david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/IPMROUTE-MIB

952 lines
33 KiB
Plaintext
Raw Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
--
-- This MIB document has been modified to avoid a name conflict
-- with the standard version (RFC 2932) of this MIB. All occurances
-- of ipMRoute have been changed to ipMRoute1. This will not have
-- any impact on users. M. Davison, July, 2001.
--
IPMROUTE-MIB DEFINITIONS ::= BEGIN
IMPORTS
-- NOTE TO RFC EDITOR: When this document is published as
-- an RFC, change 'experimental' to 'mib-2' in the
-- following import, and delete this comment
MODULE-IDENTITY, OBJECT-TYPE, experimental,
Integer32, Counter32, Counter64, Gauge32,
IpAddress, TimeTicks FROM SNMPv2-SMI
RowStatus, TEXTUAL-CONVENTION,
TruthValue, DisplayString FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
InterfaceIndexOrZero,
InterfaceIndex FROM IF-MIB;
ipMRoute1MIB MODULE-IDENTITY
LAST-UPDATED "9907221200Z" -- July 22, 1999
ORGANIZATION "IETF IDMR Working Group"
CONTACT-INFO
" Dave Thaler
Microsoft Corporation
One Microsoft Way
Redmond, WA 98052-6399
US
Phone: +1 425 703 8835
EMail: dthaler@dthaler.microsoft.com"
DESCRIPTION
"The MIB module for management of IP Multicast routing, but
independent of the specific multicast routing protocol in
use."
REVISION "9907221200Z" -- July 22, 1999
DESCRIPTION
"Initial version, published as RFC xxxx (to be filled in by
RFC-Editor)."
::= { experimental 60 }
-- NOTE TO RFC EDITOR: When this document is published as
-- an RFC, change '{ experimental 60 }' to '{ mib-2 XX }'
-- where XX is assigned by IANA, and delete this comment.
-- Textual Conventions
IpMRoute1Protocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The multicast routing protocol. Inclusion of values for
multicast routing protocols is not intended to imply that
those protocols need be supported."
SYNTAX INTEGER {
other(1), -- none of the following
local(2), -- e.g., manually configured
netmgmt(3), -- set via net.mgmt protocol
dvmrp(4),
mospf(5),
pimSparseDense(6), -- PIMv1, both DM and SM
cbt(7),
pimSparseMode(8), -- PIM-SM
pimDenseMode(9), -- PIM-DM
igmpOnly(10),
bgmp(11),
msdp(12)
}
-- Top-level structure of the MIB
ipMRoute1MIBObjects OBJECT IDENTIFIER ::= { ipMRoute1MIB 1 }
ipMRoute1 OBJECT IDENTIFIER ::= { ipMRoute1MIBObjects 1 }
-- the IP Multicast Routing MIB-Group
--
-- a collection of objects providing information about
-- IP Multicast Groups
ipMRoute1Enable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The enabled status of IP Multicast routing on this router."
::= { ipMRoute1 1 }
ipMRoute1EntryCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of rows in the ipMRoute1Table. This can be used
to monitor the multicast routing table size."
::= { ipMRoute1 7 }
ipMRoute1Table OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRoute1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing multicast routing
information for IP datagrams sent by particular sources to
the IP multicast groups known to this router."
::= { ipMRoute1 2 }
ipMRoute1Entry OBJECT-TYPE
SYNTAX IpMRoute1Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the multicast routing
information for IP datagrams from a particular source and
addressed to a particular IP multicast group address.
Discontinuities in counters in this entry can be detected by
observing the value of ipMRoute1UpTime."
INDEX { ipMRoute1Group,
ipMRoute1Source,
ipMRoute1SourceMask }
::= { ipMRoute1Table 1 }
IpMRoute1Entry ::= SEQUENCE {
ipMRoute1Group IpAddress,
ipMRoute1Source IpAddress,
ipMRoute1SourceMask IpAddress,
ipMRoute1UpstreamNeighbor IpAddress,
ipMRoute1InIfIndex InterfaceIndexOrZero,
ipMRoute1UpTime TimeTicks,
ipMRoute1ExpiryTime TimeTicks,
ipMRoute1Pkts Counter32,
ipMRoute1DifferentInIfPackets Counter32,
ipMRoute1Octets Counter32,
ipMRoute1Protocol IpMRoute1Protocol,
ipMRoute1RtProto INTEGER,
ipMRoute1RtAddress IpAddress,
ipMRoute1RtMask IpAddress,
ipMRoute1RtType INTEGER,
ipMRoute1HCOctets Counter64
}
ipMRoute1Group OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address for which this entry
contains multicast routing information."
