mibs/MIBS/ibm/IBM-ENETDISPATCHER-MIB

1407 lines
41 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- MIB created 5/06/99 21:05:56, by
-- SMIC (the next generation) version 1.6.29, November 22, 1994.
IBM-ENETDISPATCHER-MIB DEFINITIONS ::= BEGIN
-- From file: "ibmenetd.mi2"
-- Compile options "G A T M"
IMPORTS
Counter32, Gauge32, Integer32, IpAddress, enterprises
FROM SNMPv2-SMI-v1
OBJECT-TYPE
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215
DisplayString, TruthValue
FROM SNMPv2-TC-v1;
dispatcherMib OBJECT IDENTIFIER ::= { enterprises ibm(2) ibmProd(6) ibmENetDispatcher(144) 1 }
-- MODULE-IDENTITY
-- LastUpdated
-- 9808140000Z
-- OrgName
-- IBM Internet Software
-- ContactInfo
-- Mr. Dana R. Thalheimer
-- Postal: IBM Networking Software
-- Dept HLGA/Bldg 502
-- PO Box 12195
-- 4205 S. Miami Blvd.
-- Research Triangle Park, NC 27709
--
-- Mr. Chris Gage
-- Postal: IBM Networking Software
-- Dept HLGA/Bldg 502
-- PO Box 12195
-- 4205 S. Miami Blvd.
-- Research Triangle Park, NC 27709
-- Descr
-- This MIB module contains traps and operational information
-- for the IBM eNetworkDispatcher.
-- RevDate
-- 9711150000Z
-- RevDescr
-- The initial revision of this MIB module.
dispatcherMibTraps OBJECT IDENTIFIER ::= { dispatcherMib 0 }
dispatcherMibAdmin OBJECT IDENTIFIER ::= { dispatcherMib 1 }
dispatcherMibObjects OBJECT IDENTIFIER ::= { dispatcherMib 2 }
dispatcherMibConformance OBJECT IDENTIFIER ::= { dispatcherMib 3 }
indStatus OBJECT IDENTIFIER ::= { dispatcherMibObjects 1 }
indConfig OBJECT IDENTIFIER ::= { dispatcherMibObjects 2 }
indExecStatObjects OBJECT IDENTIFIER ::= { indStatus 1 }
indHiAvailStatObjects OBJECT IDENTIFIER ::= { indStatus 6 }
indExecCnfgObjects OBJECT IDENTIFIER ::= { indConfig 1 }
indClstrCnfgTable OBJECT IDENTIFIER ::= { indConfig 2 }
indPortCnfgTable OBJECT IDENTIFIER ::= { indConfig 3 }
indSrvrCnfgTable OBJECT IDENTIFIER ::= { indConfig 4 }
indHiAvailCnfgObjects OBJECT IDENTIFIER ::= { indConfig 6 }
indReachCnfgTable OBJECT IDENTIFIER ::= { indConfig 7 }
indMngrCnfgObjects OBJECT IDENTIFIER ::= { indConfig 10 }
indMibCompliances OBJECT IDENTIFIER ::= { dispatcherMibConformance 1 }
indMibGroups OBJECT IDENTIFIER ::= { dispatcherMibConformance 2 }
indMibStatGroups OBJECT IDENTIFIER ::= { indMibGroups 1 }
indMibCnfgGroups OBJECT IDENTIFIER ::= { indMibGroups 2 }
Percentages ::= Integer32(0..100)
-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
-- Number from 0 to 100 representing the percentages of
-- the given object.
GaugeNeg1 ::= Integer32(-1..2147483647)
-- TEXTUAL-CONVENTION
-- Status
-- mandatory
-- Descr
-- Number with Gauge32 behavior, with the additional feature
-- that the value can go to negative 1.
esNonForAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Non forwarding address, any packet sent to this
address will be handled by the Network Dispatcher
machine itself and will not be forwarded"
::= { indExecStatObjects 1 }
esVersion OBJECT-TYPE
SYNTAX DisplayString
-- Rsyntax OCTET STRING(SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the executor"
::= { indExecStatObjects 2 }
esNumClust OBJECT-TYPE
SYNTAX Gauge32
-- Units
-- clusters
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current number of clusters"
::= { indExecStatObjects 3 }
esTotalPkts OBJECT-TYPE
SYNTAX Counter32
-- Units
-- packets
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of packets received
by the executor since it started."
