david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/enterasys/CT-CMMPHYS-MIB

1177 lines
42 KiB
Plaintext
Raw Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
CT-CMMPHYS-MIB DEFINITIONS ::= BEGIN
-- ct-cmmphys-mib.txt
-- Revision: 01.00.00
-- Part Number:
-- Date: December 16, 1998
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides an enterprise-specific CMM container MIB.
--
-- This module will be extended, as needed.
--
-- Goals and Philosophy
--
-- The purpose of this MIB is to provide a central repository of all
-- information pertaining to the configuration, operation, status,
-- and health of a CMM board and its CMM modules. The goal of these
-- values is to facilitate troubleshooting problems at the level of
-- a CMM board or CMM module. The intended audience for this
-- information includes customers, field engineers, and developers.
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright December 98 Cabletron Systems
IMPORTS
OBJECT-TYPE
FROM RFC-1212
DisplayString,ifIndex
FROM RFC1213-MIB
IpAddress,Counter,Gauge
FROM RFC1155-SMI
ctCMM
FROM CTRON-MIB-NAMES
mBusBoardID
FROM CT-HSIMPHYS-MIB;
--=============== Group Definitions ===================
-- This is just a dummy value to get this to compile correctly for now.
cmmModemInfo OBJECT IDENTIFIER ::= { ctCMM 1 }
--================================================================
-- This MIB module uses the extended OBJECT-TYPE macro as defined
-- RFC 1212
--================= CMM Board-Level Info ===================
cmmBoardTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmBoardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of CMM boards present in this unit."
::= { cmmModemInfo 1 }
cmmBoardEntry OBJECT-TYPE
SYNTAX CmmBoardEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A CMM board present in this unit."
INDEX { mBusBoardID }
::= { cmmBoardTable 1 }
CmmBoardEntry ::=
SEQUENCE {
cmmBoardType OBJECT IDENTIFIER,
cmmNumModules INTEGER,
cmmModuleNumModems INTEGER,
cmmTFTPServer IpAddress,
cmmUpgradePath DisplayString,
cmmUpgradeFlag INTEGER,
cmmCommitFlag INTEGER,
cmmModemResetLimit INTEGER,
cmmModemResetTime INTEGER,
cmmOutgoingInactivityTimeout INTEGER,
cmmIncomingInactivityTimeout INTEGER,
cmmAsyncBaseOrigATCmdStr DisplayString,
cmmAsyncBaseAnswerATCmdStr DisplayString,
cmmAsyncOrigStrModifier DisplayString,
cmmAsyncAnswerStrModifier DisplayString,
cmmAsyncOperOrigATCmdStr DisplayString,
cmmAsyncOperAnswerATCmdStr DisplayString,
cmmHdlcBaseOrigATCmdStr DisplayString,
cmmHdlcBaseAnswerATCmdStr DisplayString,
cmmHdlcOrigStrModifier DisplayString,
cmmHdlcAnswerStrModifier DisplayString,
cmmHdlcOperOrigATCmdStr DisplayString,
cmmHdlcOperAnswerATCmdStr DisplayString,
cmmBoardAdminStatus INTEGER,
cmmBoardOperStatus INTEGER
}
cmmBoardType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object uniquely defines the CMM
board type - a vendor's authoritative identification
for a module. By convention, this value is allocated
within the SMI enterprises subtree(1.3.6.1.4.1), and
provides an easy and unambiguous means for determining
the type of board."
::= { cmmBoardEntry 1 }
cmmNumModules OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is the number of CMM modules
contained on this physical CMM circuit board."
::= { cmmBoardEntry 2 }
cmmModuleNumModems OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of modems per CMM module."
::= { cmmBoardEntry 3 }
cmmTFTPServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is the IP address of the TFTP
server where the object code for CMM modules resides.
This object is persistent."
::= { cmmBoardEntry 4 }
cmmUpgradePath OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is the path to the object code
for CMM modules on the TFTP server. This object is
persistent."
::= { cmmBoardEntry 5 }
cmmUpgradeFlag OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is a flag that indicates whether
or not to upgrade the software for the CMM modules on the
board. This object is persistent."
::= { cmmBoardEntry 6 }
cmmCommitFlag OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is a flag that indicates whether
or not to commit the software for the CMM modules on the
board. This object is persistent."
::= { cmmBoardEntry 7 }
cmmModemResetLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is the number of times that a
modem can be reset within a given time span before it is
declared to be faulty. If the value is 0 then the modem
will never be declared faulty. This object is persistent."
