mibs/MIBS/ibm/IBMIROCAUTH-MIB

-- MIB created 5/06/99 21:06:00, by
--   SMIC (the next generation) version 1.6.29, November 22, 1994.

IBMIROCAUTH-MIB DEFINITIONS ::= BEGIN

-- From file: "ibmauth.mi2"
-- Compile options "G A T M"

IMPORTS
    Counter32, Gauge32, Integer32, TimeTicks, IpAddress
            FROM SNMPv2-SMI-v1
    OBJECT-TYPE
            FROM RFC-1212
    TRAP-TYPE
            FROM RFC-1215
    DisplayString, PhysAddress, TruthValue, RowStatus, 
    AutonomousType, TestAndIncr
            FROM SNMPv2-TC-v1
    enterprises
            FROM RFC1155-SMI;

ibmIROCconfigAuth OBJECT IDENTIFIER ::= { ibmIROCconfig 2 }
-- MODULE-IDENTITY
--  LastUpdated
--    9808050900Z
--  OrgName
--    IBM
--  ContactInfo
--    David D. Chen
--     Joe B. Kerr
--     IBM Corporation
--     800 Park, Highway 54
--     Research Triangle Park, NC 27709-9990
--     Tel:    1 919 254 6182
--     E-mail: ddchen@us.ibm.com
--  Descr
--    IBM Authenication.
--  RevDate
--    9808050900Z
--  RevDescr
--    Added the virtual connection configuration parameters,
--     and define Enabled textual convention.
--  RevDate
--    9805050900Z
--  RevDescr
--    The initial version of this MIB module.

ibm             OBJECT IDENTIFIER ::= { enterprises 2 }
ibmProd         OBJECT IDENTIFIER ::= { ibm 6 }
ibm2210         OBJECT IDENTIFIER ::= { ibmProd 72 }
ibmIROC         OBJECT IDENTIFIER ::= { ibmProd 119 }
ibmIROCconfig   OBJECT IDENTIFIER ::= { ibmIROC 7 }
ibmAuthTraps    OBJECT IDENTIFIER ::= { ibmIROCconfigAuth 0 }
ibmAuthMIB      OBJECT IDENTIFIER ::= { ibmIROCconfigAuth 1 }
ibmAuthDomains  OBJECT IDENTIFIER ::= { ibmIROCconfigAuth 2 }
ibmAuthConformance OBJECT IDENTIFIER ::= { ibmIROCconfigAuth 3 }
ibmAuthGeneral  OBJECT IDENTIFIER ::= { ibmAuthMIB 1 }
authCompliances OBJECT IDENTIFIER ::= { ibmAuthConformance 1 }
authGroups      OBJECT IDENTIFIER ::= { ibmAuthConformance 2 }

RowDefinition ::= INTEGER {
        active(1),
        notReady(3),
        createAndGo(4),
        createAndWait(5),
        destroy(6)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This textual convention is used to describe a slight variation on
--     the RowStatus textual convention, defined in SNMPv2-TC.  An
--     object with the syntax of RowDefinition behaves as defined in
--     RowStatus, with the following exceptions:
--     - Upon receipt of an SNMP SET request containing rowDefinition=active,
--       transition from 'notReady' to 'active' occurs
--     - the state of notInService does not exist. In this environment,
--       either the act of row creation is complete and therefore
--       the row is in 'active' state, or the act of row creation
--       is not complete, and therefore the row is in 'notReady' state.

Enabled ::= INTEGER {
        disabled(0),
        enabled(1)
        }
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This textual convention is used to indicate if a function is
--     enabled or disabled.

DateAndTime2 ::= OCTET STRING(SIZE(0..11))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--     A date-time specification that follows the convention
--     defined in SNMPv2-TC for DateAndTime, except allowing
--     for a zero-length string if the date is unknown or not set.

