mibs/MIBS/alteonos/ALTEON-TIGON-SWITCH-MIB

1810 lines
47 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- COPYRIGHT NOTICE
-- Copyright (c) Alteon WebSystems, Inc. 2001
-- All rights reserved
--
-- HISTORY
-- $Log: tigonSwitch.mib,v $
-- Revision 1.1.1.1 2004/11/01 16:55:42 maxbaker
-- initial import
--
-- Revision ts10_rrekha/2 2002/04/05 02:42:44 rrekha
-- Fixed 217841: Changed descprition for agImageVer1 and agImageVer2 to
-- include new version digit.
--
-- Revision ge_rrekha/4 2001/10/31 00:06:12 rrekha
-- Fixed 13656: Remove syslog group for PM and AOL DPS.
--
-- Revision ge_rrekha/2 2001/10/26 01:12:31 rrekha
-- Update the description with information on the placement of the
-- sensors.
--
-- Revision genie_rekha/23 2001/07/07 02:26:22 rekha
-- For SNMP added ability to enable/disable syslog for SYN attack
-- detection and TCP rate limiting.
--
-- Revision genie_rekha/21 2001/06/20 19:52:34 rekha
-- Moved SYN attack detection under serverloadbalance to be consistent
-- with CLI.
--
-- Revision genie_rekha/19 2001/06/19 21:54:58 rekha
-- Added MIB objects to support SYN attack detection.
--
-- Revision genie_rekha/17 2001/05/25 00:11:10 rekha
-- Removed 'other' from enumerations.
--
-- Revision genie_rekha/15 2001/05/18 00:12:23 rekha
-- CR11597: Changed the enum for agClrSyslogMsgs to start with a 1
-- instead of 0 as enumerations should not have a number with vlaue 0
-- per RFC1155.
--
-- Revision test_smiao/5 2001/05/07 21:46:36 smiao
-- Added syslog/trap features in webUI and SNMP.
--
-- Revision genie_rekha/12 2001/04/25 22:24:10 rekha
-- Fixed CR11327: Added MIB object for RURL key.
--
-- Revision jbLatest_jbuswell/4 2001/04/23 19:21:25 jbuswell
-- CR#11147: Added to the description of agSoftwareVersion to include new
-- version digit.
--
-- Revision astro2_mmac/3 2001/04/11 17:36:53 mmac
-- add object adSlotNumber; this object is holds the chassis slot number
-- of the 780 WSM4 blade.
--
-- Revision work_rmundhra/8 2001/03/27 00:43:21 rmundhra
-- Fixed 11047:Aceview(EMS)need individual software keys to
-- be instrumented.
-- Added entries agEnabledGslbKey and agEnabledBwmKey.
--
-- Revision test_smiao/3 2001/03/21 23:24:43 smiao
-- Removed duplicate registration, private-mibs and switch definitions.
-- Added IMPORTS switch FROM ALTEON-ROOT-MIB.
--
-- Revision jbLatest_jbuswell/2 2001/03/15 22:10:06 jbuswell
-- Defect 10731: Added agClrSyslogMsgs, changed OID of agSavePending due
-- to conflict.
--
-- Revision work_rmundhra/4 2001/03/06 23:11:49 rmundhra
-- Added SNMP support for NTP.
--
-- Revision genie_rekha/10 2001/02/28 21:58:54 rekha
-- Added SNMP support for management network and mask.
--
-- Revision work_rmundhra/2 2001/02/27 22:53:59 rmundhra
-- Fixed 10217: (Agent) Aceview does not show console enabled/disabled
-- console output syslog messages but in CLI under syslog menu it shows
-- this feature.
-- Added entries agCurCfgConsole & agNewCfgConsole to mib.
--
-- Revision genie_rekha/7 2001/02/16 00:11:24 rekha
-- Fixed 10218: Added MIB objects for radius telnet.
--
-- Revision genie_rekha/4 2001/02/09 01:18:17 rekha
-- Added MIB object agSavePending. This fixes CR# 5096
--
-- Revision genie_rekha/2 2001/02/08 18:18:03 rekha
-- As part of the code cleanup split the Tigon MIB into smaller
-- modules. Instead of altswitch.mib these 5 new modules should be
-- used.
