mibs/MIBS/enterasys/CTRON-APPN-MIB

3214 lines
132 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
CTRON-APPN-MIB DEFINITIONS ::= BEGIN
-- ctron-appn-mib.txt
-- Revision: 1.00.03
-- Part Number: 2171066
-- Date: June 20, 1996
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for Cabletron's
-- enterprise specific APPN Routing Services MIB.
--
--
-- This module will be extended as required.
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright August 95 Cabletron Systems
IMPORTS
OBJECT-TYPE
FROM RFC-1212
nwRtrProtoSuites
FROM ROUTER-OIDS
DisplayString
FROM RFC1213-MIB
Counter, TimeTicks
FROM RFC1155-SMI;
-- The APPN Router Group.
nwAppnRouter OBJECT IDENTIFIER ::= { nwRtrProtoSuites 5 }
nwAppnMibs OBJECT IDENTIFIER ::= { nwAppnRouter 1 }
nwAppnComponents OBJECT IDENTIFIER ::= { nwAppnRouter 2 }
-- APPN Router Component Groups
nwAppnSystem OBJECT IDENTIFIER ::= { nwAppnComponents 1 }
nwAppnForwarding OBJECT IDENTIFIER ::= { nwAppnComponents 2 }
nwAppnTopology OBJECT IDENTIFIER ::= { nwAppnComponents 4 }
nwAppnFib OBJECT IDENTIFIER ::= { nwAppnComponents 5 }
nwAppnEndSystems OBJECT IDENTIFIER ::= { nwAppnComponents 6 }
nwAppnAccessControl OBJECT IDENTIFIER ::= { nwAppnComponents 7 }
nwAppnFilters OBJECT IDENTIFIER ::= { nwAppnComponents 8 }
nwAppnRedirector OBJECT IDENTIFIER ::= { nwAppnComponents 9 }
nwAppnEvent OBJECT IDENTIFIER ::= { nwAppnComponents 10 }
nwAppnWorkGroup OBJECT IDENTIFIER ::= { nwAppnComponents 11 }
-- APPN Router System Groups
nwAppnSysConfig OBJECT IDENTIFIER ::= { nwAppnSystem 1 }
nwAppnSysAdministration OBJECT IDENTIFIER ::= { nwAppnSystem 2 }
-- APPN Router System Configuration Groups
nwAppnSysCfgLocalNode OBJECT IDENTIFIER ::= { nwAppnSysConfig 2 }
nwAppnSysCfgTables OBJECT IDENTIFIER ::= { nwAppnSysConfig 3 }
-- APPN Router Forwarding Groups
nwAppnFwdSystem OBJECT IDENTIFIER ::= { nwAppnForwarding 1 }
nwAppnFwdInterfaces OBJECT IDENTIFIER ::= { nwAppnForwarding 2 }
nwAppnFwdLinks OBJECT IDENTIFIER ::= { nwAppnForwarding 3 }
nwAppnFwdCounters OBJECT IDENTIFIER ::= { nwAppnFwdSystem 1 }
nwAppnFwdIfConfig OBJECT IDENTIFIER ::= { nwAppnFwdInterfaces 1 }
nwAppnIfCn OBJECT IDENTIFIER ::= { nwAppnFwdIfConfig 3 }
nwAppnFwdIfCounters OBJECT IDENTIFIER ::= { nwAppnFwdInterfaces 2 }
nwAppnFwdLsConfig OBJECT IDENTIFIER ::= { nwAppnFwdLinks 1 }
nwAppnFwdLsCounters OBJECT IDENTIFIER ::= { nwAppnFwdLinks 2 }
-- APPN Router Routing Groups
nwAppnDistanceVector OBJECT IDENTIFIER ::= { nwAppnTopology 1 }
nwAppnLinkState OBJECT IDENTIFIER ::= { nwAppnTopology 2 }
nwAppnIsr OBJECT IDENTIFIER ::= { nwAppnLinkState 1 }
nwAppnIsrSystem OBJECT IDENTIFIER ::= { nwAppnIsr 1 }
nwAppnIsrInterfaces OBJECT IDENTIFIER ::= { nwAppnIsr 2 }
nwAppnIsrDatabase OBJECT IDENTIFIER ::= { nwAppnIsr 3 }
nwAppnIsrFilters OBJECT IDENTIFIER ::= { nwAppnIsr 4 }
nwAppnIsrConfig OBJECT IDENTIFIER ::= { nwAppnIsrSystem 1 }
nwAppnIsrCounters OBJECT IDENTIFIER ::= { nwAppnIsrSystem 2 }
nwAppnIsrIfConfig OBJECT IDENTIFIER ::= { nwAppnIsrInterfaces 1 }
nwAppnIsrIfCounters OBJECT IDENTIFIER ::= { nwAppnIsrInterfaces 2 }
-- APPN Router Host End Systems Groups ( NOT USED )
nwAppnHostsSystem OBJECT IDENTIFIER ::= { nwAppnEndSystems 1 }
nwAppnHostsInterfaces OBJECT IDENTIFIER ::= { nwAppnEndSystems 2 }
-- APPN Router Event Log Group
nwAppnEventLogConfig OBJECT IDENTIFIER ::= { nwAppnEvent 1 }
nwAppnEventLogFilterTable OBJECT IDENTIFIER ::= { nwAppnEvent 2 }
nwAppnEventLogTable OBJECT IDENTIFIER ::= { nwAppnEvent 3 }
-- APPN MIB Group
-- This group contains information about the revision level of this
-- MIB within the device. It allows verification of the released
-- version without having to read other objects.
nwAppnMibRevText OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the Cabletron APPN
Router MIB in textual format."
::= { nwAppnMibs 1 }
-- APPN Routing Services System Group
-- This group contains the objects related to APPN Routing Services at a
-- global system-wide level.
-- APPN Routing Services System Configuration Group
-- This group contains the objects that pertain to the setup and
-- configuration of APPN Routing Services at a global,
-- system-wide level.
nwAppnSysRouterId OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..17))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the APPN Fully-Qualified Control Point name that is used
to uniquely identify APPN Routing Services in an APPN network. The
name format is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network
identifier and CCCCCCCC is the Control Point name. Valid characters
to make up these two strings are uppercase letters A through Z,
numerics 0 through 9, and the special characters $, @, and #. The
first character of the string must NOT be numeric. Each string must
be a maximum length of 8 characters with no embedded spaces and the
strings are joined by a dot. nwAppnSysRouterId cannot be modified
while APPN routing services is in any operational state other than
DISABLED as reflected in nwAppnSysOperStatus. Otherwise, the
request will be rejected."
::= { nwAppnSysConfig 1 }
-- APPN Routing Services System Group
-- This group contains the objects related to initializing APPN Routing Services
-- at a global, system-wide level.
-- All parameters (except for Stop Type) cannot be modified unless the
-- operational state is disabled. Otherwise, the request will be rejected.
nwAppnSysNodeType OBJECT-TYPE
SYNTAX INTEGER {
networknode(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the node type supported by APPN Routing Services which
is always of type Network Node. "
DEFVAL { networknode }
::= { nwAppnSysCfgLocalNode 1 }
nwAppnSysCpAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the Control Point alias name used by APPN Routing
Services. "
::= { nwAppnSysCfgLocalNode 2 }
nwAppnSysModeCosMap OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether mode to COS mapping is supported by
APPN Routing Services."
DEFVAL { yes }
::= { nwAppnSysCfgLocalNode 3 }
nwAppnSysMdsSupport OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether Management Services supports Multiple
Domain Support and Management Services capabilities. "
DEFVAL { yes }
::= { nwAppnSysCfgLocalNode 4 }
nwAppnSysMaxLocates OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies maximum Number of locate requests that APPN Routing
Services can concurrently process. Note: if nwAppnSysMaxLocates is
set to a value too small, it will be internally increased to a
higher value after APPN Routing Services has been successfully
enabled. A subsequent GET operation on nwAppnSysMaxLocates will
reflect this new value."
DEFVAL { 10 }
::= { nwAppnSysCfgLocalNode 6 }
nwAppnSysDirCacheSize OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies number of located resources maintained in the Directory
Cache. Note: if nwAppnSysDirCacheSize is set to a value too small,
it will be internally increased to a higher value after APPN routing
services has been successfully enabled. A subsequent GET
operation on nwAppnSysDirCacheSize will reflect this new value. "
DEFVAL { 255 }
::= { nwAppnSysCfgLocalNode 7 }
nwAppnSysMaxDirEntries OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies maximum number of directory entries. If zero is selected,
the number of entries is unlimited. "
DEFVAL { 0 }
::= { nwAppnSysCfgLocalNode 8}
nwAppnSysLocateTimeout OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies time in seconds before a network search will timeout. Zero
indicates that the search has no timeout."
DEFVAL { 0 }
::= { nwAppnSysCfgLocalNode 9 }
nwAppnSysRegCds OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether the local or domain resources can be registered
with the Central Directory Server."
DEFVAL { yes }
::= { nwAppnSysCfgLocalNode 10 }
nwAppnSysMdsSendQSize OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies size of the MDS send alert Queue."