::= { indExecStatObjects 4 }
esTooShortPkts OBJECT-TYPE
SYNTAX Counter32
-- Units
-- packets
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of packets discarded by the executor,
since the executor started, because the packet
headers were too short."
::= { indExecStatObjects 5 }
esNonForPkts OBJECT-TYPE
SYNTAX Counter32
-- Units
-- packets
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of packets sent to the non forwarding address
since the executor started."
::= { indExecStatObjects 6 }
esClstrDscrdPkts OBJECT-TYPE
SYNTAX Counter32
-- Units
-- packets
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of packets discarded by the executor
since the executor started, which were forwarded to
a cluster, but were discarded because either:
-the port did not exist, or
-the port existed but had no servers"
::= { indExecStatObjects 7 }
esClstrErrPkts OBJECT-TYPE
SYNTAX Counter32
-- Units
-- packets
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of packets not sent, since the
executor started, because of a network adapter
failure"
::= { indExecStatObjects 8 }
esClstrLocalPkts OBJECT-TYPE
SYNTAX Counter32
-- Units
-- packets
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of packets since the executor started,
not for the non forwarding address, or any cluster,
but to be processed locally, by the Network
Dispatcher machine"
::= { indExecStatObjects 9 }
esClstrOwnAddrPkts OBJECT-TYPE
SYNTAX Counter32
-- Units
-- packets
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of packets since the executor
started, explicitly forwarded to a server
located on the Network Dispatcher machine"
::= { indExecStatObjects 10 }
esClstrForPkts OBJECT-TYPE
SYNTAX Counter32
-- Units
-- packets
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of packets since the executor
started, forwarded to any cluster"
::= { indExecStatObjects 11 }
esForErrPkts OBJECT-TYPE
SYNTAX Counter32
-- Units
-- packets
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of packets with forwarding errors
since the executor started. The following are
the scenarios which affect this counter:
-There was an error extracting an encapsulated
packet which came in from a wide area Network
Dispatcher
-An attempt to forward the packet to either a
local or remote server failed."
::= { indExecStatObjects 12 }
esNotClstrPkts OBJECT-TYPE
SYNTAX Counter32
-- Units
-- packets
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of packets not addressed to
any active cluster and port, since the executor
started"
::= { indExecStatObjects 13 }
esHashBkts OBJECT-TYPE
SYNTAX Gauge32
-- Units
-- hash Buckets
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current number of occupied hash buckets. Hash buckets
correspond to IP address/port pairs. If this number
is very low, it may indicate that the servers are getting
many hits from a small number of clients. This number
gives an indication of the client pool diversity."
::= { indExecStatObjects 14 }
esStartTime OBJECT-TYPE
SYNTAX Counter32
-- Units
-- seconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time when the executor was started,
in seconds from January 1, 1970"
::= { indExecStatObjects 15 }
indClstrStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF IndClstrStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of cluster table entries. The number of entries
should equal the current number of clusters, esNumClust.
The cluster table has a row for each cluster, Each row
has information about the current status of that cluster."
::= { indStatus 2 }
indClstrStatEntry OBJECT-TYPE
SYNTAX IndClstrStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A cluster table entry describing current status of the cluster.
The cluster table has a row for each cluster.
