mibs/MIBS/ciena/CIENA-WWP-LEOS-PORT-MIB

1372 lines
55 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- This file was included in WWP MIB release 04-10-01-0027
--
-- WWP-LEOS-PORT-MIB.my
--
--
WWP-LEOS-PORT-MIB DEFINITIONS ::= BEGIN
IMPORTS
Integer32, Unsigned32, Counter32, Gauge32, TimeTicks, OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue, RowStatus
FROM SNMPv2-TC
sysName, sysLocation
FROM RFC1213-MIB
wwpModules, wwpModulesLeos
FROM WWP-SMI
dot3adAggPortActorAdminKey, dot3adAggPortListPorts
FROM IEEE8023-LAG-MIB;
wwpLeosPortMIB MODULE-IDENTITY
LAST-UPDATED "201205250000Z"
ORGANIZATION "Ciena, Inc"
CONTACT-INFO
"Mib Meister
115 North Sullivan Road
Spokane Valley, WA 99037
USA
Phone: +1 509 242 9000
Email: support@ciena.com"
DESCRIPTION
"This MIB defines the managed objects for Ethernet ports."
REVISION "201205250000Z"
DESCRIPTION
"Added wwpLeosEtherPortAdvertSpeed and wwpLeosEtherPortAdvertDuplex to WwpLeosEtherPortEntry MIB object"
REVISION "201102020000Z"
DESCRIPTION
"Added admitOnlyUntagged to wwpLeosEtherPortAcceptableFrameTypes MIB object"
REVISION "201011010000Z"
DESCRIPTION
"Added wwpLeosEtherPortEgressCosPolicy"
REVISION "201007280000Z"
DESCRIPTION
"Added wwpLeosEtherFixedRColor and wwpLeosEtherPortFrameCosMapId mib objects"
REVISION "201005051700Z"
DESCRIPTION
"Added changed length of wwpLeosPortDescr from 32 to 128."
REVISION "200811140000Z"
DESCRIPTION
"Added wwpLeosEtherPortEgressPortQueueMapId to wwpLeosEtherPortEntryTable.
Added 10 gig option to wwpLeosEtherInterfaceType, wwpLeosEtherAdminSpeed and wwpLeosEtherOperSpeed"
REVISION "200807210000Z"
DESCRIPTION
"Added wwpLeosEtherPortResolvedCosPolicy,wwpLeosEtherPortMode and wwpLeosEtherFixedRcos mib objects"
REVISION "200708110000Z"
DESCRIPTION
"Added new mib object wwpLeosEtherPortStateMirrorGroupType."
REVISION "200706200000Z"
DESCRIPTION
"Added new mib object wwpLeosEtherPortUntagDataVid."
REVISION "200605260000Z"
DESCRIPTION
"Added new mib object wwpLeosEtherPortOperAutoNeg."
REVISION "200605180000Z"
DESCRIPTION
"Added new mib object wwpLeosEtherPortStateMirrorGroupOperStatus.
Added new mib object wwpLeosEtherPortStateMirrorGroupNumSrcPorts.
Added new mib object wwpLeosEtherPortStateMirrorGroupNumDstPorts.
Added new mib object wwpLeosEtherPortStateMirrorGroupMemOperState."
REVISION "200603150000Z"
DESCRIPTION
"This MIB module is for the Extension of the dot1dBasePortTable for WWP Products"
REVISION "200507280000Z"
DESCRIPTION
"Added eumeration to wwpLeosEtherPortAdminSpeed."
REVISION "200404181700Z"
DESCRIPTION
"Added new tables to support port state mirroring feature."
::= { wwpModulesLeos 2 }
--
-- Textual conventions
--
PortList ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each octet within this value specifies a set of eight
ports, with the first octet specifying ports 1 through
8, the second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit represents
the lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port
is not included if its bit has a value of '0'."
SYNTAX OCTET STRING (SIZE (0..255))
PortEgressFrameCosPolicy ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Egress cos policy to use on this port
ignore means leave egress map disabled"
SYNTAX INTEGER {
ingore (1),
rcosToL2OuterPcpMap (2)
}
PortIngressFixedColor ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "Egress cos policy to use on this port
ignore means leave egress map disabled"
SYNTAX INTEGER {
green (1),
yellow (2)
}
--
-- Node definitions
--
wwpLeosPortMIBObjects OBJECT IDENTIFIER ::= { wwpLeosPortMIB 1 }
wwpLeosEtherPort OBJECT IDENTIFIER ::= { wwpLeosPortMIBObjects 1 }
wwpLeosEtherPortNotif OBJECT IDENTIFIER ::= { wwpLeosPortMIBObjects 2 }
-- Notifications
wwpLeosPortMIBNotificationPrefix OBJECT IDENTIFIER ::= { wwpLeosPortMIB 2 }
wwpLeosPortMIBNotifications OBJECT IDENTIFIER ::=
{ wwpLeosPortMIBNotificationPrefix 0 }
-- Conformance information
wwpLeosPortMIBConformance OBJECT IDENTIFIER ::= { wwpLeosPortMIB 3 }
wwpLeosPortMIBCompliances OBJECT IDENTIFIER ::= { wwpLeosPortMIBConformance 1 }
wwpLeosPortMIBGroups OBJECT IDENTIFIER ::= { wwpLeosPortMIBConformance 2 }
wwpLeosEtherPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosEtherPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Ethernet Ports."