::= { cmmBoardEntry 8 }
cmmModemResetTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is the time span (in minutes)
during which the given number of resets must occur before
the modem is declared to be faulty. This object is
persistent."
::= { cmmBoardEntry 9 }
cmmOutgoingInactivityTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is the duration (in seconds) of a
period of inactivity before an outgoing call is terminated.
This object is persistent."
::= { cmmBoardEntry 10 }
cmmIncomingInactivityTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is the duration (in seconds) of a
period of inactivity before an incoming call is terminated.
This object is persistent."
::= { cmmBoardEntry 11 }
cmmAsyncBaseOrigATCmdStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is the default or base set of AT
commands to be used when originating an async call."
::= { cmmBoardEntry 12 }
cmmAsyncBaseAnswerATCmdStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is the default or base set of AT
commands to be used when answering an async call."
::= { cmmBoardEntry 13 }
cmmAsyncOrigStrModifier OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is a set of additional AT commands
to be used when originating an async call. This object is
persistent."
::= { cmmBoardEntry 14 }
cmmAsyncAnswerStrModifier OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is a set of additional AT commands
to be used when answering an async call. This object is
persistent."
::= { cmmBoardEntry 15 }
cmmAsyncOperOrigATCmdStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is the operative set of AT commands
to be used when originating an async call. It includes the
base string, the modifier string, and the call timeout value."
::= { cmmBoardEntry 16 }
cmmAsyncOperAnswerATCmdStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is the operative set of AT commands
to be used when answering an async call. It includes the
base string, the modifier string, and the call timeout value."
::= { cmmBoardEntry 17 }
cmmHdlcBaseOrigATCmdStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is the default or base set of AT
commands to be used when originating an HDLC call."
::= { cmmBoardEntry 18 }
cmmHdlcBaseAnswerATCmdStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is the default or base set of AT
commands to be used when answering an HDLC call."
::= { cmmBoardEntry 19 }
cmmHdlcOrigStrModifier OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is a set of additional AT commands
to be used when originating an HDLC call. This object is
persistent."
::= { cmmBoardEntry 20 }
cmmHdlcAnswerStrModifier OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is a set of additional AT commands
to be used when answering an HDLC call. This object is
persistent."
::= { cmmBoardEntry 21 }
cmmHdlcOperOrigATCmdStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is the operative set of AT commands
to be used when originating an HDLC call. It includes the
base string, the modifier string, and the call timeout value."
::= { cmmBoardEntry 22 }
cmmHdlcOperAnswerATCmdStr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is the operative set of AT commands
to be used when answering an HDLC call. It includes the
base string, the modifier string, and the call timeout value."
::= { cmmBoardEntry 23 }
cmmBoardAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
down(1),
leave-service(2),
up(3),
upgrade(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is the administrative status
of the CMM board.
down(1) -- all modems that belong to this board are to be
removed from service immediately
leave-service(2) -- each modem that belongs to this board is
to be removed from service at the completion
of its current call, if any
up(3) -- each modem that belongs to this module is to become
available for accepting calls
upgrade(4) -- all modules that belong to this board are to be
reloaded with new software and restarted"
::= { cmmBoardEntry 24 }
cmmBoardOperStatus OBJECT-TYPE
SYNTAX INTEGER {
initializing(1),
active(2),
leaving-service(3),
out-of-service(4),
faulty(5),
impaired(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is the operational status of
the CMM board.
initializing(1) -- all modules that belong to this board are booting
up or in the process of a software upgrade
active(2) -- all modules that belong to this board are available
for accepting calls
leaving-service(3) -- all modules that belong to this board are
functional but are no longer available for
accepting calls (Existing calls are allowed
to terminate normally.)
out-of-service(4) -- none of the modules that belong to this board
are available for accepting calls nor do they
have any existing calls
faulty(5) -- all modules that belong to this board are unusable
impaired(6) -- the board is otherwise active but one or more
modules are in the out-of-service, initializing,
testing, faulty, or impaired states"
::= { cmmBoardEntry 25 }
--================= CMM Module-Level Info ===================
cmmModuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmModuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of CMM modules present on each CMM board in this unit"
::= { cmmModemInfo 2 }
cmmModuleEntry OBJECT-TYPE
SYNTAX CmmModuleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The value of this object is a CMM module that is
present in this unit"
INDEX { mBusBoardID, cmmModuleID }
::= { cmmModuleTable 1 }
CmmModuleEntry ::=
SEQUENCE {
cmmModuleID INTEGER,
cmmDpramSize INTEGER,
cmmSdramSize INTEGER,
cmmCpuType INTEGER,
cmmCpuSpeed INTEGER,
cmmCpuFwRev DisplayString,
cmmEpldId DisplayString,
cmmEpldRev DisplayString,
cmmNumBadModems INTEGER,
cmmModuleOperStatus INTEGER,
cmmModuleAdminStatus INTEGER
}
cmmModuleID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is an index that uniquely identifies
the CMM module within the physical CMM board."
