mibs/MIBS/comware/HH3C-USERLOG-MIB

806 lines
28 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- =================================================================
-- Copyright (C) 2003 New H3C Tech. Co., Ltd. All rights reserved.
--
-- Description:This MIB file is used for management of userlog
-- information.
-- Reference:
-- Version: V1.1
-- History:
-- V1.0
-- 31st Mar 2003
-- tianli, initial version
-- V1.1 2005-07-05
-- Modify value range of hh3cUserlogNatAclNumber and hh3cUserlogFlowAclNumber
-- by tanbo02122.
-- Update file format by gaolong.
-- =================================================================
HH3C-USERLOG-MIB DEFINITIONS ::= BEGIN
IMPORTS
hh3cRhw
FROM HH3C-OID-MIB
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
IpAddress, Integer32, Counter32, OBJECT-TYPE,
MODULE-IDENTITY
FROM SNMPv2-SMI;
hh3cUserLogMIB MODULE-IDENTITY
LAST-UPDATED "200304100000Z" -- April 10, 2003 at 00:00 GMT
ORGANIZATION
"New H3C Tech. Co., Ltd."
CONTACT-INFO
"Platform Team New H3C Tech. Co., Ltd.
Hai-Dian District Beijing P.R. China
http://www.h3c.com
Zip:100085
"
DESCRIPTION
"The HH3C-USERLOG-MIB contains objects to
Manage configuration and Monitor running state
for userlog feature."
::= { hh3cRhw 18 }
hh3cUserlogObjects OBJECT IDENTIFIER ::= { hh3cUserLogMIB 1 }
hh3cUserlogNatObjects OBJECT IDENTIFIER ::= { hh3cUserlogObjects 1 }
hh3cUserlogNatVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NAT LOG version. Currently only version 1 is developed."
::= { hh3cUserlogNatObjects 1 }
hh3cUserlogNatSyslog OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
NAT LOG format.
If 1, LOG format is sysLog.
If 0, LOG format is UDP packet.
UDP packet is the default format, and is recommended.
"
::= { hh3cUserlogNatObjects 2 }
hh3cUserlogNatSourceIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Source IP address of NAT LOG UDP packet."
::= { hh3cUserlogNatObjects 3 }
hh3cUserlogNatFlowBegin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Log the NAT flow when it is created.
If 1, this function is enabled.
If 0, this function is disabled.
This function will be used when real-time monitor required.
"
::= { hh3cUserlogNatObjects 4 }
hh3cUserlogNatActiveTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The active time for long-time existed NAT flow.
Unit: minute. Range: 10 minutes ~ 120 minutes.
When setting it, NAT flow can be logged after an interval of
active time.
This function will be used when real-time monitor required.
The default value 0 means real-time monitor function is disabled.
"
::= { hh3cUserlogNatObjects 5 }
hh3cUserlogNatSlotCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cUserlogNatSlotCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of NAT LOG configuration information for the
specified slot."
::= { hh3cUserlogNatObjects 6 }
hh3cUserlogNatSlotCfgInfoEntry OBJECT-TYPE
SYNTAX Hh3cUserlogNatSlotCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NAT LOG Configuration Information Entry for a slot."
INDEX { hh3cUserlogNatCfgSlotNumber }
::= { hh3cUserlogNatSlotCfgInfoTable 1 }
Hh3cUserlogNatSlotCfgInfoEntry ::=
SEQUENCE {
hh3cUserlogNatCfgSlotNumber
Integer32,
hh3cUserlogNatEnable
Integer32,
hh3cUserlogNatAclNumber
Integer32,
hh3cUserlogNatHostAddress
IpAddress,
hh3cUserlogNatUdpPort
Integer32
}
hh3cUserlogNatCfgSlotNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot number. Specify which slot is configured with NAT LOG. "
::= { hh3cUserlogNatSlotCfgInfoEntry 1 }
hh3cUserlogNatEnable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The NAT LOG feature Enable status.
If 1, NAT LOG is enbled.