::= { wwpLeosEtherPort 1 }
wwpLeosEtherPortEntry OBJECT-TYPE
SYNTAX WwpLeosEtherPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Entry in the Ethernet Port Table."
INDEX { wwpLeosEtherPortId }
::= { wwpLeosEtherPortTable 1 }
WwpLeosEtherPortEntry ::= SEQUENCE {
wwpLeosEtherPortId INTEGER,
wwpLeosEtherPortName DisplayString,
wwpLeosEtherPortDesc DisplayString,
wwpLeosEtherPortType INTEGER,
wwpLeosEtherPortPhysAddr MacAddress,
wwpLeosEtherPortAutoNeg TruthValue,
wwpLeosEtherPortAdminStatus INTEGER,
wwpLeosEtherPortOperStatus INTEGER,
wwpLeosEtherPortAdminSpeed INTEGER,
wwpLeosEtherPortOperSpeed INTEGER,
wwpLeosEtherPortAdminDuplex INTEGER,
wwpLeosEtherPortOperDuplex INTEGER,
wwpLeosEtherPortAdminFlowCtrl INTEGER,
wwpLeosEtherPortOperFlowCtrl INTEGER,
wwpLeosEtherIngressPvid INTEGER,
wwpLeosEtherUntagEgressVlanId INTEGER,
wwpLeosEtherPortAcceptableFrameTypes INTEGER,
wwpLeosEtherPortUntaggedPriority INTEGER,
wwpLeosEtherPortMaxFrameSize INTEGER,
wwpLeosEtherPortVlanIngressFiltering TruthValue,
wwpLeosEtherPortAdminAdvertisedFlowCtrl INTEGER,
wwpLeosEtherPortVplsPortType INTEGER,
wwpLeosEtherPortIngressCosPolicy INTEGER,
wwpLeosEtherPortIngressFixedDot1dPri INTEGER,
wwpLeosEtherPortUntagDataVsi INTEGER,
wwpLeosEtherPortOperationalSpeed Gauge32,
wwpLeosEtherPortUntagCtrlVsi INTEGER,
wwpLeosEtherPortMirrorPort TruthValue,
wwpLeosEtherPortMirrorEncap INTEGER,
wwpLeosEtherPortMirrorEncapVid INTEGER,
wwpLeosEtherPortMirrorEncapTpid INTEGER,
wwpLeosEtherPortMirrorIngress INTEGER,
wwpLeosEtherPortMirrorEgress INTEGER,
wwpLeosEtherPortUntagDataVsiType INTEGER,
wwpLeosEtherPortUntagCtrlVsiType INTEGER,
wwpLeosEtherPortVsIngressFiltering TruthValue,
wwpLeosEtherPortOperAutoNeg INTEGER,
wwpLeosEtherPortUpTime TimeTicks,
wwpLeosEtherPortUntagDataVid INTEGER,
wwpLeosEtherPortPhyLoopback TruthValue,
wwpLeosEtherPortVlanIngressFilterStrict TruthValue,
wwpLeosEtherPortMacSaDaSwap TruthValue,
wwpLeosEtherPortMacSaDaSwapVlan INTEGER,
wwpLeosEtherPortResolvedCosPolicy INTEGER,
wwpLeosEtherPortMode INTEGER,
wwpLeosEtherFixedRcos INTEGER,
wwpLeosEtherPortEgressPortQueueMapId INTEGER,
wwpLeosEtherPortResolvedCosMapId INTEGER,
wwpLeosEtherPortResolvedCosRemarkL2 TruthValue,
wwpLeosEtherPortL2TransformMode INTEGER,
wwpLeosEtherPortLinkFlapDetection TruthValue,
wwpLeosEtherPortLinkFlapCount INTEGER,
wwpLeosEtherPortLinkFlapDetectTime INTEGER,
wwpLeosEtherPortLinkFlapHoldTime INTEGER,
wwpLeosEtherFixedRColor PortIngressFixedColor,
wwpLeosEtherPortFrameCosMapId INTEGER,
wwpLeosEtherPortEgressCosPolicy PortEgressFrameCosPolicy,
wwpLeosEtherPortEgressSpeed Gauge32,
wwpLeosEtherPortAdaptiveRateSpeed Gauge32,
wwpLeosEtherPortIfgDecrease Integer32,
wwpLeosEtherPortAdvertSpeed INTEGER,
wwpLeosEtherPortAdvertDuplex INTEGER
}
wwpLeosEtherPortId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port ID for the instance. Port ID's start at 1,
and may not be consecutive for each additional port.
This port Id should refer to the dot1dBasePort in the
Dot1dBasePortEntry."
