mibs/MIBS/brocade/FOUNDRY-SN-IP-ACL-MIB

1535 lines
38 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
FOUNDRY-SN-IP-ACL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,IpAddress,Counter64, Unsigned32,Integer32
FROM SNMPv2-SMI
DisplayString, MacAddress, TruthValue, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC
router
FROM FOUNDRY-SN-ROOT-MIB
InterfaceIndex, ifIndex
FROM IF-MIB
RtrStatus
FROM FOUNDRY-SN-IP-MIB
PortQosTC, FdryVlanIdOrNoneTC
FROM FOUNDRY-SN-SWITCH-GROUP-MIB;
snAgAcl MODULE-IDENTITY
LAST-UPDATED "201103020000Z" -- 03 March 2011
ORGANIZATION "Brocade Communications Systems, Inc."
CONTACT-INFO
"Technical Support Center
130 Holger Way,
San Jose, CA 95134
Email: ipsupport@brocade.com
Phone: 1-800-752-8061
URL: www.brocade.com"
DESCRIPTION
"Copyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information Base Specification
embodies Brocade Communications Systems' confidential and proprietary
intellectual property. Brocade Communications Systems retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment."
REVISION "201103020000Z" -- 02 March 2011
DESCRIPTION
"Updated range of AclNumber from (1..499) to (1..599)."
REVISION "201006020000Z" -- 04 June 2010
DESCRIPTION
"Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields."
REVISION "200909300000Z" -- September 30, 2009
DESCRIPTION
""
::= {router 2 15}
-- Textual Conventions
SnRowStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The status of a given row in the table."
SYNTAX INTEGER {other(1), valid(2), delete(3), create(4)}
Action ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The action to be taken on the packet after filtering is done."
SYNTAX INTEGER { deny(0), permit(1) }
TruthVal ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Boolean value."
SYNTAX INTEGER { false (0), true (1) }
FdryClauseIndexTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"One-based clause index value within a given ACL number."
SYNTAX Unsigned32
AclNumber ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Access control list number for an entry.
The standard Access list is in the range <1..99>.
The extended Access list is in the range <100-199>.
The named standard Access list is in the range <200..299>.
The named extended Access list is in the range <300-399>.
The L2 Access list is in the range <400-599>."
SYNTAX INTEGER (1..599)
AclNameString ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The optional name for a given access-list. In general, the ACL number
for a named ACL is in the range of 200 and 399."
SYNTAX OCTET STRING (SIZE (0..255))
Operator ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The operation used within a given ACL filter to determine permit or deny."
SYNTAX INTEGER { eq(0), neq(1), lt(2), gt(3), range(4), undefined(7) }
IpProtocol ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The IP protocol number on which ACL can be applied."
SYNTAX Integer32 (0..255)
PrecedenceValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The IP precedence value on which ACL can be applied."
SYNTAX INTEGER {
routine(0),
priority(1),
immediate(2),
flash(3),
flashoverride(4),
critical(5),
internet(6),
network(7),
undefined(8)
}
TosValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The IP TOS value on which ACL can be applied."
SYNTAX INTEGER {
normal(0),
minMonetaryCost(1),
maxReliability(2),
tosValue3(3),
maxThroughput(4),
tosValue5(5),
tosValue6(6),
tosValue7(7),
minDelay(8),
tosValue9(9),
tosValue10(10),
tosValue11(11),
tosValue12(12),
tosValue13(13),
tosValue14(14),
tosValue15(15),
undefined(16)
}
Direction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The packet flow direction within an interface for which ACL needs to be applied."
SYNTAX INTEGER { inbound(0), outbound(1) }
FdryEnetTypeOrZeroTC ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Ethernet Type field within the Ethernet-II frame"
SYNTAX INTEGER {
invalid(0),
ipv4(1),
arp(2),
ipv6(3)
}
snAgAclGlobal OBJECT IDENTIFIER ::= { snAgAcl 1 }
snAgAclGblCurRowIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current row index of the ACL table entry."
::= { snAgAclGlobal 1 }
--
-- ACL Table
--
snAgAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Access Control List"
::= { snAgAcl 2 }
snAgAclEntry OBJECT-TYPE
SYNTAX SnAgAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the IP access control list table."
