mibs/MIBS/enterasys/CTRON-SFPS-CALL-MIB

661 lines
21 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
CTRON-SFPS-CALL-MIB DEFINITIONS ::= BEGIN
-- sfps-call-mib.txt
-- Revision: 0.0.16
--
-- Part Number:
-- Date: August 9, 1994
-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-0505
-- (603) 332-9400
-- support@ctron.com
-- This module provides authoritative definitions for Cabletron's
-- enterprise specific Fast Packet Switching Services MIB.
--
-- This module will be extended, as required.
--
-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice. The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.
-- Copyright October 93 Cabletron Systems
--
IMPORTS
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
-- enterprises,
-- IpAddress,
-- Counter, Gauge,
TimeTicks
FROM RFC1155-SMI
-- These Objects are defined in the file sfps-inc.mib.txt.0.0.2
sfpsSap, sfpsSapAPI, sfpsCallByTuple, sfpsCallTableStats
FROM CTRON-SFPS-INCLUDE-MIB;
-- Textual Conventions
HexInteger ::= INTEGER
-- display this integer in hex format
--
-- SFPS Switch Agent Redirector Group
-- This group contains the objects that pertain to the SFPS Redirector.
-- This object receives redirected packets from the switch engine and
-- forwards them to the appropriate call processor stack.
sfpsSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpsSapTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the registered (active) call processors
indexed (indirectly) by address and address type supported."
::= { sfpsSap 1 }
sfpsSapTableEntry OBJECT-TYPE
SYNTAX SfpsSapTableEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains information pertaining to an active
call processor."
INDEX { sfpsSapTableTag, sfpsSapTableHash, sfpsSapTableHashIndex }
::= { sfpsSapTable 1 }
SfpsSapTableEntry ::=
SEQUENCE {
sfpsSapTableTag INTEGER,
sfpsSapTableHash INTEGER,
sfpsSapTableHashIndex INTEGER,
sfpsSapTableSourceCP DisplayString,
sfpsSapTableDestCP DisplayString,
sfpsSapTableSAP DisplayString,
sfpsSapTableOperStatus INTEGER,
sfpsSapTableAdminStatus INTEGER,
sfpsSapTableStateTime TimeTicks,
sfpsSapTableDescription DisplayString,
sfpsSapTableNumAccepted INTEGER,
sfpsSapTableNumDropped INTEGER,
sfpsSapTableUnicastSap INTEGER,
sfpsSapTableNVStatus INTEGER
}
sfpsSapTableTag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A type tag used to sort and index the table entries."
::= { sfpsSapTableEntry 1 }
sfpsSapTableHash OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A hash of the sfpsSapTableAddress used to identify the
instance."
::= { sfpsSapTableEntry 2 }
sfpsSapTableHashIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A count of the non-unique sfpsSapTableAddress hashes used to
identify the instance."
::= { sfpsSapTableEntry 3 }
sfpsSapTableSourceCP OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the call processor initiating the the SAP attempts
for this particular SAP load."
::= { sfpsSapTableEntry 4 }
sfpsSapTableDestCP OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination call processor that is registered for with this
source call processor for the given SAP load."
::= { sfpsSapTableEntry 5 }
sfpsSapTableSAP OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the SAP in 0x format."
::= { sfpsSapTableEntry 6 }
sfpsSapTableOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the Current OperStatus of the SAP entry."
::= { sfpsSapTableEntry 7 }
sfpsSapTableAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the Current AdminStatus of the SAP entry."
::= { sfpsSapTableEntry 8 }
sfpsSapTableStateTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of SFPSElements stored in NVRAM for persistence."
::= { sfpsSapTableEntry 9 }
sfpsSapTableDescription OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Text description of the entry."
::= { sfpsSapTableEntry 10 }
sfpsSapTableNumAccepted OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number accepted by the SAP."
::= { sfpsSapTableEntry 11 }
sfpsSapTableNumDropped OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number dropped by the SAP."
::= { sfpsSapTableEntry 12 }
sfpsSapTableUnicastSap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
""
::= { sfpsSapTableEntry 13 }
sfpsSapTableNVStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3),
unset(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status in NVRAM for persistence."
