mibs/MIBS/nokia/TIMETRA-SDP-MIB

14691 lines
513 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
TIMETRA-SDP-MIB DEFINITIONS ::= BEGIN
IMPORTS
InterfaceIndexOrZero
FROM IF-MIB
InetAddress, InetAddressType
FROM INET-ADDRESS-MIB
MODULE-COMPLIANCE, NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
Counter32, Counter64, Gauge32,
Integer32, IpAddress, MODULE-IDENTITY,
NOTIFICATION-TYPE, OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
DisplayString, MacAddress, RowStatus,
TimeStamp, TruthValue
FROM SNMPv2-TC
tmnxCardSlotNum, tmnxChassisIndex,
tmnxMDASlotNum
FROM TIMETRA-CHASSIS-MIB
TConfigOrVsdFilterID, TFilterID
FROM TIMETRA-FILTER-MIB
timetraSRMIBModules
FROM TIMETRA-GLOBAL-MIB
BridgeId, ConfigStatus, L2ptProtocols,
LspIdList, MvplsPruneState,
PWTemplateId, SdpBindBandwidth,
SdpBindVcType, SdpId, ServObjDesc,
ServObjName, StpExceptionCondition,
StpPortRole, StpProtocol, TStpPortState,
TdmOptionsCasTrunkFraming,
TdmOptionsSigPkts, TlsBpduTranslation,
TlsLimitMacMove, TlsLimitMacMoveLevel,
TmnxSiteId, VpnId, custId,
protectedMacForNotify,
svcDhcpClientLease, svcDhcpCoAError,
svcDhcpLseStateNewChAddr,
svcDhcpLseStateNewCiAddr,
svcDhcpLseStateOldChAddr,
svcDhcpLseStateOldCiAddr,
svcDhcpLseStatePopulateError,
svcDhcpPacketProblem, svcDhcpProxyError,
svcDhcpSubAuthError, svcId,
svcTlsBackboneVplsSvcId,
svcTlsMacMoveMaxRate,
svcTlsStpDesignatedRoot, svcVpnId,
tlsDhcpPacketProblem, tlsFdbType,
tmnxCustomerBridgeId,
tmnxCustomerRootBridgeId,
tmnxOldSdpBindTlsStpPortState,
tmnxOtherBridgeId, tmnxServConformance,
tmnxServNotifications, tmnxServObjs,
tmnxSvcObjs, tstpTraps
FROM TIMETRA-SERV-MIB
AluNgeKeygroupIdOrZero, SdpBindId,
ServiceAdminStatus, TCpmProtPolicyID,
TFCSet, TItemDescription,
TLNamedItemOrEmpty, TNamedItem,
TNamedItemOrEmpty,
TPolicyStatementNameOrEmpty,
TQosQGrpInstanceIDorZero,
TSdpEgressPolicyID, TSdpIngressPolicyID,
TmnxActionType, TmnxAdminState,
TmnxAdminStateTruthValue, TmnxBfdEncap,
TmnxBfdSessOperState,
TmnxBsxAarpIdOrZero,
TmnxBsxAarpServiceRefType,
TmnxBsxTransPrefPolicyIdOrZero,
TmnxBsxTransitIpPolicyIdOrZero,
TmnxCreateOrigin, TmnxCustId,
TmnxEnabledDisabled,
TmnxEnabledDisabledAdminState,
TmnxEvpnMHEthSegStatus, TmnxISID,
TmnxIgmpVersion, TmnxIsidMFibStatus,
TmnxMplsTpGlobalID, TmnxMplsTpNodeID,
TmnxOperState, TmnxPortID,
TmnxPwGlobalId, TmnxServId,
TmnxSpokeSdpIdOrZero,
TmnxVPNRouteDistinguisher,
TmnxVRtrMplsLspID,
TmnxVRtrMplsLspIDNoZero, TmnxVcId,
TmnxVcIdOrNone
FROM TIMETRA-TC-MIB
;
timetraServicesSdpMIBModule MODULE-IDENTITY
LAST-UPDATED "201605140000Z"
ORGANIZATION "Nokia"
CONTACT-INFO
"Nokia SROS Support
Web: http://www.nokia.com"
DESCRIPTION
"This document is the SNMP MIB module to manage and provision the
various services of the Nokia SROS system.
Copyright 2003-2018 Nokia. All rights reserved. Reproduction of this
document is authorized on the condition that the foregoing copyright
notice is included.
This SNMP MIB module (Specification) embodies Nokia's
proprietary intellectual property. Nokia retains
all title and ownership in the Specification, including any
revisions.
Nokia grants all interested parties a non-exclusive license to use and
distribute an unmodified copy of this Specification in connection with
management of Nokia products, and without fee, provided this copyright
notice and license appear on all copies.
This Specification is supplied 'as is', and Nokia makes no warranty,
either express or implied, as to the use, operation, condition, or
performance of the Specification."
REVISION "201605140000Z"
DESCRIPTION
"Rev 15.0 14 May 2016 00:00
15.0 release of the TIMETRA-SDP-MIB."
REVISION "201602010000Z"
DESCRIPTION
"Rev 14.0 1 Feb 2016 00:00
14.0 release of the TIMETRA-SDP-MIB."
REVISION "201501010000Z"
DESCRIPTION
"Rev 13.0 1 Jan 2015 00:00
13.0 release of the TIMETRA-SDP-MIB."
REVISION "201401010000Z"
DESCRIPTION
"Rev 12.0 1 Jan 2014 00:00
12.0 release of the TIMETRA-SDP-MIB."
REVISION "201102010000Z"
DESCRIPTION
"Rev 9.0 1 Feb 2011 00:00
9.0 release of the TIMETRA-SDP-MIB."
REVISION "200902280000Z"
DESCRIPTION
"Rev 7.0 28 Feb 2009 00:00
7.0 release of the TIMETRA-SDP-MIB."
REVISION "200807010000Z"
DESCRIPTION
"Rev 6.1 01 Jul 2008 00:00
6.1 release of the TIMETRA-SDP-MIB."
REVISION "200710010000Z"
DESCRIPTION
"Rev 1.0 01 Oct 2007 00:00
1.0 release of the TIMETRA-SDP-MIB from TIMETRA-SERV-MIB."
::= { timetraSRMIBModules 56 }
tmnxSdpObjs OBJECT IDENTIFIER ::= { tmnxServObjs 4 }
sdpNumEntries OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of SDPs configured in this device."
::= { tmnxSdpObjs 1 }
sdpNextFreeId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The next available value for sdpId."
::= { tmnxSdpObjs 2 }
sdpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains SDP information."
::= { tmnxSdpObjs 3 }
sdpInfoEntry OBJECT-TYPE
SYNTAX SdpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific SDP."
INDEX { sdpId }
::= { sdpInfoTable 1 }
SdpInfoEntry ::= SEQUENCE
{
sdpId SdpId,
sdpRowStatus RowStatus,
sdpDelivery INTEGER,
sdpFarEndIpAddress IpAddress,
sdpLspList LspIdList,
sdpDescription ServObjDesc,
sdpLabelSignaling INTEGER,
sdpAdminStatus ServiceAdminStatus,
sdpOperStatus INTEGER,
sdpAdminPathMtu Integer32,
sdpOperPathMtu Integer32,
sdpKeepAliveAdminStatus TmnxEnabledDisabledAdminState,
sdpKeepAliveOperStatus INTEGER,
sdpKeepAliveHelloTime Integer32,
sdpKeepAliveMaxDropCount Integer32,
sdpKeepAliveHoldDownTime Integer32,
sdpLastMgmtChange TimeStamp,
sdpKeepAliveHelloMessageLength Integer32,
sdpKeepAliveNumHelloRequestMessages Unsigned32,
sdpKeepAliveNumHelloResponseMessages Unsigned32,
sdpKeepAliveNumLateHelloResponseMessages Unsigned32,
sdpKeepAliveHelloRequestTimeout Integer32,
sdpLdpEnabled TruthValue,
sdpVlanVcEtype Unsigned32,
sdpAdvertisedVllMtuOverride TruthValue,
sdpOperFlags BITS,
sdpLastStatusChange TimeStamp,
sdpMvplsMgmtService TmnxServId,
sdpMvplsMgmtSdpBndId SdpBindId,
sdpCollectAcctStats TruthValue,
sdpAccountingPolicyId Unsigned32,
sdpClassFwdingEnabled TmnxAdminStateTruthValue,
sdpClassFwdingDefaultLsp TmnxVRtrMplsLspID,
sdpClassFwdingMcLsp TmnxVRtrMplsLspID,
sdpMetric Unsigned32,
sdpAutoSdp TruthValue,
sdpSnmpAllowed TruthValue,
sdpPBBEtype Unsigned32,
sdpBandwidthBookingFactor Unsigned32,
sdpOperBandwidth Unsigned32,
sdpAvailableBandwidth Unsigned32,
sdpMaxBookableBandwidth Unsigned32,
sdpBookedBandwidth Unsigned32,
sdpCreationOrigin TmnxCreateOrigin,
sdpEnforceDiffServLspFc TruthValue,
sdpMixedLspModeEnabled TruthValue,
sdpLspRevertTime Integer32,
sdpLspRevertTimeCountDown Integer32,
sdpLdpLspId Unsigned32,
sdpLdpActive TruthValue,
sdpNetDomainName TNamedItemOrEmpty,
sdpEgressIfsNetDomainConsistent INTEGER,
sdpBgpTunnelEnabled TruthValue,
sdpBgpTunnelLspId Unsigned32,
sdpTunnelFarEndIpAddress IpAddress,
sdpActiveLspType INTEGER,
sdpBindingPort TmnxPortID,
sdpFarEndNodeId TmnxMplsTpNodeID,
sdpFarEndGlobalId TmnxMplsTpGlobalID,
sdpFarEndInetAddressType InetAddressType,
sdpFarEndInetAddress InetAddress,
sdpLocalEndInetAddressType InetAddressType,
sdpLocalEndInetAddress InetAddress,
sdpSourceBMacLSB Unsigned32,
sdpControlPWVCId TmnxVcIdOrNone,
sdpControlPWIsActive TruthValue,
sdpTunnelFarEndInetAddressType InetAddressType,
sdpTunnelFarEndInetAddress InetAddress,
sdpGreAllowFragmentation TruthValue,
sdpFpeLspId Unsigned32,
sdpWeightedEcmpEnabled TruthValue,
sdpOperTunnelFarEndInetAddrType InetAddressType,
sdpOperTunnelFarEndInetAddr InetAddress
}
sdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SDP identifier."
::= { sdpInfoEntry 1 }
sdpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the status of this row. The only values
supported during a set operation are 'createAndGo' and 'destroy'. To
delete an entry from this table, the corresponding SDP must be
administratively down, not bound to any service, and not in use as a
mirror destination."
::= { sdpInfoEntry 2 }
sdpDelivery OBJECT-TYPE
SYNTAX INTEGER {
gre (1),
mpls (2),
l2tpv3 (4),
greethbridged (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the type of delivery used by this SDP. The value
of this object must be specified when the row is created and cannot be
changed while the row status is 'active'."
::= { sdpInfoEntry 3 }
sdpFarEndIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"This object specifies the IP address of the remote end of the GRE or
MPLS tunnel defined by this SDP. If sdpTunnelFarEndIpAddress is not
set, then sdpFarEndIpAddress also specifies the remote end of the TLDP
session.
The value of this object must be set to a non-default value when the
sdpDelivery is set to 'gre' or 'mpls' for the row to become 'active',
and can only be changed while the admin status of the SDP is 'down'.
The sdpFarEndIpAddress is obsoleted and replaced with
sdpFarEndInetAddressType and sdpFarEndInetAddress objects."
DEFVAL { 0 }
::= { sdpInfoEntry 4 }
sdpLspList OBJECT-TYPE
SYNTAX LspIdList
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"When the SDP delivery specified by sdpDelivery is 'mpls', this object
specifies the list of LSPs used to reach the far-end ESR device.
All the LSPs in this list must terminate at the IP address specified
by sdpFarEndIpAddress or sdpFarEndNodeId (for sdpDelivery of 'mpls').
This object is otherwise insignificant and should contain a value of
0.
When this list has more than one element, the Nokia SROS router will
use all of the LSPs for load balancing purposes. Each LSP ID in the
list corresponds to the vRtrMplsLspIndex of the given MPLS LSP."
::= { sdpInfoEntry 5 }
sdpDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Generic information about this SDP."
DEFVAL { "" }
::= { sdpInfoEntry 6 }
sdpLabelSignaling OBJECT-TYPE
SYNTAX INTEGER {
none (1),
tldp (2),
bgp (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the signaling protocol used to obtain the
ingress and egress labels used in frames transmitted and received on
this SDP. When the value of this object is 'none' then the labels are
manually assigned at the time the SDP is bound to a service. The value
of this object can only be changed while the admin status of the SDP
is 'down'.
An 'inconsistentValue' error is returned if this object is not set to
'none' when sdpDelivery is set to 'mpls'.
An 'inconsistentValue' error is returned if this object is not set to
'none' when sdpDelivery is set to 'l2tpv3'.
Default value of this object is set to 'none' when sdpDelivery is set
to 'l2tpv3' otherwise default value for this object is set to 'tldp'."
::= { sdpInfoEntry 7 }
sdpAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state of this SDP."
DEFVAL { down }
::= { sdpInfoEntry 8 }
sdpOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
notAlive (2),
notReady (3),
invalidEgressInterface (4),
transportTunnelDown (5),
down (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating state of this SDP. The value 'notAlive' is valid only
when keep-alive is enabled, and it means that the keep-alive operating
status is not alive. The value 'notReady' is valid only when this SDP
uses a label signaling protocol (e.g. TLDP) and it means that the
signaling session with the far-end peer has not been established. The
value 'invalidEgressInterface' indicates that the IOMs have detected
that the egress interface towards the far-end device is not a network
port."
::= { sdpInfoEntry 9 }
sdpAdminPathMtu OBJECT-TYPE
SYNTAX Integer32 (0 | 576..9782)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the desired largest service frame size (in
octets) that can be transmitted through this SDP to the far-end ESR,
without requiring the packet to be fragmented. The default value of
zero indicates that the path MTU should be computed dynamically from
the corresponding MTU of the tunnel."
DEFVAL { 0 }
::= { sdpInfoEntry 10 }
sdpOperPathMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the actual largest service frame size (in
octets) that can be transmitted through this SDP to the far-end ESR,
without requiring the packet to be fragmented. In order to be able to
bind this SDP to a given service, the value of this object minus the
control word size (if applicable) must be equal to or larger than the
MTU of the service, as defined by its svcMtu."
::= { sdpInfoEntry 11 }
sdpKeepAliveAdminStatus OBJECT-TYPE
SYNTAX TmnxEnabledDisabledAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to enable or disable the keep-alive protocol used
to determine the operating status of this SDP."
DEFVAL { disabled }
::= { sdpInfoEntry 12 }
sdpKeepAliveOperStatus OBJECT-TYPE
SYNTAX INTEGER {
alive (1),
noResponse (2),
senderIdInvalid (3),
responderIdError (4),
disabled (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current status of the keep-alive protocol. The value 'alive'
indicates that the far-end ESR is replying the SDP Echo Requests
messages sent by this device indicating no error condition. The value
'noResponse' indicates that the number of consecutive SDP Echo Request
messages unacknowledged by the far-end ESR exceeded the limit defined
by sdpKeepAliveMaxDropCount. The values 'senderIdInvalid' and
'responderIdError' are two error conditions detected by the far-end
ESR. The value 'disabled' indicates that the keep-alive protocol is
not enabled."
::= { sdpInfoEntry 13 }
sdpKeepAliveHelloTime OBJECT-TYPE
SYNTAX Integer32 (1..3600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how often the SDP Echo Request messages are
transmitted on this SDP."
DEFVAL { 10 }
::= { sdpInfoEntry 14 }
sdpKeepAliveMaxDropCount OBJECT-TYPE
SYNTAX Integer32 (1..5)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the maximum number of consecutive SDP Echo
Request messages that can be unacknowledged before the keep-alive
protocol reports a fault."
DEFVAL { 3 }
::= { sdpInfoEntry 15 }
sdpKeepAliveHoldDownTime OBJECT-TYPE
SYNTAX Integer32 (0..3600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the amount of time to wait before the keep-alive
operating status is eligible to enter the 'alive' state."
DEFVAL { 10 }
::= { sdpInfoEntry 16 }
sdpLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the most recent
management-initiated change to this SDP."
::= { sdpInfoEntry 17 }
sdpKeepAliveHelloMessageLength OBJECT-TYPE
SYNTAX Integer32 (0 | 40..9198)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the length of the SDP Echo Request messages
transmitted on this SDP. The default value of zero indicates that the
message length should be equal to the SDP's operating path MTU, as
specified by sdpOperPathMtu. When the default value is overridden, the
message length is sdpKeepAliveHelloMessageLength."
DEFVAL { 0 }
::= { sdpInfoEntry 18 }
sdpKeepAliveNumHelloRequestMessages OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SDP Echo Request messages transmitted since the
keep-alive was administratively enabled or the counter was cleared."
::= { sdpInfoEntry 19 }
sdpKeepAliveNumHelloResponseMessages OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SDP Echo Response messages received since the keep-alive
was administratively enabled or the counter was cleared."
::= { sdpInfoEntry 20 }
sdpKeepAliveNumLateHelloResponseMessages OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SDP Echo Response messages received after the
corresponding Request timeout timer expired."
::= { sdpInfoEntry 21 }
sdpKeepAliveHelloRequestTimeout OBJECT-TYPE
SYNTAX Integer32 (1..10)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of seconds to wait for an SDP Echo Response message before
declaring a timeout."
DEFVAL { 5 }
::= { sdpInfoEntry 22 }
sdpLdpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of this object is 'true' the transport LSPs are
signalled by LDP, as opposed to being provisioned static or
RSVP-signalled LSPs. This object applies only to MPLS SDPs."
DEFVAL { false }
::= { sdpInfoEntry 23 }
sdpVlanVcEtype OBJECT-TYPE
SYNTAX Unsigned32 (1536..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the Ethertype used in frames sent out this SDP,
when the VC type is vlan."
DEFVAL { '8100'H }
::= { sdpInfoEntry 24 }
sdpAdvertisedVllMtuOverride OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When the value of this object is 'true' the advertised MTU of a VLL
spoke SDP bind includes the 14-byte L2 header, so that it is backward
compatible with pre-2.0 software."
DEFVAL { false }
::= { sdpInfoEntry 25 }
sdpOperFlags OBJECT-TYPE
SYNTAX BITS {
sdpAdminDown (0),
signalingSessionDown (1),
transportTunnelDown (2),
keepaliveFailure (3),
invalidEgressInterface (4),
noSystemIpAddress (5),
transportTunnelUnstable (6),
notOnBindingPort (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates all the conditions that affect the operating
status of this SDP."
::= { sdpInfoEntry 26 }
sdpLastStatusChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the most recent operating status
change to this SDP."
::= { sdpInfoEntry 27 }
sdpMvplsMgmtService OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpMvplsMgmtService indicates the service Id of the
service where the STP instance is running that is managing this SDP.
This object is only valid if sdpMvplsMgmtService is different from 0."
::= { sdpInfoEntry 28 }
sdpMvplsMgmtSdpBndId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpMvplsMgmtSdpBndId indicates which SDP bind in the
mVPLS instance specified in sdpMvplsMgmtService is controlling this
SDP. This object is only valid if sdpMvplsMgmtService is different
from 0."
::= { sdpInfoEntry 29 }
sdpCollectAcctStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpCollectAcctStats specifies whether the
agent collects accounting statistics for this SDP. When the value is
'true' the agent collects accounting statistics on this SDP."
DEFVAL { false }
::= { sdpInfoEntry 30 }
sdpAccountingPolicyId OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpAccountingPolicyId specifies the policy to use to
collect accounting statistics on this SDP. The value zero indicates
that the agent should use the default accounting policy, if one
exists."
DEFVAL { 0 }
::= { sdpInfoEntry 31 }
sdpClassFwdingEnabled OBJECT-TYPE
SYNTAX TmnxAdminStateTruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpClassFwdingEnabled specifies the admin state of
class-based forwarding on this SDP. When the value is 'true',
class-based forwarding is enabled."
DEFVAL { false }
::= { sdpInfoEntry 32 }
sdpClassFwdingDefaultLsp OBJECT-TYPE
SYNTAX TmnxVRtrMplsLspID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpClassFwdingDefaultLsp specifies the LSP ID that is
used as a default when class-based forwarding is enabled on this SDP.
This object must be set when enabling class-based forwarding."
DEFVAL { 0 }
::= { sdpInfoEntry 33 }
sdpClassFwdingMcLsp OBJECT-TYPE
SYNTAX TmnxVRtrMplsLspID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpClassFwdingMcLsp specifies the LSP ID that all
multicast traffic will be forwarded on when class-based forwarding is
enabled on this SDP. When this object has its default value, multicast
traffic will be forwarded on an LSP according to its forwarding class
mapping."
DEFVAL { 0 }
::= { sdpInfoEntry 34 }
sdpMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpMetric specifies the metric to be used within the
Tunnel Table Manager for decision making purposes. When multiple SDPs
going to the same destination exist, this value is used as a
tiebreaker by Tunnel Table Manager users like MP-BGP to select route
with lower value."
DEFVAL { 0 }
::= { sdpInfoEntry 35 }
sdpAutoSdp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAutoSdp indicates whether this is an Auto generated
SDP from RADIUS discovery or BGP auto-discovery."
::= { sdpInfoEntry 36 }
sdpSnmpAllowed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of sdpSnmpAllowed indicates if SNMP sets are allowed on this
SDP."
::= { sdpInfoEntry 37 }
sdpPBBEtype OBJECT-TYPE
SYNTAX Unsigned32 (1536..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the Ethertype used in frames sent out on this
SDP when sdpBindVcType is 'vlan' for Provider Backbone Bridging
frames."
DEFVAL { '88E7'H }
::= { sdpInfoEntry 38 }
sdpBandwidthBookingFactor OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"sdpBandwidthBookingFactor is used to calculate the max
SDP available bandwidth. The value of
sdpBandwidthBookingFactor specifies the percentage of the
SDP max available bandwidth for VLL call admission. When
the value of sdpBandwidthBookingFactor is set to zero (0),
no new VLL spoke-sdp bindings with non-zero bandwidth are
permitted with this SDP. Overbooking, >100% is allowed."
DEFVAL { 100 }
::= { sdpInfoEntry 39 }
sdpOperBandwidth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpOperBandwidth indicates the operational Bandwidth in
kilobits per seconds (Kbps) available for this SDP. The value
sdpOperBandwidth is determined by the sum of the bandwidth of all the
RSVP LSPs used by the SDP."
::= { sdpInfoEntry 40 }
sdpAvailableBandwidth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAvailableBandwidth indicates the Bandwidth that is
still free for booking by the SDP bindings on the SDP."
::= { sdpInfoEntry 41 }
sdpMaxBookableBandwidth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of sdpMaxBookableBandwidth indicates the max Bandwidth that
the SDP has for booking by the SDP bindings. The value of
sdpMaxBookableBandwidth is calculated as follow:
sdpMaxBookableBandwidth = sdpOperBandwidth *
sdpBandwidthBookingFactor"
::= { sdpInfoEntry 42 }
sdpBookedBandwidth OBJECT-TYPE
SYNTAX Unsigned32
UNITS "kilobps"
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of sdpBookedBandwidth indicates the SDP Bandwidth that has
been booked by the SDP bindings."
::= { sdpInfoEntry 43 }
sdpCreationOrigin OBJECT-TYPE
SYNTAX TmnxCreateOrigin
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpCreationOrigin indicates the protocol or mechanism
which created this SDP."
::= { sdpInfoEntry 44 }
sdpEnforceDiffServLspFc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpEnforceDiffServLspFc specifies whether service manager
must validate with RSVP the support of the FC by the LSP.
By default, the SDP uses the direct configuration without validation
with RSVP. "
DEFVAL { false }
::= { sdpInfoEntry 45 }
sdpMixedLspModeEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpMixedLspModeEnabled specifies whether
mixed mode LSPs is enabled on this SDP. Setting the
value to 'true' allows LDP to be enabled and LSPs to
be configured at the same time on this SDP."
DEFVAL { false }
::= { sdpInfoEntry 46 }
sdpLspRevertTime OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpLspRevertTime specifies the time to wait before
reverting back from LDP to the configured LSPs, after having failed
over to LDP.
When the value is -1, the sdp will never revert back."
DEFVAL { 0 }
::= { sdpInfoEntry 47 }
sdpLspRevertTimeCountDown OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..600)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpLspRevertTimeCountDown indicated the timer countdown
before reverting back from LDP on this SDP. The timer countdown begins
after the first configured LSP becomes active.
The value of -1 indicates when the revert time countdown is not
applicable."
::= { sdpInfoEntry 48 }
sdpLdpLspId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpLdpLspId indicates the Id for the LDP LSP if
sdpLdpEnabled is set to 'true' and there is a valid LDP route to the
sdpFarEndIpAddress or sdpFarEndNodeId."
::= { sdpInfoEntry 49 }
sdpLdpActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The value of sdpLdpActive indicates whether LDP is active for the
current SDP."
::= { sdpInfoEntry 50 }
sdpNetDomainName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpNetDomainName specifies the network-domain name this
SDP is associated with. The network-domain defines the list of network
interfaces this SDP can send traffic on.
The default value of this object is the 'default' network-domain."
DEFVAL { "default" }
::= { sdpInfoEntry 51 }
sdpEgressIfsNetDomainConsistent OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
consistent (2),
inconsistent (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpEgressIfsNetDomainConsistent indicates whether all the
egress network interfaces that can carry traffic on this SDP are
associated with the network-domain configured on this SDP.
A value of 'notApplicable' indicates that there is no egress network
interface that can carry traffic on this SDP.
A value of 'consistent' indicates that the network-domains for all the
egress network interfaces that can carry traffic on this SDP are
consistent.
A value of 'inconsistent' indicates that the network-domain for one or
more egress network interfaces that can carry traffic on this SDP are
inconsistent."
::= { sdpInfoEntry 52 }
sdpBgpTunnelEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBgpTunnelEnabled specifies whether the transport
tunnel is BGP as opposed to LDP or RSVP signalled LSPs.
This value cannot be set to 'true' if sdpLdpEnabled is 'true' or if
there is at least one RSVP or static LSP provisioned.
This object applies to MPLS SDPs."
DEFVAL { false }
::= { sdpInfoEntry 53 }
sdpBgpTunnelLspId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBgpTunnelLspId indicates the Id for the BGP Tunnel LSP
if sdpBgpTunnelEnabled is set to 'true' and there is a valid LDP route
to the sdpFarEndIpAddress."
::= { sdpInfoEntry 54 }
sdpTunnelFarEndIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of sdpTunnelFarEndIpAddress specifies the IP address of the
remote end of the transport tunnel for this SDP.
The value can only be changed while the admin status of the SDP is
'down'.
The sdpTunnelFarEndIpAddress is obsoleted and replaced with
sdpTunnelFarEndInetAddressType and sdpTunnelFarEndInetAddress objects."
::= { sdpInfoEntry 55 }
sdpActiveLspType OBJECT-TYPE
SYNTAX INTEGER {
not-applicable (0),
rsvp (1),
ldp (2),
bgp (3),
none (4),
mplsTp (5),
srIsis (6),
srOspf (7),
srTeLsp (8),
fpe (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpActiveLspType indicates the type of LSP that is
currently active on this SDP.
For sdpDelivery 'gre', the value is always 'not-applicable'.
For sdpDelivery 'mpls', the values can be 'rsvp', 'ldp', 'mplsTp',
'srIsis', 'srOspf', 'srTeLsp', 'fpe', 'bgp' or 'none'."
::= { sdpInfoEntry 56 }
sdpBindingPort OBJECT-TYPE
SYNTAX TmnxPortID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindingPort specifies the port id for the binding on
this SDP.
The value of sdpPwPortOperStatus will be set to 'down' of all the
related SDP pseudo-wire ports, if the SDP resolves to another port
than the one specified here.
An 'inconsistentValue' error is returned when this object is set to a
non-default value when sdpDelivery is set to 'gre'."
DEFVAL { '1e000000'H }
::= { sdpInfoEntry 57 }
sdpFarEndNodeId OBJECT-TYPE
SYNTAX TmnxMplsTpNodeID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpFarEndNodeId specifies the node identifier of the
far-end for this sdp.
The value of this object must be set to a non-default value when the
sdpDelivery is set to 'mpls' for the row to become 'active', and can
only be changed while the admin status of the SDP is 'down'."
DEFVAL { 0 }
::= { sdpInfoEntry 58 }
sdpFarEndGlobalId OBJECT-TYPE
SYNTAX TmnxMplsTpGlobalID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpFarEndGlobalId specifies the global identifier of the
far-end for this sdp."
DEFVAL { 0 }
::= { sdpInfoEntry 59 }
sdpFarEndInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpFarEndInetAddressType specifies the address
type of sdpFarEndInetAddress."
DEFVAL { unknown }
::= { sdpInfoEntry 60 }
sdpFarEndInetAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpFarEndInetAddress object specifies the IP address of
the remote end of the tunnel defined by this SDP."
DEFVAL { ''H }
::= { sdpInfoEntry 61 }
sdpLocalEndInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpLocalEndInetAddressType specifies the
address type of sdpLocalEndInetAddress."
DEFVAL { unknown }
::= { sdpInfoEntry 62 }
sdpLocalEndInetAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpLocalEndInetAddress object specifies the IP address of
the local end of the tunnel defined by this SDP.
An 'inconsistentValue' error is returned when sdpLocalEndInetAddress
is set to non-default and sdpDelivery is not set to 'l2tpv3' or 'gre'."
DEFVAL { ''H }
::= { sdpInfoEntry 63 }
sdpSourceBMacLSB OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpSourceBMacLSB specifies the 16 least significant bits
(lsb) which when combined with the 32 most significant bits of the PBB
source-bmac specified by svcPbbSrcBVplsMacAddr, forms the virtual
backbone MAC associated with this SDP.
The virtual backbone MAC is used as the source backbone MAC for
traffic received on a PBB EPIPE spoke-SDP with the value of
sdpBindUseSdpBMac set to 'true (1)' (i.e. redundant pseudo-wire) and
forwarded into the B-VPLS domain.
An 'inconsistentValue' error is returned if the value of
sdpSourceBMacLSB is set to non-default value when the value of
sdpControlPWVCId is set to default value."
DEFVAL { 0 }
::= { sdpInfoEntry 64 }
sdpControlPWVCId OBJECT-TYPE
SYNTAX TmnxVcIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpControlPWVCId specifies the spoke-SDP VC identifier to
be used as a control pseudo-wire to determine whether Shortest Path
Bridging Module (SPBM) advertises the virtual backbone MAC.
An 'inconsistentValue' error is returned if the value of
sdpControlPWVCId is set to non-default value when the value of
sdpSourceBMacLSB is set to default value."
DEFVAL { 0 }
::= { sdpInfoEntry 65 }
sdpControlPWIsActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpControlPWIsActive indicates whether control
pseudo-wire is considered active on the Backbone Edge Bridge (BEB)."
::= { sdpInfoEntry 66 }
sdpTunnelFarEndInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpTunnelFarEndInetAddressType specifies the address type
of sdpTunnelFarEndInetAddress."
DEFVAL { unknown }
::= { sdpInfoEntry 67 }
sdpTunnelFarEndInetAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpTunnelFarEndInetAddress specifies the IP address of
the remote end of the transport tunnel for this SDP.
This address must be different from sdpFarEndInetAddress.
The value can only be changed while the admin status of the SDP is
'down'."
DEFVAL { ''H }
::= { sdpInfoEntry 68 }
sdpGreAllowFragmentation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpGreAllowFragmentation specifies whether to allow GRE
encapsulated packets to be sent without setting the DF bit for this
SDP.
This object is valid only when sdpDelivery is set to 'gre'."
DEFVAL { false }
::= { sdpInfoEntry 69 }
sdpFpeLspId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpFpeLspId indicates the identifier for the
forward-path-extension LSP when the SDP is created using 'fpe'."
::= { sdpInfoEntry 70 }
sdpWeightedEcmpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpWeightedEcmpEnabled specifies the packets forwarded to
a set of ECMP tunnel next-hops which will be sprayed proportionally to
the load balancing weights configured for each LSP."
DEFVAL { false }
::= { sdpInfoEntry 71 }
sdpOperTunnelFarEndInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpOperTunnelFarEndInetAddrType indicates the address
type of sdpOperTunnelFarEndInetAddr."
::= { sdpInfoEntry 72 }
sdpOperTunnelFarEndInetAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpOperTunnelFarEndInetAddr indicates the operational IP
address of the remote end of the transport tunnel for this SDP.
If sdpTunnelFarEndInetAddress is not set, it will take the value from
sdpFarEndInetAddress."
::= { sdpInfoEntry 73 }
sdpBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains SDP binding information."
::= { tmnxSdpObjs 4 }
sdpBindEntry OBJECT-TYPE
SYNTAX SdpBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific SDP binding."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindTable 1 }
SdpBindEntry ::= SEQUENCE
{
sdpBindId SdpBindId,
sdpBindRowStatus RowStatus,
sdpBindAdminIngressLabel Unsigned32,
sdpBindAdminEgressLabel Unsigned32,
sdpBindOperIngressLabel Unsigned32,
sdpBindOperEgressLabel Unsigned32,
sdpBindAdminStatus ServiceAdminStatus,
sdpBindOperStatus INTEGER,
sdpBindLastMgmtChange TimeStamp,
sdpBindType INTEGER,
sdpBindIngressMacFilterId TConfigOrVsdFilterID,
sdpBindIngressIpFilterId TConfigOrVsdFilterID,
sdpBindEgressMacFilterId TFilterID,
sdpBindEgressIpFilterId TFilterID,
sdpBindVpnId VpnId,
sdpBindCustId TmnxCustId,
sdpBindVcType SdpBindVcType,
sdpBindVlanVcTag Unsigned32,
sdpBindSplitHorizonGrp ServObjName,
sdpBindOperFlags BITS,
sdpBindLastStatusChange TimeStamp,
sdpBindIesIfIndex InterfaceIndexOrZero,
sdpBindMacPinning TmnxEnabledDisabled,
sdpBindIngressIpv6FilterId TConfigOrVsdFilterID,
sdpBindEgressIpv6FilterId TFilterID,
sdpBindCollectAcctStats TruthValue,
sdpBindAccountingPolicyId Unsigned32,
sdpBindPwPeerStatusBits BITS,
sdpBindPeerVccvCvBits BITS,
sdpBindPeerVccvCcBits BITS,
sdpBindControlWordBit TruthValue,
sdpBindOperControlWord TruthValue,
sdpBindEndPoint ServObjName,
sdpBindEndPointPrecedence Unsigned32,
sdpBindIsICB TruthValue,
sdpBindPwFaultInetAddressType InetAddressType,
sdpBindPwFaultInetAddress InetAddress,
sdpBindClassFwdingOperState TmnxOperState,
sdpBindForceVlanVcForwarding TruthValue,
sdpBindAdminBandwidth SdpBindBandwidth,
sdpBindOperBandwidth SdpBindBandwidth,
sdpBindCreationOrigin TmnxCreateOrigin,
sdpBindDescription TItemDescription,
sdpBindSiteName TNamedItemOrEmpty,
sdpBindHashLabel TruthValue,
sdpBindIsaAaApplicationProfile ServObjName,
sdpBindStandbySigSlave TruthValue,
sdpBindHashLabelSignalCapability TruthValue,
sdpBindIngressFlowspec TruthValue,
sdpBindCpmProtPolicyId TCpmProtPolicyID,
sdpBindCpmProtMonitorMac TruthValue,
sdpBindCpmProtEthCfmMonitorFlags BITS,
sdpBindTransitIpPolicyId TmnxBsxTransitIpPolicyIdOrZero,
sdpBindPwStatusSignaling TruthValue,
sdpBindOperGrp TNamedItemOrEmpty,
sdpBindMonitorOperGrp TNamedItemOrEmpty,
sdpBindOperHashLabel TruthValue,
sdpBindTransitPrefixPolicyId TmnxBsxTransPrefPolicyIdOrZero,
sdpBindAarpId TmnxBsxAarpIdOrZero,
sdpBindIngressQoSNetworkPlcyId TSdpIngressPolicyID,
sdpBindEgressQoSNetworkPlcyId TSdpEgressPolicyID,
sdpBindIngressQoSFpRedirectQGrp TNamedItemOrEmpty,
sdpBindEgressQoSPortRedirectQGrp TNamedItemOrEmpty,
sdpBindIngressQoSInstanceId TQosQGrpInstanceIDorZero,
sdpBindEgressQoSInstanceId TQosQGrpInstanceIDorZero,
sdpBindAarpServRefType TmnxBsxAarpServiceRefType,
sdpBindPwLocalStatusBits BITS,
sdpBindBlockOnPeerFault TruthValue,
sdpBindIngressIPv6Flowspec TruthValue,
sdpBindMirrorRemoteSource TruthValue,
sdpBindEtreeRootLeafTag TruthValue,
sdpBindCpmProtMonitorIP TruthValue,
sdpBindUseSdpBMac TruthValue,
sdpBindEtreeLeafAc TruthValue,
sdpBindBfdTemplateName TNamedItemOrEmpty,
sdpBindBfdEnable TruthValue,
sdpBindBfdEncap TmnxBfdEncap,
sdpBindForceQinqVcForwarding TruthValue,
sdpBindIngressVlanTranslation INTEGER,
sdpBindIngressVlanTranslationId Integer32,
sdpBindMinReqdSdpOperMtu Integer32,
sdpBindForceQinqVcFwding INTEGER,
sdpBindMulticastSource TruthValue
}
sdpBindId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SDP Binding identifier."
::= { sdpBindEntry 1 }
sdpBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the status of this row. The only values
supported during a set operation are 'createAndGo' and 'destroy'."
::= { sdpBindEntry 2 }
sdpBindAdminIngressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The static MPLS VC label used by the far-end device to send packets to
this device in this service via this SDP.
Normal range of (2048..18431) is used unless changed by the user."
DEFVAL { 0 }
::= { sdpBindEntry 3 }
sdpBindAdminEgressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 16..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The static MPLS VC label used by this device to send packets to the
far-end device in this service via this SDP."
DEFVAL { 0 }
::= { sdpBindEntry 4 }
sdpBindOperIngressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..1048575)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MPLS label used by the far-end device to send packets to this
device in this service via this SDP. This label is either
sdpBindAdminIngressLabel, if not null, or the one obtained via the
SDP's signaling protocol."
DEFVAL { 0 }
::= { sdpBindEntry 5 }
sdpBindOperEgressLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..1048575)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MPLS label used by this device to send packets to the far-end
device in this service via this SDP. This label is either
sdpBindAdminEgressLabel, if not null, or the one obtained via the
SDP's signaling protocol."
DEFVAL { 0 }
::= { sdpBindEntry 6 }
sdpBindAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The desired state of this Service-SDP binding."
DEFVAL { up }
::= { sdpBindEntry 7 }
sdpBindOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
noEgressLabel (2),
noIngressLabel (3),
noLabels (4),
down (5),
svcMtuMismatch (6),
sdpPathMtuTooSmall (7),
sdpNotReady (8),
sdpDown (9),
sapDown (10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindOperStatus indicates the operating status of
this Service-SDP binding.
'up' The Service-SDP binding is operational.
'noEgressLabel' The ingress label is available but the
egress one is missing.
'noIngressLabel' The egress label is available but the
ingress one is not.
'noLabels' Both the ingress and the egress labels
are missing.
'down' The binding is administratively down.
'svcMtuMismatch' Both labels are available, but a service
MTU mismatch was detected between the local
and the far-end devices.
'sdpPathMtuTooSmall' The operating path MTU of the corresponding
SDP minus the size of the SDP Bind control
word (if applicable) is smaller than the
service MTU.
'sdpNotReady' The SDP's signaling session is down.
'sdpDown' The SDP is not operationally up.
'sapDown' The SAP associated with the service is down."
::= { sdpBindEntry 8 }
sdpBindLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the most recent
management-initiated change to this Service-SDP binding."
::= { sdpBindEntry 9 }
sdpBindType OBJECT-TYPE
SYNTAX INTEGER {
spoke (1),
mesh (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether this Service SDP
binding is a spoke or a mesh. The value of this
object must be specified when the row is created
and cannot be changed while the row status is
'active'."
DEFVAL { mesh }
::= { sdpBindEntry 10 }
sdpBindIngressMacFilterId OBJECT-TYPE
SYNTAX TConfigOrVsdFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row index in the tMacFilterTable corresponding to this ingress
filter, or zero if no filter is specified."
DEFVAL { 0 }
::= { sdpBindEntry 11 }
sdpBindIngressIpFilterId OBJECT-TYPE
SYNTAX TConfigOrVsdFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row index in the tIPFilterTable corresponding to this ingress
filter, or zero if no filter is specified."
DEFVAL { 0 }
::= { sdpBindEntry 12 }
sdpBindEgressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row index in the tMacFilterTable corresponding to this egress
filter, or zero if no filter is specified."
DEFVAL { 0 }
::= { sdpBindEntry 13 }
sdpBindEgressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row index in the tIPFilterTable corresponding to this egress
filter, or zero if no filter is specified."
DEFVAL { 0 }
::= { sdpBindEntry 14 }
sdpBindVpnId OBJECT-TYPE
SYNTAX VpnId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VPN ID of the associated service."
::= { sdpBindEntry 15 }
sdpBindCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Customer ID of the associated service."
::= { sdpBindEntry 16 }
sdpBindVcType OBJECT-TYPE
SYNTAX SdpBindVcType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindVcType is an enumerated integer that specifies the
type of virtual circuit (VC) associated with the SDP binding.
The value 'vpls' is no longer supported."
::= { sdpBindEntry 17 }
sdpBindVlanVcTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
""
DEFVAL { '0fff'H }
::= { sdpBindEntry 18 }
sdpBindSplitHorizonGrp OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value of the object sdpBindSplitHorizonGrp specifies the name of
the split-horizon group where the spoke SDP Bind belongs to. This
object can be set only at the time the row is created and is mutually
exclusive with sdpBindMulticastSource. Per default a spoke SDP Bind
does not belong to any split-horizon group. The name specified must
correspond to an existing split-horizon group in the TLS service where
this spoke SDP Bind is defined."
DEFVAL { "" }
::= { sdpBindEntry 19 }
sdpBindOperFlags OBJECT-TYPE
SYNTAX BITS {
sdpBindAdminDown (0),
svcAdminDown (1),
stitchingSvcTxDown (2),
sdpOperDown (3),
sdpPathMtuTooSmall (4),
noIngressVcLabel (5),
noEgressVcLabel (6),
svcMtuMismatch (7),
vcTypeMismatch (8),
relearnLimitExceeded (9),
iesIfAdminDown (10),
releasedIngressVcLabel (11),
labelsExhausted (12),
svcParamMismatch (13),
insufficientBandwidth (14),
pwPeerFaultStatusBits (15),
meshSdpDown (16),
notManagedByMcRing (17),
outOfResource (18),
mhStandby (19),
oamDownMepFault (20),
oamUpMepFault (21),
standbySigSlaveTxDown (22),
operGrpDown (23),
withdrawnIngressVcLabel (24),
vplsPmsiDown (25),
recProtSrcMac (26),
peerFaultStatusTxDown (27),
evpnRouteConflict (28),
adminLocked (29),
evpnP2mpConflict (30),
labelStackLimitExceeded (31),
vccvBfdDown (32),
stitchingSvcPwFault (33)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates all the conditions that affect the operating
status of this SDP Bind.
The bit values are as follows:
sdpBindAdminDown (0) - SDP Bind is admin down.
svcAdminDown (1) - Service is admin down.
stitchingSvcTxDown (2) - PW-PORT FPE stitching svc
transmit is down.
sdpOperDown (3) - SDP is oper down.
sdpPathMtuTooSmall (4) - SDP's path MTU minus SDP Bind control
word size is less than Service MTU.
noIngressVcLabel (5) - No ingress VC label.
noEgressVcLabel (6) - No egress VC label.
svcMtuMismatch (7) - Service MTU mismatch with the
remote PE.
vcTypeMismatch (8) - VC type mismatch with the remote PE.
relearnLimitExceeded (9) - MAC relearn limit was exceeded
(TLS only).
iesIfAdminDown (10) - IP interface is admin down
(IES and VPRN only).
releasedIngressVcLabel (11) - Peer released our ingress VC label.
labelsExhausted (12) - Label Manager has ran out of labels.
svcParamMismatch (13) - Service-specific parameter mismatch.
insufficientBandwidth (14) - Insufficient bandwidth to allocate
to SDP binding.
pwPeerFaultStatusBits (15) - Received PW fault status bits from
peer.
meshSdpDown (16) - Mesh SDP Down.
notManagedByMcRing (17) - Not managed by mc-ring.
outOfResource (18) - Such as memory.
mhStandby (19) - Standby due to BGP.
multi-home protocol.
oamDownMepFault (20) - ETH-CFM down MEP fault detected.
oamUpMepFault (21) - ETH-CFM up MEP fault detected.
standbySigSlaveTxDown (22) - Transmit is down for
standby-sig-spoke.
operGrpDown (23) - Operational group is down.
withdrawnIngressVcLabel(24) - Withdrawn due to incompatibility.
vplsPmsiDown (25) - provider-tunnel down.
recProtSrcMac (26) - Received a packet with a
protected source MAC.
peerFaultStatusTxDown (27) - Transmit is down because
block-on-peer-fault is
enabled and received PW
faults status from peer.
evpnRouteConflict (28) - EVPN has route to.
adminLocked (29) - SDP Bind is admin-locked.
evpnP2mpConfict (30) - Conflict with evpn p2mp.
labelStackLimitExceeded(31) - label stack overhead exceeding the
egress IOM limitation.
vccvBfdDown(32) - vccv-bfd down
stitchingSvcPwFault(33) - stitching-svc-pw-fault"
::= { sdpBindEntry 20 }
sdpBindLastStatusChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindLastStatusChange indicates the value of
sysUpTime at the time of the most recent operating status change to
this SDP Bind."
::= { sdpBindEntry 21 }
sdpBindIesIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this SDP Bind is defined on an IES service and the value of
sdpBindType is 'spoke', this object specifies the index of the
associated IES interface. The value of this object can be set only
when the row is created and cannot be changed while the row status is
'active'. This object is otherwise not significant and should have the
value zero."
::= { sdpBindEntry 22 }
sdpBindMacPinning OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindMacPinning specifies whether or not MAC
address pinning is active on this SDP bind (mesh or spoke). Setting
the value to enable disables relearning of MAC addresses on other SAPs
or SDPs within the same VPLS; the MAC address will hence remain
attached to the SDP Bind for the duration of its age-timer. This
object has effect only for MAC addresses learned via the normal MAC
learning process, and not for entries learned via DHCP. The value will
be set by default to disabled. However for a spoke SDP that belongs to
a residential SHG, the value is set to enabled by the system, and
cannot be altered by the operator. This object applies to spoke-SDP
associated with the service with svcType set to 'tls'."
::= { sdpBindEntry 23 }
sdpBindIngressIpv6FilterId OBJECT-TYPE
SYNTAX TConfigOrVsdFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindIngressIpv6FilterId specifies the row
index in the tIPv6FilterTable corresponding to this ingress ipv6
filter, or zero if no ipv6 filter is specified."
DEFVAL { 0 }
::= { sdpBindEntry 24 }
sdpBindEgressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindEgressIpv6FilterId specifies the row
index in the tIPv6FilterTable corresponding to this egress ipv6
filter, or zero if no ipv6 filter is specified."
DEFVAL { 0 }
::= { sdpBindEntry 25 }
sdpBindCollectAcctStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindCollectAcctStats specifies whether the
agent collects accounting statistics for this SDP bind. When the value
is 'true' the agent collects accounting statistics on this SDP bind."
DEFVAL { false }
::= { sdpBindEntry 26 }
sdpBindAccountingPolicyId OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindAccountingPolicyId specifies the policy to use to
collect accounting statistics on this SDP bind. The value zero
indicates that the agent should use the default accounting policy, if
one exists."
DEFVAL { 0 }
::= { sdpBindEntry 27 }
sdpBindPwPeerStatusBits OBJECT-TYPE
SYNTAX BITS {
pwNotForwarding (0),
lacIngressFault (1),
lacEgresssFault (2),
psnIngressFault (3),
psnEgressFault (4),
pwFwdingStandby (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"sdpBindPwPeerStatusBits indicates the bits set by the LDP
peer when there is a fault on its side of the pseudowire.
LAC failures occur on the SAP that has been configured on
the PIPE service, PSN bits are set by SDP-binding failures
on the PIPE service. The pwNotForwarding bit is set when
none of the above failures apply, such as an MTU mismatch
failure. This value is only applicable if the peer is
using the pseudowire status signalling method to indicate
faults."
::= { sdpBindEntry 28 }
sdpBindPeerVccvCvBits OBJECT-TYPE
SYNTAX BITS {
icmpPing (0),
lspPing (1),
bfdFaultDetection (2),
bfdFaultDetectionAndSignalling (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"sdpBindPeerVccvCvBits indicates the CV type bits set by the
LDP peer if it supports VCCV (Virtual Circuit Connection
Verification) on a pseudowire. If the peer does not send
VCCV information, or does not support it, the bits will
be set to 0."
