mibs/MIBS/nokia/aos7/ALCATEL-IND1-QOS-MIB

9536 lines
311 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
ALCATEL-IND1-QOS-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE, OBJECT-IDENTITY, MODULE-IDENTITY,
Counter32, Counter64, Integer32, IpAddress, Unsigned32
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
MacAddress, RowStatus
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
softentIND1QoS
FROM ALCATEL-IND1-BASE
Ipv6Address, Ipv6IfIndexOrZero
FROM IPV6-TC
InterfaceIndex
FROM IF-MIB
InetAddressType, InetAddress
FROM INET-ADDRESS-MIB;
alaQoSMIB MODULE-IDENTITY
LAST-UPDATED "201408210000Z"
ORGANIZATION "Alcatel IND"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"QoS and Filtering MIB"
REVISION "201407140000Z"
DESCRIPTION
"Added alaQoSV6NetworkGroupTable and alaQoSAppliedV6NetworkGroupTable"
::= { softentIND1QoS 1 }
-- FILE: ALCATEL-IND1-QOS-MIB.mib
-- Alcatel
-- Architects Of An Internet World
-- This module provides authoritative enterprise-specific Simple Network
-- Management Protocol (SNMP) Management Information Base (MIB) definitions.
-- The right to make changes in specification and other information contained
-- in this document without prior notice is reserved.
-- No liability shall be assumed for any incidental, indirect, special, or
-- consequential damages whatsoever arising from or related to this document or
-- the information contained herein.
-- Vendors, end-users, and other interested parties are granted non-exclusive
-- license to use this specification in connection with management of the
-- products for which it is intended to be used.
-- Please consult with Customer Service to ensure the most appropriate version
-- of this document is used with the products in question:
-- Alcatel-Lucent, Enterprise Solutions Division
-- (Formerly Alcatel Internetworking, Incorporated)
-- 26801 West Agoura Road
-- Calabasas, CA 91301
-- United States Of America
-- Telephone: North America 800.995.2696
-- Latin America 877.919.9526
-- Europe 31.23.556.0100
-- Asia 65.394.7933
-- All Other 818.878.4507
-- Electronic Mail: support@ind.alcatel.com
-- World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
-- File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs
-- Copyright (C) 1995-2007 Alcatel-Lucent
-- ALL RIGHTS RESERVED WORLDWIDE
alaQoSMIBObjects OBJECT-IDENTITY
STATUS current
DESCRIPTION "Branch for QoS Managed Objects."
::= { alaQoSMIB 1 }
--
-- Definition of rule table
--
alaQoSRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS Rule definitions"
::= { alaQoSMIBObjects 1 }
alaQoSRuleEntry OBJECT-TYPE
SYNTAX QoSRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS Rule"
INDEX {
alaQoSRuleName
}
::= { alaQoSRuleTable 1 }
QoSRuleEntry ::=
SEQUENCE
{
alaQoSRuleName SnmpAdminString,
alaQoSRuleEnabled INTEGER,
alaQoSRuleSource INTEGER,
alaQoSRulePrecedence Integer32,
alaQoSRuleCondition SnmpAdminString,
alaQoSRuleAction SnmpAdminString,
alaQoSRuleReflexive INTEGER,
alaQoSRuleSave INTEGER,
alaQoSRuleLog INTEGER,
alaQoSRuleEnforced INTEGER,
alaQoSRuleActive INTEGER,
alaQoSRuleRowStatus RowStatus,
alaQoSRuleValidityPeriod SnmpAdminString,
alaQoSRuleValidityPeriodStatus INTEGER,
alaQoSRuleLogInterval Integer32,
alaQoSRuleCountType INTEGER,
alaQoSRulePacketCount Counter64,
alaQoSRuleByteCount Counter64,
alaQoSRuleType Integer32,
alaQoSRuleTrapEvents INTEGER,
alaQoSRuleDefaultList INTEGER,
alaQoSRuleGreenPacketCount Counter64,
alaQoSRuleYellowPacketCount Counter64,
alaQoSRuleRedPacketCount Counter64,
alaQoSRuleGreenByteCount Counter64,
alaQoSRuleYellowByteCount Counter64,
alaQoSRuleRedByteCount Counter64
}
alaQoSRuleName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of rule"
::= { alaQoSRuleEntry 1 }
alaQoSRuleEnabled OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Is this rule enabled or not"
DEFVAL { enable }
::= { alaQoSRuleEntry 2 }
alaQoSRuleSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What entity created the rule."
DEFVAL { cli }
::= { alaQoSRuleEntry 3 }
alaQoSRulePrecedence OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Precedence value for rule.
Rules are evaluated from higher precedence to lower.
If rules have equal precedence, they are evaluated in
the order they are received."
DEFVAL { 0 }
::= { alaQoSRuleEntry 4 }
alaQoSRuleCondition OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name of the condition to use"
::= { alaQoSRuleEntry 5 }
alaQoSRuleAction OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name of the action to use"
::= { alaQoSRuleEntry 6 }
alaQoSRuleReflexive OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicator to tell if the rule is reflexive. Reflexive rules
allow specific return connections that would normally be denied."
DEFVAL { no }
::= { alaQoSRuleEntry 7 }
alaQoSRuleSave OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicator to tell whether to write out the rule during
snapshot commands."
DEFVAL { yes }
::= { alaQoSRuleEntry 8 }
alaQoSRuleLog OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Indicator to tell whether to log matches to this rule
in the QoS log."
DEFVAL { no }
::= { alaQoSRuleEntry 9 }
alaQoSRuleEnforced OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Is this rule currenly being enforced on the switch."
::= { alaQoSRuleEntry 10 }
alaQoSRuleActive OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Is this rule enforcable by the switch."
::= { alaQoSRuleEntry 11 }
alaQoSRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete rules according to the
RowStatus convention"
::= { alaQoSRuleEntry 12 }
alaQoSRuleValidityPeriod OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name of the validity period to use"
::= { alaQoSRuleEntry 13 }
alaQoSRuleValidityPeriodStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether there is a validity period
associated with this rule"
DEFVAL { disabled }
::= { alaQoSRuleEntry 14 }
alaQoSRuleLogInterval OBJECT-TYPE
SYNTAX Integer32 (0..3600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "How often to look for packets matching this rule when logging.
When 0 log as many as possible."
