mibs/MIBS/ewc/HIPATH-WIRELESS-HWC-MIB

16048 lines
564 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
HIPATH-WIRELESS-HWC-MIB DEFINITIONS ::= BEGIN
IMPORTS
hiPathWirelessMgmt, hiPathWirelessModules
FROM HIPATH-WIRELESS-SMI
WEPKeytype
FROM IEEE802dot11-MIB
Ipv6Address
FROM IPV6-TC
ifIndex, InterfaceIndex
FROM IF-MIB
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
TimeTicks, IpAddress, Integer32, Unsigned32, Gauge32,
Counter32, Counter64, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString, TruthValue, RowStatus, MacAddress, TEXTUAL-CONVENTION
FROM SNMPv2-TC;
-- 1.3.6.1.4.1.4329.15.5.2
hiPathWirelessControllerMib MODULE-IDENTITY
LAST-UPDATED "201604131355Z" -- Wednesday April 13 13:55 UTC 2016
ORGANIZATION
"Chantry Networks Inc."
CONTACT-INFO
"Chantry Networks, Inc.
55 Commerce Valley Drive (W), Suite 400
Thornhill, Ontario L3T 7V9, Canada
Phone: 1-289-695-3182
Fax: 1 289-695-3299"
DESCRIPTION
"The access controller MIB"
REVISION "201604131355Z" -- Wednesday April 13 13:55 UTC 2016
DESCRIPTION
"
- Added wlanAppVisibility to wlanTable."
REVISION "201603091641Z" -- Wednesday March 09 16:41 UTC 2016
DESCRIPTION
"
- Added stationIPv6Address1, stationIPv6Address2, and stationIPv6Address3
to stationEventAlarm.
- Added apTotalStationsAInOctets, apTotalStationsAOutOctets, apTotalStationsBInOctets,
apTotalStationsBOutOctets, apTotalStationsGInOctets, apTotalStationsGOutOctets,
apTotalStationsN50InOctets, apTotalStationsN50OutOctets, apTotalStationsN24InOctets,
apTotalStationsN24OutOctets, apTotalStationsACInOctets, and apTotalStationsACOutOctets
to apStatsTable."
REVISION "201510061731Z" -- Tuesday October 06 17:31 UTC 2015
DESCRIPTION
"
- Modified the description of stationEventTimeStamp.
- Added more access points (APs) to apPlatforms.
- Deprecated topoWireStatTable.
- Added topoCompleteStatTable.
- Added applyMacAddressFormat to authenticationAdvanced.
- Added radiusMacAddressFormatOption to vnsGlobalSetting."
REVISION "201506121205Z" -- Friday Jun 12 12:05 UTC 2015
DESCRIPTION
"
- Modified the description of topoStatTable.
- Modified the description of apPerformanceReportByRadioTable."
REVISION "201503171031Z" -- Tuesday March 17 10:31 UTC 2015
DESCRIPTION
"
- Added wlanRadioManagement11k, wlanBeaconReport, QuietIE,
wlanMirrorN, and wlanNetFlow to wlanTable.
- Added wlanPrivfastTransition, and wlanPrivManagementFrameProtection to wlanPrivTable.
- Added topologyIsGroup, topologyGroupMembers, and topologyMemberId to topologyTable.
- Added netflowAndMirrorN Object. It contains netflowDestinationIP, netflowInterval,
mirrorFirstN, and mirrorL2Ports.
- Added fastTransition(13) to muDot11ConnectionCapability.
- Added clearAccessRejectMsg and accessRejectMsgTable.
- Added vnsQoSWirelessUseAdmControlBestEffort, and
vnsQoSWirelessUseAdmControlBackground to vnsQoSTable.
- Added maxBestEffortBWforReassociation, maxBestEffortBWforAssociation,
maxBackgroundBWforReassociation, and maxBackgroundBWforAssociation
to wirelessQoS.
- Added radacctStartOnIPAddr and clientServiceTypeLogin to authenticationAdvanced.
- Added apPerformanceReportByRadioTable.
- Added apPerformanceReportbyRadioAndWlanTable.
- Added apChannelUtilizationTable.
- Added apAccessibilityTable.
- Added apNeighboursTable."
REVISION "201411281731Z" -- Friday November 28 17:31 UTC 2014
DESCRIPTION
"- Added topoWireStatTable."
REVISION "201406171529Z" -- Tuesday June 17 15:29 UTC 2014
DESCRIPTION
"- Added firewallFriendlyExCP(7) to wlanAuthType.
- Added firewallFriendlyExCP(7) to wlanCPAuthType.
- Added wlanCPIdentity, wlanCPCustomSpecificURL and
wlanCPSelectionOption to wlanCPTable.
- Added wlanAuthRadiusOperatorNameSpace, wlanAuthRadiusOperatorName and
wlanAuthMACBasedAuthReAuthOnAreaRoam to wlanAuthTable.
- Added radiusExtnsSettingTable.
- Added authenticationAdvanced.
- Added areaChange(12) to stationEventType."
REVISION "201404161429Z" -- Wednesday April 16 14:29 UTC 2014
DESCRIPTION
"- Added apLogManagement Objects.
- Added apMaintenanceCycle Objects.
- Deprecated wlanCPExtTosValue from wlanCPTable.
- Deprecated apSSHAccess from apTable.
- Added apSSHConnection to apTable.
- Added na(3) to apTelnetAccess."
REVISION "201401271429Z" -- Monday January 27 14:29 UTC 2014
DESCRIPTION
"- Added apRadioAttenuation to apRadioAntennaTable.
- Added apRadioStatusTable.
- Added apRadioProtocol to apRadioTable.
- Deprecated apRadioType from apRadioTable."
REVISION "201311181029Z" -- Monday November 18 10:29 UTC 2013
DESCRIPTION
"- stationsByProtocol was modified to add stationsByProtocolUnavailable, stationsByProtocolError and stationsByProtocolAC.
- Added muDot11ConnectionCapability to muTable.
- deprecated muConnectionCapability from muTable.
- Added ac(6) to muConnectionProtoco.
- Added apInterfaceMTU, apEffectiveTunnelMTU and apTotalStationsAC to apStatsTable.
- Added dot11ac(11) and dot11cStrict(12) to apRadioType.
- Added wlanAuthRadiusAcctAfterMacBaseAuthorization and wlanAuthRadiusTimeoutRole to wlanAuthTable.
- Added wlanPrivWPAversion to wlanPrivTable.
- Added jumboFrames to physicalPortObjects.
- Added apRegister to apEventId."
REVISION "201308281117Z" -- Wednesday August 28 11:17 UTC 2013
DESCRIPTION
"- apTable was modified to add apIPMulticastAssembly."
REVISION "201308011555Z" -- Thu August 1 15:55 UTC 2013
DESCRIPTION
"
- Added wlanCPUseHTTPSforConnection to wlanCPTable.
- Added wlanRadiusServerTable.
- Added inSrvScanGrpDetectRogueAP and inSrvScanGrpListeningPort to inServiceScanGroupTable.
- Added dedicatedScanGrpDetectRogueAP and dedicatedScanGrpListeningPort to dedicatedScanGroupTable.
- Added clientAutologinOption to vnsGlobalSetting.
- Added licenseMode, licenseLocalAP, licenseForeignAP, licenseLocalRadarAP and licenseForeignRadarAP to licensingInformation.
- Added sysCPUType to systemObjects.
- Added adHocModeDevice(6) and rogueAP(7) to dedicatedScanGrpCounterMeasures and inServiceScanGroupTable ."
REVISION "201307121650Z" -- Friday July 12 16:50 UTC 2013
DESCRIPTION
"- Added AccessPoint reigisteration event notification."
REVISION "201304181555Z" -- Thu Apr 18 15:55 UTC 2013
DESCRIPTION
"- Added radiusFastFailoverEventsTable.
- Addes dhcpRelayListenersTable.
- topologyTable was modified to add new topologyDynamicEgress value..
- Added apRadioAntennaTable.
- Added stationSessionNotifications trap.
- scanGroupAPAssignmentTable was modified to add
scanGroupAPAssignControllerIPAddress and scanGroupAPAssignFordwardingService.
- scanAPTable was modified to add scanAPProfileName and scanAPProfileType.
- Added dedicatedScanGroupTable.
- apStatsTable was modified to add apInvalidPolicyCount.
- apTable was modified to add apSecureDataTunnelType
- uncategorizedAPTable was modified to add uncategorizedAPSSID
and deprecate uncategorizedAPDescption."
REVISION "201210181150Z" -- October 18, 2012 at 11:50 GMT
DESCRIPTION
"Description changes for object groups:
uncategorizedAPGroup, authorizedAPGroup and prohibitedAPGroup."
REVISION "201209271110Z" -- September 27, 2012 at 11:10 GMT
DESCRIPTION
"- Added radiusStrictMode
- Enhance description field of a few variables"
REVISION "201209101410Z" -- September 10, 2012 at 14:10 GMT
DESCRIPTION
"Added support:
- widsWips: Configuration and statistic infromation about intrusion detection and prevention.
- Controller dashboard information was added under 'dashboard', that includes
some controler statistics and lincensing information
- wlanSecurityReportTable was created to report on the status of weak WLAN configuration
- apAntennaTable was added to provide AP antenna information
- MU access list: creating MU access list using set of MAC addresses.
- muACLTable is deprecated and replaced by muAccessListTable.
- apTable was modified with added new field: apMICErrorWarning"
REVISION "201202131933Z" -- February 13, 2012 at 19:33 GMT
DESCRIPTION
"Added support:
- siteTable: main table to create any site.
- sitePolicyTable: The table for assigning policies to a site.
- siteCosTable: The table for retrieving assigned CoS to a site.
- siteAPTable: Table for assinging APs to a site.
- siteWlanTable: Table for assinging WLANs to a site.
All tables above can collectively be used to configure a site or retrieve its configuration values.
apTable was modified with new value for show its site membership.
- WlanAuthTable::wlanAuthReplaceCalledStationIDWithZone was added.
- WlanCpTable::wlanCPGuestMaxConcurrentSession was added.
- TopologyTable was modified with additional new elements.
- apTable was modified with new AP attributes.
- muTable::muBSSIDMac was added.
- loadGroupTable: more elements were added to this table.
- loadGroupTable::loadGroupLoadControl was deprecated and was replaced with two new fields
each representing one radio."
REVISION "201108171418Z" -- August 17, 2011 at 14:18 GMT
DESCRIPTION
"muTable was modified to show its association to WLAN by including WLAN ID into muTable."
REVISION "201106131310Z" -- June 13, 2011 at 13:10 GMT
DESCRIPTION
"secureConnection: This object was added to support weak cipher configuration.
VSN related fields were modified:
-- vnsFilterRuleDirection, vnsFilterRuleProtocol, vnsFilterRuleEtherType.
muTable was modified with added fields:
-- muTopologyName, muPolicyName, muDefaultCoS, muConnectionProtocol, muConnectionCapability.
More added for configuration of MU Access List:
- muACLType, muACLTable.
apStatsTable was modified with more new elements:
- apTotalStationsA, apTotalStationsB, apTotalStationsG,apTotalStationsN50, apTotalStationsN24."
REVISION "201104291606Z" -- April 29, 2011 at 16:06 GMT
DESCRIPTION
"Added layer two physical tables:
- layerTwoPortTable
Following tables are deprecated due to changes in EWC:
- physicalPortsTable
- phyDHCPRangeTable
HWC (HiPath Wireless Controller) has been replaced with EWC (Enterasys
Wireless Controller)."
REVISION "201101131325Z" -- January 13, 2011 at 13:25 GMT
DESCRIPTION
"Added more tables to reflect WLAN configuration. Detailed WLAN configuration
are reflected in new tables:
- wlanPrivTable (WLAN privacy configuration)
- wlanAuthTable (WLAN authentication configuration)
- wlanRadiusTable (RADIUS assignment for each WLAN)
- wlanCPTable (WLAN captive portal configuration)
- wlanServiceType field was modifed to support mesh.
Acess point related changes are:
- apStaticMTUSize to apTable
- apRadioNumber to apRadioTable
- apRadioType to apRadioTable
Global advanced filtering mode were added: advancedFilteringMode
Following item were not applicable to HWC captive portal anymore and are deprecated:
- cpLoginLabel
- cpPasswordLabel
- cpHeaderURL
- cpFooterURL
- cpMessage
Access point load balancing group are reflected in new tables:
- loadGroupTable (load group configuration)
- loadGrpRadiosTable (radio assignment to loadGroupTable)
- loadGrpWlanTable (WLAN assignment to loadGroupTable) "
REVISION "201004291744Z" -- April 29, 2010 at 17:44 GMT
DESCRIPTION
"HWC release 7.31: Enhancement are in the area of:
- availability: HWC availability support
- vnManagerObjects: Mobility enhancement related to MU counters
- tunnelStatsTable: Mobility tunnel stats enhancement such as MU counters
- AP stats enhancement in apStatsTable
- apRegistration: AP registration and administration configuration fields
- topologyTable: Advanced topology configuration fields are added to this table.
- topoStatTable: topoStatFrameChkSeqErrors and topoStatFrameTooLongErrors added
- WLAN scalars added: wlanMaxEntries, wlanNumEntries, wlanTableNextAvailableIndex
- wlanTable: Table of WLAN configuration
- wlanStatsTable: WLAN statistics such as clients counts, RADIUS
request counts, RAIDUS failed or rejected counters. "
REVISION "201004081645Z" -- April 08, 2010 at 16:45 GMT
DESCRIPTION
"Obsoleted following items:
- vnsAssignmentMode
- vnsParentIfIndex
- vnsRateControlProfTable
- vnsWDSStatTable
- vnsStatTable. These stats are reflected under topology
- vnsExceptionStatTable. These stats are reflected under topology."
REVISION "201002231517Z" -- February 23, 2010 at 15:17 GMT
DESCRIPTION
"New changes include:
- Topology configuratioin
- Statistics about topoloy
- Exception stat about topology."
REVISION "200908181200Z" -- August 18, 2009 at 12:00 GMT
DESCRIPTION
"Added version of the image for sensors."
REVISION "200907231247Z" -- July 23, 2009 at 12:47 GMT
DESCRIPTION
"Added SLP status field to VNS configuration table (vnsConfigTable)."
REVISION "200904231714Z" -- April 23, 2009 at 17:14 GMT
DESCRIPTION
"Added information about sensor management."
REVISION "200901191349Z" -- January 19, 2009 at 13:49 GMT
DESCRIPTION
"Added new fields for VNS such as vnsEabled.
Added AP filter for ACL list for Access Points"
REVISION "200808131431Z" -- August 13, 2008 at 14:31 GMT
DESCRIPTION
"Added DNS entries.
Aded DAS values
Added RADIUS server information"
REVISION "200711261615Z" -- November 26, 2007 at 16:15 GMT
DESCRIPTION
"DHCP information related to the Controller was added to the MIB."
REVISION "200708111615Z" -- August 11, 2007 at 16:15 GMT
DESCRIPTION
"Modified apTable with additional fields."
REVISION "200701151338Z" -- January 15, 2007 at 13:38 GMT
DESCRIPTION
"Added WDS VNS."
REVISION "200510281312Z" -- October 28, 2005 at 13:12 GMT
DESCRIPTION
"Initial version."
::= { hiPathWirelessModules 2 }
--
-- Textual conventions
--
LogEventSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The log event severities used in the access controller."
SYNTAX INTEGER
{
critical(1),
major(2),
minor(3),
information(4),
trace(5)
}
HundredthOfGauge64 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-2"
STATUS current
DESCRIPTION
"This textual convention represents a hundredth of a 64-bit gauge number."
SYNTAX Counter64
HundredthOfGauge32 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-2"
STATUS current
DESCRIPTION
"This textual convention represents a hundredth of a gauge number."
SYNTAX Gauge32
HundredthOfInt32 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-2"
STATUS current
DESCRIPTION
"This textual convention represents a hundredth of an integer number."
SYNTAX Integer32
--
-- Node definitions
--
-- 1.3.6.1.4.1.4329.15.3.2
hiPathWirelessController OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 2 }
-- 1.3.6.1.4.1.4329.15.3.2.1
systemObjects OBJECT IDENTIFIER ::= { hiPathWirelessController 1 }
-- 1.3.6.1.4.1.4329.15.3.2.1.1
sysSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System software version."
::= { systemObjects 1 }
-- 1.3.6.1.4.1.4329.15.3.2.1.2
sysLogLevel OBJECT-TYPE
SYNTAX LogEventSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sets the level of events which are written to the system
log."
::= { systemObjects 2 }
-- 1.3.6.1.4.1.4329.15.3.2.1.3
sysSerialNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"System serial number."
::= { systemObjects 3 }
-- 1.3.6.1.4.1.4329.15.3.2.1.4
sysLogSupport OBJECT IDENTIFIER ::= { systemObjects 4 }
-- 1.3.6.1.4.1.4329.15.3.2.1.4.1
hiPathWirelessAppLogFacility OBJECT-TYPE
SYNTAX INTEGER
{
local0(0),
local1(1),
local2(2),
local3(3),
local4(4),
local5(5),
local6(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The application log facility level for syslog."
::= { sysLogSupport 1 }
-- 1.3.6.1.4.1.4329.15.3.2.1.4.2
serviceLogFacility OBJECT-TYPE
SYNTAX INTEGER
{
local0(0),
local1(1),
local2(2),
local3(3),
local4(4),
local5(5),
local6(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The service log facility level for syslog."
::= { sysLogSupport 2 }
-- 1.3.6.1.4.1.4329.15.3.2.1.4.3
includeAllServiceMessages OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if DHCP messages should also be forwarded to syslog."
::= { sysLogSupport 3 }
-- 1.3.6.1.4.1.4329.15.3.2.1.4.4
sysLogServersTable OBJECT-TYPE
SYNTAX SEQUENCE OF SysLogServersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of syslog servers to forward logging messages."
::= { sysLogSupport 4 }
-- 1.3.6.1.4.1.4329.15.3.2.1.4.4.1
sysLogServersEntry OBJECT-TYPE
SYNTAX SysLogServersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration information for an external syslog server."
INDEX { sysLogServerIndex }
::= { sysLogServersTable 1 }
SysLogServersEntry ::=
SEQUENCE {
sysLogServerIndex
Integer32,
sysLogServerEnabled
TruthValue,
sysLogServerIP
IpAddress,
sysLogServerPort
Integer32,
sysLogServerRowStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.1
sysLogServerIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Table index for the syslog server."
::= { sysLogServersEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.2
sysLogServerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if messages are to be sent to the syslog server."
::= { sysLogServersEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.3
sysLogServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"syslog server IP address."
::= { sysLogServersEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.4
sysLogServerPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"syslog server port number."
::= { sysLogServersEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.5
sysLogServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus for operating on syslogServersTable."
::= { sysLogServersEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.2.1.5
sysCPUType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Wireless controller's CPU type"
::= { systemObjects 5 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6
apLogManagement OBJECT IDENTIFIER ::= { systemObjects 6 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6.1
apLogCollectionEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this field is set to true, then the AP log collection feature is enabled."
::= { apLogManagement 1 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6.2
apLogFrequency OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of log collections performed daily. The number must be one of the following 1, 2, 4, 6."
::= { apLogManagement 2 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6.3
apLogDestination OBJECT-TYPE
SYNTAX INTEGER
{
local(0),
flash(1),
remote(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination where the log file will be stored. If the
local flash is not mounted, then you can not select 1.
0 : local memory.
1 : flash.
2 : remote location.
"
::= { apLogManagement 3 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6.4
apLogFTProtocol OBJECT-TYPE
SYNTAX INTEGER
{
ftp(0),
scp(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"File transfer protocol. This field has meaning only when apLogDestination is set to remote(2).
0 : ftp.
1 : scp."
::= { apLogManagement 4 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6.5
apLogServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the remote server. This field has meaning only when apLogDestination is set to remote(2)."
::= { apLogManagement 5 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6.6
apLogUserId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user ID that is used for access to the remote server.
This field has meaning only when apLogDestination is set to remote(2)."
::= { apLogManagement 6 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6.7
apLogPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user password that is used for access to the remote server.
This field has meaning only when apLogDestination is set to remote(2).
This field can only be viewed in SNMPv3 mode with privacy."
::= { apLogManagement 7 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6.8
apLogDirectory OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The directory of the remote server.
This field has meaning only when apLogDestination is set to remote(2)."
::= { apLogManagement 8 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6.9
apLogSelectedAPsTable OBJECT-TYPE
SYNTAX SEQUENCE OF APLogSelectedAPsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing a list of APs for which log collection is supported."
::= { apLogManagement 9 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6.9.1
apLogSelectedAPsEntry OBJECT-TYPE
SYNTAX APLogSelectedAPsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration information of an AP which supports the AP log feature."
INDEX { apSerialNo }
::= { apLogSelectedAPsTable 1 }
APLogSelectedAPsEntry ::=
SEQUENCE {
apSerialNo
OCTET STRING,
select
TruthValue
}
-- 1.3.6.1.4.1.4329.15.3.2.1.6.9.1.1
apSerialNo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table index for the apLogSelectedAPs. The AP's serial number serves as the index."
::= { apLogSelectedAPsEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6.9.1.1
select OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether logs are collected from the AP."
::= { apLogSelectedAPsEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.2.1.6.10
apLogQuickSelectedOption OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
addAll(1),
addAllLocal(2),
addAllForeign(3),
removeAll(4),
removeAllLocal(5),
removeAllForeign(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a quick select option for the user to perform the AP's bulk selection.
This field is write-only and read access returns unknown(0) value.
0 : unknown.
1 : add all APs.
2 : add all local APs.
3 : add all foreign APs.
4 : remove all APs.
5 : remove all local APs.
6 : remove all foreign APs."
::= { apLogManagement 10 }
-- 1.3.6.1.4.1.4329.15.3.2.1.7
apLogFileUtility OBJECT IDENTIFIER ::= { systemObjects 7 }
-- 1.3.6.1.4.1.4329.15.3.2.1.7.1
apLogFileUtilityLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of AP log file copy requests that can be
held in the apLogFileCopyTable. A value of 0 indicates no
configured limit."
::= { apLogFileUtility 1 }
-- 1.3.6.1.4.1.4329.15.3.2.1.7.2
apLogFileUtilityCurrent OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of AP log file copy requests currently in the apLogFileCopyTable."
::= { apLogFileUtility 2 }
-- 1.3.6.1.4.1.4329.15.3.2.1.7.5
apLogFileCopyTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApLogFileCopyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of AP log file copy requests."
::= { apLogFileUtility 5 }
apLogFileCopyEntry OBJECT-TYPE
SYNTAX ApLogFileCopyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry describing the AP log file copy request."
INDEX { apLogFileCopyIndex }
::= { apLogFileCopyTable 1 }
ApLogFileCopyEntry ::=
SEQUENCE {
apLogFileCopyIndex
Unsigned32,
apLogFileCopyDestination
INTEGER,
apLogFileCopyProtocol
INTEGER,
apLogFileCopyServerIP
IpAddress,
apLogFileCopyUserID
DisplayString,
apLogFileCopyPassword
DisplayString,
apLogFileCopyServerDirectory
DisplayString,
apLogFileCopyOperation
INTEGER,
apLogFileCopyOperationStatus
INTEGER,
apLogFileCopyRowStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.2.1.7.5.1
apLogFileCopyIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index for this AP log file copy request."
::= { apLogFileCopyEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.2.1.7.5.2
apLogFileCopyDestination OBJECT-TYPE
SYNTAX INTEGER
{
flash(1),
remoteServer(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Destination where the log file will be copied. If the local flash is
not mounted, then you can not select 1.
1 : copy the local AP log file to flash.
2 : copy the local AP log file to remote server. "
::= { apLogFileCopyEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.2.1.7.5.3
apLogFileCopyProtocol OBJECT-TYPE
SYNTAX INTEGER
{
ftp(0),
scp(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"File transfer protocol to be used to copy the log file.
0 : ftp.
1 : scp."
::= { apLogFileCopyEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.2.1.7.5.4
apLogFileCopyServerIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the remote server."
::= { apLogFileCopyEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.2.1.7.5.5
apLogFileCopyUserID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user ID that is used for access to the remote server."
::= { apLogFileCopyEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.2.1.7.5.6
apLogFileCopyPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user password that is used for access to the remote server.
This field can only be viewed in SNMPv3 mode with privacy."
::= { apLogFileCopyEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.2.1.7.5.7
apLogFileCopyServerDirectory OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The directory on the remote server."
::= { apLogFileCopyEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.2.1.7.5.8
apLogFileCopyOperation OBJECT-TYPE
SYNTAX INTEGER
{
start(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this field is set to 1, then the controller will start to perform the copy action."
::= { apLogFileCopyEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.2.1.7.5.9
apLogFileCopyOperationStatus OBJECT-TYPE
SYNTAX INTEGER
{
inactive(1),
pending(2),
running(3),
success(4),
failure(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of the AP log file copy request.
inactive - Indicates that the RowStatus of this conceptual row is not in the `active` state.
pending - Indicates that the AP log file copy described by this row is ready to run and waiting in a queue.
running - Indicates that the AP log file copy described by this row is running.
success - Indicates that the AP log file copy described by this row has successfully run to completion.
failure - Indicates that the AP log file copy described by this row has failed to run to completion."
::= { apLogFileCopyEntry 9 }
apLogFileCopyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status variable for row operations on the apLogFileCopyTable."
::= { apLogFileCopyEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.2.2
dnsObjects OBJECT IDENTIFIER ::= { hiPathWirelessController 2 }
-- 1.3.6.1.4.1.4329.15.3.2.2.1
primaryDNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Primary DNS address configured in the Controller."
::= { dnsObjects 1 }
-- 1.3.6.1.4.1.4329.15.3.2.2.2
secondaryDNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secondary DNS address configured in the Controller."
::= { dnsObjects 2 }
-- 1.3.6.1.4.1.4329.15.3.2.2.3
tertiaryDNS OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Third DNS address configured in the Controller."
::= { dnsObjects 3 }
-- 1.3.6.1.4.1.4329.15.3.2.3
mgmtPortObjects OBJECT IDENTIFIER ::= { hiPathWirelessController 3 }
-- 1.3.6.1.4.1.4329.15.3.2.3.1
mgmtPortIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ifIndex of the management port."
::= { mgmtPortObjects 1 }
-- 1.3.6.1.4.1.4329.15.3.2.3.2
mgmtPortHostname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hostname of the management port."
::= { mgmtPortObjects 2 }
-- 1.3.6.1.4.1.4329.15.3.2.3.5
mgmtPortDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Domain of the management port."
::= { mgmtPortObjects 5 }
-- 1.3.6.1.4.1.4329.15.3.2.4
physicalPortObjects OBJECT IDENTIFIER ::= { hiPathWirelessController 4 }
-- 1.3.6.1.4.1.4329.15.3.2.4.1
physicalPortCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of rows in routerPortsTable."
::= { physicalPortObjects 1 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2
physicalPortsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhysicalPortsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Table of router ports on the controller."
::= { physicalPortObjects 2 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1
physicalPortsEntry OBJECT-TYPE
SYNTAX PhysicalPortsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in routerPortsTable."
INDEX { ifIndex }
::= { physicalPortsTable 1 }
PhysicalPortsEntry ::=
SEQUENCE {
portMgmtTrafficEnable
TruthValue,
portDuplexMode
INTEGER,
portFunction
INTEGER,
portEnabled
INTEGER,
portName
OCTET STRING,
portIpAddress
IpAddress,
portMask
IpAddress,
portMacAddress
MacAddress,
portVlanID
Integer32,
portDHCPEnable
TruthValue,
portDHCPGateway
DisplayString,
portDHCPDomain
DisplayString,
portDHCPDefaultLease
Integer32,
portDHCPMaxLease
Integer32,
portDHCPDnsServers
DisplayString,
portDHCPWins
DisplayString
}
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.1
portMgmtTrafficEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Determines whether controller management
network traffic is allowed over this interface."
::= { physicalPortsEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.2
portDuplexMode OBJECT-TYPE
SYNTAX INTEGER
{
full(1),
half(2),
auto(3)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Duplex mode for the esa ports."
::= { physicalPortsEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.3
portFunction OBJECT-TYPE
SYNTAX INTEGER
{
router(1),
host(2),
thirdPartyAP(3)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Specifies the behavior of the EWC physical ports."
::= { physicalPortsEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.4
portEnabled OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"If enabled, the interface administratively is enabled."
::= { physicalPortsEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.5
portName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"A textual string containing information about the port."
::= { physicalPortsEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.6
portIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The IP address of this port."
::= { physicalPortsEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.7
portMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"The subnet mask associated with the IP address of this port."
::= { physicalPortsEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.8
portMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Port's MAC address."
::= { physicalPortsEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.9
portVlanID OBJECT-TYPE
SYNTAX Integer32 (-1..4094)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"External VLAN tag for the physical port for trasmitted and received packets.
Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value."
DEFVAL { -1 }
::= { physicalPortsEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.10
portDHCPEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"If enabled, the controller is configured as default DHCP server for AP."
::= { physicalPortsEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.11
portDHCPGateway OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Gateway address to be supplied to the wireless clients if controller is
configured as default DHCP server for AP."
::= { physicalPortsEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.12
portDHCPDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Domain name to be supplied to the wireless clients if controller is
configured as default DHCP server for AP."
::= { physicalPortsEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.13
portDHCPDefaultLease OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Default DHCP lease time in seconds to be supplied to the wireless
clients if controller is configured as default DHCP server for AP."
::= { physicalPortsEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.14
portDHCPMaxLease OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Maximum DHCP lease time in seconds to be supplied to the wireless
clients if controller is configured as default DHCP server for AP."
::= { physicalPortsEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.15
portDHCPDnsServers OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"List of DNSs to be supplied to the wireless clients if controller is
configured as default DHCP server for AP."
::= { physicalPortsEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.2.4.2.1.16
portDHCPWins OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"List of WINSs to be supplied to the wireless clients if controller is
configured as default DHCP server for AP."
::= { physicalPortsEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.2.4.3
physicalPortsInternalVlanID OBJECT-TYPE
SYNTAX Integer32 (-1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Internal VLAN tag to be used for physical ports for which the exernal
VLAN tag have not been configured.
Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value."
DEFVAL { 1 }
::= { physicalPortObjects 3 }
-- 1.3.6.1.4.1.4329.15.3.2.4.4
physicalFlash OBJECT-TYPE
SYNTAX INTEGER
{
mounted(1),
unmounted(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Flash drive status."
::= { physicalPortObjects 4 }
-- 1.3.6.1.4.1.4329.15.3.2.4.5
phyDHCPRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF PhyDHCPRangeEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"phyDHCPRangeTable contains the IP address ranges that DHCP
will serve to clients associated with physical ports."
::= { physicalPortObjects 5 }
-- 1.3.6.1.4.1.4329.15.3.2.4.5.1
phyDHCPRangeEntry OBJECT-TYPE
SYNTAX PhyDHCPRangeEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Configuration information for a DHCP range."
INDEX { ifIndex, phyDHCPRangeIndex }
::= { phyDHCPRangeTable 1 }
PhyDHCPRangeEntry ::=
SEQUENCE {
phyDHCPRangeIndex
Integer32,
phyDHCPRangeStart
IpAddress,
phyDHCPRangeEnd
IpAddress,
phyDHCPRangeType
INTEGER,
phyDHCPRangeStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.2.4.5.1.1
phyDHCPRangeIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Index for the DHCP row element."
::= { phyDHCPRangeEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.2.4.5.1.2
phyDHCPRangeStart OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"First IP address in the range."
::= { phyDHCPRangeEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.2.4.5.1.3
phyDHCPRangeEnd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Last IP address in the range."
::= { phyDHCPRangeEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.2.4.5.1.4
phyDHCPRangeType OBJECT-TYPE
SYNTAX INTEGER
{
inclusion(1),
exclusion(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Determines whether addresses in the specified range will
be included, or excluded by the DHCP server."
::= { phyDHCPRangeEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.2.4.5.1.5
phyDHCPRangeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Row status variable for row operations on the phyDHCPRangeTable"
::= { phyDHCPRangeEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.2.4.6
layerTwoPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LayerTwoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains all layer two ports."
::= { physicalPortObjects 6 }
-- 1.3.6.1.4.1.4329.15.3.2.4.6.1
layerTwoPortEntry OBJECT-TYPE
SYNTAX LayerTwoPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry for a layer two port."
INDEX { ifIndex }
::= { layerTwoPortTable 1 }
LayerTwoPortEntry ::=
SEQUENCE {
layerTwoPortName
DisplayString,
layerTwoPortMgmtState
INTEGER,
layerTwoPortMacAddress
MacAddress
}
-- 1.3.6.1.4.1.4329.15.3.2.4.6.1.1
layerTwoPortName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Text string identifying the port within the controller."
::= { layerTwoPortEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.2.4.6.1.2
layerTwoPortMgmtState OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value indicates administrator state of the port. "
DEFVAL { enabled }
::= { layerTwoPortEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.2.4.6.1.3
layerTwoPortMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port's MAC address."
::= { layerTwoPortEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.2.4.7
jumboFrames OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables support for frames up to 1800 bytes long. jumboFrames support only
applies to the controller and compatible APs."
::= { physicalPortObjects 7 }
-- 1.3.6.1.4.1.4329.15.3.2.5
vnManagerObjects OBJECT IDENTIFIER ::= { hiPathWirelessController 5 }
-- 1.3.6.1.4.1.4329.15.3.2.5.1
vnRole OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
vnMgr(2),
vnAgent(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the role of this EWC in inter-EWC mobility.
None indicates that mobile units cannot roam to or
from this EWC. In any EWC cluster, only one EWC should
be specified as vnMgr, all others should be have
vnRole = vnAgent."
::= { vnManagerObjects 1 }
-- 1.3.6.1.4.1.4329.15.3.2.5.2
vnIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ifIndex of the physical port where inter-EWC tunnels terminate.
This field has meaning if vnRole is not none(1)"
::= { vnManagerObjects 2 }
-- 1.3.6.1.4.1.4329.15.3.2.5.3
vnHeartbeatInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time interval between inter-EWC polling messages.
This field has meaning if vnRole is not none(1)"
::= { vnManagerObjects 3 }
-- 1.3.6.1.4.1.4329.15.3.2.5.4
vnLocalClients OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of locally associated clients to this controller that is considered to be
their home controller in the mobility zone, which this controller is part of."
::= { vnManagerObjects 4 }
-- 1.3.6.1.4.1.4329.15.3.2.5.5
vnForeignClients OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of clients that have registered with another controller in the mobility zone,
which this controller is part of, and currently have roamed to this controller."
::= { vnManagerObjects 5 }
-- 1.3.6.1.4.1.4329.15.3.2.5.6
vnTotalClients OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of local and foreign clients on this controller in the Mobility zone."
::= { vnManagerObjects 6 }
-- 1.3.6.1.4.1.4329.15.3.2.6
ntpObjects OBJECT IDENTIFIER ::= { hiPathWirelessController 6 }
-- 1.3.6.1.4.1.4329.15.3.2.6.1
ntpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disables support for the Network Time Protocol (NTP)."
::= { ntpObjects 1 }
-- 1.3.6.1.4.1.4329.15.3.2.6.2
ntpTimezone OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the time zone where this EWC resides."
::= { ntpObjects 2 }
-- 1.3.6.1.4.1.4329.15.3.2.6.3
ntpTimeServer1 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Primary NTP server."
::= { ntpObjects 3 }
-- 1.3.6.1.4.1.4329.15.3.2.6.4
ntpTimeServer2 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secondary NTP server."
::= { ntpObjects 4 }
-- 1.3.6.1.4.1.4329.15.3.2.6.5
ntpTimeServer3 OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Tertiary NTP server."
::= { ntpObjects 5 }
-- 1.3.6.1.4.1.4329.15.3.2.6.6
ntpServerEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disables support for controller as NTP server."
::= { ntpObjects 6 }
-- 1.3.6.1.4.1.4329.15.3.2.7
controllerStats OBJECT IDENTIFIER ::= { hiPathWirelessController 7 }
-- 1.3.6.1.4.1.4329.15.3.2.7.1
tunnelsTxRxBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of transmitted and received bytes over all existing tunnels."
::= { controllerStats 1 }
-- 1.3.6.1.4.1.4329.15.3.2.7.6
tunnelCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of connections to other WirelessController controllers."
::= { controllerStats 6 }
-- 1.3.6.1.4.1.4329.15.3.2.7.7
tunnelStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TunnelStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"tunnelStatsTable contains a list of the IP tunnels connected
to this EWC for use in inter-EWC mobility."
::= { controllerStats 7 }
-- 1.3.6.1.4.1.4329.15.3.2.7.7.1
tunnelStatsEntry OBJECT-TYPE
SYNTAX TunnelStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics for a mobility tunnel."
INDEX { tunnelStartIP, tunnelEndIP }
::= { tunnelStatsTable 1 }
TunnelStatsEntry ::=
SEQUENCE {
tunnelStartIP
IpAddress,
tunnelStartHWC
OCTET STRING,
tunnelEndIP
IpAddress,
tunnelEndHWC
OCTET STRING,
tunnelStatus
INTEGER,
tunnelStatsTxBytes
Counter32,
tunnelStatsRxBytes
Counter32,
tunnelStatsTxRxBytes
Counter32
}
-- 1.3.6.1.4.1.4329.15.3.2.7.7.1.1
tunnelStartIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address for the start of the tunnel."
::= { tunnelStatsEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.2.7.7.1.2
tunnelStartHWC OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the access controller for the start of the tunnel."
::= { tunnelStatsEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.2.7.7.1.3
tunnelEndIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address for the end of the tunnel."
::= { tunnelStatsEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.2.7.7.1.4
tunnelEndHWC OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the access controller for the end of the tunnel."
::= { tunnelStatsEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.2.7.7.1.5
tunnelStatus OBJECT-TYPE
SYNTAX INTEGER
{
disconnected(1),
connected(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates if the mobility tunnel is up or down."
::= { tunnelStatsEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.2.7.7.1.6
tunnelStatsTxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes have been transmitted from the controller at the start of the tunnel to
the controller on the other end of the tunnel."
::= { tunnelStatsEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.2.7.7.1.7
tunnelStatsRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of bytes have been received by the controller at the end of the tunnel from the
controller at the start of the tunnel."
::= { tunnelStatsEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.2.7.7.1.8
tunnelStatsTxRxBytes OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sum of transmitted and received bytes over this tunnel."
::= { tunnelStatsEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.2.7.8
clearAccessRejectMsg OBJECT-TYPE
SYNTAX INTEGER
{
clear(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set this OID to one to erase the contents of the accessRejectMessage table.
The OID always returns 0 when read."
::= { controllerStats 8 }
-- 1.3.6.1.4.1.4329.15.3.2.7.9
accessRejectMsgTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccessRejectMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists each of the reply messages returned in RADIUS Access-Reject messages
and for each reply message, a count of the number of times it has been received."
::= { controllerStats 9 }
-- 1.3.6.1.4.1.4329.15.3.2.7.9.1
accessRejectMsgEntry OBJECT-TYPE
SYNTAX AccessRejectMsgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One entry consisting of a unique Access-Reject Reply-Message (accessRejectReplyMessage) and
count of this message."
INDEX { armIndex }
::= { accessRejectMsgTable 1 }
AccessRejectMsgEntry ::=
SEQUENCE {
armIndex
Integer32,
armCount
Counter64,
armReplyMessage
DisplayString
}
-- 1.3.6.1.4.1.4329.15.3.2.7.9.1
armIndex OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each conceptual row in the accessRejectMsgTable. "
::= { accessRejectMsgEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.2.7.9.2
armCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of the number of times the controller has received an Access-Reject
response from a RADIUS server that contained the associated armReplyMessage."
::= { accessRejectMsgEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.2.7.9.3
armReplyMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A reply message attribute received by the controller from a RADIUS server
in an Access-Reject message."
::= { accessRejectMsgEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.2.8
availability OBJECT IDENTIFIER ::= { hiPathWirelessController 8 }
-- 1.3.6.1.4.1.4329.15.3.2.8.1
availabilityStatus OBJECT-TYPE
SYNTAX INTEGER
{
standalone(0),
paired(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field can be used to enable or disable availability. If it is set to paired(1),
then availability is enabled on this controller, otherwise it is considered that
the controller operates in stand-alone mode. All other availability fields have no
meaning if this field is set to standalone(0)."
::= { availability 1 }
-- 1.3.6.1.4.1.4329.15.3.2.8.2
pairIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of paired controller in availability pairing mode."
::= { availability 2 }
-- 1.3.6.1.4.1.4329.15.3.2.8.3
hwcAvailabilityRank OBJECT-TYPE
SYNTAX INTEGER
{
notConfigured(0),
secondary(1),
primary(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Rank of controller in Availability pairing mode. This is legacy field and applies to
releases before 5.x and in current releases it is used for reporting only."