::= { sdpBindEntry 29 }
sdpBindPeerVccvCcBits OBJECT-TYPE
SYNTAX BITS {
pwe3ControlWord (0),
mplsRouterAlertLabel (1),
mplsPwDemultiplexorLabel (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"sdpBindPeerVccvCcBits indicates the CC type bits set by the
LDP peer if it supports VCCV (Virtual Circuit Connection
Verification) on a pseudowire. If the peer does not send
VCCV information, or does not support it, the bits will
all be 0."
::= { sdpBindEntry 30 }
sdpBindControlWordBit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"sdpBindControlWordBit specifies whether the use of the 'ControlWord'
is preferred or not. The value of sdpBindControlWordBit is exchanged
with LDP peer during pseudowire negotiation time. The default value is
determined by sdpBindVcType. sdpBindVcType of atmSdu and frDlci must
have default value of 'true'. Other values of sdpBindVcType must have
default value of 'false'."
::= { sdpBindEntry 31 }
sdpBindOperControlWord OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"sdpBindOperControlWord indicates whether the 'ControlWord'
is used or not. The value of sdpBindOperControlWord is
negotiated with the LDP peer. When both the local and the
peer prefer the use of the 'ControlWord', sdpBindOperControlWord
has the value of 'true'."
::= { sdpBindEntry 32 }
sdpBindEndPoint OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"sdpBindEndPoint specifies the service endpoint to which this SDP bind
is attached. The svcId of the SDP bind MUST match the svcId of the
service endpoint."
DEFVAL { "" }
::= { sdpBindEntry 33 }
sdpBindEndPointPrecedence OBJECT-TYPE
SYNTAX Unsigned32 (0..4)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"sdpBindEndPointPrecedence specifies the precedence of this SDP bind
when there are multiple SDP binds attached to one service endpoint.
The value 0 can only be assigned to one SDP bind, making it the
primary SDP bind. When an SDP bind goes down, the next highest
precedence SDP bind begins forwarding traffic."
DEFVAL { 4 }
::= { sdpBindEntry 34 }
sdpBindIsICB OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"sdpBindIsICB specifies whether this sdpBind is an inter-chassis backup
SDP bind."
DEFVAL { false }
::= { sdpBindEntry 35 }
sdpBindPwFaultInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindPwFaultInetAddressType indicates the
address type of sdpBindPwFaultInetAddress."
::= { sdpBindEntry 36 }
sdpBindPwFaultInetAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindPwFaultInetAddress indicates the IP
address that was included in the pseudowire status
message sent by the LDP peer. This value is only
applicable if the peer is using the pseudowire status
signalling method to indicate faults."
::= { sdpBindEntry 37 }
sdpBindClassFwdingOperState OBJECT-TYPE
SYNTAX TmnxOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindClassFwdingOperState indicates the operational
state of forwarding class based forwarding on this sdpBind.
When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to
'false', the value of sdpBindClassFwdingOperState is 'outOfService'.
When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to
'true' and the svcType of the service this sdpBind is defined on is
'tls', 'vprn', or 'ies', the value of sdpBindClassFwdingOperState is
'inService'. If the service has svcVcSwitching set to 'true', the
value of sdpBindClassFwdingOperState is 'inService'
When the SDP this sdpBind is bound to has sdpClassFwdingEnabled set to
'true' and the svcType of the service this sdpBind is defined on is
'epipe', 'apipe', 'fpipe', or 'ipipe' with no SAP defined on the
service, the value of sdpBindClassFwdingOperState is 'unknown'. If the
service has a SAP with a NULL sapIngressSharedQueuePolicy, the value
of sdpBindClassFwdingOperState is 'outOfService'. If the service has a
SAP with a non-NULL sapIngressSharedQueuePolicy, the value of
sdpBindClassFwdingOperState is 'inService'."
::= { sdpBindEntry 38 }
sdpBindForceVlanVcForwarding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindForceVlanVcForwarding specifies whether or not
vc-vlan-type forwarding is forced in the datapath for the sdp which
have sdpBindVcType set to 'ether'. When set to 'true'
vc-vlan-type forwarding is forced.
An 'inconsistentValue' error is returned when an attempt is made to
set the value of sdpBindForceVlanVcForwarding to 'true' and
sdpBindVcType is not set to 'ether'."
DEFVAL { false }
::= { sdpBindEntry 39 }
sdpBindAdminBandwidth OBJECT-TYPE
SYNTAX SdpBindBandwidth
UNITS "kilobps"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindAdminBandwidth specifies the bandwidth
that needs to be reserved for this SDP binding in kilobits per second.
The SdpBindBandwidth object only applies to the SDP bindings under the
epipe(1), apipe(7), fpipe(8), ipipe(9) and cpipe(10) services."
DEFVAL { 0 }
::= { sdpBindEntry 40 }
sdpBindOperBandwidth OBJECT-TYPE
SYNTAX SdpBindBandwidth
UNITS "kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindOperBandwidth indicates the bandwidth
that has been reserved for this SDP binding in kilobits per second.
The value 0 indicates that SDP doesn't have bandwidth to satisfy the
bandwidth requirement of this SDP binding. The sdpBindOperBandwidth
object only applies to the SDP bindings under the epipe(1), apipe(7),
fpipe(8), ipipe(9) and cpipe(10) services."
::= { sdpBindEntry 41 }
sdpBindCreationOrigin OBJECT-TYPE
SYNTAX TmnxCreateOrigin
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindCreationOrigin indicates the protocol or mechanism
which created this SDP binding."
::= { sdpBindEntry 42 }
sdpBindDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindDescription specifies a user-provided description
for the SDP Bind."
DEFVAL { "" }
::= { sdpBindEntry 43 }
sdpBindSiteName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindSiteName indicates the site-name associated with
this SDP Bind."
::= { sdpBindEntry 44 }
sdpBindHashLabel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindHashLabel specifies whether the use of hash label
is enabled or not on this SDP Bind."
DEFVAL { false }
::= { sdpBindEntry 45 }
sdpBindIsaAaApplicationProfile OBJECT-TYPE
SYNTAX ServObjName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindIsaAaApplicationProfile specifies the ISA-AA
application profile for this sdp. The specified application profile
needs to exist in the TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable."
DEFVAL { "" }
::= { sdpBindEntry 46 }
sdpBindStandbySigSlave OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindStandbySigSlave specifies whether transmission of
the spoke will be blocked when the spoke receives standby status
notification from its peer."
DEFVAL { false }
::= { sdpBindEntry 47 }
sdpBindHashLabelSignalCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindHashLabelSignalCapability specifies whether to
signal the hash label capability to the remote PE.
The default value is 'false' and cannot be changed unless
sdpBindHashLabel is set to 'true'."
DEFVAL { false }
::= { sdpBindEntry 48 }
sdpBindIngressFlowspec OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of sdpBindIngressFlowspec specifies whether ingress IPv4
Flowspec is enabled for this sdp."
DEFVAL { false }
::= { sdpBindEntry 49 }
sdpBindCpmProtPolicyId OBJECT-TYPE
SYNTAX TCpmProtPolicyID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindCpmProtPolicyId specifies the CPM protection
policy for this SDP binding.
Zero specifies that no CPM protection policy is associated with this
SDP binding. A non-zero value must be the index of an active
tmnxCpmProtPolTable row.
If the SDP binding can support Eth-CFM MEPs or MIPs, the default CPM
protection policy is 255 (which is the default CPU protection policy
for a network interface). Zero is not supported in this case.
If the SDP binding cannot support Eth-CFM MEPs or MIPs, the default CPM
protection policy is zero. Changing the CPM protection policy value
is not supported in this case."
DEFVAL { 255 }
::= { sdpBindEntry 50 }
sdpBindCpmProtMonitorMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindCpmProtMonitorMac specifies whether the
tmnxCpmProtPolPerSrcRateLimit of the CPM protection policy (as
specified by sdpBindCpmProtPolicyId) must be applied.
If the value of sdpBindCpmProtMonitorMac is 'true', the per-source
rate limit must be applied.
If the value of sdpBindCpmProtPolicyId is zero, the value of
sdpBindCpmProtMonitorMac is irrelevant and will be ignored.
At most one of sdpBindCpmProtMonitorMac and the
sdpBindCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)' can be
enabled for this SDP binding."
DEFVAL { false }
::= { sdpBindEntry 51 }
sdpBindCpmProtEthCfmMonitorFlags OBJECT-TYPE
SYNTAX BITS {
ethCfmMonitor (0),
ethCfmMonitorAggregate (1),
ethCfmMonitorCommittedAccessRate (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindCpmProtEthCfmMonitorFlags specifies whether or not
to apply rate limiting (using the tmnxCpmProtEthCfmPolTable
configuration) to Ethernet Connectivity Fault Management (Eth-CFM)
packets served by the SDP binding. Two associated options are also
specified.
Five combinations of flag values are supported, as shown in the
following table.
Flag Value (0=Disabled, 1=Enabled)
------------------------------------- -----------------------------
'ethCfmMonitor(0)' 0 0 0 0 1 1 1 1
'ethCfmMonitorAggregate(1)' 0 0 1 1 0 0 1 1
'ethCfmMonitorCommittedAccessRate(2)' 0 1 0 1 0 1 0 1
------------------------------------- -----------------------------
Supported Combination? Y N N N Y Y Y Y
If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled
on this SDP binding.
If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on
this SDP binding. Excess packets are discarded. The configured
information used to perform the Eth-CFM rate limiting (e.g. the rate
limit(s)) resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by
the SDP binding's sdpBindCpmProtPolicyId.
At most one of the following options can be enabled on this SAP:
1. sdpBindCpmProtMonitorMac,
2. The sdpBindCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)',
3. sdpBindCpmProtMonitorIP.
The flags 'ethCfmMonitorAggregate(1)' and
'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM
rate limiting. Therefore, they are only significant if Eth-CFM rate
limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled). The
remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled.
If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM
packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer
(i.e. on a source MAC address basis). For example, if the SDP
binding's rate limit for all Eth-CFM packets is 100 packets/sec, and
two peers are served by the SDP binding, then 100 Eth-CFM packets/sec
from each peer is within the limit.
If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM
packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the
aggregated traffic flow. For example, if the SDP binding's rate limit
for all Eth-CFM packets is 100 packets/sec, and two peers are served by
this SDP binding, then the combined rate of the two peers cannot exceed
100 packets/sec.
'ethCfmMonitorCommittedAccessRate(2)' controls the interaction
between two features: Eth-CFM rate limiting, and overall rate limiting
(as configured using tmnxCpmProtPolOverallRateLimit).
If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM
packet is subjected to two rate limits, in the following order.
a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as
described above. If the packet exceeds the limit, it is discarded.
Otherwise...
b) The SDP binding's tmnxCpmProtPolOverallRateLimit (which is applied
to Eth-CFM packets, and the other rate limited packet types) is
applied.
If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet
is subjected to one rate limit: the applicable
tmnxCpmProtEthCfmPolRateLimit, as described above. Eth-CFM packets
are neither counted nor discarded when performing the
tmnxCpmProtPolOverallRateLimit rate limiting."
DEFVAL { {} }
::= { sdpBindEntry 52 }
sdpBindTransitIpPolicyId OBJECT-TYPE
SYNTAX TmnxBsxTransitIpPolicyIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindTransitIpPolicyId specifies the transit IP policy
to be associated with this SDP binding. The value must either be '0'
indicating an invalid transit IP policy or the specified transit IP
policy needs to exist in the
TIMETRA-BSX-NG-MIB::tmnxBsxTransitIpPolicyTable.
At most one of sdpBindTransitIpPolicyId and
sdpBindTransitPrefixPolicyId can be non-zero."
DEFVAL { 0 }
::= { sdpBindEntry 53 }
sdpBindPwStatusSignaling OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindPwStatusSignaling specified whether this SDP
binding supports pseudowire status signaling.
Default value depends on the type of service:
- For VPLS services it is 'true' and configurable.
- For EPIPE services it is 'true' and configurable.
- For all other VLL services it is 'true' but not configurable.
- For Mirror services it is 'true' but not configurable.
- For IES/VPRN services it is 'true' but not configurable.
- For all other services it is 'false' and not configurable.
An 'inconsistentValue' error is returned when an attempt is made to
change this value for a SDP binding that is not configurable."
::= { sdpBindEntry 54 }
sdpBindOperGrp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the sdpBindOperGrp specifies the Operational-Group
identifier associated with this SDP Bind.
An 'inconsistentValue' error is returned when both sdpBindOperGrp and
sdpBindMonitorOperGrp are set together and at least one of them to a
non-default value."
DEFVAL { "" }
::= { sdpBindEntry 55 }
sdpBindMonitorOperGrp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the sdpBindMonitorOperGrp specifies the Operational-Group
identifier which will affect the state of this SDP Bind.
An 'inconsistentValue' error is returned when both sdpBindOperGrp and
sdpBindMonitorOperGrp are set together and at least one of them to a
non-default value."
DEFVAL { "" }
::= { sdpBindEntry 56 }
sdpBindOperHashLabel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindOperHashLabel indicates the negotiated value of
hash label that is used on this SDP binding.
If the value of sdpBindHashLabel is set to 'true' but the value of
sdpBindHashLabelSignalCapability is set to 'false' then
sdpBindOperHashLabel will be 'true'.
If the value of sdpBindHashLabelSignalCapability set to 'true' then
the value of sdpBindOperHashLabel is 'true' if peer capability is
'true' and the 7xxx SR router hardware supports this capability.
If the service has svcVcSwitching set to 'true', the value of
sdpBindOperHashLabel will be 'true' if peer capability is 'true' and
the 7xxx SR router hardware supports this capability."
::= { sdpBindEntry 57 }
sdpBindTransitPrefixPolicyId OBJECT-TYPE
SYNTAX TmnxBsxTransPrefPolicyIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindTransitPrefixPolicyId specifies the transit prefix
policy to be associated with this SDP binding. The value must either
be '0' indicating an invalid transit prefix policy or the specified
transit prefix policy needs to exist in the
TIMETRA-BSX-NG-MIB::tmnxBsxTransPrefPolicyTable.
At most one of sdpBindTransitIpPolicyId and
sdpBindTransitPrefixPolicyId can be non-zero."
DEFVAL { 0 }
::= { sdpBindEntry 58 }
sdpBindAarpId OBJECT-TYPE
SYNTAX TmnxBsxAarpIdOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindAarpId specifies the AA Redundancy Protocol (AARP)
instance associated with this SDP binding. If set to 0, no AARP
instance is associated with this SDP binding."
DEFVAL { 0 }
::= { sdpBindEntry 59 }
sdpBindIngressQoSNetworkPlcyId OBJECT-TYPE
SYNTAX TSdpIngressPolicyID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the sdpBindIngressQoSNetworkPlcyId specifies the ingress
QoS network policy applied to this SDP binding."
DEFVAL { 0 }
::= { sdpBindEntry 60 }
sdpBindEgressQoSNetworkPlcyId OBJECT-TYPE
SYNTAX TSdpEgressPolicyID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the sdpBindEgressQoSNetworkPlcyId specifies the egress
QoS network policy applied to this SDP binding."
DEFVAL { 0 }
::= { sdpBindEntry 61 }
sdpBindIngressQoSFpRedirectQGrp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindIngressQoSFpRedirectQGrp specifies the
forwarding-plane queue group Policy for this SDP binding.
This object must be set along with sdpBindIngressQoSNetworkPlcyId
object."
DEFVAL { "" }
::= { sdpBindEntry 62 }
sdpBindEgressQoSPortRedirectQGrp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindEgressQoSPortRedirectQGrp specifies the
forwarding-plane queue group Policy for this SDP binding.
This object must be set along with sdpBindEgressQoSNetworkPlcyId
object."
DEFVAL { "" }
::= { sdpBindEntry 63 }
sdpBindIngressQoSInstanceId OBJECT-TYPE
SYNTAX TQosQGrpInstanceIDorZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindIngressQoSInstanceId specifies the instance of the
forwarding-plane ingress Queue Group for this SDP binding."
DEFVAL { 0 }
::= { sdpBindEntry 64 }
sdpBindEgressQoSInstanceId OBJECT-TYPE
SYNTAX TQosQGrpInstanceIDorZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindEgressQoSInstanceId specifies the instance of the
forwarding-plane egress Queue Group for this SDP binding."
DEFVAL { 0 }
::= { sdpBindEntry 65 }
sdpBindAarpServRefType OBJECT-TYPE
SYNTAX TmnxBsxAarpServiceRefType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindAarpServRefType specifies the role of the Spoke
SDP referenced by the Redundancy Protocol (AARP) instance identified
by sdpBindAarpId. If sdpBindAarpId is the invalid AARP instance '0',
then the service reference type is 'none(0)'."
DEFVAL { none }
::= { sdpBindEntry 66 }
sdpBindPwLocalStatusBits OBJECT-TYPE
SYNTAX BITS {
pwNotForwarding (0),
lacIngressFault (1),
lacEgresssFault (2),
psnIngressFault (3),
psnEgressFault (4),
pwFwdingStandby (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"sdpBindPwLocalStatusBits indicates the bits set locally
when there is a fault.
LAC failures occur on the SAP that has been configured on
the PIPE service, PSN bits are set by SDP-binding failures
on the PIPE service. The pwNotForwarding bit is set when
none of the above failures apply, such as an MTU mismatch
failure. This value is sent to the peer via pseudowire
status signalling method to indicate faults only if
sdpBindPwStatusSignaling is set to true."
::= { sdpBindEntry 67 }
sdpBindBlockOnPeerFault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The sdpBindBlockOnPeerFault specifies whether to block the user
traffic on this SDP bind when peer pw status has fault bits set."
DEFVAL { false }
::= { sdpBindEntry 68 }
sdpBindIngressIPv6Flowspec OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of sdpBindIngressIPv6Flowspec specifies whether ingress IPv6
Flowspec is enabled for this sdp."
DEFVAL { false }
::= { sdpBindEntry 69 }
sdpBindMirrorRemoteSource OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindMirrorRemoteSource specifies whether this SDP bind
is part of remote source of the mirror service."
DEFVAL { false }
::= { sdpBindEntry 70 }
sdpBindEtreeRootLeafTag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindEtreeRootLeafTag specifies whether or not this SDP
binding is etree tagging in this service.
An 'inconsistentValue' error is returned if the value of this object
is set to 'true' when TIMETRA-SERV-MIB::svcType for the service is not
set to 'tls'.
An 'inconsistentValue' error is returned if the value of this object
is set to 'true' when TIMETRA-SERV-MIB::svcTlsModeEtree for the
service is set to 'false'.
An 'inconsistentValue' error is returned if sdpBindEtreeRootLeafTag is
set to a non-default value and sdpBindEtreeLeafAc is also set to a
non-default value for the same SDP instance.
The value of this object can be set only during the creation of the
SDP instance. An 'inconsistentValue' error is returned if
sdpBindEtreeRootLeafTag is Set to a different value after the SDP
instance has been created."
DEFVAL { false }
::= { sdpBindEntry 72 }
sdpBindCpmProtMonitorIP OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindCpmProtMonitorIP specifies whether or not to apply
the tmnxCpmProtPolPerSrcRateLimit of this SDP binding's CPM Protection
policy to IPv4 DHCP packets served by the SDP binding, on a per source
IP address basis.
For example, suppose sdpBindCpmProtMonitorIP is 'true', and this SDP
binding's sdpBindCpmProtPolicyId points to a policy table row with
tmnxCpmProtPolPerSrcRateLimit set to 100 packets/second. Suppose two
source IP addresses (e.g. 138.120.141.173 and 138.120.141.174) each
send 150 DHCP packets/second to this SAP. Approx. 50 DHCP
packets/second from each source will be discarded.
If the value of sdpBindCpmProtPolicyId is equal to zero, the value of
sdpBindCpmProtMonitorIP is irrelevant and will be ignored.
At most one of the following options can be enabled on this SDP
binding:
1. sdpBindCpmProtMonitorMac,
2. The sdpBindCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)',
3. sdpBindCpmProtMonitorIP."
DEFVAL { false }
::= { sdpBindEntry 73 }
sdpBindUseSdpBMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindUseSdpBMac specifies whether this spoke-SDP is
expected to be part of a redundant pseudo-wire within a PBB epipe
service.
Setting the value of sdpBindUseSdpBMac to 'true (1)' will cause
traffic forwarded from this spoke-SDP into the B-VPLS domain to use a
virtual backbone MAC as its source MAC address when the value of both
sdpSourceBMacLSB and sdpControlPWVCId is set to non-default values."
DEFVAL { false }
::= { sdpBindEntry 74 }
sdpBindEtreeLeafAc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindEtreeLeafAc specifies whether or not this SDP
binding is an etree leaf access circuit of the service.
An 'inconsistentValue' error is returned if the value of this object
is set to 'true' when TIMETRA-SERV-MIB::svcType for the service is not
set to 'tls'.
An 'inconsistentValue' error is returned if the value of this object
is set to 'true' when TIMETRA-SERV-MIB::svcTlsModeEtree for the
service is set to 'false'.
An 'inconsistentValue' error is returned if sdpBindEtreeLeafAc is set
to a non-default value and sdpBindEtreeRootLeafTag is also set to a
non-default value for the same SDP instance.
The value of this object can be set only during the creation of the
SDP instance. An 'inconsistentValue' error is returned if
sdpBindEtreeLeafAc is Set to a different value after the SDP instance
has been created."
DEFVAL { false }
::= { sdpBindEntry 75 }
sdpBindBfdTemplateName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindBfdTemplateName specifies BFD template associated
with this SDP binding."
DEFVAL { ''H }
::= { sdpBindEntry 76 }
sdpBindBfdEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindBfdEnable specifies whether BFD is enabled on this
SDP binding."
DEFVAL { false }
::= { sdpBindEntry 77 }
sdpBindBfdEncap OBJECT-TYPE
SYNTAX TmnxBfdEncap
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindBfdEncap specifies the BFD encapsulation used on
this SDP binding."
DEFVAL { ipv4 }
::= { sdpBindEntry 78 }
sdpBindForceQinqVcForwarding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of sdpBindForceQinqVcForwarding specifies whether or not the
datapath should forcefully insert two VLAN tags when sdpBindVcType is
either set to 'ether' or 'vlan'.
An 'inconsistentValue' error is returned when an attempt is made to
set the value of sdpBindForceQinqVcForwarding to 'true' and
sdpBindVcType is not set to either 'ether' or 'vlan'."
DEFVAL { false }
::= { sdpBindEntry 79 }
sdpBindIngressVlanTranslation OBJECT-TYPE
SYNTAX INTEGER {
none (1),
vlanId (2),
copyOuter (3)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of sdpBindIngressVlanTranslation specifies the desired
Ingress Vlan Translation.
A value of 'vlanId' specifies that the value of
sdpBindIngressVlanTranslationId is to be used to overwrite the
preserved VLAN id in the packet.
A value of 'copyOuter' specifies that the outer VLAN id should be used
to overwrite the preserved VLAN id in the packet.
An 'inconsistentValue' error is returned when an attempt is made to
set the value of sdpBindIngressVlanTranslation to 'vlanId' and
sdpBindIngressVlanTranslationId is set to '-1'."
DEFVAL { none }
::= { sdpBindEntry 80 }
sdpBindIngressVlanTranslationId OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..4094)
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of sdpBindIngressVlanTranslationId specifies the VLAN id to
be used to overwrite the preserved VLAN id in the packet.
An 'inconsistentValue' error is returned when an attempt is made to
set the value of sdpBindIngressVlanTranslationId to other than '-1'
and sdpBindIngressVlanTranslation is not set to 'vlanId'."
DEFVAL { -1 }
::= { sdpBindEntry 81 }
sdpBindMinReqdSdpOperMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindMinReqdSdpOperMtu indicates the minimum required
SDP MTU size used with this SDP binding."
::= { sdpBindEntry 82 }
sdpBindForceQinqVcFwding OBJECT-TYPE
SYNTAX INTEGER {
none (0),
ctagctag (1),
stagctag (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindForceQinqVcFwding specifies whether or not the
datapath should forcefully insert two VLAN tags which are copied from
the qinq service-delimiting vlan values.
The sdpBindVcType should be either set to 'ether' or 'vlan'."
DEFVAL { none }
::= { sdpBindEntry 83 }
sdpBindMulticastSource OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindMulticastSource specifies whether or not the
multicast source is enabled on the SDP. This object can only be set at
the time the row is created and is mutually exclusive with
sdpBindSplitHorizonGrp."
DEFVAL { false }
::= { sdpBindEntry 84 }
sdpBindBaseStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindBaseStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains basic SDP Binding statistics."
::= { tmnxSdpObjs 5 }
sdpBindBaseStatsEntry OBJECT-TYPE
SYNTAX SdpBindBaseStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Basic statistics about a specific SDP Binding."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindBaseStatsTable 1 }
SdpBindBaseStatsEntry ::= SEQUENCE
{
sdpBindBaseStatsIngressForwardedPackets Counter64,
sdpBindBaseStatsIngressDroppedPackets Counter64,
sdpBindBaseStatsEgressForwardedPackets Counter64,
sdpBindBaseStatsEgressForwardedOctets Counter64,
sdpBindBaseStatsCustId TmnxCustId,
sdpBindBaseStatsIngFwdOctets Counter64,
sdpBindBaseStatsIngDropOctets Counter64
}
sdpBindBaseStatsIngressForwardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { sdpBindBaseStatsEntry 1 }
sdpBindBaseStatsIngressDroppedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { sdpBindBaseStatsEntry 2 }
sdpBindBaseStatsEgressForwardedPackets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { sdpBindBaseStatsEntry 3 }
sdpBindBaseStatsEgressForwardedOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { sdpBindBaseStatsEntry 4 }
sdpBindBaseStatsCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Customer ID of the associated service."
::= { sdpBindBaseStatsEntry 5 }
sdpBindBaseStatsIngFwdOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { sdpBindBaseStatsEntry 6 }
sdpBindBaseStatsIngDropOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
""
::= { sdpBindBaseStatsEntry 7 }
sdpBindTlsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains TLS spoke SDP Bind information."
::= { tmnxSdpObjs 6 }
sdpBindTlsEntry OBJECT-TYPE
SYNTAX SdpBindTlsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TLS specific information about an SDP Bind."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindTlsTable 1 }
SdpBindTlsEntry ::= SEQUENCE
{
sdpBindTlsStpAdminStatus TmnxEnabledDisabledAdminState,
sdpBindTlsStpPriority Integer32,
sdpBindTlsStpPortNum Integer32,
sdpBindTlsStpPathCost Integer32,
sdpBindTlsStpRapidStart TmnxEnabledDisabled,
sdpBindTlsStpBpduEncap INTEGER,
sdpBindTlsStpPortState TStpPortState,
sdpBindTlsStpDesignatedBridge BridgeId,
sdpBindTlsStpDesignatedPort Integer32,
sdpBindTlsStpForwardTransitions Gauge32,
sdpBindTlsStpInConfigBpdus Gauge32,
sdpBindTlsStpInTcnBpdus Gauge32,
sdpBindTlsStpInBadBpdus Gauge32,
sdpBindTlsStpOutConfigBpdus Gauge32,
sdpBindTlsStpOutTcnBpdus Gauge32,
sdpBindTlsStpOperBpduEncap INTEGER,
sdpBindTlsStpVpnId VpnId,
sdpBindTlsStpCustId TmnxCustId,
sdpBindTlsMacAddressLimit Integer32,
sdpBindTlsNumMacAddresses Integer32,
sdpBindTlsNumStaticMacAddresses Integer32,
sdpBindTlsMacLearning TmnxEnabledDisabled,
sdpBindTlsMacAgeing TmnxEnabledDisabled,
sdpBindTlsStpOperEdge TruthValue,
sdpBindTlsStpAdminPointToPoint INTEGER,
sdpBindTlsStpPortRole StpPortRole,
sdpBindTlsStpAutoEdge TmnxEnabledDisabled,
sdpBindTlsStpOperProtocol StpProtocol,
sdpBindTlsStpInRstBpdus Gauge32,
sdpBindTlsStpOutRstBpdus Gauge32,
sdpBindTlsLimitMacMove TlsLimitMacMove,
sdpBindTlsDiscardUnknownSource TmnxEnabledDisabled,
sdpBindTlsMvplsPruneState MvplsPruneState,
sdpBindTlsMvplsMgmtService TmnxServId,
sdpBindTlsMvplsMgmtSdpBndId SdpBindId,
sdpBindTlsStpException StpExceptionCondition,
sdpBindTlsL2ptTermination TmnxEnabledDisabled,
sdpBindTlsBpduTranslation TlsBpduTranslation,
sdpBindTlsStpRootGuard TruthValue,
sdpBindTlsStpInMstBpdus Gauge32,
sdpBindTlsStpOutMstBpdus Gauge32,
sdpBindTlsStpRxdDesigBridge BridgeId,
sdpBindTlsMacMoveNextUpTime Unsigned32,
sdpBindTlsMacMoveRateExcdLeft Unsigned32,
sdpBindTlsLimitMacMoveLevel TlsLimitMacMoveLevel,
sdpBindTlsBpduTransOper INTEGER,
sdpBindTlsL2ptProtocols L2ptProtocols,
sdpBindTlsIgnoreStandbySig TruthValue,
sdpBindTlsBlockOnMeshFail TruthValue,
sdpBindTlsInTcBitBpdus Counter32,
sdpBindTlsOutTcBitBpdus Counter32,
sdpBindTlsRestProtSrcMac TruthValue,
sdpBindTlsRestProtSrcMacAction INTEGER,
sdpBindTlsAutoLearnMacProtect TruthValue,
sdpBindDisableSendBvplsEvpnFlush TruthValue,
sdpBindTlsRestProtSrcMacOper TruthValue,
sdpBindTlsRestProtSrcMacOperAct INTEGER,
sdpBindTlsAutoLrnMacPrtExcList TNamedItemOrEmpty,
sdpBindTlsLastMgmtChange TimeStamp
}
sdpBindTlsStpAdminStatus OBJECT-TYPE
SYNTAX TmnxEnabledDisabledAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpAdminStatus specifies whether
this SDP Bind participates in the TLS's Spanning Tree Protocol."
DEFVAL { enabled }
::= { sdpBindTlsEntry 1 }
sdpBindTlsStpPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpPriority specifies the value of
the port priority field which is contained in the most significant 4
bits of the 16-bit Port ID associated with this SDP Bind. As only the
most significant 4 bits of the value are used, the actual value of
this object is limited to multiples of 16: e.g. the agent rounds down
the value to one of: 0, 16, 32, .. , 224, 240."
DEFVAL { 128 }
::= { sdpBindTlsEntry 2 }
sdpBindTlsStpPortNum OBJECT-TYPE
SYNTAX Integer32 (0..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpPortNum specifies the value of
the port number field which is contained in the least significant 12
bits of the 16-bit Port ID associated with this SDP Bind. Values in
the range 2048..4094 are automatically assigned by the agent when the
SDP Bind is created or when the value of this object is set to zero
via management. Values in the range 1..2047 can be set via management,
to allow this object to have a deterministic value across system
reboots."
::= { sdpBindTlsEntry 3 }
sdpBindTlsStpPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpPathCost specifies the
contribution of this port to the path cost of paths towards the
spanning tree root which include this port."
DEFVAL { 10 }
::= { sdpBindTlsEntry 4 }
sdpBindTlsStpRapidStart OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpRapidStart specifies whether
Rapid Start is enabled on this SDP Bind. When the value is 'enabled'
the Spanning Tree Protocol state transitions on this SDP Bind are
driven by the value of the 'HelloTime', instead of the value of
'ForwardDelay', thus allowing a faster transition into the forwarding
state."
DEFVAL { disabled }
::= { sdpBindTlsEntry 5 }
sdpBindTlsStpBpduEncap OBJECT-TYPE
SYNTAX INTEGER {
dynamic (1),
dot1d (2),
pvst (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpBpduEncap specifies the type of
encapsulation used on BPDUs sent out and received on this SDP Bind."
DEFVAL { dynamic }
::= { sdpBindTlsEntry 6 }
sdpBindTlsStpPortState OBJECT-TYPE
SYNTAX TStpPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpPortState indicates the port's
current state as defined by application of the Spanning Tree Protocol.
This state controls what action a port takes on reception of a frame.
If the bridge has detected a port that is malfunctioning it will place
that port into the 'broken' state. All possible states are: learning,
forwarding, broken, and discarding."
::= { sdpBindTlsEntry 7 }
sdpBindTlsStpDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpDesignatedBridge indicates the
Bridge Identifier of the bridge which this port considers to be the
Designated Bridge for this port's segment."
::= { sdpBindTlsEntry 8 }
sdpBindTlsStpDesignatedPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpDesignatedPort indicates the Port
Identifier of the port on the Designated Bridge for this port's
segment."
::= { sdpBindTlsEntry 9 }
sdpBindTlsStpForwardTransitions OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpForwardTransitions indicates the
number of times this port has transitioned from the Learning state to
the Forwarding state."
::= { sdpBindTlsEntry 10 }
sdpBindTlsStpInConfigBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpInConfigBpdus indicates the
number of Configuration BPDUs received on this SDP Bind."
::= { sdpBindTlsEntry 11 }
sdpBindTlsStpInTcnBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpInTcnBpdus indicates the number
of Topology Change Notification BPDUs received on this SDP Bind."
::= { sdpBindTlsEntry 12 }
sdpBindTlsStpInBadBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpInBadBpdus indicates the number
of bad BPDUs received on this SDP Bind."
::= { sdpBindTlsEntry 13 }
sdpBindTlsStpOutConfigBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpOutConfigBpdus indicates the
number of Configuration BPDUs sent out this SDP Bind."
::= { sdpBindTlsEntry 14 }
sdpBindTlsStpOutTcnBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpOutTcnBpdus indicates the number
of Topology Change Notification BPDUs sent out this SDP Bind."
::= { sdpBindTlsEntry 15 }
sdpBindTlsStpOperBpduEncap OBJECT-TYPE
SYNTAX INTEGER {
dot1d (2),
pvst (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpOperBpduEncap indicates the
operating encapsulation type used on BPDUs sent out and received on
this SDP Bind."
::= { sdpBindTlsEntry 16 }
sdpBindTlsStpVpnId OBJECT-TYPE
SYNTAX VpnId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpVpnId indicates the VPN ID of the
associated service."
::= { sdpBindTlsEntry 17 }
sdpBindTlsStpCustId OBJECT-TYPE
SYNTAX TmnxCustId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpCustId indicates the Customer ID
of the associated service."
::= { sdpBindTlsEntry 18 }
sdpBindTlsMacAddressLimit OBJECT-TYPE
SYNTAX Integer32 (0..511999)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsMacAddressLimit
specifies the maximum number of learned and static entries
allowed in the FDB for this SDP Bind. The value 0
means: no limit for this SDP Bind. The command is valid
only for spoke SDPs.
The maximum value of sdpBindTlsMacAddressLimit depends on the
platform/chassis mode."
DEFVAL { 0 }
::= { sdpBindTlsEntry 19 }
sdpBindTlsNumMacAddresses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsNumMacAddresses
indicates the number of MAC addresses currently present
in the FDB that belong to this SDP Bind (Both learned
and static MAC addresses are counted)."
::= { sdpBindTlsEntry 20 }
sdpBindTlsNumStaticMacAddresses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsNumStaticMacAddresses indicates the
number of static MAC addresses currently present in the FDB that
belong to this SDP Bind."
::= { sdpBindTlsEntry 21 }
sdpBindTlsMacLearning OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsMacLearning specifies whether the
MAC learning process is enabled for this SDP Bind. The value is
ignored if MAC learning is disabled on service level."
DEFVAL { enabled }
::= { sdpBindTlsEntry 22 }
sdpBindTlsMacAgeing OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsMacAgeing specifies
whether the MAC aging process is enabled for this
SDP Bind. the value is ignored if MAC aging is disabled
on service level."
DEFVAL { enabled }
::= { sdpBindTlsEntry 23 }
sdpBindTlsStpOperEdge OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpOperEdge indicates the
operational value of the Edge Port parameter. The object is
initialized to the value of sdpBindTlsStpRapidStart and is set FALSE
on reception of a BPDU."
REFERENCE
"IEEE 802.1t clause 14.8.2, 18.3.4"
::= { sdpBindTlsEntry 24 }
sdpBindTlsStpAdminPointToPoint OBJECT-TYPE
SYNTAX INTEGER {
forceTrue (0),
forceFalse (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpAdminPointToPoint specifies the
administrative point-to-point status of the LAN segment attached to
this sdp. A value of 'forceTrue' indicates that this port should
always be treated as if it is connected to a point-to-point link. A
value of 'forceFalse' indicates that this port should be treated as
having a shared media connection."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
DEFVAL { forceTrue }
::= { sdpBindTlsEntry 25 }
sdpBindTlsStpPortRole OBJECT-TYPE
SYNTAX StpPortRole
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpPortRole indicates the current
role of the sdp as defined by the Rapid Spanning Tree Protocol."
::= { sdpBindTlsEntry 26 }
sdpBindTlsStpAutoEdge OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpAutoEdge specifies whether this
SDP is enabled for auto-edge detection as defined by Rapid Spanning
Tree Protocol."
DEFVAL { enabled }
::= { sdpBindTlsEntry 27 }
sdpBindTlsStpOperProtocol OBJECT-TYPE
SYNTAX StpProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpOperProtocol indicates whether
stp, rstp or mstp is running on this spoke sdp. If the protocol is not
enabled on this spoke-sdp the value notApplicable is returned."
::= { sdpBindTlsEntry 28 }
sdpBindTlsStpInRstBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpInRstBpdus indicates the number
of Rapid Spanning Tree (Rst) BPDUs received on this SDP."
::= { sdpBindTlsEntry 29 }
sdpBindTlsStpOutRstBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpOutRstBpdus indicates the number
of Rapid Spanning Tree (Rstp) BPDUs sent out on this SDP."
::= { sdpBindTlsEntry 30 }
sdpBindTlsLimitMacMove OBJECT-TYPE
SYNTAX TlsLimitMacMove
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When sdpBindTlsLimitMacMove value is set to blockable
(1) the agent will monitor the MAC relearn rate on this
SDP Bind, and it will block it when the relearn rate
specified by svcTlsMacMoveMaxRate is exceeded. When the
value is 'nonBlockable' this SDP binding will not be
blocked, and another blockable SDP binding will be
blocked instead."
DEFVAL { blockable }
::= { sdpBindTlsEntry 31 }
sdpBindTlsDiscardUnknownSource OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"With the object sdpBindTlsMacAddressLimit a limit can
be configured for the max number of MAC addresses that
will be learned on this SDP Bind (only for spoke
SDPs). When this limit is reached, packets with
unknown source MAC address are forwarded by default.
By setting sdpBindTlsDiscardUnknownSource to enabled,
packets with unknown source MAC will be dropped in
stead."
DEFVAL { disabled }
::= { sdpBindTlsEntry 32 }
sdpBindTlsMvplsPruneState OBJECT-TYPE
SYNTAX MvplsPruneState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsMvplsPruneState indicates the mVPLS
prune state of the spoke SDP. The object will be set to notApplicable
if the spoke SDP is not managed by a mVPLS. If the SDP is managed the
state reflects whether or not it is pruned by the STP instance running
in the mVPLS instance."
::= { sdpBindTlsEntry 33 }
sdpBindTlsMvplsMgmtService OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsMvplsMgmtService indicates the
service Id of the service where the STP instance is running that is
managing this spoke SDP. This object is only valid if
sdpBindTlsMvplsPruneState is different from notApplicable."
::= { sdpBindTlsEntry 34 }
sdpBindTlsMvplsMgmtSdpBndId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsMvplsMgmtSdpBndId indicates the SDP
bind id in the mVPLS instance specified in sdpBindTlsMvplsMgmtService
that is controlling this SDP. This object is only valid if
sdpBindTlsMvplsPruneState is different from notApplicable."
::= { sdpBindTlsEntry 35 }
sdpBindTlsStpException OBJECT-TYPE
SYNTAX StpExceptionCondition
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpException indicates whether an
STP exception condition is present on this Spoke Sdp.
- none : no exception condition found.
- oneWayCommuniation : The neighbor RSTP peer on this link
is not able to detect our presence.
- downstreamLoopDetected :A loop is detected on this link."
::= { sdpBindTlsEntry 36 }
sdpBindTlsL2ptTermination OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsL2ptTermination specifies whether
received L2 Protocol Tunnel PDUs are terminated on this port or sdp"
DEFVAL { disabled }
::= { sdpBindTlsEntry 37 }
sdpBindTlsBpduTranslation OBJECT-TYPE
SYNTAX TlsBpduTranslation
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsBpduTranslation specifies whether
received L2 Protocol Tunnel PDUs are translated before being sent out
on this port or sap"
DEFVAL { disabled }
::= { sdpBindTlsEntry 38 }
sdpBindTlsStpRootGuard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpRootGuard specifies whether this
port is allowed to become STP root port. It corresponds to the
parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of
spanning tree connectivity."
DEFVAL { false }
::= { sdpBindTlsEntry 39 }
sdpBindTlsStpInMstBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpInMstBpdus indicates the number
of Multiple Spanning Tree (Mst) BPDUs received on this SDP."
::= { sdpBindTlsEntry 40 }
sdpBindTlsStpOutMstBpdus OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpOutMstBpdus indicates the number
of Multiple Spanning Tree (Mst) BPDUs sent out on this SDP."
::= { sdpBindTlsEntry 41 }
sdpBindTlsStpRxdDesigBridge OBJECT-TYPE
SYNTAX BridgeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsStpRxdDesigBridge
indicates the designated Bridge Identifier in the last
BPDU which was received on this SDP."
::= { sdpBindTlsEntry 42 }
sdpBindTlsMacMoveNextUpTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsMacMoveNextUpTime counts down the
time in seconds until a SDP bind that has been brought down due to
exceeding the TLS svcTlsMacMoveMaxRate, sdpBindOperFlags
'relearnLimitExceeded', is automatically brought up again.
When this value is 0xffff, the SDP bind will never be automatically
brought up.
When sdpBindOperStatus is 'up', this object counts down the time in
seconds until the value of sdpBindTlsMacMoveRateExcdLeft is reset."
::= { sdpBindTlsEntry 43 }
sdpBindTlsMacMoveRateExcdLeft OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsMacMoveRateExcdLeft counts down the
number of times this SDP bind can exceed the TLS svcTlsMacMoveMaxRate
and still be automatically brought up."
::= { sdpBindTlsEntry 44 }
sdpBindTlsLimitMacMoveLevel OBJECT-TYPE
SYNTAX TlsLimitMacMoveLevel
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsLimitMacMoveLevel specifies the
hierarchy in which spoke-SDPs are blocked when a MAC-move limit is
exceeded. When a MAC is moving among multiple SAPs or spoke-SDPs, the
SAP bind or spoke-SDP bind with the lower level is blocked first.
(tertiary is the lowest)"
DEFVAL { tertiary }
::= { sdpBindTlsEntry 45 }
sdpBindTlsBpduTransOper OBJECT-TYPE
SYNTAX INTEGER {
undefined (1),
disabled (2),
pvst (3),
stp (4),
pvst-rw (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsBpduTransOper indicates the
operational BPDU encapsulation used for BPDU translated frames."
::= { sdpBindTlsEntry 46 }
sdpBindTlsL2ptProtocols OBJECT-TYPE
SYNTAX L2ptProtocols
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsL2ptProtocols specifies which L2
Protocol Tunnel PDUs are terminated on this port or sdp"
DEFVAL { {stp} }
::= { sdpBindTlsEntry 47 }
sdpBindTlsIgnoreStandbySig OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindTlsIgnoreStandbySig specifies whether the local
internal tasks will take into account the 'pseudo-wire forwarding
standby' bit received from the LDP peer which is normally ignored.
When set to 'true', this bit is not considered in the internal tasks.
A similar object svcEndPointIgnoreStandbySig is present at
the endpoint level. If this spoke-SDP is part of that
explicit endpoint, this object will be set to the value of
svcEndPointIgnoreStandbySig and its value will not allowed
to be changed.
This spoke-SDP can be made part of an explicit endpoint only if the
setting of this object is not conflicting with the setting of
svcEndPointIgnoreStandbySig object."
DEFVAL { false }
::= { sdpBindTlsEntry 48 }
sdpBindTlsBlockOnMeshFail OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindTlsBlockOnMeshFail specifies that the operational
status of this spoke SDP will consider operational status of
associated mesh SDPs in this service.
If there are no mesh SDPs in the service, value of this object is
ignored.
When this object is set to 'true', then the operational
status of this spoke SDP will be 'down' until the
operational status of at least one mesh SDP in this service
is 'up'.
When set to 'false', the operational status of this spoke SDP does not
consider the operational status of any mesh SDPs in the service."
DEFVAL { false }
::= { sdpBindTlsEntry 49 }
sdpBindTlsInTcBitBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsInTcBitBpdus indicates the number
BPDUs received on this SDP Bind with the Topology Change bit set."
::= { sdpBindTlsEntry 50 }
sdpBindTlsOutTcBitBpdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsOutTcBitBpdus indicates the number
BPDUs sent out this SDP Bind with the Topology Change bit set."
::= { sdpBindTlsEntry 51 }
sdpBindTlsRestProtSrcMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsRestProtSrcMac specifies how the
agent will handle relearn requests for protected MAC addresses. When
the value of this object is 'true' requests to relearn a protected MAC
address will be ignored.
In addition, if the value of sdpBindTlsRestProtSrcMacAction is
'disable', then the SDP-BIND where the protected source MAC was seen
will be brought operationally down."
DEFVAL { false }
::= { sdpBindTlsEntry 52 }
sdpBindTlsRestProtSrcMacAction OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
alarmOnly (2),
discardFrame (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsRestProtSrcMacAction indicates the
action to take whenever a relearn request for a protected MAC is
received on a restricted SAP.
When the value of this object is 'disable' the SAP will be placed in
the operational down state, with the operating flag 'recProtSrcMac'
set.
When the value of this object is 'alarmOnly', the SDP-BIND
will be left up and only a notification,
sdpBindReceivedProtSrcMac, will be generated.
When the value of this object is 'discardFrame', the SDP-BIND will
start discarding the frame in addition to generating
sdpBindReceivedProtSrcMac notification."
DEFVAL { disable }
::= { sdpBindTlsEntry 53 }
sdpBindTlsAutoLearnMacProtect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindTlsAutoLearnMacProtect specifies whether to enable
automatic population of the MAC protect list with source MAC addresses
learned on the associated SDP binding."
DEFVAL { false }
::= { sdpBindTlsEntry 54 }
sdpBindDisableSendBvplsEvpnFlush OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindDisableSendBvplsEvpnFlush specifies whether to
send a isid based cmac flush indication when the sdp-bind goes
oper-down."
DEFVAL { false }
::= { sdpBindTlsEntry 55 }
sdpBindTlsRestProtSrcMacOper OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsRestProtSrcMacOper indicates the
operational state of the Restrict Protected Source MAC feature."
::= { sdpBindTlsEntry 56 }
sdpBindTlsRestProtSrcMacOperAct OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
alarmOnly (2),
discardFrame (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindTlsRestProtSrcMacOperAct indicates the
operational state of the Restrict Protected Source MAC action."
::= { sdpBindTlsEntry 57 }
sdpBindTlsAutoLrnMacPrtExcList OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindTlsAutoLrnMacPrtExcList specifies mac-list name
which contains MAC addresses to be excluded from auto learn mac
protect"
DEFVAL { "" }
::= { sdpBindTlsEntry 58 }
sdpBindTlsLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsLastMgmtChange indicates the sysUpTime at the
time of the last modification of this entry.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { sdpBindTlsEntry 59 }
sdpBindMeshTlsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindMeshTlsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains TLS Mesh SDP Bind information."
::= { tmnxSdpObjs 7 }
sdpBindMeshTlsEntry OBJECT-TYPE
SYNTAX SdpBindMeshTlsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TLS specific information about an Mesh SDP Bind."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindMeshTlsTable 1 }
SdpBindMeshTlsEntry ::= SEQUENCE
{
sdpBindMeshTlsPortState TStpPortState,
sdpBindMeshTlsHoldDownTimer INTEGER,
sdpBindMeshTlsTransitionState INTEGER,
sdpBindMeshTlsNotInMstRegion TruthValue,
sdpBindMeshTlsRestProtSrcMac TruthValue,
sdpBindMeshTlsRestProtSrcMacAct INTEGER,
sdpBindMeshTlsAutoLearnMacProt TruthValue,
sdpBindMeshTlsRPSMacOper TruthValue,
sdpBindMeshTlsRPSMacOperAct INTEGER,
sdpBindMeshTlsAutLrnMacPrtExcLs TNamedItemOrEmpty
}
sdpBindMeshTlsPortState OBJECT-TYPE
SYNTAX TStpPortState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the actual state of the Mesh SDP. If the sdp is
operationally down, the port will be in the 'disabled' state. If the
sdp is operationally up, the state will be 'forwarding' unless the
hold-down timer is active in which case the state will be
'discarding'."