DEFVAL { 100 }
::= { nwAppnSysCfgLocalNode 11 }
nwAppnSysCosSize OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies maximum number of COS definitions maintained in the COS
database weights cache. It determines the size of the COS Database
weights cache. Note: if nwAppnSysCosSize is set to a value too
small, it will be internally increased to a higher value after
APPN Routing Services has been successfully enabled. A subsequent
GET operation on nwAppnSysCosSize will reflect this new value. "
DEFVAL { 16 }
::= { nwAppnSysCfgLocalNode 12 }
nwAppnSysTreeSize OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the number of routes maintained in the Topology Database
routing tree cache. Note: if nwAppnSysTreeSize is set to a value
too small, it will be internally increased to a higher value after
APPN Routing Services has been successfully enabled. A subsequent
GET operation on nwAppnSysTreeSize will reflect this new value. "
DEFVAL { 40 }
::= { nwAppnSysCfgLocalNode 13 }
nwAppnSysTreeUseLimit OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of times a cached tree will be used to compute a
route before the tree is discarded and recomputed. This
allows the APPN Routing Services to balance sessions among
equal weight routes. A low value provides better load balancing
at the expense of increased activation latency. "
DEFVAL { 40 }
::= { nwAppnSysCfgLocalNode 14 }
nwAppnSysMaxTdmNodes OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies maximum number of nodes that can be stored in the Topology
Database. Zero means unlimited. "
DEFVAL { 0 }
::= { nwAppnSysCfgLocalNode 15 }
nwAppnSysMaxTdmTGs OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies maximum number of transmission groups that can be stored in
Topology Database. Zero means unlimited. "
DEFVAL { 0 }
::= { nwAppnSysCfgLocalNode 16 }
nwAppnSysMaxIsrSessions OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies maximum number of intermediate routing sessions permitted
by APPN Routing Services at one time. This must be a non-negative
number."
DEFVAL { 1000 }
::= { nwAppnSysCfgLocalNode 18 }
nwAppnSysIsrUpperThresh OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The thresholds control the congestion status of APPN routing
services. If the number of ISR sessions exceeds the upper
threshold, congestion status changes from uncongested to congested.
When this occurs, the status will not become uncongested until the
the number of ISR sessions fall below the lower threshold. The
lower threshold should be less than the upper threshold to prevent
thrashing. The upper threshold should be lower than
nwAppnSysMaxIsrSessions. This must be a non-negative number."
DEFVAL { 900 }
::= { nwAppnSysCfgLocalNode 19 }
nwAppnSysIsrLowerThresh OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifes the number of ISR sessions at which congestion status will
revert to uncongested. This must be a non-negative number.
nwAppnSysIsrLowerThresh must be less than nwAppnSysIsrUpperThresh
to prevent thrashing. "
DEFVAL { 800 }
::= { nwAppnSysCfgLocalNode 20 }
nwAppnSysIsrMaxRuSize OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies maximum RU size supported for intermediate sessions.
Note: the number provided will be rounded up to the
next valid RU size if necessary after APPN Routing Services has
been successfully enabled. A subsequent GET operation on
nwAppnSysMaxLocates will reflect this new value."
DEFVAL { 1024 }
::= { nwAppnSysCfgLocalNode 21 }
nwAppnSysIsrRcvPaceWind OBJECT-TYPE
SYNTAX INTEGER (1..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies suggested receive pacing window size for intermediate
sessions. This value may be used as a fixed window size for
fixed pacing, or as a tuning value for adaptive pacing. "
DEFVAL { 8 }
::= { nwAppnSysCfgLocalNode 22 }
nwAppnSysRtAddResist OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies a desirability factor for APPN Routing Services to
perform intermediate session routing. 255 is least desirable
and 0 is more desirable. "
DEFVAL { 0 }
::= { nwAppnSysCfgLocalNode 23 }
nwAppnSysStopType OBJECT-TYPE
SYNTAX INTEGER {
abort(1), -- Shutdown APPN Routing Services immediately
immediate(2), -- deactivate links then abort(1)
quiesce(3), -- advertize quiesce, deactivate endpoint
-- sessions, then immediate(2)
quiesceIsr(4) -- allow all isr sessions to end then
-- quiesce(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the type of APPN Routing Services shutdown.
Once specified, select disable from nwAppnSysAdminStatus. The
shutdown choices are as follows:
abort(1) All APPN Routing Services components are immediately
stopped and resources released. To become active again,
the APPN Routing Services must be enabled.
immediate(2) APPN Routing Services immediately deactivates all links
then performs abort(1) processing.
quiesce(3) APPN Routing Services indicates to other APPN network
nodes that it is quiesced. Session limits
are reset on all modes, UNBINDs are issued
on all endpoint sessions (CP-CP sessions last),
and then immediate(2) processing is performed.
quiesceIsr(4) Allows all intermediate sessions to end,
then performs the quiesce(3) processing."
DEFVAL { quiesceIsr }
::= { nwAppnSysCfgLocalNode 24 }
nwAppnSysBlockNum OBJECT-TYPE
SYNTAX DisplayString (SIZE(3))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This represents the 3 hexadecimal digit block number which
precedes the 5 digit id number in the 8 digit node id used in
XIDs and Alerts. The block number identifies the product type.
Both the block number and id number combined, uniquely identify
this instance of APPN Routing Services within the installation
network."
-- DEFVAL { 'e08'H }
::= { nwAppnSysCfgLocalNode 25 }
nwAppnSysIdNum OBJECT-TYPE
SYNTAX DisplayString (SIZE(5))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This represents the 5 hexadecimal digit id number which follows
the 3 digit block number in the 8 digit node id used in XIDs and
Alerts. The id number uniquely identifies this instance of APPN
Routing Services within a product type indicated by the block number.
Both the block number and id number combined, uniquely identify
this instance of APPN Routing Services within the installation
network."
-- DEFVAL { '00000'H }
::= { nwAppnSysCfgLocalNode 26 }
-- APPN Router System Group - Local APPN Routing Service Parameters
-- This group contains tables related to configuring:
--
-- LU Definition Table
--
-- LU Table
--
nwAppnSysLuTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAppnSysLuEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains entries for LUs that are owned by adjacent
LEN nodes. Defining or deleting an entry is equivalent to defining
or deleting an entry in the directory database. To add an entry,
set nwAppnSysLuControl to other. To delete an entry, set
nwAppnSysLuControl to delete."
::= { nwAppnSysCfgTables 1 }
nwAppnSysLuEntry OBJECT-TYPE
SYNTAX NwAppnSysLuEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry defines an LU entry in the directory database. The
fully qualified CP name and the name of the LU are the indexes into
this table."
INDEX { nwAppnSysCpName, nwAppnSysLuName }
::= { nwAppnSysLuTable 1 }
NwAppnSysLuEntry ::= SEQUENCE {
nwAppnSysCpName DisplayString,
nwAppnSysLuName DisplayString,
nwAppnSysLuControl INTEGER
}
nwAppnSysCpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..17))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the fully qualified name of the Control Point
containing the LU being defined. The format of this name
is NNNNNNNN.CCCCCCCC where NNNNNNNN is the network identifier and
CCCCCCCC is the LU or Control Point name. Valid characters to make
up these two strings are uppercase letters A through Z, numerics 0
through 9 and the special charcters $, @, and #. The first character
of the name must NOT be numeric. Each string must be a maximum length
of 8 characters with no embedded spaces and the strings are joined by
a dot. This CP name must appear as an Adjacent CP in a link station
definition where the adjacent CP type is EN and CP-CP session support
is NO."
::= { nwAppnSysLuEntry 1 }
nwAppnSysLuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the name of the LU being registered. The name format is
LLLLLLLL where LLLLLLLL are the characters: uppercase letters
A through Z, numerics 0 through 9, and the special characters
$, @, and #. The first character of the name must NOT be numeric.
The string must be a maximum length of 8 characters with no
embedded spaces. Note that the nework identifier of the LU is
taken from the fully qualified control point name of the adjacent
LEN node (nwAppnSysCpName) which owns the LU. "
::= { nwAppnSysLuEntry 2 }
nwAppnSysLuControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this object to delete to remove an entry."
::= { nwAppnSysLuEntry 3 }
-- APPN System Administration Group
-- This group contains the objects that pertain to the administration of
-- APPN Routing Services at a global, system-wide level.
nwAppnSysAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disable(2), -- shut down APPN Routing Services
enabled(3) -- start up APPN Routing Services
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the system-wide administrative state of APPN Routing Services.
If enable(3) is selected, APPN Routing Services is activated.
There are two cases: the very first activation, and activations
subsequent to the successful first activation. Before activating
APPN Routing Services the very first time, nwAppnSysRouterId in
the System Configuration branch and all objects under
nwAppnSysCfgLocalNode must be assigned a value. If not explicitly
assigned, default values will be used for objects under
nwAppnSysCfgLocalNode. After this first activation has completed
successfully, all objects under nwAppnSysCfgLocalNode will be
saved in non-volatile RAM and restored for the next node activation
at power up time. After this subsequent power up, enable(3) may be
selected without setting nwAppnSysRouterId or any objects under
under nwAppnSysCfgLocalNode. Those values defined prior to the
last power up or reset will be used.
If disable(2) is selected, APPN Routing Services will become
inactive in the manner specifed by nwAppnSysStopType. To
modify objects under nwAppnSysCfgLocalNode, nwAppnSysAdminStatus
must be disabled. "
::= { nwAppnSysAdministration 1 }
nwAppnSysOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- inactive
enabled(3), -- active
pendingDisable(4), -- deactivate in progress
pendingEnable(5) -- activate in progress
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating system-wide status of APPN
Routing Services. "
::= { nwAppnSysAdministration 2 }
nwAppnSysAdminReset OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
reset(2) -- force a reset
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets APPN Routing Services system-wide. Reset (2) forces a
restart of APPN Routing Services without a graceful shutdown on
any active router ports, without affecting any other routing
services."
::= { nwAppnSysAdministration 3 }
nwAppnSysOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second, that
nwAppnOperStatus has been in its current state."
::= { nwAppnSysAdministration 4 }
nwAppnSysVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of APPN routing
services in textual format."
::= { nwAppnSysAdministration 5 }
-- APPN Forwarding Group
-- This group contains the managed objects used to setup and configure
-- APPN Routing Services for aggregate, system-wide, port Message Unit
-- (MU) and byte counters.
nwAppnFwdCtrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the aggregate, system-wide,
port Message Unit (MU) and byte counters. Enabled (3) causes
these counters to become active. Disabled (2) causes these
counters to become inactive."
