mibs/MIBS/ibm/IBMHPRNCL-MIB

IBMHPRNCL-MIB DEFINITIONS ::= BEGIN

  IMPORTS
          enterprises, Counter, TimeTicks, Gauge
                 FROM RFC1155-SMI


          DisplayString
                 FROM RFC1213-MIB

          OBJECT-TYPE
                 FROM RFC-1212;


-- IMPORTS
--    MODULE-IDENTITY, Unsigned32, Counter32, TimeTicks, OBJECT-TYPE,
--    enterprises
--          FROM SNMPv2-SMI
--    OBJECT-GROUP, MODULE-COMPLIANCE
--          FROM SNMPv2-CONF
--    DisplayString
--          FROM SNMPv2-TC;

-- ibmHprNcl MODULE-IDENTITY
--    LAST-UPDATED "9611080000Z"
--    ORGANIZATION "IBM"
--    CONTACT-INFO "Bob Moore (remoore @ ralvm6)
--                  IBM Corporation
--                  800 Park Offices Drive
--                  RHJA/664
--                  P.O. Box 12195
--                  Research Triangle Park, NC 27709, USA
--                  Tel:    1 919 254 4436
--                  E-mail: remoore@ralvm6.vnet.ibm.com"

--    DESCRIPTION
--        "This MIB module represents the HPR NCL group from the original
--        IBM version of the HPR MIB, updated to SNMPv2 SMI.  It is set
--        up to use as its anchor point the same OID that identified the
--        group in the IBM-HPR-MIB, so that existing manager applications
--        will not need to change."

--    ::= { hpr 3 }

-- The following OID assignments result in the same OIDs for the
-- objects in the port DLC trace group as those in the IBM-6611-APPN-MIB.
ibm                     OBJECT IDENTIFIER ::= { enterprises 2 }
ibmArchitecture         OBJECT IDENTIFIER ::= { ibm 5 }
hpr                     OBJECT IDENTIFIER ::= { ibmArchitecture 10 }

ibmHprNcl               OBJECT IDENTIFIER ::= {hpr     3}

-- **********************************************************************
ibmHprNclGlobe          OBJECT IDENTIFIER ::= { ibmHprNcl 1 }
-- **********************************************************************

ibmHprNclGlobeCtrState  OBJECT-TYPE
      SYNTAX INTEGER {
                        notActive(1),
                        active(2)
                       }
      ACCESS read-write
      STATUS mandatory
      DESCRIPTION
          "This object is used for a network management station to turn
          on/off the optional counters in the ibmHprNclTable.

              notActive(1) - these counters are not being incremented;
                             their values are always zero
              active(2)    - these counters are being incremented"

      ::= { ibmHprNclGlobe 1 }

ibmHprNclGlobeCtrStateTime OBJECT-TYPE
      SYNTAX TimeTicks
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The timestamp (i.e., the Agent's appnNodeUpTime value) when
          the ibmHprNclGlobeCtrState object was last changed.  This time
          is in hundredths of a second."

      ::= { ibmHprNclGlobe 2 }

ibmHprNclGlobeAssignAnrs   OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of ANR's assigned by this node since it was
          last re-initialized."

      ::= { ibmHprNclGlobe 3 }

-- **********************************************************************
-- The HPR NCL Table
-- This table contains the counters for ANR routing
-- **********************************************************************

ibmHprNclTable OBJECT-TYPE
      SYNTAX SEQUENCE OF IbmHprNclEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
          "The HPR NCL table"

      ::= { ibmHprNcl 2 }

ibmHprNclEntry OBJECT-TYPE
      SYNTAX IbmHprNclEntry
      ACCESS not-accessible
      STATUS mandatory
      DESCRIPTION
          "The EnvId is used as the index to this table."

