mibs/MIBS/nokia/ALCATEL-IND1-E-SERVICE-MIB

1453 lines
56 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
ALCATEL-IND1-E-SERVICE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-IDENTITY,
OBJECT-TYPE,
Integer32, Counter64 FROM SNMPv2-SMI
OBJECT-GROUP,
MODULE-COMPLIANCE FROM SNMPv2-CONF
softentIND1eService FROM ALCATEL-IND1-BASE
RowStatus,
TEXTUAL-CONVENTION,
DisplayString,
MacAddress FROM SNMPv2-TC
InterfaceIndex FROM IF-MIB
;
alcatelIND1EServiceMIB MODULE-IDENTITY
LAST-UPDATED "201001200000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"The parameters for configuration of the E-Service feature.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2006 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201001200000Z"
DESCRIPTION
"Added notAssigned value for objects alaEServiceSapProfilePriorityMapMode
and alaEServiceSapProfileBandwidthShare."
REVISION "200912160000Z"
DESCRIPTION
"The below listed objects are made as read-create in 6.6.1.680.R01
Post GA.
alaEServiceUNIProfile8021xTreatment, alaEServiceUNIProfile8021ABTreatment,
alaEServiceUNIProfile8023adTreatment & alaEServiceUNIProfileAmapTreatment."
::= { softentIND1eService 1}
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- Textual Conventions
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
AlaEServiceUNIProfileProtocolTreatment ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The behavior of the bridge in regards to the given protocols packets received on
the UNI. Tunnel (1) enables the packets to be tunneled across the provider
network. Discard (2) causes the packets to be discarded and not enter
the provider network. Peer (3) means that on this port the bridge is to
participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
SYNTAX INTEGER
{
tunnel (1),
drop (2),
peer (3),
macTunnel (4)
}
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1eServiceMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For E-Service Managed Objects."
::= { alcatelIND1EServiceMIB 1 }
alcatelIND1EServiceMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For E-Service Conformance Information."
::= { alcatelIND1EServiceMIB 2 }
alcatelIND1EServiceMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For E-Service Units Of Conformance."
::= { alcatelIND1EServiceMIBConformance 1 }
alcatelIND1EServiceMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For E-Service Compliance Statements."
::= { alcatelIND1EServiceMIBConformance 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The E-Service Group
alaEService OBJECT IDENTIFIER ::= { alcatelIND1eServiceMIBObjects 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceInfo OBJECT IDENTIFIER ::= { alaEService 1 }
alaEServiceMode OBJECT-TYPE
SYNTAX INTEGER
{
legacyMode (1),
eServiceMode (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current mode configured for Vlan Stacking and Layer 2 tunnel configuration.
legacyMode (1) indicates that the commands from AlcatelIND1VLANStacking.mib are
to be used. eServiceMode (2) indicates the commands from this MIB are to be used."
DEFVAL { legacyMode }
::= { alaEServiceInfo 1 }
alaEServiceStatReset OBJECT-TYPE
SYNTAX INTEGER
{
default(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the global clear statistics control for ethernet-service
counters.
default(0) - default value for this object,
reset(1) - indicates that all ethernet-service counters should be
cleared."
DEFVAL { default }
::= { alaEServiceInfo 2 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The E-Service SAP Profile Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceSapProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaEServiceSapProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains service profiles containing performance and control attributes.
An entry in this table is created when a new service profile is defined."
::= { alaEService 2 }
alaEServiceSapProfileEntry OBJECT-TYPE
SYNTAX AlaEServiceSapProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A E-Service Service Profile entry."
INDEX { IMPLIED alaEServiceSapProfileID }
::= { alaEServiceSapProfileTable 1 }
AlaEServiceSapProfileEntry ::= SEQUENCE
{
alaEServiceSapProfileID DisplayString,
alaEServiceSapProfileCVLANTreatment INTEGER,
alaEServiceSapProfileReplacementCVLAN INTEGER,
alaEServiceSapProfilePriorityMapMode INTEGER,
alaEServiceSapProfileFixedPriority INTEGER,
alaEServiceSapProfileIngressBW Integer32,
alaEServiceSapProfileBandwidthShare INTEGER,
alaEServiceSapProfileRowStatus RowStatus,
alaEServiceSapProfileEgressBW Integer32,
alaEServiceSapProfileCIR Integer32,
alaEServiceSapProfileCBS Integer32,
alaEServiceSapProfilePIR Integer32,
alaEServiceSapProfilePBS Integer32
}
alaEServiceSapProfileID OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A label given to uniquely identify this profile. Must be at least one character long."
