mibs/MIBS/awplus/ATKK-WLAN-ACCESS-MIB

723 lines
19 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- ============================================================================
-- ATKK-WLAN-ACCESS.MIB, Allied Telesis enterprise MIB: Wireless access point
-- Copyright (C) 2010-2016 by Allied Telesis Holdings K.K.
-- All rights reserved.
--
-- Version : 1.6.3
-- Description : Private MIB for wireless access point listed below.
-- : AT-TQ2403, AT-TQ2403EX, AT-TQ2450, AT-TQ3600,
-- : AT-TQ3200, AT-TQ3400, AT-TQ4400, AT-TQ4600, AT-TQ4400e
-- ============================================================================
ATKK-WLAN-ACCESS DEFINITIONS ::= BEGIN
IMPORTS
wirelessLanmMIB,
wirelesslan
FROM AT-SMI-MIB
OBJECT-TYPE,
NOTIFICATION-TYPE,
MODULE-IDENTITY,
OBJECT-IDENTITY,
Integer32,
enterprises,
Counter32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
MacAddress
FROM SNMPv2-TC;
atkkWlanAccess MODULE-IDENTITY
LAST-UPDATED "201605250000Z"
ORGANIZATION "Allied Telesis K.K."
CONTACT-INFO
"http://www.allied-telesis.co.jp"
DESCRIPTION
"Private MIB for the AT-TQ series wireless access point."
REVISION "201605250000Z"
DESCRIPTION
"1.6.3: - Fixed MIB structure error."
REVISION "201603230000Z"
DESCRIPTION
"1.6.2: - Added radar detected channels to DFS radar detection trap."
REVISION "201506170000Z"
DESCRIPTION
"1.6.1: - Supported trap for DFS Radar detection."
REVISION "201505110000Z"
DESCRIPTION
"1.6.0: - Supported AT-TQ4400e."
REVISION "201409300000Z"
DESCRIPTION
"1.5.1: - Changed to import AT-SMI-MIB from ATKK-WLAN-SMI-MIB."
REVISION "201311220000Z"
DESCRIPTION
"1.5.0: - Supported AT-TQ3200/AT-TQ3400/AT-TQ4400/AT-TQ4600.
- Added 11ac to atkkWiAcClient80211Spec and
atkkWiAcAP80211Spec."
REVISION "201208130000Z"
DESCRIPTION
"1.4.0: - Supported AT-TQ3600."
REVISION "201207090000Z"
DESCRIPTION
"1.3.2: - Supported atkkWiAcAPDetectConfig2 for TQ2450 wlan1 AP detect
configuration."
REVISION "201206060000Z"
DESCRIPTION
"1.3.1: - Expand the range of TrapHostString and CommunityString to 256."
REVISION "201201110000Z"
DESCRIPTION
"1.3.0: - Supported AT-TQ2450.
- Added 11n to atkkWiAcClient80211Spec and
atkkWiAcClient80211Spec."
REVISION "201104080000Z"
DESCRIPTION
"1.2.0: - Supported AT-TQ2403EX."
REVISION "201008200000Z"
DESCRIPTION
"1.1.0: - Supported UserID by the Associated-STAs
information, STA Associated/Disassociated trap
and Filtered STA trap.
- Added RADIUS Authentication result trap.
- Added trap config by the AP information.
- Standardized the file head.
- Corrected typo."
REVISION "200907280000Z" -- YYYYMMDDHHMMZ
DESCRIPTION
"1.0.0: Initial release."
::= { wirelessLanmMIB 6 }
tq2403 OBJECT IDENTIFIER ::= { wirelesslan 13 }
tq2450 OBJECT IDENTIFIER ::= { wirelesslan 19 }
tq2403ex OBJECT IDENTIFIER ::= { wirelesslan 20 }
tq3600 OBJECT IDENTIFIER ::= { wirelesslan 22 }
tq3200 OBJECT IDENTIFIER ::= { wirelesslan 24 }
tq3400 OBJECT IDENTIFIER ::= { wirelesslan 25 }
tq4400 OBJECT IDENTIFIER ::= { wirelesslan 26 }
tq4600 OBJECT IDENTIFIER ::= { wirelesslan 27 }
tq4400e OBJECT IDENTIFIER ::= { wirelesslan 34 }
--
-- textual conventions
--
SsidString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type is string for SSID(Service Set ID)."