::= { nwAppnFwdCounters 1 }
nwAppnFwdCtrReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the aggregate, system-wide port Message Unit (MU)
and byte counters. Reset (2) resets the aggregate counters to 0.
nwAppnFwdCtrOperationalTime is also reset to 0."
::= { nwAppnFwdCounters 2 }
nwAppnFwdCtrOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second,
that nwAppnFwdCtrAdminStatus has been in the current state."
::= { nwAppnFwdCounters 3 }
nwAppnFwdCtrInMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MU)s that have
been received system-wide (for all ports) during
nwAppnFwdCtrOperationalTime."
::= { nwAppnFwdCounters 4 }
nwAppnFwdCtrOutMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MU)s that have
been transmitted system-wide (for all ports) during
nwAppnFwdCtrOperationalTime."
::= { nwAppnFwdCounters 5 }
nwAppnFwdCtrFwdMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MU)s that have
been forwarded system-wide (for all ports) during
nwAppnFwdCtrOperationalTime."
::= { nwAppnFwdCounters 6 }
nwAppnFwdCtrFilteredMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdCounters 7 }
nwAppnFwdCtrDiscardMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdCounters 8 }
nwAppnFwdCtrAddrErrMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MUs)
that have been received system-wide (for all ports), during
nwAppnFwdCtrOperationalTime, that contain an address error(s)
in the SNA header."
::= { nwAppnFwdCounters 9 }
nwAppnFwdCtrLenErrMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MUs) that have
been received system-wide (for all ports), during
nwAppnFwdCtrOperationalTime, that contain a length error."
::= { nwAppnFwdCounters 10 }
nwAppnFwdCtrHdrErrMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MUs) that have
been received system-wide (for all ports), during
nwAppnFwdCtrOperationalTime, that contain an SNA header error
other than an address or length error."
::= { nwAppnFwdCounters 11 }
nwAppnFwdCtrInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates number of bytes in Message Units (MUs) that have
been received system-wide (for all ports), during
nwAppnFwdCtrOperationalTime."
::= { nwAppnFwdCounters 12 }
nwAppnFwdCtrOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in Message Units (MUs) that
have been forwarded system-wide (for all ports), during
nwAppnFwdCtrOperationalTime."
::= { nwAppnFwdCounters 13 }
nwAppnFwdCtrFwdBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in Message Units (MUs) that
have been forwarded system-wide (for all ports), during
nwAppnFwdCtrOperationalTime."
::= { nwAppnFwdCounters 14 }
nwAppnFwdCtrFilteredBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdCounters 15 }
nwAppnFwdCtrDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdCounters 16 }
nwAppnFwdCtrHostInMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MUs) that have
been delivered system-wide (for all ports), to local half
sessions during nwAppnFwdCtrOperationalTime."
::= { nwAppnFwdCounters 17 }
nwAppnFwdCtrHostOutMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MUs) that have
been successfully sent from local half sessions system-wide
(for all ports), to Path Control during
nwAppnFwdCtrOperationalTime."
::= { nwAppnFwdCounters 18 }
nwAppnFwdCtrHostDiscardMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdCounters 19 }
nwAppnFwdCtrHostInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in Message Units (MUs)
that have been delivered system-wide (for all ports), to
local half sessions during nwAppnFwdCtrOperationalTime."
::= { nwAppnFwdCounters 20 }
nwAppnFwdCtrHostOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in Message Units (MUs)
that have been successfully sent from local half sessions
system-wide (for all ports), to Path Control during
nwAppnFwdCtrOperationalTime."
::= { nwAppnFwdCounters 21 }
nwAppnFwdCtrHostDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdCounters 22 }
-- APPN Forwarding Port Table
-- This table contains the managed objects used to setup and configure
-- each port used by APPN Routing Services.
--
--
nwAppnFwdIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAppnFwdIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains an entry for each router port which can
be used by APPN Routing Services. This table is indexed by
nwAppnFwdIfIndex, which indicates the value of MIB 2 ifindex
which identifes the router port for which an entry exists.
These port configuration entries will be provided automatically
based on physical port configuration. Such entries cannot be
deleted - only modified."
::= { nwAppnFwdIfConfig 1 }
nwAppnFwdIfEntry OBJECT-TYPE
SYNTAX NwAppnFwdIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies the APPN Routing Services port
configuration for the router port for which the entry exists."
INDEX { nwAppnFwdIfIndex }
::= { nwAppnFwdIfTable 1 }
NwAppnFwdIfEntry ::=
SEQUENCE {
nwAppnFwdIfIndex INTEGER,
nwAppnFwdIfAdminStatus INTEGER,
nwAppnFwdIfOperStatus INTEGER,
nwAppnFwdIfOperationalTime TimeTicks,
nwAppnFwdIfControl INTEGER,
nwAppnFwdIfMtu INTEGER,
nwAppnFwdIfForwarding INTEGER,
nwAppnFwdIfFrameType INTEGER,
nwAppnFwdIfAclIdentifier INTEGER,
nwAppnFwdIfAclStatus INTEGER,
nwAppnFwdIfCacheControl INTEGER,
nwAppnFwdIfCacheEntries Counter,
nwAppnFwdIfCacheHits Counter,
nwAppnFwdIfCacheMisses Counter
}
nwAppnFwdIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of MIB2 ifindex, which identifies the
router port for which the entry exists. "
::= { nwAppnFwdIfEntry 1 }
nwAppnFwdIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of an APPN Routing Services
port for which the entry exists. enabled(3) causes the
APPN Routing Services port to become active. disable(2)
causes it to become inactive. There are various choices
for the method by which the port can be disabled, which are
enumerated by nwAppnExtIfStopType. "
::= { nwAppnFwdIfEntry 2 }
nwAppnFwdIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- inactive
enabled(3), -- active
pendingDisable(4), -- deactivate in progress
pendingEnable(5) -- activate in progress
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current operating condition of the APPN Routing
Services port for which the entry exists."
::= { nwAppnFwdIfEntry 3 }
nwAppnFwdIfOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second, that
nwAppnFwdIfOperStatus has been in the current state."
::= { nwAppnFwdIfEntry 4 }
nwAppnFwdIfControl OBJECT-TYPE
SYNTAX INTEGER {
other(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs. Setting this object has no effect."
::= { nwAppnFwdIfEntry 5 }
nwAppnFwdIfMtu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs. Setting this object has no effect."
::= { nwAppnFwdIfEntry 6 }
nwAppnFwdIfForwarding OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs. Setting this object has no effect."
::= { nwAppnFwdIfEntry 7 }
nwAppnFwdIfFrameType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
ethernet(2),
i8022(4),
sync(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the framing type for the APPN Routing Services port
for which the entry exists. "
::= { nwAppnFwdIfEntry 8 }
nwAppnFwdIfAclIdentifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs. Setting this object has no effect."
::= { nwAppnFwdIfEntry 9 }
nwAppnFwdIfAclStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs. Setting this object has no effect."
::= { nwAppnFwdIfEntry 10 }
nwAppnFwdIfCacheControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs. Setting this object has no effect."
::= { nwAppnFwdIfEntry 11 }
nwAppnFwdIfCacheEntries OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs. Setting this object has no effect."
::= { nwAppnFwdIfEntry 12 }
nwAppnFwdIfCacheHits OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs. Setting this object has no effect."
::= { nwAppnFwdIfEntry 13 }
nwAppnFwdIfCacheMisses OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs. Setting this object has no effect."
::= { nwAppnFwdIfEntry 14 }
-- The APPN Routing Services Port Extension Table
-- This table contains additional objects used to setup and configure
-- APPN Routing Services on a per port basis.
nwAppnExtensionTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAppnExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains additional APPN definitions for each
physical port. Entries cannot be added to or deleted from this
table. With the exception of nwAppnExtIfStopType, objects in
this table may only be modified when nwAppnFwdIfAdminStatus
is disabled. Note: if APPN Routing Services is not active, no
entries will exist for this table. "
::= { nwAppnFwdIfConfig 2 }
nwAppnExtEntry OBJECT-TYPE
SYNTAX NwAppnExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies additional APPN configuration parameters
for the port for which this entry exists."
INDEX { nwAppnExtIfIndex }
::= { nwAppnExtensionTable 1 }
NwAppnExtEntry ::=
SEQUENCE {
nwAppnExtIfIndex INTEGER,
nwAppnExtIfPortName DisplayString,
nwAppnExtIfPortType INTEGER,
nwAppnExtIfDlcType INTEGER,
nwAppnExtIfMaxRBtuSize INTEGER,
nwAppnExtIfTotLsActLim INTEGER,
nwAppnExtIfInbLsActLim INTEGER,
nwAppnExtIfOutbLsActLim INTEGER,
nwAppnExtIfLocalLsRole INTEGER,
nwAppnExtIfActXidXchgLimit INTEGER,
nwAppnExtIfNonActXidXchgLimit INTEGER,
nwAppnExtIfLsXmitRcvCap INTEGER,
nwAppnExtIfMaxIfrmRcvd INTEGER,
nwAppnExtIfDfltTargetPacing INTEGER,
nwAppnExtIfDfltMaxSBtuSize INTEGER,
nwAppnExtIfDfltEffectCap INTEGER,
nwAppnExtIfDfltConnectCost INTEGER,
nwAppnExtIfDfltByteCost INTEGER,
nwAppnExtIfDfltSecurity INTEGER,
nwAppnExtIfDfltPropDelay INTEGER,
nwAppnExtIfDfltUsrDef1 INTEGER,
nwAppnExtIfDfltUsrDef2 INTEGER,
nwAppnExtIfDfltUsrDef3 INTEGER,
nwAppnExtIfStopType INTEGER,
nwAppnExtIfCpCpSupp INTEGER,
nwAppnExtIfLimitedRsrc INTEGER,
nwAppnExtIfAddress OCTET STRING,
nwAppnExtIfSsap OCTET STRING
}
nwAppnExtIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the primary index into the APPN port extension table.
