1504 lines
55 KiB
Plaintext
1504 lines
55 KiB
Plaintext
|
VDSL2-LINE-TC-MIB DEFINITIONS ::= BEGIN
|
||
|
|
|
||
|
|
IMPORTS
|
||
|
|
MODULE-IDENTITY,
|
||
|
|
transmission
|
||
|
|
FROM SNMPv2-SMI
|
||
|
|
|
||
|
|
TEXTUAL-CONVENTION
|
||
|
|
FROM SNMPv2-TC;
|
||
|
|
|
||
|
|
vdsl2TCMIB MODULE-IDENTITY
|
||
|
|
LAST-UPDATED "200909300000Z" -- September 30, 2009
|
||
|
|
ORGANIZATION "ADSLMIB Working Group"
|
||
|
|
CONTACT-INFO "WG-email: adslmib@ietf.org
|
||
|
|
Info: https://www1.ietf.org/mailman/listinfo/adslmib
|
||
|
|
|
||
|
|
Chair: Mike Sneed
|
||
|
|
Sand Channel Systems
|
||
|
|
Postal: P.O. Box 37324
|
||
|
|
Raleigh NC 27627-732
|
||
|
|
Email: sneedmike@hotmail.com
|
||
|
|
Phone: +1 206 600 7022
|
||
|
|
|
||
|
|
Co-Chair: Menachem Dodge
|
||
|
|
|
||
|
|
ECI Telecom Ltd.
|
||
|
|
Postal: 30 Hasivim St.
|
||
|
|
Petach Tikva 49517,
|
||
|
|
Israel.
|
||
|
|
Email: mbdodge@ieee.org
|
||
|
|
Phone: +972 3 926 8421
|
||
|
|
|
||
|
|
Co-editor: Moti Morgenstern
|
||
|
|
ECI Telecom Ltd.
|
||
|
|
Postal: 30 Hasivim St.
|
||
|
|
Petach Tikva 49517,
|
||
|
|
Israel.
|
||
|
|
Email: moti.morgenstern@ecitele.com
|
||
|
|
Phone: +972 3 926 6258
|
||
|
|
|
||
|
|
Co-editor: Scott Baillie
|
||
|
|
NEC Australia
|
||
|
|
Postal: 649-655 Springvale Road,
|
||
|
|
Mulgrave, Victoria 3170,
|
||
|
|
Australia.
|
||
|
|
Email: scott.baillie@nec.com.au
|
||
|
|
Phone: +61 3 9264 3986
|
||
|
|
|
||
|
|
Co-editor: Umberto Bonollo
|
||
|
|
NEC Australia
|
||
|
|
Postal: 649-655 Springvale Road,
|
||
|
|
Mulgrave, Victoria 3170,
|
||
|
|
Australia.
|
||
|
|
Email: umberto.bonollo@nec.com.au
|
||
|
|
Phone: +61 3 9264 3385
|
||
|
|
"
|
||
|
|
DESCRIPTION
|
||
|
|
"This MIB Module provides Textual Conventions to be
|
||
|
|
used by the VDSL2-LINE-MIB module for the purpose of
|
||
|
|
managing VDSL2, ADSL, ADSL2, and ADSL2+ lines.
|
||
|
|
|
||
|
|
Copyright (c) 2009 IETF Trust and the persons
|
||
|
|
identified as authors of the code. All rights
|
||
|
|
reserved.
|
||
|
|
|
||
|
|
Redistribution and use in source and binary
|
||
|
|
forms, with or without modification, are
|
||
|
|
permitted provided that the following
|
||
|
|
conditions are met:
|
||
|
|
|
||
|
|
- Redistributions of source code must retain the
|
||
|
|
above copyright notice, this list of conditions
|
||
|
|
and the following disclaimer.
|
||
|
|
|
||
|
|
- Redistributions in binary form must reproduce
|
||
|
|
the above copyright notice, this list of
|
||
|
|
conditions and the following disclaimer in
|
||
|
|
the documentation and/or other materials provided
|
||
|
|
with the distribution.
|
||
|
|
|
||
|
|
- Neither the name of Internet Society, IETF or
|
||
|
|
IETF Trust, nor the names of specific contributors,
|
||
|
|
may be used to endorse or promote products derived
|
||
|
|
from this software without specific prior written
|
||
|
|
permission.
|
||
|
|
|
||
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
||
|
|
CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED
|
||
|
|
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
|
||
|
|
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
|
||
|
|
THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY
|
||
|
|
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
||
|
|
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||
|
|
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||
|
|
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
|
|
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
||
|
|
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
|
||
|
|
This version of this MIB module is part of RFC 5650;
|
||
|
|
see the RFC itself for full legal notices."
|
||
|
|
|
||
|
|
REVISION "200909300000Z" -- September 30, 2009
|
||
|
|
DESCRIPTION "Initial version, published as RFC 5650."
|
||
|
|
::= { transmission 251 3} -- vdsl2MIB 3
|
||
|
|
|
||
|
|
------------------------------------------------
|
||
|
|
-- Textual Conventions --
|
||
|
|
------------------------------------------------
|
||
|
|
|
||
|
|
Xdsl2Unit ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Identifies a transceiver as being either xTU-C or xTU-R.
|
||
|
|
A VDSL2/ADSL/ADSL2 or ADSL2+ line consists of two
|
||
|
|
transceivers: an xTU-C and an xTU-R.
|
||
|
|
In the case of ADSL/ADSL2 and ADSL2+, those two transceivers are
|
||
|
|
also called atuc and atur.
|
||
|
|
In the case of VDSL2, those two transceivers are also called
|
||
|
|
vtuc and vtur.
|
||
|
|
|
||
|
|
Specified as an INTEGER, the two values are:
|
||
|
|
xtuc(1) -- central office transceiver
|
||
|
|
xtur(2) -- remote site transceiver"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
xtuc(1),
|
||
|
|
xtur(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2Direction ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Identifies the direction of a band in a VDSL2/ADSL/ADSL2/
|
||
|
|
ADSL2+ link.
|
||
|
|
The upstream direction is a transmission from the remote end
|
||
|
|
(xTU-R) towards the central office end (xTU-C). The downstream
|
||
|
|
direction is a transmission from the xTU-C towards the xTU-R.
|
||
|
|
Specified as an INTEGER, the values are defined as
|
||
|
|
follows:"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
upstream(1), -- Transmission from the xTU-R to the xTU-C.
|
||
|
|
downstream(2) -- Transmission from the xTU-C to the xTU-R.
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2Band ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Identifies a band in a VDSL2/ADSL/ADSL2/ADSL2+ link.
|
||
|
|
For a band in the upstream direction, transmission is from the
|
||
|
|
remote end (xTU-R) towards the central office end (xTU-C).
|
||
|
|
For a band in the downstream direction, transmission is from
|
||
|
|
the xTU-C towards the xTU-R.
|
||
|
|
For ADSL, ADSL2 and ADSL2+, which use a single band in the
|
||
|
|
upstream direction and a single band
|
||
|
|
in the downstream direction,
|
||
|
|
the only relevant values are upstream(1) and downstream(2).
|
||
|
|
For VDSL2, which uses multiple bands in each transmission
|
||
|
|
direction, a band in the upstream direction is indicated by any
|
||
|
|
of us0(3), us1(5), us2(7), us3(9), or us4(11), and a band in
|
||
|
|
the downstream direction is indicated by any of ds1(4),
|
||
|
|
ds2(6), ds3(8), or ds4(10).
|
||
|
|
For VDSL2, the values upstream(1) and downstream(2) may be used
|
||
|
|
when there is a need to refer to the whole upstream or
|
||
|
|
downstream traffic (e.g., report the average signal-to-noise
|
||
|
|
ratio on any transmission direction).
|
||
|
|
Specified as an INTEGER, the values are defined as
|
||
|
|
follows:"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
upstream(1), -- Transmission from the xTU-R to the xTU-C
|
||
|
|
|
||
|
|
-- (refers to the single upstream band for
|
||
|
|
-- ADSL/ADSL2/ADSL2+ or to the whole
|
||
|
|
-- upstream traffic for VDSL2).
|
||
|
|
downstream(2), -- Transmission from the xTU-C to the xTU-R
|
||
|
|
-- (refers to the single downstream band
|
||
|
|
-- for ADSL/ADSL2/ADSL2+ or to the whole
|
||
|
|
-- downstream traffic for VDSL2).
|
||
|
|
us0(3), -- Upstream band number 0 (US0) (VDSL2).
|
||
|
|
ds1(4), -- Downstream band number 1 (DS1) (VDSL2).
|
||
|
|
us1(5), -- Upstream band number 1 (US1) (VDSL2).
|
||
|
|
ds2(6), -- Downstream band number 2 (DS2) (VDSL2).
|
||
|
|
us2(7), -- Upstream band number 2 (US2) (VDSL2).
|
||
|
|
ds3(8), -- Downstream band number 3 (DS3) (VDSL2).
|
||
|
|
us3(9), -- Upstream band number 3 (US3) (VDSL2).
|
||
|
|
ds4(10), -- Downstream band number 4 (DS4) (VDSL2).
|
||
|
|
us4(11) -- Upstream band number 4 (US4) (VDSL2).