INDEX { snAgAclIndex }
::= { snAgAclTable 1 }
SnAgAclEntry ::= SEQUENCE {
snAgAclIndex
Integer32,
snAgAclNumber
AclNumber,
snAgAclName
DisplayString,
snAgAclAction
Action,
snAgAclProtocol
IpProtocol,
snAgAclSourceIp
IpAddress,
snAgAclSourceMask
IpAddress,
snAgAclSourceOperator
Operator,
snAgAclSourceOperand1
INTEGER,
snAgAclSourceOperand2
INTEGER,
snAgAclDestinationIp
IpAddress,
snAgAclDestinationMask
IpAddress,
snAgAclDestinationOperator
Operator,
snAgAclDestinationOperand1
INTEGER,
snAgAclDestinationOperand2
INTEGER,
snAgAclPrecedence
PrecedenceValue,
snAgAclTos
TosValue,
snAgAclEstablished
RtrStatus,
snAgAclLogOption
TruthVal,
snAgAclStandardFlag
TruthVal,
snAgAclRowStatus
SnRowStatus,
snAgAclFlowCounter
Counter64,
snAgAclPacketCounter
Counter64,
snAgAclComments
DisplayString,
snAgAclIpPriority
INTEGER,
snAgAclPriorityForce
INTEGER,
snAgAclPriorityMapping
INTEGER,
snAgAclDscpMarking
INTEGER,
snAgAclDscpMapping
INTEGER,
snAgAclIcmpCode
INTEGER,
snAgAclParameters
BITS
}
snAgAclIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Access control list item number for an entry. This is a unique
number that identifies different Access list entries combined with
the Access list name and Access list number. This one has to be
unique even though the name and number are not unique for a given
Access list with same or different source address, subnet mask,
destination address and destination mask, protocol type, action
(permit/deny) type and the operator (neq, eq, gt and, lt) which
makes the index a unique tuple (name, number, itemnumber)."
::= { snAgAclEntry 1 }
snAgAclNumber OBJECT-TYPE
SYNTAX AclNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The access-list number for this entry."
::= { snAgAclEntry 2 }
snAgAclName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ACL name for an entry."
::= { snAgAclEntry 3 }
snAgAclAction OBJECT-TYPE
SYNTAX Action
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Action to take if the ip packet matches with this access control list."
::= { snAgAclEntry 4 }
snAgAclProtocol OBJECT-TYPE
SYNTAX IpProtocol
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Transport protocol. Valid values for the IP protocol are:
0 = any IP protocol
1 = ICMP
2 = IGMP
3 = ggp
4 = ipencap
5 = st2
6 = TCP
7 = cbt
8 = egp
9 = igp
10 = bbn_rcc
11 = nvp
12 = pup
13 = argus
14 = emcon
15 = xnet
16 = chaos
17 = UDP
18 = mux
19 = dcn
20 = hmp
21 = prm
22 = xns_idp
23 = trunk1
24 = trunk2
25 = leaf1
26 = leaf2
27 = rdp
28 = irtp
29 = iso_tp4
30 = netblt
31 = mfe_nsp
32 = merit_inp
33 = sep
34 = threepc
35 = idpr
36 = xtp
37 = ddp
38 = idpr_cmtp
39 = tppp
40 = il
41 = ipv6
42 = sdrp
43 = ipv6_route
44 = ipv6_frag
45 = idrp
46 = rsvp
47 = gre
48 = mhrp
49 = bna
50 = esp
51 = ahp
52 = inlsp
53 = swipe
54 = narp
55 = mobile
56 = tlsp
57 = skip
58 = ipv6_icmp
59 = ipv6_nonxt
60 = ipv6_opts
62 = cftp
64 = sat_expak
65 = kryptolan
66 = rvd
67 = ippc
69 = sat_mon
70 = visa
71 = ipcv
72 = cpnx
73 = cphb
74 = wsn
75 = pvp
76 = br_sat_mon
77 = sun_nd
78 = wb_mon
79 = wb_expak
80 = iso_ip
81 = vmtp
82 = secure_vmtp
83 = vines
84 = ttp
85 = nsfnet_igp
86 = dgp
87 = tcf
88 = IGRP
89 = OSPF
90 = sprite_rpc
91 = larp
92 = mtp
93 = ax25
94 = ipip
95 = micp
96 = scc_sp
97 = etherip
98 = encap
100 = gmtp
101 = ifmp
102 = pnni
103 = pim
104 = aris
105 = scps
106 = qnx
107 = an
108 = ipcomp
109 = snp
110 = compaq_peer
111 = ipxinip
112 = vrrp
113 = pgm
115 = l2tp
116 = ddx
117 = iatp
118 = st
119 = srp
120 = uti
121 = smp
122 = sm
123 = ptp
124 = isis
125 = fire
126 = crtp
127 = crdup
128 = sscopmce
129 = iplt
130 = sps
131 = pipe
132 = sctp
133 = fc
134 = rsvp_e2e_ignore
135 = mobility_header
136 = udplite
137 = mpls_in_ip
138 = manet
139 = hip
140 = shim6
254 = divert
"
::= { snAgAclEntry 5 }
snAgAclSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP address."