This number corresponds to the index into the nwAppnFwdIfTable. "
::= { nwAppnExtEntry 1 }
nwAppnExtIfPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the user friendly name for this port. "
::= { nwAppnExtEntry 2 }
nwAppnExtIfPortType OBJECT-TYPE
SYNTAX INTEGER {
nonswitched(1),
switched(2),
satf(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the type of line used by the port. The value
corresponds to one of the following: nonswitched(1),
switched(2), or satf(3). "
::= { nwAppnExtEntry 4 }
nwAppnExtIfDlcType OBJECT-TYPE
SYNTAX INTEGER {
llc2(1),
sdlc(2),
x25(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the type of DLC using the port. "
::= { nwAppnExtEntry 5 }
nwAppnExtIfMaxRBtuSize OBJECT-TYPE
SYNTAX INTEGER (99..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum Message Unit (MU) size that can be received. "
DEFVAL { 2048 }
::= { nwAppnExtEntry 6 }
nwAppnExtIfTotLsActLim OBJECT-TYPE
SYNTAX INTEGER (1..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the total number of links that can be active on this
port. If nwAppnExtIfPortType = nonswitched(1) and
nwAppnExtIfLocalLsRole = negotiable(1), or secondary(3), then
this value must be set to 1. "
DEFVAL { 16 }
::= { nwAppnExtEntry 7 }
nwAppnExtIfInbLsActLim OBJECT-TYPE
SYNTAX INTEGER (0..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the total number of inbound links that can be active on
this port. If nwAppnExtIfPortType = nonswitched(1) and
nwAppnExtIfLocalLsRole = negotiable(1) or primary(2), then this
value must be set to 0. "
DEFVAL { 8 }
::= { nwAppnExtEntry 8 }
nwAppnExtIfOutbLsActLim OBJECT-TYPE
SYNTAX INTEGER (0..256)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the total number of outbound links that can be active on
this port. If nwAppnExtIfPortType = nonswitched(1) and
nwAppnExtIfLocalLsRole = negotiable(1), then this value must be
set to 0. If nwAppnExtIfLocalLsRole = primary(2), then this value
must be set the same as nwAppnExtIfTotLsActLim. "
DEFVAL { 8 }
::= { nwAppnExtEntry 9 }
nwAppnExtIfLocalLsRole OBJECT-TYPE
SYNTAX INTEGER { negotiable(1),
primary(2),
secondary(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the link station role - primary, secondary, or
negotiable. For nwAppnExtIfPortType = satf(3), the link station
role must be negotiable(1). "
DEFVAL { negotiable }
::= { nwAppnExtEntry 10 }
nwAppnExtIfActXidXchgLimit OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the total number of activation XIDs that may be
exchanged. "
DEFVAL { 9 }
::= { nwAppnExtEntry 11 }
nwAppnExtIfNonActXidXchgLimit OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the total number of non-activation XIDs that may be
exchanged. "
DEFVAL { 5 }
::= { nwAppnExtEntry 12 }
nwAppnExtIfLsXmitRcvCap OBJECT-TYPE
SYNTAX INTEGER { twowaysimultaneous(1),
twowayalternating(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the link station's transmit/receive capability. "
DEFVAL { twowaysimultaneous }
::= { nwAppnExtEntry 13 }
nwAppnExtIfMaxIfrmRcvd OBJECT-TYPE
SYNTAX INTEGER (1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum number of I-frames received before an
acknowledgment is sent to the sender. "
DEFVAL { 4 }
::= { nwAppnExtEntry 14 }
nwAppnExtIfDfltTargetPacing OBJECT-TYPE
SYNTAX INTEGER (1..32767)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the pacing window size for BINDs on this transmission
group. "
DEFVAL { 7 }
::= { nwAppnExtEntry 15 }
nwAppnExtIfDfltMaxSBtuSize OBJECT-TYPE
SYNTAX INTEGER (99..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum Message Unit (MU) size which can be sent. "
DEFVAL { 2048 }
::= { nwAppnExtEntry 16 }
nwAppnExtIfDfltEffectCap OBJECT-TYPE
SYNTAX INTEGER (0..603979776)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the default maximum kilo bits per second rate
(line speed) for all links on this port. "
::= { nwAppnExtEntry 17 }
nwAppnExtIfDfltConnectCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the default cost per connect time for all link
stations on this port. 0 is the lowest cost and 255 is the
largest cost. "
::= { nwAppnExtEntry 18 }
nwAppnExtIfDfltByteCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the default Cost per Byte for link stations. 0 is
the lowest cost and 255 is the largest cost. "
::= { nwAppnExtEntry 19 }
nwAppnExtIfDfltSecurity OBJECT-TYPE
SYNTAX INTEGER { nonsecure(1), --X'01'
publicSwitchNw(32), --X'20'
undergroundCable(64), --X'40'
secureConduit(96), --X'60'
guardedConduit(128), --X'80'
encrypted(160), --X'A0'
guardedRadiation(192) --X'C0'
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specify one of the following security selections:
non-secure - specifies no security.
public switched - data flows over a public switched
network.
underground cable - data transmitted over a secure
underground cable.
secure conduit - line is secure conduit that is not
guarded.
guarded conduit - conduit that is protected against
physical tapping.
encrypted - encryption over the line.
guarded radiation - line is proected against physical
and radiation tapping. "
::= { nwAppnExtEntry 20 }
nwAppnExtIfDfltPropDelay OBJECT-TYPE
SYNTAX INTEGER {
minimum(0), --X'00'
negligible(384), --X'4C'
terrestrial(9216), --X'71'
packetswitched(147456), --X'91'
long(294912), --X'99'
maximum(2013265920) --X'FF'
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the propagation delay which represents the relative
time it takes for a signal to travel the length of the link in
microseconds, with some of the more common default values
enumerated. The default times in parentheses are in microseconds.
These default values fall into the following ranges:
minimum - no propagation delay
negligible, lan - less than 480 microseconds
terrestrial, telephone - between 480 and 49,512
microseconds
packetswitched - between 49,512 and 245,760
microseconds
long, satellite - more than 245760 microseconds.
maximum - the maximum propagation delay. "
::= { nwAppnExtEntry 21 }
nwAppnExtIfDfltUsrDef1 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies user defined parameter 1. "
DEFVAL { 128 }
::= { nwAppnExtEntry 22 }
nwAppnExtIfDfltUsrDef2 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies user defined parameter 2. "
DEFVAL { 128 }
::= { nwAppnExtEntry 23 }
nwAppnExtIfDfltUsrDef3 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies user defined parameter 3. "
DEFVAL { 128 }
::= { nwAppnExtEntry 24 }
nwAppnExtIfStopType OBJECT-TYPE
SYNTAX INTEGER {
immediate(1),
orderly(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the type of shutdown for APPN Routing Services
on the port. Once set, nwAppnFwdIfAdminStatus may
be set to disable. The disable choices are as follows:
immediate(1) causes the link stations belonging to the
physical port to be disabled immediately
without flushing pending messages and
without initiating an orderly disconnect sequence.
orderly(2) causes pending messages in link stations to be
flushed, followed by an orderly disconnect
sequence. The link station is then disabled. "
DEFVAL { orderly }
::= { nwAppnExtEntry 25 }
nwAppnExtIfCpCpSupp OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether CP-CP sessions are permitted on dynamic
links generated on this port. "
DEFVAL { yes }
::= { nwAppnExtEntry 26 }
nwAppnExtIfLimitedRsrc OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether dynamic links generated on this port
are a limited resource. A limited resource link will
be deactivated when there are no sessions using the link."
DEFVAL { no }
::= { nwAppnExtEntry 27 }
nwAppnExtIfAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the physical address of this port depending on the
media type. For token ring or ethernet ports, the information is
the 6 byte MAC address which starts in byte 1 and ends in byte 6.
For token ring ports the MAC address must be specified in non-
canonical format. For ethernet ports the MAC address must be
specified in canonical format. For frame relay ports, there is
no associated address, i.e., it will be a zero length octet string."
::= { nwAppnExtEntry 28 }
nwAppnExtIfSsap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For token ring or ethernet ports specifies the Source SAP Address
of this port. "
DEFVAL { '04'h }
::= { nwAppnExtEntry 29 }
--
-- Connection Network Tables
--
nwAppnIfCnPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAppnIfCnPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains definitions for the Connection
Network port table which defines which local ports can
access a connection network. To add a row to the table,
nwAppnIfCnPtFqName and nwAppnIfCnPtName are required entries.
To delete a row, set the control field to delete.
Adding the first row for a connection network implicitly
creates the connection network and deleting the last
remaining row for a connection network implicitly removes
the connection network."
::= { nwAppnIfCn 1 }
nwAppnIfCnPortEntry OBJECT-TYPE
SYNTAX NwAppnIfCnPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Specifies the APPN Connection Network port definitions."
INDEX { nwAppnIfCnPtFqName, nwAppnIfCnPtName }
::= { nwAppnIfCnPortTable 1 }
NwAppnIfCnPortEntry ::=
SEQUENCE {
nwAppnIfCnPtFqName DisplayString,
nwAppnIfCnPtName DisplayString,
nwAppnIfCnPtControl INTEGER
}
nwAppnIfCnPtFqName OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..17))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the fully-qualified Name of the Virtual Routing Node.