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2TransmissionModeType ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"A set of xDSL line transmission modes, with one bit
|
||
|
|
per mode. The notes (F) and (L) denote Full-Rate and
|
||
|
|
Lite/splitterless, respectively:
|
||
|
|
Bit 00 : Regional Std. (ANSI T1.413) (F)
|
||
|
|
Bit 01 : Regional Std. (ETSI DTS/TM06006) (F)
|
||
|
|
Bit 02 : G.992.1 POTS non-overlapped (F)
|
||
|
|
Bit 03 : G.992.1 POTS overlapped (F)
|
||
|
|
Bit 04 : G.992.1 ISDN non-overlapped (F)
|
||
|
|
Bit 05 : G.992.1 ISDN overlapped (F)
|
||
|
|
Bit 06 : G.992.1 TCM-ISDN non-overlapped (F)
|
||
|
|
Bit 07 : G.992.1 TCM-ISDN overlapped (F)
|
||
|
|
Bit 08 : G.992.2 POTS non-overlapped (L)
|
||
|
|
Bit 09 : G.992.2 POTS overlapped (L)
|
||
|
|
Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L)
|
||
|
|
Bit 11 : G.992.2 with TCM-ISDN overlapped (L)
|
||
|
|
Bit 12 : G.992.1 TCM-ISDN symmetric (F) --- not in G.997.1
|
||
|
|
Bit 13-17: Reserved
|
||
|
|
Bit 18 : G.992.3 POTS non-overlapped (F)
|
||
|
|
Bit 19 : G.992.3 POTS overlapped (F)
|
||
|
|
Bit 20 : G.992.3 ISDN non-overlapped (F)
|
||
|
|
Bit 21 : G.992.3 ISDN overlapped (F)
|
||
|
|
Bit 22-23: Reserved
|
||
|
|
Bit 24 : G.992.4 POTS non-overlapped (L)
|
||
|
|
Bit 25 : G.992.4 POTS overlapped (L)
|
||
|
|
Bit 26-27: Reserved
|
||
|
|
Bit 28 : G.992.3 Annex I All-Digital non-overlapped (F)
|
||
|
|
Bit 29 : G.992.3 Annex I All-Digital overlapped (F)
|
||
|
|
|
||
|
|
Bit 30 : G.992.3 Annex J All-Digital non-overlapped (F)
|
||
|
|
Bit 31 : G.992.3 Annex J All-Digital overlapped (F)
|
||
|
|
Bit 32 : G.992.4 Annex I All-Digital non-overlapped (L)
|
||
|
|
Bit 33 : G.992.4 Annex I All-Digital overlapped (L)
|
||
|
|
Bit 34 : G.992.3 Annex L POTS non-overlapped, mode 1,
|
||
|
|
wide U/S (F)
|
||
|
|
Bit 35 : G.992.3 Annex L POTS non-overlapped, mode 2,
|
||
|
|
narrow U/S(F)
|
||
|
|
Bit 36 : G.992.3 Annex L POTS overlapped, mode 3,
|
||
|
|
wide U/S (F)
|
||
|
|
Bit 37 : G.992.3 Annex L POTS overlapped, mode 4,
|
||
|
|
narrow U/S (F)
|
||
|
|
Bit 38 : G.992.3 Annex M POTS non-overlapped (F)
|
||
|
|
Bit 39 : G.992.3 Annex M POTS overlapped (F)
|
||
|
|
Bit 40 : G.992.5 POTS non-overlapped (F)
|
||
|
|
Bit 41 : G.992.5 POTS overlapped (F)
|
||
|
|
Bit 42 : G.992.5 ISDN non-overlapped (F)
|
||
|
|
Bit 43 : G.992.5 ISDN overlapped (F)
|
||
|
|
Bit 44-45: Reserved
|
||
|
|
Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F)
|
||
|
|
Bit 47 : G.992.5 Annex I All-Digital overlapped (F)
|
||
|
|
Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F)
|
||
|
|
Bit 49 : G.992.5 Annex J All-Digital overlapped (F)
|
||
|
|
Bit 50 : G.992.5 Annex M POTS non-overlapped (F)
|
||
|
|
Bit 51 : G.992.5 Annex M POTS overlapped (F)
|
||
|
|
Bit 52-55: Reserved
|
||
|
|
Bit 56 : G.993.2 Annex A
|
||
|
|
Bit 57 : G.993.2 Annex B
|
||
|
|
Bit 58 : G.993.2 Annex C
|
||
|
|
Bit 59-63: Reserved"
|
||
|
|
|
||
|
|
SYNTAX BITS {
|
||
|
|
ansit1413(0),
|
||
|
|
etsi(1),
|
||
|
|
g9921PotsNonOverlapped(2),
|
||
|
|
g9921PotsOverlapped(3),
|
||
|
|
g9921IsdnNonOverlapped(4),
|
||
|
|
g9921isdnOverlapped(5),
|
||
|
|
g9921tcmIsdnNonOverlapped(6),
|
||
|
|
g9921tcmIsdnOverlapped(7),
|
||
|
|
g9922potsNonOverlapped(8),
|
||
|
|
g9922potsOverlapped(9),
|
||
|
|
g9922tcmIsdnNonOverlapped(10),
|
||
|
|
g9922tcmIsdnOverlapped(11),
|
||
|
|
g9921tcmIsdnSymmetric(12),
|
||
|
|
reserved1(13),
|
||
|
|
reserved2(14),
|
||
|
|
reserved3(15),
|
||
|
|
|
||
|
|
reserved4(16),
|
||
|
|
reserved5(17),
|
||
|
|
g9923PotsNonOverlapped(18),
|
||
|
|
g9923PotsOverlapped(19),
|
||
|
|
g9923IsdnNonOverlapped(20),
|
||
|
|
g9923isdnOverlapped(21),
|
||
|
|
reserved6(22),
|
||
|
|
reserved7(23),
|
||
|
|
g9924potsNonOverlapped(24),
|
||
|
|
g9924potsOverlapped(25),
|
||
|
|
reserved8(26),
|
||
|
|
reserved9(27),
|
||
|
|
g9923AnnexIAllDigNonOverlapped(28),
|
||
|
|
g9923AnnexIAllDigOverlapped(29),
|
||
|
|
g9923AnnexJAllDigNonOverlapped(30),
|
||
|
|
g9923AnnexJAllDigOverlapped(31),
|
||
|
|
g9924AnnexIAllDigNonOverlapped(32),
|
||
|
|
g9924AnnexIAllDigOverlapped(33),
|
||
|
|
g9923AnnexLMode1NonOverlapped(34),
|
||
|
|
g9923AnnexLMode2NonOverlapped(35),
|
||
|
|
g9923AnnexLMode3Overlapped(36),
|
||
|
|
g9923AnnexLMode4Overlapped(37),
|
||
|
|
g9923AnnexMPotsNonOverlapped(38),
|
||
|
|
g9923AnnexMPotsOverlapped(39),
|
||
|
|
g9925PotsNonOverlapped(40),
|
||
|
|
g9925PotsOverlapped(41),
|
||
|
|
g9925IsdnNonOverlapped(42),
|
||
|
|
g9925isdnOverlapped(43),
|
||
|
|
reserved10(44),
|
||
|
|
reserved11(45),
|
||
|
|
g9925AnnexIAllDigNonOverlapped(46),
|
||
|
|
g9925AnnexIAllDigOverlapped(47),
|
||
|
|
g9925AnnexJAllDigNonOverlapped(48),
|
||
|
|
g9925AnnexJAllDigOverlapped(49),
|
||
|
|
g9925AnnexMPotsNonOverlapped(50),
|
||
|
|
g9925AnnexMPotsOverlapped(51),
|
||
|
|
reserved12(52),
|
||
|
|
reserved13(53),
|
||
|
|
reserved14(54),
|
||
|
|
reserved15(55),
|
||
|
|
g9932AnnexA(56),
|
||
|
|
g9932AnnexB(57),
|
||
|
|
g9932AnnexC(58),
|
||
|
|
reserved16(59),
|
||
|
|
reserved17(60),
|
||
|
|
reserved18(61),
|
||
|
|
reserved19(62),
|
||
|
|
reserved20(63)
|
||
|
|
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2RaMode ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the rate adaptation behavior for the line.