      INDEX { ibmHprNclEnvId }

      ::= { ibmHprNclTable 1}

IbmHprNclEntry ::= SEQUENCE {
   ibmHprNclEnvId               Gauge,        -- environ id (slot)
     -- receive frame/byte counters from DLC by priority
   ibmHprNclDlcRecvNetFrames    Counter,      -- dcl recv network frames
   ibmHprNclDlcRecvHiFrames     Counter,      -- dcl recv high    frames
   ibmHprNclDlcRecvMedFrames    Counter,      -- dcl recv medium  frames
   ibmHprNclDlcRecvLoFrames     Counter,      -- dcl recv low     frames
   ibmHprNclDlcRecvNetBytes     Counter,      -- dcl recv network bytes
   ibmHprNclDlcRecvHiBytes      Counter,      -- dcl recv high    bytes
   ibmHprNclDlcRecvMedBytes     Counter,      -- dcl recv medium  bytes
   ibmHprNclDlcRecvLoBytes      Counter,      -- dcl recv low     bytes
   ibmHprNclDlcRecvAnrErrors    Counter,      -- dcl recv ANR errors
     -- send frame/byte counters to DLC by priority
   ibmHprNclDlcSendNetFrames    Counter,      -- dcl send network frames
   ibmHprNclDlcSendHiFrames     Counter,      -- dcl send high    frames
   ibmHprNclDlcSendMedFrames    Counter,      -- dcl send medium  frames
   ibmHprNclDlcSendLoFrames     Counter,      -- dcl send low     frames
   ibmHprNclDlcSendNetBytes     Counter,      -- dcl send network bytes
   ibmHprNclDlcSendHiBytes      Counter,      -- dcl send high    bytes
   ibmHprNclDlcSendMedBytes     Counter,      -- dcl send medium  bytes
   ibmHprNclDlcSendLoBytes      Counter,      -- dcl send low     bytes
     -- receive frame/byte counters from RTP by priority
   ibmHprNclRtpRecvNetFrames    Counter,      -- RTP recv network frames
   ibmHprNclRtpRecvHiFrames     Counter,      -- RTP recv high    frames
   ibmHprNclRtpRecvMedFrames    Counter,      -- RTP recv medium  frames
   ibmHprNclRtpRecvLoFrames     Counter,      -- RTP recv low     frames
   ibmHprNclRtpRecvNetBytes     Counter,      -- RTP recv network bytes
   ibmHprNclRtpRecvHiBytes      Counter,      -- RTP recv high    bytes
   ibmHprNclRtpRecvMedBytes     Counter,      -- RTP recv medium  bytes
   ibmHprNclRtpRecvLoBytes      Counter,      -- RTP recv low     bytes
   ibmHprNclRtpRecvAnrErrors    Counter,      -- RTP recv ANR errors
     -- send frame/byte counters to RTP by priority
   ibmHprNclRtpSendNetFrames    Counter,      -- dcl send network frames
   ibmHprNclRtpSendHiFrames     Counter,      -- dcl send high    frames
   ibmHprNclRtpSendMedFrames    Counter,      -- dcl send medium  frames
   ibmHprNclRtpSendLoFrames     Counter,      -- dcl send low     frames
   ibmHprNclRtpSendNetBytes     Counter,      -- dcl send network bytes
   ibmHprNclRtpSendHiBytes      Counter,      -- dcl send high    bytes
   ibmHprNclRtpSendMedBytes     Counter,      -- dcl send medium  bytes
   ibmHprNclRtpSendLoBytes      Counter,      -- dcl send low     bytes
     -- send frame/byte counters to another local routing ncl
   ibmHprNclInterSendNetFrames  Counter,      -- int send network frames
   ibmHprNclInterSendHiFrames   Counter,      -- int send high    frames
   ibmHprNclInterSendMedFrames  Counter,      -- int send medium  frames
   ibmHprNclInterSendLoFrames   Counter,      -- int send low     frames
   ibmHprNclInterSendNetBytes   Counter,      -- int send network bytes
   ibmHprNclInterSendHiBytes    Counter,      -- int send high    bytes
   ibmHprNclInterSendMedBytes   Counter,      -- int send medium  bytes
   ibmHprNclInterSendLoBytes    Counter       -- int send low     bytes
        }

ibmHprNclEnvId OBJECT-TYPE
      SYNTAX Gauge
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The product's internal environment id for this NCL, e.g.,
          adapter number, address space number."

      ::= { ibmHprNclEntry  1 }

ibmHprNclDlcRecvNetFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of network priority frames received from the
          data control layer (DLC)."

      ::= { ibmHprNclEntry  2 }

ibmHprNclDlcRecvHiFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of high priority frames received from the
          data control layer (DLC)."

      ::= { ibmHprNclEntry  3 }

ibmHprNclDlcRecvMedFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of medium priority frames received from the
          data control layer (DLC)."

      ::= { ibmHprNclEntry  4 }

ibmHprNclDlcRecvLoFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of low priority frames received from the data
          control layer (DLC)."

      ::= { ibmHprNclEntry  5 }

ibmHprNclDlcRecvNetBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of network priority bytes received from the
          data control layer (DLC)."