::= { wwpLeosEtherPortEntry 1 }
wwpLeosEtherPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A textual string containing information about the
port. This string should indicate about the physical
location of the port as well."
::= { wwpLeosEtherPortEntry 2 }
wwpLeosEtherPortDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual string containing port description."
::= { wwpLeosEtherPortEntry 3 }
wwpLeosEtherPortType OBJECT-TYPE
SYNTAX INTEGER {
ethernet(1),
fastEthernet(2),
hundredFx(3),
gigEthernet(4),
lagPort(5),
unknown(6),
gigHundredFx(7),
tripleSpeed(8),
tenGigEthernet(9),
gigTenGigEthernet(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port type for the port."
::= { wwpLeosEtherPortEntry 4 }
wwpLeosEtherPortPhysAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ethernet MAC address for the port. This information can also
be achieved via dot1dTpFdbTable"
::= { wwpLeosEtherPortEntry 5 }
wwpLeosEtherPortAutoNeg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object sets the port to AUTO NEG MOde and vice versa.
Specific platforms may have requirements of configuring
speed before moving the port to out of AUTO-NEG mode."
::= { wwpLeosEtherPortEntry 6 }
wwpLeosEtherPortAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired state of the port."
::= { wwpLeosEtherPortEntry 7 }
wwpLeosEtherPortOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
notauth(3),
lbtx(4),
lbrx(5),
linkflap(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of Port."
::= { wwpLeosEtherPortEntry 8 }
wwpLeosEtherPortAdminSpeed OBJECT-TYPE
SYNTAX INTEGER {
tenMb(1),
hundredMb(2),
gig(3),
auto(4),
tenGig(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Desired speed of the port.
Set the port speed to be either 10MB, 100MB, or gig. Set the
port speed to auto to enable automatic port speed detection.
The default value for this object depends upon the platform."
::= { wwpLeosEtherPortEntry 9 }
wwpLeosEtherPortOperSpeed OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
tenMb(1),
hundredMb(2),
gig(3),
tenGig(4)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The current operational speed of the port."
::= { wwpLeosEtherPortEntry 10 }
wwpLeosEtherPortAdminDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(1),
full(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The desired mode for the port. It can be set to either half or
full duplex operation. The default value for this object
depends upon the platform."
::= { wwpLeosEtherPortEntry 11 }
wwpLeosEtherPortOperDuplex OBJECT-TYPE
SYNTAX INTEGER {
half(1),
full(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current duplex mode of the port."
::= { wwpLeosEtherPortEntry 12 }
wwpLeosEtherPortAdminFlowCtrl OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
off(2),
asymTx(3),
asymRx(4),
sym(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the ports flow control operation."
::= { wwpLeosEtherPortEntry 13 }
wwpLeosEtherPortOperFlowCtrl OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
off(2),
asymTx(3),
asymRx(4),
sym(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Shows ports flow control configuration."
::= { wwpLeosEtherPortEntry 14 }
wwpLeosEtherIngressPvid OBJECT-TYPE
SYNTAX INTEGER (1..24576)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ingress PVID, the VLAN ID associated with untagged frames ingressing
the port or if tunnel is enabled on this port. The max value for this
object is platform dependent. Refer to architecture document for details
of platform dependency."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.1.1"
DEFVAL { 1 }
::= { wwpLeosEtherPortEntry 15 }
wwpLeosEtherUntagEgressVlanId OBJECT-TYPE
SYNTAX INTEGER (0..24576)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"All the egress frames whose VLAN id matches the wwpLeosEtherUntagEgressVlanId, will
egress the port as untagged. To egress the frames tagged set
wwpLeosEtherUntagEgressVlanId to 0. The max value for this object is
platform dependent. Refer to architecture document for
details of platform dependency."
::= { wwpLeosEtherPortEntry 16 }
wwpLeosEtherPortAcceptableFrameTypes OBJECT-TYPE
SYNTAX INTEGER {
admitAll(1),
admitOnlyVlanTagged(2),
admitOnlyUntagged(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames
received on this port. When admitOnlyUntagged(3) is set,
the device will discard VLAN tagged frames received on
this port. With admitOnlyUntagged(3) and admitAll(1),
untagged frames or Priority-Tagged frames received on this
port will be accepted and assigned to the PVID for this port.
This control does not affect VLAN independent BPDU
frames, such as GVRP and STP. It does affect VLAN
dependent BPDU frames, such as GMRP."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.1.3"
DEFVAL { admitAll }
::= { wwpLeosEtherPortEntry 17 }
wwpLeosEtherPortUntaggedPriority OBJECT-TYPE
SYNTAX INTEGER {
p0(0),
p1(1),
p2(2),
p3(3),
p4(4),
p5(5),
p6(6),
p7(7)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The 802.1p packet priority to be assigned to packets ingressing
this port that do not have an 802.1Q VLAN header. This priority
is also assigned to ingress frame if tunnel is enabled on this port."
::= { wwpLeosEtherPortEntry 18 }
wwpLeosEtherPortMaxFrameSize OBJECT-TYPE
SYNTAX INTEGER (1522..9216)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object will set the max frame size allowed on a
port. The max frame size can vary from 1522 bytes to 9216 bytes.