::= { alaEServiceSapProfileEntry 1 }
alaEServiceSapProfileCVLANTreatment OBJECT-TYPE
SYNTAX INTEGER
{
stackSVLAN (1),
translate (2),
changeCVLAN (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of VLAN stacking operation to be performed on a customer frame entering
this service. Stack Svlan (1) indicates that the SVLAN is to be pre-pended on the
frame before any existing 802.1Q tag. Translate (2) means to replace the existing
802.1Q tag with the SVLAN. Change CVLAN (3) indicates that the customer tag is to
remain on the frame but its value is to be changed to the supplied value."
DEFVAL { stackSVLAN }
::= { alaEServiceSapProfileEntry 2 }
alaEServiceSapProfileReplacementCVLAN OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The CVLAN ID to use when using the Change CVLAN treatment mode."
::= { alaEServiceSapProfileEntry 3 }
alaEServiceSapProfilePriorityMapMode OBJECT-TYPE
SYNTAX INTEGER
{
notAssigned(0),
mapInnerPtoOuterP (1),
mapInnerDscpToOuterP(2),
fixedP (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the source of the value for the priority field of the SVLAN
802.1Q tag when pre-pended to the customer data frame. If set to notAssigned(0), SAP
priority limit parameter will not be effective, QoS priority settings needs to be
configured. mapInnerPtoOuterP (1) uses the priority field of the incoming frame when
tagged to fill in the priority field of the SVLAN tag. mapInnerDscpToOuterP (2) uses
the frames priority bits in its IP DSCP field to fill in the priority field of the
SVLAN tag. FixedP (3) uses the supplied FixedPriorityValue to fill in the SVLAN tag
priority bits."
DEFVAL { fixedP }
::= { alaEServiceSapProfileEntry 4 }
alaEServiceSapProfileFixedPriority OBJECT-TYPE
SYNTAX INTEGER (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the value of the priority field of the 802.1Q SVLAN tag
pre-pended to customer data frames when the fixed priority mapping mode is selected."
DEFVAL { 0 }
::= { alaEServiceSapProfileEntry 5 }
alaEServiceSapProfileIngressBW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes this limit of ingress bandwidth for the traffic to which
this profile is applied. If 0, no bandwidth limit is applied. This number represents
traffic in units of 1,000,000 bits per second. Note that all CVLAN that belong to this
SAP will share this aggregated limit."
::= { alaEServiceSapProfileEntry 6 }
alaEServiceSapProfileBandwidthShare OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable(0),
shared (1),
notShared(2),
notAssigned(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the use of the bandwidth limit in how it is applied across
multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If set
to Shared (1), all the ports that are part of the SAP will use aggregated
bandwidth, sharing some part of the bandwidth limit. If set to notShared (2),
each port will use its own bandwidth meter for this SAP. This value is not used
if ingressBandwidth is 0. If set to notAssigned(3), SAP bandwidth limit parameter
will not be effective, QoS bandwith settings needs to be configured."
DEFVAL { shared }
::= { alaEServiceSapProfileEntry 7 }
alaEServiceSapProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry."
::= { alaEServiceSapProfileEntry 8 }
alaEServiceSapProfileEgressBW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes this limit of egress bandwidth for each UNI
of the SAP to which this profile is applied. If 0, no bandwidth limit
is applied. This number represents traffic in units of Megabits per
second. Note that all CVLAN that belong to this SAP will share this
aggregated limit."
DEFVAL { 0 }
::= { alaEServiceSapProfileEntry 9 }
alaEServiceSapProfileCIR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Committed Information Rate - bandwidth values in bits per second."
