mibs/MIBS/linksys/LINKSYS-TRUNK-MIB

510 lines
17 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
LINKSYS-TRUNK-MIB DEFINITIONS ::= BEGIN
IMPORTS
rnd FROM LINKSYS-MIB
OBJECT-TYPE, IpAddress, Unsigned32,Counter32, TimeTicks,
MODULE-IDENTITY FROM SNMPv2-SMI
DisplayString, TEXTUAL-CONVENTION, TruthValue, RowStatus,
PhysAddress
FROM SNMPv2-TC
dot3adAggIndex, dot3adAggPortIndex FROM IEEE8023-LAG-MIB;
rlDot3adAgg MODULE-IDENTITY
LAST-UPDATED "200612020000Z"
ORGANIZATION "Linksys LLC."
CONTACT-INFO
"www.linksys.com/business/support"
DESCRIPTION
"The private MIB module definition for trunk support in Linksys devices."
REVISION "200612020000Z"
DESCRIPTION
"Initial version of this MIB."
::= { rnd 65 }
rlDot3adAggMibVersion OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MIB's version, the current version is 1."
::= { rlDot3adAgg 1 }
--
-- rlDot3adAggBalanceTable
--
rlDot3adAggBalanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDot3adAggBalanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of this table specifies a balancing criterion used
for the corresponding dot3adAggIndex."
::= { rlDot3adAgg 2 }
rlDot3adAggBalanceEntry OBJECT-TYPE
SYNTAX RlDot3adAggBalanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each dot3adAggIndex."
INDEX { dot3adAggIndex, rlDot3adAggBalanceForwardType }
::= { rlDot3adAggBalanceTable 1 }
RlDot3adAggBalanceEntry ::= SEQUENCE {
rlDot3adAggBalanceForwardType INTEGER,
rlDot3adAggBalanceLayer INTEGER,
rlDot3adAggBalanceUsedAddresses INTEGER,
rlDot3adAggBalanceBroadcastType INTEGER
}
rlDot3adAggBalanceForwardType OBJECT-TYPE
SYNTAX INTEGER {
bridging(1),
routing(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A Forwarding type: Bridging or Routing."
::= { rlDot3adAggBalanceEntry 1 }
rlDot3adAggBalanceLayer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Network Layer Number, may have the following values: 2, 3 or 4.
The default value is:
Bridging: 2
Routing: 3."
::= { rlDot3adAggBalanceEntry 2 }
rlDot3adAggBalanceUsedAddresses OBJECT-TYPE
SYNTAX INTEGER {
notApplied(0),
dstAddr(1),
srcAddr(2),
dstAndSrcAddr(3),
vlanId(4),
ethType(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Network Layer addresses used for Balancing of
unicast frames.
The function sets the criterion (by layer and used address in it)."
DEFVAL { dstAddr }
::= { rlDot3adAggBalanceEntry 3 }
rlDot3adAggBalanceBroadcastType OBJECT-TYPE
SYNTAX INTEGER {
common(0),
dedicated(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies a balancing criterion used for L2 broadcast and unknown
frames:
common:
a link allocated for broadcast and unknown frames is used
for unicast frames too
dedicated:
a link allocated for broadcast and unknown frames is not used
for unicast frames"
DEFVAL { common }
::= { rlDot3adAggBalanceEntry 4 }
rlDot3adAggNumOfTrunks OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of trunks supported by the device."
::= { rlDot3adAgg 3 }
rlDot3adAggMaxPortsInTrunks OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximun number of ports in a trunk."
::= { rlDot3adAgg 4 }
rlDot3adAggTrunkCreationSupport OBJECT-TYPE
SYNTAX INTEGER {
notSupported(0),
supportsTrunkOrLacp(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if there is support to rldot3adAggCreationTable,
and the type of the support:
supportedTrunkOrLacp - ports that are members in some trunk
are belongs to it by manual configuration or by lacp,
but not togther.
notSupported - there is not support to rldot3adAggCreationTable."
::= { rlDot3adAgg 5 }
--
-- rlDot3adAggCreationTable
--
rlDot3adAggCreationTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDot3adAggCreationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of this table is for creation of an aggregator
for the corresponding dot3adAggIndex, when the value of the
rlDot3adAggCreationSupport is diffrent from notSupported."
::= { rlDot3adAgg 6 }
rlDot3adAggCreationEntry OBJECT-TYPE
SYNTAX RlDot3adAggCreationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An information for each dot3adAggIndex."