::= { cmmModuleEntry 1 }
cmmDpramSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Size of the DPRAM (in bytes) on the CMM module."
::= { cmmModuleEntry 2 }
cmmSdramSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Size of the SDRAM (in bytes) on the CMM module."
::= { cmmModuleEntry 3 }
cmmCpuType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
hitachish3(2),
hitachish4(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CPU type on the CMM module."
::= { cmmModuleEntry 4 }
cmmCpuSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The speed of the CPU (in Megahertz) on the CMM module."
::= { cmmModuleEntry 5 }
cmmCpuFwRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Revision of the CPU firmware on the CMM module. This code
is a product of RSA."
::= { cmmModuleEntry 6 }
cmmEpldId OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"EPLD ID on the CMM module. (Read from the Altera chip.)"
::= { cmmModuleEntry 7 }
cmmEpldRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Revision of the EPLD firmware on the CMM module. This
code is produced by Cabletron."
::= { cmmModuleEntry 8 }
cmmNumBadModems OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is the number of bad modems
on the CMM module."
::= { cmmModuleEntry 9 }
cmmModuleAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
down(1),
leave-service(2),
up(3),
run-diagnostics(4),
reset(5),
faulty(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object is the administrative status
of the CMM module.
down(1) -- all modems that belong to this module are to be
removed from service immediately
leave-service(2) -- each modem that belongs to this module is
to be removed from service at the completion
of its current call, if any
up(3) -- each modem that belongs to this module is to become
available for accepting calls
run-diagnostics(4) -- all modems that belong to this module are
to run a series of comprehensive on-line
diagnostic tests
reset(5) -- the entire module is to be physically reset
faulty(6) -- the entire module is to be immediately removed from
service and considered unusable"
::= { cmmModuleEntry 10 }
cmmModuleOperStatus OBJECT-TYPE
SYNTAX INTEGER {
initializing(1),
active(2),
leaving-service(3),
out-of-service(4),
faulty(5),
impaired(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object is the operational status of
the CMM module.
initializing(1) -- the module is booting up or in the process of
a software upgrade
active(2) -- all modems that belong to this module are available
for accepting calls
leaving-service(3) -- all modems that belong to this module are
functional but are no longer available for
accepting calls (Existing calls are allowed
to terminate normally.)
out-of-service(4) -- none of the modems that belong to this module
are available for accepting calls nor do they
have any existing calls
faulty(5) -- the module has been removed from service by an NMS and
is considered to be unusable
impaired(6) -- the module is otherwise active but one or more
modems are in the out-of-service, initializing,
testing, or faulty states"
::= { cmmModuleEntry 11 }
--================= CMM Modem-Level Info ===================
cmmModemTable OBJECT-TYPE
SYNTAX SEQUENCE OF CmmModemEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of modems present on each CMM module on each CMM board
in this unit"
::= { cmmModemInfo 3 }
cmmModemEntry OBJECT-TYPE
SYNTAX CmmModemEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This object contains data for a single CMM modem."
INDEX { ifIndex }
::= { cmmModemTable 1 }
CmmModemEntry ::=
SEQUENCE {
cmmBoardID INTEGER,
cmmModemID INTEGER,
cmmIFNum INTEGER,
cmmSessionNum INTEGER,
cmmDdpPartNum DisplayString,
cmmDdpRevLevel DisplayString,
cmmDdpFwRev DisplayString,
cmmDDPInterrupts Counter,
cmmRxFlowCtlEvts Counter,
cmmTxFlowCtlEvts Counter,
cmmCallStatus INTEGER,
cmmCallOrigin INTEGER,
cmmRobbedBitDetected DisplayString,
cmmCorrectionType INTEGER,
cmmCompressionType INTEGER,
cmmRxRate INTEGER,
cmmTxRate INTEGER,
cmmEncoding INTEGER,
cmmFraming INTEGER,
cmmInitialConnectRate INTEGER,
cmmMaxHostWindows INTEGER,
cmmMaxCmmWindows INTEGER,
cmmNumOutHostAcks Gauge,
cmmNumOutCmmAcks Gauge,
cmmToNetworkOctets Counter,
cmmFromNetworkOctets Counter,
cmmToHostOctets Counter,
cmmFromHostOctets Counter,
cmmToNetworkFrames Counter,
cmmFromNetworkFrames Counter,
cmmOversizeFrames Counter,
cmmOverrunErrors Counter,
cmmCRCErrors Counter,
cmmAbortedFrames Counter,
cmmRetrainEvents Counter,
cmmARAEvents Counter,
cmmARAFlag INTEGER,
cmmCarrierLossEvents Counter,
cmmCarrierLossFlag INTEGER,
cmmRcvSignalLevel INTEGER,
cmmRcvSignalEQM INTEGER,
cmmTDMSlot INTEGER,
cmmResetModemStats INTEGER,
cmmModemAdminStatus INTEGER,
cmmModemOperStatus INTEGER
}
cmmBoardID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the logical number of the CMM board to which
the modem belongs."