The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN is the
network identifier and CCCCCCCC is the Control Point name. Valid
characters to make up these two strings are uppercase letters
A through Z, numerics 0 through 9, and the special characters
$, @, and #. The first character of the name must NOT be
numeric. Each string must be a maximum length of 8 characters
with no embedded spaces and the strings are joined by a dot. "
::= { nwAppnIfCnPortEntry 1 }
nwAppnIfCnPtName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies one of the ports which can access this Connection
Network."
::= { nwAppnIfCnPortEntry 2 }
nwAppnIfCnPtControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this object to delete to delete this port from this
Connection Network."
::= { nwAppnIfCnPortEntry 3 }
nwAppnIfCnTgCharTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAppnIfCnTgCharEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the APPN definitions for a Connection
Network's transmission group characteristics. Rows may be
neither added nor deleted, only modified. Rows are
added/deleted implicitly through CnPortTable."
::= { nwAppnIfCn 2 }
nwAppnIfCnTgCharEntry OBJECT-TYPE
SYNTAX NwAppnIfCnTgCharEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Specifies the APPN transmission group characteristics for
the Connection Network."
INDEX { nwAppnIfCnTgFqName }
::= { nwAppnIfCnTgCharTable 1 }
NwAppnIfCnTgCharEntry ::=
SEQUENCE {
nwAppnIfCnTgFqName DisplayString,
nwAppnIfCnTgEffectCap INTEGER,
nwAppnIfCnTgConnectCost INTEGER,
nwAppnIfCnTgByteCost INTEGER,
nwAppnIfCnTgSecurity INTEGER,
nwAppnIfCnTgPropDelay INTEGER,
nwAppnIfCnTgUsrDef1 INTEGER,
nwAppnIfCnTgUsrDef2 INTEGER,
nwAppnIfCnTgUsrDef3 INTEGER
}
nwAppnIfCnTgFqName OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..17))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the fully-qualified Name of the Virtual Routing Node.
The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN is the
network identifier and CCCCCCCC is the Control Point name. Valid
characters to make up these two strings are uppercase letters
A through Z, numerics 0 through 9, and the special characters
#, $, and @. The first character of the name must NOT be
numeric. Each string must be a maximum length of 8 characters
with no embedded spaces and the strings are joined by a dot. "
::= { nwAppnIfCnTgCharEntry 1 }
nwAppnIfCnTgEffectCap OBJECT-TYPE
SYNTAX INTEGER (0..603979776)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the maximum kilo bits per second rate (link speed) for
the connection network. "
::= { nwAppnIfCnTgCharEntry 2 }
nwAppnIfCnTgConnectCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the cost per connect time for the Connection Network.
0 is the lowest cost and 255 is the largest cost."
::= { nwAppnIfCnTgCharEntry 3 }
nwAppnIfCnTgByteCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the cost per byte for the Connection Network.
0 is the lowest cost and 255 is the largest cost."
::= { nwAppnIfCnTgCharEntry 4 }
nwAppnIfCnTgSecurity OBJECT-TYPE
SYNTAX INTEGER { nonsecure(1), --X'01'
publicSwitchNw(32), --X'20'
undergroundCable(64), --X'40'
secureConduit(96), --X'60'
guardedConduit(128), --X'80'
encrypted(160), --X'A0'
guardedRadiation(192) --X'C0'
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the Connection Network, specify one of the following
security selections:
non-secure - specifies no security.
public switched - data flows over a public switched
network.
underground cable - data transmitted over a secure
underground cable.
secure conduit - line is secure conduit that is not
guarded.
guarded conduit - conduit that is protected against
physical tapping.
encrypted - encryption over the line.
guarded radiation - line is proected against physical
and radiation tapping. "
::= { nwAppnIfCnTgCharEntry 5 }
nwAppnIfCnTgPropDelay OBJECT-TYPE
SYNTAX INTEGER {
minimum(0), --X'00'
negligible(384), --X'4C'
terrestrial(9216), --X'71'
packetswitched(147456), --X'91'
long(294912), --X'99'
maximum(2013265920) --X'FF'
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the propagation delay which represents the time it
takes for a signal to travel the length of the link in
microseconds, with some of the more common default values
enumerated. The default times in parentheses are in microseconds.
These default values fall into the following ranges:
minimum - no propagation delay
negligible, lan - less than 480 microseconds
terrestrial, telephone - between 480 and 49,512
microseconds
packetswitched - between 49,512 and 245,760
microseconds
long, satellite - more than 245760 microseconds.
maximum - the maximum propagation delay. "
::= { nwAppnIfCnTgCharEntry 6 }
nwAppnIfCnTgUsrDef1 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies user defined parameter 1. "
DEFVAL { 128 }
::= { nwAppnIfCnTgCharEntry 7 }
nwAppnIfCnTgUsrDef2 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies user defined parameter 2. "
DEFVAL { 128 }
::= { nwAppnIfCnTgCharEntry 8 }
nwAppnIfCnTgUsrDef3 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies user defined parameter 3. "
DEFVAL { 128 }
::= { nwAppnIfCnTgCharEntry 9 }
-- APPN Forwarding Ports Counter Table
-- This table contains the objects that specify the Message Unit (MU) and byte
-- counters for each port used by APPN Routing Services.
--
--
nwAppnFwdIfCtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAppnFwdIfCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the Message Unit (MU) and byte counters for
each port configured and enabled for APPN Routing Services. "
::= { nwAppnFwdIfCounters 1 }
nwAppnFwdIfCtrEntry OBJECT-TYPE
SYNTAX NwAppnFwdIfCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry indicates Message Units (MU) and byte counts on
the router port for which this entry exists."
INDEX { nwAppnFwdIfCtrIfIndex }
::= { nwAppnFwdIfCtrTable 1 }
NwAppnFwdIfCtrEntry ::=
SEQUENCE {
nwAppnFwdIfCtrIfIndex INTEGER,
nwAppnFwdIfCtrAdminStatus INTEGER,
nwAppnFwdIfCtrReset INTEGER,
nwAppnFwdIfCtrOperationalTime TimeTicks,
nwAppnFwdIfCtrInMus Counter,
nwAppnFwdIfCtrOutMus Counter,
nwAppnFwdIfCtrFwdMus Counter,
nwAppnFwdIfCtrFilteredMus Counter,
nwAppnFwdIfCtrDiscardMus Counter,
nwAppnFwdIfCtrAddrErrMus Counter,
nwAppnFwdIfCtrLenErrMus Counter,
nwAppnFwdIfCtrHdrErrMus Counter,
nwAppnFwdIfCtrInBytes Counter,
nwAppnFwdIfCtrOutBytes Counter,
nwAppnFwdIfCtrFwdBytes Counter,
nwAppnFwdIfCtrFilteredBytes Counter,
nwAppnFwdIfCtrDiscardBytes Counter,
nwAppnFwdIfCtrHostInMus Counter,
nwAppnFwdIfCtrHostOutMus Counter,
nwAppnFwdIfCtrHostDiscardMus Counter,
nwAppnFwdIfCtrHostInBytes Counter,
nwAppnFwdIfCtrHostOutBytes Counter,
nwAppnFwdIfCtrHostDiscardBytes Counter
}
nwAppnFwdIfCtrIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of MIB 2 ifindex, which identifies the
router port for which the entry exists. This is the primary
index into the APPN per-port counter table. "
::= { nwAppnFwdIfCtrEntry 1 }
nwAppnFwdIfCtrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the per-port Message Unit
(MU) and byte counters on the router port for which the entry
exists. enabled(3) causes these counters to become active.
disabled(2) causes these counters to become inactive."
::= { nwAppnFwdIfCtrEntry 2 }
nwAppnFwdIfCtrReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the per-port Message Unit (MU) and byte counters on the
router port for which this entry exists. reset (2) resets the
counters to 0. nwAppnFwdIfCtrOperationalTime is also reset to 0."
::= { nwAppnFwdIfCtrEntry 3 }
nwAppnFwdIfCtrOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the amount of time in hundreths of a second that the
per-port Message Unit (MU) and byte counters have been active on
the APPN routing services port for which this entry exists."
::= { nwAppnFwdIfCtrEntry 4 }
nwAppnFwdIfCtrInMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MU)s that have been
received, during nwAppnFwdIfCtrOperationaltime on the router port
for which this entry exists."
::= { nwAppnFwdIfCtrEntry 5 }
nwAppnFwdIfCtrOutMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MU)s that have been
transmitted, during nwAppnFwdIfCtrOperationalTime, on the router
port for which this entry exists."
::= { nwAppnFwdIfCtrEntry 6 }
nwAppnFwdIfCtrFwdMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MU)s that have
been forwarded during nwAppnFwdIfCtrOperationalTime on the router
port for which this entry exists."
::= { nwAppnFwdIfCtrEntry 7 }
nwAppnFwdIfCtrFilteredMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdIfCtrEntry 8 }
nwAppnFwdIfCtrDiscardMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdIfCtrEntry 9 }
nwAppnFwdIfCtrAddrErrMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MUs) that contain
an address error in the SNA header that have been received
during nwAppnFwdIfCtrOperationalTime on the router port for which
this entry exists."
::= { nwAppnFwdIfCtrEntry 10 }
nwAppnFwdIfCtrLenErrMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MUs) that contain
a length error that have been received during
nwAppnFwdIfCtrOperationalTime on the router port for which
this entry exists."
::= { nwAppnFwdIfCtrEntry 11 }
nwAppnFwdIfCtrHdrErrMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MUs) that contain
a header error other than an address or length error that have
been received during nwAppnFwdIfCtrOperationalTime on the router
port for which this entry exists."
::= { nwAppnFwdIfCtrEntry 12 }
nwAppnFwdIfCtrInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the Message Units (MU)s
that have been received, during nwAppnFwdIfCtrOperationalTime,
on the router port for which the entry exists."
