mibs/MIBS/LLDP-V2-TC-MIB

399 lines
16 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
LLDP-V2-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
Unsigned32,
org
FROM SNMPv2-SMI
TEXTUAL-CONVENTION
FROM SNMPv2-TC;
lldpV2TcMIB MODULE-IDENTITY
LAST-UPDATED "200906080000Z" -- June 08, 2009
-- <<Editor's Note: Date will need updating before publication>>
ORGANIZATION "IEEE 802.1 Working Group"
CONTACT-INFO
"WG-URL: http://grouper.ieee.org/groups/802/1/index.html
WG-EMail: STDS-802-1-L@LISTSERV.IEEE.ORG
Contact: Tony Jeffree
Postal: 11a Poplar Grove
Sale
Cheshire M33 3AX
UK
Tel: +44-161-973-4278
E-mail: tony@jeffree.co.uk"
DESCRIPTION
"Textual conventions used throughout the IEEE Std 802.1AB
version 2 and later MIB modules.
Unless otherwise indicated, the references in this
MIB module are to IEEE 802.1AB-2009.
The TCs in this MIB are taken from the original LLDP-MIB,
LLDP-EXT-DOT1-MIB, and LLDP-EXT-DOT3-MIB published in
IEEE Std 802-1D-2005, with the addition of TCs to support
the management address table. They have been made available
as a separate TC MIB module to facilitate referencing from
other MIB modules.
Copyright (C) IEEE (2009). This version of this MIB module
is published as subclause 11.5.1 of IEEE Std 802.1AB-2009;
see the standard itself for full legal notices."
REVISION "200906080000Z" -- June 08, 2009
DESCRIPTION
"Published as part of IEEE Std 802.1AB-2009 revision."
::= { org ieee(111) standards-association-numbers-series-standards(2)
lan-man-stds(802) ieee802dot1(1) 1 12 }
--
-- Definition of the root OID arc for IEEE 802.1 MIBs
--
ieee802dot1mibs OBJECT IDENTIFIER
::= { org ieee(111) standards-association-numbers-series-standards(2)
lan-man-stds(802) ieee802dot1(1) 1 }
--
-- ***********************************************************
--
-- Textual Conventions
--
-- ***********************************************************
LldpV2ChassisIdSubtype ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the source of a chassis identifier.
The enumeration 'chassisComponent(1)' represents a chassis
identifier based on the value of entPhysicalAlias object
(defined in IETF RFC 4133) for a chassis component (i.e.,
an entPhysicalClass value of 'chassis(3)').
The enumeration 'interfaceAlias(2)' represents a chassis
identifier based on the value of ifAlias object (defined in
IETF RFC 2863) for an interface on the containing chassis.
The enumeration 'portComponent(3)' represents a chassis
identifier based on the value of entPhysicalAlias object
(defined in IETF RFC 4133) for a port or backplane
component (i.e., entPhysicalClass value of 'port(10)' or
'backplane(4)'), within the containing chassis.
The enumeration 'macAddress(4)' represents a chassis
identifier based on the value of a unicast source address
(encoded in network byte order and IEEE 802.3 canonical bit
order), of a port on the containing chassis as defined in
IEEE Std 802.
The enumeration 'networkAddress(5)' represents a chassis
identifier based on a network address, associated with
a particular chassis. The encoded address is actually
composed of two fields. The first field is a single octet,
representing the IANA AddressFamilyNumbers value for the
specific address type, and the second field is the network
address value.
The enumeration 'interfaceName(6)' represents a chassis
identifier based on the value of ifName object (defined in
IETF RFC 2863) for an interface on the containing chassis.
The enumeration 'local(7)' represents a chassis identifier
based on a locally defined value."
SYNTAX INTEGER {
chassisComponent(1),
interfaceAlias(2),
portComponent(3),
macAddress(4),
networkAddress(5),
interfaceName(6),
local(7)
}
LldpV2ChassisId ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"This TC describes the format of a chassis identifier string.