::= { sdpBindMeshTlsEntry 1 }
sdpBindMeshTlsHoldDownTimer OBJECT-TYPE
SYNTAX INTEGER {
not-active (1),
active (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the hold-down timer is active, all traffic coming
from this mesh sdp will be blocked. This timer will be
activated for any of the following cases:
1. when a mesh SDP becomes operational;
2. when a 'disputed' BPDU is received over this mesh sdp;
This is typically a symptom of one way communication
(the peer at the other side of the mesh sdp does not
receive our BPDUs).
3. when a MSTP BPDU from outside the region is received
over this mesh SDP."
::= { sdpBindMeshTlsEntry 2 }
sdpBindMeshTlsTransitionState OBJECT-TYPE
SYNTAX INTEGER {
not-applicable (1),
waiting-for-agreement (2),
agreement-received (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether we already received an agreement from
the peer connected via this mesh sdp. RSTP expects an agreement from
every peer after sending a proposal over the VCP when it wants to
transition the latter to the forwarding state. This object is only
relevant when the role of the VCP is 'designated'. Not receiving an
agreement is typically caused by an improperly configured sdp or by a
non rstp enabled peer."
::= { sdpBindMeshTlsEntry 3 }
sdpBindMeshTlsNotInMstRegion OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object sdpBindMeshTlsNotInMstRegion indicates whether we received
a BPDU from another MST-region on this mesh SDP.
If set to 'true' then the object sdpBindMeshTlsHoldDownTimer will have
the value 'active'.
It is up to the operator to make sure bridges connected via mesh SDPs
are in the same MST-region. If not the mesh will NOT become
operational."
::= { sdpBindMeshTlsEntry 4 }
sdpBindMeshTlsRestProtSrcMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindMeshTlsRestProtSrcMac specifies how the
agent will handle relearn requests for protected MAC addresses. When
the value of this object is 'true' requests to relearn a protected MAC
address will be ignored.
In addition, if the value of sdpBindMeshTlsRestProtSrcMacAct is
'disable', then the SDP-BIND where the protected source MAC was seen
will be brought operationally down."
DEFVAL { false }
::= { sdpBindMeshTlsEntry 5 }
sdpBindMeshTlsRestProtSrcMacAct OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
alarmOnly (2),
discardFrame (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindMeshTlsRestProtSrcMacAct indicates the
action to take whenever a relearn request for a protected MAC is
received on a restricted SAP.
When the value of this object is 'disable' the SAP will be placed in
the operational down state, with the operating flag 'recProtSrcMac'
set.
When the value of this object is 'alarmOnly', the SDP-BIND
will be left up and only a notification,
sdpBindReceivedProtSrcMac, will be generated.
When the value of this object is 'discardFrame', the SDP-BIND will
start discarding the frame in addition to generating
sdpBindReceivedProtSrcMac notification."
DEFVAL { disable }
::= { sdpBindMeshTlsEntry 6 }
sdpBindMeshTlsAutoLearnMacProt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindMeshTlsAutoLearnMacProt specifies whether to
enable automatic population of the MAC protect list with source MAC
addresses learned on the associated SDP binding."
DEFVAL { false }
::= { sdpBindMeshTlsEntry 7 }
sdpBindMeshTlsRPSMacOper OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindMeshTlsRPSMacOper indicates the
operational state of Restrict Protected Source feature."
::= { sdpBindMeshTlsEntry 8 }
sdpBindMeshTlsRPSMacOperAct OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
alarmOnly (2),
discardFrame (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindMeshTlsRPSMacOperAct indicates the
operational state of the Restrict Protected Source MAC action."
::= { sdpBindMeshTlsEntry 9 }
sdpBindMeshTlsAutLrnMacPrtExcLs OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindMeshTlsAutLrnMacPrtExcLs specifies mac-list name
which contains MAC addresses to be excluded from auto learn mac
protect"
DEFVAL { "" }
::= { sdpBindMeshTlsEntry 10 }
sdpBindApipeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindApipeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpBindApipeTable has an entry for each apipe sdpBind configured
on this system."
::= { tmnxSdpObjs 8 }
sdpBindApipeEntry OBJECT-TYPE
SYNTAX SdpBindApipeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a particular sdpBind related to a particular
Apipe service entry. Entries are created/deleted by the user."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindApipeTable 1 }
SdpBindApipeEntry ::= SEQUENCE
{
sdpBindApipeAdminConcatCellCount Integer32,
sdpBindApipeSigConcatCellCount Integer32,
sdpBindApipeOperConcatCellCount Integer32,
sdpBindApipeConcatMaxDelay Integer32,
sdpBindApipeConcatCellClp TruthValue,
sdpBindApipeConcatCellAal5Fr TruthValue
}
sdpBindApipeAdminConcatCellCount OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindApipeAdminConcatCellCount specifies
the maximum number of ATM cells to accumulate
into an MPLS packet. The remote peer will also signal the
maximum number of concatenated cells it is willing to
accept in an MPLS packet. When the lesser of (the
configured value and the signaled value) number of cells
is reached, the MPLS packet is queued for transmission
onto the pseudowire."
DEFVAL { 1 }
::= { sdpBindApipeEntry 1 }
sdpBindApipeSigConcatCellCount OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindApipeSigConcatCellCount indicates the
maximum number of concatenated ATM cells the remote peer
is willing to accept. If there is no remote peer, or if
the label mapping has not been received, this object will
be zero (0)."
::= { sdpBindApipeEntry 2 }
sdpBindApipeOperConcatCellCount OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindApipeOperConcatCellCount indicates the maximum
number of concatenated ATM cells that will be sent on this SDP
binding."
::= { sdpBindApipeEntry 3 }
sdpBindApipeConcatMaxDelay OBJECT-TYPE
SYNTAX Integer32 (1..400)
UNITS "hundreds of microseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindApipeConcatMaxDelay object specifies
the maximum amount of time to wait while
performing ATM cell concatenation into an MPLS packet
before transmitting the MPLS packet. This places an upper
bound on the amount of delay introduced by the
concatenation process.
When this amount of time is reached from when the first
ATM cell for this MPLS packet was received, the MPLS
packet is queued for transmission onto the pseudowire."
DEFVAL { 400 }
::= { sdpBindApipeEntry 4 }
sdpBindApipeConcatCellClp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindApipeConcatCellClp specifies whether a CLP change
should be used as an indication to complete the cell concatenation
operation. When the value is 'true', CLP is used to indicate that cell
concatenation should be completed."
DEFVAL { false }
::= { sdpBindApipeEntry 5 }
sdpBindApipeConcatCellAal5Fr OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindApipeConcatCellAal5Fr specifies whether the AAL5
EOP (end of packet) should be used as an indication to complete the
cell concatenation operation. When the value is 'true', EOP is used to
indicate that cell concatenation should be completed."
DEFVAL { false }
::= { sdpBindApipeEntry 6 }
sdpBindDhcpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindDhcpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains DHCP information related to a SDP Bind.
A row will exist in this table for each spoke or
mesh SDP in a Tls Service. Rows are created and deleted
automatically by the system."
::= { tmnxSdpObjs 9 }
sdpBindDhcpInfoEntry OBJECT-TYPE
SYNTAX SdpBindDhcpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP specific information about an SDP Bind."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindDhcpInfoTable 1 }
SdpBindDhcpInfoEntry ::= SEQUENCE
{
sdpBindDhcpDescription ServObjDesc,
sdpBindDhcpSnoop TmnxEnabledDisabled
}
sdpBindDhcpDescription OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpDescription specifies a user
provided description for DHCP on this Sdp Bind."
DEFVAL { ''H }
::= { sdpBindDhcpInfoEntry 1 }
sdpBindDhcpSnoop OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpSnoop specifies whether or not DHCP
snooping is enabled on the Sdp Bind."
DEFVAL { disabled }
::= { sdpBindDhcpInfoEntry 2 }
sdpBindDhcpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindDhcpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"sdpBindDhcpStatsTable contains DHCP statistics related
to a TLS SDP Bind. A row will exist in this table for
each spoke or mesh SDP in a Tls Service. Rows are
created and deleted automatically by the system."
::= { tmnxSdpObjs 10 }
sdpBindDhcpStatsEntry OBJECT-TYPE
SYNTAX SdpBindDhcpStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP statistics for a TLS spoke SDP or mesh SDP."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindDhcpStatsTable 1 }
SdpBindDhcpStatsEntry ::= SEQUENCE
{
sdpBindDhcpStatsClntSnoopdPckts Counter32,
sdpBindDhcpStatsSrvrSnoopdPckts Counter32,
sdpBindDhcpStatsClntForwdPckts Counter32,
sdpBindDhcpStatsSrvrForwdPckts Counter32,
sdpBindDhcpStatsClntDropdPckts Counter32,
sdpBindDhcpStatsSrvrDropdPckts Counter32,
sdpBindDhcpStatsClntProxRadPckts Counter32,
sdpBindDhcpStatsClntProxLSPckts Counter32,
sdpBindDhcpStatsGenReleasePckts Counter32,
sdpBindDhcpStatsGenForceRenPckts Counter32,
sdpBindDhcpStatsClntProxUDBPckts Counter32,
sdpBindDhcpStatsClntProxNqPckts Counter32
}
sdpBindDhcpStatsClntSnoopdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpStatsClntSnoopdPckts
indicates the number of DHCP client packets that have
been snooped on this SDP bind."
::= { sdpBindDhcpStatsEntry 1 }
sdpBindDhcpStatsSrvrSnoopdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpStatsSrvrSnoopdPckts
indicates the number of DHCP server packets that have
been snooped on this SDP bind."
::= { sdpBindDhcpStatsEntry 2 }
sdpBindDhcpStatsClntForwdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpStatsClntForwdPckts
indicates the number of DHCP client packets that have
been forwarded on this SDP bind."
::= { sdpBindDhcpStatsEntry 3 }
sdpBindDhcpStatsSrvrForwdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpStatsSrvrForwdPckts
indicates the number of DHCP server packets that have
been forwarded on this SDP bind."
::= { sdpBindDhcpStatsEntry 4 }
sdpBindDhcpStatsClntDropdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpStatsClntDropdPckts
indicates the number of DHCP client packets that have
been dropped on this SDP bind."
::= { sdpBindDhcpStatsEntry 5 }
sdpBindDhcpStatsSrvrDropdPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpStatsSrvrDropdPckts
indicates the number of DHCP server packets that have
been dropped on this SDP bind."
::= { sdpBindDhcpStatsEntry 6 }
sdpBindDhcpStatsClntProxRadPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpStatsClntProxRadPckts indicates the
number of DHCP client packets that have been proxied on this SDP bind
based on data received from a RADIUS server."
::= { sdpBindDhcpStatsEntry 7 }
sdpBindDhcpStatsClntProxLSPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpStatsClntProxLSPckts indicates the
number of DHCP client packets that have been proxied on this SDP bind
based on a lease state. The lease itself can have been obtained from a
DHCP or RADIUS server. This is the so called lease split
functionality."
::= { sdpBindDhcpStatsEntry 8 }
sdpBindDhcpStatsGenReleasePckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpStatsGenReleasePckts indicates the
number of DHCP RELEASE messages spoofed on this SDP bind to the DHCP
server."
::= { sdpBindDhcpStatsEntry 9 }
sdpBindDhcpStatsGenForceRenPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpStatsGenForceRenPckts indicates the
number of DHCP FORCERENEW messages spoofed on this SDP bind to the
DHCP clients."
::= { sdpBindDhcpStatsEntry 10 }
sdpBindDhcpStatsClntProxUDBPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpStatsClntProxUDBPckts indicates the
number of DHCP client packets that have been proxied on the local user
database."
::= { sdpBindDhcpStatsEntry 11 }
sdpBindDhcpStatsClntProxNqPckts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcpStatsClntProxNqPckts indicates the
number of DHCP client packets that have been proxied on this SDP bind
based on data received from a Diameter NASREQ server."
::= { sdpBindDhcpStatsEntry 12 }
sdpBindIpipeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindIpipeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpBindIpipeTable has an entry for each IPIPE sdpBind configured
on this system."
::= { tmnxSdpObjs 11 }
sdpBindIpipeEntry OBJECT-TYPE
SYNTAX SdpBindIpipeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a particular sdpBind related to a particular
IPIPE service entry. Entries are created/deleted by the user."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindIpipeTable 1 }
SdpBindIpipeEntry ::= SEQUENCE
{
sdpBindIpipeCeInetAddressType InetAddressType,
sdpBindIpipeCeInetAddress InetAddress,
sdpBindIpipePeerCeInetAddrType InetAddressType,
sdpBindIpipePeerCeInetAddr InetAddress,
sdpBindIpipePeerIpv6Capability TruthValue,
sdpBindIpipePeerLLCeInetAddr InetAddress,
sdpBindIpipePeerGlobalCeInetAddr InetAddress
}
sdpBindIpipeCeInetAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindIpipeCeInetAddressType
specifies the address type of the IP address of the CE
device reachable through this IPIPE SDP binding.
This object is only configurable if the value of
'svcIpipeCeAddressDiscovery' is 'disabled."
::= { sdpBindIpipeEntry 1 }
sdpBindIpipeCeInetAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of this address is determined by the value of the
sdpBindIpipeCeInetAddressType object.
This object specifies the IPv4 address of the CE device reachable
through this SDP binding.
This object is only configurable if the value of
'svcIpipeCeAddressDiscovery' is 'disabled."
::= { sdpBindIpipeEntry 2 }
sdpBindIpipePeerCeInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of 'svcIpipeCeAddressDiscovery' is enabled,
the value of the object sdpBindIpipeCeInetAddressType
indicates the address type of the IP address of the CE
device that is learned via LDP on this IPIPE SDP binding."
::= { sdpBindIpipeEntry 3 }
sdpBindIpipePeerCeInetAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of 'svcIpipeCeAddressDiscovery' is enabled, the type of
this address is determined by the value of the
sdpBindIpipeCeInetAddressType object.
This object indicates the IPv4 address of the
CE device that is learned via LDP on this SDP binding."
::= { sdpBindIpipeEntry 4 }
sdpBindIpipePeerIpv6Capability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindIpipePeerIpv6Capability indicates whether the far
end sent us the IPv6 Stack capability TLV."
::= { sdpBindIpipeEntry 5 }
sdpBindIpipePeerLLCeInetAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of svcIpipeIpv6CeAddressDiscovery is
'enabled (1)', this object indicates the discovered link
local IPv6 address of the far end CE device that is learned
via NS/NA messages received on this SDP binding."
::= { sdpBindIpipeEntry 6 }
sdpBindIpipePeerGlobalCeInetAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of svcIpipeIpv6CeAddressDiscovery is
'enabled (1)', this object indicates the discovered global
IPv6 address of the far end CE device that is learned via
NS/NA messages received on this SDP binding."
::= { sdpBindIpipeEntry 7 }
sdpFCMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpFCMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpFCMappingTable has an entry for each FC mapping on an SDP
configured on this system."
::= { tmnxSdpObjs 12 }
sdpFCMappingEntry OBJECT-TYPE
SYNTAX SdpFCMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a particular FC to LSP ID mapping on an SDP.
Entries are created/deleted by the user."
INDEX {
sdpId,
sdpFCMappingFCName
}
::= { sdpFCMappingTable 1 }
SdpFCMappingEntry ::= SEQUENCE
{
sdpFCMappingFCName TNamedItem,
sdpFCMappingRowStatus RowStatus,
sdpFCMappingLspId TmnxVRtrMplsLspID
}
sdpFCMappingFCName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of sdpFCMappingFCName specifies the forwarding class for
which this mapping is defined, in the SDP indexed by 'sdpId'."
::= { sdpFCMappingEntry 1 }
sdpFCMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpFCMappingRowStatus is used for the creation and
deletion of forwarding class to LSP mappings."
::= { sdpFCMappingEntry 2 }
sdpFCMappingLspId OBJECT-TYPE
SYNTAX TmnxVRtrMplsLspID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpFCMappingLspId specifies the LSP ID that traffic
corresponding to the class specified in sdpFCMappingFCName will be
forwarded on. This object MUST be specified at row creation time."
::= { sdpFCMappingEntry 3 }
sdpBindTlsMfibAllowedMdaTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsMfibAllowedMdaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpBindTlsMfibAllowedMdaTable has an entry for each MFIB allowed
MDA destination for an SDP Binding configured in the system."
::= { tmnxSdpObjs 13 }
sdpBindTlsMfibAllowedMdaEntry OBJECT-TYPE
SYNTAX SdpBindTlsMfibAllowedMdaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an MFIB allowed MDA destination for an SDP
Binding configured in the system. Entries can be created and deleted
via SNMP SET operations on the object sdpBindTlsMfibMdaRowStatus."
INDEX {
svcId,
sdpBindId,
tmnxChassisIndex,
tmnxCardSlotNum,
tmnxMDASlotNum
}
::= { sdpBindTlsMfibAllowedMdaTable 1 }
SdpBindTlsMfibAllowedMdaEntry ::= SEQUENCE
{ sdpBindTlsMfibMdaRowStatus RowStatus }
sdpBindTlsMfibMdaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindTlsMfibMdaRowStatus controls the creation and
deletion of rows in this table."
::= { sdpBindTlsMfibAllowedMdaEntry 1 }
sdpBindCpipeTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindCpipeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpBindCpipeTable has an entry for each cpipe sdpBind configured
on this system."
::= { tmnxSdpObjs 15 }
sdpBindCpipeEntry OBJECT-TYPE
SYNTAX SdpBindCpipeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents a particular sdpBind related to a particular
Cpipe service entry. Entries are created/deleted by the user."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindCpipeTable 1 }
SdpBindCpipeEntry ::= SEQUENCE
{
sdpBindCpipeLocalPayloadSize Unsigned32,
sdpBindCpipePeerPayloadSize Unsigned32,
sdpBindCpipeLocalBitrate Unsigned32,
sdpBindCpipePeerBitrate Unsigned32,
sdpBindCpipeLocalSigPkts TdmOptionsSigPkts,
sdpBindCpipePeerSigPkts TdmOptionsSigPkts,
sdpBindCpipeLocalCasTrunkFraming TdmOptionsCasTrunkFraming,
sdpBindCpipePeerCasTrunkFraming TdmOptionsCasTrunkFraming,
sdpBindCpipeLocalUseRtpHeader TruthValue,
sdpBindCpipePeerUseRtpHeader TruthValue,
sdpBindCpipeLocalDifferential TruthValue,
sdpBindCpipePeerDifferential TruthValue,
sdpBindCpipeLocalTimestampFreq Unsigned32,
sdpBindCpipePeerTimestampFreq Unsigned32
}
sdpBindCpipeLocalPayloadSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the local payload size (in bytes)."
::= { sdpBindCpipeEntry 1 }
sdpBindCpipePeerPayloadSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the remote payload size (in bytes). If there is
no remote peer, or if the label mapping has not been received, or if
this value has not been received from the remote peer then this object
will be zero (0)."
::= { sdpBindCpipeEntry 2 }
sdpBindCpipeLocalBitrate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "sixty-four kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the local bit-rate in multiples of 64 Kbit/s."
::= { sdpBindCpipeEntry 3 }
sdpBindCpipePeerBitrate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "sixty-four kilobps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the remote bit-rate in multiples of 64 Kbit/s.
If there is no remote peer, or if the label mapping has not been
received, or if this value has not been received from the remote peer
then this object will be zero (0)."
::= { sdpBindCpipeEntry 4 }
sdpBindCpipeLocalSigPkts OBJECT-TYPE
SYNTAX TdmOptionsSigPkts
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the local CE application signalling packets
mode."
::= { sdpBindCpipeEntry 5 }
sdpBindCpipePeerSigPkts OBJECT-TYPE
SYNTAX TdmOptionsSigPkts
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the remote CE application signalling packets
mode. If there is no remote peer, or if the label mapping has not been
received, or if the remote peer does not support signalling packets
then this object will be zero (0)."
::= { sdpBindCpipeEntry 6 }
sdpBindCpipeLocalCasTrunkFraming OBJECT-TYPE
SYNTAX TdmOptionsCasTrunkFraming
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the local CAS trunk framing mode."
::= { sdpBindCpipeEntry 7 }
sdpBindCpipePeerCasTrunkFraming OBJECT-TYPE
SYNTAX TdmOptionsCasTrunkFraming
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the remote CAS trunk framing mode. If there is
no remote peer, or if the label mapping has not been received, or if
the remote peer does not support CAS trunk framing then this object
will be zero (0)."
::= { sdpBindCpipeEntry 8 }
sdpBindCpipeLocalUseRtpHeader OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether a RTP header is used when packets are
transmitted to the remote peer, and the local peer expects a RTP
header when packets are received from the remote peer."
::= { sdpBindCpipeEntry 9 }
sdpBindCpipePeerUseRtpHeader OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether a RTP header is used when packets are
transmitted by the remote peer, and the remote peer expects a RTP
header when packets are received from the local peer. If there is no
remote peer, or if the label mapping has not been received, or if the
remote peer does not support RTP headers then this object will be
'false'."
::= { sdpBindCpipeEntry 10 }
sdpBindCpipeLocalDifferential OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether differential timestamp mode is used in
the RTP header when packets are transmitted to the remote peer, and
the local peer expects differential timestamps in the RTP header when
packets are received from the remote peer."
::= { sdpBindCpipeEntry 11 }
sdpBindCpipePeerDifferential OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates whether differential timestamp mode is used in
the RTP header when packets are transmitted by the remote peer, and
the remote peer expects differential timestamps in the RTP header when
packets are received from the local peer. If there is no remote peer,
or if the label mapping has not been received, or if the remote peer
does not support differential timestamp mode then this object will be
'false'."
::= { sdpBindCpipeEntry 12 }
sdpBindCpipeLocalTimestampFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "8 KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the timestamp frequency used in the RTP header
when packets are transmitted to the remote peer, and the local peer
expects same timestamp frequency in the RTP header when packets are
received from the remote peer.
This value is in multiples of 8 KHz."
::= { sdpBindCpipeEntry 13 }
sdpBindCpipePeerTimestampFreq OBJECT-TYPE
SYNTAX Unsigned32
UNITS "8 KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the timestamp frequency used in the RTP header
when packets are transmitted by the remote peer, and the remote peer
expects the same timestamp frequency in the RTP header when packets
are received from the local peer. If there is no remote peer, or if
the label mapping has not been received, or if the remote peer does
not support support RTP headers then this object will be zero (0).
This value is in multiples of 8 KHz."
::= { sdpBindCpipeEntry 14 }
sdpBindTlsL2ptStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsL2ptStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains TLS spoke SDP Bind
Layer 2 Protocol Tunneling Statistics.
This table complements the sdpBindTlsTable. Rows in this
table are created and deleted automatically by the
system."
::= { tmnxSdpObjs 16 }
sdpBindTlsL2ptStatsEntry OBJECT-TYPE
SYNTAX SdpBindTlsL2ptStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"TLS specific information about an SDP Bind."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindTlsL2ptStatsTable 1 }
SdpBindTlsL2ptStatsEntry ::= SEQUENCE
{
sdpBindTlsL2ptStatsLastClearedTime TimeStamp,
sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx Counter32,
sdpBindTlsL2ptStatsStpConfigBpdusRx Counter32,
sdpBindTlsL2ptStatsStpConfigBpdusTx Counter32,
sdpBindTlsL2ptStatsStpRstBpdusRx Counter32,
sdpBindTlsL2ptStatsStpRstBpdusTx Counter32,
sdpBindTlsL2ptStatsStpTcnBpdusRx Counter32,
sdpBindTlsL2ptStatsStpTcnBpdusTx Counter32,
sdpBindTlsL2ptStatsPvstConfigBpdusRx Counter32,
sdpBindTlsL2ptStatsPvstConfigBpdusTx Counter32,
sdpBindTlsL2ptStatsPvstRstBpdusRx Counter32,
sdpBindTlsL2ptStatsPvstRstBpdusTx Counter32,
sdpBindTlsL2ptStatsPvstTcnBpdusRx Counter32,
sdpBindTlsL2ptStatsPvstTcnBpdusTx Counter32,
sdpBindTlsL2ptStatsOtherBpdusRx Counter32,
sdpBindTlsL2ptStatsOtherBpdusTx Counter32,
sdpBindTlsL2ptStatsOtherL2ptBpdusRx Counter32,
sdpBindTlsL2ptStatsOtherL2ptBpdusTx Counter32,
sdpBindTlsL2ptStatsOtherInvalidBpdusRx Counter32,
sdpBindTlsL2ptStatsOtherInvalidBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx Counter32,
sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx Counter32,
sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx Counter32,
sdpBindTlsL2ptStatsCdpBpdusRx Counter32,
sdpBindTlsL2ptStatsCdpBpdusTx Counter32,
sdpBindTlsL2ptStatsVtpBpdusRx Counter32,
sdpBindTlsL2ptStatsVtpBpdusTx Counter32,
sdpBindTlsL2ptStatsDtpBpdusRx Counter32,
sdpBindTlsL2ptStatsDtpBpdusTx Counter32,
sdpBindTlsL2ptStatsPagpBpdusRx Counter32,
sdpBindTlsL2ptStatsPagpBpdusTx Counter32,
sdpBindTlsL2ptStatsUdldBpdusRx Counter32,
sdpBindTlsL2ptStatsUdldBpdusTx Counter32
}
sdpBindTlsL2ptStatsLastClearedTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsLastClearedTime indicates the last
time that these stats were cleared. The value zero indicates that they
have not been cleared yet."
::= { sdpBindTlsL2ptStatsEntry 1 }
sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates
the number of L2PT encapsulated STP config bpdus received on this
spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 2 }
sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates
the number of L2PT encapsulated STP config bpdus transmitted on this
spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 3 }
sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the
number of L2PT encapsulated STP rst bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 4 }
sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the
number of L2PT encapsulated STP rst bpdus transmitted on this spoke
SDP."
::= { sdpBindTlsL2ptStatsEntry 5 }
sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the
number of L2PT encapsulated STP tcn bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 6 }
sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the
number of L2PT encapsulated STP tcn bpdus transmitted on this spoke
SDP."
::= { sdpBindTlsL2ptStatsEntry 7 }
sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates
the number of L2PT encapsulated PVST config bpdus received on this
spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 8 }
sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates
the number of L2PT encapsulated PVST config bpdus transmitted on this
spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 9 }
sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the
number of L2PT encapsulated PVST rst bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 10 }
sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the
number of L2PT encapsulated PVST rst bpdus transmitted on this spoke
SDP."
::= { sdpBindTlsL2ptStatsEntry 11 }
sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the
number of L2PT encapsulated PVST tcn bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 12 }
sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the
number of L2PT encapsulated PVST tcn bpdus transmitted on this spoke
SDP."
::= { sdpBindTlsL2ptStatsEntry 13 }
sdpBindTlsL2ptStatsStpConfigBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsStpConfigBpdusRx indicates the number
of STP config bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 14 }
sdpBindTlsL2ptStatsStpConfigBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsStpConfigBpdusTx indicates the number
of STP config bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 15 }
sdpBindTlsL2ptStatsStpRstBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsStpRstBpdusRx indicates the number of
STP rst bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 16 }
sdpBindTlsL2ptStatsStpRstBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsStpRstBpdusTx indicates the number of
STP rst bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 17 }
sdpBindTlsL2ptStatsStpTcnBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsStpTcnBpdusRx indicates the number of
STP tcn bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 18 }
sdpBindTlsL2ptStatsStpTcnBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsStpTcnBpdusTx indicates the number of
STP tcn bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 19 }
sdpBindTlsL2ptStatsPvstConfigBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsPvstConfigBpdusRx indicates the number
of PVST config bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 20 }
sdpBindTlsL2ptStatsPvstConfigBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsPvstConfigBpdusTx indicates the number
of PVST config bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 21 }
sdpBindTlsL2ptStatsPvstRstBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsPvstRstBpdusRx indicates the number of
PVST rst bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 22 }
sdpBindTlsL2ptStatsPvstRstBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsPvstRstBpdusTx indicates the number of
PVST rst bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 23 }
sdpBindTlsL2ptStatsPvstTcnBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsPvstTcnBpdusRx indicates the number of
PVST tcn bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 24 }
sdpBindTlsL2ptStatsPvstTcnBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsPvstTcnBpdusTx indicates the number of
PVST tcn bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 25 }
sdpBindTlsL2ptStatsOtherBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsOtherBpdusRx indicates the number of
other bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 26 }
sdpBindTlsL2ptStatsOtherBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsOtherBpdusTx indicates the number of
other bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 27 }
sdpBindTlsL2ptStatsOtherL2ptBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsOtherL2ptBpdusRx indicates the number
of other L2PT bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 28 }
sdpBindTlsL2ptStatsOtherL2ptBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsOtherL2ptBpdusTx indicates the number
of other L2PT bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 29 }
sdpBindTlsL2ptStatsOtherInvalidBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsOtherInvalidBpdusRx indicates the
number of other invalid bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 30 }
sdpBindTlsL2ptStatsOtherInvalidBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsOtherInvalidBpdusTx indicates the
number of other invalid bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 31 }
sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the
number of L2PT encapsulated CDP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 32 }
sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the
number of L2PT encapsulated CDP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 33 }
sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the
number of L2PT encapsulated VTP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 34 }
sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the
number of L2PT encapsulated VTP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 35 }
sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the
number of L2PT encapsulated DTP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 36 }
sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the
number of L2PT encapsulated DTP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 37 }
sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the
number of L2PT encapsulated PAGP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 38 }
sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the
number of L2PT encapsulated PAGP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 39 }
sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the
number of L2PT encapsulated UDLD bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 40 }
sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the
number of L2PT encapsulated UDLD bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 41 }
sdpBindTlsL2ptStatsCdpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsCdpBpdusRx indicates the number of CDP
bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 42 }
sdpBindTlsL2ptStatsCdpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsCdpBpdusTx indicates the number of CDP
bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 43 }
sdpBindTlsL2ptStatsVtpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsVtpBpdusRx indicates the number of VTP
bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 44 }
sdpBindTlsL2ptStatsVtpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsVtpBpdusTx indicates the number of VTP
bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 45 }
sdpBindTlsL2ptStatsDtpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsDtpBpdusRx indicates the number of DTP
bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 46 }
sdpBindTlsL2ptStatsDtpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsDtpBpdusTx indicates the number of DTP
bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 47 }
sdpBindTlsL2ptStatsPagpBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsPagpBpdusRx indicates the number of
PAGP bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 48 }
sdpBindTlsL2ptStatsPagpBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsPagpBpdusTx indicates the number of
PAGP bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 49 }
sdpBindTlsL2ptStatsUdldBpdusRx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsUdldBpdusRx indicates the number of
UDLD bpdus received on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 50 }
sdpBindTlsL2ptStatsUdldBpdusTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsL2ptStatsUdldBpdusTx indicates the number of
UDLD bpdus transmitted on this spoke SDP."
::= { sdpBindTlsL2ptStatsEntry 51 }
pwTemplateTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of pwTemplateTableLastChanged indicates the sysUpTime at the
time of the last modification of pwTemplateTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 17 }
pwTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains entries for pseudowire (PW) templates specifying
SDP auto-binding."
::= { tmnxSdpObjs 18 }
pwTemplateEntry OBJECT-TYPE
SYNTAX PwTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific PW template."
INDEX { pwTemplateId }
::= { pwTemplateTable 1 }
PwTemplateEntry ::= SEQUENCE
{
pwTemplateId PWTemplateId,
pwTemplateRowStatus RowStatus,
pwTemplateLastChanged TimeStamp,
pwTemplateUseProvisionedSdp TruthValue,
pwTemplateVcType SdpBindVcType,
pwTemplateAccountingPolicyId Unsigned32,
pwTemplateCollectAcctStats TruthValue,
pwTemplateMacLearning TmnxEnabledDisabled,
pwTemplateMacAgeing TmnxEnabledDisabled,
pwTemplateDiscardUnknownSource TmnxEnabledDisabled,
pwTemplateLimitMacMove TlsLimitMacMove,
pwTemplateMacPinning TmnxEnabledDisabled,
pwTemplateVlanVcTag Unsigned32,
pwTemplateMacAddressLimit Unsigned32,
pwTemplateShgName TNamedItemOrEmpty,
pwTemplateShgDescription TItemDescription,
pwTemplateShgRestProtSrcMac TruthValue,
pwTemplateShgRestUnprotDstMac TruthValue,
pwTemplateEgressMacFilterId TFilterID,
pwTemplateEgressIpFilterId TFilterID,
pwTemplateEgressIpv6FilterId TFilterID,
pwTemplateIngressMacFilterId TFilterID,
pwTemplateIngressIpFilterId TFilterID,
pwTemplateIngressIpv6FilterId TFilterID,
pwTemplateIgmpFastLeave TmnxEnabledDisabled,
pwTemplateIgmpImportPlcy TNamedItemOrEmpty,
pwTemplateIgmpLastMembIntvl Unsigned32,
pwTemplateIgmpMaxNbrGrps Unsigned32,
pwTemplateIgmpGenQueryIntvl Unsigned32,
pwTemplateIgmpQueryRespIntvl Unsigned32,
pwTemplateIgmpRobustCount Unsigned32,
pwTemplateIgmpSendQueries TmnxEnabledDisabled,
pwTemplateIgmpMcacPolicyName TPolicyStatementNameOrEmpty,
pwTemplateIgmpMcacUnconstBW Integer32,
pwTemplateIgmpMcacPrRsvMndBW Integer32,
pwTemplateIgmpVersion TmnxIgmpVersion,
pwTemplateForceVlanVcForwarding TruthValue,
pwTemplateHashLabel TruthValue,
pwTemplateControlWord TruthValue,
pwTemplateHashLabelSignalCap TruthValue,
pwTemplateRestProtSrcMac TruthValue,
pwTemplateRestProtSrcMacAction INTEGER,
pwTemplateAutoLearnMacProtect TruthValue,
pwTemplateShgRestProtSrcMacAct INTEGER,
pwTemplateShgAutoLearnMacProtect TruthValue,
pwTemplateIngQoSNetworkPlcyId TSdpIngressPolicyID,
pwTemplateEgrQoSNetworkPlcyId TSdpEgressPolicyID,
pwTemplateIngQoSFpRedirectQGrp TNamedItemOrEmpty,
pwTemplateEgrQoSPortRedirectQGrp TNamedItemOrEmpty,
pwTemplateIngQoSInstanceId TQosQGrpInstanceIDorZero,
pwTemplateEgrQoSInstanceId TQosQGrpInstanceIDorZero,
pwTemplateBlockOnPeerFault TruthValue,
pwTemplateForceQinqVcForwarding TruthValue,
pwTemplatePreferProvSdp TruthValue,
pwTemplateEntropyLabel TruthValue,
pwTemplateName TLNamedItemOrEmpty,
pwTemplateGreDelivery TruthValue,
pwTemplateIngQoSNetworkPlcyName TLNamedItemOrEmpty,
pwTemplateEgrQoSNetworkPlcyName TLNamedItemOrEmpty,
pwTemplateIngressIpFilterName TLNamedItemOrEmpty,
pwTemplateIngressIpv6FilterName TLNamedItemOrEmpty,
pwTemplateIngressMacFilterName TLNamedItemOrEmpty,
pwTemplateEgressIpFilterName TLNamedItemOrEmpty,
pwTemplateEgressIpv6FilterName TLNamedItemOrEmpty,
pwTemplateEgressMacFilterName TLNamedItemOrEmpty,
pwTemplateForceQinqVcFwding INTEGER
}
pwTemplateId OBJECT-TYPE
SYNTAX PWTemplateId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The PW template identifier."
::= { pwTemplateEntry 1 }
pwTemplateRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateRowStatus is used for the creation and deletion
of PW templates."
::= { pwTemplateEntry 2 }
pwTemplateLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of pwTemplateLastChanged indicates the sysUpTime at the time
of the last modification of this entry.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { pwTemplateEntry 3 }
pwTemplateUseProvisionedSdp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateUseProvisionedSdp specifies whether the to use
an already provisioned SDP. A value of 'true' specifies that the
tunnel manager will be consulted for an existing active SDP.
Otherwise, a value of 'false' specifies that the default SDP template
will be used to use for instantiation of the SDP."
DEFVAL { false }
::= { pwTemplateEntry 4 }
pwTemplateVcType OBJECT-TYPE
SYNTAX SdpBindVcType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateVcType specifies the type of virtual circuit
(VC) associated with the SDP Bind."
DEFVAL { ether }
::= { pwTemplateEntry 5 }
pwTemplateAccountingPolicyId OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateAccountingPolicyId specifies the policy to use
to collect accounting statistics on the SDP Bind. The value zero
indicates that the agent should use the default accounting policy, if
one exists."
DEFVAL { 0 }
::= { pwTemplateEntry 6 }
pwTemplateCollectAcctStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateCollectAcctStats specifies whether the agent
collects accounting statistics for the SDP Bind. When the value is
'true' the agent collects accounting statistics on the SDP Bind."
DEFVAL { false }
::= { pwTemplateEntry 7 }
pwTemplateMacLearning OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateMacLearning specifies whether the MAC learning
process is enabled for the SDP Bind. The value is ignored if MAC
learning is disabled at service level."
DEFVAL { enabled }
::= { pwTemplateEntry 8 }
pwTemplateMacAgeing OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateMacAgeing specifies whether the MAC aging
process is enabled for the SDP Bind. The value is ignored if MAC aging
is disabled at the service level."
DEFVAL { enabled }
::= { pwTemplateEntry 9 }
pwTemplateDiscardUnknownSource OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"With the object pwTemplateMacAddressLimit a limit can be configured
for the max number of MAC addresses that will be learned on the SDP
Bind (only for spoke SDPs). When the limit is reached, packets with
unknown source MAC address are forwarded by default. By setting
sdpBindTlsDiscardUnknownSource to 'enabled', packets with unknown
source MAC will be dropped instead."
DEFVAL { disabled }
::= { pwTemplateEntry 10 }
pwTemplateLimitMacMove OBJECT-TYPE
SYNTAX TlsLimitMacMove
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateLimitMacMove specifies the behavior for when
the relearn rate specified by svcTlsMacMoveMaxRate is exceeded.
When pwTemplateLimitMacMove value is set to 'blockable'
the agent will monitor the MAC relearn rate on the
SDP Bind, and it will block it when the relearn rate
specified by svcTlsMacMoveMaxRate is exceeded. When the
value is 'nonBlockable' the SDP Bind will not be
blocked, and another blockable SDP Bind will be
blocked instead."
DEFVAL { blockable }
::= { pwTemplateEntry 11 }
pwTemplateMacPinning OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateMacPinning specifies whether or not MAC address
pinning is active on the SDP Bind (mesh or spoke). Setting the value
to 'enabled' disables relearning of MAC addresses on other SAPs or
SDPs within the same VPLS; the MAC address will hence remain attached
to the SDP Bind for the duration of its age-timer. This object has
effect only for MAC addresses learned via the normal MAC learning
process, and not for entries learned via DHCP. The value will be set
by default to 'disabled'. However for a spoke SDP that belongs to a
residential SHG, the value is set to enabled by the system, and cannot
be altered by the operator."
DEFVAL { disabled }
::= { pwTemplateEntry 12 }
pwTemplateVlanVcTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateVlanVcTag specifies the VLAN VC tag for the SDP
Bind."
DEFVAL { '0fff'H }
::= { pwTemplateEntry 13 }
pwTemplateMacAddressLimit OBJECT-TYPE
SYNTAX Unsigned32 (0..511999)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateMacAddressLimit specifies the maximum number of
learned and static entries allowed in the FDB for the SDP Bind. The
value 0 specifies no limit for the SDP Bind. The command is valid only
for spoke SDPs.
The maximum value of this object depends on the platform/chassis mode."
DEFVAL { 0 }
::= { pwTemplateEntry 14 }
pwTemplateShgName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateShgName specifies the name of the split-horizon
group where the spoke SDP Bind belongs to. By default a spoke SDP Bind
does not belong to any split-horizon group. The name specified must
correspond to an existing split-horizon group in the TLS service where
the spoke SDP Bind is defined."
DEFVAL { "" }
::= { pwTemplateEntry 15 }
pwTemplateShgDescription OBJECT-TYPE
SYNTAX TItemDescription
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateShgDescription specifies a user-provided
description for split-horizon group on the SDP Bind."
DEFVAL { "" }
::= { pwTemplateEntry 16 }
pwTemplateShgRestProtSrcMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateShgRestProtSrcMac specifies how the agent will
handle relearn requests for protected MAC addresses. When the value of
this object is 'true' requests to relearn a protected MAC address will
be ignored."
DEFVAL { false }
::= { pwTemplateEntry 17 }
pwTemplateShgRestUnprotDstMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateShgRestUnprotDstMac specifies how the system
will forward packets destined to an unprotected MAC address. When the
value of this object is 'true' packets destined to an unprotected MAC
address will be dropped."
DEFVAL { false }
::= { pwTemplateEntry 18 }
pwTemplateEgressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateEgressMacFilterId specifies the tMacFilterId
which indexes an egress filter entry in
TIMETRA-FILTER-MIB::tMacFilterTable, or zero if no filter is
specified."
DEFVAL { 0 }
::= { pwTemplateEntry 19 }
pwTemplateEgressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateEgressIpFilterId specifies the tIPFilterId
which indexes an egress filter entry in
TIMETRA-FILTER-MIB::tIPFilterTable, or zero if no filter is specified."
DEFVAL { 0 }
::= { pwTemplateEntry 20 }
pwTemplateEgressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateEgressIpv6FilterId specifies the tIPv6FilterId
which indexes an egress filter entry in
TIMETRA-FILTER-MIB::tIPv6FilterTable, or zero if no filter is
specified."
DEFVAL { 0 }
::= { pwTemplateEntry 21 }
pwTemplateIngressMacFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIngressMacFilterId specifies the tMacFilterId
which indexes an ingress filter entry in
TIMETRA-FILTER-MIB::tMacFilterTable, or zero if no filter is
specified."
DEFVAL { 0 }
::= { pwTemplateEntry 22 }
pwTemplateIngressIpFilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIngressIpFilterId specifies the tIPFilterId
which indexes an ingress filter entry in
TIMETRA-FILTER-MIB::tIPFilterTable, or zero if no filter is specified."
DEFVAL { 0 }
::= { pwTemplateEntry 23 }
pwTemplateIngressIpv6FilterId OBJECT-TYPE
SYNTAX TFilterID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIngressIpv6FilterId specifies the tIPv6FilterId
which indexes an ingress filter entry in
TIMETRA-FILTER-MIB::tIPv6FilterTable, or zero if no filter is
specified."
DEFVAL { 0 }
::= { pwTemplateEntry 24 }
pwTemplateIgmpFastLeave OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpFastLeave specifies whether or not
fastleave is allowed on the SDP Bind.
If set to 'enabled', the system prunes the port on which an IGMP
'leave' message has been received without waiting for the Group
Specific Query to timeout."
DEFVAL { disabled }
::= { pwTemplateEntry 25 }
pwTemplateIgmpImportPlcy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpImportPlcy specifies a policy statement
that must be applied to all incoming IGMP messages on the SDP Bind."
DEFVAL { "" }
::= { pwTemplateEntry 26 }
pwTemplateIgmpLastMembIntvl OBJECT-TYPE
SYNTAX Unsigned32 (1..50)
UNITS "deciseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpLastMembIntvl specifies the Max Response
Time (in deciseconds) used in Group-Specific and Group-Source-Specific
Queries sent in response to 'leave' messages. This is also the amount
of time between Group-Specific Query messages.
This value may be tuned to modify the leave latency of the network. A
reduced value results in reduced time to detect the loss of the last
member of a group."
DEFVAL { 10 }
::= { pwTemplateEntry 27 }
pwTemplateIgmpMaxNbrGrps OBJECT-TYPE
SYNTAX Unsigned32 (0..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpMaxNbrGrps specifies how many group
addresses are allowed for the SDP Bind. The value 0 means that no
limit is imposed."
DEFVAL { 0 }
::= { pwTemplateEntry 28 }
pwTemplateIgmpGenQueryIntvl OBJECT-TYPE
SYNTAX Unsigned32 (2..1024)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpGenQueryIntvl specifies the interval (in
seconds) between two consecutive general queries sent by the system on
the SDP.
The value of this object is only meaningful when the value of
pwTemplateIgmpSendQueries is 'enabled'."
DEFVAL { 125 }
::= { pwTemplateEntry 29 }
pwTemplateIgmpQueryRespIntvl OBJECT-TYPE
SYNTAX Unsigned32 (1..1023)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpQueryRespIntvl specifies the maximum
response time (in seconds) advertised in IGMPv2/v3 queries.
The value of this object is only meaningful when the value of
pwTemplateIgmpSendQueries is 'enabled'."
DEFVAL { 10 }
::= { pwTemplateEntry 30 }
pwTemplateIgmpRobustCount OBJECT-TYPE
SYNTAX Unsigned32 (2..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpRobustCount specifies the value of the
Robust count.
This object allows tuning for the expected packet loss on the SDP. If
an SDP is expected to be lossy, the Robustness Variable may be
increased. IGMP snooping is robust to (Robustness Variable-1) packet
losses.
The value of this object is only meaningful when the value of
pwTemplateIgmpSendQueries is 'enabled'."
DEFVAL { 2 }
::= { pwTemplateEntry 31 }
pwTemplateIgmpSendQueries OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpSendQueries specifies whether the system
generates General Queries by itself on the SDP."
DEFVAL { disabled }
::= { pwTemplateEntry 32 }
pwTemplateIgmpMcacPolicyName OBJECT-TYPE
SYNTAX TPolicyStatementNameOrEmpty
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of pwTemplateIgmpMcacPolicyName indicates the name of the
multicast CAC policy."
DEFVAL { "" }
::= { pwTemplateEntry 33 }
pwTemplateIgmpMcacUnconstBW OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..2147483647)
UNITS "kilobps"
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of pwTemplateIgmpMcacUnconstBW specifies the bandwidth
assigned for interface's multicast CAC policy traffic in kilobits per
second(kbps).
If the default value of '-1' is set, there is no constraint on
bandwidth allocated at the interface.
If the value of pwTemplateIgmpMcacUnconstBW is set to '0' and if a
multicast CAC policy is assigned on the interface, then no group
(channel) from that policy is allowed on that interface."
DEFVAL { -1 }
::= { pwTemplateEntry 34 }
pwTemplateIgmpMcacPrRsvMndBW OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
UNITS "kilobps"
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of pwTemplateIgmpMcacPrRsvMndBW specifies the bandwidth
pre-reserved for all the mandatory channels on a given interface in
kilobits per second(kbps).
If the value of pwTemplateIgmpMcacUnconstBW is '0', no mandatory
channels are allowed. If the value of pwTemplateIgmpMcacUnconstBW is
'-1', then all mandatory and optional channels are allowed.
If the value of pwTemplateIgmpMcacPrRsvMndBW is equal to the value of
pwTemplateIgmpMcacUnconstBW, then all the unconstrained bandwidth on a
given interface is allocated to mandatory channels configured through
multicast CAC policy on that interface and no optional groups
(channels) are allowed.
The value of pwTemplateIgmpMcacPrRsvMndBW should always be less than
or equal to that of pwTemplateIgmpMcacUnconstBW. An attempt to set the
value of pwTemplateIgmpMcacPrRsvMndBW greater than that of
pwTemplateIgmpMcacUnconstBW will result in 'inconsistentValue' error."
DEFVAL { -1 }
::= { pwTemplateEntry 35 }
pwTemplateIgmpVersion OBJECT-TYPE
SYNTAX TmnxIgmpVersion
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpVersion specifies the version of IGMP for
the PW template."
DEFVAL { version3 }
::= { pwTemplateEntry 36 }
pwTemplateForceVlanVcForwarding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateForceVlanVcForwarding specifies whether
or not vc-vlan-type forwarding is forced in the datapath when
pwTemplateVcType is set to 'ether'. When
pwTemplateForceVlanVcForwarding is set to 'true', vc-vlan-type
forwarding is forced.
An 'inconsistentValue' error is returned when an attempt is made to
set the value of pwTemplateForceVlanVcForwarding to 'true' and
pwTemplateVcType is not set to 'ether'."
DEFVAL { false }
::= { pwTemplateEntry 37 }
pwTemplateHashLabel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateHashLabel specifies whether the use of hash
label is enabled or not for the PW template."
DEFVAL { false }
::= { pwTemplateEntry 38 }
pwTemplateControlWord OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateControlWord specifies whether the use of
'ControlWord' is enabled on pseudowire packets or not.
When the value of the object is set to 'true', all VPLS packets are
encapsulated with the control word when sent over the pseudowire. When
the value of the object is set to 'false', the use of 'ControlWord' is
disabled."
DEFVAL { false }
::= { pwTemplateEntry 39 }
pwTemplateHashLabelSignalCap OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateHashLabelSignalCap specifies whether to signal
the hash label capability to the remote PE.
The default value is 'false' and cannot be changed unless
pwTemplateHashLabel is set to 'true'."
DEFVAL { false }
::= { pwTemplateEntry 40 }
pwTemplateRestProtSrcMac OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object pwTemplateRestProtSrcMac specifies how the
agent will handle relearn requests for protected MAC addresses. When
the value of this object is 'true' requests to relearn a protected MAC
address will be ignored.
In addition, if the value of pwTemplateRestProtSrcMacAction is
'disable', then the SAP or SDP-BIND where the protected source MAC was
seen will be brought operationally down."