DEFVAL { 0 }
::= { alaEServiceSapProfileEntry 10 }
alaEServiceSapProfileCBS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Committed Burst Size - bucket size in byte."
DEFVAL { 0 }
::= { alaEServiceSapProfileEntry 11 }
alaEServiceSapProfilePIR OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Peak Information Rate - bandwidth values in bits per second."
DEFVAL { 0 }
::= { alaEServiceSapProfileEntry 12 }
alaEServiceSapProfilePBS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Peak Burst Size - bucket size in byte."
DEFVAL { 0 }
::= { alaEServiceSapProfileEntry 13 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The E-Service UNI Profile Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceUNIProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaEServiceUNIProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains service profiles containing performance and control attributes.
An entry in this table is created when a new service profile is defined."
::= { alaEService 3 }
alaEServiceUNIProfileEntry OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A E-Service Service Profile entry."
INDEX { IMPLIED alaEServiceUNIProfileID }
::= { alaEServiceUNIProfileTable 1 }
AlaEServiceUNIProfileEntry ::= SEQUENCE
{
alaEServiceUNIProfileID DisplayString,
alaEServiceUNIProfileStpBpduTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfile8021xTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfile8021ABTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfile8023adTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileGvrpTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileAmapTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileRowStatus RowStatus,
alaEServiceUNIProfileMvrpTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileTunnelMac MacAddress,
alaEServiceUNIProfileLacpMarkerTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileOamTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileCiscoPagpTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileCiscoUdldTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileCiscoCdpTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileCiscoVtpTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileCiscoDtpTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileCiscoPvstTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileCiscoVlanTreatment AlaEServiceUNIProfileProtocolTreatment,
alaEServiceUNIProfileCiscoUplinkTreatment AlaEServiceUNIProfileProtocolTreatment
}
alaEServiceUNIProfileID OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A label given to uniquely identify this profile. Must be at least one character long."
::= { alaEServiceUNIProfileEntry 1 }
alaEServiceUNIProfileStpBpduTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the spanning tree
protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
DEFVAL { tunnel }
::= { alaEServiceUNIProfileEntry 2 }
alaEServiceUNIProfile8021xTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
DEFVAL { drop }
::= { alaEServiceUNIProfileEntry 3 }
alaEServiceUNIProfile8021ABTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
DEFVAL { drop }
::= { alaEServiceUNIProfileEntry 4 }
alaEServiceUNIProfile8023adTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
DEFVAL { peer }
::= { alaEServiceUNIProfileEntry 5 }
alaEServiceUNIProfileGvrpTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the GVRP PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
DEFVAL { tunnel }
::= { alaEServiceUNIProfileEntry 6 }
alaEServiceUNIProfileAmapTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the Alcatel
propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currenly mac-tunnel is not supported"
DEFVAL { drop }
::= { alaEServiceUNIProfileEntry 7 }
alaEServiceUNIProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry."
::= { alaEServiceUNIProfileEntry 8 }
alaEServiceUNIProfileMvrpTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the MVRP PDU
frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across
the provider network. Discard (2) causes the PDU of the protocol to be discarded
and not enter the provider network. Peer (3) means that on this port the bridge
is to participate in the protocol. Currently peer is not supported for MVRP"
DEFVAL { tunnel }
::= { alaEServiceUNIProfileEntry 9 }
alaEServiceUNIProfileTunnelMac OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the tunnel mac used to tunnel L2 protocol to NNI ports"
::= { alaEServiceUNIProfileEntry 10 }
alaEServiceUNIProfileLacpMarkerTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the LACP MARKER PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
DEFVAL { peer }
::= { alaEServiceUNIProfileEntry 11 }
alaEServiceUNIProfileOamTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the OAM PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
DEFVAL { peer }
::= { alaEServiceUNIProfileEntry 12 }
alaEServiceUNIProfileCiscoPagpTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the PAGP PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currently peer is not supported"
DEFVAL { drop }
::= { alaEServiceUNIProfileEntry 13 }
alaEServiceUNIProfileCiscoUdldTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the UDLD PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling."