|
||
|
|
The three possible behaviors are:
|
||
|
|
manual (1) - No Rate-Adaptation. The initialization
|
||
|
|
process attempts to synchronize to a
|
||
|
|
specified rate.
|
||
|
|
raInit (2) - Rate-Adaptation during initialization process
|
||
|
|
only, which attempts to synchronize to a rate
|
||
|
|
between minimum and maximum specified values.
|
||
|
|
dynamicRa (3)- Dynamic Rate-Adaptation during initialization
|
||
|
|
process as well as during Showtime."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
manual(1),
|
||
|
|
raInit(2),
|
||
|
|
dynamicRa(3)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2InitResult ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Specifies the result of full initialization attempt; the
|
||
|
|
six possible result values are:
|
||
|
|
noFail (0) - Successful initialization
|
||
|
|
configError (1) - Configuration failure
|
||
|
|
configNotFeasible (2) - Configuration details not supported
|
||
|
|
commFail (3) - Communication failure
|
||
|
|
noPeerAtu (4) - Peer ATU not detected
|
||
|
|
otherCause (5) - Other initialization failure reason"
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
noFail(0),
|
||
|
|
configError(1),
|
||
|
|
configNotFeasible(2),
|
||
|
|
commFail(3),
|
||
|
|
noPeerAtu(4),
|
||
|
|
otherCause(5)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2OperationModes ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The VDSL2 management model specified includes an xDSL Mode
|
||
|
|
object that identifies an instance of xDSL Mode-Specific
|
||
|
|
PSD Configuration object in the xDSL Line Profile. The
|
||
|
|
|
||
|
|
following classes of xDSL operating mode are defined.
|
||
|
|
The notes (F) and (L) denote Full-Rate and Lite/splitterless,
|
||
|
|
respectively:
|
||
|
|
+-------+--------------------------------------------------+
|
||
|
|
| Value | xDSL operation mode description |
|
||
|
|
+-------+--------------------------------------------------+
|
||
|
|
1 - The default/generic PSD configuration. Default
|
||
|
|
configuration will be used when no other matching
|
||
|
|
mode-specific configuration can be found.
|
||
|
|
2 - Regional Std. (ANSI T1.413) (F)
|
||
|
|
3 - Regional Std. (ETSI DTS/TM06006) (F)
|
||
|
|
4 - G.992.1 POTS non-overlapped (F)
|
||
|
|
5 - G.992.1 POTS overlapped (F)
|
||
|
|
6 - G.992.1 ISDN non-overlapped (F)
|
||
|
|
7 - G.992.1 ISDN overlapped (F)
|
||
|
|
8 - G.992.1 TCM-ISDN non-overlapped (F)
|
||
|
|
9 - G.992.1 TCM-ISDN overlapped (F)
|
||
|
|
10 - G.992.2 POTS non-overlapped (L)
|
||
|
|
11 - G.992.2 POTS overlapped (L)
|
||
|
|
12 - G.992.2 with TCM-ISDN non-overlapped (L)
|
||
|
|
13 - G.992.2 with TCM-ISDN overlapped (L)
|
||
|
|
14 - G.992.1 TCM-ISDN symmetric (F) --- not in G.997.1
|
||
|
|
15-19 - Unused. Reserved for future ITU-T specification.
|
||
|
|
20 - G.992.3 POTS non-overlapped (F)
|
||
|
|
21 - G.992.3 POTS overlapped (F)
|
||
|
|
22 - G.992.3 ISDN non-overlapped (F)
|
||
|
|
23 - G.992.3 ISDN overlapped (F)
|
||
|
|
24-25 - Unused. Reserved for future ITU-T specification.
|
||
|
|
26 - G.992.4 POTS non-overlapped (L)
|
||
|
|
27 - G.992.4 POTS overlapped (L)
|
||
|
|
28-29 - Unused. Reserved for future ITU-T specification.
|
||
|
|
30 - G.992.3 Annex I All-Digital non-overlapped (F)
|
||
|
|
31 - G.992.3 Annex I All-Digital overlapped (F)
|
||
|
|
32 - G.992.3 Annex J All-Digital non-overlapped (F)
|
||
|
|
33 - G.992.3 Annex J All-Digital overlapped (F)
|
||
|
|
34 - G.992.4 Annex I All-Digital non-overlapped (L)
|
||
|
|
35 - G.992.4 Annex I All-Digital overlapped (L)
|
||
|
|
36 - G.992.3 Annex L POTS non-overlapped, mode 1,
|
||
|
|
wide U/S (F)
|
||
|
|
37 - G.992.3 Annex L POTS non-overlapped, mode 2,
|
||
|
|
narrow U/S(F)
|
||
|
|
38 - G.992.3 Annex L POTS overlapped, mode 3,
|
||
|
|
wide U/S (F)
|
||
|
|
39 - G.992.3 Annex L POTS overlapped, mode 4,
|
||
|
|
narrow U/S (F)
|
||
|
|
40 - G.992.3 Annex M POTS non-overlapped (F)
|
||
|
|
41 - G.992.3 Annex M POTS overlapped (F)
|
||
|
|
42 - G.992.5 POTS non-overlapped (F)
|
||
|
|
|
||
|
|
43 - G.992.5 POTS overlapped (F)
|
||
|
|
44 - G.992.5 ISDN non-overlapped (F)
|
||
|
|
45 - G.992.5 ISDN overlapped (F)
|
||
|
|
46-47 - Unused. Reserved for future ITU-T specification.
|
||
|
|
48 - G.992.5 Annex I All-Digital non-overlapped (F)
|
||
|
|
49 - G.992.5 Annex I All-Digital overlapped (F)
|
||
|
|
50 - G.992.5 Annex J All-Digital non-overlapped (F)
|
||
|
|
51 - G.992.5 Annex J All-Digital overlapped (F)
|
||
|
|
52 - G.992.5 Annex M POTS non-overlapped (F)
|
||
|
|
53 - G.992.5 Annex M POTS overlapped (F)
|
||
|
|
54-57 - Unused. Reserved for future ITU-T specification.
|
||
|
|
58 - G.993.2 Annex A
|
||
|
|
59 - G.993.2 Annex B
|
||
|
|
60 - G.993.2 Annex C
|
||
|
|
"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
defMode(1),
|
||
|
|
ansit1413(2),
|
||
|
|
etsi(3),
|
||
|
|
g9921PotsNonOverlapped(4),
|
||
|
|
g9921PotsOverlapped(5),
|
||
|
|
g9921IsdnNonOverlapped(6),
|
||
|
|
g9921isdnOverlapped(7),
|
||
|
|
g9921tcmIsdnNonOverlapped(8),
|
||
|
|
g9921tcmIsdnOverlapped(9),
|
||
|
|
g9922potsNonOverlapped(10),
|
||
|
|
g9922potsOverlapped(11),
|
||
|
|
g9922tcmIsdnNonOverlapped(12),
|
||
|
|
g9922tcmIsdnOverlapped(13),
|
||
|
|
g9921tcmIsdnSymmetric(14),
|
||
|
|
g9923PotsNonOverlapped(20),
|
||
|
|
g9923PotsOverlapped(21),
|
||
|
|
g9923IsdnNonOverlapped(22),
|
||
|
|
g9923isdnOverlapped(23),
|
||
|
|
g9924potsNonOverlapped(26),
|
||
|
|
g9924potsOverlapped(27),
|
||
|
|
g9923AnnexIAllDigNonOverlapped(30),
|
||
|
|
g9923AnnexIAllDigOverlapped(31),
|
||
|
|
g9923AnnexJAllDigNonOverlapped(32),
|
||
|
|
g9923AnnexJAllDigOverlapped(33),
|
||
|
|
g9924AnnexIAllDigNonOverlapped(34),
|
||
|
|
g9924AnnexIAllDigOverlapped(35),
|
||
|
|
g9923AnnexLMode1NonOverlapped(36),
|
||
|
|
g9923AnnexLMode2NonOverlapped(37),
|
||
|
|
g9923AnnexLMode3Overlapped(38),
|
||
|
|
g9923AnnexLMode4Overlapped(39),
|
||
|
|
g9923AnnexMPotsNonOverlapped(40),
|
||
|
|
g9923AnnexMPotsOverlapped(41),
|
||
|
|
|
||
|
|
g9925PotsNonOverlapped(42),
|
||
|
|
g9925PotsOverlapped(43),
|
||
|
|
g9925IsdnNonOverlapped(44),
|
||
|
|
g9925isdnOverlapped(45),
|
||
|
|
g9925AnnexIAllDigNonOverlapped(48),
|
||
|
|
g9925AnnexIAllDigOverlapped(49),
|
||
|
|
g9925AnnexJAllDigNonOverlapped(50),
|
||
|
|
g9925AnnexJAllDigOverlapped(51),
|
||
|
|
g9925AnnexMPotsNonOverlapped(52),
|
||
|
|
g9925AnnexMPotsOverlapped(53),
|
||
|
|
g9932AnnexA(58),
|
||
|
|
g9932AnnexB(59),
|
||
|
|
g9932AnnexC(60)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2PowerMngState ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Objects with this syntax uniquely identify each power
|
||
|
|
management state defined for the VDSL2/ADSL/ADSL2 or ADSL2+
|
||
|
|
link.
|
||
|
|
In VDSL2, only L0 and L3 states are defined.
|
||
|
|
The possible values are:
|
||
|
|
l0(1) - L0: Full power. Synchronized and
|
||
|
|
full transmission (i.e., Showtime).
|
||
|
|
l1(2) - L1: Low power with reduced net data rate
|
||
|
|
(for G.992.2 only).
|
||
|
|
l2(3) - L2: Low power with reduced net data rate
|
||
|
|
(for G.992.3, G.992.4 and G.992.5).
|
||
|
|
l3(4) - L3: Idle power management state / No
|
||
|
|
power."
