mibs/MIBS/comware/HH3C-DOT11-RRM-MIB

1440 lines
44 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- ==========================================================================
-- Copyright (c) 2004-2017 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description: The purpose of this MIB file is to provide object definition
-- of WLAN radio resource management (RRM).
-- Reference:
-- Version: V1.9
-- History:
-- V1.0 2008-07-16 Initial version, created by ChenWei
-- V1.1 2009-04-16 modified by WangChunsheng
-- Add new table of hh3cDot11MonitorDetectedDevTable for hh3cDot11MonitorDetectedGroup.
-- Add new table of hh3cDot11RRMAPCfgTable for hh3cDot11RRMConfigGroup.
-- V1.2 2009-05-07 modified by Wang Shaojie, wangchunsheng
-- Add hh3cDot11APInterfNumThreshhd, hh3cDot11StaInterfNumThreshhd
-- to hh3cDot11GlobeConfigGroup.
-- Modify hh3cDot11RRMCfgIntrvl
-- V1.3 2009-05-07 modified by Wang Shaojie
-- Add new node hh3cDot11MonitorDevSNR to hh3cDot11MonitorDetectedDevTable
-- V1.4 2010-02-22 modified by Wang Chunsheng
-- Add new table hh3cDot11RRMSDRadioGroupTable to hh3cDot11RRMConfigGroup
-- 2010-03-18 Modified by Wang Lu
-- Add hh3cDot11RRMAPCfg2Table
-- V1.5 2010-09-21 Modified by wu xiaopeng
-- Add new node hh3cDot11RRMCoChlIntfTrapThhd, hh3cDot11RRMAdjChlIntfTrapThhd
-- to hh3cDot11RRMAPCfg2Table
-- 2011-03-23 Modified by NiuJian
-- Add new node hh3cDot11RrmNbrSSID
-- to hh3cDot11RRMNbrInfoTable
-- V1.6 2013-03-23 Modified by GaoFei
-- Change SYNTAX of hh3cDot11RRMCfgPERThres,hh3cDot11RRMCfgToleranceFctr
-- V1.7 2013-09-02 Modified by Zhang Siyu
-- Add new table hh3cDot11RRMRadioNbrInfoTable to hh3cDot11RRMDetectGroup
-- 2013-11-19 Modified by wubin
-- Add new node hh3cDot11RRM11nMultiCastMcs
-- to hh3cDot11RRMGlobalCfgPara
-- 2013-12-21 Modified by wubin
-- Add new node hh3cDot11RRM11acMadtMaxNss, hh3cDot11RRM11acSuptMaxNss,
-- hh3cDot11RRM11acMultiCastNss, hh3cDot11RRM11acMultiCastVhtMcs
-- to hh3cDot11RRMGlobalCfgPara
-- V1.8 2014-05-07 Modified by yubo
-- Change SYNTAX of hh3cDot11RRMCfgIntrfThres.
-- V1.9 2017-05-22 Modified by weizhiguang
-- Add new node hh3cDot11RrmNbrSNR, hh3cDot11RrmNbrNF
-- to Hh3cDot11RRMNbrInfoEntry
-- ==========================================================================
HH3C-DOT11-RRM-MIB DEFINITIONS ::= BEGIN
IMPORTS
Hh3cDot11RadioType, Hh3cDot11ChannelScopeType, Hh3cDot11RadioElementIndex,
Hh3cDot11RadioScopeType, hh3cDot11APElementIndex
FROM HH3C-DOT11-REF-MIB
Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
TruthValue, MacAddress, DateAndTime, RowStatus
FROM SNMPv2-TC
hh3cDot11,
Hh3cDot11ObjectIDType,
Hh3cDot11SSIDStringType
FROM HH3C-DOT11-REF-MIB;
hh3cDot11RRM MODULE-IDENTITY
LAST-UPDATED "201705221600Z" -- May 22, 2017 at 16:00 GMT
ORGANIZATION
"New H3C Technologies Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Technologies Co., Ltd.
Hai-Dian District Beijing P.R.China
Http://www.h3c.com
Zip: 100085"
DESCRIPTION
"This MIB file is to provide the object definition of
WLAN radio resource management (RRM)."
REVISION "201705221600Z" -- May 22, 2017 at 16:00 GMT
DESCRIPTION
"Modified to add new nodes."
REVISION "201009251800Z" -- Sep 25, 2010 at 18:00 GMT
DESCRIPTION
"Modified to add new nodes."
REVISION "201002231800Z" -- Feb 23, 2010 at 18:00 GMT
DESCRIPTION
"Modified to add new nodes."
REVISION "200908012000Z" -- Aug 1, 2009 at 20:00 GMT
DESCRIPTION
"Modified to add new nodes and new table."
REVISION "200905072000Z" -- May 7, 2009 at 20:00 GMT
DESCRIPTION
"Modified to add new nodes and new table."
REVISION "200904172000Z" -- April 17, 2009 at 20:00 GMT
DESCRIPTION
"Modified to add new table and new group."