--
-- $EndLog$
--
-- Version 10.0.x
--
ALTEON-TIGON-SWITCH-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, mgmt, NetworkAddress, IpAddress, Counter, Gauge
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
PhysAddress, DisplayString
FROM RFC1213-MIB
switch
FROM ALTEON-ROOT-MIB;
-- groups in private-mibs
hardware OBJECT IDENTIFIER ::= { switch 1 }
agent OBJECT IDENTIFIER ::= { switch 2 }
stats OBJECT IDENTIFIER ::= { switch 8 }
information OBJECT IDENTIFIER ::= { switch 9 }
altswitchTraps OBJECT IDENTIFIER ::= { switch 13 }
operCmds OBJECT IDENTIFIER ::= { switch 14 }
radius OBJECT IDENTIFIER ::= { switch 16 }
agGeneral OBJECT IDENTIFIER ::= { agent 1 }
agGeneralConfig OBJECT IDENTIFIER ::= { agent 2 }
memStats OBJECT IDENTIFIER ::= { stats 12 }
pktStats OBJECT IDENTIFIER ::= { stats 13 }
mpCpuStats OBJECT IDENTIFIER ::= { stats 16 }
-- There are two configuration blocks for Alteon switches.
-- The "current_config" reflects the configuration parameters that the
-- switch is operating on and it is read-only. The objects with "CurCfg"
-- in the name are reflect to this configuration block.
--
-- The "new_config" accepts user configurations on set. The objects with
-- "NewCfg" in the name are reflect to this configuration block.
--
-- The newly set configurations will not take effect until a "apply"
-- command has been issued (See agApplyConfiguration object defined in
-- ALTEON-PRIVATE-MIBS).
--
-- The newly set configurations will not be saved through next restarting
-- of the switch unless a "save" command has been issued (See
-- agSaveConfiguration object defined in ALTEON-PRIVATE-MIBS).
-- Hardware Information
hwPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware part number of the Alteon Switch."
::= { hardware 1 }
hwRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hardware revision. If the revision is not
available, a zero length string should be returned."
::= { hardware 2 }
hwPowerSupplyStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
bad(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the internal power supply."
::= { hardware 3 }
hwRedundantPSPresent OBJECT-TYPE
SYNTAX INTEGER {
notPresent(3),
present(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Existence of redundant power supply."
::= { hardware 4 }
hwRedundantPSStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
bad(2),
notPresent(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the redundant power supply."
::= { hardware 5 }
hwSensor1Temp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the rear left sensor in degrees Celsius."
::= { hardware 6 }
hwSensor2Temp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the rear middle sensor in degrees Celsius."
::= { hardware 7 }
hwSensor3Temp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the front middle sensor in degrees Celsius."
::= { hardware 8 }
hwSensor4Temp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The temperature of the front right sensor in degrees Celsius."
::= { hardware 9 }
-- Agent General Group
-- This group of objects take effect on the 'SET' request.
-- There is no need to 'apply' or 'save'.
agSaveConfiguration OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
saveActive(2),
notSaveActive(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is an action object to write current configuration to
nonvolatile storage.
When issued with the saveActive, the active configuration
in flash is saved to backup in flash and then the new
configuration is saved to the active configuration in flash.
When issued with notSaveActive, the active configuration
is NOT saved to the flash and the active configuration is
overwritten with the new configuration.
ok(1) is returned always when read."
::= { agGeneral 1 }
agApplyConfiguration OBJECT-TYPE
SYNTAX INTEGER {
other(1),
apply(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is an action object to apply the changes made to configuration
of the switch. By setting the value to apply(2), all the changes
made since the last apply are written to the new_config block.
other(1) is returned when this object ie read. "
::= { agGeneral 2 }
agApplyPending OBJECT-TYPE
SYNTAX INTEGER {
applyNeeded(2),
noApplyNeeded(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object, when read, gives the user information
whether an apply action is needed and that the configuration
has been chaged by the user actions. The user then can
apply the changes by setting proper value to the object
agApplyConfiguration described above."