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
l0(1),
|
||
|
|
l1(2),
|
||
|
|
l2(3),
|
||
|
|
l3(4)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2ConfPmsForce ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Objects with this syntax are configuration parameters
|
||
|
|
that specify the desired power management state transition
|
||
|
|
for the VDSL2/ADSL/ADSL2 or ADSL2+ link.
|
||
|
|
In VDSL2, only L0 and L3 states are defined:
|
||
|
|
l3toL0 (0) - Perform a transition from L3 to L0
|
||
|
|
(Full power management state).
|
||
|
|
|
||
|
|
l0toL2 (2) - Perform a transition from L0 to L2
|
||
|
|
(Low power management state).
|
||
|
|
l0orL2toL3 (3) - Perform a transition into L3 (Idle
|
||
|
|
power management state)."
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
l3toL0 (0),
|
||
|
|
l0toL2 (2),
|
||
|
|
l0orL2toL3 (3)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LinePmMode ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Objects with this syntax are configuration parameters
|
||
|
|
that reference the power modes/states into which the xTU-C or
|
||
|
|
xTU-R may autonomously transit.
|
||
|
|
|
||
|
|
It is a BITS structure that allows control of the following
|
||
|
|
transit options:
|
||
|
|
allowTransitionsToIdle (0) - xTU may autonomously transit
|
||
|
|
to idle (L3) state.
|
||
|
|
allowTransitionsToLowPower (1)- xTU may autonomously transit
|
||
|
|
to low-power (L1/L2)
|
||
|
|
state."
|
||
|
|
|
||
|
|
SYNTAX BITS {
|
||
|
|
allowTransitionsToIdle(0),
|
||
|
|
allowTransitionsToLowPower(1)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LineLdsf ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Objects with this syntax are configuration parameters
|
||
|
|
that control the Loop Diagnostic mode for a VDSL2/ADSL/ADSL2
|
||
|
|
or ADSL2+ link. The possible values are:
|
||
|
|
inhibit (0) - Inhibit Loop Diagnostic mode
|
||
|
|
force (1) - Force/Initiate Loop Diagnostic mode"
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
inhibit(0),
|
||
|
|
force(1)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LdsfResult ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
|
||
|
|
"Possible failure reasons associated with performing
|
||
|
|
Dual Ended Loop Test (DELT) on a DSL line.
|
||
|
|
Possible values are:
|
||
|
|
none (1) - The default value in case LDSF was never
|
||
|
|
requested for the associated line.
|
||
|
|
success (2) - The recent command completed
|
||
|
|
successfully.
|
||
|
|
inProgress (3) - The Loop Diagnostics process is in
|
||
|
|
progress.
|
||
|
|
unsupported (4) - The NE or the line card doesn't support
|
||
|
|
LDSF.
|
||
|
|
cannotRun (5) - The NE cannot initiate the command, due
|
||
|
|
to a nonspecific reason.
|
||
|
|
aborted (6) - The Loop Diagnostics process aborted.
|
||
|
|
failed (7) - The Loop Diagnostics process failed.
|
||
|
|
illegalMode (8) - The NE cannot initiate the command, due
|
||
|
|
to the specific mode of the relevant
|
||
|
|
line.
|
||
|
|
adminUp (9) - The NE cannot initiate the command, as
|
||
|
|
the relevant line is administratively
|
||
|
|
'Up'.
|
||
|
|
tableFull (10)- The NE cannot initiate the command, due
|
||
|
|
to reaching the maximum number of rows
|
||
|
|
in the results table.
|
||
|
|
noResources (11)- The NE cannot initiate the command, due
|
||
|
|
to lack of internal memory resources."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none (1),
|
||
|
|
success (2),
|
||
|
|
inProgress (3),
|
||
|
|
unsupported (4),
|
||
|
|
cannotRun (5),
|
||
|
|
aborted (6),
|
||
|
|
failed (7),
|
||
|
|
illegalMode (8),
|
||
|
|
adminUp (9),
|
||
|
|
tableFull (10),
|
||
|
|
noResources (11)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LineBpsc ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Objects with this syntax are configuration parameters
|
||
|
|
that control the bits per subcarrier measurement for a
|
||
|
|
VDSL2/ADSL/ADSL2 or ADSL2+ link. The possible values are:
|
||
|
|
idle (1) - Idle state
|
||
|
|
measure (2) - Measure the bits per subcarrier"
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
idle(1),
|
||
|
|
measure(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2BpscResult ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Possible failure reasons associated with performing
|
||
|
|
a bits per subcarrier measurement on a DSL line.
|
||
|
|
Possible values are:
|
||
|
|
|
||
|
|
none (1) - The default value, in case a measurement
|
||
|
|
was never requested for the associated
|
||
|
|
line.
|
||
|
|
success (2) - The recent measurement request completed
|
||
|
|
successfully.
|
||
|
|
inProgress (3) - The bits per subcarrier measurement is
|
||
|
|
in progress.
|
||
|
|
unsupported (4) - The bits per subcarrier request
|
||
|
|
mechanism is not supported.
|
||
|
|
failed (5) - The measurement request has failed and no
|
||
|
|
results are available.
|
||
|
|
noResources (6) - The NE cannot initiate the command, due
|
||
|
|
to lack of internal memory resources."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
none(1),
|
||
|
|
success(2),
|
||
|
|
inProgress(3),
|
||
|
|
unsupported(4),
|
||
|
|
failed(5),
|
||
|
|
noResources(6)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LineReset ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This type is used to request a line reset to occur.
|
||
|
|
idle (1) - This state indicates that there is
|
||
|
|
currently no request for a line reset.
|
||
|
|
reset (2) - This state indicates that a line reset
|
||
|
|
request has been issued."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
idle(1),
|
||
|
|
reset(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LineProfiles ::= TEXTUAL-CONVENTION
|
||
|
|
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Objects with this syntax reference the list of
|
||
|
|
ITU-T G.993.2 implementation profiles supported by an
|
||
|
|
xTU, enabled on the VDSL2 line or active on that line."
|
||
|
|
|
||
|
|
SYNTAX BITS {
|
||
|
|
profile8a(0),
|
||
|
|
profile8b(1),
|
||
|
|
profile8c(2),
|
||
|
|
profile8d(3),
|
||
|
|
profile12a(4),
|
||
|
|
profile12b(5),
|
||
|
|
profile17a(6),
|
||
|
|
profile30a(7)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LineClassMask ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"VDSL2 PSD Mask Class.
|
||
|
|
The limit Power Spectral Density masks are grouped in
|
||
|
|
the following PSD mask classes:
|
||
|
|
|
||
|
|
Class 998 Annex A: D-32, D-48, D-64, D-128.
|
||
|
|
Class 997-M1c Annex B: 997-M1c-A-7.
|
||
|
|
Class 997-M1x Annex B: 997-M1x-M-8, 997-M1x-M.
|
||
|
|
Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M,
|
||
|
|
997E17-M2x-NUS0, 997E30-M2x-NUS0.
|
||
|
|
Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0.
|
||
|
|
Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B,
|
||
|
|
998-M2x-NUS0, 998E17-M2x-NUS0,
|
||
|
|
998E17-M2x-NUS0-M, 998E30-M2x-NUS0,
|
||
|
|
998E30-M2x-NUS0-M.
|
||
|
|
Class 998ADE-M2x Annex B: Annex B: 998-M2x-A, 998-M2x-M,
|
||
|
|
998-M2x-B, 998-M2x-NUS0,
|
||
|
|
998ADE17-M2x-A, 998ADE17-M2x-B,
|
||
|
|
998ADE17-M2x-NUS0-M,
|
||
|
|
998ADE30-M2x-NUS0-A,
|
||
|
|
998ADE30-M2x-NUS0-M.
|
||
|
|
Class 998-B Annex C: POTS-138b, POTS-276b per C.2.1.1
|
||
|
|
in G.993.2, TCM-ISDN per C.2.1.2
|
||
|
|
in G.993.2.
|
||
|
|
Class 998-CO Annex C: POTS-138co, POTS-276co per C.2.1.1
|
||
|
|
in G.993.2.
|
||
|
|
Class HPE-M1 Annex B: HPE17-M1-NUS0, HPE30-M1-NUS0."