::= { ipMRoute1Entry 1 }
ipMRoute1Source OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address which when combined with the
corresponding value of ipMRoute1SourceMask identifies the
sources for which this entry contains multicast routing
information."
::= { ipMRoute1Entry 2 }
ipMRoute1SourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding
value of ipMRoute1Source identifies the sources for which
this entry contains multicast routing information."
::= { ipMRoute1Entry 3 }
ipMRoute1UpstreamNeighbor OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the upstream neighbor (e.g., RPF neighbor)
from which IP datagrams from these sources to this multicast
address are received, or 0.0.0.0 if the upstream neighbor is
unknown (e.g., in CBT)."
::= { ipMRoute1Entry 4 }
ipMRoute1InIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of ifIndex for the interface on which IP
datagrams sent by these sources to this multicast address
are received. A value of 0 indicates that datagrams are not
subject to an incoming interface check, but may be accepted
on multiple interfaces (e.g., in CBT)."
::= { ipMRoute1Entry 5 }
ipMRoute1UpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the multicast routing information
represented by this entry was learned by the router."
::= { ipMRoute1Entry 6 }
ipMRoute1ExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of time remaining before this entry will
be aged out. The value 0 indicates that the entry is not
subject to aging."
::= { ipMRoute1Entry 7 }
ipMRoute1Pkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which this router has received from
these sources and addressed to this multicast group
address."
::= { ipMRoute1Entry 8 }
ipMRoute1DifferentInIfPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which this router has received from
these sources and addressed to this multicast group address,
which were dropped because they were not received on the
interface indicated by ipMRoute1InIfIndex. Packets which are
not subject to an incoming interface check (e.g., using CBT)
are not counted."
::= { ipMRoute1Entry 9 }
ipMRoute1Octets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in IP datagrams which were
received from these sources and addressed to this multicast
group address, and which were forwarded by this router."
::= { ipMRoute1Entry 10 }
ipMRoute1Protocol OBJECT-TYPE
SYNTAX IpMRoute1Protocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The multicast routing protocol via which this multicast
forwarding entry was learned."
::= { ipMRoute1Entry 11 }
ipMRoute1RtProto OBJECT-TYPE
SYNTAX INTEGER {
other (1), -- not specified
local (2), -- local interface
netmgmt (3), -- static route
icmp (4), -- result of ICMP Redirect
-- the following are all dynamic
-- routing protocols
egp (5), -- Exterior Gateway Protocol
ggp (6), -- Gateway-Gateway Protocol
hello (7), -- FuzzBall HelloSpeak
rip (8), -- Berkeley RIP or RIP-II
isIs (9), -- Dual IS-IS
esIs (10), -- ISO 9542
ciscoIgrp (11), -- Cisco IGRP
bbnSpfIgp (12), -- BBN SPF IGP
ospf (13), -- Open Shortest Path First
bgp (14), -- Border Gateway Protocol
idpr (15), -- InterDomain Policy Routing
ciscoEigrp (16), -- Cisco EIGRP
dvmrp (17) -- DVMRP
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which the route used to find the
upstream or parent interface for this multicast forwarding
entry was learned. Inclusion of values for routing
protocols is not intended to imply that those protocols need
be supported."
::= { ipMRoute1Entry 12 }
ipMRoute1RtAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address portion of the route used to find the upstream
or parent interface for this multicast forwarding entry."
::= { ipMRoute1Entry 13 }
ipMRoute1RtMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mask associated with the route used to find the upstream
or parent interface for this multicast forwarding entry."
