mibs/MIBS/nokia/ALCATEL-IND1-ERP-MIB

776 lines
25 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
ALCATEL-IND1-ERP-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter32, Unsigned32, MODULE-IDENTITY, OBJECT-IDENTITY,
NOTIFICATION-TYPE, OBJECT-TYPE, TimeTicks, Integer32
FROM SNMPv2-SMI
InterfaceIndex FROM IF-MIB
VlanId FROM Q-BRIDGE-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
FROM SNMPv2-CONF
TimeStamp, RowStatus, TEXTUAL-CONVENTION, TruthValue
FROM SNMPv2-TC
softentIND1Erp FROM ALCATEL-IND1-BASE;
alcatelIND1ERPMIB MODULE-IDENTITY
LAST-UPDATED "200807100000Z" -- 07/10/2008 00:00 GMT
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to insure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
ERP Switching is protection switching mechanism for ETH Layer Ethernet Ring
topologies.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2008 Alcatel-Lucent, Incorporated
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "200807100000Z"
DESCRIPTION
"The ERP MIB defines a set of ERP related management objects for ports
that support Ethernet Ring Protection (ERP) Switching Protocol for ETH
Layer Ring Topologies. With this, rapid protection switching of 50ms can
be achieved.
This MIB comprises proprietary managed objects as well the objects required
for conforming to the protocol."
::= { softentIND1Erp 1}
-- This MIB contains the following groups
alcatelIND1ERPMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION
"Branch For ERP
Subsystem Managed Objects."
::= { alcatelIND1ERPMIB 1 }
alaErpNotifications OBJECT IDENTIFIER ::= { alcatelIND1ERPMIB 2 }
alcatelIND1ERPMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1ERPMIB 3 }
-- alcatelIND1ERPMIBObjects contains following groups
alaErpGlobal OBJECT IDENTIFIER ::= {alcatelIND1ERPMIBObjects 1}
alaErpRingAttributes OBJECT IDENTIFIER ::= {alcatelIND1ERPMIBObjects 2}
-- ******************************************************************
-- Textual conventions
-- ******************************************************************
AlaErpRingPortStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the status of the Ring Port.
forwarding(1) Status is forwarding.
blocking(2) Status is blocking."
SYNTAX INTEGER
{
forwarding (1),
blocking (2)
}
AlaErpRingPortType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the type of the Ring Port.
nonRpl(1) Port is Non-RPL Port.
rpl(2) Port is RPL Port. Node is RPL Owner for the Ring."
SYNTAX INTEGER
{
nonRpl (1),
rpl (2)
}
AlaErpRingMepId ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Maintenance association End Point Identifier (MEPID): A small
integer, unique over a given Maintenance Association,
identifying a specific MEP."
REFERENCE
"802.1ag clauses 3.18 and 19.2.1"
SYNTAX Unsigned32 (1..8191)
AlaErpRingMEGLevel ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"MEG level of the R-APS PDU to be inserted."
SYNTAX Unsigned32 (0..7)
-- ******************************************************************
-- ERP Global Variables
-- ******************************************************************
alaErpClearStats OBJECT-TYPE
SYNTAX INTEGER
{
default(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the global clear statistics control for ERP.
The value reset (1) indicates that ERP should clear all
statistics related to all the rings in the system.
By default, this object contains a zero value."
DEFVAL { default }
::= { alaErpGlobal 1 }
-- ******************************************************************
-- ERP Ring Table
-- ******************************************************************
alaErpRingTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaErpRingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one ERP Ring table per bridge. It permits
the configuration of Ring."
::= { alaErpRingAttributes 1 }
alaErpRingEntry OBJECT-TYPE
SYNTAX AlaErpRingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ERP Ring table entry."
INDEX { alaErpRingId }
::= { alaErpRingTable 1 }
AlaErpRingEntry ::= SEQUENCE {
alaErpRingId INTEGER,
alaErpRingServiceVid VlanId,
alaErpRingMEGLevel AlaErpRingMEGLevel,
alaErpRingPort1 InterfaceIndex,
alaErpRingPort2 InterfaceIndex,
alaErpRingStatus INTEGER,
alaErpRingState INTEGER,
alaErpRingWaitToRestoreTimer Unsigned32,
alaErpRingGuardTimer Integer32,
alaErpRingClearStats INTEGER,
alaErpRingLastStateChange TimeStamp,
alaErpRingTimeToRevert TimeTicks,
alaErpRingRowStatus RowStatus
}
alaErpRingId OBJECT-TYPE
SYNTAX INTEGER (1 .. 2147483647)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"Ring identifier that is unique in the bridge."
