david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/edgecos/ECS4210-MIB

17395 lines
626 KiB
Plaintext
Raw Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
ECS4210-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32, Counter32,IpAddress,
NOTIFICATION-TYPE, enterprises, TimeTicks
FROM SNMPv2-SMI
DisplayString, RowStatus, TruthValue, MacAddress
FROM SNMPv2-TC
PortList, VlanIndex, VlanId, dot1qVlanStaticEntry, dot1qStaticUnicastEntry
FROM Q-BRIDGE-MIB
InetAddressType, InetAddress, InetAddressPrefixLength, InetAddressIPv6
FROM INET-ADDRESS-MIB
InterfaceIndex, ifIndex
FROM IF-MIB
EnabledStatus
FROM P-BRIDGE-MIB
BridgeId, Timeout, dot1dStpPort,dot1dStpPortEntry, MacAddress
FROM BRIDGE-MIB
dot1xAuthConfigEntry
FROM IEEE8021-PAE-MIB
pethMainPseEntry, pethPsePortEntry
FROM POWER-ETHERNET-MIB;
accton OBJECT IDENTIFIER ::= { enterprises 259 }
edgecorenetworks OBJECT IDENTIFIER ::= { accton 10 }
edgeCoreNetworksMgt OBJECT IDENTIFIER ::= { edgecorenetworks 1 }
ecs4210MIBSeries OBJECT IDENTIFIER ::= { edgeCoreNetworksMgt 42 }
ecs4210MIB MODULE-IDENTITY
LAST-UPDATED "201302070000Z"
ORGANIZATION "Edgecore Networks, Inc."
CONTACT-INFO
"Edgecore Networks, Inc.
Customer Service
Postal: No. 1 Creation Rd. III,
Science-based Industrial Park,
Hsinchu 300-77, Taiwan, R.O.C.
Tel: +886-3-5770270
Fax: +886-3-5780764
E-mail: brandsupport@edge-core.com
company website:www.edge-core.com
technical support:brandsupport@edge-core.com"
DESCRIPTION
"The MIB module for ECS4210-Series."
REVISION "201202070000Z"
DESCRIPTION
"Initial version of this MIB."
::= { ecs4210MIBSeries 101 }
ecs4210MIBObjects OBJECT IDENTIFIER ::= { ecs4210MIB 1 }
ecs4210Notifications OBJECT IDENTIFIER ::= { ecs4210MIB 2 }
--supported groups
switchMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 1 }
portMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 2 }
trunkMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 3 }
lacpMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 4 }
staMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 5 }
restartMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 7 }
mirrorMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 8 }
igmpSnoopMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 9 }
ipMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 10 }
vlanMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 12 }
priorityMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 13 }
trapDestMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 14 }
qosMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 16 }
securityMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 17 }
sysLogMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 19 }
lineMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 20 }
sysTimeMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 23 }
fileMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 24 }
dnsMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 26 }
poeMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 28 }
stormMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 33 }
sysResourceMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 39 }
mvrMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 44 }
dhcpSnoopMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 46 }
clusterMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 47 }
ipSrcGuardMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 48 }
upnpMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 49 }
mldSnoopMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 54 }
dynamicArpInspectionMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 56 }
pppoeiaMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 60 }
lbdMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 63 }
ipv6RaGuardMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 67 }
udldMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 69 }
dhcpv6SnoopMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 71 }
mDnsMgt OBJECT IDENTIFIER ::= { ecs4210MIBObjects 75 }
-- ecs4210-28t OBJECT IDENTIFIER ::= { cheetahSwitchMgt 101 }
-- ecs4210-28p OBJECT IDENTIFIER ::= { cheetahSwitchMgt 102 }
-- ecs4210-12t OBJECT IDENTIFIER ::= { cheetahSwitchMgt 103 }
-- ecs4210-12p OBJECT IDENTIFIER ::= { cheetahSwitchMgt 104 }
-- -------------------------------------------------------------
-- Textual Conventions
-- -------------------------------------------------------------
KeySegment ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The total length of the key is 1024 characters,
it is divided into 8 parts and stored in 8 separated mib
variables as below:
Key1: part 1 of the key (1-128)
Key2: part 2 of the key (129-256)
Key3: part 3 of the key (257-384)
Key4: part 4 of the key (385-512)
Key5: part 5 of the key (513-640)
Key6: part 6 of the key (641-768)
Key7: part 7 of the key (769-896)
Key8: part 8 of the key (897-1024)
Please note that if the key string is less then 1024 characters,
the remaining part of the string will be filled by a zero-length string.
For example, if the length of the key is 129,
we will get a string of length 128 in Key1, and
a string of length 1 in Key2,
moreover, Key3 to Key8 will all be zero-length strings."
SYNTAX DisplayString(SIZE(0..128))
ValidStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A simple status value for the object to create and destroy
a table entry. This is a simplified variant of RowStatus as it
supports only two values. Setting it to valid(1) creates an entry.
Setting it to invalid(2) destroys an entry."
SYNTAX INTEGER { valid(1), invalid(2) }
StaPathCostMode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The path cost mode of a spanning tree algorithm, short(1) indicates
that we retrieve/configure the spanning tree path cost as a 16 bit
value and long(2) indicates that we retrieve/configure the spanning
tree path cost as a 32 bit value."
SYNTAX INTEGER { short(1), long(2) }
--
-- switchMgt
--
-- Management for the switch system, or individual units
-- in a stackable switch system. For a non-stackable system,
-- only unit 1 exists.
switchManagementVlan OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The VLAN on which management is done."
::= { switchMgt 1 }
switchNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of switches present on this system."
::= { switchMgt 2 }
switchInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information about
the switch units in this system."
::= { switchMgt 3 }
switchInfoEntry OBJECT-TYPE
SYNTAX SwitchInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table providing descriptions and status information for
switch units."
INDEX { swUnitIndex }
::= { switchInfoTable 1 }
SwitchInfoEntry ::= SEQUENCE
{
swUnitIndex Integer32,
swHardwareVer DisplayString,
swMicrocodeVer DisplayString,
swLoaderVer DisplayString,
swBootRomVer DisplayString,
swOpCodeVer DisplayString,
swPortNumber Integer32,
swPowerStatus INTEGER,
swRoleInSystem INTEGER,
swSerialNumber DisplayString,
swServiceTag DisplayString,
swModelNumber DisplayString,
swEpldVer DisplayString
}
swUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber."
::= { switchInfoEntry 1 }
swHardwareVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Hardware version of the main board."
::= { switchInfoEntry 2 }
swMicrocodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Microcode version of the main board."
::= { switchInfoEntry 3 }
swLoaderVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Loader version of the main board."
::= { switchInfoEntry 4 }
swBootRomVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Boot ROM code version of the main board."
::= { switchInfoEntry 5 }
swOpCodeVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Operation code version of the main board."
::= { switchInfoEntry 6 }
swPortNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of ports on this switch."
::= { switchInfoEntry 7 }
swPowerStatus OBJECT-TYPE
SYNTAX INTEGER
{
internalPower(1),
redundantPower(2),
internalAndRedundantPower(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the switch using internalPower(1),
redundantPower(2) or both(3)"
::= { switchInfoEntry 8 }
swRoleInSystem OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
backupMaster(2),
slave(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system."
::= { switchInfoEntry 9 }
swSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Serial number of the switch."
::= { switchInfoEntry 10 }
swServiceTag OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service tag serial-number of the switch."
::= { switchInfoEntry 13 }
swModelNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Model number of the switch."
::= { switchInfoEntry 14 }
swEpldVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The EPLD version of the switch."
::= { switchInfoEntry 15 }
switchOperState OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
unknown(2),
ok(3),
noncritical(4),
critical(5),
nonrecoverable(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Global operation state of the switch."
::= { switchMgt 4 }
switchProductId OBJECT IDENTIFIER ::= { switchMgt 5 }
swProdName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The product name of this switch."
::= { switchProductId 1 }
swProdManufacturer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The product manufacturer of this switch."
::= { switchProductId 2 }
swProdDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The product description of this switch."
::= { switchProductId 3 }
swProdVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The runtime code version of this switch."
::= { switchProductId 4 }
swProdUrl OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The URL of this switch, which we can connect through
a web browser."
::= { switchProductId 5 }
swIdentifier OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A unique identifier of which switch in the chassis is currently
being looked at."
::= { switchProductId 6 }
swChassisServiceTag OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The service tag of the chassis this switch resides in."
::= { switchProductId 7 }
switchIndivPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SwitchIndivPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table about the status of individual powers."
::= { switchMgt 6 }
switchIndivPowerEntry OBJECT-TYPE
SYNTAX SwitchIndivPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table about the status of individual power."
INDEX { swIndivPowerUnitIndex, swIndivPowerIndex }
::= { switchIndivPowerTable 1 }
SwitchIndivPowerEntry ::= SEQUENCE
{
swIndivPowerUnitIndex Integer32,
swIndivPowerIndex INTEGER,
swIndivPowerStatus INTEGER
}
swIndivPowerUnitIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This is defined as swUnitIndex."
::= { switchIndivPowerEntry 1 }
swIndivPowerIndex OBJECT-TYPE
SYNTAX INTEGER
{
internalPower(1),
externalPower(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "1 means internal power, 2 means external power."
::= { switchIndivPowerEntry 2 }
swIndivPowerStatus OBJECT-TYPE
SYNTAX INTEGER
{
notPresent(1),
green(2),
red(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "notPresent(1) means not present, green(2) means
up, red(3) means down."
::= { switchIndivPowerEntry 3 }
switchJumboFrameStatus OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "enable(1) means the Jumbo Frame has enabled, disabled(2)
means the Jumbo Frame has disabled."
::= { switchMgt 7 }
amtrMgt OBJECT IDENTIFIER ::= { switchMgt 8 }
-- Address Management
amtrMacAddrAgingStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If this is enabled(1), the MAC address table will age out according to
its timer. If this is disabled(2), the MAC address table will not
age out."
::= { amtrMgt 3 }
--- amtr authentication
amtrMacAddrIsolationStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to enabled(1) to start AMTR MAC Isolation,
Set this variable to disabled(2) to stop AMTR MAC Isolation."
DEFVAL { disabled }
::= { amtrMgt 7 }
amtrMacAddrStickyDynamicInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AmtrMacAddrStickyDynamicInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table about the status of MAC address stickey-dynamic by
interface id."
::= { amtrMgt 8 }
amtrMacAddrStickyDynamicInterfaceEntry OBJECT-TYPE
SYNTAX AmtrMacAddrStickyDynamicInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of MAC address sticky-dynamic by interface
ID."
INDEX { amtrMacAddrStickyDynamicInterfaceIndex }
::= { amtrMacAddrStickyDynamicInterfaceTable 1 }
AmtrMacAddrStickyDynamicInterfaceEntry ::= SEQUENCE
{
amtrMacAddrStickyDynamicInterfaceIndex InterfaceIndex,
amtrMacAddrStickyDynamicInterfaceStatus EnabledStatus,
amtrMacAddrStickyDynamicInterfaceAction INTEGER
}
amtrMacAddrStickyDynamicInterfaceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface number of sticky-dynamic MAC address.
The interface identified by a particular value
of this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= {amtrMacAddrStickyDynamicInterfaceEntry 1}
amtrMacAddrStickyDynamicInterfaceStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The forbidden sticky-dynamic status on an interface."
::= {amtrMacAddrStickyDynamicInterfaceEntry 2}
amtrMacAddrStickyDynamicInterfaceAction OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
trap(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of sticky-dynamic MAC address action
on interface."
::= {amtrMacAddrStickyDynamicInterfaceEntry 3}
amtrMacAddrStickyDynamicVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AmtrMacAddrStickyDynamicVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table about the status of MAC address stickey-dynamic by
Vlan id."
::= { amtrMgt 9 }
amtrMacAddrStickyDynamicVlanEntry OBJECT-TYPE
SYNTAX AmtrMacAddrStickyDynamicVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of MAC address sticky-dynamic by VLAN
ID."
INDEX { amtrMacAddrStickyDynamicVlanIndex }
::= { amtrMacAddrStickyDynamicVlanTable 1 }
AmtrMacAddrStickyDynamicVlanEntry ::= SEQUENCE
{
amtrMacAddrStickyDynamicVlanIndex Integer32,
amtrMacAddrStickyDynamicVlanStatus EnabledStatus,
amtrMacAddrStickyDynamicVlanAction INTEGER
}
amtrMacAddrStickyDynamicVlanIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The VLAN interface number of a sticky-dynamic MAC address.
The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= {amtrMacAddrStickyDynamicVlanEntry 1}
amtrMacAddrStickyDynamicVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The forbidden sticky-dynamic status on a VLAN."
::= {amtrMacAddrStickyDynamicVlanEntry 2}
amtrMacAddrStickyDynamicVlanAction OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
trap(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of sticky-dynamic MAC address action on a VLAN"
::= {amtrMacAddrStickyDynamicVlanEntry 3}
-- Start: Add amtrMacAddrStaticTable
-- extension of dot1qStaticUnicastTable
amtrMacAddrStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF AmtrMacAddrStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The extension table of dot1qStaticUnicastTable"
::= { amtrMgt 10 }
amtrMacAddrStaticEntry OBJECT-TYPE
SYNTAX AmtrMacAddrStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry of static MAC address table"
AUGMENTS { dot1qStaticUnicastEntry }
::= { amtrMacAddrStaticTable 1 }
AmtrMacAddrStaticEntry ::= SEQUENCE
{
amtrMacAddrStaticIsolationStatus INTEGER
}
amtrMacAddrStaticIsolationStatus OBJECT-TYPE
SYNTAX INTEGER
{
promiscuous (1),
isolated (2),
community1 (3),
community2 (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The isolation status of the static MAC address for MAC table."
::= { amtrMacAddrStaticEntry 1 }
amtrMacAddrClearDynamicAddrAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
action(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets action(2) to clear dynamic MAC address from MAC address
Table. When read, this value always returns noAction(1)."
::= {amtrMgt 11}
--
-- End: Add amtrMacAddrStaticTable
--
switchRenumberUnitID OBJECT-TYPE
SYNTAX INTEGER
{
renumber(1),
noRenumber(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value renumber will automatically assign an ID to
units in the stack; all UNIT IDs will be contiguous.
The system configurations are not changed but the system
will restart after renumbering is completed."
::= { switchMgt 14 }
--
-- portMgt
--
-- Management ports. This group also provides information
-- related to trunks because they share the same properties.
portTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of descriptive and status information describing
the configuration of each switch port. This table also
contains information about each trunk."
::= { portMgt 1 }
portEntry OBJECT-TYPE
SYNTAX PortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, describing the configuration of
one switch port or trunk."
INDEX { portIndex }
::= { portTable 1 }
PortEntry ::= SEQUENCE
{
portIndex Integer32,
portName DisplayString,
portType INTEGER,
portSpeedDpxCfg INTEGER,
portFlowCtrlCfg INTEGER,
portCapabilities BITS,
portAutonegotiation EnabledStatus,
portSpeedDpxStatus INTEGER,
portFlowCtrlStatus INTEGER,
portTrunkIndex Integer32,
portComboForcedMode INTEGER,
portMasterSlaveModeCfg INTEGER,
portMacAddrLearningCount Counter32
}
portIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { portEntry 1 }
portName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the port or trunk. This is the same as ifAlias
in the IF-MIB (RFC2863 or later)."
::= { portEntry 2 }
portType OBJECT-TYPE
SYNTAX INTEGER
{
other(1),
hundredBaseTX(2),
hundredBaseFX(3),
thousandBaseSX(4),
thousandBaseLX(5),
thousandBaseT(6),
thousandBaseGBIC(7),
thousandBaseSfp(8),
hundredBaseFxScSingleMode(9),
hundredBaseFxScMultiMode(10),
thousandBaseCX(11),
tenG(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the port type of the configuration of the switch."
::= { portEntry 3 }
portSpeedDpxCfg OBJECT-TYPE
SYNTAX INTEGER
{
reserved(1),
halfDuplex10(2),
fullDuplex10(3),
halfDuplex100(4),
fullDuplex100(5),
halfDuplex1000(6),
fullDuplex1000(7),
halfDuplex10g(8),
fullDuplex10g(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configures the speed and duplex mode for a port or trunk,
according to:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100Mbps and full duplex mode
halfDuplex1000(6) - 1000Mbps and half duplex mode
fullDuplex1000(7) - 1000Mbps and full duplex mode
halfDuplex10g(8) - 10g and half duplex mode
fullDuplex10g(9) - 10g and full duplex mode
hundredBaseTX port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
hundredBaseFX port can be set as:
fullDuplex100(5)
thousandBaseSX port can be set as:
fullDuplex1000(7)
thousandBaseLX port can be set as:
fullDuplex1000(7)
thousandBaseT port can be set as:
halfDuplex10(2)
fullDuplex10(3)
halfDuplex100(4)
fullDuplex100(5)
thousandBaseGBIC port can be set as:
fullDuplex1000(7)
thousandBaseSfp port can be set as:
fullDuplex1000(7)
hundredBaseFxScSingleMode port can be set as:
fullDuplex100(5)
hundredBaseFxScMultiMode port can be set as:
fullDuplex100(5)
thousandBaseCX port can be set as:
fullDuplex1000(7)
tenG port can be set as:
halfDuplex10g(8)
fullDuplex10g(9)
The actual operating speed and duplex of the port
is given by portSpeedDpxStatus."
DEFVAL { halfDuplex10 }
::= { portEntry 4 }
portFlowCtrlCfg OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
tx(5),
rx(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "(1) Flow control mechanism is enabled with tx and rx pause
mechansim.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, the port
uses IEEE 802.3x flow control mechanism.
If the port type is hundredBaseFX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in fullDuplex mode, Flow
control mechanism will not function.
(2) Flow control mechanism is disabled.
(5) Flow control mechanism is enabled with tx pause
mechanism only.
(6) Flow control mechansim is enabled with rx pause
mechansim only.
Fast ethernet ports can be set as:
enabled(1),
disabled(2).
Gigabit ethernet ports can be set as:
enabled(1),
disabled(2),
tx(5),
rx(6).
The actual flow control mechanism is used given by
portFlowCtrlStatus."
DEFVAL { disabled }
::= { portEntry 5 }
portCapabilities OBJECT-TYPE
SYNTAX BITS
{
portCap10half(0),
portCap10full(1),
portCap100half(2),
portCap100full(3),
portCap1000half(4),
portCap1000full(5),
portCap10gHalf(6),
portCap10gFull(7),
reserved8(8),
reserved9(9),
reserved10(10),
reserved11(11),
reserved12(12),
reserved13(13),
portCapSym(14),
portCapFlowCtrl(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port or trunk capabilities."
::= { portEntry 6 }
portAutonegotiation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether auto-negotiation is enabled."
::= { portEntry 7 }
portSpeedDpxStatus OBJECT-TYPE
SYNTAX INTEGER
{
error(1),
halfDuplex10(2),
fullDuplex10(3),
halfDuplex100(4),
fullDuplex100(5),
halfDuplex1000(6),
fullDuplex1000(7),
halfDuplex10g(8),
fullDuplex10g(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operating speed and duplex mode of the
switched port or trunk. If the entry represents a trunk,
the speed is that of its individual members unless
the member ports have been inconsistently configured
in which case the value is error(1)."
::= { portEntry 8 }
portFlowCtrlStatus OBJECT-TYPE
SYNTAX INTEGER
{
error(1),
backPressure(2),
dot3xFlowControl(3),
none(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "(2) BackPressure flow control mechanism is used.
(3) IEEE 802.3 flow control mechanism is used.
(4) Flow control mechanism is disabled.
If the entry represents a trunk and the member ports
have been inconsistently configured then this value
is error(1)."
::= { portEntry 9 }
portTrunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to a trunk in the trunkIndex, defined by the
corresponding trunkPorts."
::= { portEntry 10 }
portComboForcedMode OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
copperForced(2),
copperPreferredAuto(3),
sfpForced(4),
sfpPreferredAuto(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This determines the running mode of a combo port.
For a non-combo port, this variable has a value of none(1),
and setting this variable to none(1) has no effect.
For a combo port, this has its own valid values not
equal to none(1), and setting this variable to none(1) is
not allowed. copperForced(2) is set if user want to force
this combo port running in copper mode. copperPreferredAuto(3)
is obsoleted, and user shall not set this state. sfpForced(4)
is set if user want to force this combo port running in fiber
mode. sfpPreferredAuto(5) is set if user want to change copper or
fiber mode automatically by SFP transceiver present state. If SFP
transceiver is present, this combo port will run in fiber mode, and
if SFP transceiver is not present, this combo port will run in
copper mode."
::= { portEntry 12}
portMasterSlaveModeCfg OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
slave(2),
auto(3),
autoPreferMaster(4),
autoPreferSlave(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configures the PHY mode when auto negotiation is disabled and
speed-duplex is 1000full for giga copper port."
::= { portEntry 15 }
portMacAddrLearningCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of learned MAC addresses."
::= { portEntry 18 }
--
-- cable diagnostics
--
cableDiagMgt OBJECT IDENTIFIER ::= { portMgt 3 }
cableDiagCtlAction OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To execute cable diagnostics on a port, assign
cableDiagCtlAction to the value of ifIndex defined
by the ifIndex in the IF-MIB. When read, this object
always returns 0."
::= { cableDiagMgt 1 }
cableDiagResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF CableDiagResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for cable diagnostics result."
::= { cableDiagMgt 2 }
cableDiagResultEntry OBJECT-TYPE
SYNTAX CableDiagResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for cable diagnostics result."
INDEX { cableDiagResultIfIndex }
::= { cableDiagResultTable 1 }
CableDiagResultEntry ::= SEQUENCE
{
cableDiagResultIfIndex Integer32,
cableDiagResultStatusPairA INTEGER,
cableDiagResultStatusPairB INTEGER,
cableDiagResultStatusPairC INTEGER,
cableDiagResultStatusPairD INTEGER,
cableDiagResultDistancePairA Integer32,
cableDiagResultDistancePairB Integer32,
cableDiagResultDistancePairC Integer32,
cableDiagResultDistancePairD Integer32,
cableDiagResultTime DisplayString
}
cableDiagResultIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as the ifIndex."
::= { cableDiagResultEntry 1 }
cableDiagResultStatusPairA OBJECT-TYPE
SYNTAX INTEGER
{
notTestedYet(1),
ok(2),
open(3),
unknown(7),
failed(9),
notSupported(10),
intraShort(12),
interShort(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of cable diagnostics. Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack of
continuity between pins at each end of the pair. Value
unknown(7) means pair has an error matching none. Value
failed(9) means test failed. Value notSupported(10) means
cable diagnostics is not supported. Value intraShort(12)
means there is intra-short. Value interShort(13) means
there is inter-short."
::= { cableDiagResultEntry 2 }
cableDiagResultStatusPairB OBJECT-TYPE
SYNTAX INTEGER
{
notTestedYet(1),
ok(2),
open(3),
unknown(7),
failed(9),
notSupported(10),
intraShort(12),
interShort(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of cable diagnostics. Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack of
continuity between pins at each end of the pair. Value
unknown(7) means pair has an error matching none. Value
failed(9) means test failed. Value notSupported(10) means
cable diagnostics is not supported. Value intraShort(12)
means there is intra-short. Value interShort(13) means
there is inter-short."
::= { cableDiagResultEntry 3 }
cableDiagResultStatusPairC OBJECT-TYPE
SYNTAX INTEGER
{
notTestedYet(1),
ok(2),
open(3),
unknown(7),
failed(9),
notSupported(10),
intraShort(12),
interShort(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of cable diagnostics. Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack of
continuity between pins at each end of the pair. Value
unknown(7) means pair has an error matching none. Value
failed(9) means test failed. Value notSupported(10) means
cable diagnostics is not supported. Value intraShort(12)
means there is intra-short. Value interShort(13) means
there is inter-short."
::= { cableDiagResultEntry 4 }
cableDiagResultStatusPairD OBJECT-TYPE
SYNTAX INTEGER
{
notTestedYet(1),
ok(2),
open(3),
unknown(7),
failed(9),
notSupported(10),
intraShort(12),
interShort(13)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of cable diagnostics. Value notTestedYet(1)
means the pair is not tested yet. Value ok(2) means the
pair works well. Value open(3) means there is a lack of
continuity between pins at each end of the pair. Value
unknown(7) means pair has an error matching none. Value
failed(9) means test failed. Value notSupported(10) means
cable diagnostics is not supported. Value intraShort(12)
means there is intra-short. Value interShort(13) means
there is inter-short."
::= { cableDiagResultEntry 5 }
cableDiagResultDistancePairA OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the fault distance of pair A of the cable
in meters."
::= { cableDiagResultEntry 6 }
cableDiagResultDistancePairB OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the fault distance of pair B of the cable
in meters."
::= { cableDiagResultEntry 7 }
cableDiagResultDistancePairC OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the fault distance of pair C of the cable
in meters."
::= { cableDiagResultEntry 8 }
cableDiagResultDistancePairD OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the fault distance of pair D of the cable
in meters."
::= { cableDiagResultEntry 9 }
cableDiagResultTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the last time of cable diagnostics.
For example, 'Jan 1 02:03:04 2002'."
::= { cableDiagResultEntry 11 }
--
-- loopback
--
loopbackTestMgt OBJECT IDENTIFIER ::= { portMgt 4 }
loopInternalCtlAction OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To execute internal loopback test on a port, assign
loopInternalCtlAction to the value of ifIndex defined
by the ifIndex in the IF-MIB. When read, this object
always returns 0."
::= { loopbackTestMgt 1 }
loopInternalResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoopInternalResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for internal loopback test result."
::= { loopbackTestMgt 2 }
loopInternalResultEntry OBJECT-TYPE
SYNTAX LoopInternalResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for internal loopback test result."
INDEX { loopInternalResultIfIndex }
::= { loopInternalResultTable 1 }
LoopInternalResultEntry ::= SEQUENCE
{
loopInternalResultIfIndex Integer32,
loopInternalResultStatus INTEGER,
loopInternalResultTime DisplayString
}
loopInternalResultIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as the ifIndex."
::= { loopInternalResultEntry 1 }
loopInternalResultStatus OBJECT-TYPE
SYNTAX INTEGER
{
notTestedYet(1),
succeeded(2),
failed(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of internal loopback."
::= { loopInternalResultEntry 2 }
loopInternalResultTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the last time of internal loopback.
For example, 'Jan 1 02:03:04 2002'."
::= { loopInternalResultEntry 3 }
portUtilTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortUtilEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dispalys port utilization during recent 300 seconds."
::= { portMgt 6 }
portUtilEntry OBJECT-TYPE
SYNTAX PortUtilEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Dispalys port utilization during recent 300 seconds."
INDEX { portUtilIfIndex }
::= { portUtilTable 1 }
PortUtilEntry ::= SEQUENCE
{
portUtilIfIndex Integer32,
portInOctetRate Counter64,
portInPacketRate Counter64,
portInUtil Integer32,
portOutOctetRate Counter64,
portOutPacketRate Counter64,
portOutUtil Integer32
}
portUtilIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and trunk interface of the portUtilTable.
The interface identified by a particular value of this
index is the same interface identified by the same value
of ifIndex in the IF-MIB."
::= { portUtilEntry 1 }
portInOctetRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The input octet rate (kbits/sec) of the port."
::= { portUtilEntry 2 }
portInPacketRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The input packet rate (pkts/sec) of the port."
::= { portUtilEntry 3 }
portInUtil OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The input utilization of the port, in one per
hundred."
::= { portUtilEntry 4 }
portOutOctetRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The output octet rate (kbits/sec) of the port."
::= { portUtilEntry 5 }
portOutPacketRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The output packet rate (pkts/sec) of the port."
::= { portUtilEntry 6 }
portOutUtil OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The output utilization of the port, in one per
hundred."
::= { portUtilEntry 7 }
portVlanTrunkingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortVlanTrunkingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configures vlan trunking feature."
::= { portMgt 7 }
portVlanTrunkingEntry OBJECT-TYPE
SYNTAX PortVlanTrunkingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configures vlan trunking feature."
INDEX { portVlanTrunkingIfIndex }
::= { portVlanTrunkingTable 1 }
PortVlanTrunkingEntry ::= SEQUENCE
{
portVlanTrunkingIfIndex Integer32,
portVlanTrunkingStatus EnabledStatus
}
portVlanTrunkingIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and trunk interface of the portVlanTrunkingTable.
The interface identified by a particular value of this
index is the same interface identified by the same value
of ifIndex in the IF-MIB."
::= { portVlanTrunkingEntry 1 }
portVlanTrunkingStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to enabled(1) to enable the feature. Set this
variable to disabled(2) to disable the feature."
::= { portVlanTrunkingEntry 2 }
--
-- Show Media Information
-- Information of the media device installed in the physical ports.
--
portMediaInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortMediaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table lists the information of the media device
(SFP/XFP/Copper) installed in the physical port.
Only the ifIndices of Ethernet ports those are associated
with the operational cards will be included in this table."
::= { portMgt 10 }
portMediaInfoEntry OBJECT-TYPE
SYNTAX PortMediaInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the Interface Media Information table.
The ifIndices of ethernet interfaces will be used
to index this table."
INDEX { portMediaInfoIfIndex }
::= { portMediaInfoTable 1 }
PortMediaInfoEntry ::=
SEQUENCE {
portMediaInfoIfIndex
Integer32,
portMediaInfoConnectorType
DisplayString,
portMediaInfoFiberType
DisplayString,
portMediaInfoEthComplianceCodes
DisplayString,
portMediaInfoBaudRate
DisplayString,
portMediaInfoVendorOUI
DisplayString,
portMediaInfoVendorName
DisplayString,
portMediaInfoPartNumber
DisplayString,
portMediaInfoRevision
DisplayString,
portMediaInfoSerialNumber
DisplayString,
portMediaInfoDateCode
DisplayString
}
portMediaInfoIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "ifindex."
::= { portMediaInfoEntry 1 }
portMediaInfoConnectorType OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The connector type."
::= { portMediaInfoEntry 2 }
portMediaInfoFiberType OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The fiber type."
::= { portMediaInfoEntry 3 }
portMediaInfoEthComplianceCodes OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The ethernet compliance codes."
::= { portMediaInfoEntry 4 }
portMediaInfoBaudRate OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The baud rate."
::= { portMediaInfoEntry 5 }
portMediaInfoVendorOUI OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The OUI of the vendor."
::= { portMediaInfoEntry 6 }
portMediaInfoVendorName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The media vendor name, full name of the corporation."
::= { portMediaInfoEntry 7 }
portMediaInfoPartNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The media vendor part number."
::= { portMediaInfoEntry 8 }
portMediaInfoRevision OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The media vendor product version number."
::= { portMediaInfoEntry 9 }
portMediaInfoSerialNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The vendor serial number of the media device."
::= { portMediaInfoEntry 10 }
portMediaInfoDateCode OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The date code of the media device."
::= { portMediaInfoEntry 11 }
-- ifIndex to Optical Parameters Table
-- Given an ifIndex, this table returns the optical parameters for the ifIndex.
portOpticalMonitoringInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortOpticalMonitoringInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table lists the instrumented parameters of all
optical interfaces."
REFERENCE "ITU recommendations G.783, G.784, G.953"
::= { portMgt 11 }
portOpticalMonitoringInfoEntry OBJECT-TYPE
SYNTAX PortOpticalMonitoringInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Only the ifIndices of optical interfaces
whose parameters need to be monitored will
be used to index this table."
INDEX { portOpticalMonitoringInfoIfIndex }
::= { portOpticalMonitoringInfoTable 1 }
PortOpticalMonitoringInfoEntry ::=
SEQUENCE {
portOpticalMonitoringInfoIfIndex
InterfaceIndex,
portOpticalMonitoringInfoTemperature
DisplayString,
portOpticalMonitoringInfoVcc
DisplayString,
portOpticalMonitoringInfoTxBiasCurrent
DisplayString,
portOpticalMonitoringInfoTxPower
DisplayString,
portOpticalMonitoringInfoRxPower
DisplayString
}
portOpticalMonitoringInfoIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "ifindex."
::= { portOpticalMonitoringInfoEntry 1 }
portOpticalMonitoringInfoTemperature OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object holds the value of the transmitter laser
diode temperature for the interface. This object
indicates the health of the transmitter.
The format is xxx.yyyy C(elcius). If the device supports
ALARM WARNING TRAP, then followed by whether the measured
value is normal, high/low alarm or high/low warning."
::= { portOpticalMonitoringInfoEntry 2 }
portOpticalMonitoringInfoVcc OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object holds the value of the Vcc. It is measured
in V. If the device supports ALARM WARNING TRAP, then
followed by whether the measured value is normal,
high/low alarm or high/low warning."
::= { portOpticalMonitoringInfoEntry 3 }
portOpticalMonitoringInfoTxBiasCurrent OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Tx Bias Current. It is measured in mA. If the device
supports ALARM WARNING TRAP, then followed by whether
the measured value is normal, high/low alarm or
high/low warning."
::= { portOpticalMonitoringInfoEntry 4 }
portOpticalMonitoringInfoTxPower OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object holds the value of the transmitter optical
signal power for the interface, measured in dBm. If the
device supports ALARM WARNING TRAP, then followed by
whether the measured value is normal, high/low alarm
or high/low warning."
::= { portOpticalMonitoringInfoEntry 5 }
portOpticalMonitoringInfoRxPower OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object holds the value of the receiver optical
signal power for the interface, measured in dBm. If
the device support ALARM WARNING TRAP, then followed
by whether the measured value is normal, high/low alarm
or high/low warning."
::= { portOpticalMonitoringInfoEntry 6 }
--
-- trunkMgt
--
-- Trunks: Provides additional information for Trunks
trunkMaxId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number for a trunk identifier."
::= { trunkMgt 1 }
trunkValidNumber OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid trunks."
::= { trunkMgt 2 }
trunkTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table describing the configuration and status of each
trunk."
::= { trunkMgt 3 }
trunkEntry OBJECT-TYPE
SYNTAX TrunkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry describing the configuration and status of a
particular trunk."
INDEX { trunkIndex }
::= { trunkTable 1 }
TrunkEntry ::= SEQUENCE
{
trunkIndex Integer32,
trunkPorts PortList,
trunkCreation INTEGER,
trunkStatus ValidStatus
}
trunkIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Identifies the trunk within the switch that is
described by the table entry."
::= { trunkEntry 1 }
trunkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The complete set of ports currently associated with
this trunk."
::= { trunkEntry 2 }
trunkCreation OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
lacp(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk."
::= { trunkEntry 3 }
trunkStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured."
::= { trunkEntry 4 }
trunkBalanceMode OBJECT-TYPE
SYNTAX INTEGER
{
macSrc(1),
macDst(2),
macSrcDst(3),
ipSrc(4),
ipDst(5),
ipSrcDst(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This defines the load balancing mode of trunks
in the system. It may be based on source and/or
destination MAC address or IP address.
macSrc(1) means source MAC address.
macDst(2) means destination MAC address.
macSrcDst(3) means source and destination MAC address.
ipSrc(4) means source IP address.
ipDst(5) means destination IP address.
ipSrcDst(6) means source and destination IP address."
::= { trunkMgt 4 }
--
-- lacpMgt
--
-- Management for Link Aggregation Control Protocol (LACP, 802.3ad),
-- that is dynamic trunking.
lacpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LacpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for LACP port configuration."
::= { lacpMgt 1 }
lacpPortEntry OBJECT-TYPE
SYNTAX LacpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure."
INDEX { lacpPortIndex }
::= { lacpPortTable 1 }
LacpPortEntry ::= SEQUENCE
{
lacpPortIndex Integer32,
lacpPortStatus EnabledStatus
}
lacpPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the lacpPortTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB."
::= { lacpPortEntry 1 }
lacpPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether 802.3ad LACP is enabled."
::= { lacpPortEntry 2 }
--
-- staMgt
--
-- Management for Spanning Tree Algorithm (STA).
-- This has variables not already defined in the implemented
-- standard MIB(s).
staSystemStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Global spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled."
DEFVAL { enabled }
::= { staMgt 1 }
staPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table manages port settings for Spanning Tree
Protocol 802.1d, 802.1w or 802.1s depending on the
value specified by staProtocolType."
REFERENCE "IEEE 802.1d, IEEE 802.1w, IEEE 802.1s."
::= { staMgt 2 }
staPortEntry OBJECT-TYPE
SYNTAX StaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual entry of staPortTable."
AUGMENTS { dot1dStpPortEntry }
::= { staPortTable 1 }
StaPortEntry ::= SEQUENCE
{
-- for MST, RSTP
staPortProtocolMigration TruthValue,
staPortOperEdgePort TruthValue,
staPortAdminPointToPoint INTEGER,
staPortOperPointToPoint TruthValue,
staPortSystemStatus EnabledStatus,
staPortLongAdminPathCost Integer32,
staPortLongOperPathCost Integer32,
staPortBpduFlooding EnabledStatus,
staPortBpduGuard EnabledStatus,
staPortAdminEdgePortWithAuto INTEGER,
staPortBpduFilter EnabledStatus,
staPortRootGuardStatus EnabledStatus,
staPortBpduGuardAutoRecovery EnabledStatus,
staPortBpduGuardAutoRecoveryInterval Unsigned32
}
-- for MST, RSTP
staPortProtocolMigration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read."
REFERENCE
"IEEE 802.1w clause 14.8.2.4, 17.18.10, 17.26"
::= { staPortEntry 3 }
staPortOperEdgePort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.4"
::= { staPortEntry 5 }
staPortAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER
{
forceTrue(0),
forceFalse(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of forceFalse(1) indicates
that this port should be treated as having a shared media
connection. A value of auto(2) indicates that this port is
considered to have a point-to-point link if it is an Aggregator
and all of its members are aggregatable, or if the MAC entity
is configured for full duplex operation, either through
auto-negotiation or by management means."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { staPortEntry 6 }
staPortOperPointToPoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-detection,
as described in the staPortAdminPointToPoint object."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
::= { staPortEntry 7 }
staPortSystemStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled."
DEFVAL { enabled }
::= { staPortEntry 9 }
staPortLongAdminPathCost OBJECT-TYPE
SYNTAX Integer32(0..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The admin value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in the 32-bit value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated.
Setting this to 0 means that the path cost is automatically
determined. In this case, read staPortLongOperPathCost to get
the oper value."
::= { staPortEntry 10 }
staPortLongOperPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The oper value of the RSTP path cost or MST external pathcost.
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.
This object is used to configure the spanning tree port
path cost in the 32-bit value range when the
staPathCostMethod is long(2).
If the staPathCostMethod is short(1), this mib object is not
instantiated."
::= { staPortEntry 11 }
-- BPUD flooding can be configured per port when spanning tree is disable
staPortBpduFlooding OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to configure the capability of BPDUs
flooding."
::= { staPortEntry 12 }
staPortBpduGuard OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A value of enabled(1) indicates that BPDU port guard feature
is enabled for each port. A value of disabled(2) indicates
that the feature is disabled."
::= { staPortEntry 15 }
staPortAdminEdgePortWithAuto OBJECT-TYPE
SYNTAX INTEGER
{
true(1),
false(2),
auto(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The administrative value of the edge port parameter.
A value of enable(1) indicates that this port should be
assumed as an edge-port, a value of disable(2) indicates
that this port should be assumed as a non-edge-port and
a value of auot (3) indicates this port in RSPT or MSTP mode
should be assumed as an edge-port after migration or max age expire
without receiving any BPDU and sending BPDU with proposal flag on."
::= { staPortEntry 16 }
staPortBpduFilter OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The administrative value of the BPDU filter parameter.
A value of enabled(1) indicates that this port will avoid
transmitting BPDUs on edge-port and the value of disabled(2)
indicates that this port will not avoid transmitting BPDUs
on edge-port."
::= { staPortEntry 17 }
staPortRootGuardStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the desired status of the root guard. This variable
configures the root guard feature to enforce the root bridge
placement in the network."
::= { staPortEntry 18 }
staPortBpduGuardAutoRecovery OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A value of enabled(1) indicates that BPDU port guard auto
recovery mechanism is enabled for this port. A value of
disabled(2) indicates that the mechanism is disabled."
::= { staPortEntry 19 }
staPortBpduGuardAutoRecoveryInterval OBJECT-TYPE
SYNTAX Unsigned32(30..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval in seconds used by BPDU guard auto recovery
mechanism."
::= { staPortEntry 20 }
staProtocolType OBJECT-TYPE
SYNTAX INTEGER {
stp(1),
rstp(2),
mstp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The version of Spanning Tree Protocol the bridge is currently
running. The value 'stp(1)' indicates the Spanning Tree
Protocol is as specified in IEEE 802.1D,'rstp(2)' indicates that
the Rapid Spanning Tree Protocol is as specified in IEEE
802.1w, and the value 'mstp(3)' indicates that the Multiple Spanning
Tree Protocol is as specified in IEEE 802.1s. New values may
be defined in the future as new or updated versions of the
protocol become available."
REFERENCE
"IEEE 802.1w clause 14.8.1, 17.12, 17.16.1"
::= { staMgt 3 }
staTxHoldCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by the Port Transmit state machine to limit
the maximum transmission rate."
REFERENCE
"IEEE 802.1w clause 17.16.6"
DEFVAL { 3 }
::= { staMgt 4 }
staPathCostMethod OBJECT-TYPE
SYNTAX StaPathCostMode
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the type of spanning tree path cost mode configured
on the switch. This mode applies to all instances of the
spanning tree protocol running on the switch.
When the value of this MIB object is changed, the path cost of
all ports will be reassigned to the default path cost values
based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2), the
staPortLongPathCost MIB object must be used to retrieve/configure
the spanning tree port path cost as a 32-bit value.
The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected.
While retrieving the value of dot1dStpPortPathCost, the maximum
value of 65535 will be returned if the value of staPortLongPathCost
for the same instance exceeds 65535.
When the value of this MIB object is set to short(1), the
dot1dStpPortPathCost in BRIDGE-MIB must be used."
DEFVAL { short }
::= { staMgt 5}
-- for 1s(MSTP) start
--
-- xstMgt
--
xstMgt OBJECT IDENTIFIER ::= { staMgt 6}
mstName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the Multiple Spanning Tree region."
::= { xstMgt 1 }
mstRevision OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Revision number of the Multiple Spanning Tree region."
::= { xstMgt 2 }
mstMaxHops OBJECT-TYPE
SYNTAX Integer32(1..40)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The max hop number counts of the Multiple Spanning Tree region."
::= { xstMgt 3 }
xstInstanceCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF XstInstanceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0."
::= { xstMgt 4 }
xstInstanceCfgEntry OBJECT-TYPE
SYNTAX XstInstanceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the property of the RST or MST instance."
INDEX { xstInstanceCfgIndex }
::= { xstInstanceCfgTable 1 }
XstInstanceCfgEntry ::= SEQUENCE
{
xstInstanceCfgIndex Integer32,
xstInstanceCfgPriority Integer32,
xstInstanceCfgTimeSinceTopologyChange TimeTicks,
xstInstanceCfgTopChanges Integer32,
xstInstanceCfgDesignatedRoot BridgeId,
xstInstanceCfgRootCost Integer32,
xstInstanceCfgRootPort Integer32,
xstInstanceCfgMaxAge Timeout,
xstInstanceCfgHelloTime Timeout,
xstInstanceCfgHoldTime Timeout,
xstInstanceCfgForwardDelay Timeout,
xstInstanceCfgBridgeMaxAge Timeout,
xstInstanceCfgBridgeHelloTime Timeout,
xstInstanceCfgBridgeForwardDelay Timeout,
xstInstanceCfgTxHoldCount Integer32,
xstInstanceCfgPathCostMethod StaPathCostMode
}
xstInstanceCfgIndex OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {xstInstanceCfgEntry 1 }
xstInstanceCfgPriority OBJECT-TYPE
SYNTAX Integer32 (0..61440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096."
::= { xstInstanceCfgEntry 2 }
xstInstanceCfgTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST."
::= { xstInstanceCfgEntry 3 }
xstInstanceCfgTopChanges OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized."
::= { xstInstanceCfgEntry 4 }
xstInstanceCfgDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this node.
This value is used as the root identifier parameter in
all configuration bridge PDUs originated by this node."
REFERENCE "IEEE 802.1w."
::= { xstInstanceCfgEntry 5 }
xstInstanceCfgRootCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The cost of the path to the root as seen from
this bridge of the RST or MST."
::= { xstInstanceCfgEntry 6 }
xstInstanceCfgRootPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST."
::= { xstInstanceCfgEntry 7 }
xstInstanceCfgMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,
in units of hundredths of a second. This is the actual
value that this bridge is currently using."
::= { xstInstanceCfgEntry 8 }
xstInstanceCfgHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual value that this bridge is
currently using in RST or MST."
::= { xstInstanceCfgEntry 9 }
xstInstanceCfgHoldTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second."
::= { xstInstanceCfgEntry 10 }
xstInstanceCfgForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state. The value determines how long the port
stays in each of the listening and learning
states, which precede the forwarding state. This
value is also used, when a topology change has
been detected and is underway, to age all dynamic
entries in the forwarding database. This value is the
current value being used by the bridge.
xstInstanceCfgBridgeForwardDelay defines the value that
this bridge and all others would start using
if/when this bridge were to become the root."