DEFVAL { false }
::= { pwTemplateEntry 52 }
pwTemplateRestProtSrcMacAction OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
alarmOnly (2),
discardFrame (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object pwTemplateRestProtSrcMacAction indicates the
action to take whenever a relearn request for a protected MAC is
received on a restricted SAP.
When the value of this object is 'disable' the SAP will be placed in
the operational down state, with the operating flag 'recProtSrcMac'
set.
When the value of this object is 'alarmOnly', the SAP or SDP-BIND
which sets the restricted MAC will be left up and only a notification,
sapReceivedProtSrcMac or sdpBindReceivedProtSrcMac, will be generated.
When the value of this object is 'discardFrame', the SAP or SDP-BIND
which sees the restricted MAC will start discarding the frame in
addition to generating sapReceivedProtSrcMac or
sdpBindReceivedProtSrcMac notification."
DEFVAL { disable }
::= { pwTemplateEntry 53 }
pwTemplateAutoLearnMacProtect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateAutoLearnMacProtect specifies whether to enable
automatic population of the MAC protect list with source MAC addresses
learned on the SAP belonging to this template."
DEFVAL { false }
::= { pwTemplateEntry 54 }
pwTemplateShgRestProtSrcMacAct OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
alarmOnly (2),
discardFrame (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object pwTemplateShgRestProtSrcMacAct indicates the
action to take whenever a relearn request for a protected MAC is
received on a restricted SAP or SDP-BIND belonging to
pwTemplateShgName.
When the value of this object is 'disable' the SAP or SDP-BIND
belonging to pwTemplateShgName will be placed in the operational down
state, with the operating flag 'recProtSrcMac' set.
When the value of this object is 'alarmOnly', the SAP belonging to
pwTemplateShgName will be left up and only a notification,
sapReceivedProtSrcMac or sdpBindReceivedProtSrcMac, will be generated.
When the value of this object is 'discardFrame', the SAP or SDP-BIND
belonging to pwTemplateShgName will start discarding the frame in
addition to generating sapReceivedProtSrcMac or
sdpBindReceivedProtSrcMac notification."
DEFVAL { disable }
::= { pwTemplateEntry 55 }
pwTemplateShgAutoLearnMacProtect OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateShgAutoLearnMacProtect specifies whether to
enable automatic population of the MAC protect list with source MAC
addresses learned on the SAP or SDP-BIND belonging to
pwTemplateShgName."
DEFVAL { false }
::= { pwTemplateEntry 56 }
pwTemplateIngQoSNetworkPlcyId OBJECT-TYPE
SYNTAX TSdpIngressPolicyID (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the pwTemplateIngQoSNetworkPlcyId specifies the ingress
QoS network policy applied to this PW template."
DEFVAL { 0 }
::= { pwTemplateEntry 57 }
pwTemplateEgrQoSNetworkPlcyId OBJECT-TYPE
SYNTAX TSdpEgressPolicyID (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the pwTemplateEgrQoSNetworkPlcyId specifies the egress
QoS network policy applied to this PW template."
DEFVAL { 0 }
::= { pwTemplateEntry 58 }
pwTemplateIngQoSFpRedirectQGrp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIngQoSFpRedirectQGrp specifies the
forwarding-plane queue group Policy for this PW template.
This object must be set along with pwTemplateIngQoSNetworkPlcyId or
pwTemplateIngQoSNetworkPlcyName object.
An 'inconsistentValue' error is returned if
pwTemplateIngQoSFpRedirectQGrp is set to a non-default value and an
entry corresponding to tmnxFPNum to which this PW template belongs
does not exist in tmnxFPAccIngQGrpTable."
DEFVAL { "" }
::= { pwTemplateEntry 59 }
pwTemplateEgrQoSPortRedirectQGrp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateEgrQoSPortRedirectQGrp specifies the
forwarding-plane queue group Policy for this PW template.
This object must be set along with pwTemplateEgrQoSNetworkPlcyId or
pwTemplateEgrQoSNetworkPlcyName object.
An 'inconsistentValue' error is returned if
pwTemplateEgrQoSPortRedirectQGrp is set to a non-default value and an
entry corresponding to tmnxFPNum to which this PW template belongs
does not exist in tmnxFPAccIngQGrpTable."
DEFVAL { "" }
::= { pwTemplateEntry 60 }
pwTemplateIngQoSInstanceId OBJECT-TYPE
SYNTAX TQosQGrpInstanceIDorZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIngQoSInstanceId specifies the instance of the
forwarding-plane ingress Queue Group for this PW template."
DEFVAL { 0 }
::= { pwTemplateEntry 61 }
pwTemplateEgrQoSInstanceId OBJECT-TYPE
SYNTAX TQosQGrpInstanceIDorZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateEgrQoSInstanceId specifies the instance of the
forwarding-plane egress Queue Group for this PW template."
DEFVAL { 0 }
::= { pwTemplateEntry 62 }
pwTemplateBlockOnPeerFault OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateBlockOnPeerFault specifies whether to block
user traffic being forwarded when peer pw status bits have faults for
this PW template."
DEFVAL { false }
::= { pwTemplateEntry 63 }
pwTemplateForceQinqVcForwarding OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of pwTemplateForceQinqVcForwarding specifies whether or not
the datapath should forcefully insert two VLAN tags when
pwTemplateVcType is either set to 'ether' or 'vlan'.
An 'inconsistentValue' error is returned when an attempt is made to
set the value of pwTemplateForceQinqVcForwarding to 'true' and
pwTemplateVcType is not set to either 'ether' or 'vlan'."
DEFVAL { false }
::= { pwTemplateEntry 64 }
pwTemplatePreferProvSdp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplatePreferProvSdp specifies whether or not
to use provisioned SDP when available.
An 'inconsistentValue' error is returned if pwTemplatePreferProvSdp
is set to true when pwTemplateUseProvisionedSdp is set to false.
An 'inconsistentValue' error is returned if pwTemplatePreferProvSdp
is modified after creation of the entry."
DEFVAL { false }
::= { pwTemplateEntry 65 }
pwTemplateEntropyLabel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateEntropyLabel specifies whether the use of
entropy label is enabled or not for the PW template."
DEFVAL { false }
::= { pwTemplateEntry 66 }
pwTemplateName OBJECT-TYPE
SYNTAX TLNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateName specifies the name to associate with this
PW template."
DEFVAL { ''H }
::= { pwTemplateEntry 67 }
pwTemplateGreDelivery OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateGreDelivery specifies whether or not to use a
GRE tunnel should be used when creating an auto SDP. An
'inconsistentValue' error is returned if pwTemplateGreDelivery is
modified after creation of the entry."
DEFVAL { false }
::= { pwTemplateEntry 68 }
pwTemplateIngQoSNetworkPlcyName OBJECT-TYPE
SYNTAX TLNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the pwTemplateIngQoSNetworkPlcyName specifies the ingress
QoS network policy name applied to this PW template."
DEFVAL { "" }
::= { pwTemplateEntry 69 }
pwTemplateEgrQoSNetworkPlcyName OBJECT-TYPE
SYNTAX TLNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the pwTemplateEgrQoSNetworkPlcyName specifies the egress
QoS network policy name applied to this PW template."
DEFVAL { "" }
::= { pwTemplateEntry 70 }
pwTemplateIngressIpFilterName OBJECT-TYPE
SYNTAX TLNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIngressIpFilterName specifies the ingress
Filter name.
When the value of this object is set to non-default, the value of
object pwTemplateIngressIpFilterId is ignored."
DEFVAL { "" }
::= { pwTemplateEntry 71 }
pwTemplateIngressIpv6FilterName OBJECT-TYPE
SYNTAX TLNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIngressIpv6FilterName specifies the ingress
Filter name.
When the value of this object is set to non-default, the value of
object pwTemplateIngressIpv6FilterId is ignored."
DEFVAL { "" }
::= { pwTemplateEntry 72 }
pwTemplateIngressMacFilterName OBJECT-TYPE
SYNTAX TLNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIngressMacFilterName specifies the ingress
Filter name.
When the value of this object is set to non-default, the value of
object pwTemplateIngressMacFilterId is ignored."
DEFVAL { "" }
::= { pwTemplateEntry 73 }
pwTemplateEgressIpFilterName OBJECT-TYPE
SYNTAX TLNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateEgressIpFilterName specifies the ingress Filter
name.
When the value of this object is set to non-default, the value of
object pwTemplateEgressIpFilterId is ignored."
DEFVAL { "" }
::= { pwTemplateEntry 74 }
pwTemplateEgressIpv6FilterName OBJECT-TYPE
SYNTAX TLNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateEgressIpv6FilterName specifies the ingress
Filter name.
When the value of this object is set to non-default, the value of
object pwTemplateEgressIpv6FilterId is ignored."
DEFVAL { "" }
::= { pwTemplateEntry 75 }
pwTemplateEgressMacFilterName OBJECT-TYPE
SYNTAX TLNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateEgressMacFilterName specifies the ingress
Filter name.
When the value of this object is set to non-default, the value of
object pwTemplateEgressMacFilterId is ignored."
DEFVAL { "" }
::= { pwTemplateEntry 76 }
pwTemplateForceQinqVcFwding OBJECT-TYPE
SYNTAX INTEGER {
none (0),
ctagctag (1),
stagctag (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateForceQinqVcFwding specifies whether or not the
datapath should forcefully insert two VLAN tags which are copied from
the qinq service-delimiting vlan values.
The pwTemplateVcType should be either set to 'ether' or 'vlan'."
DEFVAL { none }
::= { pwTemplateEntry 77 }
pwTemplateIgmpSnpgGrpSrcTblLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpSnpgGrpSrcTblLC indicates the sysUpTime at
the time of the last modification of pwTemplateIgmpSnpgGrpSrcTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 19 }
pwTemplateIgmpSnpgGrpSrcTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwTemplateIgmpSnpgGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains entries for static IGMP Snooping groups."
::= { tmnxSdpObjs 20 }
pwTemplateIgmpSnpgGrpSrcEntry OBJECT-TYPE
SYNTAX PwTemplateIgmpSnpgGrpSrcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific static IGMP Snooping groups."
INDEX {
pwTemplateId,
pwTemplateIgmpSnpgGrpAddrType,
pwTemplateIgmpSnpgGrpAddr,
pwTemplateIgmpSnpgSrcAddrType,
pwTemplateIgmpSnpgSrcAddr
}
::= { pwTemplateIgmpSnpgGrpSrcTable 1 }
PwTemplateIgmpSnpgGrpSrcEntry ::= SEQUENCE
{
pwTemplateIgmpSnpgGrpAddrType InetAddressType,
pwTemplateIgmpSnpgGrpAddr InetAddress,
pwTemplateIgmpSnpgSrcAddrType InetAddressType,
pwTemplateIgmpSnpgSrcAddr InetAddress,
pwTemplateIgmpSnpgRowStatus RowStatus,
pwTemplateIgmpSnpgLastChngd TimeStamp
}
pwTemplateIgmpSnpgGrpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address type for this entry."
::= { pwTemplateIgmpSnpgGrpSrcEntry 1 }
pwTemplateIgmpSnpgGrpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP multicast group address for this entry."
::= { pwTemplateIgmpSnpgGrpSrcEntry 2 }
pwTemplateIgmpSnpgSrcAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source address type for this entry."
::= { pwTemplateIgmpSnpgGrpSrcEntry 3 }
pwTemplateIgmpSnpgSrcAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source address for this entry."
::= { pwTemplateIgmpSnpgGrpSrcEntry 4 }
pwTemplateIgmpSnpgRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpSnpgRowStatus is used for the creation and
deletion of static IGMP snooping entries."
::= { pwTemplateIgmpSnpgGrpSrcEntry 5 }
pwTemplateIgmpSnpgLastChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of pwTemplateIgmpSnpgLastChngd indicates the sysUpTime at
the time of the last modification of this entry.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { pwTemplateIgmpSnpgGrpSrcEntry 6 }
pwTemplateMfibAllowedMdaTblLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of pwTemplateMfibAllowedMdaTblLC indicates the sysUpTime at
the time of the last modification of pwTemplateMfibAllowedMdaTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 21 }
pwTemplateMfibAllowedMdaTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwTemplateMfibAllowedMdaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pwTemplateMfibAllowedMdaTable has an entry for each MFIB allowed
MDA destination for an PW template."
::= { tmnxSdpObjs 22 }
pwTemplateMfibAllowedMdaEntry OBJECT-TYPE
SYNTAX PwTemplateMfibAllowedMdaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry represents an MFIB allowed MDA destination for an PW
template configured in the system. Entries can be created and deleted
via SNMP SET operations on the object pwTemplateMfibMdaRowStatus."
INDEX {
pwTemplateId,
tmnxChassisIndex,
tmnxCardSlotNum,
tmnxMDASlotNum
}
::= { pwTemplateMfibAllowedMdaTable 1 }
PwTemplateMfibAllowedMdaEntry ::= SEQUENCE
{ pwTemplateMfibMdaRowStatus RowStatus }
pwTemplateMfibMdaRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTemplateMfibMdaRowStatus controls the creation and
deletion of rows in this table."
::= { pwTemplateMfibAllowedMdaEntry 1 }
sdpBindTlsMrpTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTableLastChanged indicates the sysUpTime at
the time of the last modification of sdpBindTlsMrpTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 23 }
sdpBindTlsMrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsMrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpBindTlsMrpTable allows the operator to modify attributes of the
Multiple Registration Protocol (MRP) feature for the TLS SDP Bind.
This table contains an entry for each TLS SDP Bind created by the user
using either sdpBindTlsTable or sdpBindMeshTlsTable.
Rows in this table are created and deleted automatically by the
system."
::= { tmnxSdpObjs 24 }
sdpBindTlsMrpEntry OBJECT-TYPE
SYNTAX SdpBindTlsMrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry contains objects that allows the modification of the
Multiple Registration Protocol feature for a specific SDP-Binding in a
TLS service."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindTlsMrpTable 1 }
SdpBindTlsMrpEntry ::= SEQUENCE
{
sdpBindTlsMrpLastChngd TimeStamp,
sdpBindTlsMrpJoinTime Unsigned32,
sdpBindTlsMrpLeaveTime Unsigned32,
sdpBindTlsMrpLeaveAllTime Unsigned32,
sdpBindTlsMrpPeriodicTime Unsigned32,
sdpBindTlsMrpPeriodicEnabled TruthValue,
sdpBindTlsMrpRxPdus Counter32,
sdpBindTlsMrpDroppedPdus Counter32,
sdpBindTlsMrpTxPdus Counter32,
sdpBindTlsMrpRxNewEvent Counter32,
sdpBindTlsMrpRxJoinInEvent Counter32,
sdpBindTlsMrpRxInEvent Counter32,
sdpBindTlsMrpRxJoinEmptyEvent Counter32,
sdpBindTlsMrpRxEmptyEvent Counter32,
sdpBindTlsMrpRxLeaveEvent Counter32,
sdpBindTlsMrpTxNewEvent Counter32,
sdpBindTlsMrpTxJoinInEvent Counter32,
sdpBindTlsMrpTxInEvent Counter32,
sdpBindTlsMrpTxJoinEmptyEvent Counter32,
sdpBindTlsMrpTxEmptyEvent Counter32,
sdpBindTlsMrpTxLeaveEvent Counter32,
sdpBindTlsMrpPolicy TNamedItemOrEmpty
}
sdpBindTlsMrpLastChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpLastChngd indicates the sysUpTime at the
time of the last modification of this entry.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { sdpBindTlsMrpEntry 1 }
sdpBindTlsMrpJoinTime OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
UNITS "deciseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpJoinTime specifies a timer value in 10ths of
seconds which determines the maximum rate at which attribute join
messages can be sent on the SDP."
DEFVAL { 2 }
::= { sdpBindTlsMrpEntry 2 }
sdpBindTlsMrpLeaveTime OBJECT-TYPE
SYNTAX Unsigned32 (30..60)
UNITS "deciseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpLeaveTime specifies a timer value in 10ths
of seconds which determines the amount of time a registered attribute
is held in leave state before the registration is removed."
DEFVAL { 30 }
::= { sdpBindTlsMrpEntry 3 }
sdpBindTlsMrpLeaveAllTime OBJECT-TYPE
SYNTAX Unsigned32 (60..300)
UNITS "deciseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpLeaveAllTime specifies a timer value in
10ths of seconds which determines the frequency where all attribute
declarations on the SDP are all refreshed."
DEFVAL { 100 }
::= { sdpBindTlsMrpEntry 4 }
sdpBindTlsMrpPeriodicTime OBJECT-TYPE
SYNTAX Unsigned32 (10..100)
UNITS "deciseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpPeriodicTime specifies a timer value in
10ths of seconds which determines the frequency of retransmission of
attribute declarations."
DEFVAL { 10 }
::= { sdpBindTlsMrpEntry 5 }
sdpBindTlsMrpPeriodicEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpPeriodicEnabled specifies whether
retransmission of attribute declarations is enabled."
DEFVAL { false }
::= { sdpBindTlsMrpEntry 6 }
sdpBindTlsMrpRxPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxPdus indicates the number of MRP packets
received on this SDP Bind."
::= { sdpBindTlsMrpEntry 7 }
sdpBindTlsMrpDroppedPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpDroppedPdus indicates the number of dropped
MRP packets on this SDP Bind."
::= { sdpBindTlsMrpEntry 8 }
sdpBindTlsMrpTxPdus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxPdus indicates the number of MRP packets
transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 9 }
sdpBindTlsMrpRxNewEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxNewEvent indicates the number of 'New' MRP
events received on this SDP Bind."
::= { sdpBindTlsMrpEntry 10 }
sdpBindTlsMrpRxJoinInEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxJoinInEvent indicates the number of
'Join-In' MRP events received on this SDP Bind."
::= { sdpBindTlsMrpEntry 11 }
sdpBindTlsMrpRxInEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxInEvent indicates the number of 'In' MRP
events received on this SDP Bind."
::= { sdpBindTlsMrpEntry 12 }
sdpBindTlsMrpRxJoinEmptyEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxJoinEmptyEvent indicates the number of
'Join Empty' MRP events received on this SDP Bind."
::= { sdpBindTlsMrpEntry 13 }
sdpBindTlsMrpRxEmptyEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxEmptyEvent indicates the number of 'Empty'
MRP events received on this SDP Bind."
::= { sdpBindTlsMrpEntry 14 }
sdpBindTlsMrpRxLeaveEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpRxLeaveEvent indicates the number of 'Leave'
MRP events received on this SDP Bind."
::= { sdpBindTlsMrpEntry 15 }
sdpBindTlsMrpTxNewEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxNewEvent indicates the number of 'New' MRP
events transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 16 }
sdpBindTlsMrpTxJoinInEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxJoinInEvent indicates the number of
'Join-In' MRP events transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 17 }
sdpBindTlsMrpTxInEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxInEvent indicates the number of 'In' MRP
events transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 18 }
sdpBindTlsMrpTxJoinEmptyEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxJoinEmptyEvent indicates the number of
'Join Empty' MRP events transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 19 }
sdpBindTlsMrpTxEmptyEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxEmptyEvent indicates the number of 'Empty'
MRP events transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 20 }
sdpBindTlsMrpTxLeaveEvent OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpTxLeaveEvent indicates the number of 'Leave'
MRP events transmitted on this SDP Bind."
::= { sdpBindTlsMrpEntry 21 }
sdpBindTlsMrpPolicy OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindTlsMrpPolicy specifies the mrp policy to control
which Group BMAC attributes will advertise on the egress SDP Bind."
DEFVAL { "" }
::= { sdpBindTlsMrpEntry 22 }
sdpBindTlsMmrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsMmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains an entry for each MAC address managed
by Multiple MAC Registration Protocol (MMRP) on the SDP
Bind for the TLS. Entries are dynamically created and
destroyed by the system as the MAC Addresses are registered
or declared in MMRP."
::= { tmnxSdpObjs 25 }
sdpBindTlsMmrpEntry OBJECT-TYPE
SYNTAX SdpBindTlsMmrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MMRP specific information about a MAC address managed by MMRP on a SDP
Bind in a TLS."
INDEX {
svcId,
sdpBindId,
sdpBindTlsMmrpMacAddr
}
::= { sdpBindTlsMmrpTable 1 }
SdpBindTlsMmrpEntry ::= SEQUENCE
{
sdpBindTlsMmrpMacAddr MacAddress,
sdpBindTlsMmrpDeclared TruthValue,
sdpBindTlsMmrpRegistered TruthValue,
sdpBindTlsMmrpEndStation TruthValue
}
sdpBindTlsMmrpMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of sdpBindTlsMmrpMacAddr indicates an ethernet MAC address
which is being managed by MMRP on this SAP."
::= { sdpBindTlsMmrpEntry 1 }
sdpBindTlsMmrpDeclared OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMmrpDeclared indicates whether the MRP
applicant on this SAP is declaring this MAC address on behalf of MMRP."
::= { sdpBindTlsMmrpEntry 2 }
sdpBindTlsMmrpRegistered OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMmrpRegistered indicates whether the MRP
registrant on this SAP has notified MMRP of a registration of this MAC
address."
::= { sdpBindTlsMmrpEntry 3 }
sdpBindTlsMmrpEndStation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsMmrpEndStation indicates whether the MRP
registrant on this SAP originated per end-station."
::= { sdpBindTlsMmrpEntry 4 }
sdpAutoBindBgpInfoTableLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAutoBindBgpInfoTableLC indicates the sysUpTime at the
time of the last modification of sdpAutoBindBgpInfoTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 26 }
sdpAutoBindBgpInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpAutoBindBgpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpAutoBindBgpInfoTable has an entry for each SDP Bind entry from
sdpBindTable which was created as a result of BGP Auto-discovery."
::= { tmnxSdpObjs 27 }
sdpAutoBindBgpInfoEntry OBJECT-TYPE
SYNTAX SdpAutoBindBgpInfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry contains BGP-related information for an SDP Bind entry
created as a result of BGP Auto-discovery."
INDEX {
svcId,
sdpBindId
}
::= { sdpAutoBindBgpInfoTable 1 }
SdpAutoBindBgpInfoEntry ::= SEQUENCE
{
sdpAutoBindBgpInfoTemplateId PWTemplateId,
sdpAutoBindBgpInfoAGI TmnxVPNRouteDistinguisher,
sdpAutoBindBgpInfoSAII Unsigned32,
sdpAutoBindBgpInfoTAII Unsigned32
}
sdpAutoBindBgpInfoTemplateId OBJECT-TYPE
SYNTAX PWTemplateId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAutoBindBgpInfoTemplateId indicates the the value of
the pwTemplateId object for the PW template entry used to create this
SDP Bind."
::= { sdpAutoBindBgpInfoEntry 1 }
sdpAutoBindBgpInfoAGI OBJECT-TYPE
SYNTAX TmnxVPNRouteDistinguisher
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAutoBindBgpInfoAGI indicates the Attachment Group
Identifier (AGI) portion of the Generalized Id FEC element from the
pseudowire setup for this SDP Bind."
::= { sdpAutoBindBgpInfoEntry 2 }
sdpAutoBindBgpInfoSAII OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAutoBindBgpInfoSAII indicates the Source Attachment
Individual Identifier (SAII) portion of the Generalized Id FEC element
from the pseudowire setup for this SDP Bind."
::= { sdpAutoBindBgpInfoEntry 3 }
sdpAutoBindBgpInfoTAII OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAutoBindBgpInfoTAII indicates the Target Attachment
Individual Identifier (TAII) portion of the Generalized Id FEC element
from the pseudowire setup for this SDP Bind."
::= { sdpAutoBindBgpInfoEntry 4 }
svcApplyEvalPwTemplate OBJECT IDENTIFIER ::= { tmnxSdpObjs 28 }
svcApplyEvalPwTemplateSvcId OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object svcApplyEvalPwTemplateSvcId specifies the
service identifier to which this action applies."
DEFVAL { 0 }
::= { svcApplyEvalPwTemplate 1 }
svcApplyEvalPwTemplateId OBJECT-TYPE
SYNTAX PWTemplateId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object svcApplyEvalPwTemplateId specifies the
pwTemplateId to apply on the service 'svcApplyEvalPwTemplateSvcId'."
DEFVAL { 0 }
::= { svcApplyEvalPwTemplate 2 }
svcApplyEvalPwTemplateAction OBJECT-TYPE
SYNTAX TmnxActionType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of svcApplyEvalPwTemplateAction when set to 'doAction'
triggers the action to re-evaluate pseudo-wire template policy
'svcApplyEvalPwTemplateId' on the 'svcApplyEvalPwTemplateSvcId'
service.
Reading this object returns the value 'notApplicable'."
DEFVAL { notApplicable }
::= { svcApplyEvalPwTemplate 3 }
svcApplyEvalPwTemplateSuccess OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object svcApplyEvalPwTemplateSuccess indicates
whether the action was successful.
If the value of the object equals 'false', then the value of
svcApplyEvalPwTemplateErrorMsg indicates the reason of the failure."
DEFVAL { false }
::= { svcApplyEvalPwTemplate 4 }
svcApplyEvalPwTemplateErrorMsg OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object svcApplyEvalPwTemplateErrorMsg indicates the
reason of failure, in case the value of the object
svcApplyEvalPwTemplateSuccess is equal to 'false'.
If the value of the object svcApplyEvalPwTemplateSuccess is equal to
'true', this object contains an empty string."
::= { svcApplyEvalPwTemplate 5 }
svcApplyEvalPwTemplateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the object svcApplyEvalPwTemplateTime indicates the value
of sysUpTime at the last time that the object
svcApplyEvalPwTemplateSuccess was written by the system."
::= { svcApplyEvalPwTemplate 6 }
sdpBindPbbTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindPbbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains Provider Backbone Bridging (PBB/IEEE 802.1ah)
spoke SDP Bind information."
::= { tmnxSdpObjs 29 }
sdpBindPbbEntry OBJECT-TYPE
SYNTAX SdpBindPbbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"PBB I-Component instance-specific information about an SDP Bind in the
B-Component instance.
Entries in this table can be created or deleted via SNMP operations."
INDEX {
sdpBindPbbSvcIdIVpls,
sdpBindPbbSvcIdBVpls,
sdpBindPbbId
}
::= { sdpBindPbbTable 1 }
SdpBindPbbEntry ::= SEQUENCE
{
sdpBindPbbSvcIdIVpls TmnxServId,
sdpBindPbbSvcIdBVpls TmnxServId,
sdpBindPbbId SdpBindId,
sdpBindPbbRowStatus RowStatus,
sdpBindPbbLastMgmtChange TimeStamp,
sdpBindPbbIgmpSnpgMRouter TruthValue,
sdpBindPbbMldSnpgMRouter TruthValue
}
sdpBindPbbSvcIdIVpls OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object sdpBindPbbSvcIdIVpls specifies the Service
identifier of the I-Component instance."
::= { sdpBindPbbEntry 1 }
sdpBindPbbSvcIdBVpls OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object sdpBindPbbSvcIdBVpls specifies the Service
identifier of the B-Component instance."
::= { sdpBindPbbEntry 2 }
sdpBindPbbId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object sdpBindPbbId specifies the identifier of the
SDP Binding in the B-Component instance."
::= { sdpBindPbbEntry 3 }
sdpBindPbbRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindPbbRowStatus specifies the row status of this row.
The only values supported during a set operation are 'createAndGo' and
'destroy'."
::= { sdpBindPbbEntry 4 }
sdpBindPbbLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindPbbLastMgmtChange indicates the sysUpTime at the
time of the most recent management-initiated change to this table row."
::= { sdpBindPbbEntry 5 }
sdpBindPbbIgmpSnpgMRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindPbbIgmpSnpgMRouter specifies if a
multicast router is attached behind this SDP Bind."
DEFVAL { false }
::= { sdpBindPbbEntry 6 }
sdpBindPbbMldSnpgMRouter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindPbbMldSnpgMRouter specifies if a
multicast router is attached behind this SDP Bind."
DEFVAL { false }
::= { sdpBindPbbEntry 7 }
sdpBindFPropBMacAddrTblLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindFPropBMacAddrTblLastChgd indicates the sysUpTime
at the last modification of sdpBindFPropBMacAddrTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, this object contains a zero
value."
::= { tmnxSdpObjs 30 }
sdpBindFPropBMacAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindFPropBMacAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"sdpBindFPropBMacAddrTable contains the optional configured backbone MAC
(BMac) addresses (or MAC names) for each SDP binding. This table
extends the information in sdpBindTable."
::= { tmnxSdpObjs 31 }
sdpBindFPropBMacAddrEntry OBJECT-TYPE
SYNTAX SdpBindFPropBMacAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"sdpBindFPropBMacAddrEntry defines a row in the
sdpBindFPropBMacAddrTable. Rows are created and destroyed using
sdpBindFPropBMacAddrRowStatus. A prerequisite for row creation: a
row with the same svcId and sdpBindId must be present in the
sdpBindTable."
INDEX {
svcId,
sdpBindId,
sdpBindFPropBMacAddrOrMacNameTag,
sdpBindFPropBMacAddrOrMacName
}
::= { sdpBindFPropBMacAddrTable 1 }
SdpBindFPropBMacAddrEntry ::= SEQUENCE
{
sdpBindFPropBMacAddrOrMacNameTag INTEGER,
sdpBindFPropBMacAddrOrMacName TNamedItem,
sdpBindFPropBMacAddrRowStatus RowStatus
}
sdpBindFPropBMacAddrOrMacNameTag OBJECT-TYPE
SYNTAX INTEGER {
macName (1),
macAddr (2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of sdpBindFPropBMacAddrOrMacNameTag specifies whether
sdpBindFPropBMacAddrOrMacName contains a MAC name, or a MAC address."
::= { sdpBindFPropBMacAddrEntry 1 }
sdpBindFPropBMacAddrOrMacName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of sdpBindFPropBMacAddrOrMacName specifies a MAC name or MAC
address configured against a <svcId, sdpBindId> index pair.
When sdpBindFPropBMacAddrOrMacNameTag is 'macName (1)',
sdpBindFPropBMacAddrOrMacName must contain a MAC name which is present
in the svcMacName column of the svcMacNameTable.
When sdpBindFPropBMacAddrOrMacNameTag is 'macAddr (2)',
sdpBindFPropBMacAddrOrMacName must contain a MAC address, encoded in
network byte order and IEEE 802.3 canonical bit order as defined in
IEEE Std 802-2001.
All the MAC addresses configured for a particular SDP (whether
configured as MAC addresses, or via MAC names) must refer to one
B-VPLS on the remote system."
::= { sdpBindFPropBMacAddrEntry 2 }
sdpBindFPropBMacAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindFPropBMacAddrRowStatus specifies the status of
this row."
::= { sdpBindFPropBMacAddrEntry 3 }
sdpAutoBindBgpVplsTableLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAutoBindBgpVplsTableLC indicates the sysUpTime at the
time of the last modification of sdpAutoBindBgpVplsTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 32 }
sdpAutoBindBgpVplsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpAutoBindBgpVplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpAutoBindBgpVplsTable has an entry for each SDP Bind entry from
sdpBindTable which was created as a result of BGP VPLS binding."
::= { tmnxSdpObjs 33 }
sdpAutoBindBgpVplsEntry OBJECT-TYPE
SYNTAX SdpAutoBindBgpVplsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry contains BGP-related information for an SDP Bind entry
created as a result of BGP VPLS binding."
INDEX {
svcId,
sdpBindId
}
::= { sdpAutoBindBgpVplsTable 1 }
SdpAutoBindBgpVplsEntry ::= SEQUENCE
{ sdpAutoBindBgpVplsTemplateId PWTemplateId }
sdpAutoBindBgpVplsTemplateId OBJECT-TYPE
SYNTAX PWTemplateId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAutoBindBgpVplsTemplateId indicates the the value of
the pwTemplateId object for the PW template entry used to create this
SDP Bind."
::= { sdpAutoBindBgpVplsEntry 1 }
sdpAtBndBgp129Type2TableLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAtBndBgp129Type2TableLC indicates the sysUpTime at the
time of the last modification of sdpAtBndBgp129Type2Table.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 34 }
sdpAtBndBgp129Type2Table OBJECT-TYPE
SYNTAX SEQUENCE OF SdpAtBndBgp129Type2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpAtBndBgp129Type2Table has an entry for each SDP Bind entry from
sdpBindTable which was created as a result of BGP Auto-discovery with
a FEC-129 Type 2."
::= { tmnxSdpObjs 35 }
sdpAtBndBgp129Type2Entry OBJECT-TYPE
SYNTAX SdpAtBndBgp129Type2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry contains BGP-related information for an SDP Bind entry
created as a result of BGP Auto-discovery with a FEC-129 Type 2."
INDEX {
svcId,
sdpBindId
}
::= { sdpAtBndBgp129Type2Table 1 }
SdpAtBndBgp129Type2Entry ::= SEQUENCE
{
sdpAtBndBgp129Type2TemplateId PWTemplateId,
sdpAtBndBgp129Type2SaiiGlobalId TmnxPwGlobalId,
sdpAtBndBgp129Type2SaiiPrefix Unsigned32,
sdpAtBndBgp129Type2SaiiAcId Unsigned32,
sdpAtBndBgp129Type2TaiiGlobalId TmnxPwGlobalId,
sdpAtBndBgp129Type2TaiiPrefix Unsigned32,
sdpAtBndBgp129Type2TaiiAcId Unsigned32
}
sdpAtBndBgp129Type2TemplateId OBJECT-TYPE
SYNTAX PWTemplateId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAtBndBgp129Type2TemplateId indicates the the value of
the pwTemplateId object for the PW template entry used to create this
SDP Bind."
::= { sdpAtBndBgp129Type2Entry 1 }
sdpAtBndBgp129Type2SaiiGlobalId OBJECT-TYPE
SYNTAX TmnxPwGlobalId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAtBndBgp129Type2SaiiGlobalId indicates the global
identifier of Source Attachment Individual Identifier (SAII) portion
of the Generalized Id FEC element as used by this multi-segment
pseudo-wire provider-edge in this service."
::= { sdpAtBndBgp129Type2Entry 2 }
sdpAtBndBgp129Type2SaiiPrefix OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAtBndBgp129Type2SaiiPrefix indicates the prefix to the
Source Attachment Individual Identifier (SAII) portion of the
Generalized Id FEC element as used by this multi-segment pseudo-wire
provider-edge in this service."
::= { sdpAtBndBgp129Type2Entry 3 }
sdpAtBndBgp129Type2SaiiAcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAtBndBgp129Type2SaiiAcId indicates the attachment
circuit identifier part of Source Attachment Individual Identifier
(SAII) portion of the Generalized Id FEC element as used by this
multi-segment pseudo-wire provider-edge in this service."
::= { sdpAtBndBgp129Type2Entry 4 }
sdpAtBndBgp129Type2TaiiGlobalId OBJECT-TYPE
SYNTAX TmnxPwGlobalId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAtBndBgp129Type2TaiiGlobalId indicates the global
identifier of Taget Attachment Individual Identifier (TAII) portion of
the Generalized Id FEC element as used by this multi-segment
pseudo-wire provider-edge in this service."
::= { sdpAtBndBgp129Type2Entry 5 }
sdpAtBndBgp129Type2TaiiPrefix OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAtBndBgp129Type2TaiiPrefix indicates the prefix to the
Taget Attachment Individual Identifier (TAII) portion of the
Generalized Id FEC element as used by this multi-segment pseudo-wire
provider-edge in this service."
::= { sdpAtBndBgp129Type2Entry 6 }
sdpAtBndBgp129Type2TaiiAcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAtBndBgp129Type2TaiiAcId indicates the attachment
circuit identifier part of Taget Attachment Individual Identifier
(TAII) portion of the Generalized Id FEC element as used by this
multi-segment pseudo-wire provider-edge in this service."
::= { sdpAtBndBgp129Type2Entry 7 }
sdpBindEthCfmTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindEthCfmTableLastChanged indicates the sysUpTime at
the time of the last modification of the sdpBindEthCfmTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 36 }
sdpBindEthCfmTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindEthCfmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpBindEthCfmEntry has an entry for each SDP Bind entry from
sdpBindTable which was created on a service with ETH-CFM support."
::= { tmnxSdpObjs 37 }
sdpBindEthCfmEntry OBJECT-TYPE
SYNTAX SdpBindEthCfmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry contains BGP-related information for an SDP Bind entry
created as a result of BGP Auto-discovery with a FEC-129 Type 2."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindEthCfmTable 1 }
SdpBindEthCfmEntry ::= SEQUENCE
{
sdpBindEthCfmRowLastChanged TimeStamp,
sdpBindEthCfmVMepFilter TruthValue,
sdpBindEthCfmSquelchIngress BITS,
sdpBindEthCfmCollectLmmStats TruthValue,
sdpBindEthCfmCollLmmFcSts TFCSet,
sdpBindEthCfmCollLmmFcStsInP TFCSet,
sdpBindEthCfmSquelchIngressCtag BITS
}
sdpBindEthCfmRowLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindEthCfmRowLastChanged indicates the sysUpTime at
the time of the last modification to an object for this row.
If no changes were made to the entry since the instantiation of the
row, then this object contains a zero value."
::= { sdpBindEthCfmEntry 1 }
sdpBindEthCfmVMepFilter OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindEthCfmVMepFilter specifies whether ETH-CFM PDUs
egressing the sap or sdp-binding at the same level or lower than that
of the configured service MEP (the virtual MEP) should be discarded or
continue to egress.
Only PDUs that were originated from the virtual MEP or from
the networks side of the service will be affected, local
down MEP ETH-CFM transmission are not. When set to 'true'
ETH-CFM PDUs with the same or lower level as the virtual
MEP will be discarded. When set to 'false', egressing
ETH-CFM PDUs will pass freely as per the existing ETH-CFM
configuration."
DEFVAL { false }
::= { sdpBindEthCfmEntry 2 }
sdpBindEthCfmSquelchIngress OBJECT-TYPE
SYNTAX BITS {
level0 (0),
level1 (1),
level2 (2),
level3 (3),
level4 (4),
level5 (5),
level6 (6),
level7 (7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindEthCfmSquelchIngress specifies the ETH-CFM level
or levels that are silently discarded on ingress to the SDP binding.
Any received ETH-CFM PDU matching a level that has been set will be
dropped without regard for any other ETH-CFM criteria.
No statistical information or drop count will be available for any
ETH-CFM PDU that is silently discarded by this option."
DEFVAL { {} }
::= { sdpBindEthCfmEntry 3 }
sdpBindEthCfmCollectLmmStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindEthCfmCollectLmmStats specifies whether or not to
compute the Y.1731 Ethernet Loss Measurement (ETH-LM) RxFCl and TxFCl
service frame counters for the specified SDP. Note that when
sdpBindEthCfmCollectLmmStats is set to 'true', all data traffic
regardless of forwarding class level, both in and out of profile, will
be aggregated to a single stat counter.
Configuration of sdpBindEthCfmCollectLmmStats is mutually exclusive
with the forwarding class level aware objects
sdpBindEthCfmCollLmmFcSts and sdpBindEthCfmCollLmmFcStsInP.
The RxFCl and TxFCl counters are used by ETH-LM tests. An ETH-LM test
is created using TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRowStatus."
REFERENCE
"ITU-T G.8013/Y.1731, 'OAM functions and mechanisms for Ethernet based
networks', 11/2013, Section 8.1 'Frame loss measurement (ETH-LM)'."
DEFVAL { false }
::= { sdpBindEthCfmEntry 4 }
sdpBindEthCfmCollLmmFcSts OBJECT-TYPE
SYNTAX TFCSet
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindEthCfmCollLmmFcSts specifies which forwarding
class levels have enabled the computation for Y.1731 Ethernet Loss
Measurement (ETH-LM) RxFCl and TxFCl service frame counters for the
specified SDP. If the bit corresponding to a forwarding class level is
set, then a unique counter will be used to track all the combined in
and out of profile traffic associated with that forwarding class.
Note that no sdpBindEthCfmCollLmmFcSts bits can be set if
sdpBindEthCfmCollectLmmStats is set to 'true' as the two are mutually
exclusive.
The RxFCl and TxFCl counters are used by ETH-LM tests. An ETH-LM test
is created using TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRowStatus."
REFERENCE
"ITU-T G.8013/Y.1731, 'OAM functions and mechanisms for Ethernet based
networks', 11/2013, Section 8.1 'Frame loss measurement (ETH-LM)'."
DEFVAL { {} }
::= { sdpBindEthCfmEntry 5 }
sdpBindEthCfmCollLmmFcStsInP OBJECT-TYPE
SYNTAX TFCSet
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindEthCfmCollLmmFcStsInP specifies which forwarding
class levels (in profile only) have enabled the computation for Y.1731
Ethernet Loss Measurement (ETH-LM) RxFCl and TxFCl service frame
counters for the specified SDP. If the bit corresponding to a
forwarding class level is set, then a unique counter will be used to
track only all the in profile data traffic that is associated with
that forwarding class level.
Note that no sdpBindEthCfmCollLmmFcStsInP bits can be set if
sdpBindEthCfmCollectLmmStats is set to 'true' as the two are mutually
exclusive.
The RxFCl and TxFCl counters are used by ETH-LM tests. An ETH-LM test
is created using TIMETRA-OAM-PM-MIB::tmnxOamPmCfgLossLmmRowStatus."
REFERENCE
"ITU-T G.8013/Y.1731, 'OAM functions and mechanisms for Ethernet based
networks', 11/2013, Section 8.1 'Frame loss measurement (ETH-LM)'."
DEFVAL { {} }
::= { sdpBindEthCfmEntry 6 }
sdpBindEthCfmSquelchIngressCtag OBJECT-TYPE
SYNTAX BITS {
level0 (0),
level1 (1),
level2 (2),
level3 (3),
level4 (4),
level5 (5),
level6 (6),
level7 (7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindEthCfmSquelchIngressCtag specifies the ETH-CFM
level or levels of the ETH-CFM PDUs that are silently discarded using
additional VLAN space immediately following ingress service
delineation.
Any received ETH-CFM PDU matching a level that has been set will be
dropped without regard for the vlan-id in that additional space.
No statistical information or drop count will be available for any
ETH-CFM PDU that is silently discarded by this option."
DEFVAL { {} }
::= { sdpBindEthCfmEntry 7 }
sdpBindTlsSpbTblLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsSpbTblLastChanged indicates the sysUpTime at
the time of the last modification of sdpBindTlsSpbTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 38 }
sdpBindTlsSpbTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsSpbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains TLS SDP-Bind specific Shortest Path Bridging
(SPB) information."
::= { tmnxSdpObjs 39 }
sdpBindTlsSpbEntry OBJECT-TYPE
SYNTAX SdpBindTlsSpbEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry that contains TLS SDP-Bind specific SPB information."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindTlsSpbTable 1 }
SdpBindTlsSpbEntry ::= SEQUENCE
{
sdpBindTlsSpbRowStatus RowStatus,
sdpBindTlsSpbLastChgd TimeStamp,
sdpBindTlsSpbIfIndex InterfaceIndexOrZero,
sdpBindTlsSpbAdminState TmnxAdminState
}
sdpBindTlsSpbRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value of the object sdpBindTlsSpbRowStatus specifies the status
of this row."
::= { sdpBindTlsSpbEntry 1 }
sdpBindTlsSpbLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsSpbLastChgd indicates the timestamp of last
change to this row in sdpBindTlsSpbTable."
::= { sdpBindTlsSpbEntry 2 }
sdpBindTlsSpbIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsSpbIfIndex indicates the interface index
assigned to this SDP-Bind for Shortest Path Bridging."
::= { sdpBindTlsSpbEntry 3 }
sdpBindTlsSpbAdminState OBJECT-TYPE
SYNTAX TmnxAdminState
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The sdpBindTlsSpbAdminState specifies the desired administrative state
for Shortest Path Bridging on this sdp-bind."
DEFVAL { outOfService }
::= { sdpBindTlsSpbEntry 4 }
sdpPwPortTblLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpPwPortTblLastChanged indicates the sysUpTime at the
time of the last modification of sdpPwPortTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 40 }
sdpPwPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpPwPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains SDP specific pseudo-wire port information."
::= { tmnxSdpObjs 41 }
sdpPwPortEntry OBJECT-TYPE
SYNTAX SdpPwPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row entry that contains port specific pseudo-wire information."
INDEX {
sdpId,
sdpPwPortId
}
::= { sdpPwPortTable 1 }
SdpPwPortEntry ::= SEQUENCE
{
sdpPwPortId Unsigned32,
sdpPwPortRowStatus RowStatus,
sdpPwPortLastChgd TimeStamp,
sdpPwPortAdminStatus ServiceAdminStatus,
sdpPwPortVcId TmnxVcId,
sdpPwPortEncapType INTEGER,
sdpPwPortOperStatus INTEGER,
sdpPwPortOperFlags BITS,
sdpPwPortVcType SdpBindVcType,
sdpPwPortVlanVcTag Unsigned32,
sdpPwPortEgrShapVPort TNamedItemOrEmpty,
sdpPwPortEgrShapDefIntDestId TNamedItemOrEmpty,
sdpPwPortEgrShapSapSecShaper TNamedItemOrEmpty,
sdpPwPortMonOperGrp TNamedItemOrEmpty,
sdpPwPortIngVcLabel Unsigned32,
sdpPwPortEgrVcLabel Unsigned32,
sdpPwPortControlWord TruthValue,
sdpPwPortEntropyLabel TruthValue,
sdpPwPortAdvSvcMtu Integer32
}
sdpPwPortId OBJECT-TYPE
SYNTAX Unsigned32 (1..32767)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value of the object sdpPwPortId specifies the pseudo-wire port
identifier associated with the SDP."
::= { sdpPwPortEntry 1 }
sdpPwPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value of the object sdpPwPortRowStatus specifies the status of
this row.
The value of sdpPwPortVcId must be set to a non-default value when
creating a row."
::= { sdpPwPortEntry 2 }
sdpPwPortLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpPwPortLastChgd indicates the timestamp of last change
to this row in sdpPwPortTable."
::= { sdpPwPortEntry 3 }
sdpPwPortAdminStatus OBJECT-TYPE
SYNTAX ServiceAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpPwPortAdminStatus specifies the
administrative state of this pseudo-wire port entry."
DEFVAL { down }
::= { sdpPwPortEntry 4 }
sdpPwPortVcId OBJECT-TYPE
SYNTAX TmnxVcId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpPwPortVcId specifies the virtual circuit identifier
associated with this pseudo-wire port entry.
An 'inconsistentValue' error is returned if an attempt is made to
create a row entry in this table without specifying value of this
object."
::= { sdpPwPortEntry 5 }
sdpPwPortEncapType OBJECT-TYPE
SYNTAX INTEGER {
none (0),
dot1q (2),
qinq (10)
}
MAX-ACCESS read-create
STATUS obsolete
DESCRIPTION
"The value of sdpPwPortEncapType specifies the encapsulation type of
this pseudo-wire port entry.
The sdpPwPortEncapType object is replaced with
TIMETRA-PORT-MIB::tmnxPwPortEncapType object."
DEFVAL { dot1q }
::= { sdpPwPortEntry 6 }
sdpPwPortOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpPwPortOperStatus indicates the operating status of
this Service-SDP binding.
'up' The Service-SDP binding is operational.
'down' The binding is administratively down."
::= { sdpPwPortEntry 7 }
sdpPwPortOperFlags OBJECT-TYPE
SYNTAX BITS {
sdpBindAdminDown (0),
svcAdminDown (1),
stitchingSvcTxDown (2),
sdpOperDown (3),
sdpPathMtuTooSmall (4),
noIngressVcLabel (5),
noEgressVcLabel (6),
svcMtuMismatch (7),
vcTypeMismatch (8),
relearnLimitExceeded (9),
iesIfAdminDown (10),
releasedIngressVcLabel (11),
labelsExhausted (12),
svcParamMismatch (13),
insufficientBandwidth (14),
pwPeerFaultStatusBits (15),
meshSdpDown (16),
notManagedByMcRing (17),
outOfResource (18),
mhStandby (19),
oamDownMepFault (20),
oamUpMepFault (21),
standbySigSlaveTxDown (22),
operGrpDown (23),
withdrawnIngressVcLabel (24),
labelStackLimitExceeded (25),
stitchingSvcPwFault (26)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates all the conditions that affect the operating
status of this pseudo-wire port:
The bit values are as follows:
sdpBindAdminDown (0) - SDP Bind is admin down.
svcAdminDown (1) - Service is admin down.
stitchingSvcTxDown (2) - PW-PORT FPE stitching svc
transmit is down
sdpOperDown (3) - SDP is oper down.
sdpPathMtuTooSmall (4) - SDP's path MTU minus SDP Bind control
word size is less than Service MTU.
noIngressVcLabel (5) - No ingress VC label.
noEgressVcLabel (6) - No egress VC label.
svcMtuMismatch (7) - Service MTU mismatch with the
remote PE.
vcTypeMismatch (8) - VC type mismatch with the remote PE.
relearnLimitExceeded (9) - MAC relearn limit was exceeded
(TLS only).
iesIfAdminDown (10) - IP interface is admin down
(IES and VPRN only).
releasedIngressVcLabel (11) - Peer released our ingress VC label.
labelsExhausted (12) - Label Manager has ran out of labels.
svcParamMismatch (13) - Service-specific parameter mismatch.
insufficientBandwidth (14) - Insufficient bandwidth to allocate
to SDP binding.
pwPeerFaultStatusBits (15) - Received PW fault status bits from
peer.
meshSdpDown (16) - Mesh SDP Down.
notManagedByMcRing (17) - Not managed by mc-ring.
outOfResource (18) - Such as memory.
mhStandby (19) - Standby due to BGP.
multi-home protocol.
oamDownMepFault (20) - ETH-CFM down MEP fault detected.
oamUpMepFault (21) - ETH-CFM up MEP fault detected.
standbySigSlaveTxDown (22) - Transmit is down for
standby-sig-spoke.
operGrpDown (23) - Operational group is down.
withdrawnIngressVcLabel(24) - Withdrawn due to incompatibility.
labelStackLimitExceeded(25) - label stack overhead exceeding the
egress IOM limitation.
stitchingSvcPwFault(26) - stitching-svc-pw-fault"
::= { sdpPwPortEntry 8 }
sdpPwPortVcType OBJECT-TYPE
SYNTAX SdpBindVcType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpPwPortVcType specifies the type of virtual circuit
(VC) associated with this pseudo-wire port entry."