Rows in this table can not be created or deleted via SNMP commands"
INDEX { csAddr }
::= { indClstrStatTable 1 }
IndClstrStatEntry ::= SEQUENCE {
csAddr IpAddress,
csNumPorts Gauge32,
csActiveSYNs Counter32,
csDroppedFINs Counter32,
csDroppedACKs Counter32,
csDroppedRSTs Counter32,
csDroppedPKTs Counter32,
csNonExistingPKTs Counter32
}
csAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The cluster address in dotted decimal format"
::= { indClstrStatEntry 1 }
csNumPorts OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of ports for this cluster"
::= { indClstrStatEntry 2 }
csActiveSYNs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"TH_SYNs on active connection. This variable indicates the
number of requests for new connections, where those new
connections are the same as current active connections,
those not in FIN state.
A high rate of growth in this variable could indicate
slow or no response from servers in this cluster."
::= { indClstrStatEntry 3 }
csDroppedFINs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FINs dropped due to no connection. Rapid increase in this
variable could indicate that the staletimeout is too low.
Any percentage greater than 1% of total packets forwarded
could indicate a problem."
::= { indClstrStatEntry 4 }
csDroppedACKs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ACKSs dropped due to no connection. Rapid increase in this
variable could indicate that the staletimeout is too low.
Any percentage greater than 1% of total packets forwarded
could indicate a problem."
::= { indClstrStatEntry 5 }
csDroppedRSTs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"RSTs dropped due to no connection. Rapid increase in this
variable could indicate that the staletimeout is too low.
Any percentage greater than 1% of total packets forwarded
could indicate a problem."
::= { indClstrStatEntry 6 }
csDroppedPKTs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PKTSs dropped due to no connection. Rapid increase in this
variable could indicate that the staletimeout is too low.
Any percentage greater than 1% of total packets forwarded
could indicate a problem."
::= { indClstrStatEntry 7 }
csNonExistingPKTs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This variable has no meaning and is deprecated"
::= { indClstrStatEntry 8 }
indPortStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF IndPortStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of port table entries. The number of entries
equals the sum of the number of ports for each cluster.
Each row in the table provides current status information
for a port."
::= { indStatus 3 }
indPortStatEntry OBJECT-TYPE
SYNTAX IndPortStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A port entry describing current status of the port. The port
table has an entry for each cluster, port combination.
Rows in this table can not be created or deleted via SNMP commands"
INDEX { csAddr, psNum }
::= { indPortStatTable 1 }
IndPortStatEntry ::= SEQUENCE {
psNum Integer32,
psNumServers Gauge32,
psNumNodesDown Gauge32
}
psNum OBJECT-TYPE
SYNTAX Integer32(0..65535)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Number of this port"
::= { indPortStatEntry 1 }
psNumServers OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current number of servers on this port"
::= { indPortStatEntry 2 }
psNumNodesDown OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of down servers"
::= { indPortStatEntry 3 }
indSrvrStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF IndSrvrStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of server table entries. The number of entries
equals the sum of the number of servers for each port.
Each server table entry provides current status
information about the port."
::= { indStatus 4 }
indSrvrStatEntry OBJECT-TYPE
SYNTAX IndSrvrStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A server entry describing current status of the server. There is
a row in the server table for each cluster, port, server combination.
Rows in this table can not be created or deleted via SNMP commands"
INDEX { csAddr, psNum, ssAddr }
::= { indSrvrStatTable 1 }
IndSrvrStatEntry ::= SEQUENCE {
ssAddr IpAddress,
ssActiveConns Gauge32,
ssNewConns Gauge32,
ssTotalConns Counter32,
ssTotalTcpConns Counter32,
ssTotalUdpConns Counter32,
ssFinConns Gauge32,
ssCompleteConns Counter32,
ssWeight GaugeNeg1,
ssSavedWeight GaugeNeg1,
ssPortLoad GaugeNeg1,
ssSystemLoad Integer32,
ssActiveConnsWeight Integer32,
ssNewConnsWeight Integer32,
ssPortLoadWeight Integer32,
ssSystemLoadWeight Integer32
}
ssAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Server address in dotted decimal notation"
::= { indSrvrStatEntry 1 }
ssActiveConns OBJECT-TYPE
SYNTAX Gauge32
-- Units
-- connections
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current active connections for this server"
::= { indSrvrStatEntry 2 }
ssNewConns OBJECT-TYPE
SYNTAX Gauge32
-- Units
-- connections
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Change in the number of total connections over the
last interval."
