mibs/MIBS/nokia/ASAM-ALARM-MIB

3136 lines
115 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
ASAM-ALARM-MIB DEFINITIONS ::= BEGIN
-- ===========================================================================
-- This specification is published by Alcatel-Lucent under Non-Disclosure
-- Agreement(s) (NDA) with specific parties and has to be considered as
-- Confidential Information as defined in such NDA.
-- Alcatel-Lucent reserves the right to revise this document for any reason,
-- including but not limited to conformity with standards promulgated by
-- various agencies, utilisation of advances in the state of the technical
-- areas, or the reflection of changes in the design of any equipment,
-- techniques, or procedures described or referred to herein.
-- The product specifications and other technical or performance information
-- contained herein are subject to change without notice.
-- Updates of this document will be issued under the above NDA's.
-- Alcatel-Lucent makes no representation or warranty, expressed or implied,
-- with respect to the sufficiency, accuracy, or utility of any information
-- or opinion contained herein. Alcatel-Lucent expressly advises that any use
-- of for any purpose or reliance upon this technical reference is at the
-- risk of the user and that Alcatel-Lucent shall not be liable for any
-- damage or injury incurred by any person arising out of the sufficiency,
-- accuracy, or utility of any information or opinion contained herein.
-- This document is not to be construed as a suggestion to any manufacturer
-- to modify or change any of its products, nor does this document represent
-- any commitment by Alcatel-Lucent to sell or purchase any product.
-- Nothing contained herein shall be construed as conferring by implication,
-- estoppel, or otherwise any license or right under any patent, whether or
-- not the use of any information herein necessarily employs an invention of
-- any existing or later issued patent.
-- Alcatel-Lucent reserves the right not to offer any or all of these
-- products and to withdraw any or all of them at any future time.
-- Copyright (C) 2004 Alcatel-Lucent. All Rights Reserved.
-- ===========================================================================
-- MODULE IDENTITY
-- LAST-UPDATED "201304241200Z"
-- ORGANIZATION "Alcatel-Lucent"
-- CONTACT-INFO "email:asam.mibsupport@alcatel-lucent.com"
-- DESCRIPTION
-- "The ASAM Alarm MIB allows to manage the Alarm Management application
-- in the ASAM. This is a centralized application for alarm reporting
-- and alarm logging."
--
-- REVISION "201304241200Z"
-- DESCRIPTION
-- "Version: 3EC15363AAAA_V4.6.0.1.1
-- Editor: Karel Meijfroidt
-- Changes:
-- * Remove Object 'asamAlarmProcMode' from 'asamAlarmEntry'
-- * Add new value 'ignore' to AsamAlarmSeverityType. This new value is
-- only to be used in the asamAlarmTable.
--
-- REVISION "201303081200Z"
-- DESCRIPTION
-- "Version: 3EC15363AAAA_V4.6.0.1.0
-- Editor: Yao Liqiang
-- Changes:
-- *Object 'asamAlarmProcMode' is added to 'asamAlarmEntry'.
--
-- REVISION "200121021200Z"
-- DESCRIPTION
-- "Version: 3EC15363AAAA_V4.4.0.1.1
-- Editor: Sridevi Dwaraganath
-- Changes:
-- * New scalar objects asamAlarmReportId, asamAlarmReportAlarmState,
-- asamAlarmReportSeverity, asamAlarmReportIndex1, asamAlarmReportIndex2,
-- asamAlarmReportTime, asamAlarmReportAddInfo are added aspart of
-- FR ALU01823984.
-- REVISION "201102170000Z"
-- DESCRIPTION
-- "Version: 3EC15363EAAA_V3.3.0.2.3
-- Editor: Karel Meijfroidt
-- Changes:
-- * Updated description of the delta alarm log buf sizes to note
-- that although the MIB objects are read-write, the values can
-- not be updated.
--
-- REVISION "200704031200Z"
-- DESCRIPTION
-- "Version: 3EC15363EAAA_V3.3.0.2.0
-- Editor: Apeksha Kawri
-- Changes:
-- * object 'asamAlarmLogBasicAlarmId' is added to 'asamAlarmLogEntry'.
-- * object 'asamAlarmSeverityDeltaLogBasicAlarmId' is added to
-- 'asamAlarmSeverityDeltaLogEntry'.
--
--
-- REVISION "200611131200Z"
-- DESCRIPTION
-- "Version: 3EC15363EAAA_V3.3.0.1.0
-- Editor: Katrien SCHARRE
-- Changes:
-- * Add new object in AsamAlarmEntry object definition. "
--
-- REVISION "200601231200Z"
-- DESCRIPTION
-- "Version: 3FE21961EAAA_E2.4.0.6
-- Editor: Bart Bogaert
-- Changes:
-- * Implemented BDFhw70643: strict syntax checks (smilint)"
--
-- REVISION "200512191200Z"
-- DESCRIPTION
-- "Version: 3EC15363EAAA_E2.0.0.0.0
-- Editor: Pradeep Hosaritthi
-- Changes:
-- * Added Alarm Filters MIB objects to support temporal and spatial
-- alarm filtering"
--
-- REVISION "200401291200Z"
-- DESCRIPTION
-- "Version: 3EC15363EAAA_E1.0.0.0
-- Editor: Rafael Van Driessche
-- Changes:
-- * type AsamAlarmType is no longer enumerated to avoid that the
-- MIB must change each time a new alarm type must be introduced."
--
-- REVISION "200304281200Z"
-- DESCRIPTION
-- "Version: 3EC15363AAAA_E5.0.1.1
-- Editor: Koen Van de Weyer
-- Changes:
-- * attribute 'alarmType' extended with infraStructure (36) (BDFaa50353)."
--
-- REVISION "200302121200Z"
-- DESCRIPTION
-- "Version 3EC15363AAAA_E5.0.1.0
-- Editor: Gert Steutelings
-- Changes:
-- * support of the uas(37) alarm type; this alarm type contains a generic
-- set of server alarms defined for servers based on the UAS concept."
--
-- REVISION "200208141200Z"
-- DESCRIPTION
-- "Version: 3EC15363AAAA_E5.0.0.1
-- Editor: Gert Steutelings
-- Changes:
-- * attribute 'asamAlarmChangeOccurredTrapEnable' made obsolete
-- (BDFaa44804)."
--
-- REVISION "200112191200Z"
-- DESCRIPTION
-- "Version: 3EC15363AAAA_E5.0.0.0
-- Editor: Gert Steutelings
-- First version produced for ASAM R5.0 based on ALARM_MIB of ASAM R4.3.
-- Changes:
-- * attributes 'asamAlarmOnThreshold', 'asamAlarmOffThreshold',
-- 'asamAlarmOnTimebase', and 'asamAlarmOffTimebase' have been made
-- obsolete;
-- * attributes 'asamCurrentAlarmPtr', 'asamAlarmLogPtr',
-- 'asamAlarmSnapshotPtr', and 'asamAlarm<severity>DeltaLogPtr' have
-- been made obsolete;
-- * introduction of new attributes 'asamCurrentAlarmAddInfo',
-- 'asamAlarmLogAddInfo', 'asamAlarmSnapshot AddInfo', and
-- 'asamAlarm<severity>DeltaLogAddInfo'."
--
-- REVISION "201504201200Z"
-- DESCRIPTION
-- "Version: 3EC15363AAAA_E5.3.0.0
-- Editor: Cheng Liangming
-- Changes:
-- * introduction of new table 'asamAlarmQueryTable'
-- =========================================================================
IMPORTS OBJECT-TYPE FROM RFC-1212
Counter, Gauge, TimeTicks FROM RFC1155-SMI
DisplayString FROM SNMPv2-TC
asam FROM SYSTEM-MIB
NetworkTimeInSeconds FROM ASAM-TC-MIB;
AsamAlarmCategoryType ::= INTEGER {
communications(1),
qualityofService(2),
processingError(3),
equipment(4),
environmental(5)
}
AsamAlarmSeverityType ::= INTEGER {
alllevel(0), -- all levels defined in asamAlarmQueryTable
indeterminate(1), -- not a definite known severity level
warning(2), -- just to inform as a warning
minor(3), -- not service affecting
major(4), -- service affecting
critical(5), -- service breaking
ignore(6) -- ignore alarm completely
}
AsamAlarmServAffType ::= INTEGER {
allAffecting(0), -- all affecting defined in asamAlarmQueryTable
serviceAffecting(1), -- Service Affecting
notServiceAffecting(2) -- Not Service Affecting
}
AsamAlarmModeType ::= INTEGER {
enabled(1),
disabled(2)
}
AsamAlarmStateType ::= INTEGER {
active(1), -- alarm is activated
nonActive(2) -- alarm is not active
}
AsamAlarmType ::= INTEGER (1..65535)
AsamAlarmLocation ::= INTEGER {
nearend(0),
farend(1),
middleend(2),
line(3),
nullend(4)
}
AsamAlarmDirection ::= INTEGER {
received(0),
transmit(1),
null(2)
}
-- The allowed values for AsamAlarmType are documented in the Alarm
-- Definition document. Which version of this document is applicable
-- for a given release can be found in the documentation plan.