DEFVAL { drop }
::= { alaEServiceUNIProfileEntry 14 }
alaEServiceUNIProfileCiscoCdpTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the CDC PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currently peer is not supported"
DEFVAL { drop }
::= { alaEServiceUNIProfileEntry 15 }
alaEServiceUNIProfileCiscoVtpTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the VTP PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currently peer is not supported"
DEFVAL { drop }
::= { alaEServiceUNIProfileEntry 16 }
alaEServiceUNIProfileCiscoDtpTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the DTP PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currently peer not supported"
DEFVAL { drop }
::= { alaEServiceUNIProfileEntry 17 }
alaEServiceUNIProfileCiscoPvstTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the PVST PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currently peer not supported"
DEFVAL { drop }
::= { alaEServiceUNIProfileEntry 18 }
alaEServiceUNIProfileCiscoVlanTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the VLAN PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel (4) enables mac-tunnelling.
Currently peer not supported"
DEFVAL { drop }
::= { alaEServiceUNIProfileEntry 19 }
alaEServiceUNIProfileCiscoUplinkTreatment OBJECT-TYPE
SYNTAX AlaEServiceUNIProfileProtocolTreatment
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object describes the behavior of the bridge in regards to the UPLINK PDU
frames received on the UNI. Tunnel (1) enables the PDU to
be tunneled across the provider network. Discard (2) causes the PDU of the
protocol to be discarded and not enter the provider network. Peer (3) means
that on this port the bridge is to participate in the protocol. Mac-Tunnel(4) enables mac-tunnelling.
Currently peer not supported."
DEFVAL { drop }
::= { alaEServiceUNIProfileEntry 20 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The E-Service Service Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaEServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the services and their assigned SVLAN for the
E-Service feature."
::= { alaEService 4 }
alaEServiceEntry OBJECT-TYPE
SYNTAX AlaEServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The svlan/ipmvlan-port association."
INDEX { IMPLIED alaEServiceID }
::= { alaEServiceTable 1 }
AlaEServiceEntry ::= SEQUENCE
{
alaEServiceID DisplayString,
alaEServiceSVLAN INTEGER,
alaEServiceVlanType INTEGER,
alaEServiceRowStatus RowStatus,
alaEServiceStatGreenCount Counter64,
alaEServiceStatYellowCount Counter64,
alaEServiceStatRedCount Counter64
}
alaEServiceID OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A label given to uniquely identify this Service. Must be at least one character long."
::= { alaEServiceEntry 1 }
alaEServiceSVLAN OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The SVLAN number of the SVLAN chosen to the be transport for this service."
::= { alaEServiceEntry 2 }
alaEServiceVlanType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
svlan(1),
ipmvlan(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the vlan this service is going to attach to. When creating the service,
the type should match the vlanId specified in the request."
::= { alaEServiceEntry 3 }
alaEServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a service. When
creating or deleting the service, the user needs to provide both
the svlan and the vlantype objects."
::= { alaEServiceEntry 4 }
alaEServiceStatGreenCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM
and trTCM, packet is CIR/CBS compliant)."
::= { alaEServiceEntry 5 }
alaEServiceStatYellowCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM
and trTCM, packet is PIR/PBS compliant)."
::= { alaEServiceEntry 6 }
alaEServiceStatRedCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM
and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant)."
::= { alaEServiceEntry 7 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The E-Service SAP Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceSapTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaEServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the Service Access Points (Sap) listed by ID.
This table is used to create, delete, and modify the SAP's profile"
::= { alaEService 5 }
alaEServiceSapEntry OBJECT-TYPE
SYNTAX AlaEServiceSapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of SAP."
INDEX { alaEServiceSapID}
::= { alaEServiceSapTable 1 }
AlaEServiceSapEntry ::= SEQUENCE
{
alaEServiceSapID Integer32,
alaEServiceSapServiceID DisplayString,
alaEServiceSapProfile DisplayString,
alaEServiceSapRowStatus RowStatus
}
alaEServiceSapID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Number given to uniquely identify the SAP."
::= { alaEServiceSapEntry 1 }
alaEServiceSapServiceID OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A label given to uniquely identify the Service this SAP is for. Must
be at least one character long."