::= { snAgAclEntry 6 }
snAgAclSourceMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Source IP subnet mask."
::= { snAgAclEntry 7 }
snAgAclSourceOperator OBJECT-TYPE
SYNTAX Operator
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of comparison to perform. For now, this only applys to tcp or udp
to compare the port number"
::= { snAgAclEntry 8 }
snAgAclSourceOperand1 OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For now this only refers to transport protocol port number. 0 means NA"
::= { snAgAclEntry 9 }
snAgAclSourceOperand2 OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For now this only refers to transport protocol port number.
Used in ICMP Protocol to convey the ICMP Type
value. 0 means NA.
Valid values for ICMP Type:
1 = Echo reply
4 = Destination unreachable
5 = Source quench
6 = Redirect
9 = Echo request
10=Router advertisement
11=Router solicitation
12=Time exceeded
13=Parameter problem
14=Timestamp request
15=Timestamp reply
16=Information request
17=Information reply
18=Address mask request
19=Address mask reply.
"
::= { snAgAclEntry 10 }
snAgAclDestinationIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP address."
::= { snAgAclEntry 11 }
snAgAclDestinationMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination IP subnet mask."
::= { snAgAclEntry 12 }
snAgAclDestinationOperator OBJECT-TYPE
SYNTAX Operator
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of comparison to perform. For now, this only applys to tcp or udp
to compare the port number"
::= { snAgAclEntry 13 }
snAgAclDestinationOperand1 OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For now this only refers to transport protocol port number. 0 means NA"
::= { snAgAclEntry 14 }
snAgAclDestinationOperand2 OBJECT-TYPE
SYNTAX INTEGER(0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For now this only refers to transport protocol port number. 0 means NA"
::= { snAgAclEntry 15 }
snAgAclPrecedence OBJECT-TYPE
SYNTAX PrecedenceValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This refers to IP precedence value in the range <0-7>
critical(5),
flash(3),
flash-override(4),
immediate(2),
internet(6),
network(7),
priority(1),
routine(0)"
::= { snAgAclEntry 16 }
snAgAclTos OBJECT-TYPE
SYNTAX TosValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This refers to the IP type of service value in range <0-15>, which is
the sum of numeric vlaues of the following options -
match packets with maximum reliability TOS (2)
match packets with maximum throughput TOS (4)
match packets with minimum delay (8)
match packets with minimum monetary cost TOS (1)
match packets with normal TOS (0)"
::= { snAgAclEntry 17 }
snAgAclEstablished OBJECT-TYPE
SYNTAX RtrStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable the filtering of established TCP packets of which the
ACK or RESET flag is on. This additional filter only applies to TCP
transport protocol."
::= { snAgAclEntry 18 }
snAgAclLogOption OBJECT-TYPE
SYNTAX TruthVal
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Log flag"
::= { snAgAclEntry 19 }
snAgAclStandardFlag OBJECT-TYPE
SYNTAX TruthVal
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Return whether the ACL is standard or extended, 1 for standard ACL"
::= { snAgAclEntry 20 }
snAgAclRowStatus OBJECT-TYPE
SYNTAX SnRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To create or delete a access list entry."
::= { snAgAclEntry 21 }
snAgAclFlowCounter OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Approximate count of flows matching individual ACL entry."
::= { snAgAclEntry 22 }
snAgAclPacketCounter OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Accurate count of packets matching individual ACL entry."
::= { snAgAclEntry 23 }
snAgAclComments OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Remark description of individual ACL entry."
::= { snAgAclEntry 24 }
snAgAclIpPriority OBJECT-TYPE
SYNTAX INTEGER(0..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"QoS priority option for IP ACL entry."