AsamAlarmLogResetType ::= INTEGER {
resetCompleted(1), -- the log was reset
reset(2) -- value to set to reset the log
}
AsamAlarmLogFullActionType ::= INTEGER {
wrap(1), -- wrap around when log is full
halt(2) -- halt logging when log is full
}
AsamAlarmLogOverflowType ::= INTEGER {
notoverflowed(1), -- log is not overflowed
overflowed(2) -- log is overflowed
}
RowConfigState ::= INTEGER {
staticAllInitialValues(1), -- static row with all initial values
staticOperatorModified(2), -- static row but operator modified
operatorCreated(3) } -- row created by the operator
-- This textual convention is introduced to indicate whether a row is
-- system created or not and if system created whether all columns in
-- the row contain values which are equal to the initial values.
asamAlarmMIB OBJECT IDENTIFIER ::= {asam 3}
--
-- asamAlarmTable
--
asamAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamAlarmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines all the possible alarms at the agent.
For each alarm, there is an entry. Each entry consists of an index
for the table, alarm id, alarm category, alarm On/Off thresholds
and timebases and an alarm logging mode. The severity, reporting
and logging are manageable objects for the SNMP Manager.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= {asamAlarmMIB 1}
asamAlarmEntry OBJECT-TYPE
SYNTAX AsamAlarmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for alarm table.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { asamAlarmId }
::= {asamAlarmTable 1}
AsamAlarmEntry ::= SEQUENCE {
asamAlarmId INTEGER (0..4294967295),
asamAlarmCategory AsamAlarmCategoryType,
asamAlarmSeverity AsamAlarmSeverityType,
asamAlarmServAffect AsamAlarmServAffType,
asamAlarmOnThreshold INTEGER (0..4294967295),
asamAlarmOffThreshold INTEGER (0..4294967295),
asamAlarmOnTimebase TimeTicks,
asamAlarmOffTimebase TimeTicks,
asamAlarmRepMode AsamAlarmModeType,
asamAlarmLogMode AsamAlarmModeType,
asamAlarmEntryConfigState RowConfigState
}
asamAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the unique id for an alarm. It is a combination of 2
distinct parts of information : the alarm type and the alarm number.
The first half represents the type and the second (most right) part
the alarm number. This alarm number represents the bit position of
an alarm in a bitmap of an active alarm entry. Thus the value of
asamAlarmId can be found using a simple formula: (AlarmType x 2^16)
+ AlarmNumber. E.g. an alarm with alarm type 5 and alarm number 3
is represented as 0x00050003.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmEntry 1}
asamAlarmCategory OBJECT-TYPE
SYNTAX AsamAlarmCategoryType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines the category of an alarm. Alarm categories
are defined in X.733 as Communications, QualityOfService,
Processing Error, Equipment and Environmental.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmEntry 2}
asamAlarmSeverity OBJECT-TYPE
SYNTAX AsamAlarmSeverityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is defined to assign a severity level to an alarm.
This object may be indeterminate, warning, minor, major, critical
and ignore. In case of severity ignore, the alarm is ignored by
the system and all internal resources occupied by these alarms are
being freed.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1-6
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmEntry 3}
asamAlarmServAffect OBJECT-TYPE
SYNTAX AsamAlarmServAffType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object defines whether an alarm is service affecting or not.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmEntry 4}
asamAlarmOnThreshold OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object defines the threshold value for an alarm to be ON."
::= {asamAlarmEntry 5}
asamAlarmOffThreshold OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object defines the threshold value for an alarm to be OFF."
::= {asamAlarmEntry 6}
asamAlarmOnTimebase OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object defines the number of miliseconds that the alarm
should be persistant ON before it is reported ON."
::= {asamAlarmEntry 7}
asamAlarmOffTimebase OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object defines the number of miliseconds that the alarm
should be persistant OFF before it is reported OFF."
::= {asamAlarmEntry 8}
asamAlarmRepMode OBJECT-TYPE
SYNTAX AsamAlarmModeType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is defined to manage the reporting of the alarm.
If it is disabled, the alarm is not reported to the SNMP Manager.
If it is enabled, reporting to the manager is possible (provided
it has a high enough severity).
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmEntry 9}
asamAlarmLogMode OBJECT-TYPE
SYNTAX AsamAlarmModeType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is to manage the logging of the alarm. If this object
is disabled, the alarm is not logged. If it is enabled, an alarm is
logged in the AlarmLoggingTable if it has a high enough severity.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmEntry 10}
asamAlarmEntryConfigState OBJECT-TYPE
SYNTAX RowConfigState
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object represents the status of configured values of the entry.
It indicates whether a system created row contains all system init
values (staticAllInitialValues(1)) or
whether the values are already modified by an
operator (staticOperatorModified(2)).
This object can be used to decide to suppress the row when its value
equals staticAllInitialValues(1).
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: NA
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmEntry 11}
asamAlarmChangeOccurredTrapEnable OBJECT-TYPE
SYNTAX AsamAlarmModeType
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This object defines whether an internal trap should be sent to the
Trap MIB when a alarm changed that has a severity equal or higher
than the configured trap severity."
::= {asamAlarmMIB 2}
--
-- CurrentAlarmTable and related objects.
--
asamNumberofAlarmChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the number of changes that have occurred at
the CurrentAlarmtable since startup. It is a wrap around counter
between 0 and MAX.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 3}
asamNumberofAlarmEntries OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the number of entries in the Current Alarm Table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 4}
asamCurrentAlarmSeverityStatus OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicating all active severities in the current alarm
table (equal or higher than the configured severity level). They are
represented as a bitmap with the following bitpositions:
1 NoDefect
2 Indeterminate
4 Warning
8 Minor
16 Major
32 Critical
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 5}
--
-- Object 'asamCurrentAlarmSeverityLevel' removed.
--
asamCurrentAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamCurrentAlarmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the currently active alarms, ordered by severity
(highest first). Each entry contains information on the alarm type,
alarm status, two indexes and the last time that the entry was
changed. Only alarms with a reporting mode set to ON and a severity
equal or higher than the configured current table severity are
entered in this table.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= {asamAlarmMIB 7}
asamCurrentAlarmEntry OBJECT-TYPE
SYNTAX AsamCurrentAlarmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for CurrentAlarmTable.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { asamCurrentAlarmIndex }
::= {asamCurrentAlarmTable 1}
AsamCurrentAlarmEntry ::= SEQUENCE {
asamCurrentAlarmIndex INTEGER (0..4294967295),
asamCurrentAlarmType AsamAlarmType,
asamCurrentAlarmStatus INTEGER (0..4294967295),
asamCurrentAlarmIndex1 INTEGER (0..4294967295),
asamCurrentAlarmIndex2 INTEGER (0..4294967295),
asamCurrentAlarmPtr OBJECT IDENTIFIER,
asamCurrentAlarmTime NetworkTimeInSeconds,
asamCurrentAlarmAddInfo DisplayString
}
asamCurrentAlarmIndex OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for a Current Alarm Entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamCurrentAlarmEntry 1}
asamCurrentAlarmType OBJECT-TYPE
SYNTAX AsamAlarmType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines the type of the alarms that are active
in this entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamCurrentAlarmEntry 2}
asamCurrentAlarmStatus OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines the current status of all alarms within one
alarm type and one index1-index2 combination at that time. The
alarms are represented in a bitmap with the following bitpositions:
1 NoDefect
2 AlarmNumber 1
4 AlarmNumber 2
8 AlarmNumber 3
16 AlarmNumber 4
.. ..............