DEFVAL { ether }
::= { sdpPwPortEntry 9 }
sdpPwPortVlanVcTag OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpPwPortVlanVcTag specifies the VLAN VC tag for this
pseudo-wire port entry."
DEFVAL { '0fff'H }
::= { sdpPwPortEntry 10 }
sdpPwPortEgrShapVPort OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpPwPortEgrShapVPort specifies the virtual port name of
the shaper on the egress side for this pseudo-wire port entry."
DEFVAL { ''H }
::= { sdpPwPortEntry 11 }
sdpPwPortEgrShapDefIntDestId OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpPwPortEgrShapDefIntDestId specifies the default
intermediate destination identifier on the egress side for this
pseudo-wire port entry."
DEFVAL { ''H }
::= { sdpPwPortEntry 12 }
sdpPwPortEgrShapSapSecShaper OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpPwPortEgrShapSapSecShaper specifies the SAP secondary
shaper associated on the egress side for this pseudo-wire port entry."
DEFVAL { ''H }
::= { sdpPwPortEntry 13 }
sdpPwPortMonOperGrp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the sdpPwPortMonOperGrp specifies the monitoring
operational group name associated with this pseudo-wire port entry."
DEFVAL { ''H }
::= { sdpPwPortEntry 14 }
sdpPwPortIngVcLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpPwPortIngVcLabel specifies the static MPLS VC label
used by the far-end device to send packets to this SDP."
DEFVAL { 0 }
::= { sdpPwPortEntry 15 }
sdpPwPortEgrVcLabel OBJECT-TYPE
SYNTAX Unsigned32 (0 | 16..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpPwPortEgrVcLabel specifies the static MPLS VC label
used by this device to send packets to the far-end device in this SDP."
DEFVAL { 0 }
::= { sdpPwPortEntry 16 }
sdpPwPortControlWord OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The sdpPwPortControlWord specifies whether the use of the
'ControlWord' is preferred or not."
DEFVAL { false }
::= { sdpPwPortEntry 17 }
sdpPwPortEntropyLabel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The sdpPwPortEntropyLabel specifies whether the use of the
entropy-lable is preferred or not."
DEFVAL { false }
::= { sdpPwPortEntry 18 }
sdpPwPortAdvSvcMtu OBJECT-TYPE
SYNTAX Integer32 (-1 | 0 | 1..9782)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The sdpPwPortAdvSvcMtu specifies the service MTU size used. Value of
zero indicates that MTU size is derived from SDP path MTU."
DEFVAL { -1 }
::= { sdpPwPortEntry 19 }
sdpGrpTblLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpGrpTblLastChanged indicates the sysUpTime at the time
of the last modification of sdpGrpTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 42 }
sdpGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains SDP Group information."
::= { tmnxSdpObjs 43 }
sdpGrpEntry OBJECT-TYPE
SYNTAX SdpGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row specifies information about a specific SDP Group."
INDEX { sdpGrpName }
::= { sdpGrpTable 1 }
SdpGrpEntry ::= SEQUENCE
{
sdpGrpName TNamedItem,
sdpGrpRowStatus RowStatus,
sdpGrpLastChange TimeStamp,
sdpGrpValue Unsigned32
}
sdpGrpName OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the object sdpGrpName specifies the SDP Group identifier."
::= { sdpGrpEntry 1 }
sdpGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value of the object sdpGrpRowStatus specifies the status of this
row."
::= { sdpGrpEntry 2 }
sdpGrpLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpGrpLastChange indicates the timestamp of last change
to this row in sdpGrpTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { sdpGrpEntry 3 }
sdpGrpValue OBJECT-TYPE
SYNTAX Unsigned32 (0..31)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value of the object sdpGrpValue specifies the value associated
with this SDP group."
DEFVAL { 0 }
::= { sdpGrpEntry 4 }
sdpSdpGrpTblLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpSdpGrpTblLastChanged indicates the sysUpTime at the
time of the last modification of sdpSdpGrpTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 44 }
sdpSdpGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpSdpGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains SDP group information in which SDPs
participates."
::= { tmnxSdpObjs 45 }
sdpSdpGrpEntry OBJECT-TYPE
SYNTAX SdpSdpGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row specifies information about a specific SDP participation with
a specific SDP group."
INDEX {
sdpId,
sdpGrpName
}
::= { sdpSdpGrpTable 1 }
SdpSdpGrpEntry ::= SEQUENCE
{
sdpSdpGrpRowStatus RowStatus,
sdpSdpGrpLastChange TimeStamp
}
sdpSdpGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value of the object sdpSdpGrpRowStatus specifies the status of
this row."
::= { sdpSdpGrpEntry 1 }
sdpSdpGrpLastChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpSdpGrpLastChange indicates the timestamp of last
change to this row in sdpSdpGrpTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { sdpSdpGrpEntry 2 }
pwTempIncSdpGrpTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of pwTempIncSdpGrpTableLastChanged indicates the sysUpTime
at the time of the last modification of pwTempIncSdpGrpTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 46 }
pwTempIncSdpGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwTempIncSdpGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains entries for pseudowire (PW) templates specifying
included SDP groups."
::= { tmnxSdpObjs 47 }
pwTempIncSdpGrpEntry OBJECT-TYPE
SYNTAX PwTempIncSdpGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains specific included SDP group information for a
specific pseudowire (PW) template."
INDEX {
pwTemplateId,
sdpGrpName
}
::= { pwTempIncSdpGrpTable 1 }
PwTempIncSdpGrpEntry ::= SEQUENCE
{
pwTempIncSdpGrpRowStatus RowStatus,
pwTempIncSdpGrpLastChanged TimeStamp
}
pwTempIncSdpGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTempIncSdpGrpRowStatus is used for the creation and
deletion of entries in the table."
::= { pwTempIncSdpGrpEntry 1 }
pwTempIncSdpGrpLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of pwTempIncSdpGrpLastChanged indicates the sysUpTime at the
time of the last modification of this entry.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { pwTempIncSdpGrpEntry 2 }
pwTempExcSdpGrpTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of pwTempExcSdpGrpTableLastChanged indicates the sysUpTime
at the time of the last modification of pwTempExcSdpGrpTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 48 }
pwTempExcSdpGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwTempExcSdpGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains entries for pseudowire (PW) templates specifying
excluded SDP groups."
::= { tmnxSdpObjs 49 }
pwTempExcSdpGrpEntry OBJECT-TYPE
SYNTAX PwTempExcSdpGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains specific excluded SDP group information for a
specific pseudowire (PW) template."
INDEX {
pwTemplateId,
sdpGrpName
}
::= { pwTempExcSdpGrpTable 1 }
PwTempExcSdpGrpEntry ::= SEQUENCE
{
pwTempExcSdpGrpRowStatus RowStatus,
pwTempExcSdpGrpLastChanged TimeStamp
}
pwTempExcSdpGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of pwTempExcSdpGrpRowStatus is used for the creation and
deletion of entries in the table."
::= { pwTempExcSdpGrpEntry 1 }
pwTempExcSdpGrpLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of pwTempExcSdpGrpLastChanged indicates the sysUpTime at the
time of the last modification of this entry.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { pwTempExcSdpGrpEntry 2 }
sdpBindPwPathTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindPwPathTableLastChanged indicates the sysUpTime at
the time of the last modification of sdpBindPwPathTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 50 }
sdpBindPwPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindPwPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpBindPwPathTable contains Pseudo-Wire path information per SDP
binding."
::= { tmnxSdpObjs 51 }
sdpBindPwPathEntry OBJECT-TYPE
SYNTAX SdpBindPwPathEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpBindPwPathEntry contains Pseudo-Wire path information for
specific SDP binding."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindPwPathTable 1 }
SdpBindPwPathEntry ::= SEQUENCE
{
sdpBindPwPathRowStatus RowStatus,
sdpBindPwPathLastChanged TimeStamp,
sdpBindPwPathAgi TmnxVPNRouteDistinguisher,
sdpBindPwPathSaiiGlobalId TmnxMplsTpGlobalID,
sdpBindPwPathSaiiNodeId TmnxMplsTpNodeID,
sdpBindPwPathSaiiAcId Unsigned32,
sdpBindPwPathTaiiGlobalId TmnxMplsTpGlobalID,
sdpBindPwPathTaiiNodeId TmnxMplsTpNodeID,
sdpBindPwPathTaiiAcId Unsigned32
}
sdpBindPwPathRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindPwPathRowStatus is used for the creation and
deletion of entries in the table."
::= { sdpBindPwPathEntry 1 }
sdpBindPwPathLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindPwPathLastChanged indicates the sysUpTime at the
time of the last modification of this entry.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { sdpBindPwPathEntry 2 }
sdpBindPwPathAgi OBJECT-TYPE
SYNTAX TmnxVPNRouteDistinguisher
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindPwPathAgi specifies the Attachment Group
Identifier (AGI) portion of the Generalized Id FEC element from the
pseudowire setup for this SDP Bind."
DEFVAL { '0000000000000000'H }
::= { sdpBindPwPathEntry 3 }
sdpBindPwPathSaiiGlobalId OBJECT-TYPE
SYNTAX TmnxMplsTpGlobalID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindPwPathSaiiGlobalId specifies the global identifier
of Source Attachment Individual Identifier (SAII) portion of the
Generalized Id FEC element as used by this SDP binding in this
service."
DEFVAL { 0 }
::= { sdpBindPwPathEntry 4 }
sdpBindPwPathSaiiNodeId OBJECT-TYPE
SYNTAX TmnxMplsTpNodeID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindPwPathSaiiNodeId specifies the MPLS-TP node
identifier to the Source Attachment Individual Identifier (SAII)
portion of the Generalized Id FEC element as used by this SDP binding
in this service."
DEFVAL { 0 }
::= { sdpBindPwPathEntry 5 }
sdpBindPwPathSaiiAcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindPwPathSaiiAcId specifies the attachment circuit
identifier part of Source Attachment Individual Identifier (SAII)
portion of the Generalized Id FEC element as used by this SDP binding
in this service."
DEFVAL { 0 }
::= { sdpBindPwPathEntry 6 }
sdpBindPwPathTaiiGlobalId OBJECT-TYPE
SYNTAX TmnxMplsTpGlobalID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindPwPathTaiiGlobalId specifies the global identifier
of Target Attachment Individual Identifier (TAII) portion of the
Generalized Id FEC element as used by this SDP binding in this
service."
DEFVAL { 0 }
::= { sdpBindPwPathEntry 7 }
sdpBindPwPathTaiiNodeId OBJECT-TYPE
SYNTAX TmnxMplsTpNodeID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindPwPathTaiiNodeId specifies the MPLS-TP node
identifier to the Target Attachment Individual Identifier (TAII)
portion of the Generalized Id FEC element as used by this SDP binding
in this service."
DEFVAL { 0 }
::= { sdpBindPwPathEntry 8 }
sdpBindPwPathTaiiAcId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindPwPathTaiiAcId specifies the attachment circuit
identifier part of Target Attachment Individual Identifier (TAII)
portion of the Generalized Id FEC element as used by this SDP binding
in this service."
DEFVAL { 0 }
::= { sdpBindPwPathEntry 9 }
sdpBindCtrlChanPwTableLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindCtrlChanPwTableLastChgd indicates the sysUpTime at
the time of the last modification of sdpBindCtrlChanPwTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 52 }
sdpBindCtrlChanPwTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindCtrlChanPwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpBindCtrlChanPwTable contains control channel Pseudo-Wire
information per SDP binding."
::= { tmnxSdpObjs 53 }
sdpBindCtrlChanPwEntry OBJECT-TYPE
SYNTAX SdpBindCtrlChanPwEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpBindCtrlChanPwEntry contains control channel Pseudo-Wire
information for specific SDP binding."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindCtrlChanPwTable 1 }
SdpBindCtrlChanPwEntry ::= SEQUENCE
{
sdpBindCtrlChanPwLastChanged TimeStamp,
sdpBindCtrlChanPwStatus TmnxEnabledDisabled,
sdpBindCtrlChanPwRefreshTimer Unsigned32,
sdpBindCtrlChanPwPeerExpired TruthValue,
sdpBindCtrlChanPwRequestTimer Unsigned32,
sdpBindCtrlChanPwRetryTimer Unsigned32,
sdpBindCtrlChanPwTimeoutMult Unsigned32,
sdpBindCtrlChanPwAck TruthValue
}
sdpBindCtrlChanPwLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindCtrlChanPwLastChanged indicates the sysUpTime at
the time of the last modification of this entry.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { sdpBindCtrlChanPwEntry 1 }
sdpBindCtrlChanPwStatus OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindCtrlChanPwStatus specifies the status of control
channel for the pseudo-wire path for this SDP binding."
DEFVAL { disabled }
::= { sdpBindCtrlChanPwEntry 2 }
sdpBindCtrlChanPwRefreshTimer OBJECT-TYPE
SYNTAX Unsigned32 (0 | 10..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindCtrlChanPwRefreshTimer specifies the refresh timer
value to be used when control channel for the pseudo-wire path is
enabled for this SDP binding.
An 'inconsistentValue' error is returned if the value of
sdpBindCtrlChanPwRequestTimer is set to non-zero when
sdpBindCtrlChanPwRefreshTimer is set to non-zero."
DEFVAL { 0 }
::= { sdpBindCtrlChanPwEntry 3 }
sdpBindCtrlChanPwPeerExpired OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindCtrlChanPwPeerExpired indicates whether
sdpBindCtrlChanPwStatus was not received after 3.5 times of
sdpBindCtrlChanPwRefreshTimer value for the pseudo-wire path for this
SDP binding."
::= { sdpBindCtrlChanPwEntry 4 }
sdpBindCtrlChanPwRequestTimer OBJECT-TYPE
SYNTAX Unsigned32 (0 | 10..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindCtrlChanPwRequestTimer specifies the request timer
value to be used when control channel for the pseudo-wire path is
enabled for this SDP binding.
An 'inconsistentValue' error is returned if the value of
sdpBindCtrlChanPwRequestTimer is set to non-zero when
sdpBindCtrlChanPwRefreshTimer is set to non-zero.
An 'inconsistentValue' error is returned if the value of
sdpBindCtrlChanPwRequestTimer is set to non-zero when value of either
sdpBindCtrlChanPwRetryTimer or sdpBindCtrlChanPwTimeoutMult is also
set to zero."
DEFVAL { 0 }
::= { sdpBindCtrlChanPwEntry 5 }
sdpBindCtrlChanPwRetryTimer OBJECT-TYPE
SYNTAX Unsigned32 (0 | 3..60)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindCtrlChanPwRetryTimer specifies the retry timer
value to be used for the request timer when control channel for the
pseudo-wire path is enabled for this SDP binding.
An 'inconsistentValue' error is returned if the value of
sdpBindCtrlChanPwRequestTimer is set to non-zero when value of either
sdpBindCtrlChanPwRetryTimer or sdpBindCtrlChanPwTimeoutMult is also
set to zero."
DEFVAL { 0 }
::= { sdpBindCtrlChanPwEntry 6 }
sdpBindCtrlChanPwTimeoutMult OBJECT-TYPE
SYNTAX Unsigned32 (0 | 3..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindCtrlChanPwTimeoutMult specifies the timeout
multiplier value to be used for the retry timer to resend the request
when control channel for the pseudo-wire path is enabled for this SDP
binding.
An 'inconsistentValue' error is returned if the value of
sdpBindCtrlChanPwRequestTimer is set to non-zero when value of either
sdpBindCtrlChanPwRetryTimer or sdpBindCtrlChanPwTimeoutMult is also
set to zero."
DEFVAL { 0 }
::= { sdpBindCtrlChanPwEntry 7 }
sdpBindCtrlChanPwAck OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindCtrlChanPwAck specifies whether acknowledgement is
enabled to respond to control channel status messages sent by the peer
and processed on receipt from peer for this SDP binding."
REFERENCE
"http://tools.ietf.org/html/rfc6478#page-7"
DEFVAL { false }
::= { sdpBindCtrlChanPwEntry 8 }
sdpAutoBindBgpVpwsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpAutoBindBgpVpwsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpAutoBindBgpVpwsTable has an entry for each SDP Bind entry from
sdpBindTable which was created as a result of BGP VPWS binding."
::= { tmnxSdpObjs 54 }
sdpAutoBindBgpVpwsEntry OBJECT-TYPE
SYNTAX SdpAutoBindBgpVpwsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry contains BGP-related information for an SDP Bind entry
created as a result of BGP VPWS binding."
INDEX {
svcId,
sdpBindId
}
::= { sdpAutoBindBgpVpwsTable 1 }
SdpAutoBindBgpVpwsEntry ::= SEQUENCE
{ sdpAutoBindBgpVpwsTemplateId PWTemplateId }
sdpAutoBindBgpVpwsTemplateId OBJECT-TYPE
SYNTAX PWTemplateId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpAutoBindBgpVpwsTemplateId indicates the the value of
the pwTemplateId object for the PW template entry used to create this
SDP Bind."
::= { sdpAutoBindBgpVpwsEntry 1 }
sdpBindL2tpv3Table OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindL2tpv3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpBindL2tpv3Table has an entry for each SDP Bind entry from
sdpBindTable when sdpDelivery of the SDP is set to 'l2tpv3'."
::= { tmnxSdpObjs 55 }
sdpBindL2tpv3Entry OBJECT-TYPE
SYNTAX SdpBindL2tpv3Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row entry contains L2TP v3 information for an SDP Bind entry
created when sdpDelivery of the SDP is set to 'l2tpv3'."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindL2tpv3Table 1 }
SdpBindL2tpv3Entry ::= SEQUENCE
{
sdpBindL2tpv3IngressCookie OCTET STRING,
sdpBindL2tpv3EgressCookie OCTET STRING,
sdpBindL2tpv3SessMismatch TruthValue,
sdpBindL2tpv3SessMismatchLstClrd TimeStamp,
sdpBindL2tpv3IngressCookie2 OCTET STRING
}
sdpBindL2tpv3IngressCookie OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindL2tpv3IngressCookie specifies the value of cookie
to match on the L2TP-V3 tunnel on the ingress side of this sdp-bind."
DEFVAL { '0000000000000000'H }
::= { sdpBindL2tpv3Entry 1 }
sdpBindL2tpv3EgressCookie OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindL2tpv3EgressCookie specifies the value of L2TP-V3
tunnel cookie that will be sent on the egress side of this sdp-bind."
DEFVAL { '0000000000000000'H }
::= { sdpBindL2tpv3Entry 2 }
sdpBindL2tpv3SessMismatch OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindL2tpv3SessMismatch indicates whether
a session mismatch occurred on the L2TP-V3 tunnel on this sdp-bind
because of one or more of the following reasons (since last time this
was cleared):
- sdpBindL2tpv3IngressCookie mismatch,
- sdpLocalEndInetAddress mismatch,
- sdpFarEndInetAddress mismatch,
- invalid session identifier."
::= { sdpBindL2tpv3Entry 3 }
sdpBindL2tpv3SessMismatchLstClrd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindL2tpv3SessMismatchLstClrd indicates the time when
session mismatch on the L2TP-V3 tunnel on this sdp-bind was last
cleared."
::= { sdpBindL2tpv3Entry 4 }
sdpBindL2tpv3IngressCookie2 OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of sdpBindL2tpv3IngressCookie2 specifies the value of second
cookie to match on the L2TP-V3 tunnel on the ingress side of this
sdp-bind."
DEFVAL { '0000000000000000'H }
::= { sdpBindL2tpv3Entry 5 }
sdpBindTlsStaticIsidRngTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsStaticIsidRngEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains the ISID range information for SDP BINDs."
::= { tmnxSdpObjs 56 }
sdpBindTlsStaticIsidRngEntry OBJECT-TYPE
SYNTAX SdpBindTlsStaticIsidRngEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry maintains the static range information for a specific
SDP-BIND in a specific VPLS service."
INDEX {
svcId,
sdpBindId,
sdpBindTlsStaticIsidRngId
}
::= { sdpBindTlsStaticIsidRngTable 1 }
SdpBindTlsStaticIsidRngEntry ::= SEQUENCE
{
sdpBindTlsStaticIsidRngId Unsigned32,
sdpBindTlsStaticIsidRngRowStatus RowStatus,
sdpBindTlsStaticIsidRngLastChgd TimeStamp,
sdpBindTlsStaticIsidRngLow TmnxISID,
sdpBindTlsStaticIsidRngHigh TmnxISID
}
sdpBindTlsStaticIsidRngId OBJECT-TYPE
SYNTAX Unsigned32 (1..8191)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of sdpBindTlsStaticIsidRngId specifies the range identifier
for the ISID policy."
::= { sdpBindTlsStaticIsidRngEntry 1 }
sdpBindTlsStaticIsidRngRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindTlsStaticIsidRngRowStatus is used for the creation
and deletion of rows in this table."
::= { sdpBindTlsStaticIsidRngEntry 2 }
sdpBindTlsStaticIsidRngLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsStaticIsidRngLastChgd indicates the timestamp
of last change to this row in sdpBindTlsStaticIsidRngTable."
::= { sdpBindTlsStaticIsidRngEntry 3 }
sdpBindTlsStaticIsidRngLow OBJECT-TYPE
SYNTAX TmnxISID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindTlsStaticIsidRngLow specifies the low value of the
range for this entry."
DEFVAL { 0 }
::= { sdpBindTlsStaticIsidRngEntry 4 }
sdpBindTlsStaticIsidRngHigh OBJECT-TYPE
SYNTAX TmnxISID
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindTlsStaticIsidRngHigh specifies the high value of
the range for this entry."
DEFVAL { 0 }
::= { sdpBindTlsStaticIsidRngEntry 5 }
sdpBindDhcp6InfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindDhcp6InfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains DHCP6 information related to a SDP Bind.
A row will exist in this table for each spoke SDP in a TLS Service.
Rows are created and deleted automatically by the system."
::= { tmnxSdpObjs 57 }
sdpBindDhcp6InfoEntry OBJECT-TYPE
SYNTAX SdpBindDhcp6InfoEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DHCP6 specific information about an SDP Bind."
AUGMENTS { sdpBindDhcpInfoEntry }
::= { sdpBindDhcp6InfoTable 1 }
SdpBindDhcp6InfoEntry ::= SEQUENCE
{
sdpBindDhcp6Description ServObjDesc,
sdpBindDhcp6Snoop TmnxEnabledDisabled
}
sdpBindDhcp6Description OBJECT-TYPE
SYNTAX ServObjDesc
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcp6Description specifies a user
provided description for DHCP6 on this Sdp Bind."
DEFVAL { ''H }
::= { sdpBindDhcp6InfoEntry 1 }
sdpBindDhcp6Snoop OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object sdpBindDhcp6Snoop specifies whether or not
DHCP6 snooping is enabled on the Sdp Bind."
DEFVAL { disabled }
::= { sdpBindDhcp6InfoEntry 2 }
sdpBindTlsStaticIsidTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsStaticIsidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains the information for each static ISID for
SDP-BINDs."
::= { tmnxSdpObjs 58 }
sdpBindTlsStaticIsidEntry OBJECT-TYPE
SYNTAX SdpBindTlsStaticIsidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry maintains the information for a specific ISID associated
with the specific SDP-BIND in a specific VPLS service.
Entries are created and deleted by the system."
INDEX {
svcId,
sdpBindId,
sdpBindTlsStaticIsid
}
::= { sdpBindTlsStaticIsidTable 1 }
SdpBindTlsStaticIsidEntry ::= SEQUENCE
{
sdpBindTlsStaticIsid TmnxISID,
sdpBindTlsStaticIsidStatus TmnxIsidMFibStatus
}
sdpBindTlsStaticIsid OBJECT-TYPE
SYNTAX TmnxISID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of sdpBindTlsStaticIsid indicates ISID of this entry."
::= { sdpBindTlsStaticIsidEntry 1 }
sdpBindTlsStaticIsidStatus OBJECT-TYPE
SYNTAX TmnxIsidMFibStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsStaticIsidStatus indicates the MFIB status of
this ISID."
::= { sdpBindTlsStaticIsidEntry 2 }
sdpBindEthLoopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindEthLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table sdpBindEthLoopbackTable provides operators with the ability
to provide loopback functions on a specific SDP binding in order to
test Ethernet Virtual Circuits (EVC)."
::= { tmnxSdpObjs 59 }
sdpBindEthLoopbackEntry OBJECT-TYPE
SYNTAX SdpBindEthLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents an active SDP binding loopback. The SDP binding
is placed in loopback by row creation and is removed by row
destruction.
Rows in table sdpBindEthLoopbackTable are created and destroyed by
SNMP set operations on the object sdpBindEthLoopbackRowStatus. Rows in
table sdpBindEthLoopbackTable may be destroyed by the system when the
associated SDP binding has been deleted. A maximum of 64 rows may be
created. Rows are kept in volatile storage and lost upon a system
reboot."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindEthLoopbackTable 1 }
SdpBindEthLoopbackEntry ::= SEQUENCE
{
sdpBindEthLoopbackRowStatus RowStatus,
sdpBindEthLoopbackMode INTEGER,
sdpBindEthLoopbackMacSwap TmnxEnabledDisabled,
sdpBindEthLoopbackMacSwapAddr MacAddress,
sdpBindEthLoopbackMacSwapAddrAll TruthValue
}
sdpBindEthLoopbackRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindEthLoopbackRowStatus specifies the row
status. It allows entries to be created and deleted in
sdpBindEthLoopbackTable.
Rows are created by specifying the value 'createAndGo(4)' and deleted
by specifying the value 'destroy(6)'. If the associated SDP is
deleted, the sdpBindEthLoopbackEntry row will be deleted by the
system.
Row creation will fail if the service identifier and the SDP binding
do not exist in MIB table sdpBindTable with a
TIMETRA-SERV-MIB::svcType of 'epipe(1)' or 'tls(3)', which encompasses
EPIPE, PBB (Provider Backbone Bridging) EPIPE, VPLS (Virtual Private
LAN Service), and I-VPLS services."
::= { sdpBindEthLoopbackEntry 1 }
sdpBindEthLoopbackMode OBJECT-TYPE
SYNTAX INTEGER {
ingress (1),
egress (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindEthLoopbackMode specifies how traffic
will be reflected.
If the value is set to 'ingress(1)', traffic arriving at the SDP
binding ingress will be reflected back out the same SDP binding. If
the value is set to 'egress(2)', traffic arriving at the SDP binding
egress will be reflected back into the service in the direction of the
original source."
::= { sdpBindEthLoopbackEntry 2 }
sdpBindEthLoopbackMacSwap OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindEthLoopbackMacSwap specifies the
enabling or disabling of source address and destination address
swapping for the reflected packets when the arriving packet is
unicast. With sdpBindEthLoopbackMacSwap enabled, any broadcast or
multicast packets arriving on a looped point will be dropped."
DEFVAL { disabled }
::= { sdpBindEthLoopbackEntry 3 }
sdpBindEthLoopbackMacSwapAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindEthLoopbackMacSwapAddr specifies the
source MAC address used in the reflected packet when the arriving
packet is broadcast or multicast. This does not apply to arriving
unicast packets."
DEFVAL { '000000000000'H }
::= { sdpBindEthLoopbackEntry 4 }
sdpBindEthLoopbackMacSwapAddrAll OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindEthLoopbackMacSwapAddrAll specifies
whether or not to use the configured sdpBindEthLoopbackMacSwapAddr as
the source address for all reflected parameters."
DEFVAL { false }
::= { sdpBindEthLoopbackEntry 5 }
sdpBindTlsFdbMacStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindTlsFdbMacStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table maintains the count of MAC address entries per FDB type for
the SDPs in VPLS services."
::= { tmnxSdpObjs 60 }
sdpBindTlsFdbMacStatsEntry OBJECT-TYPE
SYNTAX SdpBindTlsFdbMacStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry maintains the count of MAC address entries per FDB type for
the SDP in a VPLS service."
INDEX {
svcId,
sdpBindId,
tlsFdbType
}
::= { sdpBindTlsFdbMacStatsTable 1 }
SdpBindTlsFdbMacStatsEntry ::= SEQUENCE
{ sdpBindTlsFdbMacStatsNumEntries Unsigned32 }
sdpBindTlsFdbMacStatsNumEntries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsFdbMacStatsNumEntries indicates the number of
MAC address entries of the FDB type in the SDP in this service."
::= { sdpBindTlsFdbMacStatsEntry 1 }
sdpBindPwLoopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindPwLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table sdpBindPwLoopbackTable provides operators with the ability
to provide loopback functions on a specific SDP binding in order to
test pseudo-wire Virtual Circuits (EVC)."
::= { tmnxSdpObjs 61 }
sdpBindPwLoopbackEntry OBJECT-TYPE
SYNTAX SdpBindPwLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents an active SDP binding loopback. The SDP binding
is placed in loopback by row creation and is removed by row
destruction.
Rows in table sdpBindPwLoopbackTable are created and destroyed by SNMP
set operations on the object sdpBindPwLoopbackRowStatus. Rows in table
sdpBindPwLoopbackTable may be destroyed by the system when the
associated SDP binding has been deleted. A maximum of 64 rows may be
created. Rows are kept in volatile storage and lost upon a system
reboot."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindPwLoopbackTable 1 }
SdpBindPwLoopbackEntry ::= SEQUENCE
{ sdpBindPwLoopbackRowStatus RowStatus }
sdpBindPwLoopbackRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindPwLoopbackRowStatus specifies the row
status. It allows entries to be created and deleted in
sdpBindPwLoopbackTable.
Rows are created by specifying the value 'createAndGo(4)' and deleted
by specifying the value 'destroy(6)'. If the associated SDP is
deleted, the sdpBindPwLoopbackEntry row will be deleted by the system.
Row creation will fail if the service identifier and the SDP binding
do not exist in MIB table sdpBindTable with a
TIMETRA-SERV-MIB::svcType of 'apipe', 'cpipe', 'epipe' or 'tls'."
::= { sdpBindPwLoopbackEntry 1 }
sdpBindPwAdminLockTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindPwAdminLockEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table sdpBindPwAdminLockTable provides operators with the ability
to provide administrative lock functions on a specific SDP binding in
order to test pseudo-wire Virtual Circuits."
::= { tmnxSdpObjs 62 }
sdpBindPwAdminLockEntry OBJECT-TYPE
SYNTAX SdpBindPwAdminLockEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents an active SDP binding adminstrative lock
operation. The SDP binding is placed in adminstrative lock by row
creation and is removed by row destruction.
Rows in table sdpBindPwAdminLockTable are created and destroyed by
SNMP set operations on the object sdpBindPwAdminLockRowStatus. Rows in
table sdpBindPwAdminLockTable may be destroyed by the system when the
associated SDP binding has been deleted. A maximum of 64 rows may be
created. Rows are kept in volatile storage and lost upon a system
reboot."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindPwAdminLockTable 1 }
SdpBindPwAdminLockEntry ::= SEQUENCE
{
sdpBindPwAdminLockRowStatus RowStatus,
sdpBindPwAdminLockTestSvc TmnxServId
}
sdpBindPwAdminLockRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the object sdpBindPwAdminLockRowStatus specifies the row
status. It allows entries to be created and deleted in
sdpBindPwAdminLockTable.
Rows are created by specifying the value 'createAndGo(4)' and deleted
by specifying the value 'destroy(6)'. If the associated SDP is
deleted, the sdpBindPwAdminLockEntry row will be deleted by the
system.
Row creation will fail if the service identifier and the SDP binding
do not exist in MIB table sdpBindTable with a
TIMETRA-SERV-MIB::svcType of 'apipe', 'cpipe', 'epipe' or 'tls'."
::= { sdpBindPwAdminLockEntry 1 }
sdpBindPwAdminLockTestSvc OBJECT-TYPE
SYNTAX TmnxServId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the sdpBindPwAdminLockTestSvc specifies the test service
identifier associated with this administrative lock operation.
An 'inconsistentValue' error is returned if this object is set to a
different value at any time after the row is already created."
DEFVAL { 0 }
::= { sdpBindPwAdminLockEntry 2 }
pwTemplateAugTableLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of pwTemplateAugTableLastChgd indicates the sysUpTime at the
time of the last modification of pwTemplateAugTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 63 }
pwTemplateAugTable OBJECT-TYPE
SYNTAX SEQUENCE OF PwTemplateAugEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains entries for pseudowire (PW) templates specifying
additional SDP auto-binding information."
::= { tmnxSdpObjs 64 }
pwTemplateAugEntry OBJECT-TYPE
SYNTAX PwTemplateAugEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This pwTemplateAugEntry contains additional information about a
specific PW template."
AUGMENTS { pwTemplateEntry }
::= { pwTemplateAugTable 1 }
PwTemplateAugEntry ::= SEQUENCE
{
pwTemplateAugLastChgd TimeStamp,
pwTemplateAugStpAutoEdge TmnxEnabledDisabled,
pwTemplateAugStpRapidStart TmnxEnabledDisabled,
pwTemplateAugStpAdminPtToPt INTEGER,
pwTemplateAugStpPathCost Integer32,
pwTemplateAugStpPriority Integer32,
pwTemplateAugStpRootGuard TruthValue,
pwTemplateAugStpAdminStatus TmnxEnabledDisabledAdminState,
pwTemplateAugL2ptTermination TmnxEnabledDisabled,
pwTemplateAugL2ptProtocols L2ptProtocols,
pwTemplateAugGreAllowFrag TruthValue,
pwTemplateAugAluNgeKeyGroupIn AluNgeKeygroupIdOrZero,
pwTemplateAugAluNgeKeyGroupOut AluNgeKeygroupIdOrZero,
pwTemplateAugAtLnMacPrtExcList TNamedItemOrEmpty
}
pwTemplateAugLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of pwTemplateAugLastChgd indicates the timestamp of last
change to this row in pwTemplateAugTable."
::= { pwTemplateAugEntry 1 }
pwTemplateAugStpAutoEdge OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the pwTemplateAugStpAutoEdge specifies whether this
pseudo-wire template is enabled for auto-edge detection as defined by
Rapid Spanning Tree Protocol."
DEFVAL { enabled }
::= { pwTemplateAugEntry 2 }
pwTemplateAugStpRapidStart OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the pwTemplateAugStpRapidStart specifies whether Rapid
Start is enabled on this pseudo-wire template.
When the value is 'enabled' the Spanning Tree Protocol state
transitions on this pseudo-wire template are driven by the value of
the 'HelloTime', instead of the value of 'ForwardDelay', thus allowing
a faster transition into the forwarding state."
DEFVAL { disabled }
::= { pwTemplateAugEntry 3 }
pwTemplateAugStpAdminPtToPt OBJECT-TYPE
SYNTAX INTEGER {
forceTrue (0),
forceFalse (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the pwTemplateAugStpAdminPtToPt specifies the
administrative point-to-point status of the LAN segment attached to
this sdp.
A value of 'forceTrue' indicates that this port should always be
treated as if it is connected to a point-to-point link.
A value of 'forceFalse' indicates that this port should be treated as
having a shared media connection."
REFERENCE
"IEEE 802.1w clause 6.4.3, 6.5, 14.8.2"
DEFVAL { forceTrue }
::= { pwTemplateAugEntry 4 }
pwTemplateAugStpPathCost OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the pwTemplateAugStpPathCost specifies the contribution
of this pseudo-wire template to the path cost of paths towards the
spanning tree root which include this pseudo-wire template."
DEFVAL { 10 }
::= { pwTemplateAugEntry 5 }
pwTemplateAugStpPriority OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object pwTemplateAugStpPriority specifies the value
of the port priority field which is contained in the most significant
4 bits of the 16-bit Port ID associated with this pseudo-wire template
. As only the most significant 4 bits of the value are used, the
actual value of this object is limited to multiples of 16: e.g. the
agent rounds down the value to one of: 0, 16, 32, .. , 224, 240."
DEFVAL { 128 }
::= { pwTemplateAugEntry 6 }
pwTemplateAugStpRootGuard OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object pwTemplateAugStpRootGuard specifies whether
this port is allowed to become STP root port. It corresponds to the
parameter 'restrictedRole' in 802.1Q. If set, it can cause lack of
spanning tree connectivity."
DEFVAL { false }
::= { pwTemplateAugEntry 7 }
pwTemplateAugStpAdminStatus OBJECT-TYPE
SYNTAX TmnxEnabledDisabledAdminState
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the object pwTemplateAugStpAdminStatus specifies whether
this pseudo-wire template participates in the Spanning Tree Protocol."
DEFVAL { enabled }
::= { pwTemplateAugEntry 8 }
pwTemplateAugL2ptTermination OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the pwTemplateAugL2ptTermination specifies whether
received L2 Protocol Tunnel packets are terminated on this pseudo-wire
template."
DEFVAL { disabled }
::= { pwTemplateAugEntry 9 }
pwTemplateAugL2ptProtocols OBJECT-TYPE
SYNTAX L2ptProtocols
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the pwTemplateAugL2ptProtocols specifies which L2
Protocol Tunnel PDUs are terminated on this pseudo-wire template."
DEFVAL { {} }
::= { pwTemplateAugEntry 10 }
pwTemplateAugGreAllowFrag OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of pwTemplateAugGreAllowFrag specifies whether to allow GRE
encapsulated packets to be sent without setting the DF bit.
This object is valid only when pwTemplateGreDelivery is set to 'true'."
DEFVAL { false }
::= { pwTemplateAugEntry 11 }
pwTemplateAugAluNgeKeyGroupIn OBJECT-TYPE
SYNTAX AluNgeKeygroupIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pwTemplateAugAluNgeKeyGroupIn specifies keygroup identifier for
the inbound direction."
DEFVAL { 0 }
::= { pwTemplateAugEntry 12 }
pwTemplateAugAluNgeKeyGroupOut OBJECT-TYPE
SYNTAX AluNgeKeygroupIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The pwTemplateAugAluNgeKeyGroupOut specifies keygroup identifier for
the outbound direction."
DEFVAL { 0 }
::= { pwTemplateAugEntry 13 }
pwTemplateAugAtLnMacPrtExcList OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of pwTemplateAugAtLnMacPrtExcList specifies mac-list name
which contains MAC addresses to be excluded from auto learn mac
protect"
DEFVAL { "" }
::= { pwTemplateAugEntry 14 }
sdpSegRouteTableLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpSegRouteTableLastChgd indicates the sysUpTime at the
time of the last modification of sdpSegRouteTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 65 }
sdpSegRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpSegRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains SDP segment routing information."
::= { tmnxSdpObjs 66 }
sdpSegRouteEntry OBJECT-TYPE
SYNTAX SdpSegRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific SDP segment routing."
INDEX { sdpId }
::= { sdpSegRouteTable 1 }
SdpSegRouteEntry ::= SEQUENCE
{
sdpSegRouteIsIs TmnxEnabledDisabled,
sdpSegRouteIsIsOperInstId Integer32,
sdpSegRouteIsIsLspId Unsigned32,
sdpSegRouteOspf TmnxEnabledDisabled,
sdpSegRouteOspfOperInstId Integer32,
sdpSegRouteOspfLspId Unsigned32,
sdpSegRouteTeOperInstId Integer32
}
sdpSegRouteIsIs OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the sdpSegRouteIsIs specifies whether Segment Routing is
enabled for IS-IS on this SDP."
DEFVAL { disabled }
::= { sdpSegRouteEntry 1 }
sdpSegRouteIsIsOperInstId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the sdpSegRouteIsIsOperInstId indicates the IS-IS
instance identifier in use for this SDP.
Value of '-1' indicates no valid value for the instance identifier."
::= { sdpSegRouteEntry 3 }
sdpSegRouteIsIsLspId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpSegRouteIsIsLspId indicates the Id for the segment
routed IS-IS LSP if sdpSegRouteIsIs is set to 'enabled' and there is a
valid route to the sdpFarEndIpAddress."
::= { sdpSegRouteEntry 4 }
sdpSegRouteOspf OBJECT-TYPE
SYNTAX TmnxEnabledDisabled
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of the sdpSegRouteOspf specifies whether Segment Routing is
enabled for OSPF on this SDP."
DEFVAL { disabled }
::= { sdpSegRouteEntry 10 }
sdpSegRouteOspfOperInstId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the sdpSegRouteOspfOperInstId indicates the OSPF instance
identifier in use for this SDP.
Value of '-1' indicates no valid value for the instance identifier."
::= { sdpSegRouteEntry 12 }
sdpSegRouteOspfLspId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpSegRouteOspfLspId indicates the Id for the segment
routed OSPF LSP if sdpSegRouteOspf is set to 'enabled' and there is a
valid route to the sdpFarEndIpAddress."
::= { sdpSegRouteEntry 13 }
sdpSegRouteTeOperInstId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the sdpSegRouteTeOperInstId indicates the traffic
engineering (TE) instance identifier in use for this SDP.
Value of '-1' indicates no valid value for the instance identifier."
::= { sdpSegRouteEntry 14 }
sdpEvpnMHEthSegTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpEvpnMHEthSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The sdpEvpnMHEthSegTable contains entries for ethernet segment
information associated with a SDP binding."
::= { tmnxSdpObjs 67 }
sdpEvpnMHEthSegEntry OBJECT-TYPE
SYNTAX SdpEvpnMHEthSegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An ethernet segment entry in the sdpEvpnMHEthSegTable."
INDEX {
svcId,
sdpBindId
}
::= { sdpEvpnMHEthSegTable 1 }
SdpEvpnMHEthSegEntry ::= SEQUENCE
{
sdpEvpnMHEthSegName TNamedItemOrEmpty,
sdpEvpnMHEthSegStatus TmnxEvpnMHEthSegStatus
}
sdpEvpnMHEthSegName OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpEvpnMHEthSegName indicates the ethernet segment name
associated with the given SDP binding."
::= { sdpEvpnMHEthSegEntry 1 }
sdpEvpnMHEthSegStatus OBJECT-TYPE
SYNTAX TmnxEvpnMHEthSegStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpEvpnMHEthSegStatus indicates the status of the
ethernet segment associated with the given SDP binding."
::= { sdpEvpnMHEthSegEntry 2 }
sdpBindExtTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindExtTableLastChanged indicates the sysUpTime at the
time of the last modification of sdpBindExtTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 68 }
sdpBindExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that extends sdpBindTable."
::= { tmnxSdpObjs 69 }
sdpBindExtEntry OBJECT-TYPE
SYNTAX SdpBindExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"sdpBindExtEntry extends sdpBindEntry."
AUGMENTS { sdpBindEntry }
::= { sdpBindExtTable 1 }
SdpBindExtEntry ::= SEQUENCE
{
sdpBindExtEntropyLabel TruthValue,
sdpBindExtLastMgmtChange TimeStamp,
sdpBindExtBfdFailAction INTEGER,
sdpBindExtBfdSessStatOperState TmnxBfdSessOperState,
sdpBindExtBfdWaitForUpTimer Unsigned32,
sdpBindExtBfdUpTimeRemain Integer32
}
sdpBindExtEntropyLabel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindExtEntropyLabel specifies whether the use of
entropy label is enabled or not on this SDP Bind."
DEFVAL { false }
::= { sdpBindExtEntry 1 }
sdpBindExtLastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the most recent
management-initiated change to this Service-SDP binding."
::= { sdpBindExtEntry 2 }
sdpBindExtBfdFailAction OBJECT-TYPE
SYNTAX INTEGER {
none (0),
down (1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindExtBfdFailAction specifies the action to take on
BFD failure."
DEFVAL { none }
::= { sdpBindExtEntry 3 }
sdpBindExtBfdSessStatOperState OBJECT-TYPE
SYNTAX TmnxBfdSessOperState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindExtBfdSessStatOperState indicates the operational
state of the BFD session the SDP-BIND is relying upon for its fast
triggering mechanism."
::= { sdpBindExtEntry 4 }
sdpBindExtBfdWaitForUpTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of sdpBindExtBfdWaitForUpTimer specifies the up-timer to
wait for on BFD failure."
DEFVAL { 0 }
::= { sdpBindExtEntry 5 }
sdpBindExtBfdUpTimeRemain OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindExtBfdUpTimeRemain indicates the remaining uptime."
::= { sdpBindExtEntry 6 }
sdpSegRouteTeLspTableLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpSegRouteTeLspTableLastChgd indicates the sysUpTime at
the time of the last modification of sdpSegRouteTeLspTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 70 }
sdpSegRouteTeLspTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpSegRouteTeLspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains SDP segment routing traffic engineering (SR-TE)
LSPs used to reach the far-end ESR device.
All the LSPs in this list must terminate at the IP address specified
by sdpFarEndIpAddress or sdpFarEndNodeId (for sdpDelivery of 'mpls').
This object is otherwise insignificant and should contain a value of
0.
When this list has more than one element, the Nokia SROS router will
use ALL of the LSPs for load balancing purposes. Each LSP ID in the
list corresponds to the vRtrMplsLspIndex of the given MPLS LSP."
::= { tmnxSdpObjs 71 }
sdpSegRouteTeLspEntry OBJECT-TYPE
SYNTAX SdpSegRouteTeLspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific SDP segment routing traffic engineering
(SR-TE) LSP."
INDEX {
sdpId,
sdpSegRouteTeLspId
}
::= { sdpSegRouteTeLspTable 1 }
SdpSegRouteTeLspEntry ::= SEQUENCE
{
sdpSegRouteTeLspId TmnxVRtrMplsLspID,
sdpSegRouteTeLspRowStatus RowStatus,
sdpSegRouteTeLspLastChanged TimeStamp
}
sdpSegRouteTeLspId OBJECT-TYPE
SYNTAX TmnxVRtrMplsLspID
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the sdpSegRouteTeLspId specifies LSP identifier
associated with the 'Segment Routing Traffic Engineering' SDP which is
used to reach the far-end ESR device.
This LSP must terminate at the IP address specified by
sdpFarEndIpAddress or sdpFarEndNodeId (for sdpDelivery of 'mpls')."
::= { sdpSegRouteTeLspEntry 1 }
sdpSegRouteTeLspRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the sdpSegRouteTeLspRowStatus specifies the row status of
the entry."
::= { sdpSegRouteTeLspEntry 2 }
sdpSegRouteTeLspLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the most recent change to this
entry."
::= { sdpSegRouteTeLspEntry 3 }
sdpMplsLspTableLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpMplsLspTableLastChgd indicates the sysUpTime at the
time of the last modification of sdpMplsLspTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 72 }
sdpMplsLspTable OBJECT-TYPE
SYNTAX SEQUENCE OF SdpMplsLspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains SDP MPLS LSPs used to reach the far-end ESR
device.
All the LSPs in this list must terminate at the IP address specified
by sdpFarEndIpAddress or sdpFarEndNodeId (for sdpDelivery of 'mpls').
This object is otherwise insignificant and should contain a value of
0.
When this list has more than one element, the Nokia SROS router will
use ALL of the LSPs for load balancing purposes. Each LSP ID in the
list corresponds to the vRtrMplsLspIndex of the given MPLS LSP."
::= { tmnxSdpObjs 73 }
sdpMplsLspEntry OBJECT-TYPE
SYNTAX SdpMplsLspEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a specific SDP MPLS LSP."
INDEX {
sdpId,
sdpMplsLspId
}
::= { sdpMplsLspTable 1 }
SdpMplsLspEntry ::= SEQUENCE
{
sdpMplsLspId TmnxVRtrMplsLspIDNoZero,
sdpMplsLspRowStatus RowStatus,
sdpMplsLspLastChanged TimeStamp
}
sdpMplsLspId OBJECT-TYPE
SYNTAX TmnxVRtrMplsLspIDNoZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the sdpMplsLspId specifies LSP identifier associated with
the MPLS SDP which is used to reach the far-end ESR device.
This LSP must terminate at the IP address specified by
sdpFarEndIpAddress or sdpFarEndNodeId (for sdpDelivery of 'mpls')."
::= { sdpMplsLspEntry 1 }
sdpMplsLspRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the sdpMplsLspRowStatus specifies the row status of the
entry."
::= { sdpMplsLspEntry 2 }
sdpMplsLspLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the most recent change to this
entry."