INDEX { dot3adAggIndex }
::= { rlDot3adAggCreationTable 1 }
RlDot3adAggCreationEntry ::= SEQUENCE {
rlDot3adAggCreationTrunk TruthValue,
rlDot3adAggCreationLacp TruthValue
}
rlDot3adAggCreationTrunk OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aggregator can aggregate ports in manual configuration."
::= { rlDot3adAggCreationEntry 1 }
rlDot3adAggCreationLacp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The aggregator can aggregate ports by lacp."
::= { rlDot3adAggCreationEntry 2 }
rlDot3adAggLoadBalancingPerTrunk OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies if load balancing is defined per trunk
or per device."
::= { rlDot3adAgg 7 }
--
-- rlDot3adAggPortLacpTable
--
rlDot3adAggPortLacpTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDot3adAggPortLacpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of this table specifies lacp protocol state and
statistics for the corresponding dot3adAggPortIndex."
::= { rlDot3adAgg 8 }
rlDot3adAggPortLacpEntry OBJECT-TYPE
SYNTAX RlDot3adAggPortLacpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each dot3adAggPortIndex."
INDEX { dot3adAggPortIndex }
::= { rlDot3adAggPortLacpTable 1 }
RlDot3adAggPortLacpEntry ::= SEQUENCE {
rlDot3adAggPortLacpPdusRx Counter32,
rlDot3adAggPortLacpPDUsTx Counter32,
rlDot3adAggPortLacpRxState INTEGER,
rlDot3adAggPortLacpMuxState INTEGER,
rlDot3adAggPortLacpPeriodicState INTEGER,
rlDot3adAggPortLacpSelected INTEGER,
rlDot3adAggPortLacpReady TruthValue,
rlDot3adAggPortLacpPortMoved TruthValue,
rlDot3adAggPortLacpNNT TruthValue,
rlDot3adAggPortLacpPeriodicTxTimer INTEGER,
rlDot3adAggPortLacpCurrentWhileTimer INTEGER,
rlDot3adAggPortLacpWaitWhileTimer INTEGER
}
rlDot3adAggPortLacpPdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of valid LACPDUs received on this
Aggregation Port. This value is read-only."
::= { rlDot3adAggPortLacpEntry 1 }
rlDot3adAggPortLacpPDUsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of LACPDUs transmitted on this
Aggregation Port. This value is read-only."
::= { rlDot3adAggPortLacpEntry 2 }
rlDot3adAggPortLacpRxState OBJECT-TYPE
SYNTAX INTEGER {
current(1),
expired(2),
defaulted(3),
initialize(4),
portDisabled(5),
lacpDisabled(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute holds the value 'current' if the Receive
state machine for the Aggregation Port is in the
CURRENT state, 'expired' if the Receive state machine
is in the EXPIRED state, 'defaulted' if the Receive state
machine is in the DEFAULTED state, 'initialize' if the
Receive state machine is in the INITIALIZE state,
'portDisabled' if the Receive state machine is in the
PORT_DISABLED state, or 'lacpDisabled' if the Receive state
machine is in the LACP_DISABLED state.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 3 }
rlDot3adAggPortLacpMuxState OBJECT-TYPE
SYNTAX INTEGER {
detached(1),
waiting(2),
attached(3),
collecting(4),
distributing(5),
collectingDistributing(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute holds the value 'detached' if the Mux
state machine for the Aggregation Port is
in the DETACHED state, 'waiting' if the Mux state machine
is in the WAITING state, 'attached' if the Mux state
machine for the Aggregation Port is in the ATTACHED
state, 'collecting' if the Mux state machine for the
Aggregation Port is in the COLLECTING state, 'distributing'
if the Mux state machine for the Aggregation Port is
in the DISTRIBUTING state, and 'collecting_ distributing'
if the Mux state machine for the Aggregation Port is in
the COLLECTING_DISTRIBUTING state.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 4 }
rlDot3adAggPortLacpPeriodicState OBJECT-TYPE
SYNTAX INTEGER {
noPeriodic(1),
fastPeriodic(2),
slowPeriodic(3),
periodicTx(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute holds the value 'noPeriodic' if the Periodic
state machine for the Aggregation Port is
in the NO_PERIODIC state, 'fastPeriodic' if the Mux state machine
is in the FAST_PERIODIC state, 'slowPeriodic' if the Mux state
machine for the Aggregation Port is in the SLOW_PERIODIC
state, or 'periodicTx' if the Periodic state machine
for the Aggregation Port is in the PERIODIC_TX state.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 5 }
rlDot3adAggPortLacpSelected OBJECT-TYPE
SYNTAX INTEGER {
unselected(1),
selected(2),
waiting(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute holds the value 'unselected' if the Selected variable
for the Aggregation Port is set to UNSELECTED, 'selected' if the
Selected variable for the Aggregation Port is set to SELECTED,
or 'waiting' if the Selected variable for the Aggregation Port
is set to WAITING.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 6 }
rlDot3adAggPortLacpReady OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only Boolean value indicating whether the
Aggregation Port is in the WAITING state in the Mux state machine
and its wait_while_timer has expired ('TRUE').
otherwise, its valus is 'FALSE'."