REVISION "200807141429Z"
DESCRIPTION
"The initial revision of this MIB module."
::= { hh3cDot11 8 }
--
-- Node definitions
--
hh3cDot11RRMConfigGroup OBJECT IDENTIFIER ::= { hh3cDot11RRM 1 }
hh3cDot11RRMGlobalCfgPara OBJECT IDENTIFIER ::= { hh3cDot11RRMConfigGroup 1 }
hh3cDot11RRM11nMadtMaxMcs OBJECT-TYPE
SYNTAX Integer32 (0..76 | 255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the maximum modulation and coding scheme (MCS) index for
802.11n mandatory rates.
The value 255 indicates that no maximum MCS index
is specified. No maximum MCS index is specified for 802.11n
mandatory rates by default.
Besides 255, the specified maximum MCS index for 802.11n supported
rates must be no less than the specified maximum MCS index for 802.11n
mandatory rates."
DEFVAL { 255 }
::= { hh3cDot11RRMGlobalCfgPara 1 }
hh3cDot11RRM11nSuptMaxMcs OBJECT-TYPE
SYNTAX Integer32 (0..76)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the maximum Modulation and Coding Scheme (MCS) index for
802.11n supported rates.
The specified maximum MCS index for 802.11n supported rates must be no
less than the specified maximum MCS index for 802.11n mandatory rates."
DEFVAL { 76 }
::= { hh3cDot11RRMGlobalCfgPara 2 }
hh3cDot11RRM11gProtect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable dot11g protection."
DEFVAL { false }
::= { hh3cDot11RRMGlobalCfgPara 3 }
hh3cDot11RRM11aPwrConstrt OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the power constraint for all 802.11a radios.
The configured power constraint is advertised in beacons if spectrum
management is enabled.
The range of power constraint is 0 to MAX-POWER-1 (where the MAX-POWER
is defined by the regulatory domain)."
DEFVAL { 0 }
::= { hh3cDot11RRMGlobalCfgPara 4 }
hh3cDot11RRM11aSpectrumManag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable spectrum management for 802.11a radios.
When spectrum management is enabled, the WLAN sub-system advertises
power capabilities of the AP and power constraints applicable to all
devices in the BSS based on regulatory domain specification."
DEFVAL { false }
::= { hh3cDot11RRMGlobalCfgPara 5 }
hh3cDot11RRMAutoChlAvoid11h OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the auto-channel set as non-dot11h channels, this is,
only the non-dot11h channels belonging to the country code are scanned
during initial channel selection and one of them is selected."
DEFVAL { false }
::= { hh3cDot11RRMGlobalCfgPara 6 }
hh3cDot11RRMScanChl OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
all(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the scan mode.
auto: When this option is set, all channels of the country code being
set are scanned.
all: When this option is set, all the channels of the radio band are
scanned."
DEFVAL { auto }
::= { hh3cDot11RRMGlobalCfgPara 7 }
hh3cDot11RRMScanRptIntvel OBJECT-TYPE
SYNTAX Integer32 (5..120)
UNITS "second"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the scan report interval."
DEFVAL { 10 }
::= { hh3cDot11RRMGlobalCfgPara 8 }
hh3cDot11APInterfNumThreshhd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents threshold of AP interference .
If the value of AP interference exceeds this threshold,
AP interference trap will be sent. If the value of this node
is zero, AP interference trap will be sent immediately."
DEFVAL { 0 }
::= { hh3cDot11RRMGlobalCfgPara 9 }
hh3cDot11StaInterfNumThreshhd OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents threshold of STA interference.
If the value of STA interference exceeds this threshold,
STA interference trap will be sent. If the value of this
node is zero, STA interference trap will be sent immediately.
"
DEFVAL { 0 }
::= { hh3cDot11RRMGlobalCfgPara 10 }
hh3cDot11RRM11nMultiCastMcs OBJECT-TYPE
SYNTAX Unsigned32 (0..76 | 4294967295)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the modulation and coding scheme (MCS) index for 802.11n
multicast rates.
The value 4294967295 indicates that no MCS index is specified.
No MCS index is specified for 802.11n multicast rates by default.
Besides 4294967295, the specified MCS index for 802.11n multicast
rates must be no less than the specified maximum MCS index for 802.11n
mandatory rates.
Before configure the MCS index for 802.11n multicast rates, the maximum
MCS index for 802.11n mandatory rates must be configured"
DEFVAL { 4294967295 }
::= { hh3cDot11RRMGlobalCfgPara 11 }
hh3cDot11RRM11acMadtMaxNss OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the maximum NSS index for 802.11ac mandatory rates.
The value 0 indicates that no maximum NSS index is specified.
No maximum NSS index is specified for 802.11ac mandatory rates by default.
The specified maximum NSS index for 802.11ac supported rates must be no less
than the specified maximum NSS index for 802.11ac mandatory rates."
DEFVAL { 0 }
::= { hh3cDot11RRMGlobalCfgPara 12 }
hh3cDot11RRM11acSuptMaxNss OBJECT-TYPE
SYNTAX Integer32 (1..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the maximum NSS index for 802.11ac supported rates.
