mibs/MIBS/dlink/DLINKSW-SYSTEM-FILE-MIB

772 lines
28 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- DLINKSW-SYSTEM-FILE-MIB: D-Link System File MIB
--
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKSW-SYSTEM-FILE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION, TruthValue, RowStatus, DisplayString
FROM SNMPv2-TC
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB
InterfaceIndexOrZero
FROM IF-MIB
dlinkIndustrialCommon
FROM DLINK-ID-REC-MIB;
dlinkSwSystemFileMIB MODULE-IDENTITY
LAST-UPDATED "201308190000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
" D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"This MIB module defines objects for managing system critical files
(e.g configuration and firmware.)
"
REVISION "201308190000Z"
DESCRIPTION
"Add traps about uploading or downloading image file (dsfUploadImage,
dsfDownloadImage) and uploading, downloading or saving configuration file
(dsfUploadCfg, dsfDownloadCfg, dsfSaveCfg)."
REVISION "201304240000Z"
DESCRIPTION
"This is the first version of the MIB file."
::= { dlinkIndustrialCommon 14 }
--
-- Node definitions
--
dsfMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwSystemFileMIB 0 }
dsfMIBObjects OBJECT IDENTIFIER ::= { dlinkSwSystemFileMIB 1 }
dsfMIBConformance OBJECT IDENTIFIER ::= { dlinkSwSystemFileMIB 2 }
-- -----------------------------------------------------------------------------
dsfBootInfoObjects OBJECT IDENTIFIER ::= { dsfMIBObjects 1 }
dsfNextBootCfgUrl OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..799))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the URL of the file to be used as the startup
configuration file."
::= { dsfBootInfoObjects 1 }
dsfNextBootImageUrl OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..799))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the URL of the file to be used as boot image
file."
::= { dsfBootInfoObjects 2 }
dsfCheckingBootImageCheck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether displays the information of the
specified next boot image to let user understand whether the
specified file is suitable to be a boot image or not, which some
information should be displayed such as purpose of the file,
version number, time stamp, and checksum etc.
The object dsfBootCheckResult indicates the checking result.
"
::= { dsfBootInfoObjects 3 }
dsfBootImageCheckResult OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the information of the specified next boot
image such as the purpose of the file, version number, time stamp,
and checksum etc.
This object is meaningful when dsfNextBootImageUrl is not empty
and dsfBootCheckImage is 'true'.
"
::= { dsfBootInfoObjects 4 }
-- -----------------------------------------------------------------------------
dsfBootImageTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsfBootImageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is used to display information for boot images of units."
::= { dsfBootInfoObjects 5 }
dsfBootImageEntry OBJECT-TYPE
SYNTAX DsfBootImageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains version information of a unit."
INDEX {
dsfBootImageUnitId,
dsfBootImageIndex
}
::= { dsfBootImageTable 1 }
DsfBootImageEntry ::= SEQUENCE {
dsfBootImageUnitId Unsigned32,
dsfBootImageIndex Unsigned32,
dsfBootImageUrl OCTET STRING,
dsfBootImageInWorking TruthValue
}
dsfBootImageUnitId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the unit (stacking device) or slot (chassis
device) ID.
"
::= { dsfBootImageEntry 1 }
dsfBootImageIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the index of boot image."
::= { dsfBootImageEntry 2 }
dsfBootImageUrl OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..799))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the file name and path of the entry."
::= { dsfBootImageEntry 3 }
dsfBootImageInWorking OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether the entry is the current boot image."
::= { dsfBootImageEntry 4 }
-- -----------------------------------------------------------------------------
dsfBootCfgFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsfBootCfgFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table is used to display boot configuration file of units."
::= { dsfBootInfoObjects 6 }
dsfBootCfgFileEntry OBJECT-TYPE
SYNTAX DsfBootCfgFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the information for boot configuration file of a unit."
INDEX {
dsfBootCfgFileUnitId
}
::= { dsfBootCfgFileTable 1 }
DsfBootCfgFileEntry ::= SEQUENCE {
dsfBootCfgFileUnitId Unsigned32,
dsfBootCfgFileUrl OCTET STRING
}
dsfBootCfgFileUnitId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the unit (stacking device) or slot (chassis
device) ID.
"
::= { dsfBootCfgFileEntry 1 }
dsfBootCfgFileUrl OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..799))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the file name and path of the entry."
