mibs/MIBS/comware/HH3C-FCOE-MODE-MIB

91 lines
3.0 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- =====================================================================
-- Copyright (c) 2004-2015 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description:
-- This MIB module is for configuring and monitoring the working mode of
-- FCoE (Fibre Channel over Ethernet) features.
-- Reference:
-- Version: V1.1
-- History:
-- V1.0 Initial version
-- created by linlongjun 2013-03-08
-- V1.1 Added FCF-NPV mode of hh3cFcoeModeCfgMode by chengzhipeng 2014-02-07
-- =====================================================================
HH3C-FCOE-MODE-MIB DEFINITIONS ::= BEGIN
IMPORTS
Integer32, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
hh3cCommon
FROM HH3C-OID-MIB;
hh3cFcoeMode MODULE-IDENTITY
LAST-UPDATED "201303081100Z"
ORGANIZATION
"New H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085
"
DESCRIPTION
"This MIB module is for configuring and monitoring the working mode of
FCoE (Fibre Channel over Ethernet) features."
REVISION "201303081100Z"
DESCRIPTION
"Initial version of this MIB module."
::= { hh3cCommon 135 }
--
-- Node definitions
--
hh3cFcoeModeMibObjects OBJECT IDENTIFIER ::= { hh3cFcoeMode 1 }
hh3cFcoeModeCfgMode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the FCoE modes the switch supports.
The object has five available values:
1: non-FCoE mode.
2: FCF mode.
3: NPV mode.
4: Transit mode.
5: FCF-NPV mode.
The switch mode can only be converted from non-FCoE mode to one of FCoE
modes, or vice versa, but cannot be converted directly among the other
four FCoE modes.
To convert among the other four FCoE modes, the switch should first
be converted to non-FCoE mode. After converting the switch to non-FCoE
mode, FCoE-related configurations in the original FCoE mode will be
cleared."
::= { hh3cFcoeModeMibObjects 1 }
hh3cFcoeModeCfgLastResult OBJECT-TYPE
SYNTAX INTEGER {
success(1),
noLicence(2),
needReset(3),
unknownFault(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the result of the latest FCoE mode configuration.
The object has four values:
success - Configured successfully.
noLicence - Configured unsuccessfully for lack of license.
needReset - Configured unsuccessfully, because the desired mode is
not non-FCoE mode, and the mode should be first set to
non-FCoE mode.
unknownFault - Configured unsuccessfully for unknown fault."
::= { hh3cFcoeModeMibObjects 2 }
END