The specified maximum NSS index for 802.11ac supported rates must be no
less than the specified maximum NSS index for 802.11ac mandatory rates."
DEFVAL { 8 }
::= { hh3cDot11RRMGlobalCfgPara 13 }
hh3cDot11RRM11acMultiCastNss OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the NSS index for 802.11ac multicast rates.
The value 0 indicates that no NSS index is specified.
No NSS index is specified for 802.11ac multicast rates by default.
The specified NSS index for 802.11ac multicast rates must be no less
than the specified maximum NSS index for 802.11ac mandatory rates.
Before configuring the NSS index for 802.11ac multicast rates, the maximum
NSS index for 802.11ac mandatory rates must be configured.
Besides, it must be configured together with the node below."
DEFVAL { 0 }
::= { hh3cDot11RRMGlobalCfgPara 14 }
hh3cDot11RRM11acMultiCastVhtMcs OBJECT-TYPE
SYNTAX Integer32 (0..9 | 255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the MCS index for 802.11ac multicast rates.
The value 255 indicates that no MCS index is specified.
No MCS index is specified for 802.11ac multicast rates by default.
Besides, it must be configured together with the node above."
DEFVAL { 255 }
::= { hh3cDot11RRMGlobalCfgPara 15 }
hh3cDot11RRMRadioCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11RRMRadioCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure WLAN RRM based radio type.
When 802.11b parameter is modified, 802.11g parameter will be
changed at the same time.
In the same way, when 802.11g parameter is modified, 802.11b parameter
will be changed at the same time."
::= { hh3cDot11RRMConfigGroup 2 }
hh3cDot11RRMRadioCfgEntry OBJECT-TYPE
SYNTAX Hh3cDot11RRMRadioCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configure WLAN RRM based radio type.
When 802.11b parameter is modified, 802.11g parameter will be
changed at the same time.
In the same way, when 802.11g parameter is modified, 802.11b parameter
will be changed at the same time."
INDEX { hh3cDot11RRMRadioType }
::= { hh3cDot11RRMRadioCfgTable 1 }
Hh3cDot11RRMRadioCfgEntry ::=
SEQUENCE {
hh3cDot11RRMRadioType
Hh3cDot11RadioType,
hh3cDot11RRMCfgChlState
TruthValue,
hh3cDot11RRMCfgChlMode
INTEGER,
hh3cDot11RRMChlProntoRadioElmt
Unsigned32,
hh3cDot11RRMCfgPwrState
TruthValue,
hh3cDot11RRMCfgPwrMode
INTEGER,
hh3cDot11RRMPwrProntoRadioElmt
Unsigned32,
hh3cDot11RRMCfgIntrvl
Integer32,
hh3cDot11RRMCfgIntrfThres
Integer32,
hh3cDot11RRMCfgNoiseThres
Integer32,
hh3cDot11RRMCfgPERThres
Integer32,
hh3cDot11RRMCfgToleranceFctr
Integer32,
hh3cDot11RRMCfgAdjacencyFctr
Integer32
}
hh3cDot11RRMRadioType OBJECT-TYPE
SYNTAX Hh3cDot11RadioType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"802.11 radio type."
::= { hh3cDot11RRMRadioCfgEntry 1 }
hh3cDot11RRMCfgChlState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable dynamic channel selection."
DEFVAL { false }
::= { hh3cDot11RRMRadioCfgEntry 2 }
hh3cDot11RRMCfgChlMode OBJECT-TYPE
SYNTAX INTEGER
{
selfDecisive(1),
userTriggered(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the mode of channel selection.
This node can be configured only when dynamic channel selection
is enabled."
DEFVAL { userTriggered }
::= { hh3cDot11RRMRadioCfgEntry 3 }
hh3cDot11RRMChlProntoRadioElmt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the AP and radio that will change channel at next
calibration cycle.
0 is returned when getting the value of this node.
This node can be configured only when the mode of channel selection
control is user-triggered.
When configuring, the higher 24 bits stand for the AP index,
and the last 8 bits stand for the radio index.
4294967295 stand for configuring each radio on all APs."
DEFVAL { 0 }
::= { hh3cDot11RRMRadioCfgEntry 4 }
hh3cDot11RRMCfgPwrState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/Disable dynamic power selection for the band."
DEFVAL { false }
::= { hh3cDot11RRMRadioCfgEntry 5 }
hh3cDot11RRMCfgPwrMode OBJECT-TYPE
SYNTAX INTEGER
{
selfDecisive(1),
userTriggered(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the mode of transmit power control.
This node can be configured only when dynamic power selection
is enabled."
DEFVAL { userTriggered }
::= { hh3cDot11RRMRadioCfgEntry 6 }
hh3cDot11RRMPwrProntoRadioElmt OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the AP and radio that will change power at next
calibration cycle.
0 is returned when getting the value of this node.
This node can be configured only when the mode of transmit power
control is user-triggered.