::= { xstInstanceCfgEntry 11 }
xstInstanceCfgBridgeMaxAge OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the value of
xstInstanceCfgBridgeHelloTime. The granularity of this
timer is specified by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 12 }
xstInstanceCfgBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 13 }
xstInstanceCfgBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related to the value of
xstInstanceCfgBridgeMaxAge. The granularity of this
timer is specified by 802.1D-1990 to be 1 second."
REFERENCE "802.1D-1990."
::= { xstInstanceCfgEntry 14 }
xstInstanceCfgTxHoldCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "For RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate."
::= { xstInstanceCfgEntry 15 }
xstInstanceCfgPathCostMethod OBJECT-TYPE
SYNTAX StaPathCostMode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.
When the value of this MIB object is changed, the path cost
of all ports will be reassigned to the default path cost
values based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2),
the xstInstancePortPathCost MIB object must be used in order
to retrieve/configure the spanning tree port path cost as a
32-bit value. The set operation on dot1dStpPortPathCost in
BRIDGE-MIB will be rejected. While retrieving the value of
dot1dStpPortPathCost, the maximum value of 65535 will be
returned if the value of xstInstancePortPathCost for the same
instance exceeds 65535.
When the value of this MIB object is set to short(1),
the dot1dStpPortPathCost in BRIDGE-MIB must be used."
::= { xstInstanceCfgEntry 16 }
xstInstancePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF XstInstancePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration."
::= { xstMgt 5 }
xstInstancePortEntry OBJECT-TYPE
SYNTAX XstInstancePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for xstInstancePortTable."
INDEX { xstInstanceCfgIndex, dot1dStpPort }
::= { xstInstancePortTable 1 }
XstInstancePortEntry ::= SEQUENCE
{
xstInstancePortPriority Integer32,
xstInstancePortState INTEGER,
xstInstancePortEnable EnabledStatus,
xstInstancePortDesignatedRoot BridgeId,
xstInstancePortDesignatedCost Integer32,
xstInstancePortDesignatedBridge BridgeId,
xstInstancePortDesignatedPort OCTET STRING,
xstInstancePortForwardTransitions Counter32,
xstInstancePortPortRole INTEGER,
xstInstancePortAdminPathCost Integer32,
xstInstancePortOperPathCost Integer32
}
xstInstancePortPriority OBJECT-TYPE
SYNTAX Integer32(0..240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active link
in the Spanning Tree. This makes a port with higher
priority less likely to be blocked if the Spanning Tree
Algorithm is detecting network loops. Where more than one
port is assigned the highest priority, the port with
lowest numeric identifier will be enabled."
::= { xstInstancePortEntry 3 }
xstInstancePortState OBJECT-TYPE
SYNTAX INTEGER {
discarding(1),
learning(2),
forwarding(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
but does not forward packets.
learning(2): Port has transmitted configuration messages
for an interval set by the Forward Delay
parameter without receiving contradictory
information. Port address table is cleared,
and the port begins learning addresses.
forwarding(3): Port forwards packets, and continues learning
addresses.
For ports which are disabled (see xstInstancePortEnable),
this object will have a value of discarding(1)."
::= { xstInstancePortEntry 4}
xstInstancePortEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The enabled/disabled status of the port."
::= { xstInstancePortEntry 5 }
xstInstancePortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The unique bridge identifier of the bridge
recorded as the root in the configuration BPDUs
transmitted by the designated bridge for the
segment to which the port is attached."
::= { xstInstancePortEntry 7 }
xstInstancePortDesignatedCost OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The path cost of the designated port of the
segment connected to this port. This value is
compared to the root path cost field in received
bridge PDUs."
::= { xstInstancePortEntry 8 }
xstInstancePortDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bridge identifier of the bridge which this
port considers to be the designated bridge for
this port's segment."
::= { xstInstancePortEntry 9 }
xstInstancePortDesignatedPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of the port on the designated
bridge for this port's segment."
::= { xstInstancePortEntry 10 }
xstInstancePortForwardTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times this port has transitioned
from the learning state to the forwarding state."
::= { xstInstancePortEntry 11 }
xstInstancePortPortRole OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
root(2),
designated(3),
alternate(4),
backup(5),
master(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port is connecting a LAN through the bridge to the
root bridge (i.e., designated port)
(4) The port may provide connectivity if other
bridges, bridge ports, or LANs fail or are removed.
(5) The port provides backup if other
bridges, bridge ports, or LANs fail or are removed.
(6) For MST protocol only, indicates whether this instance
is in a master role."
::= { xstInstancePortEntry 12 }
xstInstancePortAdminPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The admin value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values assigned
to ports with slower media. (Path cost takes precedence
over port priority)."
::= { xstInstancePortEntry 13 }
xstInstancePortOperPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The oper value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values assigned
to ports with slower media. (Path cost takes precedence
over port priority)."
::= { xstInstancePortEntry 14 }
mstInstanceEditTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstInstanceEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The Multiple Spanning Tree region instance vlan configuration table.
Please read the actual instance vlan mapped in the mstInstanceOperTable."
::= { xstMgt 6 }
mstInstanceEditEntry OBJECT-TYPE
SYNTAX MstInstanceEditEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceEditIndex }
::= { mstInstanceEditTable 1 }
MstInstanceEditEntry ::= SEQUENCE
{
mstInstanceEditIndex Integer32,
mstInstanceEditVlansMap OCTET STRING,
mstInstanceEditVlansMap2k OCTET STRING,
mstInstanceEditVlansMap3k OCTET STRING,
mstInstanceEditVlansMap4k OCTET STRING,
mstInstanceEditRemainingHops Integer32
}
mstInstanceEditIndex OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {mstInstanceEditEntry 1 }
mstInstanceEditVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds to the lowest value vlanIndex in that octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 2 }
mstInstanceEditVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 3 }
mstInstanceEditVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 4 }
mstInstanceEditVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'.
To create a row, write any of mstInstanceEditVlansMap,
mstInstanceEditVlansMap2k, mstInstanceEditVlansMap3k or
mstInstanceEditVlansMap4k, to a non-empty list.
To destroy a row, write all of these four variables
to an empty list."
::= {mstInstanceEditEntry 5 }
mstInstanceEditRemainingHops OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remaining hop count for this MST instance."
::= { mstInstanceEditEntry 6 }
--mstInstanceOperTable
mstInstanceOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF MstInstanceOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The Multiple Spanning Tree region instance vlan mapped table."
::= { xstMgt 7 }
mstInstanceOperEntry OBJECT-TYPE
SYNTAX MstInstanceOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the status of the MSTP instance."
INDEX { mstInstanceOperIndex }
::= { mstInstanceOperTable 1 }
MstInstanceOperEntry ::= SEQUENCE
{
mstInstanceOperIndex Integer32,
mstInstanceOperVlansMap OCTET STRING,
mstInstanceOperVlansMap2k OCTET STRING,
mstInstanceOperVlansMap3k OCTET STRING,
mstInstanceOperVlansMap4k OCTET STRING
}
mstInstanceOperIndex OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance."
::= {mstInstanceOperEntry 1 }
mstInstanceOperVlansMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds to the lowest value vlanIndex in that octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 2 }
mstInstanceOperVlansMap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
through 1039; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 3 }
mstInstanceOperVlansMap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 4 }
mstInstanceOperVlansMap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
through 3087; etc. The most significant bit of each
octet corresponds to the lowest value vlanIndex in that
octet.
For each VLAN, if it is mapped to this MSTP instance,
then the bit corresponding to that VLAN is set to '1'."
::= {mstInstanceOperEntry 5 }
-- for 1s(MSTP) end
staLoopbackDetectionPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF StaLoopbackDetectionPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table provides the mechanism to configure the
spanning tree loopback detection of each port or trunk"
::= { staMgt 8 }
staLoopbackDetectionPortEntry OBJECT-TYPE
SYNTAX StaLoopbackDetectionPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of staLoopbackDetectionPortTable."
INDEX { staLoopbackDetectionPortIfIndex}
::= { staLoopbackDetectionPortTable 1 }
StaLoopbackDetectionPortEntry ::= SEQUENCE
{
staLoopbackDetectionPortIfIndex InterfaceIndex,
staLoopbackDetectionPortStatus EnabledStatus,
staLoopbackDetectionPortTrapStatus EnabledStatus,
staLoopbackDetectionPortReleaseMode INTEGER,
staLoopbackDetectionPortRelease INTEGER
}
staLoopbackDetectionPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk interfaces of the portTable. The interface
identified by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { staLoopbackDetectionPortEntry 1 }
staLoopbackDetectionPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Status of the port on whether spanning tree loopback detection is enabled."
::= { staLoopbackDetectionPortEntry 2 }
staLoopbackDetectionPortTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the loopback BPDUs have been detected."
::= { staLoopbackDetectionPortEntry 3 }
staLoopbackDetectionPortReleaseMode OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
manual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting it to auto(1) indicates that this port can be released
from discarding state automatically after loopback has occurred.
Setting it to manual(2) indicates that this port can be released
from discarding state manually after loopback has occurred."
::= { staLoopbackDetectionPortEntry 4 }
staLoopbackDetectionPortRelease OBJECT-TYPE
SYNTAX INTEGER
{
noRelease(1),
release(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this to release(2) to release the port from discarding state.
noRelease(1) will always be obtained when reading this variable."
::= { staLoopbackDetectionPortEntry 5 }
staSystemBPDUFlooding OBJECT-TYPE
SYNTAX INTEGER
{
to-vlan(1),
to-all(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Global BPDU flooding behavior configuration.
When BPDU is received on spanning tree disabled port.
(1) BPDU is flooded to all other spanning tree disabled ports in vlan that received BPDU.
(2) BPDU is flooded to all other spanning tree disabled ports."
DEFVAL { to-vlan }
::= { staMgt 9 }
--
-- restartMgt
--
-- Management for restarting the switch.
restartOpCodeFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of op-code file for start-up."
::= { restartMgt 1 }
restartConfigFile OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Name of configuration file for start-up."
::= { restartMgt 2 }
restartControl OBJECT-TYPE
SYNTAX INTEGER {
running(1),
warmBoot(2),
coldBoot(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to warmBoot(2) causes the device to
reinitialize itself such that neither the agent configuration
nor the protocol entity implementation is altered. Setting this
object to coldBoot(3) causes the device to reinitialize itself such
that the agent's configuration or the protocol entity implementation
may be altered. When the device is running normally, this
variable has a value of running(1)."
::= { restartMgt 3 }
-- resetButtonMgt
resetButton OBJECT IDENTIFIER ::= { restartMgt 4 }
resetButtonResetFactoryDefaultStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The reset button reset to factory default configuration
function status."
::= { resetButton 1 }
--
-- mirrorMgt
--
-- Management for port mirroring.
mirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF MirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports can be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports."
::= { mirrorMgt 1 }
mirrorEntry OBJECT-TYPE
SYNTAX MirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of mirrorTable."
INDEX { mirrorDestinationPort, mirrorSourcePort }
::= { mirrorTable 1 }
MirrorEntry ::= SEQUENCE
{
mirrorDestinationPort Integer32,
mirrorSourcePort Integer32,
mirrorType INTEGER,
mirrorStatus ValidStatus
}
mirrorDestinationPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= { mirrorEntry 1 }
mirrorSourcePort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The source port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= { mirrorEntry 2 }
mirrorType OBJECT-TYPE
SYNTAX INTEGER
{
rx(1),
tx(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If this value is rx(1), receive packets will
be mirrored. If this value is tx(2), transmit
packets will be mirrored. If this value is both(3),
both receive and transmit packets will be mirrored."
::= { mirrorEntry 3 }
mirrorStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { mirrorEntry 4 }
vlanMirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanMirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for VLAN mirroring, enabling a VLAN to be mirrored
to a port."
::= { mirrorMgt 2 }
vlanMirrorEntry OBJECT-TYPE
SYNTAX VlanMirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of vlanMirrorTable."
INDEX { vlanMirrorDestinationPort, vlanMirrorSourceVlan }
::= { vlanMirrorTable 1 }
VlanMirrorEntry ::= SEQUENCE
{
vlanMirrorDestinationPort Integer32,
vlanMirrorSourceVlan Integer32,
vlanMirrorStatus ValidStatus
}
vlanMirrorDestinationPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= { vlanMirrorEntry 1 }
vlanMirrorSourceVlan OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The source VLAN for mirrored packets. The interface
identified by a particular value of this index is the same
interface as identified by the same value of dot1qVlanIndex
in the Q-BRIDGE-MIB."
::= { vlanMirrorEntry 2 }
vlanMirrorStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry."
::= { vlanMirrorEntry 4 }
--
-- rspanMgt
--
rspanTable OBJECT-TYPE
SYNTAX SEQUENCE OF RspanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains the settings of RSPAN."
::= { mirrorMgt 3 }
rspanEntry OBJECT-TYPE
SYNTAX RspanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of rspanTable."
INDEX { rspanSessionId }
::= { rspanTable 1 }
RspanEntry ::= SEQUENCE
{
rspanSessionId Integer32,
rspanSrcTxPorts PortList,
rspanSrcRxPorts PortList,
rspanDstPort Integer32,
rspanDstPortTag INTEGER,
rspanSwitchRole INTEGER,
rspanRemotePorts PortList,
rspanRemoteVlanId Integer32,
rspanOperStatus INTEGER,
rspanStatus ValidStatus
}
rspanSessionId OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The session ID that may specify an entry in the table which
contains destination port(s) information."
::= { rspanEntry 1 }
rspanSrcTxPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the source port list in tx mode."
::= { rspanEntry 2 }
rspanSrcRxPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the source port list in rx mode."
::= { rspanEntry 3 }
rspanDstPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The port number of a destination port. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB."
::= { rspanEntry 4 }
rspanDstPortTag OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
untagged(2),
tagged(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the traffic which is sent out from source port
with RSPAN VLAN ID or not."
::= { rspanEntry 5 }
rspanSwitchRole OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
source(2),
intermediate(3),
destination(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the role of current switch."
::= { rspanEntry 6 }
rspanRemotePorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the uplink port list."
::= { rspanEntry 7 }
rspanRemoteVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the ID of a RSPAN VLAN."
::= { rspanEntry 8 }
rspanOperStatus OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational status of the entry. A status of up(1)
means the setting of a session is complete and it has
started performing its function. A status of down(2) means
no function is performed because of incompleted session
setting."
::= { rspanEntry 9 }
rspanStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry."
::= { rspanEntry 10 }
macMirrorTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacMirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for MAC mirroring, enabling a MAC address to be
mirrored to a port."
::= { mirrorMgt 4 }
macMirrorEntry OBJECT-TYPE
SYNTAX MacMirrorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of mirrorMacTable."
INDEX { macMirrorDestinationPort, macMirrorSourceMacAddr }
::= { macMirrorTable 1 }
MacMirrorEntry ::= SEQUENCE
{
macMirrorDestinationPort Integer32,
macMirrorSourceMacAddr MacAddress,
macMirrorStatus ValidStatus
}
macMirrorDestinationPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The destination port interface for mirrored packets.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= { macMirrorEntry 1 }
macMirrorSourceMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Packets with matching source MAC address will be
monitored."
::= { macMirrorEntry 2 }
macMirrorStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { macMirrorEntry 3 }
--
-- igmpSnoopMgt
--
-- Management for Internet Group Management Protocol (IGMP)
-- Snooping.
igmpSnoopStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping on the device.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports. "
DEFVAL { enabled }
::= { igmpSnoopMgt 1 }
igmpSnoopQuerier OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables (disables) whether the switch acts as an IGMP
querier."
DEFVAL { enabled }
::= { igmpSnoopMgt 2 }
igmpSnoopRouterPortExpireTime OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires."
DEFVAL { 300 }
::= { igmpSnoopMgt 6 }
igmpSnoopVersion OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "IGMP version snooped"
DEFVAL { 2 }
::= { igmpSnoopMgt 7 }
igmpSnoopRouterCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopRouterCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for current router ports."
::= { igmpSnoopMgt 8 }
igmpSnoopRouterCurrentEntry OBJECT-TYPE
SYNTAX IgmpSnoopRouterCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for current router ports."
INDEX { igmpSnoopRouterCurrentVlanIndex }
::= {
igmpSnoopRouterCurrentTable 1 }
IgmpSnoopRouterCurrentEntry ::=
SEQUENCE {
igmpSnoopRouterCurrentVlanIndex
Unsigned32,
igmpSnoopRouterCurrentPorts
PortList,
igmpSnoopRouterCurrentStatus
PortList
}
igmpSnoopRouterCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRouterStaticTable."
::= { igmpSnoopRouterCurrentEntry 1 }
igmpSnoopRouterCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The set of ports which are current router ports, including static
router ports. Please refer to igmpSnoopRouterStaticTable."
::= { igmpSnoopRouterCurrentEntry 2 }
igmpSnoopRouterCurrentStatus OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are static router ports."
::= { igmpSnoopRouterCurrentEntry 3 }
igmpSnoopRouterStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopRouterStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for static router ports."
::= { igmpSnoopMgt 9 }
igmpSnoopRouterStaticEntry OBJECT-TYPE
SYNTAX IgmpSnoopRouterStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for static router ports."
INDEX { igmpSnoopRouterStaticVlanIndex }
::= {
igmpSnoopRouterStaticTable 1 }
IgmpSnoopRouterStaticEntry ::=
SEQUENCE {
igmpSnoopRouterStaticVlanIndex
Unsigned32,
igmpSnoopRouterStaticPorts
PortList,
igmpSnoopRouterStaticStatus
ValidStatus
}
igmpSnoopRouterStaticVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopRouterStaticTable."
::= { igmpSnoopRouterStaticEntry 1 }
igmpSnoopRouterStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are static router ports."
::= { igmpSnoopRouterStaticEntry 2 }
igmpSnoopRouterStaticStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { igmpSnoopRouterStaticEntry 3 }
igmpSnoopMulticastCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopMulticastCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for current multicast addresses."
::= { igmpSnoopMgt 10 }
igmpSnoopMulticastCurrentEntry OBJECT-TYPE
SYNTAX IgmpSnoopMulticastCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for current multicast addresses."
INDEX { igmpSnoopMulticastCurrentVlanIndex,
igmpSnoopMulticastCurrentIpAddress }
::= {
igmpSnoopMulticastCurrentTable 1 }
IgmpSnoopMulticastCurrentEntry ::=
SEQUENCE {
igmpSnoopMulticastCurrentVlanIndex
Unsigned32,
igmpSnoopMulticastCurrentIpAddress
IpAddress,
igmpSnoopMulticastCurrentPorts
PortList,
igmpSnoopMulticastCurrentStatus
PortList
}
igmpSnoopMulticastCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastCurrentEntry 1 }
igmpSnoopMulticastCurrentIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of multicast group."
::= { igmpSnoopMulticastCurrentEntry 2 }
igmpSnoopMulticastCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are members of a multicast group, including
static members. Please refer to igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastCurrentEntry 3 }
igmpSnoopMulticastCurrentStatus OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are static members."
::= { igmpSnoopMulticastCurrentEntry 4 }
igmpSnoopMulticastStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopMulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for static multicast addresses."
::= { igmpSnoopMgt 11 }
igmpSnoopMulticastStaticEntry OBJECT-TYPE
SYNTAX IgmpSnoopMulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for static multicast addresses."
INDEX { igmpSnoopMulticastStaticVlanIndex,
igmpSnoopMulticastStaticIpAddress }
::= {
igmpSnoopMulticastStaticTable 1 }
IgmpSnoopMulticastStaticEntry ::=
SEQUENCE {
igmpSnoopMulticastStaticVlanIndex
Unsigned32,
igmpSnoopMulticastStaticIpAddress
IpAddress,
igmpSnoopMulticastStaticPorts
PortList,
igmpSnoopMulticastStaticStatus
ValidStatus
}
igmpSnoopMulticastStaticVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastStaticEntry 1 }
igmpSnoopMulticastStaticIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of multicast group."
::= { igmpSnoopMulticastStaticEntry 2 }
igmpSnoopMulticastStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of ports which are members."
::= { igmpSnoopMulticastStaticEntry 3 }
igmpSnoopMulticastStaticStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { igmpSnoopMulticastStaticEntry 4 }
igmpSnoopCurrentVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopCurrentVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for enabling or disabling IGMP snooping per VLAN."
::= { igmpSnoopMgt 14 }
igmpSnoopCurrentVlanEntry OBJECT-TYPE
SYNTAX IgmpSnoopCurrentVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for enabling or disabling IGMP snooping."
INDEX { igmpSnoopCurrentVlanIndex }
::= { igmpSnoopCurrentVlanTable 1 }
IgmpSnoopCurrentVlanEntry ::= SEQUENCE
{
igmpSnoopCurrentVlanIndex Unsigned32,
igmpSnoopCurrentVlanStatus EnabledStatus,
igmpSnoopCurrentVlanImmediateLeave EnabledStatus,
igmpSnoopCurrentVlanGeneralQuerySuppression EnabledStatus,
igmpSnoopCurrentVlanLastMemQueryCount Unsigned32,
igmpSnoopCurrentVlanLastMemQueryIntvl Unsigned32,
igmpSnoopCurrentVlanProxyAddress IpAddress,
igmpSnoopCurrentVlanQueryIntvl Unsigned32,
igmpSnoopCurrentVlanQueryRespIntvl Unsigned32,
igmpSnoopCurrentVlanProxyReporting INTEGER,
igmpSnoopCurrentVlanVersion Unsigned32,
igmpSnoopCurrentVlanVersionExclusive EnabledStatus
}
igmpSnoopCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface."
::= { igmpSnoopCurrentVlanEntry 1 }
igmpSnoopCurrentVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping on this VLAN.
When enabled, the device will examine IGMP packets and set
up filters for IGMP ports."
::= { igmpSnoopCurrentVlanEntry 2 }
igmpSnoopCurrentVlanImmediateLeave OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter to enable or disable the Immediate-Leave feature on this VLAN."
::= { igmpSnoopCurrentVlanEntry 3 }
igmpSnoopCurrentVlanGeneralQuerySuppression OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter to enable or disable the general query suppresion
on this VLAN."
::= { igmpSnoopCurrentVlanEntry 4 }
igmpSnoopCurrentVlanLastMemQueryCount OBJECT-TYPE
SYNTAX Unsigned32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Represents the number of queries sent by the switch before
it assumes there are no local members."
::= { igmpSnoopCurrentVlanEntry 5 }
igmpSnoopCurrentVlanLastMemQueryIntvl OBJECT-TYPE
SYNTAX Unsigned32(1..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The last member query interval is the max response time
inserted into group-specific queries sent in response to
leave group messages,and is also the the max response time
inserted into group-and-source-specific query messages."
::= { igmpSnoopCurrentVlanEntry 6 }
igmpSnoopCurrentVlanProxyAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Represents the address of queries sent by the switch."
::= { igmpSnoopCurrentVlanEntry 7 }
igmpSnoopCurrentVlanQueryIntvl OBJECT-TYPE
SYNTAX Unsigned32(2..31744)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Represents the query interval of queries sent by the switch."
::= { igmpSnoopCurrentVlanEntry 8 }
igmpSnoopCurrentVlanQueryRespIntvl OBJECT-TYPE
SYNTAX Unsigned32(10..31740)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Represents the query response interval of queries
sent by the switch."
::= { igmpSnoopCurrentVlanEntry 9 }
igmpSnoopCurrentVlanProxyReporting OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
default(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to enabled(1) to enable the feature.
Set this variable to disabled(2) to disable the feature.
Set this variable to default(3), the status of the feature
is decided by the global configuration."
::= { igmpSnoopCurrentVlanEntry 10 }
igmpSnoopCurrentVlanVersion OBJECT-TYPE
SYNTAX Unsigned32(1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "the version of igmp packets is supported by this vlan."
::= { igmpSnoopCurrentVlanEntry 11 }
igmpSnoopCurrentVlanVersionExclusive OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enable/disable control of the IGMP Snooping exclusive
supported version."
::= { igmpSnoopCurrentVlanEntry 12 }
igmpSnoopMulticastGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for current multicast addresses."
::= { igmpSnoopMgt 15 }
igmpSnoopMulticastGroupEntry OBJECT-TYPE
SYNTAX IgmpSnoopMulticastGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for Group multicast addresses."
INDEX { igmpSnoopMulticastGroupVlanIndex,
igmpSnoopMulticastGroupIpAddress,
igmpSnoopMulticastGroupSourceIPAddress }
::= {
igmpSnoopMulticastGroupTable 1 }
IgmpSnoopMulticastGroupEntry ::=
SEQUENCE {
igmpSnoopMulticastGroupVlanIndex
Unsigned32,
igmpSnoopMulticastGroupIpAddress
IpAddress,
igmpSnoopMulticastGroupSourceIPAddress
IpAddress,
igmpSnoopMulticastGroupPorts
PortList,
igmpSnoopMulticastGroupStatus
PortList
}
igmpSnoopMulticastGroupVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastGroupEntry 1 }
igmpSnoopMulticastGroupIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IP address of multicast group."
::= { igmpSnoopMulticastGroupEntry 2 }
igmpSnoopMulticastGroupSourceIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Source IP address of source."
::= { igmpSnoopMulticastGroupEntry 3 }
igmpSnoopMulticastGroupPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are members of a multicast group, including
static members. Please refer to igmpSnoopMulticastStaticTable."
::= { igmpSnoopMulticastGroupEntry 4 }
igmpSnoopMulticastGroupStatus OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The set of ports which are static IGMP member ports."
::= { igmpSnoopMulticastGroupEntry 5 }
igmpSnoopFilterStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Parameter to enable or disable IGMP filtering on the device."
::= { igmpSnoopMgt 17 }
igmpSnoopProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the IGMP snooping profile."
::= { igmpSnoopMgt 18 }
igmpSnoopProfileEntry OBJECT-TYPE
SYNTAX IgmpSnoopProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the IGMP snooping profile."
INDEX { igmpSnoopProfileId }
::= { igmpSnoopProfileTable 1 }
IgmpSnoopProfileEntry ::= SEQUENCE
{
igmpSnoopProfileId Unsigned32,
igmpSnoopProfileAction INTEGER,
igmpSnoopProfileStatus ValidStatus
}
igmpSnoopProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ID of the IGMP snooping profile."
::= { igmpSnoopProfileEntry 1 }
igmpSnoopProfileAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The access mode of the IGMP snooping profile."
DEFVAL { deny }
::= { igmpSnoopProfileEntry 2 }
igmpSnoopProfileStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { igmpSnoopProfileEntry 3 }
igmpSnoopProfileCtl OBJECT IDENTIFIER ::= { igmpSnoopMgt 19 }
igmpSnoopProfileCtlId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ID of the IGMP snooping profile. The default value
is zero, meaning that no ID is specified. In order to
create a profile, a non-zero value must be specified."
::= { igmpSnoopProfileCtl 1 }
igmpSnoopProfileCtlInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The address type is associated with this agent.
Only ipv4(1) type is supported."
::= { igmpSnoopProfileCtl 2 }
igmpSnoopProfileCtlStartInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The specified addresses in the start of the controlled
IP multicast addresses."
::= { igmpSnoopProfileCtl 3 }
igmpSnoopProfileCtlEndInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The specified addresses in the end of the controlled
IP multicast addresses."
::= { igmpSnoopProfileCtl 4 }
igmpSnoopProfileCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
create(2),
destroy(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting it to create(2) creates the range of the
controlled IP multicast addresses.
Setting it to destroy(3) destroys the range of the
controlled IP multicast addresses.
When the action is completed, this object becomes
noAction(1)."
::= { igmpSnoopProfileCtl 5 }
igmpSnoopProfileRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopProfileRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the range of the IGMP snooping
profile."
::= { igmpSnoopMgt 20 }
igmpSnoopProfileRangeEntry OBJECT-TYPE
SYNTAX IgmpSnoopProfileRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the range of the IGMP snooping
profile."
INDEX { igmpSnoopProfileRangeProfileId,
igmpSnoopProfileRangeInetAddressType,
igmpSnoopProfileRangeStartInetAddress }
::= { igmpSnoopProfileRangeTable 1 }
IgmpSnoopProfileRangeEntry ::= SEQUENCE
{
igmpSnoopProfileRangeProfileId Unsigned32,
igmpSnoopProfileRangeInetAddressType InetAddressType,
igmpSnoopProfileRangeStartInetAddress InetAddress,
igmpSnoopProfileRangeEndInetAddress InetAddress,
igmpSnoopProfileRangeAction INTEGER
}
igmpSnoopProfileRangeProfileId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as igmpSnoopProfileId."
::= { igmpSnoopProfileRangeEntry 1 }
igmpSnoopProfileRangeInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type is associated with this agent.
Only ipv4(1) type is supported."
::= { igmpSnoopProfileRangeEntry 2 }
igmpSnoopProfileRangeStartInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The specified addresses in the start of the controlled
IP multicast addresses."
::= { igmpSnoopProfileRangeEntry 3 }
igmpSnoopProfileRangeEndInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The specified addresses in the end of the controlled
IP multicast addresses."
::= { igmpSnoopProfileRangeEntry 4 }
igmpSnoopProfileRangeAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The access mode of the IGMP snooping profile."
DEFVAL { deny }
::= { igmpSnoopProfileRangeEntry 5 }
igmpSnoopFilterPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in IGMP filtering."
::= { igmpSnoopMgt 21 }
igmpSnoopFilterPortEntry OBJECT-TYPE
SYNTAX IgmpSnoopFilterPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in IGMP filtering."
INDEX { igmpSnoopFilterPortIndex }
::= { igmpSnoopFilterPortTable 1 }
IgmpSnoopFilterPortEntry ::= SEQUENCE
{
igmpSnoopFilterPortIndex Unsigned32,
igmpSnoopFilterPortProfileId Unsigned32
}
igmpSnoopFilterPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB."
::= { igmpSnoopFilterPortEntry 1 }
igmpSnoopFilterPortProfileId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The igmpSnoopProfileEntry identified by a particular value of this index
is the same interface identified by the same value of the igmpSnoopProfileId
object. If there is no corresponding entry in the igmpSnoopProfileTable,
then no association exists. In particular, if this value is zero, no
associated profile will be generated, as zero is not a valid profile index."
::= { igmpSnoopFilterPortEntry 2 }
igmpSnoopThrottlePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopThrottlePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in IGMP throttling."
::= { igmpSnoopMgt 22 }
igmpSnoopThrottlePortEntry OBJECT-TYPE
SYNTAX IgmpSnoopThrottlePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in IGMP throttling."
INDEX { igmpSnoopThrottlePortIndex }
::= { igmpSnoopThrottlePortTable 1 }
IgmpSnoopThrottlePortEntry ::= SEQUENCE
{
igmpSnoopThrottlePortIndex Unsigned32,
igmpSnoopThrottlePortRunningStatus INTEGER,
igmpSnoopThrottlePortAction INTEGER,
igmpSnoopThrottlePortMaxGroups Integer32,
igmpSnoopThrottlePortCurrentGroups Integer32
}
igmpSnoopThrottlePortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface identified by the same
value of ifIndex in the IF-MIB."
::= { igmpSnoopThrottlePortEntry 1 }
igmpSnoopThrottlePortRunningStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes the running status of the IGMP throttling to the switch.
A value of true(1) indicates the IGMP throttling mechanism is active.
A value of false(2) indicates the IGMP throttling mechanism is inactive."
::= { igmpSnoopThrottlePortEntry 2 }
igmpSnoopThrottlePortAction OBJECT-TYPE
SYNTAX INTEGER
{
replace(1),
deny(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The action mode of the IGMP throttling. A value of replace(1)
means to replace a joined multicast group randomly when an interface
receives an IGMP report and the number of current joined multicast groups
is equal to the maximum number of IGMP groups that the interface can join.
A value of deny(2) means to deny the IGMP report request when an interface
receives an IGMP report and the number of current joined multicast groups
is equal to the maximum number of IGMP groups that the interface can join."
DEFVAL { deny }
::= { igmpSnoopThrottlePortEntry 3 }
igmpSnoopThrottlePortMaxGroups OBJECT-TYPE
SYNTAX Integer32(1..1023)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of IGMP groups that the interface can join."
::= { igmpSnoopThrottlePortEntry 4 }
igmpSnoopThrottlePortCurrentGroups OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The current number of IGMP groups that the interface has joined."
::= { igmpSnoopThrottlePortEntry 5}
--
--
--
igmpSnoopPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF IgmpSnoopPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of IGMP Snooping service per port."
::= {igmpSnoopMgt 27 }
igmpSnoopPortEntry OBJECT-TYPE
SYNTAX IgmpSnoopPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry of IGMP Snooping service per port."
INDEX { igmpSnoopPortIndex }
::= {igmpSnoopPortTable 1}
IgmpSnoopPortEntry ::=
SEQUENCE {
igmpSnoopPortIndex Unsigned32,
igmpSnoopQueryDrop EnabledStatus,
igmpSnoopMulticastDataDrop EnabledStatus,
igmpSnoopAuthentication INTEGER
}
igmpSnoopPortIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port and the trunk (excluding trunk members)
interface of the igmpSnoopPortTable. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { igmpSnoopPortEntry 1 }
igmpSnoopQueryDrop OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable dropping IGMP Query packet."
DEFVAL { disable }
::= { igmpSnoopPortEntry 3 }
igmpSnoopAuthentication OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP Authentication "
DEFVAL { disable }
::= { igmpSnoopPortEntry 17 }
igmpSnoopGlobalMgt OBJECT IDENTIFIER ::= { igmpSnoopMgt 28 }
--
-- igmpSnoopGlobalMgt
--
-- Global Management for Internet Group Management Protocol (IGMP)
-- Snooping.
igmpSnoopProxyReporting OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping proxy reporting
on the device."
DEFVAL { enabled }
::= { igmpSnoopGlobalMgt 1 }
igmpSnoopRouterAlertOptionCheck OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping router alert
option check on the device."
DEFVAL { disabled }
::= { igmpSnoopGlobalMgt 2 }
igmpSnoopTcnFlood OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping tcn flood
on the device."
DEFVAL { disabled }
::= { igmpSnoopGlobalMgt 3 }
igmpSnoopTcnQuerySolicit OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping tcn query
solicit on the device."
DEFVAL { disabled }
::= { igmpSnoopGlobalMgt 4 }
igmpSnoopUnregisteredDataFlood OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping Unregistered
data flood solicit on the device."
DEFVAL { disabled }
::= { igmpSnoopGlobalMgt 5 }
igmpSnoopUnsolicitedReportInterval OBJECT-TYPE
SYNTAX Unsigned32(1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this value to specify how long (in seconds) the
uplink ports should transmit unsolicited reports."
DEFVAL { 400 }
::= { igmpSnoopGlobalMgt 6 }
igmpSnoopVersionExclusive OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable IGMP snooping version
exclusive on the device."
DEFVAL { disabled }
::= { igmpSnoopGlobalMgt 7 }
igmpSnoopForwardingPriority OBJECT-TYPE
SYNTAX Integer32(0..6|65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure IGMP snooping multicast stream forwarding priority.
If value is 65535, it means the priority is disabled"
::= { igmpSnoopMgt 29 }
--
-- The IpMgt Group
--
-- Management for Internet Protocol (IP).
netConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of netConfigEntry."
::= { ipMgt 1 }
netConfigEntry OBJECT-TYPE
SYNTAX NetConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.
The index is composed of the ifIndex assigned to the
corresponding interface."
INDEX { netConfigIfIndex, netConfigIPAddress, netConfigSubnetMask }
::= { netConfigTable 1 }
NetConfigEntry ::= SEQUENCE {
netConfigIfIndex Integer32,
netConfigIPAddress IpAddress,
netConfigSubnetMask IpAddress,
netConfigPrimaryInterface INTEGER,
netConfigUnnumbered INTEGER,
netConfigStatus RowStatus
}
netConfigIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The VLAN interface being used by this table entry. Only the
VLAN interfaces which have an IP configured will appear in
the table."
::= { netConfigEntry 1 }
netConfigIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what these
values should be. If BOOTP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."
::= { netConfigEntry 2 }
netConfigSubnetMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The subnet mask of this Net interface. The default value
for this object is 0.0.0.0. If either the netConfigIPAddress
or netConfigSubnetMask are 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what these
values should be. If BOOTP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."
::= { netConfigEntry 3 }
netConfigPrimaryInterface OBJECT-TYPE
SYNTAX INTEGER
{
primary(1),
secondary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether this is a primary interface."
::= { netConfigEntry 4 }
netConfigUnnumbered OBJECT-TYPE
SYNTAX INTEGER
{
unnumbered(1),
notUnnumbered(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether this is an unnumbered interface."
::= { netConfigEntry 5 }
netConfigStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { netConfigEntry 6 }
netDefaultGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Address of the default gateway. If this value is
undefined or unknown, it shall have the value 0.0.0.0."
::= { ipMgt 2 }
ipHttpState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether HTTP is enabled."
::= { ipMgt 3 }
ipHttpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number for HTTP."
::= { ipMgt 4 }
ipDhcpRestart OBJECT-TYPE
SYNTAX INTEGER
{
restart(1),
noRestart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When set to restart(1) the DHCP server will restart. When read,
this value always returns noRestart(2)."
::= { ipMgt 5 }
-- optional
ipHttpsState OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Whether HTTPS is enabled."
::= { ipMgt 6 }
ipHttpsPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port number for HTTPS."
::= { ipMgt 7 }
dhcpMgt OBJECT IDENTIFIER ::= { ipMgt 11 }
dhcpClient OBJECT IDENTIFIER ::= { dhcpMgt 1 }
dhcpOption82 OBJECT IDENTIFIER ::= { dhcpMgt 4 }
dhcpcOptions OBJECT IDENTIFIER ::= { dhcpClient 1 }
dhcpcInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpcInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for DHCP client information listed by interface.
Depending on the nature of the product, this table may
have only one entry(e.g. for the management VLAN), or
may have many entries(e.g. for all ports, or for all
static VLANs)."
::= { dhcpcOptions 1 }
dhcpcInterfaceEntry OBJECT-TYPE
SYNTAX DhcpcInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for DHCP client information listed by interface."
INDEX { dhcpcIfIndex }
::= { dhcpcInterfaceTable 1 }
DhcpcInterfaceEntry ::= SEQUENCE
{
dhcpcIfIndex Integer32,
dhcpcIfClientIdMode INTEGER,
dhcpcIfClientId OCTET STRING
}
dhcpcIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined by ifIndex in the IF-MIB.(static vlan if index)"
::= { dhcpcInterfaceEntry 1 }
dhcpcIfClientIdMode OBJECT-TYPE
SYNTAX INTEGER
{
notSpecify(1),
text(2),
hex(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether the Client ID is in text mode or in Hex mode."
::= { dhcpcInterfaceEntry 2 }
dhcpcIfClientId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value that the DHCP client sets in the client_id
option of DHCPDISCOVER and DHCPREQUEST messages. This
value may be used by DHCP servers to uniquely identify
the client."
::= { dhcpcInterfaceEntry 3 }
--
--pingMgt
--
pingMgt OBJECT IDENTIFIER ::= { ipMgt 15 }
pingIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the IP address of the device that is planned
to ping."
::= { pingMgt 1 }
pingPacketSize OBJECT-TYPE
SYNTAX Integer32 (32..512)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the size of each data potion of ping packets
in bytes."
DEFVAL { 32 }
::= { pingMgt 2 }
pingCompleted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value of true(1) will be read when this ping operation has
been either responded to or changed to the time-out status.
A value of false(2) will be read when there is a ping
operation running and all associated objects in the pingMgt
operation cannot be modified during this period."
::= { pingMgt 4 }
pingAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
pingStart(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The action of the pingMgt operation. Sets these objects to
pingStart(2) to begin the ping operation. Once the action
is set to pingStart(2), the associated pingMgt objects cannot
be modified until this ping operation is completed
(pingCompleted is true). When the ping has ended or there is
no ping operation performing, this object will get a value of
noAction(1)."
::= { pingMgt 5 }
-- ASV3518KO-FLF-02, 2007-01, for CHT
--
pingProbeCount OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the number of times to perform a ping operation at a
remote host."
::= { pingMgt 6 }
-- For CHT
pingSentPackets OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The value of this object reflects the number of probes sent.
The value of this object must be reported as 0 when no probes
have been sent."
::= { pingMgt 7 }
pingReceivedPackets OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of responses received. The value of this object must
be reported as 0 when no probe responses have been received."
::= { pingMgt 8 }
-- For CHT
pingPacketLossRate OBJECT-TYPE
SYNTAX INTEGER(0..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Packet loss rate of this ping operation. This variable is
calculated by pingReceivedPackets and pingSentPackets. The
rate is expressed as a percentage."
::= { pingMgt 9 }
-- For CHT
pingHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF PingHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the executive result information for the ping
operation."
::= { pingMgt 10 }
pingHistoryEntry OBJECT-TYPE
SYNTAX PingHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the pingHistory table."
INDEX { pingHistoryIndex }
::= { pingHistoryTable 1 }
PingHistoryEntry::= SEQUENCE
{
pingHistoryIndex Integer32,
pingHistoryResponse Integer32
}
pingHistoryIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A new entry in this table is created when the result of
a ping probe is determined. The old entries will be cleared
when a new ping action is started."
::= { pingHistoryEntry 1 }
pingHistoryResponse OBJECT-TYPE
SYNTAX Integer32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This variable represents the round trip time and is
measured in milliseconds. The variable is the difference
between received time and sent time for a ping probe. If
the difference value is more than the time-out value or no
response is received, then the variable will be 5000
milliseconds."
::= { pingHistoryEntry 2 }
dhcpOption82Status OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set enabled(1) to enable DHCP Relay Option 82,
set disabled(2) to disable it."
::= { dhcpOption82 1 }
dhcpOption82Policy OBJECT-TYPE
SYNTAX INTEGER
{
drop(1),
replace(2),
keep(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provide three policies to handle packet"
::= { dhcpOption82 2 }
dhcpOption82RemoteIDMode OBJECT-TYPE
SYNTAX INTEGER
{
mac-address-in-hex(1),
mac-address-in-ascii(2),
ip-address-in-hex(3),
ip-address-in-ascii(4),
configured-string(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Provide five mode for insertion remote-id sub-option of option 82.
If configured-string(5) has been set, dhcpOption82RemoteIDString
will take effect."
::= { dhcpOption82 3 }
dhcpOption82RemoteIDString OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set string to remote-id sub-option of option 82.
It only take effect when dhcpOption82RemoteIDMode is set to configured-string(5)"
::= { dhcpOption82 4 }
dhcpOption82EncodeFormat OBJECT-TYPE
SYNTAX INTEGER
{
extra-subtype-included(1),
no-extra-subtype-included(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set encode format for CID and RID in option82.
Set extra-subtype-included(1) will have extra subtype and length field in CID and RID.
Set no-extra-subtype-included(2) will only have TLV format for CID and RID."
::= { dhcpOption82 5 }
dhcpOption82RelayServerAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpOption82RelayServerAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION " This table is to specify relay server IP address,
the maximum number of server IP addresses user can specify is 5.
"
::= { dhcpOption82 6 }
dhcpOption82RelayServerAddrEntry OBJECT-TYPE
SYNTAX DhcpOption82RelayServerAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of dhcpOption82RelayServerAddrTable."
INDEX { dhcpOption82RelayServerAddrIndex }
::= { dhcpOption82RelayServerAddrTable 1 }
DhcpOption82RelayServerAddrEntry ::= SEQUENCE
{
dhcpOption82RelayServerAddrIndex Integer32,
dhcpOption82RelayServerAddrServerIp IpAddress
}
dhcpOption82RelayServerAddrIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of the relay server IP address."
::= { dhcpOption82RelayServerAddrEntry 1 }
dhcpOption82RelayServerAddrServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of the relay server."
::= { dhcpOption82RelayServerAddrEntry 2 }
arpCacheDeleteAll OBJECT-TYPE
SYNTAX INTEGER
{
delete(1),
noDelete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To delete all dynamic entries in the ARP cache,
write this variable to delete(1). Writing this variable
to noDelete(2) has no effect on the device. When
read, this variable always returns noDelete(2). This object
is only for Layer 2 switch."
::= { ipMgt 17 }
---
--- ipCfgMgt
---
ipCfgMgt OBJECT IDENTIFIER ::={ ipMgt 18 }
ipCfgInterfaceVlanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the interface VLAN ID."
::= { ipCfgMgt 1 }
ipCfgInterfaceType OBJECT-TYPE
SYNTAX INTEGER
{
primary(1),
secondary(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "For L3 only. Sets the specified IP interface as primary(1) or
secondary(2)."
::= { ipCfgMgt 2 }
ipCfgInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifices the IP type for ipv4(1) or ipv6(2)."
::= { ipCfgMgt 3 }
ipCfgInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the specified IP address for the device."
::= { ipCfgMgt 4 }
ipCfgInetAddressPrefixLength OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the specified mask for the device."