::= { alaEServiceSapEntry 2 }
alaEServiceSapProfile OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The string identifying the SAP Profile this sap is to use. If specified, must match an existing
SAP Profile."
::= { alaEServiceSapEntry 3 }
alaEServiceSapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a sap. When
creating the sap, the user needs to provide the service name in
the same set request."
::= { alaEServiceSapEntry 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The E-Service SAP CVLAN Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceSapCvlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaEServiceSapCvlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the Service Access Points (Sap) where the CVLANs are bound
to their service."
::= { alaEService 6 }
alaEServiceSapCvlanEntry OBJECT-TYPE
SYNTAX AlaEServiceSapCvlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CVLAN to Sap binding."
INDEX { alaEServiceSapCvlanSapID, alaEServiceSapCvlanCvlan }
::= { alaEServiceSapCvlanTable 1 }
AlaEServiceSapCvlanEntry ::= SEQUENCE
{
alaEServiceSapCvlanSapID Integer32,
alaEServiceSapCvlanCvlan INTEGER,
alaEServiceSapCvlanMapType INTEGER,
alaEServiceSapCvlanRowStatus RowStatus
}
alaEServiceSapCvlanSapID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Number given to uniquely identify this SAP."
::= { alaEServiceSapCvlanEntry 1 }
alaEServiceSapCvlanCvlan OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is the CVLAN ID that this binding is targeted at. The CVLAN ID
may be 0, which indicates an all or untagged only mapping type."
::= { alaEServiceSapCvlanEntry 2 }
alaEServiceSapCvlanMapType OBJECT-TYPE
SYNTAX INTEGER
{
single (1),
all(2),
untaggedOnly (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the mapping type that defines what CVLANs are mapped into this service.
Multiple mappings can be defined for CVLAN to service, however only one all (2) or
untaggedOnly (3) mapping entry can be created per UNI. A mapping type of Single (1)
denotes a specific CVLAN value to bind to the service. A mapping type of All (2)
denotes that all customer frames that do not map to any other SAP,
will be mapped into this service. A mapping type of Untagged (3) denotes that only
the untagged frames will be mapped into this service."
DEFVAL { single }
::= { alaEServiceSapCvlanEntry 3 }
alaEServiceSapCvlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a SAP."
::= { alaEServiceSapCvlanEntry 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The E-Service Port Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServicePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaEServicePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the ports used by the EService feature. Both UNI and NNI
are listed here."
::= { alaEService 7 }
alaEServicePortEntry OBJECT-TYPE
SYNTAX AlaEServicePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of ports being used by EService."
INDEX { alaEServicePortID}
::= { alaEServicePortTable 1 }
AlaEServicePortEntry ::= SEQUENCE
{
alaEServicePortID InterfaceIndex,
alaEServicePortType INTEGER,
alaEServicePortVendorTpid Integer32,
alaEServicePortLegacyStpBpdu INTEGER,
alaEServicePortLegacyGvrpPdu INTEGER,
alaEServicePortUniProfile DisplayString,
alaEServicePortTransBridging INTEGER,
alaEServicePortLegacyMvrpPdu INTEGER
}
alaEServicePortID OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IfIndex of this UNI or NNI Port."
::= { alaEServicePortEntry 1 }
alaEServicePortType OBJECT-TYPE
SYNTAX INTEGER
{
uni (1),
nni (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of port for Vlan Stacking operation. uni (1) represents a customer facing
port on which traffic may enter the E-Service. nni (2) respresents a provider network
port over which the E-Service may be connected."
DEFVAL { uni }
::= { alaEServicePortEntry 2 }
alaEServicePortVendorTpid OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"he TPID for this port if type is NNI. It is used for the incoming data
traffic parsing and it is substituted to the 802.1Q standard Tpid for
the outgoing data traffic. This is used for compatibility with other vendor
equipment. The default value is the standard value 0x8100."