When configuring, the higher 24 bits stand for the AP index,
and the last 8 bits stand for the radio index.
4294967295 stand for configuring each radio on all APs."
DEFVAL { 0 }
::= { hh3cDot11RRMRadioCfgEntry 7 }
hh3cDot11RRMCfgIntrvl OBJECT-TYPE
SYNTAX Integer32
UNITS "minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the calibration interval."
DEFVAL { 8 }
::= { hh3cDot11RRMRadioCfgEntry 8 }
hh3cDot11RRMCfgIntrfThres OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the interface threshold.
By default, interference observed on an operating channel is considered
during dynamic frequency selection and transmit power control. If the
interference percentage on the channel reaches the set threshold, RRM
will perform resource adjustment to control the situation."
DEFVAL { 50 }
::= { hh3cDot11RRMRadioCfgEntry 9 }
hh3cDot11RRMCfgNoiseThres OBJECT-TYPE
SYNTAX Integer32 (-127..127)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the noise threshold."
DEFVAL { -70 }
::= { hh3cDot11RRMRadioCfgEntry 10 }
hh3cDot11RRMCfgPERThres OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the CRC error threshold.
If the percentage of CRC errors reaches the threshold, RRM will perform
resource adjustment to control the situation."
DEFVAL { 20 }
::= { hh3cDot11RRMRadioCfgEntry 11 }
hh3cDot11RRMCfgToleranceFctr OBJECT-TYPE
SYNTAX Integer32 (1..45)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the tolerance level.
During dynamic frequency selection (DFS), the channel will be changed
only if there is a better channel having lesser interference and packet
error rate than those specified by the user."
DEFVAL { 20 }
::= { hh3cDot11RRMRadioCfgEntry 12 }
hh3cDot11RRMCfgAdjacencyFctr OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the adjacency factor for the band.
If transmit power control (TPC) is configured, power will be adjusted
when the nth neighbor is detected. The value n is the adjacency factor."
DEFVAL { 3 }
::= { hh3cDot11RRMRadioCfgEntry 13 }
hh3cDot11RRMAPCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11RRMAPCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the RRM parameters for AP."
::= { hh3cDot11RRMConfigGroup 3 }
hh3cDot11RRMAPCfgEntry OBJECT-TYPE
SYNTAX Hh3cDot11RRMAPCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information of RRM parameters for AP."
INDEX { hh3cDot11APElementIndex }
::= { hh3cDot11RRMAPCfgTable 1 }
Hh3cDot11RRMAPCfgEntry ::=
SEQUENCE {
hh3cDot11RRMAPWorkMode
INTEGER
}
hh3cDot11RRMAPWorkMode OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
monitor(2),
hybrid(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AP work mode."
::= { hh3cDot11RRMAPCfgEntry 1 }
hh3cDot11RRMSDRadioGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11RRMSDRadioGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines RRM self-decisive radio group."
::= { hh3cDot11RRMConfigGroup 4 }
hh3cDot11RRMSDRadioGroupEntry OBJECT-TYPE
SYNTAX Hh3cDot11RRMSDRadioGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information of one RRM self-decisive radio group."
INDEX
{
hh3cDot11RRMSDRadioGroupId
}
::= { hh3cDot11RRMSDRadioGroupTable 1 }
Hh3cDot11RRMSDRadioGroupEntry ::= SEQUENCE
{
hh3cDot11RRMSDRadioGroupId Unsigned32,
hh3cDot11RRMSDRadioGroupDesc OCTET STRING,
hh3cDot11RRMSDRdGrpChlHolddownTm Unsigned32,
hh3cDot11RRMSDRdGrpPwrHolddownTm Unsigned32,
hh3cDot11RRMSDRdGroupRowStatus RowStatus
}
hh3cDot11RRMSDRadioGroupId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents RRM self-decisive radio group ID."
::= { hh3cDot11RRMSDRadioGroupEntry 1 }
hh3cDot11RRMSDRadioGroupDesc OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the description of RRM self-decisive radio group."
::= { hh3cDot11RRMSDRadioGroupEntry 2 }
hh3cDot11RRMSDRdGrpChlHolddownTm OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minute"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the channel holddown time of RRM self-decisive radio group."
::= { hh3cDot11RRMSDRadioGroupEntry 3 }
hh3cDot11RRMSDRdGrpPwrHolddownTm OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minute"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Represents the power holddown time of RRM self-decisive radio group."
::= { hh3cDot11RRMSDRadioGroupEntry 4 }
hh3cDot11RRMSDRdGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status of this table entry."
::= { hh3cDot11RRMSDRadioGroupEntry 5 }
hh3cDot11RRMAPCfg2Table OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11RRMAPCfg2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the RRM parameters for AP."
::= { hh3cDot11RRMConfigGroup 5 }
hh3cDot11RRMAPCfg2Entry OBJECT-TYPE
SYNTAX Hh3cDot11RRMAPCfg2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information of RRM parameters for AP."
