mibs/MIBS/dlink/DLINKSW-VOICE-VLAN-MIB

499 lines
19 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- DLINKSW-VOICE-VLAN-MIB.mib : Voice VLAN MIB
--
-- Copyright (c) 2013 D-Link Corporation, all rights reserved.
--
-- *****************************************************************
DLINKSW-VOICE-VLAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,OBJECT-TYPE,Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
MacAddress, TruthValue, RowStatus, DateAndTime
FROM SNMPv2-TC
PortList, VlanIdOrNone
FROM Q-BRIDGE-MIB
InterfaceIndex
FROM IF-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
dlinkIndustrialCommon
FROM DLINK-ID-REC-MIB
LldpPortNumber, LldpChassisIdSubtype, LldpChassisId, LldpPortIdSubtype,
LldpPortId
FROM LLDP-MIB;
dlinkSwVoiceVlanMIB MODULE-IDENTITY
LAST-UPDATED "201304260000Z"
ORGANIZATION "D-Link Corp."
CONTACT-INFO
" D-Link Corporation
Postal: No. 289, Sinhu 3rd Rd., Neihu District,
Taipei City 114, Taiwan, R.O.C
Tel: +886-2-66000123
E-mail: tsd@dlink.com.tw
"
DESCRIPTION
"The MIB module for managing voice VLAN feature."
REVISION "201304260000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { dlinkIndustrialCommon 74}
-- -----------------------------------------------------------------------------
-- Node definitions
-- -----------------------------------------------------------------------------
dVoiceVlanMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwVoiceVlanMIB 0 }
dVoiceVlanMIBObjects OBJECT IDENTIFIER ::= { dlinkSwVoiceVlanMIB 1 }
dVoiceVlanMIBConformance OBJECT IDENTIFIER ::= { dlinkSwVoiceVlanMIB 2 }
-- -----------------------------------------------------------------------------
-- dVoiceVlanGlobal
-- -----------------------------------------------------------------------------
dVoiceVlanGlobal OBJECT IDENTIFIER ::= { dVoiceVlanMIBObjects 1 }
dVoiceVlanVlanId OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object specifies the voice VLAN on a switch.
A value of zero indicates that no voice VLAN has been
configured.
It is required to configure the global dVoiceVlanVlanId and enable
dVoiceVlanIfEnabled to start the voice VLAN function
on a port."
DEFVAL { 0 }
::= { dVoiceVlanGlobal 1 }
dVoiceVlanQos OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The priority for the voice VLAN, which is used to distinguish
the QoS of the voice traffic from data traffic."
DEFVAL { 5 }
::= { dVoiceVlanGlobal 2 }
dVoiceVlanAgingTime OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aging time for the voice VLAN, for aging out the voice
device and the voice VLAN automatically learned member ports."
DEFVAL { 720 }
::= { dVoiceVlanGlobal 3 }
dVoiceVlanOuiTable OBJECT-TYPE
SYNTAX SEQUENCE OF DVoiceVlanOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the voice VLAN OUI configuration."
::= { dVoiceVlanGlobal 4 }
dVoiceVlanOuiEntry OBJECT-TYPE
SYNTAX DVoiceVlanOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry indicates an OUI information, which is used to classify
voice traffic into the voice VLAN. If the source MAC addresses of
the received packet matches any of the OUI pattern, the received
packet is determined as voice packet. "
INDEX { dVoiceVlanOuiAddr, dVoiceVlanOuiMask}
::= { dVoiceVlanOuiTable 1 }
DVoiceVlanOuiEntry ::=
SEQUENCE {
dVoiceVlanOuiAddr MacAddress,
dVoiceVlanOuiMask MacAddress,
dVoiceVlanOuiDes SnmpAdminString,
dVoiceVlanOuiRowStatus RowStatus
}
dVoiceVlanOuiAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the OUI referring to this VoiceVlanOuiEntry."
::= { dVoiceVlanOuiEntry 1 }
dVoiceVlanOuiMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the OUI MAC address matching bitmask."
::= { dVoiceVlanOuiEntry 2 }
dVoiceVlanOuiDes OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The description of the OUI. A zero length string of this object indicates
there is no description for this OUI."
::= { dVoiceVlanOuiEntry 3 }
dVoiceVlanOuiRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the status of this entry."
::= { dVoiceVlanOuiEntry 4 }
-- -----------------------------------------------------------------------------
dVoiceVlanInterface OBJECT IDENTIFIER ::= { dVoiceVlanMIBObjects 2 }
dVoiceVlanInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DVoiceVlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the interface-specific voice VLAN parameters."