Objects of this type are always used with an associated
LldpChassisIdSubtype object, which identifies the format of
the particular LldpChassisId object instance.
If the associated LldpChassisIdSubtype object has a value of
'chassisComponent(1)', then the octet string identifies
a particular instance of the entPhysicalAlias object
(defined in IETF RFC 4133) for a chassis component (i.e.,
an entPhysicalClass value of 'chassis(3)').
If the associated LldpChassisIdSubtype object has a value
of 'interfaceAlias(2)', then the octet string identifies
a particular instance of the ifAlias object (defined in
IETF RFC 2863) for an interface on the containing chassis.
If the particular ifAlias object does not contain any values,
another chassis identifier type should be used.
If the associated LldpChassisIdSubtype object has a value
of 'portComponent(3)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 4133) for a port or backplane component within
the containing chassis.
If the associated LldpChassisIdSubtype object has a value of
'macAddress(4)', then this string identifies a particular
unicast source address (encoded in network byte order and
IEEE 802.3 canonical bit order), of a port on the containing
chassis as defined in IEEE Std 802.
If the associated LldpChassisIdSubtype object has a value of
'networkAddress(5)', then this string identifies a particular
network address, encoded in network byte order, associated
with one or more ports on the containing chassis. The first
octet contains the IANA Address Family Numbers enumeration
value for the specific address type, and octets 2 through
N contain the network address value in network byte order.
If the associated LldpChassisIdSubtype object has a value
of 'interfaceName(6)', then the octet string identifies
a particular instance of the ifName object (defined in
IETF RFC 2863) for an interface on the containing chassis.
If the particular ifName object does not contain any values,
another chassis identifier type should be used.
If the associated LldpChassisIdSubtype object has a value of
'local(7)', then this string identifies a locally assigned
Chassis ID."
SYNTAX OCTET STRING (SIZE (1..255))
LldpV2PortIdSubtype ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the source of a particular type of port
identifier used in the LLDP MIB.
The enumeration 'interfaceAlias(1)' represents a port
identifier based on the ifAlias MIB object, defined in IETF
RFC 2863.
The enumeration 'portComponent(2)' represents a port
identifier based on the value of entPhysicalAlias (defined in
IETF RFC 4133) for a port component (i.e., entPhysicalClass
value of 'port(10)'), within the containing chassis.
The enumeration 'macAddress(3)' represents a port identifier
based on a unicast source address (encoded in network
byte order and IEEE 802.3 canonical bit order), which has
been detected by the agent and associated with a particular
port (IEEE Std 802).
The enumeration 'networkAddress(4)' represents a port
identifier based on a network address, detected by the agent
and associated with a particular port.
The enumeration 'interfaceName(5)' represents a port
identifier based on the ifName MIB object, defined in IETF
RFC 2863.
The enumeration 'agentCircuitId(6)' represents a port
identifier based on the agent-local identifier of the circuit
(defined in RFC 3046), detected by the agent and associated
with a particular port.
The enumeration 'local(7)' represents a port identifier
based on a value locally assigned."
SYNTAX INTEGER {
interfaceAlias(1),
portComponent(2),
macAddress(3),
networkAddress(4),
interfaceName(5),
agentCircuitId(6),
local(7)
}
LldpV2PortId ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"This TC describes the format of a port identifier string.
Objects of this type are always used with an associated
LldpPortIdSubtype object, which identifies the format of the
particular LldpPortId object instance.
If the associated LldpPortIdSubtype object has a value of
'interfaceAlias(1)', then the octet string identifies a
particular instance of the ifAlias object (defined in IETF
RFC 2863). If the particular ifAlias object does not contain
any values, another port identifier type should be used.
If the associated LldpPortIdSubtype object has a value of
'portComponent(2)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 4133) for a port or backplane component.
If the associated LldpPortIdSubtype object has a value of
'macAddress(3)', then this string identifies a particular
unicast source address (encoded in network byte order
and IEEE 802.3 canonical bit order) associated with the port
(IEEE Std 802).