::= { availability 3 }
-- 1.3.6.1.4.1.4329.15.3.2.8.4
fastFailover OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables fast failover when controller operates in Availability pairing mode."
::= { availability 4 }
-- 1.3.6.1.4.1.4329.15.3.2.8.5
detectLinkFailure OBJECT-TYPE
SYNTAX Unsigned32 (2..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time to detect link failure between two controllers in availability pairing.
The value can be set to values between 2-30 seconds"
DEFVAL { 10 }
::= { availability 5 }
-- 1.3.6.1.4.1.4329.15.3.2.8.6
synchronizeSystemConfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this flag is set to enabled then system configuration is synchronized between
paired controllers operating in Availabilty pairing mode."
::= { availability 6 }
-- 1.3.6.1.4.1.4329.15.3.2.8.7
synchronizeGuestPort OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this flag is set to enabled then Guest Portal user accounts are synchronized between
paired controllers operating in Availabilty pairing mode."
::= { availability 7 }
-- 1.3.6.1.4.1.4329.15.3.2.9
secureConnection OBJECT IDENTIFIER ::= { hiPathWirelessController 9 }
-- 1.3.6.1.4.1.4329.15.3.2.9.1
weakCipherEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"By default usage of weak cipher is enabled on EWC. Weak cipher can be disabled
using this field. "
::= { secureConnection 1 }
-- 1.3.6.1.4.1.4329.15.3.2.10
dashboard OBJECT IDENTIFIER ::= { hiPathWirelessController 10 }
-- 1.3.6.1.4.1.4329.15.3.2.10.1
licensingInformation OBJECT IDENTIFIER ::= { dashboard 1 }
-- 1.3.6.1.4.1.4329.15.3.2.10.1.1
licenseRegulatoryDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Regulatory domain that this wireless controller system has been licensed
for to operate."
::= { licensingInformation 1 }
-- 1.3.6.1.4.1.4329.15.3.2.10.1.2
licenseType OBJECT-TYPE
SYNTAX INTEGER
{
permanent(1),
temporary(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of license for the controller. Temporary lincese allows controller
to operate within defined number of days after which a permanent license
is required for the operation of the controller system."
::= { licensingInformation 2 }
-- 1.3.6.1.4.1.4329.15.3.2.10.1.3
licenseDaysRemaining OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of days is left for the temporary license to expire. This value has
meaning if the license type is temporary(1)."
::= { licensingInformation 3 }
-- 1.3.6.1.4.1.4329.15.3.2.10.1.4
licenseAvailableAP OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If licenseMode is standAlone, this is the maximum number of APs that can be
active on the controller without violating the licensing agreement. If licenseMode
is availabilityPaired, this is the maximum number of APs that can be active on
both members of the availability pair without violating the licensing agreement."
::= { licensingInformation 4 }
-- 1.3.6.1.4.1.4329.15.3.2.10.1.5
licenseInServiceRadarAP OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If licenseMode is standalone this is the maximum number of APs that can be
active on this controller and can operate as Guardians or in-service Radar APs
without violating the licensing agreement. If licenseMode is availabilityPaired,
this is the maximum number of APs that can be active on both members of the
availability pair and can operate as Guardians or in-service Radar APs without
violating the licensing agreement."
::= { licensingInformation 5 }
-- 1.3.6.1.4.1.4329.15.3.2.10.1.6
licenseMode OBJECT-TYPE
SYNTAX INTEGER
{
standAlone(1),
availabilityPaired(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"License mode determines how to interpret the license capacity OIDs. licenseMode
is standalone if the controller is not part of an availability pair. licenseMode is
availabilityPaired if the controller is part of an availability pair."
::= { licensingInformation 6 }
-- 1.3.6.1.4.1.4329.15.3.2.10.1.7
licenseLocalAP OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of AP capacity licenses installed on this controller. "
::= { licensingInformation 7 }
-- 1.3.6.1.4.1.4329.15.3.2.10.1.8
licenseForeignAP OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of AP capacity licenses installed on this controller's availability partner."
::= { licensingInformation 8 }
-- 1.3.6.1.4.1.4329.15.3.2.10.1.9
licenseLocalRadarAP OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of AP Radar capacity licenses installed on this controller."
::= { licensingInformation 9 }
-- 1.3.6.1.4.1.4329.15.3.2.10.1.10
licenseForeignRadarAP OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of AP Radar capacity licenses installed on this controller's availability partner. "
::= { licensingInformation 10 }
-- 1.3.6.1.4.1.4329.15.3.2.10.2
stationsByProtocol OBJECT IDENTIFIER ::= { dashboard 2 }
-- 1.3.6.1.4.1.4329.15.3.2.10.2.1
stationsByProtocolA OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of stations using 802.11a mode to access the network."
::= { stationsByProtocol 1 }
-- 1.3.6.1.4.1.4329.15.3.2.10.2.2
stationsByProtocolB OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of stations using 802.11b mode to access the network."
::= { stationsByProtocol 2 }
-- 1.3.6.1.4.1.4329.15.3.2.10.2.3
stationsByProtocolG OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of stations using 802.11b mode to access the network."
::= { stationsByProtocol 3 }
-- 1.3.6.1.4.1.4329.15.3.2.10.2.4
stationsByProtocolN24 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of stations using 802.11n mode with frequency of 2.4Gig to access
the network."
::= { stationsByProtocol 4 }
-- 1.3.6.1.4.1.4329.15.3.2.10.2.5
stationsByProtocolN5 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of stations using 802.11n mode with frequency of 5Gig to access
the network."
::= { stationsByProtocol 5 }
-- 1.3.6.1.4.1.4329.15.3.2.10.2.6
stationsByProtocolUnavailable OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of stations with sessions on this controller for which
the 802.11 protocol type (a, b, g, n, ac) for which the protocol could
not be determined."
::= { stationsByProtocol 6 }
-- 1.3.6.1.4.1.4329.15.3.2.10.2.7
stationsByProtocolError OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of stations with sessions on this controller for which an AP
reported an invalid (out of range) value as the station's 802.11 protocol type."
::= { stationsByProtocol 7 }
-- 1.3.6.1.4.1.4329.15.3.2.10.2.8
stationsByProtocolAC OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of stations using 802.11ac mode to access the network."
::= { stationsByProtocol 8 }
-- 1.3.6.1.4.1.4329.15.3.2.10.3
apByChannelTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApByChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of aggregated access points that are operating on a specific wireless
channels."
::= { dashboard 3 }
-- 1.3.6.1.4.1.4329.15.3.2.10.3.1
apByChannelEntry OBJECT-TYPE
SYNTAX ApByChannelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table for one wireless channel and aggregated access point
on that channel."
INDEX { apByChannelNumber }
::= { apByChannelTable 1 }
ApByChannelEntry ::=
SEQUENCE {
apByChannelNumber
Unsigned32,
apByChannelAPs
Unsigned32
}
-- 1.3.6.1.4.1.4329.15.3.2.10.3.1.1
apByChannelNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The channel on which a set of access points are presently operating.
If this number is 0, this means the AP is in Guardian mode or the AP's radios
are turned off."
::= { apByChannelEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.2.10.3.1.2
apByChannelAPs OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of the access point on the channel that this row is indexed on."
::= { apByChannelEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3
virtualNetworks OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 3 }
-- 1.3.6.1.4.1.4329.15.3.3.1
vnsConfigObjects OBJECT IDENTIFIER ::= { virtualNetworks 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.1
vnsCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of VNSes defined in vnsConfigTable."
::= { vnsConfigObjects 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2
vnsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains definitions of the Virtual Network Segments
defined on this WirelessController."
::= { vnsConfigObjects 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1
vnsConfigEntry OBJECT-TYPE
SYNTAX VnsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration elements for a specific Virtual Network Segment."
INDEX { vnsIfIndex }
::= { vnsConfigTable 1 }
VnsConfigEntry ::=
SEQUENCE {
vnsDescription
DisplayString,
vnsAssignmentMode
INTEGER,
vnsMUSessionTimeout
Integer32,
vnsAllowMulticast
TruthValue,
vnsSSID
DisplayString,
vnsDomain
DisplayString,
vnsDNSServers
DisplayString,
vnsWINSServers
DisplayString,
vnsAuthModel
INTEGER,
vnsParentIfIndex
Integer32,
vnsMgmtTrafficEnable
TruthValue,
vnsUseDHCPRelay
INTEGER,
vns3rdPartyAP
TruthValue,
vnsStatus
RowStatus,
vnsMode
INTEGER,
vnsVlanID
Integer32,
vnsInterfaceName
OCTET STRING,
vnsMgmIpAddress
IpAddress,
vnsSuppressSSID
TruthValue,
vnsEnable11hSupport
TruthValue,
vnsApplyPowerBackOff
TruthValue,
vnsProcessClientIEReq
TruthValue,
vnsDLSSupportEnable
TruthValue,
vnsDLSAddress
DisplayString,
vnsDLSPort
Integer32,
vnsRateControlProfile
DisplayString,
vnsSessionAvailabilityEnable
TruthValue,
vnsEnabled
INTEGER,
vnsStrictSubnetAdherence
INTEGER,
vnsSLPEnabled
INTEGER,
vnsConfigWLANID
Unsigned32
}
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.1
vnsDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Textual description of the VNS."
::= { vnsConfigEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.2
vnsAssignmentMode OBJECT-TYPE
SYNTAX INTEGER
{
ssid(1),
aaa(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Determines the method by which mobile units are assigned an
address within this VNS. If vnsAssignmentMode = ssid, any
client with an SSID matching the VNS will be assigned an
address from this VNS. If vnsAssignmentMode == aaa, then
address assignment is not completed until after the user is
authenticated."
::= { vnsConfigEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.3
vnsMUSessionTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Client session idle time out, in seconds."
::= { vnsConfigEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.4
vnsAllowMulticast OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When true, allows IP multicast packets to be broadcast
to the clients on this VNS."
::= { vnsConfigEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.5
vnsSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service Set Identifier (i.e. Network Name) that will be
configured on the AccessPoints associated with this VNS."
::= { vnsConfigEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.6
vnsDomain OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Domain name to be supplied to the wireless clients if internal DHCP address assignment."
::= { vnsConfigEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.7
vnsDNSServers OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of DNSs to be supplied to the wireless clients if internal DHCP address assignment."
::= { vnsConfigEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.8
vnsWINSServers OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"List of WINSs to be supplied to the wireless clients if internal DHCP address assignment."
::= { vnsConfigEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.9
vnsAuthModel OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
captivePortal(2),
dot1X(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"vnsAuthModel specifies the authentication method used
for clients in the VNS. None indicates that the VNS is
open, and no authentication is required.
vnsAuthModel=captivePortal may only be specified for
a VNS with vnsAssignmentMode=ssid. Likewise,
vnsAuthModel=dot1X may only be specified for a VNS with
vnsAssignmentMode=aaa."
::= { vnsConfigEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.10
vnsParentIfIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Specifies the ifIndex of the parent VNS, if this VNS
is a child.
If this is a top level VNS, vnsParentIfIndex will return
null or 0."
::= { vnsConfigEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.11
vnsMgmtTrafficEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether clients in the VNS have access
to EWC management elements."
::= { vnsConfigEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.12
vnsUseDHCPRelay OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
dhcpRelay(1),
localDhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable indicates what type of DHCP is used for the VNS.
none(0): No DHCP server on the VNS.
dhcpRelay(1): Uses DHCP relay to reach the DHCP server.
localDhcp(2): Uses local DHCP server on the controler."
::= { vnsConfigEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.13
vns3rdPartyAP OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When true, specifies that the VNS contains 3rd party
access points. Only one such VNS may be defined for
a WirelessController."
::= { vnsConfigEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.14
vnsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus variable for performing row operations on
vnsConfigTable."
::= { vnsConfigEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.15
vnsMode OBJECT-TYPE
SYNTAX INTEGER
{
routed(1),
bridgeAtController(2),
bridgeAtAP(3),
wds(4),
thirdParty(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of traffic for this VNS.
routed(1): The traffic is routed at the controller.
bridgeAtController(2): Traffic is bridged at controller.
bridgeAtAP(3): Traffic is bridged at Access Points.
wds(4): Wireless Distributed System (WDS) type of VNS.
If VNS is type of wds(4), then only vnsSupressSSID,
vnsDescription and vnsSSID has meaning."
DEFVAL { routed }
::= { vnsConfigEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.16
vnsVlanID OBJECT-TYPE
SYNTAX Integer32 (-1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN tag for the packets trasmitted to/from of the VNS. This value has
meaning if vnsMode is bridgeAtController(2) or bridgeAtAP(3).
If vnsMode = bridgeAtController(2), tagging is done at controller.
If vnsMode = bridgeAtAP(3), tagging is done at Access Point.
Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value."
DEFVAL { -1 }
::= { vnsConfigEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.17
vnsInterfaceName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Physical interface to be used in the controller for trasmitting/receiving packets
for the VNS. This value has meaning if vnsMode is bridgeAtController(2)."
::= { vnsConfigEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.18
vnsMgmIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the management port associated to this VNS.
This value has meaning if vnsMode is bridgeAtController(2)."
::= { vnsConfigEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.19
vnsSuppressSSID OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true, this prevents this SSID from appearing in the beacon message."
::= { vnsConfigEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.20
vnsEnable11hSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, enables 802.11h support."
::= { vnsConfigEntry 20 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.21
vnsApplyPowerBackOff OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the AP will direct 802.11h-enabled clients to
apply the same power back-off setting that the AP is using"
::= { vnsConfigEntry 21 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.22
vnsProcessClientIEReq OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, enables support for 802.11d client information request."
::= { vnsConfigEntry 22 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.23
vnsDLSSupportEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, enables support for DLS Support. This value has
meaning only if vnsUseDHCPRelay is selected as localDhcp(2) and
vnsMode is select as either routed(1) or bridgeAtController(2)."
::= { vnsConfigEntry 23 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.24
vnsDLSAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DNS IP Address for DLS associated to this VNS. It could be IP address
or Name"
::= { vnsConfigEntry 24 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.25
vnsDLSPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DNS Port for DLS associated to this VNS."
DEFVAL { 18443 }
::= { vnsConfigEntry 25 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.26
vnsRateControlProfile OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Rate Control Profile that is referenced by this VNS."
::= { vnsConfigEntry 26 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.27
vnsSessionAvailabilityEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To indicate if Session Availability feature is enabled."
::= { vnsConfigEntry 27 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.28
vnsEnabled OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VNS status of being enabled or disabled."
::= { vnsConfigEntry 28 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.29
vnsStrictSubnetAdherence OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Subnet adherence verification status for the VNS. Controller only
learns devices whose address is within range of VNS segment definition.
Disabling this field causes to not enforce validation. Doing so,
may expose the controller to in-advertent Learning DoS attacks.
"
::= { vnsConfigEntry 29 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.30
vnsSLPEnabled OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status of SLP flag on Bridge at Controller type VNS. This field does
not have any meaning for other types of VNS."
::= { vnsConfigEntry 30 }
-- 1.3.6.1.4.1.4329.15.3.3.1.2.1.31
vnsConfigWLANID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Creation of VNS requires existing of a free WLAN. One WLAN can only be used in
one VNS only. This ID identifies the WLAN that is used for creation of VNS that is
identified by this row."
::= { vnsConfigEntry 31 }
-- 1.3.6.1.4.1.4329.15.3.3.1.3
vnsDHCPRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsDHCPRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"vnsDHCPRangeTable contains the IP address ranges that DHCP
will serve to clients associated with this VNS."
::= { vnsConfigObjects 3 }
-- 1.3.6.1.4.1.4329.15.3.3.1.3.1
vnsDHCPRangeEntry OBJECT-TYPE
SYNTAX VnsDHCPRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration information for a DHCP range."
INDEX { ifIndex, vnsDHCPRangeIndex }
::= { vnsDHCPRangeTable 1 }
VnsDHCPRangeEntry ::=
SEQUENCE {
vnsDHCPRangeIndex
Integer32,
vnsDHCPRangeStart
IpAddress,
vnsDHCPRangeEnd
IpAddress,
vnsDHCPRangeType
INTEGER,
vnsDHCPRangeStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.3.1.3.1.1
vnsDHCPRangeIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index for the DHCP row element."
::= { vnsDHCPRangeEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.3.1.2
vnsDHCPRangeStart OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"First IP address in the range."
::= { vnsDHCPRangeEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.3.1.3
vnsDHCPRangeEnd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Last IP address in the range."
::= { vnsDHCPRangeEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.1.3.1.4
vnsDHCPRangeType OBJECT-TYPE
SYNTAX INTEGER
{
inclusion(1),
exclusion(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Determines whether addresses in the specified range will
be included, or excluded by the DHCP server."
::= { vnsDHCPRangeEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.1.3.1.5
vnsDHCPRangeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Row status variable for row operations on the vnsDHCPRangeTable"
::= { vnsDHCPRangeEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4
vnsCaptivePortalTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsCaptivePortalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Details of the Captive Portal login page for
VNSes that have vnsAssignment=ssid and
vnsAuthModel=captivePortal."
::= { vnsConfigObjects 4 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1
vnsCaptivePortalEntry OBJECT-TYPE
SYNTAX VnsCaptivePortalEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Captive Portal Information for the VNS."
INDEX { ifIndex }
::= { vnsCaptivePortalTable 1 }
VnsCaptivePortalEntry ::=
SEQUENCE {
cpURL
DisplayString,
cpLoginLabel
DisplayString,
cpPasswordLabel
DisplayString,
cpHeaderURL
DisplayString,
cpFooterURL
DisplayString,
cpMessage
DisplayString,
cpReplaceGatewayWithFQDN
DisplayString,
cpDefaultRedirectionURL
DisplayString,
cpConnectionIP
IpAddress,
cpConnectionPort
Integer32,
cpSharedSecret
OCTET STRING,
cpLogOff
INTEGER,
cpStatusCheck
INTEGER,
cpType
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.1
cpURL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redirect URL of the Captive Portal login page."
::= { vnsCaptivePortalEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.2
cpLoginLabel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Label that appears in front of the login field
on the Captive Portal login page."
::= { vnsCaptivePortalEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.3
cpPasswordLabel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Label that appears in front of the password field
on the Captive Portal login page."
::= { vnsCaptivePortalEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.4
cpHeaderURL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"URL of the Captive Portal header."
::= { vnsCaptivePortalEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.5
cpFooterURL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"URL of the Captive Portal footer."
::= { vnsCaptivePortalEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.6
cpMessage OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"A welcome message, or set of instructions that is to
appear on the Captive Portal login page."
::= { vnsCaptivePortalEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.7
cpReplaceGatewayWithFQDN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Fully Qualified Domain Name (FQDN) to be used as the gateway IP address."
::= { vnsCaptivePortalEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.8
cpDefaultRedirectionURL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default Redirect URL of the Captive Portal login page."
::= { vnsCaptivePortalEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.9
cpConnectionIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the Controller interface for Captive Portal."
::= { vnsCaptivePortalEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.10
cpConnectionPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port number on the cpConnectionIP interface."
::= { vnsCaptivePortalEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.11
cpSharedSecret OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Secret Key to be used to encrypt the information passed between the
Controller and the external web server. It is the password common to
both Controller and the external web server."
::= { vnsCaptivePortalEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.12
cpLogOff OBJECT-TYPE
SYNTAX INTEGER
{
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Toggles the display of logoff popup screen, allowing users to control their logoff."
::= { vnsCaptivePortalEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.13
cpStatusCheck OBJECT-TYPE
SYNTAX INTEGER
{
off(0),
on(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Toggles the display of popup window with session statistics for users to
monitor their usage and time left in session."
::= { vnsCaptivePortalEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.3.1.4.1.14
cpType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
internal(2),
external(4),
guestPortal(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of captive portal is enabled for the selected VNS.
none(1) = no captive portal configured or type is unknown.
internal(2) = internal captive portal.
external(4) = external captive portal.
guestPortal (5) = open host captive portal."
::= { vnsCaptivePortalEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.3.1.5
vnsRadiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsRadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of RADIUS servers to be utilized for authentication in the VNS."
::= { vnsConfigObjects 5 }
-- 1.3.6.1.4.1.4329.15.3.3.1.5.1
vnsRadiusServerEntry OBJECT-TYPE
SYNTAX VnsRadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration information for a RADIUS server."
INDEX { ifIndex, vnsRadiusServerName }
::= { vnsRadiusServerTable 1 }
VnsRadiusServerEntry ::=
SEQUENCE {
vnsRadiusServerName
DisplayString,
vnsRadiusServerPort
Integer32,
vnsRadiusServerRetries
Integer32,
vnsRadiusServerTimeout
Integer32,
vnsRadiusServerSharedSecret
DisplayString,
vnsRadiusServerNASIdentifier
DisplayString,
vnsRadiusServerAuthType
INTEGER,
vnsRadiusServerRowStatus
RowStatus,
vnsRadiusServerNasAddress
IpAddress
}
-- 1.3.6.1.4.1.4329.15.3.3.1.5.1.1
vnsRadiusServerName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the RADIUS server."
::= { vnsRadiusServerEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.5.1.2
vnsRadiusServerPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port number for the RADIUS server."
::= { vnsRadiusServerEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.5.1.3
vnsRadiusServerRetries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retries for a RADIUS authentication request."
::= { vnsRadiusServerEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.1.5.1.4
vnsRadiusServerTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Delay between requests."
::= { vnsRadiusServerEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.1.5.1.5
vnsRadiusServerSharedSecret OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shared secret to be used between the NAS and RADIUS server."
::= { vnsRadiusServerEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.1.5.1.6
vnsRadiusServerNASIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NAS identifier to be included in RADIUS request."
::= { vnsRadiusServerEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.1.5.1.7
vnsRadiusServerAuthType OBJECT-TYPE
SYNTAX INTEGER
{
pap(0),
chap(1),
msChap(2),
msChapV2(3),
notApplicable(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Challenge mechanism for the request."
::= { vnsRadiusServerEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.1.5.1.8
vnsRadiusServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus value for manipulating vnsRADIUSServerTable."
::= { vnsRadiusServerEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.1.5.1.9
vnsRadiusServerNasAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NAS address to be included in RADIUS request."
::= { vnsRadiusServerEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.1.6
vnsFilterIDTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsFilterIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of names filters for a VNS."
::= { vnsConfigObjects 6 }
-- 1.3.6.1.4.1.4329.15.3.3.1.6.1
vnsFilterIDEntry OBJECT-TYPE
SYNTAX VnsFilterIDEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Name of a specific filter in the VNS."
INDEX { ifIndex, vnsFilterID }
::= { vnsFilterIDTable 1 }
VnsFilterIDEntry ::=
SEQUENCE {
vnsFilterID
DisplayString,
vnsFilterIDStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.3.1.6.1.1
vnsFilterID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Filter names."
::= { vnsFilterIDEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.6.1.2
vnsFilterIDStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus for operating on vnsFilterIDTable."
::= { vnsFilterIDEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.7
vnsFilterRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsFilterRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table containing specific filters for a named filter."
::= { vnsConfigObjects 7 }
-- 1.3.6.1.4.1.4329.15.3.3.1.7.1
vnsFilterRuleEntry OBJECT-TYPE
SYNTAX VnsFilterRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filter elements for an individual VNS filter."
INDEX { ifIndex, vnsFilterID, vnsFilterRuleOrder }
::= { vnsFilterRuleTable 1 }
VnsFilterRuleEntry ::=
SEQUENCE {
vnsFilterRuleOrder
Integer32,
vnsFilterRuleDirection
INTEGER,
vnsFilterRuleAction
INTEGER,
vnsFilterRuleIPAddress
IpAddress,
vnsFilterRulePortLow
Integer32,
vnsFilterRulePortHigh
Integer32,
vnsFilterRuleProtocol
INTEGER,
vnsFilterRuleEtherType
INTEGER,
vnsFilterRuleStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.3.1.7.1.1
vnsFilterRuleOrder OBJECT-TYPE
SYNTAX Integer32 (1..65532)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Position of the filter in the filter list."
::= { vnsFilterRuleEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.7.1.2
vnsFilterRuleDirection OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
in(1),
out(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Traffic direction defined by the rule."
::= { vnsFilterRuleEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.7.1.3
vnsFilterRuleAction OBJECT-TYPE
SYNTAX INTEGER
{
allow(1),
disallow(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Allow or deny traffic for the filter."
::= { vnsFilterRuleEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.1.7.1.4
vnsFilterRuleIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address to apply the filter."
::= { vnsFilterRuleEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.1.7.1.5
vnsFilterRulePortLow OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Low port number for the filter."
::= { vnsFilterRuleEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.1.7.1.6
vnsFilterRulePortHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"High port number for the filter."
::= { vnsFilterRuleEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.1.7.1.7
vnsFilterRuleProtocol OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
notApplicable(1),
tcp(2),
udp(3),
icmp(4),
ipsecESP(5),
ipsecAH(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specific protocol to filter."
::= { vnsFilterRuleEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.1.7.1.8
vnsFilterRuleEtherType OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
ip(1),
arp(2),
rarp(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specific ethertype to filter."
::= { vnsFilterRuleEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.1.7.1.9
vnsFilterRuleStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus value for the vnsFilterRuleTable."
::= { vnsFilterRuleEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.1.8
vnsPrivacyTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsPrivacyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of privacy settings for the VNS."
::= { vnsConfigObjects 8 }
-- 1.3.6.1.4.1.4329.15.3.3.1.8.1
vnsPrivacyEntry OBJECT-TYPE
SYNTAX VnsPrivacyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration values for a specific privacy setting."
INDEX { ifIndex }
::= { vnsPrivacyTable 1 }
VnsPrivacyEntry ::=
SEQUENCE {
vnsPrivWEPKeyType
INTEGER,
vnsPrivDynamicRekeyFrequency
Integer32,
vnsPrivWEPKeyLength
Integer32,
vnsPrivWPA1Enabled
TruthValue,
vnsPrivUseSharedKey
TruthValue,
vnsPrivWPASharedKey
DisplayString,
vnsPrivWPA2Enabled
TruthValue
}
-- 1.3.6.1.4.1.4329.15.3.3.1.8.1.1
vnsPrivWEPKeyType OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
wepstatic(2),
wpapsk(3),
dynamic(4),
wpa(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of key in use.
none(1) = not cofigured,
wepstatic(2) = static WEP,
wpapsk(3) = WPA Pre-Shared Key,
dynamic(4) = dynamically assigned,
wpa(5) = WPA."
::= { vnsPrivacyEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.8.1.2
vnsPrivDynamicRekeyFrequency OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dynamic WEP re-keying frequency, in seconds. Setting this
value to 0 disables rekeying.
This value is only meaningful if vnsPrivWEPKeyType = wpapsk(3).
For any other values of vnsPrivWEPKeyType, reading or setting
this value will return an unsuccessful status and will return
a value of null or zero."
::= { vnsPrivacyEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.8.1.3
vnsPrivWEPKeyLength OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WEP key length, 64, 128, or 152 bits. If vnsPrivWEPKeyType
is none, reading or setting this value will return an
unsuccessful status and will return a value of null or zero."
::= { vnsPrivacyEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.1.8.1.4
vnsPrivWPA1Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables WPA.1 (Wi-Fi Protected Access)."
::= { vnsPrivacyEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.1.8.1.5
vnsPrivUseSharedKey OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables the use of WPA shared key for this VNS."
::= { vnsPrivacyEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.1.8.1.6
vnsPrivWPASharedKey OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the WPA shared key for this VNS.
This value is logically WRITE ONLY. Attempts
to read this value shall return unsuccessful
status and values of null or zero."
::= { vnsPrivacyEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.1.8.1.7
vnsPrivWPA2Enabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When true, WPA v.2 support is enabled."
::= { vnsPrivacyEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.1.9
vnsWEPKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsWEPKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of WEP key entries for a static WEP definition."
::= { vnsConfigObjects 9 }
-- 1.3.6.1.4.1.4329.15.3.3.1.9.1
vnsWEPKeyEntry OBJECT-TYPE
SYNTAX VnsWEPKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WEP key for a single entry in the table."
INDEX { ifIndex, vnsWEPKeyIndex }
::= { vnsWEPKeyTable 1 }
VnsWEPKeyEntry ::=
SEQUENCE {
vnsWEPKeyIndex
Integer32,
vnsWEPKeyValue
WEPKeytype
}
-- 1.3.6.1.4.1.4329.15.3.3.1.9.1.1
vnsWEPKeyIndex OBJECT-TYPE
SYNTAX Integer32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Table index for the WEP key."
::= { vnsWEPKeyEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.9.1.2
vnsWEPKeyValue OBJECT-TYPE
SYNTAX WEPKeytype
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of a WEP key for this VNS.
This value is logically WRITE ONLY. Attempts
to read this value shall return unsuccessful
status and values of null or zero."
::= { vnsWEPKeyEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.10
vns3rdPartyAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF Vns3rdPartyAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a list of 3rd Party access points for
the EWC."
::= { vnsConfigObjects 10 }
-- 1.3.6.1.4.1.4329.15.3.3.1.10.1
vns3rdPartyAPEntry OBJECT-TYPE
SYNTAX Vns3rdPartyAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration information for a 3rd party access point."
INDEX { ifIndex, apMacAddress }
::= { vns3rdPartyAPTable 1 }
Vns3rdPartyAPEntry ::=
SEQUENCE {
apMacAddress
MacAddress,
apIpAddress
IpAddress
}
-- 1.3.6.1.4.1.4329.15.3.3.1.10.1.1
apMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet MAC address of the 3rd party access point."
::= { vns3rdPartyAPEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.10.1.2
apIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the 3rd party access point."
::= { vns3rdPartyAPEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11
vnsQoSTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsQoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains list of per-VNS QoS related configuration."
::= { vnsConfigObjects 11 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1
vnsQoSEntry OBJECT-TYPE
SYNTAX VnsQoSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry related to QoS configuration for the VNS indexed by vnsIfIndex."
INDEX { vnsIfIndex }
::= { vnsQoSTable 1 }
VnsQoSEntry ::=
SEQUENCE {
vnsQoSWirelessLegacyFlag
INTEGER,
vnsQoSWirelessWMMFlag
INTEGER,
vnsQoSWireless80211eFlag
INTEGER,
vnsQoSWirelessTurboVoiceFlag
INTEGER,
vnsQoSPriorityOverrideFlag
INTEGER,
vnsQoSPriorityOverrideSC
INTEGER,
vnsQoSPriorityOverrideDSCP
Integer32,
vnsQoSClassificationServiceClass
OCTET STRING,
vnsQoSWirelessEnableUAPSD
INTEGER,
vnsQoSWirelessUseAdmControlVoice
INTEGER,
vnsQoSWirelessUseAdmControlVideo
INTEGER,
vnsQoSWirelessULPolicerAction
INTEGER,
vnsQoSWirelessDLPolicerAction
INTEGER,
vnsQoSWirelessUseAdmControlBestEffort
INTEGER,
vnsQoSWirelessUseAdmControlBackground
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.1
vnsQoSWirelessLegacyFlag OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable/disable legacy QoS feature."
::= { vnsQoSEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.2
vnsQoSWirelessWMMFlag OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable/disable WMM feature."
::= { vnsQoSEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.3
vnsQoSWireless80211eFlag OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable/disable 802.11e feature."
::= { vnsQoSEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.4
vnsQoSWirelessTurboVoiceFlag OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable/disable turbo feature."
::= { vnsQoSEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.5
vnsQoSPriorityOverrideFlag OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable the use of DSCP to override Servic Class (SC) value."
DEFVAL { disabled }
::= { vnsQoSEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.6
vnsQoSPriorityOverrideSC OBJECT-TYPE
SYNTAX INTEGER
{
background(0),
bestEffort(1),
bronze(2),
silver(3),
gold(4),
platinum(5),
premiumVoice(6),
networkControl(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service class (SC) of the override value. This field has a meaning
if vnsQoSPriorityOverrideFlag is enabled."
DEFVAL { background }
::= { vnsQoSEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.7
vnsQoSPriorityOverrideDSCP OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DSCP override value to be used for the service class. This field has a meaning
if vnsQoSPriorityOverrideFlag is enabled."
DEFVAL { 0 }
::= { vnsQoSEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.8
vnsQoSClassificationServiceClass OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service Class value for the DSCP code. This field is 64-bytes long. Each
byte represents mapping between DSCP and Service Class. Position of each
byte in the array represents DSCP code and the content of each byte
represents the service class value for that DSCP code. For example,
second byte represents DSCP code 1 and its value represents SC value.
Value for each byte is equivalent to either of:
background = 0,
bestEffort = 1,
bronze = 2,
silver = 3,
gold = 4,
platinum = 5,
premiumVoice = 6,
networkControl = 7"
::= { vnsQoSEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.9
vnsQoSWirelessEnableUAPSD OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable is used to enable/disable U-APSD feature."
::= { vnsQoSEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.10
vnsQoSWirelessUseAdmControlVoice OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, admission control for voice traffic is used."
::= { vnsQoSEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.11
vnsQoSWirelessUseAdmControlVideo OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, admission control for vedio traffic is used.
This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled."
::= { vnsQoSEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.12
vnsQoSWirelessULPolicerAction OBJECT-TYPE
SYNTAX INTEGER
{
doNothing(0),
sendDELTStoClient(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If doNothing is selected, no action is taken. This is default value.
If sendDELTStoClient is selected, AP will send DELTS if a client
is abusing in uplink. This field has a meaning only if admission
control is enabled for VO or VI."
DEFVAL { doNothing }
::= { vnsQoSEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.13
vnsQoSWirelessDLPolicerAction OBJECT-TYPE
SYNTAX INTEGER
{
doNothing(0),
downgrade(1),
drop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If doNothing is selected, no action is taken. This is default value.
If downgrade is selected, AP will downgrade all traffic to the
highest AC that does not require CAC in downlink.
If drop is selected, AP will drop client if it observes a client
that is illegally using an AC that has CAC mandatory in downlink.
This field has a meaning only if admission control is enabled for
VO or VI."
DEFVAL { doNothing }
::= { vnsQoSEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.14
vnsQoSWirelessUseAdmControlBestEffort OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, admission control for video traffic is set to Best Effort.
This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled."
::= { vnsQoSEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.3.1.11.1.15
vnsQoSWirelessUseAdmControlBackground OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If enabled, admission control for video traffic is set to Background.
This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled."
::= { vnsQoSEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.3.1.12
vnsWDSRFTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsWDSRFEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"ontains definitions of the Wireless Distirbution System (WDS) VNS defined on this Controller."
::= { vnsConfigObjects 12 }
-- 1.3.6.1.4.1.4329.15.3.3.1.12.1
vnsWDSRFEntry OBJECT-TYPE
SYNTAX VnsWDSRFEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Configuration elements for a specific WDS VNS."
INDEX { vnsIfIndex, apIndex }
::= { vnsWDSRFTable 1 }
VnsWDSRFEntry ::=
SEQUENCE {
vnsWDSRFAPName
DisplayString,
vnsWDSRFbgService
INTEGER,
vnsWDSRFaService
INTEGER,
vnsWDSRFPreferredParent
DisplayString,
vnsWDSRFBackupParent
DisplayString,
vnsWDSRFBridge
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.3.1.12.1.1
vnsWDSRFAPName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"AP name."
::= { vnsWDSRFEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.12.1.2
vnsWDSRFbgService OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
none(1),
child(2),
parent(3),
both(4)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Type of service offered by this radio."
::= { vnsWDSRFEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.12.1.3
vnsWDSRFaService OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
none(1),
child(2),
parent(3),
both(4)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Type of service offered by this radio."
::= { vnsWDSRFEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.1.12.1.4
vnsWDSRFPreferredParent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Desired preferred parent."
::= { vnsWDSRFEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.1.12.1.5
vnsWDSRFBackupParent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Desired backup parent."
::= { vnsWDSRFEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.1.12.1.6
vnsWDSRFBridge OBJECT-TYPE
SYNTAX INTEGER
{
bridged(1),
notBridged(2)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"WDS bridge status."
::= { vnsWDSRFEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.1.13
vnsRateControlProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsRateControlProfEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Table of Rate Control Profiles."
::= { vnsConfigObjects 13 }
-- 1.3.6.1.4.1.4329.15.3.3.1.13.1
vnsRateControlProfEntry OBJECT-TYPE
SYNTAX VnsRateControlProfEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Name of a specific Rate Control Profile."
INDEX { vnsRateControlProfInd }
::= { vnsRateControlProfTable 1 }
VnsRateControlProfEntry ::=
SEQUENCE {
vnsRateControlProfInd
Unsigned32,
vnsRateControlProfName
DisplayString,
vnsRateControlCIR
Unsigned32,
vnsRateControlCBS
Unsigned32
}
-- 1.3.6.1.4.1.4329.15.3.3.1.13.1.1
vnsRateControlProfInd OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"A monotonically increasing integer which acts as index of entries
within the named Rate Control Profiles."
::= { vnsRateControlProfEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.13.1.2
vnsRateControlProfName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Rate Control Profile Name."
::= { vnsRateControlProfEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.13.1.3
vnsRateControlCIR OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Rate Control Average Rate (CIR) in kbps."
::= { vnsRateControlProfEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.1.13.1.4
vnsRateControlCBS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Rate Control Burst Size (CBS) in bytes."
::= { vnsRateControlProfEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.1.14
vnsAPFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsAPFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Filters applied to Access Points via VNS settings and assignments."
::= { vnsConfigObjects 14 }
-- 1.3.6.1.4.1.4329.15.3.3.1.14.1
vnsAPFilterEntry OBJECT-TYPE
SYNTAX VnsAPFilterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing filters definition for Access Points assigned
to VNS that is identified by VNS index."
INDEX { ifIndex, vnsFilterID, vnsAPFilterRuleOrder }
::= { vnsAPFilterTable 1 }
VnsAPFilterEntry ::=
SEQUENCE {
vnsAPFilterRuleOrder
Integer32,
vnsAPFilterRuleDirection
INTEGER,
vnsAPFilterAction
Integer32,
vnsAPFilterIPAddress
IpAddress,
vnsAPFilterMask
IpAddress,
vnsAPFilterPortLow
Integer32,
vnsAPFilterPortHigh
Integer32,
vnsAPFilterProtocol
Integer32,
vnsAPFilterEtherType
INTEGER,
vnsAPFilterRowStatus
Integer32
}
-- 1.3.6.1.4.1.4329.15.3.3.1.14.1.1
vnsAPFilterRuleOrder OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Position of the filter in the filter list."
::= { vnsAPFilterEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.1.14.1.2
vnsAPFilterRuleDirection OBJECT-TYPE
SYNTAX INTEGER
{
in(1),
out(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Traffic direction related to the filter rule."
::= { vnsAPFilterEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.1.14.1.3
vnsAPFilterAction OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Allow or deny traffic for the filter."
::= { vnsAPFilterEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.1.14.1.4
vnsAPFilterIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IP address applied to the filter."
::= { vnsAPFilterEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.1.14.1.5
vnsAPFilterMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mask, number of bits set to one in the mask, applied to filter IP address."
::= { vnsAPFilterEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.1.14.1.6
vnsAPFilterPortLow OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Low port number for the filter."
::= { vnsAPFilterEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.1.14.1.7
vnsAPFilterPortHigh OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"High port number for the filter."
::= { vnsAPFilterEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.1.14.1.8
vnsAPFilterProtocol OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specific protocol for the filter."
::= { vnsAPFilterEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.1.14.1.9
vnsAPFilterEtherType OBJECT-TYPE
SYNTAX INTEGER
{
ip(1),
arp(2),
rarp(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specific ethertype to the filter."
::= { vnsAPFilterEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.1.14.1.10
vnsAPFilterRowStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus value for this table entry."
::= { vnsAPFilterEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.3.2
vnsStatsObjects OBJECT IDENTIFIER ::= { virtualNetworks 2 }
-- 1.3.6.1.4.1.4329.15.3.3.2.1
activeVNSSessionCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of active VNSs."
::= { vnsStatsObjects 1 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2
vnsStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsStatEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Description."
::= { vnsStatsObjects 2 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1
vnsStatEntry OBJECT-TYPE
SYNTAX VnsStatEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Description."
INDEX { vnsIfIndex }
::= { vnsStatTable 1 }
VnsStatEntry ::=
SEQUENCE {
vnsStatName
OCTET STRING,
vnsStatTxPkts
Counter64,
vnsStatRxPkts
Counter64,
vnsStatTxOctects
Counter64,
vnsStatRxOctects
Counter64,
vnsStatMulticastTxPkts
Counter64,
vnsStatMulticastRxPkts
Counter64,
vnsStatBroadcastTxPkts
Counter64,
vnsStatBroadcastRxPkts
Counter64,
vnsStatRadiusTotRequests
Counter64,
vnsStatRadiusReqFailed
Counter64,
vnsStatRadiusReqRejected
Counter64
}
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1.1
vnsStatName OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Name of the VNS."
::= { vnsStatEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1.2
vnsStatTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Trasmitted packets."
::= { vnsStatEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1.3
vnsStatRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Received packtes."
::= { vnsStatEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1.4
vnsStatTxOctects OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Trasmitted octects."
::= { vnsStatEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1.5
vnsStatRxOctects OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Received octets."
::= { vnsStatEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1.6
vnsStatMulticastTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Multicast trasmitted packets."
::= { vnsStatEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1.7
vnsStatMulticastRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Multicast received packets."
::= { vnsStatEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1.8
vnsStatBroadcastTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Broadcast trasmitted packets."
::= { vnsStatEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1.9
vnsStatBroadcastRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Broadcast received packets."
::= { vnsStatEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1.10
vnsStatRadiusTotRequests OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Total requests sent to radius server."
::= { vnsStatEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1.11
vnsStatRadiusReqFailed OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Requests that failed to be processed by radius server."
::= { vnsStatEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.3.2.2.1.12
vnsStatRadiusReqRejected OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Requests that have been rejected by radius server."
::= { vnsStatEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.3.2.3
vnsExceptionStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsExceptionStatEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Description."
::= { vnsStatsObjects 3 }
-- 1.3.6.1.4.1.4329.15.3.3.2.3.1
vnsExceptionStatEntry OBJECT-TYPE
SYNTAX VnsExceptionStatEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Description."
INDEX { vnsIfIndex, vnsExceptionFiterName }
::= { vnsExceptionStatTable 1 }
VnsExceptionStatEntry ::=
SEQUENCE {
vnsExceptionFiterName
OCTET STRING,
vnsExceptionStatPktsDenied
Counter64,
vnsExceptionStatPktsAllowed
Counter64
}
-- 1.3.6.1.4.1.4329.15.3.3.2.3.1.1
vnsExceptionFiterName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Filter name."
::= { vnsExceptionStatEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.2.3.1.2
vnsExceptionStatPktsDenied OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Total packets that are denied by defined filters."
::= { vnsExceptionStatEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.2.3.1.3
vnsExceptionStatPktsAllowed OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Total packets that are allowed by defined filters."
::= { vnsExceptionStatEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4
vnsWDSStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF VnsWDSStatEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Description."
::= { vnsStatsObjects 4 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1
vnsWDSStatEntry OBJECT-TYPE
SYNTAX VnsWDSStatEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Description."
INDEX { vnsIfIndex, apIndex }
::= { vnsWDSStatTable 1 }
VnsWDSStatEntry ::=
SEQUENCE {
vnsWDSStatAPName
DisplayString,
vnsWDSStatAPRole
INTEGER,
vnsWDSStatAPRadio
DisplayString,
vnsWDSStatAPParent
DisplayString,
vnsWDSStatSSID
DisplayString,
vnsWDSStatRxFrame
Counter64,
vnsWDSStatTxFrame
Counter64,
vnsWDSStatRxError
Counter64,
vnsWDSStatTxError
Counter64,
vnsWDSStatRxRSSI
Integer32,
vnsWDSStatRxRate
Counter64,
vnsWDSStatTxRate
Counter64
}
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1.1
vnsWDSStatAPName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"AP name serving WDS VNS."
::= { vnsWDSStatEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1.2
vnsWDSStatAPRole OBJECT-TYPE
SYNTAX INTEGER
{
unknown(-1),
none(0),
satellite(1),
root(2),
repeater(3)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Role of the AP in WDS tree. All the statistics and configuration information
in this table has no meaning if the role is unknown(-1)."
::= { vnsWDSStatEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1.3
vnsWDSStatAPRadio OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Radio and freq on which uplink WDS is established, N/A if connected
over etherent (value are 'a:<freq>', 'b/g:<freq>', or 'N/A') "
::= { vnsWDSStatEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1.4
vnsWDSStatAPParent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"AP Name of the parent AP."
::= { vnsWDSStatEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1.5
vnsWDSStatSSID OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"SSID of the WDS VNS where parent WDS link is established."
::= { vnsWDSStatEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1.6
vnsWDSStatRxFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Received frames from the parent AP."
::= { vnsWDSStatEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1.7
vnsWDSStatTxFrame OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Transmitted frames to the parent AP."
::= { vnsWDSStatEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1.8
vnsWDSStatRxError OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Received frames in error from the parent AP."
::= { vnsWDSStatEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1.9
vnsWDSStatTxError OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Transmitted frames in error to the parent AP."
::= { vnsWDSStatEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1.10
vnsWDSStatRxRSSI OBJECT-TYPE
SYNTAX Integer32 (0..64)
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Average Received Signal Strength Indicator (RSSI)."
::= { vnsWDSStatEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1.11
vnsWDSStatRxRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Average receive rate."
::= { vnsWDSStatEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.3.2.4.1.12
vnsWDSStatTxRate OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Average transmission rate."
::= { vnsWDSStatEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.3.3
vnsGlobalSetting OBJECT IDENTIFIER ::= { virtualNetworks 3 }
-- 1.3.6.1.4.1.4329.15.3.3.3.1
wirelessQoS OBJECT IDENTIFIER ::= { vnsGlobalSetting 1 }
-- 1.3.6.1.4.1.4329.15.3.3.3.1.1
maxVoiceBWforReassociation OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum voice bandwidth to be used for re-association."
DEFVAL { 80 }
::= { wirelessQoS 1 }
-- 1.3.6.1.4.1.4329.15.3.3.3.1.2
maxVoiceBWforAssociation OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum voice bandwidth to be used for association."
DEFVAL { 60 }
::= { wirelessQoS 2 }
-- 1.3.6.1.4.1.4329.15.3.3.3.1.3
maxVideoBWforReassociation OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum video bandwidth to be used for re-association."
DEFVAL { 60 }
::= { wirelessQoS 3 }
-- 1.3.6.1.4.1.4329.15.3.3.3.1.4
maxVideoBWforAssociation OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum video bandwidth to be used for association."
DEFVAL { 40 }
::= { wirelessQoS 4 }
-- 1.3.6.1.4.1.4329.15.3.3.3.1.5
maxBestEffortBWforReassociation OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum best effort bandwidth to be used for reassociation."
DEFVAL { 40 }
::= { wirelessQoS 5 }
-- 1.3.6.1.4.1.4329.15.3.3.3.1.6
maxBestEffortBWforAssociation OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum best effort bandwidth to be used for association."
DEFVAL { 30 }
::= { wirelessQoS 6 }
-- 1.3.6.1.4.1.4329.15.3.3.3.1.7
maxBackgroundBWforReassociation OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum background bandwidth to be used for reassociation. "
DEFVAL { 30 }
::= { wirelessQoS 7 }
-- 1.3.6.1.4.1.4329.15.3.3.3.1.8
maxBackgroundBWforAssociation OBJECT-TYPE
SYNTAX Integer32 (0..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum background bandwidth to be used for association. "
DEFVAL { 20 }
::= { wirelessQoS 8 }
-- 1.3.6.1.4.1.4329.15.3.3.3.2
radiusInfo OBJECT IDENTIFIER ::= { vnsGlobalSetting 2 }
-- 1.3.6.1.4.1.4329.15.3.3.3.2.2
externalRadiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExternalRadiusServerEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Table of external RADIUS servers available for authentication services."
::= { radiusInfo 2 }
-- 1.3.6.1.4.1.4329.15.3.3.3.2.2.1
externalRadiusServerEntry OBJECT-TYPE
SYNTAX ExternalRadiusServerEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Configuration information about the RADIUS server entry."
INDEX { externalRadiusServerName }
::= { externalRadiusServerTable 1 }
ExternalRadiusServerEntry ::=
SEQUENCE {
externalRadiusServerName
DisplayString,
externalRadiusServerAddress
DisplayString,
externalRadiusServerSharedSecret
OCTET STRING,
externalRadiusServerRowStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.1
externalRadiusServerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"RADIUS server name."
::= { externalRadiusServerEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.2
externalRadiusServerAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"RADIUS server address, it can be either string or IP address."
::= { externalRadiusServerEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.3
externalRadiusServerSharedSecret OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..64))
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Shared secret between Radius and the client."
::= { externalRadiusServerEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.4
externalRadiusServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"Row Status for the entry."
::= { externalRadiusServerEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.3.3
dasInfo OBJECT IDENTIFIER ::= { vnsGlobalSetting 3 }
-- 1.3.6.1.4.1.4329.15.3.3.3.3.1
dasPort OBJECT-TYPE
SYNTAX Integer32 (1024..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Dynamic Authorization Server (DAS) port. "
DEFVAL { 3799 }
::= { dasInfo 1 }
-- 1.3.6.1.4.1.4329.15.3.3.3.3.2
dasReplayInterval OBJECT-TYPE
SYNTAX Integer32 (0..1000)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time window for message timeliness and replay protection
for DAS packets. Packets should be dropped that their time
generation is outside of this specified interval.
Value zero indicates that the timeliness checking will be performed."
DEFVAL { 300 }
::= { dasInfo 2 }
-- 1.3.6.1.4.1.4329.15.3.3.3.4
advancedFilteringMode OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Value of 'enabled(1)' means EWC is operating in advanced filtering configuration mode.
Value of 'disabled(0)' means EWC is operating in mode that is compatible with releases
prior to 7.41. This field can only be set to 'enabled(1)' and after setting it to that
value, the only way to undo that is by resetting the database."
::= { vnsGlobalSetting 4 }
-- 1.3.6.1.4.1.4329.15.3.3.3.5
radiusStrictMode OBJECT-TYPE
SYNTAX INTEGER
{
strictModeDisabled(0),
strictModeEnabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this variable set to true, then assignment of RADIUS server(s) to WLAN
are automatic during WLAN creation, otherwise, assignment of RADIUS server(s)
to WLAN must be done manually. "
::= { vnsGlobalSetting 5 }
-- 1.3.6.1.4.1.4329.15.3.3.3.6
radiusFastFailoverEvents OBJECT IDENTIFIER ::= { vnsGlobalSetting 6 }
-- 1.3.6.1.4.1.4329.15.3.3.3.6.1
radiusFastFailoverEventsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusFastFailoverEventsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table in which to configure which RADIUS servers will be sent interim accounting
reports for stations when a fast failover incident occurs "
::= { radiusFastFailoverEvents 1 }
-- 1.3.6.1.4.1.4329.15.3.3.3.6.1.1
radiusFastFailoverEventsEntry OBJECT-TYPE
SYNTAX RadiusFastFailoverEventsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for each radius server."
INDEX { radiusFFOEid }
::= { radiusFastFailoverEventsTable 1 }
RadiusFastFailoverEventsEntry ::=
SEQUENCE {
radiusFFOEid
DisplayString,
fastFailoverEvents
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.3.3.6.1.1
radiusFFOEid OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address or hostname of configured radius server. If the hostname is created from GUI/CLI
and the size is bigger than 64 characters, snmp will display the first 64 characters only. "
::= { radiusFastFailoverEventsEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.3.6.1.2
fastFailoverEvents OBJECT-TYPE
SYNTAX INTEGER
{
fastFailoverEventsDisabled(0),
fastFailoverEventsEnabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, send an interim accounting record to the RADIUS server for each affected
station when a fast failover event occurs. This field can be modified when controller
is operated in availablity paired mode and fast failover is enabled "
::= { radiusFastFailoverEventsEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.3.7
dhcpRelayListeners OBJECT IDENTIFIER ::= { vnsGlobalSetting 7 }
-- 1.3.6.1.4.1.4329.15.3.3.3.7.1
dhcpRelayListenersMaxEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of servers to which DHCP messages are relayed ."
::= { dhcpRelayListeners 1 }
-- 1.3.6.1.4.1.4329.15.3.3.3.7.2
dhcpRelayListenersNumEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of entries in the dhcpRelayListenersTable."
::= { dhcpRelayListeners 2 }
-- 1.3.6.1.4.1.4329.15.3.3.3.7.3
dhcpRelayListenersNextIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates numerically lowest available index within this entity,
which may be used for the value of index in the creation of new entry in
dhcpRelayListenersTable. An index is considered available if the index falls within the
range of 1 to dhcpRelayListenersMaxEntries and it is not being used to index an existing
entry in the dhcpRelayListenersTable contained this entity. This value should only be used
as guideline for the management application and there is no requirement on the
management application to create entries based upon this index value.
Value of zero indicates there is no more room for new dhcpRelayListenersTable creation."
::= { dhcpRelayListeners 3 }
-- 1.3.6.1.4.1.4329.15.3.3.3.7.4
dhcpRelayListenersTable OBJECT-TYPE
SYNTAX SEQUENCE OF DHCPRelayingIPaddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of servers to which DHCP messages are relayed but from which no responses are
expected. "
::= { dhcpRelayListeners 4 }
-- 1.3.6.1.4.1.4329.15.3.3.3.7.4.4.1
dhcpRelayListenersEntry OBJECT-TYPE
SYNTAX DHCPRelayingIPaddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for each dhcpRelayListeners."
INDEX { dhcpRelayListenersID }
::= { dhcpRelayListenersTable 1 }
DHCPRelayingIPaddressEntry ::=
SEQUENCE {
dhcpRelayListenersID
Unsigned32,
dhcpRelayListenersRowStatus
RowStatus,
destinationName
DisplayString,
destinationIP
IpAddress
}
-- 1.3.6.1.4.1.4329.15.3.3.3.7.4.4.1.1
dhcpRelayListenersID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The id corresponds to the 'server number' in the controller GUI and CLI."
::= { dhcpRelayListenersEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.3.7.4.4.1.2
dhcpRelayListenersRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows dynamic creation and deletion of entries within dhcpRelayListenersTable
as well as activation and deactivation of these entries. For row creation, EWC only supports
creatAndWait. "
::= { dhcpRelayListenersEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.3.7.4.4.1.3
destinationName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Text string uniquely identifying NAC Server Name. Allowable characters for this
field are from the set of A-Z, a-z, -_!#$, 0-9, and space. max len is 63 chars Howerver,
it is recommended to avoid leading and trailing spaces."
::= { dhcpRelayListenersEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.3.7.4.4.1.4
destinationIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IPv4 address to which DHCP messages are relayed."
::= { dhcpRelayListenersEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.3.8
clientAutologinOption OBJECT-TYPE
SYNTAX INTEGER
{
hide(0),
redirect(1),
drop(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Many devices such as those made by Apple(R) implement an autologin feature that prompts the user
to login as soon as the device detects the presence of a Captive Portal. This feature sometimes
causes problems for users who actually interact with the captive portal.
hide(0) - Hide the captive portal from Autologin detector.
redirect(1) - Redirect detection messages to the Captive Portal. This option is to allow client autologin
to detect the captive portal & prompt the user to login. This may cause post-authentication
redirection to fail.
drop(2) - Drop detection messages."
::= { vnsGlobalSetting 8 }
-- 1.3.6.1.4.1.4329.15.3.3.3.9
authenticationAdvanced OBJECT IDENTIFIER ::= { vnsGlobalSetting 9 }
-- 1.3.6.1.4.1.4329.15.3.3.3.9.1
includeServiceType OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" Include the Service-Type attribute in client access request messages
when this field is set to enable(1). "
::= { authenticationAdvanced 1 }
-- 1.3.6.1.4.1.4329.15.3.3.3.9.2
clientMessageDelayTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field specifies how long, in seconds, the notice Web page is displayed to the
client when the topology changes as a result of a role change. The notice Web page
indicates that authentication was successful and that the user must close all
browser windows and then restart the browser for access to the network.
Currently this is supported for Internal Captive Portal, Guest Portal, and
Guest Splash. "
::= { authenticationAdvanced 2 }
-- 1.3.6.1.4.1.4329.15.3.3.3.9.3
radiusAccounting OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field enables or disables RADIUS accounting. Disabling RADIUS accounting
overrides the RADIUS accounting settings of individual WLAN Services. Enabling
RADIUS accounting activates RADIUS accounting only in WLAN Services specifically
configured to perform it."
::= { authenticationAdvanced 3 }
-- 1.3.6.1.4.1.4329.15.3.3.3.9.4
serverUsageModel OBJECT-TYPE
SYNTAX INTEGER
{
roundRobin(0),
primaryBackup(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field specifies RADIUS server failover behavior when the primary server goes down.
When the primary server is down the controller moves on to the secondary or tertiary configured RADIUS Servers.
If this field is set to primaryBackup(1), then the controller starts polling the primary RADIUS server to see if it
is up. When the primary RADIUS server comes back, the controller automatically starts sending new access
requests to the primary RADIUS server but pending requests continue with backup RADIUS server.
The administrator can select between the two strategies, i.e. the existing
roundRobin(0) or new primaryBackup(1). This only applies to Authentication, not to Accounting."
::= { authenticationAdvanced 4 }
-- 1.3.6.1.4.1.4329.15.3.3.3.9.5
radacctStartOnIPAddr OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this OID is set to disabled (0) the controller sends a RADIUS accounting
start message as soon as it receives an Access-Accept for the user from a RADIUS
server. When this OID is set to enabled(1) the controller defers sending the
RADIUS accounting start message until an Access-Accept for the client is
received and the client's IP address is known."
::= { authenticationAdvanced 5 }
-- 1.3.6.1.4.1.4329.15.3.3.3.9.6
clientServiceTypeLogin OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this OID is set to enabled(1) the controller sets the Service-Type
attribute of a station's Access-Request to 'Login'. When this OID is set to
disabled(0) the controller sets the Service-Type attribute of a station's
Access-Request to 'Framed'. By default this OID is set to 'disabled'.
You cannot use RADIUS servers to authenticate administrators
for local server access when this OID is set to 'enabled'."
::= { authenticationAdvanced 6 }
-- 1.3.6.1.4.1.4329.15.3.3.3.9.7
applyMacAddressFormat OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this OID is set to enabled(1), the controller uses MAC-Based
Authentication MAC address format (refer to radiusMacAddressFormatOption)
for user authentication and accounting via RADIUS."
::= { authenticationAdvanced 7 }
-- 1.3.6.1.4.1.4329.15.3.3.3.10
radiusExtnsSetting OBJECT IDENTIFIER ::= { vnsGlobalSetting 10 }
-- 1.3.6.1.4.1.4329.15.3.3.3.10.1
radiusExtnsSettingTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadiusExtnsSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of RADIUS servers that will be used. "
::= { radiusExtnsSetting 1 }
-- 1.3.6.1.4.1.4329.15.3.3.3.10.1.1
radiusExtnsSettingEntry OBJECT-TYPE
SYNTAX RadiusExtnsSettingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for each RADIUS server."
INDEX { radiusExtnsIndex }
::= { radiusExtnsSettingTable 1 }
RadiusExtnsSettingEntry ::=
SEQUENCE {
radiusExtnsIndex
Integer32,
pollingMechanism
INTEGER,
serverPollingInterval
Integer32
}
-- 1.3.6.1.4.1.4329.15.3.3.3.10.1.1
radiusExtnsIndex OBJECT-TYPE
SYNTAX Integer32( 1..2147483647 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number uniquely identifying each conceptual row in the radiusExtnsSettingTable.
This value also equivalent to etsysRadiusAuthServerIndex of enterasys-radius-auth-client-mib.txt
file."
::= { radiusExtnsSettingEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.3.10.1.2
pollingMechanism OBJECT-TYPE
SYNTAX INTEGER
{
authorizeAsActualUser(0),
useRFC5997StatusServerRequest(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field specifies the method to determine the health of the RADIUS server. If set to
useRFC5997StatusServerRequest(1), RFC 5997 Status-Server packets will be sent to the
primary server to determine it's health. If set to authorizeAsActualUser(0), access-request
messages for a specified user account will be sent to the primary server to determine it's health."
::= { radiusExtnsSettingEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.3.10.1.3
serverPollingInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval in seconds for the controller to poll the primary server."
::= { radiusExtnsSettingEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.3.1
netflowAndMirrorN OBJECT IDENTIFIER ::= { vnsGlobalSetting 11 }
-- 1.3.6.1.4.1.4329.15.3.3.3.11.1
netflowDestinationIP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address for the Purview engine that will receive netflow records."
::= { netflowAndMirrorN 1 }
-- 1.3.6.1.4.1.4329.15.3.3.3.11.2
netflowInterval OBJECT-TYPE
SYNTAX Integer32 (30..360)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The netflow record sending interval."
DEFVAL { 60 }
::= { netflowAndMirrorN 2 }
-- 1.3.6.1.4.1.4329.15.3.3.3.11.3
mirrorFirstN OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If non-zero, the first N packets of a particular flow will be mirrored. If 0, all packets will be mirrored."
DEFVAL { 15 }
::= { netflowAndMirrorN 3 }
-- 1.3.6.1.4.1.4329.15.3.3.3.11.4
mirrorL2Ports OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure the mirror port(s) on the controller. The default value is None.
Only l2ports will be allowed to be selected and only when not referred to
elsewhere (lag, topologies).
The most significant bit of the most significant octet represents the first esa port (esa0).
The second most significant bit of the most significant octet represents the second esa port (esa1) and so on."
::= { netflowAndMirrorN 4 }
-- 1.3.6.1.4.1.4329.15.3.3.3.12
radiusMacAddressFormatOption OBJECT-TYPE
SYNTAX INTEGER
{
option1(1),
option2(2),
option3(3),
option4(4),
option5(5),
option6(6),
option7(7),
option8(9),
option10(10),
option11(11),
option12(12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The controller allows configuring different kinds of Mac address format in RADIUS messages.
option1: mac address format as XXXXXXXXXXXX
option2: mac address format as XX:XX:XX:XX:XX:XX
option3: mac address format as XX-XX-XX-XX-XX-XX
option4: mac address format as XXXX.XXXX.XXXX
option5: mac address format as XXXXXX-XXXXXX
option6: mac address format as XX XX XX XX XX XX
option7: mac address format as xxxxxxxxxxxx
option8: mac address format as xx:xx:xx:xx:xx:xx
option9: mac address format as xx-xx-xx-xx-xx-xx
option10: mac address format as xxxx.xxxx.xxxx
option11: mac address format as xxxxxx-xxxxxx
option12: mac address format as xx xx xx xx xx xx"
::= { vnsGlobalSetting 12 }
-- 1.3.6.1.4.1.4329.15.3.3.4
wlan OBJECT IDENTIFIER ::= { virtualNetworks 4 }
-- 1.3.6.1.4.1.4329.15.3.3.4.1
wlanMaxEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of WLAN supported by the device."
::= { wlan 1 }
-- 1.3.6.1.4.1.4329.15.3.3.4.2
wlanNumEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of entries in the wlanTable."
::= { wlan 2 }
-- 1.3.6.1.4.1.4329.15.3.3.4.3
wlanTableNextAvailableIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates numerically lowest available index within this entity,
which may be used for the value of index in the creation of new entry in
wlanTable. An index is considered available if the index falls within the
range of 1 to wlanMaxEntries and it is not being used to index an existing
entry in the wlanTable contained this entity. This value should only be used
as guideline for the management application and there is no requirement on the
management application to create entries based upon this index value.
Value of zero indicates there is no more room for new wlanTable creation."
::= { wlan 3 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4
wlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of configured WLAN. "
::= { wlan 4 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1
wlanEntry OBJECT-TYPE
SYNTAX WlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for each WLAN."
INDEX { wlanID }
::= { wlanTable 1 }
WlanEntry ::=
SEQUENCE {
wlanID
Unsigned32,
wlanRowStatus
RowStatus,
wlanServiceType
INTEGER,
wlanName
DisplayString,
wlanSSID
DisplayString,
wlanSynchronize
TruthValue,
wlanEnabled
TruthValue,
wlanDefaultTopologyID
INTEGER,
wlanSessionTimeout
Unsigned32,
wlanIdleTimeoutPreAuth
Unsigned32,
wlanIdleSessionPostAuth
Unsigned32,
wlanSupressSSID
TruthValue,
wlanDot11hSupport
TruthValue,
wlanDot11hClientPowerReduction
TruthValue,
wlanProcessClientIE
TruthValue,
wlanEngerySaveMode
TruthValue,
wlanBlockMuToMuTraffic
TruthValue,
wlanRemoteable
TruthValue,
wlanVNSID
Unsigned32,
wlanRadioManagement11k
INTEGER,
wlanBeaconReport
INTEGER,
wlanQuietIE
INTEGER,
wlanMirrorN
INTEGER,
wlanNetFlow
INTEGER,
wlanAppVisibility
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.1
wlanID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique internal ID associated with WLAN."
::= { wlanEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.2
wlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object allows dynamic creation and deletion of entries within wlanTable as well
as activation and deactivation of these entries. For row creation, EWC only supports
creatAndWait. WLAN name must be set before making the row active and persistent. Any
WLAN that is associated to a VNS cannot be deleted unless it is first disassociated
from VNS before being deleted. Any inactive entry will not be persistent and it will
be lost during controller's restart."
::= { wlanEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.3
wlanServiceType OBJECT-TYPE
SYNTAX INTEGER
{
standard(0),
wds(3),
thirdParty(4),
remote(5),
mesh(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Service type of WLAN."
DEFVAL { standard }
::= { wlanEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.4
wlanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Text string uniquely identifying WLAN within EWC. Allowable characters for this
field are from the set of A-Z, a-z, -!#$:, 0-9, and space. Howerver, it is recommended
to avoid leading and trailing spaces."
::= { wlanEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.5
wlanSSID OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSID (broadcast string) associated with WLAN. Allowable characters for this field are
from the set of A-Z, a-z, _-.@, 0-9, and space. Howerver, it is recommendedto avoid
leading and trailing spaces."
::= { wlanEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.6
wlanSynchronize OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is set to true, then WLAN will be replicated to peer controller if
availability is configured and enabled."
DEFVAL { 1 }
::= { wlanEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.7
wlanEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field is used to enable or disable this WLAN. If WLAN is disabled, then no traffic
will be passed on behalf of this WLAN."
DEFVAL { 1 }
::= { wlanEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.8
wlanDefaultTopologyID OBJECT-TYPE
SYNTAX INTEGER (-1 | 0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ID of topology from topologyTable associated to this WLAN. Topology
ID of -1 means no default topology is associated to this WLAN. Physical
topologies cannot be assigned to WLAN. The default topology indicates which
topology to use for this WLAN if there is no topology associated with VNS via
policy assignment."
::= { wlanEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.9
wlanSessionTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MU session that is associated to this WLAN will be terminated after elapse of this
number of minutes from the start of its current session."
DEFVAL { 0 }
::= { wlanEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.10
wlanIdleTimeoutPreAuth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Elapse time between association and authentication after which MU session will be
terminated if the user is idle this amount of time without being authenticated."
DEFVAL { 5 }
::= { wlanEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.11
wlanIdleSessionPostAuth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MU session that is associated to this WLAN will be terminated if the user is idle this
amount of time after being authenticated."
DEFVAL { 30 }
::= { wlanEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.12
wlanSupressSSID OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is set to true then broadcast string (SSID) for this WLAN will not be broadcasted
over the air."
DEFVAL { 2 }
::= { wlanEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.13
wlanDot11hSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is set to true then dot11h support is enabled for clients associated to this WLAN."
DEFVAL { 2 }
::= { wlanEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.14
wlanDot11hClientPowerReduction OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is set to true then apply power reduction to dot11h clients associated to this WLAN.
This field has meaning if wlanDot11hSupport is enabled (set to true)."
DEFVAL { 2 }
::= { wlanEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.15
wlanProcessClientIE OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is set to true then clients that are associated to this WLAN their IE requests
will be processed."
DEFVAL { 2 }
::= { wlanEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.16
wlanEngerySaveMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is set to true then engergy saving mode is enabled."
DEFVAL { 2 }
::= { wlanEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.17
wlanBlockMuToMuTraffic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is set to true then two MU associated to this WLAN cannot communicate with each
other."
DEFVAL { 2 }
::= { wlanEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.18
wlanRemoteable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is set to true then this WLAN can be used as remote WLAN within mobility zone
that this controller is partaking."
DEFVAL { 2 }
::= { wlanEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.19
wlanVNSID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ID of the VNS that uses this WLAN. WLAN can be created but not used in any
VNS, in that case alue of zero indicates WLAN has not been used in any VNS.
The value of this field set during VNS creation no during the WLAN creation. "
DEFVAL { 0 }
::= { wlanEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.20
wlanRadioManagement11k OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this bit is set to enable, the Radio Management (802.11k) feature is enabled on those
APs who have this wlan configuration and 802.11k capability. "
::= { wlanEntry 20}
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.21
wlanBeaconReport OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable AP to send out beacon report. This field is configurable only if
wlanRadioManagement11k is set to enable(1)."
::= { wlanEntry 21}
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.22
wlanQuietIE OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable AP to advertise a Quiet Element. This field is configurable only if
wlanRadioManagement11k is set to enable(1)."
::= { wlanEntry 22}
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.23
wlanMirrorN OBJECT-TYPE
SYNTAX INTEGER
{
prohibited(0),
bothDirection(1),
rxDirectionOnly(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"prohibited(0): Mirroring is prohibited.
bothDirection(1) : Both direction packets will be mirrored.
rxDirectionOnly(2): Only receive direction packets will be mirrored.
Note: This will only take effect when the user's runtime current Roles's MirrorN action is None. "
::= { wlanEntry 23}
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.24
wlanNetFlow OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable netflow on this WLAN service."
::= { wlanEntry 24}
-- 1.3.6.1.4.1.4329.15.3.3.4.4.1.25
wlanAppVisibility OBJECT-TYPE
SYNTAX INTEGER
{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable both application visibility and control for this WLAN service."
::= { wlanEntry 25}
-- 1.3.6.1.4.1.4329.15.3.3.4.5
wlanStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Stats related to WLAN (RFS) created on EWC."
::= { wlan 5 }
-- 1.3.6.1.4.1.4329.15.3.3.4.5.1
wlanStatsEntry OBJECT-TYPE
SYNTAX WlanStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entery for each existing WLAN on EWC."
INDEX { wlanStatsID }
::= { wlanStatsTable 1 }
WlanStatsEntry ::=
SEQUENCE {
wlanStatsID
Unsigned32,
wlanStatsAssociatedClients
Counter32,
wlanStatsRadiusTotRequests
Counter32,
wlanStatsRadiusReqFailed
Counter32,
wlanStatsRadiusReqRejected
Counter32
}
-- 1.3.6.1.4.1.4329.15.3.3.4.5.1.1
wlanStatsID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique internal ID associated with WLAN."
::= { wlanStatsEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.4.5.1.2
wlanStatsAssociatedClients OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of clients that are currently associated to this WLAN. "
::= { wlanStatsEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.4.5.1.3
wlanStatsRadiusTotRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests that were sent to RADIUS servers associated to this WLAN on behalf
of MUs' requests using SSID associated to the WLAN for association, authentication or
authorization to this WLAN."
::= { wlanStatsEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.4.5.1.4
wlanStatsRadiusReqFailed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests that were sent to RADIUS servers associated to this WLAN on behalf of
MUs' requests for association, authentication or authorization to this WLAN but failed
to be processed by RADIUS servers."
::= { wlanStatsEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.4.5.1.5
wlanStatsRadiusReqRejected OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests that were sent to RADIUS servers associated to this WLAN on behalf of
MUs' requests for association, authentication or authorization to this WLAN but rejected
to be processed by RADIUS servers."
::= { wlanStatsEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6
wlanPrivTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanPrivEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of privacy settings for all configured WLAN on EWC.
For each of the configured WLAN on the controller one entry is added to this table.
Addition/deletion of entries in this table are automatic depending on the addition
or deletion of entries in wlanTable table."
::= { wlan 6 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1
wlanPrivEntry OBJECT-TYPE
SYNTAX WlanPrivEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in wlanPrivTable for each configured WLAN on EWC. Each entry is indexed
with corresponding wlan ID of wlanTable. The writable fields in this table can be
modified depending on the corresponding wlanTable."
INDEX { wlanID }
::= { wlanPrivTable 1 }
WlanPrivEntry ::=
SEQUENCE {
wlanPrivPrivacyType
INTEGER,
wlanPrivWEPKeyIndex
INTEGER,
wlanPrivWEPKeyLength
INTEGER,
wlanPrivWEPKey
DisplayString,
wlanPrivWPAv1EncryptionType
INTEGER,
wlanPrivWPAv2EncryptionType
INTEGER,
wlanPrivKeyManagement
INTEGER,
wlanPrivBroadcastRekeying
TruthValue,
wlanPrivRekeyInterval
Unsigned32,
wlanPrivGroupKPSR
TruthValue,
wlanPrivWPAPSK
OCTET STRING,
wlanPrivWPAversion
INTEGER,
wlanPrivfastTransition
INTEGER,
wlanPrivManagementFrameProtection
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.1
wlanPrivPrivacyType OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
staticWEP(1),
dynamicWEP(2),
wpa(3),
wpaPSK(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of privacy applied to the corresponding configured WLAN. Configuration of
the other fields in this table depends on the value of this field, e.g. if this
field is set to none(0), then no other field in this table are settable. "
::= { wlanPrivEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.2
wlanPrivWEPKeyIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Index of configured WEP.
This field is required if and only if privacy type is staticWEP(1)."
::= { wlanPrivEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.3
wlanPrivWEPKeyLength OBJECT-TYPE
SYNTAX INTEGER
{
sixtyFourBits(1),
oneHundred28Bits(2),
oneHundred52Bits(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key legnth for the configured WEP key.
This field is required if and only if privacy type is staticWEP(1)."
::= { wlanPrivEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.4
wlanPrivWEPKey OBJECT-TYPE
SYNTAX DisplayString (SIZE (8..19))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured WEP key length must match the wlanPrivWEPKeyLength field. Any key
with length longer or shorter than that length will be rejected.
This field is required if and only if privacy type is staticWEP(1).
This key can only be viewed in SNMPv3 mode with privacy."
::= { wlanPrivEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.5
wlanPrivWPAv1EncryptionType OBJECT-TYPE
SYNTAX INTEGER
{
undefined(0),
tkipOnly(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of encryption used for WPA version 1 associations. This OID is undefined unless
wlanPrivPrivacyType is wpa (3) or wpaPSK (4) and wlanPrivWPAversion is set to
wpaV1 (1) or wpaV1andV2 (3)."
::= { wlanPrivEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.6
wlanPrivWPAv2EncryptionType OBJECT-TYPE
SYNTAX INTEGER
{
undefined(0),
auto(2),
aesOnly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of encryption used for WPA version 2 associations. This OID is undefined
unless wlanPrivPrivacyType is wpa (3) or wpaPSK (4) and wlanPrivWPAversion is
set to wpaV2 (2) or wpaV1 and V2 (3)."
::= { wlanPrivEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.7
wlanPrivKeyManagement OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
opportunisticKey(1),
preAuthentication(2),
both(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Key management option available for the WPA2.
This field has meaning if privacy type is WPA with WPA2 option enabled.
This field can be modified only if wlanPrivPrivacyType is set to wpa(3) and
wlanPrivWPAversion set to wpaV2(2) or wpaV1andV2(3).
."
::= { wlanPrivEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.8
wlanPrivBroadcastRekeying OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Broadcast rekeying if this value is set to true.
This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4)."
::= { wlanPrivEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.9
wlanPrivRekeyInterval OBJECT-TYPE
SYNTAX Unsigned32 (30..86400)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval in seconds for requesting rekeying. This field has meaning if privacy
type is WPA and broadcast rekeying is enabled (wlanPrivBroadcastRekeying is set
to true). This field can be modified only if wlanPrivBroadcastRekeying is set to true."
DEFVAL { 3600 }
::= { wlanPrivEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.10
wlanPrivGroupKPSR OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Group Key Power Save Retry (GKPSR) value for the WPA type of privacy.
This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4)."
::= { wlanPrivEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.11
wlanPrivWPAPSK OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WPA-PSK shared key. This field has meaning if and only if WLAN privacy type
is set to WPA-PSK. Input type can be either HEX formatted string or ASCII string.
In case of HEX string, it must be 64 octets from set of hex characters.
In case of ASCII string, the length is limited between 8 to 63 octets.
This key can only be viewed in SNMPv3 mode with privacy.
This field can be modified only if wlanPrivPrivacyType is set to wpaPSK(4)."
::= { wlanPrivEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.12
wlanPrivWPAversion OBJECT-TYPE
SYNTAX INTEGER
{
wpaNone(0),
wpaV1(1),
wpaV2(2),
wpaV1andV2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of wpa version selected. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4).
Note: wpa version v1 only is not allowed.
0 - no wpa version selected.
1 - wpa version v1 selected.
2 - wpa version v2 selected.
3 - both wpa version v1 and v2 selected."
::= { wlanPrivEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.13
wlanPrivfastTransition OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this field is set to enable(1), the 802.11r (fast transition) is enabled.
This field can be modified only if wlanPrivPrivacyType is set to wpa(2)."
::= { wlanPrivEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.3.4.6.1.14
wlanPrivManagementFrameProtection OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1),
require(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable(0) : The AP will not encrypt any management frames.
Enable(1): The AP will encrypt management frames for clients who also support
this feature. If the clients do not support this feature, they are still able to
connect to the AP but with no management frames encryption.
Require(2): The AP will only allow clients who have the PMF feature to connect. Supported
management frames will be encrypted to 802.11w standards. Clients who
do not support this feature will not be able to associate. "
::= { wlanPrivEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7
wlanAuthTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of authentication settings for all configured WLAN
on EWC. For each of the configured WLAN on the controller one entry is added to this
table. Addition/deletion of entries in this table are automatic depending on the
addition/deletion of entries in wlanTable table."
::= { wlan 7 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1
wlanAuthEntry OBJECT-TYPE
SYNTAX WlanAuthEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in wlanAuthTable for each configured WLAN on EWC. Each entry is indexed
with corresponding wlan ID of wlanTable. The writable fields in this table can be
modified depending on the corresponding wlanTable.
Note:
All the fields in this table except wlanAuthType and wlanAuthCollectAcctInformation
have meaning if MAC-based authentication filed (wlanAuthMacBasedAuth) is set to true. "
INDEX { wlanID }
::= { wlanAuthTable 1 }
WlanAuthEntry ::=
SEQUENCE {
wlanAuthType
INTEGER,
wlanAuthMacBasedAuth
TruthValue,
wlanAuthMACBasedAuthOnRoam
TruthValue,
wlanAuthAutoAuthAuthorizedUser
TruthValue,
wlanAuthAllowUnauthorizedUser
TruthValue,
wlanAuthRadiusIncludeAP
TruthValue,
wlanAuthRadiusIncludeVNS
TruthValue,
wlanAuthRadiusIncludeSSID
TruthValue,
wlanAuthRadiusIncludePolicy
TruthValue,
wlanAuthRadiusIncludeTopology
TruthValue,
wlanAuthRadiusIncludeIngressRC
TruthValue,
wlanAuthRadiusIncludeEgressRC
TruthValue,
wlanAuthCollectAcctInformation
TruthValue,
wlanAuthReplaceCalledStationIDWithZone
TruthValue,
wlanAuthRadiusAcctAfterMacBaseAuthorization
TruthValue,
wlanAuthRadiusTimeoutRole
Integer32,
wlanAuthRadiusOperatorNameSpace
INTEGER,
wlanAuthRadiusOperatorName
DisplayString,
wlanAuthMACBasedAuthReAuthOnAreaRoam
TruthValue
}
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.1
wlanAuthType OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
internalCP(2),
dot1x(3),
externalCP(4),
easyGuestCP(5),
guestSplash(6),
firewallFriendlyExCP(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of authentication applied to stations attempting to associate to a BSSID
belonging to this WLAN Service. If the dot1x type is selected, then this WLAN
must have privacy. When the dot1x or internalCP is selected, the controller must
have a RADIUS server, and SNMP will auto assign one RADIUS server to this
WLAN if the user did not assign one."
::= { wlanAuthEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.2
wlanAuthMacBasedAuth OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAC based authorization is enabled if this field is set to true. When this field set to true, SNMP
will auto configure one RADIUS server to enable MAC authorization. "
::= { wlanAuthEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.3
wlanAuthMACBasedAuthOnRoam OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is set to true, the client will be forced to go through MAC based
authorization when the client roamed. This field has meaning only when
wlanAuthMacBasedAuth is set to true. This field can be modified only when
wlanAuthMacBasedAuth is set to true. "
::= { wlanAuthEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.4
wlanAuthAutoAuthAuthorizedUser OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"All authorized users will be considered authenticated automatically. This field
has meaning only when wlanAuthMacBasedAuth is set to true. This field can
be modified only when wlanAuthMacBasedAuth is set to true."
::= { wlanAuthEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.5
wlanAuthAllowUnauthorizedUser OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unauthorized users will be allowed if this field is set to true.This field has meaning only when
wlanAuthMacBasedAuth is set to true. This field can be modified only when
wlanAuthMacBasedAuth is set to true."
::= { wlanAuthEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.6
wlanAuthRadiusIncludeAP OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AP serial number will be included in RADIUS request packet as VSA if this
field is set to true."
::= { wlanAuthEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.7
wlanAuthRadiusIncludeVNS OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VNS name will be included in RADIUS request packet as VSA if this field is set to true."
::= { wlanAuthEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.8
wlanAuthRadiusIncludeSSID OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WLAN SSID will be included in RADIUS request packet as VSA if this
field is set to true."
::= { wlanAuthEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.9
wlanAuthRadiusIncludePolicy OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Policy name will be included in RADIUS request packet as VSA if this
field is set to true."
::= { wlanAuthEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.10
wlanAuthRadiusIncludeTopology OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Topology name will be included in RADIUS request packet as VSA if this
field is set to true."
::= { wlanAuthEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.11
wlanAuthRadiusIncludeIngressRC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ingress rate control name will be included in RADIUS request packet as VSA if this
field is set to true."
::= { wlanAuthEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.12
wlanAuthRadiusIncludeEgressRC OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Egress rate control name will be included in RADIUS request packet as VSA if this
field is set to true."
::= { wlanAuthEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.13
wlanAuthCollectAcctInformation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Accounting information is collected for clients if this field is set to true."
::= { wlanAuthEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.14
wlanAuthReplaceCalledStationIDWithZone OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Replace called station ID with Zone if this field is set to true."
::= { wlanAuthEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.15
wlanAuthRadiusAcctAfterMacBaseAuthorization OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS accounting begins after MAC-based authorization completes if this field is set to true.
This field has meaning only when wlanAuthMacBasedAuth is set to true.
This field can be modified only when wlanAuthMacBasedAuth is set to true."
::= { wlanAuthEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.16
wlanAuthRadiusTimeoutRole OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Apply this role to clients when the RADIUS server timed out.
'-1' is treat like access reject. Any other number is the Role ID. This field has meaning only when
wlanAuthMacBasedAuth is set to true. This field can be modified only when
wlanAuthMacBasedAuth is set to true."
::= { wlanAuthEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.17
wlanAuthRadiusOperatorNameSpace OBJECT-TYPE
SYNTAX INTEGER
{
disabled(-1),
tadig(48),
realm(49),
e212(50),
icc(51)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"wlanAuthRadiusOperatorNameSpace is the Namespace ID as defined in RFC 5580. The value within this field contains
the operator namespace identifier. The Namespace ID value is encoded in ASCII and has the following
values.
-1 : disabled.
48 : TADIG.
49 : REALM.
50 : E212.
51 : ICC. "
::= { wlanAuthEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.18
wlanAuthRadiusOperatorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RADIUS accounting message will include this string when the wlanAuthRadiusOperatorNameSpace is not
set to -1."
::= { wlanAuthEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.3.4.7.1.19
wlanAuthMACBasedAuthReAuthOnAreaRoam OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this field is set to true, the client will be forced to go through MAC based
authorization when the client roams to another area. This field has meaning
and can be modified only when wlanAuthMacBasedAuth is set to true. "
::= { wlanAuthEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8
wlanRadiusTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanRadiusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of RADIUS settings for all configured WLAN on EWC.
For each of the configured WLAN on the controller there may exist one or more entries
of RADIUS server(s) serving the WLAN. Addition/deletion of entries in this table are
automatic depending on the addition/deletion of entries in wlanTable table."
::= { wlan 8 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1
wlanRadiusEntry OBJECT-TYPE
SYNTAX WlanRadiusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in wlanRadiusTable for each RADIUS server used by the WLAN indexed by wlanID."
INDEX { wlanID, wlanRadiusIndex }
::= { wlanRadiusTable 1 }
WlanRadiusEntry ::=
SEQUENCE {
wlanRadiusIndex
Unsigned32,
wlanRadiusName
DisplayString,
wlanRadiusUsage
INTEGER,
wlanRadiusPriority
Integer32,
wlanRadiusPort
Unsigned32,
wlanRadiusRetries
Unsigned32,
wlanRadiusTimeout
Unsigned32,
wlanRadiusNASUseVnsIP
TruthValue,
wlanRadiusNASIP
DisplayString,
wlanRadiusNASIDUseVNSName
TruthValue,
wlanRadiusNASID
DisplayString,
wlanRadiusAuthType
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.1
wlanRadiusIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internally generated index and it has no external meaning."
::= { wlanRadiusEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.2
wlanRadiusName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name of the RADIUS server associated to this entry."
::= { wlanRadiusEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.3
wlanRadiusUsage OBJECT-TYPE
SYNTAX INTEGER
{
auth(1),
mac(2),
acc(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Usage type associated to this entry for authentication."
::= { wlanRadiusEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.4
wlanRadiusPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Priority associated to this entry for authentication. RADIUS servers are contacted
for authentication requests in the order of their priority defined in this field.
The highest priority servers (priorities with lower numerical values have higher
priority order) are consulted first for any authentication request."
::= { wlanRadiusEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.5
wlanRadiusPort OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The RADIUS authentication requests should be sent to this authentication port."
DEFVAL { 1812 }
::= { wlanRadiusEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.6
wlanRadiusRetries OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of retries attempted for an specific authentication request."
DEFVAL { 3 }
::= { wlanRadiusEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.7
wlanRadiusTimeout OBJECT-TYPE
SYNTAX Unsigned32 (1..360)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of seconds to wait for a response from authentication server for each
request sent to the server before considering the request as failure."
DEFVAL { 5 }
::= { wlanRadiusEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.8
wlanRadiusNASUseVnsIP OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this value is set to true, then VNS IP address associated to the WLAN indexed
by wlanID to this entry is used as NAS IP address. Otherwise NAS IP address should be
configured manually."
::= { wlanRadiusEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.9
wlanRadiusNASIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NAS IP associated to this RADIUS server. Configuration of this field is directly
affected by the value of wlanRadiusNASUseVnsIP."
::= { wlanRadiusEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.10
wlanRadiusNASIDUseVNSName OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this value is set to true, then use VNS name associated to the WLAN indexed
by wlanID for this entry as NAS ID. Otherwise NAS ID should be configured manually."
::= { wlanRadiusEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.11
wlanRadiusNASID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"NAS ID associated to this RADIUS server. Configuration of this field is directly
affected by the value of wlanRadiusNASIDUseVNSName."
::= { wlanRadiusEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.12
wlanRadiusAuthType OBJECT-TYPE
SYNTAX INTEGER
{
pap(0),
chap(1),
mschap(2),
mschap2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication type used for this WLAN when using this RADIUS server to
authenticate users."
DEFVAL { pap }
::= { wlanRadiusEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9
wlanCPTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of Captive Portal settings for all configured WLAN
on EWC. For each of the configured WLAN on the controller one entry is added to this
table. Addition/deletion of entries in this table are automatic depending on the
addition/deletion of entries in wlanTable table. This table can be accessed using SNMPv3 on
behalf of users with privacy."
::= { wlan 9 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1
wlanCPEntry OBJECT-TYPE
SYNTAX WlanCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in wlanCPTable for each configured WLAN on EWC. Each entry is indexed
with corresponding wlan ID of wlanTable. The writable fields in this table can be
modified depending on the corresponding wlanTable and type of CP assigned to the
WLAN. If the authentication type is 'disabled(0)' for the WLAN, then all other entries in
this table have no meaning."
INDEX { wlanID }
::= { wlanCPTable 1 }
WlanCPEntry ::=
SEQUENCE {
wlanCPAuthType
INTEGER,
wlanCP802HttpRedirect
TruthValue,
wlanCPExtConnection
IpAddress,
wlanCPExtPort
Unsigned32,
wlanCPExtEnableHttps
TruthValue,
wlanCPExtEncryption
INTEGER,
wlanCPExtSharedSecret
OCTET STRING,
wlanCPExtTosOverride
TruthValue,
wlanCPExtTosValue
Unsigned32,
wlanCPExtAddIPtoURL
TruthValue,
wlanCPIntLogoffButton
TruthValue,
wlanCPIntStatusCheckButton
TruthValue,
wlanCPReplaceIPwithFQDN
DisplayString,
wlanCPSendLoginTo
INTEGER,
wlanCPRedirectURL
DisplayString,
wlanCPGuestAccLifetime
Unsigned32,
wlanCPGuestAllowedLifetimeAcct
TruthValue,
wlanCPGuestSessionLifetime
Unsigned32,
wlanCPGuestIDPrefix
DisplayString,
wlanCPGuestMinPassLength
Unsigned32,
wlanCPGuestMaxConcurrentSession
Unsigned32,
wlanCPUseHTTPSforConnection
TruthValue,
wlanCPIdentity
DisplayString,
wlanCPCustomSpecificURL
DisplayString,
wlanCPSelectionOption
BITS
}
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.1
wlanCPAuthType OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
internalCP(2),
dot1x(3),
externalCP(4),
easyGuestCP(5),
guestSplash(6),
firewallFriendlyExCP(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of authentication applied to MU requesting association using SSID associated
to this WLAN."
::= { wlanCPEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.2
wlanCP802HttpRedirect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is set to true, then CP will be redirected to configured CP. This value
has meaning only for CP of the type 'dot1x(3)'."
::= { wlanCPEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.3
wlanCPExtConnection OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the interface for this CP."
::= { wlanCPEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.4
wlanCPExtPort OBJECT-TYPE
SYNTAX Unsigned32 (32768..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The port associated to the CP IP address."
::= { wlanCPEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.5
wlanCPExtEnableHttps OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"HTTPS support is enabled if this field is set to true."
::= { wlanCPEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.6
wlanCPExtEncryption OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
legacy(1),
aes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of encryption for the CP."
::= { wlanCPEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.7
wlanCPExtSharedSecret OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Shared secret used for this captive portal."
::= { wlanCPEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.8
wlanCPExtTosOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Override ToS of NAC server usage only."
DEFVAL { false }
::= { wlanCPEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.9
wlanCPExtTosValue OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"ToS value for NAC server only."
::= { wlanCPEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.10
wlanCPExtAddIPtoURL OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this value is set to true, then add EWC IP address and port number to the redirection URL."
::= { wlanCPEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.11
wlanCPIntLogoffButton OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true provide 'Logoff' button to the user in CP page."
::= { wlanCPEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.12
wlanCPIntStatusCheckButton OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true provide 'Status Check' button to the user in CP page."
::= { wlanCPEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.13
wlanCPReplaceIPwithFQDN OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Replace CP gateway IP address with FQDN."
::= { wlanCPEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.14
wlanCPSendLoginTo OBJECT-TYPE
SYNTAX INTEGER
{
originalDestination(0),
cpSessionPage(1),
customURL(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field indicates to what URL the successful login session must be redirected.
This field qualifies wlanCPRedirectURL."
::= { wlanCPEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.15
wlanCPRedirectURL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Text string identifying default redirection URL."
::= { wlanCPEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.16
wlanCPGuestAccLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "days"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value indicates for how many days the guest account is valid. Value of zero
indicates that there is no limit for the guest account."
::= { wlanCPEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.17
wlanCPGuestAllowedLifetimeAcct OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this value is set to true, then guest admin can obtain lifetime account."
::= { wlanCPEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.18
wlanCPGuestSessionLifetime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "hours"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The guess account session using this CP cannot last longer than this number of
hours. Value of zero means there is no limit for the session."
::= { wlanCPEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.19
wlanCPGuestIDPrefix OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The prefix used for guest portal user ID label."
::= { wlanCPEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.20
wlanCPGuestMinPassLength OBJECT-TYPE
SYNTAX Unsigned32 (1..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Minimum password length for the guest user account associated to this WLAN."
DEFVAL { 8 }
::= { wlanCPEntry 20 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.21
wlanCPGuestMaxConcurrentSession OBJECT-TYPE
SYNTAX Unsigned32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of the guest users can use this set of credentials to access this concurrent session."
DEFVAL { 8 }
::= { wlanCPEntry 21 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.22
wlanCPUseHTTPSforConnection OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this value set to true, use HTTPS for user connection. It has meaning only when wlanCPAuthType is set to
internalCP(2) or easyGuestCP(5) or guestSplash(6) "
::= { wlanCPEntry 22 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.23
wlanCPIdentity OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"wlanCPIdentity is used to identify the EWC to the external captive portal server (ECP)
and the ECP to the EWC."
::= { wlanCPEntry 23 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.24
wlanCPCustomSpecificURL OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"After a user successfully logs in, the user will be redirected to the URL as defined in the
wlanCPCustomSpecificURL."
::= { wlanCPEntry 24 }
-- 1.3.6.1.4.1.4329.15.3.3.4.9.1.25
wlanCPSelectionOption OBJECT-TYPE
SYNTAX BITS
{
addEWCPortAndIP(0),
apNameAndSerial(1),
associatedBSSID(2),
vnsName(3),
userMacAddress(4),
currentlyAssignedRole(5),
containmentVLAN(6),
timeStamp(7),
signature(8),
ssid(9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Append the above parameter(s) to the EWC captive portal redirection URL if one or more of the bits are set. "
::= { wlanCPEntry 25 }
-- 1.3.6.1.4.1.4329.15.3.3.4.10
wlanUnsecuredWlanCounts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of WLAN with security issues. The details of security issues
can be found in wlanSecurityReportTable."
::= { wlan 10 }
-- 1.3.6.1.4.1.4329.15.3.3.4.11
wlanSecurityReportTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanSecurityReportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the weak configuration settings for all configured WLAN on EWC.
For each of the configured WLAN on the controller there exist one entry in this table.
Addition/deletion of entries in this table are automatic depending on the addition
or deletion of entries in wlanTable table. This table can be accessed using SNMPv3 on
behalf of users with privacy."
::= { wlan 11 }
-- 1.3.6.1.4.1.4329.15.3.3.4.11.1
wlanSecurityReportEntry OBJECT-TYPE
SYNTAX WlanSecurityReportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in wlanSecurityReportTable for each configured WLAN on EWC. Each entry is indexed
with corresponding wlan ID of wlanTable."
INDEX { wlanID }
::= { wlanSecurityReportTable 1 }
WlanSecurityReportEntry ::=
SEQUENCE {
wlanSecurityReportFlag
INTEGER,
wlanSecurityReportUnsecureType
BITS,
wlanSecurityReportNotes
DisplayString
}
-- 1.3.6.1.4.1.4329.15.3.3.4.11.1.1
wlanSecurityReportFlag OBJECT-TYPE
SYNTAX INTEGER
{
unsecureSetting(1),
secureSetting(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Value of secureSetting(2) indicates that WLAN has secure configuration."
::= { wlanSecurityReportEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.4.11.1.2
wlanSecurityReportUnsecureType OBJECT-TYPE
SYNTAX BITS
{
open(0),
wep(1),
tkip(2),
defaultSsid(3),
hotspotSsid(4),
rainbowSsid(5),
dictionaryWordKey(6),
dictionaryWordSubstring(7),
passwordTooShort(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"bit 0: by setting this bit means this WLAN does not use any kind of encryption
bit 1: by setting this bit means this WLAN uses weak WEP encryption
bit 2: by setting this bit means this WLAN uses weak tkip encryption
bit 3: by setting this bit means this WLAN uses default SSID
bit 4: by setting this bit means this WLAN uses HotSpot SSID
bit 5: by setting this bit means this WLAN uses Rainbow SSID
bit 6: by setting this bit means this WLAN uses dictionary word as an encryption key
bit 7: by setting this bit means this WLAN uses dictionary word in an encryption key string
bit 8: by setting this bit means this WLAN uses a short password key"
::= { wlanSecurityReportEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.4.11.1.3
wlanSecurityReportNotes OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Textual description of any security issues related to the WLAN is reflected in this field."
::= { wlanSecurityReportEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12
wlanRadiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF WlanRadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains configuration of RADIUS Servers settings for all configured WLANs on the Wireless Controller.
For each of the configured WLANs on the controller there may exist one or more entries
of RADIUS server(s) serving the WLAN. Addition/deletion of entries in this table are
automatic depending on the addition/deletion of entries in wlanTable table."
::= { wlan 12 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1
wlanRadiusServerEntry OBJECT-TYPE
SYNTAX WlanRadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in wlanRadiusServerTable for each RADIUS server used by the WLAN indexed by wlanID and radiusId.
The radiusId is the controller's internal radius server index."
INDEX { wlanID, radiusId }
::= { wlanRadiusServerTable 1 }
WlanRadiusServerEntry ::=
SEQUENCE {
radiusId
Unsigned32,
wlanRadiusServerName
DisplayString,
wlanRadiusServerUse
Integer32,
wlanRadiusServerUsage
BITS,
wlanRadiusServerAuthUseVNSIPAddr
TruthValue,
wlanRadiusServerAuthNASIP
DisplayString,
wlanRadiusServerAuthUseVNSName
TruthValue,
wlanRadiusServerAuthNASId
DisplayString,
wlanRadiusServerAuthAuthType
Integer32,
wlanRadiusServerAcctUseVNSIPAddr
TruthValue,
wlanRadiusServerAcctNASIP
DisplayString,
wlanRadiusServerAcctUseVNSName
TruthValue,
wlanRadiusServerAcctNASId
DisplayString,
wlanRadiusServerAcctSIAR
Integer32,
wlanRadiusServerMacUseVNSIPAddr
TruthValue,
wlanRadiusServerMacNASIP
DisplayString,
wlanRadiusServerMacUseVNSName
TruthValue,
wlanRadiusServerMacNASId
DisplayString,
wlanRadiusServerMacAuthType
Integer32,
wlanRadiusServerMacPW
DisplayString
}
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.1
radiusId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Controller's internal RADIUS index."
::= { wlanRadiusServerEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.2
wlanRadiusServerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the RADIUS server."
::= { wlanRadiusServerEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.3
wlanRadiusServerUse OBJECT-TYPE
SYNTAX INTEGER
{
notUse(0),
use(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"use : This means that this WLAN service indexed by wlanID uses this RADIUS server which it is indexed by the radiusId. "
::= { wlanRadiusServerEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.4
wlanRadiusServerUsage OBJECT-TYPE
SYNTAX BITS
{
auth(0),
mac(1),
acct(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"bit 0: By setting this bit, this RADIUS server is used for authentication. This bit has meaning only when wlanAuthType is set to internalCP(2),
dot1x(3), or externalCP(4).
bit 1: By setting this bit, this RADIUS server is used for MAC-based authentication. This bit has meaning only when
wlanAuthMacBasedAuth is set to true.
bit 2: By setting this bit, this RADIUS server is used for accounting. This bit has meaning only when wlanAuthType is set to internalCP(2), dot1x(3),
or externalCP(4)."
::= { wlanRadiusServerEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.5
wlanRadiusServerAuthUseVNSIPAddr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this value set to true, use the VNS's IP address as NAS IP address during the authentication."
::= { wlanRadiusServerEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.6
wlanRadiusServerAuthNASIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use this IP address as the NAS IP addresss during the authentication. The default IP address is the VNS IP address.
This field has meaning only when the wlanRadiusServerUsage's bit 0 is set. "
::= { wlanRadiusServerEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.7
wlanRadiusServerAuthUseVNSName OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this value set to true, use the VNS's name as the NAS identifier during the authentication."
::= { wlanRadiusServerEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.8
wlanRadiusServerAuthNASId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use this name as the NAS identifier during the authentication. The default name is the VNS name.
This field has meaning only when the wlanRadiusServerUsage's bit 0 is set."
::= { wlanRadiusServerEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.9
wlanRadiusServerAuthAuthType OBJECT-TYPE
SYNTAX INTEGER
{
pap(0),
chap(1),
mschap(2),
mschap2(3),
eap(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication type.
This field has meaning only when the wlanRadiusServerUsage's bit 0 is set."
::= { wlanRadiusServerEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.10
wlanRadiusServerAcctUseVNSIPAddr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this value set to true, use the VNS's IP address as NAS IP address during the accounting."
::= { wlanRadiusServerEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.11
wlanRadiusServerAcctNASIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use this IP address as the NAS IP addresss during the accounting. The default IP address is the VNS IP address.
This field has meaning only when the wlanRadiusServerUsage's bit 2 is set."
::= { wlanRadiusServerEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.12
wlanRadiusServerAcctUseVNSName OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this value set to true, use the VNS's name as the NAS identifier during the accounting."
::= { wlanRadiusServerEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.13
wlanRadiusServerAcctNASId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use this name as the NAS identifier during the accounting. The default name is the VNS name.
This field has meaning only when the wlanRadiusServerUsage's bit 2 is set."
::= { wlanRadiusServerEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.3.4.8.1.14
wlanRadiusServerAcctSIAR OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this value is set to true, then the controller sends interrim accounting records for fast failover events.
This field has meaning only when the wlanRadiusServerUsage's bit 2 is set."
::= { wlanRadiusServerEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.15
wlanRadiusServerMacUseVNSIPAddr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this value set to true, use the VNS's IP address as NAS IP address during the MAC based authentication."
::= { wlanRadiusServerEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.16
wlanRadiusServerMacNASIP OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use this IP address as the NAS IP addresss during the MAC based authentication. The default IP address is the VNS IP address.
This field has meaning only when the wlanRadiusServerUsage's bit 1 is set."
::= { wlanRadiusServerEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.17
wlanRadiusServerMacUseVNSName OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this value set to true, use the VNS's name as the NAS identifier during the MAC based authentication."
::= { wlanRadiusServerEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.18
wlanRadiusServerMacNASId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Use this name as the NAS identifier during the MAC based authentication. The default name is the VNS name.
This field has meaning only when the wlanRadiusServerUsage's bit 1 is set."
::= { wlanRadiusServerEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.19
wlanRadiusServerMacAuthType OBJECT-TYPE
SYNTAX INTEGER
{
pap(0),
chap(1),
mschap(2),
mschap2(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication type.
This field has meaning only when the wlanRadiusServerUsage's bit 1 is set."
::= { wlanRadiusServerEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.3.4.12.1.20
wlanRadiusServerMacPW OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The password is used for MAC based authentication.
This field has meaning only when the wlanRadiusServerUsage's bit 1 is set."
::= { wlanRadiusServerEntry 20 }
-- 1.3.6.1.4.1.4329.15.3.4
topology OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 4 }
-- 1.3.6.1.4.1.4329.15.3.4.1
topologyConfig OBJECT IDENTIFIER ::= { topology 1 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1
topologyTable OBJECT-TYPE
SYNTAX SEQUENCE OF TopologyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of topologies configured on EWC."
::= { topologyConfig 1 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1
topologyEntry OBJECT-TYPE
SYNTAX TopologyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration information about a topology in topology table. EWC supports different
types of topologies, therefore, for complete configuration of a topology not all fields
are necessary to be defined or have meaning. Definition of each field in this table
specifies topolog-specific characteristics of the field and its relevance."
INDEX { topologyID }
::= { topologyTable 1 }
TopologyEntry ::=
SEQUENCE {
topologyID
Unsigned32,
topologyName
DisplayString,
topologyMode
INTEGER,
topologyTagged
INTEGER,
topologyVlanID
Integer32,
topologyEgressPort
OCTET STRING,
topologyLayer3
TruthValue,
topologyIPAddress
IpAddress,
topologyIPMask
IpAddress,
topologyMTUsize
Unsigned32,
topologyGateway
IpAddress,
topologyDHCPUsage
INTEGER,
topologyAPRegistration
TruthValue,
topologyManagementTraffic
TruthValue,
topologySynchronize
TruthValue,
topologySyncGateway
IpAddress,
topologySyncMask
IpAddress,
topologySyncIPStart
IpAddress,
topologySyncIPEnd
IpAddress,
topologyStaticIPv6Address
DisplayString,
topologyLinkLocalIPv6Address
DisplayString,
topologyPreFixLength
Unsigned32,
topologyIPv6Gateway
DisplayString,
topologyDynamicEgress
INTEGER,
topologyIsGroup
INTEGER,
topologyGroupMembers
OCTET STRING,
topologyMemberId
Integer32
}
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.1
topologyID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unique internal identifier of the topology. This item is generated
internally by EWC and has no external meaning."
::= { topologyEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.2
topologyName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name associated with topology. This name must be unique within EWC. Allowable
characters for this field are from the set of A-Z, a-z, -!#$:, 0-9, and space.
Howerver, it is recommended to avoid leading and trailing spaces."
::= { topologyEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.3
topologyMode OBJECT-TYPE
SYNTAX INTEGER
{
undefined(-1),
routed(0),
bridgedAtAP(1),
bridgedAtAC(2),
thirdPartyAP(4),
physical(5),
management(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of this topology. This field implies the meaning and necessity of
other attributes associated to the topology."
::= { topologyEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.4
topologyTagged OBJECT-TYPE
SYNTAX INTEGER
{
tagged(1),
untagged(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If topology is tagged, then a VLAN ID must be assigned to the topology.
Meaning associated to this field is topology specific:
- For Admin topology (management port) is always untagged
- Ror routed topology has no meaning and always untagged
- For all other topologies this field is configurable."
::= { topologyEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.5
topologyVlanID OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..4095)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN ID assigned to a tagged topology. For untagged topology this field has no meaning
and it is set to -1."
DEFVAL { -1 }
::= { topologyEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.6
topologyEgressPort OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..12))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Egress port associated to this topology if it is tagged and VLANID defined
for the topology. This field is represented as octect string:
The most significant bit of most significant octet represent first physical
port (lowest number port) and second most significant bit of most
significant octet represent second physical port and so on.
Meaning associated to this field is topology specific:
- For Admin topology (management port) this field has no meaning.
- Ror routed topology this field has no meaning
- For all other topologies: physical, bridge at controller, and bridge at AP
topologies this field is configurable."
::= { topologyEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.7
topologyLayer3 OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true, then topology has layer three persence. Any topology
with layer three presence must have IP address and gateway assigned to it.
Meaning associated to this field is topology specific:
- For Admin topology (management port) it is always set to true.
- Ror bridge at AP this field has no meaning and it is set to false.
- For routed and physical topologies it is always set to true.
- For bridge at controller type of topology this field is configurable."
::= { topologyEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.8
topologyIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address assigned to the topology as its interface.
Meaning associated to this field is topology specific:
- This field has meaning if topology has layer three presence.
- Ror bridge at AP this field has no meaning and set 0.0.0.0."
::= { topologyEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.9
topologyIPMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mask for topology's IP address. This field is only applicable to those
topologies that have IP address assigned to them, otherwise it is set either
to 255.255.255.255 or 0.0.0.0."
::= { topologyEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.10
topologyMTUsize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Default MTU size for the topology. This field is only configurable for a
topologies that has layer three presence."
DEFVAL { 1436 }
::= { topologyEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.11
topologyGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Gateway associated to this topology. This field has meaning for a topology
that has layer three presence."
::= { topologyEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.12
topologyDHCPUsage OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
useRelay(1),
localServer(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of DHCP to be used for IP address assignment to associated MU.
This field has meaning only if the topology has layer three persense.
Meaning associated to this field is topology specific:
- For Admin topology (management port) has no meaning.
- Ror bridge at AP this field has no meaning.
- For all other topologies that their layer three presence is enabled this
field is configurable."
::= { topologyEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.13
topologyAPRegistration OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true, then AP registration can be achieved using via this topology.
Meaning associated to this field is topology specific:
- Always false for Admin (management port) and routed topologies
- Always false and has no meaning for bridge at AP topology.
- For physical and bridge at controller type topologies that have layer three
presence this field can be set to either true or false."
::= { topologyEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.14
topologyManagementTraffic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true, then management data traffic is allowed on this topology.
Meaning associated to this field is topology specific:
- Always true for Admin topology (management port)
- Has no meaning for bridge at AP type topologies
- For all other topologies that have layer three presence this field can be
set to either true or false."
::= { topologyEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.15
topologySynchronize OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to true, then topology must be synchronized with peer controller
in availability mode operation.
Meaning associated to this field is topology specific:
- Always false for Admin topology (management port)
- Has no meaning for topologies associated to physical ports.
- For all other topologies: bridge at controller, routed and bridge at AP
type topologies this field can be set to either true or false."
::= { topologyEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.16
topologySyncGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Gateway associated to synchronized topology. This field has meaning for
those topologies that their topologySynchornize field is set to true."
::= { topologyEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.17
topologySyncMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mask of synchronized gateway IP address. This field has meaning for
those topologies that their topologySynchornize field is set to true."
::= { topologyEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.18
topologySyncIPStart OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Range of IP addresses assigned to remote synchronized topology. This IP
address represents starting IP address. This field has meaning for those
topologies that their topologySynchornize field is set to true."
::= { topologyEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.19
topologySyncIPEnd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Range of IP addresses assigned to remote synchronized topology. This IP
address represents ending IP address. This field has meaning for those
topologies that their topologySynchornize field is set to true."
::= { topologyEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.20
topologyStaticIPv6Address OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Statically configured IPv6 address assigned to the admin port."
::= { topologyEntry 20 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.21
topologyLinkLocalIPv6Address OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Automatically generated link-local IPv6 address assigned to the admin port."
::= { topologyEntry 21 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.22
topologyPreFixLength OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The prfix length of the statically configured IPv6 address of the topology."
::= { topologyEntry 22 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.23
topologyIPv6Gateway OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The gateway of IPv6 address that is associated to the admin topology."
::= { topologyEntry 23 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.24
topologyDynamicEgress OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable/disable dynamic egress for this topology. Dynamic egress allows a station to
receive from this VLAN if it can send to this VLAN."
::= { topologyEntry 24 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.25
topologyIsGroup OBJECT-TYPE
SYNTAX INTEGER
{
no(0),
yes(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When this flag is yes, this means the
topology is created as a group topology."
::= { topologyEntry 25 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.26
topologyGroupMembers OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..12))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field specifies the topologies for this group. This field has meaning only when topologyIsGroup is set to 1.
This field is represented as octect string.
The most significant bit of the most significant octet of the octet string represents the first topology with topologyID = 0
and second most significant bit of the most significant octet represents the second topology with
topologyID = 1 and so on."
::= { topologyEntry 26 }
-- 1.3.6.1.4.1.4329.15.3.4.1.1.1.27
topologyMemberId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" -1 : Means this topology is not a member of a group topology.
valid topology ID : Means this topology is a member of a configured group topology that has
this group topology ID."
::= { topologyEntry 27 }
-- 1.3.6.1.4.1.4329.15.3.4.2
topologyStat OBJECT IDENTIFIER ::= { topology 2 }
-- 1.3.6.1.4.1.4329.15.3.4.2.1
topoStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF TopoStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics describing traffic transmitted or received for a single topology.
This is the traffic on the topology that is coming from or going to
destinations on the wired network."
::= { topologyStat 1 }
-- 1.3.6.1.4.1.4329.15.3.4.2.1.1
topoStatEntry OBJECT-TYPE
SYNTAX TopoStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistic related an entry in topology table."
INDEX { topologyID }
::= { topoStatTable 1 }
TopoStatEntry ::=
SEQUENCE {
topoStatName
DisplayString,
topoStatTxPkts
Counter64,
topoStatRxPkts
Counter64,
topoStatTxOctets
Counter64,
topoStatRxOctets
Counter64,
topoStatMulticastTxPkts
Counter64,
topoStatMulticastRxPkts
Counter64,
topoStatBroadcastTxPkts
Counter64,
topoStatBroadcastRxPkts
Counter64,
topoStatFrameChkSeqErrors
Counter64,
topoStatFrameTooLongErrors
Counter64
}
-- 1.3.6.1.4.1.4329.15.3.4.2.1.1.1
topoStatName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Topology name."
::= { topoStatEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.4.2.1.1.2
topoStatTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets transmitted to the wired
network on the topology/vlan."
::= { topoStatEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.4.2.1.1.3
topoStatRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received from the wired
network on the topology/vlan."
::= { topoStatEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.4.2.1.1.4
topoStatTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted in frames to
the wired network on the topology/vlan."
::= { topoStatEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.4.2.1.1.5
topoStatRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received in frames from the wired
network on the topology/vlan."
::= { topoStatEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.4.2.1.1.6
topoStatMulticastTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of multicast frames transmitted to
the wired network on the topology/vlan."
::= { topoStatEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.4.2.1.1.7
topoStatMulticastRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of multicast frames received from
the wired network on the topology/vlan."
::= { topoStatEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.4.2.1.1.8
topoStatBroadcastTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of broadcast frames transmitted to
the wired network on the topology/vlan."
::= { topoStatEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.4.2.1.1.9
topoStatBroadcastRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of broadcast frames received from
the wired network on the topology/vlan."
::= { topoStatEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.4.2.1.1.10
topoStatFrameChkSeqErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of frames with checksum errors received
from the wired network on the topology/vlan."
::= { topoStatEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.4.2.1.1.11
topoStatFrameTooLongErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of oversized frames received from
the wired network on the topology/vlan."
::= { topoStatEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.4.2.2
topoExceptionStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF TopoExceptionStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains list of exception-specific filters statistics for configured
topologies in EWC."
::= { topologyStat 2 }
-- 1.3.6.1.4.1.4329.15.3.4.2.2.1
topoExceptionStatEntry OBJECT-TYPE
SYNTAX TopoExceptionStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in topology exception statistic table."
INDEX { topologyID }
::= { topoExceptionStatTable 1 }
TopoExceptionStatEntry ::=
SEQUENCE {
topoExceptionFiterName
OCTET STRING,
topoExceptionStatPktsDenied
Counter64,
topoExceptionStatPktsAllowed
Counter64
}
-- 1.3.6.1.4.1.4329.15.3.4.2.2.1.1
topoExceptionFiterName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Exception filter name."
::= { topoExceptionStatEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.4.2.2.1.2
topoExceptionStatPktsDenied OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets that were denied by defined filters since device's last restart."
::= { topoExceptionStatEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.4.2.2.1.3
topoExceptionStatPktsAllowed OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number packets that were allowed by defined filters since device's last restart."
::= { topoExceptionStatEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.4.2.3
topoWireStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF TopoWireStatEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The table contains statistics describing traffic transmitted or received
unencapsulated (i.e. not wrapped in WASSP) for each topology"
::= { topologyStat 3 }
-- 1.3.6.1.4.1.4329.15.3.4.2.3.1
topoWireStatEntry OBJECT-TYPE
SYNTAX TopoWireStatEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Statistics describing traffic transmitted or received unencapsulated (i.e. not wrapped in WASSP)
for a single topology. This is the traffic on the topology that is coming from or going to destinations
on the wired network other than to the controller's APs."
INDEX { topologyID }
::= { topoWireStatTable 1 }
TopoWireStatEntry ::=
SEQUENCE {
topoWireStatName
DisplayString,
topoWireStatTxPkts
Counter64,
topoWireStatRxPkts
Counter64,
topoWireStatTxOctets
Counter64,
topoWireStatRxOctets
Counter64,
topoWireStatMulticastTxPkts
Counter64,
topoWireStatMulticastRxPkts
Counter64,
topoWireStatBroadcastTxPkts
Counter64,
topoWireStatBroadcastRxPkts
Counter64,
topoWireStatFrameChkSeqErrors
Counter64,
topoWireStatFrameTooLongErrors
Counter64
}
-- 1.3.6.1.4.1.4329.15.3.4.2.3.1.1
topoWireStatName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Topology name."
::= { topoWireStatEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.4.2.3.1.2
topoWireStatTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of packets transmitted unencapsulated to
the wired network on the topology/vlan."
::= { topoWireStatEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.4.2.3.1.3
topoWireStatRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of packets received unencapsulated from
the wired network on the topology/vlan."
::= { topoWireStatEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.4.2.3.1.4
topoWireStatTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of octets transmitted in unencapsulated frames
to the wired network on the topology/vlan."
::= { topoWireStatEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.4.2.3.1.5
topoWireStatRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of octets received in unencapsulated frames
to the wired network on the topology/vlan."
::= { topoWireStatEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.4.2.3.1.6
topoWireStatMulticastTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of multicast frames transmitted unencapsulated
to the wired network on the topology/vlan."
::= { topoWireStatEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.4.2.3.1.7
topoWireStatMulticastRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of multicast frames received unencapsulated
from the wired network on the topology/vlan."
::= { topoWireStatEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.4.2.3.1.8
topoWireStatBroadcastTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of broadcast frames transmitted unencapsulated
to the wired network on the topology/vlan."
::= { topoWireStatEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.4.2.3.1.9
topoWireStatBroadcastRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of broadcast frames received unencapsulated from
the wired network on the topology/vlan."
::= { topoWireStatEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.4.2.3.1.10
topoWireStatFrameChkSeqErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of unencapsulated frames with checksum errors
received from the wired network on the topology/vlan."
::= { topoWireStatEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.4.2.3.1.11
topoWireStatFrameTooLongErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Number of unencapsulated frames with length longer than
permitted received from the wired network on the topology/vlan."
::= { topoWireStatEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.4.2.4
topoCompleteStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF TopoCompleteStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table contains statistics describing traffic transmitted
and received for each topology on both the wired side and
the wireless side."
::= { topologyStat 4 }
-- 1.3.6.1.4.1.4329.15.3.4.2.4.1
topoCompleteStatEntry OBJECT-TYPE
SYNTAX TopoCompleteStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics describing traffic transmitted and received on
a single topology on both the wired side and the wireless side."
INDEX { topologyID }
::= { topoCompleteStatTable 1 }
TopoCompleteStatEntry ::=
SEQUENCE {
topoCompleteStatName
DisplayString,
topoCompleteStatTxPkts
Counter64,
topoCompleteStatRxPkts
Counter64,
topoCompleteStatTxOctets
Counter64,
topoCompleteStatRxOctets
Counter64,
topoCompleteStatMulticastTxPkts
Counter64,
topoCompleteStatMulticastRxPkts
Counter64,
topoCompleteStatBroadcastTxPkts
Counter64,
topoCompleteStatBroadcastRxPkts
Counter64,
topoCompleteStatFrameChkSeqErrors
Counter64,
topoCompleteStatFrameTooLongErrors
Counter64
}
-- 1.3.6.1.4.1.4329.15.3.4.2.4.1.1
topoCompleteStatName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Topology name."
::= { topoCompleteStatEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.4.2.4.1.2
topoCompleteStatTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets transmitted to the wired and
wireless networks on the topology/vlan."
::= { topoCompleteStatEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.4.2.4.1.3
topoCompleteStatRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received from the wired and
wireless networks on the topology/vlan."
::= { topoCompleteStatEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.4.2.4.1.4
topoCompleteStatTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted in frames to the wired
and wireless networks on the topology/vlan."
::= { topoCompleteStatEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.4.2.4.1.5
topoCompleteStatRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received in frames from the wired
and wireless networks on the topology/vlan."
::= { topoCompleteStatEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.4.2.4.1.6
topoCompleteStatMulticastTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of multicast frames transmitted to the wired
and wireless networks on the topology/vlan."
::= { topoCompleteStatEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.4.2.4.1.7
topoCompleteStatMulticastRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of multicast frames received from the wired
and wireless networks on the topology/vlan."
::= { topoCompleteStatEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.4.2.4.1.8
topoCompleteStatBroadcastTxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of broadcast frames transmitted to the wired
and wireless networks on the topology/vlan."
::= { topoCompleteStatEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.4.2.4.1.9
topoCompleteStatBroadcastRxPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of broadcast frames received from the wired
and wireless networks on the topology/vlan."
::= { topoCompleteStatEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.4.2.4.1.10
topoCompleteStatFrameChkSeqErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of frames with checksum errors received from
the wired and wireless networks on the topology/vlan."
::= { topoCompleteStatEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.4.2.4.1.11
topoCompleteStatFrameTooLongErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of oversized frames received from the wired
and wireless networks on the topology/vlan."
::= { topoCompleteStatEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.5
accessPoints OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 5 }
-- 1.3.6.1.4.1.4329.15.3.5.1
apConfigObjects OBJECT IDENTIFIER ::= { accessPoints 1 }
-- 1.3.6.1.4.1.4329.15.3.5.1.1
apCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of currently configured AccessPoints associated with this WirelessController."
::= { apConfigObjects 1 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2
apTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a list of all configured APs associated with the Wireless Controller."
::= { apConfigObjects 2 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1
apEntry OBJECT-TYPE
SYNTAX ApEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration information for an access point."