::= { agGeneral 3 }
agReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
coldReset(2),
warmReset(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is an action object to reboot the agent.
other(1) is returned always when read.
The following values are writable:
coldReset(2)...
warmReset(3)..."
::= { agGeneral 4 }
agConfigForNxtReset OBJECT-TYPE
SYNTAX INTEGER {
active(2),
backup(3),
default(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration block"
::= { agGeneral 5 }
agImageForNxtReset OBJECT-TYPE
SYNTAX INTEGER {
image1(2),
image2(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2"
::= { agGeneral 6 }
agSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not available."
::= { agGeneral 7 }
agBootVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available."
::= { agGeneral 8 }
agImage1Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the software image stored in image 1 storage in the
form of 'major.minor.maintenance.bugfix'. A zero length string is
returned if version is not available or there is no valid
software image."
::= { agGeneral 9 }
agImage2Ver OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the software image stored in image 2 storage in the
form of 'major.minor.maintenance.bugfix'. A zero length string is
returned if version is not available or there is no valid software
image."
::= { agGeneral 10 }
agRtcDate OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The date on the real time clock in the form of 'mm/dd/yy'.
A zero length string is returned if date is not available."
::= { agGeneral 11 }
agRtcTime OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The time on the real time clock in the form of 'hh:mm:ss'.
A zero length string is returned if time is not available."
::= { agGeneral 12 }
agTftpServerIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The TFTP server IP address."
::= { agGeneral 13 }
agTftpImageFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The image file name to be downloaded."
::= { agGeneral 14 }
agTftpImage OBJECT-TYPE
SYNTAX INTEGER {
image1(2),
image2(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Whether the image file should be loaded in image1 or image2 in flash."
::= { agGeneral 15 }
agTftpDownload OBJECT-TYPE
SYNTAX INTEGER {
other(1),
download(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is an action object to cause to download software image
according to the setup of agTftpServerIpAddr, agTftpImageFileName,
agTftpImage when download(2) is issued.
other(1) is returned always when read."
::= { agGeneral 16 }
agLastSetErrorReason OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..256))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The error reason of the last SET failure."
::= { agGeneral 17 }
agTftpServer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The TFTP server IP address or domain name."
::= { agGeneral 18 }
agTftpCfgFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The configuration file name."
::= { agGeneral 19 }
agTftpDumpFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The file name for core dump."
::= { agGeneral 20 }
agTftpAction OBJECT-TYPE
SYNTAX INTEGER {
other(1),
img-get(2),
cfg-get(3),
cfg-put(4),
dump-put(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is an action object to perform various TFTP Get or Put functions.
The TFTP sever is specified in agTftpServer object.
img-get(2) - Download switch image from a specified image
file (agTftpImageFileName) on the TFTP server to
the destinated storage (agTftpImage).
cfg-get(3) - Download switch configuration from a specified
file (agTftpCfgFileName) on the TFTP server.
cfg-put(4) - Upload switch configuration to a specified
file (agTftpCfgFileName) on the TFTP server.
dump-put(5)- Download switch core dump to a specified
file (agTftpDumpFileName) on the TFTP server.
other(1) is returned always when read."
::= { agGeneral 21 }
agTftpLastActionStatus OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The recorded status of the previous TFTP activity."
::= { agGeneral 22 }
agRevert OBJECT-TYPE
SYNTAX INTEGER {
other(1),
revert(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is an action object to revert the unapplied changes
made to the switch. By setting the value to revert(2),
all the unapplied changes will be reverted. This action
will copy the current_config to the new_config block.
other(1) is returned when this object is read. "
::= { agGeneral 23 }
agRevertApply OBJECT-TYPE
SYNTAX INTEGER {
other(1),
revertApply(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is an action object to revert the unsaved changes
made to the switch. By setting the value to revertApply(2),
all the unsaved as well as unapplied changes will be
reverted.
other(1) is returned when this object is read. "
::= { agGeneral 24 }
agEnabledSwFeatures OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The software features that are enabled on the switch."