      ::= { ibmHprNclEntry  6 }

ibmHprNclDlcRecvHiBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of high priority bytes received from the data
          control layer (DLC)."

      ::= { ibmHprNclEntry  7 }

ibmHprNclDlcRecvMedBytes  OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of medium priority bytes received from the
          data control layer (DLC)."

      ::= { ibmHprNclEntry  8 }

ibmHprNclDlcRecvLoBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of low priority bytes received from the data
          control layer (DLC)."

      ::= { ibmHprNclEntry  9 }

ibmHprNclDlcRecvAnrErrors OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of frames containing ANR errors which were
          received from the data control layer (DLC)."

      ::= { ibmHprNclEntry 10 }

ibmHprNclDlcSendNetFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of network priority sent to the data control
          layer (DLC)."

      ::= { ibmHprNclEntry 11 }

ibmHprNclDlcSendHiFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of high priority frames sent to the data
          control layer (DLC)."

      ::= { ibmHprNclEntry 12 }

ibmHprNclDlcSendMedFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of medium priority frames sent to the data
          control layer (DLC)."

      ::= { ibmHprNclEntry 13 }

ibmHprNclDlcSendLoFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of low priority frames sent to
              the data control layer (DLC)."

      ::= { ibmHprNclEntry 14 }

ibmHprNclDlcSendNetBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of network priority bytes sent to the data
          control layer (DLC)."

      ::= { ibmHprNclEntry 15 }

ibmHprNclDlcSendHiBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of high priority bytes sent to
              the data control layer (DLC)."


      ::= { ibmHprNclEntry 16 }

ibmHprNclDlcSendMedBytes  OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of medium priority bytes sent to the data
          control layer (DLC)."

      ::= { ibmHprNclEntry 17 }

ibmHprNclDlcSendLoBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of low priority bytes sent to the data
          control layer (DLC)."

      ::= { ibmHprNclEntry 18 }

ibmHprNclRtpRecvNetFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of network priority frames received from a
          local RTP connection."

      ::= { ibmHprNclEntry 19 }

ibmHprNclRtpRecvHiFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of high priority frames received from a local
          RTP connection."

      ::= { ibmHprNclEntry 20 }

ibmHprNclRtpRecvMedFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of medium priority frames received from a
          local RTP connection."


      ::= { ibmHprNclEntry 21 }

ibmHprNclRtpRecvLoFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of low priority frames received from a local
          RTP connection."

      ::= { ibmHprNclEntry 22 }

ibmHprNclRtpRecvNetBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of network priority bytes received from a
          local RTP connection."

      ::= { ibmHprNclEntry 23 }

ibmHprNclRtpRecvHiBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of high priority bytes received from a local
          RTP connection."

      ::= { ibmHprNclEntry 24 }

ibmHprNclRtpRecvMedBytes  OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of medium priority bytes received from a
          local RTP connection."

      ::= { ibmHprNclEntry 25 }

ibmHprNclRtpRecvLoBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of low priority bytes received from a local
          RTP connection."

      ::= { ibmHprNclEntry 26 }


ibmHprNclRtpRecvAnrErrors OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of frames containing ANR errors which were
          received from a local RTP connection."

      ::= { ibmHprNclEntry 27 }

ibmHprNclRtpSendNetFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of network priority sent to a local RTP
          connection."

      ::= { ibmHprNclEntry 28 }

ibmHprNclRtpSendHiFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of high priority frames sent to a local RTP
          connection."

      ::= { ibmHprNclEntry 29 }

ibmHprNclRtpSendMedFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of medium priority frames sent to a local RTP
          connection."

      ::= { ibmHprNclEntry 30 }

ibmHprNclRtpSendLoFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of low priority frames sent to a local RTP
          connection."

      ::= { ibmHprNclEntry 31 }

ibmHprNclRtpSendNetBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of network priority bytes sent to a local RTP
          connection."

      ::= { ibmHprNclEntry 32 }

ibmHprNclRtpSendHiBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of high priority bytes sent to a local RTP
          connection."

      ::= { ibmHprNclEntry 33 }

ibmHprNclRtpSendMedBytes  OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of medium priority bytes sent to a local RTP
          connection."

      ::= { ibmHprNclEntry 34 }

ibmHprNclRtpSendLoBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of low priority bytes sent to a local RTP
          connection."

      ::= { ibmHprNclEntry 35 }

ibmHprNclInterSendNetFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of network priority sent to another local
          routing NCL."

      ::= { ibmHprNclEntry 36 }

ibmHprNclInterSendHiFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of high priority frames sent to another local
          routing NCL."

