mibs/MIBS/adtran/ADTRAN-AOS-NETWORK-SYNC-MIB

192 lines
7.0 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
ADTRAN-AOS-NETWORK-SYNC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32,
OBJECT-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
adIdentity
FROM ADTRAN-MIB
adGenAOSConformance, adGenAOSCommon
FROM ADTRAN-AOS;
adGenAOSNetSyncMib MODULE-IDENTITY
LAST-UPDATED "201509180000Z"
ORGANIZATION "ADTRAN, Inc."
CONTACT-INFO
" Technical Support Dept.
Postal: ADTRAN, Inc.
901 Explorer Blvd.
Huntsville, AL 35806
Tel: +1 800 726-8663
Fax: +1 256 963 6217
E-mail: support@adtran.com"
DESCRIPTION
"The MIB module defines Network Sync configuration information and traps for AdtranOS products."
REVISION "201509180000Z" -- September 18, 2015
DESCRIPTION "The following changes have been made in this version:
1. Add a trap for the T4 interface output squelch."
REVISION "201403050000Z" -- March 5, 2014
DESCRIPTION "The following changes have been made in this version:
1. Removed the LTI State from the clock defects trap.
2. Added a new trap for the LTI State change."
REVISION "201311070000Z" -- November 7, 2013 / YYYYMMDDHHMMZ
DESCRIPTION
"Created the adGenAosNetSync MIB. Revision R10.11"
::= { adIdentity 10000 53 1 9 }
adGenAOSNetSync OBJECT IDENTIFIER ::= { adGenAOSCommon 9 }
adGenAOSNetSyncTrap OBJECT IDENTIFIER ::= { adGenAOSNetSync 0 }
adGenAOSNetSyncTrapControl OBJECT IDENTIFIER ::= { adGenAOSNetSync 1 }
adGenAOSNetSyncInfo OBJECT IDENTIFIER ::= { adGenAOSNetSync 2 }
adGenAOSNetSyncTrapEnable OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates whether the system produces
the Network Sync trap."
DEFVAL { disabled }
::= { adGenAOSNetSyncTrapControl 1 }
adGenAOSNetSyncLTIState OBJECT-TYPE
SYNTAX INTEGER { inactive(1), active(2) }
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A numerical representation of the chassis's LTI(Loss of Timing Info) state."
::= { adGenAOSNetSyncInfo 1 }
adGenAOSNetSyncClockNumber OBJECT-TYPE
SYNTAX INTEGER { primary(1), secondary(2) }
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A numerical representation of the chassis's Network Sync Clock source."
::= { adGenAOSNetSyncInfo 2 }
adGenAOSNetSyncClockDefectStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This variable indicates the Network Sync clock defect status.
The adGenAOSNetSyncClockDefectStatus is a bit map represented as a
sum, therefore, it can represent multiple defects simultaneously.
Bit 1 which represents no defects must be set if and only if no other
bits are set.
The various bit positions are:
1 NONE No defects
2 LOS Loss of signal
4 EFD Exceeded frequency deviation
8 LO_ESMC Loss of ESMC
16 QL_FAILED Quality level failed "
::= { adGenAOSNetSyncInfo 3 }
adGenAOSNetSyncT4SquelchState OBJECT-TYPE
SYNTAX INTEGER { inactive(1), active(2) }
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A numerical representation of the T4 interface squelch state."
::= { adGenAOSNetSyncInfo 4 }
adGenAOSNetSyncClockDefectTrap NOTIFICATION-TYPE
OBJECTS { adGenAOSNetSyncClockNumber, adGenAOSNetSyncClockDefectStatus }
STATUS current
DESCRIPTION
"A Network Sync trap signifies a change in clock defect status."
::= { adGenAOSNetSyncTrap 1 }
adGenAOSNetSyncLTIStateChangeTrap NOTIFICATION-TYPE
OBJECTS { adGenAOSNetSyncLTIState }
STATUS current
DESCRIPTION
"A Network Sync trap signifies a change in Loss of timing state."
::= { adGenAOSNetSyncTrap 2 }
adGenAOSNetSyncT4SquelchStateChangeTrap NOTIFICATION-TYPE
OBJECTS { adGenAOSNetSyncT4SquelchState }
STATUS current
DESCRIPTION
"A Network Sync trap signifies a change in T4 interface squelch state."
::= { adGenAOSNetSyncTrap 3 }
-- Conformance information
--
adGenAOSNetSyncConformance OBJECT IDENTIFIER
::= { adGenAOSConformance 18 }
adGenAOSNetSyncGroups OBJECT IDENTIFIER
::= { adGenAOSNetSyncConformance 1 }
adGenAOSNetSyncCompliances OBJECT IDENTIFIER
::= { adGenAOSNetSyncConformance 2 }
-- Compliance statements
--
-- Full compliance statement
adGenAOSNetSyncFullCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement
version 2 of the adGenAosNetSync MIB. When this MIB is implemented
with support for read-write, then such an implementation can claim
full compliance."
MODULE -- this module
GROUP adGenAOSNetSyncTrapCfgGroup
DESCRIPTION
"A collection of objects providing configuration for the Network Sync trap."
GROUP adGenAOSNetSyncTrapGroup
DESCRIPTION
"This group is used for the management of
asynchronous notifications of Network Sync traps."
GROUP adGenAOSNetSyncNotificationGroup
DESCRIPTION
"This optional group defines the asynchronous
notifications generated by Network Sync traps."
::= { adGenAOSNetSyncCompliances 1 }
adGenAOSNetSyncTrapCfgGroup OBJECT-GROUP
OBJECTS {
adGenAOSNetSyncTrapEnable
}
STATUS current
DESCRIPTION
"This group contains the objects necessary to enable/disable
NetSync failure traps."
::= { adGenAOSNetSyncGroups 1 }
adGenAOSNetSyncTrapGroup OBJECT-GROUP
OBJECTS {
adGenAOSNetSyncLTIState,
adGenAOSNetSyncClockNumber,
adGenAOSNetSyncClockDefectStatus,
adGenAOSNetSyncT4SquelchState
}
STATUS current
DESCRIPTION
"The objects necessary to control NetSync notification messages."
::= { adGenAOSNetSyncGroups 2 }
adGenAOSNetSyncNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { adGenAOSNetSyncClockDefectTrap, adGenAOSNetSyncLTIStateChangeTrap, adGenAOSNetSyncT4SquelchStateChangeTrap }
STATUS current
DESCRIPTION
"Traps which may be used to enhance event driven
management of the chassis's Network Sync."
::= { adGenAOSNetSyncGroups 3 }
END