mibs/MIBS/exalt/ExtendAirG2

129 lines
4.6 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
ExtendAirG2 DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32
FROM SNMPv2-SMI
RadioSourceT, BandwidthT, ModulationT,
RadioTxPwr11gT, BuzTimeoutT, DiplexerConfigG2T, ExaltEnableT,
AcmBaseModulationT, AcmTargetModulationT, AcmPolicyT, AcmPowerBoostEnableT
FROM ExaltComm
OBJECT-GROUP
FROM SNMPv2-CONF
systemConfig
FROM ExaltComProducts
DisplayString
FROM SNMPv2-TC;
extendAirG2 MODULE-IDENTITY
LAST-UPDATED "201304261021Z"
ORGANIZATION "Exalt"
CONTACT-INFO "Exalt Wireless Inc.
250 E Hacienda Ave.,
Campbell, CA, 95008
USA"
DESCRIPTION "This is the Device Specific configuration for
the ExtendAirG2 Licensed radio."
REVISION "201304261021Z"
DESCRIPTION "This is rev. 1.00"
::= { systemConfig 57 }
extendAirG2TxPower OBJECT-TYPE
SYNTAX RadioTxPwr11gT
UNITS "Tenths of dBm."
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Transmit Power level multiplied by 10.0 -<g45><s11>"
::= { extendAirG2 1 }
extendAirG2Bandwidth OBJECT-TYPE
SYNTAX BandwidthT
UNITS "kHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The RF bandwidth. -<g47><s12 *1>"
::= { extendAirG2 2 }
extendAirG2Modulation OBJECT-TYPE
SYNTAX ModulationT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Mode. -<g52><s14 *1>"
::= { extendAirG2 3 }
extendAirG2TXfrequency OBJECT-TYPE
SYNTAX DisplayString (SIZE(2..9))
UNITS "MHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The TX Frequency/ -<g46 TX><s15 TX>."
::= { extendAirG2 4 }
extendAirG2RXfrequency OBJECT-TYPE
SYNTAX DisplayString (SIZE(2..9))
UNITS "MHz"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The RX Frequency/ -<g46 RX><s15 RX>."
::= { extendAirG2 5 }
extendAirG2DiplexerConfiguration OBJECT-TYPE
SYNTAX DiplexerConfigG2T
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The diplexer (label 701-802) configuration/ -<g310><s197>."
::= { extendAirG2 6 }
extendAirG2InsertionLoss OBJECT-TYPE
SYNTAX Integer32 (0..200)
UNITS "Hundredth dBm"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Inserion Loss is applicable for 'OTHER' diplexer entities only/ -<g528><s28 * 100>."
::= { extendAirG2 7 }
extendAirG2BuzTimeout OBJECT-TYPE
SYNTAX BuzTimeoutT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This sets buzzer timeout period. User Options are: buzzer off,
10 minutes or 2 hours."
::= { extendAirG2 8 }
extendAirG2AcmMode OBJECT-TYPE
SYNTAX ExaltEnableT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "ACM Mode enable/disable."
::= { extendAirG2 9 }
extendAirG2AcmPolicy OBJECT-TYPE
SYNTAX AcmPolicyT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ACM Policy (Conservative/agressive)."
::= { extendAirG2 10 }
extendAirG2AcmBaseModulation OBJECT-TYPE
SYNTAX AcmBaseModulationT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ACM Base Mode."
::= { extendAirG2 11 }
extendAirG2AcmTargetModulation OBJECT-TYPE
SYNTAX AcmTargetModulationT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ACM Target Mode."
::= { extendAirG2 12 }
extendAirG2AcmPowerBoostMode OBJECT-TYPE
SYNTAX AcmPowerBoostEnableT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The ACM Power Boost Mode."
::= { extendAirG2 15 }
END