INDEX { apIndex }
::= { apTable 1 }
ApEntry ::=
SEQUENCE {
apIndex
Integer32,
apName
DisplayString,
apDesc
DisplayString,
apSerialNumber
OCTET STRING,
apPortifIndex
InterfaceIndex,
apWiredIfIndex
InterfaceIndex,
apSoftwareVersion
OCTET STRING,
apSpecific
OBJECT IDENTIFIER,
apBroadcastDisassociate
TruthValue,
apRowStatus
RowStatus,
apVlanID
Integer32,
apIpAssignmentType
INTEGER,
apIfMAC
MacAddress,
apIPAddress
IpAddress,
apHwVersion
DisplayString,
apSwVersion
DisplayString,
apEnvironment
INTEGER,
apHome
INTEGER,
apRole
INTEGER,
apState
INTEGER,
apStatus
INTEGER,
apPollTimeout
Gauge32,
apPollInterval
Gauge32,
apTelnetAccess
INTEGER,
apMaintainClientSession
TruthValue,
apRestartServiceContAbsent
TruthValue,
apHostname
DisplayString,
apLocation
DisplayString,
apStaticMTUsize
Unsigned32,
apSiteID
Integer32,
apZone
DisplayString,
apLLDP
TruthValue,
apSSHAccess
TruthValue,
apLEDMode
INTEGER,
apLocationbasedService
TruthValue,
apSecureTunnel
TruthValue,
apEncryptCntTraffic
TruthValue,
apMICErrorWarning
TruthValue,
apSecureDataTunnelType
INTEGER,
apIPMulticastAssembly
TruthValue,
apSSHConnection
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.1
apIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Table index for the access point."
::= { apEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.2
apName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Access Point's name."
::= { apEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.3
apDesc OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Text description of the AP."
::= { apEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.4
apSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"16-character serial number of the AccessPoint."
::= { apEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.5
apPortifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ifIndex of the physical port to which this AP is assigned."
::= { apEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.6
apWiredIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ifIndex of the wired interface on the AP."
::= { apEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.7
apSoftwareVersion OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Software version currently installed on the AP."
::= { apEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.8
apSpecific OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A link back to the OID under the hiPathWirelessProducts
branch that identifies the specific version of this AP."
::= { apEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.9
apBroadcastDisassociate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"True indicates that the AP should broadcast
disassociation requests, False indicates unicast."
::= { apEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.10
apRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus for the apTable."
::= { apEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.11
apVlanID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"VLAN tag for the packets trasmitted to/from Access Point.
Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value."
DEFVAL { -1 }
::= { apEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.12
apIpAssignmentType OBJECT-TYPE
SYNTAX INTEGER
{
dhcp(1),
static(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address assignment type, dhcp(1) = uses DHCP to obtain IP address,
static(2) = static IP address is assigned to the access point."
::= { apEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.13
apIfMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Acess Point's wired interface MAC address."
::= { apEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.14
apIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Access Point's wired interface IP address."
::= { apEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.17
apHwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Text description of Access Point's hardware version."
::= { apEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.18
apSwVersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Text description of Access Point's major software version."
::= { apEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.19
apEnvironment OBJECT-TYPE
SYNTAX INTEGER
{
indoor(1),
outdoor(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Access Point's environment."
::= { apEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.20
apHome OBJECT-TYPE
SYNTAX INTEGER
{
local(1),
foreign(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Local session is created when access point registers directly with the controller.
Foreign session is mirrored session created via availability feature."
::= { apEntry 20 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.21
apRole OBJECT-TYPE
SYNTAX INTEGER
{
accessPoint(1),
sensor(2),
guardian(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether Access Point is a traffic fordwarder, sensor or guardian"
::= { apEntry 21 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.22
apState OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
inactive(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Active means that access point has registered with this controller at some point of
time and still has active connection with this controller. This variable has meaning
in the context of the controller that query is done. Inactive mean access point has
lost the connection with this controller."
::= { apEntry 22 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.23
apStatus OBJECT-TYPE
SYNTAX INTEGER
{
approved(1),
pending(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Registration state for the access point at the time of query, approved(1) means the
registration was completed, pending(2) means access point has registered but waiting
manual approval from admin."
::= { apEntry 23 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.24
apPollTimeout OBJECT-TYPE
SYNTAX Gauge32 (3..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Duration after which the access point's connection to controller is
considered has been lost if polling fails.
"
::= { apEntry 24 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.25
apPollInterval OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between each poll sent to the controller."
::= { apEntry 25 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.26
apTelnetAccess OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
na(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether telnet access is enabled/disabled. This value only applys to AP26xx, W788, W786 and AP4102x APs.
1 : Enabled.
2 : Disabled.
3 : Telnet is not supported."
::= { apEntry 26 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.27
apMaintainClientSession OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, Access Point maintains client's session in the event of poll failure."
::= { apEntry 27 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.28
apRestartServiceContAbsent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If true, Access Point restarts the service in the absence of controller."
::= { apEntry 28 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.29
apHostname OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hostname assigned to Access Point."
::= { apEntry 29 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.30
apLocation OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Text identifying location of the access point."
::= { apEntry 30 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.31
apStaticMTUsize OBJECT-TYPE
SYNTAX Unsigned32 (600..1500)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configured MTU size for the access point. Access point will use the lower value of
MTU size between statically configured MTU size and dynamically learned MTU size."
DEFVAL { 1500 }
::= { apEntry 31 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.32
apSiteID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The site ID, as defined in siteTable, that this AP is member of. The value of -1
indicates that AP is not member of any site."
DEFVAL { -1 }
::= { apEntry 32 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.33
apZone OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Zone to which the Access Point belongs. "
::= { apEntry 33 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.34
apLLDP OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable broadcasting of LLDP information by the wireless AP."
::= { apEntry 34 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.35
apSSHAccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Enable or Disable SSH access to the Wireless AP. This value only applys to AP36xx,
AP37xx, W788C and W786C APs."
::= { apEntry 35 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.36
apLEDMode OBJECT-TYPE
SYNTAX INTEGER
{
off(0),
wdsSignalStrength(1),
identify(2),
normal(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"LED status field for the Access Point.
off(0): LED is set to off for the AP.
wdsSignalStrength(1): LED conveys the strength of the singal, for the details please refer to user manual.
indentify(2): Can be used to lacate the AP by making AP to flashing LED repeatedly.
normal(3): This indicates AP's normal operational mode."
::= { apEntry 36 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.37
apLocationbasedService OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the AeroScout or Ekahau location-based service for the Wireless AP."
::= { apEntry 37 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.38
apSecureTunnel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable Secure Tunnel between Ap and Controller"
::= { apEntry 38 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.39
apEncryptCntTraffic OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable encrypt of control traffic between AP & Controller.
This value has meaning only if apSecureTunnel is enabled."
::= { apEntry 39 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.40
apMICErrorWarning OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable MIC error warning generation."
::= { apEntry 40 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.41
apSecureDataTunnelType OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
encryptControlTraffic(1),
encryptControlDataTraffic(2),
debugMode(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"secure data tunnel status between controller and acesss point.
disable(0): disable encryption of control and data traffic between AP & Controller.
encryptControlTraffic(1): encrypt control traffic between AP & Controller.
encryptControlDataTraffic(2): encrypt control and data traffic between AP & Controller.
debugMode(3): preserve keys without encryption."
::= { apEntry 41 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.42
apIPMulticastAssembly OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable fragmentation/reassembly of the IP Multicast frames transmitted over
the tunnel between AP and Controller. When set to true, an IP Multicast frame larger
than the tunnel MTU will be fragmented when it is placed into the WASSP tunnel and
reassembled on the receiving end of the tunnel before being forwarded to the clients."
::= { apEntry 42 }
-- 1.3.6.1.4.1.4329.15.3.5.1.2.1.43
apSSHConnection OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2),
na(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or Disable SSH access to the Wireless AP. This value only applys to AP36xx,
AP37xx, W788C and W786C APs.
1 : Enabled.
2 : Disabled.
3 : SSH is not supported."
::= { apEntry 43 }
-- 1.3.6.1.4.1.4329.15.3.5.1.3
apRadioTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table access point radio configuration information."
::= { apConfigObjects 3 }
-- 1.3.6.1.4.1.4329.15.3.5.1.3.1
apRadioEntry OBJECT-TYPE
SYNTAX ApRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration information for a radio on the access point."
INDEX { apIndex, ifIndex }
::= { apRadioTable 1 }
ApRadioEntry ::=
SEQUENCE {
apRadioFrequency
INTEGER,
apRadioNumber
Unsigned32,
apRadioType
INTEGER,
apRadioProtocol
BITS
}
-- 1.3.6.1.4.1.4329.15.3.5.1.3.1.1
apRadioFrequency OBJECT-TYPE
SYNTAX INTEGER
{
freq50GHz(1),
freq24GHz(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frequency of the radio as supported by the hardware. Supported frequencies are
either of 2.5Ghz or 5.0Ghz."
::= { apRadioEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.1.3.1.2
apRadioNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Access point radios are numbered from 1 in increasing order. This numbering is limited
in the context of AP. This field returns the radio number of the AP indexed by apIndex."
::= { apRadioEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.1.3.1.3
apRadioType OBJECT-TYPE
SYNTAX INTEGER
{
off(0),
dot11a(1),
dot11an(2),
dot11anStrict(3),
dot11b(4),
dot11g(5),
dot11bg(6),
dot11gn(7),
dot11bgn(8),
dot11gnStrict(9),
dot11j(10),
dot11anc(11),
dot11cStrict(12)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Indicates the type of radio (a, a/n, a/c, n-strict, c-strict, b, g, b/g, or b/g/n) as it is configured."
::= { apRadioEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.1.3.1.4
apRadioProtocol OBJECT-TYPE
SYNTAX BITS
{
dot1124b(0),
dot1124g(1),
dot1124n(2),
dot1150a(3),
dot1150ac(4),
dot1150j(5),
dot1150n(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enumerates the possible types of 802.11 radio protocols."
::= { apRadioEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.5.1.4
radioVNSTable OBJECT-TYPE
SYNTAX SEQUENCE OF RadioVNSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of VNSs the radio is participating in."
::= { apConfigObjects 4 }
-- 1.3.6.1.4.1.4329.15.3.5.1.4.1
radioVNSEntry OBJECT-TYPE
SYNTAX RadioVNSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a single VNS entry."
INDEX { radioIfIndex, vnsIfIndex }
::= { radioVNSTable 1 }
RadioVNSEntry ::=
SEQUENCE {
radioIfIndex
InterfaceIndex,
vnsIfIndex
InterfaceIndex,
radioVNSRowStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.5.1.4.1.1
radioIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Radio participating in the VNS."
::= { radioVNSEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.1.4.1.2
vnsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ifIndex for the VNS the radio is participating."
::= { radioVNSEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.1.4.1.3
radioVNSRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"RowStatus for the radioVNSTable."
::= { radioVNSEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.1.5
apFastFailoverEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"True indicates that Fast Failover feature is enabled at AP."
::= { apConfigObjects 5 }
-- 1.3.6.1.4.1.4329.15.3.5.1.6
apLinkTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Time to deteck link failure. The value is in 1-30 seconds."
::= { apConfigObjects 6 }
-- 1.3.6.1.4.1.4329.15.3.5.1.7
apAntennaTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApAntennaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a list of antennas configured for each AP associated with the
Wireless Controller. All elements in this table are predefined and read-only."
::= { apConfigObjects 7 }
-- 1.3.6.1.4.1.4329.15.3.5.1.7.1
apAntennaEntry OBJECT-TYPE
SYNTAX ApAntennaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table identifying attributes of one antenna for an AP."
INDEX { apIndex, apAntennaIndex }
::= { apAntennaTable 1 }
ApAntennaEntry ::=
SEQUENCE {
apAntennaIndex
Unsigned32,
apAntennanName
DisplayString,
apAntennaType
DisplayString
}
-- 1.3.6.1.4.1.4329.15.3.5.1.7.1.1
apAntennaIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of an antenna inside an AP."
::= { apAntennaEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.1.7.1.2
apAntennanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Textual description identifying the antenna."
::= { apAntennaEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.1.7.1.3
apAntennaType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Textual description of antenna type selected for that antenna."
::= { apAntennaEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.1.8
apRadioAntennaTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApRadioAntennaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains a list of Radio configured for each AP associated with the
Wireless Controller. All elements in this table are predefined and read-only."
::= { apConfigObjects 8 }
-- 1.3.6.1.4.1.4329.15.3.5.1.8.1
apRadioAntennaEntry OBJECT-TYPE
SYNTAX ApRadioAntennaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table identifying attributes of one radio for an AP."
INDEX { apIndex, ifIndex }
::= { apRadioAntennaTable 1 }
ApRadioAntennaEntry ::=
SEQUENCE {
apRadioAntennaType
DisplayString,
apRadioAntennaModel
Unsigned32,
apRadioAttenuation
Integer32
}
-- 1.3.6.1.4.1.4329.15.3.5.1.8.1.3
apRadioAntennaType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Textual description of antenna type selected for that radio."
::= { apRadioAntennaEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.1.8.1.4
apRadioAntennaModel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Antenna type. 0 indicates internal antenna. 1 indicates no antenna.
Other value indicates specific external antenna type. "
::= { apRadioAntennaEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.5.1.8.1.5
apRadioAttenuation OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Cumulative attenuation (in dB) of all components (cables, attenuators) between
the radio port and the antenna. A professional installer must configure this value
so it does not violate country regulations and must verify that it reflects the actual
installed components. If this field value is set to -1, then this radio does not support the
attenuation configuration."
::= { apRadioAntennaEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.5.2
apStatsObjects OBJECT IDENTIFIER ::= { accessPoints 2 }
-- 1.3.6.1.4.1.4329.15.3.5.2.1
apActiveCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of active AccessPoints associated with this WirelessController."
::= { apStatsObjects 1 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2
apStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of statistics for the access points."
::= { apStatsObjects 2 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1
apStatsEntry OBJECT-TYPE
SYNTAX ApStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Statistics for an access point."
INDEX { apIndex }
::= { apStatsTable 1 }
ApStatsEntry ::=
SEQUENCE {
apInUcastPkts
Counter64,
apInNUcastPkts
Counter64,
apInOctets
Counter64,
apInErrors
Counter64,
apInDiscards
Counter64,
apOutUcastPkts
Counter64,
apOutNUcastPkts
Counter64,
apOutOctets
Counter64,
apOutErrors
Counter64,
apOutDiscards
Counter64,
apUpTime
TimeTicks,
apCredentialType
INTEGER,
apCertificateExpiry
TimeTicks,
apStatsMuCounts
Unsigned32,
apStatsSessionDuration
TimeTicks,
apTotalStationsA
Unsigned32,
apTotalStationsB
Unsigned32,
apTotalStationsG
Unsigned32,
apTotalStationsN50
Unsigned32,
apTotalStationsN24
Unsigned32,
apInvalidPolicyCount
Unsigned32,
apInterfaceMTU
Unsigned32,
apEffectiveTunnelMTU
Unsigned32,
apTotalStationsAC
Unsigned32,
apTotalStationsAInOctets
Counter64,
apTotalStationsAOutOctets
Counter64,
apTotalStationsBInOctets
Counter64,
apTotalStationsBOutOctets
Counter64,
apTotalStationsGInOctets
Counter64,
apTotalStationsGOutOctets
Counter64,
apTotalStationsN50InOctets
Counter64,
apTotalStationsN50OutOctets
Counter64,
apTotalStationsN24InOctets
Counter64,
apTotalStationsN24OutOctets
Counter64,
apTotalStationsACInOctets
Counter64,
apTotalStationsACOutOctets
Counter64
}
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.1
apInUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unicast packets from wireless-to-wired network."
::= { apStatsEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.2
apInNUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of non-unicast packets from wireless-to-wired network."
::= { apStatsEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.3
apInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from wireless-to-wired network."
::= { apStatsEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.4
apInErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of error packets from wireless-to-wired network."
::= { apStatsEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.5
apInDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of discarded packets from wireless-to-wired network."
::= { apStatsEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.6
apOutUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of unicast packets from wired-to-wireless network."
::= { apStatsEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.7
apOutNUcastPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of non-unicast packets from wired-to-wireless network."
::= { apStatsEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.8
apOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from wired-to-wireless network."
::= { apStatsEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.9
apOutErrors OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of error packets from wired-to-wireless network."
::= { apStatsEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.10
apOutDiscards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of discarded packets from wired-to-wireless network."
::= { apStatsEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.11
apUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the
management portion of the access point was last
re-initialized."
::= { apStatsEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.12
apCredentialType OBJECT-TYPE
SYNTAX INTEGER
{
none(0),
tls(1),
peap(2),
all(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Supported certificate type used by AP for commnuication.
none(0) = not supported,
TLS(1) = Trasport Layer Security (TLS),
PEAP(2) = Protected Extensible Authentication Protocol,
all(2) = supports all supported EAP."
::= { apStatsEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.13
apCertificateExpiry OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of timeticks from January, 1st, 1970 to the date when
the certificate expires (issued certificate no longer is valid)."
::= { apStatsEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.14
apStatsMuCounts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MUs currently associated with this AP."
::= { apStatsEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.15
apStatsSessionDuration OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Elapse time since the access point's session has started."
::= { apStatsEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.16
apTotalStationsA OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MUs that are currently associated to this AP using dot11 connection mode 'a'."
::= { apStatsEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.17
apTotalStationsB OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MUs that are currently associated to this AP using dot11 connection mode 'b'."
::= { apStatsEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.18
apTotalStationsG OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MUs that are currently associated to this AP using dot11 connection mode 'g'."
::= { apStatsEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.19
apTotalStationsN50 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MUs that are currently associated to this AP using dot11 connection mode 'n 5.0 Ghz'."
::= { apStatsEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.20
apTotalStationsN24 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MUs that are currently associated to this AP using dot11 connection mode 'n 2.4 Ghz'."
::= { apStatsEntry 20 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.21
apInvalidPolicyCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of invalid role has been assigned to the AP"
::= { apStatsEntry 21 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.22
apInterfaceMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AP's configured ethernet interface MTU size in bytes. "
::= { apStatsEntry 22 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.23
apEffectiveTunnelMTU OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The AP Effective Tunnel MTU determines the maximum length of the frames that can
be tunnelled without fragmentation, after subtracting the tunnel headers (WASSP and IPSEC).
The AP Effective Tunnel MTU is determined for each AP tunnel as minimum between
the Static MTU (configurable) and Dynamic MTU (learned from the ICMP path discovery)."
::= { apStatsEntry 23 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.24
apTotalStationsAC OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of MUs that are currently associated to this AP using dot11ac connection mode."
::= { apStatsEntry 24 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.25
apTotalStationsAInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from client to AP for clients using protocol 802.11a."
::= { apStatsEntry 25 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.26
apTotalStationsAOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from AP to client for clients using protocol 802.11a."
::= { apStatsEntry 26 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.27
apTotalStationsBInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from client to AP for clients using protocol 802.11b."
::= { apStatsEntry 27 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.28
apTotalStationsBOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from AP to client for clients using protocol 802.11b."
::= { apStatsEntry 28 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.29
apTotalStationsGInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from client to AP for clients using protocol 802.11g."
::= { apStatsEntry 29 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.30
apTotalStationsGOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from AP to client for clients using protocol 802.11g."
::= { apStatsEntry 30 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.31
apTotalStationsN50InOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from client to AP for clients using protocol 802.11n (5Ghz)."
::= { apStatsEntry 31 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.32
apTotalStationsN50OutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from AP to client for clients using protocol 802.11n (5Ghz)."
::= { apStatsEntry 32 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.33
apTotalStationsN24InOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from client to AP for clients using protocol 802.11n (2.4Ghz)."
::= { apStatsEntry 33 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.34
apTotalStationsN24OutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from AP to client for clients using protocol 802.11n (2.4Ghz)."
::= { apStatsEntry 34 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.35
apTotalStationsACInOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from client to AP for clients using protocol 802.11ac."
::= { apStatsEntry 35 }
-- 1.3.6.1.4.1.4329.15.3.5.2.2.1.36
apTotalStationsACOutOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets from AP to client for clients using protocol 802.11ac."
::= { apStatsEntry 36 }
-- 1.3.6.1.4.1.4329.15.3.5.2.3
apRegistrationRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total registration request have been received by all access points
since last reboot."
::= { apStatsObjects 3 }
-- 1.3.6.1.4.1.4329.15.3.5.2.4
apRadioStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApRadioStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of radio configuration attributes that the AP can change dynamically.
It contains one entry for each radio of each active AP."
::= { apStatsObjects 4 }
-- 1.3.6.1.4.1.4329.15.3.5.2.4.1
apRadioStatusEntry OBJECT-TYPE
SYNTAX ApRadioStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration attributes of one AP radio that the AP can change dynamically."
INDEX { ifIndex}
::= { apRadioStatusTable 1 }
ApRadioStatsEntry ::=
SEQUENCE {
apRadioStatusChannel
Unsigned32,
apRadioStatusChannelWidth
INTEGER,
apRadioStatusChannelOffset
Unsigned32
}
-- 1.3.6.1.4.1.4329.15.3.5.2.4.1.1
apRadioStatusChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest 20 MHz channel of the 20/40/80 MHz wide channel on which the radio is
operating. This can be different from the administratively configured channel as a result
of the AP complying with regulatory requirements like DFS or adapting to the RF
environment (e.g. DCS). If this field value is set to 0, then this means this radio is off or this AP is
in Guardian mode."
::= { apRadioStatusEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.2.4.1.2
apRadioStatusChannelWidth OBJECT-TYPE
SYNTAX INTEGER {
width20Mhz(1),
width40Mhz(2),
width80Mhz(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum width of the channel being served by the AP's radio. The AP may select a
different channel width from the administratively configured width in order to comply
with regulatory requirements and the current RF environment."
::= { apRadioStatusEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.2.4.1.3
apRadioStatusChannelOffset OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the offset (in 20 MHz channels) of the primary channel from the lowest 20 MHz
channel within an aggregated channel. The offset can be 0 if the primary channel is the
same as the lowest channel or it can be 1,2 or 3 depending on the aggregate channel width.
The AP may select a different channel width from the administratively configured width in
order to comply with regulatory requirements and the current RF environment."
::= { apRadioStatusEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5
apPerformanceReportByRadioTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApPerformanceReportByRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of AP performance statistics by radio that the AP can change dynamically.
It contains one entry for each radio of each active AP."
::= { apStatsObjects 5 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1
apPerformanceReportByRadioEntry OBJECT-TYPE
SYNTAX ApPerformanceReportByRadioEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The AP radio performance statistics of one AP radio."
INDEX {apIndex, apRadioIndex}
::= { apPerformanceReportByRadioTable 1 }
ApPerformanceReportByRadioEntry ::=
SEQUENCE {
apRadioIndex
Integer32,
apPerfRadioPrevPeakChannelUtilization
Gauge32,
apPerfRadioCurPeakChannelUtilization
Gauge32,
apPerfRadioAverageChannelUtilization
HundredthOfGauge32,
apPerfRadioCurrentChannelUtilization
Gauge32,
apPerfRadioPrevPeakRSS
Gauge32,
apPerfRadioCurPeakRSS
Gauge32,
apPerfRadioAverageRSS
HundredthOfInt32,
apPerfRadioCurrentRSS
Gauge32,
apPerfRadioPrevPeakSNR
Gauge32,
apPerfRadioCurPeakSNR
Gauge32,
apPerfRadioAverageSNR
HundredthOfInt32,
apPerfRadioCurrentSNR
Gauge32,
apPerfRadioPrevPeakPktRetx
HundredthOfGauge64,
apPerfRadioCurPeakPktRetx
HundredthOfGauge64,
apPerfRadioAveragePktRetx
HundredthOfGauge64,
apPerfRadioCurrentPktRetx
HundredthOfGauge64,
apPerfRadioPktRetx
Counter64
}
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.1
apRadioIndex OBJECT-TYPE
SYNTAX Integer32(1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index of an radio inside an AP."
::= { apPerformanceReportByRadioEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.2
apPerfRadioPrevPeakChannelUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak channel utilization in % from last 15 minute interval."
::= { apPerformanceReportByRadioEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.3
apPerfRadioCurPeakChannelUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak channel utilization in % of current 15 minute interval."
::= { apPerformanceReportByRadioEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.4
apPerfRadioAverageChannelUtilization OBJECT-TYPE
SYNTAX HundredthOfGauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of channel utilization in hundredth of a %."
::= { apPerformanceReportByRadioEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.5
apPerfRadioCurrentChannelUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel utilization in % from latest statistics from AP."
::= { apPerformanceReportByRadioEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.6
apPerfRadioPrevPeakRSS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak RSS in dBm from last 15 minute interval. Value of -100 means this field is not available."
::= { apPerformanceReportByRadioEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.7
apPerfRadioCurPeakRSS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak RSS in dBm of current 15 minute interval. Value of -100 means this field is not available."
::= { apPerformanceReportByRadioEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.8
apPerfRadioAverageRSS OBJECT-TYPE
SYNTAX HundredthOfInt32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of RSS in hundredth of a dBm. Value of -10000 means this field is not available."
::= { apPerformanceReportByRadioEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.9
apPerfRadioCurrentRSS OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RSS in dBm from latest statistics from AP. Value of -100 means this field is not available."
::= { apPerformanceReportByRadioEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.10
apPerfRadioPrevPeakSNR OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak SNR in dB from last 15 minute interval. Value of -100 means this field is not available."
::= { apPerformanceReportByRadioEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.11
apPerfRadioCurPeakSNR OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak SNR in dB of current 15 minute interval. Value of -100 means this field is not available."
::= { apPerformanceReportByRadioEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.12
apPerfRadioAverageSNR OBJECT-TYPE
SYNTAX HundredthOfInt32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of SNR in hundredth of a dB. Value of -10000 means this field is not available."
::= { apPerformanceReportByRadioEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.13
apPerfRadioCurrentSNR OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR in dB from latest statistics from AP. Value of -100 means this field is not available."
::= { apPerformanceReportByRadioEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.14
apPerfRadioPrevPeakPktRetx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak packet retransmissions in hundredth of pps from last 15 minute interval."
::= { apPerformanceReportByRadioEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.15
apPerfRadioCurPeakPktRetx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak packet retransmissions in hundredth of pps of current 15 minute interval."
::= { apPerformanceReportByRadioEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.16
apPerfRadioAveragePktRetx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of packet retransmissions in hundredth of pps."
::= { apPerformanceReportByRadioEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.17
apPerfRadioCurrentPktRetx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet retransmissions in hundredth of pps from latest statistics from AP."
::= { apPerformanceReportByRadioEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.5.2.5.1.18
apPerfRadioPktRetx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running counter of number of packet retransmissions."
::= { apPerformanceReportByRadioEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6
apAccessibilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApAccessibilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table showing the rate of associations, reassociations and
deauthentications/dissassociations from each AP radio. The
table contains one row per radio per active AP."
::= { apStatsObjects 6 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1
apAccessibilityEntry OBJECT-TYPE
SYNTAX ApAccessibilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The accessibility statistics of one AP radio."
INDEX {apIndex, apRadioIndex}
::= { apAccessibilityTable 1 }
ApAccessibilityEntry ::=
SEQUENCE {
apAccPrevPeakAssocReqRx
HundredthOfGauge64,
apAccCurPeakAssocReqRx
HundredthOfGauge64,
apAccAverageAssocReqRx
HundredthOfGauge64,
apAccCurrentAssocReqRx
HundredthOfGauge64,
apAccAssocReqRx
Counter64,
apAccPrevPeakReassocReqRx
HundredthOfGauge64,
apAccCurPeakReassocReqRx
HundredthOfGauge64,
apAccAverageReassocReqRx
HundredthOfGauge64,
apAccCurrentReassocReqRx
HundredthOfGauge64,
apAccReassocReqRx
Counter64,
apAccPrevPeakDisassocDeauthReqTx
HundredthOfGauge64,
apAccCurPeakDisassocDeauthReqTx
HundredthOfGauge64,
apAccAverageDisassocDeauthReqTx
HundredthOfGauge64,
apAccCurrentDisassocDeauthReqTx
HundredthOfGauge64,
apAccDisassocDeauthReqTx
Counter64,
apAccPrevPeakDisassocDeauthReqRx
HundredthOfGauge64,
apAccCurPeakDisassocDeauthReqRx
HundredthOfGauge64,
apAccAverageDisassocDeauthReqRx
HundredthOfGauge64,
apAccCurrentDisassocDeauthReqRx
HundredthOfGauge64,
apAccDisassocDeauthReqRx
Counter64
}
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.1
apAccPrevPeakAssocReqRx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak number of association requests in hundredth of requests per second received by AP from last 15 minute interval."
::= { apAccessibilityEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.2
apAccCurPeakAssocReqRx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak number of association requests in hundredth of requests per second received by AP of current 15 minute interval."
::= { apAccessibilityEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.3
apAccAverageAssocReqRx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of association requests in hundredth of requests per second received by an AP radio."
::= { apAccessibilityEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.4
apAccCurrentAssocReqRx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Association requests in hundredth of requests per second from latest statistics from AP."
::= { apAccessibilityEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.5
apAccAssocReqRx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running counter of association requests."
::= { apAccessibilityEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.6
apAccPrevPeakReassocReqRx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak number of re-association requests in hundredth of requests per second received by an AP radio from last 15 minute interval."
::= { apAccessibilityEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.7
apAccCurPeakReassocReqRx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak number of re-association requests in hundredth of requests per second received by an AP radio of current 15 minute interval."
::= { apAccessibilityEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.8
apAccAverageReassocReqRx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of re-association requests in hundredth of requests per second received by an AP radio."
::= { apAccessibilityEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.9
apAccCurrentReassocReqRx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Re-association requests in hundredth of requests per second received by an AP radio from latest statistics from AP."
::= { apAccessibilityEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.10
apAccReassocReqRx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running counter of re-association requests received by an AP radio."
::= { apAccessibilityEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.11
apAccPrevPeakDisassocDeauthReqTx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak number of disassociation/deauthentication requests in hundredth of requests per
second transmitted by an AP radio from last 15 minute interval."
::= { apAccessibilityEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.12
apAccCurPeakDisassocDeauthReqTx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak number of disassociation/deauthentication requests in hundredth of requests per
second transmitted by an AP radio of current 15 minute interval."
::= { apAccessibilityEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.13
apAccAverageDisassocDeauthReqTx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of disassociation/deauthentication requests in hundredth
of requests per second transmitted by an AP radio."
::= { apAccessibilityEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.14
apAccCurrentDisassocDeauthReqTx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Disassociation/deauthentication requests in hundredth of requests per second
transmitted by an AP radio from latest statistics from AP."
::= { apAccessibilityEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.15
apAccDisassocDeauthReqTx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running counter of disassociation/deauthentication requests transmitted by an AP radio."
::= { apAccessibilityEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.16
apAccPrevPeakDisassocDeauthReqRx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak number of disassociation/deauthentication requests in hundredth of
requests per second received by an AP radio from last 15 minute interval."
::= { apAccessibilityEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.17
apAccCurPeakDisassocDeauthReqRx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak number of disassociation/deauthentication requests in hundredth of requests
per second received by an AP radio of current 15 minute interval."
::= { apAccessibilityEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.18
apAccAverageDisassocDeauthReqRx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of disassociation/deauthentication requests in hundredth
of requests per second received by an AP radio."
::= { apAccessibilityEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.19
apAccCurrentDisassocDeauthReqRx OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Disassociation/deauthentication requests in hundredth of requests per
second received by an AP radio from latest statistics from AP."
::= { apAccessibilityEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.5.2.6.1.20
apAccDisassocDeauthReqRx OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running counter of disassociation/deauthentication requests received by an AP radio."
::= { apAccessibilityEntry 20 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7
apPerformanceReportbyRadioAndWlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApPerformanceReportbyRadioAndWlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of AP performance statistics by AP, AP radio and WLAN. "
::= { apStatsObjects 7 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1
apPerformanceReportbyRadioAndWlanEntry OBJECT-TYPE
SYNTAX ApPerformanceReportbyRadioAndWlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The AP performance statistics of one AP radio and WLAN."
INDEX {apIndex, apRadioIndex, wlanID }
::= { apPerformanceReportbyRadioAndWlanTable 1 }
ApPerformanceReportbyRadioAndWlanEntry ::=
SEQUENCE {
apPerfWlanPrevPeakClientsPerSec
Gauge32,
apPerfWlanCurPeakClientsPerSec
Gauge32,
apPerfWlanAverageClientsPerSec
HundredthOfGauge32,
apPerfWlanCurrentClientsPerSec
Gauge32,
apPerfWlanPrevPeakULOctetsPerSec
HundredthOfGauge64,
apPerfWlanCurPeakULOctetsPerSec
HundredthOfGauge64,
apPerfWlanAverageULOctetsPerSec
HundredthOfGauge64,
apPerfWlanCurrentULOctetsPerSec
HundredthOfGauge64,
apPerfWlanULOctets
Counter64,
apPerfWlanPrevPeakULPktsPerSec
HundredthOfGauge64,
apPerfWlanCurPeakULPktsPerSec
HundredthOfGauge64,
apPerfWlanAverageULPktsPerSec
HundredthOfGauge64,
apPerfWlanCurrentULPktsPerSec
HundredthOfGauge64,
apPerfWlanULPkts
Counter64,
apPerfWlanPrevPeakDLOctetsPerSec
HundredthOfGauge64,
apPerfWlanCurPeakDLOctetsPerSec
HundredthOfGauge64,
apPerfWlanAverageDLOctetsPerSec
HundredthOfGauge64,
apPerfWlanCurrentDLOctetsPerSec
HundredthOfGauge64,
apPerfWlanDLOctets
Counter64,
apPerfWlanPrevPeakDLPktsPerSec
HundredthOfGauge64,
apPerfWlanCurPeakDLPktsPerSec
HundredthOfGauge64,
apPerfWlanAverageDLPktsPerSec
HundredthOfGauge64,
apPerfWlanCurrentDLPktsPerSec
HundredthOfGauge64,
apPerfWlanDLPkts
Counter64
}
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.1
apPerfWlanPrevPeakClientsPerSec OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak clients per second from last 15 minute interval."
::= { apPerformanceReportbyRadioAndWlanEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.2
apPerfWlanCurPeakClientsPerSec OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak clients per second of current 15 minute interval."
::= { apPerformanceReportbyRadioAndWlanEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.3
apPerfWlanAverageClientsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of clients in hundredth of clients per second."
::= { apPerformanceReportbyRadioAndWlanEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.4
apPerfWlanCurrentClientsPerSec OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Clients per second from latest statistics from AP."
::= { apPerformanceReportbyRadioAndWlanEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.5
apPerfWlanPrevPeakULOctetsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak uplink octets in hundredth of octets per second from last 15 minute interval."
::= { apPerformanceReportbyRadioAndWlanEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.6
apPerfWlanCurPeakULOctetsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak uplink octets in hundredth of octets per second of current 15 minute interval."
::= { apPerformanceReportbyRadioAndWlanEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.7
apPerfWlanAverageULOctetsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of uplink hundredth of octets per second."
::= { apPerformanceReportbyRadioAndWlanEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.8
apPerfWlanCurrentULOctetsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink octets in hundredth of octets per second from latest statistics from AP."
::= { apPerformanceReportbyRadioAndWlanEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.9
apPerfWlanULOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running counter of uplink octets per second."
::= { apPerformanceReportbyRadioAndWlanEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.10
apPerfWlanPrevPeakULPktsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak uplink packets in hundredth of packets per second from last 15 minute interval."
::= { apPerformanceReportbyRadioAndWlanEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.11
apPerfWlanCurPeakULPktsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak uplink packets in hundredth of packets per second of current 15 minute interval."
::= { apPerformanceReportbyRadioAndWlanEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.12
apPerfWlanAverageULPktsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of uplink packets in hundredth of packets per second."
::= { apPerformanceReportbyRadioAndWlanEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.13
apPerfWlanCurrentULPktsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink packets in hundredth of packets per second from latest statistics from AP."
::= { apPerformanceReportbyRadioAndWlanEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.14
apPerfWlanULPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running counter of uplink packets per second."
::= { apPerformanceReportbyRadioAndWlanEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.15
apPerfWlanPrevPeakDLOctetsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak downlink octets in hundredth of octets per second from last 15 minute interval."
::= { apPerformanceReportbyRadioAndWlanEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.16
apPerfWlanCurPeakDLOctetsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak downlink octets in hundredth of octets per second of current 15 minute interval."
::= { apPerformanceReportbyRadioAndWlanEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.17
apPerfWlanAverageDLOctetsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of downlink octets in hundredth of octets per second."
::= { apPerformanceReportbyRadioAndWlanEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.18
apPerfWlanCurrentDLOctetsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downlink octets in hundredth octets per second from latest statistics from AP."
::= { apPerformanceReportbyRadioAndWlanEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.19
apPerfWlanDLOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running counter of downlink octets per second."
::= { apPerformanceReportbyRadioAndWlanEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.20
apPerfWlanPrevPeakDLPktsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak downlink packets in hundredth of packets per second from last 15 minute interval."
::= { apPerformanceReportbyRadioAndWlanEntry 20 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.21
apPerfWlanCurPeakDLPktsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak downlink packets in hundredth of packets per second of current 15 minute interval."
::= { apPerformanceReportbyRadioAndWlanEntry 21 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.22
apPerfWlanAverageDLPktsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of downlink packets in hundredth of packets per second."
::= { apPerformanceReportbyRadioAndWlanEntry 22 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.23
apPerfWlanCurrentDLPktsPerSec OBJECT-TYPE
SYNTAX HundredthOfGauge64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downlink packets in hundredth of packets per second from latest statistics from AP."
::= { apPerformanceReportbyRadioAndWlanEntry 23 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1.24
apPerfWlanDLPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running counter of downlink packets per second."
::= { apPerformanceReportbyRadioAndWlanEntry 24 }
-- 1.3.6.1.4.1.4329.15.3.5.2.8
apChannelUtilizationTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApChannelUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of AP utilization by channel that the AP can change dynamically.
It contains one entry for each radio and channel of each active AP."
::= { apStatsObjects 8 }
-- 1.3.6.1.4.1.4329.15.3.5.2.7.1
apChannelUtilizationEntry OBJECT-TYPE
SYNTAX ApChannelUtilizationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The AP performance statistics of one AP radio and channel."
INDEX {apIndex, apRadioIndex, channel }
::= { apChannelUtilizationTable 1 }
ApChannelUtilizationEntry ::=
SEQUENCE {
channel
Unsigned32,
apChnlUtilPrevPeakUtilization
Gauge32,
apChnlUtilCurPeakUtilization
Gauge32,
apChnlUtilAverageUtilization
HundredthOfGauge32,
apChnlUtilCurrentUtilization
Gauge32
}
-- 1.3.6.1.4.1.4329.15.3.5.2.8.1.1
channel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Channel on which utilization is measured."
::= { apChannelUtilizationEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.2.8.1.2
apChnlUtilPrevPeakUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak channel utilization in % from last 15 minute interval."
::= { apChannelUtilizationEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.2.8.1.3
apChnlUtilCurPeakUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak channel utilization in % of current 15 minute interval."
::= { apChannelUtilizationEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.2.8.1.4
apChnlUtilAverageUtilization OBJECT-TYPE
SYNTAX HundredthOfGauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Running average of channel utilization in hundredth of %."
::= { apChannelUtilizationEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.5.2.8.1.5
apChnlUtilCurrentUtilization OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Channel utilization in % from latest statistics from AP."
::= { apChannelUtilizationEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.5.2.9
apNeighboursTable OBJECT-TYPE
SYNTAX SEQUENCE OF ApNeighboursEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table showing the BSSID, RSS, operating radio channel and detailed information of a nearby AP.
The table contains one row per nearby AP per radio per active AP."
::= { apStatsObjects 9 }
-- 1.3.6.1.4.1.4329.15.3.5.2.9.1
apNeighboursEntry OBJECT-TYPE
SYNTAX ApNeighboursEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The configuration attributes of one nearby AP."
INDEX { apIndex, ifIndex, nearbyApIndex }
::= { apNeighboursTable 1 }
ApNeighboursEntry ::=
SEQUENCE {
nearbyApIndex
Unsigned32,
nearbyApInfo
DisplayString,
nearbyApBSSID
OCTET STRING,
nearbyApChannel
DisplayString,
nearbyApRSS
Integer32
}
-- 1.3.6.1.4.1.4329.15.3.5.2.9.1.1
nearbyApIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Nearby AP index."
::= { apNeighboursEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.2.9.1.2
nearbyApInfo OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Detailed information of a nearby AP. "
::= { apNeighboursEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.2.9.1.3
nearbyApBSSID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (17))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The BSSID of a nearby AP. "
::= { apNeighboursEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.2.9.1.4
nearbyApChannel OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating radio channel of a nearby AP. "
::= { apNeighboursEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.5.2.9.1.5
nearbyApRSS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Received Signal Strength of a nearby AP. "
::= { apNeighboursEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.5.3
sensorManagement OBJECT IDENTIFIER ::= { accessPoints 3 }
-- 1.3.6.1.4.1.4329.15.3.5.3.1
tftpSever OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"TFTP server that sensor image resides."
::= { sensorManagement 1 }
-- 1.3.6.1.4.1.4329.15.3.5.3.2
imagePath26xx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Path of sensor image on TFTP server."
::= { sensorManagement 2 }
-- 1.3.6.1.4.1.4329.15.3.5.3.3
imagePath36xx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Path of sensor image on TFTP server."