For a definition of the bitmap, see the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamCurrentAlarmEntry 3}
asamCurrentAlarmIndex1 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index2. Together they
identify where the alarm occurred. For more information regarding
the index definition, refer to the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamCurrentAlarmEntry 4}
asamCurrentAlarmIndex2 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index1. See description of
Index1 for further info.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamCurrentAlarmEntry 5}
asamCurrentAlarmPtr OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is currently not used. In future releases this
object will be used to point to additional information."
::= {asamCurrentAlarmEntry 6}
asamCurrentAlarmTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the time in seconds when the entry was updated,
respectively added.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamCurrentAlarmEntry 7}
asamCurrentAlarmAddInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to keep some additional information about
the considered table entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamCurrentAlarmEntry 8}
--
-- asamAlarmLogTable and related objects.
--
asamAlarmLogLastEntry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the index of the last entry that was added to the
log table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 8}
asamAlarmLogReset OBJECT-TYPE
SYNTAX INTEGER {
resetCompleted(1),
reset(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is a button-like object to reset the alarm logging
table. When it is set to the Reset value, the log table is cleared,
and logging starts from index 1. When the reset action is completed,
this object is set to ResetCompleted. Setting this object to
resetCompleted, does not invoke any action.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 9}
asamAlarmLogResetTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time value in seconds when the alarm log was last reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmMIB 10}
asamAlarmLogSeverityLevel OBJECT-TYPE
SYNTAX AsamAlarmSeverityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object defines the lowest severity level an alarm must have in
order to be logged.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1-5
PERSIST: YES DEFVALUE: indeterminate UNITS: -"
::= {asamAlarmMIB 11}
asamAlarmLogBufferSize OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the size of the internal log buffer. This is
useful information when an overflow of the log buffer occurs.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 12}
asamAlarmLogFullAction OBJECT-TYPE
SYNTAX INTEGER {
wrap(1),
halt(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object defines the action to be taken when the alarm log buffer
is completely full. If set to Wrap, then older log records are
overwritten by recent ones. If it is set to Halt, then logging is
stopped until the log buffer is reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: wrap UNITS: -"
::= {asamAlarmMIB 13}
asamAlarmLogOverflowed OBJECT-TYPE
SYNTAX INTEGER {
notoverflowed(1),
overflowed(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates whether the log table is overflowed or not.
When the log buffer is reset, this object is set to Notoverflowed.
This object is not useful when FullAction is set to Wrap around.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 14}
asamAlarmLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamAlarmLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is used to log all alarm changes of alarms with a log
status set to active and a severity level equal or higher than the
configured logging severity. The entries are ordered by time. The
latest alarm change is logged as the last entry of this table.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= {asamAlarmMIB 15}
asamAlarmLogEntry OBJECT-TYPE
SYNTAX AsamAlarmLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for Alarm Log Table.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { asamAlarmLogIndex }
::= {asamAlarmLogTable 1}
AsamAlarmLogEntry ::= SEQUENCE {
asamAlarmLogIndex INTEGER (0..4294967295),
asamAlarmLogAlarmType AsamAlarmType,
asamAlarmLogAlarmStatus INTEGER (0..4294967295),
asamAlarmLogStatusChange INTEGER (0..4294967295),
asamAlarmLogIndex1 INTEGER (0..4294967295),
asamAlarmLogIndex2 INTEGER (0..4294967295),
asamAlarmLogPtr OBJECT IDENTIFIER,
asamAlarmLogTime NetworkTimeInSeconds,
asamAlarmLogAddInfo DisplayString,
asamAlarmLogBasicAlarmId INTEGER (0..4294967295)
}
asamAlarmLogIndex OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for the entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmLogEntry 1}
asamAlarmLogAlarmType OBJECT-TYPE
SYNTAX AsamAlarmType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines the type of the alarms in this entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmLogEntry 2}
asamAlarmLogAlarmStatus OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines the status of all alarms within one alarm type
and one index1-index2 combination for this logged entry. The alarms
are represented in a bitmap with the following bitpositions :
1 NoDefect
2 AlarmNumber 1
4 AlarmNumber 2
8 AlarmNumber 3
16 AlarmNumber 4
.. ..............
For a definition of the bitmap see the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmLogEntry 3}
asamAlarmLogStatusChange OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines the difference in the status bitmap with its
previous logged value. The bitpositions are conforming to the ones
in the asamAlarmLogAlarmStatus object.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmLogEntry 4}
asamAlarmLogIndex1 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index2. Together they
identify where the alarm occurred. For more information regarding
the index definition refer to the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmLogEntry 5}
asamAlarmLogIndex2 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index1. See description of
Index1 for further info.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmLogEntry 6}
asamAlarmLogPtr OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is currently not used. In future releases this object
will be used to point to additional information."
::= {asamAlarmLogEntry 7}
asamAlarmLogTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the time in seconds when the alarm was logged.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmLogEntry 8}
asamAlarmLogAddInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to keep some additional information about the
considered table entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmLogEntry 9}
asamAlarmLogBasicAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The meaning of this object depends on the value of asamAlarmLogAlarmType.
The following situations are possible:
1. The value of the asamAlarmLogAlarmType object corresponds to
'temporalFilter' or 'spatialFilter'. The table entry is related
to the state change of exact one derived alarm. The asamAlarm-
LogBasicAlarmId object identifies the basic alarm related to
the considered derived alarm.
2. The value of the asamAlarmLogAlarmType object does not
correspond to 'temporalFilter' or 'spatialFilter'. The table
entry is related to the state change of one or more basic
alarms. The asamAlarmLogBasicAlarmId object identifies one of
these basic alarms.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmLogEntry 10}
--
-- asamAlarmSnapshotTable and related objects
--
asamAlarmSnapshotTableStatus OBJECT-TYPE
SYNTAX INTEGER {
notInUse(1),
inUse(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Before reading the snapshot table, one must try to set this object
to inUse first. When it is already in this state, the set will fail;
when in the notInUse state, the set will succeed. The inUse state is
only kept for a limited time, which is defined by the
asamAlarmSnapshotTimeout object. When the timeout expires, this
object is automatically reset to the notInUse state and the snapshot
table is emptied.
Scenario for taking a snapshot :
================================
* Try to set the asamAlarmSnapshotTableStatus to inUse. Proceed
only if successfull;
* optionally set the owner string to enable other managers to
identify the current snapshot table user;
* set the snapshot table severity level;
* read the number of entries in the snapshot table;
* optionally read the severity status bitmap to identify the
active severity levels in the snapshot table;
* read out the snapshot table using GET or GETNEXT SNMP commands;
* free the snapshot table for other managers by setting the
status to notInUse.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: NO DEFVALUE: notInUse UNITS: -"
::= {asamAlarmMIB 16}
asamAlarmSnapshotOwner OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This string can contain an identification of the owner who took the
snapshot. When a manager wants to use the snapshot table, he can set
this string with a meaningful value. When the snapshot table is not
in use, the owner string cannot be set.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 17}
asamAlarmSnapshotTimeout OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the timeout in msec on the snapshot table.
The timer is started from the moment the snapshot table status is
set to inUse. It will be set to a default value and cannot be
changed by the manager.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: 120000 UNITS: milliseconds"
::= {asamAlarmMIB 18}
asamAlarmSnapshotSeverityLevel OBJECT-TYPE
SYNTAX AsamAlarmSeverityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates the lowest severity level of alarms that
should be visible in the snapshot table. When the snapshot table
status is in the notInUse state, the severity cannot be read or set.
When the snapshot table status is in the InUse state, the severity
level can only be set once to prevent confusion as to the lowest
severity in the snapshot table. After successfully setting the
severity level, the snapshot table and its related objects will
contain valid data as long as the snapshot table is in the inUse
state.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: 1-5
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 19}
asamNumberOfAlarmSnapshotEntries OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"When the snapshot table status is in the inUse state, this object
reflects the number of entries in the snapshot table. If the snapshot
table status is set to notInUse, this object can not be read.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 20}
asamAlarmSnapshotSeverityStatus OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the snapshot table status is set to notInUse, this object
can not be read. If the snapshot table status is inUse, this object
indicates all the active severity levels of the alarms in the
snapshot table (higher than the configured snapshot severity level).