Default value is 1526 bytes."
::= { wwpLeosEtherPortEntry 19 }
wwpLeosEtherPortVlanIngressFiltering OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this is true(1) the device will discard incoming
frames for VLANs which do not include this Port in its
Member set. When false(2), the port will accept all
incoming frames."
DEFVAL { true }
::= { wwpLeosEtherPortEntry 20 }
wwpLeosEtherPortAdminAdvertisedFlowCtrl OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
off(2),
asymTx(3),
sym(4),
symAsymRx(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the advertised flow control
for given port."
::= { wwpLeosEtherPortEntry 21 }
wwpLeosEtherPortVplsPortType OBJECT-TYPE
SYNTAX INTEGER {
notDefined(1),
subscriber(2),
networkFacing(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies whether port is in subscriber type,
network facing side or both. "
::= { wwpLeosEtherPortEntry 22 }
wwpLeosEtherPortIngressCosPolicy OBJECT-TYPE
SYNTAX INTEGER {
leave(1),
fixed(2),
ippInherit(3),
phbgInherit(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the ingress cos policy to be applied to all
frames coming in on the given port."
::= { wwpLeosEtherPortEntry 23 }
wwpLeosEtherPortIngressFixedDot1dPri OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 802.1p packet priority to be assigned to packets ingressing
this port that do not have an 802.1Q VLAN header. This priority
is also assigned to ingress untagged frame if the virtual switch
cos policy is set to 'fix' for a given port."
::= { wwpLeosEtherPortEntry 24 }
wwpLeosEtherPortUntagDataVsi OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the virtual switch to be used for this
port if data frame is untagged. If this object is set to 0 then
device will unset this object.
When setting this object to Mpls Vsi Index then wwpLeosEtherPortUntagDataVsiType must also
be set to mpls (Use multiple set operation)"
::= { wwpLeosEtherPortEntry 25 }
wwpLeosEtherPortOperationalSpeed OBJECT-TYPE
SYNTAX Gauge32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the port's current bandwidth in k-bits per second
for given port."
::= { wwpLeosEtherPortEntry 26 }
wwpLeosEtherPortUntagCtrlVsi OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the virtual switch to be used for this
port if control frame is untagged. If this object is set to 0 then
device will unset this object.
When setting this object to Mpls Vsi Index then wwpLeosEtherPortUntagCtrlVsiType must also
be set to mpls (Use multiple set operation)"
::= { wwpLeosEtherPortEntry 27 }
wwpLeosEtherPortMirrorPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines whether the port will allow traffic from other ports to
be mirrored to this port.
To allow traffic from other ports to be sent to this port, set this object to
True(1). This port is known as a mirror port.
If set to true, then other ports may set the values of their
wwpLeosEtherPortMirrorIngress or wwpLeosEtherPortMirrorEgress
objects to the port index of this port.
Setting this object to false(2) disables this port as a mirror port."
DEFVAL { false }
::= { wwpLeosEtherPortEntry 28 }
wwpLeosEtherPortMirrorIngress OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is the port index of a mirror port. The ingress traffic
of this port can be mirrored by setting the destination port's wwpLeosEtherPortMirrorPort
object to true.
If the value of this object is set to zero this port's ingress traffic will not be mirrored."
DEFVAL {0}
::= { wwpLeosEtherPortEntry 29 }
wwpLeosEtherPortMirrorEgress OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is the port index of a mirror port. The egress traffic
of this port can be mirrored by setting the destination port's wwpLeosEtherPortMirrorPort
object to true.
If the value of this object is set to zero this port's egress traffic will not be mirrored."
DEFVAL {0}
::= { wwpLeosEtherPortEntry 30 }
wwpLeosEtherPortUntagDataVsiType OBJECT-TYPE
SYNTAX INTEGER {
ethernet(1),
mpls(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the virtual switch instance type associated with this
port. This object defaults to ethernet and specifies if
wwpLeosEtherPortUntagDataVsi belongs to ethernet virtual switch table
(wwpLeosVplsVirtualSwitchEthTable in WWP-LEOS-VPLS-MIB)
or mpls virtual switch table (wwpLeosVplsVirtualSwitchMplsTable in
WWP-LEOS-VPLS-MIB).
When setting wwpLeosEtherPortUntagDataVsi to MPLS Vsi Index then this object must also be set to
mpls (Use mutliple set operation)."
DEFVAL {ethernet}
::= { wwpLeosEtherPortEntry 31 }
wwpLeosEtherPortUntagCtrlVsiType OBJECT-TYPE
SYNTAX INTEGER {
ethernet(1),
mpls(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the virtual switch instance type associated with this
port. This object defaults to ethernet and specifies if
wwpLeosEtherPortUntagCtrlVsi belongs to ethernet virtual switch table
(wwpLeosVplsVirtualSwitchEthTable) or mpls virtual switch table
(wwpLeosVplsVirtualSwitchMplsTable).