If 0, NAT LOG is disabled.
"
::= { hh3cUserlogNatSlotCfgInfoEntry 2 }
hh3cUserlogNatAclNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Access-list number.
The value 0 means no ACL is specified.
Only when NAT LOG is enabled, can ACL be configured.
Only NAT flow which match the ACL will be logged.
"
::= { hh3cUserlogNatSlotCfgInfoEntry 3 }
hh3cUserlogNatHostAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of NAT LOG server. "
::= { hh3cUserlogNatSlotCfgInfoEntry 4 }
hh3cUserlogNatUdpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP Port Number of NAT LOG UDP packet."
::= { hh3cUserlogNatSlotCfgInfoEntry 5 }
hh3cUserlogNatSlotRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cUserlogNatSlotRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of NAT LOG running information for the specified slot."
::= { hh3cUserlogNatObjects 7 }
hh3cUserlogNatSlotRunInfoEntry OBJECT-TYPE
SYNTAX Hh3cUserlogNatSlotRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"NAT LOG Running Information Entry for a slot."
INDEX { hh3cUserlogNatRunSlotNumber }
::= { hh3cUserlogNatSlotRunInfoTable 1 }
Hh3cUserlogNatSlotRunInfoEntry ::=
SEQUENCE {
hh3cUserlogNatRunSlotNumber
Integer32,
hh3cUserlogNatTotalEntries
Counter32,
hh3cUserlogNatTotalPackets
Counter32,
hh3cUserlogNatFailedEntries
Counter32,
hh3cUserlogNatFailedPackets
Counter32,
hh3cUserlogNatClearRunStat
Integer32
}
hh3cUserlogNatRunSlotNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot number. Specify on which slot the NAT LOG statistics
displayed."
::= { hh3cUserlogNatSlotRunInfoEntry 1 }
hh3cUserlogNatTotalEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NAT flow entries which are logged."
::= { hh3cUserlogNatSlotRunInfoEntry 2 }
hh3cUserlogNatTotalPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NAT LOG UDP packets generated by the router."
::= { hh3cUserlogNatSlotRunInfoEntry 3 }
hh3cUserlogNatFailedEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NAT flow entries failed in outputting."
::= { hh3cUserlogNatSlotRunInfoEntry 4 }
hh3cUserlogNatFailedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NAT LOG UDP packets failed in outputting."
::= { hh3cUserlogNatSlotRunInfoEntry 5 }
hh3cUserlogNatClearRunStat OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Clear the running statistics for NAT LOG. Write-only.
If 1, the running statistics for NAT LOG is resetted.
Other value is invalid.
"
::= { hh3cUserlogNatSlotRunInfoEntry 6 }
hh3cUserlogFlowObjects OBJECT IDENTIFIER ::= { hh3cUserlogObjects 2 }
hh3cUserlogFlowVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BAS FLOW LOG version. Currently only version 1 is developed."
::= { hh3cUserlogFlowObjects 1 }
hh3cUserlogFlowSyslog OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
BAS FLOW LOG format.
If 1, LOG format is sysLog.
If 0, LOG format is UDP packet.
UDP packet is the default format, and is recommended.
"
::= { hh3cUserlogFlowObjects 2 }
hh3cUserlogFlowSourceIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Source IP address of BAS FLOW LOG UDP packet."
::= { hh3cUserlogFlowObjects 3 }
hh3cUserlogFlowFlowBegin OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Log the BAS flow when it is created.
If 1, this function is enabled.
If 0, this function is disabled.
This function will be used when real-time monitor required.
"
::= { hh3cUserlogFlowObjects 4 }
hh3cUserlogFlowActiveTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The active time for long-time existed BAS flow.
Unit: minute. Range: 10 minutes ~ 120 minutes.
When setting it, BAS flow can be logged after an internal of
active time.
This function will be used when real-time monitor required.
The default value 0 means real-time monitor function is disabled.