DEFVAL { 30 }
::= { alaQoSRuleEntry 15 }
alaQoSRuleCountType OBJECT-TYPE
SYNTAX INTEGER {
packets (1),
bytes (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Which rule statistics counters to update if not all are available"
DEFVAL { packets }
::= { alaQoSRuleEntry 16 }
alaQoSRulePacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for packets patching this rule"
::= { alaQoSRuleEntry 17 }
alaQoSRuleByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for bytes matching this rule"
::= { alaQoSRuleEntry 18 }
alaQoSRuleType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of rule this is. Each bit represents the following:
0x1 = bridged
0x2 = routed
0x4 = multicast"
::= { alaQoSRuleEntry 19 }
alaQoSRuleTrapEvents OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Send SNMP trap when 'qos user-port shutdown' param or
rule having action=port-disable is matched/invoked?"
DEFVAL { yes }
::= { alaQoSRuleEntry 20 }
alaQoSRuleDefaultList OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This rule belongs to the default policy list. "
DEFVAL { yes }
::= { alaQoSRuleEntry 21 }
alaQoSRuleGreenPacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets being green compliant."
::= { alaQoSRuleEntry 22 }
alaQoSRuleYellowPacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets being yellow compliant."
::= { alaQoSRuleEntry 23 }
alaQoSRuleRedPacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets being red compliant."
::= { alaQoSRuleEntry 24 }
alaQoSRuleGreenByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets being green compliant."
::= { alaQoSRuleEntry 25 }
alaQoSRuleYellowByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets being yellow compliant."
::= { alaQoSRuleEntry 26 }
alaQoSRuleRedByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets being red compliant."
::= { alaQoSRuleEntry 27 }
--
-- Definition of rule table
--
alaQoSAppliedRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedRule definitions"
::= { alaQoSMIBObjects 2 }
alaQoSAppliedRuleEntry OBJECT-TYPE
SYNTAX QoSAppliedRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedRule"
INDEX {
alaQoSAppliedRuleName
}
::= { alaQoSAppliedRuleTable 1 }
QoSAppliedRuleEntry ::=
SEQUENCE
{
alaQoSAppliedRuleName SnmpAdminString,
alaQoSAppliedRuleEnabled INTEGER,
alaQoSAppliedRuleSource INTEGER,
alaQoSAppliedRulePrecedence Integer32,
alaQoSAppliedRuleCondition SnmpAdminString,
alaQoSAppliedRuleAction SnmpAdminString,
alaQoSAppliedRuleReflexive INTEGER,
alaQoSAppliedRuleSave INTEGER,
alaQoSAppliedRuleLog INTEGER,
alaQoSAppliedRuleEnforced INTEGER,
alaQoSAppliedRuleActive INTEGER,
alaQoSAppliedRuleRowStatus RowStatus,
alaQoSAppliedRuleValidityPeriod SnmpAdminString,
alaQoSAppliedRuleValidityPeriodStatus INTEGER,
alaQoSAppliedRuleLogInterval Integer32,
alaQoSAppliedRuleCountType INTEGER,
alaQoSAppliedRulePacketCount Counter64,
alaQoSAppliedRuleByteCount Counter64,
alaQoSAppliedRuleType Integer32,
alaQoSAppliedRuleTrapEvents INTEGER,
alaQoSAppliedRuleDefaultList INTEGER,
alaQoSAppliedRuleGreenPacketCount Counter64,
alaQoSAppliedRuleYellowPacketCount Counter64,
alaQoSAppliedRuleRedPacketCount Counter64,
alaQoSAppliedRuleGreenByteCount Counter64,
alaQoSAppliedRuleYellowByteCount Counter64,
alaQoSAppliedRuleRedByteCount Counter64
}
alaQoSAppliedRuleName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of rule"
::= { alaQoSAppliedRuleEntry 1 }
alaQoSAppliedRuleEnabled OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Is this rule enabled or not"
::= { alaQoSAppliedRuleEntry 2 }
alaQoSAppliedRuleSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What entity created the rule."
::= { alaQoSAppliedRuleEntry 3 }
alaQoSAppliedRulePrecedence OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Precedence value for rule.
Rules are evaluated from higher precedence to lower.
If rules have equal precedence, they are evaluated in
the order they are received."
::= { alaQoSAppliedRuleEntry 4 }
alaQoSAppliedRuleCondition OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the condition to use"
::= { alaQoSAppliedRuleEntry 5 }
alaQoSAppliedRuleAction OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the action to use"
::= { alaQoSAppliedRuleEntry 6 }
alaQoSAppliedRuleReflexive OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicator to tell if the rule is reflexive. Reflexive rules
allow specific return connections that would normally be denied."
::= { alaQoSAppliedRuleEntry 7 }
alaQoSAppliedRuleSave OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicator to tell whether to write out the rule during
snapshot commands."
::= { alaQoSAppliedRuleEntry 8 }
alaQoSAppliedRuleLog OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicator to tell whether to log matches to this rule
in the QoS log."
::= { alaQoSAppliedRuleEntry 9 }
alaQoSAppliedRuleEnforced OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Is this rule currenly being enforced on the switch."
::= { alaQoSAppliedRuleEntry 10 }
alaQoSAppliedRuleActive OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Is this rule enforcable by the switch."
::= { alaQoSAppliedRuleEntry 11 }
alaQoSAppliedRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete rules according to the
RowStatus convention"
::= { alaQoSAppliedRuleEntry 12 }
alaQoSAppliedRuleValidityPeriod OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the validity period to use"
::= { alaQoSAppliedRuleEntry 13 }
alaQoSAppliedRuleValidityPeriodStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether there is a validity period
associated with this rule"
::= { alaQoSAppliedRuleEntry 14 }
alaQoSAppliedRuleLogInterval OBJECT-TYPE
SYNTAX Integer32 (0..3600)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "How often to look for packets matching this rule when logging.
When 0 log as many as possible."
::= { alaQoSAppliedRuleEntry 15 }
alaQoSAppliedRuleCountType OBJECT-TYPE
SYNTAX INTEGER {
packets (1),
bytes (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Which rule statistics counters to update if not all are available"
::= { alaQoSAppliedRuleEntry 16 }
alaQoSAppliedRulePacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for packets patching this rule"
::= { alaQoSAppliedRuleEntry 17 }
alaQoSAppliedRuleByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for bytes matching this rule"
::= { alaQoSAppliedRuleEntry 18 }
alaQoSAppliedRuleType OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of rule this is. Each bit represents the following:
0x1 = bridged
0x2 = routed
0x4 = multicast"
::= { alaQoSAppliedRuleEntry 19 }
alaQoSAppliedRuleTrapEvents OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Send SNMP trap when 'qos user-port shutdown' param or
rule having action=port-disable is matched/invoked?"