When setting wwpLeosEtherPortUntagCtrlVsi to MPLS Vsi Index then this object must also be set to
mpls (Use mutliple set operation)"
DEFVAL {ethernet}
::= { wwpLeosEtherPortEntry 32 }
wwpLeosEtherPortVsIngressFiltering OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This item is applicable to this port when the port is
added as a per-port member to a virtual switch. If true(1) the device
will discard incoming tagged frames. If false(2) the device will
forwared incoming tagged frames so long as those customer tagged
frames do not match another virtual switch with this port included as
a per-port-per-vlan member."
DEFVAL { false }
::= { wwpLeosEtherPortEntry 33 }
wwpLeosEtherPortOperAutoNeg OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the operational auto neg state."
::= { wwpLeosEtherPortEntry 34 }
wwpLeosEtherPortUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object specifies the port up time in hundredths of a second."
::= { wwpLeosEtherPortEntry 35 }
wwpLeosEtherPortUntagDataVid OBJECT-TYPE
SYNTAX INTEGER (0..24576)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Ingress Untagged Data Vid, the VLAN ID stamped on untagged frames
ingressing the port or if tunnel is enabled on this port. To disable
tagging of untagged data on ingress write a value of 0. The max value
for this object is platform dependent. Refer to architecture document
for details of platform dependency."
REFERENCE
"IEEE 802.1Q/D11 Section 12.10.1.1"
DEFVAL { 1 }
::= { wwpLeosEtherPortEntry 36 }
wwpLeosEtherPortPhyLoopback OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines whether the phy has been placed in loopback mode,
which causes frames egressing the port to be looped back to the port."
DEFVAL { false }
::= { wwpLeosEtherPortEntry 37 }
wwpLeosEtherPortVlanIngressFilterStrict OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This item is applicable to this port when the port is
added as a to a virtual switch. If true(1) the legacy ingress filter behavior
will be enforced at member addition (drop bit will be set to drop untagged
traffic). If false, the splat bit will not be changed. Note that external
VLAN associations are also maintained when strict is false."
DEFVAL { false }
::= { wwpLeosEtherPortEntry 38 }
wwpLeosEtherPortMacSaDaSwap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines whether the MAC SA and DA will be swapped on
frames egressing the port. This only works on a 311V."
DEFVAL { false }
::= { wwpLeosEtherPortEntry 39 }
wwpLeosEtherPortMacSaDaSwapVlan OBJECT-TYPE
SYNTAX INTEGER (0..24576)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines whether the MAC SA and DA will be swapped on
specific VLAN frames egressing the port. This only works on a 311V."
DEFVAL { 0 }
::= { wwpLeosEtherPortEntry 40 }
wwpLeosEtherPortResolvedCosPolicy OBJECT-TYPE
SYNTAX INTEGER {
dot1d(1),
l3DscpCos(2),
fixedCos(3),
unknown(99)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" The Resolved Cost Policy.
Setting this attribute is not supported in leos version 4"
::= { wwpLeosEtherPortEntry 41 }
wwpLeosEtherPortMode OBJECT-TYPE
SYNTAX INTEGER {
rj45(1),
sfp(2),
default(3),
unknown(99)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode of the port
Setting this attribute is not supported in leos version 4"
::= { wwpLeosEtherPortEntry 42 }
wwpLeosEtherFixedRcos OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fixed Resolve Cost value.
Setting this attribute is not supported in leos version 4"
::= { wwpLeosEtherPortEntry 43 }
wwpLeosEtherPortEgressPortQueueMapId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Egress-port-Queue associated with this port.
Setting this attribute is not supported in leos version 4"
::= { wwpLeosEtherPortEntry 44 }
wwpLeosEtherPortResolvedCosMapId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RCOS map id for the port.
Setting this attribute is not supported in leos version 4"
::= { wwpLeosEtherPortEntry 45 }
wwpLeosEtherPortResolvedCosRemarkL2 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies whether to remark L2 based on L3. This applies when the
resolved cos policy is either l3-dscp-cos or dot1d-tag1-cos but not when it is
fixed-cos policy. Setting this attribute is not supported in leos version 4"
::= { wwpLeosEtherPortEntry 46 }
wwpLeosEtherPortL2TransformMode OBJECT-TYPE
SYNTAX INTEGER {
none(0),
iPush-e-Pop(1),
iStamp-Push-e-QualifiedPopStamp(2),
iPush-e-PopStamp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"L2 transform action for port.
Setting this attribute is not supported in leos version 4"
DEFVAL { 1 }
::= { wwpLeosEtherPortEntry 47 }
wwpLeosEtherPortLinkFlapDetection OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines whether link flap detection will be
enabled on the port."
DEFVAL { false }
::= { wwpLeosEtherPortEntry 48 }
wwpLeosEtherPortLinkFlapCount OBJECT-TYPE
SYNTAX INTEGER (1..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines how many link down events are required
to trigger a link flap event."