::= { indSrvrStatEntry 3 }
ssTotalConns OBJECT-TYPE
SYNTAX Counter32
-- Units
-- connections
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total connections for this server, since the server
was added to the currently running executor"
::= { indSrvrStatEntry 4 }
ssTotalTcpConns OBJECT-TYPE
SYNTAX Counter32
-- Units
-- connections
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total TCP connections for this server, since the server
was added to the currently running executor.
ssTotalTcpConns plus ssTotalUdpConns equals ssTotalConns."
::= { indSrvrStatEntry 5 }
ssTotalUdpConns OBJECT-TYPE
SYNTAX Counter32
-- Units
-- connections
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total UDP connections for this server, since the server
was added to the currently running executor.
ssTotalTcpConns plus ssTotalUdpConns equals ssTotalConns."
::= { indSrvrStatEntry 6 }
ssFinConns OBJECT-TYPE
SYNTAX Gauge32
-- Units
-- connections
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current number of connections in FIN state"
::= { indSrvrStatEntry 7 }
ssCompleteConns OBJECT-TYPE
SYNTAX Counter32
-- Units
-- connections
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of completed connections for this server,
since the server was added to the currently running
executor."
::= { indSrvrStatEntry 8 }
ssWeight OBJECT-TYPE
SYNTAX GaugeNeg1
-- Rsyntax Integer32(-1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current weight for this server. When the weight is zero the
executor will no longer forward packets to this server. A
weight of -1 indicates that the Network Dispatcher administrator
has explicitly marked the server down."
::= { indSrvrStatEntry 9 }
ssSavedWeight OBJECT-TYPE
SYNTAX GaugeNeg1
-- Rsyntax Integer32(-1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Weight the server had when marked down. This weight will
be restored when the server is marked up."
::= { indSrvrStatEntry 10 }
ssPortLoad OBJECT-TYPE
SYNTAX GaugeNeg1
-- Rsyntax Integer32(-1..2147483647)
-- Units
-- milliseconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of milliseconds an advisor took to complete a
protocol specific request to the server. If the value
is -1, the advisor could not complete the request to
the server."
::= { indSrvrStatEntry 11 }
ssSystemLoad OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value is the number that the ISS agent provides
to the ISS monitor for this server.
The variable is only valid if ISS is monitoring an ISS
agent on this server. Otherwise, the value has no
meaning."
::= { indSrvrStatEntry 12 }
ssActiveConnsWeight OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The weight calculated by the manager for the
active connections measurement"
::= { indSrvrStatEntry 13 }
ssNewConnsWeight OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The weight calculated by the manager for the
new connections measurement"
::= { indSrvrStatEntry 14 }
ssPortLoadWeight OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The weight calculated by the manager for the
port load measurement"
::= { indSrvrStatEntry 15 }
ssSystemLoadWeight OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The weight calculated by the manager for the
system load measurement"
::= { indSrvrStatEntry 16 }
indRulesStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF IndRulesStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of rule table entries. There is no limit on the number
of rules. The number of entries is the same as the number of
entries in the indRulesCnfgTable. Each status entry provides
current status information about the rule."
::= { indStatus 5 }
indRulesStatEntry OBJECT-TYPE
SYNTAX IndRulesStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A rule table entry describing the current status of a rule.
There is a one to one correspondence between rows of this
table and rows in the IndRulesCnfgTable.
Rows in this table can not be created or deleted via SNMP commands"
INDEX { csAddr, psNum, rcIndex }
-- Augments indRulesCnfgEntry
::= { indRulesStatTable 1 }
IndRulesStatEntry ::= SEQUENCE {
rsTimesFired Counter32,
rsNumSrvrs Gauge32
}
rsTimesFired OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of times this rule has fired"
::= { indRulesStatEntry 2 }
rsNumSrvrs OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of servers which this rule services."