::= { sdpMplsLspEntry 3 }
sdpBindExt2TableLastChgd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindExt2TableLastChgd indicates the sysUpTime at the
time of the last modification of sdpBindExt2Table.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 74 }
sdpBindExt2Table OBJECT-TYPE
SYNTAX SEQUENCE OF SdpBindExt2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that extends sdpBindTable."
::= { tmnxSdpObjs 75 }
sdpBindExt2Entry OBJECT-TYPE
SYNTAX SdpBindExt2Entry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"sdpBindExt2Entry extends sdpBindEntry."
INDEX {
svcId,
sdpBindId
}
::= { sdpBindExt2Table 1 }
SdpBindExt2Entry ::= SEQUENCE
{
sdpBindExt2LastMgmtChange TimeStamp,
sdpBindExt2AdvSvcMtu Integer32
}
sdpBindExt2LastMgmtChange OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the time of the most recent
management-initiated change to this Service-SDP binding."
::= { sdpBindExt2Entry 1 }
sdpBindExt2AdvSvcMtu OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..9782)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The sdpBindExt2AdvSvcMtu specifies the service-mtu value which
overrides service MTU value for the service."
DEFVAL { -1 }
::= { sdpBindExt2Entry 2 }
sdpBindTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTableLastChanged indicates the sysUpTime at the
time of the most recent change to the sdpBindTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 76 }
sdpBindTlsTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sdpBindTlsTableLastChanged indicates the sysUpTime at the
time of the most recent change to the sdpBindTlsTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSdpObjs 77 }
tmnxSdpNotifyObjs OBJECT IDENTIFIER ::= { tmnxSdpObjs 100 }
sdpNotifySdpId OBJECT-TYPE
SYNTAX SdpId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The ID of the SDP where SDP Bindings are associated. This object is
used by the sdpBindSdpStateChangeProcessed notification to indicate
the SDP that changed state and that resulted in having the associated
sdpBindStatusChanged events suppressed for all SDP Bindings on that
SDP."
::= { tmnxSdpNotifyObjs 1 }
dynamicSdpStatus OBJECT-TYPE
SYNTAX ConfigStatus
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of dynamicSdpStatus indicates the status of the dynamic SDP
which is used by the dynamicSdpConfigChanged and
dynamicSdpBindConfigChanged notifications to indicate what state the
dynamic SDP or SDP Bind has entered: 'created', 'modified', or
'deleted'."
::= { tmnxSdpNotifyObjs 2 }
dynamicSdpOrigin OBJECT-TYPE
SYNTAX TmnxCreateOrigin
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of dynamicSdpOrigin indicates the origin of the dynamic SDP.
The origin indicates the protocol or mechanism that created the
dynamic SDP."
::= { tmnxSdpNotifyObjs 3 }
dynamicSdpCreationError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object dynamicSdpCreationError indicates the reason
why the system was unable to create the dynamic SDP."
::= { tmnxSdpNotifyObjs 4 }
dynamicSdpBindCreationError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object dynamicSdpBindCreationError indicates the
reason why the system was unable to create the dynamic SDP Binding."
::= { tmnxSdpNotifyObjs 5 }
sdpBindNotifyMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object sdpBindNotifyMacAddr indicates the MAC address
associated with a VPLS SDP Binding."
::= { tmnxSdpNotifyObjs 6 }
sdpEgIfNetDomainInconsCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object sdpEgIfNetDomainInconsCount indicates the
number of SDPs which have an inconsistent network-domain for the SDP
and egress network interfaces of the SDP."
::= { tmnxSdpNotifyObjs 7 }
sdpMSPwPeId OBJECT-TYPE
SYNTAX TmnxSpokeSdpIdOrZero
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of the object sdpMSPwPeId specifies the multi-segment
pseudo-wire provider-edge identifier for the service associated with
this notification."
::= { tmnxSdpNotifyObjs 8 }
sdpBindIpipeCeIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of sdpBindIpipeCeIpAddrType indicates the type of CE address
on an IPIPE SDP. The CE IP address is specified by
sdpBindIpipeCeIpAddress."
::= { tmnxSdpNotifyObjs 9 }
sdpBindIpipeCeIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE (0|4|16))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of sdpBindIpipeCeIpAddress indicates the CE IP address of
type sdpBindIpipeCeIpAddrType on an IPIPE SDP."
::= { tmnxSdpNotifyObjs 10 }
sdpPbbActvPwWithNonActvCtrlPw OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of sdpPbbActvPwWithNonActvCtrlPw indicates that the
first pseudo-wire (PW) with sdpBindUseSdpBMac set to 'true' becomes
active on the Backbone Edge Bridge (BEB) where the control PW is
standby or down on that SDP.
Value of 'false' for sdpPbbActvPwWithNonActvCtrlPw indicates that the
last PW with sdpBindUseSdpBMac set to 'true' becomes standby or down
on the BEB where control PW is standby or down on that SDP."
::= { tmnxSdpNotifyObjs 11 }
tmnxSdpConformance OBJECT IDENTIFIER ::= { tmnxServConformance 4 }
tmnxSdpCompliances OBJECT IDENTIFIER ::= { tmnxSdpConformance 1 }
tmnxSdp77x0V6v1Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7750
SR and 7710 SR series systems."
MODULE
MANDATORY-GROUPS {
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpApipeV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindIpipeV6v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV6v1Group,
tmnxSdpBindTlsMrpV6v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindCpipeV6v0Group
}
::= { tmnxSdpCompliances 10 }
tmnxSdp7450V6v1Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7450
ESS series systems."
MODULE
MANDATORY-GROUPS {
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindIpipeV6v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV6v1Group,
tmnxSdpBindTlsMrpV6v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group
}
::= { tmnxSdpCompliances 11 }
tmnxSdp77x0V7v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7750
SR and 7710 SR series systems."
MODULE
MANDATORY-GROUPS {
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpApipeV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV6v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindCpipeV6v0Group,
tmnxSdpBindIpipeV7v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpBindGenGroup
}
::= { tmnxSdpCompliances 12 }
tmnxSdp7450V7v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7450
ESS series systems."
MODULE
MANDATORY-GROUPS {
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV6v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindIpipeV7v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpBindGenGroup
}
::= { tmnxSdpCompliances 13 }
tmnxSdp77x0V8v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7750
SR and 7710 SR series systems."
MODULE
MANDATORY-GROUPS {
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpApipeV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindCpipeV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpBindGenGroup,
tmnxSdpLdpBackupV8v0Group,
tmnxSdpV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindCpmProtGroup
}
::= { tmnxSdpCompliances 14 }
tmnxSdp7450V8v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7450
ESS series systems."
MODULE
MANDATORY-GROUPS {
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpBindGenGroup,
tmnxSdpLdpBackupV8v0Group,
tmnxSdpV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindCpmProtGroup
}
::= { tmnxSdpCompliances 15 }
tmnxSdp77x0V9v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7750
SR and 7710 SR series systems release R9.0."
MODULE
MANDATORY-GROUPS {
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpApipeV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindCpipeV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpBindGenGroup,
tmnxSdpV8v0Group,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup
}
::= { tmnxSdpCompliances 16 }
tmnxSdp7450V9v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7450
ESS series systems release R9.0."
MODULE
MANDATORY-GROUPS {
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpBindGenGroup,
tmnxSdpV8v0Group,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup
}
::= { tmnxSdpCompliances 17 }
tmnxSdp77x0V10v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7750
SR and 7710 SR series systems release R9.0."
MODULE
MANDATORY-GROUPS {
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpApipeV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindCpipeV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpBindGenGroup,
tmnxSdpV8v0Group,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpBindBsxV10v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup,
tmnxSdpPwPortGroup,
tmnxSdpSpbGroup,
tmnxSdpNotifyV10v0Group,
tmnxSdpBindBlockOnPeerFaultGroup,
tmnxSdpV10v0Group
}
::= { tmnxSdpCompliances 18 }
tmnxSdp7450V10v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7450
ESS series systems release R9.0."
MODULE
MANDATORY-GROUPS {
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpBindGenGroup,
tmnxSdpV8v0Group,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpBindBsxV10v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup,
tmnxSdpPwPortGroup,
tmnxSdpSpbGroup,
tmnxSdpNotifyV10v0Group,
tmnxSdpV10v0Group,
tmnxSdpBindBlockOnPeerFaultGroup,
tmnxSdpBindQGrpObjsV10v0Group
}
::= { tmnxSdpCompliances 19 }
tmnxSdp77x0V11v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7750
SR and 7710 SR series systems release R11.0."
MODULE
MANDATORY-GROUPS {
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpApipeV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindDhcpV11v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindCpipeV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpBindGenGroup,
tmnxSdpV8v0Group,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpBindBsxV10v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup,
tmnxSdpPwPortV11v0Group,
tmnxSdpSpbGroup,
tmnxSdpNotifyV10v0Group,
tmnxSdpV10v0Group,
tmnxSdpNotifyV11v0Group,
tmnxSdpGrpGroup,
tmnxSdpBindBlockOnPeerFaultGroup,
tmnxSdpBindPwPortGroup,
tmnxSdpBindCtrlChanGroup,
tmnxSdpVllBgpV11v0Group,
tmnxSdpBindSpbV11v0Group,
tmnxSdpBindFlowSpecGroup,
tmnxSdpPwSecShaperGroup,
tmnxSdpBindEthLoopbackV11v0Group,
tmnxSdpBindEthLpbkNtfyV11v0Group,
sdpBindTlsFdbMacStatsGroup,
tmnxSdpBindCtrlChanReqGroup,
tmnxSdpBindCtrlChanAckGroup
}
::= { tmnxSdpCompliances 20 }
tmnxSdp7450V11v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7450
ESS series systems release R11.0."
MODULE
MANDATORY-GROUPS {
tmnxSdpV6v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindDhcpV11v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpBindGenGroup,
tmnxSdpV8v0Group,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpBindBsxV10v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup,
tmnxSdpPwPortV11v0Group,
tmnxSdpSpbGroup,
tmnxSdpNotifyV10v0Group,
tmnxSdpV10v0Group,
tmnxSdpNotifyV11v0Group,
tmnxSdpBindQGrpObjsV10v0Group,
tmnxSdpGrpGroup,
tmnxSdpBindBlockOnPeerFaultGroup,
tmnxSdpBindPwPortGroup,
tmnxSdpBindCtrlChanGroup,
tmnxSdpVllBgpV11v0Group,
tmnxSdpL2tpv3Group,
tmnxSdpBindSpbV11v0Group,
tmnxSdpBindFlowSpecGroup,
tmnxSdpPwSecShaperGroup,
tmnxSdpBindEthLoopbackV11v0Group,
tmnxSdpBindEthLpbkNtfyV11v0Group,
sdpBindTlsFdbMacStatsGroup,
tmnxSdpBindCtrlChanReqGroup,
tmnxSdpBindCtrlChanAckGroup
}
::= { tmnxSdpCompliances 21 }
tmnxSdp77x0V12v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7750
SR and 7710 SR series systems release R12.0."
MODULE
MANDATORY-GROUPS {
tmnxSdpV12v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpApipeV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindDhcpV11v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindCpipeV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpPbbV12v0Group,
tmnxSdpBindGenGroup,
tmnxSdpV8v0Group,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpBindBsxV10v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup,
tmnxSdpPwPortV11v0Group,
tmnxSdpSpbGroup,
tmnxSdpNotifyV10v0Group,
tmnxSdpV10v0Group,
tmnxSdpNotifyV11v0Group,
tmnxSdpGrpGroup,
tmnxSdpBindBlockOnPeerFaultGroup,
tmnxSdpBindPwPortGroup,
tmnxSdpBindCtrlChanGroup,
tmnxSdpVllBgpV11v0Group,
tmnxSdpBindSpbV11v0Group,
tmnxSdpBindFlowSpecGroup,
tmnxSdpPwSecShaperGroup,
tmnxSdpBindEthLoopbackV11v0Group,
tmnxSdpBindEthLpbkNtfyV11v0Group,
sdpBindTlsFdbMacStatsGroup,
sdpBindTlsEtreeGroup,
tmnxSdpBindCpmProtV12v0Group,
tmnxSdpBindCtrlChanReqGroup,
tmnxSdpBindV11v0Group,
tmnxSdpBindCtrlChanAckGroup,
tmnxSdpPBBEpipePWRedV12v0Group,
tmnxSdpPbbEpipeNotifyObjsGroup,
tmnxSdpPbbEpipeNotifV12v0Group,
tmnxSdpBindEthCfmV12v0Group,
tmnxSdpBfdV12v0Group,
tmnxSdpL2tpv3CookieGroup,
tmnxSdpPwTempBindV12v0Group,
tmnxSdpPwLoopbackGroup,
tmnxPwTemplateAugGroup,
tmnxSdpCtrlPwNotifV12v0Group
}
::= { tmnxSdpCompliances 22 }
tmnxSdp7450V12v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7450
ESS series systems release R12.0."
MODULE
MANDATORY-GROUPS {
tmnxSdpV12v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindDhcpV11v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpPbbV12v0Group,
tmnxSdpBindGenGroup,
tmnxSdpV8v0Group,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpBindBsxV10v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup,
tmnxSdpPwPortV11v0Group,
tmnxSdpSpbGroup,
tmnxSdpNotifyV10v0Group,
tmnxSdpV10v0Group,
tmnxSdpNotifyV11v0Group,
tmnxSdpBindQGrpObjsV10v0Group,
tmnxSdpGrpGroup,
tmnxSdpBindBlockOnPeerFaultGroup,
tmnxSdpBindPwPortGroup,
tmnxSdpBindCtrlChanGroup,
tmnxSdpVllBgpV11v0Group,
tmnxSdpL2tpv3Group,
tmnxSdpBindSpbV11v0Group,
tmnxSdpBindFlowSpecGroup,
tmnxSdpPwSecShaperGroup,
tmnxSdpBindEthLoopbackV11v0Group,
tmnxSdpBindEthLpbkNtfyV11v0Group,
sdpBindTlsFdbMacStatsGroup,
sdpBindTlsEtreeGroup,
tmnxSdpBindCpmProtV12v0Group,
tmnxSdpBindCtrlChanReqGroup,
tmnxSdpBindCtrlChanAckGroup,
tmnxSdpBindV11v0Group,
tmnxSdpPBBEpipePWRedV12v0Group,
tmnxSdpPbbEpipeNotifyObjsGroup,
tmnxSdpPbbEpipeNotifV12v0Group,
tmnxSdpL2tpv3CookieGroup,
tmnxSdpPwTempBindV12v0Group,
tmnxSdpPwLoopbackGroup,
tmnxPwTemplateAugGroup,
tmnxSdpCtrlPwNotifV12v0Group
}
::= { tmnxSdpCompliances 23 }
tmnxSdp77x0V13v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7750
SR and 7710 SR series systems release R13.0."
MODULE
MANDATORY-GROUPS {
tmnxSdpV13v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpApipeV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindDhcpV11v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindCpipeV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpPbbV12v0Group,
tmnxSdpBindGenGroup,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpBindBsxV10v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup,
tmnxSdpPwPortV11v0Group,
tmnxSdpSpbGroup,
tmnxSdpNotifyV10v0Group,
tmnxSdpV10v0Group,
tmnxSdpNotifyV11v0Group,
tmnxSdpGrpGroup,
tmnxSdpBindBlockOnPeerFaultGroup,
tmnxSdpBindPwPortGroup,
tmnxSdpBindCtrlChanGroup,
tmnxSdpVllBgpV11v0Group,
tmnxSdpBindSpbV11v0Group,
tmnxSdpBindFlowSpecGroup,
tmnxSdpPwSecShaperGroup,
tmnxSdpBindEthLoopbackV11v0Group,
tmnxSdpBindEthLpbkNtfyV11v0Group,
sdpBindTlsFdbMacStatsGroup,
sdpBindTlsEtreeGroup,
tmnxSdpBindCpmProtV12v0Group,
tmnxSdpBindCtrlChanReqGroup,
tmnxSdpBindV11v0Group,
tmnxSdpBindCtrlChanAckGroup,
tmnxSdpPBBEpipePWRedV12v0Group,
tmnxSdpPbbEpipeNotifyObjsGroup,
tmnxSdpPbbEpipeNotifV12v0Group,
tmnxSdpBindEthCfmV12v0Group,
tmnxSdpBfdV12v0Group,
tmnxSdpL2tpv3CookieGroup,
tmnxSdpPwTempBindV12v0Group,
tmnxSdpPwLoopbackGroup,
tmnxPwTemplateAugGroup,
tmnxSdpCtrlPwNotifV12v0Group,
tmnxSdpLdpIpv6Group,
tmnxSdpBindV13v0Group,
tmnxSdpSegRouteGroup,
tmnxSdpBindDhcpV13v0Group,
sdpBgpEvpnMplsMhGroup
}
::= { tmnxSdpCompliances 24 }
tmnxSdp7450V13v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7450
ESS series systems release R13.0."
MODULE
MANDATORY-GROUPS {
tmnxSdpV13v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindDhcpV11v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpPbbV12v0Group,
tmnxSdpBindGenGroup,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpBindBsxV10v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup,
tmnxSdpPwPortV11v0Group,
tmnxSdpSpbGroup,
tmnxSdpNotifyV10v0Group,
tmnxSdpV10v0Group,
tmnxSdpNotifyV11v0Group,
tmnxSdpBindQGrpObjsV10v0Group,
tmnxSdpGrpGroup,
tmnxSdpBindBlockOnPeerFaultGroup,
tmnxSdpBindPwPortGroup,
tmnxSdpBindCtrlChanGroup,
tmnxSdpVllBgpV11v0Group,
tmnxSdpL2tpv3Group,
tmnxSdpBindSpbV11v0Group,
tmnxSdpBindFlowSpecGroup,
tmnxSdpPwSecShaperGroup,
tmnxSdpBindEthLoopbackV11v0Group,
tmnxSdpBindEthLpbkNtfyV11v0Group,
sdpBindTlsFdbMacStatsGroup,
sdpBindTlsEtreeGroup,
tmnxSdpBindCpmProtV12v0Group,
tmnxSdpBindCtrlChanReqGroup,
tmnxSdpBindCtrlChanAckGroup,
tmnxSdpBindV11v0Group,
tmnxSdpPBBEpipePWRedV12v0Group,
tmnxSdpPbbEpipeNotifyObjsGroup,
tmnxSdpPbbEpipeNotifV12v0Group,
tmnxSdpL2tpv3CookieGroup,
tmnxSdpPwTempBindV12v0Group,
tmnxSdpPwLoopbackGroup,
tmnxPwTemplateAugGroup,
tmnxSdpCtrlPwNotifV12v0Group,
tmnxSdpLdpIpv6Group,
tmnxSdpBindV13v0Group,
tmnxSdpSegRouteGroup,
tmnxSdpPwPortOperGrpGroup,
tmnxSdpBindDhcpV13v0Group,
sdpBgpEvpnMplsMhGroup,
sdpGreExtGroup
}
::= { tmnxSdpCompliances 25 }
tmnxSdp7750V14v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7750
ESS series systems release R14.0."
MODULE
MANDATORY-GROUPS {
svcPwTmplExt14v0Group,
tmnxSdpBindV14v0Group,
tmnxSdpV13v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpApipeV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindDhcpV11v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindCpipeV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpPbbV12v0Group,
tmnxSdpBindGenGroup,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpBindBsxV10v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup,
tmnxSdpPwPortV11v0Group,
tmnxSdpSpbGroup,
tmnxSdpNotifyV10v0Group,
tmnxSdpV10v0Group,
tmnxSdpNotifyV11v0Group,
tmnxSdpGrpGroup,
tmnxSdpBindBlockOnPeerFaultGroup,
tmnxSdpBindPwPortGroup,
tmnxSdpBindCtrlChanGroup,
tmnxSdpVllBgpV11v0Group,
tmnxSdpBindSpbV11v0Group,
tmnxSdpBindFlowSpecGroup,
tmnxSdpPwSecShaperGroup,
tmnxSdpBindEthLoopbackV11v0Group,
tmnxSdpBindEthLpbkNtfyV11v0Group,
sdpBindTlsFdbMacStatsGroup,
sdpBindTlsEtreeGroup,
tmnxSdpBindCpmProtV12v0Group,
tmnxSdpBindCtrlChanReqGroup,
tmnxSdpBindV11v0Group,
tmnxSdpBindCtrlChanAckGroup,
tmnxSdpPBBEpipePWRedV12v0Group,
tmnxSdpPbbEpipeNotifyObjsGroup,
tmnxSdpPbbEpipeNotifV12v0Group,
tmnxSdpBindEthCfmV12v0Group,
tmnxSdpBfdV12v0Group,
tmnxSdpL2tpv3CookieGroup,
tmnxSdpPwTempBindV12v0Group,
tmnxSdpPwLoopbackGroup,
tmnxPwTemplateAugGroup,
tmnxSdpCtrlPwNotifV12v0Group,
tmnxSdpLdpIpv6Group,
tmnxSdpSegRouteGroup,
tmnxSdpBindDhcpV13v0Group,
sdpBgpEvpnMplsMhGroup,
sdpPwStaticLabelGroup,
sdpBindV14v0Group,
sdpFpeV14v0Group,
sdpBindBgpEvpnAlmpGroup
}
::= { tmnxSdpCompliances 26 }
tmnxSdp7450V14v0Compliance MODULE-COMPLIANCE
STATUS obsolete
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7450
ESS series systems release R14.0."
MODULE
MANDATORY-GROUPS {
svcPwTmplExt14v0Group,
tmnxSdpBindV14v0Group,
tmnxSdpSegRouteTeGroup,
tmnxSdpV13v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindDhcpV11v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpPbbV12v0Group,
tmnxSdpBindGenGroup,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpBindBsxV10v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup,
tmnxSdpPwPortV11v0Group,
tmnxSdpSpbGroup,
tmnxSdpNotifyV10v0Group,
tmnxSdpV10v0Group,
tmnxSdpNotifyV11v0Group,
tmnxSdpBindQGrpObjsV10v0Group,
tmnxSdpGrpGroup,
tmnxSdpBindBlockOnPeerFaultGroup,
tmnxSdpBindPwPortGroup,
tmnxSdpBindCtrlChanGroup,
tmnxSdpVllBgpV11v0Group,
tmnxSdpL2tpv3Group,
tmnxSdpBindSpbV11v0Group,
tmnxSdpBindFlowSpecGroup,
tmnxSdpPwSecShaperGroup,
tmnxSdpBindEthLoopbackV11v0Group,
tmnxSdpBindEthLpbkNtfyV11v0Group,
sdpBindTlsFdbMacStatsGroup,
sdpBindTlsEtreeGroup,
tmnxSdpBindCpmProtV12v0Group,
tmnxSdpBindCtrlChanReqGroup,
tmnxSdpBindCtrlChanAckGroup,
tmnxSdpBindV11v0Group,
tmnxSdpPBBEpipePWRedV12v0Group,
tmnxSdpPbbEpipeNotifyObjsGroup,
tmnxSdpPbbEpipeNotifV12v0Group,
tmnxSdpL2tpv3CookieGroup,
tmnxSdpPwTempBindV12v0Group,
tmnxSdpPwLoopbackGroup,
tmnxPwTemplateAugGroup,
tmnxSdpCtrlPwNotifV12v0Group,
tmnxSdpLdpIpv6Group,
tmnxSdpSegRouteGroup,
tmnxSdpPwPortOperGrpGroup,
tmnxSdpBindDhcpV13v0Group,
sdpBgpEvpnMplsMhGroup,
sdpGreExtGroup,
sdpPwStaticLabelGroup,
sdpBindV14v0Group,
sdpBindTlsV14v0Group,
sdpFpeV14v0Group,
sdpBindBgpEvpnAlmpGroup
}
::= { tmnxSdpCompliances 27 }
tmnxSdp7750V15v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7750
SROS series systems release 15.0."
MODULE
MANDATORY-GROUPS {
tmnxSdpMplsLspGroup,
tmnxSdpCfmLmmPerQosV15v0Group,
svcPwTmplExt14v0Group,
tmnxSdpBindV14v0Group,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpApipeV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindDhcpV11v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindCpipeV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpPbbV12v0Group,
tmnxSdpBindGenGroup,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpBindBsxV10v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup,
tmnxSdpPwPortV11v0Group,
tmnxSdpSpbGroup,
tmnxSdpNotifyV10v0Group,
tmnxSdpV10v0Group,
tmnxSdpNotifyV11v0Group,
tmnxSdpGrpGroup,
tmnxSdpBindBlockOnPeerFaultGroup,
tmnxSdpBindPwPortGroup,
tmnxSdpBindCtrlChanGroup,
tmnxSdpVllBgpV11v0Group,
tmnxSdpBindSpbV11v0Group,
tmnxSdpBindFlowSpecGroup,
tmnxSdpPwSecShaperGroup,
tmnxSdpBindEthLoopbackV11v0Group,
tmnxSdpBindEthLpbkNtfyV11v0Group,
sdpBindTlsFdbMacStatsGroup,
sdpBindTlsEtreeGroup,
tmnxSdpBindCpmProtV12v0Group,
tmnxSdpBindCtrlChanReqGroup,
tmnxSdpBindCtrlChanAckGroup,
tmnxSdpPBBEpipePWRedV12v0Group,
tmnxSdpPbbEpipeNotifyObjsGroup,
tmnxSdpPbbEpipeNotifV12v0Group,
tmnxSdpBindEthCfmV12v0Group,
tmnxSdpBfdV12v0Group,
tmnxSdpL2tpv3CookieGroup,
tmnxSdpPwTempBindV12v0Group,
tmnxSdpPwLoopbackGroup,
tmnxPwTemplateAugGroup,
tmnxSdpCtrlPwNotifV12v0Group,
tmnxSdpLdpIpv6Group,
tmnxSdpSegRouteGroup,
tmnxSdpBindDhcpV13v0Group,
sdpBgpEvpnMplsMhGroup,
sdpPwStaticLabelGroup,
sdpBindV14v0Group,
sdpFpeV14v0Group,
sdpBindBgpEvpnAlmpGroup,
tmnxSdpV15v0Group,
tmnxSdpWeightedLoadBalanceGroup,
sdpEvpnMhEthSegV15v0Group,
tmnxPwTempNameV15v0Group,
sdpOperTunnelFarEndGroup
}
::= { tmnxSdpCompliances 28 }
tmnxSdp7450V15v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7450
ESS series systems release 15.0."
MODULE
MANDATORY-GROUPS {
tmnxSdpMplsLspGroup,
tmnxSdpCfmLmmPerQosV15v0Group,
svcPwTmplExt14v0Group,
tmnxSdpBindV14v0Group,
tmnxSdpSegRouteTeGroup,
tmnxSdpBindV6v0Group,
tmnxSdpBindTlsV6v0Group,
tmnxSdpBindTlsV8v0Group,
tmnxSdpBindMeshV6v0Group,
tmnxSdpBindDhcpV6v0Group,
tmnxSdpBindDhcpV11v0Group,
tmnxSdpBindTlsL2ptV6v0Group,
tmnxSdpAutoBindV7v0Group,
tmnxSdpBindTlsMrpV8v0Group,
tmnxSdpTlsBgpV6v0Group,
tmnxSdpNotifyV6v0Group,
tmnxSdpL2V6v0Group,
tmnxSdpFCV6v0Group,
tmnxSdpBindIpipeV8v0Group,
tmnxSdpL2V7v0Group,
tmnxSdpEvalPwTempV7v0Group,
tmnxSdpPbbGroup,
tmnxSdpPbbV12v0Group,
tmnxSdpBindGenGroup,
tmnxSdpBindV9v0Group,
tmnxSdpBindBsxV9v0Group,
tmnxSdpBindBsxV10v0Group,
tmnxSdpNotifyV8v0Group,
tmnxSdpAutoBindV8v0Group,
tmnxSdpBgpVplsV8v0Group,
tmnxSdpL2V8v0Group,
tmnxSdpPwV8v0Group,
tmnxSdpBindV8v0Group,
tmnxSdpV9v0Group,
tmnxSdpBindCpmProtGroup,
tmnxSdpMixedLspModeV9v0Group,
tmnxSdpBindEthCfmGroup,
tmnxSdpBindIpipeNotifyGroup,
tmnxSdpPwPortV11v0Group,
tmnxSdpSpbGroup,
tmnxSdpNotifyV10v0Group,
tmnxSdpV10v0Group,
tmnxSdpNotifyV11v0Group,
tmnxSdpBindQGrpObjsV10v0Group,
tmnxSdpGrpGroup,
tmnxSdpBindBlockOnPeerFaultGroup,
tmnxSdpBindPwPortGroup,
tmnxSdpBindCtrlChanGroup,
tmnxSdpVllBgpV11v0Group,
tmnxSdpL2tpv3Group,
tmnxSdpBindSpbV11v0Group,
tmnxSdpBindFlowSpecGroup,
tmnxSdpPwSecShaperGroup,
tmnxSdpBindEthLoopbackV11v0Group,
tmnxSdpBindEthLpbkNtfyV11v0Group,
sdpBindTlsFdbMacStatsGroup,
sdpBindTlsEtreeGroup,
tmnxSdpBindCpmProtV12v0Group,
tmnxSdpBindCtrlChanReqGroup,
tmnxSdpBindCtrlChanAckGroup,
tmnxSdpPBBEpipePWRedV12v0Group,
tmnxSdpPbbEpipeNotifyObjsGroup,
tmnxSdpPbbEpipeNotifV12v0Group,
tmnxSdpL2tpv3CookieGroup,
tmnxSdpPwTempBindV12v0Group,
tmnxSdpPwLoopbackGroup,
tmnxPwTemplateAugGroup,
tmnxSdpCtrlPwNotifV12v0Group,
tmnxSdpLdpIpv6Group,
tmnxSdpSegRouteGroup,
tmnxSdpPwPortOperGrpGroup,
tmnxSdpBindDhcpV13v0Group,
sdpBgpEvpnMplsMhGroup,
sdpGreExtGroup,
sdpPwStaticLabelGroup,
sdpBindV14v0Group,
sdpBindTlsV14v0Group,
sdpFpeV14v0Group,
sdpBindBgpEvpnAlmpGroup,
tmnxSdpV15v0Group,
tmnxPwTempNameV15v0Group,
sdpOperTunnelFarEndGroup
}
::= { tmnxSdpCompliances 29 }
tmnxSdp7750V16v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7750
SROS series systems release 16.0."
MODULE
MANDATORY-GROUPS {
pwTemplateGreGroup,
pwTemplateQosV16v0Group,
pwTemplateFilterNameV16v0Group,
tmnxSdpBindQinqV16v0Group
}
::= { tmnxSdpCompliances 30 }
tmnxSdp7450V16v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia 7450
SROS series systems release 16.0."
MODULE
MANDATORY-GROUPS {
pwTemplateGreGroup,
pwTemplateQosV16v0Group,
pwTemplateFilterNameV16v0Group,
tmnxSdpBindQinqV16v0Group,
sdpBindSvcMtuGroup
}
::= { tmnxSdpCompliances 31 }
tmnxSdpV19v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia SROS
series systems release 19.0"
MODULE
MANDATORY-GROUPS {
sdpPwPortControlWordGroup,
pwTemplateNgeAutoBindGroup,
sdpBindMcastSrcV19v0Group
}
::= { tmnxSdpCompliances 32 }
tmnxSdpV20v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia SROS
series systems release 20.0"
MODULE
MANDATORY-GROUPS {
sdpNotifyV20v0Group,
sdpBindTlsMacListV20v0Group
}
::= { tmnxSdpCompliances 33 }
tmnxSdpV21v0Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for management of services SDPs on Nokia SROS
series systems release 21.0"
MODULE
MANDATORY-GROUPS {
sdpBindCfmSquelchInCtagGroup,
sdpBindVccvBfdGroup,
sdpPwPortEntropyGroup,
sdpLastChangeV21v0Group,
sdpPwPortSvcMtuV21v0Group
}
::= { tmnxSdpCompliances 34 }
tmnxSdpGroups OBJECT IDENTIFIER ::= { tmnxSdpConformance 2 }
tmnxSdpV6v0Group OBJECT-GROUP
OBJECTS {
sdpNumEntries,
sdpNextFreeId,
sdpId,
sdpRowStatus,
sdpDelivery,
sdpFarEndIpAddress,
sdpLspList,
sdpDescription,
sdpLabelSignaling,
sdpAdminStatus,
sdpOperStatus,
sdpOperPathMtu,
sdpKeepAliveAdminStatus,
sdpKeepAliveOperStatus,
sdpKeepAliveHelloTime,
sdpKeepAliveMaxDropCount,
sdpKeepAliveHoldDownTime,
sdpLastMgmtChange,
sdpKeepAliveNumHelloRequestMessages,
sdpKeepAliveNumHelloResponseMessages,
sdpKeepAliveNumLateHelloResponseMessages,
sdpKeepAliveHelloRequestTimeout,
sdpLdpEnabled,
sdpVlanVcEtype,
sdpAdvertisedVllMtuOverride,
sdpOperFlags,
sdpLastStatusChange,
sdpMvplsMgmtService,
sdpMvplsMgmtSdpBndId,
sdpCollectAcctStats,
sdpAccountingPolicyId,
sdpClassFwdingEnabled,
sdpClassFwdingDefaultLsp,
sdpClassFwdingMcLsp,
sdpMetric,
sdpAutoSdp,
sdpSnmpAllowed,
sdpPBBEtype,
sdpBandwidthBookingFactor,
sdpOperBandwidth,
sdpAvailableBandwidth,
sdpAdminPathMtu,
sdpKeepAliveHelloMessageLength
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting SDP base feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 100 }
tmnxSdpBindV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindId,
sdpBindRowStatus,
sdpBindAdminStatus,
sdpBindOperStatus,
sdpBindLastMgmtChange,
sdpBindType,
sdpBindIngressMacFilterId,
sdpBindIngressIpFilterId,
sdpBindEgressMacFilterId,
sdpBindEgressIpFilterId,
sdpBindVpnId,
sdpBindCustId,
sdpBindVcType,
sdpBindVlanVcTag,
sdpBindSplitHorizonGrp,
sdpBindOperFlags,
sdpBindLastStatusChange,
sdpBindIesIfIndex,
sdpBindMacPinning,
sdpBindIngressIpv6FilterId,
sdpBindEgressIpv6FilterId,
sdpBindCollectAcctStats,
sdpBindAccountingPolicyId,
sdpBindPwPeerStatusBits,
sdpBindPeerVccvCvBits,
sdpBindPeerVccvCcBits,
sdpBindControlWordBit,
sdpBindOperControlWord,
sdpBindEndPoint,
sdpBindEndPointPrecedence,
sdpBindIsICB,
sdpBindPwFaultInetAddressType,
sdpBindClassFwdingOperState,
sdpBindForceVlanVcForwarding,
sdpBindAdminBandwidth,
sdpBindOperBandwidth,
sdpBindBaseStatsIngressForwardedPackets,
sdpBindBaseStatsIngressDroppedPackets,
sdpBindBaseStatsEgressForwardedPackets,
sdpBindBaseStatsEgressForwardedOctets,
sdpBindBaseStatsCustId,
sdpBindBaseStatsIngFwdOctets,
sdpBindBaseStatsIngDropOctets,
sdpBindAdminIngressLabel,
sdpBindAdminEgressLabel,
sdpBindOperIngressLabel,
sdpBindOperEgressLabel,
sdpBindPwFaultInetAddress
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 101 }
tmnxSdpBindTlsV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindTlsStpAdminStatus,
sdpBindTlsStpPriority,
sdpBindTlsStpPortNum,
sdpBindTlsStpPathCost,
sdpBindTlsStpRapidStart,
sdpBindTlsStpBpduEncap,
sdpBindTlsStpPortState,
sdpBindTlsStpDesignatedBridge,
sdpBindTlsStpDesignatedPort,
sdpBindTlsStpForwardTransitions,
sdpBindTlsStpInConfigBpdus,
sdpBindTlsStpInTcnBpdus,
sdpBindTlsStpInBadBpdus,
sdpBindTlsStpOutConfigBpdus,
sdpBindTlsStpOutTcnBpdus,
sdpBindTlsStpOperBpduEncap,
sdpBindTlsStpVpnId,
sdpBindTlsStpCustId,
sdpBindTlsMacAddressLimit,
sdpBindTlsNumMacAddresses,
sdpBindTlsNumStaticMacAddresses,
sdpBindTlsMacLearning,
sdpBindTlsMacAgeing,
sdpBindTlsStpOperEdge,
sdpBindTlsStpAdminPointToPoint,
sdpBindTlsStpPortRole,
sdpBindTlsStpAutoEdge,
sdpBindTlsStpOperProtocol,
sdpBindTlsStpInRstBpdus,
sdpBindTlsStpOutRstBpdus,
sdpBindTlsLimitMacMove,
sdpBindTlsDiscardUnknownSource,
sdpBindTlsMvplsPruneState,
sdpBindTlsMvplsMgmtService,
sdpBindTlsMvplsMgmtSdpBndId,
sdpBindTlsStpException,
sdpBindTlsL2ptTermination,
sdpBindTlsBpduTranslation,
sdpBindTlsStpRootGuard,
sdpBindTlsStpInMstBpdus,
sdpBindTlsStpOutMstBpdus,
sdpBindTlsStpRxdDesigBridge,
sdpBindTlsMacMoveNextUpTime,
sdpBindTlsMacMoveRateExcdLeft,
sdpBindTlsLimitMacMoveLevel,
sdpBindTlsBpduTransOper,
sdpBindTlsL2ptProtocols,
sdpBindTlsIgnoreStandbySig,
sdpBindTlsBlockOnMeshFail
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind TLS feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 102 }
tmnxSdpBindMeshV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindMeshTlsPortState,
sdpBindMeshTlsNotInMstRegion,
sdpBindMeshTlsHoldDownTimer,
sdpBindMeshTlsTransitionState
}
STATUS current
DESCRIPTION
"The group of objects supporting mesh SDP bind feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 103 }
tmnxSdpApipeV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindApipeAdminConcatCellCount,
sdpBindApipeSigConcatCellCount,
sdpBindApipeOperConcatCellCount,
sdpBindApipeConcatMaxDelay,
sdpBindApipeConcatCellClp,
sdpBindApipeConcatCellAal5Fr
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP APipe feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 104 }
tmnxSdpBindDhcpV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindDhcpDescription,
sdpBindDhcpSnoop,
sdpBindDhcpStatsClntSnoopdPckts,
sdpBindDhcpStatsSrvrSnoopdPckts,
sdpBindDhcpStatsClntForwdPckts,
sdpBindDhcpStatsSrvrForwdPckts,
sdpBindDhcpStatsClntDropdPckts,
sdpBindDhcpStatsSrvrDropdPckts,
sdpBindDhcpStatsClntProxRadPckts,
sdpBindDhcpStatsClntProxLSPckts,
sdpBindDhcpStatsGenReleasePckts,
sdpBindDhcpStatsGenForceRenPckts
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind DHCP feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 105 }
tmnxSdpBindIpipeV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindIpipeCeInetAddressType,
sdpBindIpipeCeInetAddress
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting SDP Bind Ipipe Service
on Nokia SROS series systems."
::= { tmnxSdpGroups 106 }
tmnxSdpFCV6v0Group OBJECT-GROUP
OBJECTS {
sdpFCMappingRowStatus,
sdpFCMappingLspId
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP FC feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 107 }
tmnxSdpBindCpipeV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindCpipeLocalPayloadSize,
sdpBindCpipePeerPayloadSize,
sdpBindCpipeLocalBitrate,
sdpBindCpipePeerBitrate,
sdpBindCpipeLocalSigPkts,
sdpBindCpipePeerSigPkts,
sdpBindCpipeLocalCasTrunkFraming,
sdpBindCpipePeerCasTrunkFraming,
sdpBindCpipeLocalUseRtpHeader,
sdpBindCpipePeerUseRtpHeader,
sdpBindCpipeLocalDifferential,
sdpBindCpipePeerDifferential,
sdpBindCpipeLocalTimestampFreq,
sdpBindCpipePeerTimestampFreq
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP bind CPipe feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 108 }
tmnxSdpBindTlsL2ptV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindTlsMfibMdaRowStatus,
sdpBindTlsL2ptStatsLastClearedTime,
sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapStpConfigBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapStpRstBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapStpTcnBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapPvstConfigBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapPvstRstBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapPvstTcnBpdusTx,
sdpBindTlsL2ptStatsStpConfigBpdusRx,
sdpBindTlsL2ptStatsStpConfigBpdusTx,
sdpBindTlsL2ptStatsStpRstBpdusRx,
sdpBindTlsL2ptStatsStpRstBpdusTx,
sdpBindTlsL2ptStatsStpTcnBpdusRx,
sdpBindTlsL2ptStatsStpTcnBpdusTx,
sdpBindTlsL2ptStatsPvstConfigBpdusRx,
sdpBindTlsL2ptStatsPvstConfigBpdusTx,
sdpBindTlsL2ptStatsPvstRstBpdusRx,
sdpBindTlsL2ptStatsPvstRstBpdusTx,
sdpBindTlsL2ptStatsPvstTcnBpdusRx,
sdpBindTlsL2ptStatsPvstTcnBpdusTx,
sdpBindTlsL2ptStatsOtherBpdusRx,
sdpBindTlsL2ptStatsOtherBpdusTx,
sdpBindTlsL2ptStatsOtherL2ptBpdusRx,
sdpBindTlsL2ptStatsOtherL2ptBpdusTx,
sdpBindTlsL2ptStatsOtherInvalidBpdusRx,
sdpBindTlsL2ptStatsOtherInvalidBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapCdpBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapCdpBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapVtpBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapVtpBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapDtpBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapDtpBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapPagpBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapPagpBpdusTx,
sdpBindTlsL2ptStatsL2ptEncapUdldBpdusRx,
sdpBindTlsL2ptStatsL2ptEncapUdldBpdusTx,
sdpBindTlsL2ptStatsCdpBpdusRx,
sdpBindTlsL2ptStatsCdpBpdusTx,
sdpBindTlsL2ptStatsVtpBpdusRx,
sdpBindTlsL2ptStatsVtpBpdusTx,
sdpBindTlsL2ptStatsDtpBpdusRx,
sdpBindTlsL2ptStatsDtpBpdusTx,
sdpBindTlsL2ptStatsPagpBpdusRx,
sdpBindTlsL2ptStatsPagpBpdusTx,
sdpBindTlsL2ptStatsUdldBpdusRx,
sdpBindTlsL2ptStatsUdldBpdusTx
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP bind L2pt feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 109 }
tmnxSdpAutoBindV6v0Group OBJECT-GROUP
OBJECTS {
pwTemplateTableLastChanged,
pwTemplateRowStatus,
pwTemplateLastChanged,
pwTemplateVcType,
pwTemplateAccountingPolicyId,
pwTemplateCollectAcctStats,
pwTemplateMacLearning,
pwTemplateMacAgeing,
pwTemplateDiscardUnknownSource,
pwTemplateLimitMacMove,
pwTemplateMacPinning,
pwTemplateMacAddressLimit,
pwTemplateShgName,
pwTemplateShgDescription,
pwTemplateShgRestProtSrcMac,
pwTemplateShgRestUnprotDstMac,
pwTemplateEgressMacFilterId,
pwTemplateEgressIpFilterId,
pwTemplateEgressIpv6FilterId,
pwTemplateIngressMacFilterId,
pwTemplateIngressIpFilterId,
pwTemplateIngressIpv6FilterId,
pwTemplateIgmpFastLeave,
pwTemplateIgmpImportPlcy,
pwTemplateIgmpLastMembIntvl,
pwTemplateIgmpMaxNbrGrps,
pwTemplateIgmpGenQueryIntvl,
pwTemplateIgmpQueryRespIntvl,
pwTemplateIgmpRobustCount,
pwTemplateIgmpSendQueries,
pwTemplateIgmpMcacPolicyName,
pwTemplateIgmpMcacPrRsvMndBW,
pwTemplateIgmpMcacUnconstBW,
pwTemplateIgmpVersion,
pwTemplateIgmpSnpgGrpSrcTblLC,
pwTemplateIgmpSnpgRowStatus,
pwTemplateIgmpSnpgLastChngd,
pwTemplateMfibAllowedMdaTblLC,
pwTemplateMfibMdaRowStatus,
pwTemplateUseProvisionedSdp,
pwTemplateVlanVcTag,
sdpAutoBindBgpInfoTableLC,
sdpAutoBindBgpInfoTemplateId,
sdpAutoBindBgpInfoAGI,
sdpAutoBindBgpInfoSAII,
sdpAutoBindBgpInfoTAII
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting SDP auto-bind feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 112 }
tmnxSdpBindTlsMrpV6v0Group OBJECT-GROUP
OBJECTS {
sdpBindTlsMrpTableLastChanged,
sdpBindTlsMrpLastChngd,
sdpBindTlsMrpJoinTime,
sdpBindTlsMrpLeaveTime,
sdpBindTlsMrpLeaveAllTime,
sdpBindTlsMrpPeriodicTime,
sdpBindTlsMrpPeriodicEnabled,
sdpBindTlsMrpRxPdus,
sdpBindTlsMrpDroppedPdus,
sdpBindTlsMrpTxPdus,
sdpBindTlsMrpRxNewEvent,
sdpBindTlsMrpRxJoinInEvent,
sdpBindTlsMrpRxInEvent,
sdpBindTlsMrpRxJoinEmptyEvent,
sdpBindTlsMrpRxEmptyEvent,
sdpBindTlsMrpRxLeaveEvent,
sdpBindTlsMrpTxNewEvent,
sdpBindTlsMrpTxJoinInEvent,
sdpBindTlsMrpTxInEvent,
sdpBindTlsMrpTxJoinEmptyEvent,
sdpBindTlsMrpTxEmptyEvent,
sdpBindTlsMrpTxLeaveEvent,
sdpBindTlsMmrpDeclared,
sdpBindTlsMmrpRegistered
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting SDP MRP feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 113 }
tmnxSdpTlsBgpV6v0Group OBJECT-GROUP
OBJECTS {
svcTlsBgpADPWTempBindTblLC,
svcTlsBgpADPWTempBindRowStatus,
svcTlsBgpADPWTempBindLastChngd,
svcTlsBgpADPWTempBindSHG,
svcTlsBgpADPWTempBindRTTblLC,
svcTlsBgpADPWTempBindRTRowStat
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP BGP feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 114 }
tmnxSdpL2V6v0Group OBJECT-GROUP
OBJECTS {
sdpCreationOrigin,
sdpBindCreationOrigin,
svcL2RteTableLastChanged,
svcL2RteSdpBindId,
svcL2RtePwTemplateId,
svcL2RteError,
svcL2RteLastErrorTime
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP L2 Route feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 115 }
tmnxSdpAutoBindV6v1Group OBJECT-GROUP
OBJECTS {
pwTemplateTableLastChanged,
pwTemplateRowStatus,
pwTemplateLastChanged,
pwTemplateVcType,
pwTemplateAccountingPolicyId,
pwTemplateCollectAcctStats,
pwTemplateMacLearning,
pwTemplateMacAgeing,
pwTemplateDiscardUnknownSource,
pwTemplateLimitMacMove,
pwTemplateMacPinning,
pwTemplateMacAddressLimit,
pwTemplateShgName,
pwTemplateShgDescription,
pwTemplateShgRestProtSrcMac,
pwTemplateShgRestUnprotDstMac,
pwTemplateEgressMacFilterId,
pwTemplateEgressIpFilterId,
pwTemplateEgressIpv6FilterId,
pwTemplateIngressMacFilterId,
pwTemplateIngressIpFilterId,
pwTemplateIngressIpv6FilterId,
pwTemplateIgmpFastLeave,
pwTemplateIgmpImportPlcy,
pwTemplateIgmpLastMembIntvl,
pwTemplateIgmpMaxNbrGrps,
pwTemplateIgmpGenQueryIntvl,
pwTemplateIgmpQueryRespIntvl,
pwTemplateIgmpRobustCount,
pwTemplateIgmpSendQueries,
pwTemplateIgmpVersion,
pwTemplateIgmpSnpgGrpSrcTblLC,
pwTemplateIgmpSnpgRowStatus,
pwTemplateIgmpSnpgLastChngd,
pwTemplateMfibAllowedMdaTblLC,
pwTemplateMfibMdaRowStatus,
pwTemplateUseProvisionedSdp,
pwTemplateVlanVcTag,
sdpAutoBindBgpInfoTableLC,
sdpAutoBindBgpInfoTemplateId,
sdpAutoBindBgpInfoAGI,
sdpAutoBindBgpInfoSAII,
sdpAutoBindBgpInfoTAII
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting SDP auto-bind feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 116 }
tmnxSdpAutoBindV7v0Group OBJECT-GROUP
OBJECTS {
pwTemplateTableLastChanged,
pwTemplateRowStatus,
pwTemplateLastChanged,
pwTemplateVcType,
pwTemplateAccountingPolicyId,
pwTemplateCollectAcctStats,
pwTemplateMacLearning,
pwTemplateMacAgeing,
pwTemplateDiscardUnknownSource,
pwTemplateLimitMacMove,
pwTemplateMacPinning,
pwTemplateMacAddressLimit,
pwTemplateShgName,
pwTemplateShgDescription,
pwTemplateShgRestProtSrcMac,
pwTemplateShgRestUnprotDstMac,
pwTemplateEgressMacFilterId,
pwTemplateEgressIpFilterId,
pwTemplateEgressIpv6FilterId,
pwTemplateIngressMacFilterId,
pwTemplateIngressIpFilterId,
pwTemplateIngressIpv6FilterId,
pwTemplateIgmpFastLeave,
pwTemplateIgmpImportPlcy,
pwTemplateIgmpLastMembIntvl,
pwTemplateIgmpMaxNbrGrps,
pwTemplateIgmpGenQueryIntvl,
pwTemplateIgmpQueryRespIntvl,
pwTemplateIgmpRobustCount,
pwTemplateIgmpSendQueries,
pwTemplateIgmpVersion,
pwTemplateForceVlanVcForwarding,
pwTemplateIgmpSnpgGrpSrcTblLC,
pwTemplateIgmpSnpgRowStatus,
pwTemplateIgmpSnpgLastChngd,
pwTemplateMfibAllowedMdaTblLC,
pwTemplateMfibMdaRowStatus,
pwTemplateUseProvisionedSdp,
pwTemplateVlanVcTag,
sdpAutoBindBgpInfoTableLC,
sdpAutoBindBgpInfoTemplateId,
sdpAutoBindBgpInfoAGI,
sdpAutoBindBgpInfoSAII,
sdpAutoBindBgpInfoTAII
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP auto-bind feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 117 }
tmnxSdpBindIpipeV7v0Group OBJECT-GROUP
OBJECTS {
sdpBindIpipeCeInetAddressType,
sdpBindIpipeCeInetAddress,
sdpBindIpipePeerCeInetAddrType,
sdpBindIpipePeerCeInetAddr
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting SDP Bind Ipipe feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 118 }
tmnxSdpL2V7v0Group OBJECT-GROUP
OBJECTS {
sdpEnforceDiffServLspFc
}
STATUS current
DESCRIPTION
"The group of objects supporting 'DiffServ' TE feature for SDP
on Nokia SROS series systems."