DEFVAL { 5 }
::= { wwpLeosEtherPortEntry 49 }
wwpLeosEtherPortLinkFlapDetectTime OBJECT-TYPE
SYNTAX INTEGER (1..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the time in seconds during which link
down events are accumlated to trigger a link flap event."
DEFVAL { 10 }
::= { wwpLeosEtherPortEntry 50 }
wwpLeosEtherPortLinkFlapHoldTime OBJECT-TYPE
SYNTAX INTEGER (0..600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the time in seconds that a port will
be operationally disabled after a link flap event, before
it is re-enabled. A value of zero causes the port to
remain disabled until manually enabled."
DEFVAL { 300 }
::= { wwpLeosEtherPortEntry 51 }
wwpLeosEtherFixedRColor OBJECT-TYPE
SYNTAX PortIngressFixedColor
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This sets the fixed color to green (default) or yellow.
Setting this attribute is not supported in saos version 4"
DEFVAL { 1 }
::= { wwpLeosEtherPortEntry 52 }
wwpLeosEtherPortFrameCosMapId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Frame COS map id for the port.
Setting this attribute is not supported in leos version 4"
DEFVAL { 1 }
::= { wwpLeosEtherPortEntry 53 }
wwpLeosEtherPortEgressCosPolicy OBJECT-TYPE
SYNTAX PortEgressFrameCosPolicy
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the egress frame cos policy
Setting this attribute is not supported in leos version 4"
DEFVAL { 1 }
::= { wwpLeosEtherPortEntry 54 }
wwpLeosEtherPortEgressSpeed OBJECT-TYPE
SYNTAX Gauge32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An estimate of the port's current egress bandwidth restriction
in k-bits per second for given port. A value of 0 means there
is no active restriction. This attribute not supported in leos
version 6"
::= { wwpLeosEtherPortEntry 55 }
wwpLeosEtherPortAdaptiveRateSpeed OBJECT-TYPE
SYNTAX Gauge32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "An estimate of the port's current adaptive-rate bandwidth restriction
in k-bits per second for given port. A value of 0 means there is no
active restriction. This attribute not supported in leos version 6"
::= { wwpLeosEtherPortEntry 56 }
wwpLeosEtherPortMirrorEncap OBJECT-TYPE
SYNTAX INTEGER {
none(0),
vlanTag(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines whether the port will encapsulate mirrored
frames by adding a vlan-tag. (Or, in the case where a mirrored
frame is already tagged, by adding a further vlan-tag to the frame)
To allow mirrored traffic to be encapsulated, set this object to
vlan-tag(1).
If set to vlan-tag, then the values of
wwpLeosEtherPortMirrorEncapVid and wwpLeosEtherPortMirrorEncapTpid
will be used to populate tag added to each mirrored frame.
Setting this object to none(0) indicates no tag is to be added
to the mirrored frames."
DEFVAL { none }
::= { wwpLeosEtherPortEntry 57 }
wwpLeosEtherPortMirrorEncapVid OBJECT-TYPE
SYNTAX INTEGER (0..24576)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the VID that will be added to mirrored frames
when the mirroring encapsulation mode is vlan-tag"
DEFVAL { 1 }
::= { wwpLeosEtherPortEntry 58 }
wwpLeosEtherPortMirrorEncapTpid OBJECT-TYPE
SYNTAX INTEGER {
tpid8100(1),
tpid9100(2),
tpid88A8(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the tpid used in the tag that is added to
mirrored frames, when the mirroring encapsulation mode is vlan-tag"
DEFVAL { tpid8100 }
::= { wwpLeosEtherPortEntry 59 }
wwpLeosEtherPortIfgDecrease OBJECT-TYPE
SYNTAX Integer32(0..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the number of bytes that will be subtracted
from the minimum standard IFG of 12 bytes as defined in IEEE 802.3.
SAOS 6.x only supports a value of 0 or 4."
DEFVAL { 0 }
::= { wwpLeosEtherPortEntry 60 }
wwpLeosEtherPortAdvertSpeed OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(1),
ten(2),
hundred(3),
gigabit(4),
ten-hundred-gigabit(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the speed capabilities that will be advertised during the auto-negotiation process."
DEFVAL { ten-hundred-gigabit }
::= { wwpLeosEtherPortEntry 61 }
wwpLeosEtherPortAdvertDuplex OBJECT-TYPE
SYNTAX INTEGER {
not-applicable(1),
half(2),
full(3),
half-full(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object defines the duplex capabilities that will be advertised during the auto-negotiation process."
DEFVAL { half-full }
::= { wwpLeosEtherPortEntry 62 }
--
-- Port Flush Table
--
wwpLeosEtherPortFlushTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosEtherPortFlushEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of port flush entries."
::= { wwpLeosEtherPort 2 }
wwpLeosEtherPortFlushEntry OBJECT-TYPE
SYNTAX WwpLeosEtherPortFlushEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Broadcast containment port entry in the Ethernet Port Table."