::= { dsfBootCfgFileEntry 2 }
-- -----------------------------------------------------------------------------
dsfCopyTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsfCopyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains the information for file copy. There will at any
time be either 0 or 1 row in this table, and the only valid index
for this table is 1. It is only a table so that we may take
advantage of the RowStatus textual convention for configuring
the copying parameters."
::= { dsfMIBObjects 2 }
dsfCopyEntry OBJECT-TYPE
SYNTAX DsfCopyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains parameters for copy."
INDEX { dsfCopyIndex }
::= { dsfCopyTable 1 }
DsfCopyEntry ::= SEQUENCE {
dsfCopyIndex Unsigned32,
dsfCopyType INTEGER,
dsfCopySrcUrl OCTET STRING,
dsfCopyDstUrl OCTET STRING,
dsfCopyRemoteAddrType InetAddressType,
dsfCopyRemoteAddr InetAddress,
dsfCopyUsrName DisplayString,
dsfCopyUsrPwd DisplayString,
dsfCopyRemoteTcpPort Unsigned32,
dsfCopyVrfName DisplayString,
dsfCopyErrorStatus DisplayString,
dsfCopyRowStatus RowStatus
}
dsfCopyIndex OBJECT-TYPE
SYNTAX Unsigned32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies this row.
The only legal value for this object is 1."
::= { dsfCopyEntry 1 }
dsfCopyType OBJECT-TYPE
SYNTAX INTEGER {
localToLocal(1),
localToTftpRemote(2),
localToFtpRemote(3),
localToRcpRemote(4),
tftpRemoteToLocal(5),
ftpRemoteToLocal(6),
rcpRemoteToLocal(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of the copy.
'localToLocal' - Copy file within the system.
'localToTftpRemote' - Upload file remote host via TFTP.
'localToFtpRemote' - Upload file remote host via FTP.
'localToRcpRemote' - Upload file remote host via RCP.
'tftpRemoteToLocal' - Download file from remote host via TFTP.
'ftpRemoteToLocal' - Download file from remote host via FTP.
'rcpRemoteToLocal' - Download file from remote host via RCP.
"
::= { dsfCopyEntry 2 }
dsfCopySrcUrl OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..799))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the source URL for the source file to be copied.
The special form 'startup-config','running-config','system-log',
and 'attack-log' are reserved to indicate the system files.
"
::= { dsfCopyEntry 3 }
dsfCopyDstUrl OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..799))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the destination URL for the copied file.
The special form 'startup-config' and 'running-config' are reserved
to indicate the system files.
"
::= { dsfCopyEntry 4 }
dsfCopyRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of address of the remote host.
This object is meaningless if dsfCopyType is 'localToLocal'.
"
DEFVAL { ipv4 }
::= { dsfCopyEntry 5 }
dsfCopyRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the address of the remote host.
This object is meaningless if dsfCopyType is 'localToLocal'.
"
::= { dsfCopyEntry 6 }
dsfCopyUsrName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the user name on the source FTP/RCP server.
This object is meaningful only when the object dsfCopyType is
'localToFtpRemote', 'localToRcpRemote', 'ftpRemoteToLocal, or
'rcpRemoteToLocal'.
"
::= { dsfCopyEntry 7 }
dsfCopyUsrPwd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the password for the user.
This object is meaningful only when the object dsfCopyType is
'localToFtpRemote' or 'ftpRemoteToLocal'.
"
::= { dsfCopyEntry 8 }
dsfCopyRemoteTcpPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the TCP port on the remote FTP server."
::= { dsfCopyEntry 9 }
dsfCopyVrfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the name of the VRF instance to which the
TFTP/FTP/RCP server belongs."
::= { dsfCopyEntry 10 }
dsfCopyErrorStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of file copy."
::= { dsfCopyEntry 11 }
dsfCopyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
The writable columns in a row cannot be changed if the row is
'active'."
::= { dsfCopyEntry 12 }
-- -----------------------------------------------------------------------------
dsfCfgReplaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DsfCfgReplaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains the information for replacing the current running
configuration file. There will at any time be either 0 or 1 row
in this table, and the only valid index for this table is 1."
::= { dsfMIBObjects 3 }
dsfCfgReplaceEntry OBJECT-TYPE
SYNTAX DsfCfgReplaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains parameters for configure replace."
