mibs/MIBS/dlink/DLINKSW-SWITCHPORT-MIB

--  *****************************************************************
--  DLINKSW-SWITCHPORT-MIB.mib : Switch Port MIB
--
--  Copyright (c) 2012 D-Link Corporation, all rights reserved.
--
--  *****************************************************************
DLINKSW-SWITCHPORT-MIB DEFINITIONS ::= BEGIN

    IMPORTS
        MODULE-IDENTITY,
        OBJECT-TYPE,
        Unsigned32
                FROM SNMPv2-SMI
        TruthValue
                FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP 
                FROM SNMPv2-CONF
        ifIndex
                FROM IF-MIB
        dlinkIndustrialCommon
                FROM DLINK-ID-REC-MIB;
                
    dlinkSwSwitchPortMIB MODULE-IDENTITY    
        LAST-UPDATED "201303040000Z"
        ORGANIZATION "D-Link Corp."
        CONTACT-INFO
            "        D-Link Corporation

             Postal: No. 289, Sinhu 3rd Rd., Neihu District,
                     Taipei City 114, Taiwan, R.O.C
             Tel:     +886-2-66000123
             E-mail: tsd@dlink.com.tw
            "
        DESCRIPTION
            "This MIB module defines objects for per-port configuration which 
            are not covered by standard MIB(s)."
	
        REVISION "201303040000Z"
        DESCRIPTION
            " This is the first version of the MIB file
            "
        ::= { dlinkIndustrialCommon 11 }

-- -----------------------------------------------------------------------------
    dSwPortNotifications    OBJECT IDENTIFIER ::= { dlinkSwSwitchPortMIB 0 }
    dSwPortObjects          OBJECT IDENTIFIER ::= { dlinkSwSwitchPortMIB 1 }
    dSwPortConformance      OBJECT IDENTIFIER ::= { dlinkSwSwitchPortMIB 2 }


-- -----------------------------------------------------------------------------
-- Objects
-- -----------------------------------------------------------------------------         
     dSwPortIfTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF DSwPortIfEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
            "A list of physical port interface entries."
        ::= { dSwPortObjects 1 }
        
    dSwPortIfEntry OBJECT-TYPE
	    SYNTAX          DSwPortIfEntry
	    MAX-ACCESS      not-accessible
	    STATUS          current
	    DESCRIPTION 
	        "An entry in dSwPortIfTable contains port-specific configuration
		    which cannot be covered by standard MIBs (EtherLike or MAU-MIB)."
	    INDEX       { ifIndex }
	    ::= { dSwPortIfTable 1 } 
	    
    DSwPortIfEntry ::= SEQUENCE {            
        dSwPortIfB1000baseTCtrl     INTEGER,        
        dSwPortIfB10GbaseTCtrl      INTEGER,         
        dSwPortIfMdix               INTEGER,
        dSwPortIfJumboFrameSize     Unsigned32,
        dSwPortIfSpeedAutoDowngrade TruthValue
    }
   
    dSwPortIfB1000baseTCtrl OBJECT-TYPE
        SYNTAX          INTEGER { 
            other(1),           
            b1000baseTMaster(2),
            b1000baseTSlave(3)                          
        }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION      
            "This object can be modified when port speed is configured to 1000BASE-T. 
            other(1) - the port is not 1000BASE-T or master/slave timing mode
                       is not specified.
            b1000baseTMaster(2) - configure the port operate as master timing.
            b1000baseTSlave(3) - configure the port operate as slave timing.                    
            "     
        DEFVAL      { b1000baseTMaster }      
        ::= { dSwPortIfEntry 1 }

    dSwPortIfB10GbaseTCtrl OBJECT-TYPE
        SYNTAX          INTEGER { 
            other(1),           
            b10GbaseTMaster(2),
            b10GbaseTSlave(3)                          
        }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION      
            "This object can be modified when port speed is configured to 10GBASE-T. 
            other(1) - the port is not 10GBASE-T or master/slave timing mode
                       is not specified.
            b10GbaseTMaster(2) - configure the port operate as master timing.
            b10GbaseTSlave(3) - configure the port operate as slave timing.                    
            "     
        DEFVAL      { b10GbaseTMaster }      
        ::= { dSwPortIfEntry 2 }
                
    dSwPortIfMdix OBJECT-TYPE
        SYNTAX      INTEGER { 
            auto(1), 
            normal(2), 
            cross(3) 
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION   
            "Uses the object to configure the state of Media-Dependent Interface
            Crossover (MDIX) of the port."
        DEFVAL      { auto }
        ::= { dSwPortIfEntry 3 }
	
    dSwPortIfJumboFrameSize OBJECT-TYPE
	    SYNTAX		    Unsigned32
	    MAX-ACCESS	    read-write
	    STATUS		    current
	    DESCRIPTION
			"The size of the largest packet which can be received on the
			interface, specified in octets."
		DEFVAL      { 1536 }	
	    ::= { dSwPortIfEntry 4 }

    dSwPortIfSpeedAutoDowngrade OBJECT-TYPE
	    SYNTAX		TruthValue
	    MAX-ACCESS	    	read-write
	    STATUS		current
	    DESCRIPTION
			"This object indicates whether automatically downgrade the advertised
            speed in case a link cannot be established at the available speed. 
			"
		DEFVAL      { false }	
	    ::= { dSwPortIfEntry 5 }	    
   
-- -----------------------------------------------------------------------------
-- Conformance
-- -----------------------------------------------------------------------------
    dSwPortCompliances OBJECT IDENTIFIER ::= { dSwPortConformance 1 }
		
	dSwPortCompliance MODULE-COMPLIANCE
		STATUS          current
		DESCRIPTION 
			"The compliance statement for entities which implement the 
			DLINKSW-SWITCHPORT-MIB."
		MODULE -- this module
		MANDATORY-GROUPS { 
		    dSwPortBasicGroup
		}		
	                        
        OBJECT          dSwPortIfSpeedAutoDowngrade        
        MIN-ACCESS      read-only
        DESCRIPTION
            "It is compliant to implement this object as
            read-only. The write-access is only required
            when auto-downgrade feature is supported."
	    ::= { dSwPortCompliances 1 }
		
	dSwPortGroups OBJECT IDENTIFIER ::= { dSwPortConformance 2 }
		
    dSwPortBasicGroup OBJECT-GROUP
		OBJECTS { 
		    dSwPortIfB1000baseTCtrl,
		    dSwPortIfB10GbaseTCtrl,
		    dSwPortIfMdix,
		    dSwPortIfJumboFrameSize,
		    dSwPortIfSpeedAutoDowngrade
		}
		STATUS current
		DESCRIPTION 
			"This group contains the collection of fundamental port configuration
			objects which are not covered by standard MIBs."						
		::= { dSwPortGroups 1 }
	

	
END