::= { ipMRoute1Entry 14 }
ipMRoute1RtType OBJECT-TYPE
SYNTAX INTEGER {
unicast (1), -- Unicast route used in multicast RIB
multicast (2) -- Multicast route
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason the given route was placed in the (logical)
multicast Routing Information Base (RIB). A value of
unicast means that the route would normally be placed only
in the unicast RIB, but was placed in the multicast RIB
(instead or in addition) due to local configuration, such as
when running PIM over RIP. A value of multicast means that
the route was explicitly added to the multicast RIB by the
routing protocol, such as DVMRP or Multiprotocol BGP."
::= { ipMRoute1Entry 15 }
ipMRoute1HCOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in IP datagrams which were
received from these sources and addressed to this multicast
group address, and which were forwarded by this router.
This object is a 64-bit version of ipMRoute1Octets."
::= { ipMRoute1Entry 16 }
--
-- The IP Multicast Routing Next Hop Table
--
ipMRoute1NextHopTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRoute1NextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on the next-
hops on outgoing interfaces for routing IP multicast
datagrams. Each entry is one of a list of next-hops on
outgoing interfaces for particular sources sending to a
particular multicast group address."
::= { ipMRoute1 3 }
ipMRoute1NextHopEntry OBJECT-TYPE
SYNTAX IpMRoute1NextHopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the list of next-hops on
outgoing interfaces to which IP multicast datagrams from
particular sources to a IP multicast group address are
routed. Discontinuities in counters in this entry can be
detected by observing the value of ipMRoute1UpTime."
INDEX { ipMRoute1NextHopGroup, ipMRoute1NextHopSource,
ipMRoute1NextHopSourceMask, ipMRoute1NextHopIfIndex,
ipMRoute1NextHopAddress }
::= { ipMRoute1NextHopTable 1 }
IpMRoute1NextHopEntry ::= SEQUENCE {
ipMRoute1NextHopGroup IpAddress,
ipMRoute1NextHopSource IpAddress,
ipMRoute1NextHopSourceMask IpAddress,
ipMRoute1NextHopIfIndex InterfaceIndex,
ipMRoute1NextHopAddress IpAddress,
ipMRoute1NextHopState INTEGER,
ipMRoute1NextHopUpTime TimeTicks,
ipMRoute1NextHopExpiryTime TimeTicks,
ipMRoute1NextHopClosestMemberHops Integer32,
ipMRoute1NextHopProtocol IpMRoute1Protocol,
ipMRoute1NextHopPkts Counter32
}
ipMRoute1NextHopGroup OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group for which this entry specifies a
next-hop on an outgoing interface."
::= { ipMRoute1NextHopEntry 1 }
ipMRoute1NextHopSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address which when combined with the
corresponding value of ipMRoute1NextHopSourceMask identifies
the sources for which this entry specifies a next-hop on an
outgoing interface."
::= { ipMRoute1NextHopEntry 2 }
ipMRoute1NextHopSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network mask which when combined with the corresponding
value of ipMRoute1NextHopSource identifies the sources for
which this entry specifies a next-hop on an outgoing
interface."
::= { ipMRoute1NextHopEntry 3 }
ipMRoute1NextHopIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for the outgoing
interface for this next-hop."
::= { ipMRoute1NextHopEntry 4 }
ipMRoute1NextHopAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the next-hop specific to this entry. For
most interfaces, this is identical to ipMRoute1NextHopGroup.
NBMA interfaces, however, may have multiple next-hop
addresses out a single outgoing interface."
::= { ipMRoute1NextHopEntry 5 }
ipMRoute1NextHopState OBJECT-TYPE
SYNTAX INTEGER { pruned(1), forwarding(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the outgoing interface and next-
hop represented by this entry is currently being used to
forward IP datagrams. The value 'forwarding' indicates it
is currently being used; the value 'pruned' indicates it is
not."
::= { ipMRoute1NextHopEntry 6 }
ipMRoute1NextHopUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the multicast routing information
represented by this entry was learned by the router."
::= { ipMRoute1NextHopEntry 7 }
ipMRoute1NextHopExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum amount of time remaining before this entry will
be aged out. If ipMRoute1NextHopState is pruned(1), the
remaining time until the prune expires and the state reverts
to forwarding(2). Otherwise, the remaining time until this
entry is removed from the table. The time remaining may be
copied from ipMRoute1ExpiryTime if the protocol in use for
this entry dos not specify next-hop timers. The value 0
indicates that the entry is not subject to aging."