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
|
||
|
|
none(1),
|
||
|
|
a998ORb997M1cORc998B(2),
|
||
|
|
b997M1xOR998co(3),
|
||
|
|
b997M2x(4),
|
||
|
|
b998M1x(5),
|
||
|
|
b998M2x(6),
|
||
|
|
b998AdeM2x(7),
|
||
|
|
bHpeM1(8)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LineLimitMask ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The G.993.2 limit PSD mask for each class of profile.
|
||
|
|
The profiles are grouped in following profile classes:
|
||
|
|
- Class 8: Profiles 8a, 8b, 8c, 8d.
|
||
|
|
- Class 12: Profiles 12a, 12b.
|
||
|
|
- Class 17: Profile 17a.
|
||
|
|
- Class 30: Profile 30a."
|
||
|
|
|
||
|
|
SYNTAX BITS {
|
||
|
|
profile8Limit1(0),
|
||
|
|
profile8Limit2(1),
|
||
|
|
profile8Limit3(2),
|
||
|
|
profile8Limit4(3),
|
||
|
|
profile8Limit5(4),
|
||
|
|
profile8Limit6(5),
|
||
|
|
profile8Limit7(6),
|
||
|
|
profile8Limit8(7),
|
||
|
|
profile8Limit9(8),
|
||
|
|
profile8Limit10(9),
|
||
|
|
profile8Limit11(10),
|
||
|
|
profile8Limit12(11),
|
||
|
|
profile8Limit13(12),
|
||
|
|
profile8Limit14(13),
|
||
|
|
profile8Limit15(14),
|
||
|
|
profile8Limit16(15),
|
||
|
|
--
|
||
|
|
profile12Limit1(16),
|
||
|
|
profile12Limit2(17),
|
||
|
|
profile12Limit3(18),
|
||
|
|
profile12Limit4(19),
|
||
|
|
profile12Limit5(20),
|
||
|
|
profile12Limit6(21),
|
||
|
|
profile12Limit7(22),
|
||
|
|
profile12Limit8(23),
|
||
|
|
profile12Limit9(24),
|
||
|
|
profile12Limit10(25),
|
||
|
|
|
||
|
|
profile12Limit11(26),
|
||
|
|
profile12Limit12(27),
|
||
|
|
profile12Limit13(28),
|
||
|
|
profile12Limit14(29),
|
||
|
|
profile12Limit15(30),
|
||
|
|
profile12Limit16(31),
|
||
|
|
--
|
||
|
|
profile17Limit1(32),
|
||
|
|
profile17Limit2(33),
|
||
|
|
profile17Limit3(34),
|
||
|
|
profile17Limit4(35),
|
||
|
|
profile17Limit5(36),
|
||
|
|
profile17Limit6(37),
|
||
|
|
profile17Limit7(38),
|
||
|
|
profile17Limit8(39),
|
||
|
|
profile17Limit9(40),
|
||
|
|
profile17Limit10(41),
|
||
|
|
profile17Limit11(42),
|
||
|
|
profile17Limit12(43),
|
||
|
|
profile17Limit13(44),
|
||
|
|
profile17Limit14(45),
|
||
|
|
profile17Limit15(46),
|
||
|
|
profile17Limit16(47),
|
||
|
|
--
|
||
|
|
profile30Limit1(48),
|
||
|
|
profile30Limit2(49),
|
||
|
|
profile30Limit3(50),
|
||
|
|
profile30Limit4(51),
|
||
|
|
profile30Limit5(52),
|
||
|
|
profile30Limit6(53),
|
||
|
|
profile30Limit7(54),
|
||
|
|
profile30Limit8(55),
|
||
|
|
profile30Limit9(56),
|
||
|
|
profile30Limit10(57),
|
||
|
|
profile30Limit11(58),
|
||
|
|
profile30Limit12(59),
|
||
|
|
profile30Limit13(60),
|
||
|
|
profile30Limit14(61),
|
||
|
|
profile30Limit15(62),
|
||
|
|
profile30Limit16(63)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LineUs0Disable ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Indicates if US0 is disabled for each limit PSD mask.
|
||
|
|
The profiles are grouped in following profile classes:
|
||
|
|
- Class 8: Profiles 8a, 8b, 8c, 8d.
|
||
|
|
|
||
|
|
- Class 12: Profiles 12a, 12b.
|
||
|
|
- Class 17: Profile 17a.
|
||
|
|
- Class 30: Profile 30a."
|
||
|
|
|
||
|
|
SYNTAX BITS {
|
||
|
|
profile8Us0Disable1(0),
|
||
|
|
profile8Us0Disable2(1),
|
||
|
|
profile8Us0Disable3(2),
|
||
|
|
profile8Us0Disable4(3),
|
||
|
|
profile8Us0Disable5(4),
|
||
|
|
profile8Us0Disable6(5),
|
||
|
|
profile8Us0Disable7(6),
|
||
|
|
profile8Us0Disable8(7),
|
||
|
|
profile8Us0Disable9(8),
|
||
|
|
profile8Us0Disable10(9),
|
||
|
|
profile8Us0Disable11(10),
|
||
|
|
profile8Us0Disable12(11),
|
||
|
|
profile8Us0Disable13(12),
|
||
|
|
profile8Us0Disable14(13),
|
||
|
|
profile8Us0Disable15(14),
|
||
|
|
profile8Us0Disable16(15),
|
||
|
|
--
|
||
|
|
profile12Us0Disable1(16),
|
||
|
|
profile12Us0Disable2(17),
|
||
|
|
profile12Us0Disable3(18),
|
||
|
|
profile12Us0Disable4(19),
|
||
|
|
profile12Us0Disable5(20),
|
||
|
|
profile12Us0Disable6(21),
|
||
|
|
profile12Us0Disable7(22),
|
||
|
|
profile12Us0Disable8(23),
|
||
|
|
profile12Us0Disable9(24),
|
||
|
|
profile12Us0Disable10(25),
|
||
|
|
profile12Us0Disable11(26),
|
||
|
|
profile12Us0Disable12(27),
|
||
|
|
profile12Us0Disable13(28),
|
||
|
|
profile12Us0Disable14(29),
|
||
|
|
profile12Us0Disable15(30),
|
||
|
|
profile12Us0Disable16(31),
|
||
|
|
--
|
||
|
|
profile17Us0Disable1(32),
|
||
|
|
profile17Us0Disable2(33),
|
||
|
|
profile17Us0Disable3(34),
|
||
|
|
profile17Us0Disable4(35),
|
||
|
|
profile17Us0Disable5(36),
|
||
|
|
profile17Us0Disable6(37),
|
||
|
|
profile17Us0Disable7(38),
|
||
|
|
profile17Us0Disable8(39),
|
||
|
|
profile17Us0Disable9(40),
|
||
|
|
|
||
|
|
profile17Us0Disable10(41),
|
||
|
|
profile17Us0Disable11(42),
|
||
|
|
profile17Us0Disable12(43),
|
||
|
|
profile17Us0Disable13(44),
|
||
|
|
profile17Us0Disable14(45),
|
||
|
|
profile17Us0Disable15(46),
|
||
|
|
profile17Us0Disable16(47),
|
||
|
|
--
|
||
|
|
profile30Us0Disable1(48),
|
||
|
|
profile30Us0Disable2(49),
|
||
|
|
profile30Us0Disable3(50),
|
||
|
|
profile30Us0Disable4(51),
|
||
|
|
profile30Us0Disable5(52),
|
||
|
|
profile30Us0Disable6(53),
|
||
|
|
profile30Us0Disable7(54),
|
||
|
|
profile30Us0Disable8(55),
|
||
|
|
profile30Us0Disable9(56),
|
||
|
|
profile30Us0Disable10(57),
|
||
|
|
profile30Us0Disable11(58),
|
||
|
|
profile30Us0Disable12(59),
|
||
|
|
profile30Us0Disable13(60),
|
||
|
|
profile30Us0Disable14(61),
|
||
|
|
profile30Us0Disable15(62),
|
||
|
|
profile30Us0Disable16(63)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LineUs0Mask ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"The US0 PSD masks to be allowed by the near-end xTU on
|
||
|
|
the line. This parameter is only defined for G.993.2 Annex A.