DEFVAL { 33024 }
::= { alaEServicePortEntry 3 }
alaEServicePortLegacyStpBpdu OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (0),
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The legacy STP BPDU treatment for this port if NNI. It defines the type of processing
applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conventional/customer
BPDUs with MAC address 01:80:c2:00:00:00 and its processing on network ports can be
enabled/disabled by this object.By default the value is disabled i.e
provider MAC BPDU with MAC address 01:80:c2:00:00:08 would be processed at network ports."
DEFVAL { disable }
::= { alaEServicePortEntry 4 }
alaEServicePortLegacyGvrpPdu OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (0),
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The legacy GVRP PDU treatment for this port if NNI. It defines the type of processing
applied to GVRP PDUs on network ports. "
DEFVAL { disable }
::= { alaEServicePortEntry 5 }
alaEServicePortUniProfile OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The label of an existing UNI profile that which contains various properties to be
applied to this port if UNI."
::= { alaEServicePortEntry 6 }
alaEServicePortTransBridging OBJECT-TYPE
SYNTAX INTEGER
{
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Transparent Bridging status for the nni Port."
DEFVAL { disable }
::= { alaEServicePortEntry 7 }
alaEServicePortLegacyMvrpPdu OBJECT-TYPE
SYNTAX INTEGER
{
notApplicable (0),
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The legacy MVRP PDU treatment for this port if NNI. It defines the type of processing
applied to MVRP PDUs on network ports. "
DEFVAL { disable }
::= { alaEServicePortEntry 8 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The E-Service SAP-UNI Binding Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceSapUniTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaEServiceSapUniEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the UNI that are bound to each SAP for classifying
traffic into each EService. Not that writing to this table may create
a new UNI."
::= { alaEService 8 }
alaEServiceSapUniEntry OBJECT-TYPE
SYNTAX AlaEServiceSapUniEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of SAP-UNI bindings being used by EService."
INDEX { alaEServiceSapUniSap, alaEServiceSapUniUni}
::= { alaEServiceSapUniTable 1 }
AlaEServiceSapUniEntry ::= SEQUENCE
{
alaEServiceSapUniSap Integer32,
alaEServiceSapUniUni InterfaceIndex,
alaEServiceSapUniRowStatus RowStatus
}
alaEServiceSapUniSap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SAP ID that is configured onto this port."
::= { alaEServiceSapUniEntry 1 }
alaEServiceSapUniUni OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IfIndex of this UNI Port."
::= { alaEServiceSapUniEntry 2 }
alaEServiceSapUniRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a binding"
::= { alaEServiceSapUniEntry 3 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The E-Service NNI-SVLAN Binding Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceNniSvlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaEServiceNniSvlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the SVLANs bound to each NNI for use by the
EService feature."
::= { alaEService 9 }
alaEServiceNniSvlanEntry OBJECT-TYPE
SYNTAX AlaEServiceNniSvlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The list of NNI-SVLAN bindings being used by EService."
INDEX { alaEServiceNniSvlanNni, alaEServiceNniSvlanSvlan}
::= { alaEServiceNniSvlanTable 1 }
AlaEServiceNniSvlanEntry ::= SEQUENCE
{
alaEServiceNniSvlanNni InterfaceIndex,
alaEServiceNniSvlanSvlan INTEGER,
alaEServiceNniSvlanRowStatus RowStatus,
alaEServiceNniSvlanVpaType INTEGER
}
alaEServiceNniSvlanNni OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IfIndex of this NNI Port."
::= { alaEServiceNniSvlanEntry 1 }
alaEServiceNniSvlanSvlan OBJECT-TYPE
SYNTAX INTEGER (2..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The SVLAN bound to this port. SVLAN cannot be 1."
::= { alaEServiceNniSvlanEntry 2 }
alaEServiceNniSvlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this table entry. The supported value for set are
createAndGo (4) and destroy(6), to add or remove a binding"
::= { alaEServiceNniSvlanEntry 3 }
-- alaEServiceNniSvlanVpaType is added in 6.3.4.R01
alaEServiceNniSvlanVpaType OBJECT-TYPE
SYNTAX INTEGER {
stp (1),
erp (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The object is used to specify whether the VPA state is to
be controlled by an ERP or a STP. By default VPA state is
controlled by STP."
