mibs/MIBS/enterasys/CTRON-ETWMIM-MIB

172 lines
7.2 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
CTRON-ETWMIM-MIB DEFINITIONS ::= BEGIN
-- ETWMIM-MIB
-- Revision: 0.02.00
-- Part Number: 2170991
-- Date: August 14, 1995
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for part
-- of the naming tree below:
--
-- cabletron { enterprises 52 }
--
-- This module will be extended, as additional sub-sections
-- of this naming tree are defined.
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright August 95 Cabletron Systems
--
--
IMPORTS
OBJECT-TYPE FROM RFC-1212
ctPModuleETWMIM FROM CTRON-MIB-NAMES;
etwDbExist OBJECT-TYPE
SYNTAX INTEGER {
exists(1),
no-exists(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Denotes whether a T1 daughter board is attached to the
Etwmim card being managed"
::= { ctPModuleETWMIM 1 }
etwDbEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object exists if etwDbExist is 1. Setting
this object to 1 will cause the WAN port to use the
daughterboard T1 port. Setting this object to 2
will cause the WAN port to use the synchronous port"
::= { ctPModuleETWMIM 2 }
etwDbFracToggle OBJECT-TYPE
SYNTAX INTEGER {
update-table(1),
display-new(2),
display-old(3),
restore-old(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object exists if etwDbExist is 1. Setting this
object to 1 will cause the T1 fractional table to be
updated with the new values, as entered. Setting this
object to 2, will cause the T1 fractional table to be
the table as it is being entered. Setting this object
to 3, will cause the T1 fractional table to be the
table that is currently in use, regardless of any
changes being entered. Setting this object to 4, will
cause any changes that have been made to the fractional
table since the last update-table to be deleted."
REFERENCE
"IETF RFC 1232"
::= { ctPModuleETWMIM 3 }
etwFWRev OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Denotes the revision of firmware in the module.
The format of the string is xx.xx.xx, where the first
pair indicates version, and the second pair indicates
revision."
::= { ctPModuleETWMIM 4 }
etwHWRev OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Denotes the revision of hardware."
::= { ctPModuleETWMIM 5 }
etwEpimEnabled OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the status of the EPIM port on the
etwmim. A value of 1 indicates that the hardware has
been set to use the Epim port for the ethernet
connection. A value of 2 indicates that the hardware
has been set to use the A channel for the ethernet
connection"
::= { ctPModuleETWMIM 6 }
etwEpimType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the type of EPIM that is present in the
EPIM slot. The value is allocated in the Ctron naming
tree."
::= { ctPModuleETWMIM 7 }
etwEpimLink OBJECT-TYPE
SYNTAX INTEGER {
link-established(1),
link-not-established(2),
link-unknown(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object will indicate whether a link is
established on the EPIM link. A value of 1 indicates
that a link is established. A value of 2 indicates that
a link is not established. A value of 3 indicates that
the status of the link is unknown or not valid for the
type of Epim installed."
::= { ctPModuleETWMIM 8 }
etwClearNvramOnBoot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When set to a 1, the system will clear all persistant
objects, except for the download objects, from nvram
on the next system boot"
::= { ctPModuleETWMIM 9 }
END