DEFVAL { yes }
::= { alaQoSAppliedRuleEntry 20 }
alaQoSAppliedRuleDefaultList OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This rule belongs to the default policy list. "
DEFVAL { yes }
::= { alaQoSAppliedRuleEntry 21 }
alaQoSAppliedRuleGreenPacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets being green compliant."
::= { alaQoSAppliedRuleEntry 22 }
alaQoSAppliedRuleYellowPacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets being yellow compliant."
::= { alaQoSAppliedRuleEntry 23 }
alaQoSAppliedRuleRedPacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets being red compliant."
::= { alaQoSAppliedRuleEntry 24 }
alaQoSAppliedRuleGreenByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets being green compliant."
::= { alaQoSAppliedRuleEntry 25 }
alaQoSAppliedRuleYellowByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets being yellow compliant."
::= { alaQoSAppliedRuleEntry 26 }
alaQoSAppliedRuleRedByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets being red compliant."
::= { alaQoSAppliedRuleEntry 27 }
--
-- Definition of condition table
--
alaQoSConditionTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSConditionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS Condition definitions"
::= { alaQoSMIBObjects 3 }
alaQoSConditionEntry OBJECT-TYPE
SYNTAX QoSConditionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS Condition"
INDEX {
alaQoSConditionName
}
::= { alaQoSConditionTable 1 }
QoSConditionEntry ::=
SEQUENCE
{
alaQoSConditionName SnmpAdminString,
alaQoSConditionSource INTEGER,
alaQoSConditionSourceSlot Integer32,
alaQoSConditionSourceSlotStatus INTEGER,
alaQoSConditionSourcePort Integer32,
alaQoSConditionSourcePortGroup SnmpAdminString,
alaQoSConditionSourcePortGroupStatus INTEGER,
alaQoSConditionDestinationSlot Integer32,
alaQoSConditionDestinationSlotStatus INTEGER,
alaQoSConditionDestinationPort Integer32,
alaQoSConditionDestinationPortGroup SnmpAdminString,
alaQoSConditionDestinationPortGroupStatus INTEGER,
alaQoSConditionSourceMacAddr MacAddress,
alaQoSConditionSourceMacAddrStatus INTEGER,
alaQoSConditionSourceMacMask MacAddress,
alaQoSConditionSourceMacGroup SnmpAdminString,
alaQoSConditionSourceMacGroupStatus INTEGER,
alaQoSConditionDestinationMacAddr MacAddress,
alaQoSConditionDestinationMacAddrStatus INTEGER,
alaQoSConditionDestinationMacMask MacAddress,
alaQoSConditionDestinationMacGroup SnmpAdminString,
alaQoSConditionDestinationMacGroupStatus INTEGER,
alaQoSConditionSourceVlan Integer32,
alaQoSConditionSourceVlanStatus INTEGER,
alaQoSConditionDestinationVlan Integer32,
alaQoSConditionDestinationVlanStatus INTEGER,
alaQoSCondition8021p Integer32,
alaQoSCondition8021pStatus INTEGER,
alaQoSConditionSourceIpAddr IpAddress,
alaQoSConditionSourceIpAddrStatus INTEGER,
alaQoSConditionSourceIpMask IpAddress,
alaQoSConditionSourceNetworkGroup SnmpAdminString,
alaQoSConditionSourceNetworkGroupStatus INTEGER,
alaQoSConditionDestinationIpAddr IpAddress,
alaQoSConditionDestinationIpAddrStatus INTEGER,
alaQoSConditionDestinationIpMask IpAddress,
alaQoSConditionDestinationNetworkGroup SnmpAdminString,
alaQoSConditionDestinationNetworkGroupStatus INTEGER,
alaQoSConditionMulticastIpAddr IpAddress,
alaQoSConditionMulticastIpAddrStatus INTEGER,
alaQoSConditionMulticastIpMask IpAddress,
alaQoSConditionMulticastNetworkGroup SnmpAdminString,
alaQoSConditionMulticastNetworkGroupStatus INTEGER,
alaQoSConditionTos Integer32,
alaQoSConditionTosStatus INTEGER,
alaQoSConditionTosMask Integer32,
alaQoSConditionDscp Integer32,
alaQoSConditionDscpStatus INTEGER,
alaQoSConditionDscpMask Integer32,
alaQoSConditionIpProtocol Integer32,
alaQoSConditionIpProtocolStatus INTEGER,
alaQoSConditionSourceIpPort Integer32,
alaQoSConditionSourceIpPortStatus INTEGER,
alaQoSConditionDestinationIpPort Integer32,
alaQoSConditionDestinationIpPortStatus INTEGER,
alaQoSConditionService SnmpAdminString,
alaQoSConditionServiceStatus INTEGER,
alaQoSConditionServiceGroup SnmpAdminString,
alaQoSConditionServiceGroupStatus INTEGER,
alaQoSConditionIcmpType Integer32,
alaQoSConditionIcmpTypeStatus INTEGER,
alaQoSConditionIcmpCode Integer32,
alaQoSConditionIcmpCodeStatus INTEGER,
alaQoSConditionRowStatus RowStatus,
alaQoSConditionSourcePortEnd Integer32,
alaQoSConditionDestinationPortEnd Integer32,
alaQoSConditionSourceIpPortEnd Integer32,
alaQoSConditionDestinationIpPortEnd Integer32,
alaQoSConditionSourceTcpPort Integer32,
alaQoSConditionSourceTcpPortStatus INTEGER,
alaQoSConditionSourceTcpPortEnd Integer32,
alaQoSConditionDestinationTcpPort Integer32,
alaQoSConditionDestinationTcpPortStatus INTEGER,
alaQoSConditionDestinationTcpPortEnd Integer32,
alaQoSConditionSourceUdpPort Integer32,
alaQoSConditionSourceUdpPortStatus INTEGER,
alaQoSConditionSourceUdpPortEnd Integer32,
alaQoSConditionDestinationUdpPort Integer32,
alaQoSConditionDestinationUdpPortStatus INTEGER,
alaQoSConditionDestinationUdpPortEnd Integer32,
alaQoSConditionEthertype Integer32,
alaQoSConditionEthertypeStatus INTEGER,
alaQoSConditionTcpFlags INTEGER,
alaQoSConditionTcpFlagsStatus INTEGER,
alaQoSConditionTcpFlagsVal Integer32,
alaQoSConditionTcpFlagsValStatus INTEGER,
alaQoSConditionTcpFlagsMask Integer32,
alaQoSConditionTcpFlagsMaskStatus INTEGER,
alaQoSConditionTcpEstablished INTEGER,
alaQoSConditionSourceIpv6Addr Ipv6Address,
alaQoSConditionSourceIpv6AddrStatus INTEGER,
alaQoSConditionSourceIpv6Mask Ipv6Address,
alaQoSConditionDestinationIpv6Addr Ipv6Address,
alaQoSConditionDestinationIpv6AddrStatus INTEGER,
alaQoSConditionDestinationIpv6Mask Ipv6Address,
alaQoSConditionIpv6Traffic INTEGER,
alaQoSConditionIpv6NH Integer32,
alaQoSConditionIpv6NHStatus INTEGER,
alaQoSConditionIpv6FlowLabel Integer32,
alaQoSConditionIpv6FlowLabelStatus INTEGER,
alaQoSConditionMcastIpv6Addr Ipv6Address,
alaQoSConditionMcastIpv6AddrStatus INTEGER,
alaQoSConditionMcastIpv6Mask Ipv6Address,
alaQoSConditionDscpEnd Integer32,
alaQoSConditionInnerSourceVlan Integer32,
alaQoSConditionInnerSourceVlanStatus INTEGER,
alaQoSConditionInner8021p Integer32,
alaQoSConditionInner8021pStatus INTEGER,
alaQoSConditionVrfName SnmpAdminString,
alaQoSConditionVrfNameStatus INTEGER,
alaQoSConditionFragments INTEGER,
alaQoSConditionSourceChassis Integer32,
alaQoSConditionDestinationChassis Integer32,
alaQoSConditionAppFpGroup SnmpAdminString,
alaQoSConditionAppFpGroupStatus INTEGER,
alaQoSConditionSIP INTEGER,
alaQoSConditionSIPStatus INTEGER,
alaQoSConditionDPIAppName SnmpAdminString,
alaQoSConditionDPIGrpName SnmpAdminString,
alaQoSConditionDPIAppNameStatus INTEGER,
alaQoSConditionDPIAppGroupStatus INTEGER,
alaQoSConditionVxlanVni Integer32,
alaQoSConditionVxlanVniStatus INTEGER,
alaQoSConditionVxlanPort Integer32,