INDEX { dsfCfgReplaceIndex }
::= { dsfCfgReplaceTable 1 }
DsfCfgReplaceEntry ::= SEQUENCE {
dsfCfgReplaceIndex Unsigned32,
dsfCfgReplaceSrcType INTEGER,
dsfCfgReplaceSrcUrl OCTET STRING,
dsfCfgReplaceRemoteAddrType InetAddressType,
dsfCfgReplaceRemoteAddr InetAddress,
dsfCfgReplaceUsrName DisplayString,
dsfCfgReplaceUsrPwd DisplayString,
dsfCfgReplaceRemoteTcpPort Unsigned32,
dsfCfgReplaceVrfName DisplayString,
dsfCfgReplaceErrorStatus DisplayString,
dsfCfgReplaceRowStatus RowStatus
}
dsfCfgReplaceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object uniquely identifies this row.
The only legal value for this object is 1."
::= { dsfCfgReplaceEntry 1 }
dsfCfgReplaceSrcType OBJECT-TYPE
SYNTAX INTEGER {
local(1),
tftpRemote(2),
ftpRemote(3),
rcpRemote(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates where to get the file to replace the current
running configuration.
'local' - Get the replacing configuration file from the system.
'tftpRemote' - Get the replacing configuration file from remote host via TFTP.
'ftpRemote' - Get the replacing configuration file from remote host via FTP.
'rcpRemote' - Get the replacing configuration file from remote host via RCP.
"
::= { dsfCfgReplaceEntry 2 }
dsfCfgReplaceSrcUrl OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..799))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the source URL for the source configuration file
to be executed."
::= { dsfCfgReplaceEntry 3 }
dsfCfgReplaceRemoteAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of address of the remote host.
This object is meaningless if dsfCfgReplaceSrcType is 'local'.
"
DEFVAL { ipv4 }
::= { dsfCfgReplaceEntry 4 }
dsfCfgReplaceRemoteAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the address of the remote host.
This object is meaningless if dsfCfgReplaceSrcType is 'local'.
"
::= { dsfCfgReplaceEntry 5 }
dsfCfgReplaceUsrName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the user name on the source FTP/RCP server.
This object is meaningful only when the object dsfCfgReplaceSrcType is
'ftpRemote', 'rcpRemote'.
"
::= { dsfCfgReplaceEntry 6 }
dsfCfgReplaceUsrPwd OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the password for the user.
This object is meaningful only when the object dsfCfgReplaceSrcType is
'ftpRemote'.
"
::= { dsfCfgReplaceEntry 7 }
dsfCfgReplaceRemoteTcpPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the TCP port on the remote FTP server."
::= { dsfCfgReplaceEntry 8 }
dsfCfgReplaceVrfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the name of the VRF instance to which the
TFTP/FTP/RCP server belongs."
::= { dsfCfgReplaceEntry 9 }
dsfCfgReplaceErrorStatus OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the processing status about the replacement of
current running configuration.
"
::= { dsfCfgReplaceEntry 10 }
dsfCfgReplaceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
The writable columns in a row cannot be changed if the row is
'active'."
::= { dsfCfgReplaceEntry 11 }
-- -----------------------------------------------------------------------------
dsfIpSrcIfObjects OBJECT IDENTIFIER ::= { dsfMIBObjects 4 }
dsfIpTftpSrcIf OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the interface whose IP address will be used as
the source address for initiating TFTP packets.
The special value of 0 indicates the interface is not specified, and
IP address of the closest interface will be used.
"
::= { dsfIpSrcIfObjects 1 }
dsfIpFtpSrcIf OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the interface whose IP address will be used as
the source address for initiating FTP packets.
The special value of 0 indicates the interface is not specified, and
IP address of the closest interface will be used.
"
::= { dsfIpSrcIfObjects 2 }
dsfIpRcpSrcIf OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the interface whose IP address will be used as
the source address for initiating RCP packets.
The special value of 0 indicates the interface is not specified, and
IP address of the closest interface will be used.
"
::= { dsfIpSrcIfObjects 3 }
-- -----------------------------------------------------------------------------
dsfClearRunCfg OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
noOp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to clear running-config when set to 'clear'.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned."
::= { dsfMIBObjects 5 }
-- -----------------------------------------------------------------------------
dsfResetSystem OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
noOp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to reset system when set to 'reset'.
It will clear system configuration, save and reboot the system.
No action is taken if this object is set to 'noOp'.
When read, the value 'noOp' is returned."