::= { cmmModemEntry 1 }
cmmModemID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the logical number of the modem on the CMM
module to which the modem belongs."
::= { cmmModemEntry 2 }
cmmIFNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of the instance of the Interface
MIB that is associated with this modem."
::= { cmmModemEntry 3 }
cmmSessionNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the session number that is associated with
this modem. Session numbers are assigned, starting with 1, from
the first modem on the first module of the first CMM board and
continuing through the last modem of the last module of the last
CMM board."
::= { cmmModemEntry 4 }
cmmDdpPartNum OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Part number of the DDP controller on the CMM module.
(Read from the DDP chip.)"
::= { cmmModemEntry 5 }
cmmDdpRevLevel OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Revision level of the DDP controller on the CMM module.
(Read from the DDP chip.)"
::= { cmmModemEntry 6 }
cmmDdpFwRev OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Revison of the DDP controller firmware on the CMM module.
This code is produced by Rockwell."
::= { cmmModemEntry 7 }
cmmDDPInterrupts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of interrupts received by the CMM
transfer manager since initialization."
::= { cmmModemEntry 8 }
cmmRxFlowCtlEvts OBJECT-TYPE
SYNTAX Counter
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object contains the number of received flow control events."
::= { cmmModemEntry 9 }
cmmTxFlowCtlEvts OBJECT-TYPE
SYNTAX Counter
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object contains the number of transmitted flow control events."
::= { cmmModemEntry 10 }
cmmCallStatus OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
connected(2),
retraining(3),
dropping(4),
local-test(5),
remote-test(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object contains the current call status."
::= { cmmModemEntry 11 }
cmmCallOrigin OBJECT-TYPE
SYNTAX INTEGER {
answer(1),
originate(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains an enumerated value that indicates whether
the call originated locally or remotely."
::= { cmmModemEntry 12 }
cmmRobbedBitDetected OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the robbed bit signalling pattern that was
detected by the modem or 0 if none."
::= { cmmModemEntry 13 }
cmmCorrectionType OBJECT-TYPE
SYNTAX INTEGER {
no-ec(1),
detection(2),
mnp(3),
hanging-up(4),
speed-matching(5),
lapm(6),
mnp10(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains an enumerated value that indicates the type
of error correction that was negotiated."
::= { cmmModemEntry 14 }
cmmCompressionType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
mnp-class-5(2),
v42bis-tx-only(3),
v42bis-rx-only(4),
v42bis(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains an enumerated value that indicates the type
of data compression that was negotiated."
::= { cmmModemEntry 15 }
cmmRxRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the current receive rate."
::= { cmmModemEntry 16 }
cmmTxRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the current transmit rate."
::= { cmmModemEntry 17 }
cmmEncoding OBJECT-TYPE
SYNTAX INTEGER {
u-law(1),
a-law(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the current PCM encoding type."
::= { cmmModemEntry 18 }
cmmFraming OBJECT-TYPE
SYNTAX INTEGER {
pseudo-framing(1),
hdlc-framing(2),
ppp-async(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the current framing type."
::= { cmmModemEntry 19 }
cmmInitialConnectRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the initial connect rate (in BPS) or the session."
::= { cmmModemEntry 20 }
cmmMaxHostWindows OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the maximum number of host windows."
::= { cmmModemEntry 21 }
cmmMaxCmmWindows OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the maximum number of CMM windows."
::= { cmmModemEntry 22 }
cmmNumOutHostAcks OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of host window acks that
have not been processed by the CMM side."
::= { cmmModemEntry 23 }
cmmNumOutCmmAcks OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of CMM window acks that
have not been processed by the host side."
::= { cmmModemEntry 24 }
cmmToNetworkOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of data bytes transmitted
(modem -> central office switch)."
::= { cmmModemEntry 25 }
cmmFromNetworkOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of data bytes received
(central office switch -> modem)."