::= { nwAppnFwdIfCtrEntry 13 }
nwAppnFwdIfCtrOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in the Message Units (MU)s
that have been transmitted, during nwAppnFwdIfCtrOperationalTime,
on the router port for which the entry exists."
::= { nwAppnFwdIfCtrEntry 14 }
nwAppnFwdIfCtrFwdBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in Message Units (MU)s that
have been forwarded during nwAppnFwdIfCtrOperationalTime on the
router port for which this entry exists."
::= { nwAppnFwdIfCtrEntry 15 }
nwAppnFwdIfCtrFilteredBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdIfCtrEntry 16 }
nwAppnFwdIfCtrDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdIfCtrEntry 17 }
nwAppnFwdIfCtrHostInMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MUs) that have
been delivered to local half sessions during
nwAppnFwdIfCtrOperationalTime on the router port for which this
entry exists."
::= { nwAppnFwdIfCtrEntry 18 }
nwAppnFwdIfCtrHostOutMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of Message Units (MUs) that have
been successfully sent from local half sessions to Path Control
during nwAppnFwdIfCtrOperationalTime on the router port for
which this entry exists."
::= { nwAppnFwdIfCtrEntry 19 }
nwAppnFwdIfCtrHostDiscardMus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdIfCtrEntry 20 }
nwAppnFwdIfCtrHostInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in Message Units (MUs)
that have been delivered to local half sessions during
nwAppnFwdIfCtrOperationalTime on the router port for which this
entry exists."
::= { nwAppnFwdIfCtrEntry 21 }
nwAppnFwdIfCtrHostOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the total number of bytes in Message Units (MUs) that
have been successfully sent from local half sessions to Path
Control during nwAppnFwdIfCtrOperationalTime on the router port
for which this entry exists."
::= { nwAppnFwdIfCtrEntry 22 }
nwAppnFwdIfCtrHostDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdIfCtrEntry 23 }
-- APPN Forwarding Adjacent Link Station Table
-- This table contains the managed objects used to set up and configure
-- links to adjacent link stations. Only those links that are configured by the
-- user can be modified. Links which are active cannot be modified.
-- If an attempt is made to modify an active link, the operational status
-- will indicate busy-failed.
nwAppnFwdLsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAppnFwdLsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the configuration and management
information for links to adjacent link stations. This table is
indexed by nwAppnFwdLsName. Operations which apply are add,
delete, modify, enable, and disable. To add a row to the
table, the required fields in the row must be provided.
The required fields are nwAppnFwdLsPortName and
nwAppnFwdLsDestAddr. All other fields which are not provided
will be defaulted. To enable a link select enable(3) from
nwAppnFwdLsAdminStatus. To delete a row, set nwAppnFwdLsControl
to delete(3). To disable a link set nwAppnFwdLsStopType and
then select disable(2) in nwAppnFwdLsAdminStatus.
If nwAppnFwdLsStopType is not selected, the link is disabled in
an orderly fashion. "
::= { nwAppnFwdLsConfig 1 }
nwAppnFwdLsEntry OBJECT-TYPE
SYNTAX NwAppnFwdLsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Specifies the configuration for a link to an adjacent link
station for which the entry exists."
INDEX { nwAppnFwdLsName }
::= { nwAppnFwdLsTable 1 }
NwAppnFwdLsEntry ::=
SEQUENCE {
nwAppnFwdLsName DisplayString,
nwAppnFwdLsAdminStatus INTEGER,
nwAppnFwdLsOperStatus INTEGER,
nwAppnFwdLsOperationalTime TimeTicks,
nwAppnFwdLsControl INTEGER,
nwAppnFwdLsPortName DisplayString,
nwAppnFwdLsAdjCpName DisplayString,
nwAppnFwdLsAdjCpType INTEGER,
nwAppnFwdLsAutoActSupport INTEGER,
nwAppnFwdLsLimitedRsrc INTEGER,
nwAppnFwdLsSscpSession INTEGER,
nwAppnFwdLsPuName DisplayString,
nwAppnFwdLsBackLvlLenEN INTEGER,
nwAppnFwdLsCpCpSessSupp INTEGER,
nwAppnFwdLsEffectCap INTEGER,
nwAppnFwdLsConnectCost INTEGER,
nwAppnFwdLsByteCost INTEGER,
nwAppnFwdLsSecurity INTEGER,
nwAppnFwdLsPropDelay INTEGER,
nwAppnFwdLsUsrDef1 INTEGER,
nwAppnFwdLsUsrDef2 INTEGER,
nwAppnFwdLsUsrDef3 INTEGER,
nwAppnFwdLsTrgtPacingCount INTEGER,
nwAppnFwdLsMaxSendBtu INTEGER,
nwAppnFwdLsNumActiveSession INTEGER,
nwAppnFwdLsdynamicLs INTEGER,
nwAppnFwdLsStopType INTEGER,
nwAppnFwdLsPortNbr INTEGER,
nwAppnFwdLsDestAddr OCTET STRING,
nwAppnFwdLsDsap OCTET STRING,
nwAppnFwdLsBlockNum DisplayString,
nwAppnFwdLsIdNum DisplayString
}
nwAppnFwdLsName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the primary index to the adjacent link station table
(nwAppnFwdLsTable). "
::= { nwAppnFwdLsEntry 1 }
nwAppnFwdLsAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of a link to an adjacent
link station. enabled(3) causes the link to become established.
disable(2) causes the link to terminate. There are various
severities of disabling a link which are selected via the leaf
node nwAppnFwdLsStopType described further within this branch. "
::= { nwAppnFwdLsEntry 2 }
nwAppnFwdLsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- inactive
enabled(3), -- active
pendingDisable(4), -- deactivate in progress
pendingEnable(5) -- activate in progress
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the current operating status of the link for which this
entry exists."
::= { nwAppnFwdLsEntry 3 }
nwAppnFwdLsOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the elapsed time, in hundredths of a second, that
nwAppnFwdLsAdminStatus has been either enabled or DISABLED.
If the operational state is pending-disable,
nwAppnFwdLsOperationalTime indicates the amount of time since
the state was enabled. If the operational state is pending-enable,
nwAppnFwdLsOperationalTime indicates the amount of time since the
state was DISABLED."
::= { nwAppnFwdLsEntry 4 }
nwAppnFwdLsControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set this object to delete in order to delete the entry."
::= { nwAppnFwdLsEntry 5 }
nwAppnFwdLsPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This link station port name corresponds to the port name
index into the the nwAppnExtensionTable which describes the
router port on which the adjacent link station is defined."
::= { nwAppnFwdLsEntry 6 }
nwAppnFwdLsAdjCpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (3..17))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the fully-qualified, 17 byte long, adjacent Control
Point name. The name format is NNNNNNNN.CCCCCCCC where NNNNNNNN
is the network identifier and CCCCCCCC is the Control Point name.
Valid characters to make up these two strings are uppercase
letters A through Z, numerics 0 through 9, and the special
characters $, # and @. The first character of the name must NOT
be numeric. Each string must be a maximum length of 8 characters
with no embedded spaces and the strings are joined by a dot. "
::= { nwAppnFwdLsEntry 7 }
nwAppnFwdLsAdjCpType OBJECT-TYPE
SYNTAX INTEGER { endnode(1), networknode(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the adjacent node type. The following values are
valid: endnode(1), networknode(2). endnode(1) includes both
End Node and LEN node types."
DEFVAL { endnode }
::= { nwAppnFwdLsEntry 8 }
nwAppnFwdLsAutoActSupport OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether the link is automatically enabled when
a session is activated over the link. It is an error to set
this to yes(1) when nwAppnFwdLsCpCpSessSupp is set to yes(1). "
DEFVAL { no }
::= { nwAppnFwdLsEntry 10 }
nwAppnFwdLsLimitedRsrc OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether this link is to be deactivated when
there are no sessions using the link. If
nwAppnFwdLsCpCpSessSupp is yes, however, the link will
not be deactivated if CP-CP sessions are terminated.
Note also that a link over a non-switched port cannot
be configured as a limited resource."
DEFVAL { no }
::= { nwAppnFwdLsEntry 11 }
nwAppnFwdLsSscpSession OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Requests a host system to initiate sessions between its SSCP and
dependent LUs within APPN Routing Services. If set to yes,
then nwAppnFwdLsPuName is required. Note: once this parameter
is set along with other link station parameters associated with
a link station definition, it cannot be modified. In order to
change it, the link station definition itself must be deleted and
then redefined with the new parameter."
DEFVAL { no }
::= { nwAppnFwdLsEntry 12 }
nwAppnFwdLsPuName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the name of the local PU if nwAppnFwdLsSscpSession is
set to yes. Valid characters are uppercase A through Z and
numerics 0 through 9. The name must start with an alphabetic
character. Note: once this parameter is set along with other
link station parameters associated with a link station definition,
it cannot be modified. In order to change it, the link station
definition itself must be deleted and then redefined with the new
parameter."
::= { nwAppnFwdLsEntry 13 }
nwAppnFwdLsBackLvlLenEN OBJECT-TYPE
SYNTAX INTEGER { no(1), xid3(2), xid0(3), noxid(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether or not the adjacent node is a back level
LEN Node. If so, specify the type of back level LEN node as
follows:
xid3(2) - supports XID-3 protocols, but does not include
Network Name control vector in the XID.
xid0(3) - Supports XID-0 protocols. Not valid if
nwAppnExtIfLocalLsRole is negotiable(1).
noxid(4) - Does not support XID protocols. Valid only if
nwAppnExtIfPortType is nonswitched(1) and not
valid if nwAppnExtIfLocalLsRole is negotiable(1).