INDEX { hh3cDot11RRMAPSerialID }
::= { hh3cDot11RRMAPCfg2Table 1 }
Hh3cDot11RRMAPCfg2Entry ::=
SEQUENCE {
hh3cDot11RRMAPSerialID
Hh3cDot11ObjectIDType,
hh3cDot11RRMAPIntfThreshold
Integer32,
hh3cDot11RRMStaIntfThreshold
Integer32,
hh3cDot11RRMCoChlIntfTrapThhd
Integer32,
hh3cDot11RRMAdjChlIntfTrapThhd
Integer32
}
hh3cDot11RRMAPSerialID OBJECT-TYPE
SYNTAX Hh3cDot11ObjectIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Serial ID of the AP."
::= { hh3cDot11RRMAPCfg2Entry 1 }
hh3cDot11RRMAPIntfThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents threshold of AP interference .
If the number of AP interference exceeds this threshold,
AP interference trap will be sent."
::= { hh3cDot11RRMAPCfg2Entry 2 }
hh3cDot11RRMStaIntfThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents threshold of STA interference.
If the number of STA interference exceeds this threshold,
station interference trap will be sent."
::= { hh3cDot11RRMAPCfg2Entry 3 }
hh3cDot11RRMCoChlIntfTrapThhd OBJECT-TYPE
SYNTAX Integer32
UNITS "dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents threshold of interference trap with current ap.
If signal strength of the device exceeds this threshold,
corresponding trap will be sent."
::= { hh3cDot11RRMAPCfg2Entry 4 }
hh3cDot11RRMAdjChlIntfTrapThhd OBJECT-TYPE
SYNTAX Integer32
UNITS "dbm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Represents threshold of adjacent interference trap with current ap.
If signal strength of the device exceeds this threshold,
corresponding trap will be sent."
::= { hh3cDot11RRMAPCfg2Entry 5 }
hh3cDot11RRMDetectGroup OBJECT IDENTIFIER ::= { hh3cDot11RRM 2 }
hh3cDot11RRMChlRptTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11RRMChlRptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows the RRM channel information of each radio
on all APs."
::= { hh3cDot11RRMDetectGroup 1 }
hh3cDot11RRMChlRptEntry OBJECT-TYPE
SYNTAX Hh3cDot11RRMChlRptEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information of RRM channel information
of the radio on the AP."
INDEX { hh3cDot11RRMRadioIndex, hh3cDot11RRMChlRptChlNum }
::= { hh3cDot11RRMChlRptTable 1 }
Hh3cDot11RRMChlRptEntry ::=
SEQUENCE {
hh3cDot11RRMRadioIndex
Hh3cDot11RadioElementIndex,
hh3cDot11RRMChlRptChlNum
Integer32,
hh3cDot11RRMChlRptChlType
INTEGER,
hh3cDot11RRMChlRptChlQlty
INTEGER,
hh3cDot11RRMChlRptNbrCnt
Integer32,
hh3cDot11RRMChlRptLoad
Integer32,
hh3cDot11RRMChlRptUtlz
Integer32,
hh3cDot11RRMChlRptIntrf
Integer32,
hh3cDot11RRMChlRptPER
Integer32,
hh3cDot11RRMChlRptRetryRate
Integer32,
hh3cDot11RRMChlRptNoise
Integer32,
hh3cDot11RRMChlRptRadarIndtcr
INTEGER
}
hh3cDot11RRMRadioIndex OBJECT-TYPE
SYNTAX Hh3cDot11RadioElementIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Represents index of the radio."
::= { hh3cDot11RRMChlRptEntry 1 }
hh3cDot11RRMChlRptChlNum OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Channel number."
::= { hh3cDot11RRMChlRptEntry 2 }
hh3cDot11RRMChlRptChlType OBJECT-TYPE
SYNTAX INTEGER
{
primeChannel(1),
offChannel(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel type."
::= { hh3cDot11RRMChlRptEntry 3 }
hh3cDot11RRMChlRptChlQlty OBJECT-TYPE
SYNTAX INTEGER
{
good(1),
bad(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel quality."
::= { hh3cDot11RRMChlRptEntry 4 }
hh3cDot11RRMChlRptNbrCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of neighbors found on the channel."
::= { hh3cDot11RRMChlRptEntry 5 }
hh3cDot11RRMChlRptLoad OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Load observed on the channel in percentage."
::= { hh3cDot11RRMChlRptEntry 6 }
hh3cDot11RRMChlRptUtlz OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Utilization of the channel in percentage."
::= { hh3cDot11RRMChlRptEntry 7 }
hh3cDot11RRMChlRptIntrf OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interference observed on the channel in percentage."
::= { hh3cDot11RRMChlRptEntry 8 }
hh3cDot11RRMChlRptPER OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet error rate observed on the channel in percentage."
::= { hh3cDot11RRMChlRptEntry 9 }
hh3cDot11RRMChlRptRetryRate OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of retransmission happened on the channel."
::= { hh3cDot11RRMChlRptEntry 10 }
hh3cDot11RRMChlRptNoise OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Noise observed on the channel."