::= { ipCfgMgt 5 }
ipCfgCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
create(2),
destroy(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for set a IP address . When this object is set
to create(2), the specified IP address is created.
When this object is set to destroy(3), the specified IP
address will be destroyed. When this object is read,
it always has the value of noAction(1). For L2 device, when
object is set to create(2) , the specified IPv4 address
will repleace original specified IPv4 address, when object
is set to destroy, the original specificed IPv4 address
will be cleared."
::= { ipCfgMgt 6 }
--
-- vlanMgt
--
-- Management for Virtual Local Area Network (VLAN).
-- This has variables not already defined in the implemented
-- standard MIB(s).
vlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for VLAN configuration."
::= { vlanMgt 1 }
vlanEntry OBJECT-TYPE
SYNTAX VlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for VLAN configuration."
INDEX { vlanIndex }
::= { vlanTable 1 }
VlanEntry ::= SEQUENCE
{
vlanIndex Unsigned32,
vlanAddressMethod INTEGER
}
vlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Based on dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface."
::= { vlanEntry 1 }
vlanAddressMethod OBJECT-TYPE
SYNTAX INTEGER
{
user(1),
bootp(2),
dhcp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Method to get the IP address."
::= { vlanEntry 2 }
vlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in VLAN."
::= { vlanMgt 2 }
vlanPortEntry OBJECT-TYPE
SYNTAX VlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in VLAN."
INDEX { vlanPortIndex }
::= { vlanPortTable 1 }
VlanPortEntry ::= SEQUENCE
{
vlanPortIndex Integer32,
vlanPortMode INTEGER,
vlanPortPrivateVlanType INTEGER
}
vlanPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of dot1qPvid in the Q-BRIDGE-MIB."
::= { vlanPortEntry 1 }
vlanPortMode OBJECT-TYPE
SYNTAX INTEGER
{
hybrid(1),
dot1qTrunk(2),
access(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to access(3) sets an access link."
::= { vlanPortEntry 2 }
--¡@SYS_CPNT_COMMUNITY_PRIVATE_VLAN¡@(use PVLAN_MGR API) start
vlanPortPrivateVlanType OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
isolated(2),
community(3),
promiscous(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The port type defined for private VLAN."
::= { vlanPortEntry 3 }
-- SYS_CPNT_COMMUNITY_PRIVATE_VLAN (use PVLAN_MGR API) end
vlanDot1qTunnelGlobalConfig OBJECT IDENTIFIER ::= { vlanMgt 8 }
vlanDot1qTunnelStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to globally enable/disable
802.1Q Tunneling on the device."
::= { vlanDot1qTunnelGlobalConfig 1 }
vlanDot1qTunnelPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanDot1qTunnelPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in 802.1Q Tunneling."
::= { vlanMgt 9 }
vlanDot1qTunnelPortEntry OBJECT-TYPE
SYNTAX VlanDot1qTunnelPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in 802.1Q Tunneling."
INDEX { vlanDot1qTunnelPortIndex }
::= { vlanDot1qTunnelPortTable 1 }
VlanDot1qTunnelPortEntry ::= SEQUENCE
{
vlanDot1qTunnelPortIndex Integer32,
vlanDot1qTunnelPortMode INTEGER,
vlanDot1qTunnelPortEtherType Unsigned32
}
vlanDot1qTunnelPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { vlanDot1qTunnelPortEntry 1 }
vlanDot1qTunnelPortMode OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
access(2),
uplink(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable sets the 802.1Q Tunneling mode.
Setting it to none(1) indicates no mode in this port.
Setting it to access(2) sets as dot1q-tunnel mode port which link to customer.
Setting it to uplink(3) sets as dot1q-tunnel mode port which link to service-provider.
If vlanDot1qTunnelStatus is disabled, it means vlanDot1qTunnelPortMode is inactive."
::= { vlanDot1qTunnelPortEntry 2 }
vlanDot1qTunnelPortEtherType OBJECT-TYPE
SYNTAX Unsigned32 ('0800'h..'ffff'h)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TPID for 802.1Q encapsulation. It's used to select a nonstandard
(nondefault) 2-byte ethertype to identify 802.1Q tagged frames."
::= { vlanDot1qTunnelPortEntry 3 }
--
-- voiceVlanMgt
--
voiceVlanMgt OBJECT IDENTIFIER ::= { vlanMgt 6 }
voiceVlanOuiTable OBJECT-TYPE
SYNTAX SEQUENCE OF VoiceVlanOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing the mac address which can be identified
by Voice VLAN."
::= { voiceVlanMgt 1 }
voiceVlanOuiEntry OBJECT-TYPE
SYNTAX VoiceVlanOuiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing the mac address which can be identified
by Voice VLAN."
INDEX { voiceVlanOuiAddress }
::= { voiceVlanOuiTable 1 }
VoiceVlanOuiEntry ::=
SEQUENCE
{
voiceVlanOuiAddress MacAddress,
voiceVlanOuiMask MacAddress,
voiceVlanOuiDescription DisplayString,
voiceVlanOuiStatus ValidStatus
}
voiceVlanOuiAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "MAC address can be identified by voice vlan."
::= { voiceVlanOuiEntry 1 }
voiceVlanOuiMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The mask of MAC address."
::= { voiceVlanOuiEntry 2 }
voiceVlanOuiDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The description of OUI."
::= { voiceVlanOuiEntry 3 }
voiceVlanOuiStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Current operation status of the row."
::= { voiceVlanOuiEntry 4 }
voiceVlanEnabledId OBJECT-TYPE
SYNTAX INTEGER (-1|1..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice VLAN enabled status and VLAN ID:
enabled (1..4093), disabled (-1)."
::= { voiceVlanMgt 2 }
voiceVlanAgingTime OBJECT-TYPE
SYNTAX INTEGER (5..43200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice VLAN aging time, the unit of which is minute."
DEFVAL { 1440 }
::= { voiceVlanMgt 3 }
voiceVlanPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VoiceVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of voice VLAN port entries."
::= { voiceVlanMgt 7 }
voiceVlanPortEntry OBJECT-TYPE
SYNTAX VoiceVlanPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry containing Voice VLAN port information,
which is applicable to a Voice VLAN enabled interface."
INDEX { voiceVlanPortIfIndex }
::= { voiceVlanPortTable 1 }
VoiceVlanPortEntry ::=
SEQUENCE
{
voiceVlanPortIfIndex Integer32,
voiceVlanPortMode INTEGER,
voiceVlanPortSecurity EnabledStatus,
voiceVlanPortPriority INTEGER,
voiceVlanPortRuleOui EnabledStatus,
voiceVlanPortRuleLldp EnabledStatus,
voiceVlanPortRemainAge DisplayString
}
voiceVlanPortIfIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of interface on which Voice VLAN function
is enabled."
REFERENCE "IfIndex in RFC1213."
::= { voiceVlanPortEntry 1 }
voiceVlanPortMode OBJECT-TYPE
SYNTAX INTEGER
{
auto (1),
manual (2),
none (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Voice VLAN configuration mode status."
::= { voiceVlanPortEntry 2 }
voiceVlanPortSecurity OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If the security is enabled, the port only allows voice
traffic for the Voice VLAN."
::= { voiceVlanPortEntry 3 }
voiceVlanPortPriority OBJECT-TYPE
SYNTAX INTEGER(0..6)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The priority of the voice vlan traffic in the port."
::= { voiceVlanPortEntry 4 }
voiceVlanPortRuleOui OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The address of voice device is learned from
OUI table."
::= { voiceVlanPortEntry 5 }
voiceVlanPortRuleLldp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The address of voice device is learned from
LLDP discovery."
::= { voiceVlanPortEntry 6 }
voiceVlanPortRemainAge OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Remaining aging time, the unit of which is minute."
::= { voiceVlanPortEntry 7 }
--
-- macVlanMgt
--
macVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains the settings for MAC-based VLAN."
::= { vlanMgt 11 }
macVlanEntry OBJECT-TYPE
SYNTAX MacVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the macVlanTable."
INDEX { macVlanMacMask, macVlanMacAddress }
::= { macVlanTable 1 }
MacVlanEntry ::= SEQUENCE
{
macVlanMacAddress MacAddress,
macVlanId Integer32,
macVlanPriority Integer32,
macVlanStatus ValidStatus,
macVlanMacMask MacAddress
}
macVlanMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The MAC address that may specify an entry in the table
which contains MAC-based VLAN information."
::= { macVlanEntry 1 }
macVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4092)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the VLAN ID which the MAC address associates
with."
::= { macVlanEntry 2 }
macVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the priority whcich the MAC address associates
with."
::= { macVlanEntry 3 }
macVlanStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry."
::= { macVlanEntry 4 }
macVlanMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The MAC address mask that may specify an entry in the table
which contains MAC-based VLAN information."
::= { macVlanEntry 5 }
macVlanClearAction OBJECT-TYPE
SYNTAX INTEGER
{
noClear(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for clearing macVlanTable. When this object is set
to clear(2), all entries in macVlanTable will be cleared.
When this object is read, the value of this object is
always noClear(1)."
::= { vlanMgt 12 }
--
-- subnetVlanMgt
--
subnetVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SubnetVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table that contains the settings for IP subnet-based
VLAN."
::= { vlanMgt 13 }
subnetVlanEntry OBJECT-TYPE
SYNTAX SubnetVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the subnetVlanTable."
INDEX { subnetVlanMask, subnetVlanIpAddress }
::= { subnetVlanTable 1 }
SubnetVlanEntry ::= SEQUENCE
{
subnetVlanIpAddress IpAddress,
subnetVlanMask IpAddress,
subnetVlanId Integer32,
subnetVlanPriority Integer32,
subnetVlanStatus ValidStatus
}
subnetVlanIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IPv4 address of a subnet. Any assignment (implicit or
otherwise) of an instance of this object to a value x must
be rejected if the bitwise logical-AND of x with the value
of the corresponding instance of the subnetVlanMask object
is not equal to x."
::= { subnetVlanEntry 1 }
subnetVlanMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The netmask of a subnet. Any assignment (implicit or
otherwise) of an instance of this object to a value x must
be rejected if the bitwise logical-AND of x with the value
of the corresponding instance of the subnetVlanIpAddress
object is not equal to subnetVlanIpAddress."
::= { subnetVlanEntry 2 }
subnetVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the VLAN ID which the subnet associates with."
::= { subnetVlanEntry 3 }
subnetVlanPriority OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the priority whcich the subnet associates with."
::= { subnetVlanEntry 4 }
subnetVlanStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set this to valid(1) to create an entry. Set this to
invalid(2) to destroy an entry."
::= { subnetVlanEntry 5 }
subnetVlanClearAction OBJECT-TYPE
SYNTAX INTEGER
{
noClear(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for clearing subnetVlanTable. When this object is
set to clear(2), all entries in subnetVlanTable will be
cleared. When this object is read, the value of this object
is always noClear(1)."
::= { vlanMgt 14 }
-- vlanStaticExtTable
vlanStaticExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanStaticExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The extension table of dot1qVlanStaticTable. This table
enhances the original table with extra
vlanStaticExtRspanStatus to create and destroy RSPAN
VLAN(s)."
::= { vlanMgt 15 }
vlanStaticExtEntry OBJECT-TYPE
SYNTAX VlanStaticExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the vlanStaticExtTable."
AUGMENTS { dot1qVlanStaticEntry }
::= { vlanStaticExtTable 1 }
VlanStaticExtEntry ::= SEQUENCE
{
vlanStaticExtRspanStatus INTEGER
}
vlanStaticExtRspanStatus OBJECT-TYPE
SYNTAX INTEGER
{
destroy(1),
vlan(2),
rspanVlan(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Displays type of a VLAN is vlan(2) or rspanVlan(3). Set
this to destroy(1) to destroy a RSPAN VLAN. Set this to
rspanVlan(3) to create a RSPAN VLAN. Setting this to
vlan(2) is not allowed."
::= { vlanStaticExtEntry 1 }
--
-- vlanL2ProtocolTunnelPortTable
--
vlanL2ProtocolTunnelPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanL2ProtocolTunnelPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in Layer 2 Protocol
Tunneling."
::= { vlanMgt 16 }
vlanL2ProtocolTunnelPortEntry OBJECT-TYPE
SYNTAX VlanL2ProtocolTunnelPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in Layer 2 Protocol
Tunneling."
INDEX { vlanL2ptPortIndex }
::= { vlanL2ProtocolTunnelPortTable 1 }
VlanL2ProtocolTunnelPortEntry ::= SEQUENCE
{
vlanL2ptPortIndex Integer32,
vlanL2ptPortSta EnabledStatus,
vlanL2ptPortLldp EnabledStatus,
vlanL2ptPortCdp EnabledStatus,
vlanL2ptPortVtp EnabledStatus,
vlanL2ptPortPvst EnabledStatus
}
vlanL2ptPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface
of the portTable. The interface identified by a particular
value of this index is the same interface as identified by
the same value of ifIndex in the IF-MIB."
::= { vlanL2ProtocolTunnelPortEntry 1 }
vlanL2ptPortSta OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set enabled(1) to enable Layer 2 protocol tunneling for
spanning-tree protocol. Set disabled(2) to disable Layer 2
protocol tunneling for spanning-tree protocol."
::= { vlanL2ProtocolTunnelPortEntry 2 }
vlanL2ptPortLldp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable Layer 2 protocol tunneling for
LLDP. Set disabled(2) to disable Layer 2 protocol
tunneling for LLDP."
::= { vlanL2ProtocolTunnelPortEntry 3 }
vlanL2ptPortCdp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable Layer 2 protocol tunneling for
Cisco Discovery Protocol. Set disabled(2) to disable
Layer 2 protocol tunneling for Cisco Discovery Protocol."
::= { vlanL2ProtocolTunnelPortEntry 4 }
vlanL2ptPortVtp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable Layer 2 protocol tunneling for
Cisco VTP. Set disabled(2) to disable Layer 2 protocol
tunneling for Cisco VTP."
::= { vlanL2ProtocolTunnelPortEntry 5 }
vlanL2ptPortPvst OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable Layer 2 protocol tunneling for
Cisco PVST+. Set disabled(2) to disable Layer 2 protocol
tunneling for Cisco PVST+."
::= { vlanL2ProtocolTunnelPortEntry 6 }
--
-- vlanL2ProtocolTunnelGlobalConfig
--
vlanL2ProtocolTunnelGlobalConfig OBJECT IDENTIFIER ::= { vlanMgt 19 }
vlanL2ProtocolTunnelAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination MAC address for PDU tunneling."
::= { vlanL2ProtocolTunnelGlobalConfig 1 }
--
-- L2/L3 VLAN Mgt
--
vlanStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for static VLAN configuration including VLAN aggregation support."
::= { vlanMgt 17 }
vlanStaticEntry OBJECT-TYPE
SYNTAX VlanStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Static information for a VLAN configured on the device by (local or
network) management."
INDEX
{
vlanStaticIndex
}
::= { vlanStaticTable 1 }
VlanStaticEntry ::= SEQUENCE
{
vlanStaticIndex VlanIndex,
vlanStaticInterfaceType INTEGER
}
vlanStaticIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN ID of the VLAN."
::= { vlanStaticEntry 1 }
vlanStaticInterfaceType OBJECT-TYPE
SYNTAX INTEGER
{
l2vlan(135),
l3ipvlan(136)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface type of the VLAN (there is a subtype of IANAifType).
l2vlan(135) refers to L2 interface and can't accept any L3 related
configuration. l3ipvlan(136) refers to L3 interface and can accept
L3 related configuration."
DEFVAL { l2vlan }
::= { vlanStaticEntry 2 }
vlanDot1qTunnelSrvCvidPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF VlanDot1qTunnelSrvCvidPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration to specify how to insert
outer tag by matching customer VLAN ID."
::= { vlanMgt 18 }
vlanDot1qTunnelSrvCvidPortEntry OBJECT-TYPE
SYNTAX VlanDot1qTunnelSrvCvidPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration to specify how to insert
outer tag by matching customer VLAN ID."
INDEX { vlanDot1qTunnelSrvCvidPortIndex,
vlanDot1qTunnelSrvCvidPortCvid }
::= { vlanDot1qTunnelSrvCvidPortTable 1 }
VlanDot1qTunnelSrvCvidPortEntry ::= SEQUENCE
{
vlanDot1qTunnelSrvCvidPortIndex InterfaceIndex,
vlanDot1qTunnelSrvCvidPortCvid VlanIndex,
vlanDot1qTunnelSrvCvidPortSvid VlanId,
vlanDot1qTunnelSrvCvidPortStatus ValidStatus,
vlanDot1qTunnelSrvCvidPortAction BITS
}
vlanDot1qTunnelSrvCvidPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the vlanDot1qTunnelSrvCvidPortTable.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { vlanDot1qTunnelSrvCvidPortEntry 1 }
vlanDot1qTunnelSrvCvidPortCvid OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies customer VLAN ID."
::= { vlanDot1qTunnelSrvCvidPortEntry 2 }
vlanDot1qTunnelSrvCvidPortSvid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies service VLAN ID."
::= { vlanDot1qTunnelSrvCvidPortEntry 3 }
vlanDot1qTunnelSrvCvidPortStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Sets to valid(1) to create an entry.
Sets to invalid(2) to destroy an entry."
::= { vlanDot1qTunnelSrvCvidPortEntry 5 }
vlanDot1qTunnelSrvCvidPortAction OBJECT-TYPE
SYNTAX BITS {
reserved0(0),
reserved1(1),
assignSvid(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Sets to assignSvid(2) to assign service VLAN ID."
::= { vlanDot1qTunnelSrvCvidPortEntry 6 }
--
-- priorityMgt
--
-- Management for traffic priority. This allows a user
-- to specify which data packets have greater precedence
-- when traffic is buffered in the switch due to congestion.
prioIpPrecDscpStatus OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
precedence(2),
dscp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Selects whether no frame priority mapping, IP ToS
precedence mapping or DSCP mapping is performed."
::= { priorityMgt 1 }
prioIpDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioIpDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for IP DSCP priority mapping."
::= { priorityMgt 4 }
prioIpDscpEntry OBJECT-TYPE
SYNTAX PrioIpDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for IP DSCP priority mapping."
INDEX { prioIpDscpPort, prioIpDscpValue }
::= { prioIpDscpTable 1 }
PrioIpDscpEntry ::= SEQUENCE
{
prioIpDscpPort Integer32,
prioIpDscpValue Integer32,
prioIpDscpCos Integer32
}
prioIpDscpPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { prioIpDscpEntry 1 }
prioIpDscpValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Value of IP DSCP as specified in the packet header."
::= { prioIpDscpEntry 2 }
prioIpDscpCos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Class of Service as defined by dot1dTrafficClassPriority
in the P-BRIDGE-MIB. The prioIpDscpValue value in the same
table row will be mapped to this Class of Service (CoS).
This CoS is then further mapped to the hardware
queue according to dot1dTrafficClassTable."
REFERENCE "P-BRIDGE-MIB.dot1dPriority.dot1dTrafficClassTable."
::= { prioIpDscpEntry 3 }
prioIpDscpRestoreDefault OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables the IP DSCP settings of a port to be reset to their
defaults. To reset the IP DSCP settings of a port, assign
the value of the relevant ifIndex defined by the ifIndex in
the IF-MIB. For example, assigning the value 1 will result in
the IP DSCP settings of port 1 being restored to their default.
0 will always be obtained when reading this variable"
::= { priorityMgt 5 }
-- optional
prioCopy OBJECT IDENTIFIER ::= { priorityMgt 8 }
prioCopyIpDscp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action to copy IP DSCP settings from
a source port to many destination ports.
The first four octets represent an integer for
the source port in high-to-low (big-endian) order.
Starting from the 5th octet is the destination port list
in a form described by PortList in the Q-BRIDGE-MIB.
Writing this object will perform copy.
Reading this object will always get a zero-length
octet string."
::= { prioCopy 2 }
prioWrrTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioWrrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for weighted round robin (WRR)."
::= { priorityMgt 9 }
prioWrrEntry OBJECT-TYPE
SYNTAX PrioWrrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for weighted round robin (WRR)."
INDEX { prioWrrTrafficClass }
::= { prioWrrTable 1 }
PrioWrrEntry ::= SEQUENCE
{
prioWrrTrafficClass Integer32,
prioWrrWeight Integer32
}
prioWrrTrafficClass OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Traffic class for this entry, as defined in
dot1dTrafficClass in the P-BRIDGE-MIB. The actual
maximum depends on the hardware, and is
equal to dot1dPortNumTrafficClasses-1."
REFERENCE "MIB.IETF|P-BRIDGE-MIB.dot1dTrafficClass."
::= { prioWrrEntry 1 }
prioWrrWeight OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Weight for this entry."
::= { prioWrrEntry 2 }
prioQueueMode OBJECT-TYPE
SYNTAX INTEGER {
wrr(1),
strict(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The global status for the prioQueue.
wrr(1),strict(2)"
::= { priorityMgt 10 }
-- trapDestMgt
--
-- Management for SNMP traps and trap destinations.
trapDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrapDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of trap destination entries."
REFERENCE "RMON2-MIB, mib2(1).rmon(16).probeConfig(19).trapDestTable(13)."
::= { trapDestMgt 1 }
trapDestEntry OBJECT-TYPE
SYNTAX TrapDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A destination entry describes the destination IP address,
the community string, and SNMP version to use when sending
a trap."
INDEX { trapDestAddress }
::= { trapDestTable 1 }
TrapDestEntry ::= SEQUENCE {
trapDestAddress IpAddress,
trapDestCommunity OCTET STRING,
trapDestStatus ValidStatus,
trapDestVersion INTEGER,
trapDestUdpPort Integer32
}
trapDestAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address to send traps."
::= { trapDestEntry 1 }
trapDestCommunity OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A community to which this destination address belongs."
::= { trapDestEntry 2 }
trapDestStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { trapDestEntry 3 }
trapDestVersion OBJECT-TYPE
SYNTAX INTEGER
{
version1(1),
version2(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Determines the version of the trap that is to be sent to the
trap receiver. If the value is 1, then an SNMP version 1 trap
is sent and if the value is 2, an SNMP version 2 trap is
sent."
::= { trapDestEntry 4}
trapDestUdpPort OBJECT-TYPE
SYNTAX Integer32 ( 1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Determines the UDP port number that the trap will be sent to."
DEFVAL { 162 }
::= { trapDestEntry 5}
-- trapVar is for binding variables for traps, there is no value when
-- no trap is sent.
trapVar OBJECT IDENTIFIER ::= { trapDestMgt 2 }
-- For IP Filter Reject
trapIpFilterRejectMode OBJECT-TYPE
SYNTAX INTEGER
{
web(1),
snmp(2),
telnet(3)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicated the ipfilter reject mode.
web(1),
snmp(2),
telnet(3)."
::= { trapVar 6 }
trapIpFilterRejectIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicating the IP address that rejected by the ipfilter."
::= { trapVar 7 }
trapVarMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The variable binding for mac address type."
::= { trapVar 10 }
trapIpFilterRejectInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding, indicating
the IP address that was rejected by the IP filter."
::= { trapVar 17 }
trapIpFilterRejectInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding, indicating
the IP address that was rejected by the IP filter."
::= { trapVar 18 }
--For Auto Upgrade
trapAutoUpgradeResult OBJECT-TYPE
SYNTAX INTEGER
{
succeeded(1),
failed(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The parameter indicates which result triggers the trap."
::= { trapVar 22 }
trapAutoUpgradeNewVer OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..20))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The parameter indicates new version which was upgraded to.
When trapAutoUpgradeResult was failed(2), it would be
null string."
::= { trapVar 23 }
-- For DHCP rogue server attack
trapDhcpClientPortIfIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "ifIndex for the port connected to DHCP rogue server."
::= { trapVar 62 }
trapDhcpServerIpAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The IP address of the rogue server."
::= { trapVar 63 }
trapIfIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicating the index of an interface."
::= { trapVar 30 }
trapVlanId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicating the identifier of a VLAN."
::= { trapVar 31 }
-- For UDLD
trapUdldPortShutdownReason OBJECT-TYPE
SYNTAX INTEGER
{
unidirectionalLink(1),
mismatchWithNeighbor(2),
transmitToReceiveLoop(3),
aggressiveModeFailure(4)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "This variable is for trap var binding,
indicated the reason for the UDLD port shutdown.
unidirectionalLink(1): unidirectional link detected,
mismatchWithNeighbor(2): mismatch with neighbor state reported.
transmitToReceiveLoop(3): transmit-to-receive loop detected.
aggressiveModeFailure(4): aggressive mode failure detected."
::= { trapVar 66 }
trapAmtrHwSecurityMacAddressType OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
dynamic(2)
}
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The address types used to check AMTR hardware security MAC
type."
::= {trapVar 67}
--
-- qosMgt
--
-- Management for Quality of Service (QoS) for network traffic.
--
-- rateLimitMgt
--
-- optional
rateLimitMgt OBJECT IDENTIFIER ::= { qosMgt 1 }
rateLimitPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF RateLimitPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for rate limit of each port."
::= { rateLimitMgt 2 }
rateLimitPortEntry OBJECT-TYPE
SYNTAX RateLimitPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for rate limit of each port."
INDEX { rlPortIndex }
::= { rateLimitPortTable 1 }
RateLimitPortEntry ::= SEQUENCE
{
rlPortIndex Integer32,
rlPortInputStatus EnabledStatus,
rlPortOutputStatus EnabledStatus,
rlPortInputLimitInKilo Integer32,
rlPortOutputLimitInKilo Integer32
}
rlPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk member) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { rateLimitPortEntry 1 }
-- all need (both acd and non-acd)
rlPortInputStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether input rate limit is enabled for this port."
::= { rateLimitPortEntry 6 }
-- all need (both acd and non-acd)
rlPortOutputStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether output rate limit is enabled for this port."
::= { rateLimitPortEntry 7 }
rlPortInputLimitInKilo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the input rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000."
::= { rateLimitPortEntry 10 }
rlPortOutputLimitInKilo OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the output rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is 64 to 100000.
For a 1000 Mbps port, the range is 64 to 1000000."
::= { rateLimitPortEntry 11 }
cosMgt OBJECT IDENTIFIER ::= { qosMgt 3 }
--prioAclToCosMappingTable
prioAclToCosMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioAclToCosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for ACL to CoS Mapping."
::= { cosMgt 1 }
prioAclToCosMappingEntry OBJECT-TYPE
SYNTAX PrioAclToCosMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for ACL to CoS Mapping."
INDEX { prioAclToCosMappingIfIndex, prioAclToCosMappingAclName }
::= { prioAclToCosMappingTable 1 }
PrioAclToCosMappingEntry ::= SEQUENCE
{
prioAclToCosMappingIfIndex Integer32,
prioAclToCosMappingAclName DisplayString,
prioAclToCosMappingCosValue Integer32,
prioAclToCosMappingStatus RowStatus
}
prioAclToCosMappingIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the prioAclToCosMappingEntry. The interface
identified by a particular value of this index is the
same interface as identified by the same value of
ifIndex in the IF-MIB."
::= { prioAclToCosMappingEntry 1 }
prioAclToCosMappingAclName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The name of an IP ACL. Within a feature a unique name is
used to identify the list to which the entry belongs
in the device."
::= { prioAclToCosMappingEntry 2 }
prioAclToCosMappingCosValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "CoS value of the prioAclToCosMappingTable."
::= { prioAclToCosMappingEntry 3 }
prioAclToCosMappingStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { prioAclToCosMappingEntry 4 }
prioIfClassificationModeTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioIfClassificationModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for setting the interface Qos mapping classification mode."
::= { cosMgt 2 }
prioIfClassificationModeEntry OBJECT-TYPE
SYNTAX PrioIfClassificationModeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for setting the interface Qos mapping classification mode."
INDEX
{
prioIfClassificationModeIf
}
::= { prioIfClassificationModeTable 1 }
PrioIfClassificationModeEntry ::= SEQUENCE
{
prioIfClassificationModeIf Integer32,
prioIfClassificationModeStatus INTEGER
}
prioIfClassificationModeIf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port or trunk interface of the device. The interface identified by
a particular value of this index is the same interface as identified
by the same value of ifIndex in the IF-MIB."
::= { prioIfClassificationModeEntry 1 }
prioIfClassificationModeStatus OBJECT-TYPE
SYNTAX INTEGER
{
cos(0),
ipPrecedence(1),
dscp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Qos mapping classification mode of the interface. cos mode means
that the internal priority is mapped from priority field of packet's
VLAN tag if a VLAN tag exists; IP precedence mode means that the
internal priority is mapped from the IP precedence value of IP
packets; DSCP mode means the internal priority is mapped from the dscp
value of IP packets."
::= { prioIfClassificationModeEntry 2 }
--
-- The mapping table from CoS/CFI to internal QoS label
--
prioCosToDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioCosToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for CoS/CFI to internal QoS label mapping."
::= { cosMgt 3 }
prioCosToDscpEntry OBJECT-TYPE
SYNTAX PrioCosToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for CoS/CFI to internal QoS label mapping."
INDEX
{
prioCosToDscpIfValue,
prioCosToDscpCosValue,
prioCosToDscpCFIValue
}
::= { prioCosToDscpTable 1 }
PrioCosToDscpEntry ::= SEQUENCE
{
prioCosToDscpIfValue Integer32,
prioCosToDscpCosValue Integer32,
prioCosToDscpCFIValue Integer32,
prioCosToDscpDscpValue Integer32
}
prioCosToDscpIfValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port or the trunk interface of the device. The interface
identified by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { prioCosToDscpEntry 1 }
prioCosToDscpCosValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CoS value (0~7) mapped to an internal QoS label value which is
composed of PHB(3 bits) and drop precedence(2 bits)."
::= { prioCosToDscpEntry 2 }
prioCosToDscpCFIValue OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CFI value (0 or 1) mapped to an internal QoS label value which is
composed of PHB(3 bits) and drop precedence(2 bits)."
::= { prioCosToDscpEntry 3 }
prioCosToDscpDscpValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value used to represent the internal QoS label (3 bits PHB+2
bits Drop precedence). The MSB 4 bits of DSCP is used to represent PHB
value of QoS label; The LSB 2 bits of DSCP are used to represent the
drop precedence value of QoS label. Green(0), Yellow(3), Red(1). In a
word, PHB=(DSCP>>2), Drop precedence=(DSCP & 0x3).
Note: The setting range of PHB value must be 0~7 and the setting drop
precedence value must be one of the values (0,1,3)."
::= { prioCosToDscpEntry 4 }
--
-- The mapping table from IP precedence to internal Qos label
--
prioPrecToDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioPrecToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for IP precedence to internal QoS label mapping. This table
setting will take effect only when the interface QoS mapping
classification mode is set to IP precedence mode."
::= { cosMgt 4 }
prioPrecToDscpEntry OBJECT-TYPE
SYNTAX PrioPrecToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for IP precedence to internal QoS label mapping."
INDEX
{
prioPrecToDscpIfValue,
prioPrecToDscpPrecValue
}
::= { prioPrecToDscpTable 1 }
PrioPrecToDscpEntry ::= SEQUENCE
{
prioPrecToDscpIfValue Integer32,
prioPrecToDscpPrecValue Integer32,
prioPrecToDscpDscpValue Integer32
}
prioPrecToDscpIfValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port or trunk interface of the device. The interface identified by
a particular value of this index is the same interface as identified
by the same value of ifIndex in the IF-MIB."
::= { prioPrecToDscpEntry 1 }
prioPrecToDscpPrecValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP precedence value mapped to internal QoS label value which is
composed of PHB (3 bits) and drop precedence (2 bits)."
::= { prioPrecToDscpEntry 2 }
prioPrecToDscpDscpValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value used to represent internal QoS label (3 bits PHB + 2
bits Drop precedence). The MSB 4 bits of DSCP are used to represent
PHB value of QoS label; The LSB 2 bits of DSCP are used to represent
the drop precedence value of QoS label. Green(0),Yellow(3), Red(1).
In a word, PHB=(DSCP>>2), Drop precedence=(DSCP & 0x3). Note: The
setting range of PHB value must be 0~7 and the setting drop precedence
value must be one of values(0,1,3)."
::= { prioPrecToDscpEntry 3 }
--
-- The mapping table from DSCP to internal Qos label
--
prioDscpToDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioDscpToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for DSCP to internal QoS label mapping. This table setting will
take effect only when the interface Qos mapping classification mode is
set to DSCP mode."
::= { cosMgt 5 }
prioDscpToDscpEntry OBJECT-TYPE
SYNTAX PrioDscpToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for ingress DSCP to internal QoS label mapping."
INDEX
{
prioDscpToDscpIfValue,
prioDscpToDscpIngressDscpValue
}
::= { prioDscpToDscpTable 1 }
PrioDscpToDscpEntry ::= SEQUENCE
{
prioDscpToDscpIfValue Integer32,
prioDscpToDscpIngressDscpValue Integer32,
prioDscpToDscpDscpValue Integer32
}
prioDscpToDscpIfValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port or trunk interface of the device. The interface identified by
a particular value of this index is the same interface as identified
by the same value of ifIndex in the IF-MIB."
::= { prioDscpToDscpEntry 1 }
prioDscpToDscpIngressDscpValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ingress DSCP value which will be mapped to internal QoS label
value."
::= { prioDscpToDscpEntry 2 }
prioDscpToDscpDscpValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value used to represent internal QoS label (3 bits PHB + 2
bits Drop precedence). The MSB 4 bits of DSCP are used to represent
PHB value of Qos label. The LSB 2 bits of DSCP are used to represent
the drop precedence value of QoS label. Green(0),Yellow(3), Red(1).
In a word, PHB=(DSCP>>2), Drop precedence=(DSCP & 0x3).
Note: The setting range of PHB value must be 0~7 and the setting drop
precedence value must be one of values (0,1,3)."
::= { prioDscpToDscpEntry 3 }
--
-- The mapping table from TCP/UDP destination port number to internal Qos label
--
prioDstPortToDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioDstPortToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for TCP/UDP destination port number to internal Qos label
mapping. This table setting will always take effect for TCP/UDP
packets no matter of what interface QoS mapping classification mode is
set."
::= { cosMgt 6 }
prioDstPortToDscpEntry OBJECT-TYPE
SYNTAX PrioDstPortToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for TCP/UDP destination port to internal QoS label mapping."
INDEX
{
prioDstPortToDscpIfValue,
prioDstPortToDscpProtocolValue,
prioDstPortToDscpDstPortValue
}
::= { prioDstPortToDscpTable 1 }
PrioDstPortToDscpEntry ::= SEQUENCE
{
prioDstPortToDscpIfValue Integer32,
prioDstPortToDscpProtocolValue INTEGER,
prioDstPortToDscpDstPortValue Integer32,
prioDstPortToDscpDscpValue Integer32
}
prioDstPortToDscpIfValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port or the trunk interface of the device. The interface
identified by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { prioDstPortToDscpEntry 1 }
prioDstPortToDscpProtocolValue OBJECT-TYPE
SYNTAX INTEGER
{
tcp(6),
udp(17)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The protocol value (TCP:6, UDP:17) which will be mapped to internal
QoS label value."
::= { prioDstPortToDscpEntry 2 }
prioDstPortToDscpDstPortValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination port number value which will be mapped to internal
QoS label value."
::= { prioDstPortToDscpEntry 3 }
prioDstPortToDscpDscpValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The DSCP value used to represent internal QoS label (3 bits PHB + 2
bits Drop precedence). The MSB 4 bits of DSCP is used to represent PHB
value of QoS label. The LSB 2 bits of DSCP is used to represent the
drop precedence value of Qos label. Green(0),Yellow(3), Red(1). In a
word, PHB=(DSCP>>2), Drop precedence=(DSCP & 0x3). Note: The setting
range of PHB value must be 0~7 and the setting drop precedence value
must be one of values (0,1,3)."
::= { prioDstPortToDscpEntry 4 }
--
-- The mapping table from internal Qos label to CoS and CFI
--
prioDscpToCosTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioDscpToCosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for internal QoS label to CoS and CFI mapping."
::= { cosMgt 7 }
prioDscpToCosEntry OBJECT-TYPE
SYNTAX PrioDscpToCosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for internal QoS label to CoS and CFI mapping."
INDEX
{
prioDscpToCosIfValue,
prioDscpToCosPHBValue,
prioDscpToCosDropPrecedenceValue
}
::= { prioDscpToCosTable 1 }
PrioDscpToCosEntry ::= SEQUENCE
{
prioDscpToCosIfValue Integer32,
prioDscpToCosPHBValue Integer32,
prioDscpToCosDropPrecedenceValue INTEGER,
prioDscpToCosCFICosValue Integer32
}
prioDscpToCosIfValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port or trunk interface of the device. The interface identified by
a particular value of this index is the same interface as identified
by the same value of ifIndex in the IF-MIB."
::= { prioDscpToCosEntry 1 }
prioDscpToCosPHBValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PHB value of internal QoS label."
::= { prioDscpToCosEntry 2 }
prioDscpToCosDropPrecedenceValue OBJECT-TYPE
SYNTAX INTEGER
{
green(0),
red(1),
yellow(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The drop precedence value of internal QoS label. Green(0), Yellow(3),
Red(1)."
::= { prioDscpToCosEntry 3 }
prioDscpToCosCFICosValue OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The remarked CFI and CoS value mapped from the internal Qos label
value when the packet leaves the device. The egress remarked CFI
value equals to (prioDscpToCosCFICosValue >>3) and the egress
remarked CoS value equals to (prioDscpToCosCFICosValue & 0x7)."
::= { prioDscpToCosEntry 4 }
-- The mapping table for packet priority to drop precedence mapping.
prioPrioToDropPrecTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioPrioToDropPrecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for packet priority to drop precedence mapping."
::= { cosMgt 8 }
prioPrioToDropPrecEntry OBJECT-TYPE
SYNTAX PrioPrioToDropPrecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for packet priority to drop precedence mapping."
INDEX
{
prioPrioToDropPrecIfValue,
prioPrioToDropPrecPriorityValue
}
::= { prioPrioToDropPrecTable 1 }
PrioPrioToDropPrecEntry ::= SEQUENCE
{
prioPrioToDropPrecIfValue Integer32,
prioPrioToDropPrecPriorityValue Integer32,
prioPrioToDropPrecPrecValue INTEGER
}
prioPrioToDropPrecIfValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port or the trunk interface of the device. The interface
identified by a particular value of this index is the same interface
as identified by the same value of ifIndex in the IF-MIB."
::= { prioPrioToDropPrecEntry 1 }
prioPrioToDropPrecPriorityValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of packet default priority."
::= { prioPrioToDropPrecEntry 2 }
prioPrioToDropPrecPrecValue OBJECT-TYPE
SYNTAX INTEGER
{
green(0),
red(1),
yellow(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The drop precedence value of internal QoS label. Green(0),Yellow(3),
Red(1)."
::= { prioPrioToDropPrecEntry 3 }
-- The mapping table from PHB to queue
--
prioDscpToQueueTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrioDscpToQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for PHB to queue mapping."
::= { cosMgt 9 }
prioDscpToQueueEntry OBJECT-TYPE
SYNTAX PrioDscpToQueueEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for PHB to queue mapping."
INDEX
{
prioDscpToQueueIfValue,
prioDscpToQueuePHBValue
}
::= { prioDscpToQueueTable 1 }
PrioDscpToQueueEntry ::= SEQUENCE
{
prioDscpToQueueIfValue Integer32,
prioDscpToQueuePHBValue Integer32,
prioDscpToQueueQueueValue Integer32
}
prioDscpToQueueIfValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port or trunk interface of the device. The interface identified by
a particular value of this index is the same interface as identified
by the same value of ifIndex in the IF-MIB."
::= { prioDscpToQueueEntry 1 }
prioDscpToQueuePHBValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PHB value of internal QoS label."
::= { prioDscpToQueueEntry 2 }
prioDscpToQueueQueueValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The queue value which is mapped from the PHB value of QoS label."
::= { prioDscpToQueueEntry 3 }
--
--diffServMgt
--
diffServMgt OBJECT IDENTIFIER ::= { qosMgt 4 }
diffServPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for differentiated services on each port."
::= { diffServMgt 9 }
diffServPortEntry OBJECT-TYPE
SYNTAX DiffServPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for differentiated services on each port."
INDEX { diffServPortIfIndex }
::= { diffServPortTable 1 }
DiffServPortEntry ::= SEQUENCE
{
diffServPortIfIndex Integer32,
diffServPortPolicyMapIndex Integer32,
diffServPortIngressPolicyMapIndex Integer32,
diffServPortEngressPolicyMapIndex Integer32
}
diffServPortIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object is the interface index of diffServPortEntry.
The interface identified by a particular value of this
index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { diffServPortEntry 1 }
diffServPortIngressPolicyMapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the ingress policy map binding to the interface. The policy
map identified by a particular value of this index is
associated with the same DiffServPolicyMapEntry as identified
by the same value of diffServPolicyMapIndex."
::= { diffServPortEntry 6 }
diffServPortEngressPolicyMapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the engress policy map binding to the interface. The policy
map identified by a particular value of this index is
associated with the same DiffServPolicyMapEntry as identified
by the same value of diffServPolicyMapIndex."
::= { diffServPortEntry 7 }
diffServPolicyMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServPolicyMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for policy map."
::= { diffServMgt 10 }
diffServPolicyMapEntry OBJECT-TYPE
SYNTAX DiffServPolicyMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for policy map."
INDEX { diffServPolicyMapIndex }
::= { diffServPolicyMapTable 1 }
DiffServPolicyMapEntry ::= SEQUENCE
{
diffServPolicyMapIndex Integer32,
diffServPolicyMapName DisplayString,
diffServPolicyMapDescription DisplayString,
diffServPolicyMapElementIndexList OCTET STRING,
diffServPolicyMapStatus RowStatus
}
diffServPolicyMapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in this table."
::= { diffServPolicyMapEntry 1 }
diffServPolicyMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The name of this entry."
::= { diffServPolicyMapEntry 2 }
diffServPolicyMapDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The description of this entry."
::= { diffServPolicyMapEntry 3 }
diffServPolicyMapElementIndexList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The octet string containes the diffServPolicyMapElementEntry
indexes. Two octets express one index and it is represented
in network order. This index list indicates the
diffServPolicyMapEntrys which belong to this entry."
::= { diffServPolicyMapEntry 4 }
diffServPolicyMapStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active');it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServPolicyMapEntry 5 }
diffServPolicyMapAttachCtl OBJECT IDENTIFIER ::= { diffServMgt 11 }
diffServPolicyMapAttachCtlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Index for attachment control.
Specifies the policy map as the target to relate with
the policy map element. The policy map identified by
a particular value of this index is associated with
the same diffServPolicyMapEntry as identified by the
same value of diffServPolicyMapIndex."
::= { diffServPolicyMapAttachCtl 1 }
diffServPolicyMapAttachCtlElementIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Element Index for attachment control.Specifies the policy map
element to relate with the policy map. The policy map element
identified by a particular value of this index is associated
with the same diffServPolicyMapElementEntry as identified by
the same value of diffServPolicyMapElementIndex."
::= { diffServPolicyMapAttachCtl 2 }
diffServPolicyMapAttachCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
attach(2),
detach(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for attachment control. When setting this object to
attach(2) to begin the attaching operation, a particular
policy map element is attached to a particular policy map.
When setting this object to detach(3) to begin the not
attached operation, a particular policy map element is not
attached to a particular policy map. When the action is
finshed or no action is taken, the value of this object is
noAction(1). A particular policy map is specified in the
diffServPolicyMapAttachCtlIndex. A particularpolicy map
element is specified in the
diffServPolicyMapAttachCtlElementIndex."
::= { diffServPolicyMapAttachCtl 3 }
diffServPolicyMapElementTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServPolicyMapElementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for policy map element."
::= { diffServMgt 12 }
diffServPolicyMapElementEntry OBJECT-TYPE
SYNTAX DiffServPolicyMapElementEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for policy map element."
INDEX { diffServPolicyMapElementIndex }
::= { diffServPolicyMapElementTable 1 }
DiffServPolicyMapElementEntry ::= SEQUENCE
{
diffServPolicyMapElementIndex Integer32,
diffServPolicyMapElementClassMapIndex Integer32,
diffServPolicyMapElementMeterIndex Integer32,
diffServPolicyMapElementActionIndex Integer32,
diffServPolicyMapElementStatus RowStatus
}
diffServPolicyMapElementIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in this table."
::= { diffServPolicyMapElementEntry 1 }
diffServPolicyMapElementClassMapIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the class map binding to this entry. The class map
identified by a particular value of this index is associated
with the same diffServClassMapEntry as identified by the same
value of diffServClassMapIndex."
::= { diffServPolicyMapElementEntry 2 }
diffServPolicyMapElementMeterIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the meter binding to this entry. The meter
identified by a particular value of this index is associated
with the same diffServMeterEntry as identified by the same
value of diffServMeterIndex. If this value is
zero, no associated meter will be associated, as zero is not a
valid meter index."