::= { indRulesStatEntry 3 }
hasPrimary OBJECT-TYPE
SYNTAX INTEGER {
primary(0),
backup(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether this machine is the primary or backup machine.
-primary (0)
-backup (1)"
::= { indHiAvailStatObjects 1 }
hasPort OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Port used by both primary and backup Network Dispatcher machines for
heartbeat messages."
::= { indHiAvailStatObjects 2 }
hasState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
listen(1),
active(2),
standby(3),
preempt(4),
elect(5),
noExec(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of this Network Dispatcher machine.
-idle, (0) this machine is routing packets and is not trying
to establish contact with its partner Network
Dispatcher
-listen, (1) high availability has just started and
network dispatcher is listening for partner,
-active, (2) this machine is routing packets.
-standby,(3) this machine is monitoring the active machine.
-preempt,(4) transitory state during switch from primary to backup
-elect, (5) network dispatcher is negotiating with partner
for who will primary or backup
-no_exec,(6) the executor is not running"
::= { indHiAvailStatObjects 3 }
hasSubState OBJECT-TYPE
SYNTAX INTEGER {
notSynchronized(0),
synchronized(1),
syncIn(2),
syncOut(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"High Availability sub state:
Synchronized and notSynchronized are normal, synchIn and synchOut are
transitory. If the Network Dispatcher machine appears to be stuck
(for more than a minute), in a transitory state then that indicates
a problem.
If HighAvailability should be running and the substate is notSynchronized,
then that indicates a problem.
If High Availability is not running and the hasState is idle, then
all subState data is meaningless and should be ignored.
notSynchronized (0), network dispatcher is not in conact with partner machine
synchronized (1), network dispatcher is in contact with partner machine
sync-in (2), network dispatcher is going into standby state
sync-out (3), network dispatcher is going into active state"
::= { indHiAvailStatObjects 4 }
indReachStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF IndReachStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of reach table entries. The number of entries
is typically less than 10, with a maximum of 32."
::= { indStatus 7 }
indReachStatEntry OBJECT-TYPE
SYNTAX IndReachStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A reach table entry includes the address being pinged, and whether
the ping of that address was successful.
Rows in this table can not be created or deleted via SNMP commands"
INDEX { rsAddr }
::= { indReachStatTable 1 }
IndReachStatEntry ::= SEQUENCE {
rsAddr IpAddress,
rsPingAble INTEGER
}
rsAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The address the reach advisor pings."
::= { indReachStatEntry 1 }
rsPingAble OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
reachable(1),
unreachable(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Whether this reach address (rsAddr) responded to a ping.
unknown (0), the rsAddr is unknown, possibly because the
reach advisor is not started.
reachable (1), the rsAddr was pinged successfully
unreachable (2) the rsAddr was not pinged successfully"
::= { indReachStatEntry 2 }
indRulesCnfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IndRulesCnfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of rule config table entries There is no limit
to the number of rule entries. Each rule table row
describes rule configuration information."
::= { indConfig 5 }
indRulesCnfgEntry OBJECT-TYPE
SYNTAX IndRulesCnfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A rule config table entry has information about the
current configuration of the rule.
Rows in this table can not be created or destroyed via SNMP commands."
INDEX { csAddr, psNum, rcIndex }
::= { indRulesCnfgTable 1 }
IndRulesCnfgEntry ::= SEQUENCE {
rcIndex Integer32,
rcName DisplayString,
rcType INTEGER,
rcBeginRange Integer32,
rcEndRange Integer32,
rcPriority Integer32,
rcSrvrList DisplayString
}
rcIndex OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique number assigned to each rule in
a cluster, port combination"
::= { indRulesCnfgEntry 1 }
rcName OBJECT-TYPE
SYNTAX DisplayString
-- Rsyntax OCTET STRING(SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The user defined name of the rule. Rule names are
not necessarily unique."