"
::= { hh3cUserlogFlowObjects 5 }
hh3cUserlogFlowSlotCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cUserlogFlowSlotCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of BAS FLOW LOG configuration information for the
specified slot."
::= { hh3cUserlogFlowObjects 6 }
hh3cUserlogFlowSlotCfgInfoEntry OBJECT-TYPE
SYNTAX Hh3cUserlogFlowSlotCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BAS FLOW LOG Configuration Information Entry for a slot."
INDEX { hh3cUserlogFlowCfgSlotNumber }
::= { hh3cUserlogFlowSlotCfgInfoTable 1 }
Hh3cUserlogFlowSlotCfgInfoEntry ::=
SEQUENCE {
hh3cUserlogFlowCfgSlotNumber
Integer32,
hh3cUserlogFlowEnable
Integer32,
hh3cUserlogFlowAclNumber
Integer32,
hh3cUserlogFlowHostAddress
IpAddress,
hh3cUserlogFlowUdpPort
Integer32
}
hh3cUserlogFlowCfgSlotNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot number. Specify which slot is configured with BAS FLOW LOG."
::= { hh3cUserlogFlowSlotCfgInfoEntry 1 }
hh3cUserlogFlowEnable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The BAS FLOW LOG feature Enable status.
If 1, BAS FLOW LOG is enbled.
If 0, BAS FLOW LOG is disabled.
"
::= { hh3cUserlogFlowSlotCfgInfoEntry 2 }
hh3cUserlogFlowAclNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Access-list number.
The value 0 means no ACL is specified.
Only when BAS FLOW LOG is enabled, can ACL be configured.
Only BAS flow which match the ACL will be logged.
"
::= { hh3cUserlogFlowSlotCfgInfoEntry 3 }
hh3cUserlogFlowHostAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of BAS FLOW LOG server. "
::= { hh3cUserlogFlowSlotCfgInfoEntry 4 }
hh3cUserlogFlowUdpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP Port Number of BAS FLOW LOG UDP packet."
::= { hh3cUserlogFlowSlotCfgInfoEntry 5 }
hh3cUserlogFlowSlotRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cUserlogFlowSlotRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of BAS FLOW LOG running information for the specified slot."
::= { hh3cUserlogFlowObjects 7 }
hh3cUserlogFlowSlotRunInfoEntry OBJECT-TYPE
SYNTAX Hh3cUserlogFlowSlotRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Running Information Entry for a slot."
INDEX { hh3cUserlogFlowRunSlotNumber }
::= { hh3cUserlogFlowSlotRunInfoTable 1 }
Hh3cUserlogFlowSlotRunInfoEntry ::=
SEQUENCE {
hh3cUserlogFlowRunSlotNumber
Integer32,
hh3cUserlogFlowTotalEntries
Counter32,
hh3cUserlogFlowTotalPackets
Counter32,
hh3cUserlogFlowFailedEntries
Counter32,
hh3cUserlogFlowFailedPackets
Counter32,
hh3cUserlogFlowClearRunStat
Integer32
}
hh3cUserlogFlowRunSlotNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot number. Specify on which slot the BAS FLOW LOG
statistics displayed."
::= { hh3cUserlogFlowSlotRunInfoEntry 1 }
hh3cUserlogFlowTotalEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BAS FLOW Entries which are logged."
::= { hh3cUserlogFlowSlotRunInfoEntry 2 }
hh3cUserlogFlowTotalPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of FLOW LOG UDP packet generated by the router."
::= { hh3cUserlogFlowSlotRunInfoEntry 3 }
hh3cUserlogFlowFailedEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BAS FLOW entries failed in outputting. "
::= { hh3cUserlogFlowSlotRunInfoEntry 4 }
hh3cUserlogFlowFailedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BAS FLOW LOG UDP packet failed in outputting."
::= { hh3cUserlogFlowSlotRunInfoEntry 5 }
hh3cUserlogFlowClearRunStat OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Clear the running statistics for FLOW LOG. Write-only.
If 1, the running statistics for FLOW LOG is resetted.
Other value is invalid.