::= { dVoiceVlanInterface 1 }
dVoiceVlanInterfaceEntry OBJECT-TYPE
SYNTAX DVoiceVlanInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry indicates the voice VLAN parameters for a port/port-channel."
INDEX { dVoiceVlanIfIndex }
::= { dVoiceVlanInterfaceTable 1 }
DVoiceVlanInterfaceEntry ::=
SEQUENCE {
dVoiceVlanIfIndex InterfaceIndex,
dVoiceVlanIfEnabled TruthValue,
dVoiceVlanIfMode INTEGER
}
dVoiceVlanIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the ifIndex of the physical port/port-channel interface."
::= { dVoiceVlanInterfaceEntry 1 }
dVoiceVlanIfEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the voice VLAN is enabled at the port."
::= { dVoiceVlanInterfaceEntry 2 }
dVoiceVlanIfMode OBJECT-TYPE
SYNTAX INTEGER{
autoUntagged(1),
autoTagged(2),
manual(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If auto learning is enabled, the port will be automatically learned
as voice VLAN member.
When the port is working in auto tagged mode, and the port captures
a voice device through the device's OUI, it will join the voice VLAN
as a tagged member automatically. When the voice device sends tagged
packets, the switch will change its priority. When the voice device
sends untagged packets, it will forward them in port's PVID VLAN.
When the port is working in auto untagged mode, and the port captures
a voice device through the device's OUI, it will join the voice VLAN
as an untagged member automatically. When the voice device sends tagged
packets, the switch will change its priority. When the voice device
sends untagged packets, it will forward them in voice VLAN."
::= { dVoiceVlanInterfaceEntry 3 }
-- -----------------------------------------------------------------------------
dVoiceVlanInfo OBJECT IDENTIFIER ::= { dVoiceVlanMIBObjects 3 }
dVoiceVlanMemberPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The voice VLAN's member ports, includes the dynamically
learned ports."
::= { dVoiceVlanInfo 1 }
dVoiceVlanDynamicMemberPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The voice VLAN's dynamically learned member ports."
::= { dVoiceVlanInfo 2 }
dVoiceVlanDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DVoiceVlanDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the information about the learned voice devices."
::= { dVoiceVlanInfo 3 }
dVoiceVlanDeviceEntry OBJECT-TYPE
SYNTAX DVoiceVlanDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the information of the connected voice device."
INDEX {
dVoiceVlanDevicePortIfindex,
dVoiceVlanDeviceAddr }
::= { dVoiceVlanDeviceTable 1 }
DVoiceVlanDeviceEntry ::=
SEQUENCE {
dVoiceVlanDevicePortIfindex InterfaceIndex,
dVoiceVlanDeviceAddr MacAddress,
dVoiceVlanDeviceStartTime DateAndTime,
dVoiceVlanDeviceStatus INTEGER
}
dVoiceVlanDevicePortIfindex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the ifIndex of the port to which the voice device connects."
::= { dVoiceVlanDeviceEntry 1 }
dVoiceVlanDeviceAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the MAC address of the voice device."
::= { dVoiceVlanDeviceEntry 2 }
dVoiceVlanDeviceStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the start time of the connected voice device."
::= { dVoiceVlanDeviceEntry 3 }
dVoiceVlanDeviceStatus OBJECT-TYPE
SYNTAX INTEGER{
active(1),
aging(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of the connected voice device."
::= { dVoiceVlanDeviceEntry 4 }
-- -----------------------------------------------------------------------------
dVoiceVlanLldpMedDeviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DVoiceVlanLldpMedDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the voice devices that are learned through LLDP-MED."
::= { dVoiceVlanInfo 4 }
dVoiceVlanLldpMedDeviceEntry OBJECT-TYPE
SYNTAX DVoiceVlanLldpMedDeviceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the information of a voice device learned through
LLDP-MED."
INDEX { dVoiceVlanLldpMedDeviceIndex }
::= { dVoiceVlanLldpMedDeviceTable 1 }
DVoiceVlanLldpMedDeviceEntry ::=
SEQUENCE {
dVoiceVlanLldpMedDeviceIndex Unsigned32,
dVoiceVlanLldpMedDeviceLocalPort LldpPortNumber,
dVoiceVlanLldpMedDevChIdSubtype LldpChassisIdSubtype,
dVoiceVlanLldpMedDevChassisId LldpChassisId,
dVoiceVlanLldpMedDevPoIdSubtype LldpPortIdSubtype,
dVoiceVlanLldpMedDevicePortId LldpPortId,
dVoiceVlanLldpMedDevCreateTime DateAndTime,
dVoiceVlanLldpMedDevRemainTime Unsigned32
}
dVoiceVlanLldpMedDeviceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local index used to identify the entry."