DEFVAL { stp }
::= { alaEServiceNniSvlanEntry 4 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- The E-Service srTCM and trTCM Counter Statistics Table
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceSapCvlanPortStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaEServiceSapCvlanPortStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A statistics table that contains the counters per SAP."
::= { alaEService 10 }
alaEServiceSapCvlanPortStatEntry OBJECT-TYPE
SYNTAX AlaEServiceSapCvlanPortStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A E-Service Statistics Entry."
INDEX { alaEServiceSapCvlanPortStatSapID,
alaEServiceSapCvlanPortStatCvlanID,
alaEServiceSapCvlanPortStatPortID }
::= { alaEServiceSapCvlanPortStatTable 1 }
AlaEServiceSapCvlanPortStatEntry ::= SEQUENCE
{
alaEServiceSapCvlanPortStatSapID Integer32,
alaEServiceSapCvlanPortStatCvlanID INTEGER,
alaEServiceSapCvlanPortStatPortID InterfaceIndex,
alaEServiceSapCvlanPortStatGreenCount Counter64,
alaEServiceSapCvlanPortStatYellowCount Counter64,
alaEServiceSapCvlanPortStatRedCount Counter64
}
alaEServiceSapCvlanPortStatSapID OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Number given to uniquely identify the SAP."
::= { alaEServiceSapCvlanPortStatEntry 1 }
alaEServiceSapCvlanPortStatCvlanID OBJECT-TYPE
SYNTAX INTEGER (0..4094)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object is the CVLAN ID that this binding is targeted at. The CVLAN ID
may be 0, which indicates an all or untagged only mapping type."
::= { alaEServiceSapCvlanPortStatEntry 2 }
alaEServiceSapCvlanPortStatPortID OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IfIndex of this UNI Port."
::= { alaEServiceSapCvlanPortStatEntry 3 }
alaEServiceSapCvlanPortStatGreenCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM
and trTCM, packet is CIR/CBS compliant) per UNI port, per CVLAN. This object is applicable
only when ingress bandwidth is not shared across SAP ports and CVLANs."
::= { alaEServiceSapCvlanPortStatEntry 4 }
alaEServiceSapCvlanPortStatYellowCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM
and trTCM, packet is PIR/PBS compliant) per UNI port, per CVLAN. This object is applicable
only when ingress bandwidth is not shared across SAP ports and CVLANs."
::= { alaEServiceSapCvlanPortStatEntry 5 }
alaEServiceSapCvlanPortStatRedCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM
and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant) per UNI port, per CVLAN.
This object is applicable only when ingress bandwidth is not shared across SAP
ports and CVLANs."
::= { alaEServiceSapCvlanPortStatEntry 6 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- COMPLIANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alcatelIND1EServiceMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for E-Service."
MODULE MANDATORY-GROUPS
{
alaEServiceSapProfileGroup,
alaEServiceUNIProfileGroup,
alaEServiceGroup,
alaEServiceSapGroup,
alaEServiceSapUniGroup,
alaEServiceSapCvlanGroup,
alaEServicePortGroup,
alaEServiceNniSvlanGroup,
alaEServiceSapCvlanPortStatGroup,
alaEServiceInfoGroup
}
::= { alcatelIND1EServiceMIBCompliances 1 }
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-- UNITS OF CONFORMANCE
-- xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
alaEServiceSapProfileGroup OBJECT-GROUP
OBJECTS
{
alaEServiceSapProfileCVLANTreatment,
alaEServiceSapProfileReplacementCVLAN,
alaEServiceSapProfilePriorityMapMode,
alaEServiceSapProfileFixedPriority,
alaEServiceSapProfileIngressBW,
alaEServiceSapProfileBandwidthShare,
alaEServiceSapProfileRowStatus,
alaEServiceSapProfileEgressBW,
alaEServiceSapProfileCIR,
alaEServiceSapProfileCBS,
alaEServiceSapProfilePIR,
alaEServiceSapProfilePBS
}
STATUS current
DESCRIPTION
"Collection of objects for management of E-Service Sap Profiles."