|
||
|
|
It is represented as a bitmap (0 if not allowed and 1 if
|
||
|
|
allowed) with the following definitions."
|
||
|
|
|
||
|
|
SYNTAX BITS {
|
||
|
|
eu32(0),
|
||
|
|
eu36(1),
|
||
|
|
eu40(2),
|
||
|
|
eu44(3),
|
||
|
|
eu48(4),
|
||
|
|
eu52(5),
|
||
|
|
eu56(6),
|
||
|
|
eu60(7),
|
||
|
|
--
|
||
|
|
eu64(8),
|
||
|
|
eu128(9),
|
||
|
|
reserved1(10),
|
||
|
|
reserved2(11),
|
||
|
|
|
||
|
|
reserved3(12),
|
||
|
|
reserved4(13),
|
||
|
|
reserved5(14),
|
||
|
|
reserved6(15),
|
||
|
|
--
|
||
|
|
adlu32(16),
|
||
|
|
adlu36(17),
|
||
|
|
adlu40(18),
|
||
|
|
adlu44(19),
|
||
|
|
adlu48(20),
|
||
|
|
adlu52(21),
|
||
|
|
adlu56(22),
|
||
|
|
adlu60(23),
|
||
|
|
--
|
||
|
|
adlu64(24),
|
||
|
|
adlu128(25),
|
||
|
|
reserved7(26),
|
||
|
|
reserved8(27),
|
||
|
|
reserved9(28),
|
||
|
|
reserved10(29),
|
||
|
|
reserved11(30),
|
||
|
|
reserved12(31)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2SymbolProtection ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This type specifies the minimum impulse noise protection
|
||
|
|
for the bearer channel if it is transported over DMT symbols
|
||
|
|
with a subcarrier spacing of 4.3125 kHz.
|
||
|
|
The possible values are:
|
||
|
|
'noProtection' (i.e., INP not required), 'halfSymbol' (i.e., INP
|
||
|
|
length is 1/2 symbol), and 1-16 symbols in steps of 1
|
||
|
|
symbol."
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
noProtection (1),
|
||
|
|
halfSymbol (2),
|
||
|
|
singleSymbol (3),
|
||
|
|
twoSymbols (4),
|
||
|
|
threeSymbols (5),
|
||
|
|
fourSymbols (6),
|
||
|
|
fiveSymbols (7),
|
||
|
|
sixSymbols (8),
|
||
|
|
sevenSymbols (9),
|
||
|
|
eightSymbols (10),
|
||
|
|
nineSymbols (11),
|
||
|
|
tenSymbols (12),
|
||
|
|
|
||
|
|
elevenSymbols (13),
|
||
|
|
twelveSymbols (14),
|
||
|
|
thirteeSymbols (15),
|
||
|
|
fourteenSymbols (16),
|
||
|
|
fifteenSymbols (17),
|
||
|
|
sixteenSymbols (18)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2SymbolProtection8 ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This type specifies the minimum impulse noise protection
|
||
|
|
for the bearer channel if it is transported over DMT symbols
|
||
|
|
with a subcarrier spacing of 8.625 kHz.
|
||
|
|
The possible values are:
|
||
|
|
'noProtection' (i.e., INP not required) and 1-16 symbols in
|
||
|
|
steps of 1 symbol."
|
||
|
|
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
noProtection (1),
|
||
|
|
singleSymbol (2),
|
||
|
|
twoSymbols (3),
|
||
|
|
threeSymbols (4),
|
||
|
|
fourSymbols (5),
|
||
|
|
fiveSymbols (6),
|
||
|
|
sixSymbols (7),
|
||
|
|
sevenSymbols (8),
|
||
|
|
eightSymbols (9),
|
||
|
|
nineSymbols (10),
|
||
|
|
tenSymbols (11),
|
||
|
|
elevenSymbols (12),
|
||
|
|
twelveSymbols (13),
|
||
|
|
thirteeSymbols (14),
|
||
|
|
fourteenSymbols (15),
|
||
|
|
fifteenSymbols (16),
|
||
|
|
sixteenSymbols (17)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2MaxBer ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Objects with this syntax are configuration parameters
|
||
|
|
that reference the maximum Bit Error Rate (BER).
|
||
|
|
The possible values are:
|
||
|
|
eminus3 (1) - Maximum BER=E^-3
|
||
|
|
eminus5 (2) - Maximum BER=E^-5
|
||
|
|
eminus7 (3) - Maximum BER=E^-7"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
|
||
|
|
eminus3(1),
|
||
|
|
eminus5(2),
|
||
|
|
eminus7(3)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2ChInitPolicy ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This syntax serves for channel configuration parameters
|
||
|
|
that reference the channel initialization policy.
|
||
|
|
The possible values are:
|
||
|
|
policy0 (1) - Policy 0 according to the applicable standard.
|
||
|
|
policy1 (2) - Policy 1 according to the applicable
|
||
|
|
standard."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
policy0(1),
|
||
|
|
policy1(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2ScMaskDs ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each one of the 4096 bits in this OCTET STRING array
|
||
|
|
represents the corresponding subcarrier in the downstream
|
||
|
|
direction.
|
||
|
|
A bit value of one indicates that a subcarrier is masked."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..512))
|
||
|
|
|
||
|
|
Xdsl2ScMaskUs ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each one of the 4096 bits in this OCTET STRING array
|
||
|
|
represents the corresponding subcarrier in the upstream
|
||
|
|
direction. A bit value of one indicates that a subcarrier
|
||
|
|
is masked."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..512))
|
||
|
|
|
||
|
|
Xdsl2CarMask ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This type defines an array of bands. Each band is
|
||
|
|
represented by 4 octets and there is a maximum of 32 bands
|
||
|
|
allowed.
|
||
|
|
Each band consists of a 16-bit start subcarrier index followed by
|
||
|
|
a 16-bit stop subcarrier index.
|
||
|
|
The subcarrier index is an unsigned number in the range 0 to
|
||
|
|
NSC-1."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
||
|
|
|
||
|
|
Xdsl2RfiBands ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This type defines a subset of downstream PSD mask
|
||
|
|
breakpoints used to notch radio frequency interference (RFI)
|
||
|
|
bands.
|
||
|
|
Each RFI band is represented by 4 octets: a 16-bit start
|
||
|
|
subcarrier index followed by a 16-bit stop subcarrier
|
||
|
|
index.
|
||
|
|
There is a maximum of 16 RFI bands allowed.
|
||
|
|
The subcarrier index is an unsigned number in the range 0 to
|
||
|
|
NSC-1."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..64))
|
||
|
|
|
||
|
|
Xdsl2PsdMaskDs ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is a structure that represents up to 32 PSD mask
|
||
|
|
breakpoints.
|
||
|
|
Each breakpoint occupies 3 octets: The first
|
||
|
|
two octets hold the index of the subcarrier associated with the
|
||
|
|
breakpoint. The third octet holds the PSD reduction at the
|
||
|
|
breakpoint from 0 (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units
|
||
|
|
of 0.5 dBm/Hz.
|
||
|
|
The subcarrier index is an unsigned number in the range 0 to
|
||
|
|
NSCds-1."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..96))
|
||
|
|
|
||
|
|
Xdsl2PsdMaskUs ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is a structure that represents up to 16 PSD mask
|
||
|
|
breakpoints.
|
||
|
|
Each breakpoint occupies 3 octets: The first two octets hold the
|
||
|
|
index of the subcarrier associated with the breakpoint. The
|
||
|
|
third octet holds the PSD reduction at the breakpoint from 0
|
||
|
|
(0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of
|
||
|
|
0.5 dBm/Hz.
|
||
|
|
The subcarrier index is an unsigned number in the range 0 to
|
||
|
|
NSCus-1."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..48))
|
||
|
|
|
||
|
|
Xdsl2Tssi ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is a structure that represents up to 32 transmit
|
||
|
|
spectrum shaping (TSSi) breakpoints.
|
||
|
|
Each breakpoint is a pair of values occupying 3 octets with the
|
||
|
|
|
||
|
|
following structure:
|
||
|
|
First 2 octets - Index of the subcarrier used in the context of
|
||
|
|
the breakpoint.
|
||
|
|
Third octet - The shaping parameter at the breakpoint.
|
||
|
|
The shaping parameter value is in the range 0 to 126 (units of
|
||
|
|
-0.5 dB). The special value 127 indicates that the subcarrier is
|
||
|
|
not transmitted.