"
::= { hh3cUserlogFlowSlotRunInfoEntry 6 }
hh3cUserlogAccessObjects OBJECT IDENTIFIER ::= { hh3cUserlogObjects 3 }
hh3cUserlogAccessVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"BAS ACCESS LOG version. Currently only version 1 is developed."
::= { hh3cUserlogAccessObjects 1 }
hh3cUserlogAccessSyslog OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
BAS ACCESS LOG format.
If 1, LOG format is sysLog;
If 0, LOG format is UDP packet.
UDP packet is the default format, and is recommended.
"
::= { hh3cUserlogAccessObjects 2 }
hh3cUserlogAccessSourceIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Source IP address of BAS ACCESS LOG UDP packet."
::= { hh3cUserlogAccessObjects 3 }
hh3cUserlogAccessSlotCfgInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cUserlogAccessSlotCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of BAS ACCESS LOG configuration information for the specified slot."
::= { hh3cUserlogAccessObjects 4 }
hh3cUserlogAccessSlotCfgInfoEntry OBJECT-TYPE
SYNTAX Hh3cUserlogAccessSlotCfgInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"BAS ACCESS LOG Configuration Information Entry for a slot."
INDEX { hh3cUserlogAccessCfgSlotNumber }
::= { hh3cUserlogAccessSlotCfgInfoTable 1 }
Hh3cUserlogAccessSlotCfgInfoEntry ::=
SEQUENCE {
hh3cUserlogAccessCfgSlotNumber
Integer32,
hh3cUserlogAccessEnable
Integer32,
hh3cUserlogAccessHostAddress
IpAddress,
hh3cUserlogAccessUdpPort
Integer32
}
hh3cUserlogAccessCfgSlotNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot number. Specify which slot is configured with BAS ACCESS LOG."
::= { hh3cUserlogAccessSlotCfgInfoEntry 1 }
hh3cUserlogAccessEnable OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The BAS ACCESS LOG feature Enable status.
If 1, BAS ACCESS LOG is enbled.
If 0, BAS ACCESS LOG is disabled.
"
::= { hh3cUserlogAccessSlotCfgInfoEntry 2 }
hh3cUserlogAccessHostAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of BAS ACCESS LOG server."
::= { hh3cUserlogAccessSlotCfgInfoEntry 3 }
hh3cUserlogAccessUdpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP Port Number of BAS ACCESS LOG UDP packet."
::= { hh3cUserlogAccessSlotCfgInfoEntry 4 }
hh3cUserlogAccessSlotRunInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hh3cUserlogAccessSlotRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of BAS ACCESS LOG running information for the specified slot."
::= { hh3cUserlogAccessObjects 5 }
hh3cUserlogAccessSlotRunInfoEntry OBJECT-TYPE
SYNTAX Hh3cUserlogAccessSlotRunInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Running Information Entry for a slot."
INDEX { hh3cUserlogAccessRunSlotNumber }
::= { hh3cUserlogAccessSlotRunInfoTable 1 }
Hh3cUserlogAccessSlotRunInfoEntry ::=
SEQUENCE {
hh3cUserlogAccessRunSlotNumber
Integer32,
hh3cUserlogAccessTotalEntries
Counter32,
hh3cUserlogAccessTotalPackets
Counter32,
hh3cUserlogAccessFailedEntries
Counter32,
hh3cUserlogAccessFailedPackets
Counter32,
hh3cUserlogAccessClearRunStat
Integer32
}
hh3cUserlogAccessRunSlotNumber OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Slot number. Specify on which slot the BAS ACCESS LOG statistics displayed."
::= { hh3cUserlogAccessSlotRunInfoEntry 1 }
hh3cUserlogAccessTotalEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BAS ACCESS Records which are logged."
::= { hh3cUserlogAccessSlotRunInfoEntry 2 }
hh3cUserlogAccessTotalPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of ACCESS LOG UDP packet generated by the router."