::= { agGeneral 25 }
agClrSyslogMsgs OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Clears all current Syslog messages."
::= { agGeneral 26 }
agSavePending OBJECT-TYPE
SYNTAX INTEGER {
saveNeeded(1),
noSaveNeeded(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object, when read, gives the user information
whether an save action is needed and that the configuration
has been applied but not saved to the flash."
::= { agGeneral 27 }
agEnabledGslbKey OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Query if software key Global slb enabled on switch."
::= { agGeneral 28 }
agEnabledBwmKey OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Query if software key Bandwidth Mgmt. enabled on switch."
::= { agGeneral 29 }
agSlotNumber OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the slot in which this switch is installed. If the
agent implementing this MIB is not a blade in a chassis this
value has no meaning."
::= { agGeneral 30 }
agEnabledRurlKey OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the RURL software key."
::= { agGeneral 31 }
-- Agent General Configuration Group
agNewCfgSyslogHost OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The syslog host IP address, in the new_configuration block."
::= { agGeneralConfig 1 }
agCurCfgSyslogHost OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The syslog host IP address, as currently configured in
the current_configuration block."
::= { agGeneralConfig 2 }
agNewCfgBootp OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable the use of BootP, in the new_configuration block."
::= { agGeneralConfig 3 }
agCurCfgBootp OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable the use of BootP, as currently configured in the
current_configuration block."
::= { agGeneralConfig 4 }
agNewCfgSpanningTree OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Turn On or Off Spanning Tree Protocol for the switch, in the
new_configuration block."
::= { agGeneralConfig 5 }
agCurCfgSpanningTree OBJECT-TYPE
SYNTAX INTEGER {
on(2),
off(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of Spanning Tree Protocol for the switch, as
currently configured in the current_configuration block."
::= { agGeneralConfig 6 }
-- Trap host table
agTrapHostTableMaxEnt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of rows in the trap host table."
::= { agGeneralConfig 7 }
agCurCfgTrapHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgCurCfgTrapHostEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table of trap hosts which to send SNMP traps in the
current_configuration block."
::= { agGeneralConfig 8 }
agCurCfgTrapHostEntry OBJECT-TYPE
SYNTAX AgCurCfgTrapHostEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the trap host table in the current_configuration block."
INDEX { agCurCfgTrapHostIndx }
::= { agCurCfgTrapHostTable 1 }
AgCurCfgTrapHostEntry ::= SEQUENCE {
agCurCfgTrapHostIndx INTEGER,
agCurCfgTrapHostIpAddr IpAddress,
agCurCfgTrapHostCommString DisplayString
}
agCurCfgTrapHostIndx OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the row in trap host table."
::= { agCurCfgTrapHostEntry 1 }
agCurCfgTrapHostIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of a trap host."
::= { agCurCfgTrapHostEntry 2 }
agCurCfgTrapHostCommString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The SNMP community string to use with the trap host"
::= { agCurCfgTrapHostEntry 3 }
agNewCfgTrapHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgNewCfgTrapHostEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table of trap hosts which to send SNMP traps in the
new_configuration block."
::= { agGeneralConfig 9 }
agNewCfgTrapHostEntry OBJECT-TYPE
SYNTAX AgNewCfgTrapHostEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the trap host table in the new_configuration block."
INDEX { agNewCfgTrapHostIndx }
::= { agNewCfgTrapHostTable 1 }
AgNewCfgTrapHostEntry ::= SEQUENCE {
agNewCfgTrapHostIndx INTEGER,
agNewCfgTrapHostIpAddr IpAddress,
agNewCfgTrapHostCommString DisplayString
}
agNewCfgTrapHostIndx OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the row in trap host table."
::= { agNewCfgTrapHostEntry 1 }
agNewCfgTrapHostIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of a trap host."
::= { agNewCfgTrapHostEntry 2 }
agNewCfgTrapHostCommString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SNMP community string to use with the trap host"
::= { agNewCfgTrapHostEntry 3 }
agCurCfgHttpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The TCP port number that the HTTP server is listening to
in the current_configuration block."