::= { diffServPolicyMapElementEntry 3 }
diffServPolicyMapElementActionIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the action binding to this entry. The action
identified by a particular value of this index is associated
with the same diffServActionEntry as identified by the same
value of diffServActionIndex."
::= { diffServPolicyMapElementEntry 4 }
diffServPolicyMapElementStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row, or modify or delete
an existing row, in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServPolicyMapElementEntry 5 }
diffServClassMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServClassMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for class map."
::= { diffServMgt 13 }
diffServClassMapEntry OBJECT-TYPE
SYNTAX DiffServClassMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for class map."
INDEX { diffServClassMapIndex }
::= { diffServClassMapTable 1 }
DiffServClassMapEntry ::= SEQUENCE
{
diffServClassMapIndex Integer32,
diffServClassMapName DisplayString,
diffServClassMapDescription DisplayString,
diffServClassMapMatchType INTEGER,
diffServClassMapElementIndexTypeList OCTET STRING,
diffServClassMapElementIndexList OCTET STRING,
diffServClassMapStatus RowStatus
}
diffServClassMapIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in this table."
::= { diffServClassMapEntry 1 }
diffServClassMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The name of this entry."
::= { diffServClassMapEntry 2 }
diffServClassMapDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The description of this entry."
::= { diffServClassMapEntry 3 }
diffServClassMapMatchType OBJECT-TYPE
SYNTAX INTEGER {
matchAny(1),
matchAll(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The map match type of this entry."
::= { diffServClassMapEntry 4 }
diffServClassMapElementIndexTypeList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The octet string containes the type of class map element
indexes. Two octets which are represented in network order
express one type of the class map element index in network
order and it maps the index of
differServClasssMapElementIndexList in order. When the type is
macAce(1), the maping index of
differServClasssMapElementIndexList is the
diffServMacAceEntry. When the type is ipAce(2), the maping
index of differServClasssMapElementIndexList is the
diffServIpAceEntry. When the type is acl(3), the maping index
of differServClasssMapElementIndexList is the diffServAclEntry."
::= { diffServClassMapEntry 5 }
diffServClassMapElementIndexList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The octet string containes the class map element indexes. Two
octets express one index and it is represented in
network order. This index list indicates the particular
class map elements which belong to this table. The class map
element uses type to indicate diffServAclEntry, the
diffServIpAceEntry or diffServMacAceEntry. The type is two
octet specified in differServClasssMapElementIndexTypeList
in order. When the type is macAce(1), the maping index of
differServClasssMapElementIndexList is the
diffServMacAceEntry. When the type is ipAce(2), the maping
index of differServClasssMapElementIndexList is the
diffServIpAceEntry. When the type is acl(3), the maping index
of differServClasssMapElementIndexList is the diffServAclEntry."
::= { diffServClassMapEntry 6 }
diffServClassMapStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table.The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServClassMapEntry 7 }
diffServClassMapAttachCtl OBJECT IDENTIFIER ::= { diffServMgt 14 }
diffServClassMapAttachCtlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Index for attachment control. Specifies the class map as
the target to relate with class map elements. The class
map identified by a particular value of this index is
associated with the same diffServClassMapEntry as
identified by the same value of diffServClassMapIndex."
::= { diffServClassMapAttachCtl 1 }
diffServClassMapAttachCtlElementIndexType OBJECT-TYPE
SYNTAX INTEGER {
macAce(1),
ipAce(2),
acl(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Element Index for attachment control. Specifies the type of
class map element to relate with the class map. When type is
macAce(1), the index of diffServClassMapAttachCtlElementIndex
is the index of diffServMacAceEntry. When the type is
ipAce(2), the index of diffServClassMapAttachCtlElementIndex
is the index of diffServIpAceEntry. When the type is acl(3),
the index of diffServClassMapAttachCtlElementIndex is the
index of diffServAclEntry."
::= { diffServClassMapAttachCtl 2 }
diffServClassMapAttachCtlElementIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Element Index for attachment control. Specifies the class map
element related with the class map. The class map element uses
type to indicate diffServAclEntry, the diffServIpAceEntry or
diffServMacAceEntry. The type is specified in
diffServClassMapAttachCtlElementIndexType. When
the type is macAce(1), the maping index of
differServClasssMapElementIndexList is the
diffServMacAceEntry. When the type is ipAce(2), the maping
index of differServClasssMapElementIndexList is the
diffServIpAceEntry. When the type is acl(3), the maping index
of differServClasssMapElementIndexList is the
diffServAclEntry."
::= { diffServClassMapAttachCtl 3 }
diffServClassMapAttachCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
attach(2),
detach(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for attachment control. When setting this object to
attach(2) to begin the attaching operation, a particular class
map element is attached to a particular class map. When
setting this object to detach(3) to begin the not attached
operation, then a particular class map element is not attached
to a particular class map. When the action is finshed whether
successfully or not, or no action is taken, the value of this
object always is noAction(1). The value of a particular class
map is specified in the AclAttachCtlTargetIndex. The class map
element is specified by diffServClassMapAttachCtlElementIndexType
and diffServClassMapAttachCtlElementIndex."
::= { diffServClassMapAttachCtl 4 }
diffServAclTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for ACL."
::= { diffServMgt 15 }
diffServAclEntry OBJECT-TYPE
SYNTAX DiffServAclEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for ACL."
INDEX { diffServAclIndex }
::= { diffServAclTable 1 }
DiffServAclEntry ::= SEQUENCE
{
diffServAclIndex Integer32,
diffServAclName DisplayString,
diffServAclType INTEGER,
diffServAclAceIndexList OCTET STRING,
diffServAclStatus RowStatus
}
diffServAclIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in the ACL
table."
::= { diffServAclEntry 1 }
diffServAclName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The name of this entry."
::= { diffServAclEntry 2 }
diffServAclType OBJECT-TYPE
SYNTAX INTEGER {
mac(1),
ipstandard(2),
ipextended(3),
ipv6standard(4),
ipv6extended(5),
arp(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The type of this entry. When the value of ACL type is
modified, then the ACEs in the diffServAclAceIndexList of
this entry will be auto-removed, and this entry will be auto-
unbound from the diffServPortTable and the
diffServClassMapTable."
::= { diffServAclEntry 3 }
diffServAclAceIndexList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The octet string containes the ACE indexes. Two octets
express one index and it is represented in network
order. This index list indicates the particular ACEs which
belong to this table. The ACE uses type to indicate the
diffServMacAceEntry, the diffServIpAceEntry, the
diffServIpv6AceEntry or the diffServArpAceEntry. The type is
specified in diffServAclType. When the type is mac(1), the
index of diffServAclAceIndexList is the diffServMacAceEntry.
When the type is ipstandard(2) or ipextended(3), the index of
diffServAclAceIndexList is the diffServIpAceEntry. When the
type is ipv6standard(4) or ipv6extended(5), the index of
diffServAclAceIndexList is the diffServIpv6AceEntry. When the
type is arp(6), the index of diffServAclAceIndexList is the
diffServArpAceEntry."
::= { diffServAclEntry 4 }
diffServAclStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServAclEntry 5 }
diffServAclAttachCtl OBJECT IDENTIFIER ::= { diffServMgt 16 }
diffServAclAttachCtlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Index for attachment control. Specifies the ACL as the
target to relate with the IP ACE, the MAC ACE or IPv6 ACE.
The ACL identified by a particular value of this index is
associated with the same diffServAclEntry as identified by
the same value of diffServAclIndex."
::= { diffServAclAttachCtl 1 }
diffServAclAttachCtlAceType OBJECT-TYPE
SYNTAX INTEGER
{
macAce(1),
ipAce(2),
ipv6Ace(3),
arpAce(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Type for attachment control. Specifies the type of
diffServAclAttachCtlAceIndex to relate with the
diffServAclAttachCtlIndex. When the type is macAce(1), the
index of diffServAclAceIndexList is the diffServMacAceEntry.
When the type is ipAce(2), the index of
diffServAclAceIndexList is the diffServIpAceEntry. When the
type is ipv6Ace(3), the index of diffServAclAceIndexList
is the diffServIpv6AceEntry. When the type is arpAce(4), the
index of diffServAclAceIndexList is the diffServArpAceEntry."
::= { diffServAclAttachCtl 2 }
diffServAclAttachCtlAceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Index for attachment control. Specifies the ACE to relate with
the diffServAclAttachCtlIndex. When
diffServAclAttachCtlAceType is macAce(1), the value of
diffServAclAttachCtlIndex is the diffServMacAceEntry. When
diffServAclAttachCtlAceType is ipAce(2), the value of
diffServAclAttachCtlIndex is the diffServIpAceEntry. When
diffServAclAttachCtlAceType is ipv6Ace(3), the value of
diffServAclAttachCtlIndex is the diffServIpv6AceEntry. When
diffServAclAttachCtlAceType is arpAce(4), the value of
diffServAclAttachCtlIndex is the diffServArpAceEntry."
::= { diffServAclAttachCtl 3 }
diffServAclAttachCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
attach(2),
detach(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for attachment control. When setting this object to
attach(2) to begin the attaching operation, a particular ACE
is attached to a particular ACL. When setting this object to
detach(3) to begin the not attached operation, then a
particular ACE is not attached to a particular ACL. When the
action is finshed whether successfully or not, or no action
is taken, the value of this object always is noAction(1), The
value of a particular ACL is specified in the
diffServAclAttachCtlAceType and diffServAclAttachCtlAceIndex."
::= { diffServAclAttachCtl 4 }
diffServIpAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServIpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for IP ACE."
::= { diffServMgt 17 }
diffServIpAceEntry OBJECT-TYPE
SYNTAX DiffServIpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for IP ACE."
INDEX { diffServIpAceIndex }
::= { diffServIpAceTable 1 }
DiffServIpAceEntry ::= SEQUENCE
{
diffServIpAceIndex Integer32,
diffServIpAceType INTEGER,
diffServIpAceAccess INTEGER,
diffServIpAceSourceIpAddr IpAddress,
diffServIpAceSourceIpAddrBitmask IpAddress,
diffServIpAceDestIpAddr IpAddress,
diffServIpAceDestIpAddrBitmask IpAddress,
diffServIpAceProtocol Integer32,
diffServIpAcePrec Integer32,
diffServIpAceTos Integer32,
diffServIpAceDscp Integer32,
diffServIpAceSourcePortOp INTEGER,
diffServIpAceMinSourcePort Integer32,
diffServIpAceSourcePortBitmask Integer32,
diffServIpAceDestPortOp INTEGER,
diffServIpAceMinDestPort Integer32,
diffServIpAceDestPortBitmask Integer32,
diffServIpAceControlCode Integer32,
diffServIpAceControlCodeBitmask Integer32,
diffServIpAceStatus RowStatus
}
diffServIpAceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in the IP ACE
table."
::= { diffServIpAceEntry 1 }
diffServIpAceType OBJECT-TYPE
SYNTAX INTEGER {
standard(1),
extended(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified IP ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0."
::= { diffServIpAceEntry 2 }
diffServIpAceAccess OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches this
ACE."
::= { diffServIpAceEntry 3 }
diffServIpAceSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source IP address. The packet's source address
is AND-ed with the value of IpAceSourceIpAddrBitmask and then
compared against the value of this object."
::= { diffServIpAceEntry 4 }
diffServIpAceSourceIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source IP address mask. The packet's source
address is AND-ed with the value of IpAceSourceIpAddr and
then compared against the value of this object."
::= { diffServIpAceEntry 5 }
diffServIpAceDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address. The packet's
destination address is AND-ed with the value of
diffServIpAceDestIpAddrBitmask and then compared against the
value of this object. This object may not be modified if the
associated diffServIpAceType object is equal to standard(1)."
::= { diffServIpAceEntry 6 }
diffServIpAceDestIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address mask. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1)."
::= { diffServIpAceEntry 7 }
diffServIpAceProtocol OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The protocol number field in the IP header used to indicate
the higher layer protocol as specified in RFC 1700. A value
of 0 matches every IP packet. The object=256 means 'any'. For
example: 0 is IP, 1 is ICMP, 2 is IGMP, 4 is IP in IP
encapsulation, 6 is TCP, 9 is IGRP, 17 is UDP, 47 is GRE, 50
is ESP, 51 is AH, 88 is IGRP, 89 is OSPF, 94 is KA9Q/NOS
compatible IP over IP, 103 is PIMv2, 108 is PCP. This object
may not be modified if the associated diffServIpAceType object
is equal to standard(1)."
::= { diffServIpAceEntry 8 }
diffServIpAcePrec OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the IP precedence value to match against. The value
of this object is ignored whenever the value of
diffServIpAcePrec object is 8. This object may not be modified
if the associated diffServIpAceType object is equal to
standard(1)."
::= { diffServIpAceEntry 9 }
diffServIpAceTos OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the IP ToS facility value to match against. The
value of this object is ignored whenever the value of
diffServIpAcePrec object is 9. This object may not be modified
if the associated diffServIpAceType object is equal to
standard(1)."
::= { diffServIpAceEntry 10 }
diffServIpAceDscp OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the DSCP value to match against. The value of this
object is ignored whenever the value of diffServIpAcePrec
object is 64. This object may not be modified if the
associated diffServIpAceType object is equal to standard(1)."
::= { diffServIpAceEntry 11 }
diffServIpAceSourcePortOp OBJECT-TYPE
SYNTAX INTEGER {
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's source TCP/UDP port number is to be
compared. noOperator(1), which is the default value, means no
comparison is to be made with the source TCP/UDP port
number. equal(2), which is used the
diffServIpAceSourcePortBitmask and the
diffServIpAceMinSourcePort to match against. range(3),which is
used the diffServIpAceMinSourcePort and the
diffServIpAceMaxSourcePort to match against. This object may
not be modified if the associated diffServIpAceType object is
equal to standard(1)."
::= { diffServIpAceEntry 12 }
diffServIpAceMinSourcePort OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the diffServIpAceSourcePortOp is range(3), this
indicates the lower bound of the TCP/UDP port number
value range. This object may not be modified if the
associated diffServIpAceType object is equal to
standard(1)."
::= { diffServIpAceEntry 13 }
diffServIpAceSourcePortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the diffServIpAceSourcePortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinSourcePort. This object may
not be modified if the associated diffServIpAceType object is
equal to standard(1)."
::= { diffServIpAceEntry 15 }
diffServIpAceDestPortOp OBJECT-TYPE
SYNTAX INTEGER{
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's destination TCP/UDP port number is
to be compared. noOperator(1), which is the default value,
means that no comparison is to be made with the destination
TCP/UDP port number. equal(2), which is used the
diffServIpAceSourcePortBitmask and the
diffServIpAceMinDestPort to match against. range(3),which is
used the diffServIpAceMinDestPort and the
diffServIpAceMaxDestPort to match against. This object may not
be modified if the associated diffServIpAceType object is
equal to standard(1)."
::= { diffServIpAceEntry 16 }
diffServIpAceMinDestPort OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the diffServIpAceDestPortOp is range(3), this indicates
the lower bound of the TCP/UDP port number value range. This
object may not be modified if the associated
diffServIpAceType object is equal to standard(1)."
::= { diffServIpAceEntry 17 }
diffServIpAceDestPortBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the diffServIpAceDestPortOp is equal(2), this indicates
the bitmask of the diffServIpAceMinDestPort. This object may
not be modified if the associated diffServIpAceType object
is equal to standard(1)."
::= { diffServIpAceEntry 19 }
diffServIpAceControlCode OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how the control flags of TCP packets are to be
compared. diffServIpAceControlCode is AND-ed with
diffServIpAceControlCodeBitmask. This object may not be
modified if the associated diffServIpAceType object is
equal to standard(1)."
::= { diffServIpAceEntry 20 }
diffServIpAceControlCodeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how the control flags of TCP packets are to be
compared. It can be used to check multiple flags of the FIN,
SYN, RST, PSH, ACK, URG by the sum of FIN=1, SYN=2, RST=4,
PSH=8, ACK=16, URG=32. This object may not be modified if the
associated diffServIpAceType object is equal to standard(1)."
::= { diffServIpAceEntry 21 }
diffServIpAceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServIpAceEntry 22 }
diffServMacAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServMacAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for MAC ACE."
::= { diffServMgt 18 }
diffServMacAceEntry OBJECT-TYPE
SYNTAX DiffServMacAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for MAC ACE."
INDEX { diffServMacAceIndex }
::= { diffServMacAceTable 1 }
DiffServMacAceEntry ::= SEQUENCE
{
diffServMacAceIndex Integer32,
diffServMacAceAccess INTEGER,
diffServMacAcePktformat INTEGER,
diffServMacAceSourceMacAddr MacAddress,
diffServMacAceSourceMacAddrBitmask MacAddress,
diffServMacAceDestMacAddr MacAddress,
diffServMacAceDestMacAddrBitmask MacAddress,
diffServMacAceVidOp INTEGER,
diffServMacAceMinVid Integer32,
diffServMacAceVidBitmask Integer32,
diffServMacAceEtherTypeOp INTEGER,
diffServMacAceEtherTypeBitmask Integer32,
diffServMacAceMinEtherType Integer32,
diffServMacAceCosOp INTEGER,
diffServMacAceCosBitmask INTEGER,
diffServMacAceMinCos INTEGER,
diffServMacAceStatus RowStatus
}
diffServMacAceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in the MAC ACE
table."
::= { diffServMacAceEntry 1 }
diffServMacAceAccess OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches this
ACE."
::= { diffServMacAceEntry 2 }
diffServMacAcePktformat OBJECT-TYPE
SYNTAX INTEGER {
any(1),
packet-eth2(6),
packet-snap(7),
packet-llc-other(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to check the packet format of the packets. This object
cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1)."
::= { diffServMacAceEntry 3 }
diffServMacAceSourceMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit source MAC address. The specified source
MAC of the packet. The packet's source MAC address is AND-ed
with the value of diffServMacAceSourceMacAddrBitmask
and then compared against the value of this object."
::= { diffServMacAceEntry 4 }
diffServMacAceSourceMacAddrBitmask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source MAC address mask."
::= { diffServMacAceEntry 5 }
diffServMacAceDestMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit destination MAC address. The specified
destination MAC of the packet. The packet's destination MAC
address is AND-ed with the value of
diffServMacAceDestMacAddrBitmask and then compared against
the value of this object."
::= { diffServMacAceEntry 6 }
diffServMacAceDestMacAddrBitmask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination MAC address mask."
::= { diffServMacAceEntry 7 }
diffServMacAceVidOp OBJECT-TYPE
SYNTAX INTEGER {
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's VID is to be compared. This
object cannot be configured when the status of the entry,
diffServMacAceStatus, is active(1)."
::= { diffServMacAceEntry 8 }
diffServMacAceMinVid OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the lower bound of the VID value range if the
diffServMacAceVidOp is range(3)."
::= { diffServMacAceEntry 9 }
diffServMacAceVidBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'0FFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bit mask of the VID. The default value is 0."
DEFVAL { 0 }
::= { diffServMacAceEntry 10 }
diffServMacAceEtherTypeOp OBJECT-TYPE
SYNTAX INTEGER {
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's ether type is to be compared."
::= { diffServMacAceEntry 12 }
diffServMacAceEtherTypeBitmask OBJECT-TYPE
SYNTAX Integer32 (0..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bit mask of Ether type. The default value is 0."
DEFVAL { 0 }
::= { diffServMacAceEntry 13 }
diffServMacAceMinEtherType OBJECT-TYPE
SYNTAX Integer32 ('0000'h..'FFFF'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the lower bound of the ether type value range
if the diffServMacAceEtherTypeOp is range(3)."
::= { diffServMacAceEntry 14 }
diffServMacAceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServMacAceEntry 16 }
diffServMacAceCosOp OBJECT-TYPE
SYNTAX INTEGER {
noOperator(1),
equal(2),
range(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates how a packet's CoS is compared.
If the object type of diffServMacAceCosOp is equal(2),
diffServMacAceMinCos indicates the CoS value for comparing, and
diffServMacAceCosBitmask is used as the bitmask of the CoS value.
If the object type of diffServMacAceCosOp is range(3),
diffServMacAceMinCos should be used as the lower bound of the CoS value."
::= { diffServMacAceEntry 17 }
diffServMacAceCosBitmask OBJECT-TYPE
SYNTAX INTEGER ('0'h..'7'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the bitmask of the CoS value if the object type of
diffServMacAceCosOp is equal(2). The default value is 0."
::= { diffServMacAceEntry 18 }
diffServMacAceMinCos OBJECT-TYPE
SYNTAX INTEGER ('0'h..'7'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "If the object type of diffServMacAceCosOp is equal(2),
diffServMacAceMinCos indicates the CoS value for comparing.
If the object type of diffServMacAceCosOp is range(3),
diffServMacAceMinCos indicates the lower bound of the CoS value."
::= { diffServMacAceEntry 19 }
diffServActionTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for action."
::= { diffServMgt 19 }
diffServActionEntry OBJECT-TYPE
SYNTAX DiffServActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for action."
INDEX { diffServActionIndex }
::= { diffServActionTable 1 }
DiffServActionEntry ::= SEQUENCE
{
diffServActionIndex Integer32,
diffServActionList BITS,
diffServActionPktNewPri Integer32,
diffServActionPktNewPhb Integer32,
diffServActionGreenPktTransmit EnabledStatus,
diffServActionGreenPktNewDscp Integer32,
diffServActionYellowPktNewDscp Integer32,
diffServActionYellowPktDrop EnabledStatus,
diffServActionRedPktNewDscp Integer32,
diffServActionRedPktDrop EnabledStatus,
diffServActionStatus RowStatus,
diffServActionPktNewIpPrec Integer32,
diffServActionPktNewDscp Integer32
}
diffServActionIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in the
action table."
::= { diffServActionEntry 1 }
diffServActionList OBJECT-TYPE
SYNTAX BITS
{
actionPktNewPri(0),
reserved1(1),
actionGreenPktNewDscp(2),
actionGreenPktTransmit(3),
actionYellowPktNewDscp(4),
actionYellowPktDrop(5),
actionRedPktNewDscp(6),
actionRedPktDrop(7),
reserved8(8),
actionPktNewPhb(9),
actionPktNewIpPrec(10),
actionPktNewDscp(11)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The bitmap value used to identify which action
capabilities are enabled on the entry. The
actionPktNewPri and actionPktNewDscp can not be
enabled at the same time on the entry. The
actionRedPktNewDscp and actionRedDrop can not be
enabled at the same time on the entry."
::= { diffServActionEntry 2 }
diffServActionPktNewPri OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the new priority value for the packet when
the action is satisfied. If the actionPktNewPri bit of
the diffServActionList is not enabled, this object can
not be set."
::= { diffServActionEntry 3 }
diffServActionPktNewPhb OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the inner priority value for the packet when
the action is satisfied. If the actionPktNewPhb bit of
the diffServActionList is not enabled, this object can
not be set."
::= { diffServActionEntry 4 }
diffServActionGreenPktTransmit OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The actionGreenPktTransmit bit of the
diffServActionList is for configuring this
object. If the value of this object is enabled, the
green marking packet will be Transmitted."
::= { diffServActionEntry 5 }
diffServActionGreenPktNewDscp OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the new DSCP value for the packet when
the action is satisfied. The value of this object
is ignored whenever the value of diffServActionGreenPktNewDscp
object is 64. If the actionGreenPktNewDscp bit of
the diffServActionList is not enabled, this object
can not be set."
::= { diffServActionEntry 6 }
diffServActionYellowPktNewDscp OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the new DSCP value for the packet when
the action is satisfied. The value of this object is ignored
whenever the value of diffServActionYellowPktNewDscp object is 64.
If the actionYellowPktNewDscp bit of the diffServActionList is
not enabled, this object can not be set."
::= { diffServActionEntry 7 }
diffServActionYellowPktDrop OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The actionYellowPktDrop bit of the
diffServActionList is for configuring this
object. If the value of this object is enabled, the
red marking packet will be dropped."
::= { diffServActionEntry 8 }
diffServActionRedPktNewDscp OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the new DSCP value for the red
marking packet when the action is satisfied. The value
of this object is ignored whenever the value of
diffServActionRedPktNewDscp object is 64. If the
actionRedPktNewDscp bit of the diffServActionList is
not enabled, this object can not be set."
::= { diffServActionEntry 9 }
diffServActionRedPktDrop OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The actionRedPktDrop bit of the
diffServActionList is for configuring this
object. If the value of this object is enabled, the
red marking packet will be dropped."
::= { diffServActionEntry 10 }
diffServActionStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row, modify or
delete an existing row in this table.
The status column has six defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row
is available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use
by the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically
set to active, making it available for use by the
managed device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management
station wishing to delete all of the instances
associated with an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService'
or 'active'. That is, when queried, an existing
conceptual row has only three states: it is either
available for use by the managed device (the status column
has the value 'active'); it is not available for use by
the managed device, though the agent has sufficient
information to make it so (the status column has the value
'notInService'); or, it is not available for use by the
managed device, and an attempt to make it so would fail
because the agent has insufficient information (the state
column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServActionEntry 11 }
diffServActionPktNewIpPrec OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the new precedence value for the packet when
the action is satisfied. If the actionPktNewIpPrec bit of
the diffServActionList is not enabled, this object can
not be set."
::= { diffServActionEntry 12 }
diffServActionPktNewDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the new DSCP value for the packet when
the action is satisfied. If the actionPktNewDscp bit of
the diffServActionList is not enabled, this object
can not be set."
::= { diffServActionEntry 13 }
diffServMeterTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServMeterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for meter."
::= { diffServMgt 20 }
diffServMeterEntry OBJECT-TYPE
SYNTAX DiffServMeterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for meter."
INDEX { diffServActionIndex }
::= { diffServMeterTable 1 }
DiffServMeterEntry ::= SEQUENCE
{
diffServMeterIndex Integer32,
diffServMeterModel INTEGER,
diffServMeterRate Integer32,
diffServMeterBurstSize Integer32,
diffServMeterStatus RowStatus,
diffServMeterExcessRate Integer32,
diffServMeterExcessBurstSize Integer32
}
diffServMeterIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry that describes a single set of token bucket
parameters."
::= { diffServMeterEntry 1 }
diffServMeterModel OBJECT-TYPE
SYNTAX INTEGER {
default(0),
flow(1),
trTcmColorBlind(2),
trTcmColorAware(3),
srTcmColorBlind(6),
srTcmColorAware(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The Metering algorithm associated with the Token Bucket
parameters. The zeroDotZero indicates this is unknown."
::= { diffServMeterEntry 2 }
diffServMeterRate OBJECT-TYPE
SYNTAX Integer32 (0|1..1000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The token-bucket rate, in kilobits per second (kbps)."
::= { diffServMeterEntry 3 }
diffServMeterBurstSize OBJECT-TYPE
SYNTAX Integer32 (0|1..2147000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The maximum number of bytes in a single transmission burst."
::= { diffServMeterEntry 4 }
diffServMeterStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServMeterEntry 6 }
diffServMeterExcessRate OBJECT-TYPE
SYNTAX Integer32 (0|1..1000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The token-bucket rate, in kilobits per second (kbps)."
::= { diffServMeterEntry 9 }
diffServMeterExcessBurstSize OBJECT-TYPE
SYNTAX Integer32 (0|1..2147000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The maximum number of bytes in a double transmission burst."
::= { diffServMeterEntry 10 }
diffServIpv6AceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServIpv6AceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for IPv6 ACE."
::= { diffServMgt 21 }
diffServIpv6AceEntry OBJECT-TYPE
SYNTAX DiffServIpv6AceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry fo IPv6 ACE."
INDEX { diffServIpv6AceIndex }
::= { diffServIpv6AceTable 1 }
DiffServIpv6AceEntry ::= SEQUENCE
{
diffServIpv6AceIndex Integer32,
diffServIpv6AceType INTEGER,
diffServIpv6AceAccess INTEGER,
diffServIpv6AceSourceIpAddr OCTET STRING,
diffServIpv6AceSourceIpAddrPrefixLen Integer32,
diffServIpv6AceDestIpAddr OCTET STRING,
diffServIpv6AceDestIpAddrPrefixLen Integer32,
diffServIpv6AceDscp Integer32,
diffServIpv6AceStatus RowStatus
}
diffServIpv6AceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An index that uniquely identifies an entry in the IPv6 table."
::= { diffServIpv6AceEntry 1 }
diffServIpv6AceType OBJECT-TYPE
SYNTAX INTEGER {
standard(1),
extended(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified IP v6 ACE type. When the type of this entry is
modified, then this entry will be auto-unbound from the
diffServAclEntry and the not supporting field of this entry
will be set 0."
::= { diffServIpv6AceEntry 2 }
diffServIpv6AceAccess OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches this
ACE."
::= { diffServIpv6AceEntry 3 }
diffServIpv6AceSourceIpAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the source IPv6 address."
::= { diffServIpv6AceEntry 4 }
diffServIpv6AceSourceIpAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The length (in bits) associated with the source IPv6 address
prefix of this entry."
::= { diffServIpv6AceEntry 5 }
diffServIpv6AceDestIpAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the destination IPv6 address. This object may not be
modified if the associated diffServIpv6AceType object is equal
to standard(1)."
::= { diffServIpv6AceEntry 6 }
diffServIpv6AceDestIpAddrPrefixLen OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The length (in bits) associated with the destination IPv6
address prefix of this entry. This object may not be modified
if the associated diffServIpv6AceType object is equal to
standard(1)."
::= { diffServIpv6AceEntry 7 }
diffServIpv6AceDscp OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the DSCP value to match against. This object may not
be modified if the associated diffServIpv6AceType object is
equal to standard(1)."
::= { diffServIpv6AceEntry 9 }
diffServIpv6AceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object is used to create a new row or modify or delete
an existing row in this table. The status column has six
defined values:
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has the value
'active'); it is not available for use by the managed device,
though the agent has sufficient information to make it so
(the status column has the value 'notInService'); or, it is
not available for use by the managed device, and an attempt
to make it so would fail because the agent has insufficient
information (the state column has the value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServIpv6AceEntry 11 }
diffServArpAceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServArpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of diffServArpAceEntry."
::= { diffServMgt 23 }
diffServArpAceEntry OBJECT-TYPE
SYNTAX DiffServArpAceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for diffServArpAceTable."
INDEX { diffServArpAceIndex }
::= { diffServArpAceTable 1 }
DiffServArpAceEntry ::= SEQUENCE
{
diffServArpAceIndex Integer32,
diffServArpAceAction INTEGER,
diffServArpAcePktType INTEGER,
diffServArpAceSourceIpAddr IpAddress,
diffServArpAceSourceIpAddrBitmask IpAddress,
diffServArpAceDestIpAddr IpAddress,
diffServArpAceDestIpAddrBitmask IpAddress,
diffServArpAceSourceMacAddr OCTET STRING,
diffServArpAceSourceMacAddrBitmask OCTET STRING,
diffServArpAceDestMacAddr OCTET STRING,
diffServArpAceDestMacAddrBitmask OCTET STRING,
diffServArpAceLogStatus EnabledStatus,
diffServArpAceStatus RowStatus
}
diffServArpAceIndex OBJECT-TYPE
SYNTAX Integer32 (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The unique index of an ACE within an ACL."
::= { diffServArpAceEntry 1 }
diffServArpAceAction OBJECT-TYPE
SYNTAX INTEGER
{
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the action to be taken if a packet matches
this ACE. This object cannot not be configured when
the status of the entry, diffServArpAceStatus, is
active(1)."
::= { diffServArpAceEntry 2 }
diffServArpAcePktType OBJECT-TYPE
SYNTAX INTEGER
{
request(1),
response(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the packet type to be taken if a packet matches
this ACE. This object can not be configured when the
status of the entry, diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 3 }
diffServArpAceSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source ARP address. The packet's source
address is AND'ed with the value of
diffServArpAceSourceIpAddrBitmask and then compared
against the value of this object.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 4 }
diffServArpAceSourceIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source ARP address mask. The packet's
destination address is AND'ed with the value of
diffServArpAceSourceIpAddr and then compared against the
value of this object."
::= { diffServArpAceEntry 5 }
diffServArpAceDestIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address. The packet's
destination address is AND'ed with the value of
diffServArpAceDestIpAddrBitmask and then compared
against the value of this object."
::= { diffServArpAceEntry 6 }
diffServArpAceDestIpAddrBitmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination IP address mask."
::= { diffServArpAceEntry 7 }
diffServArpAceSourceMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit destination MAC address. The
specified source MAC of the packet. The packet's
source MAC address is AND'ed with the value of
aceArpSourceMacAddrBitmask and then compared against
the value of this object. This object cannot be
configured when the status of the entry,
diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 8 }
diffServArpAceSourceMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified source MAC address mask.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 9 }
diffServArpAceDestMacAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates the 48-bit destination MAC address.
The specified destination MAC of the packet.
The packet's destination MAC address is AND'ed with the
value of aceArpDestMacAddrBitmask and then compared
against the value of this object. This object cannot be
configured when the status of the entry,
diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 10 }
diffServArpAceDestMacAddrBitmask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The specified destination MAC address mask.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 11 }
diffServArpAceLogStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicates whether to log messages against the packets.
This object cannot be configured when the status of the
entry, diffServArpAceStatus, is active(1)."
::= { diffServArpAceEntry 12 }
diffServArpAceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.
The status column has six defined values:
- 'active', which indicates that the conceptual row is
available for use by the managed device;
- 'notInService', which indicates that the conceptual
row exists in the agent, but is unavailable for use by
the managed device (see NOTE below);
- 'notReady', which indicates that the conceptual row
exists in the agent, but is missing information
necessary in order to be available for use by the
managed device;
- 'createAndGo', which is supplied by a management
station wishing to create a new instance of a
conceptual row and to have its status automatically set
to active, making it available for use by the managed
device;
- 'createAndWait', which is supplied by a management
station wishing to create a new instance of a
conceptual row (but not make it available for use by
the managed device); and,
- 'destroy', which is supplied by a management station
wishing to delete all of the instances associated with
an existing conceptual row.
Whereas five of the six values (all except 'notReady') may
be specified in a management protocol set operation, only
three values will be returned in response to a management
protocol retrieval operation: 'notReady', 'notInService' or
'active'. That is, when queried, an existing conceptual row
has only three states: it is either available for use by
the managed device (the status column has value 'active');
it is not available for use by the managed device, though
the agent has sufficient information to make it so (the
status column has value 'notInService'); or, it is not
available for use by the managed device, and an attempt to
make it so would fail because the agent has insufficient
information (the state column has value 'notReady').
For a detailed description of this object, please refer to
SNMPv2-TC MIB."
::= { diffServArpAceEntry 13 }
diffServArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF DiffServArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of diffServArpEntry."
::= { diffServMgt 24 }
diffServArpEntry OBJECT-TYPE
SYNTAX DiffServArpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for diffServArpTable."
INDEX { diffServArpAclName }
::= { diffServArpTable 1 }
DiffServArpEntry ::= SEQUENCE
{
diffServArpAclName DisplayString
}
diffServArpAclName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The name of an ACL. Within a feature, a unique name is
used to identify the list to which the entry belongs
in the device."
::= { diffServArpEntry 1 }
diffServTcamMgt OBJECT IDENTIFIER ::= { diffServMgt 25 }
diffServTcamTotalPolicyControlEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of policy control entries."
::= { diffServTcamMgt 1 }
diffServTcamFreePolicyControlEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The free number of policy control entries."
::= { diffServTcamMgt 2 }
diffServTcamUtilization OBJECT-TYPE
SYNTAX Integer32(0..10000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCAM utilization in hundredths of a percent."
::= { diffServTcamMgt 3 }
diffServTcamEntriesUsedBySystem OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of policy control entries used by system."
::= { diffServTcamMgt 4 }
diffServTcamEntriesUsedByUser OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of policy control entries used by user."
::= { diffServTcamMgt 5 }
diffServTcamAllocation OBJECT-TYPE
SYNTAX INTEGER
{
default(0),
mac(1),
ipv4(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The mode of tcam allocation.
default(1): allocate one slice for MAC, one slice for IPv4, two slices for IPv6
mac(2): allocate two slices for MAC, one slice for IPv4, no slices for IPv6
ipv4(3): allocate one slice for MAC, three slices for IPv4, no slices for IPv6"
::= { diffServTcamMgt 6 }
diffServTcamPriority OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The priority of tcam"
::= { diffServTcamMgt 7 }
diffServTcamPriorityCtrl OBJECT IDENTIFIER ::= { diffServTcamMgt 8 }
diffServTcamPriorityCtrlPriority1 OBJECT-TYPE
SYNTAX INTEGER
{
mac(0),
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The first priority type of tcam rule"
::= { diffServTcamPriorityCtrl 1 }
diffServTcamPriorityCtrlPriority2 OBJECT-TYPE
SYNTAX INTEGER
{
mac(0),
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The second priority type of tcam rule"
::= { diffServTcamPriorityCtrl 2 }
diffServTcamPriorityCtrlPriority3 OBJECT-TYPE
SYNTAX INTEGER
{
mac(0),
ipv4(1),
ipv6(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The third priority type of tcam rule"
::= { diffServTcamPriorityCtrl 3 }
diffServTcamPriorityCtrlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
set(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for TcamPriority setting. When the
action is finshed whether successfully or not, or no action
is taken, the value of this object always is noAction(1)."
::= { diffServTcamPriorityCtrl 4 }
--
--qrlPortMgt
--qrl: Queue Rate Limit
--
qrlPortMgt OBJECT IDENTIFIER ::= { qosMgt 7 }
qrlPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF QueuerateLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for queue rate limit of each port."
::= { qrlPortMgt 1 }
qrlPortEntry OBJECT-TYPE
SYNTAX QueuerateLimitEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for queue rate limit of each port."
INDEX { qrlPortIndex, qrlPortQueueId }
::= { qrlPortTable 1 }
QueuerateLimitEntry ::= SEQUENCE
{
qrlPortIndex Integer32,
qrlPortQueueId Integer32,
qrlPortOutputLimitInKilo Integer32,
qrlPortOutputStatus EnabledStatus
}
qrlPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The normal port and the trunk member port (excluding trunk
port) interface of the portTable. The interface identified
by a particular value of this index is the same interface as
identified by the same value of ifIndex in the IF-MIB."
::= { qrlPortEntry 1 }
qrlPortQueueId OBJECT-TYPE
SYNTAX Integer32(0..7)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The queue ID is the ID of queue egress rate limit index for a
specified port."
::= { qrlPortEntry 2 }
qrlPortOutputLimitInKilo OBJECT-TYPE
SYNTAX Integer32(64..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the output rate limit. Its unit is kilobits per
second. For a 100 Mbps port, the range is from 64 to 100000.
For a 1000 Mbps port, the range is from 64 to 1000000."
::= { qrlPortEntry 3 }
qrlPortOutputStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to enabled(1) to start queue rate limit,
Set this variable to disabled(2) to stop queue rate limit."
DEFVAL { enabled }
::= { qrlPortEntry 4 }
--
-- securityMgt
--
-- Management for security, e.g. user security and port security.
privateVlanMgt OBJECT IDENTIFIER ::= { securityMgt 1 }
portSecurityMgt OBJECT IDENTIFIER ::= { securityMgt 2 }
radiusMgt OBJECT IDENTIFIER ::= { securityMgt 4 }
tacacsMgt OBJECT IDENTIFIER ::= { securityMgt 5 }
sshMgt OBJECT IDENTIFIER ::= { securityMgt 6 }
aclMgt OBJECT IDENTIFIER ::= { securityMgt 7 }
ipFilterMgt OBJECT IDENTIFIER ::= { securityMgt 9 }
userAuthMgt OBJECT IDENTIFIER ::= { securityMgt 10 }
dot1xMgt OBJECT IDENTIFIER ::= { securityMgt 11 }
aaaMgt OBJECT IDENTIFIER ::= { securityMgt 12 }
networkAccessMgt OBJECT IDENTIFIER ::= { securityMgt 13 }
macAuthMgt OBJECT IDENTIFIER ::= { securityMgt 14 }
webAuthMgt OBJECT IDENTIFIER ::= { securityMgt 15 }
dosMgt OBJECT IDENTIFIER ::= { securityMgt 16 }
portIsolationMgt OBJECT IDENTIFIER ::= { securityMgt 17 }
--
-- SYS_CPNT_COMMUNITY_PRIVATE_VLAN (use PVLAN_MGR API) start
privateVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This controls whether private VLAN is enabled."
::= { privateVlanMgt 1 }
privateVlanUplinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the list of uplink ports for private VLAN.
They should not overlap with privateVlanDownlinkPorts.
0 will be displayed if the privateVlanStatus is disabled.
You must enable the privateVlanStatus before setting this variable."
::= { privateVlanMgt 2 }
privateVlanDownlinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is the list of downlink ports for private VLAN.
They should not overlap with privateVlanUplinkPorts.
Multiple port setting is permitted.
0 will be displayed if the privateVlanStatus is disabled.
You must enable the privateVlanStatus before setting this variable."
::= { privateVlanMgt 3 }
privateVlanVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrivateVlanVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing private VLAN information on the
VLANs which currently exist."
::= { privateVlanMgt 4 }
privateVlanVlanEntry OBJECT-TYPE
SYNTAX PrivateVlanVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the private VLAN
information on the VLANs for a particular management
domain."
INDEX { privateVlanVlanIndex }
::= { privateVlanVlanTable 1 }
PrivateVlanVlanEntry ::= SEQUENCE
{
privateVlanVlanIndex Integer32,
privateVlanVlanType INTEGER,
privateVlanAssoicatedPrimaryVlan Integer32
}
privateVlanVlanIndex OBJECT-TYPE
SYNTAX Integer32(1..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The VLAN ID of this private VLAN."
::= { privateVlanVlanEntry 1 }
privateVlanVlanType OBJECT-TYPE
SYNTAX INTEGER
{
invalid(1),
primary(2),
isolated(3),
community(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The VLAN type as defined for Private VLAN feature.
Set the value to invalid(1) to destroy an entry. Set
other values to create an entry. If an index
already exists, set others to modifiy it. Note that a VLAN's
private VLAN type cannot be changed once it has
any port members."
::= { privateVlanVlanEntry 2 }
privateVlanAssoicatedPrimaryVlan OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN ID of the associated primary VLAN used for
the private VLAN feature if privateVlanVlanType has the
value of isolated(3), community(4). If privateVlanVlanType
has the value of primary(2), then this object has the value of 0.
Note that one isolated VLAN can only be associated
with one unique primary VLAN. One primary VLAN can only
be associated with one isolated VLAN.
One primary VLAN can be associated with multiple community VLANs;
one community VLAN can only be associated with one unique primary VLAN."
::= { privateVlanVlanEntry 3 }
--
-- Table for configuring secondary VLAN on private ports
--
privateVlanPrivatePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrivateVlanPrivatePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information on the configuration of
secondary VLANs on the device ports."
::= { privateVlanMgt 5 }
privateVlanPrivatePortEntry OBJECT-TYPE
SYNTAX PrivateVlanPrivatePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing information of the
configuration of secondary VLANs for each port. An entry
is created by the managed system for each interface which
can be configured as a private port for Private VLAN
feature."
INDEX { privateVlanPrivatePortIfIndex }
::= { privateVlanPrivatePortTable 1 }
PrivateVlanPrivatePortEntry ::= SEQUENCE
{
privateVlanPrivatePortIfIndex Integer32,
privateVlanPrivatePortSecondaryVlan Integer32
}
privateVlanPrivatePortIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as the ifIndex."
::= { privateVlanPrivatePortEntry 1 }
privateVlanPrivatePortSecondaryVlan OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The VLAN ID of the secondary VLAN configured on this
private port. A private port is a port that allows
ingress traffic of the secondary VLAN as well as
egress traffic of its associated primary VLAN, but
blocks the egress traffic of the isolated VLAN while
allowing the egress traffic of the community
or twoWayCommunity VLAN depending on the type of the
secondary VLAN.
Note that a port can join a secondary VLAN only after
this secondary VLAN has been associated with a primary
VLAN, i.e., the cpvlanVlanAssociatedPrimaryVlan has a
non-zero value. The default value of 0 for this object
means this port has not yet joined a secondary VLAN."
DEFVAL { 0 }
::= { privateVlanPrivatePortEntry 2 }
--
-- Table for remapping secondary VLAN to primary VLAN on promiscuous
-- ports for Private VLAN feature
--
privateVlanPromPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrivateVlanPromPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing secondary VLAN to primary VLAN remapping
information on ports of the device."
::= { privateVlanMgt 6 }
privateVlanPromPortEntry OBJECT-TYPE
SYNTAX PrivateVlanPromPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing secondary VLAN to primary
VLAN remapping information for each port.
An entry is created by the managed system for each interface
which can be configured as a promiscuous port for the
private VLAN feature."
INDEX { privateVlanPromPortIfIndex }
::= { privateVlanPromPortTable 1 }
PrivateVlanPromPortEntry ::= SEQUENCE
{
privateVlanPromPortIfIndex Integer32,
privateVlanPromPortPrimaryVlanId Integer32,
privateVlanPromPortSecondaryRemap OCTET STRING,
privateVlanPromPortSecondaryRemap2k OCTET STRING,
privateVlanPromPortSecondaryRemap3k OCTET STRING,
privateVlanPromPortSecondaryRemap4k OCTET STRING
}
privateVlanPromPortIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This is defined as ifIndex."