::= { sfpsSapTableEntry 14 }
-- SAP Table API
sfpsSapAPIVerb OBJECT-TYPE
SYNTAX INTEGER {
getStatus(1),
next(2),
first(3),
disable(4),
disableInNvram(5),
enable(6),
enableInNvram(7),
clearFromNvram(8),
clearAllNvram(9),
resetStats(10),
resetAllStats(11)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"1 - getStatus -- The default verb. When the SourceCP, DestCP,
and SAP info are entered, this action will get the current
AdminStatus, OperStatus, and NvramStatus.
(Must perform a mo_get after setting the above info to actually
get the status info)
2 - next -- Move to the next Entry in the SAP Table and Get the
status. If this operation is successful, the verb will stay
next, else it defaults to getStatus.
3 - first -- Jump back to the First Entry in the SAP Table.
4 - disable -- Disable the Current SAP Entry.
This does not effect the Status of this Entry in Nvram.
5 - disableInNvram -- Set the Current SAP Entries status to
Disabled in Nvram - This does not effect the Current Admin
Status for this SAP Entry.
6 - enable -- Enable the Current SAP Entry.
This does not effect the Status of this Entry in Nvram.
7 - enableInNvram -- Set the Current SAP Entries status to
Enabled in Nvram - This does not effect the Current Admin
Status for this SAP Entry.
8 - clearFromNvram -- Clear the Current SAP Entry from Nvram
(if set).
9 - clearAllNvram -- Clear all SAP Entries from Nvram.
10 - resetStats -- Resets the Accepted/Dropped Stats for the
Current/Entered SAP Entry.
11 - resetAllStats -- Resets the Accepted/Dropped Stats for
all SAP Entries."
::= { sfpsSapAPI 1 }
sfpsSapAPISourceCP OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the call processor initiating the the SAP attempts
for this particular SAP load."
::= { sfpsSapAPI 2 }
sfpsSapAPIDestCP OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The destination call processor that is registered for with this
source call processor for the given SAP load."
::= { sfpsSapAPI 3 }
sfpsSapAPISAP OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enter in the SAP for the desired SAP Entry."
::= { sfpsSapAPI 4 }
sfpsSapAPINVStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3),
unset(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the Current Admin Status of this SAP Entry saved
in Nvram."
::= { sfpsSapAPI 5 }
sfpsSapAPIAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the Current AdminStatus of the SAP Entry."
::= { sfpsSapAPI 6 }
sfpsSapAPIOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Displays the Current OperStatus of the SAP Entry."
::= { sfpsSapAPI 7 }
sfpsSapAPINvSet OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of entries stored in NVRAM for persistence."
::= { sfpsSapAPI 8 }
sfpsSapAPINVTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Total number of entries allocated in NVRAM. The
switch will always allocate enough space in NVRAM for
the number of elements. That is, NvTotal will always be
greater than or equal to NvSet."
::= { sfpsSapAPI 9 }
sfpsSapAPINumAccept OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sfpsSapAPI 10 }
sfpsSapAPINvDiscard OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sfpsSapAPI 11 }
sfpsSapAPIDefaultStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
disable(2),
enable(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { sfpsSapAPI 12 }
--
-- SFPS Agent Call Processor Groups
-- SFPS Call by Tuple Group
-- This group contains the objects that pertain to call tag.
-- This group should eventually replace the Call tag table
sfpsCallByTupleTable OBJECT-TYPE
SYNTAX SEQUENCE OF SfpsCallByTupleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the call tags, and call states
indexed (indirectly) by switch tuple (in port, src
address, dst address)"
::= { sfpsCallByTuple 1 }
sfpsCallByTupleEntry OBJECT-TYPE
SYNTAX SfpsCallByTupleEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry contains information pertaining to a call tag
and its state."