::= { hh3cDot11RRMChlRptEntry 11 }
hh3cDot11RRMChlRptRadarIndtcr OBJECT-TYPE
SYNTAX INTEGER
{
detected(1),
notDetected(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radar detection status."
::= { hh3cDot11RRMChlRptEntry 12 }
hh3cDot11RRMNbrInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11RRMNbrInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows the RRM neighbor information of each radio
on all APs."
::= { hh3cDot11RRMDetectGroup 2 }
hh3cDot11RRMNbrInfoEntry OBJECT-TYPE
SYNTAX Hh3cDot11RRMNbrInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information of RRM neighbor information
of the radio on an AP."
INDEX { hh3cDot11RRMRadioIndex, hh3cDot11RrmNbrBSSID }
::= { hh3cDot11RRMNbrInfoTable 1 }
Hh3cDot11RRMNbrInfoEntry ::=
SEQUENCE {
hh3cDot11RrmNbrBSSID
MacAddress,
hh3cDot11RrmNbrChl
Hh3cDot11ChannelScopeType,
hh3cDot11RRMNbrIntrf
Integer32,
hh3cDot11RrmNbrRSSI
Integer32,
hh3cDot11RrmNbrType
INTEGER,
hh3cDot11RrmNbrSSID
Hh3cDot11SSIDStringType,
hh3cDot11RrmNbrSNR
Integer32,
hh3cDot11RrmNbrNF
Integer32
}
hh3cDot11RrmNbrBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC address of the AP."
::= { hh3cDot11RRMNbrInfoEntry 1 }
hh3cDot11RrmNbrChl OBJECT-TYPE
SYNTAX Hh3cDot11ChannelScopeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel number on which the neighbor was found."
::= { hh3cDot11RRMNbrInfoEntry 2 }
hh3cDot11RRMNbrIntrf OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interference observed on the channel in percentage by neighbor."
::= { hh3cDot11RRMNbrInfoEntry 3 }
hh3cDot11RrmNbrRSSI OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signal strength of the AP in dBm."
::= { hh3cDot11RRMNbrInfoEntry 4 }
hh3cDot11RrmNbrType OBJECT-TYPE
SYNTAX INTEGER
{
managed(1),
unmanaged(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of the AP, managed or unmanaged."
::= { hh3cDot11RRMNbrInfoEntry 5 }
hh3cDot11RrmNbrSSID OBJECT-TYPE
SYNTAX Hh3cDot11SSIDStringType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID of the Neighbor."
::= { hh3cDot11RRMNbrInfoEntry 6 }
hh3cDot11RrmNbrSNR OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signal to noise ratio of the AP in dB."
::= { hh3cDot11RRMNbrInfoEntry 7 }
hh3cDot11RrmNbrNF OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Noise floor of the AP in dBm."
::= { hh3cDot11RRMNbrInfoEntry 8 }
hh3cDot11RRMHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11RRMHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows the details of the latest three channel changes
and power changes applied on all APs, including time of change,
reason of the change and the channel, power, interference parameters."
::= { hh3cDot11RRMDetectGroup 3 }
hh3cDot11RRMHistoryEntry OBJECT-TYPE
SYNTAX Hh3cDot11RRMHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry shows the details of channel and power changes."
INDEX { hh3cDot11RRMRadioIndex,
hh3cDot11RRMHistoryId,
hh3cDot11RRMHistoryRecIndctr }
::= { hh3cDot11RRMHistoryTable 1 }
Hh3cDot11RRMHistoryEntry ::=
SEQUENCE {
hh3cDot11RRMHistoryId
Integer32,
hh3cDot11RRMHistoryRecIndctr
INTEGER,
hh3cDot11RRMHistoryChl
Hh3cDot11ChannelScopeType,
hh3cDot11RRMHistoryPwr
Integer32,
hh3cDot11RRMHistoryLoad
Integer32,
hh3cDot11RRMHistoryUtlz
Integer32,
hh3cDot11RRMHistoryIntrf
Integer32,
hh3cDot11RRMHistoryNoise
Integer32,
hh3cDot11RRMHistoryPER
Integer32,
hh3cDot11RRMHistoryRetryRate
Integer32,
hh3cDot11RRMHistoryChgReason
BITS,
hh3cDot11RRMHistoryChgDateTime
DateAndTime
}
hh3cDot11RRMHistoryId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"History number of the change."
::= { hh3cDot11RRMHistoryEntry 1 }
hh3cDot11RRMHistoryRecIndctr OBJECT-TYPE
SYNTAX INTEGER
{
before(1),
after(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"History record type of the change."
::= { hh3cDot11RRMHistoryEntry 2 }
hh3cDot11RRMHistoryChl OBJECT-TYPE
SYNTAX Hh3cDot11ChannelScopeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel on which the radio operates before/after the change
of channel or power."
::= { hh3cDot11RRMHistoryEntry 3 }
hh3cDot11RRMHistoryPwr OBJECT-TYPE
SYNTAX Integer32
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Power of the radio before/after the change of channel or
power."