::= { snAgAclEntry 25 }
snAgAclPriorityForce OBJECT-TYPE
SYNTAX INTEGER(0..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Force packet outgoing priority. Not defined(4)"
::= { snAgAclEntry 26 }
snAgAclPriorityMapping OBJECT-TYPE
SYNTAX INTEGER(0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Map incoming packet priority. Not defined(8)"
::= { snAgAclEntry 27 }
snAgAclDscpMarking OBJECT-TYPE
SYNTAX INTEGER(0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mark packets with given DSCP value. Not defined(64)"
::= { snAgAclEntry 28 }
snAgAclDscpMapping OBJECT-TYPE
SYNTAX INTEGER(0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Map incoming DSCP value. Not defined(64)"
::= { snAgAclEntry 29 }
snAgAclIcmpCode OBJECT-TYPE
SYNTAX INTEGER(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ICMP Message Code value. Used in combination with
ICMP Message Type (use snAgAclSourceOperand2) to
setup an ICMP filter. This object is not used with any
other protocol. 0 means NA.
Supported values
Type: Echo reply
--------------
1 = Echo reply
Type: Destination unreachable
-------------------------
1 = Network unreachable
2 = Host unreachable
3 = Protocol unreachable
4 = Port unreachable
5 = Fragmentation needed by don't fragment bit set
6 = Source route failed
7 = Destination network unknown
8 = Destination host unknown
9 = Source host isolated
10 = Destination network administratively prohibited
11=Destination host administratively prohibited
12=Network unreachable for TOS
13=Host unreachable for TOS
14=Communication administratively prohibited by filter
15=Host precedence violation
16=Precedence cutoff in effect
Type: Source quench
------------------
1 = Source quench
Type: Redirect
------------
1 = Redirect for network
2 = Redirect for host
3 = Redirect for TOS and network
4 = Redirect for TOS and host
Type: Echo request
-----------------
1 = Echo request
Type: Router advertisement
------------------------
1 = Router advertisement
Type: Router solicitation
---------------------
1 = Router solicitation
Type: Time exceeded
------------------
1 = Time to live equals 0 during transmit
2 = Time to live equals 0 during reassembly
Type: Parameter problem
---------------------
1 = IP header bad (catchall error)
2 = Required option missing
Type: Timestamp request
----------------------
1 = Timestamp request
Type: Timestamp reply
-------------------
1 = Timestamp reply
Type: Information request
----------------------
1 = Information request
Type: Information reply
--------------------
1 = Information reply
Type: Address mask request
------------------------
1 = Address mask request
Type: Address mask reply
----------------------
1 = Address mask reply"
::= { snAgAclEntry 30 }
snAgAclParameters OBJECT-TYPE
SYNTAX BITS {
matchFragmentedPackets (0),
matchNonFragmentedPackets (1),
matchTcpSynSetPackets (2),
permitFailedRPFCheckPackets (3),
mirrorPermitPackets (4),
sendPermitPacketsToSflowCollector (5),
dscpMappingFlagSet (6),
dscpMarkingFlagSet (7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This mask represents multiple parameters configured for this ACL.
Bit 0 specified in the BITS construct is the MS bit of the first octet.
Bit 0: Match fragmented IP packets
Bit 1: Match non-fragmented IP packets
Bit 2: Match only TCP packets with SYN Bit set. Valid only if snAgAclSourceOperator
or snAgAclDestinationOperator is set to TCP.
Bit 3: Permit packets that fail RPF check
Bit 4: Mirror packets matching ACL permit clause
Bit 5: Send packets matching ACL permit clause to sFlow collector
Bit 6: Set dscp-mapping. The value is given by snAgAclDscpMarking
Bit 7: Set dscp-marking. The value is given by snAgAclDscpMapping
"
::= { snAgAclEntry 31 }
--
-- Acl Port Table
--
-- snAgAclIfBindTable replaces snAgAclBindToPortTable
snAgAclBindToPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgAclBindToPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of ACL binding to port for router"
::= { snAgAcl 3 }
snAgAclBindToPortEntry OBJECT-TYPE
SYNTAX SnAgAclBindToPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ACL-binding-to-port table."