SYNTAX OCTET STRING (SIZE (0..32))
UserIdString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type is string for RADIUS UserID."
SYNTAX OCTET STRING (SIZE (0..255))
TrapHostString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type is string for trap host IP address/hostname."
SYNTAX OCTET STRING (SIZE (1..256))
CommunityString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type is string for trap community."
SYNTAX OCTET STRING (SIZE (1..256))
TrapString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type is string for trap messages."
SYNTAX OCTET STRING (SIZE (1..256))
ChannelString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type is string for channels which detected radar."
SYNTAX OCTET STRING (SIZE (1..32))
--
-- MIB module version (for NMS convenience)
--
atkkWiAcVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version number of this MIB module"
::= { atkkWlanAccess 1 }
--
-- AP information
--
atkkWiAcApInfo OBJECT-IDENTITY
STATUS current
DESCRIPTION
"AP information"
::= { atkkWlanAccess 6 }
atkkWiAcApInfoTrapTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtkkWiAcApInfoTrapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table that contains information about
a trap configuration of this AP."
::= { atkkWiAcApInfo 1 }
atkkWiAcApInfoTrapEntry OBJECT-TYPE
SYNTAX AtkkWiAcApInfoTrapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a trap configuration."
INDEX
{
atkkWiAcApTrapHost
}
::= { atkkWiAcApInfoTrapTable 1 }
AtkkWiAcApInfoTrapEntry ::=
SEQUENCE
{
atkkWiAcApTrapHost TrapHostString,
atkkWiAcApTrapCommunity CommunityString,
atkkWiAcApTrapColdStartConfig INTEGER,
atkkWiAcApTrapLinkConfig INTEGER,
atkkWiAcApTrapAuthenticationConfig INTEGER,
atkkWiAcApTrapAssociationConfig INTEGER,
atkkWiAcApTrapUnknownApConfig INTEGER,
atkkWiAcApTrapFilteredStaConfig INTEGER,
atkkWiAcApTrapRadiusAuthSuccessConfig INTEGER,
atkkWiAcApTrapRadiusAuthFailConfig INTEGER,
atkkWiAcApTrapDfsDetectedConfig INTEGER
}
atkkWiAcApTrapHost OBJECT-TYPE
SYNTAX TrapHostString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TrapHost configuration of this AP."
::= { atkkWiAcApInfoTrapEntry 1 }
atkkWiAcApTrapCommunity OBJECT-TYPE
SYNTAX CommunityString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"TrapCommunity configuration of this AP."
::= { atkkWiAcApInfoTrapEntry 2 }
atkkWiAcApTrapColdStartConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable configuration of the ColdStart trap."
::= { atkkWiAcApInfoTrapEntry 3 }
atkkWiAcApTrapLinkConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable configuration of the Link up/down trap."
::= { atkkWiAcApInfoTrapEntry 4 }
atkkWiAcApTrapAuthenticationConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable configuration of the Authentication trap."
::= { atkkWiAcApInfoTrapEntry 5 }
atkkWiAcApTrapAssociationConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable configuration of
an STA Association/Disassociation trap."
::= { atkkWiAcApInfoTrapEntry 6 }
atkkWiAcApTrapUnknownApConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable configuration of an Unknown AP detection trap."
::= { atkkWiAcApInfoTrapEntry 7 }
atkkWiAcApTrapFilteredStaConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable configuration of a Filtered STA detection trap."
::= { atkkWiAcApInfoTrapEntry 8 }
atkkWiAcApTrapRadiusAuthSuccessConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable configuration of the RADIUS Authentication success trap."
::= { atkkWiAcApInfoTrapEntry 9 }
atkkWiAcApTrapRadiusAuthFailConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable configuration of the RADIUS Authentication fail trap."
::= { atkkWiAcApInfoTrapEntry 10 }
atkkWiAcApTrapDfsDetectedConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable/disable configuration of the DFS Detected trap."
::= { atkkWiAcApInfoTrapEntry 11 }
--
-- Associated-STAs information
--
atkkWiAcClients OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Connected Stations List.
This list consists of entries which describe STAs which are
currently connected (associated) to the AP."