::= { alaErpRingEntry 1 }
alaErpRingServiceVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An integer indicating the VID of Service VLAN. All the ERP
control traffic will flow with Service VLAN tag across the
ring. This object must be specified while creating a row in
this table. Once the row has been created, the value of
this object cannot be changed."
::= { alaErpRingEntry 2 }
alaErpRingMEGLevel OBJECT-TYPE
SYNTAX AlaErpRingMEGLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MEG level of the R-APS PDU to be inserted for this Ring.
This object must be specified while creating a row in
this table. Once the row has been created, the value of
this object cannot be changed."
::= { alaErpRingEntry 3 }
alaErpRingPort1 OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the interface index of the ring port,which is
either a bridge port, or an aggregated link within a bridge,
on which ring is configured.
There can be only two ring ports per ring in a bridge.
This object must be specified while creating a row in
this table. Once the row has been created, the value of
this object cannot be changed."
::= { alaErpRingEntry 4 }
alaErpRingPort2 OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the interface index of the ring port,which is
either a bridge port, or an aggregated link within a bridge,
on which ring is configured.
There can be only two ring ports per ring in a bridge.
This object must be specified while creating a row in
this table. Once the row has been created, the value of
this object cannot be changed."
::= { alaErpRingEntry 5 }
alaErpRingStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An Integer value indicating the administrative state of the Ring.
enabled indicates that the Ring is to function normally, and
disabled that it is to cease functioning."
DEFVAL { disabled }
::= { alaErpRingEntry 6 }
alaErpRingState OBJECT-TYPE
SYNTAX INTEGER
{
idle (0),
protection (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current state of the Ring."
::= { alaErpRingEntry 7 }
alaErpRingWaitToRestoreTimer OBJECT-TYPE
SYNTAX Unsigned32 ( 0 .. 12)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is valid only for RPL Node.
This timer is started to prevent frequent operation switch due
to an intermittent defect.
It may be configured by the operator in 1 minute steps between
0 and 12 minutes."
DEFVAL { 5 }
::= { alaErpRingEntry 8 }
alaErpRingGuardTimer OBJECT-TYPE
SYNTAX Integer32 ( 1 .. 200)
UNITS "10 milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines the guard timer value in centiseconds.
This timer is started to prevent the ring nodes from receiving
outdated R-APS messages.
It may be configured by the operator in 10 ms steps between
10 ms to 2 seconds."
DEFVAL { 50 }
::= { alaErpRingEntry 9 }
alaErpRingClearStats OBJECT-TYPE
SYNTAX INTEGER
{
default(0),
reset(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Defines per ring clear statistics control for ERP.
The value reset (1) indicates that ERP should clear all
statistics related to a ring in the system.By default,
this object contains a zero value."
DEFVAL { default }
::= { alaErpRingEntry 10 }
alaErpRingLastStateChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (SysUpTime) at which the ethernet ring last
entered either the IDLE or PROTECTION state."
::= { alaErpRingEntry 11 }
alaErpRingTimeToRevert OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines the time left to revert from Protection State to Idle State."
::= {alaErpRingEntry 12}
alaErpRingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated."
::= { alaErpRingEntry 13 }
-- ******************************************************************
-- The ERP RING Port Table
-- ******************************************************************
alaErpRingPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaErpRingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one ERP Ring Port table per bridge. It permits
the configuration of Ring Ports."
::= { alaErpRingAttributes 2 }
alaErpRingPortEntry OBJECT-TYPE
SYNTAX AlaErpRingPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ERP Ring Port table entry."
INDEX { alaErpRingId, alaErpRingPortIfIndex }
::= { alaErpRingPortTable 1 }
AlaErpRingPortEntry ::= SEQUENCE {
alaErpRingPortIfIndex InterfaceIndex,
alaErpRingPortStatus AlaErpRingPortStatus,
alaErpRingPortType AlaErpRingPortType,
alaErpRingPortEthOAMEvent TruthValue,
alaErpRingPortClearStats INTEGER,
alaErpRingPortRmepId AlaErpRingMepId
}
alaErpRingPortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object is the interface index of the interface either a
bridge port, or an aggregated link within a bridge port, to
which ring port is configured.
There can be only two ring ports per ring in a bridge."