::= { hh3cUserlogAccessSlotRunInfoEntry 3 }
hh3cUserlogAccessFailedEntries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BAS ACCESS entries failed in outputting."
::= { hh3cUserlogAccessSlotRunInfoEntry 4 }
hh3cUserlogAccessFailedPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of BAS ACCESS LOG UDP packet failed in outputting."
::= { hh3cUserlogAccessSlotRunInfoEntry 5 }
hh3cUserlogAccessClearRunStat OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
Clear the running statistics for ACCESS LOG. Write-only.
If 1, the running statistics for ACCESS LOG is resetted.
Other value is invalid.
"
::= { hh3cUserlogAccessSlotRunInfoEntry 6 }
hh3cUserlogNotifications OBJECT IDENTIFIER ::= { hh3cUserLogMIB 2 }
hh3cUserlogConformance OBJECT IDENTIFIER ::= { hh3cUserLogMIB 3 }
hh3cUserlogCompliances OBJECT IDENTIFIER ::= { hh3cUserlogConformance 1 }
hh3cUserlogCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
Userlog mib."
MODULE -- this module
MANDATORY-GROUPS { hh3cUserlogMandatoryGroup }
::= { hh3cUserlogCompliances 1 }
hh3cUserlogGroups OBJECT IDENTIFIER ::= { hh3cUserlogConformance 2 }
hh3cUserlogMandatoryGroup OBJECT-GROUP
OBJECTS { hh3cUserlogNatEnable, hh3cUserlogNatHostAddress, hh3cUserlogNatUdpPort,
hh3cUserlogFlowEnable, hh3cUserlogFlowHostAddress, hh3cUserlogFlowUdpPort,
hh3cUserlogAccessEnable, hh3cUserlogAccessHostAddress, hh3cUserlogAccessUdpPort
}
STATUS current
DESCRIPTION
"A collection of objects providing mandatory Userlog information."
::= { hh3cUserlogGroups 1 }
hh3cUserlogConfigGroup OBJECT-GROUP
OBJECTS { hh3cUserlogNatVersion, hh3cUserlogNatSyslog, hh3cUserlogNatSourceIP,
hh3cUserlogNatFlowBegin, hh3cUserlogNatActiveTime, hh3cUserlogNatCfgSlotNumber,
hh3cUserlogNatEnable, hh3cUserlogNatAclNumber, hh3cUserlogNatHostAddress,
hh3cUserlogNatUdpPort, hh3cUserlogFlowVersion, hh3cUserlogFlowSyslog,
hh3cUserlogFlowSourceIP, hh3cUserlogFlowFlowBegin, hh3cUserlogFlowActiveTime,
hh3cUserlogFlowCfgSlotNumber, hh3cUserlogFlowEnable, hh3cUserlogFlowAclNumber,
hh3cUserlogFlowHostAddress, hh3cUserlogFlowUdpPort, hh3cUserlogAccessVersion,
hh3cUserlogAccessSyslog, hh3cUserlogAccessSourceIP, hh3cUserlogAccessCfgSlotNumber,
hh3cUserlogAccessEnable, hh3cUserlogAccessHostAddress, hh3cUserlogAccessUdpPort
}
STATUS current
DESCRIPTION
"All configurable parameters of Userlog feature."
::= { hh3cUserlogGroups 2 }
hh3cUserlogInfoGroup OBJECT-GROUP
OBJECTS { hh3cUserlogNatTotalEntries, hh3cUserlogNatTotalPackets,
hh3cUserlogNatFailedEntries, hh3cUserlogNatFailedPackets,
hh3cUserlogFlowTotalEntries, hh3cUserlogFlowTotalPackets,
hh3cUserlogFlowFailedEntries, hh3cUserlogFlowFailedPackets,
hh3cUserlogAccessTotalEntries, hh3cUserlogAccessTotalPackets,
hh3cUserlogAccessFailedEntries, hh3cUserlogAccessFailedPackets
}
STATUS current
DESCRIPTION
"All running information of Userlog feature."
::= { hh3cUserlogGroups 3 }
END