alaQoSConditionVxlanPortStatus INTEGER,
alaQoSConditionVmSourceMacAddr MacAddress,
alaQoSConditionVmSourceMacAddrStatus INTEGER,
alaQoSConditionVmSourceMacMask MacAddress,
alaQoSConditionVmSourceIpAddr IpAddress,
alaQoSConditionVmSourceIpAddrStatus INTEGER,
alaQoSConditionVmSourceIpMask IpAddress,
alaQoSConditionVmSourceIpv6IpAddr Ipv6Address,
alaQoSConditionVmSourceIpv6IpAddrStatus INTEGER,
alaQoSConditionVmSourceIpv6IpMask Ipv6Address,
alaQoSConditionVmIpProtocol Integer32,
alaQoSConditionVmIpProtocolStatus INTEGER,
alaQosConditionVmL4SourcePort Integer32,
alaQosConditionVmL4SourcePortStatus INTEGER,
alaQosConditionVmL4DestPort Integer32,
alaQosConditionVmL4DestPortStatus INTEGER,
alaQosConditionVxlanStatus INTEGER,
alaQoSConditionSourcePortSplitGroup SnmpAdminString,
alaQoSConditionSourcePortSplitGroupStatus INTEGER
}
alaQoSConditionName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of condition"
::= { alaQoSConditionEntry 1 }
alaQoSConditionSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What entity created the condition."
DEFVAL { cli }
::= { alaQoSConditionEntry 2 }
alaQoSConditionSourceSlot OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source physical slot used for traffic classification
When 0, the port identifies an aggregate"
DEFVAL { 1 }
::= { alaQoSConditionEntry 3 }
alaQoSConditionSourceSlotStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source physical slot and
port range needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 4 }
alaQoSConditionSourcePort OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source physical port range start to use for
traffic classification"
DEFVAL { 1 }
::= { alaQoSConditionEntry 5 }
alaQoSConditionSourcePortGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source physical port group to use for traffic classification"
::= { alaQoSConditionEntry 6 }
alaQoSConditionSourcePortGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source physical port group
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 7 }
alaQoSConditionDestinationSlot OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination physical slot used for traffic classification
When 0, the port identifies an aggregate"
DEFVAL { 1 }
::= { alaQoSConditionEntry 8 }
alaQoSConditionDestinationSlotStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination physical slot
and port range needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 9 }
alaQoSConditionDestinationPort OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination physical port range start to use for traffic
classification"
DEFVAL { 1 }
::= { alaQoSConditionEntry 10 }
alaQoSConditionDestinationPortGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination physical port group to use for traffic
classification"
::= { alaQoSConditionEntry 11 }
alaQoSConditionDestinationPortGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination physical port
group needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 12 }
alaQoSConditionSourceMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source MAC address to use for traffic classification"
DEFVAL { '000000000000'h }
::= { alaQoSConditionEntry 13 }
alaQoSConditionSourceMacAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 14 }
alaQoSConditionSourceMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source MAC mask to use for traffic classification"
DEFVAL { 'ffffffffffff'h }
::= { alaQoSConditionEntry 15 }
alaQoSConditionSourceMacGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source MAC group to use for traffic classification"
::= { alaQoSConditionEntry 16 }
alaQoSConditionSourceMacGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source MAC group
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 17 }
alaQoSConditionDestinationMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination MAC address to use for traffic classification"
DEFVAL { '000000000000'h }
::= { alaQoSConditionEntry 18 }
alaQoSConditionDestinationMacAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination MAC address
& mask needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 19 }
alaQoSConditionDestinationMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination MAC mask to use for traffic classification"
DEFVAL { 'ffffffffffff'h }
::= { alaQoSConditionEntry 20 }
alaQoSConditionDestinationMacGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination MAC group to use for traffic classification"
::= { alaQoSConditionEntry 21 }
alaQoSConditionDestinationMacGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination MAC group
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 22 }
alaQoSConditionSourceVlan OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source VLAN to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 23 }
alaQoSConditionSourceVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source VLAN
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 24 }
alaQoSConditionDestinationVlan OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination VLAN to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 25 }
alaQoSConditionDestinationVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination VLAN
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 26 }
alaQoSCondition8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "802.1p value to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 27 }
alaQoSCondition8021pStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the 802.1p value
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 28 }
alaQoSConditionSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP address to use for traffic classification"
DEFVAL { '00000000'h }
::= { alaQoSConditionEntry 29 }
alaQoSConditionSourceIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 30 }
alaQoSConditionSourceIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP mask to use for traffic classification"
DEFVAL { 'ffffffff'h }
::= { alaQoSConditionEntry 31 }
alaQoSConditionSourceNetworkGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source network group to use for traffic classification"
::= { alaQoSConditionEntry 32 }
alaQoSConditionSourceNetworkGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source network group
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 33 }
alaQoSConditionDestinationIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination IP address to use for traffic classification"
DEFVAL { '00000000'h }
::= { alaQoSConditionEntry 34 }
alaQoSConditionDestinationIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination IP address
& mask needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 35 }
alaQoSConditionDestinationIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination IP mask to use for traffic classification"
DEFVAL { 'ffffffff'h }
::= { alaQoSConditionEntry 36 }
alaQoSConditionDestinationNetworkGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination network group to use for traffic classification"
::= { alaQoSConditionEntry 37 }
alaQoSConditionDestinationNetworkGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination network group
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 38 }
alaQoSConditionMulticastIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Multicast IP address to use for traffic classification"
DEFVAL { '00000000'h }
::= { alaQoSConditionEntry 39 }
alaQoSConditionMulticastIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the multicast IP address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 40 }
alaQoSConditionMulticastIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Multicast IP mask to use for traffic classification"
DEFVAL { 'ffffffff'h }
::= { alaQoSConditionEntry 41 }
alaQoSConditionMulticastNetworkGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Multicast network group to use for traffic classification"
::= { alaQoSConditionEntry 42 }
alaQoSConditionMulticastNetworkGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the multicast network group
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 43 }
alaQoSConditionTos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "TOS value to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 44 }
alaQoSConditionTosStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the TOS value & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 45 }
alaQoSConditionTosMask OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "TOS mask to use for traffic classification"
DEFVAL { 7 }
::= { alaQoSConditionEntry 46 }
alaQoSConditionDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DSCP value to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 47 }
alaQoSConditionDscpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the DSCP value & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 48 }
alaQoSConditionDscpMask OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DSCP mask to use for traffic classification"
DEFVAL { 63 }
::= { alaQoSConditionEntry 49 }
alaQoSConditionIpProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP protocol to use for traffic classification."
DEFVAL { 0 }
::= { alaQoSConditionEntry 50 }
alaQoSConditionIpProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 51 }
alaQoSConditionSourceIpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP port range start to use for traffic classification."
::= { alaQoSConditionEntry 52 }
alaQoSConditionSourceIpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 53 }
alaQoSConditionDestinationIpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination IP port range start to use for traffic
classification."
::= { alaQoSConditionEntry 54 }
alaQoSConditionDestinationIpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 55 }
alaQoSConditionService OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name of service to use for traffic classification"
::= { alaQoSConditionEntry 56 }
alaQoSConditionServiceStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the service
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 57 }
alaQoSConditionServiceGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name of service group to use for traffic classification"
::= { alaQoSConditionEntry 58 }
alaQoSConditionServiceGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the service group
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 59 }
alaQoSConditionIcmpType OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "ICMP type to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 60 }
alaQoSConditionIcmpTypeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the ICMP type
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 61 }
alaQoSConditionIcmpCode OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "ICMP code to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 62 }
alaQoSConditionIcmpCodeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the ICMP code
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 63 }
alaQoSConditionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete conditions according to the
RowStatus convention"
::= { alaQoSConditionEntry 64 }
alaQoSConditionSourcePortEnd OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use source port as a single port."
DEFVAL { 1 }
::= { alaQoSConditionEntry 65 }
alaQoSConditionDestinationPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use destination port as a single
port."
DEFVAL { 1 }
::= { alaQoSConditionEntry 66 }
alaQoSConditionSourceIpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a
range. When '0', use source IP port as a single IP port."
::= { alaQoSConditionEntry 67 }
alaQoSConditionDestinationIpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a single IP port."
::= { alaQoSConditionEntry 68 }
alaQoSConditionSourceTcpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source TCP port range start to use for traffic classification."
::= { alaQoSConditionEntry 69 }
alaQoSConditionSourceTcpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 70 }
alaQoSConditionSourceTcpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP port."
::= { alaQoSConditionEntry 71 }
alaQoSConditionDestinationTcpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination TCP port range start to use for traffic
classification."
::= { alaQoSConditionEntry 72 }
alaQoSConditionDestinationTcpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 73 }
alaQoSConditionDestinationTcpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port
as a single TCP port."
::= { alaQoSConditionEntry 74 }
alaQoSConditionSourceUdpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source UDP port range start to use for traffic classification."
::= { alaQoSConditionEntry 75 }
alaQoSConditionSourceUdpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 76 }
alaQoSConditionSourceUdpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate
a range. When '0', use source UDP port as a single UDP port."
::= { alaQoSConditionEntry 77 }
alaQoSConditionDestinationUdpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination UDP port range start to use for traffic
classification."
::= { alaQoSConditionEntry 78 }
alaQoSConditionDestinationUdpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 79 }
alaQoSConditionDestinationUdpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port
as a single TCP port."