::= { sensorManagement 3 }
-- 1.3.6.1.4.1.4329.15.3.5.3.4
imageVersionOfap26xx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sensor's software version."
::= { sensorManagement 4 }
-- 1.3.6.1.4.1.4329.15.3.5.3.5
imageVersionOfngap36xx OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Sensor's softerware version for Next Generation Access Point."
::= { sensorManagement 5 }
-- 1.3.6.1.4.1.4329.15.3.5.4
apRegistration OBJECT IDENTIFIER ::= { accessPoints 4 }
-- 1.3.6.1.4.1.4329.15.3.5.4.1
apRegSecurityMode OBJECT-TYPE
SYNTAX INTEGER
{
allowAll(1),
allowApprovedOnes(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates registration mode for an AP. If allowAll(1), then all wireless
APs are allowed to register to the controlloer, otherwise only approved
APs in 'Approved AP' list are allowed to register to the controller."
::= { apRegistration 1 }
-- 1.3.6.1.4.1.4329.15.3.5.4.2
apRegDiscoveryRetries OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of retries for discovery requests from an access point to controller. After
these number of retries, the access point will start over again after some arbitrary
delays."
DEFVAL { 3 }
::= { apRegistration 2 }
-- 1.3.6.1.4.1.4329.15.3.5.4.3
apRegDiscoveryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval between two consecutive discovery requests from the same access point."
DEFVAL { 3 }
::= { apRegistration 3 }
-- 1.3.6.1.4.1.4329.15.3.5.4.4
apRegTelnetPassword OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Password used to access an AP via telnet. This field is write-only and read access
returns empty string."
::= { apRegistration 4 }
-- 1.3.6.1.4.1.4329.15.3.5.4.5
apRegSSHPassword OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSH password used to access an access point. This field is write-only and read access
returns empty string."
::= { apRegistration 5 }
-- 1.3.6.1.4.1.4329.15.3.5.4.6
apRegUseClusterEncryption OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this field set to true, then all APs in the cluster use cluster encryption."
::= { apRegistration 6 }
-- 1.3.6.1.4.1.4329.15.3.5.4.7
apRegClusterSharedSecret OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Password for cluster encryption. This field is write-only and read access returns empty string."
::= { apRegistration 7 }
-- 1.3.6.1.4.1.4329.15.3.5.5
loadBalancing OBJECT IDENTIFIER ::= { accessPoints 5 }
-- 1.3.6.1.4.1.4329.15.3.5.5.1
loadGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoadGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of configured load groups for access points. A set of access points can
be grouped together and they are identified by unique name. An access point
can only be assigned to one group."
::= { loadBalancing 1 }
-- 1.3.6.1.4.1.4329.15.3.5.5.1.1
loadGroupEntry OBJECT-TYPE
SYNTAX LoadGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing definition of a load group. There exists two types of load group:
client-balancing-group and radio-balancing-group."
INDEX { loadGroupID }
::= { loadGroupTable 1 }
LoadGroupEntry ::=
SEQUENCE {
loadGroupID
Unsigned32,
loadGroupName
DisplayString,
loadGroupType
INTEGER,
loadGroupBandPreference
INTEGER,
loadGroupLoadControl
INTEGER,
loadGroupClientCountRadio1
Unsigned32,
loadGroupClientCountRadio2
Unsigned32,
loadGroupLoadControlEnableR1
INTEGER,
loadGroupLoadControlEnableR2
INTEGER,
loadGroupLoadControlStrictLimitR1
INTEGER,
loadGroupLoadControlStrictLimitR2
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.5.5.1.1.1
loadGroupID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internally generated ID for a group and cannot be changed externally."
::= { loadGroupEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.5.1.1.2
loadGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Unique name assigned to the group."
::= { loadGroupEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.5.1.1.3
loadGroupType OBJECT-TYPE
SYNTAX INTEGER
{
clientBalancing(0),
radioBalancing(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of load balancing this group supports."
::= { loadGroupEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.5.1.1.4
loadGroupBandPreference OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Band preference is enabled for this group if this field is set to true and group type
is set to radioBalancing(1)."
::= { loadGroupEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.5.5.1.1.5
loadGroupLoadControl OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"Load balancing is enabled for this group if this field is set to true and group type
is set to radioBalancing(1)."
DEFVAL { disabled }
::= { loadGroupEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.5.5.1.1.6
loadGroupClientCountRadio1 OBJECT-TYPE
SYNTAX Unsigned32 (5..60 | 121)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of client on this radio. This field is only applicable to a group with
radioBalancing(1) type."
DEFVAL { 121 }
::= { loadGroupEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.5.5.1.1.7
loadGroupClientCountRadio2 OBJECT-TYPE
SYNTAX Unsigned32 (5..60 | 121)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum number of client on this radio. This field is only applicable to a group with
radioBalancing(1) type."
DEFVAL { 121 }
::= { loadGroupEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.5.5.1.1.8
loadGroupLoadControlEnableR1 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is enabled then load control is applicable to radio #1 of all access points that are
assigned to this load group.
This field has meaning only for the load group that is of radioBalancing(1) type. "
::= { loadGroupEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.5.5.1.1.9
loadGroupLoadControlEnableR2 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is enabled then load control is applicable to radio #2 of all access points that are
assigned to this load group.
This field has meaning only for the load group that is of radioBalancing(1) type."
::= { loadGroupEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.5.5.1.1.10
loadGroupLoadControlStrictLimitR1 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is enabled then strict limit for load control is applicable to radio #1 of all
access points that are assigned to this load group.
This field has meaning only for the load group that is of radioBalancing(1) type."
::= { loadGroupEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.5.5.1.1.11
loadGroupLoadControlStrictLimitR2 OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If it is enabled then strict limit for load control is applicable to radio #2 of all
access points that are assigned to this load group.
This field has meaning only for the load group that is of radioBalancing(1) type."
::= { loadGroupEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.5.5.2
loadGrpRadiosTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoadGrpRadiosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of radio assignment to defined load groups. "
::= { loadBalancing 2 }
-- 1.3.6.1.4.1.4329.15.3.5.5.2.1
loadGrpRadiosEntry OBJECT-TYPE
SYNTAX LoadGrpRadiosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Any entry defining radio assignment of AP, identified by apIndex, to a load group
identified by loadGroupID."
INDEX { loadGroupID, apIndex }
::= { loadGrpRadiosTable 1 }
LoadGrpRadiosEntry ::=
SEQUENCE {
loadGrpRadiosRadio1
INTEGER,
loadGrpRadiosRadio2
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.5.5.2.1.2
loadGrpRadiosRadio1 OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable(0),
assigned(1),
unassigned(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this field is set to 'assigned(1)', then the radio of the AP identified by the
apIndex is a member of the load balancing group identified by the loadBlanaceID.
For radio blanacing group, either all or none of the radios of a specific AP
(indentified by apIndex) are assigned to the load balancing group."
::= { loadGrpRadiosEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.5.5.2.1.3
loadGrpRadiosRadio2 OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable(0),
assigned(1),
unassigned(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this field is set to 'assigned(2)', then the radio of the AP identified by the
apIndex is a member of the load balancing group identified by the loadBlanaceID.
For radio blanacing group, either all or none of the radios of a specific AP
(indentified by apIndex) are assigned to the load balancing group."
::= { loadGrpRadiosEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.5.5.3
loadGrpWlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoadGrpWlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of WLAN assignment to defined load groups. "
::= { loadBalancing 3 }
-- 1.3.6.1.4.1.4329.15.3.5.5.3.1
loadGrpWlanEntry OBJECT-TYPE
SYNTAX LoadGrpWlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry defining WLAN, identified by wlanID, assignment to a load group identified
by loadGroupID."
INDEX { loadGroupID, wlanID }
::= { loadGrpWlanTable 1 }
LoadGrpWlanEntry ::=
SEQUENCE {
loadGrpWlanAssigned
TruthValue
}
-- 1.3.6.1.4.1.4329.15.3.5.5.3.1.1
loadGrpWlanAssigned OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Assignement of WLAN, identified with wlanID, to the load balancing group identified
bye loadGroupID."
::= { loadGrpWlanEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.5.6
apMaintenanceCycle OBJECT IDENTIFIER ::= { accessPoints 6 }
-- 1.3.6.1.4.1.4329.15.3.5.6.1
schedule OBJECT-TYPE
SYNTAX INTEGER
{
never(0),
daily(1),
weekly(2),
monthly(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"AP maintenance schedule options.
0 : never perform the maintenance action.
1 : perform the maintenance action every day.
2 : perform the maintenance action every week.
3 : perform the maintenance action every month."
::= { apMaintenanceCycle 1 }
-- 1.3.6.1.4.1.4329.15.3.5.6.2
startHour OBJECT-TYPE
SYNTAX Integer32 (0..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maintenance action starts at this hour of the day. "
::= { apMaintenanceCycle 2 }
-- 1.3.6.1.4.1.4329.15.3.5.6.3
startMinute OBJECT-TYPE
SYNTAX Integer32(0..59)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maintenance action starts at this minute of the hour. "
::= { apMaintenanceCycle 3 }
-- 1.3.6.1.4.1.4329.15.3.5.6.4
duration OBJECT-TYPE
SYNTAX Integer32(1..23)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Duration of the AP maintenance cycle (how often maintenance is done) in hours. "
::= { apMaintenanceCycle 4 }
-- 1.3.6.1.4.1.4329.15.3.5.6.5
recurrenceDaily OBJECT-TYPE
SYNTAX INTEGER
{
everyDay(0),
everyWeekday(1),
everyWeekend(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field has meaning only when the maintenance schedule option is set to daily(1). Below is the recurrence option.
0 : every day.
1 : every weekday.
2 : every weekend."
::= { apMaintenanceCycle 5 }
-- 1.3.6.1.4.1.4329.15.3.5.6.6
recurrenceWeekly OBJECT-TYPE
SYNTAX BITS
{
sunday(0),
monday(1),
tuesday(2),
wednesday(3),
thursday(4),
friday(5),
saturday(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field has meaning only when the maintenance schedule option is set to weekly(2). Below are the recurrence options.
BIT 0 : Sunday.
BIT 1 : Monday.
BIT 2 : Tuesday.
BIT 3 : Wednesday.
BIT 4 : Thursday.
BIT 5 : Friday.
BIT 6 : Saturday."
::= { apMaintenanceCycle 6 }
-- 1.3.6.1.4.1.4329.15.3.5.6.7
recurrenceMonthly OBJECT-TYPE
SYNTAX BITS
{
first(0),
second(1),
third(2),
fourth(3),
fifth(4),
sunday(5),
monday(6),
tuesday(7),
wednesday(8),
thursday(9),
friday(10),
saturday(11)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field has meaning only when the maintenance schedule option is set to monthly(3). Below are the recurrence options.
BIT 0 : the first week of the month.
BIT 1 : the second week of the month.
BIT 2 : the third week of the month.
BIT 3 : the fourth week of the month.
BIT 4 : the fifth week of the month.
BIT 5 : sunday of the week.
BIT 6 : monday of the week.
BIT 7 : tuesday of the week.
BIT 8 : wednesday of the week.
BIT 9 : thursday of the week.
BIT 10 : friday of the week.
BIT 11 : saturday of the week."
::= { apMaintenanceCycle 7 }
-- 1.3.6.1.4.1.4329.15.3.5.6.8
apPlatforms OBJECT-TYPE
SYNTAX BITS
{
ap2600(0),
ap2605(1),
ap2650(2),
ap4102(3),
w786(4),
ap3705(5),
ap3710(6),
ap3715(7),
ap3765(8),
ap3767(9),
ap3801(10),
ap3805(11),
ap3825(12),
ap3865(13),
ap3935(14),
ap3965(15),
w78xc(16),
w78xcsfp(17)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select which models of the AP platforms to perform the maintenance.
BIT 0 : AP2600 platform.
BIT 1 : AP2605 platform.
BIT 2 : AP2650 platform.
BIT 3 : AP4102 platform.
BIT 4 : W786 platform.
BIT 5 : AP3705 platform.
BIT 6 : AP3710 platform.
BIT 7 : AP3715 platform.
BIT 8 : AP3765 platform.
BIT 9 : AP3767 platform.
BIT 10 : AP3801 platform.
BIT 11 : AP3805 platform.
BIT 12 : AP3825 platform.
BIT 13 : AP3865 platform.
BIT 14 : AP3935 platform.
BIT 15 : AP3965 platform.
BIT 16 : W78XC platform.
BIT 17 : W78XCSFP platform."
::= { apMaintenanceCycle 8 }
-- 1.3.6.1.4.1.4329.15.3.6
mobileUnits OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 6 }
-- 1.3.6.1.4.1.4329.15.3.6.1
mobileUnitCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of clients associated with the controller."
::= { mobileUnits 1 }
-- 1.3.6.1.4.1.4329.15.3.6.2
muTable OBJECT-TYPE
SYNTAX SEQUENCE OF MuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information for clients associated with the EWC."
::= { mobileUnits 2 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1
muEntry OBJECT-TYPE
SYNTAX MuEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a client associated with the EWC."
INDEX { muMACAddress }
::= { muTable 1 }
MuEntry ::=
SEQUENCE {
muMACAddress
MacAddress,
muIPAddress
IpAddress,
muUser
OCTET STRING,
muState
TruthValue,
muAPSerialNo
OCTET STRING,
muVnsSSID
OCTET STRING,
muTxPackets
Counter64,
muRxPackets
Counter64,
muTxOctets
Counter64,
muRxOctets
Counter64,
muDuration
Counter64,
muAPName
DisplayString,
muTopologyName
DisplayString,
muPolicyName
DisplayString,
muDefaultCoS
DisplayString,
muConnectionProtocol
INTEGER,
muConnectionCapability
INTEGER,
muWLANID
Unsigned32,
muBSSIDMac
MacAddress,
muDot11ConnectionCapability
BITS
}
-- 1.3.6.1.4.1.4329.15.3.6.2.1.1
muMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Client MAC address."
::= { muEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.2
muIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Client IP Address."
::= { muEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.3
muUser OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Client login name."
::= { muEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.4
muState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"True if the client is authenticated."
::= { muEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.5
muAPSerialNo OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial Number of the Access Point the client is associated with."
::= { muEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.6
muVnsSSID OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID of the VNS the client is associated with."
::= { muEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.7
muTxPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets trasmitted to the client."
::= { muEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.8
muRxPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of packets received from the client."
::= { muEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.9
muTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets transmitted to the client."
::= { muEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.10
muRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received from the client."
::= { muEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.11
muDuration OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time client has been associated with the EWC."
::= { muEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.12
muAPName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the Access Point the client is associated with."
::= { muEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.13
muTopologyName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Topology name that the MU is associated with."
::= { muEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.14
muPolicyName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the policy that provides filter for this MU."
::= { muEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.15
muDefaultCoS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The CoS that is applied to the current traffic if the defined rule for
the current traffic has not specifically defined any CoS."
::= { muEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.16
muConnectionProtocol OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
a(1),
g(2),
b(3),
n50(4),
n24(5),
ac(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MU is using this connection protocol for current connection.
Symbols notation: n50 = an = n5.0Ghz, n24 = bgn = n2.4Ghz"
::= { muEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.17
muConnectionCapability OBJECT-TYPE
SYNTAX INTEGER
{
unknown(0),
a(1),
bg(2),
abg(3),
an(4),
bgn(5)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This field indicates what are the MU connection capability."
::= { muEntry 17 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.18
muWLANID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ID of the WLAN that the MU is associated with."
::= { muEntry 18 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.19
muBSSIDMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Client BSSID MAC address."
::= { muEntry 19 }
-- 1.3.6.1.4.1.4329.15.3.6.2.1.20
muDot11ConnectionCapability OBJECT-TYPE
SYNTAX BITS
{
dot1150(0),
dot1124 (1),
wpaV1(2),
wpaV2(3),
oneStream(4),
twoStream(5),
threeSteam(6),
uapsdVoice(7),
uapsdVideo(8),
uapsdBackground(9),
uapsdBesteffort(10),
wmm(11),
greenfield(12),
fastTransition(13)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field indicates what are the MU connection capabilities.
bit 0 : If this bit is set, the client is capable to tx/rx on A radio.
bit 1 : If this bit is set, the client is capable to tx/rx on BG radio.
bit 2 : If this bit is set, the client is capable of wpaV1 privacy.
bit 3 : If this bit is set, the client is capable of wpaV2 privacy.
bit 4 : If this bit is set, the client is capable to comunicate with 1 data stream.
bit 5 : If this bit is set, the client is capable to comunicate with 2 data streams.
bit 6 : If this bit is set, the client is capable to comunicate with 3 data streams.
bit 7 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits.
The voice client can synchronize the transmission and reception of voice frames with the AP.
bit 8 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits.
The video client can synchronize the transmission and reception of video frames with the AP.
bit 9 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits.
The client can synchronize the transmission and reception in background queue.
bit 10 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits.
The client can synchronize the transmission and reception in best effort queue.
bit 11 : If this bit is set, the client is capable of Wi-Fi Multimedia(WMM) power save.
bit 12 : If this bit is set, the client is capable of 802.11n Greenfield mode.
bit 13 : If this bit is set, the client is on fast-transition mode."
::= { muEntry 20 }
-- 1.3.6.1.4.1.4329.15.3.6.3
muTSPECTable OBJECT-TYPE
SYNTAX SEQUENCE OF MuTSPECEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information for Admission Control Statistics by active client."
::= { mobileUnits 3 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1
muTSPECEntry OBJECT-TYPE
SYNTAX MuTSPECEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for Admission Control Statistics by active client."
INDEX { apIndex, muMACAddress, tspecAC, tspecDirection }
::= { muTSPECTable 1 }
MuTSPECEntry ::=
SEQUENCE {
tspecMuMACAddress
MacAddress,
tspecAC
INTEGER,
tspecDirection
INTEGER,
tspecApSerialNumber
OCTET STRING,
tspecMuIPAddress
IpAddress,
tspecBssMac
MacAddress,
tspecSsid
DisplayString,
tspecMDR
Unsigned32,
tspecNMS
Unsigned32,
tspecSBA
Unsigned32,
tspecDlRate
DisplayString,
tspecUlRate
DisplayString,
tspecDlViolations
DisplayString,
tspecUlViolations
DisplayString,
tspecProtocol
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.6.3.1.1
tspecMuMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Client MAC address."
::= { muTSPECEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.2
tspecAC OBJECT-TYPE
SYNTAX INTEGER
{
be(0),
bk(1),
vi(2),
vo(3),
tvo(4),
nwme(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Access Category, such as Best Effort, Background, Voice, Video,
and Reserved."
::= { muTSPECEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.3
tspecDirection OBJECT-TYPE
SYNTAX INTEGER
{
uplink(0),
dnlink(1),
reserved(2),
bidir(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Traffic direction, such as uplink direction, downlink direction."
::= { muTSPECEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.4
tspecApSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"16-character serial number of the AccessPoint."
::= { muTSPECEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.5
tspecMuIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Client IP Address."
::= { muTSPECEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.6
tspecBssMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Access Point BSSID."
::= { muTSPECEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.7
tspecSsid OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VNS SSID."
::= { muTSPECEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.8
tspecMDR OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Mean Data Rate (bytes per second)."
::= { muTSPECEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.9
tspecNMS OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Nominal MSDU size (bytes)."
::= { muTSPECEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.10
tspecSBA OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Surplus Bandwidth Allowance."
::= { muTSPECEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.11
tspecDlRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downlink Rate (bytes per second)."
::= { muTSPECEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.12
tspecUlRate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink Rate (bytes per second)."
::= { muTSPECEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.13
tspecDlViolations OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Downlink Violations (bytes per second)."
::= { muTSPECEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.14
tspecUlViolations OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Uplink Violations (bytes per second)."
::= { muTSPECEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.6.3.1.15
tspecProtocol OBJECT-TYPE
SYNTAX INTEGER
{
proto80211a(1),
proto80211g(2),
proto80211b(3),
proto80211an(4),
proto80211bgn(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"802.11 radio protocol."
::= { muTSPECEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.6.4
muACLType OBJECT-TYPE
SYNTAX INTEGER
{
blacklist(1),
whitelist(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MUs can access EWC by sending association request and providing proper
credentials. However, EWC allows creation of a master list of a blacklist
or a whitelist group to control such access. There can exist only a blacklist
or a whitelist (mutually exclusive) at any time. The list of MUs belonging
to such a list is populated in muACLTable. The muACLTable content can be
interpreted in conjunction with this field as follows:
- blacklist(1): MUs listed in muACLTable cannot access EWC resources.
- whitelist(2): Only MUs listed in muACLTable can access EWC resources."
DEFVAL { 1 }
::= { mobileUnits 4 }
-- 1.3.6.1.4.1.4329.15.3.6.5
muACLTable OBJECT-TYPE
SYNTAX SEQUENCE OF MuACLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Semantics of this list is directly related to muACLType.
Access Control List(ACL) is list of MUs and their access rights. An MU can
either belong to 'Blacklist', in that case its association request is denied, or
it can belong to 'Whitelist', in that case it is allowed to associate to EWC
provided having proper credentials."
::= { mobileUnits 5 }
-- 1.3.6.1.4.1.4329.15.3.6.5.1
muACLEntry OBJECT-TYPE
SYNTAX MuACLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry about an MU and its ACL."
INDEX { muACLMACAddress }
::= { muACLTable 1 }
MuACLEntry ::=
SEQUENCE {
muACLMACAddress
MacAddress,
muACLRowStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.6.5.1.1
muACLMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of MU."
::= { muACLEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.6.5.1.2
muACLRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An MU can either be added or removed to this list, therefore, allowed set values
for this field are: createAndGo, destroy."
::= { muACLEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.6.6
muAccessListTable OBJECT-TYPE
SYNTAX SEQUENCE OF MuAccessListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Semantics of this list is directly related to muACLType.
Access List Control(ACL) list of MUs and their access rights. An MU can
either belong to 'Blacklist', in that case its association request is denied, or
it can belong to 'Whitelist', in that case it is allowed to associate to EWC
provided having proper credentials."
::= { mobileUnits 6 }
-- 1.3.6.1.4.1.4329.15.3.6.6.1
muAccessListEntry OBJECT-TYPE
SYNTAX MuAccessListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry about about an MU and its ACL."
INDEX { muAccessListMACAddress }
::= { muAccessListTable 1 }
MuAccessListEntry ::=
SEQUENCE {
muAccessListMACAddress
MacAddress,
muAccessListBitmaskLength
INTEGER,
muAccessListRowStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.6.6.1.1
muAccessListMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of MU."
::= { muAccessListEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.6.6.1.2
muAccessListBitmaskLength OBJECT-TYPE
SYNTAX INTEGER
{
bits24(24),
bits36(36),
bits48(48)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Length of bitmask associated to the MAC address in the entry."
::= { muAccessListEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.6.6.1.3
muAccessListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An MU can either be added or removed to this list, therefore, allowed set values
for this field are: createAndGo, destroy."
::= { muAccessListEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.7
associations OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 7 }
-- 1.3.6.1.4.1.4329.15.3.7.1
assocCount OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Total number of current client associations to the access point."
::= { associations 1 }
-- 1.3.6.1.4.1.4329.15.3.7.2
assocTable OBJECT-TYPE
SYNTAX SEQUENCE OF AssocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of information about clients associated with the access point."
::= { associations 2 }
-- 1.3.6.1.4.1.4329.15.3.7.2.1
assocEntry OBJECT-TYPE
SYNTAX AssocEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information for a single client in the association table."
INDEX { assocMUMacAddress, apIndex, assocStartSysUpTime }
::= { assocTable 1 }
AssocEntry ::=
SEQUENCE {
assocMUMacAddress
MacAddress,
assocStartSysUpTime
TimeTicks,
assocTxPackets
Counter64,
assocRxPackets
Counter64,
assocTxOctets
Counter64,
assocRxOctets
Counter64,
assocDuration
Integer32,
assocVnsIfIndex
InterfaceIndex
}
-- 1.3.6.1.4.1.4329.15.3.7.2.1.1
assocMUMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the client."
::= { assocEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.7.2.1.2
assocStartSysUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system uptime that client became associated with the access point."
::= { assocEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.7.2.1.3
assocTxPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Nubmer of tx packets to the client."
::= { assocEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.7.2.1.4
assocRxPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of received packets from the client."
::= { assocEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.7.2.1.5
assocTxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets sent to the client."
::= { assocEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.7.2.1.6
assocRxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of octets received from the client."
::= { assocEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.7.2.1.7
assocDuration OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length of time since last association."
::= { assocEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.7.2.1.8
assocVnsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Index of VNS to which the MU is associated with."
::= { assocEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.8
protocols OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 8 }
-- 1.3.6.1.4.1.4329.15.3.8.1
wassp OBJECT IDENTIFIER ::= { protocols 1 }
-- 1.3.6.1.4.1.4329.15.3.9
logNotifications OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 9 }
-- 1.3.6.1.4.1.4329.15.3.9.1
logEventSeverityThreshold OBJECT-TYPE
SYNTAX LogEventSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the minimum level at which the SNMP agent will
send notifications for log events. I.e., setting this
value to 'major' will send notifcations for critical and
major log events. Setting the threshold to minor will
trap critical, major, and minor events."
::= { logNotifications 1 }
-- 1.3.6.1.4.1.4329.15.3.9.3
logEventSeverity OBJECT-TYPE
SYNTAX LogEventSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the severity of the most recently trapped hiPathWirelessLogAlarm notification."
::= { logNotifications 3 }
-- 1.3.6.1.4.1.4329.15.3.9.4
logEventComponent OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the component which sent the most
recently trapped hiPathWirelessLogAlarm notification."
::= { logNotifications 4 }
-- 1.3.6.1.4.1.4329.15.3.9.5
logEventDescription OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the description of the most recently trapped
hiPathWirelessLogAlarm."
::= { logNotifications 5 }
-- 1.3.6.1.4.1.4329.15.3.9.6
hiPathWirelessLogAlarm NOTIFICATION-TYPE
OBJECTS { logEventSeverity, logEventComponent, logEventDescription }
STATUS current
DESCRIPTION
"Components of an alarm."
::= { logNotifications 6 }
-- 1.3.6.1.4.1.4329.15.3.10
sites OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 10 }
-- 1.3.6.1.4.1.4329.15.3.10.1
siteMaxEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries allowed in the siteTable. This value is platform
dependent."
::= { sites 1 }
-- 1.3.6.1.4.1.4329.15.3.10.2
siteNumEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of entries in the siteTable."
::= { sites 2 }
-- 1.3.6.1.4.1.4329.15.3.10.3
siteTableNextAvailableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the numerically lowest available index within this entity,
which may be used for the value of siteID in the creation of a new entry in the
siteTable.
An index is considered available if the index value falls within the range of 1
to siteMaxEntries value and is not being used to index an existing entry in the
siteTable contained within this entity.
This value should only be considered a guideline for management creation of siteEntries,
there is no requirement on management to create entries based upon this index value."
::= { sites 3 }
-- 1.3.6.1.4.1.4329.15.3.10.4
siteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SiteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A site is a logical entity that is constituted by collection of APs, CoS rules,
policies, Radius server, WLAN, etc. A site is identified by a unique name. "
::= { sites 4 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1
siteEntry OBJECT-TYPE
SYNTAX SiteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Definition of a site."
INDEX { siteID }
::= { siteTable 1 }
SiteEntry ::=
SEQUENCE {
siteID
Unsigned32,
siteRowStatus
RowStatus,
siteName
DisplayString,
siteLocalRadiusAuthentication
TruthValue,
siteDefaultDNSServer
DisplayString,
siteEnableSecureTunnel
TruthValue,
siteEncryptCommAPtoController
TruthValue,
siteEncryptCommBetweenAPs
TruthValue,
siteBandPreferenceEnable
INTEGER,
siteLoadControlEnableR1
INTEGER,
siteLoadControlEnableR2
INTEGER,
siteMaxClientR1
Unsigned32,
siteMaxClientR2
Unsigned32,
siteStrictLimitEnableR1
INTEGER,
siteStrictLimitEnableR2
INTEGER,
siteReplaceStnIDwithSiteName
TruthValue
}
-- 1.3.6.1.4.1.4329.15.3.10.4.1.1
siteID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An unique ID, identifying the site in the context of the controller. The site ID
can be an integer value from 1 to the maximum number of APs supported by the EWC."
::= { siteEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.2
siteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the entry."
::= { siteEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.3
siteName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Textual description to identify the site in the context of the controller."
::= { siteEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.4
siteLocalRadiusAuthentication OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this value is set to true, then the RADIUS client is on APs, otherwise the
RADIUS client is on controller."
::= { siteEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.5
siteDefaultDNSServer OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the APs associated to the site uses DHCP, and DHCP server does not assign DNS
server, then this entry will be used for that purpose. Otherwise, if AP is configured
with static IP address, then this entry will be used for that purpose."
::= { siteEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.6
siteEnableSecureTunnel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set to true secure communication key sent to APs to be used to encrypt the traffic
between APs within the site and the traffic between controller and APs. However, the
encryption itself does not take place unless siteEncryptCommAPtoController and/or
siteEncryptCommBetweenAPs set to true."
::= { siteEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.7
siteEncryptCommAPtoController OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set to true, communication between APs within the site and the controller are encrypted
using defined encyption. For details about encryption type, please refer to user manual."
::= { siteEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.8
siteEncryptCommBetweenAPs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set to true, communication between APs within the site are encrypted using defined
encyption. For details about encryption type, please refer to user manual."
::= { siteEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.9
siteBandPreferenceEnable OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling/disabling band preference for the site and associated APs. By enabling
band preference 11a-capable clients can be moved to 11a radio and relieve the
congestion on the 11g radio. Band preference provides radio load balancing between
11g and 11a radios."
::= { siteEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.10
siteLoadControlEnableR1 OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling/disabling load control for the site for this radio. Load control manages
the number of clients on the Radio #1 by disallowing additional clients on the radio
above the configured radio limit."
::= { siteEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.11
siteLoadControlEnableR2 OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling/disabling load control for the site for this radio. Load control manages
the number of clients on the Radio #2 by disallowing additional clients on the radio
above the configured radio limit."
::= { siteEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.12
siteMaxClientR1 OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum number of clients that are allowed to be associated to this radio (radio #1).
If the Load Control is not enabled then the maximum for this radio uses default value."
::= { siteEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.13
siteMaxClientR2 OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum number of clients that are allowed to be associated to this radio (radio #2).
If the Load Control is not enabled then the maximum for this radio uses default value."
::= { siteEntry 13 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.14
siteStrictLimitEnableR1 OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling/disabling strict limit of load control for this radio that is assigned to the
site. Eanbleing strict limit enforces configured client limit for the radio (radio #1)
in any circumstances. Otherwise if this field is disabled then the restriction may not
be enforced in all circumstances."
::= { siteEntry 14 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.15
siteStrictLimitEnableR2 OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enabling/disabling strict limit of load control for this radio that is assigned to the
site. Eanbleing strict limit enforces configured client limit for the radio (radio #2)
in any circumstances. Otherwise if this field is disabled then the restriction may not
be enforced in all circumstances."
::= { siteEntry 15 }
-- 1.3.6.1.4.1.4329.15.3.10.4.1.16
siteReplaceStnIDwithSiteName OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this value is set to true, then the called station ID will be replaced with the
site name."
::= { siteEntry 16 }
-- 1.3.6.1.4.1.4329.15.3.10.5
sitePolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF SitePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each site can have zero or more policies assigned to it. All policies associated
to a site are pushed to the all APs belonging to the site. This table defines the
assignment of various policies to various sites."
::= { sites 5 }
-- 1.3.6.1.4.1.4329.15.3.10.5.1
sitePolicyEntry OBJECT-TYPE
SYNTAX SitePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry defining assignment of a policy, identified by sitePolicyID, to a site,
identified by siteID."
INDEX { siteID, sitePolicyID }
::= { sitePolicyTable 1 }
SitePolicyEntry ::=
SEQUENCE {
sitePolicyID
Unsigned32,
sitePolicyMember
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.10.5.1.1
sitePolicyID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The policy index, as defined ENTERASYS-POLICY-PROFILE-MIB::etsysPolicyProfileIndex."
::= { sitePolicyEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.10.5.1.2
sitePolicyMember OBJECT-TYPE
SYNTAX INTEGER
{
notMember(0),
isMember(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the policy associated with this row is a member of the zone
identified by zoneID."
::= { sitePolicyEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.10.6
siteCosTable OBJECT-TYPE
SYNTAX SEQUENCE OF SiteCosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each site can have zero or more CoS assigned to it. All CoS associated to a
site are pushed to the all APs belonging to the site. This table defines the
assignment of various CoS to various sites."
::= { sites 6 }
-- 1.3.6.1.4.1.4329.15.3.10.6.1
siteCosEntry OBJECT-TYPE
SYNTAX SiteCosEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry defining assignment of a CoS, identified by siteCoSID, to a site,
identified by siteID."
INDEX { siteID, siteCoSID }
::= { siteCosTable 1 }
SiteCosEntry ::=
SEQUENCE {
siteCoSID
Unsigned32,
siteCoSMember
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.10.6.1.1
siteCoSID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CoS index, as defined in ENTERASYS-POLICY-PROFILE-MIB::etsysCosIndex."
::= { siteCosEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.10.6.1.2
siteCoSMember OBJECT-TYPE
SYNTAX INTEGER
{
notMember(0),
isMember(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the CoS associated with this row is a member of the site identified
by siteID."
::= { siteCosEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.10.7
siteAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF SiteAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A site can have zero or more Access Points(AP) assigned to it. This table
defines the assignment of various APs to various sites."
::= { sites 7 }
-- 1.3.6.1.4.1.4329.15.3.10.7.1
siteAPEntry OBJECT-TYPE
SYNTAX SiteAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry defining assignment of an AP, identified by apIndex, to a site,
identified by siteID."
INDEX { siteID, apIndex }
::= { siteAPTable 1 }
SiteAPEntry ::=
SEQUENCE {
siteAPMember
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.10.7.1.1
siteAPMember OBJECT-TYPE
SYNTAX INTEGER
{
notMember(0),
isMember(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the AP associated with this row is a member of the site
identified by siteID."
::= { siteAPEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.10.8
siteWlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF SiteWlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A site can have zero or more WLAN assigned to it. All WLANs that are associated
with a site are pushed to the all APs belonging to the site. This table defines
the assignment of various WLANs to various sites."
::= { sites 8 }
-- 1.3.6.1.4.1.4329.15.3.10.8.1
siteWlanEntry OBJECT-TYPE
SYNTAX SiteWlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry defining assignment of a WLAN identified by siteWlanID, to a site,
identified by siteID."
INDEX { siteID, wlanID, siteWlanApRadioIndex }
::= { siteWlanTable 1 }
SiteWlanEntry ::=
SEQUENCE {
siteWlanApRadioIndex
INTEGER,
siteWlanApRadioAssigned
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.10.8.1.1
siteWlanApRadioIndex OBJECT-TYPE
SYNTAX INTEGER (1..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { siteWlanEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.10.8.1.2
siteWlanApRadioAssigned OBJECT-TYPE
SYNTAX INTEGER
{
notAssigned(0),
assigned(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { siteWlanEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11
widsWips OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 11 }
-- 1.3.6.1.4.1.4329.15.3.11.1
mitigatorAnalysisEngine OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Mitigator analysis engine can be enabled/disabled using this variable.
All mitigator related objects, objects defined in widsWips subtree, can
only be accessed using SNMPv3 provided this variable is set to enable(1)
on behalf of users with privacy."
::= { widsWips 1 }
-- 1.3.6.1.4.1.4329.15.3.11.2
scanGroupMaxEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of scan groups that can be created on the device."
::= { widsWips 2 }
-- 1.3.6.1.4.1.4329.15.3.11.3
scanGroupsCurrentEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of scan groups currently have been created on the device."
::= { widsWips 3 }
-- 1.3.6.1.4.1.4329.15.3.11.4
activeThreatsCounts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of currently active threats that have been detected."
::= { widsWips 4 }
-- 1.3.6.1.4.1.4329.15.3.11.5
friendlyAPCounts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of friendly access points that have been discovered at this point."
::= { widsWips 5 }
-- 1.3.6.1.4.1.4329.15.3.11.6
uncategorizedAPCounts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of uncategorized access points that have been discovered. This value
refers to current number not the historical value."
::= { widsWips 6 }
-- 1.3.6.1.4.1.4329.15.3.11.11
widsWipsEngineTable OBJECT-TYPE
SYNTAX SEQUENCE OF WidsWipsEngineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of Mitigators defined on set of controllers each identified by
widsWipsEngineControllerIPAddress. "
::= { widsWips 11 }
-- 1.3.6.1.4.1.4329.15.3.11.11.1
widsWipsEngineEntry OBJECT-TYPE
SYNTAX WidsWipsEngineEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"One entry in this table identifying a mitigator engine in a defined
controller identified by IP address, widsWipsEngineControllerIPAddress."
INDEX { widsWipsEngineControllerIPAddress }
::= { widsWipsEngineTable 1 }
WidsWipsEngineEntry ::=
SEQUENCE {
widsWipsEngineRowStatus
RowStatus,
widsWipsEngineControllerIPAddress
IpAddress,
widsWipsEnginePollInterval
INTEGER,
widsWipsEnginePollRetry
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.11.11.1.1
widsWipsEngineRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus for creation/deletion of mitigator engine row."
::= { widsWipsEngineEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.11.1.2
widsWipsEngineControllerIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Ip address of the controller that the defined mitigator in this row will
run on."
::= { widsWipsEngineEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.11.1.3
widsWipsEnginePollInterval OBJECT-TYPE
SYNTAX INTEGER (3..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Poll interval in seconds between successive keep alive messages between
this controller and the mitigator engine to monitor status of mitigator
engine. "
::= { widsWipsEngineEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.11.1.4
widsWipsEnginePollRetry OBJECT-TYPE
SYNTAX INTEGER (0..20)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of consecutive retries of failed contact to a mitigator agent before
declaring mitigator engine dead. "
::= { widsWipsEngineEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.12
inServiceScanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF InServiceScanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"In service scan group enables the subsystem simultaneously scan for threats and
performs wireless bridging based on 37xx-based APs. The threats are discovered
and identified in the deployment environment and then classified for further
actions. "
::= { widsWips 12 }
-- 1.3.6.1.4.1.4329.15.3.11.12.1
inServiceScanGroupEntry OBJECT-TYPE
SYNTAX InServiceScanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table that defines attributes of a in-service scan group."
INDEX { scanGroupProfileID }
::= { inServiceScanGroupTable 1 }
InServiceScanGroupEntry ::=
SEQUENCE {
scanGroupProfileID
Unsigned32,
inSrvScanGrpName
DisplayString,
inSrvScanGrpSecurityThreats
INTEGER,
inSrvScanGrpMaxConcurrentAttacksPerAP
INTEGER,
inSrvScanGrpCounterMeasuresType
BITS,
inSrvScanGrpScan2400MHzSelection
BITS,
inSrvScanGrpScan5GHzSelection
BITS,
inSrvScanGrpblockAdHocClientsPeriod
Integer32,
inSrvScanGrpClassifySourceIF
INTEGER,
inSrvScanGrpRowStatus
RowStatus,
inSrvScanGrpDetectRogueAP
INTEGER,
inSrvScanGrpListeningPort
Integer32
}
-- 1.3.6.1.4.1.4329.15.3.11.12.1.1
scanGroupProfileID OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A internally unique identifier for a scan group. Each scan group is indexed
by this value."
::= { inServiceScanGroupEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.12.1.2
inSrvScanGrpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Textual description identifying the scan group."
::= { inServiceScanGroupEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.12.1.3
inSrvScanGrpSecurityThreats OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable security engine to scan for threats."
::= { inServiceScanGroupEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.12.1.4
inSrvScanGrpMaxConcurrentAttacksPerAP OBJECT-TYPE
SYNTAX INTEGER (0..6)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Max number of concurrent attacks per AP"
::= { inServiceScanGroupEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.12.1.5
inSrvScanGrpCounterMeasuresType OBJECT-TYPE
SYNTAX BITS
{
externalHoneypotAPs(0),
roamingToFriendlyAPs(1),
internalHoneypotAPs(2),
spoofedAPs(3),
dropFloodAttack(4),
removeDosAttack(5),
adHocModeDevice(6),
rogueAP(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"bit 0: Setting this bit prevents authorized stations from roaming to external honeypot APs.
bit 1: Setting this bit prevents authorized stations from roaming to friendly APs.
bit 2: Setting this bit prevents any station from using an internal honeypot AP.
bit 3: Setting this bit prevents any station from using a spoofed AP.
bit 4: Setting this bit drops frames in a controlled fashion during a flood attack.
bit 5: Setting this bit removes network access from clients originating DoS attacks.
bit 6: Setting this bit prevents any station from using an ad hoc mode device.
bit 7: Setting this bit prevents any station from using a rogue AP."
::= { inServiceScanGroupEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.11.12.1.6
inSrvScanGrpScan2400MHzSelection OBJECT-TYPE
SYNTAX BITS
{
frequency2412MHz(0),
frequency2417MHz(1),
frequency2422MHz(2),
frequency2427MHz(3),
frequency2432MHz(4),
frequency2437MHz(5),
frequency2442MHz(6),
frequency2447MHz(7),
frequency2452MHz(8),
frequency2457MHz(9),
frequency2462MHz(10),
frequency2467MHz(11),
frequency2472MHz(12),
frequency2484MHz(13)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"bit 0: by setting this bit scanning is performed on 2412 MHz frequency channel
bit 1: by setting this bit scanning is performed on 2417 MHz frequency channel
bit 2: by setting this bit scanning is performed on 2422 MHz frequency channel
bit 3: by setting this bit scanning is performed on 2427 MHz frequency channel
bit 4: by setting this bit scanning is performed on 2432 MHz frequency channel
bit 5: by setting this bit scanning is performed on 2437 MHz frequency channel
bit 6: by setting this bit scanning is performed on 2442 MHz frequency channel
bit 7: by setting this bit scanning is performed on 2447 MHz frequency channel
bit 8: by setting this bit scanning is performed on 2452 MHz frequency channel
bit 9: by setting this bit scanning is performed on 2457 MHz frequency channel
bit 10: by setting this bit scanning is performed on 2462 MHz frequency channel
bit 11: by setting this bit scanning is performed on 2467 MHz frequency channel
bit 12: by setting this bit scanning is performed on 2472 MHz frequency channel
bit 13: by setting this bit scanning is performed on 2484 MHz frequency channel"
::= { inServiceScanGroupEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.11.12.1.7
inSrvScanGrpScan5GHzSelection OBJECT-TYPE
SYNTAX BITS
{
frequency5040MHz(0),
frequency5060MHz(1),
frequency5080MHz(2),
frequency5180MHz(3),
frequency5200MHz(4),
frequency5220MHz(5),
frequency5240MHz(6),
frequency5260MHz(7),
frequency5280MHz(8),
frequency5300MHz(9),
frequency5320MHz(10),
frequency5500MHz(11),
frequency5520MHz(12),
frequency5540MHz(13),
frequency5560MHz(14),
frequency5580MHz(15),
frequency5600MHz(16),
frequency5620MHz(17),
frequency5640MHz(18),
frequency5660MHz(19),
frequency5680MHz(20),
frequency5700MHz(21),
frequency5745MHz(22),
frequency5765MHz(23),
frequency5785MHz(24),
frequency5805MHz(25),
frequency5825MHz(26),
frequency4920MHz(27),
frequency4940MHz(28),
frequency4960MHz(29),
frequency4980MHz(30)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"bit 0: by setting this bit scanning is performed on 5040 MHz frequency channel
bit 1: by setting this bit scanning is performed on 5060 MHz frequency channel
bit 2: by setting this bit scanning is performed on 5080 MHz frequency channel
bit 3: by setting this bit scanning is performed on 5180 MHz frequency channel
bit 4: by setting this bit scanning is performed on 5200 MHz frequency channel
bit 5: by setting this bit scanning is performed on 5220 MHz frequency channel
bit 6: by setting this bit scanning is performed on 5240 MHz frequency channel
bit 7: by setting this bit scanning is performed on 5260 MHz frequency channel
bit 8: by setting this bit scanning is performed on 5280 MHz frequency channel
bit 9: by setting this bit scanning is performed on 5300 MHz frequency channel
bit 10: by setting this bit scanning is performed on 5320 MHz frequency channel
bit 11: by setting this bit scanning is performed on 5500 MHz frequency channel
bit 12: by setting this bit scanning is performed on 5520 MHz frequency channel
bit 13: by setting this bit scanning is performed on 5540 MHz frequency channel
bit 14: by setting this bit scanning is performed on 5560 MHz frequency channel
bit 15: by setting this bit scanning is performed on 5580 MHz frequency channel
bit 16: by setting this bit scanning is performed on 5600 MHz frequency channel
bit 17: by setting this bit scanning is performed on 5620 MHz frequency channel
bit 18: by setting this bit scanning is performed on 5640 MHz frequency channel
bit 19: by setting this bit scanning is performed on 5660 MHz frequency channel
bit 20: by setting this bit scanning is performed on 5680 MHz frequency channel
bit 21: by setting this bit scanning is performed on 5700 MHz frequency channel
bit 22: by setting this bit scanning is performed on 5745 MHz frequency channel
bit 23: by setting this bit scanning is performed on 5765 MHz frequency channel
bit 24: by setting this bit scanning is performed on 5785 MHz frequency channel
bit 25: by setting this bit scanning is performed on 5805 MHz frequency channel
bit 26: by setting this bit scanning is performed on 5825 MHz frequency channel
bit 27: by setting this bit scanning is performed on 4920 MHz frequency channel
bit 28: by setting this bit scanning is performed on 4940 MHz frequency channel
bit 29: by setting this bit scanning is performed on 4960 MHz frequency channel
bit 30: by setting this bit scanning is performed on 4980 MHz frequency channel"
::= { inServiceScanGroupEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.11.12.1.8
inSrvScanGrpblockAdHocClientsPeriod OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of seconds removing network access to the clients that are in ad hoc mode."
::= { inServiceScanGroupEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.11.12.1.9
inSrvScanGrpClassifySourceIF OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable allows to enable/disable classify sources of interference"
::= { inServiceScanGroupEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.11.12.1.10
inSrvScanGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus field for creation/deletion or changing row status."
::= { inServiceScanGroupEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.11.12.1.11
inSrvScanGrpDetectRogueAP OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This enables/disables rogue AP detection."
::= { inServiceScanGroupEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.11.12.1.12
inSrvScanGrpListeningPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This OID represents the UDP port number that APs are to listen on while
performing rogue AP detection. It has meaning only when
inSrvScanGrpDetectRogueAP is enabled."
::= { inServiceScanGroupEntry 12 }
-- 1.3.6.1.4.1.4329.15.3.11.13
outOfServiceScanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF OutOfServiceScanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Out of service scan group is used to collect and classify various wireless
identifiers that are discovered in the deployment environment. Legacy
APs (26xx-based, 36xx-based) can participate in this subsystem if they are
configured for out-of-service scanning. The new APs, based on 37xx
architecture, can also participate in this subsystem."
::= { widsWips 13 }
-- 1.3.6.1.4.1.4329.15.3.11.13.1
outOfServiceScanGroupEntry OBJECT-TYPE
SYNTAX OutOfServiceScanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table that defines attributes of a out-of-service scan group."
INDEX { scanGroupProfileID }
::= { outOfServiceScanGroupTable 1 }
OutOfServiceScanGroupEntry ::=
SEQUENCE {
outOfSrvScanGrpName
DisplayString,
outOfSrvScanGrpRadio
INTEGER,
outOfSrvScanGrpChannelList
INTEGER,
outOfSrvScanGrpScanType
INTEGER,
outOfSrvScanGrpChannelDwellTime
INTEGER,
outOfSrvScanGrpScanTimeInterval
INTEGER,
outOfSrvScanGrpSecurityScan
INTEGER,
outOfSrvScanGrpScanActivity
INTEGER,
outOfSrvScanGrpScanRowStatus
Integer32
}
-- 1.3.6.1.4.1.4329.15.3.11.13.1.1
outOfSrvScanGrpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Human readable textual description identifying scan group."
::= { outOfServiceScanGroupEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.13.1.2
outOfSrvScanGrpRadio OBJECT-TYPE
SYNTAX INTEGER
{
radio1(1),
radio2(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Radio selection for the scan group. Selected radio will be used in sacn group."
::= { outOfServiceScanGroupEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.13.1.3
outOfSrvScanGrpChannelList OBJECT-TYPE
SYNTAX INTEGER
{
allChannel(0),
currentChannel(999)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifying the channel(s) which will be used for the defined scan group."
::= { outOfServiceScanGroupEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.13.1.4
outOfSrvScanGrpScanType OBJECT-TYPE
SYNTAX INTEGER
{
active(0),
passive(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field allows to select the type of scanning, active/passive, this
scan group will be executing."
::= { outOfServiceScanGroupEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.13.1.5
outOfSrvScanGrpChannelDwellTime OBJECT-TYPE
SYNTAX INTEGER (200..500)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Dwell time in mili-second for performing scanning."
::= { outOfServiceScanGroupEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.11.13.1.6
outOfSrvScanGrpScanTimeInterval OBJECT-TYPE
SYNTAX INTEGER (10..120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval between two sucssive scanning performed for this scan group."
::= { outOfServiceScanGroupEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.11.13.1.7
outOfSrvScanGrpSecurityScan OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field allows to enable/disable security Scan."
::= { outOfServiceScanGroupEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.11.13.1.8
outOfSrvScanGrpScanActivity OBJECT-TYPE
SYNTAX INTEGER
{
stop(0),
start(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Scaning can be started or stopped using this field."
::= { outOfServiceScanGroupEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.11.13.1.9
outOfSrvScanGrpScanRowStatus OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus field for the entry."
::= { outOfServiceScanGroupEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.11.14
scanGroupAPAssignmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF ScanGroupAPAssignmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of APs that have been assigned to a particular scan group, which
could include in-service and out-of-service scanning groups."
::= { widsWips 14 }
-- 1.3.6.1.4.1.4329.15.3.11.14.1
scanGroupAPAssignmentEntry OBJECT-TYPE
SYNTAX ScanGroupAPAssignmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table defining an AP assignment to a group, identified by
scanGroupProfileID."
INDEX { scanGroupProfileID, scanGroupAPAssignApSerial, widsWipsEngineControllerIPAddress }
::= { scanGroupAPAssignmentTable 1 }
ScanGroupAPAssignmentEntry ::=
SEQUENCE {
scanGroupAPAssignApSerial
OCTET STRING,
scanGroupAPAssignGroupName
DisplayString,
scanGroupAPAssignName
DisplayString,
scanGroupAPAssignRadio1
INTEGER,
scanGroupAPAssignRadio2
INTEGER,
scanGroupAPAssignInactiveAP
INTEGER,
scanGroupAPAssignAllowScanning
INTEGER,
scanGroupAPAssignAllowSpectrumAnalysis
INTEGER,
scanGroupAPAssignControllerIPAddress
IpAddress,
scanGroupAPAssignFordwardingService
BITS
}
-- 1.3.6.1.4.1.4329.15.3.11.14.1.1
scanGroupAPAssignApSerial OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique string of characters, a 16-character long, serial number of an access point."
::= { scanGroupAPAssignmentEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.14.1.2
scanGroupAPAssignGroupName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Human readable textual description identifying scan group."
::= { scanGroupAPAssignmentEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.14.1.3
scanGroupAPAssignName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Access Point (AP) name associated to this scan group."
::= { scanGroupAPAssignmentEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.14.1.4
scanGroupAPAssignRadio1 OBJECT-TYPE
SYNTAX INTEGER
{
off(0),
b(1),
g(2),
bg(3),
a(4),
j(8),
n(16),
gn(18),
bgn(19),
an(20),
nStrict(32),
gnStrict(34),
bgnStrict(35),
anStrict(36)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field allows the radio #1 of the AP to be turned on/off. this field has meaning only the AP assigned to legacy (outOfScan) scan profile"
::= { scanGroupAPAssignmentEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.14.1.5
scanGroupAPAssignRadio2 OBJECT-TYPE
SYNTAX INTEGER
{
off(0),
b(1),
g(2),
bg(3),
a(4),
j(8),
n(16),
gn(18),
bgn(19),
an(20),
nStrict(32),
gnStrict(34),
bgnStrict(35),
anStrict(36)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field allows the radio #2 of the AP to be turned on/off. this field has meaning
only the AP assigned to legacy (outOfScan) scan profile"
::= { scanGroupAPAssignmentEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.11.14.1.6
scanGroupAPAssignInactiveAP OBJECT-TYPE
SYNTAX INTEGER
{
inactive(0),
active(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This field allows to set the AP as active/inactive in scanning activities."
::= { scanGroupAPAssignmentEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.11.14.1.7
scanGroupAPAssignAllowScanning OBJECT-TYPE
SYNTAX INTEGER
{
notAllow(0),
allow(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting scanning to active/inactive using this AP."
::= { scanGroupAPAssignmentEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.11.14.1.8
scanGroupAPAssignAllowSpectrumAnalysis OBJECT-TYPE
SYNTAX INTEGER
{
notAllow(0),
allow(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting spectrum analysis to active/inactive using this AP."
::= { scanGroupAPAssignmentEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.11.14.1.9
scanGroupAPAssignControllerIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the controller to which the AP is connected currently."
::= { scanGroupAPAssignmentEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.11.14.1.10
scanGroupAPAssignFordwardingService OBJECT-TYPE
SYNTAX BITS
{
assignedToSite(0),
assignedToLoadGroup(1),
assignedToWlanService(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This OID lists the types of forwarding services that each Guardian is assigned to. A Guardian
will revert to providing these services when it is removed from the Guardian role. The meanings
of the individual flags are:
bit 0: Set if this AP is a member of a site.
bit 1: Set if this AP is assigned to a load group.
bit 2: Set if this AP is assigned to at least one WLAN service.
This OID is only relevant to APs in the Guardian role."
::= { scanGroupAPAssignmentEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.11.15
scanAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF ScanAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of sacn APs on each collector.
This table can be viewed only in v3 mode when the mitigator analys engine is enabled."
::= { widsWips 15 }
-- 1.3.6.1.4.1.4329.15.3.11.15.1
scanAPEntry OBJECT-TYPE
SYNTAX ScanAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table identifying one access point."
INDEX { scanAPControllerIPAddress, scanAPSerialNumber }
::= { scanAPTable 1 }
ScanAPEntry ::=
SEQUENCE {
scanAPControllerIPAddress
IpAddress,
scanAPSerialNumber
OCTET STRING,
scanAPAcessPointName
DisplayString,
scanAPRowStatus
RowStatus,
scanAPProfileName
DisplayString,
scanAPProfileType
INTEGER
}
-- 1.3.6.1.4.1.4329.15.3.11.15.1.1
scanAPControllerIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of the controller on which the scanning executed."
::= { scanAPEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.15.1.2
scanAPSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial number of the access point, 16-character human readable text, that
is assigned to this group."
::= { scanAPEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.15.1.3
scanAPAcessPointName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of the access point belonging to this group."
::= { scanAPEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.15.1.4
scanAPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status for the entry."
::= { scanAPEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.15.1.5
scanAPProfileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Name of the scan profile to which this access point is assigned."
::= { scanAPEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.11.15.1.6
scanAPProfileType OBJECT-TYPE
SYNTAX INTEGER
{
inServiceScan(1),
guardianScan(2),
outOfServiceScan(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"inServiceScan(1): access point is performed In service Scan.
guardianScan(2): access point is performed Guardian Scan.
outOfServiceScan(3): access point is performed out of service Scan(Legacy Scan)."
::= { scanAPEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.11.16
friendlyAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF FriendlyAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of Access Points that have been categorized as not being any threat to
the wireless network that is managed by EWC.
This table can be viewed only in v3 mode when the mitigator analys engine is enabled."
::= { widsWips 16 }
-- 1.3.6.1.4.1.4329.15.3.11.16.1
friendlyAPEntry OBJECT-TYPE
SYNTAX FriendlyAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table identifying an access points and some of its attributes."
INDEX { friendlyAPMacAddress }
::= { friendlyAPTable 1 }
FriendlyAPEntry ::=
SEQUENCE {
friendlyAPMacAddress
MacAddress,
friendlyAPSSID
DisplayString,
friendlyAPDescription
DisplayString,
friendlyAPManufacturer
DisplayString
}
-- 1.3.6.1.4.1.4329.15.3.11.16.1.1
friendlyAPMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Ethernet MAC address of the access point."
::= { friendlyAPEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.16.1.2
friendlyAPSSID OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSID broadcasted by the access point."
::= { friendlyAPEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.16.1.3
friendlyAPDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Textual description that is used to identify the access point."
::= { friendlyAPEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.16.1.4
friendlyAPManufacturer OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Textual description identifying the access point manufacturer."
::= { friendlyAPEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.17
uncategorizedAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF UncategorizedAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of APs that have not been categorized either as friendly, threat or
authorized."
::= { widsWips 17 }
-- 1.3.6.1.4.1.4329.15.3.11.17.1
uncategorizedAPEntry OBJECT-TYPE
SYNTAX UncategorizedAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry about an AP in this table."
INDEX { uncategorizedAPMAC }
::= { uncategorizedAPTable 1 }
UncategorizedAPEntry ::=
SEQUENCE {
uncategorizedAPMAC
MacAddress,
uncategorizedAPDescption
DisplayString,
uncategorizedAPManufacturer
DisplayString,
uncategorizedAPClassify
INTEGER,
uncategorizedAPSSID
DisplayString
}
-- 1.3.6.1.4.1.4329.15.3.11.17.1.1
uncategorizedAPMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC address of access point."
::= { uncategorizedAPEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.17.1.2
uncategorizedAPDescption OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Textual description of access point."
::= { uncategorizedAPEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.17.1.3
uncategorizedAPManufacturer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Access point manufacturer."
::= { uncategorizedAPEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.17.1.4
uncategorizedAPClassify OBJECT-TYPE
SYNTAX INTEGER
{
noAction(0),
clasifyAsAuthorized(1),
classifyAsFriendlyAP(2),
clasifyAsThreatForReport(3),
clasifyAsInternalHoneypotThreat(4),
clasifyAsExternalHoneypotThreat(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"By setting this field, access point can be reclassified and moved to
different group."
::= { uncategorizedAPEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.17.1.5
uncategorizedAPSSID OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID broadcasted by the access point."
::= { uncategorizedAPEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.11.18
authorizedAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF AuthorizedAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of authorized access point."
::= { widsWips 18 }
-- 1.3.6.1.4.1.4329.15.3.11.18.1
authorizedAPEntry OBJECT-TYPE
SYNTAX AuthorizedAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table describing an authorized AP."
INDEX { authorizedAPMAC }
::= { authorizedAPTable 1 }
AuthorizedAPEntry ::=
SEQUENCE {
authorizedAPMAC
MacAddress,
authorizedAPDescription
DisplayString,
authorizedAPManufacturer
DisplayString,
authorizedAPClassify
INTEGER,
authorizedAPRowStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.11.18.1.1
authorizedAPMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC address of access point."
::= { authorizedAPEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.18.1.2
authorizedAPDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Discription of the access point."
::= { authorizedAPEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.18.1.3
authorizedAPManufacturer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Access point's manufacturer. This field is cannot be set and it is deduced
by MAC addressed."
::= { authorizedAPEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.18.1.4
authorizedAPClassify OBJECT-TYPE
SYNTAX INTEGER
{
noAction(0),
classifyAsFriendlyAP(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"By setting this field, access point can be reclassified and moved to
different group."
::= { authorizedAPEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.18.1.5
authorizedAPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Action permitted are 'delete/add' row."
::= { authorizedAPEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.11.19
prohibitedAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF ProhibitedAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of prohibited access points."
::= { widsWips 19 }
-- 1.3.6.1.4.1.4329.15.3.11.19.1
prohibitedAPEntry OBJECT-TYPE
SYNTAX ProhibitedAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table describing an access point."
INDEX { prohibitedAPMAC }
::= { prohibitedAPTable 1 }
ProhibitedAPEntry ::=
SEQUENCE {
prohibitedAPMAC
MacAddress,
prohibitedAPCategory
INTEGER,
prohibitedAPDescription
DisplayString,
prohibitedAPManufacturer
DisplayString,
prohibitedAPClassify
INTEGER,
prohibitedAPRowStatus
RowStatus
}
-- 1.3.6.1.4.1.4329.15.3.11.19.1.1
prohibitedAPMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MAC address of access point."
::= { prohibitedAPEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.19.1.2
prohibitedAPCategory OBJECT-TYPE
SYNTAX INTEGER
{
notAvailable(0),
reportPresenceOnly(65529),
externalHoneyPot(65530),
internalHoneyPot(65531),
friendly(65532),
perauthorized(65533),
authorized(65534)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The category the access point in this row belongs to."
::= { prohibitedAPEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.19.1.3
prohibitedAPDescription OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description of the access point."
::= { prohibitedAPEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.19.1.4
prohibitedAPManufacturer OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Access point's manufacturer. This field is cannot be set and it is deduced
by MAC addressed."
::= { prohibitedAPEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.19.1.5
prohibitedAPClassify OBJECT-TYPE
SYNTAX INTEGER
{
classifyAsFriendlyAP(1),
noAction(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"By setting this field, access point can be reclassified and moved to
different group."
::= { prohibitedAPEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.11.19.1.6
prohibitedAPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Action permitted are 'delete/add' row."
::= { prohibitedAPEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.11.20
dedicatedScanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF DedicatedScanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"dedicated scan group enables the subsystem full time scan for threats based
on 37xx-based APs. The threats are discovered and identified in the deployment
environment and then classified for further actions. "
::= { widsWips 20 }
-- 1.3.6.1.4.1.4329.15.3.11.20.1
dedicatedScanGroupEntry OBJECT-TYPE
SYNTAX DedicatedScanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table that defines attributes of a dedicated scan group."
INDEX { scanGroupProfileID }
::= { dedicatedScanGroupTable 1 }
DedicatedScanGroupEntry ::=
SEQUENCE {
dedicatedScanGrpName
DisplayString,
dedicatedScanGrpSecurityThreats
INTEGER,
dedicatedScanGrpMaxConcurrentAttacksPerAP
Integer32,
dedicatedScanGrpCounterMeasures
BITS,
dedicatedScanGrpScan2400MHzFreq
BITS,
dedicatedScanGrpScan5GHzFreq
BITS,
dedicatedScanGrpBlockAdHocPeriod
Integer32,
dedicatedScanGrpClassifySourceIF
INTEGER,
dedicatedScanGrpRowStatus
RowStatus,
dedicatedScanGrpDetectRogueAP
INTEGER,
dedicatedScanGrpListeningPort
Integer32
}
-- 1.3.6.1.4.1.4329.15.3.11.20.1.1
dedicatedScanGrpName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Textual description identifying the scan group."
::= { dedicatedScanGroupEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.20.1.2
dedicatedScanGrpSecurityThreats OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Enable/disable security engine to scan for threats."
::= { dedicatedScanGroupEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.20.1.3
dedicatedScanGrpMaxConcurrentAttacksPerAP OBJECT-TYPE
SYNTAX Integer32 (0..6)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Max number of concurrent attacks per AP"
::= { dedicatedScanGroupEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.20.1.4
dedicatedScanGrpCounterMeasures OBJECT-TYPE
SYNTAX BITS
{
externalHoneypotAPs(0),
roamingToFriendlyAPs(1),
internalHoneypotAPs(2),
spoofedAPs(3),
dropFloodAttack(4),
removeDosAttack(5),
adHocModeDevice(6),
rogueAP(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"bit 0: Setting this bit prevents authorized stations from roaming to external honeypot APs.
bit 1: Setting this bit prevents authorized stations from roaming to friendly APs.
bit 2: Setting this bit prevents any station from using an internal honeypot AP.
bit 3: Setting this bit prevents any station from using a spoofed AP.
bit 4: Setting this bit drops frames in a controlled fashion during a flood attack.
bit 5: Setting this bit removes network access from clients originating DoS attacks.
bit 6: Setting this bit prevents any station from using an ad hoc mode device.
bit 7: Setting this bit prevents any station from using a rogue AP."
::= { dedicatedScanGroupEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.20.1.5
dedicatedScanGrpScan2400MHzFreq OBJECT-TYPE
SYNTAX BITS
{
frequency2412MHz(0),
frequency2417MHz(1),
frequency2422MHz(2),
frequency2427MHz(3),
frequency2432MHz(4),
frequency2437MHz(5),
frequency2442MHz(6),
frequency2447MHz(7),
frequency2452MHz(8),
frequency2457MHz(9),
frequency2462MHz(10),
frequency2467MHz(11),
frequency2472MHz(12),
frequency2484MHz(13)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"bit 0: by setting this bit scanning is performed on 2412 MHz frequency channel
bit 1: by setting this bit scanning is performed on 2417 MHz frequency channel
bit 2: by setting this bit scanning is performed on 2422 MHz frequency channel
bit 3: by setting this bit scanning is performed on 2427 MHz frequency channel
bit 4: by setting this bit scanning is performed on 2432 MHz frequency channel
bit 5: by setting this bit scanning is performed on 2437 MHz frequency channel
bit 6: by setting this bit scanning is performed on 2442 MHz frequency channel
bit 7: by setting this bit scanning is performed on 2447 MHz frequency channel
bit 8: by setting this bit scanning is performed on 2452 MHz frequency channel
bit 9: by setting this bit scanning is performed on 2457 MHz frequency channel
bit 10: by setting this bit scanning is performed on 2462 MHz frequency channel
bit 11: by setting this bit scanning is performed on 2467 MHz frequency channel
bit 12: by setting this bit scanning is performed on 2472 MHz frequency channel
bit 13: by setting this bit scanning is performed on 2484 MHz frequency channel"
::= { dedicatedScanGroupEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.11.20.1.6
dedicatedScanGrpScan5GHzFreq OBJECT-TYPE
SYNTAX BITS
{
frequency5040MHz(0),
frequency5060MHz(1),
frequency5080MHz(2),
frequency5180MHz(3),
frequency5200MHz(4),
frequency5220MHz(5),
frequency5240MHz(6),
frequency5260MHz(7),
frequency5280MHz(8),
frequency5300MHz(9),
frequency5320MHz(10),
frequency5500MHz(11),
frequency5520MHz(12),
frequency5540MHz(13),
frequency5560MHz(14),
frequency5580MHz(15),
frequency5600MHz(16),
frequency5620MHz(17),
frequency5640MHz(18),
frequency5660MHz(19),
frequency5680MHz(20),
frequency5700MHz(21),
frequency5745MHz(22),
frequency5765MHz(23),
frequency5785MHz(24),
frequency5805MHz(25),
frequency5825MHz(26),
frequency4920MHz(27),
frequency4940MHz(28),
frequency4960MHz(29),
frequency4980MHz(30)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"bit 0: by setting this bit scanning is performed on 5040 MHz frequency channel
bit 1: by setting this bit scanning is performed on 5060 MHz frequency channel
bit 2: by setting this bit scanning is performed on 5080 MHz frequency channel
bit 3: by setting this bit scanning is performed on 5180 MHz frequency channel
bit 4: by setting this bit scanning is performed on 5200 MHz frequency channel
bit 5: by setting this bit scanning is performed on 5220 MHz frequency channel
bit 6: by setting this bit scanning is performed on 5240 MHz frequency channel
bit 7: by setting this bit scanning is performed on 5260 MHz frequency channel
bit 8: by setting this bit scanning is performed on 5280 MHz frequency channel
bit 9: by setting this bit scanning is performed on 5300 MHz frequency channel
bit 10: by setting this bit scanning is performed on 5320 MHz frequency channel
bit 11: by setting this bit scanning is performed on 5500 MHz frequency channel
bit 12: by setting this bit scanning is performed on 5520 MHz frequency channel
bit 13: by setting this bit scanning is performed on 5540 MHz frequency channel
bit 14: by setting this bit scanning is performed on 5560 MHz frequency channel
bit 15: by setting this bit scanning is performed on 5580 MHz frequency channel
bit 16: by setting this bit scanning is performed on 5600 MHz frequency channel
bit 17: by setting this bit scanning is performed on 5620 MHz frequency channel
bit 18: by setting this bit scanning is performed on 5640 MHz frequency channel
bit 19: by setting this bit scanning is performed on 5660 MHz frequency channel
bit 20: by setting this bit scanning is performed on 5680 MHz frequency channel
bit 21: by setting this bit scanning is performed on 5700 MHz frequency channel
bit 22: by setting this bit scanning is performed on 5745 MHz frequency channel
bit 23: by setting this bit scanning is performed on 5765 MHz frequency channel
bit 24: by setting this bit scanning is performed on 5785 MHz frequency channel
bit 25: by setting this bit scanning is performed on 5805 MHz frequency channel
bit 26: by setting this bit scanning is performed on 5825 MHz frequency channel
bit 27: by setting this bit scanning is performed on 4920 MHz frequency channel
bit 28: by setting this bit scanning is performed on 4940 MHz frequency channel
bit 29: by setting this bit scanning is performed on 4960 MHz frequency channel
bit 30: by setting this bit scanning is performed on 4980 MHz frequency channel"
::= { dedicatedScanGroupEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.11.20.1.7
dedicatedScanGrpBlockAdHocPeriod OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of seconds removing network access to the clients that are in ad hoc mode."
::= { dedicatedScanGroupEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.11.20.1.8
dedicatedScanGrpClassifySourceIF OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable allows to enable/disable classify sources of interference"
::= { dedicatedScanGroupEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.11.20.1.9
dedicatedScanGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"RowStatus field for creation/deletion or changing row status."
::= { dedicatedScanGroupEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.11.20.1.10
dedicatedScanGrpDetectRogueAP OBJECT-TYPE
SYNTAX INTEGER
{
disable(0),
enable(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This enables/disables rogue AP detection."
::= { dedicatedScanGroupEntry 10 }
-- 1.3.6.1.4.1.4329.15.3.11.20.1.11
dedicatedScanGrpListeningPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable has meaning only when dedicatedScanGrpDetectRogueAP is enabled.
The port number is the port for listening for rogue AP detection."
::= { dedicatedScanGroupEntry 11 }
-- 1.3.6.1.4.1.4329.15.3.11.30
widsWipsReport OBJECT IDENTIFIER ::= { widsWips 30 }
-- 1.3.6.1.4.1.4329.15.3.11.30.1
activeThreatTable OBJECT-TYPE
SYNTAX SEQUENCE OF ActiveThreatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of active threats that have been discovered to this point of time."
::= { widsWipsReport 1 }
-- 1.3.6.1.4.1.4329.15.3.11.30.1.1
activeThreatEntry OBJECT-TYPE
SYNTAX ActiveThreatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table describing an idividual threat charactersitics and
attributes."
INDEX { activeThreatIndex }
::= { activeThreatTable 1 }
ActiveThreatEntry ::=
SEQUENCE {
activeThreatIndex
Unsigned32,
activeThreatCategory
DisplayString,
activeThreatDeviceMAC
MacAddress,
activeThreatDateTime
DisplayString,
activeThreatCounterMeasure
INTEGER,
activeThreatAPName
DisplayString,
activeThreatRSS
DisplayString,
activeThreatExtraDetails
DisplayString,
activeThreatThreat
DisplayString
}
-- 1.3.6.1.4.1.4329.15.3.11.30.1.1.1
activeThreatIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internally generated number without any significat meaning except used
as indexing in this table."
::= { activeThreatEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.30.1.1.2
activeThreatCategory OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Textual description describing the type of the threat."
::= { activeThreatEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.30.1.1.3
activeThreatDeviceMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the device that the threat appears to be originated."
::= { activeThreatEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.30.1.1.4
activeThreatDateTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Date and time the threat was discovered. "
::= { activeThreatEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.30.1.1.5
activeThreatCounterMeasure OBJECT-TYPE
SYNTAX INTEGER
{
noCounterMeasure(0),
rateLimit(1),
preventUse(2),
preventRoaming(4),
blacklisted(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter measure has been taken to tackle the threat."
::= { activeThreatEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.11.30.1.1.6
activeThreatAPName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the access point."
::= { activeThreatEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.11.30.1.1.7
activeThreatRSS OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signal strength of the device considered to be a threat."
::= { activeThreatEntry 7 }
-- 1.3.6.1.4.1.4329.15.3.11.30.1.1.8
activeThreatExtraDetails OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Extra comments related to the threat."
::= { activeThreatEntry 8 }
-- 1.3.6.1.4.1.4329.15.3.11.30.1.1.9
activeThreatThreat OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Textual description of the threat."
::= { activeThreatEntry 9 }
-- 1.3.6.1.4.1.4329.15.3.11.30.2
countermeasureAPTable OBJECT-TYPE
SYNTAX SEQUENCE OF CountermeasureAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of APs engaged in countermeasure activities to thwart coming threats."
::= { widsWipsReport 2 }
-- 1.3.6.1.4.1.4329.15.3.11.30.2.1
countermeasureAPEntry OBJECT-TYPE
SYNTAX CountermeasureAPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table identifying an AP engaged in countermeasure activities."
INDEX { countermeasureAPSerial, countermeasureAPThreatIndex }
::= { countermeasureAPTable 1 }
CountermeasureAPEntry ::=
SEQUENCE {
countermeasureAPThreatIndex
Unsigned32,
countermeasureAPSerial
DisplayString,
countermeasureAPName
DisplayString,
countermeasureAPThreatCategory
DisplayString,
countermeasureAPCountermeasure
DisplayString,
countermeasureAPTime
DisplayString
}
-- 1.3.6.1.4.1.4329.15.3.11.30.2.1.1
countermeasureAPThreatIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internally generated index of the access point taking part in countermeasure."
::= { countermeasureAPEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.30.2.1.2
countermeasureAPSerial OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Serial number of the access point taking part in countermeasure."
::= { countermeasureAPEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.30.2.1.3
countermeasureAPName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the access point taking part in countermeasure."
::= { countermeasureAPEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.30.2.1.4
countermeasureAPThreatCategory OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Textual description of the threat category that countermeasure action
is aimed at."
::= { countermeasureAPEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.30.2.1.5
countermeasureAPCountermeasure OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Countermeasure has been taken to thwart the threat."
::= { countermeasureAPEntry 5 }
-- 1.3.6.1.4.1.4329.15.3.11.30.2.1.6
countermeasureAPTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that the countermeasure has started."
::= { countermeasureAPEntry 6 }
-- 1.3.6.1.4.1.4329.15.3.11.30.3
blacklistedClientTable OBJECT-TYPE
SYNTAX SEQUENCE OF BlacklistedClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of clients that have been blacklisted due to preceived threats they
may pose to the safe functioning of the operating network."
::= { widsWipsReport 3 }
-- 1.3.6.1.4.1.4329.15.3.11.30.3.1
blacklistedClientEntry OBJECT-TYPE
SYNTAX BlacklistedClientEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table pertaining information about the MU that has been
blacklisted."
INDEX { blacklistedClientMAC }
::= { blacklistedClientTable 1 }
BlacklistedClientEntry ::=
SEQUENCE {
blacklistedClientMAC
MacAddress,
blacklistedClientStatTime
DisplayString,
blacklistedClientEndTime
DisplayString,
blacklistedClientReason
DisplayString
}
-- 1.3.6.1.4.1.4329.15.3.11.30.3.1.1
blacklistedClientMAC OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the client."
::= { blacklistedClientEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.30.3.1.2
blacklistedClientStatTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time blacklisting started."
::= { blacklistedClientEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.30.3.1.3
blacklistedClientEndTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time blacklisting ends."
::= { blacklistedClientEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.30.3.1.4
blacklistedClientReason OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Reason for blacklisting the client."
::= { blacklistedClientEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.11.30.4
threatSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF ThreatSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Summary of all threats that have been detected in the network by wireless
controller system."
::= { widsWipsReport 4 }
-- 1.3.6.1.4.1.4329.15.3.11.30.4.1
threatSummaryEntry OBJECT-TYPE
SYNTAX ThreatSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry summarizing statistics about a category of a threat."
INDEX { threatSummaryIndex }
::= { threatSummaryTable 1 }
ThreatSummaryEntry ::=
SEQUENCE {
threatSummaryIndex
Unsigned32,
threatSummaryCategory
DisplayString,
threatSummaryActiveThreat
Unsigned32,
threatSummaryHistoricalCounts
Unsigned32
}
-- 1.3.6.1.4.1.4329.15.3.11.30.4.1.1
threatSummaryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Internally generated index."
::= { threatSummaryEntry 1 }
-- 1.3.6.1.4.1.4329.15.3.11.30.4.1.2
threatSummaryCategory OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Textul description identifying the category of a threat."
::= { threatSummaryEntry 2 }
-- 1.3.6.1.4.1.4329.15.3.11.30.4.1.3
threatSummaryActiveThreat OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counts of threats that are currently active."
::= { threatSummaryEntry 3 }
-- 1.3.6.1.4.1.4329.15.3.11.30.4.1.4
threatSummaryHistoricalCounts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Historical counts of such threat that were detected in the past by the
wireless controller system."
::= { threatSummaryEntry 4 }
-- 1.3.6.1.4.1.4329.15.3.19
apNotifications OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 19 }
-- 1.3.6.1.4.1.4329.15.3.19.1
apEventId OBJECT-TYPE
SYNTAX INTEGER {
apPollTimeout(1),
apRegister(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifies event associated with AP or AP tunnel:
apPollTimeout - an event triggered when the AP disconnects from the controller.
apRegister - an event triggered when the AP connects to the controller."
::= { apNotifications 1 }
-- 1.3.6.1.4.1.4329.15.3.19.2
apEventDescription OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the description of the most recently triggered event."
::= { apNotifications 2 }
-- 1.3.6.1.4.1.4329.15.3.19.3
apEventAPSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"16-character serial number of the AP."
::= { apNotifications 3 }
-- 1.3.6.1.4.1.4329.15.3.19.4
apTunnelAlarm NOTIFICATION-TYPE
OBJECTS { apEventId, apEventDescription, apEventAPSerialNumber }
STATUS current
DESCRIPTION
"alarm associated with AP and AP interface."
::= { apNotifications 4 }
-- 1.3.6.1.4.1.4329.15.3.20
stationSessionNotifications OBJECT IDENTIFIER
::= { hiPathWirelessMgmt 20 }
-- 1.3.6.1.4.1.4329.15.3.20.1
stationEventType OBJECT-TYPE
SYNTAX INTEGER
{
registration(0),
deRegistration(1),
stateChange(2),
registrationFailed(3),
roam(4),
mbaTimeout(5),
mbaAccepted(6),
mbaRejected(7),
authorizationChanged(8),
authentication(9),
authenticationFailed(10),
locationUpdate(11),
areaChange(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"station event type include:
registration(0): MU registration.
deRegistration(1): MU de-registration.
stateChange(2): MU state changed.
registrationFailed(3): MU registration failure.
roam(4): MU roam.
mbaTimeout(5): MU MAC-Based-Authentication time out.
mbaAccepted(6): MU MAC-Based-Authentication accepted.
mbaRejected(7): MU MAC-Based-Authentication rejected.
authorizationChanged(8): MU authorization changed.
authentication(9): MU authentication.
authenticationFailed(10): MU authentication failure.
locationUpdate(11): MU location updated.
areaChange(12): MU roamed to other area."
::= { stationSessionNotifications 1 }
-- 1.3.6.1.4.1.4329.15.3.20.2
stationMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address of the station that is the subject of this event report."
::= { stationSessionNotifications 2 }
-- 1.3.6.1.4.1.4329.15.3.20.3
stationIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP address of the station that is the subject of this event report."
::= { stationSessionNotifications 3 }
-- 1.3.6.1.4.1.4329.15.3.20.4
stationAPName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"name of the AP which station associated with"
::= { stationSessionNotifications 4 }
-- 1.3.6.1.4.1.4329.15.3.20.5
stationAPSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SSID broadcasted by the access point which station connected to"
::= { stationSessionNotifications 5 }
-- 1.3.6.1.4.1.4329.15.3.20.6
stationDetailEvent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "detail description of the station event"
::= { stationSessionNotifications 6 }
-- 1.3.6.1.4.1.4329.15.3.20.7
stationRoamedAPName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"name of the access point which station roamed from"
::= { stationSessionNotifications 7 }
-- 1.3.6.1.4.1.4329.15.3.20.8
stationName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"name of station"
::= { stationSessionNotifications 8 }
-- 1.3.6.1.4.1.4329.15.3.20.9
stationBSSID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"the Mac address of the radio which station connect to"
::= { stationSessionNotifications 9 }
-- 1.3.6.1.4.1.4329.15.3.20.10
stationEventTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The duration in hundredths of a second from the network agent start time
to the time of generation of the station event."
::= { stationSessionNotifications 10 }
-- 1.3.6.1.4.1.4329.15.3.20.11
stationEventAlarm NOTIFICATION-TYPE
OBJECTS { stationEventType, stationMacAddress, stationIPAddress, stationAPName,stationAPSSID,
stationDetailEvent, stationRoamedAPName, stationName,stationBSSID, stationEventTimeStamp,
stationIPv6Address1, stationIPv6Address2, stationIPv6Address3
}
STATUS current
DESCRIPTION
"A trap describing a significant event that happened to a station during a session
on the network. A controller can sees hundreds or even thousands of these events
every second."
::= { stationSessionNotifications 11 }
-- 1.3.6.1.4.1.4329.15.3.20.12
stationIPv6Address1 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One of the IPv6 addresses of the station that is the subject of this event report."