::= { alcatelIND1EServiceMIBGroups 1 }
alaEServiceUNIProfileGroup OBJECT-GROUP
OBJECTS
{
alaEServiceUNIProfileStpBpduTreatment,
alaEServiceUNIProfile8021xTreatment,
alaEServiceUNIProfile8021ABTreatment,
alaEServiceUNIProfile8023adTreatment,
alaEServiceUNIProfileGvrpTreatment,
alaEServiceUNIProfileAmapTreatment,
alaEServiceUNIProfileRowStatus,
alaEServiceUNIProfileMvrpTreatment,
alaEServiceUNIProfileTunnelMac,
alaEServiceUNIProfileLacpMarkerTreatment,
alaEServiceUNIProfileOamTreatment,
alaEServiceUNIProfileCiscoPagpTreatment,
alaEServiceUNIProfileCiscoUdldTreatment,
alaEServiceUNIProfileCiscoCdpTreatment,
alaEServiceUNIProfileCiscoVtpTreatment,
alaEServiceUNIProfileCiscoDtpTreatment,
alaEServiceUNIProfileCiscoPvstTreatment,
alaEServiceUNIProfileCiscoVlanTreatment,
alaEServiceUNIProfileCiscoUplinkTreatment
}
STATUS current
DESCRIPTION
"Collection of objects for management of EService UNI Profiles."
::= { alcatelIND1EServiceMIBGroups 2 }
alaEServiceGroup OBJECT-GROUP
OBJECTS
{
alaEServiceSVLAN,
alaEServiceVlanType,
alaEServiceRowStatus,
alaEServiceStatGreenCount,
alaEServiceStatYellowCount,
alaEServiceStatRedCount
}
STATUS current
DESCRIPTION
"Collection of objects for management of E-Services."
::= { alcatelIND1EServiceMIBGroups 3 }
alaEServiceSapGroup OBJECT-GROUP
OBJECTS
{
alaEServiceSapServiceID,
alaEServiceSapProfile,
alaEServiceSapRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of E-Service SAPs."
::= { alcatelIND1EServiceMIBGroups 4 }
alaEServiceSapCvlanGroup OBJECT-GROUP
OBJECTS
{
alaEServiceSapCvlanMapType,
alaEServiceSapCvlanRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of E-Service SAP CVLAN bindings."
::= { alcatelIND1EServiceMIBGroups 5 }
alaEServicePortGroup OBJECT-GROUP
OBJECTS
{
alaEServicePortType,
alaEServicePortVendorTpid,
alaEServicePortLegacyStpBpdu,
alaEServicePortLegacyGvrpPdu,
alaEServicePortUniProfile,
alaEServicePortTransBridging,
alaEServicePortLegacyMvrpPdu
}
STATUS current
DESCRIPTION
"Collection of objects for management of E-Service Ports."
::= { alcatelIND1EServiceMIBGroups 6 }
alaEServiceSapUniGroup OBJECT-GROUP
OBJECTS
{
alaEServiceSapUniRowStatus
}
STATUS current
DESCRIPTION
"Collection of objects for management of E-Service SAP to UNI
Binding."
::= { alcatelIND1EServiceMIBGroups 7 }
alaEServiceNniSvlanGroup OBJECT-GROUP
OBJECTS
{
alaEServiceNniSvlanRowStatus,
alaEServiceNniSvlanVpaType
}
STATUS current
DESCRIPTION
"Collection of objects for management of E-Service SVLAN to NNI
Binding."
::= { alcatelIND1EServiceMIBGroups 8 }
alaEServiceSapCvlanPortStatGroup OBJECT-GROUP
OBJECTS
{
alaEServiceSapCvlanPortStatGreenCount,
alaEServiceSapCvlanPortStatYellowCount,
alaEServiceSapCvlanPortStatRedCount
}
STATUS current
DESCRIPTION
"Collection of objects for srTCM and trTCM Counters."
::= { alcatelIND1EServiceMIBGroups 9 }
alaEServiceInfoGroup OBJECT-GROUP
OBJECTS
{
alaEServiceMode,
alaEServiceStatReset
}
STATUS current
DESCRIPTION
"Collection of E-Service Global Objects."
::= { alcatelIND1EServiceMIBGroups 10 }
END