INDEX {
snAgAclPortNum,
snAgAclPortBindDirection
}
::= { snAgAclBindToPortTable 1 }
SnAgAclBindToPortEntry ::= SEQUENCE {
snAgAclPortNum
Integer32,
snAgAclPortBindDirection
Direction,
snAgAclNum
Integer32,
snAgAclNameString
DisplayString,
snAgBindPortListInVirtualInterface
OCTET STRING,
snAgAclPortRowStatus
SnRowStatus
}
snAgAclPortNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Binding-to port num, either physical port or virtual interface."
::= { snAgAclBindToPortEntry 1 }
snAgAclPortBindDirection OBJECT-TYPE
SYNTAX Direction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL port direction, inbound or outbound"
::= { snAgAclBindToPortEntry 2 }
snAgAclNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defined ACL number"
::= { snAgAclBindToPortEntry 3 }
snAgAclNameString OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defined ACL name"
::= { snAgAclBindToPortEntry 4 }
snAgBindPortListInVirtualInterface OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port list for binding virtual interface"
::= { snAgAclBindToPortEntry 5 }
snAgAclPortRowStatus OBJECT-TYPE
SYNTAX SnRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To create or delete a ACL port entry."
::= { snAgAclBindToPortEntry 6 }
--
-- Acl Port Table
--
snAgAclIfBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnAgAclIfBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of ACL binding to port for router"
::= { snAgAcl 4 }
snAgAclIfBindEntry OBJECT-TYPE
SYNTAX SnAgAclIfBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ACL-binding-to-port table."
INDEX {snAgAclIfBindIndex, snAgAclIfBindDirection}
::= { snAgAclIfBindTable 1 }
SnAgAclIfBindEntry ::= SEQUENCE {
snAgAclIfBindIndex
InterfaceIndex,
snAgAclIfBindDirection
Direction,
snAgAclIfBindNum
INTEGER,
snAgAclIfBindName
DisplayString,
snAgAclIfBindVifPortList
OCTET STRING,
snAgAclIfBindRowStatus
SnRowStatus,
snAgAclIfBindDenyLogging
INTEGER
}
snAgAclIfBindIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Binding-to port num, either physical port or virtual interface."
::= { snAgAclIfBindEntry 1 }
snAgAclIfBindDirection OBJECT-TYPE
SYNTAX Direction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL port direction, inbound or outbound"
::= { snAgAclIfBindEntry 2 }
snAgAclIfBindNum OBJECT-TYPE
SYNTAX INTEGER (0..199)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defined ACL number (0 represents named ACL)"
::= { snAgAclIfBindEntry 3 }
snAgAclIfBindName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defined ACL name"
::= { snAgAclIfBindEntry 4 }
snAgAclIfBindVifPortList OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the port list for binding virtual interface.
Each port index is an ifIndex, if there are consecutive 4 or more
ifIndex then, they will be encoded like below.
Encoding and decoding scheme is range based: Each range prefix with
0000 (2 octets) where 0000 is not valid ifIndex. Next 2 octets
indicates lower range ifIndex, followed by 2 octets of higher range
ifIndex. Individual(non range) ones will be displayed as it is.
Ex: port list: 0001..0005 0015 0032..0047
Port list in PDU: 0000 0001 0005 000f 0000 0020 002f."
::= { snAgAclIfBindEntry 5 }
snAgAclIfBindRowStatus OBJECT-TYPE
SYNTAX SnRowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To create or delete a ACL port entry."
::= { snAgAclIfBindEntry 6 }
snAgAclIfBindDenyLogging OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable deny logging."
::= { snAgAclIfBindEntry 7 }
--
-- Acl Accounting Table
--
agAclAccntTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgAclAccntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of ACL Accounting Statistics for router"
::= { snAgAcl 5 }
agAclAccntEntry OBJECT-TYPE
SYNTAX AgAclAccntEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ACL-binding-to-port table."
INDEX { agAclAccntKind, agAclAccntIfIndex, agAclAccntDirection, agAclAccntAclNumber, agAclAccntFilterId}
::= { agAclAccntTable 1 }
AgAclAccntEntry ::= SEQUENCE {
agAclAccntKind
INTEGER,
agAclAccntIfIndex
InterfaceIndex,
agAclAccntDirection
Direction,
agAclAccntAclNumber
AclNumber,
agAclAccntFilterId
Unsigned32,
agAclAccntAclName
AclNameString,
agAclAccntOneSecond
Counter64,
agAclAccntOneMinute
Counter64,
agAclAccntFiveMinute
Counter64,
agAclAccntCumulative
Counter64,
agAclAccntRaclDropCnt
Counter64,
agAclAccntRaclFwdCnt
Counter64,
agAclAccntRaclRemarkCnt
Counter64,
agAclAccntRaclTotalCnt
Counter64,
agAclAccntRaclTotalSWHitCountCnt
Counter64
}
agAclAccntKind OBJECT-TYPE
SYNTAX INTEGER {
ipv4(0),
l2(1),
policyBasedRouting(2),
rateLimit(3),
receiveAcl(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Kind of ACL Accounting statistics needed."