INDEX { wwpLeosEtherPortId }
::= { wwpLeosEtherPortFlushTable 1 }
WwpLeosEtherPortFlushEntry ::= SEQUENCE {
wwpLeosEtherPortFlushActivate TruthValue
}
wwpLeosEtherPortFlushActivate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'true' will cause
the Macs to be flushed for the port
specified by wwpLeosEtherPortId."
DEFVAL { false }
::= { wwpLeosEtherPortFlushEntry 1 }
--
-- Port Traps enable/disable
--
wwpLeosEtherPortTrapsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosEtherPortTrapsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Ethernet Ports Traps."
::= { wwpLeosEtherPort 3 }
wwpLeosEtherPortTrapsEntry OBJECT-TYPE
SYNTAX WwpLeosEtherPortTrapsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port Traps Entry in the Ethernet Port Trap Table."
INDEX { wwpLeosEtherPortId }
::= { wwpLeosEtherPortTrapsTable 1 }
WwpLeosEtherPortTrapsEntry ::= SEQUENCE {
wwpLeosEtherPortTrapsState INTEGER
}
wwpLeosEtherPortTrapsState OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object will enable or disable all traps on given port."
::= { wwpLeosEtherPortTrapsEntry 1 }
--
-- Port State Mirror Group Table
--
wwpLeosEtherPortStateMirrorGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosEtherPortStateMirrorGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table can be used to keep track of all the port state mirror
groups.
To create entry in this table along with indexes following mib
objects must be set using multiple set operation
wwpLeosEtherPortStateMirrorGroupName must be valid string.
wwpLeosEtherPortStateMirrorGroupStatus must be set."
::= { wwpLeosEtherPort 4 }
wwpLeosEtherPortStateMirrorGroupEntry OBJECT-TYPE
SYNTAX WwpLeosEtherPortStateMirrorGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table will define the port state mirror group."
INDEX { wwpLeosEtherPortStateMirrorGroupId }
::= { wwpLeosEtherPortStateMirrorGroupTable 1 }
WwpLeosEtherPortStateMirrorGroupEntry ::= SEQUENCE {
wwpLeosEtherPortStateMirrorGroupId INTEGER,
wwpLeosEtherPortStateMirrorGroupName DisplayString,
wwpLeosEtherPortStateMirrorGroupOperStatus INTEGER,
wwpLeosEtherPortStateMirrorGroupNumSrcPorts Counter32,
wwpLeosEtherPortStateMirrorGroupNumDstPorts Counter32,
wwpLeosEtherPortStateMirrorGroupOperStatus INTEGER,
wwpLeosEtherPortStateMirrorGroupStatus RowStatus,
wwpLeosEtherPortStateMirrorGroupType INTEGER
}
wwpLeosEtherPortStateMirrorGroupId OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib object is used as index in the table and is used
to identify the unique group id."
::= { wwpLeosEtherPortStateMirrorGroupEntry 1 }
wwpLeosEtherPortStateMirrorGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This mib object is used to specify the name of the group."
::= { wwpLeosEtherPortStateMirrorGroupEntry 2 }
wwpLeosEtherPortStateMirrorGroupOperStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib object is used to specify the operational status of the group."
::= { wwpLeosEtherPortStateMirrorGroupEntry 3 }
wwpLeosEtherPortStateMirrorGroupNumSrcPorts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib object is used to specify the total number of source ports
that exists in the group."
::= { wwpLeosEtherPortStateMirrorGroupEntry 4 }
wwpLeosEtherPortStateMirrorGroupNumDstPorts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib object is used to specify the total number of destination ports
that exists in the group."
::= { wwpLeosEtherPortStateMirrorGroupEntry 5 }
wwpLeosEtherPortStateMirrorGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table."
::= { wwpLeosEtherPortStateMirrorGroupEntry 6 }
wwpLeosEtherPortStateMirrorGroupType OBJECT-TYPE
SYNTAX INTEGER {
unidirectional(1),
bidirectional(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This mib object is used to specify the directional mode type for the
port state mirror group. A uni-directional(1) mirror group type will only
mirror the port state of the source port(s) to the destination port(s).
The bi-directional(2) mirror group type will mirror state of either the
source port(s) to the destination port(s) or the state of the destination
port(s) will be mirrored to the source port(s). Where there are more than
one source or destination ports the combined state of the source or destination
group will be the combined 'OR'ed status of all the ports in either the source
or destination groups. In other words, if one or more source ports is 'UP'
then the source group is 'UP' and the mirrored destination state may be 'UP'.
The default for this object type is uni-directional."
::= { wwpLeosEtherPortStateMirrorGroupEntry 7 }
--
-- Port State Mirror Group Membership Table
--
wwpLeosEtherPortStateMirrorGroupMemTable OBJECT-TYPE
SYNTAX SEQUENCE OF WwpLeosEtherPortStateMirrorGroupMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to keep track of port group membership."
::= { wwpLeosEtherPort 5 }
wwpLeosEtherPortStateMirrorGroupMemEntry OBJECT-TYPE
SYNTAX WwpLeosEtherPortStateMirrorGroupMemEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table is used to represent the membership of port
to a given group and group type."