INDEX { sfpsCallByTupleInPort, sfpsCallByTupleSrcHash,
sfpsCallByTupleDstHash, sfpsCallByTupleHashIndex }
::= { sfpsCallByTupleTable 1 }
SfpsCallByTupleEntry ::=
SEQUENCE {
sfpsCallByTupleInPort INTEGER,
sfpsCallByTupleSrcHash INTEGER,
sfpsCallByTupleDstHash INTEGER,
sfpsCallByTupleHashIndex INTEGER,
sfpsCallByTupleBotSrcType DisplayString,
sfpsCallByTupleBotSrcAddress DisplayString,
sfpsCallByTupleBotDstType DisplayString,
sfpsCallByTupleBotDstAddress DisplayString,
sfpsCallByTupleTopSrcType DisplayString,
sfpsCallByTupleTopSrcAddress DisplayString,
sfpsCallByTupleTopDstType DisplayString,
sfpsCallByTupleTopDstAddress DisplayString,
sfpsCallByTupleCallProcName DisplayString,
sfpsCallByTupleCallTag HexInteger,
sfpsCallByTupleCallState DisplayString,
sfpsCallByTupleTimeRemaining TimeTicks
}
sfpsCallByTupleInPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port of the switch on which the packet associated with
this call tag was seen."
::= { sfpsCallByTupleEntry 1 }
sfpsCallByTupleSrcHash OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A hash of sfpsCallByTupleBotSrcAddress used to identify the
instance."
::= { sfpsCallByTupleEntry 2 }
sfpsCallByTupleDstHash OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A hash of sfpsCallByTupleTopDstAddress used to identify the
instance."
::= { sfpsCallByTupleEntry 3 }
sfpsCallByTupleHashIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A count of non-unique sfpsCallByTupleSrcHash and
sfpsCallByTupleDstHash pairs used to identify the instance."
::= { sfpsCallByTupleEntry 4 }
sfpsCallByTupleBotSrcType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source address type of the lowest known protocol
layer."
::= { sfpsCallByTupleEntry 5 }
sfpsCallByTupleBotSrcAddress OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source address value of the lowest known protocol
layer."
::= { sfpsCallByTupleEntry 6 }
sfpsCallByTupleBotDstType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination address type of the lowest known
protocol layer."
::= { sfpsCallByTupleEntry 7 }
sfpsCallByTupleBotDstAddress OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination address value of the lowest known
protocol layer."
::= { sfpsCallByTupleEntry 8 }
sfpsCallByTupleTopSrcType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source address type of the highest learned protocol
layer."
::= { sfpsCallByTupleEntry 9 }
sfpsCallByTupleTopSrcAddress OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The source address value of the highest learned protocol
layer."
::= { sfpsCallByTupleEntry 10 }
sfpsCallByTupleTopDstType OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination address type of the highest learned
protocol layer."
::= { sfpsCallByTupleEntry 11 }
sfpsCallByTupleTopDstAddress OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The destination address value of the highest learned
protocol layer."
::= { sfpsCallByTupleEntry 12 }
sfpsCallByTupleCallProcName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the call processor responsible for all
signaling for this packet/call tag."
::= { sfpsCallByTupleEntry 13 }
sfpsCallByTupleCallTag OBJECT-TYPE
SYNTAX HexInteger
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number used to reference this packet and its
associated calls."
::= { sfpsCallByTupleEntry 14 }
sfpsCallByTupleCallState OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the packet in the call processor."
::= { sfpsCallByTupleEntry 15 }
sfpsCallByTupleTimeRemaining OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of time ticks remaining before this entry's
timer expires and it is removed from the table."
::= { sfpsCallByTupleEntry 16 }
sfpsCallTableStatsRam OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes used by the Call Table."
::= { sfpsCallTableStats 1 }
sfpsCallTableStatsSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of entries in the Call Table."
::= { sfpsCallTableStats 2 }
sfpsCallTableStatsInUse OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of calls in use. A call goes into this
table only if it is being blocked (waiting for resolve or
sent new user)."
::= { sfpsCallTableStats 3 }
sfpsCallTableStatsMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of calls that the switch maintained."
::= { sfpsCallTableStats 4 }
sfpsCallTableStatsTotMisses OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times that there were no calls available
in the Call Table. This would be the number of calls that
had to be dropped."
::= { sfpsCallTableStats 5 }
sfpsCallTableStatsMissStart OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time when last miss occurred"
::= { sfpsCallTableStats 7 }
sfpsCallTableStatsMissStop OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time when missing stopped"
::= { sfpsCallTableStats 8 }
sfpsCallTableStatsLastMiss OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of calls dropped in last miss, also write 0 to files"
::= { sfpsCallTableStats 9 }
END