|
||
|
|
The subcarrier index is an unsigned number in the range 0 to
|
||
|
|
NSC-1."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..96))
|
||
|
|
|
||
|
|
Xdsl2LastTransmittedState ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This parameter represents the last successful transmitted
|
||
|
|
initialization state in the last full initialization performed
|
||
|
|
on the line. States are per the specific xDSL technology and
|
||
|
|
are numbered from 0 (if G.994.1 is used) or 1 (if G.994.1 is
|
||
|
|
not used) up to Showtime."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
-- ADSL family ATU-C side --
|
||
|
|
atucG9941(0),
|
||
|
|
atucQuiet1(1),
|
||
|
|
atucComb1(2),
|
||
|
|
atucQuiet2(3),
|
||
|
|
atucComb2(4),
|
||
|
|
atucIcomb1(5),
|
||
|
|
atucLineprob(6),
|
||
|
|
atucQuiet3(7),
|
||
|
|
atucComb3(8),
|
||
|
|
atucIComb2(9),
|
||
|
|
atucMsgfmt(10),
|
||
|
|
atucMsgpcb(11),
|
||
|
|
atucQuiet4(12),
|
||
|
|
atucReverb1(13),
|
||
|
|
atucTref1(14),
|
||
|
|
atucReverb2(15),
|
||
|
|
atucEct(16),
|
||
|
|
atucReverb3(17),
|
||
|
|
atucTref2(18),
|
||
|
|
atucReverb4(19),
|
||
|
|
atucSegue1(20),
|
||
|
|
atucMsg1(21),
|
||
|
|
atucReverb5(22),
|
||
|
|
atucSegue2(23),
|
||
|
|
atucMedley(24),
|
||
|
|
atucExchmarker(25),
|
||
|
|
atucMsg2(26),
|
||
|
|
|
||
|
|
atucReverb6(27),
|
||
|
|
atucSegue3(28),
|
||
|
|
atucParams(29),
|
||
|
|
atucReverb7(30),
|
||
|
|
atucSegue4(31),
|
||
|
|
atucShowtime(32),
|
||
|
|
-- ADSL family ATU-R side --
|
||
|
|
aturG9941(100),
|
||
|
|
aturQuiet1(101),
|
||
|
|
aturComb1(102),
|
||
|
|
aturQuiet2(103),
|
||
|
|
aturComb2(104),
|
||
|
|
aturIcomb1(105),
|
||
|
|
aturLineprob(106),
|
||
|
|
aturQuiet3(107),
|
||
|
|
aturComb3(108),
|
||
|
|
aturIcomb2(109),
|
||
|
|
aturMsgfmt(110),
|
||
|
|
aturMsgpcb(111),
|
||
|
|
aturReverb1(112),
|
||
|
|
aturQuiet4(113),
|
||
|
|
aturReverb2(114),
|
||
|
|
aturQuiet5(115),
|
||
|
|
aturReverb3(116),
|
||
|
|
aturEct(117),
|
||
|
|
aturReverb4(118),
|
||
|
|
aturSegue1(119),
|
||
|
|
aturReverb5(120),
|
||
|
|
aturSegue2(121),
|
||
|
|
aturMsg1(122),
|
||
|
|
aturMedley(123),
|
||
|
|
aturExchmarker(124),
|
||
|
|
aturMsg2(125),
|
||
|
|
aturReverb6(126),
|
||
|
|
aturSegue3(127),
|
||
|
|
aturParams(128),
|
||
|
|
aturReverb7(129),
|
||
|
|
aturSegue4(130),
|
||
|
|
aturShowtime(131),
|
||
|
|
-- VDSL2 VTU-C side --
|
||
|
|
vtucG9941(200),
|
||
|
|
vtucQuiet1(201),
|
||
|
|
vtucChDiscov1(202),
|
||
|
|
vtucSynchro1(203),
|
||
|
|
vtucPilot1(204),
|
||
|
|
vtucQuiet2(205),
|
||
|
|
vtucPeriodic1(206),
|
||
|
|
vtucSynchro2(207),
|
||
|
|
|
||
|
|
vtucChDiscov2(208),
|
||
|
|
vtucSynchro3(209),
|
||
|
|
vtucTraining1(210),
|
||
|
|
vtucSynchro4(211),
|
||
|
|
vtucPilot2(212),
|
||
|
|
vtucTeq(213),
|
||
|
|
vtucEct(214),
|
||
|
|
vtucPilot3(215),
|
||
|
|
vtucPeriodic2(216),
|
||
|
|
vtucTraining2(217),
|
||
|
|
vtucSynchro5(218),
|
||
|
|
vtucMedley(219),
|
||
|
|
vtucSynchro6(220),
|
||
|
|
vtucShowtime(221),
|
||
|
|
-- VDSL2 VTU-R side --
|
||
|
|
vturG9941(300),
|
||
|
|
vturQuiet1(301),
|
||
|
|
vturChDiscov1(302),
|
||
|
|
vturSynchro1(303),
|
||
|
|
vturLineprobe(304),
|
||
|
|
vturPeriodic1(305),
|
||
|
|
vturSynchro2(306),
|
||
|
|
vturChDiscov2(307),
|
||
|
|
vturSynchro3(308),
|
||
|
|
vturQuiet2(309),
|
||
|
|
vturTraining1(310),
|
||
|
|
vturSynchro4(311),
|
||
|
|
vturTeq(312),
|
||
|
|
vturQuiet3(313),
|
||
|
|
vturEct(314),
|
||
|
|
vturPeriodic2(315),
|
||
|
|
vturTraining2(316),
|
||
|
|
vturSynchro5(317),
|
||
|
|
vturMedley(318),
|
||
|
|
vturSynchro6(319),
|
||
|
|
vturShowtime(320)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LineStatus ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Objects with this syntax are status parameters
|
||
|
|
that reflect the failure status for a given endpoint of a
|
||
|
|
VDSL2/ADSL/ADSL2 or ADSL2+ link.
|
||
|
|
|
||
|
|
This BITS structure can report the following failures:
|
||
|
|
|
||
|
|
noDefect (0) - This bit position positively reports
|
||
|
|
|
||
|
|
that no defect or failure exist.
|
||
|
|
lossOfFraming (1) - Loss of frame synchronization.
|
||
|
|
lossOfSignal (2) - Loss of signal.
|
||
|
|
lossOfPower (3) - Loss of power. Usually this failure may
|
||
|
|
be reported for CPE units only.
|
||
|
|
initFailure (4) - Recent initialization process failed.
|
||
|
|
Never active on xTU-R."
|
||
|
|
SYNTAX BITS {
|
||
|
|
noDefect(0),
|
||
|
|
lossOfFraming(1),
|
||
|
|
lossOfSignal(2),
|
||
|
|
lossOfPower(3),
|
||
|
|
initFailure(4)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2ChInpReport ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This type is used to indicate the method used to compute the
|
||
|
|
Actual Impulse Noise Protection (ACTINP). If set to
|
||
|
|
'inpComputedUsingFormula', the ACTINP is computed
|
||
|
|
according to the INP_no_erasure formula (9.6/G.993.2).
|
||
|
|
If set to 'inpEstimatedByXtur', the ACTINP is the value
|
||
|
|
estimated by the xTU receiver.
|
||
|
|
inpComputedUsingFormula (1) - ACTINP computed using
|
||
|
|
INP_no_erasure formula.
|
||
|
|
inpEstimatedByXtur (2) - ACTINP estimated by
|
||
|
|
the xTU receiver."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
inpComputedUsingFormula(1),
|
||
|
|
inpEstimatedByXtur(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2ChAtmStatus ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Objects with this syntax are status parameters that
|
||
|
|
reflect the failure status for the Transmission Convergence (TC)
|
||
|
|
layer of a given ATM interface (data path over a VDSL2/ADSL/
|
||
|
|
ADSL2 or ADSL2+ link).
|
||
|
|
|
||
|
|
This BITS structure can report the following failures:
|
||
|
|
noDefect (0) - This bit position positively
|
||
|
|
reports that no defect or failure
|
||
|
|
exists.
|
||
|
|
noCellDelineation (1) - The link was successfully
|
||
|
|
initialized, but cell delineation
|
||
|
|
was never acquired on the
|
||
|
|
|
||
|
|
associated ATM data path.
|
||
|
|
lossOfCellDelineation (2)- Loss of cell delineation on the
|
||
|
|
associated ATM data path."
|
||
|
|
SYNTAX BITS {
|
||
|
|
noDefect(0),
|
||
|
|
noCellDelineation(1),
|
||
|
|
lossOfCellDelineation(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2ChPtmStatus ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Objects with this syntax are status parameters that
|
||
|
|
reflect the failure status for a given PTM interface (packet
|
||
|
|
data path over a VDSL2/ADSL/ADSL2 or ADSL2+ link).