SecureOctetString ::= OCTET STRING(SIZE(0..65535))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    This syntax describes an octet string to which a security
--     mechanism may be applied. The description of the security
--     mechanism is provided by a single octet security descriptor
--     field that preceeds the secured data. The level of security
--     on the data and the security mechanism used to protect the
--     data may vary according to the security descriptor field.
--    
--     The security descriptor field consists of the first
--     octet of the octet string data field. The data to be secured
--     follows according to the security method as shown below:
--         1 octet                        0 or more octets
--     =================================================================
--     | security descriptor | data field according to security method |
--     =================================================================
--    
--     The following values are assigned to the security descriptor
--     field and the corresponding security algorithm.
--     (1) 0x00 (data value not accessible)
--         The appropriate key information has not been provided or setup.
--         The octet string consists only of the security mechanism
--         descriptor field. No data field is provided.
--     (2) 0x01 (no authentication, no encryption)
--         The data field octets flow as clear-text immediately after the
--         security descriptor octet.
--     (3) 0x02 (DES/CBC and SHA-1: encryption and authentication)
--         The data field octets flow according to the algorithym
--         below immediately after the security descriptor octet.
--         The data field octets are treated in the following manner:
--    
--         FIELD         OCTET NUMBER     DESCRIPTION          SECURITY
--         ===========================================================
--         0x02               1          security descriptor    clear
--         +DES seed          2..9       initialization vector  clear
--         +DESEncryptedData  10..10+n   secured data           encrypted
--         +SHA-1 digest      10+n+1+20  secured data           digest
--         where:
--           + denotes concatenation
--           the number in parentheses denotes the length of the field
--           DES IV seed (Initialization Vector) = 8 byte non-reoccurring value
--           DES IV (Initialization Vector) = SysUpTime(4) + SeqNo(4)
--           DESEncryptedData = ASN1_Tag(1)+Length(2)+Data+padding
--              ASN1_Tag = ASN1 tag, e.g., INTEGER(0x02), OCTETSTRING(0x04)
--              Length   = the length of the data to be encrypted
--              Data     = the data to be encrypted
--              padding  = the DESEncryptedData is on 8-octet boundary
--           SHA-1digest : SHA-1 digest consisting of:
--              (0x02(1) + DESseed(8) + DESEncryptedData(*8) + OID)
--           OID :
--              the Object Identifier represented as a concatenation of 4 byte
--              arrays for each level of the naming tree used in the OID.

SecureDisplayString ::= OCTET STRING(SIZE(0..65535))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Same as SecureOctetString, with DisplayString content.

SecureRowDefinition ::= OCTET STRING(SIZE(0..65535))
-- TEXTUAL-CONVENTION
--  Status
--    mandatory
--  Descr
--    Same as SecureOctetString, with RowDefinition content.

authUserProfileTable OBJECT-TYPE
    SYNTAX SEQUENCE OF AuthUserProfileEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Table of named profiles. Used to collect information
         about tunnel profiles and user, e.g., PPP, related
         information."
    ::= { ibmAuthMIB 2 }

authUserProfileEntry OBJECT-TYPE
    SYNTAX AuthUserProfileEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "Each entry is a separate profile with associated attributes."
    INDEX { IMPLIED authUserProfileName }
    ::= { authUserProfileTable 1 }

AuthUserProfileEntry ::= SEQUENCE {
    authUserProfileName DisplayString,
    authUserProfileRowDefinition SecureRowDefinition,
    authUserProfilePassword SecureDisplayString,
    authUserProfileType OCTET STRING,
    authUserProfileMaxConnectTime INTEGER,
    authUserProfileCallbackType INTEGER,
    authUserProfileCallbackNum DisplayString,
    authUserProfileDialout Enabled,
    authUserProfileEncryptionKey SecureOctetString,
    authUserProfileStatus INTEGER,
    authUserProfileExpirationDate DateAndTime2,
    authUserProfileGLoginAllowed INTEGER,
    authUserProfileGLoginsAttempts INTEGER,
    authUserProfileLoginAttempts INTEGER,
    authUserProfileLoginFails INTEGER,
    authUserProfileLoginLock INTEGER,
    authUserProfileIpType INTEGER,
    authUserProfileIpAddr IpAddress,
    authUserProfileIpMask IpAddress,
    authUserProfileHostName DisplayString,
    authUserProfileSharedSecurity SecureDisplayString,
    authUserProfileTunneled Enabled,
    authUserProfileTunnelType INTEGER,
    authUserProfileTunnelMediumType INTEGER,
    authUserProfileTunnelServer DisplayString,
    authUserProfileVcEnabled Enabled,
    authUserProfileVcMaxSuspendTime INTEGER,
    authUserProfileVcIdleTime INTEGER
    }

authUserProfileName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(1..64))
--    Rsyntax OCTET STRING(SIZE(1..64))
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
        "For ppp user, it is the name of the user.  For tunnel
         connection definition, it is the host name of the remote
         tunnel end point."
    ::= { authUserProfileEntry 1 }

authUserProfileRowDefinition OBJECT-TYPE
    SYNTAX SecureRowDefinition
--    Rsyntax OCTET STRING(SIZE(0..65535))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of the row."
    ::= { authUserProfileEntry 2 }