::= { atkkWlanAccess 2 }
atkkWiAcClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtkkWiAcClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about STAs
which are currently connected to the AP."
::= { atkkWiAcClients 1 }
atkkWiAcClientEntry OBJECT-TYPE
SYNTAX AtkkWiAcClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a STA."
INDEX
{
atkkWiAcClientAddress
}
::= { atkkWiAcClientTable 1 }
AtkkWiAcClientEntry ::=
SEQUENCE
{
atkkWiAcClientAddress MacAddress,
atkkWiAcClientSSID SsidString,
atkkWiAcClient80211Spec INTEGER,
atkkWiAcClientChannel Integer32,
atkkWiAcClientAge Counter32,
atkkWiAcClientUserID UserIdString
}
atkkWiAcClientAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address identifying a peer STA."
::= { atkkWiAcClientEntry 1 }
atkkWiAcClientSSID OBJECT-TYPE
SYNTAX SsidString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID to which the STA is associated."
::= { atkkWiAcClientEntry 2 }
atkkWiAcClient80211Spec OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
dot11b(2),
dot11g(3),
dot11a(4),
dot11ng(5),
dot11na(6),
dot11ac(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.11 technology which the STA is using."
::= { atkkWiAcClientEntry 3 }
atkkWiAcClientChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The radio channel which the STA is using."
::= { atkkWiAcClientEntry 4 }
atkkWiAcClientAge OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time (in seconds) since the STA was associated."
::= { atkkWiAcClientEntry 5 }
atkkWiAcClientUserID OBJECT-TYPE
SYNTAX UserIdString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"UserID of the STA which is associated."
::= { atkkWiAcClientEntry 6 }
--
-- Neighbor AP information
--
atkkWiAcAPs OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Neighboring APs List.
This list consists of entries which describe APs which is
found by the AP."
::= { atkkWlanAccess 3 }
atkkWiAcAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtkkWiAcAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains information about APs
nearby."
::= { atkkWiAcAPs 1 }
atkkWiAcAPEntry OBJECT-TYPE
SYNTAX AtkkWiAcAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a neighboring AP."
INDEX
{
atkkWiAcAPAddress
}
::= { atkkWiAcAPTable 1 }
AtkkWiAcAPEntry ::=
SEQUENCE
{
atkkWiAcAPAddress MacAddress,
atkkWiAcAPSSID SsidString,
atkkWiAcAP80211Spec INTEGER,
atkkWiAcAPChannel Integer32,
atkkWiAcAPRSSI Integer32,
atkkWiAcAPRadarDetected TrapString,
atkkWiAcAPChannels ChannelString
}
atkkWiAcAPAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the neighbor AP."
::= { atkkWiAcAPEntry 1 }
atkkWiAcAPSSID OBJECT-TYPE
SYNTAX SsidString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID of the neighbor AP."
::= { atkkWiAcAPEntry 2 }
atkkWiAcAP80211Spec OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
dot11b(2),
dot11g(3),
dot11a(4),
dot11ng(5),
dot11na(6),
dot11ac(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.11 technology which the neighbor AP is using."
::= { atkkWiAcAPEntry 3 }
atkkWiAcAPChannel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The radio channel which the neighbor AP is using."
::= { atkkWiAcAPEntry 4 }
atkkWiAcAPRSSI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RSSI (signal strength) of the neighbor AP."
::= { atkkWiAcAPEntry 5 }
atkkWiAcAPRadarDetected OBJECT-TYPE
SYNTAX TrapString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The message of Radar Detected."
::= { atkkWiAcAPEntry 6 }
atkkWiAcAPChannels OBJECT-TYPE
SYNTAX ChannelString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The channels of Radar Detected."
::= { atkkWiAcAPEntry 7 }
atkkWiAcAPDetectConfig OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enable/disable configuration of the Neighbor AP detection.
wlan0/wlan1 for TQ2403/EX
wlan0 for TQ2450/TQ3600/TQ3200/TQ3400/TQ4400/TQ4600/TQ4400e"
::= { atkkWiAcAPs 2 }
atkkWiAcAPDetectConfig2 OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The enable/disable configuration of the Neighbor AP detection.
wlan1 for TQ2450/TQ3600/TQ3400/TQ4400/TQ4600/TQ4400e"
::= { atkkWiAcAPs 3 }
--
-- MAC address filters (ACL)
--
atkkWiAcMacACL OBJECT-IDENTITY
STATUS current
DESCRIPTION
"MAC address filters List."