::= { ipMRoute1NextHopEntry 8 }
ipMRoute1NextHopClosestMemberHops OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of hops between this router and any
member of this IP multicast group reached via this next-hop
on this outgoing interface. Any IP multicast datagrams for
the group which have a TTL less than this number of hops
will not be forwarded to this next-hop."
::= { ipMRoute1NextHopEntry 9 }
ipMRoute1NextHopProtocol OBJECT-TYPE
SYNTAX IpMRoute1Protocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which this next-hop was learned."
::= { ipMRoute1NextHopEntry 10 }
ipMRoute1NextHopPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets which have been forwarded using this
route."
::= { ipMRoute1NextHopEntry 11 }
--
-- The Multicast Routing Interface Table
--
ipMRoute1InterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRoute1InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containg multicast routing
information specific to interfaces."
::= { ipMRoute1 4 }
ipMRoute1InterfaceEntry OBJECT-TYPE
SYNTAX IpMRoute1InterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing the multicast routing
information for a particular interface."
INDEX { ipMRoute1InterfaceIfIndex }
::= { ipMRoute1InterfaceTable 1 }
IpMRoute1InterfaceEntry ::= SEQUENCE {
ipMRoute1InterfaceIfIndex InterfaceIndex,
ipMRoute1InterfaceTtl Integer32,
ipMRoute1InterfaceProtocol IpMRoute1Protocol,
ipMRoute1InterfaceRateLimit Integer32,
ipMRoute1InterfaceInMcastOctets Counter32,
ipMRoute1InterfaceOutMcastOctets Counter32,
ipMRoute1InterfaceHCInMcastOctets Counter64,
ipMRoute1InterfaceHCOutMcastOctets Counter64
}
ipMRoute1InterfaceIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value of the interface for which this entry
contains information."
::= { ipMRoute1InterfaceEntry 1 }
ipMRoute1InterfaceTtl OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The datagram TTL threshold for the interface. Any IP
multicast datagrams with a TTL less than this threshold will
not be forwarded out the interface. The default value of 0
means all multicast packets are forwarded out the
interface."
::= { ipMRoute1InterfaceEntry 2 }
ipMRoute1InterfaceProtocol OBJECT-TYPE
SYNTAX IpMRoute1Protocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing protocol running on this interface."
::= { ipMRoute1InterfaceEntry 3 }
ipMRoute1InterfaceRateLimit OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The rate-limit, in kilobits per second, of forwarded
multicast traffic on the interface. A rate-limit of 0
indicates that no rate limiting is done."
DEFVAL { 0 }
::= { ipMRoute1InterfaceEntry 4 }
ipMRoute1InterfaceInMcastOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have arrived
on the interface, including framing characters. This object
is similar to ifInOctets in the Interfaces MIB, except that
only multicast packets are counted."
::= { ipMRoute1InterfaceEntry 5 }
ipMRoute1InterfaceOutMcastOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have been
sent on the interface."
::= { ipMRoute1InterfaceEntry 6 }
ipMRoute1InterfaceHCInMcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have arrived
on the interface, including framing characters. This object
is a 64-bit version of ipMRoute1InterfaceInMcastOctets. It
is similar to ifHCInOctets in the Interfaces MIB, except
that only multicast packets are counted."
::= { ipMRoute1InterfaceEntry 7 }
ipMRoute1InterfaceHCOutMcastOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets of multicast packets that have been
sent on the interface. This object is a 64-bit version of
ipMRoute1InterfaceOutMcastOctets."
::= { ipMRoute1InterfaceEntry 8 }
--
-- The IP Multicast Scope Boundary Table
--
ipMRoute1BoundaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRoute1BoundaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the router's scoped
multicast address boundaries."
::= { ipMRoute1 5 }
ipMRoute1BoundaryEntry OBJECT-TYPE
SYNTAX IpMRoute1BoundaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the ipMRoute1BoundaryTable
representing a scoped boundary."