They are represented as a bitmap with the following bitpositions :
1 NoDefect,
2 Indeterminate,
4 Warning,
8 Minor,
16 Major,
32 Critical.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 21}
asamAlarmSnapshotTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamAlarmSnapshotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is empty when the snapshot table status is set to
notInUse. When a snapshot is taken (see the description of the
snapshot table status object for a complete scenario), this table
will contain all active alarms, at the time the snapshot was taken,
ordered by severity. The lowest viewable severity is set with the
snapshot severity object.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= {asamAlarmMIB 22}
asamAlarmSnapshotEntry OBJECT-TYPE
SYNTAX AsamAlarmSnapshotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for asamAlarmSnapshotTable.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { asamAlarmSnapshotIndex }
::= {asamAlarmSnapshotTable 1}
AsamAlarmSnapshotEntry ::= SEQUENCE {
asamAlarmSnapshotIndex INTEGER (0..4294967295),
asamAlarmSnapshotType AsamAlarmType,
asamAlarmSnapshotStatus INTEGER (0..4294967295),
asamAlarmSnapshotIndex1 INTEGER (0..4294967295),
asamAlarmSnapshotIndex2 INTEGER (0..4294967295),
asamAlarmSnapshotPtr OBJECT IDENTIFIER,
asamAlarmSnapshotTime NetworkTimeInSeconds,
asamAlarmSnapshotAddInfo DisplayString
}
asamAlarmSnapshotIndex OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for an Alarm Snapshot Entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmSnapshotEntry 1}
asamAlarmSnapshotType OBJECT-TYPE
SYNTAX AsamAlarmType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines the type of the alarms in this entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmSnapshotEntry 2}
asamAlarmSnapshotStatus OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object defines the status of alarms in an alarm type at the
time the snapshot was taken. The alarms are represented in a bitmap
with the following bitpositions :
1 NoDefect
2 AlarmNumber 1
4 AlarmNumber 2
8 AlarmNumber 3
16 AlarmNumber 4
.. ..............
For a definition of the bitmap see the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmSnapshotEntry 3}
asamAlarmSnapshotIndex1 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index2. Together they
identify where the alarm occurred. For more information regarding
the index definition refer to the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmSnapshotEntry 4}
asamAlarmSnapshotIndex2 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index1. See description of
Index1 for further info.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmSnapshotEntry 5}
asamAlarmSnapshotPtr OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is currently not used. In future releases this
object will be used to point to additional information."
::= {asamAlarmSnapshotEntry 6}
asamAlarmSnapshotTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the time information in seconds when the entry was
updated, respectively added.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmSnapshotEntry 7}
asamAlarmSnapshotAddInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to keep some additional information about
the considered table entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmSnapshotEntry 8}
--
-- asamAlarm<severity>DeltaLogTables and related objects
--
asamNumberOfTotalChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter represents the total number of changes of all alarms
since startup. It is independent of the alarm severity level.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 23}
asamNumberOfIndeterminateChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter represents the total number of changes of all alarms
with a severity level Indeterminate since startup.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 24}
asamNumberOfWarningChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter represents the total number of changes of all alarms
with a severity level Warning since startup.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 25}
asamNumberOfMinorChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter represents the total number of changes of all alarms
with a severity level Minor since startup.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 26}
asamNumberOfMajorChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter represents the total number of changes of all alarms
with a severity level Major since startup.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 27}
asamNumberOfCriticalChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter represents the total number of changes of all alarms
with a severity level Critical since startup.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 28}
--
-- One deprecated object removed.
--
asamAlarmTrapNumberOfAlarmChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This counter represents the number of alarm changes (of alarms with
a severity equal or higher than the configured trap severity) since
startup. It is a wraparound counter between 0 and MAX."
::= {asamAlarmMIB 30}
--
-- Eight deprecated objects removed.
--
asamAlarmTotalDeltaLogBufferSize OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value indicates the maximum of distributed severity-specific
delta log entries. This means that :
asamAlarmIndeterminateDeltaLogBufferSize
+ asamAlarmWarningDeltaLogBufferSize
+ asamAlarmMinorDeltaLogBufferSize
+ asamAlarmMajorDeltaLogBufferSize
+ asamAlarmCriticalDeltaLogBufferSize
must be equal or smaller than the value of this object.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 39}
--
-- asamAlarmIndeterminateDeltaLogTable and related objects
--
asamAlarmIndeterminateDeltaLogLastEntry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the index of the last entry that was added to the
Indeterminate delta log table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 40}
asamAlarmIndeterminateDeltaLogReset OBJECT-TYPE
SYNTAX AsamAlarmLogResetType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is a button-like object to reset the Indeterminate
delta logging table. When it is set to the reset value, the table
is cleared, and logging starts from index 1. When the reset action
is completed, this object is set to resetCompleted. Setting this
object to resetCompleted, does not invoke any action.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 41}
asamAlarmIndeterminateDeltaLogResetTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Network time in seconds indicating when the Indeterminate Delta
Log Table was last reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmMIB 42}
asamAlarmIndeterminateDeltaLogBufferSize OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object gives the size of the internal Indeterminate Delta
Log buffer. It can be set to a new (positive, non-zero) value,
but when the sum of all severity-specific Delta Log Table
buffersizes would exceed the asamAlarmTotalDeltaLogBufferSize
setting with this new value, a smaller value will be set. This
value will be chosen so that the sum of buffersizes is equal to
the asamAlarmTotalDeltaLogBufferSize. When the size is set to a
value smaller than the current number of used entries in the delta
log table, a value equal to that number of entries will be set.
Setting this object is not supported yet.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 43}
asamAlarmIndeterminateDeltaLogFullAction OBJECT-TYPE
SYNTAX AsamAlarmLogFullActionType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object defines the action to be taken when the Indeterminate
delta log buffer is completely full. If set to Wrap, older log
records will be overwritten by recent ones. If it is set to Halt,
logging is stopped until the buffer is reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: wrap UNITS: -"
::= {asamAlarmMIB 44}
asamAlarmIndeterminateDeltaLogOverflowed OBJECT-TYPE
SYNTAX AsamAlarmLogOverflowType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates whether the Indeterminate delta log table is
overflowed or not. When the delta log buffer is reset, this object
is set to notoverflowed. This object is not meaningful when
asamAlarmIndeterminateDeltaLogFullAction is set to Wrap around.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 45}
asamAlarmIndeterminateDeltaLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamAlarmIndeterminateDeltaLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is to log all reported alarms with a severity equal to
Indeterminate. The Logged records are ordered by time.
The latest Indeterminate reported alarm change is logged as the last
entry of this table.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= {asamAlarmMIB 46}
asamAlarmIndeterminateDeltaLogEntry OBJECT-TYPE
SYNTAX AsamAlarmIndeterminateDeltaLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for the Indeterminate Delta Log Table.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { asamAlarmIndeterminateDeltaLogIndex }
::= {asamAlarmIndeterminateDeltaLogTable 1}
AsamAlarmIndeterminateDeltaLogEntry ::= SEQUENCE {
asamAlarmIndeterminateDeltaLogIndex INTEGER (0..4294967295),
asamAlarmIndeterminateDeltaLogAlarmId INTEGER (0..4294967295),
asamAlarmIndeterminateDeltaLogAlarmState AsamAlarmStateType,
asamAlarmIndeterminateDeltaLogIndex1 INTEGER (0..4294967295),
asamAlarmIndeterminateDeltaLogIndex2 INTEGER (0..4294967295),
asamAlarmIndeterminateDeltaLogPtr OBJECT IDENTIFIER,
asamAlarmIndeterminateDeltaLogTime NetworkTimeInSeconds,
asamAlarmIndeterminateDeltaLogAddInfo DisplayString,
asamAlarmIndeterminateDeltaLogBasicAlarmId INTEGER (0..4294967295)
}
asamAlarmIndeterminateDeltaLogIndex OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for an Indeterminate Delta Log Table Entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmIndeterminateDeltaLogEntry 1}
asamAlarmIndeterminateDeltaLogAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the unique id for an alarm. It is a combination of two
distinct parts of information: the alarm type and the alarm number.
The first half represents the type and the second (rightmost) part
the alarm number. This alarm number represents the bit position of
an alarm in a bitmap of an active alarm entry.