::= { atkkWlanAccess 4 }
atkkWiAcMacACLTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtkkWiAcMacACLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains MAC address filters."
::= { atkkWiAcMacACL 1 }
atkkWiAcMacACLEntry OBJECT-TYPE
SYNTAX AtkkWiAcMacACLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC address filter."
INDEX
{
atkkWiAcMacACLAddress
}
::= { atkkWiAcMacACLTable 1 }
AtkkWiAcMacACLEntry ::=
SEQUENCE
{
atkkWiAcMacACLAddress MacAddress
}
atkkWiAcMacACLAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address which is filtered."
::= { atkkWiAcMacACLEntry 1 }
atkkWiAcMacACLModeConfig OBJECT-TYPE
SYNTAX INTEGER {
deny(1),
accept(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode configuration of the MAC filtering."
::= { atkkWiAcMacACL 2 }
--
-- Private Notifications(Traps)
--
atkkWiAcNotification OBJECT IDENTIFIER ::= { atkkWlanAccess 5 }
atkkWiAcNotificationObjects OBJECT IDENTIFIER ::= { atkkWiAcNotification 0 }
atkkWiAcAssociated NOTIFICATION-TYPE
OBJECTS {
atkkWiAcClientAddress,
atkkWiAcClientSSID,
atkkWiAcClient80211Spec,
atkkWiAcClientChannel,
atkkWiAcClientAge,
atkkWiAcClientUserID
}
STATUS current
DESCRIPTION
"This notification is sent when a STA was connected."
::= { atkkWiAcNotificationObjects 1 }
atkkWiAcDisassociated NOTIFICATION-TYPE
OBJECTS {
atkkWiAcClientAddress,
atkkWiAcClientSSID,
atkkWiAcClient80211Spec,
atkkWiAcClientChannel,
atkkWiAcClientAge,
atkkWiAcClientUserID
}
STATUS current
DESCRIPTION
"This notification is sent when a STA was disconnected."
::= { atkkWiAcNotificationObjects 2 }
atkkWiAcUnknownAP NOTIFICATION-TYPE
OBJECTS {
atkkWiAcAPAddress,
atkkWiAcAPSSID,
atkkWiAcAP80211Spec,
atkkWiAcAPChannel,
atkkWiAcAPRSSI
}
STATUS current
DESCRIPTION
"This notification is sent when an unknown AP was detected."
::= { atkkWiAcNotificationObjects 3 }
atkkWiAcFiltered NOTIFICATION-TYPE
OBJECTS {
atkkWiAcClientAddress,
atkkWiAcClientSSID,
atkkWiAcClient80211Spec,
atkkWiAcClientChannel,
atkkWiAcClientAge,
atkkWiAcClientUserID
}
STATUS current
DESCRIPTION
"This notification is sent when an STA was denied by MAC filters."
::= { atkkWiAcNotificationObjects 4 }
atkkWiAcRadiusAuthSucceeded NOTIFICATION-TYPE
OBJECTS {
atkkWiAcClientAddress,
atkkWiAcClientSSID,
atkkWiAcClientUserID
}
STATUS current
DESCRIPTION
"This notification is sent when RADIUS authentication of
an STA succeeded."
::= { atkkWiAcNotificationObjects 5 }
atkkWiAcRadiusAuthFailed NOTIFICATION-TYPE
OBJECTS {
atkkWiAcClientAddress,
atkkWiAcClientSSID,
atkkWiAcClientUserID
}
STATUS current
DESCRIPTION
"This notification is sent when RADIUS authentication of
an STA failed."
::= { atkkWiAcNotificationObjects 6 }
atkkWiAcRadarDetected NOTIFICATION-TYPE
OBJECTS {
atkkWiAcAPRadarDetected,
atkkWiAcAPChannels
}
STATUS current
DESCRIPTION
"This notification is sent when Radar detected."
::= { atkkWiAcNotificationObjects 7 }
END
--
-- ATKK-WLAN-ACCESS
--