authUserProfilePassword OBJECT-TYPE
    SYNTAX SecureDisplayString
--    Rsyntax OCTET STRING(SIZE(0..65535))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The password for this user. It is used for PPP and SNMP
         users but not tunnel profiles."
    ::= { authUserProfileEntry 3 }

authUserProfileType OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The profile type.  '80'H represents login.  '40'H
         represents tunnel, and '20'H represents ppp, '10'H
         represents snmp.  It is implementation choice to
         restrict to one type per entry (i.e., can't be
         combination of these types) or not support certain
         types of users."
    DEFVAL { '20'h }
    ::= { authUserProfileEntry 4 }

authUserProfileMaxConnectTime OBJECT-TYPE
    SYNTAX INTEGER(-1..2147483647)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The max connection allowed per connection.  A value of
         zero is using the interface default, and negative one (-1)
         indicates no limits."
    DEFVAL { 0 }
    ::= { authUserProfileEntry 5 }

authUserProfileCallbackType OBJECT-TYPE
    SYNTAX INTEGER {
        disabled(0),
        roaming(1),
        required(2)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The type of callback."
    DEFVAL { disabled }
    ::= { authUserProfileEntry 6 }

authUserProfileCallbackNum OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..30))
--    Rsyntax OCTET STRING(SIZE(0..30))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The dial back phone number when callback type is
         required.  An octet string of length zero indicates
         the dial back phone number is not set."
    DEFVAL { "" }
    ::= { authUserProfileEntry 7 }

authUserProfileDialout OBJECT-TYPE
    SYNTAX Enabled
--    Rsyntax INTEGER {
--        disabled(0),
--        enabled(1)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "A user on the network may be requesting permission
         to use dialout function.  This flag attached to the
         user profile determines whether the user is able to
         dialout."
    DEFVAL { disabled }
    ::= { authUserProfileEntry 8 }

authUserProfileEncryptionKey OBJECT-TYPE
    SYNTAX SecureOctetString
--    Rsyntax OCTET STRING(SIZE(0..65535))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The encryption key.  An octet string of length zero indicates
         the encryption key is not set.  The key is used when ECP
         is negotiated for this user."
    DEFVAL { ''h }
    ::= { authUserProfileEntry 9 }

authUserProfileStatus OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(1),
        disabled(2),
        locked(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of the user profile entry.  By setting the
         value to 'enabled' from a non-enabled status will reset
         the following statistics: authUserProfileGLoginsAttempts,
         authUserProfileLoginAttempts, authUserProfileLoginFails,
         authUserProfileLoginLock."
    DEFVAL { enabled }
    ::= { authUserProfileEntry 10 }

authUserProfileExpirationDate OBJECT-TYPE
    SYNTAX DateAndTime2
--    Rsyntax OCTET STRING(SIZE(0..11))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The date and time when the password will be expired.  That is,
         the user will no longer be allowed to dial in after this time.
         A value of zero length indicates no expiration."
    DEFVAL { ''h }
    ::= { authUserProfileEntry 11 }

authUserProfileGLoginAllowed OBJECT-TYPE
    SYNTAX INTEGER(0..2147483647)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Number of grace logins is allowed after expiration
         Some local maximum may apply."
    DEFVAL { 0 }
    ::= { authUserProfileEntry 12 }

authUserProfileGLoginsAttempts OBJECT-TYPE
    SYNTAX INTEGER(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of grace login attempted is attempted after the
         expiration of this user profile.  Some local maximum may apply."
    ::= { authUserProfileEntry 13 }

authUserProfileLoginAttempts OBJECT-TYPE
    SYNTAX INTEGER(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of login attempted, sucessfully or not."
    ::= { authUserProfileEntry 14 }

authUserProfileLoginFails OBJECT-TYPE
    SYNTAX INTEGER(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Total number of login failed."
    ::= { authUserProfileEntry 15 }

authUserProfileLoginLock OBJECT-TYPE
    SYNTAX INTEGER(0..2147483647)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Number of consecutive failed logins attempted.  The number
         is reset to zero after a successful login."
    ::= { authUserProfileEntry 16 }

authUserProfileIpType OBJECT-TYPE
    SYNTAX INTEGER {
        disabled(0),
        single(1),
        networkDials(3),
        singleDials(4)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Ip network type of Dials."
    DEFVAL { single }
    ::= { authUserProfileEntry 17 }

authUserProfileIpAddr OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "IP address for this user."
    DEFVAL { 0.0.0.0 }
    ::= { authUserProfileEntry 18 }

