mibs/MIBS/dlink/DLINKSW-LED-MIB

260 lines
10 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- DLINKSW-LED-MIB.mib : LED Mib
--
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKSW-LED-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
dlinkIndustrialCommon
FROM DLINK-ID-REC-MIB;
dlinkSwLedMIB MODULE-IDENTITY
LAST-UPDATED "201309130000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
" D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"A MIB module for LED status.
"
REVISION "201309130000Z"
DESCRIPTION
"Add 'LED off' state for stackingID(12) LED."
REVISION "201309060000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { dlinkIndustrialCommon 163 }
-- -----------------------------------------------------------------------------
dLedMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwLedMIB 0 }
dLedMIBObjects OBJECT IDENTIFIER ::= { dlinkSwLedMIB 1 }
dLedMIBConformance OBJECT IDENTIFIER ::= { dlinkSwLedMIB 2 }
--------------------------------------------------------------------------------
dLedInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF DLedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table consists of a list of information of LEDs."
::= { dLedMIBObjects 1 }
dLedInfoEntry OBJECT-TYPE
SYNTAX DLedInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains information of one box."
INDEX {dLedBoxId}
::= { dLedInfoTable 1 }
DLedInfoEntry ::=
SEQUENCE {
dLedBoxId
INTEGER,
dLedSysLedStatus
OCTET STRING,
dLedIfLedStatus
OCTET STRING
}
dLedBoxId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This variable uniquely identifies the box in the stack, module in a
rack and the value 1 MUST be used for non-modular devices."
::= { dLedInfoEntry 1 }
dLedSysLedStatus OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a set of system LED indicators.
Every type LED's format is as follow:
+-------------------------------------+
| LED | LED | Data |...| Data |
| Type | Length | | | |
+-------------------------------------+
1octet 1octet 3octet
LED Type(1 octet):
rps(1) - indicates RPS LED,
console(2) - indicates console LED,
master(3) - indicates device role LED,
sdCard(4) - indicates SD card LED,
linkMode(5) - indicates link mode LED,
poeMode(6) - indicates PoE mode LED,
alarm(7) - indicates alarm LED,
sysPower(8) - indicates system power LED,
mgmtPort(9) - indicates management port LED,
fan(10) - indicates device's fan LED,
sioPort(11) - indicates SIO port LED,
stackingID(12) - indicates stacking ID LED
LED Length(1 octet): indicates Data's length of a specified LED type in number of octets.
Data(3 octets): indicates LED status of specified LED type. Three consecutive octets are used
to represent the information of one LED. If given LED type has more than one LEDs,
there are multiple such triads in the data field.
If LED Type is stackingID(12), below predefined values represent stacking ID LED's
status, with the most significant byte in the first octet.
index box id LED display
0x0 -- '0'
0x1 -- '1'
0x2 -- '2'
0x3 -- '3'
0x4 -- '4'
0x5 -- '5'
0x6 -- '6'
0x7 -- '7'
0x8 -- '8'
0x9 -- '9'
0xA -- '10'
0xB -- '11'
0xC -- '12'
0xD -- '13'
0xE -- '14'
0xF -- '15'
0x10 -- '16'
0x11 -- '17'
0x12 -- '18'
0x13 -- '19'
0x100 -- 'H'
0x101 -- 'h'
0x102 -- 'E'
0x103 -- 'G'
0xfff -- LED off state
Else these 3 octets shows LED's status value,format is as below:
+-------------------------+
| LED Instance | LED |
| Index | Status |
+-------------------------+
1 octet 2 octet
LED instance index(high octet) indicates the instance ID of specified LED type.
For example, if the LED type is fan(10), it is the fan ID.
LED status(low 2 octets) is the status of one LED. Its data format is as below:
+-----------------------+
| Color | LED Lighting |
| Bits | Mode |
+-----------------------+
15 4 3 0
Bit0 to bit3 indicates the mode of LED lighting.
0x0 means this LED is not supported.
0x1 means LED is off.
0x2 means LED is fixed lighting.
0x3 indicates LED is blinking.
0x4 indicates LED is alternating lighting between more than one color.
Colors are determined by color bits.
0x5-0xF are reserved.
Bit4 to bit15 are color bits, they indicate the LED's specific color. If a
color bit is set, it stands for corresponding color. Only when LED lighting mode
is alternating lighting(low nibble is 0x4), multi-bit can be set.
bit4 - green bit
bit5 - amber bit
bit6 - red bit
bit7-bit15 are reserved.
If a LED instance consists of more LEDs, for example, if power source has separate input, state
LEDs, there will be two LED data and their instance index is the same power ID. One LED data for the input LED,
another for the state LED. The meaning of each LED data is device based.
+---------------------------------------------------------------------------------------------+
| sysPower(8) | 12 | power1 | LED | power1 | LED | power2 | LED | power2 | LED |...
| | | | Status | | Status | | Status | | Status |
+---------------------------------------------------------------------------------------------+
"
::= { dLedInfoEntry 2 }
dLedIfLedStatus OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is a set of ethernet port LED indicators. Format is as follow:
+--------------------------------------------+
| Total Port | Port1 |....| PortN |
| Number | LED Status | | LED Status |
+--------------------------------------------+
1octets 2octets
Total Port Number(1 octet): indicates the number of following port LED status.
Port LED Status(2 octets): indicates one ethernet port LED's status, format is as below:
+-----------------------+
| Color | LED lighting |
| bits | mode |
+-----------------------+
15 4 3 0
Bit0 to bit3 indicates the mode of LED lighting.
0x0 means this LED is not supported.
0x1 means LED is off.
0x2 means LED is fixed lighting.
0x3 indicates LED is blinking.
0x4 indicates LED is alternating lighting between more than one color.
Colors are determined by color bits.
0x5-0xF are reserved.
Bit4 to bit15 are color bits,they indicate the LED's specific color. If a
color bit is set, it stands for corresponding color. Only when LED lighting mode
is alternating lighting(low nibble is 0x4), multi-bit can be set.
bit4 - green bit
bit5 - amber bit
bit6 - red bit
bit7-bit15 are reserved.
Each LED Status corresponds to one port, all ethernet port LEDs' status are arranged
from lowest number port to high.
"
::= { dLedInfoEntry 3 }
-- *****************************************************************************
-- MIB Conformance statements
-- *****************************************************************************
dLedMIBCompliances OBJECT IDENTIFIER ::= { dLedMIBConformance 1 }
dLedMIBGroups OBJECT IDENTIFIER ::= { dLedMIBConformance 2 }
dLedMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
DLINKSW-LED-MIB."
MODULE -- this module
MANDATORY-GROUPS {
dLedInfoGroup
}
::= { dLedMIBCompliances 1 }
dLedInfoGroup OBJECT-GROUP
OBJECTS {
dLedSysLedStatus,
dLedIfLedStatus
}
STATUS current
DESCRIPTION
"A collection of objects to display the LED status."
::= { dLedMIBGroups 1 }
END