::= { tmnxSdpGroups 119 }
tmnxSdpEvalPwTempV7v0Group OBJECT-GROUP
OBJECTS {
svcApplyEvalPwTemplateAction,
svcApplyEvalPwTemplateErrorMsg,
svcApplyEvalPwTemplateId,
svcApplyEvalPwTemplateSuccess,
svcApplyEvalPwTemplateSvcId,
svcApplyEvalPwTemplateTime
}
STATUS current
DESCRIPTION
"The group of objects supporting evaluating pseudowite template
on Nokia SROS series systems in release 7.0."
::= { tmnxSdpGroups 120 }
tmnxSdpLdpBackupV8v0Group OBJECT-GROUP
OBJECTS {
sdpMixedLspModeEnabled,
sdpLspRevertTime,
sdpLspRevertTimeCountDown,
sdpLdpLspId,
sdpLdpActive
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting LDP backup feature for SDP
on Nokia SROS series systems."
::= { tmnxSdpGroups 121 }
tmnxSdpPbbGroup OBJECT-GROUP
OBJECTS {
sdpBindPbbRowStatus,
sdpBindPbbLastMgmtChange,
sdpBindPbbIgmpSnpgMRouter
}
STATUS current
DESCRIPTION
"The group of objects supporting
Provider Backbone Bridging (PBB/IEEE 802.1ah) feature for SDP
on Nokia SROS series systems."
::= { tmnxSdpGroups 122 }
tmnxSdpBindGenGroup OBJECT-GROUP
OBJECTS {
sdpBindDescription
}
STATUS current
DESCRIPTION
"The group of objects supporting additional SDP bind features
on Nokia SROS series systems."
::= { tmnxSdpGroups 123 }
tmnxSdpBindTlsMrpV8v0Group OBJECT-GROUP
OBJECTS {
sdpBindTlsMrpTableLastChanged,
sdpBindTlsMrpLastChngd,
sdpBindTlsMrpJoinTime,
sdpBindTlsMrpLeaveTime,
sdpBindTlsMrpLeaveAllTime,
sdpBindTlsMrpPeriodicTime,
sdpBindTlsMrpPeriodicEnabled,
sdpBindTlsMrpRxPdus,
sdpBindTlsMrpDroppedPdus,
sdpBindTlsMrpTxPdus,
sdpBindTlsMrpRxNewEvent,
sdpBindTlsMrpRxJoinInEvent,
sdpBindTlsMrpRxInEvent,
sdpBindTlsMrpRxJoinEmptyEvent,
sdpBindTlsMrpRxEmptyEvent,
sdpBindTlsMrpRxLeaveEvent,
sdpBindTlsMrpTxNewEvent,
sdpBindTlsMrpTxJoinInEvent,
sdpBindTlsMrpTxInEvent,
sdpBindTlsMrpTxJoinEmptyEvent,
sdpBindTlsMrpTxEmptyEvent,
sdpBindTlsMrpTxLeaveEvent,
sdpBindTlsMmrpDeclared,
sdpBindTlsMmrpRegistered,
sdpBindTlsMmrpEndStation,
sdpBindTlsMrpPolicy
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP MRP feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 124 }
tmnxSdpV8v0Group OBJECT-GROUP
OBJECTS {
sdpNetDomainName,
sdpEgressIfsNetDomainConsistent,
sdpBgpTunnelEnabled,
sdpBgpTunnelLspId,
sdpTunnelFarEndIpAddress
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting SDP feature on Nokia SROS
series systems in the 8.0 release."
::= { tmnxSdpGroups 125 }
tmnxSdpBindV8v0Group OBJECT-GROUP
OBJECTS {
sdpBindSiteName,
sdpBindHashLabel,
sdpBindHashLabelSignalCapability,
sdpBindIsaAaApplicationProfile,
sdpBindFPropBMacAddrTblLastChgd,
sdpBindFPropBMacAddrRowStatus,
sdpBindPwStatusSignaling
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind feature on Nokia
SROS series systems in the 8.0 release."
::= { tmnxSdpGroups 126 }
tmnxSdpAutoBindV8v0Group OBJECT-GROUP
OBJECTS {
pwTemplateHashLabel,
pwTemplateControlWord,
pwTemplateHashLabelSignalCap,
sdpAutoBindBgpVplsTableLC,
sdpAutoBindBgpVplsTemplateId
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP auto-bind feature
on Nokia SROS series systems in the 8.0 release."
::= { tmnxSdpGroups 127 }
tmnxSdpBindIpipeV8v0Group OBJECT-GROUP
OBJECTS {
sdpBindIpipeCeInetAddressType,
sdpBindIpipeCeInetAddress,
sdpBindIpipePeerCeInetAddrType,
sdpBindIpipePeerCeInetAddr,
sdpBindIpipePeerIpv6Capability,
sdpBindIpipePeerLLCeInetAddr,
sdpBindIpipePeerGlobalCeInetAddr
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind Ipipe feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 128 }
tmnxSdpBindV9v0Group OBJECT-GROUP
OBJECTS {
sdpBindIngressFlowspec
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind feature on Nokia SROS series
systems in the 9.0 release."
::= { tmnxSdpGroups 129 }
tmnxSdpBindCpmProtGroup OBJECT-GROUP
OBJECTS {
sdpBindCpmProtPolicyId,
sdpBindCpmProtMonitorMac,
sdpBindCpmProtEthCfmMonitorFlags
}
STATUS current
DESCRIPTION
"The group of objects supporting management of SDP binding CPM
protection capabilities on release 8.0 R5 of Nokia SROS series
systems."
::= { tmnxSdpGroups 130 }
tmnxSdpBindBsxV9v0Group OBJECT-GROUP
OBJECTS {
sdpBindTransitIpPolicyId,
sdpBindTransitPrefixPolicyId
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind BSX capabilities on
Nokia SROS series systems in the 9.0 release."
::= { tmnxSdpGroups 131 }
tmnxSdpBindTlsV8v0Group OBJECT-GROUP
OBJECTS {
sdpBindTlsInTcBitBpdus,
sdpBindTlsOutTcBitBpdus
}
STATUS current
DESCRIPTION
"The group of objects on Nokia SROS series systems
supporting SDP Bind TLS feature, added in release 8.0."
::= { tmnxSdpGroups 132 }
tmnxSdpV9v0Group OBJECT-GROUP
OBJECTS {
sdpAtBndBgp129Type2SaiiAcId,
sdpAtBndBgp129Type2SaiiGlobalId,
sdpAtBndBgp129Type2SaiiPrefix,
sdpAtBndBgp129Type2TableLC,
sdpAtBndBgp129Type2TaiiAcId,
sdpAtBndBgp129Type2TaiiGlobalId,
sdpAtBndBgp129Type2TaiiPrefix,
sdpAtBndBgp129Type2TemplateId,
svcTlsBgpADPWTempBindOperGrp,
sdpBindOperGrp,
sdpBindMonitorOperGrp,
sdpBindOperHashLabel
}
STATUS current
DESCRIPTION
"The group of objects on Nokia SROS series systems
supporting SDP feature, added in release 9.0."
::= { tmnxSdpGroups 133 }
tmnxSdpMixedLspModeV9v0Group OBJECT-GROUP
OBJECTS {
sdpMixedLspModeEnabled,
sdpLspRevertTime,
sdpLspRevertTimeCountDown,
sdpLdpLspId,
sdpActiveLspType
}
STATUS current
DESCRIPTION
"The group of objects supporting Mixed LSP Mode feature for SDP
on Nokia SROS series systems."
::= { tmnxSdpGroups 134 }
tmnxSdpSpbGroup OBJECT-GROUP
OBJECTS {
sdpBindTlsSpbAdminState,
sdpBindTlsSpbIfIndex,
sdpBindTlsSpbLastChgd,
sdpBindTlsSpbRowStatus,
sdpBindTlsSpbTblLastChanged
}
STATUS current
DESCRIPTION
"The group of objects supporting Shortest Path Bridging feature for
SDP on Nokia SROS series systems."
::= { tmnxSdpGroups 135 }
tmnxSdpBindBsxV10v0Group OBJECT-GROUP
OBJECTS {
sdpBindAarpId,
sdpBindAarpServRefType
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind BSX capabilities on
Nokia SROS series systems in the 10.0 release."
::= { tmnxSdpGroups 136 }
tmnxSdpPwPortGroup OBJECT-GROUP
OBJECTS {
sdpPwPortAdminStatus,
sdpPwPortEncapType,
sdpPwPortLastChgd,
sdpPwPortRowStatus,
sdpPwPortTblLastChanged,
sdpPwPortVcId,
sdpPwPortOperStatus,
sdpPwPortOperFlags,
sdpPwPortVcType,
sdpPwPortVlanVcTag,
sdpPwPortEgrShapDefIntDestId,
sdpPwPortEgrShapVPort,
sdpBindingPort
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting SDP MPLS pseudo-wire port support on
Nokia SROS series systems in the 10.0 release."
::= { tmnxSdpGroups 137 }
tmnxSdpV10v0Group OBJECT-GROUP
OBJECTS {
sdpBindPwLocalStatusBits,
pwTemplateAutoLearnMacProtect,
pwTemplateRestProtSrcMac,
pwTemplateRestProtSrcMacAction,
pwTemplateShgAutoLearnMacProtect,
pwTemplateShgRestProtSrcMacAct,
sdpBindTlsAutoLearnMacProtect,
sdpBindTlsRestProtSrcMac,
sdpBindTlsRestProtSrcMacAction,
sdpBindMeshTlsAutoLearnMacProt,
sdpBindMeshTlsRestProtSrcMac,
sdpBindMeshTlsRestProtSrcMacAct
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP general capabilities on
Nokia SROS series systems in the 10.0 release."
::= { tmnxSdpGroups 138 }
tmnxSdpBindDhcpV11v0Group OBJECT-GROUP
OBJECTS {
sdpBindDhcp6Description,
sdpBindDhcp6Snoop,
sdpBindDhcpStatsClntProxUDBPckts
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind DHCP feature
on Nokia SROS series systems added in 11.0 release."
::= { tmnxSdpGroups 139 }
tmnxSdpBindDhcpV13v0Group OBJECT-GROUP
OBJECTS {
sdpBindDhcpStatsClntProxNqPckts
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind DHCP feature
added in 13.0 release of Nokia SROS series systems."
::= { tmnxSdpGroups 140 }
tmnxSdpNotifyObjsV6v0Group OBJECT-GROUP
OBJECTS {
sdpNotifySdpId,
sdpMaxBookableBandwidth,
sdpBookedBandwidth,
dynamicSdpStatus,
dynamicSdpOrigin,
dynamicSdpCreationError,
dynamicSdpBindCreationError
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting SDP notification objects
on Nokia SROS series systems."
::= { tmnxSdpGroups 200 }
tmnxSdpNotifyObjsV7v0Group OBJECT-GROUP
OBJECTS {
sdpNotifySdpId,
sdpMaxBookableBandwidth,
sdpBookedBandwidth,
dynamicSdpStatus,
dynamicSdpOrigin,
dynamicSdpCreationError,
dynamicSdpBindCreationError,
sdpBindNotifyMacAddr
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP notification objects on Nokia SROS
series systems."
::= { tmnxSdpGroups 201 }
tmnxSdpNotifyObjsV8v0Group OBJECT-GROUP
OBJECTS {
sdpEgIfNetDomainInconsCount
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP notification objects on Nokia SROS
series systems 8.0 release."
::= { tmnxSdpGroups 202 }
tmnxSdpBgpVplsV8v0Group OBJECT-GROUP
OBJECTS {
svcL2BgpVplsRteControlWord,
svcL2BgpVplsRteError,
svcL2BgpVplsRteLastErrorTime,
svcL2BgpVplsRtePathMtu,
svcL2BgpVplsRtePwTemplateId,
svcL2BgpVplsRteSdpBindId,
svcL2BgpVplsRteSeqDelivery,
svcL2BgpVplsRteState,
svcL2BgpVplsRteDF
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP specific BGP VPLS feature on Nokia
SROS series systems."
::= { tmnxSdpGroups 203 }
tmnxSdpL2V8v0Group OBJECT-GROUP
OBJECTS {
svcL2RteStatus,
svcL2BgpVplsRteStatus
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP specific L2 feature in 8.0 on
Nokia SROS series systems."
::= { tmnxSdpGroups 204 }
tmnxSdpPwV8v0Group OBJECT-GROUP
OBJECTS {
sdpBindStandbySigSlave
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP specific pseudo-wire feature in
8.0 on Nokia SROS series systems."
::= { tmnxSdpGroups 205 }
tmnxSdpBindEthCfmGroup OBJECT-GROUP
OBJECTS {
sdpBindEthCfmTableLastChanged,
sdpBindEthCfmRowLastChanged,
sdpBindEthCfmVMepFilter
}
STATUS current
DESCRIPTION
"The group of objects supporting Ethernet Connectivity Fault Management
(CFM) for the SDP-BIND feature on Nokia SROS series systems for
Release 9.0."
::= { tmnxSdpGroups 206 }
tmnxSdpNotifyObjsV9v0Group OBJECT-GROUP
OBJECTS {
sdpMSPwPeId
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP notification objects on Nokia SROS
series systems 9.0 release."
::= { tmnxSdpGroups 207 }
tmnxSdpBindIpipeNotifyObjsGroup OBJECT-GROUP
OBJECTS {
sdpBindIpipeCeIpAddrType,
sdpBindIpipeCeIpAddress
}
STATUS current
DESCRIPTION
"The group of objects supporting Ipipe SDP notification objects on
Nokia SROS series systems."
::= { tmnxSdpGroups 208 }
tmnxSdpObsoletedObjsV6v1Group OBJECT-GROUP
OBJECTS {
pwTemplateIgmpMcacPolicyName,
pwTemplateIgmpMcacPrRsvMndBW,
pwTemplateIgmpMcacUnconstBW
}
STATUS current
DESCRIPTION
"The group of obsolete objects for the service SDPs on Nokia SROS
series systems."
::= { tmnxSdpGroups 300 }
tmnxSdpObsoletedObjsV9v0Group OBJECT-GROUP
OBJECTS {
sdpLdpActive
}
STATUS current
DESCRIPTION
"The group of obsolete objects for the service SDPs on Nokia SROS
series systems."
::= { tmnxSdpGroups 301 }
tmnxSdpBindQGrpObjsV10v0Group OBJECT-GROUP
OBJECTS {
sdpBindIngressQoSNetworkPlcyId,
sdpBindEgressQoSNetworkPlcyId,
sdpBindIngressQoSFpRedirectQGrp,
sdpBindEgressQoSPortRedirectQGrp,
sdpBindIngressQoSInstanceId,
sdpBindEgressQoSInstanceId,
pwTemplateIngQoSNetworkPlcyId,
pwTemplateEgrQoSNetworkPlcyId,
pwTemplateIngQoSFpRedirectQGrp,
pwTemplateEgrQoSPortRedirectQGrp,
pwTemplateIngQoSInstanceId,
pwTemplateEgrQoSInstanceId
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP binding queue group objects on
Nokia SROS series systems 10.0 release."
::= { tmnxSdpGroups 302 }
tmnxSdpNotifyV6v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
unacknowledgedTCN,
tmnxSvcTopoChgSdpBindMajorState,
tmnxSvcNewRootSdpBind,
tmnxSvcTopoChgSdpBindState,
tmnxSvcSdpBindRcvdTCN,
tmnxSvcSdpBindRcvdHigherBriPrio,
tmnxSvcSdpBindEncapPVST,
tmnxSvcSdpBindEncapDot1d,
tmnxSvcSdpActiveProtocolChange,
tmnxStpMeshNotInMstRegion,
tmnxSdpBndStpExcepCondStateChng,
sdpStatusChanged,
sdpBindStatusChanged,
sdpTlsMacAddrLimitAlarmRaised,
sdpTlsMacAddrLimitAlarmCleared,
sdpBindDHCPLeaseEntriesExceeded,
sdpBindDHCPLseStateOverride,
sdpBindDHCPLseStatePopulateErr,
sdpBindDHCPSuspiciousPcktRcvd,
sdpBindPwPeerStatusBitsChanged,
sdpBindTlsMacMoveExceeded,
sdpBindPwPeerFaultAddrChanged,
sdpBindDHCPProxyServerError,
sdpBindSdpStateChangeProcessed,
sdpBindDHCPLseStateMobilityErr,
sdpBandwidthOverbooked,
sdpBindInsufficientBandwidth,
dynamicSdpConfigChanged,
dynamicSdpBindConfigChanged,
dynamicSdpCreationFailed,
dynamicSdpBindCreationFailed
}
STATUS current
DESCRIPTION
"The group of SDP notifications on Nokia SROS series systems."
::= { tmnxSdpGroups 400 }
tmnxSdpObsoletedNotifyV6v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
sdpCreated,
sdpDeleted,
sdpBindCreated,
sdpBindDeleted,
sdpTlsDHCPSuspiciousPcktRcvd,
sdpBindDHCPCoAError,
sdpBindDHCPSubAuthError
}
STATUS current
DESCRIPTION
"The group of obsoleted SDP objects on Nokia SROS series
systems."
::= { tmnxSdpGroups 401 }
tmnxSdpNotifyV8v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
sdpEgrIfsNetDomInconsCntChanged
}
STATUS current
DESCRIPTION
"The group of SDP notifications on Nokia SROS series systems 8.0
release."
::= { tmnxSdpGroups 402 }
tmnxSdpBindIpipeNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS {
sdpBindIpipeCeIpAddressChange
}
STATUS current
DESCRIPTION
"The group of Ipipe SDP notifications on Nokia SROS series systems."
::= { tmnxSdpGroups 403 }
tmnxSdpNotifyV10v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
sdpBindPwLocalStatusBitsChanged,
sdpBindReceivedProtSrcMac
}
STATUS current
DESCRIPTION
"The group of SDP notifications on Nokia SROS series systems 10.0
release."
::= { tmnxSdpGroups 404 }
tmnxSdpNotifyV11v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
sdpBindTlsMacMoveExceedNonBlock
}
STATUS current
DESCRIPTION
"The group of SDP notifications on Nokia SROS series systems 11.0
release."
::= { tmnxSdpGroups 405 }
tmnxSdpGrpGroup OBJECT-GROUP
OBJECTS {
pwTempExcSdpGrpLastChanged,
pwTempExcSdpGrpRowStatus,
pwTempExcSdpGrpTableLastChanged,
pwTempIncSdpGrpLastChanged,
pwTempIncSdpGrpRowStatus,
pwTempIncSdpGrpTableLastChanged,
sdpGrpLastChange,
sdpGrpRowStatus,
sdpGrpTblLastChanged,
sdpGrpValue,
sdpSdpGrpLastChange,
sdpSdpGrpRowStatus,
sdpSdpGrpTblLastChanged
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP supporting SDP group on Nokia SROS
series systems."
::= { tmnxSdpGroups 500 }
tmnxSdpBindBlockOnPeerFaultGroup OBJECT-GROUP
OBJECTS {
pwTemplateBlockOnPeerFault,
sdpBindBlockOnPeerFault
}
STATUS current
DESCRIPTION
"The group of objects supporting specific SDP feature on Nokia SROS
series systems."
::= { tmnxSdpGroups 501 }
tmnxSdpBindFlowSpecGroup OBJECT-GROUP
OBJECTS {
sdpBindIngressFlowspec,
sdpBindIngressIPv6Flowspec
}
STATUS current
DESCRIPTION
"The group of objects supporting specific SDP feature on Nokia SROS
series systems."
::= { tmnxSdpGroups 502 }
tmnxSdpBindPwPortGroup OBJECT-GROUP
OBJECTS {
sdpFarEndNodeId,
sdpFarEndGlobalId,
sdpBindPwPathRowStatus,
sdpBindPwPathAgi,
sdpBindPwPathLastChanged,
sdpBindPwPathSaiiAcId,
sdpBindPwPathSaiiGlobalId,
sdpBindPwPathSaiiNodeId,
sdpBindPwPathTableLastChanged,
sdpBindPwPathTaiiAcId,
sdpBindPwPathTaiiGlobalId,
sdpBindPwPathTaiiNodeId
}
STATUS current
DESCRIPTION
"The group of objects supporting specific SDP feature on Nokia SROS
series systems."
::= { tmnxSdpGroups 503 }
tmnxSdpVllBgpV11v0Group OBJECT-GROUP
OBJECTS {
sdpAutoBindBgpVpwsTemplateId,
svcL2BgpVpwsRteSdpBindId,
svcL2BgpVpwsRtePwTemplateId,
svcL2BgpVpwsRteError,
svcL2BgpVpwsRteLastErrorTime,
svcL2BgpVpwsRteControlWord,
svcL2BgpVpwsRtePathMtu,
svcL2BgpVpwsRteState,
svcL2BgpVpwsRteSeqDelivery,
svcL2BgpVpwsRteStatus,
svcL2BgpVpwsRteCsv,
svcL2BgpVpwsRtePreference,
svcL2BgpVpwsRteTxStatus,
svcVllBgpADPWTempBindRTTblLC,
svcVllBgpADPWTempBindRTRowStat,
svcVllBgpADPWTempBindTblLC,
svcVllBgpADPWTempBindRowStatus,
svcVllBgpADPWTempBindLastChngd,
svcVllBgpADPWTempBindEndPt
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP BGP feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 504 }
tmnxSdpL2tpv3Group OBJECT-GROUP
OBJECTS {
sdpBindMirrorRemoteSource,
sdpFarEndInetAddressType,
sdpFarEndInetAddress,
sdpLocalEndInetAddressType,
sdpLocalEndInetAddress,
sdpBindL2tpv3SessMismatch,
sdpBindL2tpv3SessMismatchLstClrd,
sdpBindL2tpv3IngressCookie,
sdpBindL2tpv3EgressCookie
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP L2TPV3 feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 505 }
tmnxSdpBindSpbV11v0Group OBJECT-GROUP
OBJECTS {
sdpBindTlsStaticIsidStatus,
sdpBindTlsStaticIsidRngRowStatus,
sdpBindTlsStaticIsidRngLastChgd,
sdpBindTlsStaticIsidRngLow,
sdpBindTlsStaticIsidRngHigh
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP SPB feature
on Nokia SROS series systems in 11.0 release."
::= { tmnxSdpGroups 506 }
tmnxSdpBindEthLoopbackV11v0Group OBJECT-GROUP
OBJECTS {
sdpBindEthLoopbackRowStatus,
sdpBindEthLoopbackMode,
sdpBindEthLoopbackMacSwap,
sdpBindEthLoopbackMacSwapAddr,
sdpBindEthLoopbackMacSwapAddrAll
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the SDP Binding Ethernet
Loopback feature on Nokia SROS series systems in release 11.0."
::= { tmnxSdpGroups 507 }
tmnxSdpBindEthLpbkNtfyV11v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
sdpBindEthLoopbackStarted,
sdpBindEthLoopbackStopped
}
STATUS current
DESCRIPTION
"The group of notifications supporting management of the SDP Binding
Ethernet Loopback feature on Nokia SROS series systems in release
11.0."
::= { tmnxSdpGroups 508 }
tmnxSdpPwSecShaperGroup OBJECT-GROUP
OBJECTS {
sdpPwPortEgrShapSapSecShaper
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP PW port feature
on Nokia SROS series systems in release 11.0."
::= { tmnxSdpGroups 509 }
tmnxSdpPwPortV11v0Group OBJECT-GROUP
OBJECTS {
sdpPwPortAdminStatus,
sdpPwPortLastChgd,
sdpPwPortRowStatus,
sdpPwPortTblLastChanged,
sdpPwPortVcId,
sdpPwPortOperStatus,
sdpPwPortOperFlags,
sdpPwPortVcType,
sdpPwPortVlanVcTag,
sdpPwPortEgrShapDefIntDestId,
sdpPwPortEgrShapVPort,
sdpBindingPort
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP MPLS pseudo-wire port support on
Nokia SROS series systems in the 10.0 release."
::= { tmnxSdpGroups 510 }
tmnxSdpObsoletedObjsV11v0Group OBJECT-GROUP
OBJECTS {
sdpPwPortEncapType
}
STATUS current
DESCRIPTION
"The group of obsoleted objects for the service SDPs on Nokia SROS
series systems in the 11.0 release."
::= { tmnxSdpGroups 511 }
tmnxSdpBindCtrlChanGroup OBJECT-GROUP
OBJECTS {
sdpBindCtrlChanPwStatus,
sdpBindCtrlChanPwLastChanged,
sdpBindCtrlChanPwRefreshTimer,
sdpBindCtrlChanPwPeerExpired,
sdpBindCtrlChanPwTableLastChgd
}
STATUS current
DESCRIPTION
"The group of objects supporting specific SDP pseudo-wire control
channel feature on Nokia SROS series systems."
::= { tmnxSdpGroups 512 }
sdpBindTlsFdbMacStatsGroup OBJECT-GROUP
OBJECTS {
sdpBindTlsFdbMacStatsNumEntries
}
STATUS current
DESCRIPTION
"The group of additional objects for the management of MAC statistics
per FDB type on SDP Bindings for release 11.0 of the SROS series
systems."
::= { tmnxSdpGroups 514 }
sdpBindTlsEtreeGroup OBJECT-GROUP
OBJECTS {
sdpBindEtreeRootLeafTag,
sdpBindEtreeLeafAc
}
STATUS current
DESCRIPTION
"The group of objects supporting ETree feature for SDPs on Nokia SROS
series systems."
::= { tmnxSdpGroups 515 }
tmnxSdpBindCpmProtV12v0Group OBJECT-GROUP
OBJECTS {
sdpBindCpmProtMonitorIP
}
STATUS current
DESCRIPTION
"The group of objects supporting management of CPM Protection on SDP
Bindings for release 12.0 of the SROS series systems."
::= { tmnxSdpGroups 516 }
tmnxSdpBindCtrlChanReqGroup OBJECT-GROUP
OBJECTS {
sdpBindCtrlChanPwRequestTimer,
sdpBindCtrlChanPwRetryTimer,
sdpBindCtrlChanPwTimeoutMult
}
STATUS current
DESCRIPTION
"The group of objects supporting specific SDP pseudo-wire control
channel request-timer feature on Nokia SROS series systems."
::= { tmnxSdpGroups 517 }
tmnxSdpBindCtrlChanAckGroup OBJECT-GROUP
OBJECTS {
sdpBindCtrlChanPwAck
}
STATUS current
DESCRIPTION
"The group of objects supporting specific SDP pseudo-wire control
channel acknowledgement feature on Nokia SROS series systems."
::= { tmnxSdpGroups 518 }
tmnxSdpPBBEpipePWRedV12v0Group OBJECT-GROUP
OBJECTS {
sdpSourceBMacLSB,
sdpControlPWVCId,
sdpBindUseSdpBMac,
sdpControlPWIsActive
}
STATUS current
DESCRIPTION
"The group of objects supporting PBB epipe pseudo-wire redundancy
feature on Nokia SROS series systems for release 12.0."
::= { tmnxSdpGroups 519 }
tmnxSdpPbbEpipeNotifyObjsGroup OBJECT-GROUP
OBJECTS {
sdpPbbActvPwWithNonActvCtrlPw
}
STATUS current
DESCRIPTION
"The group of objects supporting PBB epipe pseudo-wire redundancy
SDP notification objects on Nokia SROS series systems."
::= { tmnxSdpGroups 520 }
tmnxSdpPbbEpipeNotifV12v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
sdpPbbActvPwWithNonActvCtrlPwChg
}
STATUS current
DESCRIPTION
"The group of notifications supporting management of the SDP Binding
SDP feature on Nokia SROS series systems in release 12.0."
::= { tmnxSdpGroups 521 }
tmnxSdpBindEthCfmV12v0Group OBJECT-GROUP
OBJECTS {
sdpBindEthCfmSquelchIngress,
sdpBindEthCfmCollectLmmStats
}
STATUS current
DESCRIPTION
"The group of additional objects supporting Ethernet Connectivity Fault
Management (ETH-CFM) for the SDP-BIND feature on Nokia SROS series
systems for Release 12.0."
::= { tmnxSdpGroups 522 }
tmnxSdpV12v0Group OBJECT-GROUP
OBJECTS {
svcTlsBgpADPWTempBindCreatOrigin,
sdpNumEntries,
sdpNextFreeId,
sdpId,
sdpRowStatus,
sdpDelivery,
sdpFarEndIpAddress,
sdpLspList,
sdpDescription,
sdpLabelSignaling,
sdpAdminStatus,
sdpOperStatus,
sdpOperPathMtu,
sdpKeepAliveAdminStatus,
sdpKeepAliveOperStatus,
sdpKeepAliveHelloTime,
sdpKeepAliveMaxDropCount,
sdpKeepAliveHoldDownTime,
sdpLastMgmtChange,
sdpKeepAliveNumHelloRequestMessages,
sdpKeepAliveNumHelloResponseMessages,
sdpKeepAliveNumLateHelloResponseMessages,
sdpKeepAliveHelloRequestTimeout,
sdpLdpEnabled,
sdpVlanVcEtype,
sdpAdvertisedVllMtuOverride,
sdpOperFlags,
sdpLastStatusChange,
sdpMvplsMgmtService,
sdpMvplsMgmtSdpBndId,
sdpCollectAcctStats,
sdpAccountingPolicyId,
sdpClassFwdingEnabled,
sdpClassFwdingDefaultLsp,
sdpClassFwdingMcLsp,
sdpMetric,
sdpAutoSdp,
sdpPBBEtype,
sdpBandwidthBookingFactor,
sdpOperBandwidth,
sdpAvailableBandwidth,
sdpAdminPathMtu,
sdpKeepAliveHelloMessageLength
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting SDP base feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 523 }
tmnxSdpObsoletedObjsV12v0Group OBJECT-GROUP
OBJECTS {
sdpSnmpAllowed
}
STATUS current
DESCRIPTION
"The group of obsoleted objects for the service SDPs on Nokia SROS
series systems in the 12.0 release."
::= { tmnxSdpGroups 524 }
tmnxSdpBfdV12v0Group OBJECT-GROUP
OBJECTS {
svcVllBgpADPWTempBindBfdTemplate,
svcVllBgpADPWTempBindBfdEnable,
svcVllBgpADPWTempBindBfdEncap,
svcTlsBgpADPWTempBindBfdTemplate,
svcTlsBgpADPWTempBindBfdEnable,
svcTlsBgpADPWTempBindBfdEncap,
sdpBindBfdTemplateName,
sdpBindBfdEnable,
sdpBindBfdEncap
}
STATUS current
DESCRIPTION
"The group of objects for BFD feature for service SDPs on Nokia SROS
series systems in 12.0 release."
::= { tmnxSdpGroups 525 }
tmnxSdpL2tpv3CookieGroup OBJECT-GROUP
OBJECTS {
sdpBindL2tpv3IngressCookie2
}
STATUS current
DESCRIPTION
"The group of objects for L2TP-V3 cookies feature for service SDPs on
Nokia SROS series systems in 12.0 release."
::= { tmnxSdpGroups 526 }
tmnxSdpPwTempBindV12v0Group OBJECT-GROUP
OBJECTS {
svcTlsBgpADPWTempBindMonOperGrp
}
STATUS current
DESCRIPTION
"The group of objects for BFD feature for service SDPs on Nokia SROS
series systems in 12.0 release."
::= { tmnxSdpGroups 527 }
tmnxSdpPbbV12v0Group OBJECT-GROUP
OBJECTS {
sdpBindPbbMldSnpgMRouter
}
STATUS current
DESCRIPTION
"The group of objects supporting
Provider Backbone Bridging (PBB/IEEE 802.1ah) feature for SDP
on Nokia SROS series systems in 12.0 release."
::= { tmnxSdpGroups 528 }
tmnxSdpPwLoopbackGroup OBJECT-GROUP
OBJECTS {
sdpBindPwLoopbackRowStatus,
sdpBindPwAdminLockRowStatus,
sdpBindPwAdminLockTestSvc
}
STATUS current
DESCRIPTION
"The group of objects for pseudo-wire feature for service SDPs on Nokia
SROS series systems."
::= { tmnxSdpGroups 529 }
tmnxPwTemplateAugGroup OBJECT-GROUP
OBJECTS {
pwTemplateAugTableLastChgd,
pwTemplateAugLastChgd,
pwTemplateAugStpAutoEdge,
pwTemplateAugStpRapidStart,
pwTemplateAugStpAdminPtToPt,
pwTemplateAugStpPathCost,
pwTemplateAugStpPriority,
pwTemplateAugStpRootGuard,
pwTemplateAugStpAdminStatus,
pwTemplateAugL2ptTermination,
pwTemplateAugL2ptProtocols
}
STATUS current
DESCRIPTION
"The group of objects for pseudo-wire template feature for services on
Nokia SROS series systems."
::= { tmnxSdpGroups 530 }
tmnxSdpCtrlPwNotifV12v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
sdpControlPwActiveStateChg
}
STATUS current
DESCRIPTION
"The group of notifications supporting management of the SDP feature on
Nokia SROS series systems in release 12.0."
::= { tmnxSdpGroups 531 }
tmnxSdpLdpIpv6Group OBJECT-GROUP
OBJECTS {
sdpTunnelFarEndInetAddressType,
sdpTunnelFarEndInetAddress
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the LDP IPv6 feature for
SDP on Nokia SROS series systems in release 13.0."
::= { tmnxSdpGroups 532 }
tmnxSdpBindV13v0Group OBJECT-GROUP
OBJECTS {
sdpBindIngressVlanTranslation,
sdpBindIngressVlanTranslationId
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of the SDP feature on Nokia
SROS series systems in release 13.0."
::= { tmnxSdpGroups 533 }
tmnxSdpSegRouteGroup OBJECT-GROUP
OBJECTS {
sdpSegRouteIsIs,
sdpSegRouteIsIsOperInstId,
sdpSegRouteIsIsLspId,
sdpSegRouteOspf,
sdpSegRouteOspfOperInstId,
sdpSegRouteOspfLspId,
sdpSegRouteTableLastChgd
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the SDP segment routing
feature on Nokia SROS series systems in release 13.0."
::= { tmnxSdpGroups 534 }
tmnxSdpBindV11v0Group OBJECT-GROUP
OBJECTS {
sdpBindForceQinqVcForwarding,
pwTemplateForceQinqVcForwarding
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting management of the SDP feature on Nokia
SROS series systems in release 11.0."
::= { tmnxSdpGroups 535 }
tmnxSdpPwPortOperGrpGroup OBJECT-GROUP
OBJECTS {
sdpPwPortMonOperGrp
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the pseudo-wire port
operational group feature on Nokia SROS series systems in release
13.0."
::= { tmnxSdpGroups 536 }
tmnxSdpV13v0Group OBJECT-GROUP
OBJECTS {
svcTlsBgpADPWTempBindCreatOrigin,
sdpNumEntries,
sdpNextFreeId,
sdpId,
sdpRowStatus,
sdpDelivery,
sdpLspList,
sdpDescription,
sdpLabelSignaling,
sdpAdminStatus,
sdpOperStatus,
sdpOperPathMtu,
sdpKeepAliveAdminStatus,
sdpKeepAliveOperStatus,
sdpKeepAliveHelloTime,
sdpKeepAliveMaxDropCount,
sdpKeepAliveHoldDownTime,
sdpLastMgmtChange,
sdpKeepAliveNumHelloRequestMessages,
sdpKeepAliveNumHelloResponseMessages,
sdpKeepAliveNumLateHelloResponseMessages,
sdpKeepAliveHelloRequestTimeout,
sdpLdpEnabled,
sdpVlanVcEtype,
sdpAdvertisedVllMtuOverride,
sdpOperFlags,
sdpLastStatusChange,
sdpMvplsMgmtService,
sdpMvplsMgmtSdpBndId,
sdpCollectAcctStats,
sdpAccountingPolicyId,
sdpClassFwdingEnabled,
sdpClassFwdingDefaultLsp,
sdpClassFwdingMcLsp,
sdpMetric,
sdpAutoSdp,
sdpPBBEtype,
sdpBandwidthBookingFactor,
sdpOperBandwidth,
sdpAvailableBandwidth,
sdpAdminPathMtu,
sdpKeepAliveHelloMessageLength,
sdpNetDomainName,
sdpEgressIfsNetDomainConsistent,
sdpBgpTunnelEnabled,
sdpBgpTunnelLspId
}
STATUS obsolete
DESCRIPTION
"The group of objects supporting SDP base feature
on Nokia SROS series systems."
::= { tmnxSdpGroups 537 }
tmnxSdpObsoletedObjsV13v0Group OBJECT-GROUP
OBJECTS {
sdpFarEndIpAddress,
sdpTunnelFarEndIpAddress
}
STATUS current
DESCRIPTION
"The group of obsoleted objects for the service SDPs on Nokia SROS
series systems in the 12.0 release."
::= { tmnxSdpGroups 538 }
sdpBgpEvpnMplsMhGroup OBJECT-GROUP
OBJECTS {
sdpEvpnMHEthSegName
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP BGP EVPN (Ethernet - VPN) MPLS
Multi Home feature on Nokia SROS series systems release 13.0."
::= { tmnxSdpGroups 539 }
sdpGreExtGroup OBJECT-GROUP
OBJECTS {
sdpGreAllowFragmentation
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP GRE extension feature on Nokia
SROS series systems release 13.0."
::= { tmnxSdpGroups 540 }
svcPwTmplExt14v0Group OBJECT-GROUP
OBJECTS {
pwTemplatePreferProvSdp
}
STATUS current
DESCRIPTION
"The group of objects supporting PW Template extension feature on Nokia
SROS series systems release 14.0."
::= { tmnxSdpGroups 541 }
tmnxSdpBindV14v0Group OBJECT-GROUP
OBJECTS {
sdpBindExtTableLastChanged,
sdpBindExtEntropyLabel,
sdpBindExtLastMgmtChange,
pwTemplateEntropyLabel
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP Bind feature on Nokia
SROS series systems in release 14.0."
::= { tmnxSdpGroups 543 }
tmnxSdpSegRouteTeGroup OBJECT-GROUP
OBJECTS {
sdpSegRouteTeOperInstId,
sdpSegRouteTeLspRowStatus,
sdpSegRouteTeLspLastChanged,
sdpSegRouteTeLspTableLastChgd
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the SDP segment routing
feature on Nokia SROS series systems in release 13.0."
::= { tmnxSdpGroups 544 }
tmnxSdpFlowSPecObsoletedV14v0Grp OBJECT-GROUP
OBJECTS {
sdpBindIngressFlowspec,
sdpBindIngressIPv6Flowspec
}
STATUS current
DESCRIPTION
"The group of obsoleted objects supporting SDP BGP Flow-Spec feature on
Nokia SROS series systems release 14.0."
::= { tmnxSdpGroups 545 }
tmnxSdpBindObsoletedV13v0Group OBJECT-GROUP
OBJECTS {
sdpBindIngressVlanTranslation,
sdpBindIngressVlanTranslationId
}
STATUS current
DESCRIPTION
"The group of obsoleted objects supporting management of the SDP
feature on Nokia SROS series systems in release 14.0."
::= { tmnxSdpGroups 546 }
sdpPwStaticLabelGroup OBJECT-GROUP
OBJECTS {
sdpPwPortIngVcLabel,
sdpPwPortEgrVcLabel
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the SDP PW static label
feature on Nokia SROS series systems in release 14.0."
::= { tmnxSdpGroups 547 }
sdpBindV14v0Group OBJECT-GROUP
OBJECTS {
sdpBindMinReqdSdpOperMtu
}
STATUS current
DESCRIPTION
"The group of additional objects supporting management of the SDP BIND
feature on Nokia SROS series systems in release 14.0."
::= { tmnxSdpGroups 548 }
sdpBindTlsV14v0Group OBJECT-GROUP
OBJECTS {
sdpBindDisableSendBvplsEvpnFlush
}
STATUS current
DESCRIPTION
"The group of additional objects supporting management of the SDP BIND
for vpls services feature on Nokia SROS series systems in release
14.0."
::= { tmnxSdpGroups 549 }
sdpFpeV14v0Group OBJECT-GROUP
OBJECTS {
sdpFpeLspId
}
STATUS current
DESCRIPTION
"The group of additional objects supporting management of the SDP for
forward-path-extension feature on Nokia SROS series systems in release
14.0."
::= { tmnxSdpGroups 550 }
sdpBindBgpEvpnAlmpGroup OBJECT-GROUP
OBJECTS {
sdpBindTlsRestProtSrcMacOper,
sdpBindTlsRestProtSrcMacOperAct,
sdpBindMeshTlsRPSMacOper,
sdpBindMeshTlsRPSMacOperAct
}
STATUS current
DESCRIPTION
"The group of additional objects supporting management of the SDP for
BGP EVPN on Nokia SROS series systems in release 14.0."
::= { tmnxSdpGroups 551 }
tmnxSdpMplsLspGroup OBJECT-GROUP
OBJECTS {
sdpMplsLspRowStatus,
sdpMplsLspLastChanged,
sdpMplsLspTableLastChgd
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the SDP segment routing
feature on Nokia SROS series systems in release 15.0."
::= { tmnxSdpGroups 552 }
tmnxSdpCfmLmmPerQosV15v0Group OBJECT-GROUP
OBJECTS {
sdpBindEthCfmCollLmmFcSts,
sdpBindEthCfmCollLmmFcStsInP
}
STATUS current
DESCRIPTION
"The group of objects supporting the ETH-LMM per QoS Class feature on
Nokia SROS series systems."
::= { tmnxSdpGroups 553 }
tmnxObsoletedSdpV15v0Group OBJECT-GROUP
OBJECTS {
sdpLspList
}
STATUS current
DESCRIPTION
"The group of obsoleted objects supporting SDP base feature
on Nokia SROS series systems in release 15.0."
::= { tmnxSdpGroups 554 }
tmnxSdpV15v0Group OBJECT-GROUP
OBJECTS {
svcTlsBgpADPWTempBindCreatOrigin,
sdpNumEntries,
sdpNextFreeId,
sdpId,
sdpRowStatus,
sdpDelivery,
sdpDescription,
sdpLabelSignaling,
sdpAdminStatus,
sdpOperStatus,
sdpOperPathMtu,
sdpKeepAliveAdminStatus,
sdpKeepAliveOperStatus,
sdpKeepAliveHelloTime,
sdpKeepAliveMaxDropCount,
sdpKeepAliveHoldDownTime,
sdpLastMgmtChange,
sdpKeepAliveNumHelloRequestMessages,
sdpKeepAliveNumHelloResponseMessages,
sdpKeepAliveNumLateHelloResponseMessages,
sdpKeepAliveHelloRequestTimeout,
sdpLdpEnabled,
sdpVlanVcEtype,
sdpAdvertisedVllMtuOverride,
sdpOperFlags,
sdpLastStatusChange,
sdpMvplsMgmtService,
sdpMvplsMgmtSdpBndId,
sdpCollectAcctStats,
sdpAccountingPolicyId,
sdpClassFwdingEnabled,
sdpClassFwdingDefaultLsp,
sdpClassFwdingMcLsp,
sdpMetric,
sdpAutoSdp,
sdpPBBEtype,
sdpBandwidthBookingFactor,
sdpOperBandwidth,
sdpAvailableBandwidth,
sdpAdminPathMtu,
sdpKeepAliveHelloMessageLength,
sdpNetDomainName,
sdpEgressIfsNetDomainConsistent,
sdpBgpTunnelEnabled,
sdpBgpTunnelLspId
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP base feature
on Nokia SROS series systems in release 15.0."
::= { tmnxSdpGroups 555 }
tmnxSdpWeightedLoadBalanceGroup OBJECT-GROUP
OBJECTS {
sdpWeightedEcmpEnabled
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP weighted load
balancing feature on Nokia SROS series systems in release
15.0."
::= { tmnxSdpGroups 556 }
sdpEvpnMhEthSegV15v0Group OBJECT-GROUP
OBJECTS {
sdpEvpnMHEthSegStatus
}
STATUS current
DESCRIPTION
"The group of objects supporting VXLAN MH feature on Nokia SROS series
systems release 15.0."
::= { tmnxSdpGroups 557 }
tmnxPwTempNameV15v0Group OBJECT-GROUP
OBJECTS {
pwTemplateName
}
STATUS current
DESCRIPTION
"The group of objects supporting names for PW templates on Nokia series
systems release 15.0."
::= { tmnxSdpGroups 558 }
sdpOperTunnelFarEndGroup OBJECT-GROUP
OBJECTS {
sdpOperTunnelFarEndInetAddrType,
sdpOperTunnelFarEndInetAddr
}
STATUS current
DESCRIPTION
"The group of objects supporting management of tunnel far-end for SDP
on Nokia SROS series systems in release 15.0."
::= { tmnxSdpGroups 559 }
pwTemplateGreGroup OBJECT-GROUP
OBJECTS {
pwTemplateGreDelivery,
pwTemplateAugGreAllowFrag
}
STATUS current
DESCRIPTION
"The group of objects supporting management of PW template GRE feature
on Nokia SROS series systems in release 16.0."
::= { tmnxSdpGroups 560 }
pwTemplateQosV16v0Group OBJECT-GROUP
OBJECTS {
pwTemplateIngQoSNetworkPlcyName,
pwTemplateEgrQoSNetworkPlcyName
}
STATUS current
DESCRIPTION
"The group of objects supporting management of PW template QoS feature
on Nokia SROS series systems in release 16.0."
::= { tmnxSdpGroups 561 }
pwTemplateFilterNameV16v0Group OBJECT-GROUP
OBJECTS {
pwTemplateIngressIpFilterName,
pwTemplateIngressIpv6FilterName,
pwTemplateIngressMacFilterName,
pwTemplateEgressIpFilterName,
pwTemplateEgressIpv6FilterName,
pwTemplateEgressMacFilterName
}
STATUS current
DESCRIPTION
"The group of objects supporting management of SAP templates Filter
feature on Nokia SROS series systems in release 16.0."
::= { tmnxSdpGroups 562 }
tmnxSdpBindQinqV16v0Group OBJECT-GROUP
OBJECTS {
sdpBindForceQinqVcFwding,
pwTemplateForceQinqVcFwding
}
STATUS current
DESCRIPTION
"The group of objects supporting management of Qinq preserve and
translation feature on Nokia SROS series systems in release 16.0."
::= { tmnxSdpGroups 564 }
tmnxSdpBindV16v0ObsoletedGroup OBJECT-GROUP
OBJECTS {
sdpBindForceQinqVcForwarding,
pwTemplateForceQinqVcForwarding
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the SDP feature on Nokia
SROS series systems in release 16.0."
::= { tmnxSdpGroups 565 }
sdpPwPortControlWordGroup OBJECT-GROUP
OBJECTS {
sdpPwPortControlWord
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the SDP pseudo-wire port
with control-word feature on Nokia SROS series systems in release
19.10."
::= { tmnxSdpGroups 566 }
pwTemplateNgeAutoBindGroup OBJECT-GROUP
OBJECTS {
pwTemplateAugAluNgeKeyGroupIn,
pwTemplateAugAluNgeKeyGroupOut
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the SDP pseudo-wire port
with control-word feature on Nokia SROS series systems in release
19.10."
::= { tmnxSdpGroups 567 }
sdpBindMcastSrcV19v0Group OBJECT-GROUP
OBJECTS {
sdpBindMulticastSource
}
STATUS current
DESCRIPTION
"The group of additional objects supporting management of the SDP
feature on Nokia SROS series systems in release 19.0."