::= { alaQoSConditionEntry 80 }
alaQoSConditionEthertype OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Ethertype value to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 81 }
alaQoSConditionEthertypeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the ethertype value
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 82 }
alaQoSConditionTcpFlags OBJECT-TYPE
SYNTAX INTEGER {
all (1),
any (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Use any/all specifieid TCP flags for traffic classification"
DEFVAL { all }
::= { alaQoSConditionEntry 83 }
alaQoSConditionTcpFlagsStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the TCP flag bits
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 84 }
alaQoSConditionTcpFlagsVal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "TCP flags values used for traffic classification"
::= { alaQoSConditionEntry 85 }
alaQoSConditionTcpFlagsValStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Not used"
DEFVAL { disabled }
::= { alaQoSConditionEntry 86 }
alaQoSConditionTcpFlagsMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Mask of TCP flags bits used for traffic classification"
::= { alaQoSConditionEntry 87 }
alaQoSConditionTcpFlagsMaskStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Not used"
DEFVAL { disabled }
::= { alaQoSConditionEntry 88 }
alaQoSConditionTcpEstablished OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Look for established TCP sessions in classification"
DEFVAL { no }
::= { alaQoSConditionEntry 89 }
alaQoSConditionSourceIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IPv6 address to use for traffic classification"
DEFVAL { '00000000000000000000000000000000'h }
::= { alaQoSConditionEntry 90 }
alaQoSConditionSourceIpv6AddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source IPv6 address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 91 }
alaQoSConditionSourceIpv6Mask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IPv6 mask to use for traffic classification"
DEFVAL { 'ffffffffffffffffffffffffffffffff'h }
::= { alaQoSConditionEntry 92 }
alaQoSConditionDestinationIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination IPv6 address to use for traffic classification"
DEFVAL { '00000000000000000000000000000000'h }
::= { alaQoSConditionEntry 93 }
alaQoSConditionDestinationIpv6AddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination IPv6 address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 94 }
alaQoSConditionDestinationIpv6Mask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination IPv6 mask to use for traffic classification"
DEFVAL { 'ffffffffffffffffffffffffffffffff'h }
::= { alaQoSConditionEntry 95 }
alaQoSConditionIpv6Traffic OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "classify IPV6 traffic "
::= { alaQoSConditionEntry 96 }
alaQoSConditionIpv6NH OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "NH value to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 97 }
alaQoSConditionIpv6NHStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the NH value
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 98 }
alaQoSConditionIpv6FlowLabel OBJECT-TYPE
SYNTAX Integer32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "FL value to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 99 }
alaQoSConditionIpv6FlowLabelStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the flow label value
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 100 }
alaQoSConditionMcastIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Multicast IPv6 address to use for traffic classification"
DEFVAL { '00000000000000000000000000000000'h }
::= { alaQoSConditionEntry 101 }
alaQoSConditionMcastIpv6AddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 102 }
alaQoSConditionMcastIpv6Mask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Multicast IPv6 mask to use for traffic classification"
DEFVAL { 'ffffffffffffffffffffffffffffffff'h }
::= { alaQoSConditionEntry 103 }
alaQoSConditionDscpEnd OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DSCP value to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 104 }
alaQoSConditionInnerSourceVlan OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Customer VLAN to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 105 }
alaQoSConditionInnerSourceVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the inner VLAN
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 106 }
alaQoSConditionInner8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Customer 802.1p to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSConditionEntry 107 }
alaQoSConditionInner8021pStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the inner 802.1p
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 108 }
alaQoSConditionVrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name of Vrf to match traffic in"
::= { alaQoSConditionEntry 109 }
alaQoSConditionVrfNameStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 110 }
alaQoSConditionFragments OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "TCP packet fragments"
DEFVAL { no }
::= { alaQoSConditionEntry 111 }
alaQoSConditionSourceChassis OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source physical chassis used for traffic classification."
DEFVAL { 1 }
::= { alaQoSConditionEntry 112 }
alaQoSConditionDestinationChassis OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination physical chassis used for traffic classification."
DEFVAL { 1 }
::= { alaQoSConditionEntry 113 }
alaQoSConditionAppFpGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..24))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Application Fingerprinting group."
::= { alaQoSConditionEntry 114 }
alaQoSConditionAppFpGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the traffic from a specific Application Fingerprinting Group needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 115 }
alaQoSConditionSIP OBJECT-TYPE
SYNTAX INTEGER {
audio (1),
video (2),
other (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SIP type to use for traffic classification"
DEFVAL { audio }
::= { alaQoSConditionEntry 116 }
alaQoSConditionSIPStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SIP Status field indicates whether SIP is enabled or disabled
for traffic classification"
DEFVAL { enabled }
::= { alaQoSConditionEntry 117 }
alaQoSConditionDPIAppName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DPI Application Name associated with a policy condition."
::= { alaQoSConditionEntry 118 }
alaQoSConditionDPIGrpName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DPI Group Name associated with a policy condition."
::= { alaQoSConditionEntry 119 }
alaQoSConditionDPIAppNameStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DPI Status field indicates whether DPI Application Name is enabled or disabled
for traffic classification"
DEFVAL { disabled }
::= { alaQoSConditionEntry 120 }
alaQoSConditionDPIAppGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DPI Status field indicates whether DPI Application Group is enabled or disabled
for traffic classification"
DEFVAL { disabled }
::= { alaQoSConditionEntry 121 }
alaQoSConditionVxlanVni OBJECT-TYPE
SYNTAX Integer32(0..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { alaQoSConditionEntry 122 }
alaQoSConditionVxlanVniStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the VNI needs
to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 123 }
alaQoSConditionVxlanPort OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { alaQoSConditionEntry 124 }
alaQoSConditionVxlanPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the VXLAN Port needs
to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 125 }
alaQoSConditionVmSourceMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source MAC address to use for traffic classification"
DEFVAL { '000000000000'h }
::= { alaQoSConditionEntry 126 }
alaQoSConditionVmSourceMacAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 127 }
alaQoSConditionVmSourceMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source MAC mask to use for traffic classification"
DEFVAL { 'ffffffffffff'h }
::= { alaQoSConditionEntry 128 }
alaQoSConditionVmSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP address to use for traffic classification"
DEFVAL { '00000000'h }
::= { alaQoSConditionEntry 129 }
alaQoSConditionVmSourceIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 130 }
alaQoSConditionVmSourceIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP mask to use for traffic classification"
DEFVAL { 'ffffffff'h }
::= { alaQoSConditionEntry 131 }
alaQoSConditionVmSourceIpv6IpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination IP address to use for traffic classification"
DEFVAL { '00000000000000000000000000000000'h }
::= { alaQoSConditionEntry 132 }
alaQoSConditionVmSourceIpv6IpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 133 }
alaQoSConditionVmSourceIpv6IpMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP mask to use for traffic classification"
DEFVAL { 'ffffffffffffffffffffffffffffffff'h }
::= { alaQoSConditionEntry 134 }
alaQoSConditionVmIpProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP protocol to use for traffic classification."
DEFVAL { 0 }
::= { alaQoSConditionEntry 135 }
alaQoSConditionVmIpProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 136 }
alaQosConditionVmL4SourcePort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP port to use for traffic classification."
::= { alaQoSConditionEntry 137 }
alaQosConditionVmL4SourcePortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source IP port
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 138 }
alaQosConditionVmL4DestPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination IP port to use for traffic
classification."
::= { alaQoSConditionEntry 139 }
alaQosConditionVmL4DestPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 140 }
alaQosConditionVxlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating vxlan configuration."
DEFVAL { disabled }
::= { alaQoSConditionEntry 141 }
alaQoSConditionSourcePortSplitGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source physical port split-group to be used for traffic classification. Meter action should be applied on per-port basis."