::= { alaErpRingPortEntry 1 }
alaErpRingPortStatus OBJECT-TYPE
SYNTAX AlaErpRingPortStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Status of the Ring Port."
DEFVAL { blocking }
::= { alaErpRingPortEntry 2 }
alaErpRingPortType OBJECT-TYPE
SYNTAX AlaErpRingPortType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of the Ring Port.
To configure a node as a RPL owner for the ring, this object
has value of RPL(2)."
DEFVAL { nonRpl }
::= { alaErpRingPortEntry 3 }
alaErpRingPortEthOAMEvent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A Boolean indicating whether ERP Ring Port shall take loss of
connectivity event from Ethernet OAM.
True indicates that the Ring Port is to take events from
Ethernet OAM."
DEFVAL { false }
::= { alaErpRingPortEntry 4 }
alaErpRingPortClearStats OBJECT-TYPE
SYNTAX INTEGER
{
default(0),
reset(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines per ring port clear statistics control for ERP.
The value reset (1) indicates that ERP should clear all
statistics related to a ring port in the system.By default,
this object contains a zero value."
DEFVAL { default }
::= { alaErpRingPortEntry 5 }
alaErpRingPortRmepId OBJECT-TYPE
SYNTAX AlaErpRingMepId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifier of Remote Endpoint."
::= { alaErpRingPortEntry 6 }
-- ******************************************************************
-- The ERP VLAN Table
-- ******************************************************************
alaErpRingVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaErpRingVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table defines the association of VIDs and RingIds.
The writable objects in this table need to be persistent
upon reboot or restart of a device."
::= { alaErpRingAttributes 3 }
alaErpRingVlanEntry OBJECT-TYPE
SYNTAX AlaErpRingVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VLAN table entry."
INDEX { alaErpRingId, alaErpRingVlanProtectedVid }
::= { alaErpRingVlanTable 1 }
AlaErpRingVlanEntry ::= SEQUENCE {
alaErpRingVlanProtectedVid VlanId,
alaErpRingVlanRowStatus RowStatus
}
alaErpRingVlanProtectedVid OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An integer indicating the VID of Protected VLAN."
::= { alaErpRingVlanEntry 1 }
alaErpRingVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated."
::= { alaErpRingVlanEntry 2 }
-- ******************************************************************
-- The ERP Statistics Table
-- ******************************************************************
alaErpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaErpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one ERP Stats table per bridge. This table
contains the statistics for the ERP on per Ring basis."
::= { alaErpRingAttributes 4 }
alaErpStatsEntry OBJECT-TYPE
SYNTAX AlaErpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Statistics table entry."
AUGMENTS { alaErpRingPortEntry }
::= { alaErpStatsTable 1 }
AlaErpStatsEntry ::= SEQUENCE {
alaErpStatsSignalFailPduTx Counter32,
alaErpStatsSignalFailPduRx Counter32,
alaErpStatsSignalFailPduDrop Counter32,
alaErpStatsNoRequestPduTx Counter32,
alaErpStatsNoRequestPduRx Counter32,
alaErpStatsNoRequestPduDrop Counter32,
alaErpStatsRPLBlockPDUTx Counter32,
alaErpStatsRPLBlockPDURx Counter32,
alaErpStatsRPLBlockPDUDrop Counter32,
alaErpStatsPDUErr Counter32
}
alaErpStatsSignalFailPduTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of R-APS (SF) PDUs transmitted on this
interface for this Ring."
::= { alaErpStatsEntry 1 }
alaErpStatsSignalFailPduRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of valid R-APS (SF) PDUs received on this
interface for this Ring."
::= { alaErpStatsEntry 2 }
alaErpStatsSignalFailPduDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of valid R-APS (SF) PDUs dropped."
::= { alaErpStatsEntry 3 }
alaErpStatsNoRequestPduTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of R-APS (NR) PDUs transmitted on this
interface for this Ring."
::= { alaErpStatsEntry 4 }
alaErpStatsNoRequestPduRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of valid R-APS (NR) PDUs received on this
interface for this Ring."
::= { alaErpStatsEntry 5 }
alaErpStatsNoRequestPduDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of valid R-APS (NR) PDUs dropped."
::= { alaErpStatsEntry 6 }
alaErpStatsRPLBlockPDUTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of R-APS (NR, RB) PDUs transmitted on this
interface for this Ring."
::= { alaErpStatsEntry 7 }
alaErpStatsRPLBlockPDURx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of valid R-APS (NR, RB) PDUs received on this
interface for this Ring."