The value of asamAlarmId can be found using a simple formula:
(AlarmType x 2^16) + AlarmNumber.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmIndeterminateDeltaLogEntry 2}
asamAlarmIndeterminateDeltaLogAlarmState OBJECT-TYPE
SYNTAX AsamAlarmStateType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This reflects the alarm state. When an alarm becomes active, the
state will be active. If it dissappears, it will be nonActive.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmIndeterminateDeltaLogEntry 3}
asamAlarmIndeterminateDeltaLogIndex1 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index2. Together they
identify where the alarm occurred. For more information regarding
the index definition refer to the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmIndeterminateDeltaLogEntry 4}
asamAlarmIndeterminateDeltaLogIndex2 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index1. See the description
of Index1 for further info.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmIndeterminateDeltaLogEntry 5}
asamAlarmIndeterminateDeltaLogPtr OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is currently not used."
::= {asamAlarmIndeterminateDeltaLogEntry 6}
asamAlarmIndeterminateDeltaLogTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the network time in seconds when the alarm
was logged.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmIndeterminateDeltaLogEntry 7}
asamAlarmIndeterminateDeltaLogAddInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to keep some additional information about
the considered table entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmIndeterminateDeltaLogEntry 8}
asamAlarmIndeterminateDeltaLogBasicAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The meaning and use of this object depends on the value of the asamAlarmIndeterminateDeltaLogAlarmId.
The following situations are possible:
1. asamAlarmIndeterminateDeltaLogAlarmId points to a basic
alarm. The value of asamAlarmIndeterminateDeltaLogBasicAlamId
is identical to the value of the asamAlarmInderminateDelta
LogAlarmId (no added value).
2. asamAlarmIndeterminateDeltaLogAlarmId points to a derived
alarm of a temporal/spatial alarm filter. The value of
asamAlarmIndeterminateDeltaLogBasicAlarmId identifies the basic
alarm that is related to the considered derived alarm.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmIndeterminateDeltaLogEntry 9}
--
-- asamAlarmWarningDeltaLogTable and related objects
--
asamAlarmWarningDeltaLogLastEntry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the index of the last entry that was added to the
Warning delta log table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 47}
asamAlarmWarningDeltaLogReset OBJECT-TYPE
SYNTAX AsamAlarmLogResetType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is a button-like object to reset the Warning
delta logging table. When it is set to the reset value, the table
is cleared, and logging starts from index 1. When the reset action
is completed, this object is set to resetCompleted. Setting this
object to resetCompleted, does not invoke any action.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 48}
asamAlarmWarningDeltaLogResetTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Network time in seconds indicating when the Warning Delta Log
Table was last reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmMIB 49}
asamAlarmWarningDeltaLogBufferSize OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object gives the size of the internal Warning Delta
Log buffer. It can be set to a new (positive, non-zero) value,
but when the sum of all severity-specific Delta Log Table
buffersizes would exceed the asamAlarmTotalDeltaLogBufferSize
setting with this new value, a smaller value will be set. This
value will be chosen so that the sum of buffersizes is equal to
the asamAlarmTotalDeltaLogBufferSize. When the size is set to a
value smaller than the current number of used entries in the delta
log table, a value equal to that number of entries will be set.
Setting this object is not supported yet.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 50}
asamAlarmWarningDeltaLogFullAction OBJECT-TYPE
SYNTAX AsamAlarmLogFullActionType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object defines the action to be taken when the Warning
delta log buffer is completely full. If set to Wrap, older log
records will be overwritten by recent ones. If it is set to Halt,
logging is stopped until the buffer is reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: wrap UNITS: -"
::= {asamAlarmMIB 51}
asamAlarmWarningDeltaLogOverflowed OBJECT-TYPE
SYNTAX AsamAlarmLogOverflowType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates whether the Warning delta log table is
overflowed or not. When the delta log buffer is reset, this object
is set to notoverflowed. This object is not meaningful when
asamAlarmWarningDeltaLogFullAction is set to Wrap around.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 52}
asamAlarmWarningDeltaLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamAlarmWarningDeltaLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is to log all reported alarms with a severity equal to
Warning. The Logged records are ordered by time.
The latest Warning reported alarm change is logged as the last
entry of this table.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= {asamAlarmMIB 53}
asamAlarmWarningDeltaLogEntry OBJECT-TYPE
SYNTAX AsamAlarmWarningDeltaLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for the Warning Delta Log Table.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { asamAlarmWarningDeltaLogIndex }
::= {asamAlarmWarningDeltaLogTable 1}
AsamAlarmWarningDeltaLogEntry ::= SEQUENCE {
asamAlarmWarningDeltaLogIndex INTEGER (0..4294967295),
asamAlarmWarningDeltaLogAlarmId INTEGER (0..4294967295),
asamAlarmWarningDeltaLogAlarmState AsamAlarmStateType,
asamAlarmWarningDeltaLogIndex1 INTEGER (0..4294967295),
asamAlarmWarningDeltaLogIndex2 INTEGER (0..4294967295),
asamAlarmWarningDeltaLogPtr OBJECT IDENTIFIER,
asamAlarmWarningDeltaLogTime NetworkTimeInSeconds,
asamAlarmWarningDeltaLogAddInfo DisplayString,
asamAlarmWarningDeltaLogBasicAlarmId INTEGER (0..4294967295)
}
asamAlarmWarningDeltaLogIndex OBJECT-TYPE
SYNTAX INTEGER (0.. 4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for a Warning Delta Log Table Entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmWarningDeltaLogEntry 1}
asamAlarmWarningDeltaLogAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the unique id for an alarm. It is a combination of two
distinct parts of information: the alarm type and the alarm number.
The first half represents the type and the second (rightmost) part
the alarm number. This alarm number represents the bit position of
an alarm in a bitmap of an active alarm entry.
The value of asamAlarmId can be found using a simple formula:
(AlarmType x 2^16) + AlarmNumber.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmWarningDeltaLogEntry 2}
asamAlarmWarningDeltaLogAlarmState OBJECT-TYPE
SYNTAX AsamAlarmStateType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This reflects the alarm state. When an alarm becomes active,
the state will be active. If it dissappears, it will be nonActive.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmWarningDeltaLogEntry 3}
asamAlarmWarningDeltaLogIndex1 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index2. Together they
identify where the alarm occurred. For more information regarding
the index definition refer to the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmWarningDeltaLogEntry 4}
asamAlarmWarningDeltaLogIndex2 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index1. See the description
of Index1 for further info.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmWarningDeltaLogEntry 5}
asamAlarmWarningDeltaLogPtr OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is currently not used."
::= {asamAlarmWarningDeltaLogEntry 6}
asamAlarmWarningDeltaLogTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the network time in seconds when the alarm
was logged.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmWarningDeltaLogEntry 7}
asamAlarmWarningDeltaLogAddInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to keep some additional information about
the considered table entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmWarningDeltaLogEntry 8}
asamAlarmWarningDeltaLogBasicAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The meaning and use of this object depends on the value of the asamAlarmWarningDeltaLogAlarmId.
The following situations are possible:
1. asamAlarmWarningDeltaLogAlarmId points to a basic
alarm. The value of asamAlarmWarningDeltaLogBasicAlarmId
is identical to the value of the asamAlarmWarningDeltaLog-
AlarmId (no added value).
2. asamAlarmWarningDeltaLogAlarmId points to a derived
alarm of temporal/spatial alarm filter. The value of asamAlarm-
WarningDeltaLogBasicAlarmId identifies the basic alarm that
is related to the considered derived alarm.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmWarningDeltaLogEntry 9}
--
-- asamAlarmMinorDeltaLogTable and related objects
--
asamAlarmMinorDeltaLogLastEntry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the index of the last entry that was added
to the Minor delta log table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 54}
asamAlarmMinorDeltaLogReset OBJECT-TYPE
SYNTAX AsamAlarmLogResetType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is a button-like object to reset the Minor
delta logging table. When it is set to the reset value, the table
is cleared, and logging starts from index 1. When the reset action
is completed, this object is set to resetCompleted. Setting this
object to resetCompleted, does not invoke any action.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 55}
asamAlarmMinorDeltaLogResetTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Network time in seconds indicating when the Minor Delta Log
Table was last reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmMIB 56}
asamAlarmMinorDeltaLogBufferSize OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object gives the size of the internal Minor Delta
Log buffer. It can be set to a new (positive, non-zero) value,
but when the sum of all severity-specific Delta Log Table
buffersizes would exceed the asamAlarmTotalDeltaLogBufferSize
setting with this new value, a smaller value will be set. This
value will be chosen so that the sum of buffersizes is equal to
the asamAlarmTotalDeltaLogBufferSize. When the size is set to a
value smaller than the current number of used entries in the delta
log table, a value equal to that number of entries will be set.