::= { privateVlanPromPortEntry 1 }
privateVlanPromPortPrimaryVlanId OBJECT-TYPE
SYNTAX Integer32(0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The primary VLAN ID of the promiscous port."
::= { privateVlanPromPortEntry 2 }
privateVlanPromPortSecondaryRemap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN in the
management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 0
through 7; the second octet to VLANs 8 through 15; etc.
The most significant bit of each octet corresponds to
the lowest value VlanIndexOrZero in that octet.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs."
::= { privateVlanPromPortEntry 3 }
privateVlanPromPortSecondaryRemap2k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 1024 through 2047
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 1024
through 1031; the second octet to VLANs 1032 through
1039; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095."
::= { privateVlanPromPortEntry 4 }
privateVlanPromPortSecondaryRemap3k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 2048 through 3071
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 2048
through 2055; the second octet to VLANs 2056 through
2063; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095."
::= { privateVlanPromPortEntry 5 }
privateVlanPromPortSecondaryRemap4k OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..128))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for
VLANs with VlanIndexOrZero values of 3072 through 4095
in the management domain on this port. The first octet
corresponds to VLANs with VlanIndexOrZero values of 3072
through 3079; the second octet to VLANs 3080 through
3087; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndexOrZero in
that octet.
Note that if the length of this string is less than
128 octets, any 'missing' octets are assumed to contain
the value zero. An NMS may omit any zero-valued octets
from the end of this string in order to reduce SetPDU
size, and the agent may also omit zero-valued trailing
octets, to reduce the size of GetResponse PDUs.
This object is only instantiated on devices which support
the range of VlanIndexOrZero up to 4095."
::= { privateVlanPromPortEntry 6 }
-- SYS_CPNT_COMMUNITY_PRIVATE_VLAN (use PVLAN_MGR API) end
privateVlanSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF PrivateVlanSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the settings for private VLAN Session."
::= { privateVlanMgt 8 }
privateVlanSessionEntry OBJECT-TYPE
SYNTAX PrivateVlanSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the privateVlanSession table."
INDEX { privateVlanSessionId }
::= { privateVlanSessionTable 1 }
PrivateVlanSessionEntry::= SEQUENCE
{
privateVlanSessionId INTEGER,
privateVlanSessionUplinkPorts PortList,
privateVlanSessionDownlinkPorts PortList,
privateVlanSessionStatus ValidStatus
}
privateVlanSessionId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The session ID that may specifiy certain entry in the table which contains private
VLAN session information."
::= { privateVlanSessionEntry 1 }
privateVlanSessionUplinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This is the list of uplink ports for a session of private VLAN. They should not
overlap with the privateVlanSessionPortDownlink of the same session, and they
also should not overlap with the privateVlanSessionPortUplink and the
privateVlanSessionPortDownlink of other session."
::= { privateVlanSessionEntry 2 }
privateVlanSessionDownlinkPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This is the list of downlink ports for a session of private VLAN. They should not
overlap with the privateVlanSessionPortUplink of the same session, and they also
should not overlap with the privateVlanSessionPortUplink and the
privateVlanSessionPortDownlink of other session."
::= { privateVlanSessionEntry 3 }
privateVlanSessionStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set this to valid(1) to create an entry. Sets this to
invalid(2) to destroy an entry."
::= { privateVlanSessionEntry 4 }
privateVlanUplinkToUplink OBJECT-TYPE
SYNTAX INTEGER
{
blocking(1),
forwarding(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets this to blocking(2) to deny the traffic of uplink
ports between different sessions. Set this to forwarding(1)
to allow the traffic of uplink ports between different
sessions."
::= { privateVlanMgt 9 }
portSecPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortSecPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port security(MAC binding) Table."
::= { portSecurityMgt 1 }
portSecPortEntry OBJECT-TYPE
SYNTAX PortSecPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of portSecPortTable."
INDEX { portSecPortIndex }
::= { portSecPortTable 1 }
PortSecPortEntry ::= SEQUENCE
{
portSecPortIndex Integer32,
portSecPortStatus EnabledStatus,
portSecAction INTEGER,
portSecMaxMacCount Integer32
}
portSecPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { portSecPortEntry 1 }
portSecPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable port security and set disabled(2) to
disable port security."
::= { portSecPortEntry 2 }
portSecAction OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
trap(2),
shutdown(3),
trapAndShutdown(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The corresponding actions that will take place when a
port is under intrusion, when this variable is set to
none(1), no action will be performed, when this variable is
set to trap(2), a swPortSecurityTrap trap will be sent,
when this variable is set to shutdown(3), the port will
shutdown, when this variable is set to
trapAndShutdown(4), a swPortSecurityTrap will be sent
and the port will shutdown."
::= { portSecPortEntry 3 }
portSecMaxMacCount OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximun number of MAC addresses that will be learned and locked.
When we change the value of this variable, if the
portSecPortStatus is enabled, we will discard all secure MAC
and begin to learn again, until the number of MAC has reached
this value, and only the secure MAC addresses can enter
this port. If the portSecPortStatus is disabled, we will begin
to learn the MAC, and auto enabled the portSecPortStatus when
the MAC has reached this value."
::= { portSecPortEntry 4 }
--
-- radiusMgt
--
-- Management for Remote Authentication Dial-In User Service (RADIUS).
--SYS_ADPT_MAX_NBR_OF_RADIUS_SERVERS=1: single server
--SYS_ADPT_MAX_NBR_OF_RADIUS_SERVERS>1: multiple server
radiusServerGlobalAuthPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Aauthentication port number for RADIUS server.
When specified radius server do not set
aauthentication port number, this value is used."
::= { radiusMgt 1 }
radiusServerGlobalAcctPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Accounting port number of RADIUS server.
When specified radius server do not set
accounting port number, this value is used."
::= { radiusMgt 2 }
radiusServerGlobalKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string.
When specified radius server do not set
key, this this value is used."
::= { radiusMgt 3 }
radiusServerGlobalRetransmit OBJECT-TYPE
SYNTAX INTEGER (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Maximum number of retransmissions for RADIUS.
When specified radius server do not set
maximum number of retransmissions, this value is used."
::= { radiusMgt 4 }
radiusServerGlobalTimeout OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout for RADIUS.
When specified radius server do not set
timeout, this value is used."
::= { radiusMgt 5 }
--radiusServerTable
radiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for RADIUS server."
::= { radiusMgt 7 }
radiusServerEntry OBJECT-TYPE
SYNTAX RadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for radiusServerTable."
INDEX { radiusServerIndex }
::= { radiusServerTable 1 }
RadiusServerEntry ::= SEQUENCE
{
radiusServerIndex Integer32,
radiusServerAddress IpAddress,
radiusServerAuthPortNumber Integer32,
radiusServerAcctPortNumber Integer32,
radiusServerKey DisplayString,
radiusServerRetransmit Integer32,
radiusServerTimeout Integer32,
radiusServerStatus ValidStatus
}
radiusServerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The RADIUS server index in the table."
::= { radiusServerEntry 1 }
radiusServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP address of a RADIUS server."
::= { radiusServerEntry 2 }
radiusServerAuthPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Authentication port number of RADIUS server."
::= { radiusServerEntry 3 }
radiusServerAcctPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Accounting port number of RADIUS server."
::= { radiusServerEntry 4 }
radiusServerKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key for RADIUS. This variable can only be written.
When this variable is read, it always returns a
zero-length string."
::= { radiusServerEntry 5 }
radiusServerRetransmit OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout for RADIUS."
::= { radiusServerEntry 6 }
radiusServerTimeout OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Timeout for RADIUS."
::= { radiusServerEntry 7 }
radiusServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { radiusServerEntry 8 }
--
-- tacacsMgt
--
-- Management for Terminal Access Controller Access Control System plus (TACACS+).
-- Global server setting
tacacsPlusServerGlobalPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "TCP port number of TACACS+ server.
When specified TACACS+ server do not set
TCP port number, this this value is used."
::= { tacacsMgt 2 }
tacacsPlusServerGlobalKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The encryption key used to encrpt the traffic between client and
TACACS+ server. Do not use blank spaces in the string. This variable
can only be set. When this variable is read, it always returns a
zero-length string.When specified TACACS+ server do not set
the encryption key , this this value is used."
::= { tacacsMgt 3 }
tacacsPlusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF TacacsPlusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for TACACS+ server."
::= { tacacsMgt 4 }
tacacsPlusServerEntry OBJECT-TYPE
SYNTAX TacacsPlusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for tacacsPlusServerTable."
INDEX { tacacsPlusServerIndex }
::= { tacacsPlusServerTable 1 }
TacacsPlusServerEntry ::= SEQUENCE
{
tacacsPlusServerIndex Integer32,
tacacsPlusServerAddress IpAddress,
tacacsPlusServerPortNumber Integer32,
tacacsPlusServerKey DisplayString,
tacacsPlusServerStatus ValidStatus
}
tacacsPlusServerIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "TACACS+ server index."
::= { tacacsPlusServerEntry 1 }
tacacsPlusServerAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP address of a TACACS+ server."
::= { tacacsPlusServerEntry 2 }
tacacsPlusServerPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "TCP port number of a TACACS+ server."
::= { tacacsPlusServerEntry 3 }
tacacsPlusServerKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The encryption key used to encrpt the traffic between client and
TACACS+ server. Do not use blank spaces in the string. This
variable can only be set. When this variable is read, it always
returns a zero-length string."
::= { tacacsPlusServerEntry 4 }
tacacsPlusServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { tacacsPlusServerEntry 8 }
--
-- sshMgt
--
-- Management for Secure Shell Configuration
sshServerStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of Secure Shell Server. Set this value to
enabled(1) to enable SSH server, set this value to
disabled(2) to disable the SSH server."
::= { sshMgt 1 }
sshServerMajorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The major version of the SSH Server."
::= { sshMgt 2 }
sshServerMinorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The minor version of the SSH Server."
::= { sshMgt 3 }
sshTimeout OBJECT-TYPE
SYNTAX INTEGER(1..120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time interval that the router waits for the SSH
client to respond. The range is 1-120."
::= { sshMgt 4 }
sshAuthRetries OBJECT-TYPE
SYNTAX INTEGER(1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of attempts after which the interface is reset.
The range is 1-5."
::= { sshMgt 5 }
sshConnInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshConnInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for Secure Shell Connection."
::= { sshMgt 6 }
sshConnInfoEntry OBJECT-TYPE
SYNTAX SshConnInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for sshConnInfoTable."
INDEX { sshConnID }
::= { sshConnInfoTable 1 }
SshConnInfoEntry ::= SEQUENCE
{
--both sshv1 & sshv2 start
sshConnID Integer32,
sshConnMajorVersion Integer32,
sshConnMinorVersion Integer32,
sshConnStatus INTEGER,
--both sshv1 & sshv2 end
--sshv1 only start
sshConnEncryptionType INTEGER,
--sshv1 only end
--both sshv1 & sshv2 start
sshConnUserName DisplayString,
sshDisconnect INTEGER,
--both sshv1 & sshv2 end
--sshv2 only start
sshConnEncryptionTypeStr DisplayString
--sshv2 only end
}
--both sshv1 & sshv2 start
sshConnID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The connection ID of the Secure Shell Connection."
::= { sshConnInfoEntry 1 }
sshConnMajorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SSH major version."
::= { sshConnInfoEntry 2 }
sshConnMinorVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SSH minor version."
::= { sshConnInfoEntry 3 }
sshConnStatus OBJECT-TYPE
SYNTAX INTEGER
{
negotiationStart(1),
authenticationStart(2),
sessionStart(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SSH connection State. negotiationStart(1) means the
SSH is in its negotiation start state, authenticationStart(2)
means the SSH is in authentication start state, sessionStart(3)
means the SSH is in session start State."
::= { sshConnInfoEntry 5 }
--both sshv1 & sshv2 end
--both sshv1 & sshv2 start
sshConnUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The user name of the connection."
::= { sshConnInfoEntry 6 }
sshDisconnect OBJECT-TYPE
SYNTAX INTEGER
{
noDisconnect(1),
disconnect(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the variable to disconnect the connection,
noDisconnect(1) will always be obtained when reading this variable."
::= { sshConnInfoEntry 7 }
--both sshv1 & sshv2 end
--sshv2 only start
sshConnEncryptionTypeStr OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The encryption type of the SSH."
::= { sshConnInfoEntry 8 }
sshKeySize OBJECT-TYPE
SYNTAX INTEGER(512..896)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The SSH server key size."
::= { sshMgt 7 }
sshRsaHostKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 1."
::= { sshMgt 8 }
sshRsaHostKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 2."
::= { sshMgt 9 }
sshRsaHostKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 3."
::= { sshMgt 10 }
sshRsaHostKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 4."
::= { sshMgt 11 }
sshRsaHostKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 5."
::= { sshMgt 12 }
sshRsaHostKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 6."
::= { sshMgt 13 }
sshRsaHostKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 7."
::= { sshMgt 14 }
sshRsaHostKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA host key segment 8."
::= { sshMgt 15 }
sshDsaHostKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 1."
::= { sshMgt 16 }
sshDsaHostKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 2."
::= { sshMgt 17 }
sshDsaHostKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 3."
::= { sshMgt 18 }
sshDsaHostKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 4."
::= { sshMgt 19 }
sshDsaHostKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 5."
::= { sshMgt 20 }
sshDsaHostKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 6."
::= { sshMgt 21 }
sshDsaHostKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 7."
::= { sshMgt 22 }
sshDsaHostKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA host key segment 8."
::= { sshMgt 23 }
sshHostKeyGenAction OBJECT-TYPE
SYNTAX INTEGER
{
noGen(1),
genRsaKey(2),
genDsaKey(3),
genBothKeys(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable is for host key generating.
For the set behavior:
Set it to genRsaKey(2) to generate the RSA host key,
and to genDsaKey(3) to generate the DSA host key,
if genBothKeys(4) is set, both RSA and DSA host key are
generated.
For the get behavior:
You will get genRsaKey(2), genDsaKey(3) or
genBothKeys(4) when the key gen action is in progress.
otherwise, you will get noGen(1)."
::= { sshMgt 24 }
sshHostKeyGenStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
success(2),
failure(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of the last KeyGen status.
if no key gen action has been performed.
you will get unknown(1) status."
::= { sshMgt 25 }
sshHostKeySaveAction OBJECT-TYPE
SYNTAX INTEGER
{
noSave(1),
save(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To save host key from memory to flash.
For the set behavior:
Set it to save(2) to perform the save operation.
For the get behavior:
You will get save(1) when the save action is in progress.
Otherwise, you will get noSave(1)."
::= { sshMgt 26 }
sshHostKeySaveStatus OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
success(2),
failure(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The result of the last savekey status.
If no save action has been performed,
you will get unknown(1) status."
::= { sshMgt 27 }
sshHostKeyDelAction OBJECT-TYPE
SYNTAX INTEGER
{
noDel(1),
delRsaKey(2),
delDsaKey(3),
delBothKeys(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To delete the host key.
For the set behavior:
Set it to delRsaKey(2) to delete the RSA host key,
to delDsaKey(3) to delete the DSA host key,
or to delBothKeys(4) to delete both RSA and DSA host key.
For the get behavior:
You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
when the delete operation is in progress.
Otherwise, you will get noDel(1)."
::= { sshMgt 28 }
sshUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF SshUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of all of sshUserEntry."
::= { sshMgt 29 }
sshUserEntry OBJECT-TYPE
SYNTAX SshUserEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row for sshUserTable."
INDEX { IMPLIED sshUserName}
::= { sshUserTable 1 }
SshUserEntry ::= SEQUENCE
{
sshUserName DisplayString,
sshUserRsaKey1 KeySegment,
sshUserRsaKey2 KeySegment,
sshUserRsaKey3 KeySegment,
sshUserRsaKey4 KeySegment,
sshUserRsaKey5 KeySegment,
sshUserRsaKey6 KeySegment,
sshUserRsaKey7 KeySegment,
sshUserRsaKey8 KeySegment,
sshUserDsaKey1 KeySegment,
sshUserDsaKey2 KeySegment,
sshUserDsaKey3 KeySegment,
sshUserDsaKey4 KeySegment,
sshUserDsaKey5 KeySegment,
sshUserDsaKey6 KeySegment,
sshUserDsaKey7 KeySegment,
sshUserDsaKey8 KeySegment,
sshUserKeyDelAction INTEGER
}
sshUserName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "User Name."
::= { sshUserEntry 1 }
sshUserRsaKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 1."
::= { sshUserEntry 2 }
sshUserRsaKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 2."
::= { sshUserEntry 3 }
sshUserRsaKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 3."
::= { sshUserEntry 4 }
sshUserRsaKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 4."
::= { sshUserEntry 5 }
sshUserRsaKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 5."
::= { sshUserEntry 6 }
sshUserRsaKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 6."
::= { sshUserEntry 7 }
sshUserRsaKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 7."
::= { sshUserEntry 8 }
sshUserRsaKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The RSA user key segment 8."
::= { sshUserEntry 9 }
sshUserDsaKey1 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 1."
::= { sshUserEntry 10 }
sshUserDsaKey2 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 2."
::= { sshUserEntry 11 }
sshUserDsaKey3 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 3."
::= { sshUserEntry 12 }
sshUserDsaKey4 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 4."
::= { sshUserEntry 13 }
sshUserDsaKey5 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 5."
::= { sshUserEntry 14 }
sshUserDsaKey6 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 6."
::= { sshUserEntry 15 }
sshUserDsaKey7 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 7."
::= { sshUserEntry 16 }
sshUserDsaKey8 OBJECT-TYPE
SYNTAX KeySegment
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DSA user key segment 8."
::= { sshUserEntry 17 }
sshUserKeyDelAction OBJECT-TYPE
SYNTAX INTEGER
{
noDel(1),
delRsaKey(2),
delDsaKey(3),
delBothKeys(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To delete the user key.
For the set behavior:
Set it to delRsaKey(2) to delete the RSA user key,
to delDsaKey(3) to delete the DSA user key,
or to delBothKeys(4) to delete both RSA and DSA user key.
For the get behavior:
You will get delRsaKey(2), delDsaKey(3) or delBothKeys(4)
when the delete operation is in progress.
Otherwise, you will get noDel(1)."
::= { sshUserEntry 18 }
sshRsaHostKeySHA1FingerPrint OBJECT-TYPE
SYNTAX DisplayString(SIZE(65))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SHA1 finger print of the RSA host key."
::= { sshMgt 30 }
sshRsaHostKeyMD5FingerPrint OBJECT-TYPE
SYNTAX DisplayString(SIZE(47))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MD5 finger print of RSA host key."
::= { sshMgt 31 }
sshDsaHostKeySHA1FingerPrint OBJECT-TYPE
SYNTAX DisplayString(SIZE(65))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The SHA1 finger print of the DSA host key."
::= { sshMgt 32 }
sshDsaHostKeyMD5FingerPrint OBJECT-TYPE
SYNTAX DisplayString(SIZE(47))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The MD5 finger print of the DSA host key."
::= { sshMgt 33 }
--sshv2 only end
--
-- aaaMgt
--
aaaMethodTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the settings needed for accounting."
::= { aaaMgt 1 }
aaaMethodEntry OBJECT-TYPE
SYNTAX AaaMethodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the aaaMethodTable."
INDEX { aaaMethodIndex }
::= { aaaMethodTable 1 }
AaaMethodEntry ::= SEQUENCE {
aaaMethodIndex Integer32,
aaaMethodName DisplayString,
aaaMethodGroupName DisplayString,
aaaMethodMode INTEGER,
aaaMethodStatus ValidStatus,
aaaMethodClientType INTEGER
}
aaaMethodIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the index for the entry."
::= { aaaMethodEntry 1 }
aaaMethodName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name for the method."
::= { aaaMethodEntry 2 }
aaaMethodGroupName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name for the server to use, pointing to aaaRadiusGroupName
or aaaTacacsPlusGroupName."
::= { aaaMethodEntry 3 }
aaaMethodMode OBJECT-TYPE
SYNTAX INTEGER
{
start-stop(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "start-stop(1),sends a 'start' accounting notice at the beginning of a process and
a 'stop' accounting notice at the end of a process. The 'start' accounting record
is sent in the background. The requested user process begins regardless of whether or not
the 'start' accounting notice was received by the accounting server."
::= { aaaMethodEntry 4 }
aaaMethodStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set to 1 to initiate the aaaMethodTable, 2 to destroy the table."
::= { aaaMethodEntry 5 }
aaaMethodClientType OBJECT-TYPE
SYNTAX INTEGER
{
dot1x(1), exec(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "dot1x(1): Provides accounting service for 802.1x activity;
exec(2): Provides accounting service for EXEC connection
such as Telnet, SSH or console."
::= { aaaMethodEntry 6 }
aaaRadiusGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaRadiusGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Uses a subset of RADIUS servers for accounting as defined by the server group"
::= { aaaMgt 2 }
aaaRadiusGroupEntry OBJECT-TYPE
SYNTAX AaaRadiusGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of aaaRadiusGroupEntry."
INDEX { aaaRadiusGroupIndex }
::= { aaaRadiusGroupTable 1 }
AaaRadiusGroupEntry ::= SEQUENCE
{
aaaRadiusGroupIndex Integer32,
aaaRadiusGroupServerBitMap OCTET STRING,
aaaRadiusGroupName DisplayString,
aaaRadiusGroupStatus ValidStatus
}
aaaRadiusGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the index for the entry."
::= { aaaRadiusGroupEntry 1 }
aaaRadiusGroupServerBitMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Identifies which RADIUS sever to use, each bit points to each radius server.
80 (1000 0000) point to radius server 1, C0 (11000000) points to radius 1 and radius 2."
::= { aaaRadiusGroupEntry 2 }
aaaRadiusGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Uses a subset of servers for accounting as
defined by the server group. The same name as aaaTacasPlusGroupName is not allowed."
::= { aaaRadiusGroupEntry 3 }
aaaRadiusGroupStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table."
::= { aaaRadiusGroupEntry 4 }
aaaTacacsPlusGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaTacacsPlusGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Uses a subset of TACACS+ servers for accounting as defined by the server group"
::= { aaaMgt 3 }
aaaTacacsPlusGroupEntry OBJECT-TYPE
SYNTAX AaaTacacsPlusGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of aaaTacacsPlusGroupEntry."
INDEX { aaaTacacsPlusGroupIndex }
::= { aaaTacacsPlusGroupTable 1 }
AaaTacacsPlusGroupEntry ::= SEQUENCE
{
aaaTacacsPlusGroupIndex Integer32,
aaaTacacsPlusGroupServerBitMap OCTET STRING,
aaaTacacsPlusGroupName DisplayString,
aaaTacacsPlusGroupStatus ValidStatus
}
aaaTacacsPlusGroupIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the index for the entry."
::= { aaaTacacsPlusGroupEntry 1 }
aaaTacacsPlusGroupServerBitMap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Identifies which TACACS+ sever to use."
::= { aaaTacacsPlusGroupEntry 2 }
aaaTacacsPlusGroupName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Uses a subset of servers for accounting as
defined by the server group. We can't have the same name as aaaRadiusGroupName"
::= { aaaTacacsPlusGroupEntry 3 }
aaaTacacsPlusGroupStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table."
::= { aaaTacacsPlusGroupEntry 4 }
aaaUpdate OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the periodic interim accounting records to be sent
to the accounting server and periodic intervals to send accounting update records(in minutes)."
::= { aaaMgt 4 }
aaaAccountTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaAccountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies an interface or a set of interfaces that the
accounting method list will be applied to."
::= { aaaMgt 5 }
aaaAccountEntry OBJECT-TYPE
SYNTAX AaaAccountEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of aaaAccountTable."
INDEX { aaaAccountIfIndex }
::= { aaaAccountTable 1 }
AaaAccountEntry ::= SEQUENCE {
aaaAccountIfIndex Integer32,
aaaAccountMethodName DisplayString,
aaaAccountProtocol INTEGER,
aaaAccountStatus ValidStatus
}
aaaAccountIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Defined as the ifIndex"
::= { aaaAccountEntry 1 }
aaaAccountMethodName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default."
::= { aaaAccountEntry 2 }
aaaAccountProtocol OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Get the protocol type of a list method to know which server (RADIUS or TACACS+) is in use."
::= { aaaAccountEntry 3 }
aaaAccountStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set to 1 to initiate the aaaRadiusGroupTable, 2 to destroy the table."
::= { aaaAccountEntry 4 }
aaaAccExecTable OBJECT-TYPE
SYNTAX SEQUENCE OF AaaAccExecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies an interface or a set of interfaces that the
accounting method list will be applied to."
::= { aaaMgt 9 }
aaaAccExecEntry OBJECT-TYPE
SYNTAX AaaAccExecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of aaaAccExecTable."
INDEX { aaaAccExecIndex }
::= { aaaAccExecTable 1 }
AaaAccExecEntry ::= SEQUENCE {
aaaAccExecIndex INTEGER,
aaaAccExecMethodName DisplayString
}
aaaAccExecIndex OBJECT-TYPE
SYNTAX INTEGER
{
console(1), vty(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The method of accessing CLI management."
::= { aaaAccExecEntry 1 }
aaaAccExecMethodName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Specifies the name of the list of accounting methods to use.
If no method name is specified, the system uses the default."
::= { aaaAccExecEntry 2 }
--
--userAuthMgt
--
userAuthEnablePassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enable password or delete enable password. NULL is used to
delete the enable password. The password is starting with
alphanumeric."
::= { userAuthMgt 3 }
userAuthMethod OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
localradius(2),
localradiustacacs(3),
localtacacs(4),
localtacacsradius(5),
radius(6),
radiuslocal(7),
radiuslocaltacacs(8),
radiustacacs(9),
radiustacacslocal(10),
tacacs(11),
tacacslocal(12),
tacacslocalradius(13),
tacacsradius(14),
tacacsradiuslocal(15)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set user authencation method for system."
::= { userAuthMgt 4 }
userAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF UserAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for creating the new user."
::= { userAuthMgt 5 }
userAuthEntry OBJECT-TYPE
SYNTAX UserAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries in this table correspond to the users entries in system."
INDEX { userAuthUserName }
::= { userAuthTable 1 }
UserAuthEntry ::=
SEQUENCE {
userAuthUserName
DisplayString,
userAuthPassword
DisplayString,
userAuthPrivilege
Integer32,
userAuthPublicKey
DisplayString,
userAuthStatus
Integer32
}
userAuthUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the user. The user name is starting with alphanumeric."
::= { userAuthEntry 1 }
userAuthPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the user password. zero length input will set the user enrty
without password. If the user is not exist, it will create the user
with the giving password and privilege 0. The password is starting
with alphanumeric."
::= { userAuthEntry 2 }
userAuthPrivilege OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the user level. If the user is not exist, it will create
the user with the giving privilege with none password. Privilege 15 is
maximum privilege that only can be applied to system administrator."
::= { userAuthEntry 3 }
userAuthPublicKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"User public key, the value can be 'RSA' or 'DSA' or 'Both' or 'None'."
::= { userAuthEntry 4 }
userAuthStatus OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This node is used to create the user entry by '1' and to delete one
user entry by '0'."
::= { userAuthEntry 5 }
aclAttachCtlMgt OBJECT IDENTIFIER ::= { aclMgt 13 }
aclAttachCtlIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Index for attachment control. Specifies the ACL as the target
to relate with the IP ACE, the MAC ACE or IPv6 ACE. The ACL
identified by a particular value of this index is associated
with the same aclEntry as identified by the same value of
aclIndex."
::= { aclAttachCtlMgt 1 }
aclAttachCtlAceType OBJECT-TYPE
SYNTAX INTEGER
{
noType(0),
macAce(1),
ipAce(2),
ipv6Ace(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Type for attachment control. Specifies the type of
aclAttachCtlAceIndex to relate with the aclAttachCtlIndex.
When the type is macAce(1), the index of aclAceIndexList
is the aclMacAceEntry. When the type is ipAce(2), the index
of aclAceIndexList is the aclIpAceEntry. When the type is
ipv6Ace(3), the index of aclAceIndexList is the
aclIpv6AceEntry."
::= { aclAttachCtlMgt 2 }
aclAttachCtlAceIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Index for attachment control. Specifies the ACE to relate with
the aclAttachCtlIndex. When aclAttachCtlAceType is macAce(1),
the value of aclAttachCtlIndex is the diffServMacAceEntry. When
aclAttachCtlAceType is ipAce(2), the value of aclAttachCtlIndex
is the diffServIpAceEntry. When aclAttachCtlAceType is
ipv6Ace(3), the value of aclAttachCtlIndex is the
diffServIpv6AceEntry."
::= { aclAttachCtlMgt 3 }
aclAttachCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
attach(2),
detach(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for attachment control. When setting this object to
attach(2) to begin the attaching operation, a particular ACE
is attached to a particular ACL. When setting this object to
detach(3) to begin the not attached operation, then a
particular ACE is not attached to a particular ACL. When the
action is finshed whether successfully or not, or no action
is taken, the value of this object always is noAction(1), The
value of a particular ACL is specified in the
aclAttachCtlAceType and aclAttachCtlAceIndex."
::= { aclAttachCtlMgt 4 }
--
-- ipFilterMgt
--
--ipFilterSnmpInetTable
ipFilterSnmpInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpFilterSnmpInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP address entries."
::= { ipFilterMgt 12 }
ipFilterSnmpInetEntry OBJECT-TYPE
SYNTAX IpFilterSnmpInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes an IP address range which the system
will allow to connect to this device through SNMP."
INDEX { ipFilterSnmpInetAddressType,
IMPLIED ipFilterSnmpInetAddressStart}
::= { ipFilterSnmpInetTable 1 }
IpFilterSnmpInetEntry ::= SEQUENCE {
ipFilterSnmpInetAddressType InetAddressType,
ipFilterSnmpInetAddressStart InetAddress,
ipFilterSnmpInetAddressEnd InetAddress,
ipFilterSnmpInetStatus ValidStatus
}
ipFilterSnmpInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The type of IP address filter.
Only supports IPv4 and IPv6 address types."
::= { ipFilterSnmpInetEntry 1 }
ipFilterSnmpInetAddressStart OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterSnmpInetEntry 2 }
ipFilterSnmpInetAddressEnd OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterSnmpInetEntry 3 }
ipFilterSnmpInetStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ipFilterSnmpInetEntry 4 }
--ipFilterHttpInetTable
ipFilterHttpInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpFilterHttpInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP address entries."
::= { ipFilterMgt 13 }
ipFilterHttpInetEntry OBJECT-TYPE
SYNTAX IpFilterHttpInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes an IP address range which the system
will allow to connect to this device through SNMP."
INDEX { ipFilterHttpInetAddressType,
IMPLIED ipFilterHttpInetAddressStart }
::= { ipFilterHttpInetTable 1 }
IpFilterHttpInetEntry ::= SEQUENCE {
ipFilterHttpInetAddressType InetAddressType,
ipFilterHttpInetAddressStart InetAddress,
ipFilterHttpInetAddressEnd InetAddress,
ipFilterHttpInetStatus ValidStatus
}
ipFilterHttpInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The type of IP address filter .
Only supports IPv4 and IPv6 address types."
::= { ipFilterHttpInetEntry 1 }
ipFilterHttpInetAddressStart OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterHttpInetEntry 2 }
ipFilterHttpInetAddressEnd OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterHttpInetEntry 3 }
ipFilterHttpInetStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ipFilterHttpInetEntry 4 }
--ipFilterTelnetInetTable
ipFilterTelnetInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpFilterTelnetInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of IP address entries."
::= { ipFilterMgt 14 }
ipFilterTelnetInetEntry OBJECT-TYPE
SYNTAX IpFilterTelnetInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry includes an IP address range which the system
will allow them to connect to this device through SNMP."
INDEX { ipFilterTelnetInetAddressType,
IMPLIED ipFilterTelnetInetAddressStart }
::= { ipFilterTelnetInetTable 1 }
IpFilterTelnetInetEntry ::= SEQUENCE {
ipFilterTelnetInetAddressType InetAddressType,
ipFilterTelnetInetAddressStart InetAddress,
ipFilterTelnetInetAddressEnd InetAddress,
ipFilterTelnetInetStatus ValidStatus
}
ipFilterTelnetInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The type of IP address filter .
Only supports IPv4 and IPv6 address types."
::= { ipFilterTelnetInetEntry 1 }
ipFilterTelnetInetAddressStart OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterTelnetInetEntry 2 }
ipFilterTelnetInetAddressEnd OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterTelnetInetEntry 3 }
ipFilterTelnetInetStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ipFilterTelnetInetEntry 4 }
ipFilterAllClientCtl OBJECT IDENTIFIER ::= { ipFilterMgt 15 }
ipFilterAllClientCtlInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The type of IP address filter. Only supports IPv4 and IPv6
address types."
::= { ipFilterAllClientCtl 1 }
ipFilterAllClientCtlInetAddressStart OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The start IP address."
::= { ipFilterAllClientCtl 2 }
ipFilterAllClientCtlInetAddressEnd OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The end IP address."
::= { ipFilterAllClientCtl 3 }
ipFilterAllClientCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
create(2),
destroy(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for IP filter control. Set this object to create(2) to
create entries in the ipFilterSnmpInetTable,
ipFilterHttpInetTable and ipFilterTelnetInetTable. Set this
object to destroy(3) to destroy specified entries in the
ipFilterSnmpInetTable, ipFilterHttpInetTable and
ipFilterTelnetInetTable. When the action is finshed, whether
successfully or not, or no action is taken, the value of this
object is always noAction(1)."
::= { ipFilterAllClientCtl 4 }
--
-- dot1xMgt
--
-- The extension table of dot1xAuthConfigTable
dot1xAuthConfigExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1xAuthConfigExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The extension table of dot1xAuthConfigTable."
::= { dot1xMgt 1 }
dot1xAuthConfigExtEntry OBJECT-TYPE
SYNTAX Dot1xAuthConfigExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry of dot1xAuthConfigExtTable."
AUGMENTS { dot1xAuthConfigEntry }
::= { dot1xAuthConfigExtTable 1 }
Dot1xAuthConfigExtEntry ::= SEQUENCE
{
dot1xAuthConfigExtOperMode INTEGER,
dot1xAuthConfigExtMultiHostMaxCnt Integer32,
dot1xAuthConfigExtPortIntrusionAction INTEGER
}
dot1xAuthConfigExtOperMode OBJECT-TYPE
SYNTAX INTEGER
{
singleHost(1),
multiHost(2),
macBasedAuth(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The operation mode of dot1x port which allows host
connection to 802.1x-authorized ports."
::= { dot1xAuthConfigExtEntry 1 }
dot1xAuthConfigExtMultiHostMaxCnt OBJECT-TYPE
SYNTAX Integer32(1..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of hosts when the
dot1xAuthConfigExtOperMode is multiHost(2). When the
operation Mode is singleHost(1), we can ignore this
variables."
DEFVAL { 5 }
::= { dot1xAuthConfigExtEntry 2 }
dot1xAuthConfigExtPortIntrusionAction OBJECT-TYPE
SYNTAX INTEGER
{
block-traffic(1),
guest-vlan(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Responses to intrusion when the authentication is failed;
block-traffic(1) means that to block traffic when the authentication is failed and
guest-vlan(2) means that to join to a guest VLAN when the authentication is failed."
::= { dot1xAuthConfigExtEntry 3 }
dot1xEapolPassThrough OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "When this variable is enabled(1), EAPOL frames will
be forwarded to all ports where the Spanning Tree
status is forwarding. When this variable is
disabled(2), EAPOL frames will be discarded. EAPOL
Pass-Through operates when the global status of
802.1X is disabled."
DEFVAL { disabled }
::= { dot1xMgt 3 }
--
-- networkAccessPortTable
--
networkAccessPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetworkAccessPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the information of network access about every port."
::= { networkAccessMgt 2 }
networkAccessPortEntry OBJECT-TYPE
SYNTAX NetworkAccessPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the networkAccessPort table."
INDEX { networkAccessPortPortIndex }
::= { networkAccessPortTable 1 }
NetworkAccessPortEntry ::= SEQUENCE
{
networkAccessPortPortIndex Integer32,
networkAccessPortDynamicVlan EnabledStatus,
networkAccessPortMaxMacCount INTEGER,
networkAccessPortMode EnabledStatus,
networkAccessPortMacFilter INTEGER,
networkAccessPortGuestVlan INTEGER,
networkAccessPortLinkDetectionStatus EnabledStatus,
networkAccessPortLinkDetectionMode INTEGER,
networkAccessPortLinkDetectionAciton INTEGER,
networkAccessPortDynamicQos EnabledStatus
}
networkAccessPortPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of the
portTable. The interface identified by a particular value of this port
index is the same interface identified by the same value of
ifIndex in the IF-MIB."
::= { networkAccessPortEntry 1 }
networkAccessPortDynamicVlan OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets enabled(1) to enable dynamic VLAN assigment and
sets disabled(2) to disable dynamic VLAN assigment."
::= { networkAccessPortEntry 2 }
networkAccessPortMaxMacCount OBJECT-TYPE
SYNTAX INTEGER (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the maximum number of authenticated MAC address."
::= { networkAccessPortEntry 3 }
networkAccessPortMode OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the secure port mode. enabled(1) means that Mac address
authentication is used and disabled(2) means that the authentication is disabled."
::= { networkAccessPortEntry 4 }
networkAccessPortMacFilter OBJECT-TYPE
SYNTAX INTEGER (0..64)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the MAC filter ID, Set this variable to zero to
disable MAC filter."
::= { networkAccessPortEntry 5 }
networkAccessPortGuestVlan OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the guest VLAN ID. To disable the VLAN, set the value to 0."
::= { networkAccessPortEntry 6 }
networkAccessPortLinkDetectionStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this object to enabled(1) to enable link detection.
Set this object to disabled(2) to disable link detection."
::= { networkAccessPortEntry 7 }
networkAccessPortLinkDetectionMode OBJECT-TYPE
SYNTAX INTEGER
{
linkUp(1),
linkDown(2),
linkUpDown(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the detection event for a port. Set this object
to linkUp(1) to detect a link-up event. Set this object
to linkDown(2) to detect a link-down event. Set this
object to linkUpDown(3) to detect both link up and
link down events."
::= { networkAccessPortEntry 8 }
networkAccessPortLinkDetectionAciton OBJECT-TYPE
SYNTAX INTEGER
{
trap(1),
shutDown(2),
trapAndShutDown(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the action to take when a networkAccessPortLinkDetection
event is triggered. Set this object to trap(1) to send a trap
when a networkAccessPortLinkDetection event is triggered.
Set this object to shutDown(2) to shut down the port when a
networkAccessPortLinkDetection event is triggered. Set this object
to trapAndShutDown(3) to send a trap and shut down the port when a
networkAccessPortLinkDetection event is triggered."
::= { networkAccessPortEntry 9 }
networkAccessPortDynamicQos OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this object to enabled(1) to enable Dynamic QoS.
Set this object to disabled(2) to disable Dynamic QoS."
::= { networkAccessPortEntry 10 }
--
-- networkAccessClearMacAddressMgt
--
networkAccessClearMacAddressMgt OBJECT IDENTIFIER ::= { networkAccessMgt 3 }
networkAccessClearMacAddressAttribute OBJECT-TYPE
SYNTAX INTEGER
{
all (1),
static (2),
dynamic (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Attribute for clearing Mac address. Specifies the certain attribute
in Mac address table. all(1) indicates both reauthorized and learnt
secure MAC address; static(2) indicates reauthorized MAC address;
dynamic(3) indicates learnt secure MAC address."
::= { networkAccessClearMacAddressMgt 1 }
networkAccessClearMacAddressMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies MAC address in the MAC address table for clearing
MAC address. '000000' represents that no MAC address is specified."
::= { networkAccessClearMacAddressMgt 2 }
networkAccessClearMacAddressPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The specifies port in the MAC address table for clearing MAC address.
'0' represents that no port is specified."
::= { networkAccessClearMacAddressMgt 3 }
networkAccessClearMacAddressAction OBJECT-TYPE
SYNTAX INTEGER
{
noclear (1),
clear (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for clearing MAC address . When setting this object to clear(2)
to begin the clearing MAC address operation, a particular MAC address
is cleared from the MAC address table. When the action is finshed whether
or not it is successful or no action is taken, the value of this object
is always noclear(1)."
::= { networkAccessClearMacAddressMgt 4 }
--
-- networkAccessMacAddressTable
--
networkAccessMacAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetworkAccessMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the information of network access MAC addresses."
::= { networkAccessMgt 4}
networkAccessMacAddressEntry OBJECT-TYPE
SYNTAX NetworkAccessMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the networkAccessMacAddress table."
INDEX { networkAccessMacAddressAddress, networkAccessMacAddressPort }
::= { networkAccessMacAddressTable 1 }
NetworkAccessMacAddressEntry ::= SEQUENCE
{
networkAccessMacAddressAddress MacAddress,
networkAccessMacAddressPort INTEGER,
networkAccessMacAddressInetAddressType InetAddressType,
networkAccessMacAddressRadiusServerInetAddress InetAddress,
networkAccessMacAddressTime DisplayString,
networkAccessMacAddressAttribute INTEGER
}
networkAccessMacAddressAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the authenticated MAC address."
::= { networkAccessMacAddressEntry 1 }
networkAccessMacAddressPort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the port of authenticated MAC address."
::= { networkAccessMacAddressEntry 2 }
networkAccessMacAddressInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the type of IP address denoted in
networkAccessMacAddressRadiusServerInetAddress type."
::= { networkAccessMacAddressEntry 3 }
networkAccessMacAddressRadiusServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the IP address of radius server that authenticates
the specified Mac address."
::= { networkAccessMacAddressEntry 4 }
networkAccessMacAddressTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(12))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the authentication time of the authenticated MAC address.
The following form is a text string; 'yyyy MMm DDd HHh MMm SSs'.
'yyyy' is a four-digit year. 'MM' is a month. A single-digit month is
preceded by a zero. 'DD' is the day of a month. A single-digit day
is preceded by the value zero. 'HH', 'MM' and 'SS' are hour,
minute, and second respectively. A single-digit hour, minute,
and second are preceded by a zero value. An example is:
'2001y 01m 01d 00h 04m 43s'."
::= { networkAccessMacAddressEntry 5 }
networkAccessMacAddressAttribute OBJECT-TYPE
SYNTAX INTEGER
{
static (1),
dynamic (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the attribute of an authenticated MAC address.
static(1) indicates resauthorized secure MAC address.
dynamic(2) indicates learnt secure MAC address."
::= { networkAccessMacAddressEntry 6 }
networkAccessAging OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this object to enabled(1) to enable MAC address aging feature.
Set this object to disabled(2) to disable MAC address aging feature."
::= { networkAccessMgt 5 }
--
-- networkAccessMacFilterWithMaskTable
--
networkAccessMacFilterWithMaskTable OBJECT-TYPE
SYNTAX SEQUENCE OF NetworkAccessMacFilterWithMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the settings for MAC filter."
::= { networkAccessMgt 6}
networkAccessMacFilterWithMaskEntry OBJECT-TYPE
SYNTAX NetworkAccessMacFilterWithMaskEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the networkAccessMacFilterWithMaskTable."
INDEX { networkAccessMacFilterWithMaskID,
networkAccessMacFilterWithMaskMacAddress,
networkAccessMacFilterWithMaskMacAddressMask }
::= { networkAccessMacFilterWithMaskTable 1 }
NetworkAccessMacFilterWithMaskEntry ::= SEQUENCE
{
networkAccessMacFilterWithMaskID INTEGER,
networkAccessMacFilterWithMaskMacAddress MacAddress,
networkAccessMacFilterWithMaskMacAddressMask MacAddress,
networkAccessMacFilterWithMaskStatus INTEGER
}
networkAccessMacFilterWithMaskID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the MAC filter ID."
::= { networkAccessMacFilterWithMaskEntry 1 }
networkAccessMacFilterWithMaskMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the MAC address to be filtered."
::= { networkAccessMacFilterWithMaskEntry 2 }
networkAccessMacFilterWithMaskMacAddressMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the MAC mask to be filtered."
::= { networkAccessMacFilterWithMaskEntry 3 }
networkAccessMacFilterWithMaskStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Set this object to valid(1) to create an entry.
Set this object to invalid(2) to destroy an entry."
::= { networkAccessMacFilterWithMaskEntry 4 }
macAuthReauthTime OBJECT-TYPE
SYNTAX Integer32 (120..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the reauthentication time period."
::= { macAuthMgt 1 }
--
-- macAuthPortTable
--
macAuthPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MacAuthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the settings for mac authentication of each port."
::= { macAuthMgt 2 }
macAuthPortEntry OBJECT-TYPE
SYNTAX MacAuthPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the macAuthPort table."
INDEX { macAuthPortIndex }
::= { macAuthPortTable 1 }
MacAuthPortEntry ::= SEQUENCE
{
macAuthPortIndex Integer32,
macAuthPortMaxMacCount INTEGER,
macAuthPortIntrusionAction INTEGER
}
macAuthPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk members) interface of the
port table. The interface identified by a particular value of this
index is the same interface identified by the same value
of ifIndex in the IF-MIB."