::= { alaQoSConditionEntry 142 }
alaQoSConditionSourcePortSplitGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source physical port splitGroup
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSConditionEntry 143 }
--
-- Definition of condition table
--
alaQoSAppliedConditionTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedConditionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedCondition definitions"
::= { alaQoSMIBObjects 4 }
alaQoSAppliedConditionEntry OBJECT-TYPE
SYNTAX QoSAppliedConditionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedCondition"
INDEX {
alaQoSAppliedConditionName
}
::= { alaQoSAppliedConditionTable 1 }
QoSAppliedConditionEntry ::=
SEQUENCE
{
alaQoSAppliedConditionName SnmpAdminString,
alaQoSAppliedConditionSource INTEGER,
alaQoSAppliedConditionSourceSlot Integer32,
alaQoSAppliedConditionSourceSlotStatus INTEGER,
alaQoSAppliedConditionSourcePort Integer32,
alaQoSAppliedConditionSourcePortGroup SnmpAdminString,
alaQoSAppliedConditionSourcePortGroupStatus INTEGER,
alaQoSAppliedConditionDestinationSlot Integer32,
alaQoSAppliedConditionDestinationSlotStatus INTEGER,
alaQoSAppliedConditionDestinationPort Integer32,
alaQoSAppliedConditionDestinationPortGroup SnmpAdminString,
alaQoSAppliedConditionDestinationPortGroupStatus INTEGER,
alaQoSAppliedConditionSourceMacAddr MacAddress,
alaQoSAppliedConditionSourceMacAddrStatus INTEGER,
alaQoSAppliedConditionSourceMacMask MacAddress,
alaQoSAppliedConditionSourceMacGroup SnmpAdminString,
alaQoSAppliedConditionSourceMacGroupStatus INTEGER,
alaQoSAppliedConditionDestinationMacAddr MacAddress,
alaQoSAppliedConditionDestinationMacAddrStatus INTEGER,
alaQoSAppliedConditionDestinationMacMask MacAddress,
alaQoSAppliedConditionDestinationMacGroup SnmpAdminString,
alaQoSAppliedConditionDestinationMacGroupStatus INTEGER,
alaQoSAppliedConditionSourceVlan Integer32,
alaQoSAppliedConditionSourceVlanStatus INTEGER,
alaQoSAppliedConditionDestinationVlan Integer32,
alaQoSAppliedConditionDestinationVlanStatus INTEGER,
alaQoSAppliedCondition8021p Integer32,
alaQoSAppliedCondition8021pStatus INTEGER,
alaQoSAppliedConditionSourceIpAddr IpAddress,
alaQoSAppliedConditionSourceIpAddrStatus INTEGER,
alaQoSAppliedConditionSourceIpMask IpAddress,
alaQoSAppliedConditionSourceNetworkGroup SnmpAdminString,
alaQoSAppliedConditionSourceNetworkGroupStatus INTEGER,
alaQoSAppliedConditionDestinationIpAddr IpAddress,
alaQoSAppliedConditionDestinationIpAddrStatus INTEGER,
alaQoSAppliedConditionDestinationIpMask IpAddress,
alaQoSAppliedConditionDestinationNetworkGroup SnmpAdminString,
alaQoSAppliedConditionDestinationNetworkGroupStatus INTEGER,
alaQoSAppliedConditionMulticastIpAddr IpAddress,
alaQoSAppliedConditionMulticastIpAddrStatus INTEGER,
alaQoSAppliedConditionMulticastIpMask IpAddress,
alaQoSAppliedConditionMulticastNetworkGroup SnmpAdminString,
alaQoSAppliedConditionMulticastNetworkGroupStatus INTEGER,
alaQoSAppliedConditionTos Integer32,
alaQoSAppliedConditionTosStatus INTEGER,
alaQoSAppliedConditionTosMask Integer32,
alaQoSAppliedConditionDscp Integer32,
alaQoSAppliedConditionDscpStatus INTEGER,
alaQoSAppliedConditionDscpMask Integer32,
alaQoSAppliedConditionIpProtocol Integer32,
alaQoSAppliedConditionIpProtocolStatus INTEGER,
alaQoSAppliedConditionSourceIpPort Integer32,
alaQoSAppliedConditionSourceIpPortStatus INTEGER,
alaQoSAppliedConditionDestinationIpPort Integer32,
alaQoSAppliedConditionDestinationIpPortStatus INTEGER,
alaQoSAppliedConditionService SnmpAdminString,
alaQoSAppliedConditionServiceStatus INTEGER,
alaQoSAppliedConditionServiceGroup SnmpAdminString,
alaQoSAppliedConditionServiceGroupStatus INTEGER,
alaQoSAppliedConditionIcmpType Integer32,
alaQoSAppliedConditionIcmpTypeStatus INTEGER,
alaQoSAppliedConditionIcmpCode Integer32,
alaQoSAppliedConditionIcmpCodeStatus INTEGER,
alaQoSAppliedConditionRowStatus RowStatus,
alaQoSAppliedConditionSourcePortEnd Integer32,
alaQoSAppliedConditionDestinationPortEnd Integer32,
alaQoSAppliedConditionSourceIpPortEnd Integer32,
alaQoSAppliedConditionDestinationIpPortEnd Integer32,
alaQoSAppliedConditionSourceTcpPort Integer32,
alaQoSAppliedConditionSourceTcpPortStatus INTEGER,
alaQoSAppliedConditionSourceTcpPortEnd Integer32,
alaQoSAppliedConditionDestinationTcpPort Integer32,
alaQoSAppliedConditionDestinationTcpPortStatus INTEGER,
alaQoSAppliedConditionDestinationTcpPortEnd Integer32,
alaQoSAppliedConditionSourceUdpPort Integer32,
alaQoSAppliedConditionSourceUdpPortStatus INTEGER,
alaQoSAppliedConditionSourceUdpPortEnd Integer32,
alaQoSAppliedConditionDestinationUdpPort Integer32,
alaQoSAppliedConditionDestinationUdpPortStatus INTEGER,
alaQoSAppliedConditionDestinationUdpPortEnd Integer32,
alaQoSAppliedConditionEthertype Integer32,
alaQoSAppliedConditionEthertypeStatus INTEGER,
alaQoSAppliedConditionTcpFlags INTEGER,
alaQoSAppliedConditionTcpFlagsStatus INTEGER,
alaQoSAppliedConditionTcpFlagsVal Integer32,
alaQoSAppliedConditionTcpFlagsValStatus INTEGER,
alaQoSAppliedConditionTcpFlagsMask Integer32,
alaQoSAppliedConditionTcpFlagsMaskStatus INTEGER,
alaQoSAppliedConditionTcpEstablished INTEGER,
alaQoSAppliedConditionSourceIpv6Addr Ipv6Address,
alaQoSAppliedConditionSourceIpv6AddrStatus INTEGER,
alaQoSAppliedConditionSourceIpv6Mask Ipv6Address,
alaQoSAppliedConditionDestinationIpv6Addr Ipv6Address,
alaQoSAppliedConditionDestinationIpv6AddrStatus INTEGER,
alaQoSAppliedConditionDestinationIpv6Mask Ipv6Address,
alaQoSAppliedConditionIpv6Traffic INTEGER,
alaQoSAppliedConditionIpv6NH Integer32,
alaQoSAppliedConditionIpv6NHStatus INTEGER,
alaQoSAppliedConditionIpv6FlowLabel Integer32,
alaQoSAppliedConditionIpv6FlowLabelStatus INTEGER,
alaQoSAppliedConditionMcastIpv6Addr Ipv6Address,
alaQoSAppliedConditionMcastIpv6AddrStatus INTEGER,
alaQoSAppliedConditionMcastIpv6Mask Ipv6Address,
alaQoSAppliedConditionDscpEnd Integer32,
alaQoSAppliedConditionInnerSourceVlan Integer32,
alaQoSAppliedConditionInnerSourceVlanStatus INTEGER,