If the associated LldpPortIdSubtype object has a value of
'networkAddress(4)', then this string identifies a network
address associated with the port. The first octet contains
the IANA AddressFamilyNumbers enumeration value for the
specific address type, and octets 2 through N contain the
networkAddress address value in network byte order.
If the associated LldpPortIdSubtype object has a value of
'interfaceName(5)', then the octet string identifies a
particular instance of the ifName object (defined in IETF
RFC 2863). If the particular ifName object does not contain
any values, another port identifier type should be used.
If the associated LldpPortIdSubtype object has a value of
'agentCircuitId(6)', then this string identifies a agent-local
identifier of the circuit (defined in RFC 3046).
If the associated LldpPortIdSubtype object has a value of
'local(7)', then this string identifies a locally
assigned port ID."
SYNTAX OCTET STRING (SIZE (1..255))
LldpV2ManAddrIfSubtype ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC defines an enumeration value that identifies
the interface numbering method used for defining the
interface number associated with a management address.
An object with this syntax defines the format of an
interface number object.
The enumeration 'unknown(1)' represents the case where the
interface is not known. In this case, the corresponding
interface number is of zero length.
The enumeration 'ifIndex(2)' represents interface identifier
based on the ifIndex MIB object.
The enumeration 'systemPortNumber(3)' represents interface
identifier based on the system port numbering convention."
REFERENCE
"8.5.9.5"
SYNTAX INTEGER {
unknown(1),
ifIndex(2),
systemPortNumber(3)
}
LldpV2ManAddress ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"The value of a management address associated with the LLDP
agent that may be used to reach higher layer entities to
assist discovery by network management.
It should be noted that appropriate security credentials,
such as SNMP engineId, may be required to access the LLDP
agent using a management address. These necessary credentials
should be known by the network management and the objects
associated with the credentials are not included in the
LLDP agent."
SYNTAX OCTET STRING (SIZE (1..31))
LldpV2SystemCapabilitiesMap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the system capabilities.
The bit 'other(0)' indicates that the system has capabilities
other than those listed below.
The bit 'repeater(1)' indicates that the system has repeater
capability.
The bit 'bridge(2)' indicates that the system has bridge
capability.
The bit 'wlanAccessPoint(3)' indicates that the system has
WLAN access point capability.
The bit 'router(4)' indicates that the system has router
capability.
The bit 'telephone(5)' indicates that the system has telephone
capability.
The bit 'docsisCableDevice(6)' indicates that the system has
DOCSIS Cable Device capability (IETF RFC 4639 & 2670).
The bit 'stationOnly(7)' indicates that the system has only
station capability and nothing else.
The bit 'cVLANComponent(8)' indicates that the system has
C-VLAN component functionality.
The bit 'sVLANComponent(8)' indicates that the system has
S-VLAN component functionality.
The bit 'twoPortMACRelay(10)' indicates that the system has
Two-port MAC Relay (TPMR) functionality."
SYNTAX BITS {
other(0),
repeater(1),
bridge(2),
wlanAccessPoint(3),
router(4),
telephone(5),
docsisCableDevice(6),
stationOnly(7),
cVLANComponent(8),
sVLANComponent(9),
twoPortMACRelay(10)
}
LldpV2DestAddressTableIndex ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"An index value, used as the index to the table of destination
MAC addresses used both as the destination addresses on
transmitted LLDPDUs and on received LLDPDUs. This index value
is also used as a secondary index value in tables indexed
by fields of type ifIndex, in order to associate
a destination address with each row of the table."
SYNTAX Unsigned32(1..4096)
LldpV2LinkAggStatusMap ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the link aggregation status.
The bit 'aggCapable(0)' indicates the link is capable of being
aggregated.
The bit 'aggEnabled(1)' indicates the link is currently in
aggregation."
SYNTAX BITS {
aggCapable(0),
aggEnabled(1)
}
LldpV2PowerPortClass ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This TC describes the Power over Ethernet (PoE) port class."
SYNTAX INTEGER {
pClassPSE(1),
pClassPD(2)
}
END