::= { agGeneralConfig 10 }
agNewCfgHttpServerPort OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The TCP port number that the HTTP server is listening to
in the new_configuration block."
::= { agGeneralConfig 11 }
agCurCfgLoginBanner OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..79))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined login banner."
::= { agGeneralConfig 12 }
agNewCfgLoginBanner OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..79))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined login banner."
::= { agGeneralConfig 13 }
agNewCfgSyslog2Host OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The second syslog host IP address, in the new_configuration block."
::= { agGeneralConfig 14 }
agCurCfgSyslog2Host OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The second syslog host IP address, as currently configured in
the current_configuration block."
::= { agGeneralConfig 15 }
agCurCfgSyslogFac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The facility of syslog host in the current_configuration block."
::= { agGeneralConfig 16 }
agNewCfgSyslogFac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The facility of syslog host in the new_configuration block."
::= { agGeneralConfig 17 }
agCurCfgSyslog2Fac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The facility of syslog2 host in the current_configuration block."
::= { agGeneralConfig 18 }
agNewCfgSyslog2Fac OBJECT-TYPE
SYNTAX INTEGER {
local0(1),
local1(2),
local2(3),
local3(4),
local4(5),
local5(6),
local6(7),
local7(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The facility of syslogs host in the new_configuration block."
::= { agGeneralConfig 19 }
agCurCfgSmtpHost OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The user defined SMTP host."
::= { agGeneralConfig 20}
agNewCfgSmtpHost OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined SMTP host."
::= { agGeneralConfig 21 }
agCurCfgConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable console output of syslog messages."
::= { agGeneralConfig 22 }
agNewCfgConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable console output of syslog messages."
::= { agGeneralConfig 23 }
agCurCfgMgmtNetwork OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The management network - corresponding to the mnet command of
the slb configuration menu."
::= { agGeneralConfig 24 }
agNewCfgMgmtNetwork OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The management network - corresponding to the mnet command of
the system menu."
::= { agGeneralConfig 25 }
agCurCfgMgmtMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The management subnet mask - corresponding to the mmask command
of the system configuration menu."
::= { agGeneralConfig 26 }
agNewCfgMgmtMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The management subnet mask - corresponding to the mmask command
of the system configuration menu."
::= { agGeneralConfig 27 }
agNTP OBJECT IDENTIFIER ::= { agGeneralConfig 28 }
agCurCfgNTPServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The NTP Server Address."
::= { agNTP 1 }
agNewCfgNTPServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The NTP Server Address."
::= { agNTP 2 }
agCurCfgNTPResyncInterval OBJECT-TYPE
SYNTAX INTEGER (1..2880)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The NTP Server resync interval in minutes."
::= { agNTP 3 }
agNewCfgNTPResyncInterval OBJECT-TYPE
SYNTAX INTEGER (1..2880)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The NTP Server resync interval in minutes."
::= { agNTP 4 }
agCurCfgNTPTzone OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..3))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The NTP Server timezone offset from GMT in hours."
::= { agNTP 5 }
agNewCfgNTPTzone OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..3))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The NTP Server timezone offset from GMT in hours."
::= { agNTP 6 }
agCurCfgNTPDlight OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable/disable daylight savings time."
::= { agNTP 7 }
agNewCfgNTPDlight OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable daylight savings time."
::= { agNTP 8 }
agCurCfgNTPService OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable/disable NTP Service."
::= { agNTP 9 }
agNewCfgNTPService OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/disable NTP Service."
::= { agNTP 10 }
agLog OBJECT IDENTIFIER ::= { agGeneralConfig 29 }
agNewCfgSyslogTrapConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable console syslog and SNMP trap, in the
new_configuration block."
::= { agLog 1 }
agCurCfgSyslogTrapConsole OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable console syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 2 }
agNewCfgSyslogTrapSystem OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable system level syslog and SNMP trap, in the
new_configuration block."
::= { agLog 3 }
agCurCfgSyslogTrapSystem OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable system level syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 4 }
agNewCfgSyslogTrapMgmt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable management(flash, config, login) syslog and SNMP
trap, in the new_configuration block."