INDEX { wwpLeosEtherPortStateMirrorGroupId, wwpLeosEtherPortId }
::= { wwpLeosEtherPortStateMirrorGroupMemTable 1 }
WwpLeosEtherPortStateMirrorGroupMemEntry ::= SEQUENCE {
wwpLeosEtherPortStateMirrorGroupMemType INTEGER,
wwpLeosEtherPortStateMirrorGroupMemOperState INTEGER,
wwpLeosEtherPortStateMirrorGroupMemStatus RowStatus
}
wwpLeosEtherPortStateMirrorGroupMemType OBJECT-TYPE
SYNTAX INTEGER {
srcPort(1),
dstPort(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this object will specify the type of group this port is member of for a given port state mirror
group. This object can only be set while creating the entry. This object cannot be modified once entry
is created."
DEFVAL { srcPort }
::= { wwpLeosEtherPortStateMirrorGroupMemEntry 1 }
wwpLeosEtherPortStateMirrorGroupMemOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This mib object is used to specify the operational status of the port."
::= { wwpLeosEtherPortStateMirrorGroupMemEntry 2 }
wwpLeosEtherPortStateMirrorGroupMemStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to manage the creation and deletion of the
conceptual rows in this table."
::= { wwpLeosEtherPortStateMirrorGroupMemEntry 3 }
--
-- Traps Defination
--
wwpLeosEtherStndLinkUpDownTrapsEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'false(2)' will cause
standard Link Up Down Traps to be suppressed."
DEFVAL { true }
::= { wwpLeosEtherPortNotif 1 }
wwpLeosEtherPortLinkUpDownTrapsEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'true(1)' will cause
wwp specific port up down trap to be generated."
DEFVAL { false }
::= { wwpLeosEtherPortNotif 2 }
wwpLeosEtherAggPortLinkUpDownTrapsEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to 'true(1)' will cause wwp
specific agg port up down trap to be generated
for a link state change on a physical port that
is a member of a agg."
DEFVAL { false }
::= { wwpLeosEtherPortNotif 3 }
wwpLeosEthLinkUp NOTIFICATION-TYPE
OBJECTS { sysName,
sysLocation,
wwpLeosEtherPortId,
wwpLeosEtherPortName,
wwpLeosEtherPortType,
wwpLeosEtherPortAdminStatus,
wwpLeosEtherPortOperStatus,
wwpLeosEtherPortDesc
}
STATUS current
DESCRIPTION
"A wwpLeosEthLinkUp trap signifies that the SNMP entity, acting in
an agent role, has detected that the ifOperStatus object for
one of its communication links has entered the up state."
::= { wwpLeosPortMIBNotifications 3 }
wwpLeosEthLinkDown NOTIFICATION-TYPE
OBJECTS { sysName,
sysLocation,
wwpLeosEtherPortId,
wwpLeosEtherPortType,
wwpLeosEtherPortName,
wwpLeosEtherPortAdminStatus,
wwpLeosEtherPortOperStatus,
wwpLeosEtherPortDesc
}
STATUS current
DESCRIPTION
"A wwpLeosEthLinkDown trap signifies that the SNMP entity, acting in
an agent role, has detected that the ifOperStatus object for
one of its communication links has entered the down state."
::= { wwpLeosPortMIBNotifications 4 }
wwpLeosEthAdminSpeedIncompatible NOTIFICATION-TYPE
OBJECTS { wwpLeosEtherPortId
}
STATUS current
DESCRIPTION
"A wwpLeosEthAdminSpeedIncompatible trap is generated when the port
administrative speed doesn't match the speed of the SFP transceiver
installed."
::= { wwpLeosPortMIBNotifications 5 }
wwpLeosEthLinkFlap NOTIFICATION-TYPE
OBJECTS { sysName,
sysLocation,
wwpLeosEtherPortId,
wwpLeosEtherPortType,
wwpLeosEtherPortName,
wwpLeosEtherPortOperStatus,
wwpLeosEtherPortDesc,
wwpLeosEtherPortLinkFlapHoldTime
}
STATUS current
DESCRIPTION
"A wwpLeosEthLinkFlap trap signifies that the SNMP entity,
acting in an agent role, has detected that the ifOperStatus
object for one of its communication links has been changed
due to link flap detection."
::= { wwpLeosPortMIBNotifications 6 }
wwpLeosAggLinkUpDown NOTIFICATION-TYPE
OBJECTS { sysName,
sysLocation,
wwpLeosEtherPortId,
wwpLeosEtherPortName,
wwpLeosEtherPortDesc,
wwpLeosEtherPortType,
wwpLeosEtherPortAdminStatus,
wwpLeosEtherPortOperStatus,
dot3adAggPortActorAdminKey,
dot3adAggPortListPorts,
wwpLeosEtherPortName,
wwpLeosEtherPortDesc
}
STATUS current
DESCRIPTION
"A wwpLeosAggLinkUpDown trap signifies that the SNMP entity,
acting in an agent role, has detected that the ifOperStatus
object for one of its communication links has changed state."
::= { wwpLeosPortMIBNotifications 7 }
END