Setting this object is not supported yet.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 57}
asamAlarmMinorDeltaLogFullAction OBJECT-TYPE
SYNTAX AsamAlarmLogFullActionType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object defines the action to be taken when the Minor
delta log buffer is completely full. If set to Wrap, older log
records will be overwritten by recent ones. If it is set to Halt,
logging is stopped until the buffer is reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: wrap UNITS: -"
::= {asamAlarmMIB 58}
asamAlarmMinorDeltaLogOverflowed OBJECT-TYPE
SYNTAX AsamAlarmLogOverflowType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates whether the Minor delta log table is
overflowed or not. When the delta log buffer is reset, this object
is set to notoverflowed. This object is not meaningful when
asamAlarmMinorDeltaLogFullAction is set to Wrap around.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 59}
asamAlarmMinorDeltaLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamAlarmMinorDeltaLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is to log all reported alarms with a severity equal to
Minor. The Logged records are ordered by time.
The latest Minor reported alarm change is logged as the last
entry of this table.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= {asamAlarmMIB 60}
asamAlarmMinorDeltaLogEntry OBJECT-TYPE
SYNTAX AsamAlarmMinorDeltaLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for the Minor Delta Log Table.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { asamAlarmMinorDeltaLogIndex }
::= {asamAlarmMinorDeltaLogTable 1}
AsamAlarmMinorDeltaLogEntry ::= SEQUENCE {
asamAlarmMinorDeltaLogIndex INTEGER (0..4294967295),
asamAlarmMinorDeltaLogAlarmId INTEGER (0..4294967295),
asamAlarmMinorDeltaLogAlarmState AsamAlarmStateType,
asamAlarmMinorDeltaLogIndex1 INTEGER (0..4294967295),
asamAlarmMinorDeltaLogIndex2 INTEGER (0..4294967295),
asamAlarmMinorDeltaLogPtr OBJECT IDENTIFIER,
asamAlarmMinorDeltaLogTime NetworkTimeInSeconds,
asamAlarmMinorDeltaLogAddInfo DisplayString,
asamAlarmMinorDeltaLogBasicAlarmId INTEGER (0..4294967295)
}
asamAlarmMinorDeltaLogIndex OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for a Minor Delta Log Table Entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMinorDeltaLogEntry 1}
asamAlarmMinorDeltaLogAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the unique id for an alarm. It is a combination of two
distinct parts of information: the alarm type and the alarm number.
The first half represents the type and the second (rightmost) part
the alarm number. This alarm number represents the bit position of
an alarm in a bitmap of an active alarm entry.
The value of asamAlarmId can be found using a simple formula:
(AlarmType x 2^16) + AlarmNumber.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMinorDeltaLogEntry 2}
asamAlarmMinorDeltaLogAlarmState OBJECT-TYPE
SYNTAX AsamAlarmStateType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This reflects the alarm state. When an alarm becomes active,
the state will be active. If it dissappears, it will be nonActive.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMinorDeltaLogEntry 3}
asamAlarmMinorDeltaLogIndex1 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index2. Together they
identify where the alarm occurred. For more information regarding
the index definition refer to the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMinorDeltaLogEntry 4}
asamAlarmMinorDeltaLogIndex2 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index1. See the description
of Index1 for further info.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMinorDeltaLogEntry 5}
asamAlarmMinorDeltaLogPtr OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is currently not used."
::= {asamAlarmMinorDeltaLogEntry 6}
asamAlarmMinorDeltaLogTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the network time in seconds when the alarm
was logged.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmMinorDeltaLogEntry 7}
asamAlarmMinorDeltaLogAddInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to keep some additional information about
the considered table entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMinorDeltaLogEntry 8}
asamAlarmMinorDeltaLogBasicAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The meaning and use of this object depends on the value of the asamAlarmMinorDeltaLogAlarmId.
The following situations are possible:
1. asamAlarmMinorDeltaLogAlarmId points to a basic alarm. The
value of asamAlarmMinorDeltaLogBasicAlarmId is identical to
the value of the asamAlarmMinorDeltaLogAlarmId (no added
value).
2. asamAlarmMinorDeltaLogAlarmId points to a derived alarm of
a temporal/spatial alarm filter. The value of asamAlarmMinor-
DeltaLogBasicAlarmId identifies the basic alarm that is related
to the considered derived alarm.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMinorDeltaLogEntry 9}
--
-- asamAlarmMajorDeltaLogTable and related objects
--
asamAlarmMajorDeltaLogLastEntry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the index of the last entry that was added
to the Major delta log table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 61}
asamAlarmMajorDeltaLogReset OBJECT-TYPE
SYNTAX AsamAlarmLogResetType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is a button-like object to reset the Major
delta logging table. When it is set to the reset value, the table
is cleared, and logging starts from index 1. When the reset action
is completed, this object is set to resetCompleted. Setting this
object to resetCompleted, does not invoke any action.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 62}
asamAlarmMajorDeltaLogResetTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Network time in seconds indicating when the Major Delta Log
Table was last reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmMIB 63}
asamAlarmMajorDeltaLogBufferSize OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object gives the size of the internal Major Delta
Log buffer. It can be set to a new (positive, non-zero) value,
but when the sum of all severity-specific Delta Log Table
buffersizes would exceed the asamAlarmTotalDeltaLogBufferSize
setting with this new value, a smaller value will be set. This
value will be chosen so that the sum of buffersizes is equal to
the asamAlarmTotalDeltaLogBufferSize. When the size is set to a
value smaller than the current number of used entries in the delta
log table, a value equal to that number of entries will be set.
Setting this object is not supported yet.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 64}
asamAlarmMajorDeltaLogFullAction OBJECT-TYPE
SYNTAX AsamAlarmLogFullActionType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object defines the action to be taken when the Major
delta log buffer is completely full. If set to Wrap, older log
records will be overwritten by recent ones. If it is set to Halt,
logging is stopped until the buffer is reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: wrap UNITS: -"
::= {asamAlarmMIB 65}
asamAlarmMajorDeltaLogOverflowed OBJECT-TYPE
SYNTAX AsamAlarmLogOverflowType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates whether the Major delta log table is
overflowed or not. When the delta log buffer is reset, this object
is set to notoverflowed. This object is not meaningful when
asamAlarmMajorDeltaLogFullAction is set to Wrap around.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 66}
asamAlarmMajorDeltaLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamAlarmMajorDeltaLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is to log all reported alarms with a severity equal to
Major. The Logged records are ordered by time.
The latest Major reported alarm change is logged as the last
entry of this table.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= {asamAlarmMIB 67}
asamAlarmMajorDeltaLogEntry OBJECT-TYPE
SYNTAX AsamAlarmMajorDeltaLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for the Major Delta Log Table.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { asamAlarmMajorDeltaLogIndex }
::= {asamAlarmMajorDeltaLogTable 1}
AsamAlarmMajorDeltaLogEntry ::= SEQUENCE {
asamAlarmMajorDeltaLogIndex INTEGER (0..4294967295),
asamAlarmMajorDeltaLogAlarmId INTEGER (0..4294967295),
asamAlarmMajorDeltaLogAlarmState AsamAlarmStateType,
asamAlarmMajorDeltaLogIndex1 INTEGER (0..4294967295),
asamAlarmMajorDeltaLogIndex2 INTEGER (0..4294967295),
asamAlarmMajorDeltaLogPtr OBJECT IDENTIFIER,
asamAlarmMajorDeltaLogTime NetworkTimeInSeconds,
asamAlarmMajorDeltaLogAddInfo DisplayString,
asamAlarmMajorDeltaLogBasicAlarmId INTEGER (0..4294967295)
}
asamAlarmMajorDeltaLogIndex OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for a Major Delta Log Table Entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMajorDeltaLogEntry 1}
asamAlarmMajorDeltaLogAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the unique id for an alarm. It is a combination of two
distinct parts of information: the alarm type and the alarm number.
The first half represents the type and the second (rightmost) part
the alarm number. This alarm number represents the bit position of
an alarm in a bitmap of an active alarm entry.