::= { agAclAccntEntry 1 }
agAclAccntIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Physical or virtual interface on which ACL accounting is desired.
For Receive ACL, we use the lowest port of the management module
as value for this object."
::= { agAclAccntEntry 2 }
agAclAccntDirection OBJECT-TYPE
SYNTAX Direction
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ACL port direction, inbound or outbound. For receive-acl kind, direction cannot be outbound."
::= { agAclAccntEntry 3 }
agAclAccntAclNumber OBJECT-TYPE
SYNTAX AclNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The access-list number for this entry."
::= { agAclAccntEntry 4 }
agAclAccntFilterId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"FilterId within a given ACL. This is a zero based value."
::= { agAclAccntEntry 5 }
agAclAccntAclName OBJECT-TYPE
SYNTAX AclNameString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ACL name for an entry, if applicable. Otherwise, null string is returned."
::= { agAclAccntEntry 6 }
agAclAccntOneSecond OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last one second accounting data."
::= { agAclAccntEntry 7 }
agAclAccntOneMinute OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last one minute accounting data."
::= { agAclAccntEntry 8 }
agAclAccntFiveMinute OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Last five minute accounting data."
::= { agAclAccntEntry 9 }
agAclAccntCumulative OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cummulative accounting data since the ACL was installed."
::= { agAclAccntEntry 10 }
agAclAccntRaclDropCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive-ACL drop counter used for rate limiting. Not used for other ACL kind.
The value returned is per ACL, instead of per filter within the ACL."
::= { agAclAccntEntry 11 }
agAclAccntRaclFwdCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive-ACL forward counter used for rate limiting. Not used for other ACL kind.
The value returned is per ACL, instead of per filter within the ACL."
::= { agAclAccntEntry 12 }
agAclAccntRaclRemarkCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive-ACL remark counter used for rate limiting. Not used for other ACL kind.
The value returned is per ACL, instead of per filter within the ACL."
::= { agAclAccntEntry 13 }
agAclAccntRaclTotalCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive-ACL total counter used for rate limiting. Not used for other ACL kind.
The value returned is per ACL, instead of per filter within the ACL."
::= { agAclAccntEntry 14 }
agAclAccntRaclTotalSWHitCountCnt OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Receive-ACL cumulative software hit counter. Not used for other ACL kind.
The value returned is per ACL, instead of per filter within the ACL."
::= { agAclAccntEntry 15 }
--
-- L2 ACL Next Clause Table
--
fdryL2AclNextClauseTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdryL2AclNextClauseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This read-only table contains the list of next lowest available clause index that
can be used for creating a new instance in the fdryL2AclTable.
The clause index values will not change as a result of switchovers or hitless upgrades,
but may change as a result of a device reload (though the relative order of persistent
entries would remain the same).
"
::= { snAgAcl 6 }
fdryL2AclNextClauseEntry OBJECT-TYPE
SYNTAX FdryL2AclNextClauseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry specifying the next lowest available clause index for this ACL number."
INDEX { fdryL2AclNumber }
::= { fdryL2AclNextClauseTable 1 }
FdryL2AclNextClauseEntry ::= SEQUENCE {
fdryL2AclNextClauseIndex
FdryClauseIndexTC
}
fdryL2AclNextClauseIndex OBJECT-TYPE
SYNTAX FdryClauseIndexTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next lowest available clause index for a given ACL number. The maximum value
of this object is the configured maximum number of clauses for a L2 ACL."
::= { fdryL2AclNextClauseEntry 1 }
--
-- L2 ACL Configuration Table
--
fdryL2AclTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdryL2AclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Layer 2 Access Control Lists. Layer 2 ACLs filter traffic
based on any of the following fields:
- Source MAC address and source MAC mask
- Destination MAC address and destination MAC mask
- VLAN ID
- Ethernet type.