      ::= { ibmHprNclEntry 37 }

ibmHprNclInterSendMedFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of medium priority frames sent to another
          local routing NCL."

      ::= { ibmHprNclEntry 38 }

ibmHprNclInterSendLoFrames OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of low priority frames sent to another local
          routing NCL."

      ::= { ibmHprNclEntry 39 }

ibmHprNclInterSendNetBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of network priority bytes sent to another
          local routing NCL."

      ::= { ibmHprNclEntry 40 }

ibmHprNclInterSendHiBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of high priority bytes sent to another local
          routing NCL."

      ::= { ibmHprNclEntry 41 }

ibmHprNclInterSendMedBytes  OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of medium priority bytes sent to another
          local routing NCL."

      ::= { ibmHprNclEntry 42 }

ibmHprNclInterSendLoBytes OBJECT-TYPE
      SYNTAX Counter
      ACCESS read-only
      STATUS mandatory
      DESCRIPTION
          "The total number of low priority bytes sent to another local
          routing NCL."

      ::= { ibmHprNclEntry 43 }

-- ******************************************************************
-- IBM HPR NCL conformance
-- ******************************************************************

ibmHprNclCompliances OBJECT IDENTIFIER ::= { ibmHprNcl 3 }
ibmHprNclConfGroups OBJECT IDENTIFIER ::=  { ibmHprNcl 4 }

-- ibmHprNclCompliance MODULE-COMPLIANCE
--    STATUS mandatory
--    DESCRIPTION
--        "The compliance statement for the SNMPv2 entities that
--        implement the IBM HPR NCL function."

--    MODULE

--    MANDATORY-GROUPS
--           { ibmHprNclObjectsConfGroup }

--    ::= { ibmHprNclCompliances 1 }

-- ibmHprNclObjectsConfGroup OBJECT-GROUP
--    OBJECTS {
--             ibmHprNclGlobeCtrState,
--             ibmHprNclGlobeCtrStateTime,
--             ibmHprNclGlobeAssignAnrs,
--             ibmHprNclDlcRecvNetFrames,
--             ibmHprNclDlcRecvHiFrames,
--             ibmHprNclDlcRecvMedFrames,
--             ibmHprNclDlcRecvLoFrames,
--             ibmHprNclDlcRecvNetBytes,
--             ibmHprNclDlcRecvHiBytes,
--             ibmHprNclDlcRecvMedBytes,
--             ibmHprNclDlcRecvLoBytes,
--             ibmHprNclDlcRecvAnrErrors,
--             ibmHprNclDlcSendNetFrames,
--             ibmHprNclDlcSendHiFrames,
--             ibmHprNclDlcSendMedFrames,
--             ibmHprNclDlcSendLoFrames,
--             ibmHprNclDlcSendNetBytes,
--             ibmHprNclDlcSendHiBytes,
--             ibmHprNclDlcSendMedBytes,
--             ibmHprNclDlcSendLoBytes,
--             ibmHprNclRtpRecvNetFrames,
--             ibmHprNclRtpRecvHiFrames,
--             ibmHprNclRtpRecvMedFrames,
--             ibmHprNclRtpRecvLoFrames,
--             ibmHprNclRtpRecvNetBytes,
--             ibmHprNclRtpRecvHiBytes,
--             ibmHprNclRtpRecvMedBytes,
--             ibmHprNclRtpRecvLoBytes,
--             ibmHprNclRtpRecvAnrErrors,
--             ibmHprNclRtpSendNetFrames,
--             ibmHprNclRtpSendHiFrames,
--             ibmHprNclRtpSendMedFrames,
--             ibmHprNclRtpSendLoFrames,
--             ibmHprNclRtpSendNetBytes,
--             ibmHprNclRtpSendHiBytes,
--             ibmHprNclRtpSendMedBytes,
--             ibmHprNclRtpSendLoBytes,
--             ibmHprNclInterSendNetFrames,
--             ibmHprNclInterSendHiFrames,
--             ibmHprNclInterSendMedFrames,
--             ibmHprNclInterSendLoFrames,
--             ibmHprNclInterSendNetBytes,
--             ibmHprNclInterSendHiBytes,
--             ibmHprNclInterSendMedBytes,
--             ibmHprNclInterSendLoBytes
--            }
--    STATUS mandatory
--    DESCRIPTION
--        "All of the accessible objects in this module."

--    ::= { ibmHprNclConfGroups 1 }

END