::= { tmnxSdpGroups 568 }
sdpNotifyV20v0Group NOTIFICATION-GROUP
NOTIFICATIONS {
sdpBindReceivedPbbProtSrcMac
}
STATUS current
DESCRIPTION
"The group of SDP notifications on Nokia SROS series systems 20.0
release."
::= { tmnxSdpGroups 569 }
sdpBindTlsMacListV20v0Group OBJECT-GROUP
OBJECTS {
sdpBindTlsAutoLrnMacPrtExcList,
sdpBindMeshTlsAutLrnMacPrtExcLs,
pwTemplateAugAtLnMacPrtExcList
}
STATUS current
DESCRIPTION
"The group of objects supporting management of the auto learn Mac list
exclusion feature on Nokia SROS series systems in release 20.0."
::= { tmnxSdpGroups 570 }
sdpBindCfmSquelchInCtagGroup OBJECT-GROUP
OBJECTS {
sdpBindEthCfmSquelchIngressCtag
}
STATUS current
DESCRIPTION
"The group of objects supporting Ethernet Connectivity Fault Management
(ETH-CFM) SDP-BIND squelching for the PVLAN space on Nokia SROS series
systems."
::= { tmnxSdpGroups 571 }
sdpBindVccvBfdGroup OBJECT-GROUP
OBJECTS {
sdpBindExtBfdFailAction,
sdpBindExtBfdSessStatOperState,
sdpBindExtBfdWaitForUpTimer,
sdpBindExtBfdUpTimeRemain
}
STATUS current
DESCRIPTION
"The group of objects supporting VCCV BFD on Nokia SROS series systems."
::= { tmnxSdpGroups 572 }
sdpBindSvcMtuGroup OBJECT-GROUP
OBJECTS {
sdpBindExt2LastMgmtChange,
sdpBindExt2AdvSvcMtu,
sdpBindExt2TableLastChgd
}
STATUS current
DESCRIPTION
"The group of objects supporting service MTU override feature on Nokia
SROS series systems."
::= { tmnxSdpGroups 573 }
sdpPwPortEntropyGroup OBJECT-GROUP
OBJECTS {
sdpPwPortEntropyLabel
}
STATUS current
DESCRIPTION
"The group of objects supporting SDP pw-port entropy-label feature on
Nokia SROS series systems."
::= { tmnxSdpGroups 574 }
sdpLastChangeV21v0Group OBJECT-GROUP
OBJECTS {
sdpBindTableLastChanged,
sdpBindTlsTableLastChanged,
sdpBindTlsLastMgmtChange
}
STATUS current
DESCRIPTION
"The group pf objects supporting last-changed objects on Nokia SROS
series systems release 21.0."
::= { tmnxSdpGroups 575 }
sdpPwPortSvcMtuV21v0Group OBJECT-GROUP
OBJECTS {
sdpPwPortAdvSvcMtu
}
STATUS current
DESCRIPTION
"The group pf objects supporting last-changed objects on Nokia SROS
series systems release 21.0."
::= { tmnxSdpGroups 576 }
sdpTrapsPrefix OBJECT IDENTIFIER ::= { tmnxServNotifications 4 }
sdpTraps OBJECT IDENTIFIER ::= { sdpTrapsPrefix 0 }
sdpCreated NOTIFICATION-TYPE
OBJECTS {
sdpId
}
STATUS obsolete
DESCRIPTION
"The sdpCreated notification is sent when a new row is created in the
sdpInfoTable."
::= { sdpTraps 1 }
sdpDeleted NOTIFICATION-TYPE
OBJECTS {
sdpId
}
STATUS obsolete
DESCRIPTION
"The sdpDeleted notification is sent when an existing row is deleted
from the sdpInfoTable."
::= { sdpTraps 2 }
sdpStatusChanged NOTIFICATION-TYPE
OBJECTS {
sdpId,
sdpAdminStatus,
sdpOperStatus
}
STATUS current
DESCRIPTION
"The sdpStatusChanged notification is generated when there is a change
in the administrative or operating status of an SDP."
::= { sdpTraps 3 }
sdpBindCreated NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId
}
STATUS obsolete
DESCRIPTION
"The sdpBindCreated notification is sent when a new row is created in
the sdpBindTable."
::= { sdpTraps 4 }
sdpBindDeleted NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId
}
STATUS obsolete
DESCRIPTION
"The sdpBindDeleted notification is sent when an existing row is
deleted from the sdpBindTable."
::= { sdpTraps 5 }
sdpBindStatusChanged NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
sdpBindAdminStatus,
sdpBindOperStatus,
sdpBindOperFlags
}
STATUS current
DESCRIPTION
"The sdpBindStatusChanged notification is generated when there is a
change in the administrative or operating status of an SDP Binding.
Notice that this trap is not generated whenever the SDP Binding
operating status change is caused by an operating status change on the
associated SDP."
::= { sdpTraps 6 }
sdpTlsMacAddrLimitAlarmRaised NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpId,
sdpBindId
}
STATUS current
DESCRIPTION
"The sdpTlsMacAddrLimitAlarmRaised notification is sent whenever the
number of MAC addresses stored in the FDB for this spoke sdp-bind
increases to reach the watermark specified by the object
svcTlsFdbTableFullHighWatermark."
::= { sdpTraps 7 }
sdpTlsMacAddrLimitAlarmCleared NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpId,
sdpBindId
}
STATUS current
DESCRIPTION
"The sdpTlsMacAddrLimitAlarmCleared notification is sent whenever the
number of MAC addresses stored in the FDB for this spoke sdp-bind
drops to the watermark specified by the object
svcTlsFdbTableFullLowWatermark."
::= { sdpTraps 8 }
sdpTlsDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpId,
tlsDhcpPacketProblem
}
STATUS obsolete
DESCRIPTION
"The sdpTlsDHCPSuspiciousPcktRcvd notification is generated when a DHCP
packet is received with suspicious content."
::= { sdpTraps 9 }
sdpBindDHCPLeaseEntriesExceeded NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpLseStateNewCiAddr,
svcDhcpLseStateNewChAddr,
svcDhcpClientLease
}
STATUS current
DESCRIPTION
"The sdpBindDHCPLeaseEntriesExceeded notification is generated when the
number of DHCP lease state entries on a given IES or VRPN spoke-SDP
reaches the user configurable upper limit given by
TIMETRA-VRTR-MIB::vRtrIfDHCPLeasePopulate."
::= { sdpTraps 10 }
sdpBindDHCPLseStateOverride NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpLseStateNewCiAddr,
svcDhcpLseStateNewChAddr,
svcDhcpLseStateOldCiAddr,
svcDhcpLseStateOldChAddr
}
STATUS current
DESCRIPTION
"The sdpBindDHCPLseStateOverride notification is generated when an
existing DHCP lease state is overridden by a new lease state which has
the same IP address but a different MAC address. This trap is only
applicable for IES and VPRN spoke-SDPs."
::= { sdpTraps 11 }
sdpBindDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpPacketProblem
}
STATUS current
DESCRIPTION
"The sdpBindDHCPSuspiciousPcktRcvd notification is generated when a
DHCP packet is received with suspicious content."
::= { sdpTraps 12 }
sdpBindDHCPLseStatePopulateErr NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpLseStatePopulateError
}
STATUS current
DESCRIPTION
"The sdpBindDHCPLseStatePopulateErr notification indicates that the
system was unable to update the DHCP Lease State table with the
information contained in the DHCP ACK message. The DHCP ACK message
has been discarded. This trap is only applicable for IES and VPRN
spoke-SDPs."
::= { sdpTraps 13 }
sdpBindPwPeerStatusBitsChanged NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
sdpBindPwPeerStatusBits
}
STATUS current
DESCRIPTION
"The sdpBindPwPeerStatusBitsChanged notification is generated when
there is a change in the PW status bits received from the peer."
::= { sdpTraps 14 }
sdpBindTlsMacMoveExceeded NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
sdpBindAdminStatus,
sdpBindOperStatus,
sdpBindTlsMacMoveRateExcdLeft,
sdpBindTlsMacMoveNextUpTime,
svcTlsMacMoveMaxRate,
sdpBindNotifyMacAddr
}
STATUS current
DESCRIPTION
"The sdpBindTlsMacMoveExceeded notification is generated when the SDP
exceeds the TLS svcTlsMacMoveMaxRate."
::= { sdpTraps 15 }
sdpBindPwPeerFaultAddrChanged NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
sdpBindPwFaultInetAddressType,
sdpBindPwFaultInetAddress
}
STATUS current
DESCRIPTION
"The sdpBindPwPeerFaultAddrChanged notification is
generated when there is a change in the IP address
included in the PW status message sent by the peer.
This notification is only generated if the IP address
is the only information in the notification that
changed. If the status bits changed as well, then
the sdpBindPwPeerStatusBitsChanged notification will
be generated instead."
::= { sdpTraps 16 }
sdpBindDHCPProxyServerError NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpProxyError
}
STATUS current
DESCRIPTION
"The sdpBindDHCPProxyServerError notification indicates that the system
was unable to proxy DHCP requests."
::= { sdpTraps 17 }
sdpBindDHCPCoAError NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpCoAError
}
STATUS obsolete
DESCRIPTION
"The sdpBindDHCPCoAError notification indicates that the system was
unable to process a Change of Authorization (CoA) request from a
Radius server."
::= { sdpTraps 18 }
sdpBindDHCPSubAuthError NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpSubAuthError
}
STATUS obsolete
DESCRIPTION
"The sdpBindDHCPSubAuthError notification indicates that the system
encountered a problem while trying to authenticate a subscriber."
::= { sdpTraps 19 }
sdpBindSdpStateChangeProcessed NOTIFICATION-TYPE
OBJECTS {
sdpNotifySdpId
}
STATUS current
DESCRIPTION
"The sdpBindSdpStateChangeProcessed notification indicates that the
agent has finished processing an SDP state change event, and that the
operating status of all the affected SDP Bindings has been updated
accordingly. The value of the sdpNotifySdpId object indicates the SDP
that experienced the state change."
::= { sdpTraps 20 }
sdpBindDHCPLseStateMobilityErr NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcDhcpLseStatePopulateError
}
STATUS current
DESCRIPTION
"The sdpBindDHCPLseStateMobilityErr notification indicates that the
system was unable to perform a mobility check for this lease state."
::= { sdpTraps 21 }
sdpBandwidthOverbooked NOTIFICATION-TYPE
OBJECTS {
sdpId,
sdpMaxBookableBandwidth,
sdpBookedBandwidth
}
STATUS current
DESCRIPTION
"The sdpBandwidthOverbooked notification indicates that the bandwidth
that has been allocated to the SDP bindings indicated by
sdpBookedBandwidth exceeds sdpMaxBookableBandwidth."
::= { sdpTraps 22 }
sdpBindInsufficientBandwidth NOTIFICATION-TYPE
OBJECTS {
svcId,
sdpId,
sdpBindId,
sdpAvailableBandwidth,
sdpBindAdminBandwidth
}
STATUS current
DESCRIPTION
"The sdpBindInsufficientBandwidth notification indicates that the
available bandwidth of the SDP is insufficient to satisfy the
bandwidth requirement specified by sdpBindAdminBandwidth of this SDP
binding."
::= { sdpTraps 23 }
dynamicSdpConfigChanged NOTIFICATION-TYPE
OBJECTS {
dynamicSdpOrigin,
sdpId,
svcL2RteSdpBindId,
dynamicSdpStatus
}
STATUS current
DESCRIPTION
"The dynamicSdpConfigChanged notification is generated when a dynamic
SDP is 'created', 'modified', or 'deleted', with the value of
dynamicSdpStatus indicated which state it has entered."
::= { sdpTraps 24 }
dynamicSdpBindConfigChanged NOTIFICATION-TYPE
OBJECTS {
dynamicSdpOrigin,
sdpId,
svcL2RteSdpBindId,
dynamicSdpStatus,
sdpMSPwPeId
}
STATUS current
DESCRIPTION
"The dynamicSdpBindConfigChanged notification is generated when a
dynamic SDP Bind is 'created', 'modified', or 'deleted'. New state
of the SDP Bind is indicated by the value of dynamicSdpStatus. The
affected SDP is indicated by the value of 'sdpId' or by Spoke-SDP FEC
identifier 'sdpMSPwPeId'.
[EFFECT] This is an informational notification. Depending on the type
of change, new layer-2 route may have been created, modified or
deleted.
[RECOVERY] No recovery action is required."
::= { sdpTraps 25 }
dynamicSdpCreationFailed NOTIFICATION-TYPE
OBJECTS {
svcL2RteSdpBindId,
dynamicSdpOrigin,
dynamicSdpCreationError
}
STATUS current
DESCRIPTION
"The dynamicSdpCreationFailed notification is generated when the system
fails to create a dynamic SDP."
::= { sdpTraps 26 }
dynamicSdpBindCreationFailed NOTIFICATION-TYPE
OBJECTS {
svcL2RteSdpBindId,
dynamicSdpOrigin,
sdpId,
pwTemplateLastChanged,
dynamicSdpBindCreationError
}
STATUS current
DESCRIPTION
"The dynamicSdpBindCreationFailed notification is generated when the
system fails to create a dynamic SDP Bind."
::= { sdpTraps 27 }
sdpEgrIfsNetDomInconsCntChanged NOTIFICATION-TYPE
OBJECTS {
sdpEgIfNetDomainInconsCount
}
STATUS current
DESCRIPTION
"The sdpEgrIfsNetDomInconsCntChanged notification is generated when the
value of sdpEgIfNetDomainInconsCount changes."
::= { sdpTraps 28 }
sdpBindIpipeCeIpAddressChange NOTIFICATION-TYPE
OBJECTS {
svcId,
sdpBindId,
sdpBindIpipeCeIpAddrType,
sdpBindIpipeCeIpAddress
}
STATUS current
DESCRIPTION
"[CAUSE] The sdpBindIpipeCeIpAddressChange notification indicates an IP
address has been discovered for the far end CE device on a specified
IPIPE SDP. The type of IP address is specified by
sdpBindIpipeCeIpAddrType. The IP address is specified by
sdpBindIpipeCeIpAddress.
[EFFECT] The IP address specified by sdpBindIpipeCeIpAddress and of
type sdpBindIpipeCeIpAddrType has been discovered on the remote CE
device.
[RECOVERY] No action is required."
::= { sdpTraps 29 }
sdpBindReceivedProtSrcMac NOTIFICATION-TYPE
OBJECTS {
svcId,
sdpBindId,
protectedMacForNotify,
sdpBindTlsRestProtSrcMacAction
}
STATUS current
DESCRIPTION
"[CAUSE] The sdpBindReceivedProtSrcMac notification is generated when a
protected source MAC is received on a TLS SDP-BIND with
sdpBindTlsRestProtSrcMac 'true', or if the TLS SDP-BIND belongs to an
SHG with tlsShgRestProtSrcMac set to 'true'.
[EFFECT] If the sdpBindTlsRestProtSrcMacAction is set to
'discardFrame', the frame will be discarded.
[RECOVERY] No action is required."
::= { sdpTraps 30 }
sdpBindPwLocalStatusBitsChanged NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
sdpBindPwLocalStatusBits
}
STATUS current
DESCRIPTION
"[CAUSE] The sdpBindPwLocalStatusBitsChanged notification is generated
when there is a change in the local PW status bits.
[EFFECT] Based on the change in the sdpBindPwLocalStatusBits traffic
on the SDP-BIND may be impacted.
[RECOVERY] Based on the change in the sdpBindPwLocalStatusBits
appropriate configuration changes may be required."
::= { sdpTraps 31 }
sdpBindTlsMacMoveExceedNonBlock NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
svcVpnId,
sdpBindId,
svcTlsMacMoveMaxRate,
sdpBindNotifyMacAddr
}
STATUS current
DESCRIPTION
"[CAUSE] The sdpBindTlsMacMoveExceedNonBlock notification is generated
when the SDP exceeds the TLS svcTlsMacMoveMaxRate even when
sdpBindTlsLimitMacMove is set to 'nonBlocking'.In case of Provider
Backbone Bridging (PBB), if the MAC address that exceeds the rate is
in ISID-VPLS(iVpls) FDB and sdp binding that detects the move is in
Backbone-VPLS(bVpls), the notification will be generated with svcId,
custId of I-VPLS and B-VPLS sdpBindId.
[EFFECT] This notification is informational only.
[RECOVERY] User can adjust the value of svcTlsMacMoveMaxRate to reduce
the frequency of this notification."
::= { sdpTraps 32 }
sdpBindEthLoopbackStarted NOTIFICATION-TYPE
OBJECTS {
sdpBindEthLoopbackMode,
sdpBindEthLoopbackMacSwap,
sdpBindEthLoopbackMacSwapAddr,
sdpBindEthLoopbackMacSwapAddrAll
}
STATUS current
DESCRIPTION
"[CAUSE] The sdpBindEthLoopbackStarted notification is generated when
the SDP binding is placed into loopback.
[EFFECT] This notification is informational only."
::= { sdpTraps 33 }
sdpBindEthLoopbackStopped NOTIFICATION-TYPE
OBJECTS {
sdpBindEthLoopbackMode
}
STATUS current
DESCRIPTION
"[CAUSE] The sdpBindEthLoopbackStopped notification is generated when
the SDP binding is removed from loopback.
[EFFECT] This notification is informational only."
::= { sdpTraps 34 }
sdpPbbActvPwWithNonActvCtrlPwChg NOTIFICATION-TYPE
OBJECTS {
sdpId,
sdpPbbActvPwWithNonActvCtrlPw
}
STATUS current
DESCRIPTION
"[CAUSE] The sdpPbbActvPwWithNonActvCtrlPwChg notification is generated
when last pseudo-wire (PW) goes standby or down and when first PW
becomes active on the Backbone Edge Bridge (BEB) where control PW is
standby or down on that SDP.
[EFFECT] There is a change which caused last active PW to become
standby or down and when first PW becomes active.
[RECOVERY] sdpPbbActvPwWithNonActvCtrlPwChg event with
sdpPbbActvPwWithNonActvCtrlPw set to 'false' indicate clearing of
sdpPbbActvPwWithNonActvCtrlPwChg with sdpPbbActvPwWithNonActvCtrlPw
set to 'true'."
::= { sdpTraps 35 }
sdpControlPwActiveStateChg NOTIFICATION-TYPE
OBJECTS {
sdpControlPWIsActive
}
STATUS current
DESCRIPTION
"[CAUSE] The sdpControlPwActiveStateChg notification is generated when
the SDP control PW Active value changes on that SDP.
[EFFECT] Control pseudo-wire state change could affect related SDP
bindings.
[RECOVERY] A change in the configuration may be required."
::= { sdpTraps 36 }
sdpBindReceivedPbbProtSrcMac NOTIFICATION-TYPE
OBJECTS {
svcTlsBackboneVplsSvcId,
sdpBindId,
protectedMacForNotify
}
STATUS current
DESCRIPTION
"[CAUSE] The sdpBindReceivedPbbProtSrcMac notification is generated
when a source MAC is protected in a i-vpls is received on SDP-BIND of
a b-vpls (svcTlsBackboneVplsSvcId) service.
[EFFECT] The frame will be discarded.
[RECOVERY] No action is required."
::= { sdpTraps 37 }
unacknowledgedTCN NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpId
}
STATUS current
DESCRIPTION
"The unacknowledgedTCN notification is generated when a
TCN sent towards the root bridge on the root port (SAP
or SDP binding) has not been acknowledged within the
allowed time. A portion of the spanning tree topology
may not have been notified that a topology change has
taken place. FDB tables on some devices may take
significantly longer to represent the new distribution
of layer-2 addresses. Examine this device and devices
towards the root bridge for STP issues."
::= { tstpTraps 8 }
tmnxSvcTopoChgSdpBindMajorState NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
sdpBindTlsStpPortState,
tmnxOldSdpBindTlsStpPortState
}
STATUS current
DESCRIPTION
"The tmnxSvcTopoChgSdpBindMajorState notification is
generated when a SDP binding has transitioned its
state from learning to forwarding or from forwarding
to blocking or broken. The spanning tree topology has
been modified. It may denote loss of customer access
or redundancy. Check the new topology against the
provisioned topology to determine the severity of
connectivity loss."
::= { tstpTraps 14 }
tmnxSvcNewRootSdpBind NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
svcTlsStpDesignatedRoot
}
STATUS current
DESCRIPTION
"The tmnxSvcNewRootSdpBind notification is generated
when the previous root bridge has been aged out and a
new root bridge has been elected. The new root bridge
creates a new spanning tree topology. It may denote
loss of customer access or redundancy. Check the new
topology against the provisioned topology to determine
the severity of connectivity loss."
::= { tstpTraps 15 }
tmnxSvcTopoChgSdpBindState NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
sdpBindTlsStpPortState,
tmnxOldSdpBindTlsStpPortState
}
STATUS current
DESCRIPTION
"The tmnxSvcTopoChgSdpBindState notification is
generated when a SDP binding has transitioned state to
blocking or broken from learning state. This event
complements what is not covered by
tmnxSvcTopoChgSdpBindMajorState. The spanning tree
topology has been modified. It may denote loss of
customer access or redundancy. Check the new topology
against the provisioned topology to determine the
severity of connectivity loss."
::= { tstpTraps 16 }
tmnxSvcSdpBindRcvdTCN NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId
}
STATUS current
DESCRIPTION
"The tmnxSvcSdpBindRcvdTCN notification is generated
when a SDP binding has received TCN from another
bridge. This bridge will either have its configured
BPDU with the topology change flag set if it is a root
bridge, or it will pass TCN to its root bridge.
Eventually the address aging timer for the forwarding
database will be made shorter for a short period of
time. No recovery is needed."
::= { tstpTraps 17 }
tmnxSvcSdpBindRcvdHigherBriPrio NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
tmnxCustomerBridgeId,
tmnxCustomerRootBridgeId
}
STATUS current
DESCRIPTION
"The tmnxSvcSdpBindRcvdHigherBriPrio notification is
generated when a customer's device has been configured
with a bridge priority equal to zero. The SDP binding
that the customer's device is connected through will
be blocked. Remove the customer's device or
reconfigure the customer's bridge priority with value
greater than zero."
::= { tstpTraps 18 }
tmnxSvcSdpBindEncapPVST NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
tmnxOtherBridgeId
}
STATUS current
DESCRIPTION
"The tmnxSvcSdpBindEncapPVST notification is generated
when an SDP bindings STP received a BPDU that was PVST
encapsulated. The SDP binding STP's BPDUs will be PVST
encapsulated. No recovery is needed."
::= { tstpTraps 19 }
tmnxSvcSdpBindEncapDot1d NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
tmnxOtherBridgeId
}
STATUS current
DESCRIPTION
"The tmnxSvcSdpBindEncapDot1d notification is generated
when a SDP binding received a BPDU that was 802.1d
encapsulated. The SDP binding BPDUs will also be
802.1d encapsulated. No recovery is needed."
::= { tstpTraps 20 }
tmnxSvcSdpActiveProtocolChange NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
sdpBindTlsStpOperProtocol
}
STATUS current
DESCRIPTION
"The tmnxSvcSdpActiveProtocolChange notification is
generated when the spanning tree protocol on this SDP
changes from rstp to stp or vise versa. No recovery is
needed."
::= { tstpTraps 31 }
svcTlsBgpADPWTempBindTblLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcTlsBgpADPWTempBindTblLC indicates the sysUpTime at the
time of the last modification of svcTlsBgpADPWTempBindTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSvcObjs 32 }
svcTlsBgpADPWTempBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF SvcTlsBgpADPWTempBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"svcTlsBgpADPWTempBindTable contains entries for the associations
between SDP Auto-Bind policies and a BGP Auto-Discovery context for a
VPLS service."
::= { tmnxSvcObjs 33 }
svcTlsBgpADPWTempBindEntry OBJECT-TYPE
SYNTAX SvcTlsBgpADPWTempBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A SDP Auto-Bind Policy entry in the svcTlsBgpADPWTempBindTable."
INDEX {
svcId,
pwTemplateId
}
::= { svcTlsBgpADPWTempBindTable 1 }
SvcTlsBgpADPWTempBindEntry ::= SEQUENCE
{
svcTlsBgpADPWTempBindRowStatus RowStatus,
svcTlsBgpADPWTempBindLastChngd TimeStamp,
svcTlsBgpADPWTempBindSHG TNamedItemOrEmpty,
svcTlsBgpADPWTempBindOperGrp TNamedItemOrEmpty,
svcTlsBgpADPWTempBindCreatOrigin TmnxCreateOrigin,
svcTlsBgpADPWTempBindBfdTemplate TNamedItemOrEmpty,
svcTlsBgpADPWTempBindBfdEnable TruthValue,
svcTlsBgpADPWTempBindBfdEncap TmnxBfdEncap,
svcTlsBgpADPWTempBindMonOperGrp TNamedItemOrEmpty
}
svcTlsBgpADPWTempBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of svcTlsBgpADPWTempBindRowStatus is used for the creation
and deletion of associations between SDP Auto-Bind policies and a BGP
Auto-Discovery context for a VPLS service."
::= { svcTlsBgpADPWTempBindEntry 1 }
svcTlsBgpADPWTempBindLastChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcTlsBgpADPWTempBindLastChngd indicates the sysUpTime at
the time of the last modification of this entry.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { svcTlsBgpADPWTempBindEntry 2 }
svcTlsBgpADPWTempBindSHG OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of svcTlsBgpADPWTempBindSHG specifies the split-horizon
group to associate with the SDP Auto-Bind policy in this BGP
Auto-Discovery context in a VPLS service.
When this Auto-Bind policy is used to create an SDP, this
split-horizon group will be associated with the SDP.
The name specified must correspond to an existing split-horizon group
in the VPLS service, otherwise an 'inconsistentValue' error will be
returned."
DEFVAL { "" }
::= { svcTlsBgpADPWTempBindEntry 3 }
svcTlsBgpADPWTempBindOperGrp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the svcTlsBgpADPWTempBindOperGrp specifies the
Operational-Group identifier associated with this pseudo-wire template
binding."
DEFVAL { "" }
::= { svcTlsBgpADPWTempBindEntry 4 }
svcTlsBgpADPWTempBindCreatOrigin OBJECT-TYPE
SYNTAX TmnxCreateOrigin
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcTlsBgpADPWTempBindCreatOrigin indicates the mechanism
used to create this entry."
DEFVAL { manual }
::= { svcTlsBgpADPWTempBindEntry 5 }
svcTlsBgpADPWTempBindBfdTemplate OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the svcTlsBgpADPWTempBindBfdTemplate specifies the BFD
template name associated with this pseudo-wire template binding."
DEFVAL { "" }
::= { svcTlsBgpADPWTempBindEntry 6 }
svcTlsBgpADPWTempBindBfdEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of svcTlsBgpADPWTempBindBfdEnable specifies whether BFD is
enabled on this pseudo-wire template binding."
DEFVAL { false }
::= { svcTlsBgpADPWTempBindEntry 7 }
svcTlsBgpADPWTempBindBfdEncap OBJECT-TYPE
SYNTAX TmnxBfdEncap
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of svcTlsBgpADPWTempBindBfdEncap specifies the BFD
encapsulation used on this pseudo-wire template binding."
DEFVAL { ipv4 }
::= { svcTlsBgpADPWTempBindEntry 8 }
svcTlsBgpADPWTempBindMonOperGrp OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the svcTlsBgpADPWTempBindMonOperGrp specifies the
monitoring operational-group identifier associated with this
pseudo-wire template binding."
DEFVAL { "" }
::= { svcTlsBgpADPWTempBindEntry 9 }
svcTlsBgpADPWTempBindRTTblLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcTlsBgpADPWTempBindRTTblLC indicates the sysUpTime at
the time of the last modification of svcTlsBgpADPWTempBindRTTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSvcObjs 34 }
svcTlsBgpADPWTempBindRTTable OBJECT-TYPE
SYNTAX SEQUENCE OF SvcTlsBgpADPWTempBindRTEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"svcTlsBgpADPWTempBindTable contains entries for Route Targets
associated with a SDP Auto-Bind policy and a BGP Auto-Discovery
context for a VPLS service."
::= { tmnxSvcObjs 35 }
svcTlsBgpADPWTempBindRTEntry OBJECT-TYPE
SYNTAX SvcTlsBgpADPWTempBindRTEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A SDP Auto-Bind Policy Route Target entry in the
svcTlsBgpADPWTempBindRTTable."
INDEX {
svcId,
pwTemplateId,
IMPLIED svcTlsBgpADPWTempBindRT
}
::= { svcTlsBgpADPWTempBindRTTable 1 }
SvcTlsBgpADPWTempBindRTEntry ::= SEQUENCE
{
svcTlsBgpADPWTempBindRT TNamedItem,
svcTlsBgpADPWTempBindRTRowStat RowStatus
}
svcTlsBgpADPWTempBindRT OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcTlsBgpADPWTempBindRT is the Route Target associated
with a PW template and a BGP Auto-Discovery context for a VPLS
service.
When advertisements are received with this Route Target, the PW
template specified by the index, pwTemplateId, will be used to create
the SDP."
::= { svcTlsBgpADPWTempBindRTEntry 1 }
svcTlsBgpADPWTempBindRTRowStat OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of svcTlsBgpADPWTempBindRTRowStat is used for the
association of Route Targets with a SDP Auto-Bind policy and a BGP
Auto-Discovery context for a VPLS service."
::= { svcTlsBgpADPWTempBindRTEntry 2 }
tmnxStpMeshNotInMstRegion NOTIFICATION-TYPE
OBJECTS {
svcId,
sdpBindId
}
STATUS current
DESCRIPTION
"The tmnxStpMeshNotInMstRegion notification is generated when a MSTP
BPDU from outside the MST region is received on the indicated mesh
SDP.
It is up to the operator to make sure bridges connected via mesh SDPs
are in the same MST-region. If not the mesh will NOT become
operational."
::= { tstpTraps 36 }
svcL2RteTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2RteTableLastChanged indicates the sysUpTime at the
time of the last modification of svcL2RteTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSvcObjs 38 }
tmnxSdpBndStpExcepCondStateChng NOTIFICATION-TYPE
OBJECTS {
custId,
svcId,
sdpBindId,
sdpBindTlsStpException
}
STATUS current
DESCRIPTION
"The tmnxSdpBndStpExcepCondStateChng notification is generated when the
value of the object sdpBindTlsStpException has changed, i.e. when the
exception condition changes on the indicated SDP Bind."
::= { tstpTraps 38 }
svcL2RteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SvcL2RteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"svcL2RteTable contains entries for L2 routes."
::= { tmnxSvcObjs 39 }
svcL2RteEntry OBJECT-TYPE
SYNTAX SvcL2RteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An L2 route entry in the svcL2RteTable."
INDEX {
svcId,
svcL2RteVsiPrefix,
svcL2RteRouteDistinguisher,
svcL2RteNextHopType,
svcL2RteNextHop
}
::= { svcL2RteTable 1 }
SvcL2RteEntry ::= SEQUENCE
{
svcL2RteVsiPrefix Unsigned32,
svcL2RteRouteDistinguisher TmnxVPNRouteDistinguisher,
svcL2RteNextHopType InetAddressType,
svcL2RteNextHop InetAddress,
svcL2RteSdpBindId SdpBindId,
svcL2RtePwTemplateId PWTemplateId,
svcL2RteError DisplayString,
svcL2RteLastErrorTime TimeStamp,
svcL2RteStatus INTEGER
}
svcL2RteVsiPrefix OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcL2RteVsiPrefix is the low-order 4 bytes
of the Virtual Switch Instance identifier (VSI-id) of the
remote VSI for this L2 route."
::= { svcL2RteEntry 1 }
svcL2RteRouteDistinguisher OBJECT-TYPE
SYNTAX TmnxVPNRouteDistinguisher
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcL2RteRouteDistinguisher is the high-order
6 bytes of the Virtual Switch Instance identifier (VSI-id)
of the remote VSI for this L2 route."
::= { svcL2RteEntry 2 }
svcL2RteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcL2RteNextHopType indicates the address type of
svcL2RteNextHop."
::= { svcL2RteEntry 3 }
svcL2RteNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcL2RteNextHop indicates the IP next hop
for this L2 route. This value is equivalent to the
IP address of the Far End of this L2 route."
::= { svcL2RteEntry 4 }
svcL2RteSdpBindId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2RteSdpBindId indicates the SDP bind ID of the SDP
bind that binds this VPLS context to the VSI indicated by
svcL2RteRouteDistinguisher, svcL2RteVsiPrefix, and svcL2RteNextHop.
The value of svcL2RteSdpBindId will be '0000000000000000'H if there
was an error in creating the L2 route and the svcL2RteError will
contain a string describing the error."
::= { svcL2RteEntry 5 }
svcL2RtePwTemplateId OBJECT-TYPE
SYNTAX PWTemplateId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2RtePwTemplateId indicates the PW template associated
with the SDP bind that binds this VPLS context to the VSI indicated by
svcL2RteRouteDistinguisher, svcL2RteVsiPrefix, and svcL2RteNextHop."
::= { svcL2RteEntry 6 }
svcL2RteError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2RteError indicates an error message describing an
error encountered when establishing this L2 route entry. The value of
svcL2RteError will be a zero-length string when the L2 route is
successfully established."
DEFVAL { "" }
::= { svcL2RteEntry 7 }
svcL2RteLastErrorTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2RteLastErrorTime indicates the sysUpTime at the time
of the last error for this L2 route entry.
If no errors were encountered for this entry since the last
re-initialization of the local network management subsystem, then this
object contains a zero value."
DEFVAL { 0 }
::= { svcL2RteEntry 8 }
svcL2RteStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2RteStatus indicates the status of the this L2 Route."
::= { svcL2RteEntry 9 }
svcL2BgpVplsRteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SvcL2BgpVplsRteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"svcL2BgpVplsRteTable contains entries for L2 routes."
::= { tmnxSvcObjs 84 }
svcL2BgpVplsRteEntry OBJECT-TYPE
SYNTAX SvcL2BgpVplsRteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An L2 route entry in the svcL2BgpVplsRteTable."
INDEX {
svcId,
svcL2BgpVplsRteVeId,
svcL2BgpVplsRteRD,
svcL2BgpVplsRteNextHopType,
svcL2BgpVplsRteNextHop
}
::= { svcL2BgpVplsRteTable 1 }
SvcL2BgpVplsRteEntry ::= SEQUENCE
{
svcL2BgpVplsRteVeId TmnxSiteId,
svcL2BgpVplsRteRD TmnxVPNRouteDistinguisher,
svcL2BgpVplsRteNextHopType InetAddressType,
svcL2BgpVplsRteNextHop InetAddress,
svcL2BgpVplsRteSdpBindId SdpBindId,
svcL2BgpVplsRtePwTemplateId PWTemplateId,
svcL2BgpVplsRteError DisplayString,
svcL2BgpVplsRteLastErrorTime TimeStamp,
svcL2BgpVplsRteControlWord Unsigned32,
svcL2BgpVplsRtePathMtu Integer32,
svcL2BgpVplsRteState INTEGER,
svcL2BgpVplsRteSeqDelivery Unsigned32,
svcL2BgpVplsRteDF TruthValue,
svcL2BgpVplsRteStatus INTEGER
}
svcL2BgpVplsRteVeId OBJECT-TYPE
SYNTAX TmnxSiteId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRteVeId is the low-order 4 bytes
of the Virtual Switch Instance identifier (VSI-id) of the
remote VSI for this L2 route."
::= { svcL2BgpVplsRteEntry 1 }
svcL2BgpVplsRteRD OBJECT-TYPE
SYNTAX TmnxVPNRouteDistinguisher
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRteRD is the high-order
6 bytes of the Virtual Switch Instance identifier (VSI-id)
of the remote VSI for this L2 route."
::= { svcL2BgpVplsRteEntry 2 }
svcL2BgpVplsRteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRteNextHopType indicates the address type of
svcL2BgpVplsRteNextHop."
::= { svcL2BgpVplsRteEntry 3 }
svcL2BgpVplsRteNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRteNextHop indicates the IP next hop
for this L2 route. This value is equivalent to the
IP address of the Far End of this L2 route."
::= { svcL2BgpVplsRteEntry 4 }
svcL2BgpVplsRteSdpBindId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRteSdpBindId indicates the SDP bind ID of the
SDP bind that binds this VPLS context to the VSI indicated by
svcL2BgpVplsRteRD, svcL2BgpVplsRteVeId, and svcL2BgpVplsRteNextHop.
The value of svcL2BgpVplsRteSdpBindId will be '0000000000000000'H if
there was an error in creating the L2 route and the
svcL2BgpVplsRteError will contain a string describing the error."
::= { svcL2BgpVplsRteEntry 5 }
svcL2BgpVplsRtePwTemplateId OBJECT-TYPE
SYNTAX PWTemplateId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRtePwTemplateId indicates the PW template
associated with the SDP bind that binds this VPLS context to the VSI
indicated by svcL2BgpVplsRteRD, svcL2BgpVplsRteVeId, and
svcL2BgpVplsRteNextHop."
::= { svcL2BgpVplsRteEntry 6 }
svcL2BgpVplsRteError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRteError indicates an error message
describing an error encountered when establishing this L2 route entry.
The value of svcL2BgpVplsRteError will be a zero-length string when
the L2 route is successfully established."
DEFVAL { "" }
::= { svcL2BgpVplsRteEntry 7 }
svcL2BgpVplsRteLastErrorTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRteLastErrorTime indicates the sysUpTime at
the time of the last error for this L2 route entry.
If no errors were encountered for this entry since the last
re-initialization of the local network management subsystem, then this
object contains a zero value."
DEFVAL { 0 }
::= { svcL2BgpVplsRteEntry 8 }
svcL2BgpVplsRteControlWord OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRteControlWord indicates the control word
advertised for this route."
::= { svcL2BgpVplsRteEntry 9 }
svcL2BgpVplsRtePathMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRtePathMtu indicates the layer-2 path MTU for
the pseudo-wire to the PE for this route."
::= { svcL2BgpVplsRteEntry 10 }
svcL2BgpVplsRteState OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRteState indicates state of the object for
this route."
::= { svcL2BgpVplsRteEntry 11 }
svcL2BgpVplsRteSeqDelivery OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRteSeqDelivery indicates the
sequenced delivery flag advertised for this route."
::= { svcL2BgpVplsRteEntry 12 }
svcL2BgpVplsRteDF OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRteDF indicates the value of DF bit
associated with this BGP VPLS L2 route entry."
::= { svcL2BgpVplsRteEntry 13 }
svcL2BgpVplsRteStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVplsRteStatus indicates the status of the this
BGP VPLS L2 Route."
::= { svcL2BgpVplsRteEntry 14 }
svcVllBgpADPWTempBindTblLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcVllBgpADPWTempBindTblLC indicates the sysUpTime at the
time of the last modification of svcVllBgpADPWTempBindTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSvcObjs 143 }
svcVllBgpADPWTempBindTable OBJECT-TYPE
SYNTAX SEQUENCE OF SvcVllBgpADPWTempBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"svcVllBgpADPWTempBindTable contains entries for the associations
between SDP Auto-Bind policies and a BGP Auto-Discovery context for a
VLL service."
::= { tmnxSvcObjs 144 }
svcVllBgpADPWTempBindEntry OBJECT-TYPE
SYNTAX SvcVllBgpADPWTempBindEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A SDP Auto-Bind Policy entry in the svcVllBgpADPWTempBindTable."
INDEX {
svcId,
pwTemplateId
}
::= { svcVllBgpADPWTempBindTable 1 }
SvcVllBgpADPWTempBindEntry ::= SEQUENCE
{
svcVllBgpADPWTempBindRowStatus RowStatus,
svcVllBgpADPWTempBindLastChngd TimeStamp,
svcVllBgpADPWTempBindEndPt TNamedItemOrEmpty,
svcVllBgpADPWTempBindBfdTemplate TNamedItemOrEmpty,
svcVllBgpADPWTempBindBfdEnable TruthValue,
svcVllBgpADPWTempBindBfdEncap TmnxBfdEncap
}
svcVllBgpADPWTempBindRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of svcVllBgpADPWTempBindRowStatus is used for the creation
and deletion of associations between SDP Auto-Bind policies and a BGP
Auto-Discovery context for a VLL service."
::= { svcVllBgpADPWTempBindEntry 1 }
svcVllBgpADPWTempBindLastChngd OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcVllBgpADPWTempBindLastChngd indicates the sysUpTime at
the time of the last modification of this entry.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { svcVllBgpADPWTempBindEntry 2 }
svcVllBgpADPWTempBindEndPt OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the svcVllBgpADPWTempBindEndPt specifies the endpoint
associated with this pseudo-wire template binding."
DEFVAL { "" }
::= { svcVllBgpADPWTempBindEntry 3 }
svcVllBgpADPWTempBindBfdTemplate OBJECT-TYPE
SYNTAX TNamedItemOrEmpty
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of the svcVllBgpADPWTempBindBfdTemplate specifies the BFD
template name associated with this pseudo-wire template binding."
DEFVAL { "" }
::= { svcVllBgpADPWTempBindEntry 4 }
svcVllBgpADPWTempBindBfdEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of svcVllBgpADPWTempBindBfdEnable specifies whether BFD is
enabled on this pseudo-wire template binding."
DEFVAL { false }
::= { svcVllBgpADPWTempBindEntry 5 }
svcVllBgpADPWTempBindBfdEncap OBJECT-TYPE
SYNTAX TmnxBfdEncap
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of svcVllBgpADPWTempBindBfdEncap specifies the BFD
encapsulation used on this pseudo-wire template binding."
DEFVAL { ipv4 }
::= { svcVllBgpADPWTempBindEntry 6 }
svcVllBgpADPWTempBindRTTblLC OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcVllBgpADPWTempBindRTTblLC indicates the sysUpTime at
the time of the last modification of svcVllBgpADPWTempBindRTTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value."
::= { tmnxSvcObjs 145 }
svcVllBgpADPWTempBindRTTable OBJECT-TYPE
SYNTAX SEQUENCE OF SvcVllBgpADPWTempBindRTEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"svcVllBgpADPWTempBindTable contains entries for Route Targets
associated with a SDP Auto-Bind policy and a BGP Auto-Discovery
context for a VLL service."
::= { tmnxSvcObjs 146 }
svcVllBgpADPWTempBindRTEntry OBJECT-TYPE
SYNTAX SvcVllBgpADPWTempBindRTEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A SDP Auto-Bind Policy Route Target entry in the
svcVllBgpADPWTempBindRTTable."
INDEX {
svcId,
pwTemplateId,
IMPLIED svcVllBgpADPWTempBindRT
}
::= { svcVllBgpADPWTempBindRTTable 1 }
SvcVllBgpADPWTempBindRTEntry ::= SEQUENCE
{
svcVllBgpADPWTempBindRT TNamedItem,
svcVllBgpADPWTempBindRTRowStat RowStatus
}
svcVllBgpADPWTempBindRT OBJECT-TYPE
SYNTAX TNamedItem
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcVllBgpADPWTempBindRT is the Route Target associated
with a PW template and a BGP Auto-Discovery context for a VLL service.
When advertisements are received with this Route Target, the PW
template specified by the index, pwTemplateId, will be used to create
the SDP."
::= { svcVllBgpADPWTempBindRTEntry 1 }
svcVllBgpADPWTempBindRTRowStat OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of svcVllBgpADPWTempBindRTRowStat is used for the
association of Route Targets with a SDP Auto-Bind policy and a BGP
Auto-Discovery context for a VLL service."
::= { svcVllBgpADPWTempBindRTEntry 2 }
svcL2BgpVpwsRteTable OBJECT-TYPE
SYNTAX SEQUENCE OF SvcL2BgpVpwsRteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The svcL2BgpVpwsRteTable contains entries for BGP VPWS (Virtual
Private Wire Service) L2 routes."
::= { tmnxSvcObjs 147 }
svcL2BgpVpwsRteEntry OBJECT-TYPE
SYNTAX SvcL2BgpVpwsRteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The svcL2BgpVpwsRteEntry is an BGP VPWS L2 route entry in the
svcL2BgpVpwsRteTable."
INDEX {
svcId,
svcL2BgpVpwsRteVeId,
svcL2BgpVpwsRteRD,
svcL2BgpVpwsRteNextHopType,
svcL2BgpVpwsRteNextHop
}
::= { svcL2BgpVpwsRteTable 1 }
SvcL2BgpVpwsRteEntry ::= SEQUENCE
{
svcL2BgpVpwsRteVeId TmnxSiteId,
svcL2BgpVpwsRteRD TmnxVPNRouteDistinguisher,
svcL2BgpVpwsRteNextHopType InetAddressType,
svcL2BgpVpwsRteNextHop InetAddress,
svcL2BgpVpwsRteSdpBindId SdpBindId,
svcL2BgpVpwsRtePwTemplateId PWTemplateId,
svcL2BgpVpwsRteError DisplayString,
svcL2BgpVpwsRteLastErrorTime TimeStamp,
svcL2BgpVpwsRteControlWord Unsigned32,
svcL2BgpVpwsRtePathMtu Integer32,
svcL2BgpVpwsRteState INTEGER,
svcL2BgpVpwsRteSeqDelivery Unsigned32,
svcL2BgpVpwsRteStatus INTEGER,
svcL2BgpVpwsRteCsv Unsigned32,
svcL2BgpVpwsRteTxStatus INTEGER,
svcL2BgpVpwsRtePreference Unsigned32
}
svcL2BgpVpwsRteVeId OBJECT-TYPE
SYNTAX TmnxSiteId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteVeId is the low-order 4 bytes of the
Virtual Switch Instance identifier (VSI-id) of the remote VSI for this
L2 route."
::= { svcL2BgpVpwsRteEntry 1 }
svcL2BgpVpwsRteRD OBJECT-TYPE
SYNTAX TmnxVPNRouteDistinguisher
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteRD is the high-order 6 bytes of the
Virtual Switch Instance identifier (VSI-id) of the remote VSI for this
L2 route."
::= { svcL2BgpVpwsRteEntry 2 }
svcL2BgpVpwsRteNextHopType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteNextHopType indicates the address type of
svcL2BgpVpwsRteNextHop."
::= { svcL2BgpVpwsRteEntry 3 }
svcL2BgpVpwsRteNextHop OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteNextHop indicates the IP next hop for this
L2 route. This value is equivalent to the IP address of the Far End of
this L2 route."
::= { svcL2BgpVpwsRteEntry 4 }
svcL2BgpVpwsRteSdpBindId OBJECT-TYPE
SYNTAX SdpBindId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteSdpBindId indicates the SDP bind ID of the
SDP bind that binds this VPWS context to the VSI indicated by
svcL2BgpVpwsRteRD, svcL2BgpVpwsRteVeId, and svcL2BgpVpwsRteNextHop.
The value of svcL2BgpVpwsRteSdpBindId will be '0000000000000000'H if
there was an error in creating the L2 route and the
svcL2BgpVpwsRteError will contain a string describing the error."
::= { svcL2BgpVpwsRteEntry 5 }
svcL2BgpVpwsRtePwTemplateId OBJECT-TYPE
SYNTAX PWTemplateId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRtePwTemplateId indicates the PW template
associated with the SDP bind that binds this VPWS context to the VSI
indicated by svcL2BgpVpwsRteRD, svcL2BgpVpwsRteVeId, and
svcL2BgpVpwsRteNextHop."
::= { svcL2BgpVpwsRteEntry 6 }
svcL2BgpVpwsRteError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteError indicates an error message
describing an error encountered when establishing this L2 route entry.
The value of svcL2BgpVpwsRteError will be a zero-length string when
the L2 route is successfully established."
DEFVAL { "" }
::= { svcL2BgpVpwsRteEntry 7 }
svcL2BgpVpwsRteLastErrorTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteLastErrorTime indicates the sysUpTime at
the time of the last error for this L2 route entry.
If no errors were encountered for this entry since the last
re-initialization of the local network management subsystem, then this
object contains a zero value."
DEFVAL { 0 }
::= { svcL2BgpVpwsRteEntry 8 }
svcL2BgpVpwsRteControlWord OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteControlWord indicates the control word
advertised for this route."
::= { svcL2BgpVpwsRteEntry 9 }
svcL2BgpVpwsRtePathMtu OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRtePathMtu indicates the layer-2 path MTU for
the pseudo-wire to the PE for this route."
::= { svcL2BgpVpwsRteEntry 10 }
svcL2BgpVpwsRteState OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteState indicates state of the object for
this route."
::= { svcL2BgpVpwsRteEntry 11 }
svcL2BgpVpwsRteSeqDelivery OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteSeqDelivery indicates the sequenced
delivery flag advertised for this route."
::= { svcL2BgpVpwsRteEntry 12 }
svcL2BgpVpwsRteStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteStatus indicates the status of the this
BGP VPWS L2 Route."
::= { svcL2BgpVpwsRteEntry 13 }
svcL2BgpVpwsRteCsv OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteCsv indicates the circuit status vector
for this route."
::= { svcL2BgpVpwsRteEntry 14 }
svcL2BgpVpwsRteTxStatus OBJECT-TYPE
SYNTAX INTEGER {
active (1),
inactive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRteTxStatus indicates the transmit side
status of the this BGP VPWS L2 Route."
::= { svcL2BgpVpwsRteEntry 15 }
svcL2BgpVpwsRtePreference OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of svcL2BgpVpwsRtePreference indicates the preference value
for this route."
::= { svcL2BgpVpwsRteEntry 16 }
END