INDEX { ipMRoute1BoundaryIfIndex, ipMRoute1BoundaryAddress,
ipMRoute1BoundaryAddressMask }
::= { ipMRoute1BoundaryTable 1 }
IpMRoute1BoundaryEntry ::= SEQUENCE {
ipMRoute1BoundaryIfIndex InterfaceIndex,
ipMRoute1BoundaryAddress IpAddress,
ipMRoute1BoundaryAddressMask IpAddress,
ipMRoute1BoundaryStatus RowStatus
}
ipMRoute1BoundaryIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IfIndex value for the interface to which this boundary
applies. Packets with a destination address in the
associated address/mask range will not be forwarded out this
interface."
::= { ipMRoute1BoundaryEntry 1 }
ipMRoute1BoundaryAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address which when combined with the
corresponding value of ipMRoute1BoundaryAddressMask
identifies the group range for which the scoped boundary
exists. Scoped addresses must come from the range 239.x.x.x
as specified in RFC 2365."
::= { ipMRoute1BoundaryEntry 2 }
ipMRoute1BoundaryAddressMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address mask which when combined with the
corresponding value of ipMRoute1BoundaryAddress identifies
the group range for which the scoped boundary exists."
::= { ipMRoute1BoundaryEntry 3 }
ipMRoute1BoundaryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { ipMRoute1BoundaryEntry 4 }
--
-- The IP Multicast Scope Name Table
--
ipMRoute1ScopeNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMRoute1ScopeNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the multicast scope names."
::= { ipMRoute1 6 }
ipMRoute1ScopeNameEntry OBJECT-TYPE
SYNTAX IpMRoute1ScopeNameEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the ipMRoute1ScopeNameTable
representing a multicast scope name."
INDEX { ipMRoute1ScopeNameAddress,
ipMRoute1ScopeNameAddressMask,
IMPLIED ipMRoute1ScopeNameLanguage }
::= { ipMRoute1ScopeNameTable 1 }
IpMRoute1ScopeNameEntry ::= SEQUENCE {
ipMRoute1ScopeNameAddress IpAddress,
ipMRoute1ScopeNameAddressMask IpAddress,
ipMRoute1ScopeNameLanguage DisplayString,
ipMRoute1ScopeNameString SnmpAdminString,
ipMRoute1ScopeNameDefault TruthValue,
ipMRoute1ScopeNameStatus RowStatus
}
ipMRoute1ScopeNameAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address which when combined with the
corresponding value of ipMRoute1ScopeNameAddressMask
identifies the group range associated with the multicast
scope. Scoped addresses must come from the range
239.x.x.x."
::= { ipMRoute1ScopeNameEntry 1 }
ipMRoute1ScopeNameAddressMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address mask which when combined with the
corresponding value of ipMRoute1ScopeNameAddress identifies
the group range associated with the multicast scope."
::= { ipMRoute1ScopeNameEntry 2 }
ipMRoute1ScopeNameLanguage OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An RFC 1766-style language tag, with all alphabetic
characters converted to lowercase. This restriction is
intended to make the lexical ordering imposed by SNMP useful
when applied to language tags. Note that it is
theoretically possible for a valid language tag to exceed
the allowed length of this object, and thus be impossible to
represent in this table. Sampling of language tags in
current use on the Internet suggests that this limit does
not pose a serious problem in practice."
::= { ipMRoute1ScopeNameEntry 3 }
ipMRoute1ScopeNameString OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The textual name associated with the multicast scope. The
value of this object should be suitable for displaying to
end-users, such as when allocating a multicast address in
this scope. When no name is specified, the default value of
this object should be the string 239.x.x.x/y with x and y
replaced appropriately to describe the address and mask
length associated with the scope."
::= { ipMRoute1ScopeNameEntry 4 }
ipMRoute1ScopeNameDefault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If true, indicates a preference that the name in the
following language should be used by applications if no name
is available in a desired language."
DEFVAL { false }
::= { ipMRoute1ScopeNameEntry 5 }
ipMRoute1ScopeNameStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this row, by which new entries may be
created, or old entries deleted from this table."