If not no(1), then nwAppnFwdLsAdjCpName and nwAppnFwdLsIdNum
must be specified. "
DEFVAL { no }
::= { nwAppnFwdLsEntry 14 }
nwAppnFwdLsCpCpSessSupp OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether this link supports CP to CP sessions."
DEFVAL { yes }
::= { nwAppnFwdLsEntry 16 }
nwAppnFwdLsEffectCap OBJECT-TYPE
SYNTAX INTEGER (0..603979776)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies th maximum kilo bits per second rate (link speed)
for the link. "
::= { nwAppnFwdLsEntry 17 }
nwAppnFwdLsConnectCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the cost per connect time for the link. Zero is the
lowest cost and 255 is the largest cost."
::= { nwAppnFwdLsEntry 18 }
nwAppnFwdLsByteCost OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the cost per Byte for the link. Zero is the lowest
cost and 255 is the largest cost."
::= { nwAppnFwdLsEntry 19 }
nwAppnFwdLsSecurity OBJECT-TYPE
SYNTAX INTEGER { nonsecure(1), --X'01'
publicSwitchNw(32), --X'20'
undergroundCable(64), --X'40'
secureConduit(96), --X'60'
guardedConduit(128), --X'80'
encrypted(160), --X'A0'
guardedRadiation(192) --X'C0'
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Security selections available for the link are as follows:
non-secure - specifies no security.
public switched - data flows over a public switched
network.
underground cable - data transmitted over a secure
underground cable.
secure conduit - line is secure conduit that is not
guarded.
guarded conduit - conduit that is protected against
physical tapping.
encrypted - encryption over the line.
guarded radiation - line is proected against physical
and radiation tapping. "
::= { nwAppnFwdLsEntry 20 }
nwAppnFwdLsPropDelay OBJECT-TYPE
SYNTAX INTEGER {
minimum(0), --X'00'
negligible(384), --X'4C'
terrestrial(9216), --X'71'
packetswitched(147456), --X'91'
long(294912), --X'99'
maximum(2013265920) --X'FF'
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the propagation delay which represents the relative
time it takes for a signal to travel the length of the link in
microseconds, with some of the more common default values
enumerated. The default times in parentheses are in microseconds.
These default values fall into the following ranges:
minimum - no propagation delay
negligible, lan - less than 480 microseconds
terrestrial, telephone - between 480 and 49,512
microseconds
packetswitched - between 49,512 and 245,760
microseconds
long, satellite - more than 245760 microseconds.
maximum - the maximum propagation delay. "
::= { nwAppnFwdLsEntry 21 }
nwAppnFwdLsUsrDef1 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies user defined parameter 1. "
DEFVAL { 128 }
::= { nwAppnFwdLsEntry 22 }
nwAppnFwdLsUsrDef2 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies user defined parameter 2. "
DEFVAL { 128 }
::= { nwAppnFwdLsEntry 23 }
nwAppnFwdLsUsrDef3 OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies user defined parameter 3. "
DEFVAL { 128 }
::= { nwAppnFwdLsEntry 24 }
nwAppnFwdLsTrgtPacingCount OBJECT-TYPE
SYNTAX INTEGER (0..32767)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Species the desired pacing window size for BINDs on this
transmission group. The number is a value between 0 and 32767
and is significant only when fixed bind pacing is being used."
DEFVAL { 7 }
::= { nwAppnFwdLsEntry 25 }
nwAppnFwdLsMaxSendBtu OBJECT-TYPE
SYNTAX INTEGER (99..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies maximum Message Unit (MU) size that can be sent."
DEFVAL { 2048 }
::= { nwAppnFwdLsEntry 26 }
nwAppnFwdLsNumActiveSession OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies total number of active sessions on this link.
This includes both end point sessions and intermediate sessions."
::= { nwAppnFwdLsEntry 27 }
nwAppnFwdLsdynamicLs OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether this link station was dynamically
allocated (yes(1)) or whether the link station was defined by
the user (no(2))."
::= { nwAppnFwdLsEntry 28 }
nwAppnFwdLsStopType OBJECT-TYPE
SYNTAX INTEGER {
immediate(1),
orderly(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the type of shutdown for a link. Once selected,
set disable in nwAppnFwdIfAdminStatus. The shutdown choices are
as follows:
immediate(1) causes the link station to disconnect
immediately without flushing remaining Message Unit (MU)s.
orderly(2) causes the link station to disconnect
after successfully flushing remaining Message Unit (MU)s. "
DEFVAL { orderly }
::= { nwAppnFwdLsEntry 29 }
nwAppnFwdLsPortNbr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This link station port number corresponds to the index into
the nwAppnFwdIfTable and the nwAppnExtensionTable, which
together describe the port used by APPN Routing Services."
::= { nwAppnFwdLsEntry 30 }
nwAppnFwdLsDestAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the destination address of the adjacent link station
depending on the media type. For token ring or ethernet ports,
the information is the 6 byte Destination MAC Address which
starts in byte 1 and ends in byte 6. For token ring ports,
the MAC address must be specified in non-canonical format.
For ethernet ports the MAC address must be specified in
canonical format. For frame relay, the address is a non-null
terminated string which is the ascii representation of the DLCI."
::= { nwAppnFwdLsEntry 31 }
nwAppnFwdLsDsap OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For a token ring or ethernet network, specifies the destination
SAP address associated with the adjacent link station. "
DEFVAL { '04'h }
::= { nwAppnFwdLsEntry 32 }
nwAppnFwdLsBlockNum OBJECT-TYPE
SYNTAX DisplayString (SIZE(3))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This represents the 3 hexadecimal digit block number which
precedes the 5 digit id number in the 8 digit node id of the
adjacent node. The node id is used in XIDs and Alerts. The
block number identifies the product type. Both the block number
and id number combined, uniquely identify the adjacent node
within the installation network."
::= { nwAppnFwdLsEntry 33 }
nwAppnFwdLsIdNum OBJECT-TYPE
SYNTAX DisplayString (SIZE(5))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This represents the 5 hexadecimal digit id number which follows
the 3 digit block number in the 8 digit node id of the adjacent
node. The node id is used in XIDs and Alerts. The id number
uniquely identifies the adjacent node within a product type
indicated by its block number. Both the block number and id number
combined, uniquely identify the adjacent node within the
installation network."
::= { nwAppnFwdLsEntry 34 }
-- APPN Forwarding Link Station Counter Table
-- APPN Forwarding link station Counter Table
-- This table contains the objects that specify Basic Link Unit (BLU) and
-- byte counters for each configured adjacent link station.
--
nwAppnFwdLsCtrTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAppnFwdLsCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the Basic Link Unit (BLU) and byte
counters for each configured adjacent link station."
::= { nwAppnFwdLsCounters 1 }
nwAppnFwdLsCtrEntry OBJECT-TYPE
SYNTAX NwAppnFwdLsCtrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry indicates the Basic Link Unit (BLU) and byte
count for the configured adjacent link station for which the
entry exists. "
INDEX { nwAppnFwdLsCtrLsName }
::= { nwAppnFwdLsCtrTable 1 }
NwAppnFwdLsCtrEntry ::=
SEQUENCE {
nwAppnFwdLsCtrLsName DisplayString,
nwAppnFwdLsCtrAdminStatus INTEGER,
nwAppnFwdLsCtrReset INTEGER,
nwAppnFwdLsCtrOperationalTime TimeTicks,
nwAppnFwdLsCtrInBlus Counter,
nwAppnFwdLsCtrOutBlus Counter,
nwAppnFwdLsCtrFwdBlus Counter,
nwAppnFwdLsCtrFilteredBlus Counter,
nwAppnFwdLsCtrDiscardBlus Counter,
nwAppnFwdLsCtrAddrErrBlus Counter,
nwAppnFwdLsCtrLenErrBlus Counter,
nwAppnFwdLsCtrHdrErrBlus Counter,
nwAppnFwdLsCtrInBytes Counter,
nwAppnFwdLsCtrOutBytes Counter,
nwAppnFwdLsCtrFwdBytes Counter,
nwAppnFwdLsCtrFilteredBytes Counter,
nwAppnFwdLsCtrDiscardBytes Counter,
nwAppnFwdLsCtrHostInBlus Counter,
nwAppnFwdLsCtrHostOutBlus Counter,
nwAppnFwdLsCtrHostDiscardBlus Counter,
nwAppnFwdLsCtrHostInBytes Counter,
nwAppnFwdLsCtrHostOutBytes Counter,
nwAppnFwdLsCtrHostDiscardBytes Counter
}
nwAppnFwdLsCtrLsName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the primary index into the link station
counter table. This index is the link station name. "
::= { nwAppnFwdLsCtrEntry 1 }
nwAppnFwdLsCtrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the administrative state of the Basic Link Unit (BLU)
and byte counters on the link for which this entry exists.
enabled(3) causes these counters to reset and become active.
disabled(2) causes these counters to become inactive. "
::= { nwAppnFwdLsCtrEntry 2 }
nwAppnFwdLsCtrReset OBJECT-TYPE
SYNTAX INTEGER {
other(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Resets the Basic Link Unit (BLU) and byte counters on the link
for which this entry exists. reset(2) resets the counters to 0.
nwAppnFwdLsCtrOperationalTime is also reset to 0."
::= { nwAppnFwdLsCtrEntry 3 }
nwAppnFwdLsCtrOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the amount of time in hundreths of a second that the
Basic Link Unit (BLU) and byte counters have been active on the
link for which this entry exists."
::= { nwAppnFwdLsCtrEntry 4 }
nwAppnFwdLsCtrInBlus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the total number of Basic Link Unit (BLU)s that have
been received, during nwAppnFwdLsCtrOperationaltime, on the link
for which this entry exists. This includes both information
(I-frame) and XID BLUs."