::= { macAuthPortEntry 1 }
macAuthPortMaxMacCount OBJECT-TYPE
SYNTAX INTEGER (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the maximum number of authenticated MAC addresses for MAC authentication."
::= { macAuthPortEntry 2 }
macAuthPortIntrusionAction OBJECT-TYPE
SYNTAX INTEGER
{
block-traffic(1),
pass-traffic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Responses to intrusion when the authentication is failed.
block-traffic(1) : denies network access to an unauthorized client;
pass-traffic(2) : allows unauthorized clients to the access network."
::= { macAuthPortEntry 3 }
webAuthSystemAuthControl OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets enabled(1) to enable WebAuth feature and
sets disabled(2) to disable WebAuth feature."
::= { webAuthMgt 1 }
webAuthSessionTimeout OBJECT-TYPE
SYNTAX INTEGER (300..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "For authenticated success users, they can use internet
service during a certain period. Whenever this period expires,
users need to be re-authenticated again. This period is
called session time."
::= { webAuthMgt 5 }
webAuthQuietPeriod OBJECT-TYPE
SYNTAX INTEGER (1..180)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the re-authentication interval when the authentication
fail attempts reach the webAuthLoginAttempts value. Unauthenticated
user won't be authenticated during this period."
::= { webAuthMgt 6 }
webAuthLoginAttempts OBJECT-TYPE
SYNTAX INTEGER (1..3)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the counter that configures the authentication fail times
for a client. If authentication fail times reaches the specified
value, the client are not allowed to login for some period."
::= { webAuthMgt 7 }
--
-- webAuthReauthenticateMgt
--
webAuthReauthenticateMgt OBJECT IDENTIFIER ::= { webAuthMgt 8 }
webAuthReauthenticatePort OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the port to re-authenticate for all of its
authenticated hosts."
::= { webAuthReauthenticateMgt 1 }
webAuthReauthenticateInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies host type to re-authenticate."
::= { webAuthReauthenticateMgt 2 }
webAuthReauthenticateInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specificies host to re-authenticate."
::= { webAuthReauthenticateMgt 3 }
webAuthReauthenticateAction OBJECT-TYPE
SYNTAX INTEGER
{
noReauth (1),
reauth (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for WebAuth re-authenication. When setting this object to
reauth(2) to begin the re-authenticated operation, a particular
user is re-authenticated. When the action is finshed whether it is
successfully, or no action is taken, the value of this
object is always noReauth(1)."
::= { webAuthReauthenticateMgt 4 }
--
-- webAuthPortConfigTable
--
webAuthPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF WebAuthPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the settings for web authentication of each port."
::= { webAuthMgt 9 }
webAuthPortConfigEntry OBJECT-TYPE
SYNTAX WebAuthPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the webAuthPortConfigTable."
INDEX { webAuthPortConfigPortIndex }
::= { webAuthPortConfigTable 1 }
WebAuthPortConfigEntry ::= SEQUENCE
{
webAuthPortConfigPortIndex INTEGER,
webAuthPortConfigStatus INTEGER,
webAuthPortConfigAuthenticatedHostCount INTEGER
}
webAuthPortConfigPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port number of the port that may specify certain entry in the table which contains web authentication information."
::= { webAuthPortConfigEntry 1 }
webAuthPortConfigStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets enabled(1) to enable web authentication feature for each port and
sets disabled(2) to disable web authentication for each port."
::= { webAuthPortConfigEntry 2 }
webAuthPortConfigAuthenticatedHostCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the authenticated host counts for each port"
::= { webAuthPortConfigEntry 3 }
--
-- webAuthPortInfoTable
--
webAuthPortInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF WebAuthPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Contains the information for web authentication of each port."
::= { webAuthMgt 10 }
webAuthPortInfoEntry OBJECT-TYPE
SYNTAX WebAuthPortInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row in the webAuthPortTable."
INDEX { webAuthPortInfoPortIndex, webAuthPortInfoPortAuthSuccessIndex}
::= { webAuthPortInfoTable 1 }
WebAuthPortInfoEntry ::= SEQUENCE
{
webAuthPortInfoPortIndex INTEGER,
webAuthPortInfoPortAuthSuccessIndex INTEGER,
webAuthPortInfoInetAddressType InetAddressType,
webAuthPortInfoInetAddress InetAddress,
webAuthPortInfoRemainingSessiontime INTEGER,
webAuthPortInfoStatus INTEGER
}
webAuthPortInfoPortIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port number for which this entry contains web authentication information."
::= { webAuthPortInfoEntry 1 }
webAuthPortInfoPortAuthSuccessIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The authentication success number of port for which this entry contains web authentication information."
::= { webAuthPortInfoEntry 2 }
webAuthPortInfoInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the type of IP address denoted in webAuthPortInfoIpAddress type."
::= { webAuthPortInfoEntry 3 }
webAuthPortInfoInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The IP address which may specify the entry containing web authentication information."
::= { webAuthPortInfoEntry 4 }
webAuthPortInfoRemainingSessiontime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The remaining session time for authenticated hosts. During this
period, they may use internet resource. When the session time expires, they
will need to re-authenticate again."
::= { webAuthPortInfoEntry 5 }
webAuthPortInfoStatus OBJECT-TYPE
SYNTAX INTEGER
{
authenticated (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Displays the web authentication status for each port.
authenticated (1) means the user is authenticated."
::= { webAuthPortInfoEntry 6 }
--
-- dosMgt
--
system OBJECT IDENTIFIER ::= { dosMgt 1 }
dosEchoChargen OBJECT IDENTIFIER ::= { system 1 }
dosEchoChargenStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The status of Echo/Chargen protection. Set this to
enabled(1) to enable the feature, and set this to
disabled(2) to disable the feature."
::= { dosEchoChargen 1 }
dosEchoChargenRateLimitInKilo OBJECT-TYPE
SYNTAX Integer32 (64..2000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the rate limit for Echo/Chargen packets. The unit
is kilobits per second."
::= { dosEchoChargen 2 }
dosIcmp OBJECT IDENTIFIER ::={ system 10}
dosIcmpFlooding OBJECT IDENTIFIER ::= { dosIcmp 1}
dosIcmpFloodingStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable ICMP flooding protection,
set disabled(2) to disable ICMP flooding protection."
::= { dosIcmpFlooding 1 }
dosIcmpFloodingRateLimitInKilo OBJECT-TYPE
SYNTAX Integer32 (64..2048)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the rate limit for ICMP flooding packets. The
unit is kilobits per second."
::= { dosIcmpFlooding 2 }
dosIcmpNukeStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable ICMP Nuke protection,
set disabled(2) to disable ICMP Nuke protection."
::= { dosIcmp 2 }
dosIcmpPingOfDeathStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable ICMP Ping-of-Death protection,
set disabled(2) to disable ICMP Ping-of-Death protection."
::= { dosIcmp 3 }
dosIcmpSmurfStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable ICMP Smurf protection,
set disabled(2) to disable ICMP Smurf protection."
::= { dosIcmp 4 }
dosIpv4 OBJECT IDENTIFIER ::= { system 11 }
dosIpv4InvalidDestinationIpAddressStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable IPv4 invalid destination IP address
protection, set disabled(2) to disable IPv4 invalid
destination IP address protection."
::= { dosIpv4 1 }
dosIpv4InvalidHeaderLengthStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable IPv4 invalid header length
protection, set disabled(2) to disable IPv4 invalid
header length protection."
::= { dosIpv4 2 }
dosIpv4InvalidIpAddressStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable IPv4 invalid IP address
protection, set disabled(2) to disable IPv4 invalid
IP address protection."
::= { dosIpv4 3 }
dosIpv4InvalidSourceIpAddressStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable IPv4 invalid source IP address
protection, set disabled(2) to disable IPv4 invalid source
IP address protection."
::= { dosIpv4 4 }
dosIpv6 OBJECT IDENTIFIER ::= { system 12 }
dosIpv6InvalidDestinationIpAddressStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable IPv6 invalid destination IP address
protection, set disabled(2) to disable IPv6 invalid
destination IP address protection."
::= { dosIpv6 1 }
dosIpv6InvalidHeaderLengthStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable IPv6 invalid header length
protection, set disabled(2) to disable IPv6 invalid
header length protection."
::= { dosIpv6 2 }
dosIpv6InvalidIpAddressStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable IPv6 invalid IP address
protection, set disabled(2) to disable IPv6 invalid
IP address protection."
::= { dosIpv6 3 }
dosIpv6InvalidSourceIpAddressStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable IPv6 invalid source IP address
protection, set disabled(2) to disable IPv6 invalid source
IP address protection."
::= { dosIpv6 4 }
dosTcp OBJECT IDENTIFIER ::={ system 13 }
dosTcpBlatBlock OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable TCP blat-block protection,
set disabled(2) to disable TCP blat-block protection."
::= { dosTcp 1 }
dosTcpInvalidHeaderLength OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable TCP invalid header length
protection, set disabled(2) to disable TCP invlaid
header length protection."
::= { dosTcp 2 }
dosTcpNullScan OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable TCP Null Scan protection
, set disabled(2) to disable TCP invlaid Null Scan
protection."
::= { dosTcp 3 }
dosTcpSynAckPshBlock OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable TCP SYN-ACK-PSH protection,
set disabled(2) to disable TCP SYN-ACK-PSH protection."
::= { dosTcp 4 }
dosTcpFinScan OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable TCP Fin-Scan protection,
set disabled(2) to disable TCP Fin-Scan protection."
::= { dosTcp 5 }
dosTcpFlooding OBJECT IDENTIFIER ::= { dosTcp 6}
dosTcpFloodingStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable TCP flooding protection,
set disabled(2) to disable TCP flooding protection."
::= { dosTcpFlooding 1 }
dosTcpFloodingRateLimitInKilo OBJECT-TYPE
SYNTAX Integer32 (64..2048)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the rate limit for TCP flooding packets. The
unit is kilobits per second."
::= { dosTcpFlooding 2 }
dosTcpPshBlockStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable TCP Psh-Block protection,
set disabled(2) to disable TCP Psh-Block protection."
::= { dosTcp 7 }
dosTcpRstScanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable TCP Rst-Scan protection,
set disabled(2) to disable TCP Rst-Scan protection."
::= { dosTcp 8 }
dosTcpUrgBlocktatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable TCP Urg-Block protection,
set disabled(2) to disable TCP Urg-Block protection."
::= { dosTcp 9 }
dosTcpXmasScantatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable TCP Xmas-Scan protection,
set disabled(2) to disable TCP Xmas-Scan protection."
::= { dosTcp 10 }
dosUdp OBJECT IDENTIFIER ::={ system 14}
dosUdpBlatBlock OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable UDP blat-block protection,
set disabled(2) to disable UDP blat-block protection."
::= { dosUdp 1 }
dosUdpInvalidHeaderLength OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable UDP invalid header length
protection, set disabled(2) to disable UDP invlaid
header length protection."
::= { dosUdp 2 }
dosUdpFollding OBJECT IDENTIFIER ::= { dosUdp 3 }
dosUdpFloodingStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable UDP flooding protection,
set disabled(2) to disable UDP flooding protection."
::= { dosUdpFollding 1 }
dosUdpFloodingRateLimitInKilo OBJECT-TYPE
SYNTAX Integer32(64..2048)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Value of the rate limit for UDP flooding packets. The
unit is kilobits per second."
::= { dosUdpFollding 2 }
dosStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable enabled(1) to enable DoS Protection, and set
disabled(2) to disable DoS Protection globally."
::={ system 15 }
--
-- portIsolationMgt
--
portIsolationGlobalStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port-Isolation sets enabled(1) to enable status, sets
disabled(2) to disable status."
::= { portIsolationMgt 1 }
portIsolationProfile OBJECT IDENTIFIER ::= { portIsolationMgt 2 }
protIsolationJoinCtl OBJECT IDENTIFIER ::= { portIsolationMgt 3 }
portIsolationProfileId OBJECT-TYPE
SYNTAX Integer32 (1..26)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to assign a Port Isolation profile ID."
::= { portIsolationProfile 1 }
portIsolationProfileBridgeCtl OBJECT IDENTIFIER ::= {portIsolationProfile 2}
--
--portIsolationProfileBridgeCtl
--
portIsolationProfileBridgeCtlType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
ipv4(2),
ipv6(3),
traffic(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to assign a protocol type for Port Isolation
."
::= { portIsolationProfileBridgeCtl 1}
portIsolationProfileBridgeCtlPacketType OBJECT-TYPE
SYNTAX INTEGER
{
arp(1),
dhcp(2),
ndp(3),
broadcast(4),
multicast(5),
unicast(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to assign a packet forwarding type for Port
Isolation. arp(1) and dhcp(2) for IPv4, dhcp(2) and ndp(3) for
IPv6, broadcast(4), multicast(5) and unicast(6) for traffic."
::= { portIsolationProfileBridgeCtl 2}
portIsolationProfileBridgeCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
create(1),
destroy(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set create(1) to create a profile by ID for Port Isolation
protocol type and packet type. Set destroy(2) to destory
a profile by ID for Port-Isolation protocol type and packet
type. If the control action is to destory by profile ID only,
the protocol type must be set as none(0)."
::= {portIsolationProfileBridgeCtl 3}
--
--protIsolationJoinCtl
--
portIsolationJoinCtlId OBJECT-TYPE
SYNTAX Integer32(1..26)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to assign a profile ID to join
Port Isloation."
::= { protIsolationJoinCtl 1 }
portIsolationJoinCtlPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to assign a port ID list to join Port
Isloation."
::= { protIsolationJoinCtl 2 }
portIsolationJoinCtlType OBJECT-TYPE
SYNTAX INTEGER
{
isolated(1),
uplink(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set isolated(1) to join a profile by ID and port number to
isolate received packets. Set uplink(2) to join a profile by
ID and port number to receive packets."
::= { protIsolationJoinCtl 3 }
portIsolationJoinCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
create(1),
destory(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set create(1) to create a action for Port Isolation table. Set
destory(2) to destory a action for Port-Isolation table. Both
of the create or destory a action, joined profile ID, the
interface port number and received packets action type must be
set."
::= { protIsolationJoinCtl 4 }
portIsolationTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortIsolationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A list of Port Isolation status. This table has entries by
existing Port Isolation profile ID."
::= { portIsolationMgt 4 }
portIsolationEntry OBJECT-TYPE
SYNTAX PortIsolationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in the table, containing information about Port
Isolation configuration."
INDEX { portIsolationProfileId }
::= { portIsolationTable 1 }
PortIsolationEntry ::= SEQUENCE
{
portIsolationProfileIndex Integer32,
portIsolationFieldList OCTET STRING,
portIsolationUpLinkPortList PortList,
portIsolationIsolatedPortList PortList,
portIsolationStatus EnabledStatus
}
portIsolationProfileIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A profile ID for Port Isolation."
::= { portIsolationEntry 1 }
portIsolationFieldList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A field list of packets type for Port Isolation."
::= { portIsolationEntry 2 }
portIsolationUpLinkPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A port uplink list for Port Isolation."
::= { portIsolationEntry 3 }
portIsolationIsolatedPortList OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A port isolated list for Port Isolation ."
::= { portIsolationEntry 4 }
portIsolationStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status of joined profile ID for Port Isolation."
::= { portIsolationEntry 5 }
--
-- sysLogMgt
--
-- Management for system log. This configures the logging
-- of events inside the switch.
sysLogStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether the system log is enabled."
::= { sysLogMgt 1 }
sysLogHistoryFlashLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity level for logging to flash."
::= { sysLogMgt 2 }
sysLogHistoryRamLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity level for logging to RAM."
::= { sysLogMgt 3 }
--
--remoteLogMgt
--
remoteLogMgt OBJECT IDENTIFIER ::= { sysLogMgt 6 }
remoteLogStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether the remote log system is enabled."
::= { remoteLogMgt 1 }
remoteLogLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Severity level for remote log."
::= { remoteLogMgt 2 }
remoteLogFacilityType OBJECT-TYPE
SYNTAX INTEGER
{
localUse0(16),
localUse1(17),
localUse2(18),
localUse3(19),
localUse4(20),
localUse5(21),
localUse6(22),
localUse7(23)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION " The facility type for remote log."
::= { remoteLogMgt 3 }
--remoteLogServerInetTable
remoteLogServerInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF RemoteLogServerInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table for storing the remote log server list."
::= { remoteLogMgt 7 }
remoteLogServerInetEntry OBJECT-TYPE
SYNTAX RemoteLogServerInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for remoteLogServerInetTable."
INDEX { remoteLogServerInetAddressType,
remoteLogServerInetAddress,
remoteLogServerUdpPort}
::= { remoteLogServerInetTable 1 }
RemoteLogServerInetEntry ::= SEQUENCE
{
remoteLogServerInetAddressType InetAddressType,
remoteLogServerInetAddress InetAddress,
remoteLogServerUdpPort Integer32,
remoteLogServerStatus ValidStatus
}
remoteLogServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates the type of address
denoted in remoteLogServerInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4)
types are supported."
::= { remoteLogServerInetEntry 1 }
remoteLogServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address of the remote log Server."
::= { remoteLogServerInetEntry 2 }
remoteLogServerUdpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The UDP port number of the remote log Server"
::= { remoteLogServerInetEntry 3 }
remoteLogServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { remoteLogServerInetEntry 4 }
--
--smtpMgt
--
smtpMgt OBJECT IDENTIFIER ::= { sysLogMgt 7 }
smtpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the SMTP, set disabled(2) to disable
the SMTP."
::= { smtpMgt 1 }
smtpSeverityLevel OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specify the SMTP minimum severity level to send the event message."
::= { smtpMgt 2 }
smtpSourceEMail OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..41))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "SMTP source email address,
the sender's mail address that appears
in the 'From' field of the mail."
::= { smtpMgt 3 }
--smtpServerIpTable
smtpServerIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmtpServerIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The SMTP server IP table.
The maximum servers to be added is 3."
::= { smtpMgt 4 }
smtpServerIpEntry OBJECT-TYPE
SYNTAX SmtpServerIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the smtpServerIpTable."
INDEX { smtpServerIp }
::= { smtpServerIpTable 1 }
SmtpServerIpEntry ::= SEQUENCE
{
smtpServerIp IpAddress,
smtpServerIpStatus ValidStatus
}
smtpServerIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "SMTP mail server's IP address."
::= { smtpServerIpEntry 1 }
smtpServerIpStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { smtpServerIpEntry 2 }
--smtpDestEMailTable
smtpDestEMailTable OBJECT-TYPE
SYNTAX SEQUENCE OF SmtpDestEMailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table of the destination e-mail address.
The maximum numbers of destination email address to be added is 5."
::= { smtpMgt 5}
smtpDestEMailEntry OBJECT-TYPE
SYNTAX SmtpDestEMailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row of the smtpDestEMailTable."
INDEX { smtpDestEMail }
::= { smtpDestEMailTable 1 }
SmtpDestEMailEntry ::= SEQUENCE
{
smtpDestEMail DisplayString,
smtpDestEMailStatus ValidStatus
}
smtpDestEMail OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..41))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "SMTP destination e-mail address."
::= { smtpDestEMailEntry 1 }
smtpDestEMailStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { smtpDestEMailEntry 2 }
--
-- lineMgt
--
-- Management for line. This includes management for
-- serial line (RS232 port) and Telnet.
consoleMgt OBJECT IDENTIFIER ::= { lineMgt 1 }
telnetMgt OBJECT IDENTIFIER ::= { lineMgt 2 }
vtyMgt OBJECT IDENTIFIER ::= { lineMgt 3 }
--consoleMgt
consoleDataBits OBJECT-TYPE
SYNTAX INTEGER
{
databits7(1),
databits8(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Number of data bits."
::= { consoleMgt 1 }
consoleParity OBJECT-TYPE
SYNTAX INTEGER
{
partyNone(1),
partyEven(2),
partyOdd(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Defines the generation of a parity bit."
::= { consoleMgt 2 }
consoleBaudRate OBJECT-TYPE
SYNTAX INTEGER
{
baudRate9600(1),
baudRate19200(2),
baudRate38400(3),
baudRate57600(4),
baudRate115200(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Baud rate: Valid values are 115200, 57600, 38400,
19200, and 9600."
::= { consoleMgt 3 }
consoleStopBits OBJECT-TYPE
SYNTAX INTEGER
{
stopbits1(1),
stopbits2(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The console stop bits, valid values are stopbits1(1) or stopbits2(2)"
::= { consoleMgt 4 }
consoleExecTimeout OBJECT-TYPE
SYNTAX Integer32 (0 | 60..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "In a serial console, use the consoleExecTimeout
variable to set the interval that the EXEC command
interpreter waits until user input is detected;
set the value to 0 to disable it."
::= { consoleMgt 5 }
consolePasswordThreshold OBJECT-TYPE
SYNTAX Integer32 (0 | 1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of failed console logon attempts that may be
made before the system will not accept a further attempt
in the time specified by consoleSilentTime. A value of 0
disables the functionality."
::= { consoleMgt 6 }
consoleSilentTime OBJECT-TYPE
SYNTAX Integer32 (0 | 1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The length of time that the management console is
inaccessible after the number of failed logon
attempts has reached consolePasswordThreshold. A value
of 0 disables the functionality."
::= { consoleMgt 7 }
--to set login timeout seconds
consoleLoginResponseTimeout OBJECT-TYPE
SYNTAX Integer32(10..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Console login response timeout setting."
::= { consoleMgt 10 }
-- telnetMgt
telnetStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable or disable the telnet function. Any new telnet
request will be rejected and all current telnet sessions
will be terminated if this status is set to disabled(2)."
DEFVAL { enabled }
::= { telnetMgt 4 }
telnetPortNumber OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The telnet session port number."
DEFVAL { 23 }
::= { telnetMgt 5 }
-- vtyMgt
vtyExecTimeout OBJECT-TYPE
SYNTAX Integer32 (60..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the interval that the system waits for user input
before terminating the current session."
::= { vtyMgt 1 }
vtyPasswordThreshold OBJECT-TYPE
SYNTAX Integer32 (0 | 1..120)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of failed logon attempts that may be made before the
system will not accept a further attempt to log on.
Setting to 0 means disabled."
::= { vtyMgt 2 }
vtyLoginResponseTimeout OBJECT-TYPE
SYNTAX Integer32(10..300)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Login response timeout setting."
::= { vtyMgt 3 }
vtyMaxSession OBJECT-TYPE
SYNTAX Integer32 (0..8)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of allowed sessions."
DEFVAL { 8 }
::= { vtyMgt 4 }
vtySilentTime OBJECT-TYPE
SYNTAX Integer32 (0 | 1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time the system waits before etablishing a new session
after the number of failed logins reaches the specified limit.
Setting to 0 means disabled."
::= { vtyMgt 5 }
--
-- sysTimeMgt
--
sntpMgt OBJECT IDENTIFIER ::= { sysTimeMgt 1 }
ntpMgt OBJECT IDENTIFIER ::= { sysTimeMgt 5 }
sntpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the SNTP, set disabled(2) to disable
the SNTP."
::= { sntpMgt 1 }
sntpServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
unicast(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service mode."
::= { sntpMgt 2 }
sntpPollInterval OBJECT-TYPE
SYNTAX Integer32(16..16384)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Polling interval."
::= { sntpMgt 3 }
sntpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for SNTP servers. IP addresses
must occupy contiguous indexes, starting from 1.
If a removed entry is not the last entry, the table
will be shifted to contiguous indexes automatically."
::= { sntpMgt 4 }
sntpServerEntry OBJECT-TYPE
SYNTAX SntpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for SNTP servers."
INDEX { sntpServerIndex }
::= { sntpServerTable 1 }
SntpServerEntry ::= SEQUENCE
{
sntpServerIndex Integer32,
sntpServerInetAddressType InetAddressType,
sntpServerInetAddress InetAddress,
sntpServerStatus ValidStatus
}
sntpServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..3)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a server."
::= { sntpServerEntry 1 }
sntpServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Indicates the type of address
denoted in sntpServerInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4)
types are supported."
::= { sntpServerEntry 4 }
sntpServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The IP address of a time server."
::= { sntpServerEntry 5 }
sntpServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { sntpServerEntry 6 }
sysCurrentTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(20))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is a text string in the following form, based on Unix:
'Mmm _d hh:mm:ss yyyy'. 'Mmm' are the first three letters
of the English name of the month. '_d' is the day of month.
A single-digit day is preceded by a space. 'hh:mm:ss' is
a 24-hour representations of hours, minutes, and seconds.
A single-digit hour is preceded by a zero. 'yyyy' is a
four-digit year. An example is: 'Jan 1 02:03:04 2002'."
::= { sysTimeMgt 2 }
sysTimeZone OBJECT-TYPE
SYNTAX DisplayString(SIZE(6))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This is a text string in the following form: '[s]hh:mm'.
'[s]' is a plus-or-minus sign. For UTC, this is omitted.
For a positive offset, this is '+'. For a negative offset,
this is '-'. 'hh:mm' in the hour and minute offset from UTC.
A single-digit hour is preceded by a zero. When
sysTimeZonePredefined object is set to any value other than
none(1), this object will be empty string."
::= { sysTimeMgt 3 }
sysTimeZoneName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..30))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the time zone. When sysTimeZonePredefined object
is set to any value other than none(1), this object will be
empty string."
::= { sysTimeMgt 4 }
ntpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the NTP, set disabled(2) to disable
the NTP."
::= { ntpMgt 1 }
ntpServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
unicast(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Service mode."
::= { ntpMgt 2 }
ntpPollInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Polling interval in seconds."
::= { ntpMgt 3 }
ntpAuthenticateStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable the NTP Authenticate, set disabled(2) to
disable the NTP."
::= { ntpMgt 4 }
ntpServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for NTP servers"
::= { ntpMgt 5 }
ntpServerEntry OBJECT-TYPE
SYNTAX NtpServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for NTP servers."
INDEX { ntpServerIpAddress }
::= { ntpServerTable 1 }
NtpServerEntry ::= SEQUENCE
{
ntpServerIpAddress IpAddress,
ntpServerVersion Integer32,
ntpServerKeyId Integer32,
ntpServerStatus INTEGER
}
ntpServerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index is 0."
::= { ntpServerEntry 1 }
ntpServerVersion OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NTP version."
::= { ntpServerEntry 2 }
ntpServerKeyId OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Key for a NTP server. This variable can only be written."
::= { ntpServerEntry 3 }
ntpServerStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ntpServerEntry 4 }
ntpAuthKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtpAuthKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for NTP Authentication keys"
::= { ntpMgt 6 }
ntpAuthKeyEntry OBJECT-TYPE
SYNTAX NtpAuthKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for NTP Authentication keys."
INDEX { ntpAuthKeyId }
::= { ntpAuthKeyTable 1 }
NtpAuthKeyEntry::= SEQUENCE
{
ntpAuthKeyId Integer32,
ntpAuthKeyWord OCTET STRING,
ntpAuthKeyStatus INTEGER
}
ntpAuthKeyId OBJECT-TYPE
SYNTAX Integer32 (1..65536)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The index of a Authentication key. This table has fixed size."
::= { ntpAuthKeyEntry 1 }
ntpAuthKeyWord OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The Authentication key word is used to created a key by the MD5
And the max length is 32."
::= { ntpAuthKeyEntry 2 }
ntpAuthKeyStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { ntpAuthKeyEntry 3 }
--
-- fileMgt
--
-- Management for File System Manipulate, including files copy, display and delete.
fileCopyMgt OBJECT IDENTIFIER ::= { fileMgt 1 }
fileInfoMgt OBJECT IDENTIFIER ::= { fileMgt 2 }
fileAutoUpgradeMgt OBJECT IDENTIFIER ::= { fileMgt 4 }
--
-- This performs the copy operation.
--
fileCopySrcOperType OBJECT-TYPE
SYNTAX INTEGER
{
file(1),
runningCfg(2),
startUpCfg(3),
tftp(4),
unit(5),
http(6),
ftp(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "fileCopySrcOperType specifies where to copy from,
and fileCopyDestOperType specifies where to copy to.
Possible combinations of 'fileCopySrcOperType to
fileCopyDestOperType' and required parameters are listed in
the following table.
--------------+------------------+---------------------------------
Source | Destination | Required parameters
--------------+------------------+---------------------------------
file(1) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
+------------------+---------------------------------
| runningCfg(2) | fileCopySrcFileName
+------------------+---------------------------------
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
+------------------+---------------------------------
| tftp(4) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| unit(5) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyUnitId
+------------------+---------------------------------
| ftp(7) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------
runningCfg(2) | file(1) | fileCopyDestFileName
+------------------+---------------------------------
| startUpCfg(3) | fileCopyDestFileName
+------------------+---------------------------------
| tftp(4) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| ftp(7) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------
startUpCfg(3) | file(1) | fileCopyDestFileName
+------------------+---------------------------------
| runningCfg(2) | None.
+------------------+---------------------------------
| tftp(4) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| ftp(7) | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------
tftp(4) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| runningCfg(2) | fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
+------------------+---------------------------------
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
--------------+------------------+---------------------------------
unit(5) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyUnitId
--------------+------------------+---------------------------------
ftp(7) | file(1) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyFileType
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| runningCfg(2) | fileCopySrcFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
+------------------+---------------------------------
| startUpCfg(3) | fileCopySrcFileName
| | fileCopyDestFileName
| | fileCopyServerInetAddressType
| | fileCopyServerInetAddress
| | fileCopyServerUserName
| | fileCopyServerPassword
--------------+------------------+---------------------------------"
::= { fileCopyMgt 1}
fileCopySrcFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The source file name for fileCopyMgt when a copy
operation is next requested via this MIB. This value is set to
a zero length string when no file name has been specified.
Note: If the fileCopySrcOperType is runningCfg(2) or startUpCfg(3),
this variable can be ignored."
::= { fileCopyMgt 2 }
fileCopyDestOperType OBJECT-TYPE
SYNTAX INTEGER
{
file(1),
runningCfg(2),
startUpCfg(3),
tftp(4),
unit(5),
http(6),
ftp(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "See the description for fileCopySrcOperType."
::= { fileCopyMgt 3 }
fileCopyDestFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The destination file name for fileCopyMgt when a
copy operation is next requested via this MIB. This value is set to
a zero length string when no file name has been specified.
Note: If the fileCopyDestOperType is runningCfg(2) or startupCfg(3),
this variable can be ignored."
::= { fileCopyMgt 4 }
fileCopyFileType OBJECT-TYPE
SYNTAX INTEGER {
opcode(1),
config(2),
bootRom(3),
loader(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of file to copy in fileCopyMgt. opcode(1) indicates operation
code, config(2) indicates configuration file, bootRom(3) indicates
diagnostic image file and loader(5) indicates loader image file. If
the fileCopySrcOperType or fileCopyDestOperType is either runningCfg(2)
or startupCfg(3), this variable can be ignored. bootRom(3) and
loader(5) can be set only when the fileCopySrcOperType is tftp(4) and
fileCopyDestOperType is file(1)."
::= { fileCopyMgt 5 }
fileCopyUnitId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the switch unit for stackable devices.
When performing the 'copy unit file' or 'copy file unit' action,
if neither fileCopySrcOperType nor fileCopyDestOperType
is unit(5), this variable can be ignored."
::= { fileCopyMgt 7 }
fileCopyAction OBJECT-TYPE
SYNTAX INTEGER
{
notCopying(1),
copy(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Setting this object to copy(2) to begin the copy operation. When
the device is not copying, this object will have a value of
notCopying(1)."
::= { fileCopyMgt 8 }
fileCopyStatus OBJECT-TYPE
SYNTAX INTEGER {
fileCopyTftpUndefError(1),
fileCopyTftpFileNotFound(2),
fileCopyTftpAccessViolation(3),
fileCopyTftpDiskFull(4),
fileCopyTftpIllegalOperation(5),
fileCopyTftpUnkownTransferId(6),
fileCopyTftpFileExisted(7),
fileCopyTftpNoSuchUser(8),
fileCopyTftpTimeout(9),
fileCopyTftpSendError(10),
fileCopyTftpReceiverError(11),
fileCopyTftpSocketOpenError(12),
fileCopyTftpSocketBindError(13),
fileCopyTftpUserCancel(14),
fileCopyTftpCompleted(15),
fileCopyParaError(16),
fileCopyBusy(17),
fileCopyUnknown(18),
fileCopyReadFileError(19),
fileCopySetStartupError(20),
fileCopyFileSizeExceed(21),
fileCopyMagicWordError(22),
fileCopyImageTypeError(23),
fileCopyHeaderChecksumError(24),
fileCopyImageChecksumError(25),
fileCopyWriteFlashFinish(26),
fileCopyWriteFlashError(27),
fileCopyWriteFlashProgramming(28),
fileCopyError(29),
fileCopySuccess(30),
fileCopyCompleted(31),
--
-- ES4612-20-00499, 2008-12-09, support FTPS
--
fileCopyFileNotFound(41),
fileCopyServerPermissionDenied(42),
fileCopyStorageFull(43),
fileCopyConnectError(44),
fileCopyServerNotInService(45),
fileCopyDataConnectionOpenError(46),
fileCopyLogInError(47),
fileCopyInvalidFileName(48),
fileCopyServerNotAcceptProvidedCiphers(49),
fileCopyServerNotSupportFtps(50),
fileCopyFileUnavailable(51),
fileCopyUnclassifiedError(52),
fileCopyTimeout(53),
fileCopyProjectIdError(54),
fileCopyFileNumExceed(55),
fileCopySameVersion(56)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the last copy procedure, if any. This
object will have a value of fileCopyUnknown(18) if no
copy operation has been performed. The listed values are
identical to fileAutoDownloadResultStatus."
::= { fileCopyMgt 9 }
fileCopyServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Internet address type of the remote server. Only ipv4(1)
type is supported."
::= { fileCopyMgt 20 }
fileCopyServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Internet address of the remote server."
::= { fileCopyMgt 21 }
fileCopyServerUserName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Login user name for the remote server. When this variable is
empty, the system will use 'anonymous' as user name to log in
to the remote server."
::= { fileCopyMgt 22 }
fileCopyServerPassword OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Login password for the remote server. This variable can only
be written. When this variable is read, it always returns a
zero-length string."
::= { fileCopyMgt 23 }
--
-- This mangement performs the display and delete operation.
--
fileInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contain the information of the file system;
we can also perform the delete, set startup file operation."
::= { fileInfoMgt 1 }
fileInfoEntry OBJECT-TYPE
SYNTAX FileInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptually row for fileInfoTable."
INDEX { fileInfoUnitID, IMPLIED fileInfoFileName}
::= { fileInfoTable 1 }
FileInfoEntry ::= SEQUENCE
{
fileInfoUnitID Integer32,
fileInfoFileName DisplayString,
fileInfoFileType INTEGER,
fileInfoIsStartUp TruthValue,
fileInfoFileSize Integer32,
fileInfoCreationTime DisplayString,
fileInfoDelete INTEGER
}
fileInfoUnitID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The switch unit in a stacking system, in a
non-stacking system, this value is always 1."
::= { fileInfoEntry 1 }
fileInfoFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The file Name of the file System in the device."
::= { fileInfoEntry 2 }
fileInfoFileType OBJECT-TYPE
SYNTAX INTEGER
{
diag(1),
runtime(2),
syslog(3),
cmdlog(4),
config(5),
postlog(6),
private(7),
certificate(8),
webarchive(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The file type of the file System in the device."
::= { fileInfoEntry 3 }
fileInfoIsStartUp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This flag indicate whether this file is a startup file. Set this
object to true(1) to indicate that this is a startup file. Setting this
object to false(2) is a invalid operation."
::= { fileInfoEntry 4 }
fileInfoFileSize OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The sizes( in bytes) of the file."
::= { fileInfoEntry 5 }
fileInfoCreationTime OBJECT-TYPE
SYNTAX DisplayString(SIZE(20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The creation time of the file, This is a text string in the
following form, based on Unix: 'Mmm _d hh:mm:ss yyyy'. 'Mmm'
are the first three letters of the English name of the month.
'_d' is the day of month. A single-digit day is preceded by
a space. 'hh:mm:ss' is a 24-hour representations of hours,
minutes, and seconds. A single-digit hour is preceded by a
zero. 'yyyy' is the four-digit year. An example is:
'Jan 1 02:03:04 2002'."
::= { fileInfoEntry 6 }
fileInfoDelete OBJECT-TYPE
SYNTAX INTEGER
{
noDelete(1),
delete(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Write this object to delete(2) to delete a file, when
read, this always return noDelete(1)."
::= { fileInfoEntry 7 }
--fileAutoDownloadResultTable
fileAutoDownloadResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF FileAutoDownloadResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table contains file auto download result information."
::= { fileMgt 3 }
fileAutoDownloadResultEntry OBJECT-TYPE
SYNTAX FileAutoDownloadResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for fileAutoDownloadResultTable."
INDEX {fileAutoDownloadResultUnitID}
::= { fileAutoDownloadResultTable 1 }
FileAutoDownloadResultEntry ::= SEQUENCE
{
fileAutoDownloadResultUnitID Integer32,
fileAutoDownloadResultAction INTEGER,
fileAutoDownloadResultStatus INTEGER
}
fileAutoDownloadResultUnitID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The switch unit in a stacking system, in a
non-stacking system, this value is always 1."
::= { fileAutoDownloadResultEntry 1 }
fileAutoDownloadResultAction OBJECT-TYPE
SYNTAX INTEGER
{
notCopying(1),
copying(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of the auto download action.
value copying(2) will be obtained if the auto download action is currently processing,
or value notCopying(1) will be obtained if no auto download action is currently processing.
You can check the download result through the fileAutoDownloadResultStatus object
after the download action has finished.
Please note that this object is read-only, since the auto download action is triggered
automatically by the system when an image file or a config file is set as startup setting
through the fileInfoIsStartUp, restartOpCodeFile or restartConfigFile objects,
but not set by the user manually through this fileAutoDownloadResultAction object."
::= { fileAutoDownloadResultEntry 2 }
fileAutoDownloadResultStatus OBJECT-TYPE
SYNTAX INTEGER {
fileCopyTftpUndefError(1),
fileCopyTftpFileNotFound(2),
fileCopyTftpAccessViolation(3),
fileCopyTftpDiskFull(4),
fileCopyTftpIllegalOperation(5),
fileCopyTftpUnkownTransferId(6),
fileCopyTftpFileExisted(7),
fileCopyTftpNoSuchUser(8),
fileCopyTftpTimeout(9),
fileCopyTftpSendError(10),
fileCopyTftpReceiverError(11),
fileCopyTftpSocketOpenError(12),
fileCopyTftpSocketBindError(13),
fileCopyTftpUserCancel(14),
fileCopyTftpCompleted(15),
fileCopyParaError(16),
fileCopyBusy(17),
fileCopyUnknown(18),
fileCopyReadFileError(19),
fileCopySetStartupError(20),
fileCopyFileSizeExceed(21),
fileCopyMagicWordError(22),
fileCopyImageTypeError(23),
fileCopyHeaderChecksumError(24),
fileCopyImageChecksumError(25),
fileCopyWriteFlashFinish(26),
fileCopyWriteFlashError(27),
fileCopyWriteFlashProgramming(28),
fileCopyError(29),
fileCopySuccess(30),
fileCopyCompleted(31),
--
-- ES4612-20-00499, 2008-12-09, support FTPS
--
fileCopyFileNotFound(41),
fileCopyServerPermissionDenied(42),
fileCopyStorageFull(43),
fileCopyConnectError(44),
fileCopyServerNotInService(45),
fileCopyDataConnectionOpenError(46),
fileCopyLogInError(47),
fileCopyInvalidFileName(48),
fileCopyServerNotAcceptProvidedCiphers(49),
fileCopyServerNotSupportFtps(50),
fileCopyFileUnavailable(51),
fileCopyUnclassifiedError(52),
fileCopyTimeout(53),
fileCopyProjectIdError(54),
fileCopyFileNumExceed(55),
fileCopySameVersion(56)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The last auto download result status.
value fileCopyUnknown(18) will be obtained
if no download action has been performed before.
The listed values are identical to fileCopyStatus."
::= { fileAutoDownloadResultEntry 3 }
--
--dnsMgt
--
--dnsHostTable
dnsDomainLookup OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable the IP Domain Naming System (DNS)-based host name-to-address translation."
::= { dnsMgt 1 }
dnsDomainName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To define a default domain name to complete
unqualified host names (names without a dotted-decimal domain name)."
::= { dnsMgt 2 }
--dnsCacheTable
dnsCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "To display the RRs in DNS cache."
::= { dnsMgt 7 }
dnsCacheEntry OBJECT-TYPE
SYNTAX DnsCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for the dnsCacheTable."
INDEX { dnsCacheIndex }
::= { dnsCacheTable 1 }
DnsCacheEntry ::= SEQUENCE
{
dnsCacheIndex Integer32,
dnsCacheFlag Integer32,
dnsCacheType INTEGER,
dnsCacheTtl Integer32,
dnsCacheDomain DisplayString,
dnsCacheInetAddressType InetAddressType,
dnsCacheInetAddress InetAddress
}
dnsCacheIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry sequence number."
::= { dnsCacheEntry 1 }
dnsCacheFlag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Always get 4, means this record is unreliable."
::= { dnsCacheEntry 2 }
dnsCacheType OBJECT-TYPE
SYNTAX INTEGER
{
address(1),
cname(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Cache Type: address(1); cname(2)."
::= { dnsCacheEntry 3 }
dnsCacheTtl OBJECT-TYPE
SYNTAX Integer32(0..876000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DNS cache TTL."
::= { dnsCacheEntry 5 }
dnsCacheDomain OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The DNS cache domain."
::= { dnsCacheEntry 6 }
dnsCacheInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the type of address
denoted in dnsHostAddrInetAddress type.
Only ipv4(1) and ipv6(2) types are supported."
::= { dnsCacheEntry 7 }
dnsCacheInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP address of DNS cache item."
::= { dnsCacheEntry 8 }
dnsHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of dnsHostEntry.
The dnsHostTable and dnsHostAddrTable are used to define
static host name-to-address mapping."
::= { dnsMgt 8 }
dnsHostEntry OBJECT-TYPE
SYNTAX DnsHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for the dnsHostTable."
INDEX { dnsHostIndex }
::= { dnsHostTable 1 }
DnsHostEntry ::= SEQUENCE
{
dnsHostIndex Integer32,
dnsHostName DisplayString,
dnsHostStatus ValidStatus
}
dnsHostIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry sequence number."
::= { dnsHostEntry 1 }
dnsHostName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Host name."
::= { dnsHostEntry 2 }
dnsHostStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { dnsHostEntry 3 }
--dnsHostAddrTable
dnsHostAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsHostAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual table of dnsHostAddrEntry.
The dnsHostTable and dnsHostAddrTable are used to define
static host name-to-address mapping."
::= { dnsMgt 9 }
dnsHostAddrEntry OBJECT-TYPE
SYNTAX DnsHostAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for the dnsHostAddrTable."
INDEX { dnsHostIndex, dnsHostAddrInetAddressType,
IMPLIED dnsHostAddrInetAddress}
::= { dnsHostAddrTable 1 }
DnsHostAddrEntry ::= SEQUENCE
{
dnsHostAddrInetAddressType InetAddressType,
dnsHostAddrInetAddress InetAddress,
dnsHostAddrStatus ValidStatus
}
dnsHostAddrInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Indicates the type of address
denoted in dnsHostAddrInetAddress type.
Only ipv4(1), ipv6(2) and ipv6z(4) type are supported."
::= { dnsHostAddrEntry 1 }
dnsHostAddrInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the address of the host.
Adding one address to two different hosts is not allowed."
::= { dnsHostAddrEntry 2 }
dnsHostAddrStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { dnsHostAddrEntry 3 }
--dnsDomainListTable
dnsDomainListTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsDomainListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table defines a list of default domain names to complete unqualified host names."
::= { dnsMgt 10 }
dnsDomainListEntry OBJECT-TYPE
SYNTAX DnsDomainListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for the dnsDomainListTable."
INDEX { dnsDomainListIndex }
::= { dnsDomainListTable 1 }
DnsDomainListEntry ::= SEQUENCE
{
dnsDomainListIndex Integer32,
dnsDomainListName DisplayString,
dnsDomainListStatus ValidStatus
}
dnsDomainListIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry sequence number."
::= { dnsDomainListEntry 1 }
dnsDomainListName OBJECT-TYPE
SYNTAX DisplayString(SIZE(1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Domain name."
::= { dnsDomainListEntry 2 }
dnsDomainListStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { dnsDomainListEntry 3 }
dnsNameServerInetTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsNameServerInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Specifies the address of one or more name servers to use for
name and address resolution."
::= { dnsMgt 11 }
dnsNameServerInetEntry OBJECT-TYPE
SYNTAX DnsNameServerInetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row for dnsNameServerInetTable."