::= { cmmModemEntry 26 }
cmmToHostOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of data bytes transmitted
(modem -> m-bus host)."
::= { cmmModemEntry 27 }
cmmFromHostOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of data bytes received
(m-bus host -> modem)."
::= { cmmModemEntry 28 }
cmmToNetworkFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of frames transmitted
(modem -> central office switch)."
::= { cmmModemEntry 29 }
cmmFromNetworkFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of frames received
(central office switch -> modem)."
::= { cmmModemEntry 30 }
cmmOversizeFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of HDLC frames received that were
greater than the maximum permissible size."
::= { cmmModemEntry 31 }
cmmOverrunErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of HDLC overrun errors."
::= { cmmModemEntry 32 }
cmmCRCErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of HDLC CRC errors."
::= { cmmModemEntry 33 }
cmmAbortedFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of HDLC frames that were aborted
while they were being received."
::= { cmmModemEntry 34 }
cmmRetrainEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of times that retrain and
renegotiation events have occurred since initialization."
::= { cmmModemEntry 35 }
cmmARAEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of times that automatic
rate adaption events have occurred."
::= { cmmModemEntry 36 }
cmmARAFlag OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains a flag that indicates whether or not
an ARA event has occurred during the current session."
::= { cmmModemEntry 37 }
cmmCarrierLossEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of times that carrier loss
events have occurred."
::= { cmmModemEntry 38 }
cmmCarrierLossFlag OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains a flag that indicates whether or not a
carrier loss event has occurred during the current session."
::= { cmmModemEntry 39 }
cmmRcvSignalLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the receive signal level."
::= { cmmModemEntry 40 }
cmmRcvSignalEQM OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the receive signal EQM."
::= { cmmModemEntry 41 }
cmmTDMSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the number of the TDM slot used by this
session."
::= { cmmModemEntry 42 }
cmmResetModemStats OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to reset the statistics pertaining to
the selected modem. If written with the value 'true', the
statistics will be reset. If written with the value 'false',
no action will be taken. Its value will always be read as
'false'."
::= { cmmModemEntry 43 }
cmmModemAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
down(1),
leave-service(2),
up(3),
run-diagnostics(4),
reset(5),
faulty(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object contains the administrative status of a modem.
down(1) -- the modem is to be removed from service immediately
leave-service(2) -- the modem is to be removed from service at
the completion of its current call, if any
up(3) -- the modem is to become available for accepting calls
run-diagnostics(4) -- the modem is to run a series of
comprehensive on-line diagnostic tests
reset(5) -- the modem is to be physically reset
faulty(6) -- the modem is to be immediately removed from
service and considered unusable"
::= { cmmModemEntry 44 }
cmmModemOperStatus OBJECT-TYPE
SYNTAX INTEGER {
initializing(1),
idle(2),
active(3),
leaving-service(4),
out-of-service(5),
testing(6),
faulty(7),
resetting(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the operational status of a modem.
initializing(1) -- the module to which the modem belongs is booting
up or in the process of a software upgrade
idle(2) -- the modem is available for accepting calls but has no
call in place
active(3) -- the modem is not available for accepting calls because
it already has one in place
leaving-service(4) -- the modem is functional but is no longer
available for accepting calls (Existing calls
are allowed to terminate normally.)
out-of-service(5) -- the modem is neither available for accepting
calls nor does it have a call in place
testing(6) -- the modem is running a series of comprehensive on-line
diagnostic tests
faulty(7) -- the modem has been removed from service by an NMS or
due to a hardware or software failure and is considered
to be unusable
resetting(8) -- the modem is executing a reset sequence"
::= { cmmModemEntry 45 }
--================= Free-Form AT Command Group ===================
cmmFreeFormAtCmdGroup OBJECT IDENTIFIER ::= { cmmModemInfo 5 }
cmmATCommand OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object contains the user-defined AT command string. It
can contain up to 256 characters, including a carriage return
that will automatically be inserted and a NULL terminator."
::= { cmmFreeFormAtCmdGroup 1 }
cmmSelectedModem OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object contains the ID of the modem to which the free-form
AT command string should be sent."
::= { cmmFreeFormAtCmdGroup 2 }
cmmATCmdStatus OBJECT-TYPE
SYNTAX INTEGER {
sending(1),
not-sending(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object allows the free-form AT command string to be sent
and allows the status of the command string to be examined."
::= { cmmFreeFormAtCmdGroup 3 }
cmmATCmdResult OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object contains the result string from issuing the
free-form AT command ."
::= { cmmFreeFormAtCmdGroup 4 }
END
Reference in New Issue Copy Permalink