authUserProfileIpMask OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "IP mask for this user."
    DEFVAL { 255.255.255.255 }
    ::= { authUserProfileEntry 19 }

authUserProfileHostName OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..16))
--    Rsyntax OCTET STRING(SIZE(0..16))
--  Units
--    hundredths of a second
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The host name for this user."
    DEFVAL { "" }
    ::= { authUserProfileEntry 20 }

authUserProfileSharedSecurity OBJECT-TYPE
    SYNTAX SecureDisplayString
--    Rsyntax OCTET STRING(SIZE(0..65535))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The shared security between two L2TP Peers."
    ::= { authUserProfileEntry 21 }

authUserProfileTunneled OBJECT-TYPE
    SYNTAX Enabled
--    Rsyntax INTEGER {
--        disabled(0),
--        enabled(1)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of enabled means this PPP user profile
         is a tunneled user."
    DEFVAL { disabled }
    ::= { authUserProfileEntry 22 }

authUserProfileTunnelType OBJECT-TYPE
    SYNTAX INTEGER {
        l2tp(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Tunneling Protocol."
    DEFVAL { l2tp }
    ::= { authUserProfileEntry 23 }

authUserProfileTunnelMediumType OBJECT-TYPE
    SYNTAX INTEGER {
        ip(1)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Tunneling Medium."
    DEFVAL { ip }
    ::= { authUserProfileEntry 24 }

authUserProfileTunnelServer OBJECT-TYPE
    SYNTAX DisplayString(SIZE(0..15))
--    Rsyntax OCTET STRING(SIZE(0..15))
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Tunnel-Server endpoint address.  For IP protocol, it
         is the server IP address in dotted notation."
    DEFVAL { "" }
    ::= { authUserProfileEntry 25 }

authUserProfileVcEnabled OBJECT-TYPE
    SYNTAX Enabled
--    Rsyntax INTEGER {
--        disabled(0),
--        enabled(1)
--        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The value of enabled means this PPP user profile
         is a virtual connection user."
    DEFVAL { disabled }
    ::= { authUserProfileEntry 26 }

authUserProfileVcMaxSuspendTime OBJECT-TYPE
    SYNTAX INTEGER(-1..2147483647)
--  Units
--    hours
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The maximum amount of time (in hours) that the device will
         allow a virtual connection in suspend mode.  After that, the
         device will remove the all states of the virtual connection.
         A value of -1 means use the box default value, 0 means no limits.
         It is device choice to provide reasonable minimum and maximum
         suspend time values."
    DEFVAL { -1 }
    ::= { authUserProfileEntry 27 }

authUserProfileVcIdleTime OBJECT-TYPE
    SYNTAX INTEGER(-1..2147483647)
--  Units
--    seconds
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The device will instruct the dial-in station to suspend the
         real connection after the inactivity for this amount of time.
         A value of -1 means use the box default value, 0 means no limits.
         It is device choice to support 0, and provide reasonable
         minimum and maximum idle time values."
    DEFVAL { -1 }
    ::= { authUserProfileEntry 28 }

authUserProfileGroup OBJECT IDENTIFIER ::= { authGroups 1 }
-- OBJECT-GROUP
--  Status
--    mandatory
--  Descr
--    Conformance group for authentication user profile.
--  objects
--    authUserProfileName, authUserProfilePassword, 
--    authUserProfileType, authUserProfileMaxConnectTime, 
--    authUserProfileCallbackType, authUserProfileCallbackNum, 
--    authUserProfileDialout, authUserProfileEncryptionKey, 
--    authUserProfileStatus, authUserProfileExpirationDate, 
--    authUserProfileGLoginAllowed, authUserProfileGLoginsAttempts, 
--    authUserProfileLoginAttempts, authUserProfileLoginFails, 
--    authUserProfileLoginLock, authUserProfileIpType, 
--    authUserProfileIpAddr, authUserProfileIpMask, 
--    authUserProfileHostName, authUserProfileTunneled, 
--    authUserProfileTunnelType, authUserProfileTunnelMediumType, 
--    authUserProfileTunnelServer, authUserProfileVcEnabled, 
--    authUserProfileVcMaxSuspendTime, authUserProfileVcIdleTime

authUserProfileCompliance OBJECT IDENTIFIER ::= { authCompliances 1 }
-- MODULE-COMPLIANCE
--  Status
--    mandatory
--  Descr
--    The core compliance statement for all authentication.
--  Module
--    >>current<<
--   MandGroup
--    authUserProfileGroup


END