::= { hh3cDot11RRMHistoryEntry 4 }
hh3cDot11RRMHistoryLoad OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Load observed on the radio in percentage before/after the
change of channel or power."
::= { hh3cDot11RRMHistoryEntry 5 }
hh3cDot11RRMHistoryUtlz OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Utilization of the radio in percentage before/after the
change of channel or power."
::= { hh3cDot11RRMHistoryEntry 6 }
hh3cDot11RRMHistoryIntrf OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interference observed on the radio in percentage
before/after the change of channel or power."
::= { hh3cDot11RRMHistoryEntry 7 }
hh3cDot11RRMHistoryNoise OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Noise observed on the radio before/after the change
of channel or power."
::= { hh3cDot11RRMHistoryEntry 8 }
hh3cDot11RRMHistoryPER OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet error rate observed on the radio in percentage
before/after the change of channel or power."
::= { hh3cDot11RRMHistoryEntry 9 }
hh3cDot11RRMHistoryRetryRate OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage of retransmission happened on the radio
before/after the change of channel or power."
::= { hh3cDot11RRMHistoryEntry 10 }
hh3cDot11RRMHistoryChgReason OBJECT-TYPE
SYNTAX BITS
{
others(0),
coverage(1),
radar(2),
retransmission(3),
packetsDiscarded(4),
interference(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reason for the change of channel or power.
The various bit positions are:
|0 |Others |
|1 |Coverage |
|2 |Radar |
|3 |Retransmission |
|4 |Packets discarded |
|5 |Interference |
0 is returned when the history record type is after."
::= { hh3cDot11RRMHistoryEntry 11 }
hh3cDot11RRMHistoryChgDateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time when the channel or power change occurred."
::= { hh3cDot11RRMHistoryEntry 12 }
hh3cDot11RRMRadioNbrInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11RRMRadioNbrInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows the RRM neighbor information of each radio
on all APs."
::= { hh3cDot11RRMDetectGroup 4 }
hh3cDot11RRMRadioNbrInfoEntry OBJECT-TYPE
SYNTAX Hh3cDot11RRMRadioNbrInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information of RRM neighbor information
of the radio on an AP."
INDEX { hh3cDot11RRMRadioNbrAPID, hh3cDot11RRMRadioNbrRadioID }
::= { hh3cDot11RRMRadioNbrInfoTable 1 }
Hh3cDot11RRMRadioNbrInfoEntry ::=
SEQUENCE {
hh3cDot11RRMRadioNbrAPID
Hh3cDot11ObjectIDType,
hh3cDot11RRMRadioNbrRadioID
Hh3cDot11RadioScopeType,
hh3cDot11RRMRadioNbrSSID
OCTET STRING
}
hh3cDot11RRMRadioNbrAPID OBJECT-TYPE
SYNTAX Hh3cDot11ObjectIDType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"AP serial id."
::= { hh3cDot11RRMRadioNbrInfoEntry 1 }
hh3cDot11RRMRadioNbrRadioID OBJECT-TYPE
SYNTAX Hh3cDot11RadioScopeType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Radio Id on AP."
::= { hh3cDot11RRMRadioNbrInfoEntry 2 }
hh3cDot11RRMRadioNbrSSID OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"All neighbour SSIDs scanned by the selected radio."
::= { hh3cDot11RRMRadioNbrInfoEntry 3 }
hh3cDot11RRMNotifyGroup OBJECT IDENTIFIER ::= { hh3cDot11RRM 3 }
hh3cDot11RRMChlQltyNotifications OBJECT IDENTIFIER ::= { hh3cDot11RRMNotifyGroup 1 }
hh3cDot11RRMChlQltyNtfPrefix OBJECT IDENTIFIER ::= { hh3cDot11RRMChlQltyNotifications 0 }
hh3cDot11RRMIntrfLimit NOTIFICATION-TYPE
OBJECTS { hh3cDot11RRMChlRptIntrf }
STATUS current
DESCRIPTION
"This notification will be sent when interference on the radio
exceeds the limit."
::= { hh3cDot11RRMChlQltyNtfPrefix 1 }
hh3cDot11RRMPERLimit NOTIFICATION-TYPE
OBJECTS { hh3cDot11RRMChlRptPER }
STATUS current
DESCRIPTION
"This notification will be sent when packet error rate on the
radio exceeds the limit."
::= { hh3cDot11RRMChlQltyNtfPrefix 2 }
hh3cDot11RRMNoiseLimit NOTIFICATION-TYPE
OBJECTS { hh3cDot11RRMChlRptNoise }
STATUS current
DESCRIPTION
"This notification will be sent when noise on the radio exceeds
the limit."