::= { dsfMIBObjects 6 }
-- -----------------------------------------------------------------------------
-- MIB Notifications statements
-- -----------------------------------------------------------------------------
dsfUploadImage NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The notification is sent when the user uploads
image file successfully."
::= { dsfMIBNotifications 1 }
dsfDownloadImage NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The notification is sent when the user downloads
image file successfully."
::= { dsfMIBNotifications 2 }
dsfUploadCfg NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The notification is sent when the user uploads
configuration file successfully."
::= { dsfMIBNotifications 3 }
dsfDownloadCfg NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The notification is sent when the user downloads
configuration file successfully."
::= { dsfMIBNotifications 4 }
dsfSaveCfg NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"The notification is sent when the user saves
configuration file successfully."
::= { dsfMIBNotifications 5 }
-- -----------------------------------------------------------------------------
-- MIB Conformance statements
-- -----------------------------------------------------------------------------
dsfCompliances OBJECT IDENTIFIER ::= { dsfMIBConformance 1 }
dsfCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
DLINKSW-SYSTEM-FILE-MIB."
MODULE
MANDATORY-GROUPS {
dsfBootInfoGroup,
dsfCopyGroup,
dsfCfgReplaceGroup,
dsfIpSrcIfGroup,
dsfClearCfgGroup
}
OBJECT dsfCopyType
DESCRIPTION
"It is compliant to support only a subset of
values: 'localToLocal', 'localToTftpRemote', and
'tftpRemoteToLocal'."
OBJECT dsfCfgReplaceSrcType
DESCRIPTION
"It is compliant to support only a subset of
values: 'local' and 'tftpRemote'."
OBJECT dsfIpTftpSrcIf
MIN-ACCESS read-only
DESCRIPTION
"read-write access is not required."
OBJECT dsfIpFtpSrcIf
MIN-ACCESS read-only
DESCRIPTION
"This object is required when FTP and configurable source
interface are supported."
OBJECT dsfIpRcpSrcIf
MIN-ACCESS read-only
DESCRIPTION
"This object is required when RCP and configurable source
interface are supported."
::= { dsfCompliances 1 }
dsfGroups OBJECT IDENTIFIER ::= { dsfMIBConformance 2 }
dsfBootInfoGroup OBJECT-GROUP
OBJECTS {
dsfNextBootCfgUrl,
dsfNextBootImageUrl,
dsfCheckingBootImageCheck,
dsfBootImageCheckResult,
dsfBootImageUrl,
dsfBootImageInWorking,
dsfBootCfgFileUrl
}
STATUS current
DESCRIPTION
"A collection of objects providing information about the boot configuration
and boot image."
::= { dsfGroups 1 }
dsfCopyGroup OBJECT-GROUP
OBJECTS {
dsfCopyType,
dsfCopySrcUrl,
dsfCopyDstUrl,
dsfCopyRemoteAddrType,
dsfCopyRemoteAddr,
dsfCopyUsrName,
dsfCopyUsrPwd,
dsfCopyRemoteTcpPort,
dsfCopyVrfName,
dsfCopyErrorStatus,
dsfCopyRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information for the parameters
of the copy function."
::= { dsfGroups 2 }
dsfCfgReplaceGroup OBJECT-GROUP
OBJECTS {
dsfCfgReplaceSrcType,
dsfCfgReplaceSrcUrl,
dsfCfgReplaceRemoteAddrType,
dsfCfgReplaceRemoteAddr,
dsfCfgReplaceUsrName,
dsfCfgReplaceUsrPwd,
dsfCfgReplaceRemoteTcpPort,
dsfCfgReplaceVrfName,
dsfCfgReplaceErrorStatus,
dsfCfgReplaceRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information for the parameters
of the configure replace function."
::= { dsfGroups 3 }
dsfIpSrcIfGroup OBJECT-GROUP
OBJECTS {
dsfIpTftpSrcIf,
dsfIpFtpSrcIf,
dsfIpRcpSrcIf
}
STATUS current
DESCRIPTION
"A collection of objects providing information about the interface whose
IP address will be used as the source address for initiating TFTP/FTP/RCP
packets."
::= { dsfGroups 4 }
dsfClearCfgGroup OBJECT-GROUP
OBJECTS {
dsfClearRunCfg,
dsfResetSystem
}
STATUS current
DESCRIPTION
"An object providing the clear function."
::= { dsfGroups 5 }
END