::= { dVoiceVlanLldpMedDeviceEntry 1 }
dVoiceVlanLldpMedDeviceLocalPort OBJECT-TYPE
SYNTAX LldpPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the local port number on which the voice
device is learned."
::= { dVoiceVlanLldpMedDeviceEntry 2 }
dVoiceVlanLldpMedDevChIdSubtype OBJECT-TYPE
SYNTAX LldpChassisIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of encoding used to identify the chassis associated with
the voice device."
REFERENCE
"IEEE Std 802.1AB-2005 9.5.2.2"
::= { dVoiceVlanLldpMedDeviceEntry 3 }
dVoiceVlanLldpMedDevChassisId OBJECT-TYPE
SYNTAX LldpChassisId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the chassis component associated
with the voice device."
REFERENCE
"IEEE Std 802.1AB-2005 9.5.2.3"
::= { dVoiceVlanLldpMedDeviceEntry 4 }
dVoiceVlanLldpMedDevPoIdSubtype OBJECT-TYPE
SYNTAX LldpPortIdSubtype
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of port identifier encoding used to identify the port component
associated with the voice device."
REFERENCE
"IEEE Std 802.1AB-2005 9.5.3.2"
::= { dVoiceVlanLldpMedDeviceEntry 5 }
dVoiceVlanLldpMedDevicePortId OBJECT-TYPE
SYNTAX LldpPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The string value used to identify the port component associated with
the voice device."
REFERENCE
"IEEE Std 802.1AB-2005 9.5.3.3"
::= { dVoiceVlanLldpMedDeviceEntry 6 }
dVoiceVlanLldpMedDevCreateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The creation time of the voice device."
::= { dVoiceVlanLldpMedDeviceEntry 7}
dVoiceVlanLldpMedDevRemainTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Time-To-Live (in seconds) remaining for the voice device.
If the Remain Time decreases to 0, the voice device will be deleted."
::= { dVoiceVlanLldpMedDeviceEntry 8}
-- -----------------------------------------------------------------------------
-- MIB Conformance statements
-- -----------------------------------------------------------------------------
dVoiceVlanMIBCompliances OBJECT IDENTIFIER
::= { dVoiceVlanMIBConformance 1 }
dVoiceVlanMIBGroups OBJECT IDENTIFIER
::= { dVoiceVlanMIBConformance 2 }
dVoiceVlanMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
DLINKSW-VOICE-VLAN-MIB."
MODULE -- this module
MANDATORY-GROUPS { dVoiceVlanBasicGroup }
GROUP dVoiceVlanOUICfgGroup
DESCRIPTION
"This group is required for entities that implement classifying
voice traffic based on OUI patterns."
GROUP dVoiceVlanDeviceInfoGroup
DESCRIPTION
"This group is required for entities that display voice vlan
device infomation."
GROUP dVoiceVlanDeviceLldpMedInfoGroup
DESCRIPTION
"This group is optional."
::= { dVoiceVlanMIBCompliances 1 }
dVoiceVlanBasicGroup OBJECT-GROUP
OBJECTS {
dVoiceVlanVlanId,
dVoiceVlanQos,
dVoiceVlanAgingTime,
dVoiceVlanIfEnabled,
dVoiceVlanIfMode,
dVoiceVlanMemberPorts,
dVoiceVlanDynamicMemberPorts}
STATUS current
DESCRIPTION
"A collection of objects to configure or display the status
of voice VLAN feature."
::= { dVoiceVlanMIBGroups 1 }
dVoiceVlanOUICfgGroup OBJECT-GROUP
OBJECTS {
dVoiceVlanOuiDes,
dVoiceVlanOuiRowStatus }
STATUS current
DESCRIPTION
"A collection of objects to configure voice device OUI(s)."
::= { dVoiceVlanMIBGroups 2 }
dVoiceVlanDeviceInfoGroup OBJECT-GROUP
OBJECTS {
dVoiceVlanDeviceStartTime,
dVoiceVlanDeviceStatus
}
STATUS current
DESCRIPTION
"A collection of objects to display voice device(s)."
::= { dVoiceVlanMIBGroups 3 }
dVoiceVlanDeviceLldpMedInfoGroup OBJECT-GROUP
OBJECTS {
dVoiceVlanLldpMedDeviceLocalPort,
dVoiceVlanLldpMedDevChIdSubtype,
dVoiceVlanLldpMedDevChassisId,
dVoiceVlanLldpMedDevPoIdSubtype,
dVoiceVlanLldpMedDevicePortId,
dVoiceVlanLldpMedDevCreateTime,
dVoiceVlanLldpMedDevRemainTime
}
STATUS current
DESCRIPTION
"A collection of objects displays information learned via LLDP-MED."
::= { dVoiceVlanMIBGroups 4 }
END