::= { indRulesCnfgEntry 2 }
rcType OBJECT-TYPE
SYNTAX INTEGER {
true(0),
ip(1),
port(2),
time(3),
connection(4),
active(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of rule
true (0), rules of this type are always true
ip (1), the rule is based on the client IP address
port (2), the rule is based on the client port
time (3), the rule is based on the time of day
connection (4), the rule is based on the number of
connections per second for the port
active (5) the rule is based on the number total
active connections for the port"
::= { indRulesCnfgEntry 3 }
rcBeginRange OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The lower value in the range used to determine
if the rule is true or not. The data is
meaningless for rule type 0."
::= { indRulesCnfgEntry 4 }
rcEndRange OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The higher value in the range used to determine
if the rule is true or not. The data is
meaningless for rule type 0."
::= { indRulesCnfgEntry 5 }
rcPriority OBJECT-TYPE
SYNTAX Integer32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The rule priority. Lower numbers are a
higher priority. Rule priority determines
the order in which rules are evaluated."
::= { indRulesCnfgEntry 6 }
rcSrvrList OBJECT-TYPE
SYNTAX DisplayString
-- Rsyntax OCTET STRING(SIZE(0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The list of servers this rule services. The server addresses
are represented as strings in dotted decimal notation, separated
by plus signs. For example, 37.44.24.13+12.23.54.76+9.67.127.82"
::= { indRulesCnfgEntry 7 }
indHrtBeatCnfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IndHrtBeatCnfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of heartBeat Table entries. The number
of entries is usually less than the number of
interface cards in the Network Dispatcher machine.
The maximum is 32.
The heart beat table lists each of the monitoring
and responding heartbeat pairs."
::= { indConfig 8 }
indHrtBeatCnfgEntry OBJECT-TYPE
SYNTAX IndHrtBeatCnfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A indHrtBeatCnfg entry describing the monitoring
and responding addresses. Each heart beat source address
and heart beat destination address pair is unique.
Rows in this table can not be created or deleted via SNMP commands"
INDEX { hbcSrcAddr, hbcDestAddr }
::= { indHrtBeatCnfgTable 1 }
IndHrtBeatCnfgEntry ::= SEQUENCE {
hbcSrcAddr IpAddress,
hbcDestAddr IpAddress,
hbcNumber Integer32
}
hbcSrcAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Address from which Network Dispatcher machine issues heartbeat
monitoring to its partner"
::= { indHrtBeatCnfgEntry 1 }
hbcDestAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Address of Network Dispatcher machine who's status is being monitored."
::= { indHrtBeatCnfgEntry 2 }
hbcNumber OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An integer number assigned to the heart beat pair."
::= { indHrtBeatCnfgEntry 3 }
indAdvsrCnfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IndAdvsrCnfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of advisor config table entries. The number of entries
equals the number of ports times the number of advisors. Each
advisor table row describes the current status of the advisor,
port combination."
::= { indConfig 9 }
indAdvsrCnfgEntry OBJECT-TYPE
SYNTAX IndAdvsrCnfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An advisor entry describing current configuration of the Advisor. There is
an advisor table entry for each advisor, port combination.
Rows in this table can not be created or deleted via SNMP commands"
INDEX { acPort }
::= { indAdvsrCnfgTable 1 }
IndAdvsrCnfgEntry ::= SEQUENCE {
acPort Integer32,
acName DisplayString,
acVersion DisplayString
}
acPort OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Number of the port that the advisor is monitoring"
::= { indAdvsrCnfgEntry 1 }
acName OBJECT-TYPE
SYNTAX DisplayString
-- Rsyntax OCTET STRING(SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of the advisor. Some of the possible values are:
FTP, HTTP, NNTP, POP3, SMTP, SSL, Telnet. and custom
advisor names."
::= { indAdvsrCnfgEntry 2 }
acVersion OBJECT-TYPE
SYNTAX DisplayString
-- Rsyntax OCTET STRING(SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current version of the advisor"
::= { indAdvsrCnfgEntry 3 }
mcInterval OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
-- Units
-- seconds
ACCESS read-write
STATUS mandatory
DESCRIPTION
"How often the manager will update server
weights, in seconds."