The value of asamAlarmId can be found using a simple formula:
(AlarmType x 2^16) + AlarmNumber.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMajorDeltaLogEntry 2}
asamAlarmMajorDeltaLogAlarmState OBJECT-TYPE
SYNTAX AsamAlarmStateType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This reflects the alarm state. When an alarm becomes active,
the state will be active. If it dissappears, it will be nonActive.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMajorDeltaLogEntry 3}
asamAlarmMajorDeltaLogIndex1 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index2. Together they
identify where the alarm occurred. For more information regarding
the index definition refer to the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMajorDeltaLogEntry 4}
asamAlarmMajorDeltaLogIndex2 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index1. See the description
of Index1 for further info.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMajorDeltaLogEntry 5}
asamAlarmMajorDeltaLogPtr OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is currently not used."
::= {asamAlarmMajorDeltaLogEntry 6}
asamAlarmMajorDeltaLogTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the network time in seconds when the alarm
was logged.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmMajorDeltaLogEntry 7}
asamAlarmMajorDeltaLogAddInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to keep some additional information about
the considered table entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMajorDeltaLogEntry 8}
asamAlarmMajorDeltaLogBasicAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The meaning and use of this object depends on the value of the asamAlarmMajorDeltaLogAlarmId.
The following situations are possible:
1. asamAlarmMajorDeltaLogAlarmId points to a basic alarm.
The value of asamAlarmMajorDeltaLogBasicAlarmId is identical
to the value of the asamAlarmMajorDeltaLogAlarmId (no added
value).
2. asamAlarmMajorDeltaLogAlarmId points to a derived alarm of
a temporal/spatial alarm filter. The value of asamAlarmMajor-
DeltaLogBasicAlarmId identifies the basic alarm that is related
to the considered derived alarm.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMajorDeltaLogEntry 9}
--
-- asamAlarmCriticalDeltaLogTable and related objects
--
asamAlarmCriticalDeltaLogLastEntry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the index of the last entry that was added
to the Critical delta log table.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 68}
asamAlarmCriticalDeltaLogReset OBJECT-TYPE
SYNTAX AsamAlarmLogResetType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is a button-like object to reset the Critical
delta logging table. When it is set to the reset value, the table
is cleared, and logging starts from index 1. When the reset action
is completed, this object is set to resetCompleted. Setting this
object to resetCompleted, does not invoke any action.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 69}
asamAlarmCriticalDeltaLogResetTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Network time in seconds indicating when the Critical Delta Log
Table was last reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmMIB 70}
asamAlarmCriticalDeltaLogBufferSize OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object gives the size of the internal Critical Delta
Log buffer. It can be set to a new (positive, non-zero) value,
but when the sum of all severity-specific Delta Log Table
buffersizes would exceed the asamAlarmTotalDeltaLogBufferSize
setting with this new value, a smaller value will be set. This
value will be chosen so that the sum of buffersizes is equal to
the asamAlarmTotalDeltaLogBufferSize. When the size is set to a
value smaller than the current number of used entries in the delta
log table, a value equal to that number of entries will be set.
Setting this object is not supported yet.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NO RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 71}
asamAlarmCriticalDeltaLogFullAction OBJECT-TYPE
SYNTAX AsamAlarmLogFullActionType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object defines the action to be taken when the Critical
delta log buffer is completely full. If set to Wrap, older log
records will be overwritten by recent ones. If it is set to Halt,
logging is stopped until the buffer is reset.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: YES RANGE: See above
PERSIST: YES DEFVALUE: wrap UNITS: -"
::= {asamAlarmMIB 72}
asamAlarmCriticalDeltaLogOverflowed OBJECT-TYPE
SYNTAX AsamAlarmLogOverflowType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object indicates whether the Critical delta log table is
overflowed or not. When the delta log buffer is reset, this object
is set to notoverflowed. This object is not meaningful when
asamAlarmCriticalDeltaLogFullAction is set to Wrap around.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmMIB 73}
asamAlarmCriticalDeltaLogTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamAlarmCriticalDeltaLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is to log all reported alarms with a severity equal to
Critical. The Logged records are ordered by time.
The latest Critical reported alarm change is logged as the last
entry of this table.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= {asamAlarmMIB 74}
asamAlarmCriticalDeltaLogEntry OBJECT-TYPE
SYNTAX AsamAlarmCriticalDeltaLogEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for the Critical Delta Log Table.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { asamAlarmCriticalDeltaLogIndex }
::= {asamAlarmCriticalDeltaLogTable 1}
AsamAlarmCriticalDeltaLogEntry ::= SEQUENCE {
asamAlarmCriticalDeltaLogIndex INTEGER (0..4294967295),
asamAlarmCriticalDeltaLogAlarmId INTEGER (0..4294967295),
asamAlarmCriticalDeltaLogAlarmState AsamAlarmStateType,
asamAlarmCriticalDeltaLogIndex1 INTEGER (0..4294967295),
asamAlarmCriticalDeltaLogIndex2 INTEGER (0..4294967295),
asamAlarmCriticalDeltaLogPtr OBJECT IDENTIFIER,
asamAlarmCriticalDeltaLogTime NetworkTimeInSeconds,
asamAlarmCriticalDeltaLogAddInfo DisplayString,
asamAlarmCriticalDeltaLogBasicAlarmId INTEGER (0..4294967295)
}
asamAlarmCriticalDeltaLogIndex OBJECT-TYPE
SYNTAX INTEGER (0.. 4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index for a Critical Delta Log Table Entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmCriticalDeltaLogEntry 1}
asamAlarmCriticalDeltaLogAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the unique id for an alarm. It is a combination of two
distinct parts of information: the alarm type and the alarm number.
The first half represents the type and the second (rightmost) part
the alarm number. This alarm number represents the bit position of
an alarm in a bitmap of an active alarm entry.
The value of asamAlarmId can be found using a simple formula:
(AlarmType x 2^16) + AlarmNumber.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmCriticalDeltaLogEntry 2}
asamAlarmCriticalDeltaLogAlarmState OBJECT-TYPE
SYNTAX AsamAlarmStateType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This reflects the alarm state. When an alarm becomes active,
the state will be active. If it dissappears, it will be nonActive.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmCriticalDeltaLogEntry 3}
asamAlarmCriticalDeltaLogIndex1 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index2. Together they
identify where the alarm occurred. For more information regarding
the index definition refer to the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmCriticalDeltaLogEntry 4}
asamAlarmCriticalDeltaLogIndex2 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index1. See the description
of Index1 for further info.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmCriticalDeltaLogEntry 5}
asamAlarmCriticalDeltaLogPtr OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This object is currently not used."
::= {asamAlarmCriticalDeltaLogEntry 6}
asamAlarmCriticalDeltaLogTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the network time in seconds when the alarm
was logged.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmCriticalDeltaLogEntry 7}
asamAlarmCriticalDeltaLogAddInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to keep some additional information about
the considered table entry.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmCriticalDeltaLogEntry 8}
asamAlarmCriticalDeltaLogBasicAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The meaning and use of this object depends on the value of the asamAlarmCriticalDeltaLogAlarmId.
The following situations are possible:
1. asamAlarmCriticalDeltaLogAlarmId points to a basic alarm.
The value of asamAlarmCriticalDeltaLogBasicAlarmId is identical
to the value of the asamAlarmCriticalDeltaLogAlarmId (no added
value).
2. asamAlarmCriticalDeltaLogAlarmId points to a derived alarm of
a temporal/spatial alarm filter. The value of asamAlarm-
CriticalDeltaLogBasicAlarmId identifies the basic alarm that is
related to the considered derived alarm.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmCriticalDeltaLogEntry 9}
--
-- Object to set mininal severity for reporting of
-- non-interface-related alarms.
--
asamAlarmNonItfReportingSeverity OBJECT-TYPE
SYNTAX AsamAlarmSeverityType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This objects specifies for all non interface related alarms
the minimal severity for the alarm to be reported.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1-5
PERSIST: NO DEFVALUE: major UNITS: -"
::= {asamAlarmMIB 75}
asamAlarmFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamAlarmFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Static table, representing the alarm filters inside the ASAM.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above "
::= {asamAlarmMIB 76}
asamAlarmFilterEntry OBJECT-TYPE
SYNTAX AsamAlarmFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION "Entry of the asamAlarmFilterTable.
Each row in the table contains management infornation applicable
to a specific alarm filter inside the ASAM.