::= { alaErpStatsEntry 8 }
alaErpStatsRPLBlockPDUDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of valid R-APS (NR, RB) PDUs dropped."
::= { alaErpStatsEntry 9 }
alaErpStatsPDUErr OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of error R-APS PDUs received."
::= { alaErpStatsEntry 10 }
-- ******************************************************************
-- NOTIFICATIONS (TRAPS)
-- ******************************************************************
alaErpNotificationsRoot OBJECT IDENTIFIER ::= { alaErpNotifications 0 }
alaErpRingStateChanged NOTIFICATION-TYPE
OBJECTS {
alaErpRingId,
alaErpRingState
}
STATUS current
DESCRIPTION
"The ERP Ring State has changed to Protection from Idle. Notify the user by
raising the Trap. "
::= { alaErpNotificationsRoot 1 }
alaErpRingMultipleRpl NOTIFICATION-TYPE
OBJECTS {
alaErpRingId
}
STATUS current
DESCRIPTION
"The trap shall be raised on RPL if there are multiple RPLs detected in the
ring. When the RPL node receives the NR (RB) message, this trap is raised."
::= { alaErpNotificationsRoot 2}
alaErpRingRemoved NOTIFICATION-TYPE
OBJECTS {
alaErpRingId
}
STATUS current
DESCRIPTION
"The trap shall be raised whenever the ring is removed dynamically in
Unlike NI Scenario only."
::= { alaErpNotificationsRoot 3 }
alaErpRingPortStatusChanged NOTIFICATION-TYPE
OBJECTS {
alaErpRingId,
alaErpRingPortIfIndex,
alaErpRingPortStatus
}
STATUS current
DESCRIPTION
"The trap shall be raised whenever the ring port status is changed."
::= { alaErpNotificationsRoot 4 }
-- ******************************************************************
-- CONFORMANCE
-- ******************************************************************
alcatelIND1ERPMIBCompliances OBJECT IDENTIFIER ::= { alcatelIND1ERPMIBConformance 1 }
alcatelIND1ERPMIBGroups OBJECT IDENTIFIER ::= { alcatelIND1ERPMIBConformance 2 }
-- ******************************************************************
-- ******************************************************************
-- COMPLIANCE
-- ******************************************************************
alcatelIND1ERPMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Compliance statement for ERP."
MODULE
MANDATORY-GROUPS
{
alaErpGlobalGroup,
alaErpRingAttributesGroup,
alaErpNotificationGroup
}
::= { alcatelIND1ERPMIBCompliances 1 }
-- ******************************************************************
-- MIB Grouping
-- ******************************************************************
alaErpGlobalGroup OBJECT-GROUP
OBJECTS
{
alaErpClearStats
}
STATUS current
DESCRIPTION
"Objects for the Global Group."
::={alcatelIND1ERPMIBGroups 1 }
alaErpRingAttributesGroup OBJECT-GROUP
OBJECTS
{
alaErpRingServiceVid,
alaErpRingMEGLevel,
alaErpRingPort1,
alaErpRingPort2,
alaErpRingStatus,
alaErpRingState,
alaErpRingWaitToRestoreTimer,
alaErpRingGuardTimer,
alaErpRingClearStats,
alaErpRingLastStateChange,
alaErpRingTimeToRevert,
alaErpRingRowStatus,
alaErpRingPortStatus,
alaErpRingPortType,
alaErpRingPortEthOAMEvent,
alaErpRingPortClearStats,
alaErpRingPortRmepId,
alaErpRingVlanRowStatus,
alaErpStatsSignalFailPduTx,
alaErpStatsSignalFailPduRx,
alaErpStatsSignalFailPduDrop,
alaErpStatsNoRequestPduTx,
alaErpStatsNoRequestPduRx,
alaErpStatsNoRequestPduDrop,
alaErpStatsRPLBlockPDUTx,
alaErpStatsRPLBlockPDURx,
alaErpStatsRPLBlockPDUDrop,
alaErpStatsPDUErr
}
STATUS current
DESCRIPTION
"Objects for the Ring Group."
::={alcatelIND1ERPMIBGroups 2 }
alaErpNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS
{
alaErpRingStateChanged,
alaErpRingMultipleRpl,
alaErpRingRemoved,
alaErpRingPortStatusChanged
}
STATUS current
DESCRIPTION
"Collection of notifications for ERP."
::= { alcatelIND1ERPMIBGroups 3 }
END