::= { indMngrCnfgObjects 1 }
mcRefresh OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
-- Units
-- mngrIntervals
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of manager intervals (mcInterval) before
querying the executor for a refresh of information
about new and active connections"
::= { indMngrCnfgObjects 2 }
mcActiveProp OBJECT-TYPE
SYNTAX Percentages
-- Rsyntax Integer32(0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number from 0 to 100 representing the relative importance
of active connections. This number is used by the manager,
in calculating server weights.
The sum of mcActiveProp, mcNewProp, mcPortProp, and
mcSystemProp, must be 100"
::= { indMngrCnfgObjects 3 }
mcNewProp OBJECT-TYPE
SYNTAX Percentages
-- Rsyntax Integer32(0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number from 0 to 100 representing the relative importance
of new connections. This number is used by the manager,
in calculating server weights.
The sum of mcActiveProp, mcNewProp, mcPortProp, and
mcSystemProp, must be 100"
::= { indMngrCnfgObjects 4 }
mcPortProp OBJECT-TYPE
SYNTAX Percentages
-- Rsyntax Integer32(0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number from 0 to 100 representing the relative importance
of port advisor information. This number is used by the
manager, in calculating server weights.
The sum of mcActiveProp, mcNewProp, mcPortProp, and
mcSystemProp, must be 100"
::= { indMngrCnfgObjects 5 }
mcSystemProp OBJECT-TYPE
SYNTAX Percentages
-- Rsyntax Integer32(0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number from 0 to 100 representing the relative importance
of the information from system metrics, such as ISS. This
number is used by the manager, in calculating server weights.
The sum of mcActiveProp, mcNewProp, mcPortProp, and
mcSystemProp, must be 100"
::= { indMngrCnfgObjects 6 }
mcSensitivity OBJECT-TYPE
SYNTAX Percentages
-- Rsyntax Integer32(0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Minimum sensitivity to weight updates. This setting defines
when the manager should change its weighting for the server
based on external information"
::= { indMngrCnfgObjects 7 }
mcSmoothing OBJECT-TYPE
SYNTAX Percentages
-- Rsyntax Integer32(0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Index that smoothes the variations in weight when load balancing.
Smoothing can reduce the changes in weights from interval to
interval. The higher the smoothing value the less the weight will
change from interval to interval. 1.5 is a typical value. 4, for
example, is a high smoothhing value and would reduce the change in
weight from interval to interval to almost nothing.
The value is a percentage. For example a value of 155 should be
treated as 1.55 by managing applications."
::= { indMngrCnfgObjects 8 }
mcVersion OBJECT-TYPE
SYNTAX DisplayString
-- Rsyntax OCTET STRING(SIZE(0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the manager"
::= { indMngrCnfgObjects 9 }
indAllSrvrsCnfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF IndAllSrvrsCnfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of all servers table entries. The number of entries
equals the number of different servers configured."
::= { indConfig 11 }
indAllSrvrsCnfgEntry OBJECT-TYPE
SYNTAX IndAllSrvrsCnfgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An all servers table entry describing operational aspects of
servers. This table is a list of all the servers currently
configured in Network Dispatcher.
Rows in this table can not be created or deleted via SNMP"
INDEX { ascAddr }
::= { indAllSrvrsCnfgTable 1 }
IndAllSrvrsCnfgEntry ::= SEQUENCE {
ascAddr IpAddress,
ascQuiesced TruthValue,
ascInstances Gauge32
}
ascAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The IP Address of the server in dotted decimal format"
::= { indAllSrvrsCnfgEntry 1 }
ascQuiesced OBJECT-TYPE
SYNTAX TruthValue
-- Rsyntax INTEGER {
-- true(1),
-- false(2)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"True if this server has been quiesced, false otherwise.
When a server is quiesced, no more connections are sent
to the server. A server can be quiesced via the
ndcontrol manager quiesce command.
True=1, False=2."
::= { indAllSrvrsCnfgEntry 2 }
ascInstances OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The current number of times this server, ascAddr, is in the
configuration."