::= { agLog 5 }
agCurCfgSyslogTrapMgmt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable management(flash, config, login) syslog and SNMP
trap, as currently configured in the current_configuration block."
::= { agLog 6 }
agNewCfgSyslogTrapCli OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable CLI generated error syslog and SNMP trap, in the
new_configuration block."
::= { agLog 7 }
agCurCfgSyslogTrapCli OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable CLI generated error syslog and SNMP trap, as
currently configured in the current_configuration block."
::= { agLog 8 }
agNewCfgSyslogTrapStp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable spanning tree syslog and SNMP trap, in the
new_configuration block."
::= { agLog 9 }
agCurCfgSyslogTrapStp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable spanning tree syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 10 }
agNewCfgSyslogTrapVlan OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable VLAN syslog and SNMP trap, in the new_configuration
block."
::= { agLog 11 }
agCurCfgSyslogTrapVlan OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable VLAN syslog and SNMP trap, as currently configured
in the current_configuration block."
::= { agLog 12 }
agNewCfgSyslogTrapSlb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable SLB syslog and SNMP trap, in the new_configuration
block."
::= { agLog 13 }
agCurCfgSyslogTrapSlb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable SLB syslog and SNMP trap, as currently configured
in the current_configuration block."
::= { agLog 14 }
agNewCfgSyslogTrapGslb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable GSLB syslog and SNMP trap, in the new_configuration
block."
::= { agLog 15 }
agCurCfgSyslogTrapGslb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable GSLB syslog and SNMP trap, as currently configured
in the current_configuration block."
::= { agLog 16 }
agNewCfgSyslogTrapFilter OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable filter syslog and SNMP trap, in the
new_configuration block."
::= { agLog 17 }
agCurCfgSyslogTrapFilter OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable filter syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 18 }
agNewCfgSyslogTrapSsh OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable SSH, RADIUS syslog and SNMP trap, in the
new_configuration block."
::= { agLog 19 }
agCurCfgSyslogTrapSsh OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable SSH, RADIUS syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 20 }
agNewCfgSyslogTrapVrrp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable VRRP syslog and SNMP trap, in the new_configuration
block."
::= { agLog 21 }
agCurCfgSyslogTrapVrrp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable VRRP syslog and SNMP trap, as currently configured
in the current_configuration block."
::= { agLog 22 }
agNewCfgSyslogTrapBgp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable BGP syslog and SNMP trap, in the new_configuration
block."
::= { agLog 23 }
agCurCfgSyslogTrapBgp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable BGP syslog and SNMP trap, as currently configured
in the current_configuration block."
::= { agLog 24 }
agNewCfgSyslogTrapNtp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable NTP syslog and SNMP trap, in the new_configuration
block."
::= { agLog 25 }
agCurCfgSyslogTrapNtp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable NTP syslog and SNMP trap, as currently configured
in the current_configuration block."
::= { agLog 26 }
agNewCfgSyslogTrapIsd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable ISD syslog and SNMP trap, in the new_configuration
block."
::= { agLog 27 }
agCurCfgSyslogTrapIsd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable ISD syslog and SNMP trap, as currently configured
in the current_configuration block."
::= { agLog 28 }
agNewCfgSyslogTrapIp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable IP related syslog and SNMP trap, in the
new_configuration block."
::= { agLog 31 }
agCurCfgSyslogTrapIp OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable IP related syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 32 }
agNewCfgSyslogTrapWeb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable WEBUI related syslog and SNMP trap, in the
new_configuration block."
::= { agLog 35 }
agCurCfgSyslogTrapWeb OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable WEBUI related syslog and SNMP trap, as currently
configured in the current_configuration block."
::= { agLog 36 }
agNewCfgSyslogTrapSynAtk OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable SYN attack detection related syslog and SNMP trap,
in the new_configuration block."
::= { agLog 37 }
agCurCfgSyslogTrapSynAtk OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable SYN attack detection related syslog and SNMP trap,
as currently configured in the current_configuration block."
