
rprSpanErrorDaySelfSrcUcastFrames,
rprSpanErrorDayPmdAbortFrames,
rprSpanErrorDayBadAddrFrames,
rprSpanErrorDayBadParityFrames,
rprSpanErrorDayContainedFrames,
rprSpanErrorDayScffErrors,
rprSpanErrorDayErroredSeconds,
rprSpanErrorDaySeverelyErroredSeconds,
rprSpanErrorDayUnavailableSeconds
}
STATUS current
DESCRIPTION
"Collection of objects counting MAC span error
24 hours statistics."
::= { rprGroups 22 }
rprErrorStatsGroup OBJECT-GROUP
OBJECTS {
rprSpanErrorStatsTtlExpFrames,
rprSpanErrorStatsTooLongFrames,
rprSpanErrorStatsTooShortFrames,
rprSpanErrorStatsBadHecFrames,
rprSpanErrorStatsBadFcsFrames,
rprSpanErrorStatsSelfSrcUcastFrames,
rprSpanErrorStatsPmdAbortFrames,
rprSpanErrorStatsBadAddrFrames,
rprSpanErrorStatsBadParityFrames,
rprSpanErrorStatsContainedFrames,
rprSpanErrorStatsScffErrors
}
STATUS current
DESCRIPTION
"Collection of objects counting MAC span error
total statistics."
::= { rprGroups 23 }
END