INDEX { dnsNameServerInetAddressType, IMPLIED dnsNameServerInetAddress }
::= { dnsNameServerInetTable 1 }
DnsNameServerInetEntry ::= SEQUENCE
{
dnsNameServerInetAddressType InetAddressType,
dnsNameServerInetAddress InetAddress,
dnsNameServerInetStatus ValidStatus
}
dnsNameServerInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Type of address. Only ipv4(1), ipv6(2) and ipv6z(4) types are
supported."
::= { dnsNameServerInetEntry 1 }
dnsNameServerInetAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP address of name server."
::= { dnsNameServerInetEntry 2 }
dnsNameServerInetStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { dnsNameServerInetEntry 3 }
--
-- This mangement automatically upgrades image.
--
fileAutoUpgradeOpCodeStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this variable to enabled(1) to enable the device to
automatically upgrade the current software image when a new
version is detected. Set this variable to disabled(2) to
disable this feature."
::= { fileAutoUpgradeMgt 1 }
fileAutoUpgradeOpCodePath OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The URL (Universal Resource Location) of the image file
location for automatic upgrades. The URL schema can be set to
TFTP. The Hostname is the IP address of the server. The
last character of the URL is always a '/' and the filename must
not be included in the URL."
::= { fileAutoUpgradeMgt 2 }
fileAutoUpgradeOpCodeFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The file name of the image file."
::= { fileAutoUpgradeMgt 3 }
--
-- poeMgt
--
--
-- PSE/PD for IEEE draft 802.3at v3.2, Feb. 2009
--
-- PSE global objects
pethPseMainExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF PethPseMainExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that display and control attributes of the main
power source in a PSE device. Ethernet switches are one example of
boxes that would support these objects. Values of all read-write
objects in this table are persistent at restart/reboot."
REFERENCE "IEEE 802.3af, POWER-ETHERNET-MIB.pethMainPseTable"
::= { poeMgt 5 }
pethPseMainExtEntry OBJECT-TYPE
SYNTAX PethPseMainExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display and control the Main power of a PSE."
AUGMENTS { pethMainPseEntry }
::= { pethPseMainExtTable 1 }
PethPseMainExtEntry ::= SEQUENCE
{
pethPseMainExtDllPowerType INTEGER,
pethPseMainExtDllPowerSource INTEGER
}
pethPseMainExtDllPowerType OBJECT-TYPE
SYNTAX INTEGER
{
type2Pse(0),
type1Pse(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the local system is a PSE or a PD
and whether it is Type 1 or Type 2."
REFERENCE
"IEEE Std 802.3at Section 30.9.1.1.12
aDLLPowerType"
::= { pethPseMainExtEntry 1 }
pethPseMainExtDllPowerSource OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
primary(1),
backup(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power sources of the local system."
REFERENCE
"IEEE Std 802.3at Section 30.9.1.1.14
aDLLPowerSource"
::= { pethPseMainExtEntry 2 }
--
-- PSE Port Table
--
pethPsePortExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF PethPsePortExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that display and control the power characteristics
of power Ethernet ports on a Power Source Entity (PSE) device.
This group will be implemented in managed power Ethernet switches and
mid-span devices. Values of all read-write objects in this table are
persistent at restart/reboot."
REFERENCE "IEEE 802.3af, POWER-ETHERNET-MIB.pethPsePortTable"
::= { poeMgt 6 }
pethPsePortExtEntry OBJECT-TYPE
SYNTAX PethPsePortExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of objects that display and control the power characteristics of
a power Ethernet PSE port."
AUGMENTS { pethPsePortEntry }
::= { pethPsePortExtTable 1 }
PethPsePortExtEntry ::= SEQUENCE
{
pethPsePortExtMirroredDllPdRequestedPowerValue INTEGER,
pethPsePortExtDllPseAllocatedPowerValue INTEGER,
pethPsePortTimeRange DisplayString,
pethPsePortTimeRangeStatus INTEGER,
pethPsePortExtMaximumPowerValue INTEGER,
pethPsePortExtUsedPowerValue INTEGER
}
pethPsePortExtMirroredDllPdRequestedPowerValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the PD requested power value received from the remote system.
The definition and encoding of PD requested power value is the same as
described in pethPdPortDllPdRequestedPowerValue."
REFERENCE
"IEEE Std 802.3at Section 30.9.1.1.18
aMirroredDLLPDRequestedPowerValue"
::= { pethPsePortExtEntry 4 }
pethPsePortExtDllPseAllocatedPowerValue OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the PSE allocated power value that the local system has
currently allocated to the remote system. The PSE allocated power value
is the maximum input average power that the PSE wants the PD to ever
draw under this allocation if it is accepted. The PSE allocated power
value is encoded according to Equation (33-20), where X is the decimal
value of pethPsePortExtDllPseAllocatedPowerValue."
REFERENCE
"IEEE Std 802.3at Section 30.9.1.1.20
aDLLPSEAllocatedPowerValue"
::= { pethPsePortExtEntry 6 }
pethPsePortTimeRange OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The name of the time range entry bound to the port.
This object should be equal to one of the timeRangeName
objects in timeRangeTable. The object works when
pethPsePortAdminEnable is enabled(1)."
::= { pethPsePortExtEntry 11 }
pethPsePortTimeRangeStatus OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "If no time range entry is bound to the port, value of this
object is none(0). If PoE time range of the port is active,
value of this object is active(1). If PoE time range of
the port is inactive, value of this object is inactive(2)."
::= { pethPsePortExtEntry 12 }
pethPsePortExtMaximumPowerValue OBJECT-TYPE
SYNTAX INTEGER (3000..34200)
UNITS "milliwatts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Returns the user-configurable maximum power value that
the local system has currently allocated to the remote system.
The units of this variable is milliwatts."
::= { pethPsePortExtEntry 13 }
pethPsePortExtUsedPowerValue OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliwatts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Returns the currently used power value that
the local system is delivering to the remote system.
The units of this variable is milliwatts."
::= { pethPsePortExtEntry 14 }
--
-- mcastStormMgt
--
mcastStormMgt OBJECT IDENTIFIER ::= { stormMgt 1 }
mcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF McastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to manage the control of multicast storms for ports."
::= { mcastStormMgt 1 }
mcastStormEntry OBJECT-TYPE
SYNTAX McastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of multiStormTable."
INDEX { mcastStormIfIndex }
::= { mcastStormTable 1 }
McastStormEntry ::= SEQUENCE
{
mcastStormIfIndex Integer32,
mcastStormStatus EnabledStatus,
mcastStormOctetRate Integer32
}
mcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { mcastStormEntry 1 }
mcastStormStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether multicast storm protection is enabled."
::= { mcastStormEntry 2 }
mcastStormOctetRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Multicast storm threshold as kilobit per second.
If this entry is for a trunk, this is the value
for each member port. The range is 64 to 1000000."
::= { mcastStormEntry 5 }
--
-- bcastStormMgt
--
-- Management for broadcast storm control for ports.
bcastStormMgt OBJECT IDENTIFIER ::= { stormMgt 3 }
bcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF BcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to manage the control of broadcast storms for ports."
::= { bcastStormMgt 1 }
bcastStormEntry OBJECT-TYPE
SYNTAX BcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of bcastStormTable."
INDEX { bcastStormIfIndex }
::= { bcastStormTable 1 }
BcastStormEntry ::= SEQUENCE
{
bcastStormIfIndex Integer32,
bcastStormStatus EnabledStatus,
bcastStormOctetRate Integer32
}
bcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (including trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { bcastStormEntry 1 }
bcastStormStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether broadcast storm protection is enabled."
::= { bcastStormEntry 2 }
bcastStormOctetRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Broadcast storm threshold as kilobit per second.
If this entry is for a trunk, this is the value
for each member port. The range is 64 to 1000000."
::= { bcastStormEntry 5 }
--
-- unknownUcastStormMgt
--
unknownUcastStormMgt OBJECT IDENTIFIER ::= {stormMgt 4 }
unknownUcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF UnknownUcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table to manage the unknown unicast storm control."
::= { unknownUcastStormMgt 1 }
unknownUcastStormEntry OBJECT-TYPE
SYNTAX UnknownUcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of unknownUcastStormTable."
INDEX { unknownUcastStormIfIndex }
::= { unknownUcastStormTable 1 }
UnknownUcastStormEntry ::= SEQUENCE
{
unknownUcastStormIfIndex Integer32,
unknownUcastStormStatus EnabledStatus,
unknownUcastStormOctetRate Integer32
}
unknownUcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port or trunk interface of the portTable. The interface
identified by a particular value of this index is the same
interface as identified by the same value of ifIndex in the
IF-MIB."
::= { unknownUcastStormEntry 1 }
unknownUcastStormStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that the unknown unicast
storm protection is enabled/disabled."
::= { unknownUcastStormEntry 2 }
unknownUcastStormOctetRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the packet rate(kilobit per second) of the storm protection.
The range is 64 to 1000000."
::= { unknownUcastStormEntry 5 }
--
-- Auto Traffic Control
--
atcMgt OBJECT IDENTIFIER ::= { stormMgt 5 }
atcBcastStormTcApplyTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the timing when the ATC (Auto
Traffic Control) is activated after the broadcast traffic
being detected as the storm."
::= { atcMgt 1 }
atcBcastStormTcReleaseTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the timing when the ATC is released
after the broadcast traffic being detected as no storm."
::= { atcMgt 2 }
atcBcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtcBcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table contains the Auto Traffic Control configuration
and the status for broadcast traffic."
::= { atcMgt 3 }
atcBcastStormEntry OBJECT-TYPE
SYNTAX AtcBcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of the table."
INDEX { atcBcastStormIfIndex }
::= { atcBcastStormTable 1 }
AtcBcastStormEntry ::= SEQUENCE
{
atcBcastStormIfIndex Integer32,
atcBcastStormEnable EnabledStatus,
atcBcastStormAutoRelease EnabledStatus,
atcBcastStormSampleType INTEGER,
atcBcastStormCurrentTrafficRate Integer32,
atcBcastStormAlarmFireThreshold Integer32,
atcBcastStormAlarmClearThreshold Integer32,
atcBcastStormTcAction INTEGER,
atcBcastStormAlarmFireTrapStatus EnabledStatus,
atcBcastStormAlarmClearTrapStatus EnabledStatus,
atcBcastStormTcApplyTrapStatus EnabledStatus,
atcBcastStormTcReleaseTrapStatus EnabledStatus
}
atcBcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The specified port on which the ATC is applied."
::= { atcBcastStormEntry 1 }
atcBcastStormEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the ATC of the broadcast
traffic is applied."
::= { atcBcastStormEntry 2 }
atcBcastStormAutoRelease OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the Auto-Release feature
of ATC is applied."
::= { atcBcastStormEntry 3 }
atcBcastStormSampleType OBJECT-TYPE
SYNTAX INTEGER
{
packet-rate(1),
octet-rate(2),
percent(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the unit of traffic rate and threshold."
::= { atcBcastStormEntry 4 }
atcBcastStormCurrentTrafficRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The parameter indicates the current broadcast traffic rate."
::= { atcBcastStormEntry 5 }
atcBcastStormAlarmFireThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that if the current broadcast traffic rate
exceeds the specified threshold, it will be treated as the storm."
::= { atcBcastStormEntry 6 }
atcBcastStormAlarmClearThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that if the current broadcast traffic
falls below the specified threshold it will be treated as the
normal traffic."
::= { atcBcastStormEntry 7 }
atcBcastStormTcAction OBJECT-TYPE
SYNTAX INTEGER
{
rate-control(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the protecting action which
ATC will applied to the specified port."
::= { atcBcastStormEntry 8 }
atcBcastStormAlarmFireTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the broadcast storm has been detected."
::= { atcBcastStormEntry 9 }
atcBcastStormAlarmClearTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the broadcast storm has been detected as
the normal traffic."
::= { atcBcastStormEntry 10 }
atcBcastStormTcApplyTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has to be sent when
the ATC is activated."
::= { atcBcastStormEntry 11 }
atcBcastStormTcReleaseTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has to be sent when
the ATC is released."
::= { atcBcastStormEntry 12 }
atcMcastStormTcApplyTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the timing when the ATC (Auto
Traffic Control) is activated after the broadcast traffic
being detected as the storm."
::= { atcMgt 4 }
atcMcastStormTcReleaseTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the timing when the ATC is released
after the broadcast traffic being detected as no storm."
::= { atcMgt 5 }
atcMcastStormTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtcMcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table contains the Auto Traffic Control configuration
and the status for mulicast traffic."
::= { atcMgt 6 }
atcMcastStormEntry OBJECT-TYPE
SYNTAX AtcMcastStormEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The conceptual row of the table."
INDEX { atcMcastStormIfIndex }
::= { atcMcastStormTable 1 }
AtcMcastStormEntry ::= SEQUENCE
{
atcMcastStormIfIndex Integer32,
atcMcastStormEnable EnabledStatus,
atcMcastStormAutoRelease EnabledStatus,
atcMcastStormSampleType INTEGER,
atcMcastStormCurrentTrafficRate Integer32,
atcMcastStormAlarmFireThreshold Integer32,
atcMcastStormAlarmClearThreshold Integer32,
atcMcastStormTcAction INTEGER,
atcMcastStormAlarmFireTrapStatus EnabledStatus,
atcMcastStormAlarmClearTrapStatus EnabledStatus,
atcMcastStormTcApplyTrapStatus EnabledStatus,
atcMcastStormTcReleaseTrapStatus EnabledStatus
}
atcMcastStormIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION "The specified port on which the ATC is applied."
::= { atcMcastStormEntry 1 }
atcMcastStormEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the ATC of the mulicast
traffic is applied."
::= { atcMcastStormEntry 2 }
atcMcastStormAutoRelease OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the Auto-Release feature
of ATC is applied."
::= { atcMcastStormEntry 3 }
atcMcastStormSampleType OBJECT-TYPE
SYNTAX INTEGER
{
packet-rate(1),
octet-rate(2),
percent(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the unit of traffic rate and threshold."
::= { atcMcastStormEntry 4 }
atcMcastStormCurrentTrafficRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The parameter indicates the current mulicast traffic rate."
::= { atcMcastStormEntry 5 }
atcMcastStormAlarmFireThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that if the current mulicast traffic rate
exceeds the specified threshold, it will be treated as the storm."
::= { atcMcastStormEntry 6 }
atcMcastStormAlarmClearThreshold OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates that if the current mulicast traffic
falls below the specified threshold it will be treated as the
normal traffic."
::= { atcMcastStormEntry 7 }
atcMcastStormTcAction OBJECT-TYPE
SYNTAX INTEGER
{
rate-control(1),
shutdown(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates the protecting action which
ATC will applied to the specified port."
::= { atcMcastStormEntry 8 }
atcMcastStormAlarmFireTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the mulicast storm has been detected."
::= { atcMcastStormEntry 9 }
atcMcastStormAlarmClearTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has
to be sent when the mulicast storm has been detected as
the normal traffic."
::= { atcMcastStormEntry 10 }
atcMcastStormTcApplyTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has to be sent when
the ATC is activated."
::= { atcMcastStormEntry 11 }
atcMcastStormTcReleaseTrapStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter indicates whether the trap has to be sent when
the ATC is released."
::= { atcMcastStormEntry 12 }
--
-- sysResourceMgt
--
-- monitor the configuration changes for the product
cpuStatus OBJECT IDENTIFIER ::= { sysResourceMgt 2 }
memoryStatus OBJECT IDENTIFIER ::= { sysResourceMgt 3 }
-- cpuStatus
cpuCurrentUti OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-only
STATUS current
DESCRIPTION
"The current CPU utilization in percent in the past 5 seconds."
::= { cpuStatus 1 }
cpuStatMaxUti OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-only
STATUS current
DESCRIPTION
"The maximum CPU utilization in percent in the past 60 seconds."
::= { cpuStatus 2 }
cpuStatAvgUti OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-only
STATUS current
DESCRIPTION
"The average CPU utilization in percent in the past 60 seconds."
::= { cpuStatus 3 }
cpuPeakTime OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS current
DESCRIPTION
"The time when the CPU utilization reaches cpuUtiRisingThreshold
in the format of 'Mmm _d hh:mm:ss yyyy' as defined
in sysCurrentTime of this MIB."
::= { cpuStatus 4 }
cpuPeakDuration OBJECT-TYPE
SYNTAX INTEGER
UNITS "second"
ACCESS read-only
STATUS current
DESCRIPTION
"The duration from the CPU utilization reaches cpuUtiRisingThreshold
to reaches cpuUtiFallingThreshold, in seconds."
::= { cpuStatus 5 }
cpuUtiRisingThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-write
STATUS current
DESCRIPTION
"The rising threshold of the cpu utilization."
::= { cpuStatus 6 }
cpuUtiFallingThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-write
STATUS current
DESCRIPTION
"The falling threshold of the cpu utilization."
::= { cpuStatus 7 }
-- memoryStatus
memoryTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The total amount of the memory in kilobytes."
::= { memoryStatus 1 }
memoryAllocated OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The amount of the memory allocated in kilobytes."
::= { memoryStatus 2 }
memoryFreed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The amount of the free memory in kilobytes."
::= { memoryStatus 3}
memoryFreedInPercent OBJECT-TYPE
SYNTAX INTEGER(1..100)
ACCESS read-only
STATUS current
DESCRIPTION
"the memory freed in proportion to the total memory."
::= { memoryStatus 4 }
memoryUtiRisingThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-write
STATUS current
DESCRIPTION
"The rising threshold of the memory utilization."
::= { memoryStatus 5 }
memoryUtiFallingThreshold OBJECT-TYPE
SYNTAX INTEGER(1..100)
UNITS "%"
ACCESS read-write
STATUS current
DESCRIPTION
"The falling threshold of the memory utilization."
::= { memoryStatus 6 }
--
--mvrMgt
--
mvrForwardingPriority OBJECT-TYPE
SYNTAX Integer32(0..6|65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Configure MVR multicast stream forwarding priority.
If value is 65535, it means the priority is disabled."
::= { mvrMgt 18 }
mvrDomainTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the MVR port."
::= { mvrMgt 20 }
mvrDomainEntry OBJECT-TYPE
SYNTAX MvrDomainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MVR Domain."
INDEX {mvrDomainId}
::= { mvrDomainTable 1 }
MvrDomainEntry ::= SEQUENCE
{
mvrDomainId Integer32,
mvrDomainStatus EnabledStatus,
mvrDomainRunningStatus Integer32,
mvrDomainVlanId Integer32,
mvrDomainUpstreamSourceIp IpAddress
}
mvrDomainId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Speicfies which MVR domain to configure."
::= { mvrDomainEntry 1 }
mvrDomainStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable MVR(Multicast VLAN
Registration) on the device."
::= { mvrDomainEntry 2}
mvrDomainRunningStatus OBJECT-TYPE
SYNTAX Integer32
{
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Describes the running status of MVR (Multicast VLAN Registration)
to the switch. A value of active(1) indicates that all necessary
conditions in the MVR environment are satisfied. A value of inactive(2)
indicates that some necessary conditions in the MVR environment are
not satisfied."
::= { mvrDomainEntry 3}
mvrDomainVlanId OBJECT-TYPE
SYNTAX Integer32 (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To set VLAN for MVR.The VLAN identified by a particular
value of this index is the same VLAN as identified by the
same value of dot1qVlanIndex in the Q-BRIDGE-MIB."
::= { mvrDomainEntry 4 }
mvrDomainUpstreamSourceIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the source IP address which MVR will carry in IP header when send IGMP packet to upstream router
through MVR source port."
::= { mvrDomainEntry 5 }
mvrDomainPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrDomainPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the MVR port."
::= { mvrMgt 21 }
mvrDomainPortEntry OBJECT-TYPE
SYNTAX MvrDomainPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MVR port."
INDEX {
mvrPortDomainId,
mvrDomainIfIndex
}
::= { mvrDomainPortTable 1 }
MvrDomainPortEntry ::= SEQUENCE
{
mvrPortDomainId Integer32,
mvrDomainIfIndex InterfaceIndex,
mvrDomainPortType Integer32,
mvrDomainPortImmediateLeave EnabledStatus,
mvrDomainPortActive Integer32
}
mvrPortDomainId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Speicfies which MVR domain to configure."
::= { mvrDomainPortEntry 1 }
mvrDomainIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port interface of the portTable. The interface
identified by a particular value of this index is the
same interface as identified by the same value of ifIndex
in the IF-MIB."
::= { mvrDomainPortEntry 2 }
mvrDomainPortType OBJECT-TYPE
SYNTAX Integer32
{
none(0),
source(1),
receiver(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "For configuring the MVR port type. To disable the MVR
port type, use the none(0)."
::= { mvrDomainPortEntry 3 }
mvrDomainPortImmediateLeave OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "To enable immediate leave on MVR port."
::= { mvrDomainPortEntry 4 }
mvrDomainPortActive OBJECT-TYPE
SYNTAX Integer32
{
active(1),
inactive(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "To indicate if the port is associated with the MVR group.
If the port is the MVR receiver port or the MVR source
port in MVR vlan, the status is active(1); otherwise
the status is inactive(2)."
::= { mvrDomainPortEntry 5 }
mvrProfileTable OBJECT IDENTIFIER ::= {mvrMgt 22 }
mvrProfileCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrProfileCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MVR profile."
::= { mvrProfileTable 1 }
MvrProfileCtlEntry ::= SEQUENCE
{
mvrProfileCtlId Integer32,
mvrProfileName DisplayString,
mvrProfileCtlAction Integer32
}
mvrProfileCtlEntry OBJECT-TYPE
SYNTAX MvrProfileCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MVR profile."
INDEX {mvrProfileCtlId}
::= { mvrProfileCtlTable 1 }
mvrProfileCtlId OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which MVR profile"
::= { mvrProfileCtlEntry 1 }
mvrProfileName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MVR Profile name which identify a group range.
NOTE: All mvrProfileCtlEntry use the same buffer to temply store the mvrProfileName before
mvrProfileCtlAction really creat the profile."
::= { mvrProfileCtlEntry 2 }
mvrProfileCtlAction OBJECT-TYPE
SYNTAX Integer32
{
noAction(0),
create(1),
destory(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this object to create(2) to create profile. Set this object
to destory(3) to delete profile. When
the action is complete, this object becomes noAction(1)."
::= { mvrProfileCtlEntry 5 }
mvrProfileGroupCtlTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrProfileGroupCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the MVR group ranges for MVR profile."
::= { mvrProfileTable 2 }
MvrProfileGroupCtlEntry ::= SEQUENCE
{
mvrProfileGropuCtlProfileId Integer32,
mvrProfileGroupCtlId Integer32,
mvrProfileGroupStartIPAddress IpAddress,
mvrProfileGroupEndIPAddress IpAddress,
mvrProfileGroupCtlAction Integer32
}
mvrProfileGroupCtlEntry OBJECT-TYPE
SYNTAX MvrProfileGroupCtlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the group ranges on MVR profile."
INDEX {mvrProfileGropuCtlProfileId, mvrProfileGroupCtlId}
::= { mvrProfileGroupCtlTable 1 }
mvrProfileGropuCtlProfileId OBJECT-TYPE
SYNTAX Integer32 (0..31)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which MVR profile"
::= {mvrProfileGroupCtlEntry 1}
mvrProfileGroupCtlId OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which group range in MVR profile"
::= { mvrProfileGroupCtlEntry 2 }
mvrProfileGroupStartIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MVR Profile range start IP address.
NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileStartIPAddress before
mvrProfileGroupCtlAction really creat the group rang on profile."
::= { mvrProfileGroupCtlEntry 3}
mvrProfileGroupEndIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MVR Profile range end IP address.
NOTE: All mvrProfileGroupCtlEntry use the same buffer to temply store the mvrProfileEndIPAddress before
mvrProfileGroupCtlAction really creat the group rang on profile."
::= { mvrProfileGroupCtlEntry 4 }
mvrProfileGroupCtlAction OBJECT-TYPE
SYNTAX Integer32
{
noAction(0),
create(1),
destory(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this object to create(2) to create group range. Set this object
to destory(3) to delete group range. When
the action is complete, this object becomes noAction(1).
NOTE: If mvrProfileGroupStartIPAddress and mvrProfileGroupEndIPAddress
pattern already exist on other mvrProfileGroupCtlId, it won't be stored.
"
::= { mvrProfileGroupCtlEntry 5 }
mvrDomainAssociatedProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrDomainAssociatedProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Configure MVR domain associate which MVR profile"
::= {mvrMgt 23 }
mvrDomainAssociatedProfileEntry OBJECT-TYPE
SYNTAX MvrDomainAssociatedProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring MVR domain associate MVR profile."
INDEX {
mvrProfileDomainId,
mvrProfileId
}
::= { mvrDomainAssociatedProfileTable 1 }
MvrDomainAssociatedProfileEntry ::= SEQUENCE
{
mvrProfileDomainId Integer32,
mvrProfileId Integer32,
mvrProfileAction Integer32
}
mvrProfileDomainId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which MVR profile"
::= { mvrDomainAssociatedProfileEntry 1 }
mvrProfileId OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which MVR profile"
::= { mvrDomainAssociatedProfileEntry 2 }
mvrProfileAction OBJECT-TYPE
SYNTAX Integer32
{
noAction(0),
create(1),
destory(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this object to create(1) to associate profile. Set this object
to destory(2) to deassociate profile. When
the action is complete, this object becomes noAction(0)."
::= { mvrDomainAssociatedProfileEntry 3 }
mvrDomainGroupStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrDomainGroupStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for configuring the static members of the
MVR group."
::= { mvrMgt 24 }
mvrDomainGroupStaticEntry OBJECT-TYPE
SYNTAX MvrDomainGroupStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for configuring the static members of the
MVR group."
INDEX {
mvrGroupStaticDomainId,
mvrDomainGroupStaticAddress,
mvrDomainGroupStaticReceiverVlan}
::= { mvrDomainGroupStaticTable 1 }
MvrDomainGroupStaticEntry ::= SEQUENCE
{
mvrGroupStaticDomainId Integer32,
mvrDomainGroupStaticAddress IpAddress,
mvrDomainGroupStaticReceiverVlan Integer32,
mvrDomainGroupStaticPorts PortList
}
mvrGroupStaticDomainId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which MVR profile"
::= { mvrDomainGroupStaticEntry 1 }
mvrDomainGroupStaticAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The multicast address of the MVR group."
::= { mvrDomainGroupStaticEntry 2 }
mvrDomainGroupStaticReceiverVlan OBJECT-TYPE
SYNTAX Integer32(1..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The receiver vlan of this MVR group"
::= { mvrDomainGroupStaticEntry 3 }
mvrDomainGroupStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The set of ports configured by management in this entry.
Ports entered in this list will be the static members
of this MVR group."
::= { mvrDomainGroupStaticEntry 4 }
mvrDomainGroupCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF MvrDomainGroupCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The table for the current members of the MVR group."
::= { mvrMgt 25 }
mvrDomainGroupCurrentEntry OBJECT-TYPE
SYNTAX MvrDomainGroupCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The entry for the current members of the MVR group."
INDEX {
mvrGroupCurrenDomainId,
mvrDomainGroupCurrentAddress,
mvrDomainGroupCurrentReceiverVlan
}
::= { mvrDomainGroupCurrentTable 1 }
MvrDomainGroupCurrentEntry ::= SEQUENCE
{
mvrGroupCurrenDomainId Integer32,
mvrDomainGroupCurrentAddress IpAddress,
mvrDomainGroupCurrentReceiverVlan Integer32,
mvrDomainGroupCurrentPorts PortList
}
mvrGroupCurrenDomainId OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Profile ID to index which MVR profile"
::= { mvrDomainGroupCurrentEntry 1 }
mvrDomainGroupCurrentAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The multicast address of the MVR group."
::= { mvrDomainGroupCurrentEntry 2 }
mvrDomainGroupCurrentReceiverVlan OBJECT-TYPE
SYNTAX Integer32(1..4093)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the receiver VLAN of the MVR group."
::= { mvrDomainGroupCurrentEntry 3 }
mvrDomainGroupCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The complete set of ports currently associated with this
MVR group."
::= { mvrDomainGroupCurrentEntry 4 }
mvrProxySwitching OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable MVR(Multicast VLAN
Registration) proxy switching ability on the device. "
::= { mvrMgt 27 }
mvrRobustnessValue OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Paremete to set IGMP robustness value.
This value apply to proxy-switching for how many IGMP report/leave will be send out from source port,
and how many g-s query will be send on receiver port.
"
::= { mvrMgt 28 }
mvrProxyQueryInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set the query interval that active receiver port will use to send out general query "
::= { mvrMgt 29 }
mvrSourcePortmode OBJECT-TYPE
SYNTAX Integer32
{
dynamic(0),
forward(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Paremete to set MVR Source Port forward mode.
When set dynamic, MVR source port won't forward multicast streams received from other source port.
When set forward, MVR source port will forward multicast streams received from other source port.
These multicast stream all are in MVR group range.
"
::= { mvrMgt 30 }
--
-- dhcpSnoopMgt
--
-- Management of DHCP snooping and IP souce guard.
dhcpSnoopGlobal OBJECT IDENTIFIER ::= { dhcpSnoopMgt 1 }
dhcpSnoopVlan OBJECT IDENTIFIER ::= { dhcpSnoopMgt 2 }
dhcpSnoopInterface OBJECT IDENTIFIER ::= { dhcpSnoopMgt 3 }
dhcpSnoopBindings OBJECT IDENTIFIER ::= { dhcpSnoopMgt 4 }
dhcpSnoopStatistics OBJECT IDENTIFIER ::= { dhcpSnoopMgt 5 }
dhcpSnoopEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the DHCP Snooping feature is
enabled."
::= { dhcpSnoopGlobal 1 }
dhcpSnoopVerifyMacAddressEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether DHCP Snooping Mac address
verification is enabled."
::= { dhcpSnoopGlobal 2 }
dhcpSnoopInformationOptionEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the DHCP snooping information option(option 82) feature is
enabled."
::= { dhcpSnoopGlobal 3 }
dhcpSnoopInformationOptionPolicy OBJECT-TYPE
SYNTAX INTEGER
{
drop(1),
keep(2),
replace(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates which reforwarding policy shall be used for DHCP
snooping information option(option 82). A value of drop(1) means to drop
the DHCP request packet which has the information option(option 82).
A value of keep(2) means to keep the existing information option(option 82)
of the DHCP request packet. A value of replace(3), which is the default value,
means to replace the existing information option(option 82) of the DHCP
request packet."
::= { dhcpSnoopGlobal 4 }
dhcpSnoopBindingsTableCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAction(1),
store(2),
clear(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set this to store(2) to store DHCP snooping binding entries to flash.
Set this to clear(3) to clear DHCP snooping binding entries from flash.
noAction(1) will always be obtained when reading this variable."
::= { dhcpSnoopGlobal 5 }
--
dhcpSnoopVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains DHCP Snooping configurations of existing VLANs."
::= { dhcpSnoopVlan 1 }
dhcpSnoopVlanConfigEntry OBJECT-TYPE
SYNTAX DhcpSnoopVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the configuration to enable
or disable DHCP Snooping at each existing VLAN."
INDEX { dhcpSnoopVlanIndex }
::= { dhcpSnoopVlanConfigTable 1 }
DhcpSnoopVlanConfigEntry ::= SEQUENCE
{
dhcpSnoopVlanIndex VlanIndex,
dhcpSnoopVlanEnable EnabledStatus
}
dhcpSnoopVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN ID on which DHCP Snooping
feature is configured."
::= { dhcpSnoopVlanConfigEntry 1 }
dhcpSnoopVlanEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether DHCP Snooping is enabled in
this VLAN."
::= { dhcpSnoopVlanConfigEntry 2 }
--
dhcpSnoopPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table provides the mechanism to configure the trust
state of each port or trunk for DHCP Snooping purpose."
::= { dhcpSnoopInterface 1 }
dhcpSnoopPortConfigEntry OBJECT-TYPE
SYNTAX DhcpSnoopPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCP Snooping purpose."
INDEX { dhcpSnoopPortIfIndex }
::= { dhcpSnoopPortConfigTable 1 }
DhcpSnoopPortConfigEntry ::= SEQUENCE
{
dhcpSnoopPortIfIndex InterfaceIndex,
dhcpSnoopPortTrustEnable EnabledStatus
}
dhcpSnoopPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the port or trunk."
::= { dhcpSnoopPortConfigEntry 1 }
dhcpSnoopPortTrustEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the port or trunk is trusted
for DHCP Snooping purpose."
::= { dhcpSnoopPortConfigEntry 2 }
--
dhcpSnoopBindingsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DhcpSnoopBindingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the DHCP bindings information learnt by
the device."
::= { dhcpSnoopBindings 1 }
dhcpSnoopBindingsEntry OBJECT-TYPE
SYNTAX DhcpSnoopBindingsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status."
INDEX { dhcpSnoopBindingsVlanIndex, dhcpSnoopBindingsMacAddress }
::= { dhcpSnoopBindingsTable 1 }
DhcpSnoopBindingsEntry ::= SEQUENCE
{
dhcpSnoopBindingsVlanIndex VlanIndex,
dhcpSnoopBindingsMacAddress MacAddress,
dhcpSnoopBindingsAddrType InetAddressType,
dhcpSnoopBindingsEntryType INTEGER,
dhcpSnoopBindingsIpAddress IpAddress,
dhcpSnoopBindingsPortIfIndex InterfaceIndex,
dhcpSnoopBindingsLeaseTime Unsigned32
}
dhcpSnoopBindingsVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN which a DHCP client host
belongs to."
::= { dhcpSnoopBindingsEntry 1 }
dhcpSnoopBindingsMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the MAC address of a DHCP client
host."
::= { dhcpSnoopBindingsEntry 2 }
dhcpSnoopBindingsAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the type of IP address denoted in
dhcpSnoopBindingsIpAddress type."
::= { dhcpSnoopBindingsEntry 3 }
dhcpSnoopBindingsEntryType OBJECT-TYPE
SYNTAX INTEGER { dynamic(1), static(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates that this binding is obtained from
dynamically learning or is a static configuraion."
::= { dhcpSnoopBindingsEntry 4 }
dhcpSnoopBindingsIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the allocated IP address of
a DHCP client host."
::= { dhcpSnoopBindingsEntry 5 }
dhcpSnoopBindingsPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the port or trunk where a DHCP client
host connects to."
::= { dhcpSnoopBindingsEntry 6 }
dhcpSnoopBindingsLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the leased time of this DHCP
bindings."
::= { dhcpSnoopBindingsEntry 7 }
--
dhcpSnoopTotalForwardedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of packets subjected to
DHCP Snooping is forwarded."
::= { dhcpSnoopStatistics 1 }
dhcpSnoopUntrustedPortDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the number of packets subjected to DHCP Snooping
is dropped because they come from untrusted interface."
::= { dhcpSnoopStatistics 3 }
--
-- clusterMgt
--
clusterEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables clustering on the device."
::= { clusterMgt 1 }
clusterCommanderEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables the device as commander in a cluster."
::= { clusterMgt 2 }
clusterIpPool OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start internal IP address of a cluster pool."
::= { clusterMgt 4 }
clusterClearCandidateTable OBJECT-TYPE
SYNTAX INTEGER
{
noClear(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to clear(2) starts to clear the candidate table."
::= { clusterMgt 5 }
clusterRole OBJECT-TYPE
SYNTAX INTEGER
{
commander(1),
candidate(2),
activeMember(3),
disabled(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current role of the device in a cluster.
commander(1) : The switch is the controlling device in a
cluster.
candidate(2) : The switch has been discovered by the commander,
but it has not been manually configured
for access from the commander.
activeMember(3): The switch has been manually configured for access
from the commander and it is active
in the cluster.
disabled(5) : The switch has clustering disabled."
::= { clusterMgt 6 }
clusterMemberCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of members in a cluster."
::= { clusterMgt 7 }
clusterCandidateCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of candidates in a cluster."
::= { clusterMgt 8 }
clusterCandidateTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClusterCandidateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing cluster candidates."
::= { clusterMgt 9 }
clusterCandidateEntry OBJECT-TYPE
SYNTAX ClusterCandidateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the information of the candidate."
INDEX { clusterCandidateMacAddr}
::= { clusterCandidateTable 1 }
ClusterCandidateEntry ::=
SEQUENCE {
clusterCandidateMacAddr MacAddress,
clusterCandidateDesc DisplayString,
clusterCandidateRole INTEGER
}
clusterCandidateMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the candidate."
::= {clusterCandidateEntry 1 }
clusterCandidateDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..42))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the candidate."
::= {clusterCandidateEntry 3 }
clusterCandidateRole OBJECT-TYPE
SYNTAX INTEGER
{
candidate(2),
activeMember(3),
inactiveMember(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role of the candidate.
candidate(2) : The switch is discovered by the commander,
but it has not been manually configured for
access from the commander.
activeMember(3) : The switch is manually configured for access
from the commander and it is active in the
cluster.
inactiveMember(4): The switch is manually configured for access
from the commander, but it is inactive in
the cluster."
::= {clusterCandidateEntry 4 }
clusterMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClusterMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table listing clustering members."
::= { clusterMgt 10 }
clusterMemberEntry OBJECT-TYPE
SYNTAX ClusterMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row containing the information of the member."
INDEX { clusterMemberId}
::= { clusterMemberTable 1 }
ClusterMemberEntry ::=
SEQUENCE {
clusterMemberId Unsigned32,
clusterMemberMacAddr MacAddress,
clusterMemberDesc DisplayString,
clusterMemberActive INTEGER
}
clusterMemberId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of the member."
::= {clusterMemberEntry 1 }
clusterMemberMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the member."
::= {clusterMemberEntry 2 }
clusterMemberDesc OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..42))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The description of the member."
::= {clusterMemberEntry 3 }
clusterMemberActive OBJECT-TYPE
SYNTAX INTEGER
{
activeMember(3),
inactiveMember(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active status of the member.
activeMember(3) : The switch is manually configured for access
from the commander and it is active in the
cluster.
inactiveMember(4): The switch is manually configured for access
from the commander, but it is inactive in
the cluster."
::= {clusterMemberEntry 4 }
clusterMemberAddCtl OBJECT IDENTIFIER ::= { clusterMgt 11 }
clusterMemberAddCtlMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The MAC address of the device associated with clusterMemberAddCtlAction."
::= { clusterMemberAddCtl 1 }
clusterMemberAddCtlId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The member id associated with clusterMemberAddCtlAction."
::= { clusterMemberAddCtl 2 }
clusterMemberAddCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noAdd(1),
add(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Adds the device to members that can be accessed from the commander.
The MAC of the device is the current value of
clusterMemberAddCtlMacAddr and the assigned member ID is the current
value of clusterMemberAddCtlId. Set this object to add(2) to begin
adding the member."
::= { clusterMemberAddCtl 5 }
clusterMemberRemoveCtl OBJECT IDENTIFIER ::= { clusterMgt 12 }
clusterMemberRemoveCtlId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The member ID associated with clusterMemberRemoveCtlAction."
::= { clusterMemberRemoveCtl 1 }
clusterMemberRemoveCtlAction OBJECT-TYPE
SYNTAX INTEGER
{
noRemove(1),
remove(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Removes the device from members that can be accessed from the commander.
The member ID is the current value of clusterMemberRemoveCtlId.
Set this object to remove(2) to begin removing the member."
::= { clusterMemberRemoveCtl 2 }
--
-- ipSrcGuardMgt
--
ipSrcGuardConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSrcGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the configurations to enable or disable
IP Source Guard at each port or trunk."
::= { ipSrcGuardMgt 1 }
ipSrcGuardConfigEntry OBJECT-TYPE
SYNTAX IpSrcGuardConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the configuration to enable
or disable IP Source Guard at each port or trunk."
INDEX { ipSrcGuardPortIfIndex }
::= { ipSrcGuardConfigTable 1 }
IpSrcGuardConfigEntry ::= SEQUENCE
{
ipSrcGuardPortIfIndex InterfaceIndex,
ipSrcGuardMode INTEGER
}
ipSrcGuardPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object idents the port or trunk which is capable of
IP Source Guard feature."
::= { ipSrcGuardConfigEntry 1 }
ipSrcGuardMode OBJECT-TYPE
SYNTAX INTEGER { diabled(0), srcIp(1), srcIpMac(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether Ip Source Guard is enabled
at this interface. If the value equals 0, it means Ip Source
Guard is disabled. If the value equals 1, it means Ip Source
Guard is enabled, and packets are filtered by checking source ip.
If the value equals 2, it means Ip Source Guard is enabled
and packets are filtered by checking source ip and source mac."
::= { ipSrcGuardConfigEntry 2 }
--
ipSrcGuardAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSrcGuardAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the IP Source Guard bindings information
learnt by the device."
::= { ipSrcGuardMgt 2 }
ipSrcGuardAddrEntry OBJECT-TYPE
SYNTAX IpSrcGuardAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the Mac address, IP address type,
IP address, VLAN number, interface number, leased time and
status."
INDEX { ipSrcGuardBindingsVlanIndex, ipSrcGuardBindingsMacAddress }
::= { ipSrcGuardAddrTable 1 }
IpSrcGuardAddrEntry ::= SEQUENCE
{
ipSrcGuardBindingsVlanIndex VlanIndex,
ipSrcGuardBindingsMacAddress MacAddress,
ipSrcGuardBindingsAddrType InetAddressType,
ipSrcGuardBindingsEntryType INTEGER,
ipSrcGuardBindingsIpAddress IpAddress,
ipSrcGuardBindingsPortIfIndex InterfaceIndex,
ipSrcGuardBindingsLeaseTime Unsigned32,
ipSrcGuardBindingsStatus RowStatus
}
ipSrcGuardBindingsVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN which a DHCP client host
belongs to."
::= { ipSrcGuardAddrEntry 1 }
ipSrcGuardBindingsMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the MAC address of a DHCP client
host."
::= { ipSrcGuardAddrEntry 2 }
ipSrcGuardBindingsAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the type of IP address denoted in
ipSrcGuardBindingsIpAddress type."
::= { ipSrcGuardAddrEntry 3 }
ipSrcGuardBindingsEntryType OBJECT-TYPE
SYNTAX INTEGER { dynamic(1), static(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates that this binding is obtained from
dynamically learning or is a static configuraion."
::= { ipSrcGuardAddrEntry 4 }
ipSrcGuardBindingsIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the allocated IP address of
a DHCP client host."
::= { ipSrcGuardAddrEntry 5 }
ipSrcGuardBindingsPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object indicates the port or trunk where a DHCP client
host connects to."
::= { ipSrcGuardAddrEntry 6 }
ipSrcGuardBindingsLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the leased time of this DHCP
bindings."
::= { ipSrcGuardAddrEntry 7 }
ipSrcGuardBindingsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The status of this conceptual row entry. This object issued to
manage the creation and deletion of conceptual rows.
The status column has six defined values: - 'active', which
indicates that the conceptual row is available for use by the
managed device; - 'notInService', which indicates that the
conceptual row exists in the agent, but is unavailable for use
by the managed device."
::= { ipSrcGuardAddrEntry 8 }
--
-- upnpMgt
--
upnpStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets enabled(1) to enable UPnP device, and sets disabled(2) to
disable UPnP device."
::= { upnpMgt 1 }
upnpAdvertisingDuration OBJECT-TYPE
SYNTAX Integer32 (60..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval(in seconds) between available UPnP device advertising
messages sent by the switch."
::= { upnpMgt 2 }
upnpTtl OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the TTL value of the UPnP advertising messages sent by
the switch. When the TTL value is greater than 1, it is possible
to send UPnP advertising messages to traverse multiple routers;
at the same time, the UPnP device will send an IGMP Join message
to the traverse multiple routers so that the routers will forward
multicast messages to the UPnP device."
::= { upnpMgt 3 }
--
-- dynamicArpInspectionMgt
--
daiGlobal OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 1 }
daiVlan OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 2 }
daiInterface OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 3 }
daiLog OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 4 }
daiStatistics OBJECT IDENTIFIER ::= { dynamicArpInspectionMgt 5 }
daiGlobalStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable dynamic ARP inspection.
Set disabled(2) to disable dynamic ARP inspection."
::= { daiGlobal 1 }
daiGlobalSrcMacValidation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable validation of source MAC address.
Set disabled(2) to disable validation of source MAC
address."
::= { daiGlobal 2 }
daiGlobalDestMacValidation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable validation of destination
MAC address. Set disabled(2) to disable validation
of destination MAC address."
::= { daiGlobal 3 }
daiGlobalIpAddrValidation OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable validation of IP address.
Set disabled(2) to disable validation of IP address."
::= { daiGlobal 4 }
daiGlobalLogNumber OBJECT-TYPE
SYNTAX Integer32(0..256)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The number of log buffers for saving log message.
The value 0 means not generating system messages."
::= { daiGlobal 5 }
daiGlobalLogInterval OBJECT-TYPE
SYNTAX Integer32(0..86400)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of the time interval for saving log messages."
