mibs/MIBS/extreme/EXTREME-STACKING-MIB

408 lines
14 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- ################################################################################
EXTREME-STACKING-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY FROM SNMPv2-SMI
OBJECT-TYPE FROM SNMPv2-SMI
NOTIFICATION-TYPE FROM SNMPv2-SMI
Unsigned32 FROM SNMPv2-SMI
IpAddress FROM SNMPv2-SMI
MacAddress, DateAndTime FROM SNMPv2-TC
sysUpTime, sysDescr, ifIndex, DisplayString FROM RFC1213-MIB
TruthValue FROM SNMPv2-TC
extremeAgent FROM EXTREME-BASE-MIB
extremeCurrentTemperature FROM EXTREME-SYSTEM-MIB;
extremeStackable MODULE-IDENTITY
LAST-UPDATED "201712061500Z"
ORGANIZATION "Extreme Networks, Inc."
CONTACT-INFO "www.extremenetworks.com"
DESCRIPTION "Extreme Stackable MIB objects"
REVISION "201712061500Z" -- Tue Dec 6 15:00 UTC 2017
DESCRIPTION "Change extremeStackingPortLinkSpeed description."
REVISION "201710101515Z" -- Tue Oct 10 15:15 UTC 2017
DESCRIPTION "Change extremeStackDetecton from read-write to read-only."
REVISION "201410131030Z" -- Mon Oct 13 10:30 UTC 2014
DESCRIPTION "Added table objects for current image booted and
switch boot time."
REVISION "200409270915Z" -- Mon Sept 27 09:15 UTC 2004
DESCRIPTION "Initial version."
::= { extremeAgent 33 }
--
-- Stack Detection Scalar
--
extremeStackDetection OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field provides the information as to whether the stacking
is enabled (True) or disabled (False) for the system. The stacking
feature is supported from extremeware version 7.4 and above"
::= { extremeStackable 1 }
--
-- StackMember Table
--
extremeStackMemberTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExtremeStackMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about each stack member that are
a part of this stacking. If extremeStackDetection is not enabled,
we wouldnt not have any rows for this table."
::= { extremeStackable 2 }
extremeStackMemberEntry OBJECT-TYPE
SYNTAX ExtremeStackMemberEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table for a StackMember Entity"
INDEX { extremeStackMemberSlotId }
::= { extremeStackMemberTable 1 }
ExtremeStackMemberEntry ::= SEQUENCE {
extremeStackMemberSlotId INTEGER,
extremeStackMemberType OBJECT IDENTIFIER,
extremeStackMemberOperStatus INTEGER,
extremeStackMemberRole INTEGER,
extremeStackMemberEntPhysicalIndex INTEGER,
extremeStackMemberMACAddress MacAddress,
extremeStackMemberCurImageVersion DisplayString,
extremeStackMemberPriImageVersion DisplayString,
extremeStackMemberSecImageVersion DisplayString,
extremeStackMemberBootRomVersion DisplayString,
extremeStackMemberCurConfig DisplayString,
extremeStackMemberConfigSelected INTEGER,
extremeStackMemberImageSelected INTEGER,
extremeStackMemberStackPriority INTEGER,
extremeStackMemberMgmtIpAddress IpAddress,
extremeStackMemberSysLocation DisplayString,
extremeStackMemberAutoConfig TruthValue,
extremeStackMemberStackStatus INTEGER,
extremeStackMemberImageBooted INTEGER,
extremeStackMemberBootTime DateAndTime
}
extremeStackMemberSlotId OBJECT-TYPE
SYNTAX INTEGER(1..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The slot id of the stack member in the stack"
::= { extremeStackMemberEntry 1 }
extremeStackMemberType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of device of the stack member. This field reflects
the individual sysOid of the member"
::= { extremeStackMemberEntry 2 }
extremeStackMemberOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down(2),
mismatch (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational status of the stack member. When the stack
comes up, if there is a vector mismatch namely license mismatch or
platform mismatch between the master and the member, the member
remains in the mismatch state. Further communication with the member
is not possible"
::= { extremeStackMemberEntry 3 }
extremeStackMemberRole OBJECT-TYPE
SYNTAX INTEGER {
master (1),
slave (2),
backup (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role of the stack member as to whether it is acting as a
master,backup or a slave"
::= { extremeStackMemberEntry 4 }
extremeStackMemberEntPhysicalIndex OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The entPhysicalIndex of the corresponding device as defined
in the ENTITY-MIB"
::= { extremeStackMemberEntry 5 }
extremeStackMemberMACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mac address of the stack member"
::= { extremeStackMemberEntry 6 }
extremeStackMemberCurImageVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current image version of the stack member"
::= { extremeStackMemberEntry 7 }
extremeStackMemberPriImageVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The primary image version of the stack member"
::= { extremeStackMemberEntry 8 }
extremeStackMemberSecImageVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The secondary image version of the stack member"
::= { extremeStackMemberEntry 9 }
extremeStackMemberBootRomVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The boot rom version of the stack member"
::= { extremeStackMemberEntry 10 }
extremeStackMemberCurConfig OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current configuration of the stack member"
::= { extremeStackMemberEntry 11 }
extremeStackMemberConfigSelected OBJECT-TYPE
SYNTAX INTEGER {
primary (1),
secondary (2),
other (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The config selected to be used on reboot for the stack member"
::= { extremeStackMemberEntry 12 }
extremeStackMemberImageSelected OBJECT-TYPE
SYNTAX INTEGER {
primary (1),
secondary (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The image selected to be used on reboot for the stack member"
::= { extremeStackMemberEntry 13 }
extremeStackMemberStackPriority OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The stack priority of the stack member. The stack priority is
used for the master election algorithm. The member with the highest
priority comes up as the master. If there are more than one switch with
highest priority, the member with the least MAC among them comes up as
the master"
::= { extremeStackMemberEntry 14 }
extremeStackMemberMgmtIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The fallback mgmt ip address which was configured through CLI
for this stack member. This ipaddress can be used to communicate with
this member, if it comes up as the master. The ipaddress is associated
with the vlan configured"
::= { extremeStackMemberEntry 15 }
extremeStackMemberSysLocation OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The physical location of this node (e.g., `telephone
closet, 3rd floor'). If the location is unknown, the value
is the zero-length string."