::= { stationSessionNotifications 12 }
-- 1.3.6.1.4.1.4329.15.3.20.13
stationIPv6Address2 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One of the IPv6 addresses of the station that is the subject of this event report."
::= { stationSessionNotifications 13 }
-- 1.3.6.1.4.1.4329.15.3.20.14
stationIPv6Address3 OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One of the IPv6 addresses of the station that is the subject of this event report."
::= { stationSessionNotifications 14 }
-- 1.3.6.1.4.1.4329.15.3.30
hiPathWirelessHWCConformance OBJECT IDENTIFIER ::= { hiPathWirelessMgmt 30 }
-- 1.3.6.1.4.1.4329.15.3.30.1
hiPathWirelessHWCModule MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Conformance definition for the EWC MIB."
MODULE -- this module
MANDATORY-GROUPS { hiPathWirelessHWCGroup, layerTwoPortGroup, muGroup, apStatsGroup, muACLGroup,
siteGroup, sitePolicyGroup, siteCosGroup, siteAPGroup, siteWlanGroup,
apGroup, wlanGroup, wlanStatsGroup, topologyGroup, topologyStatGroup,
loadGroup,
outOfServiceScanGroup, widsWipsEngineGroup, widsWipsObjectsGroup,
scanGroupAPAssignmentGroup, inServiceScanGroup,
wlanSecurityReportGroup, friendlyAPGroup, scanAPGroup,
activeThreatGroup, muAccessListGroup, apAntennaGroup,
threatSummaryGroup, blaclistedClientGroup, countermeasureAPGroup,
apByChannelGroup, stationsByProtocolGroup, licensingInformationGroup ,
dedicatedScanGroup, prohibitedAPGroup, authorizedAPGroup, uncategorizedAPGroup,
radiusFastFailoverEventsGroup, dhcpRelayListenersGroup,
apRadioAntennaGroup, authenticationAdvancedGroup, radiusExtnsSettingGroup
}
::= { hiPathWirelessHWCConformance 1 }
-- 1.3.6.1.4.1.4329.15.3.30.2
hiPathWirelessHWCGroup OBJECT-GROUP
OBJECTS { sysSoftwareVersion, sysCPUType, sysLogLevel, logEventSeverityThreshold,
logEventSeverity, logEventComponent,
apLogCollectionEnable, apLogFrequency, apLogDestination, apLogUserId,
apLogServerIP, apLogDirectory, apLogPassword, apLogFTProtocol, select,
apLogQuickSelectedOption,
apLogFileCopyDestination, apLogFileCopyProtocol, apLogFileCopyServerIP, apLogFileCopyUserID,
apLogFileCopyPassword, apLogFileCopyServerDirectory, apLogFileCopyOperation, apLogFileCopyOperationStatus,
apLogFileCopyRowStatus, apLogFileUtilityLimit, apLogFileUtilityCurrent,
logEventDescription, apEventId, apEventDescription, apEventAPSerialNumber, assocTxPackets,
assocRxPackets, assocTxOctets, assocRxOctets, assocDuration, assocCount,
assocMUMacAddress, assocStartSysUpTime, mobileUnitCount, vnsIfIndex, radioVNSRowStatus,
radioIfIndex, vnsFilterRulePortLow, vnsFilterRulePortHigh, cpURL, vnsDHCPRangeIndex,
vns3rdPartyAP, vnsUseDHCPRelay, vnsMgmtTrafficEnable, vnsAuthModel, physicalPortCount,
mgmtPortIfIndex, mgmtPortHostname, mgmtPortDomain, vnRole, vnIfIndex,
vnHeartbeatInterval, ntpEnabled, ntpTimezone, ntpTimeServer1, ntpTimeServer2,
ntpTimeServer3, tunnelCount, vnsCount, vnsDescription, vnsMUSessionTimeout,
vnsAllowMulticast, vnsSSID, vnsDomain, vnsDNSServers, vnsWINSServers,
vnsStatus, vnsDHCPRangeStart, vnsDHCPRangeEnd, vnsDHCPRangeType, vnsDHCPRangeStatus,
vnsRadiusServerPort, vnsRadiusServerRetries, vnsRadiusServerTimeout, vnsRadiusServerSharedSecret, vnsRadiusServerNASIdentifier,
vnsRadiusServerAuthType, vnsRadiusServerRowStatus, vnsFilterID, vnsFilterIDStatus, vnsFilterRuleOrder,
vnsFilterRuleDirection, vnsFilterRuleAction, vnsFilterRuleIPAddress, vnsFilterRuleProtocol, vnsFilterRuleEtherType,
vnsFilterRuleStatus, vnsPrivWEPKeyType, vnsPrivDynamicRekeyFrequency, vnsPrivWEPKeyLength, vnsPrivWPA1Enabled,
vnsPrivUseSharedKey, vnsPrivWPASharedKey, vnsWEPKeyIndex, vnsWEPKeyValue, activeVNSSessionCount,
apCount, cpReplaceGatewayWithFQDN, cpDefaultRedirectionURL, cpConnectionIP, cpConnectionPort,
cpSharedSecret, cpLogOff, cpStatusCheck, cpType, apMacAddress,
serviceLogFacility, sysLogServerIP, sysLogServerPort, sysLogServerRowStatus, sysLogServerIndex,
apActiveCount, sysLogServerEnabled, assocVnsIfIndex, apRadioFrequency, includeAllServiceMessages,
tunnelStartIP, tunnelStartHWC, tunnelEndIP, tunnelEndHWC, apBroadcastDisassociate,
sysSerialNo, vnsPrivWPA2Enabled, tunnelStatus, hiPathWirelessAppLogFacility, vnsVlanID,
vnsMgmIpAddress, maxVoiceBWforReassociation, maxVoiceBWforAssociation, maxVideoBWforReassociation, maxVideoBWforAssociation,
maxBestEffortBWforReassociation, maxBestEffortBWforAssociation, maxBackgroundBWforReassociation, maxBackgroundBWforAssociation,
physicalPortsInternalVlanID, vnsMode, vnsQoSPriorityOverrideFlag, vnsQoSPriorityOverrideSC, vnsQoSPriorityOverrideDSCP,
netflowDestinationIP, netflowInterval, mirrorFirstN, mirrorL2Ports,
vnsQoSClassificationServiceClass, vnsQoSWirelessLegacyFlag, vnsQoSWirelessWMMFlag, vnsQoSWireless80211eFlag, vnsQoSWirelessTurboVoiceFlag,
vnsQoSWirelessEnableUAPSD, vnsQoSWirelessUseAdmControlVoice, vnsSuppressSSID, vnsEnable11hSupport, vnsApplyPowerBackOff,
vnsProcessClientIEReq, vnsQoSWirelessUseAdmControlVideo, vnsInterfaceName, vnsQoSWirelessULPolicerAction, vnsQoSWirelessDLPolicerAction,
vnsQoSWirelessUseAdmControlBestEffort, vnsQoSWirelessUseAdmControlBackground,
tspecMuMACAddress, tspecAC, tspecDirection, tspecApSerialNumber, tspecMuIPAddress,
tspecBssMac, tspecSsid, tspecMDR, tspecNMS, tspecSBA,
tspecDlRate, tspecUlRate, tspecDlViolations, tspecUlViolations, tspecProtocol,
vnsDLSSupportEnable, vnsDLSAddress, vnsDLSPort, vnsSessionAvailabilityEnable, ntpServerEnabled,
primaryDNS, secondaryDNS, tertiaryDNS, physicalFlash, jumboFrames, vnsRadiusServerName,
vnsRadiusServerNasAddress, dasReplayInterval, dasPort, vnsEnabled, vnsAPFilterRuleOrder,
vnsAPFilterRuleDirection, vnsAPFilterAction, vnsAPFilterIPAddress, vnsAPFilterMask, vnsAPFilterPortLow,
vnsAPFilterPortHigh, vnsAPFilterProtocol, vnsAPFilterEtherType, vnsAPFilterRowStatus, vnsStrictSubnetAdherence,
vnsSLPEnabled, imagePath36xx, imagePath26xx, tftpSever, imageVersionOfap26xx,
imageVersionOfngap36xx, topoExceptionFiterName, topoExceptionStatPktsDenied, topoExceptionStatPktsAllowed, synchronizeSystemConfig,
availabilityStatus, pairIPAddress, hwcAvailabilityRank, fastFailover, synchronizeGuestPort,
tunnelStatsTxBytes, apRegistrationRequests, vnForeignClients, vnLocalClients, apStatsSessionDuration,
detectLinkFailure, apRegUseClusterEncryption, apRegClusterSharedSecret, apRegDiscoveryRetries, apRegDiscoveryInterval,
apRegTelnetPassword, apRegSSHPassword, apRegSecurityMode, vnTotalClients, tunnelStatsRxBytes,
tunnelStatsTxRxBytes, tunnelsTxRxBytes,
clearAccessRejectMsg, armCount, armReplyMessage,
apLinkTimeout, apFastFailoverEnable, topoStatFrameTooLongErrors,
topoStatFrameChkSeqErrors, vnsConfigWLANID, wlanVNSID, wlanPrivPrivacyType, wlanPrivWEPKeyIndex,
wlanPrivWEPKeyLength, wlanPrivWEPKey, wlanPrivWPAv1EncryptionType, wlanPrivWPAv2EncryptionType, wlanPrivKeyManagement,
wlanPrivBroadcastRekeying, wlanPrivRekeyInterval, wlanPrivGroupKPSR, wlanPrivWPAPSK, wlanPrivWPAversion,
wlanPrivfastTransition, wlanPrivManagementFrameProtection, wlanAuthType,
wlanAuthMacBasedAuth, wlanAuthMACBasedAuthOnRoam, wlanAuthAutoAuthAuthorizedUser, wlanAuthAllowUnauthorizedUser, wlanAuthRadiusIncludeAP,
wlanAuthRadiusIncludeVNS, wlanAuthRadiusIncludeSSID, wlanAuthRadiusIncludePolicy, wlanAuthRadiusIncludeTopology, wlanAuthRadiusIncludeIngressRC,
wlanAuthRadiusIncludeEgressRC, wlanAuthCollectAcctInformation, wlanAuthReplaceCalledStationIDWithZone, wlanAuthRadiusAcctAfterMacBaseAuthorization,
wlanAuthRadiusTimeoutRole, wlanAuthRadiusOperatorNameSpace, wlanAuthRadiusOperatorName, wlanAuthMACBasedAuthReAuthOnAreaRoam, wlanRadiusName,
wlanRadiusUsage, wlanRadiusPriority, wlanRadiusPort, wlanRadiusRetries, wlanRadiusTimeout,
wlanRadiusNASUseVnsIP, wlanRadiusNASIP, wlanRadiusNASIDUseVNSName, wlanRadiusNASID, wlanRadiusAuthType,
wlanCPAuthType, wlanCP802HttpRedirect, wlanCPExtConnection, wlanCPExtPort, wlanCPExtEnableHttps,
wlanCPExtSharedSecret, wlanCPExtTosOverride, wlanCPExtTosValue, wlanCPGuestAccLifetime, wlanCPGuestSessionLifetime,
loadGrpRadiosRadio1, loadGrpRadiosRadio2, loadGrpWlanAssigned,
schedule, startHour, startMinute, duration, recurrenceDaily, recurrenceWeekly, recurrenceMonthly, apPlatforms,
wlanCPIntLogoffButton, wlanCPIntStatusCheckButton,
wlanCPRedirectURL, apRadioProtocol, apRadioNumber, wlanCPReplaceIPwithFQDN, wlanCPSendLoginTo,
wlanCPGuestAllowedLifetimeAcct, wlanCPGuestIDPrefix, wlanCPGuestMinPassLength, wlanCPGuestMaxConcurrentSession,
wlanCPExtAddIPtoURL, wlanCPUseHTTPSforConnection,wlanCPIdentity, wlanCPCustomSpecificURL,
wlanCPSelectionOption,
wlanCPExtEncryption, radiusStrictMode, advancedFilteringMode, weakCipherEnable,
stationEventType, stationMacAddress, stationIPAddress, stationAPName,
stationAPSSID, stationDetailEvent, stationRoamedAPName, stationName,
stationBSSID, stationEventTimeStamp, stationIPv6Address1, stationIPv6Address2, stationIPv6Address3,
clientAutologinOption, radiusMacAddressFormatOption,
wlanRadiusServerName, wlanRadiusServerUse, wlanRadiusServerUsage,
wlanRadiusServerAuthNASIP, wlanRadiusServerAuthNASId, wlanRadiusServerAuthAuthType, wlanRadiusServerAcctNASIP,
wlanRadiusServerAcctNASId,
wlanRadiusServerAcctSIAR, wlanRadiusServerMacNASIP, wlanRadiusServerMacNASId, wlanRadiusServerMacAuthType,
wlanRadiusServerMacPW, wlanRadiusServerAuthUseVNSIPAddr, wlanRadiusServerAuthUseVNSName,
wlanRadiusServerAcctUseVNSIPAddr, wlanRadiusServerAcctUseVNSName,
wlanRadiusServerMacUseVNSIPAddr, wlanRadiusServerMacUseVNSName
}
STATUS current
DESCRIPTION
"Conformance groups."
::= { hiPathWirelessHWCConformance 2 }
-- 1.3.6.1.4.1.4329.15.3.30.3
hiPathWirelessHWCAlarms NOTIFICATION-GROUP
NOTIFICATIONS { hiPathWirelessLogAlarm, stationEventAlarm, apTunnelAlarm }
STATUS current
DESCRIPTION
"Conformance information for the alarm groups."
::= { hiPathWirelessHWCConformance 3 }
-- 1.3.6.1.4.1.4329.15.3.30.4
hiPathWirelessHWCObsolete OBJECT-GROUP
OBJECTS { vnsWDSRFAPName, vnsWDSRFbgService, vnsWDSRFaService, vnsWDSRFPreferredParent, vnsWDSRFBackupParent,
vnsWDSRFBridge, vnsRateControlProfInd, vnsRateControlProfName, vnsRateControlCIR, vnsRateControlCBS,
vnsExceptionFiterName, vnsExceptionStatPktsDenied, vnsExceptionStatPktsAllowed, vnsWDSStatAPName, vnsWDSStatAPRole,
vnsWDSStatAPRadio, vnsWDSStatAPParent, vnsWDSStatSSID, vnsWDSStatRxFrame, vnsWDSStatTxFrame,
vnsWDSStatRxError, vnsWDSStatTxError, vnsWDSStatRxRSSI, vnsWDSStatRxRate, vnsAssignmentMode,
vnsParentIfIndex, externalRadiusServerName, externalRadiusServerAddress, externalRadiusServerSharedSecret, externalRadiusServerRowStatus,
cpLoginLabel, cpPasswordLabel, cpHeaderURL, cpFooterURL, cpMessage,
cpURL, loadGroupLoadControl, vnsWDSStatTxRate, vnsRateControlProfile, vnsStatName,
vnsStatTxPkts, vnsStatRxPkts, vnsStatTxOctects, vnsStatRxOctects, vnsStatMulticastTxPkts,
vnsStatMulticastRxPkts, vnsStatBroadcastTxPkts, vnsStatBroadcastRxPkts, vnsStatRadiusTotRequests, vnsStatRadiusReqFailed,
vnsStatRadiusReqRejected }
STATUS obsolete
DESCRIPTION
"List of object that EWC does not anymore support."
::= { hiPathWirelessHWCConformance 4 }
-- 1.3.6.1.4.1.4329.15.3.30.5
wirelessEWCGroups OBJECT IDENTIFIER ::= { hiPathWirelessHWCConformance 5 }
-- 1.3.6.1.4.1.4329.15.3.30.5.1
physicalPortsGroup OBJECT-GROUP
OBJECTS { portMgmtTrafficEnable, portDuplexMode, portFunction, portName, portIpAddress,
portMask, portVlanID, portDHCPEnable, portDHCPGateway, portDHCPDomain,
portDHCPDefaultLease, portDHCPMaxLease, portDHCPDnsServers, portDHCPWins, portEnabled,
portMacAddress }
STATUS deprecated
DESCRIPTION
"Physical ports and their attributes. "
::= { wirelessEWCGroups 1 }
-- 1.3.6.1.4.1.4329.15.3.30.5.2
phyDHCPRangeGroup OBJECT-GROUP
OBJECTS { phyDHCPRangeIndex, phyDHCPRangeStart, phyDHCPRangeEnd, phyDHCPRangeType, phyDHCPRangeStatus
}
STATUS deprecated
DESCRIPTION
"DHCP objects and attributes associated to physical ports. "
::= { wirelessEWCGroups 2 }
-- 1.3.6.1.4.1.4329.15.3.30.5.3
layerTwoPortGroup OBJECT-GROUP
OBJECTS { layerTwoPortName, layerTwoPortMacAddress, layerTwoPortMgmtState }
STATUS current
DESCRIPTION
"Collection of layer two ports objects."
::= { wirelessEWCGroups 3 }
-- 1.3.6.1.4.1.4329.15.3.30.5.4
muGroup OBJECT-GROUP
OBJECTS { muMACAddress, muIPAddress, muUser, muState, muAPSerialNo,
muVnsSSID, muTxPackets, muRxPackets, muTxOctets, muRxOctets,
muDuration, muAPName, muWLANID, muConnectionProtocol, muTopologyName,
muPolicyName, muDefaultCoS, muConnectionCapability, muBSSIDMac, muDot11ConnectionCapability }
STATUS current
DESCRIPTION
"MU attributes associated to EWC."
::= { wirelessEWCGroups 4 }
-- 1.3.6.1.4.1.4329.15.3.30.5.5
apStatsGroup OBJECT-GROUP
OBJECTS { apInUcastPkts, apInNUcastPkts, apInOctets, apInErrors, apInDiscards,
apOutUcastPkts, apOutNUcastPkts, apOutOctets, apOutErrors, apOutDiscards,
apUpTime, apCredentialType, apCertificateExpiry, apStatsMuCounts,
apStatsSessionDuration,
apTotalStationsA, apTotalStationsB, apTotalStationsG, apTotalStationsN50, apTotalStationsN24,
apInvalidPolicyCount, apInterfaceMTU, apEffectiveTunnelMTU, apTotalStationsAC,
apTotalStationsAInOctets, apTotalStationsAOutOctets, apTotalStationsBInOctets,
apTotalStationsBOutOctets, apTotalStationsGInOctets, apTotalStationsGOutOctets,
apTotalStationsN50InOctets, apTotalStationsN50OutOctets, apTotalStationsN24InOctets,
apTotalStationsN24OutOctets, apTotalStationsACInOctets, apTotalStationsACOutOctets,
apRadioStatusChannel, apRadioStatusChannelWidth, apRadioStatusChannelOffset,
apPerfRadioPrevPeakChannelUtilization, apPerfRadioCurPeakChannelUtilization,
apPerfRadioAverageChannelUtilization, apPerfRadioCurrentChannelUtilization,
apPerfRadioPrevPeakRSS, apPerfRadioCurPeakRSS, apPerfRadioAverageRSS,
apPerfRadioCurrentRSS, apPerfRadioPrevPeakSNR, apPerfRadioCurPeakSNR,
apPerfRadioAverageSNR, apPerfRadioCurrentSNR,
apPerfRadioPrevPeakPktRetx, apPerfRadioCurPeakPktRetx, apPerfRadioAveragePktRetx,
apPerfRadioCurrentPktRetx, apPerfRadioPktRetx, apAccPrevPeakAssocReqRx,
apAccCurPeakAssocReqRx, apAccAverageAssocReqRx,
apAccCurrentAssocReqRx, apAccAssocReqRx, apAccPrevPeakReassocReqRx,
apAccCurPeakReassocReqRx, apAccAverageReassocReqRx,
apAccCurrentReassocReqRx, apAccReassocReqRx, apAccPrevPeakDisassocDeauthReqTx,
apAccCurPeakDisassocDeauthReqTx, apAccAverageDisassocDeauthReqTx,
apAccCurrentDisassocDeauthReqTx, apAccDisassocDeauthReqTx,
apAccPrevPeakDisassocDeauthReqRx, apAccCurPeakDisassocDeauthReqRx,
apAccAverageDisassocDeauthReqRx, apAccCurrentDisassocDeauthReqRx,
apAccDisassocDeauthReqRx, apPerfWlanPrevPeakClientsPerSec,
apPerfWlanCurPeakClientsPerSec, apPerfWlanAverageClientsPerSec,
apPerfWlanCurrentClientsPerSec, apPerfWlanPrevPeakULOctetsPerSec,
apPerfWlanCurPeakULOctetsPerSec, apPerfWlanAverageULOctetsPerSec,
apPerfWlanCurrentULOctetsPerSec, apPerfWlanULOctets,
apPerfWlanPrevPeakULPktsPerSec, apPerfWlanCurPeakULPktsPerSec,
apPerfWlanAverageULPktsPerSec, apPerfWlanCurrentULPktsPerSec,
apPerfWlanULPkts, apPerfWlanPrevPeakDLOctetsPerSec, apPerfWlanCurPeakDLOctetsPerSec,
apPerfWlanAverageDLOctetsPerSec, apPerfWlanCurrentDLOctetsPerSec, apPerfWlanDLOctets,
apPerfWlanPrevPeakDLPktsPerSec, apPerfWlanCurPeakDLPktsPerSec,
apPerfWlanAverageDLPktsPerSec, apPerfWlanCurrentDLPktsPerSec,
apPerfWlanDLPkts, apChnlUtilPrevPeakUtilization,
apChnlUtilCurPeakUtilization, apChnlUtilAverageUtilization, apChnlUtilCurrentUtilization,
nearbyApInfo, nearbyApBSSID, nearbyApChannel, nearbyApRSS
}
STATUS current
DESCRIPTION
"Collection of objects and attributes related to AP statistics."
::= { wirelessEWCGroups 5 }
-- 1.3.6.1.4.1.4329.15.3.30.5.6
muACLGroup OBJECT-GROUP
OBJECTS { muACLRowStatus, muACLMACAddress, muACLType }
STATUS current
DESCRIPTION
"List of objects for creation of blacklist/whitelist."
::= { wirelessEWCGroups 6 }
-- 1.3.6.1.4.1.4329.15.3.30.5.7
siteGroup OBJECT-GROUP
OBJECTS { siteID, siteName, siteLocalRadiusAuthentication, siteDefaultDNSServer, siteMaxEntries,
siteNumEntries, siteTableNextAvailableIndex, siteEnableSecureTunnel, siteReplaceStnIDwithSiteName, siteRowStatus,
siteEncryptCommAPtoController, siteEncryptCommBetweenAPs, siteBandPreferenceEnable, siteLoadControlEnableR1, siteLoadControlEnableR2,
siteMaxClientR1, siteMaxClientR2, siteStrictLimitEnableR1, siteStrictLimitEnableR2 }
STATUS current
DESCRIPTION
"A collection of objects providing Site creation and its attributes."
::= { wirelessEWCGroups 7 }
-- 1.3.6.1.4.1.4329.15.3.30.5.8
sitePolicyGroup OBJECT-GROUP
OBJECTS { sitePolicyMember }
STATUS current
DESCRIPTION
"Objects defining the association of policies to sites."
::= { wirelessEWCGroups 8 }
-- 1.3.6.1.4.1.4329.15.3.30.5.9
siteCosGroup OBJECT-GROUP
OBJECTS { siteCoSMember }
STATUS current
DESCRIPTION
"Objects defining the association of policies to sites."
::= { wirelessEWCGroups 9 }
-- 1.3.6.1.4.1.4329.15.3.30.5.10
siteAPGroup OBJECT-GROUP
OBJECTS { siteAPMember }
STATUS current
DESCRIPTION
"Objects defining the association of policies to sites."
::= { wirelessEWCGroups 10 }
-- 1.3.6.1.4.1.4329.15.3.30.5.11
siteWlanGroup OBJECT-GROUP
OBJECTS { siteWlanApRadioAssigned }
STATUS current
DESCRIPTION
"Objects defining the association of policies to sites."
::= { wirelessEWCGroups 11 }
-- 1.3.6.1.4.1.4329.15.3.30.5.12
apGroup OBJECT-GROUP
OBJECTS { apIndex, apName, apDesc, apSerialNumber, apPortifIndex,
apWiredIfIndex, apSoftwareVersion, apSpecific, apBroadcastDisassociate, apRowStatus,
apVlanID, apIpAssignmentType, apIfMAC, apHwVersion, apSwVersion,
apEnvironment, apHome, apRole, apState, apStatus,
apPollTimeout, apPollInterval, apTelnetAccess, apMaintainClientSession, apRestartServiceContAbsent,
apHostname, apLocation, apStaticMTUsize, apSiteID, apZone,
apLLDP, apLEDMode, apLocationbasedService, apSecureTunnel,
apEncryptCntTraffic, apIpAddress, apMICErrorWarning, apIPAddress, apSecureDataTunnelType,
apIPMulticastAssembly, apSSHConnection}
STATUS current
DESCRIPTION
"List of objects defining configuration attributes of an AP."
::= { wirelessEWCGroups 12 }
-- 1.3.6.1.4.1.4329.15.3.30.5.13
wlanGroup OBJECT-GROUP
OBJECTS { wlanID, wlanRowStatus, wlanServiceType, wlanName, wlanSSID,
wlanSynchronize, wlanEnabled, wlanDefaultTopologyID, wlanSessionTimeout, wlanIdleTimeoutPreAuth,
wlanIdleSessionPostAuth, wlanSupressSSID, wlanDot11hSupport, wlanDot11hClientPowerReduction, wlanProcessClientIE,
wlanEngerySaveMode, wlanBlockMuToMuTraffic, wlanRemoteable, wlanVNSID, wlanMaxEntries,
wlanRadioManagement11k, wlanBeaconReport, wlanQuietIE, wlanMirrorN, wlanNetFlow, wlanAppVisibility,
wlanNumEntries, wlanTableNextAvailableIndex }
STATUS current
DESCRIPTION
"List of objects defining configuration attributes of a WLAN."
::= { wirelessEWCGroups 13 }
-- 1.3.6.1.4.1.4329.15.3.30.5.14
wlanStatsGroup OBJECT-GROUP
OBJECTS { wlanStatsAssociatedClients, wlanStatsRadiusTotRequests, wlanStatsRadiusReqFailed, wlanStatsRadiusReqRejected, wlanStatsID
}
STATUS current
DESCRIPTION
"List of objects defining configuration attributes of a WLAN."
::= { wirelessEWCGroups 14 }
-- 1.3.6.1.4.1.4329.15.3.30.5.15
topologyGroup OBJECT-GROUP
OBJECTS { topologyName, topologyMode, topologyTagged, topologyVlanID, topologyEgressPort,
topologyLayer3, topologyIPAddress, topologyIPMask, topologyMTUsize, topologyGateway,
topologyDHCPUsage, topologyAPRegistration, topologyManagementTraffic, topologySynchronize, topologySyncGateway,
topologySyncMask, topologySyncIPStart, topologySyncIPEnd, topologyStaticIPv6Address, topologyLinkLocalIPv6Address,
topologyPreFixLength, topologyIPv6Gateway, topologyDynamicEgress , topologyIsGroup, topologyGroupMembers,
topologyMemberId}
STATUS current
DESCRIPTION
"List of objects defining configuration attributes of a WLAN."
::= { wirelessEWCGroups 15 }
-- 1.3.6.1.4.1.4329.15.3.30.5.16
topologyStatGroup OBJECT-GROUP
OBJECTS { topologyName, topoStatName, topoStatTxPkts, topoStatRxPkts, topoStatTxOctets,
topoStatRxOctets, topoStatMulticastTxPkts, topoStatMulticastRxPkts, topoStatBroadcastTxPkts, topoStatBroadcastRxPkts,
topoStatFrameChkSeqErrors, topoStatFrameTooLongErrors,
topoWireStatName, topoWireStatTxPkts, topoWireStatRxPkts, topoWireStatTxOctets,
topoWireStatRxOctets, topoWireStatMulticastTxPkts, topoWireStatMulticastRxPkts,
topoWireStatBroadcastTxPkts, topoWireStatBroadcastRxPkts,
topoWireStatFrameChkSeqErrors, topoWireStatFrameTooLongErrors,
topoCompleteStatName, topoCompleteStatTxPkts,topoCompleteStatRxPkts, topoCompleteStatTxOctets,
topoCompleteStatRxOctets, topoCompleteStatMulticastTxPkts, topoCompleteStatMulticastRxPkts,
topoCompleteStatBroadcastTxPkts, topoCompleteStatBroadcastRxPkts, topoCompleteStatFrameChkSeqErrors,
topoCompleteStatFrameTooLongErrors
}
STATUS current
DESCRIPTION
"List of objects for defining topology statics. "
::= { wirelessEWCGroups 16 }
-- 1.3.6.1.4.1.4329.15.3.30.5.17
loadGroup OBJECT-GROUP
OBJECTS { loadGroupID, loadGroupName, loadGroupType, loadGroupBandPreference, loadGroupClientCountRadio1,
loadGroupClientCountRadio2, loadGroupLoadControlEnableR1, loadGroupLoadControlEnableR2, loadGroupLoadControlStrictLimitR1, loadGroupLoadControlStrictLimitR2
}
STATUS current
DESCRIPTION
"A collection of objects providing Load Group creation and its attributes."
::= { wirelessEWCGroups 17 }
-- 1.3.6.1.4.1.4329.15.3.30.5.18
widsWipsObjectsGroup OBJECT-GROUP
OBJECTS { mitigatorAnalysisEngine, activeThreatsCounts, uncategorizedAPCounts, friendlyAPCounts, scanGroupMaxEntries,
scanGroupsCurrentEntries }
STATUS current
DESCRIPTION
"Objects defining the state of WIDS-WIPS for the controller."
::= { wirelessEWCGroups 18 }
-- 1.3.6.1.4.1.4329.15.3.30.5.19
widsWipsEngineGroup OBJECT-GROUP
OBJECTS { widsWipsEngineRowStatus, widsWipsEngineControllerIPAddress, widsWipsEnginePollInterval, widsWipsEnginePollRetry }
STATUS current
DESCRIPTION
"Set of objects defining attributes of a WIDS-WIPS engine."
::= { wirelessEWCGroups 19 }
-- 1.3.6.1.4.1.4329.15.3.30.5.20
outOfServiceScanGroup OBJECT-GROUP
OBJECTS { outOfSrvScanGrpName, outOfSrvScanGrpRadio, outOfSrvScanGrpChannelList, outOfSrvScanGrpScanType, outOfSrvScanGrpChannelDwellTime,
outOfSrvScanGrpScanTimeInterval, outOfSrvScanGrpSecurityScan, outOfSrvScanGrpScanActivity, outOfSrvScanGrpScanRowStatus }
STATUS current
DESCRIPTION
"List of objects for defining out-of-service scan group."
::= { wirelessEWCGroups 20 }
-- 1.3.6.1.4.1.4329.15.3.30.5.21
inServiceScanGroup OBJECT-GROUP
OBJECTS { inSrvScanGrpName, inSrvScanGrpMaxConcurrentAttacksPerAP, inSrvScanGrpCounterMeasuresType, inSrvScanGrpScan2400MHzSelection, inSrvScanGrpScan5GHzSelection,
inSrvScanGrpRowStatus, inSrvScanGrpSecurityThreats, inSrvScanGrpblockAdHocClientsPeriod, inSrvScanGrpClassifySourceIF,
inSrvScanGrpDetectRogueAP, inSrvScanGrpListeningPort}
STATUS current
DESCRIPTION
"List of objects for defining in-service scan group."
::= { wirelessEWCGroups 21 }
-- 1.3.6.1.4.1.4329.15.3.30.5.22
scanGroupAPAssignmentGroup OBJECT-GROUP
OBJECTS { scanGroupAPAssignApSerial, scanGroupAPAssignName, scanGroupAPAssignRadio1, scanGroupAPAssignRadio2, scanGroupAPAssignInactiveAP,
scanGroupAPAssignAllowScanning, scanGroupAPAssignGroupName, scanGroupAPAssignAllowSpectrumAnalysis, scanGroupAPAssignControllerIPAddress,
scanGroupAPAssignFordwardingService
}
STATUS current
DESCRIPTION
"List of objects for assignment of AP to scan group."
::= { wirelessEWCGroups 22 }
-- 1.3.6.1.4.1.4329.15.3.30.5.23
scanAPGroup OBJECT-GROUP
OBJECTS { scanAPSerialNumber, scanAPControllerIPAddress, scanAPRowStatus, scanAPAcessPointName,scanAPProfileName, scanAPProfileType }
STATUS current
DESCRIPTION
"List of objects for defining AP scan groups in EWC."
::= { wirelessEWCGroups 23 }
-- 1.3.6.1.4.1.4329.15.3.30.5.24
friendlyAPGroup OBJECT-GROUP
OBJECTS { friendlyAPMacAddress, friendlyAPSSID, friendlyAPDescription, friendlyAPManufacturer }
STATUS current
DESCRIPTION
"List of objects defining friendly APs identified during scanning time."
::= { wirelessEWCGroups 24 }
-- 1.3.6.1.4.1.4329.15.3.30.5.25
wlanSecurityReportGroup OBJECT-GROUP
OBJECTS { wlanSecurityReportFlag, wlanSecurityReportUnsecureType, wlanSecurityReportNotes, wlanUnsecuredWlanCounts }
STATUS current
DESCRIPTION
"Set of objects defining attributes of security group report."
::= { wirelessEWCGroups 25 }
-- 1.3.6.1.4.1.4329.15.3.30.5.26
apAntennaGroup OBJECT-GROUP
OBJECTS { apAntennanName, apAntennaType }
STATUS current
DESCRIPTION
"A collection of objects defining an antenna attributes for an AP."
::= { wirelessEWCGroups 26 }
-- 1.3.6.1.4.1.4329.15.3.30.5.27
muAccessListGroup OBJECT-GROUP
OBJECTS { muAccessListMACAddress, muAccessListBitmaskLength, muAccessListRowStatus }
STATUS current
DESCRIPTION
"List of objects for creation of MU access list to block MU access, case of black
list, or allow access, case of white list to wireless controller resources."
::= { wirelessEWCGroups 27 }
-- 1.3.6.1.4.1.4329.15.3.30.5.28
activeThreatGroup OBJECT-GROUP
OBJECTS { activeThreatCategory, activeThreatDeviceMAC, activeThreatDateTime, activeThreatCounterMeasure, activeThreatAPName,
activeThreatRSS, activeThreatExtraDetails, activeThreatThreat }
STATUS current
DESCRIPTION
"List of objects defining a discovered security threat."
::= { wirelessEWCGroups 28 }
-- 1.3.6.1.4.1.4329.15.3.30.5.29
countermeasureAPGroup OBJECT-GROUP
OBJECTS { countermeasureAPName, countermeasureAPThreatCategory, countermeasureAPCountermeasure, countermeasureAPTime, countermeasureAPSerial
}
STATUS current
DESCRIPTION
"List of objects defining APs taking part in countermeasure activities to
thwart incoming threats."
::= { wirelessEWCGroups 29 }
-- 1.3.6.1.4.1.4329.15.3.30.5.30
blaclistedClientGroup OBJECT-GROUP
OBJECTS { blacklistedClientMAC, blacklistedClientStatTime, blacklistedClientEndTime, blacklistedClientReason }
STATUS current
DESCRIPTION
"List of objects identifying blacklisted clients."
::= { wirelessEWCGroups 30 }
-- 1.3.6.1.4.1.4329.15.3.30.5.31
threatSummaryGroup OBJECT-GROUP
OBJECTS { threatSummaryCategory, threatSummaryActiveThreat, threatSummaryHistoricalCounts }
STATUS current
DESCRIPTION
"List of objects defining attributes of known discovered threat."
::= { wirelessEWCGroups 31 }
-- 1.3.6.1.4.1.4329.15.3.30.5.32
licensingInformationGroup OBJECT-GROUP
OBJECTS { licenseRegulatoryDomain, licenseType, licenseDaysRemaining, licenseAvailableAP, licenseInServiceRadarAP,
licenseMode, licenseLocalAP, licenseForeignAP, licenseLocalRadarAP, licenseForeignRadarAP
}
STATUS current
DESCRIPTION
"List of objects providing licensing information for the controller system."
::= { wirelessEWCGroups 32 }
-- 1.3.6.1.4.1.4329.15.3.30.5.33
stationsByProtocolGroup OBJECT-GROUP
OBJECTS { stationsByProtocolA, stationsByProtocolB, stationsByProtocolG, stationsByProtocolN24, stationsByProtocolN5,
stationsByProtocolUnavailable, stationsByProtocolError, stationsByProtocolAC
}
STATUS current
DESCRIPTION
"List of objects for aggregated MUs on a specific wireless channel."
::= { wirelessEWCGroups 33 }
-- 1.3.6.1.4.1.4329.15.3.30.5.34
apByChannelGroup OBJECT-GROUP
OBJECTS { apByChannelAPs }
STATUS current
DESCRIPTION
"List of objects for aggregated access points on a wireless channel."
::= { wirelessEWCGroups 34 }
-- 1.3.6.1.4.1.4329.15.3.30.5.35
uncategorizedAPGroup OBJECT-GROUP
OBJECTS { uncategorizedAPDescption, uncategorizedAPManufacturer, uncategorizedAPClassify,uncategorizedAPSSID }
STATUS current
DESCRIPTION
"Objects defining uncategorized access points discovered by Radar application."
::= { wirelessEWCGroups 35 }
-- 1.3.6.1.4.1.4329.15.3.30.5.36
authorizedAPGroup OBJECT-GROUP
OBJECTS { authorizedAPDescription, authorizedAPManufacturer, authorizedAPClassify, authorizedAPRowStatus }
STATUS current
DESCRIPTION
"Objects defining authorized access points discovered by Radar application."
::= { wirelessEWCGroups 36 }
-- 1.3.6.1.4.1.4329.15.3.30.5.37
prohibitedAPGroup OBJECT-GROUP
OBJECTS { prohibitedAPCategory, prohibitedAPDescription, prohibitedAPManufacturer, prohibitedAPClassify, prohibitedAPRowStatus
}
STATUS current
DESCRIPTION
"Objects defining prohibited access points discovered by Radar application."
::= { wirelessEWCGroups 37 }
-- 1.3.6.1.4.1.4329.15.3.30.5.38
dedicatedScanGroup OBJECT-GROUP
OBJECTS { dedicatedScanGrpName, dedicatedScanGrpMaxConcurrentAttacksPerAP,
dedicatedScanGrpCounterMeasures, dedicatedScanGrpScan2400MHzFreq,
dedicatedScanGrpScan5GHzFreq, dedicatedScanGrpRowStatus,
dedicatedScanGrpSecurityThreats,dedicatedScanGrpBlockAdHocPeriod,
dedicatedScanGrpClassifySourceIF,
dedicatedScanGrpDetectRogueAP, dedicatedScanGrpListeningPort
}
STATUS current
DESCRIPTION
"List of objects for defining dedicated scan group."
::= { wirelessEWCGroups 38 }
-- 1.3.6.1.4.1.4329.15.3.30.5.39
apRadioAntennaGroup OBJECT-GROUP
OBJECTS { apRadioAntennaType , apRadioAntennaModel, apRadioAttenuation}
STATUS current
DESCRIPTION
"A collection of objects defining an antenna attributes for an AP."
::= { wirelessEWCGroups 39 }
-- 1.3.6.1.4.1.4329.15.3.30.5.40
radiusFastFailoverEventsGroup OBJECT-GROUP
OBJECTS { fastFailoverEvents }
STATUS current
DESCRIPTION
"List of objects for defining radius FastFailoverEvents."
::= { wirelessEWCGroups 40 }
-- 1.3.6.1.4.1.4329.15.3.30.5.41
dhcpRelayListenersGroup OBJECT-GROUP
OBJECTS { dhcpRelayListenersRowStatus, destinationName,destinationIP,dhcpRelayListenersMaxEntries,
dhcpRelayListenersNextIndex,dhcpRelayListenersNumEntries
}
STATUS current
DESCRIPTION
"List of objects for defining dhcpRelayListeners."
::= { wirelessEWCGroups 41 }
-- 1.3.6.1.4.1.4329.15.3.30.5.42
authenticationAdvancedGroup OBJECT-GROUP
OBJECTS { includeServiceType , clientMessageDelayTime ,radiusAccounting ,serverUsageModel,
radacctStartOnIPAddr, clientServiceTypeLogin, applyMacAddressFormat
}
STATUS current
DESCRIPTION
"List of objects for defining authenticationAdvanced."
::= { wirelessEWCGroups 42 }
-- 1.3.6.1.4.1.4329.15.3.30.5.43
radiusExtnsSettingGroup OBJECT-GROUP
OBJECTS {pollingMechanism, serverPollingInterval }
STATUS current
DESCRIPTION
"List of objects for defining radiusExtnsSetting."
::= { wirelessEWCGroups 43 }
END