mibs/MIBS/bluecatnetworks/BCN-HA-MIB

315 lines
9.1 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- Copyright 2017 BlueCat Networks. All rights reserved.
-- *****************************************************************
-- BCN-HA-MIB.mib: BlueCat Networks HA services
--
--
-- December 2010, Fabian Ischia
--
-- All rights reserved.
--
-- *****************************************************************
BCN-HA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-IDENTITY,
OBJECT-TYPE, Unsigned32
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
BcnAlarmSeverity
FROM BCN-TC-MIB
bcnServices
FROM BCN-SMI-MIB;
bcnHaMIB MODULE-IDENTITY
LAST-UPDATED "201012150000Z"
ORGANIZATION "BlueCat Networks"
CONTACT-INFO
"BlueCat Networks. Customer Care.
North America
Call: +1.866.491.2228
Europe
Call: +44.8081.011.306
Other
Call: +1.416.646.8433
Email: support@bluecatnetworks.com"
DESCRIPTION
"This module provides status as well as statistical information
about the HA service."
REVISION "201012150000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { bcnHa 1 }
bcnHa OBJECT IDENTIFIER ::= { bcnServices 5 }
-- Organization
bcnHaObjects OBJECT IDENTIFIER
::= { bcnHa 2 }
bcnHaNotification OBJECT IDENTIFIER
::= { bcnHa 3 }
bcnHaConformance OBJECT IDENTIFIER
::= { bcnHa 4 }
-- Data objects
bcnHaServiceStatus OBJECT-IDENTITY
STATUS current
DESCRIPTION
"General state of the HA Service."
::= { bcnHaObjects 1 }
bcnHaSerOperState OBJECT-TYPE
SYNTAX INTEGER {
standalone(1),
active(2),
passive(3),
stopped(4),
stopping(5),
becomingActive(6),
becomingPassive(7),
fault(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational state of the Service. The possible states are:
standalone(1) The node is not configured to provide clustering
services.
active(2) The system is operational and the node is providing
clustering services.
passive(3) The system is operational and the node is active as
a passive standby for the cluster.
stopped(4) The service is stopped either intentionally (i.e.:
the service is not supposed to run on this node) or
unintentionally (a problem has occurred).
This state might apply to both standalong and
clustered nodes.
stopping(5) The service is in the process of stopping. Stopping
a service might be necessary after a configuration
change.
becomingActive (6) The node is becoming active, either as a result
of a switchover or by initial start.
becomingPassive (7) The node is failing over. Another node is taking
charge of the services.
fault(8) An error has been detected and the state is undefined.
"
::= { bcnHaServiceStatus 1 }
bcnHaSerReplicationState OBJECT-TYPE
SYNTAX INTEGER {
notConfigured(1),
replicating(2),
synchronized(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the replication. All nodes in a cluster
must be in synch in order for HA to work correctly. The nodes
might be temporarily out of synch during cluster creation or
when one of the nodes has been down for a while."
::= { bcnHaServiceStatus 2 }
bcnHaSerAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF BcnHaSerAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table keeps the information about the network addresses
for the clustered nodes. Most of the time this table will contain
one or two rows, depending on the type of IPs configured for
clustering."
::= { bcnHaServiceStatus 3 }
bcnHaSerAddressEntry OBJECT-TYPE
SYNTAX BcnHaSerAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A logical row in the bcnHaSerAddressTable."
INDEX { bcnHaSerAddrTableIndex }
::= { bcnHaSerAddressTable 1 }
BcnHaSerAddressEntry ::=
SEQUENCE {
bcnHaSerAddrTableIndex Unsigned32,
bcnHaSerVirtualAddressType InetAddressType,
bcnHaSerVirtualAddress InetAddress,
bcnHaSerPhysicalAddressType InetAddressType,
bcnHaSerPhysicalAddress InetAddress,
bcnHaSerPeerAddressType InetAddressType,
bcnHaSerPeerAddress InetAddress
}
bcnHaSerAddrTableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This index will normally be 0 or 1"
::= { bcnHaSerAddressEntry 1 }
bcnHaSerVirtualAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address stored in bcnHaSerVirtualAddress."
::= { bcnHaSerAddressEntry 2 }
bcnHaSerVirtualAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The virtual IP address configured for this node. The type
of this mib variable is defined in bcnHaSerVirtualAddressType.
This address binds to the active node at all times."
::= { bcnHaSerAddressEntry 3 }
bcnHaSerPhysicalAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address stored in bcnHaSerPhysicalAddress."
::= { bcnHaSerAddressEntry 4 }
bcnHaSerPhysicalAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical IP address configured for this node. The type
of this mib variable is defined in bcnHaSerPhisicalAddressType.
This address is not affected by switchover events."
::= { bcnHaSerAddressEntry 5 }
bcnHaSerPeerAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address stored in bcnHaSerPeerAddress."
::= { bcnHaSerAddressEntry 6 }
bcnHaSerPeerAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical IP address configured for the peer node. The type
of this mib variable is defined in bcnHaSerPeerAddressType.
This address is not affected by switchover events."
::= { bcnHaSerAddressEntry 7 }
-- Notification definitions
bcnHaNotificationEvents OBJECT IDENTIFIER
::= { bcnHaNotification 0 }
bcnHaNotificationData OBJECT IDENTIFIER
::= { bcnHaNotification 1 }
-- Notification data
bcnHaAlarmSeverity OBJECT-TYPE
SYNTAX BcnAlarmSeverity
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Severity classification for the alarm."
::= { bcnHaNotificationData 1 }
bcnHaAlarmInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Descriptive information about the alarm event."
::= { bcnHaNotificationData 2 }
-- Notification events
bcnHaAlarmNotif NOTIFICATION-TYPE
OBJECTS {
bcnHaSerOperState,
bcnHaAlarmSeverity,
bcnHaAlarmInfo
}
STATUS current
DESCRIPTION
"A bcnHaAlarmNotif signifies that the HA service has transitioned
state or a particular event has been detected on the service."
::= { bcnHaNotificationEvents 1 }
-- Conformance
bcnHaServiceCompliances OBJECT IDENTIFIER
::= { bcnHaConformance 1 }
bcnHaServiceGroups OBJECT IDENTIFIER
::= { bcnHaConformance 2 }
bcnHaServiceStatusGroup OBJECT-GROUP
OBJECTS {
bcnHaSerOperState,
bcnHaSerReplicationState,
bcnHaSerVirtualAddressType,
bcnHaSerVirtualAddress,
bcnHaSerPhysicalAddressType,
bcnHaSerPhysicalAddress,
bcnHaSerPeerAddressType,
bcnHaSerPeerAddress
}
STATUS current
DESCRIPTION "Status conformance."
::= { bcnHaServiceGroups 1 }
bcnHaNotificationEventGroup NOTIFICATION-GROUP
NOTIFICATIONS {
bcnHaAlarmNotif
}
STATUS current
DESCRIPTION "Server statistics conformance."
::= { bcnHaServiceGroups 2 }
bcnHaNotificationDataGroup OBJECT-GROUP
OBJECTS {
bcnHaAlarmSeverity,
bcnHaAlarmInfo
}
STATUS current
DESCRIPTION "Server statistics conformance."
::= { bcnHaServiceGroups 3 }
bcnHaStatusCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Basic conformance"
MODULE -- This module
MANDATORY-GROUPS {
bcnHaServiceStatusGroup,
bcnHaNotificationEventGroup,
bcnHaNotificationDataGroup }
::= {bcnHaServiceCompliances 1 }
END