::= { daiGlobal 6 }
daiGlobalAdditionalValidStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The vaule of this object is disabled(2) when the status of
daiGlobalSrcMacValidation, daiGlobalDestMacValidation,
and daiGlobalIpAddrValidation are disabled; enabled(1)
when one or more of these variables are enabled."
::= { daiGlobal 7 }
daiVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF DaiVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains dynamic ARP inspection configurations
for existing VLANs."
::= { daiVlan 1 }
daiVlanEntry OBJECT-TYPE
SYNTAX DaiVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance containing the configuration of dynamic ARP
inspection for each existing VLAN."
INDEX { daiVlanIndex }
::= { daiVlanTable 1 }
DaiVlanEntry ::= SEQUENCE
{
daiVlanIndex VlanIndex,
daiVlanStatus EnabledStatus,
daiVlanArpAclName DisplayString,
daiVlanArpAclStatus INTEGER
}
daiVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN ID on which dynamic ARP
inspection is configured."
::= { daiVlanEntry 1 }
daiVlanStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether dynamic ARP inspection
is enabled in this VLAN."
::= { daiVlanEntry 2 }
daiVlanArpAclName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..15))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies the ARP ACL name bound to the interface.
The default value of daiVlanArpAclStatus is dynamic(2)."
::= { daiVlanEntry 3 }
daiVlanArpAclStatus OBJECT-TYPE
SYNTAX INTEGER
{
static(1),
dynamic(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set to static(1) means packets not matching the ACL are
dropped. Set to dynamic(2) means packets not matching the
ACL are validated by the DHCP snooping binding table.
When daiVlanArpAclName is configured, the default value
of daiVlanArpAclStatus is dynamic(2)."
::= { daiVlanEntry 4 }
daiPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DaiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing dynamic ARP inspection configurations
for port interfaces."
::= { daiInterface 1 }
daiPortEntry OBJECT-TYPE
SYNTAX DaiPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance containing the configuration of dynamic ARP
inspection at each port interface."
INDEX { daiPortIfIndex }
::= { daiPortTable 1 }
DaiPortEntry ::= SEQUENCE
{
daiPortIfIndex InterfaceIndex,
daiPortTrustStatus EnabledStatus,
daiPortRateLimit Unsigned32
}
daiPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the port."
::= { daiPortEntry 1 }
daiPortTrustStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the port is trusted for
dynamic ARP inspection."
::= { daiPortEntry 2 }
daiPortRateLimit OBJECT-TYPE
SYNTAX Unsigned32(0..2048|'FFFFFFFF'h)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The value of rate limit threshold per second of disposing
ARP messages. Set the value 0xFFFFFFFF as no rate limit."
::= { daiPortEntry 3 }
daiLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF DaiLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing dynamic ARP inspection log
information."
::= { daiLog 1 }
daiLogEntry OBJECT-TYPE
SYNTAX DaiLogEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance containing log information of dynamic ARP
inspection at each VLAN interface."
INDEX { daiLogIndex }
::= { daiLogTable 1 }
DaiLogEntry ::= SEQUENCE
{
daiLogIndex Integer32,
daiLogVlan VlanIndex,
daiLogPort InterfaceIndex,
daiLogSrcIpAddress IpAddress,
daiLogDestIpAddress IpAddress,
daiLogSrcMacAddress MacAddress,
daiLogDestMacAddress MacAddress
}
daiLogIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the index of dynamic ARP
inspection log information."
::= { daiLogEntry 1 }
daiLogVlan OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the VLAN ID of dynamic ARP
inspection log information."
::= { daiLogEntry 2 }
daiLogPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the ifIndex of dynamic ARP
inspection log information."
::= { daiLogEntry 3 }
daiLogSrcIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The source IP address of dynamic ARP inspection
log information."
::= { daiLogEntry 4 }
daiLogDestIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The destination IP address of dynamic ARP inspection
log information."
::= { daiLogEntry 5 }
daiLogSrcMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The source MAC address of dynamic ARP inspection
log information."
::= { daiLogEntry 6 }
daiLogDestMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The destination MAC address of dynamic ARP inspection
log information."
::= { daiLogEntry 7 }
daiTotalReceivedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets received
before rate limiting."
::= { daiStatistics 1 }
daiTotalDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
due to rate limt."
::= { daiStatistics 2 }
daiTotalProcessedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets processed
by ARP inspection."
::= { daiStatistics 3 }
daiTotalSrcMacDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by source MAC address validation."
::= { daiStatistics 4 }
daiTotalDestMacDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by destination MAC address validation."
::= { daiStatistics 5 }
daiTotalIpAddrDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by IP address validation."
::= { daiStatistics 6 }
daiTotalArpAclDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by ARP ACL."
::= { daiStatistics 7 }
daiTotalDhcpSnoopingDroppedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of ARP packets dropped
by DHCP snooping."
::= { daiStatistics 8 }
--
-- PPPoE Intermediate Agent
--
pppoeiaGlobal OBJECT IDENTIFIER ::= { pppoeiaMgt 1 }
pppoeiaGlobalStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable global status of PPPoE
Intermediate Agent. Set disbaled(2) to disable
global status of PPPoE Intermediate Agent."
::= { pppoeiaGlobal 1 }
pppoeiaGlobalAccessNodeId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..48))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies access node identifier. Use empty to revert to
default value."
::= { pppoeiaGlobal 2 }
pppoeiaGlobalOperAccessNodeId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational access node identifier."
::= { pppoeiaGlobal 3 }
pppoeiaGlobalGenericErrorMsg OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..127))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies generic error message. Use empty to revert to
default value."
::= { pppoeiaGlobal 4 }
pppoeiaGlobalOperGenericErrorMsg OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational generic error message."
::= { pppoeiaGlobal 5 }
pppoeiaGlobalClearStatisticsAction OBJECT-TYPE
SYNTAX INTEGER
{
clear(1),
noClear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable is used to clear the counters of all
interfaces. Set clear(1) to perform the clear operation.
The value noClear(2) will always be displayed when reading."
::= { pppoeiaGlobal 6 }
pppoeiaPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PppoeiaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration in PPPoE Intermediate Agent."
::= { pppoeiaMgt 2 }
pppoeiaPortEntry OBJECT-TYPE
SYNTAX PppoeiaPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration in PPPoE Intermediate Agent."
INDEX { pppoeiaPortIndex }
::= { pppoeiaPortTable 1 }
PppoeiaPortEntry ::= SEQUENCE
{
pppoeiaPortIndex Integer32,
pppoeiaPortStatus EnabledStatus,
pppoeiaPortTrustStatus EnabledStatus,
pppoeiaPortVendorTagStrip EnabledStatus,
pppoeiaPortCircuitId DisplayString,
pppoeiaPortOperCircuitId DisplayString,
pppoeiaPortRemoteId DisplayString,
pppoeiaPortOperRemoteId DisplayString
}
pppoeiaPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { pppoeiaPortEntry 1 }
pppoeiaPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to enable/disable PPPoE
Intermediate Agent on interfaces."
::= { pppoeiaPortEntry 2 }
pppoeiaPortTrustStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to enable/disable trust mode of
PPPoE Intermediate Agent on interfaces."
::= { pppoeiaPortEntry 3 }
pppoeiaPortVendorTagStrip OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to enable/disable stripping of
vendor tag status of PPPoE Intermediate Agent on
interfaces."
::= { pppoeiaPortEntry 4 }
pppoeiaPortCircuitId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies circuit ID of PPPoE Intermediate Agent on
interfaces. Use empty to revert to default value."
::= { pppoeiaPortEntry 5 }
pppoeiaPortOperCircuitId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational circuit ID of PPPoE Intermediate Agent on
interfaces."
::= { pppoeiaPortEntry 6 }
pppoeiaPortRemoteId OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Specifies remote ID of PPPoE Intermediate Agent on
interfaces. Use empty to revert to default value."
::= { pppoeiaPortEntry 7 }
pppoeiaPortOperRemoteId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational remote ID of PPPoE Intermediate Agent on
interfaces."
::= { pppoeiaPortEntry 8 }
pppoeiaPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PppoeiaPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port statistics in PPPoE Intermediate Agent."
::= { pppoeiaMgt 3 }
pppoeiaPortStatsEntry OBJECT-TYPE
SYNTAX PppoeiaPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port statistics in PPPoE Intermediate Agent."
INDEX { pppoeiaPortStatsIndex }
::= { pppoeiaPortStatsTable 1 }
PppoeiaPortStatsEntry ::= SEQUENCE
{
pppoeiaPortStatsIndex Integer32,
pppoeiaPortStatsRecvPkts Counter32,
pppoeiaPortStatsRecvPadiPkts Counter32,
pppoeiaPortStatsRecvPadoPkts Counter32,
pppoeiaPortStatsRecvPadrPkts Counter32,
pppoeiaPortStatsRecvPadsPkts Counter32,
pppoeiaPortStatsRecvPadtPkts Counter32,
pppoeiaPortStatsDropUntrustRespPkts Counter32,
pppoeiaPortStatsDropUntrustReqPkts Counter32,
pppoeiaPortStatsDropMalformedPkts Counter32,
pppoeiaPortStatsClearAction INTEGER
}
pppoeiaPortStatsIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { pppoeiaPortStatsEntry 1 }
pppoeiaPortStatsRecvPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of received packets of the
interface."
::= { pppoeiaPortStatsEntry 2 }
pppoeiaPortStatsRecvPadiPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of received PPPoE Active
Discovery Initiation packets of the interface."
::= { pppoeiaPortStatsEntry 3 }
pppoeiaPortStatsRecvPadoPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of received PPPoE Active
Discovery Offer packets of the interface."
::= { pppoeiaPortStatsEntry 4 }
pppoeiaPortStatsRecvPadrPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of received PPPoE Active
Discovery Request packets of the interface."
::= { pppoeiaPortStatsEntry 5 }
pppoeiaPortStatsRecvPadsPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of received PPPoE Active
Discovery Session-confirmation packets of the interface."
::= { pppoeiaPortStatsEntry 6 }
pppoeiaPortStatsRecvPadtPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of received PPPoE Active
Discovery Terminate packets of the interface."
::= { pppoeiaPortStatsEntry 7 }
pppoeiaPortStatsDropUntrustRespPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of response packets
dropped because they were untrusted."
::= { pppoeiaPortStatsEntry 8 }
pppoeiaPortStatsDropUntrustReqPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of request packets
dropped because they were untrusted."
::= { pppoeiaPortStatsEntry 9 }
pppoeiaPortStatsDropMalformedPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the total number of malformed packets
dropped because they were untrusted."
::= { pppoeiaPortStatsEntry 10 }
pppoeiaPortStatsClearAction OBJECT-TYPE
SYNTAX INTEGER
{
clear(1),
noClear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This variable is used to clear the counters of specified
interface. Set clear(1) to perform the clear operation.
The value noClear(2) will always be displayed when reading."
::= { pppoeiaPortStatsEntry 11 }
--
-- IPv6 RA Guard
--
ipv6RaGuardPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF Ipv6RaGuardPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for IPv6 RA Guard port configuration."
::= { ipv6RaGuardMgt 1 }
ipv6RaGuardPortEntry OBJECT-TYPE
SYNTAX Ipv6RaGuardPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for IPv6 RA Guard port configuration."
INDEX { ipv6RaGuardPortIndex }
::= { ipv6RaGuardPortTable 1 }
Ipv6RaGuardPortEntry ::= SEQUENCE
{
ipv6RaGuardPortIndex Integer32,
ipv6RaGuardPortStatus INTEGER
}
ipv6RaGuardPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port and the trunk (excluding trunk members) interface of
the portTable. The interface identified by a particular value
of this index is the same interface as identified by the same
value of ifIndex in the IF-MIB."
::= { ipv6RaGuardPortEntry 1 }
ipv6RaGuardPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A value of enabled (1) indicates that IPv6 RA Guard feature
is enabled on interfaces. A value of disabled (2) indicates
that the feature is disabled."
::= { ipv6RaGuardPortEntry 2 }
--
-- lbdMgt
--
lbdGlobal OBJECT IDENTIFIER ::= { lbdMgt 1 }
lbdInterface OBJECT IDENTIFIER ::= { lbdMgt 2 }
lbdGlobalStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set enabled(1) to enable global LBD status.
Set disabled(2) to disable global LBD status."
::= { lbdGlobal 1 }
lbdTransmitInterval OBJECT-TYPE
SYNTAX Unsigned32(1..32767)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The transmission interval for LBD control frames."
::= { lbdGlobal 2 }
lbdRecoverTime OBJECT-TYPE
SYNTAX Unsigned32(0|60..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The recover time used by LBD auto recovery mechanism. A
value of 0 disables auto recovery."
::= { lbdGlobal 3 }
lbdMode OBJECT-TYPE
SYNTAX INTEGER { port-based(1), VLAN-based(2) }
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION "The detection mode of LBD."
::= { lbdGlobal 4 }
lbdAction OBJECT-TYPE
SYNTAX INTEGER { none(1), shutdown(2), block(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The protection action of LBD."
::= { lbdGlobal 5 }
lbdTrap OBJECT-TYPE
SYNTAX INTEGER { none(1), detect(2), recover(3), both(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The kind of SNMP traps for LBD will be sent."
::= { lbdGlobal 6 }
lbdPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LbdPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table containing LBD configurations for all interfaces."
::= { lbdInterface 1 }
lbdPortEntry OBJECT-TYPE
SYNTAX LbdPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance containing the configuration of LBD at each
interface."
INDEX { lbdPortIfIndex }
::= { lbdPortTable 1 }
LbdPortEntry ::= SEQUENCE
{
lbdPortIfIndex InterfaceIndex,
lbdPortAdminState INTEGER,
lbdPortOperState INTEGER,
lbdPortLoopedVlan OCTET STRING
}
lbdPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the port."
::= { lbdPortEntry 1 }
lbdPortAdminState OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The LBD administrative port status."
::= { lbdPortEntry 2 }
lbdPortOperState OBJECT-TYPE
SYNTAX INTEGER { normal(1), looped(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The LBD operative port status."
::= { lbdPortEntry 3 }
lbdPortLoopedVlan OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The list of VLANs on which loopback is detected. Only when
oper state is looped and mode is VLAN-based, the value is
nonzero."
::= { lbdPortEntry 4 }
--
-- udldMgt
--
udldGlobalMessageInterval OBJECT-TYPE
SYNTAX INTEGER(7..90)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The message interval (in seconds) between UDLD probe
messages on ports that are in advertisement phase and are
determined to be bidirectional."
DEFVAL { 15 }
::= { udldMgt 1 }
udldPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF UdldPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for port configuration of UDLD."
::= { udldMgt 2 }
udldPortEntry OBJECT-TYPE
SYNTAX UdldPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for port configuration of UDLD."
INDEX { udldPortIndex }
::= { udldPortTable 1 }
UdldPortEntry ::= SEQUENCE
{
udldPortIndex Integer32,
udldPortStatus EnabledStatus,
udldPortAggressiveStatus EnabledStatus,
udldPortOperState INTEGER,
udldPortPortState INTEGER,
udldPortOperMessageInterval INTEGER,
udldPortOperTimeout INTEGER,
udldPortNeighborDevCount INTEGER
}
udldPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port (excluding trunk and trunk members)
interface of the portTable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of ifIndex in the IF-MIB."
::= { udldPortEntry 1 }
udldPortStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to enable/disable UDLD
on this interface."
::= { udldPortEntry 2 }
udldPortAggressiveStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This parameter is used to enable/disable aggressive mode of
UDLD on this interface."
::= { udldPortEntry 3 }
udldPortOperState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
linkDown(2),
linkUp(3),
advertisement(4),
detection(5),
disabledPort(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational state of UDLD on this interface."
::= { udldPortEntry 4 }
udldPortPortState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
neighborsEchoIsEmpty(2),
bidirectional(3),
mismatchWithneighborStateReported(4),
transmitToReceiveLoop(5),
unidirectional(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port state of UDLD on this interface."
::= { udldPortEntry 5 }
udldPortOperMessageInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational message interval (in seconds) used by UDLD
on this interface."
::= { udldPortEntry 6 }
udldPortOperTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The operational timeout interval (in seconds) used by UDLD
to decide the basic length of the detection phase on
this interface."
::= { udldPortEntry 7 }
udldPortNeighborDevCount OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The total number of neighbor devices discovered on this
interface."
::= { udldPortEntry 8 }
udldPortNeighborDevTable OBJECT-TYPE
SYNTAX SEQUENCE OF UdldPortNeighborDevEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of neighbor devices discovered by UDLD
for each interface."
::= { udldMgt 3 }
udldPortNeighborDevEntry OBJECT-TYPE
SYNTAX UdldPortNeighborDevEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A conceptual row containing the information
of a neighbor device."
INDEX { udldPortNeighborDevPortIndex, udldPortNeighborDevIndex }
::= { udldPortNeighborDevTable 1 }
UdldPortNeighborDevEntry ::= SEQUENCE
{
udldPortNeighborDevPortIndex Integer32,
udldPortNeighborDevIndex Integer32,
udldPortNeighborDevDevID DisplayString,
udldPortNeighborDevPortID DisplayString,
udldPortNeighborDevDevName DisplayString,
udldPortNeighborDevNeighborState INTEGER,
udldPortNeighborDevExpire INTEGER,
udldPortNeighborDevMessageInterval INTEGER,
udldPortNeighborDevTimeout INTEGER
}
udldPortNeighborDevPortIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The port (excluding trunk and trunk members)
interface of the portTable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of ifIndex in the IF-MIB."
::= { udldPortNeighborDevEntry 1 }
udldPortNeighborDevIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A 32-bit integer uniquely identifying the nieghbor device
discovered by UDLD on a port interface."
::= { udldPortNeighborDevEntry 2 }
udldPortNeighborDevDevID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The device ID of this neighbor device."
::= { udldPortNeighborDevEntry 3 }
udldPortNeighborDevPortID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The port ID of this neighbor device."
::= { udldPortNeighborDevEntry 4 }
udldPortNeighborDevDevName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The device name of this neighbor device."
::= { udldPortNeighborDevEntry 5 }
udldPortNeighborDevNeighborState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
neighborsEchoIsEmpty(2),
bidirectional(3),
mismatchWithneighborStateReported(4),
unidirectional(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The neighbor state of this neighbor device."
::= { udldPortNeighborDevEntry 6 }
udldPortNeighborDevExpire OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The amount of time remaining (in seconds) before this
entry should expire. Whenever this period expires,
this entry will be removed."
::= { udldPortNeighborDevEntry 7 }
udldPortNeighborDevMessageInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The message interval (in seconds) of this neighbor device."
::= { udldPortNeighborDevEntry 8 }
udldPortNeighborDevTimeout OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The timeout interval (in seconds) of this neighbor device."
::= { udldPortNeighborDevEntry 9 }
--
-- mldSnoopMgt
--
-- Management for MLD
-- Snooping.
mldSnoopStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Parameter to enable or disable MLD snooping on the device.
When enabled, the device will examine MLD packets and set
up filters for MLD ports. "
DEFVAL { disabled }
::= { mldSnoopMgt 1 }
mldSnoopQuerier OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Enables (disables) whether the switch acts as an MLD
querier."
DEFVAL { disabled }
::= { mldSnoopMgt 2 }
mldSnoopRobustness OBJECT-TYPE
SYNTAX Integer32 (2..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. MLD is
robust to (Robustness Variable-1) packet losses. The
discussion of the Robustness Variable is in Section 7.1
of RFC 2710."
DEFVAL { 2 }
::= { mldSnoopMgt 3 }
mldSnoopQueryInterval OBJECT-TYPE
SYNTAX Integer32 (60..125)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The interval (in seconds) between MLD host-query
messages sent by the switch."
DEFVAL { 125 }
::= { mldSnoopMgt 4 }
mldSnoopQueryMaxResponseTime OBJECT-TYPE
SYNTAX Integer32 (5..25)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The time after a query, during which a response is
expected from an endstation. If a querier has sent
a number of queries defined by mldSnoopRobustness,
but an endstation has not responded, a countdown
timer is started using an initial value set by
mldSnoopQueryMaxResponseTime. If the countdown
finishes, and the endstation still has not responded,
then that the endstation is deemed to have
left the multicast group."
DEFVAL { 10 }
::= { mldSnoopMgt 5 }
mldSnoopRouterPortExpireTime OBJECT-TYPE
SYNTAX Integer32 (300..500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the time (in seconds) the switch waits after
the previous querier has stopped querying before
the router port (which received query packets from
previous querier) expires."
DEFVAL { 300 }
::= { mldSnoopMgt 6 }
mldSnoopVersion OBJECT-TYPE
SYNTAX Integer32 (1..2)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "MLD version snooped"
DEFVAL { 1 }
::= { mldSnoopMgt 7 }
mldSnoopUnknownMcastMode OBJECT-TYPE
SYNTAX INTEGER
{
flood(1),
toRouterPort(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Sets the mldSnoopUnknownMcastMode to define the flooding
behavior when receive the unknown multicast traffic."
::= { mldSnoopMgt 8 }
mldSnoopRouterCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopRouterCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for current router ports."
::= { mldSnoopMgt 9 }
mldSnoopRouterCurrentEntry OBJECT-TYPE
SYNTAX MldSnoopRouterCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for current router ports."
INDEX { mldSnoopRouterCurrentVlanIndex }
::= {mldSnoopRouterCurrentTable 1 }
MldSnoopRouterCurrentEntry ::=
SEQUENCE {
mldSnoopRouterCurrentVlanIndex Unsigned32,
mldSnoopRouterCurrentPorts PortList
}
mldSnoopRouterCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
mldSnoopRouterStaticTable."
::= { mldSnoopRouterCurrentEntry 1 }
mldSnoopRouterCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The set of ports which are current router ports,
including static router ports. Please refer to
mldSnoopRouterStaticTable."
::= { mldSnoopRouterCurrentEntry 2 }
mldSnoopRouterStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopRouterStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for static router ports."
::= { mldSnoopMgt 10 }
mldSnoopRouterStaticEntry OBJECT-TYPE
SYNTAX MldSnoopRouterStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for static router ports."
INDEX { mldSnoopRouterStaticVlanIndex }
::= { mldSnoopRouterStaticTable 1 }
MldSnoopRouterStaticEntry ::=
SEQUENCE {
mldSnoopRouterStaticVlanIndex Unsigned32,
mldSnoopRouterStaticPorts PortList,
mldSnoopRouterStaticStatus ValidStatus
}
mldSnoopRouterStaticVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
mldSnoopRouterStaticTable."
::= { mldSnoopRouterStaticEntry 1 }
mldSnoopRouterStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The set of ports which are static router ports."
::= { mldSnoopRouterStaticEntry 2 }
mldSnoopRouterStaticStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { mldSnoopRouterStaticEntry 3 }
mldSnoopMulticastCurrentTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopMulticastCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for current multicast addresses."
::= { mldSnoopMgt 11 }
mldSnoopMulticastCurrentEntry OBJECT-TYPE
SYNTAX MldSnoopMulticastCurrentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for current multicast addresses."
INDEX { mldSnoopMulticastCurrentVlanIndex,
mldSnoopMulticastCurrentIpAddress }
::= { mldSnoopMulticastCurrentTable 1 }
MldSnoopMulticastCurrentEntry ::=
SEQUENCE {
mldSnoopMulticastCurrentVlanIndex Unsigned32,
mldSnoopMulticastCurrentIpAddress InetAddressIPv6,
mldSnoopMulticastCurrentPorts PortList
}
mldSnoopMulticastCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
mldSnoopMulticastStaticTable."
::= { mldSnoopMulticastCurrentEntry 1 }
mldSnoopMulticastCurrentIpAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IPv6 address of multicast group."
::= { mldSnoopMulticastCurrentEntry 2 }
mldSnoopMulticastCurrentPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The set of ports which are members of a multicast group,
including static members. Please refer to
mldSnoopMulticastStaticTable."
::= { mldSnoopMulticastCurrentEntry 3 }
mldSnoopMulticastStaticTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopMulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for static multicast addresses."
::= { mldSnoopMgt 12 }
mldSnoopMulticastStaticEntry OBJECT-TYPE
SYNTAX MldSnoopMulticastStaticEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for static multicast addresses."
INDEX { mldSnoopMulticastStaticVlanIndex,
mldSnoopMulticastStaticIpAddress }
::= { mldSnoopMulticastStaticTable 1 }
MldSnoopMulticastStaticEntry ::=
SEQUENCE {
mldSnoopMulticastStaticVlanIndex Unsigned32,
mldSnoopMulticastStaticIpAddress InetAddressIPv6,
mldSnoopMulticastStaticPorts PortList,
mldSnoopMulticastStaticStatus ValidStatus
}
mldSnoopMulticastStaticVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The interface identified by a particular value of
this index is the same interface as identified by
the same value of dot1qVlanIndex in the Q-BRIDGE-MIB.
The entry will only appear here after a configure to
mldSnoopMulticastStaticTable."
::= { mldSnoopMulticastStaticEntry 1 }
mldSnoopMulticastStaticIpAddress OBJECT-TYPE
SYNTAX InetAddressIPv6
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IPv6 address of multicast group."
::= { mldSnoopMulticastStaticEntry 2 }
mldSnoopMulticastStaticPorts OBJECT-TYPE
SYNTAX PortList
MAX-ACCESS read-create
STATUS current
DESCRIPTION "The set of ports which are members."
::= { mldSnoopMulticastStaticEntry 3 }
mldSnoopMulticastStaticStatus OBJECT-TYPE
SYNTAX ValidStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Setting this to valid(1) creates an entry.
Setting this to invalid(2) destroys an entry."
::= { mldSnoopMulticastStaticEntry 4 }
mldSnoopCurrentVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF MldSnoopCurrentVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table for configuring MLD snooping for each VLAN
which exists in the device by (local or network)
management, or dynamically created as a result of
GVRP requests received."
::= { mldSnoopMgt 13 }
mldSnoopCurrentVlanEntry OBJECT-TYPE
SYNTAX MldSnoopCurrentVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Entry for configuring MLD snooping."
INDEX { mldSnoopCurrentVlanIndex }
::= { mldSnoopCurrentVlanTable 1 }
MldSnoopCurrentVlanEntry ::= SEQUENCE
{
mldSnoopCurrentVlanIndex Unsigned32,
mldSnoopCurrentVlanImmediateLeave EnabledStatus
}
mldSnoopCurrentVlanIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface."
::= { mldSnoopCurrentVlanEntry 1 }
mldSnoopCurrentVlanImmediateLeave OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The parameter to enable or disable the
Immediate-Leave feature on this VLAN."
::= { mldSnoopCurrentVlanEntry 2 }
--
-- dhcpv6SnoopMgt
--
-- Management of DHCPv6 snooping.
dhcpv6SnoopGlobal OBJECT IDENTIFIER ::= { dhcpv6SnoopMgt 1 }
dhcpv6SnoopVlan OBJECT IDENTIFIER ::= { dhcpv6SnoopMgt 2 }
dhcpv6SnoopInterface OBJECT IDENTIFIER ::= { dhcpv6SnoopMgt 3 }
dhcpv6SnoopBinding OBJECT IDENTIFIER ::= { dhcpv6SnoopMgt 4 }
dhcpv6SnoopStatistics OBJECT IDENTIFIER ::= { dhcpv6SnoopMgt 5 }
dhcpv6SnoopEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the DHCPv6 Snooping feature is
enabled."
::= { dhcpv6SnoopGlobal 1 }
dhcpv6SnoopBindingTableClearAction OBJECT-TYPE
SYNTAX INTEGER
{
noClear(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for clearing dhcpv6SnoopBindingTable.
When this object is set to clear(2), all dynamic entries in dhcpv6SnoopBindingTable will be cleared.
When this object is read, the value of this object is
always noClear(1)."
::= { dhcpv6SnoopGlobal 2 }
dhcpv6SnoopStatisticsClearAction OBJECT-TYPE
SYNTAX INTEGER
{
noClear(1),
clear(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action for clearing dhcpSnoopStatistics.
When this object is set to clear(2), statistics in dhcpSnoopStatistics will be cleared.
When this object is read, the value of this object is
always noClear(1)."
::= { dhcpv6SnoopGlobal 3 }
--
dhcpv6SnoopVlanConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dhcpv6SnoopVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains DHCPv6 Snooping configurations of existing VLANs."
::= { dhcpv6SnoopVlan 1 }
dhcpv6SnoopVlanConfigEntry OBJECT-TYPE
SYNTAX Dhcpv6SnoopVlanConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the configuration to enable
or disable DHCPv6 Snooping at each existing VLAN."
INDEX { dhcpv6SnoopVlanIndex }
::= { dhcpv6SnoopVlanConfigTable 1 }
Dhcpv6SnoopVlanConfigEntry ::= SEQUENCE
{
dhcpv6SnoopVlanIndex VlanIndex,
dhcpv6SnoopVlanEnable EnabledStatus
}
dhcpv6SnoopVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the VLAN ID on which DHCPv6 Snooping
feature is configured."
::= { dhcpv6SnoopVlanConfigEntry 1 }
dhcpv6SnoopVlanEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether DHCPv6 Snooping is enabled in
this VLAN."
::= { dhcpv6SnoopVlanConfigEntry 2 }
--
dhcpv6SnoopPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dhcpv6SnoopPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table provides the mechanism to configure the trust
state of each port or trunk for DHCPv6 Snooping purpose."
::= { dhcpv6SnoopInterface 1 }
dhcpv6SnoopPortConfigEntry OBJECT-TYPE
SYNTAX Dhcpv6SnoopPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the configuration to enable or disable
trust state of each port or trunk for DHCPv6 Snooping purpose."
INDEX { dhcpv6SnoopPortIfIndex }
::= { dhcpv6SnoopPortConfigTable 1 }
Dhcpv6SnoopPortConfigEntry ::= SEQUENCE
{
dhcpv6SnoopPortIfIndex InterfaceIndex,
dhcpv6SnoopPortTrustEnable EnabledStatus,
dhcpv6SnoopPortMaxBinding Integer32,
dhcpv6SnoopPortCurrentBinding Integer32
}
dhcpv6SnoopPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The ifIndex value of the port or trunk."
::= { dhcpv6SnoopPortConfigEntry 1 }
dhcpv6SnoopPortTrustEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether the port or trunk is trusted
for DHCP Snooping purpose."
::= { dhcpv6SnoopPortConfigEntry 2 }
dhcpv6SnoopPortMaxBinding OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The maximum number of binding entries of the port or trunk"
::= { dhcpv6SnoopPortConfigEntry 3}
dhcpv6SnoopPortCurrentBinding OBJECT-TYPE
SYNTAX Integer32(0..5)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of dynamic binding entrires learned on the port or trunk."
::= { dhcpv6SnoopPortConfigEntry 4}
--
dhcpv6SnoopBindingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dhcpv6SnoopBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "A table contains the DHCPv6 binding entries information
learned by the device."
::= { dhcpv6SnoopBinding 1 }
dhcpv6SnoopBindingEntry OBJECT-TYPE
SYNTAX Dhcpv6SnoopBindingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An instance contains the link-layer address, ia type,
ia id, IPv6 address, VLAN number, interface number, lifetime."
INDEX {
dhcpv6SnoopBindingLinkLayerAddress,
dhcpv6SnoopBindingIaType,
dhcpv6SnoopBindingIaId,
dhcpv6SnoopBindingIpv6Address
}
::= { dhcpv6SnoopBindingTable 1 }
Dhcpv6SnoopBindingEntry ::= SEQUENCE
{
dhcpv6SnoopBindingLinkLayerAddress MacAddress,
dhcpv6SnoopBindingIaType INTEGER,
dhcpv6SnoopBindingIaId Unsigned32,
dhcpv6SnoopBindingIpv6Address InetAddress,
dhcpv6SnoopBindingVlanIndex VlanIndex,
dhcpv6SnoopBindingPortIfIndex InterfaceIndex,
dhcpv6SnoopBindingLifeTime Unsigned32
}
dhcpv6SnoopBindingLinkLayerAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the link-layer address of a DHCPv6
client host."
::= { dhcpv6SnoopBindingEntry 1 }
dhcpv6SnoopBindingIaType OBJECT-TYPE
SYNTAX INTEGER
{
na(3),
ta(4)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the IPv6 address ia type of a DHCPv6
client host. na - Non-temporary address, ta - temporary address"
::= { dhcpv6SnoopBindingEntry 2 }
dhcpv6SnoopBindingIaId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the IPv6 address ia id of a DHCPv6
client host."
::= { dhcpv6SnoopBindingEntry 3 }
dhcpv6SnoopBindingIpv6Address OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This object indicates the IPv6 address of a DHCPv6
client host."
::= { dhcpv6SnoopBindingEntry 4 }
dhcpv6SnoopBindingVlanIndex OBJECT-TYPE
SYNTAX VlanIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the VLAN which a DHCPv6 client host
belongs to."
::= { dhcpv6SnoopBindingEntry 5 }
dhcpv6SnoopBindingPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the port or trunk where a DHCPv6 client
host connects to."
::= { dhcpv6SnoopBindingEntry 6 }
dhcpv6SnoopBindingLifeTime OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object indicates the life time of this DHCPv6
binding."
::= { dhcpv6SnoopBindingEntry 7 }
--
dhcpSnoopRecvClientPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the received number of client packets"
::= { dhcpv6SnoopStatistics 1 }
dhcpSnoopSentClientPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the sent number of client packets"
::= { dhcpv6SnoopStatistics 2 }
dhcpSnoopDroppedClientPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the dropped number of client packets"
::= { dhcpv6SnoopStatistics 3 }
dhcpSnoopRecvServerPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the received number of server packets"
::= { dhcpv6SnoopStatistics 4 }
dhcpSnoopSentServerPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the sent number of server packets"
::= { dhcpv6SnoopStatistics 5 }
dhcpSnoopDroppedServerPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the dropped number of server packets"
::= { dhcpv6SnoopStatistics 6}
dhcpSnoopRecvRelayPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the received number of relay packets"
::= { dhcpv6SnoopStatistics 7 }
dhcpSnoopSentRelayPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the sent number of relay packets"
::= { dhcpv6SnoopStatistics 8 }
dhcpSnoopDroppedRelayPkts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the dropped number of relay packets"
::= { dhcpv6SnoopStatistics 9}
--
-- mDnsMgt
--
mDnsStatus OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This object indicates whether multicast DNS is enabled
or not."
::= { mDnsMgt 1 }
--
-- trap definitions
--
ecs4210Traps OBJECT IDENTIFIER ::= { ecs4210Notifications 1 }
ecs4210TrapsPrefix OBJECT IDENTIFIER ::= { ecs4210Traps 0 }
swPowerStatusChangeTrap NOTIFICATION-TYPE
OBJECTS { swIndivPowerUnitIndex, swIndivPowerIndex, swIndivPowerStatus }
STATUS current
DESCRIPTION "This trap is sent when the power state changes."
::= { ecs4210TrapsPrefix 1 }
swPortSecurityTrap NOTIFICATION-TYPE
OBJECTS { ifIndex }
STATUS current
DESCRIPTION "This trap is sent when the port is being intruded. This trap
will only be sent when the portSecActionTrap is enabled."
::= { ecs4210TrapsPrefix 36 }
swIpFilterRejectTrap NOTIFICATION-TYPE
OBJECTS { trapIpFilterRejectMode, trapIpFilterRejectIp }
STATUS current
DESCRIPTION "This trap is sent when an incorrect IP address is rejected by
the ipfilter."
::= { ecs4210TrapsPrefix 40 }
swAuthenticationFailure NOTIFICATION-TYPE
OBJECTS { trapVarLoginUserName, trapVarLoginMethod, trapVarLoginIPAddress, trapVarLoginTime }
STATUS current
DESCRIPTION "This trap will be triggered if authentication is failed."
::= { ecs4210TrapsPrefix 66 }
swAuthenticationSuccess NOTIFICATION-TYPE
OBJECTS { trapVarLoginUserName, trapVarLoginMethod, trapVarLoginIPAddress, trapVarLoginTime }
STATUS current
DESCRIPTION "This trap will be triggered if authentication is successful."
::= { ecs4210TrapsPrefix 67 }
--
-- ATC trap
--
swAtcBcastStormAlarmFireTrap NOTIFICATION-TYPE
OBJECTS {
atcBcastStormIfIndex,
atcBcastStormSampleType,
atcBcastStormCurrentTrafficRate,
atcBcastStormAlarmFireThreshold
}
STATUS current
DESCRIPTION
"When the broadcast traffic is detected as the storm, this trap
will be fired."
::= { ecs4210TrapsPrefix 70 }
swAtcBcastStormAlarmClearTrap NOTIFICATION-TYPE
OBJECTS {
atcBcastStormIfIndex,
atcBcastStormSampleType,
atcBcastStormCurrentTrafficRate,
atcBcastStormAlarmClearThreshold
}
STATUS current
DESCRIPTION
"When the broadcast storm is detected as the normal traffic, this
trap will be fired."
::= { ecs4210TrapsPrefix 71 }
swAtcBcastStormTcApplyTrap NOTIFICATION-TYPE
OBJECTS {
atcBcastStormIfIndex,
atcBcastStormSampleType,
atcBcastStormCurrentTrafficRate,
atcBcastStormAlarmFireThreshold,
atcBcastStormTcApplyTime
}
STATUS current
DESCRIPTION
"When the ATC is activated, this trap will be fired."
::= { ecs4210TrapsPrefix 72 }
swAtcBcastStormTcReleaseTrap NOTIFICATION-TYPE
OBJECTS {
atcBcastStormIfIndex,
atcBcastStormSampleType,
atcBcastStormCurrentTrafficRate,
atcBcastStormAlarmClearThreshold,
atcBcastStormTcReleaseTime
}
STATUS current
DESCRIPTION
"When the ATC is released, this trap will be fired."
::= { ecs4210TrapsPrefix 73 }
swAtcMcastStormAlarmFireTrap NOTIFICATION-TYPE
OBJECTS {
atcMcastStormIfIndex,
atcMcastStormSampleType,
atcMcastStormCurrentTrafficRate,
atcMcastStormAlarmFireThreshold
}
STATUS current
DESCRIPTION
"When the multicast traffic is detected as the storm, this trap
will be fired."
::= { ecs4210TrapsPrefix 74 }
swAtcMcastStormAlarmClearTrap NOTIFICATION-TYPE
OBJECTS {
atcMcastStormIfIndex,
atcMcastStormSampleType,
atcMcastStormCurrentTrafficRate,
atcMcastStormAlarmClearThreshold
}
STATUS current
DESCRIPTION
"When the multicast storm is detected as the normal traffic, this
trap will be fired."
::= { ecs4210TrapsPrefix 75 }
swAtcMcastStormTcApplyTrap NOTIFICATION-TYPE
OBJECTS {
atcMcastStormIfIndex,
atcMcastStormSampleType,
atcMcastStormCurrentTrafficRate,
atcMcastStormAlarmFireThreshold,
atcMcastStormTcApplyTime
}
STATUS current
DESCRIPTION
"When the ATC is activated, this trap will be fired."
::= { ecs4210TrapsPrefix 76 }
swAtcMcastStormTcReleaseTrap NOTIFICATION-TYPE
OBJECTS {
atcMcastStormIfIndex,
atcMcastStormSampleType,
atcMcastStormCurrentTrafficRate,
atcMcastStormAlarmClearThreshold,
atcMcastStormTcReleaseTime
}
STATUS current
DESCRIPTION
"When the ATC is released, this trap will be fired."
::= { ecs4210TrapsPrefix 77 }
swLoopbackDetectionTrap NOTIFICATION-TYPE
OBJECTS { staLoopbackDetectionPortIfIndex }
STATUS current
DESCRIPTION "This trap will be sent when loopback BPDUs have been detected."
::= { ecs4210TrapsPrefix 95}
networkAccessPortLinkDetectionTrap NOTIFICATION-TYPE
OBJECTS {
ifIndex,
ifOperStatus,
networkAccessPortLinkDetectionMode,
networkAccessPortLinkDetectionAciton
}
STATUS current
DESCRIPTION "This trap is sent when a networkAccessPortLinkDetection
event is triggered."
::= { ecs4210TrapsPrefix 96 }
dot1agCfmMepUpTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepDbRMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when a new remote MEP is discovered."
::= { ecs4210TrapsPrefix 97 }
dot1agCfmMepDownTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepDbRMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when port status or interface status TLV
received from remote MEP indicates it is not up."
::= { ecs4210TrapsPrefix 98 }
dot1agCfmConfigFailTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when a MEP receives a CCM with MPID
which already exists on the same MA in this switch."
::= { ecs4210TrapsPrefix 99 }
dot1agCfmLoopFindTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when a MEP receives its own CCMs."
::= { ecs4210TrapsPrefix 100 }
dot1agCfmMepUnknownTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when a CCM is received from
an unexpected MEP."
::= { ecs4210TrapsPrefix 101 }
dot1agCfmMepMissingTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMepDbRMepIdentifier
}
STATUS current
DESCRIPTION "This trap is sent when the cross-check enable timer expires
and no CCMs were received from an expected (configured) MEP."
::= { ecs4210TrapsPrefix 102 }
dot1agCfmMaUpTrap NOTIFICATION-TYPE
OBJECTS {
dot1agCfmMaIndex
}
STATUS current
DESCRIPTION "This trap is sent when all expected remote MEPs are up."
::= { ecs4210TrapsPrefix 103 }
autoUpgradeTrap NOTIFICATION-TYPE
OBJECTS {
fileCopyFileType,
trapAutoUpgradeResult,
trapAutoUpgradeNewVer
}
STATUS current
DESCRIPTION "This trap is sent when auto upgrade is executed."
::= { ecs4210TrapsPrefix 104 }
swCpuUtiRisingNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the CPU utilization has risen
from cpuUtiFallingThreshold to cpuUtiRisingThreshold."
::= { ecs4210TrapsPrefix 107 }
swCpuUtiFallingNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the CPU utilization has fallen
from cpuUtiRisingThreshold to cpuUtiFallingThreshold."
::= { ecs4210TrapsPrefix 108 }
swMemoryUtiRisingThresholdNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the memory utilization has risen
from memoryUtiFallingThreshold to memoryUtiRisingThreshold."
::= { ecs4210TrapsPrefix 109 }
swMemoryUtiFallingThresholdNotification NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"This notification indicates that the memory utilization has fallen
from memoryUtiRisingThreshold to memoryUtiFallingThreshold."
::= { ecs4210TrapsPrefix 110 }
swIpFilterInetRejectTrap NOTIFICATION-TYPE
OBJECTS {
trapIpFilterRejectMode,
trapIpFilterRejectInetAddressType,
trapIpFilterRejectInetAddress
}
STATUS current
DESCRIPTION
"This trap is sent when an incorrect IP address is rejected
by the IP filter."
::= { ecs4210TrapsPrefix 111 }
dhcpRogueServerAttackTrap NOTIFICATION-TYPE
OBJECTS
{
trapDhcpClientPortIfIndex,
trapDhcpServerIpAddress
}
STATUS current
DESCRIPTION "This trap is sent when receiving a DHCP packet from a
rogue server."
::= { ecs4210TrapsPrefix 114 }
swLoginFailureTrap NOTIFICATION-TYPE
OBJECTS { trapLoginMode, trapLoginUsername, trapLoginIp }
STATUS current
DESCRIPTION "This trap is sent when login fail via console,telnet, or web."
::= { ecs4210TrapsPrefix 139 }
swLoginSucceedTrap NOTIFICATION-TYPE
OBJECTS { trapLoginMode, trapLoginUsername, trapLoginIp }
STATUS current
DESCRIPTION "This trap is sent when login succeed via console,telnet, or web."
::= { ecs4210TrapsPrefix 140 }
lbdDetectionTrap NOTIFICATION-TYPE
OBJECTS {
trapIfIndex,
trapVlanId
}
STATUS current
DESCRIPTION "This trap is sent when a loopback condition is detected
by LBD."
::= { ecs4210TrapsPrefix 141 }
lbdRecoveryTrap NOTIFICATION-TYPE
OBJECTS {
trapIfIndex
}
STATUS current
DESCRIPTION "This trap is sent when a recovery is done by LBD."
::= { ecs4210TrapsPrefix 142 }
--
-- UDLD trap
--
udldPortShutdownTrap NOTIFICATION-TYPE
OBJECTS {
udldPortIndex,
trapUdldPortShutdownReason
}
STATUS current
DESCRIPTION "This trap is sent when the port is shut down by UDLD."
::= { ecs4210TrapsPrefix 192 }
--
-- AMTR HW Security trap
--
swAmtrHwSecurityIntrusionMacTrap NOTIFICATION-TYPE
OBJECTS {
ifIndex,
trapVarMacAddr
}
STATUS current
DESCRIPTION "This trap is sent when learned MAC addresses exceed
hardware security MAC max count."
::= { ecs4210TrapsPrefix 193 }
swAmtrHwSecurityMacPortMovedTrap NOTIFICATION-TYPE
OBJECTS {
ifIndex,
trapAmtrHwSecurityMacAddressType,
trapVarMacAddr
}
STATUS current
DESCRIPTION "This trap is sent when a hardware security static/dynamic MAC
address has been moved to another port."
::= { ecs4210TrapsPrefix 194 }
END
Reference in New Issue Copy Permalink