|
||
|
|
|
||
|
|
This BITS structure can report the following failures:
|
||
|
|
noDefect (0) - This bit position positively
|
||
|
|
reports that no defect or failure exists.
|
||
|
|
outOfSync (1) - Out of synchronization."
|
||
|
|
SYNTAX BITS {
|
||
|
|
noDefect(0),
|
||
|
|
outOfSync(1)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2UpboKLF ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Defines the upstream power backoff force mode (UPBOKLF).
|
||
|
|
The three possible mode values are:
|
||
|
|
auto(1) - The VDSL Transceiver Unit (VTUs) will
|
||
|
|
autonomously determine the
|
||
|
|
electrical length.
|
||
|
|
override(2) - Forces the VTU-R to use the electrical
|
||
|
|
length, kl0, of the CO-MIB (UPBOKL) to
|
||
|
|
compute the UPBO.
|
||
|
|
disableUpbo(3) - Disables UPBO such that UPBO is not
|
||
|
|
utilized."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
auto(1),
|
||
|
|
override(2),
|
||
|
|
disableUpbo(3)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2BandUs ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Each value identifies a specific band in the upstream
|
||
|
|
|
||
|
|
transmission direction (excluding the US0 band.).
|
||
|
|
The possible values that identify a band are as follows:
|
||
|
|
us1(5) - Upstream band number 1 (US1).
|
||
|
|
us2(7) - Upstream band number 2 (US2).
|
||
|
|
us3(9) - Upstream band number 3 (US3).
|
||
|
|
us4(11) - Upstream band number 4 (US4)."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
us1(5),
|
||
|
|
us2(7),
|
||
|
|
us3(9),
|
||
|
|
us4(11)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LinePsdMaskSelectUs ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This type is used to define which upstream PSD mask is
|
||
|
|
enabled. This type is used only for Annexes J and M of ITU-T
|
||
|
|
Recommendations G.992.3 and G.992.5.
|
||
|
|
|
||
|
|
adlu32Eu32 (1), - ADLU-32 / EU-32
|
||
|
|
adlu36Eu36 (2), - ADLU-36 / EU-36
|
||
|
|
adlu40Eu40 (3), - ADLU-40 / EU-40
|
||
|
|
adlu44Eu44 (4), - ADLU-44 / EU-44
|
||
|
|
adlu48Eu48 (5), - ADLU-48 / EU-48
|
||
|
|
adlu52Eu52 (6), - ADLU-52 / EU-52
|
||
|
|
adlu56Eu56 (7), - ADLU-56 / EU-56
|
||
|
|
adlu60Eu60 (8), - ADLU-60 / EU-60
|
||
|
|
adlu64Eu64 (9) - ADLU-64 / EU-64"
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
adlu32Eu32(1),
|
||
|
|
adlu36Eu36(2),
|
||
|
|
adlu40Eu40(3),
|
||
|
|
adlu44Eu44(4),
|
||
|
|
adlu48Eu48(5),
|
||
|
|
adlu52Eu52(6),
|
||
|
|
adlu56Eu56(7),
|
||
|
|
adlu60Eu60(8),
|
||
|
|
adlu64Eu64(9)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LineCeFlag ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This type is used to enable the use of the optional
|
||
|
|
cyclic extension values. If the bit is set to '1', the optional
|
||
|
|
cyclic extension values may be used. Otherwise, the cyclic
|
||
|
|
extension shall be forced to the mandatory length (5N/32).
|
||
|
|
|
||
|
|
enableCyclicExtension (0) - Enable use of optional
|
||
|
|
Cyclic Extension values."
|
||
|
|
SYNTAX BITS {
|
||
|
|
enableCyclicExtension(0)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LineSnrMode ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This type is used to enable the transmitter-referred
|
||
|
|
virtual noise. The value of 1, indicates that virtual
|
||
|
|
noise is disabled. The value of 2, indicates that virtual
|
||
|
|
noise is enabled.
|
||
|
|
|
||
|
|
virtualNoiseDisabled (1) - virtual noise is disabled.
|
||
|
|
virtualNoiseEnabled (2) - virtual noise is enabled."
|
||
|
|
SYNTAX INTEGER {
|
||
|
|
virtualNoiseDisabled(1),
|
||
|
|
virtualNoiseEnabled(2)
|
||
|
|
}
|
||
|
|
|
||
|
|
Xdsl2LineTxRefVnDs ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is a structure that represents up to 32 PSD mask
|
||
|
|
breakpoints.
|
||
|
|
Each breakpoint occupies 3 octets: The first two octets hold the
|
||
|
|
index of the subcarrier associated with the breakpoint. The
|
||
|
|
third octet holds the PSD reduction at the breakpoint from 0
|
||
|
|
(-140 dBm/Hz) to 200 (-40 dBm/Hz) using units of 0.5 dBm/Hz.
|
||
|
|
A special value of 255 indicates a noise level of 0 W/Hz.
|
||
|
|
The subcarrier index is an unsigned number in the range 0 to
|
||
|
|
NSCds-1."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..96))
|
||
|
|
|
||
|
|
Xdsl2LineTxRefVnUs ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This is a structure that represents up to 16 PSD mask
|
||
|
|
breakpoints.
|
||
|
|
Each breakpoint occupies 3 octets: The first two octets hold the
|
||
|
|
index of the subcarrier associated with the breakpoint. The
|
||
|
|
third octet holds the PSD reduction at the breakpoint from 0
|
||
|
|
(-140 dBm/Hz) to 200 (-40 dBm/Hz) using units of 0.5 dBm/Hz.
|
||
|
|
A special value of 255 indicates a noise level of 0 W/Hz.
|
||
|
|
The subcarrier index is an unsigned number in the range 0 to
|
||
|
|
NSCus-1."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..48))
|
||
|
|
|
||
|
|
Xdsl2BitsAlloc ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"This type specifies an array of nibbles, where each nibble
|
||
|
|
indicates the bits allocation for a subcarrier.
|
||
|
|
Each nibble has a value in the range 0 to 15 to indicate
|
||
|
|
the bits allocation."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..256))
|
||
|
|
|
||
|
|
Xdsl2MrefPsdDs ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Objects with this syntax are MEDLEY Reference PSD status
|
||
|
|
parameters in the downstream direction. This is expressed as
|
||
|
|
the set of
|
||
|
|
breakpoints exchanged at initialization.
|
||
|
|
The OCTET STRING contains up to 48 pairs of values in the
|
||
|
|
following structure:
|
||
|
|
Octets 0-1 -- Index of the first subcarrier used in the
|
||
|
|
context of a first breakpoint.
|
||
|
|
Octets 2-3 -- The PSD level for the subcarrier indicated
|
||
|
|
in octets 0-1.
|
||
|
|
Octets 4-7 -- Same, for a second breakpoint
|
||
|
|
Octets 8-11 -- Same, for a third breakpoint
|
||
|
|
And so on until
|
||
|
|
Octets 188-191 -- Same, for a 48th breakpoint.
|
||
|
|
The subcarrier index is an unsigned number in the range 0
|
||
|
|
to NSCds-1.
|
||
|
|
The PSD level is an integer value in the 0 to 4095 range. It is
|
||
|
|
represented in units of 0.1 dB offset from -140 dBm/Hz."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..192))
|
||
|
|
|
||
|
|
Xdsl2MrefPsdUs ::= TEXTUAL-CONVENTION
|
||
|
|
STATUS current
|
||
|
|
DESCRIPTION
|
||
|
|
"Objects with this syntax are MEDLEY Reference PSD status
|
||
|
|
parameters in the upstream direction. This is expressed
|
||
|
|
as the set of
|
||
|
|
breakpoints exchanged at initialization.
|
||
|
|
The OCTET STRING contains up to 32 pairs of values in the
|
||
|
|
following structure:
|
||
|
|
Octets 0-1 -- Index of the first subcarrier used in the
|
||
|
|
context of a first breakpoint.
|
||
|
|
Octets 2-3 -- The PSD level for the subcarrier indicated
|
||
|
|
in octets 0-1.
|
||
|
|
Octets 4-7 -- Same, for a second breakpoint
|
||
|
|
Octets 8-11 -- Same, for a third breakpoint
|
||
|
|
And so on until
|
||
|
|
|
||
|
|
Octets 124-127 -- Same, for a 32nd breakpoint.
|
||
|
|
The subcarrier index is an unsigned number in the range 0
|
||
|
|
to NSCus-1.
|
||
|
|
The PSD level is an integer value in the 0 to 4095 range. It is
|
||
|
|
represented in units of 0.1 dB offset from -140 dBm/Hz."
|
||
|
|
SYNTAX OCTET STRING (SIZE(0..128))
|
||
|
|
|
||
|
|
END
|