For a given ACL number, one can have 64 (default) to 256 clauses.
The clause index values will not change as a result of switchovers or hitless upgrades,
but may change as a result of a device reload (though the relative order of persistent
entries would remain the same).
"
::= { snAgAcl 7 }
fdryL2AclEntry OBJECT-TYPE
SYNTAX FdryL2AclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the L2 Access Control List table."
INDEX { fdryL2AclNumber, fdryL2AclClauseIndex }
::= { fdryL2AclTable 1 }
FdryL2AclEntry ::= SEQUENCE {
fdryL2AclNumber
AclNumber,
fdryL2AclClauseIndex
FdryClauseIndexTC,
fdryL2AclAction
Action,
fdryL2AclSourceMac
MacAddress,
fdryL2AclSourceMacMask
MacAddress,
fdryL2AclDestinationMac
MacAddress,
fdryL2AclDestinationMacMask
MacAddress,
fdryL2AclVlanId
FdryVlanIdOrNoneTC,
fdryL2AclEthernetType
FdryEnetTypeOrZeroTC,
fdryL2AclDot1pPriority
PortQosTC,
fdryL2AclDot1pPriorityForce
PortQosTC,
fdryL2AclDot1pPriorityMapping
PortQosTC,
fdryL2AclMirrorPackets
TruthValue,
fdryL2AclLogEnable
TruthValue,
fdryL2AclRowStatus
RowStatus
}
fdryL2AclNumber OBJECT-TYPE
SYNTAX AclNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The access-list number for this entry.
For L2ACL, the valid values are between 400 and 599."
::= { fdryL2AclEntry 1 }
fdryL2AclClauseIndex OBJECT-TYPE
SYNTAX FdryClauseIndexTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of the clause within a given ACL number.
During row creation, the clause index value should match
with the next available clause index for a given ACL number.
It is advisable to first do a Get operation on the
fdryL2AclNextClauseTable for a given ACL number, and use
the value of fdryL2AclNextClauseIndex returned by the agent."
::= { fdryL2AclEntry 2 }
fdryL2AclAction OBJECT-TYPE
SYNTAX Action
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Action to take if the ingress L2 packet matches this ACL."
::= { fdryL2AclEntry 3 }
fdryL2AclSourceMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Optional Source MAC address. By default, it matches with
any source MAC within a packet."
DEFVAL { '000000000000'H }
::= { fdryL2AclEntry 4 }
fdryL2AclSourceMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Optional Source MAC address mask.
For Set operation, this object can only be used in
conjunction with fdryL2AclSourceMac.
By default, it matches with any source MAC within a packet.
it matches with any source MAC within a packet.
To match on the first two bytes of the address
aabb.ccdd.eeff, use the mask ffff.0000.0000. In this case,
the clause matches all source MAC addresses that contain
'aabb' as the first two bytes and any values in the
remaining bytes of the MAC address."
DEFVAL { '000000000000'H }
::= { fdryL2AclEntry 5 }
fdryL2AclDestinationMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Optional destination MAC address.
By default, it matches with any destination MAC within a packet."
DEFVAL { '000000000000'H }
::= { fdryL2AclEntry 6 }
fdryL2AclDestinationMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Optional destination MAC address mask.
For Set operation, this object can only be used in
conjunction with fdryL2AclDestinationMac.
By default, it matches with any destination MAC within a packet.
To match on the first two bytes of the address
aabb.ccdd.eeff, use the mask ffff.0000.0000. In this case,
the clause matches all destination MAC addresses that contain
'aabb' as the first two bytes and any values in the
remaining bytes of the MAC address."
DEFVAL { '000000000000'H }
::= { fdryL2AclEntry 7 }
fdryL2AclVlanId OBJECT-TYPE
SYNTAX FdryVlanIdOrNoneTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Optional VLAN ID to match against that of the incoming packet.
By default, the VLAN ID field is ignored during the match. In this case,
value 0 is returned."
DEFVAL { 0 }
::= { fdryL2AclEntry 8 }
fdryL2AclEthernetType OBJECT-TYPE
SYNTAX FdryEnetTypeOrZeroTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Optional Ethernet Type to match against the etype field
of the incoming packet.
By default, etype field is ignored during the match."