::= { hh3cDot11RRMChlQltyNtfPrefix 3 }
hh3cDot11RRMResChgNotifications OBJECT IDENTIFIER ::= { hh3cDot11RRMNotifyGroup 2 }
hh3cDot11RRMResChgNtfPrefix OBJECT IDENTIFIER ::= { hh3cDot11RRMResChgNotifications 0 }
hh3cDot11RRMPowerChange NOTIFICATION-TYPE
OBJECTS { hh3cDot11RRMRadioIndex, hh3cDot11NewPower, hh3cDot11OldPower }
STATUS current
DESCRIPTION
"This notification will be sent when power changed on the radio
automatically."
::= { hh3cDot11RRMResChgNtfPrefix 1 }
hh3cDot11RRMNotificationsVar OBJECT IDENTIFIER ::= { hh3cDot11RRMNotifyGroup 3 }
hh3cDot11NewPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Power of the radio after the change of power."
::= { hh3cDot11RRMNotificationsVar 1 }
hh3cDot11OldPower OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Power of the radio before the change of power."
::= { hh3cDot11RRMNotificationsVar 2 }
hh3cDot11MonitorDetectedGroup OBJECT IDENTIFIER ::= { hh3cDot11RRM 4 }
hh3cDot11MonitorDetectedDevTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cDot11MonitorDetectedDevEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table shows the devices of AP detected"
::= { hh3cDot11MonitorDetectedGroup 1 }
hh3cDot11MonitorDetectedDevEntry OBJECT-TYPE
SYNTAX Hh3cDot11MonitorDetectedDevEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information of detected devices."
INDEX
{
hh3cDot11MonitorDevMAC, hh3cDot11APElementIndex
}
::= { hh3cDot11MonitorDetectedDevTable 1 }
Hh3cDot11MonitorDetectedDevEntry ::=
SEQUENCE {
hh3cDot11MonitorDevMAC
MacAddress,
hh3cDot11MonitorDevType
INTEGER,
hh3cDot11MonitorDevVendor
OCTET STRING,
hh3cDot11MonitorDevSSID
OCTET STRING,
hh3cDot11MonitorDevBSSID
MacAddress,
hh3cDot11MonitorDevChannel
Hh3cDot11ChannelScopeType,
hh3cDot11MonitorRadioId
Hh3cDot11RadioScopeType,
hh3cDot11MonitorDevMaxRSSI
Integer32,
hh3cDot11MonitorDevBeaconIntvl
Integer32,
hh3cDot11MonitorDevFstDctTime
DateAndTime,
hh3cDot11MonitorDevLstDctTime
DateAndTime,
hh3cDot11MonitorDevClear
TruthValue,
hh3cDot11MonitorDevSNR
Integer32
}
hh3cDot11MonitorDevMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents MAC address of the device detected."
::= { hh3cDot11MonitorDetectedDevEntry 1 }
hh3cDot11MonitorDevType OBJECT-TYPE
SYNTAX INTEGER
{
client(1),
ap(2),
adhoc(3),
wirelessBridge(4),
unknown(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents type of the device detected."
::= { hh3cDot11MonitorDetectedDevEntry 2 }
hh3cDot11MonitorDevVendor OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents vendor of the detected device."
::= { hh3cDot11MonitorDetectedDevEntry 3 }
hh3cDot11MonitorDevSSID OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the service set identifier for the ESS of the device which
type is ap or adhoc."
::= { hh3cDot11MonitorDetectedDevEntry 4 }
hh3cDot11MonitorDevBSSID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the basic service set identifier of the detected device."
::= { hh3cDot11MonitorDetectedDevEntry 5 }
hh3cDot11MonitorDevChannel OBJECT-TYPE
SYNTAX Hh3cDot11ChannelScopeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the channel in which the device was last detected. AP will
choose the channel which has maximum signal strength as effective
channel, as there is interference between adjacent channels."
::= { hh3cDot11MonitorDetectedDevEntry 6 }
hh3cDot11MonitorRadioId OBJECT-TYPE
SYNTAX Hh3cDot11RadioScopeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the radio ID of the AP that detected the device."
::= { hh3cDot11MonitorDetectedDevEntry 7 }
hh3cDot11MonitorDevMaxRSSI OBJECT-TYPE
SYNTAX Integer32
UNITS "dbm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the maximum detected RSSI of the device in a scan report cycle."
::= { hh3cDot11MonitorDetectedDevEntry 8 }
hh3cDot11MonitorDevBeaconIntvl OBJECT-TYPE
SYNTAX Integer32
UNITS "millisecond"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the beacon interval for the detected device(not include
the device which type is client)."
::= { hh3cDot11MonitorDetectedDevEntry 9 }
hh3cDot11MonitorDevFstDctTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the time at which the device was first detected."
::= { hh3cDot11MonitorDetectedDevEntry 10 }
hh3cDot11MonitorDevLstDctTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the time at which the device was detected last time."
::= { hh3cDot11MonitorDetectedDevEntry 11 }
hh3cDot11MonitorDevClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to clear the information of the device detected
in the WLAN.
It will return false for get operation."
::= { hh3cDot11MonitorDetectedDevEntry 12 }
hh3cDot11MonitorDevSNR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the SNR of the device in a scan report cycle."
::= { hh3cDot11MonitorDetectedDevEntry 13 }
END