mibs/MIBS/hp/HP-VLAN-CAR-MIB

257 lines
6.3 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- Foundry Commited Access Rate MIB file.
-- *****************************************************************
HP-VLAN-CAR-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE,
Gauge
FROM RFC1155-SMI
Counter64
FROM SNMPv2-SMI
PacketSource, RateLimitType, RateLimitAction
FROM HP-CAR-MIB
snVLanCAR
FROM HP-SN-SWITCH-GROUP-MIB;
snVLanCARs OBJECT IDENTIFIER ::= { snVLanCAR 1 }
snVLanCARTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnVLanCAREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of rate limit configuration entries for a vlan.
Rate Limit is a method of traffic control. It allows a set
of rate limits to be configured and applied to packets flowing
into/out of an interface to regulate network traffic."
::= { snVLanCARs 1 }
snVLanCAREntry OBJECT-TYPE
SYNTAX SnVLanCAREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A collection of rate-limit configuration objects on this
vlan."
INDEX { snVLanCARVLanId, snVLanCARDirection, snVLanCARRowIndex }
::= { snVLanCARTable 1 }
SnVLanCAREntry ::=
SEQUENCE {
snVLanCARDirection
PacketSource,
snVLanCARVLanId
INTEGER,
snVLanCARRowIndex
INTEGER,
snVLanCARType
RateLimitType,
snVLanCARAccIdx
INTEGER,
snVLanCARRate
INTEGER,
snVLanCARLimit
INTEGER,
snVLanCARExtLimit
INTEGER,
snVLanCARConformAction
RateLimitAction,
snVLanCARExceedAction
RateLimitAction,
snVLanCARStatSwitchedPkts
Counter64,
snVLanCARStatSwitchedBytes
Counter64,
snVLanCARStatFilteredPkts
Counter64,
snVLanCARStatFilteredBytes
Counter64,
snVLanCARStatCurBurst
Gauge
}
--need to refer to the vlan table
--index once it is changed to single
--vlan id as the row index
snVLanCARVLanId OBJECT-TYPE
SYNTAX INTEGER (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VLAN ID as one of the indices of this table .
Each VLAN ID can have a membership of multiple
ports."
::= { snVLanCAREntry 1 }
snVLanCARDirection OBJECT-TYPE
SYNTAX PacketSource
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The input or output transmission direction for the
Rate Limit object."
::= { snVLanCAREntry 2 }
snVLanCARRowIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The table index for rate limit objects.
It increases as the rate limit entries are added.
Skips the number when a row is deleted."
::= { snVLanCAREntry 3 }
snVLanCARType OBJECT-TYPE
SYNTAX RateLimitType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of traffic rate-limited against."
::= { snVLanCAREntry 4 }
snVLanCARAccIdx OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index to the access list if RateLimitType is either
quickAcc or standardAcc."
::= { snVLanCAREntry 5 }
snVLanCARRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The comitted access rate. This determines the long term
average transmission rate. Traffic that falls under this
rate always conforms. This is average rate in bits per
second."
::= { snVLanCAREntry 6 }
snVLanCARLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the normal burst size that determines how large traffic
bursts can be before some traffic exceeds the rate limit. This
specifies the number of bytes that are guaranteed to be transported
by the network at the average rate under normal conditions during
committed time interval. This normal burst size is in bytes."
::= { snVLanCAREntry 7 }
snVLanCARExtLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the extended burst limit that determines how large traffic
bursts can be before all the traffic exceeds the rate limit. This
burst size is in bytes. "
::= { snVLanCAREntry 8 }
snVLanCARConformAction OBJECT-TYPE
SYNTAX RateLimitAction
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Action to be taken when the traffic is within
the Rate Limit.
drop drop the packet.
xmit transmit the packet.
continue continue to evaluate to the subsequent
rate limits.
precedXmit rewrite the IP precedence and transmit
the packet.
precedCont rewrite the IP precedence and allow it
evaluated by subsequent rate limits."
::= { snVLanCAREntry 9 }
snVLanCARExceedAction OBJECT-TYPE
SYNTAX RateLimitAction
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Action to be taken when the traffic exceeds
the Rate Limit.
drop drop the packet.
xmit transmit the packet.
continue continue to evaluate to the subsequent
rate limits.
precedXmit rewrite the IP precedence and transmit
the packet.
precedCont rewrite the IP precedence and allow it
evaluated by subsequent rate limits."
::= { snVLanCAREntry 10 }
snVLanCARStatSwitchedPkts OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of packets permitted by this rate limit."
::= { snVLanCAREntry 11 }
snVLanCARStatSwitchedBytes OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of bytes permitted by this interface."
::= { snVLanCAREntry 12 }
snVLanCARStatFilteredPkts OBJECT-TYPE
SYNTAX Counter64
--UNITS "packets"
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of packets which exceeded this rate limit."
::= { snVLanCAREntry 13 }
snVLanCARStatFilteredBytes OBJECT-TYPE
SYNTAX Counter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The counter of bytes which exceeded this rate limit."
::= { snVLanCAREntry 14 }
snVLanCARStatCurBurst OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current received burst size."
::= { snVLanCAREntry 15 }
-- end of snVLanCARTable
END