DEFVAL { invalid }
::= { fdryL2AclEntry 9 }
fdryL2AclDot1pPriority OBJECT-TYPE
SYNTAX PortQosTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority option assigns traffic that matches the ACL to a
hardware forwarding queue. In addition to changing the internal
forwarding priority, if the outgoing interface is an 802.1q interface,
this option maps the specified priority to its equivalent 802.1p (QoS)
priority and marks the packet with the new 802.1p priority.
This option is applicable for inbound ACLs only.
This object is not supported in RX, where it always returns
enum value invalid.
NOTE: fdryL2AclDot1pPriority following fdryL2AclDot1pPriorityForce
cannot be used together in an ACL entry."
DEFVAL { level0 }
::= { fdryL2AclEntry 10 }
fdryL2AclDot1pPriorityForce OBJECT-TYPE
SYNTAX PortQosTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority-force option assigns packets of outgoing traffic
that match the ACL to a specific hardware forwarding queue,
even though the incoming packet may be assigned to another queue.
This option is applicable for inbound ACLs only.
This object is not supported in RX, where it always returns
enum value invalid.
NOTE: fdryL2AclDot1pPriority following fdryL2AclDot1pPriorityForce
cannot be used together in an ACL entry."
DEFVAL { level0 }
::= { fdryL2AclEntry 11 }
fdryL2AclDot1pPriorityMapping OBJECT-TYPE
SYNTAX PortQosTC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority-mapping option matches on the packets 802.1p value.
This option does not change the packets forwarding priority through
the device or mark the packet. This keyword is applicable for both
inbound and outbound ACLs.
This object is not supported in RX, where it always returns
enum value invalid."
DEFVAL { level0 }
::= { fdryL2AclEntry 12 }
fdryL2AclMirrorPackets OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Mirror packets matching ACL permit clause."
DEFVAL { false }
::= { fdryL2AclEntry 13 }
fdryL2AclLogEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Optional parameter to enable logging only when deny clause
is specified. Note that traffic denied by implicit deny mechanism is not
subject to logging. The implicit deny kicks in when the traffic
does not match any of the clauses and there is no 'permit any any'
clause specified at the end."
DEFVAL { false }
::= { fdryL2AclEntry 14 }
fdryL2AclRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to active(1) or createAndGo(4) results in the
addition of a L2 ACL filter in the router. Duplicate entry will
be rejected during row creation. As part of row creation, we
support only appending to this table. Row insertion may not
be supported.
Setting this object to destroy(6) removes the associated filter
from the router. Other values in the enumeration are not used.
"
::= { fdryL2AclEntry 15 }
--
-- L2 ACL Binding Configuration Table
--
fdryL2AclIfBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF FdryL2AclIfBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of L2 ACL binding to port.
- One cannot bind Layer 2 ACLs and Layer 3 ACLs to the same port.
However, one can configure a port to use Layer 2 ACLs, and
another port on the same device to use Layer 3 ACLs.
- In general, Layer 2 ACLs cannot be bound to virtual interfaces, unlike L3 ACLs.
- One cannot modify an existing Layer 2 ACL clause. For that, one must
unbind the ACL, delete it and make a new clause.
"
::= { snAgAcl 8 }
fdryL2AclIfBindEntry OBJECT-TYPE
SYNTAX FdryL2AclIfBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the L2ACL binding table which lists the ACL bindings to a port.
"
INDEX {ifIndex, fdryL2AclIfBindDirection}
::= { fdryL2AclIfBindTable 1 }
FdryL2AclIfBindEntry ::= SEQUENCE {
fdryL2AclIfBindDirection
Direction,
fdryL2AclIfBindAclNumber
Unsigned32,
fdryL2AclIfBindRowStatus
RowStatus
}
fdryL2AclIfBindDirection OBJECT-TYPE
SYNTAX Direction
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Direction in which this ACL should be applied on this port."
::= { fdryL2AclIfBindEntry 1 }
fdryL2AclIfBindAclNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ACL number that is to be bound to given physical interface.
The valid values for L2 numbered ACLs are between 400 and 599."
::= { fdryL2AclIfBindEntry 2 }
fdryL2AclIfBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to active(1) or createAndGo(4) results in the
binding of a L2 ACL with a given physical port.
Setting this object to destroy(6) unbinds this L2 ACL from the port.
Other values in the enumeration are not used."
::= { fdryL2AclIfBindEntry 3 }
END