::= { nwAppnFwdLsCtrEntry 5 }
nwAppnFwdLsCtrOutBlus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the total number of Basic Link Unit (BLU)s that have
been transmitted, during nwAppnFwdLsCtrOperationalTime, on the
link for which this entry exists. This includes both information
(I-frame) and XID BLUs."
::= { nwAppnFwdLsCtrEntry 6 }
nwAppnFwdLsCtrFwdBlus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 7 }
nwAppnFwdLsCtrFilteredBlus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 8 }
nwAppnFwdLsCtrDiscardBlus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 9 }
nwAppnFwdLsCtrAddrErrBlus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 10 }
nwAppnFwdLsCtrLenErrBlus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the total number of received Basic Link Unit (BLU)s
during nwAppnFwdLsCtrOperationalTime which have invalid DLC
headers on the link for which this entry exists."
::= { nwAppnFwdLsCtrEntry 11 }
nwAppnFwdLsCtrHdrErrBlus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the total number of received Basic Link Unit (BLU)s
during nwAppnFwdLsCtrOperationalTime which have length errors
on the link for which this entry exists."
::= { nwAppnFwdLsCtrEntry 12 }
nwAppnFwdLsCtrInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the total number of bytes that have been received,
during nwAppnFwdLsCtrOperationalTime, on the link for which
the entry exists. This includes bytes contained in
information (I-frames) and XID BLUs."
::= { nwAppnFwdLsCtrEntry 13 }
nwAppnFwdLsCtrOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the total number of bytes that have been transmitted,
during nwAppnFwdLsCtrOperationalTime, on the link for which the
entry exists. This includes bytes contained in information
(I-frames) and XID BLUs."
::= { nwAppnFwdLsCtrEntry 14 }
nwAppnFwdLsCtrFwdBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 15 }
nwAppnFwdLsCtrFilteredBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 16 }
nwAppnFwdLsCtrDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 17 }
nwAppnFwdLsCtrHostInBlus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 18 }
nwAppnFwdLsCtrHostOutBlus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 19 }
nwAppnFwdLsCtrHostDiscardBlus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 20 }
nwAppnFwdLsCtrHostInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 21 }
nwAppnFwdLsCtrHostOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 22 }
nwAppnFwdLsCtrHostDiscardBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnFwdLsCtrEntry 23 }
-- Link State-Based Protocols
-- This group contains the managed objects for Link State protocols for
-- APPN Routing Services.
-- APPN ISR System Group
-- This group contains the managed objects for global, system-wide
-- APPN Intermediate Session Routing (ISR) LinkState based routing protocol.
-- APPN ISR System Configuration Parameters
-- This group contains the objects that pertain to the setup and
-- configuration of the APPN ISR LinkState based routing protocol.
-- Link State-Based Protocols
-- This group contains the objects that apply to the Link State based routing
-- protocols supported by APPN Routing Services.
-- APPN ISR System Group
-- This group contains the objects that pertain to the APPN Intermediate Session
-- Routing (ISR) LinkState-based routing protocol at a system-wide, global level.
-- APPN ISR System Configuration Parameters
-- This group contains the objects that pertain to the setup and configuration
-- of the APPN ISR Link State based routing protocol at a system-wide, global level.
nwAppnIsrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disable(2), -- disable
enable(3) -- enable
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Intermediate Session Routing cannot be turned on and
off. Any modifications to this leaf will have no
affect. "
::= { nwAppnIsrConfig 1 }
nwAppnIsrOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
disabled(2), -- inactive
enabled(3), -- active
pendingDisable(4), -- deactivate in progress
pendingEnable(5) -- activate in progress
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the current operating condition of the ISR routing
protocol, system-wide."
::= { nwAppnIsrConfig 2 }
nwAppnIsrAdminReset OBJECT-TYPE
SYNTAX INTEGER {
other(1) -- none of the following
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object does not apply to this protocol. It is a common
object, inherited from the MIB framework used to provide a
common management interface to all the Cabletron Routing Services
protocol-specific MIBs."
::= { nwAppnIsrConfig 3 }
nwAppnIsrOperationalTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the elapsed time, in hundredths of a second, that
nwAppnOperStatus has been in its current state."
::= { nwAppnIsrConfig 4 }
nwAppnIsrVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the current revision level of the ISR firmware in
textual format. This is the same version number as that of APPN
Routing Services firmware, nwAppnSysVersion. "
::= { nwAppnIsrConfig 5 }
-- APPN Event Group
nwAppnEventAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Set the administrative state of APPN Routing Services event
logging. enabled(3) causes the event log to become active.
disabled(2) causes the event log to become inactive."
::= { nwAppnEventLogConfig 1 }
nwAppnEventMaxEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Sets the maximum number of entries allowed in the event log
table. When the number of entries reaches the value of
nwAppnEventMaxEntries the first (oldest) entry is deleted
to allow a new entry to be added."
::= { nwAppnEventLogConfig 2 }
nwAppnEventTraceAll OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disabled(2),
enabled(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enabled(3) allows logging of all event types on all ports.
disabled(2) causes the filter table to specify which events to
log."
::= { nwAppnEventLogConfig 3 }
-- Event Log Filter Table
-- The Event Log Filter Table contains the managed objects used to setup
-- and configure event log filters for APPN Routing Services events.
nwAppnEventFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAppnEventFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains descriptions of how to filter log entries."
::= { nwAppnEventLogFilterTable 1 }
nwAppnEventFilterEntry OBJECT-TYPE
SYNTAX NwAppnEventFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies the filter for log entries. The
instance nwAppnEventProtocol refers to the instance used
in the nwRtgProtocolTable and nwComponentTable specified
by the ctrouter-mib.txt. "
INDEX { nwAppnEventFltrProtocol, nwAppnEventFltrIfNum }
::= { nwAppnEventFilterTable 1 }
NwAppnEventFilterEntry ::=
SEQUENCE {
nwAppnEventFltrProtocol INTEGER,
nwAppnEventFltrIfNum INTEGER,
nwAppnEventFltrControl INTEGER,
nwAppnEventFltrType INTEGER,
nwAppnEventFltrSeverity INTEGER,
nwAppnEventFltrAction INTEGER
}
nwAppnEventFltrProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Selects the protocol to log events from."
::= { nwAppnEventFilterEntry 1 }
nwAppnEventFltrIfNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the APPN Routing Services port on which to log events. "
::= { nwAppnEventFilterEntry 2 }
nwAppnEventFltrControl OBJECT-TYPE
SYNTAX INTEGER {
other(1),
delete(2),
add(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this field to delete will allow entries to be
removed from the table. This is done by adding new entries
with instance fields that match the entry to be removed from
the table. The new entry being added must have this control
field set to delete in order for the matching entry already
in the table to be deleted. Setting this field to add will
add the entry to the table."
::= { nwAppnEventFilterEntry 3 }
nwAppnEventFltrType OBJECT-TYPE
SYNTAX INTEGER {
misc(1),
timer(2),
rcv(4),
xmit(8),
event(16),
error(32)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This bit field mask filter will allow only events of
certain types to be logged. By default all types will be
logged. Clearing event types from this field will cause
those types not to be logged. Adding event types to this
field will enable those types to be logged. "
::= { nwAppnEventFilterEntry 4 }
nwAppnEventFltrSeverity OBJECT-TYPE
SYNTAX INTEGER {
highest(1),
highmed(2),
highlow(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This filter controls the amount of logging by ignoring events
of lower priority than that specified by the filter value.
Specifying highest(1) causes all events except those of highest
severity to be ignored. Specifying highmed(2) causes lowest
severity events to be ignored. Specifying highlow(3) causes
all events to be logged. highmed(2) is the default setting."
::= { nwAppnEventFilterEntry 5 }
nwAppnEventFltrAction OBJECT-TYPE
SYNTAX INTEGER {
log(1),
trap(2),
logTrap(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field specifies how the events are to be logged.
Specifying log(1) stores the events in the event log
table (defined below). Specifying trap(2) sends events
out through the trap mechanism. Specifying logTrap(3)
does both. "
::= { nwAppnEventFilterEntry 6 }
-- Event Log Table
-- The Event Log Table contains the logged events.
nwAppnEventTable OBJECT-TYPE
SYNTAX SEQUENCE OF NwAppnEventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains all events that have been logged."
::= { nwAppnEventLogTable 1 }
nwAppnEventEntry OBJECT-TYPE
SYNTAX NwAppnEventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry specifies events that have been logged."
INDEX { nwAppnEventNumber }
::= { nwAppnEventTable 1 }
NwAppnEventEntry ::=
SEQUENCE {
nwAppnEventNumber INTEGER,
nwAppnEventTime TimeTicks,
nwAppnEventType INTEGER,
nwAppnEventSeverity INTEGER,
nwAppnEventProtocol INTEGER,
nwAppnEventIfNum INTEGER,
nwAppnEventTextString OCTET STRING
}
nwAppnEventNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This ordinal number uniquely identifies events."
::= { nwAppnEventEntry 1 }
nwAppnEventTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This number specifies when the event was logged."
::= { nwAppnEventEntry 2 }
nwAppnEventType OBJECT-TYPE
SYNTAX INTEGER {
misc(1),
timer(2),
rcv(4),
xmit(8),
event(16),
diags(32),
error(64)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies type of event logged."
::= { nwAppnEventEntry 3 }
nwAppnEventSeverity OBJECT-TYPE
SYNTAX INTEGER {
highest(1),
highmed(2),
highlow(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the severity of the event logged."
::= { nwAppnEventEntry 4 }
nwAppnEventProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the protocol where the event occured."
::= { nwAppnEventEntry 5 }
nwAppnEventIfNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the APPN Routing Services port the event occurred on."
::= { nwAppnEventEntry 6 }
nwAppnEventTextString OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the actual text string to be logged."
::= { nwAppnEventEntry 7 }
END