::= { extremeStackMemberEntry 16 }
extremeStackMemberAutoConfig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This field provides the information whether the config
of the stack member is autogenerated(true) or not(false)"
::= { extremeStackMemberEntry 17 }
extremeStackMemberStackStatus OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This status is used for disabling the stacking feature for
the stack member. If stacking is enabled for the stack member we get
the information as enable, if we mark it as disable, the stack member
is removed from the stack and the corresponding row disappears"
::= { extremeStackMemberEntry 18 }
extremeStackMemberImageBooted OBJECT-TYPE
SYNTAX INTEGER { primary(1), secondary(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The image with which the stack member was last booted, which it is currently running."
::= { extremeStackMemberEntry 19 }
extremeStackMemberBootTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The date and time when the switch was last booted."
::= { extremeStackMemberEntry 20 }
--
-- Stacking Port Table
--
extremeStackingPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF ExtremeStackingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing information about each stacking port
in the stack. If extremeStackDetection is not enabled, we would not
have any rows for this table"
::= { extremeStackable 3 }
extremeStackingPortEntry OBJECT-TYPE
SYNTAX ExtremeStackingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the table for each stacking port in the stack"
INDEX { extremeStackingPortIfIndex }
::= { extremeStackingPortTable 1 }
ExtremeStackingPortEntry ::= SEQUENCE {
extremeStackingPortIfIndex INTEGER,
extremeStackingPortRemoteMac MacAddress,
extremeStackingPortLinkSpeed Unsigned32,
extremeStackingPortLinkStatus INTEGER
}
extremeStackingPortIfIndex OBJECT-TYPE
SYNTAX INTEGER(1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A unique value for each interface. Its value
ranges between 1 and the value of ifNumber. The
value for each interface must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization."
::= { extremeStackingPortEntry 1 }
extremeStackingPortRemoteMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Mac address of the remote system, this stacking port
is connected to. The value of the mac address will be 00:00:00:00:00:00
if the stacking link is not active."
::= { extremeStackingPortEntry 2 }
extremeStackingPortLinkSpeed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Speed of the stacking port link in Gbps."
::= { extremeStackingPortEntry 3 }
extremeStackingPortLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Link status of the stacking port link "
::= { extremeStackingPortEntry 4 }
extremeStackableTraps OBJECT IDENTIFIER
::= { extremeStackable 4 }
extremeStackTrapsPrefix OBJECT IDENTIFIER
::= { extremeStackableTraps 0 }
extremeStackMemberOverheat NOTIFICATION-TYPE
OBJECTS {sysUpTime, sysDescr, extremeCurrentTemperature,
extremeStackMemberSlotId}
STATUS current
DESCRIPTION
"The extremeStackMemberOverheat notification is generated
when the temperature of the stack member reaches the
threshold temperature"
::= { extremeStackTrapsPrefix 1 }
extremeStackMemberStatusChanged NOTIFICATION-TYPE
OBJECTS { extremeStackMemberSlotId, extremeStackMemberOperStatus}
STATUS current
DESCRIPTION
"The extremeStackMemberStatusChanged notification is
generated when the operational status of the stack member
changes"
::= { extremeStackTrapsPrefix 2 }
extremeStackingPortStatusChanged NOTIFICATION-TYPE
OBJECTS { ifIndex, extremeStackingPortRemoteMac,
extremeStackingPortLinkSpeed, extremeStackingPortLinkStatus}
STATUS current
DESCRIPTION
"The extremeStackingPortStatusChanged notification is
generated when the operational status of the stacking port
changes"
::= { extremeStackTrapsPrefix 3 }
END