::= { rlDot3adAggPortLacpEntry 7 }
rlDot3adAggPortLacpPortMoved OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only Boolean value indicating whether the
Partner_Oper_System or Partner_Oper_Port_Number in use by the
Aggregation Port has been changed in an incoming LACPDU ('TRUE').
otherwise, its valus is 'FALSE'."
::= { rlDot3adAggPortLacpEntry 8 }
rlDot3adAggPortLacpNNT OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A read-only Boolean value indicating whether there is a new protocol
information that should be transmitted on the link, or that the Partner
needs to be reminded of the old information.
otherwise, its valus is 'FALSE'."
::= { rlDot3adAggPortLacpEntry 9 }
rlDot3adAggPortLacpPeriodicTxTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time in seconds remaining before the Periodeic Tx timer
will expire.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 10 }
rlDot3adAggPortLacpCurrentWhileTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time in seconds remaining before the Current While timer
will expire.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 11 }
rlDot3adAggPortLacpWaitWhileTimer OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time in seconds remaining before the Wait While timer
will expire.
This value is read-only."
::= { rlDot3adAggPortLacpEntry 12 }
rlDot3adAggLacpMembershipRestrictionsSupport OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if there is support to
rlDot3adAggLacpMembershipRestrictionsTable."
::= { rlDot3adAgg 9 }
--
-- rlDot3adAggLacpMembershipRestrictionsTable
--
rlDot3adAggLacpMembershipRestrictionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RlDot3adAggLacpMembershipRestrictionsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of this table specifies membership restrictions
for ports that lacp is enbaled on them, and try to attach to
the corresponding dot3adAggIndex."
::= { rlDot3adAgg 10 }
rlDot3adAggLacpMembershipRestrictionsEntry OBJECT-TYPE
SYNTAX RlDot3adAggLacpMembershipRestrictionsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of information for each dot3adAggIndex."
INDEX { dot3adAggIndex }
::= { rlDot3adAggLacpMembershipRestrictionsTable 1 }
RlDot3adAggLacpMembershipRestrictionsEntry ::= SEQUENCE {
rlDot3adAggLacpMembershipRestrictionsPartnerAdminKey Unsigned32,
rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode Unsigned32,
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId PhysAddress,
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority Unsigned32,
rlDot3adAggLacpMembershipRestrictionsIndividualAggregator TruthValue
}
rlDot3adAggLacpMembershipRestrictionsPartnerAdminKey OBJECT-TYPE
SYNTAX Unsigned32 (0.. 65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies the administrative key
of the remote LACP aggregator.
A value of 0 is returned if the value of the variable
hasn't been set."
DEFVAL { 0 }
::= { rlDot3adAggLacpMembershipRestrictionsEntry 1 }
rlDot3adAggLacpMembershipRestrictionsSpeedAdminMode OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies the required speed of the LACP aggregator
in bits per second.
A value of 10 is returned for 10G.
A value of 0 is returned if the value of the variable
hasn't been set."
DEFVAL { 0 }
::= { rlDot3adAggLacpMembershipRestrictionsEntry 2 }
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemId OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies the administrative MAC Address
of the remote LACP aggregator.
A null mac address is returned if the value of the variable
hasn't been set."
::= { rlDot3adAggLacpMembershipRestrictionsEntry 3 }
rlDot3adAggLacpMembershipRestrictionsPartnerAdminSystemPriority OBJECT-TYPE
SYNTAX Unsigned32 (0.. 65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies the administrative System Priority
of the remote LACP aggregator.
A value of 0 is returned if the value of the variable
hasn't been set."
DEFVAL { 0 }
::= { rlDot3adAggLacpMembershipRestrictionsEntry 4 }
rlDot3adAggLacpMembershipRestrictionsIndividualAggregator OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable specifies if the lacp aggregator represents an
Aggregate ('FALSE') or an Individual link ('TRUE')."
DEFVAL { false }
::= { rlDot3adAggLacpMembershipRestrictionsEntry 5 }
END