::= { agLog 38 }
agNewCfgSyslogTrapTcpLim OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable TCP rate limiting related syslog and SNMP trap,
in the new_configuration block."
::= { agLog 39 }
agCurCfgSyslogTrapTcpLim OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disable TCP rate limiting related syslog and SNMP trap,
as currently configured in the current_configuration block."
::= { agLog 40 }
-- RADIUS Configuration
radCurCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the Primary RADIUS server."
::= { radius 1 }
radNewCfgPrimaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the Primary RADIUS server."
::= { radius 2 }
radCurCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the Secondary RADIUS server."
::= { radius 3 }
radNewCfgSecondaryIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The IP address of the Secondary RADIUS server."
::= { radius 4 }
radCurCfgPort OBJECT-TYPE
SYNTAX INTEGER (1500..3000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specify the RADIUS port number."
::= { radius 5 }
radNewCfgPort OBJECT-TYPE
SYNTAX INTEGER (1500..3000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Speicfy the RADIUS port number."
::= { radius 6 }
radCurCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of seconds before resending authentication
to RADIUS server."
::= { radius 7 }
radNewCfgTimeout OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum number of seconds before resending authentication
to RADIUS server."
::= { radius 8 }
radCurCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of retries to the RADIUS server."
::= { radius 9 }
radNewCfgRetries OBJECT-TYPE
SYNTAX INTEGER (1..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of retries to the RADIUS server."
::= { radius 10 }
radCurCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disbale RADIUS authentication."
::= { radius 11 }
radNewCfgState OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable RADIUS authentication."
::= { radius 12 }
radCurCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The RADIUS authentication string."
::= { radius 13 }
radNewCfgAuthenString OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The RADIUS authentication string."
::= { radius 14 }
radCurCfgTelnet OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Enable or disbale RADIUS backdoor for telnet."
::= { radius 15 }
radNewCfgTelnet OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable or disable RADIUS backdoor for telnet."
::= { radius 16 }
-- Statistics Group
-- Memory Statistics Group
-- This group represents Memory Statistics information
memStatsAllocs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of memory allocations."
::= { memStats 1 }
memStatsFrees OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of memory frees."
::= { memStats 2 }
memStatsAllocFails OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of memory allocations failed."
::= { memStats 3 }
memStatsBytesCurr OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The outstanding memory in bytes have been allocated."
::= { memStats 4 }
memStatsBytesHiwat OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bytes allocated witch high water mark."
::= { memStats 5 }
memStatsPoolBytes OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total bytes in the memory pool."
::= { memStats 6 }
memStatsLargest OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The largest block has been allocated."
::= { memStats 7 }
-- Packet Statistics Group
-- This group represents Packet Statistics information
pktStatsAllocs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total packets have been allocated."
::= { pktStats 1 }
pktStatsFrees OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total packets have been freed."
::= { pktStats 2 }
pktStatsAllocFails OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total packet allocations failed."
::= { pktStats 3}
pktStatsMediums OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of medium size packets have been allocated."
::= { pktStats 4}
pktStatsJumbos OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of jumbo size packets have been allocated."
::= { pktStats 5}
pktStatsSmalls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of small size packets have been allocated."
::= { pktStats 6}
-- MP CPU Statisitics Group
mpCpuAStatsUtil1Second OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The utilization of MP CPU A over 1 second. It shows the percentage."
::= { mpCpuStats 1}
mpCpuBStatsUtil1Second OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The utilization of MP CPU B over 4 seconds.
It shows the percentage."
::= { mpCpuStats 2}
mpCpuAStatsUtil4Seconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The utilization of MP CPU A over 4 seconds.
It shows the percentage."
::= { mpCpuStats 3}
mpCpuBStatsUtil4Seconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The utilization of MP CPU B over 4 seconds.
It shows the percentage."
::= { mpCpuStats 4}
mpCpuAStatsUtil64Seconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The utilization of MP CPU A over 64 seconds.
It shows the percentage."
::= { mpCpuStats 5}
mpCpuBStatsUtil64Seconds OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The utilization of MP CPU B over 64 second.
It shows the percentage."
::= { mpCpuStats 6}
END