::= { ipMRoute1ScopeNameEntry 6 }
-- conformance information
ipMRoute1MIBConformance
OBJECT IDENTIFIER ::= { ipMRoute1MIB 2 }
ipMRoute1MIBCompliances
OBJECT IDENTIFIER ::= { ipMRoute1MIBConformance 1 }
ipMRoute1MIBGroups OBJECT IDENTIFIER ::= { ipMRoute1MIBConformance 2 }
-- compliance statements
ipMRoute1MIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the IP Multicast MIB."
MODULE -- this module
MANDATORY-GROUPS { ipMRoute1MIBBasicGroup,
ipMRoute1MIBRouteGroup}
GROUP ipMRoute1MIBBoundaryGroup
DESCRIPTION
"This group is mandatory if the router supports
administratively-scoped multicast address boundaries."
OBJECT ipMRoute1BoundaryStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT ipMRoute1ScopeNameStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
GROUP ipMRoute1MIBHCInterfaceGroup
DESCRIPTION
"This group is mandatory only for those network interfaces
for which the value of the corresponding instance of ifSpeed
is greater than 20,000,000 bits/second."
::= { ipMRoute1MIBCompliances 1 }
-- units of conformance
ipMRoute1MIBBasicGroup OBJECT-GROUP
OBJECTS { ipMRoute1Enable, ipMRoute1EntryCount,
ipMRoute1UpstreamNeighbor, ipMRoute1InIfIndex,
ipMRoute1UpTime, ipMRoute1ExpiryTime,
ipMRoute1NextHopState,
ipMRoute1NextHopUpTime,
ipMRoute1NextHopExpiryTime,
ipMRoute1NextHopProtocol,
ipMRoute1NextHopPkts,
ipMRoute1InterfaceTtl,
ipMRoute1InterfaceProtocol, ipMRoute1InterfaceRateLimit,
ipMRoute1InterfaceInMcastOctets,
ipMRoute1InterfaceOutMcastOctets,
ipMRoute1Protocol
}
STATUS current
DESCRIPTION
"A collection of objects to support basic management of IP
Multicast routing."
::= { ipMRoute1MIBGroups 1 }
ipMRoute1MIBHopCountGroup OBJECT-GROUP
OBJECTS { ipMRoute1NextHopClosestMemberHops }
STATUS current
DESCRIPTION
"A collection of objects to support management of the use of
hop counts in IP Multicast routing."
::= { ipMRoute1MIBGroups 2 }
ipMRoute1MIBBoundaryGroup OBJECT-GROUP
OBJECTS { ipMRoute1BoundaryStatus, ipMRoute1ScopeNameString,
ipMRoute1ScopeNameDefault, ipMRoute1ScopeNameStatus }
STATUS current
DESCRIPTION
"A collection of objects to support management of scoped
multicast address boundaries."
::= { ipMRoute1MIBGroups 3 }
ipMRoute1MIBPktsOutGroup OBJECT-GROUP
OBJECTS { ipMRoute1NextHopPkts }
STATUS current
DESCRIPTION
"A collection of objects to support management of packet
counters for each outgoing interface entry of a route."
::= { ipMRoute1MIBGroups 4 }
ipMRoute1MIBHCInterfaceGroup OBJECT-GROUP
OBJECTS { ipMRoute1InterfaceHCInMcastOctets,
ipMRoute1InterfaceHCOutMcastOctets,
ipMRoute1HCOctets }
STATUS current
DESCRIPTION
"A collection of objects providing information specific to
high speed (greater than 20,000,000 bits/second) network
interfaces."
::= { ipMRoute1MIBGroups 5 }
ipMRoute1MIBRouteGroup OBJECT-GROUP
OBJECTS { ipMRoute1RtProto, ipMRoute1RtAddress,
ipMRoute1RtMask, ipMRoute1RtType }
STATUS current
DESCRIPTION
"A collection of objects providing information on the
relationship between multicast routing information, and the
IP Forwarding Table."
::= { ipMRoute1MIBGroups 6 }
ipMRoute1MIBPktsGroup OBJECT-GROUP
OBJECTS { ipMRoute1Pkts, ipMRoute1DifferentInIfPackets,
ipMRoute1Octets }
STATUS current
DESCRIPTION
"A collection of objects to support management of packet
counters for each forwarding entry."
::= { ipMRoute1MIBGroups 7 }
END
Reference in New Issue Copy Permalink