::= { indAllSrvrsCnfgEntry 3 }
indHighAvailStatus TRAP-TYPE
-- Reverse mappable trap
ENTERPRISE dispatcherMib
VARIABLES {
hasState }
-- Status
-- mandatory
DESCRIPTION
"This trap announces that the value of the high availability
status state (hasState) variable has changed. The possible
values of hasState and their respective meanings are:
-idle, (0) this machine is routing packets and is not trying
to establish contact with its partner Network
Dispatcher
-listen, (1) high availability has just started and
network dispatcher is listening for partner,
-active, (2) this machine is routing packets.
-standby,(3) this machine is monitoring the active machine.
-preempt,(4) transitory state during switch from primary to backup
-elect, (5) network dispatcher is negotiating with partner
for who will primary or backup
-no_exec,(6) the executor is not running"
::= 1
indSrvrGoneDown TRAP-TYPE
-- Reverse mappable trap
ENTERPRISE dispatcherMib
VARIABLES {
ssActiveConns }
-- Status
-- mandatory
DESCRIPTION
"This trap announces that the weight for the server specified
by the csAddr, psNum, ssAddr portion of the Object Identifier
has gone to zero, The last known number of active connections
for the server is sent in the trap.
This trap indicates that, as far as Network Dispatcher can
determine, the specified server has gone down."
::= 2
indMibExecStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 1 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- ...
-- objects
-- esNonForAddr, esVersion, esNumClust, esTotalPkts,
-- esTooShortPkts, esNonForPkts, esClstrDscrdPkts,
-- esClstrErrPkts, esClstrLocalPkts, esClstrOwnAddrPkts,
-- esClstrForPkts, esForErrPkts, esNotClstrPkts, esHashBkts,
-- esStartTime
indMibClstrStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 2 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- ...
-- objects
-- csNumPorts, csActiveSYNs, csDroppedFINs, csDroppedACKs,
-- csDroppedRSTs, csDroppedPKTs, csNonExistingPKTs
indMibPortStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 3 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- ...
-- objects
-- psNumServers, psNumNodesDown
indMibSrvrStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 4 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- ...
-- objects
-- ssActiveConns, ssNewConns, ssTotalConns, ssTotalTcpConns,
-- ssTotalUdpConns, ssFinConns, ssCompleteConns, ssWeight,
-- ssSavedWeight, ssPortLoad, ssSystemLoad, ssActiveConnsWeight,
-- ssNewConnsWeight, ssPortLoadWeight, ssSystemLoadWeight
indMibRulesStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 5 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- ...
-- objects
-- rsTimesFired, rsNumSrvrs
indMibHiAvailStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 6 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- ...
-- objects
-- hasPrimary, hasPort, hasState, hasSubState
indMibReachStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 7 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- ...
-- objects
-- rsPingAble
indMibRulesCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 5 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- ...
-- objects
-- rcName, rcType, rcBeginRange, rcEndRange, rcPriority,
-- rcSrvrList
indMibHrtBeatCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 8 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- ...
-- objects
-- hbcNumber
indMibAdvsrCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 9 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- ...
-- objects
-- acName, acVersion
indMibMngrCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 10 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- ...
-- objects
-- mcInterval, mcRefresh, mcActiveProp, mcNewProp, mcPortProp,
-- mcSystemProp, mcSensitivity, mcSmoothing, mcVersion
indMibAllSrvrsCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 11 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- ...
-- objects
-- ascQuiesced, ascInstances
indMibCompliance OBJECT IDENTIFIER ::= { indMibCompliances 1 }
-- MODULE-COMPLIANCE
-- Status
-- mandatory
-- Descr
-- The compliance statement for the Dispatcher MIB module.
-- Module
-- >>current<<
-- MandGroup
-- indMibExecStatGroup
-- MandGroup
-- indMibClstrStatGroup
-- MandGroup
-- indMibPortStatGroup
-- MandGroup
-- indMibSrvrStatGroup
END