ALCATEL NOTE:
SUPPORT: YES "
INDEX { asamAlarmFilterType, asamAlarmFilterNumber }
::= {asamAlarmFilterTable 1}
AsamAlarmFilterEntry ::= SEQUENCE {
asamAlarmFilterType INTEGER,
asamAlarmFilterNumber INTEGER (1..31),
asamAlarmFilterBasicAlarmId INTEGER (0..4294967295),
asamAlarmFilterStatus INTEGER,
asamAlarmFilterThreshold INTEGER (2.. 65535),
asamAlarmFilterWindow INTEGER (1.. 65535)
}
asamAlarmFilterType OBJECT-TYPE
SYNTAX INTEGER {
temporal(1),
spatial(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Index in the asamAlarmFilterTable. This object is used to define
the type of the considered alarm filter.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmFilterEntry 1}
asamAlarmFilterNumber OBJECT-TYPE
SYNTAX INTEGER (1..31)
ACCESS read-only
STATUS mandatory
DESCRIPTION "Index in the asamAlarmFilterTable. This index, together with
asamAlarmFilterType, uniquely identifies the considered alarm
filter within the asamAlarmFilterTable.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmFilterEntry 2}
asamAlarmFilterBasicAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-write
STATUS mandatory
DESCRIPTION "The value of this object corresponds to the unique identifica-
tion of the basic alarm related to the considered alarm filter.
Each alarm filter in the ASAM is related to exact one basic alarm.
The interpretation of this ID is identical to the interpretation
of asamAlarmId in the entries of the asamAlarmTable.
An overview of the different basic alarms supported by the ASAM in
R4.5 can be found in the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmFilterEntry 3}
asamAlarmFilterStatus OBJECT-TYPE
SYNTAX INTEGER {
notInUse(1),
inUse(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "This object is used by the operator to activate/deactivate a
configured alarm filter.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmFilterEntry 4}
asamAlarmFilterThreshold OBJECT-TYPE
SYNTAX INTEGER (2..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION "This object is used by the operator to specify the threshold
value of the considered alarm filter. This value must be greater
than 1 in order to make sense.
The meaning of this object depends on the alarm filter type.
temporal: the number of off_to_on transitions of the considered
basic alarm that have to be detected on a specific
object during an on-going filtering filter, before the
related derived alarm is raised.
spatial: the number of objects within the ASAM for which the
considered basic alarm must be raised before the related
derived alarm is raised.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmFilterEntry 5}
asamAlarmFilterWindow OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION "This object is used by the operator to specify the duration
(number of seconds) of the filtering window. This object only
makes sense when the considered alarm filter is a temporal filter
(not relevant in case of a spatial alarm filter).
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: YES DEFVALUE: NA UNITS: -"
::= {asamAlarmFilterEntry 6}
asamAlarmReport OBJECT IDENTIFIER ::= {asamAlarmMIB 77}
asamAlarmReportId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the unique id for the alarm that was last raised or cleared.
It is a combination of 2 distinct parts of information : the alarm
type and the alarm number.
The first half represents the type and the second (most right) part
the alarm number. This alarm number represents the bit position of
an alarm in a bitmap of an active alarm entry. Thus the value of
asamAlarmId can be found using a simple formula: (AlarmType x 2^16)
+ AlarmNumber. E.g. an alarm with alarm type 5 and alarm number 3
is represented as 0x00050003.
A value of zero means no alarm was raised or cleared yet.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmReport 1}
asamAlarmReportAlarmState OBJECT-TYPE
SYNTAX AsamAlarmStateType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This reflects the alarm state of the last raised or cleared alarm.
When an alarm becomes active, the state will be active.
If it dissappears, it will be nonActive.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmReport 2}
asamAlarmReportSeverity OBJECT-TYPE
SYNTAX AsamAlarmSeverityType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This reflects the severity level of the last raised or cleared alarm.
This severity may be indeterminate, warning, minor, major and critical.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 1-5
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmReport 3}
asamAlarmReportIndex1 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index2. Together they
identify where the last raised or cleared alarm occurred.
For more information regarding the index definition,
refer to the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmReport 4}
asamAlarmReportIndex2 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index1. Together they
identify where the last raised or cleared alarm occurred.
For more information regarding the index definition,
refer to the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmReport 5}
asamAlarmReportTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the time in seconds when the last alarm has
changed state (either raised or cleared).
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmReport 6}
asamAlarmReportAddInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to keep some additional information about
the last raised or cleared alarm.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmReport 7}
asamAlarmQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF AsamAlarmQueryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is used to retrieve all the reported alarms by filters.
For each alarm, there is an entry. Each entry includes the detailed informations for this alarm.
ALCATEL NOTE:
SUPPORT: YES TABLESIZE: DEP as described above"
::= {asamAlarmMIB 78}
asamAlarmQueryEntry OBJECT-TYPE
SYNTAX AsamAlarmQueryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry for the alarm query table. Each row in the table contains the detailed
information and status for each alarm.
ALCATEL NOTE:
SUPPORT: YES"
INDEX { asamAlarmQueryAlarmId,
asamAlarmQuerySeverity,
asamAlarmQueryServAff,
asamAlarmQueryAid }
::= {asamAlarmQueryTable 1}
AsamAlarmQueryEntry ::= SEQUENCE {
asamAlarmQueryAlarmId INTEGER (0..4294967295),
asamAlarmQueryAid INTEGER (0..4294967295),
asamAlarmQuerySeverity AsamAlarmSeverityType,
asamAlarmQueryServAff AsamAlarmServAffType,
asamAlarmQueryType AsamAlarmType,
asamAlarmQueryLocation AsamAlarmLocation,
asamAlarmQueryDirection AsamAlarmDirection,
asamAlarmQueryTime NetworkTimeInSeconds,
asamAlarmQueryAidInfo DisplayString,
asamAlarmQueryInfo DisplayString,
asamAlarmQueryIndex1 INTEGER (0..4294967295),
asamAlarmQueryIndex2 INTEGER (0..4294967295)
}
asamAlarmQueryAlarmId OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the alarm identification. It's a 32bit integer and the scheme is described as following:
====================================
| bit31 ~ bit16 | | bit15 ~ bit0 |
| alarm type | + | alarm number |
====================================
If alarm number is put as 0, all the alarms belong to this alarm type will be retrieved.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmQueryEntry 1}
asamAlarmQueryAid OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This reflects the alarm index. If the operator wants to show the specific alarm,
it stands for the alarm index1 defined in alarm table.
If the operator wants to show all the alarms, it is 0.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmQueryEntry 2}
asamAlarmQuerySeverity OBJECT-TYPE
SYNTAX AsamAlarmSeverityType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This reflects the severity level of the last raised or cleared alarm.
This severity may be indeterminate, warning, minor, major critical and all.
0-all level, 1-indeterminate, 2-warning,
3-minor, 4-major, 5-critical
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0-5
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmQueryEntry 3}
asamAlarmQueryServAff OBJECT-TYPE
SYNTAX AsamAlarmServAffType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This reflects the sevice affecting or not in query alarm filter.
0-all affecting, 1-service-affecting, 2-not service affecting
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: 0-2
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmQueryEntry 4}
asamAlarmQueryType OBJECT-TYPE
SYNTAX AsamAlarmType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This defined the alarm type.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmQueryEntry 5}
asamAlarmQueryLocation OBJECT-TYPE
SYNTAX AsamAlarmLocation
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in alarm location. It is only suitable for various DSL alarms
1-near-end, 2-far-end, 3-middle-end, 4-line, 5-null
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmQueryEntry 6}
asamAlarmQueryDirection OBJECT-TYPE
SYNTAX AsamAlarmDirection
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in alarm direction. It is only suitable for various DSL alarms.
1-received, 2-transmit, 3-null
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmQueryEntry 7}
asamAlarmQueryTime OBJECT-TYPE
SYNTAX NetworkTimeInSeconds
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object gives the time in seconds when the last alarm has
changed state (either raised or cleared).
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: seconds"
::= {asamAlarmQueryEntry 8}
asamAlarmQueryAidInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to show AID parameter in string
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmQueryEntry 9}
asamAlarmQueryInfo OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used to keep some additional information about
the queried alarm.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmQueryEntry 10}
asamAlarmQueryIndex1 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index2. Together they
identify where the alarm occurred. For more information regarding
the index definition, refer to the Alarm Definition document.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmQueryEntry 11}
asamAlarmQueryIndex2 OBJECT-TYPE
SYNTAX INTEGER (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object is used in conjunction with Index1. See description of
Index1 for further info.
ALCATEL NOTE:
SUPPORT: YES INSRVMOD: NA RANGE: See above
PERSIST: NO DEFVALUE: NA UNITS: -"
::= {asamAlarmQueryEntry 12}
END