alaQoSAppliedConditionInner8021p Integer32,
alaQoSAppliedConditionInner8021pStatus INTEGER,
alaQoSAppliedConditionVrfName SnmpAdminString,
alaQoSAppliedConditionVrfNameStatus INTEGER,
alaQoSAppliedConditionFragments INTEGER,
alaQoSAppliedConditionSourceChassis Integer32,
alaQoSAppliedConditionDestinationChassis Integer32,
alaQoSAppliedConditionAppFpGroup SnmpAdminString,
alaQoSAppliedConditionAppFpGroupStatus INTEGER,
alaQoSAppliedConditionSIP INTEGER,
alaQoSAppliedConditionSIPStatus INTEGER,
alaQoSAppliedConditionDPIAppName SnmpAdminString,
alaQoSAppliedConditionDPIAppGrp SnmpAdminString,
alaQoSAppliedConditionDPIAppNameStatus INTEGER,
alaQoSAppliedConditionDPIAppGroupStatus INTEGER,
alaQoSAppliedConditionVxlanVni Integer32,
alaQoSAppliedConditionVxlanVniStatus INTEGER,
alaQoSAppliedConditionVxlanPort Integer32,
alaQoSAppliedConditionVxlanPortStatus INTEGER,
alaQoSAppliedConditionVmSourceMacAddr MacAddress,
alaQoSAppliedConditionVmSourceMacAddrStatus INTEGER,
alaQoSAppliedConditionVmSourceMacMask MacAddress,
alaQoSAppliedConditionVmSourceIpAddr IpAddress,
alaQoSAppliedConditionVmSourceIpAddrStatus INTEGER,
alaQoSAppliedConditionVmSourceIpMask IpAddress,
alaQoSAppliedConditionVmSourceIpv6IpAddr Ipv6Address,
alaQoSAppliedConditionVmSourceIpv6IpAddrStatus INTEGER,
alaQoSAppliedConditionVmSourceIpv6IpMask Ipv6Address,
alaQoSAppliedConditionVmIpProtocol Integer32,
alaQoSAppliedConditionVmIpProtocolStatus INTEGER,
alaQosAppliedConditionVmL4SourcePort Integer32,
alaQosAppliedConditionVmL4SourcePortStatus INTEGER,
alaQosAppliedConditionVmL4DestPort Integer32,
alaQosAppliedConditionVmL4DestPortStatus INTEGER,
alaQosAppliedConditionVxlanStatus INTEGER,
alaQoSAppliedConditionSourcePortSplitGroup SnmpAdminString,
alaQoSAppliedConditionSourcePortSplitGroupStatus INTEGER
}
alaQoSAppliedConditionName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of condition"
::= { alaQoSAppliedConditionEntry 1 }
alaQoSAppliedConditionSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What entity created the condition."
::= { alaQoSAppliedConditionEntry 2 }
alaQoSAppliedConditionSourceSlot OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source physical slot used for traffic classification
When 0, the port identifies an aggregate"
::= { alaQoSAppliedConditionEntry 3 }
alaQoSAppliedConditionSourceSlotStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source physical slot and
port range needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 4 }
alaQoSAppliedConditionSourcePort OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source physical port range start to use for
traffic classification"
::= { alaQoSAppliedConditionEntry 5 }
alaQoSAppliedConditionSourcePortGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source physical port group to use for traffic classification"
::= { alaQoSAppliedConditionEntry 6 }
alaQoSAppliedConditionSourcePortGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source physical port group
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 7 }
alaQoSAppliedConditionDestinationSlot OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination physical slot used for traffic classification
When 0, the port identifies an aggregate"
::= { alaQoSAppliedConditionEntry 8 }
alaQoSAppliedConditionDestinationSlotStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination physical slot
and port range needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 9 }
alaQoSAppliedConditionDestinationPort OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination physical port range start to use for traffic
classification"
::= { alaQoSAppliedConditionEntry 10 }
alaQoSAppliedConditionDestinationPortGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination physical port group to use for traffic
classification"
::= { alaQoSAppliedConditionEntry 11 }
alaQoSAppliedConditionDestinationPortGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination physical port
group needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 12 }
alaQoSAppliedConditionSourceMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source MAC address to use for traffic classification"
::= { alaQoSAppliedConditionEntry 13 }
alaQoSAppliedConditionSourceMacAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 14 }
alaQoSAppliedConditionSourceMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source MAC mask to use for traffic classification"
::= { alaQoSAppliedConditionEntry 15 }
alaQoSAppliedConditionSourceMacGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source MAC group to use for traffic classification"
::= { alaQoSAppliedConditionEntry 16 }
alaQoSAppliedConditionSourceMacGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source MAC group
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 17 }
alaQoSAppliedConditionDestinationMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination MAC address to use for traffic classification"
::= { alaQoSAppliedConditionEntry 18 }
alaQoSAppliedConditionDestinationMacAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination MAC address
& mask needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 19 }
alaQoSAppliedConditionDestinationMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination MAC mask to use for traffic classification"
::= { alaQoSAppliedConditionEntry 20 }
alaQoSAppliedConditionDestinationMacGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination MAC group to use for traffic classification"
::= { alaQoSAppliedConditionEntry 21 }
alaQoSAppliedConditionDestinationMacGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination MAC group
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 22 }
alaQoSAppliedConditionSourceVlan OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source VLAN to use for traffic classification"
::= { alaQoSAppliedConditionEntry 23 }
alaQoSAppliedConditionSourceVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source VLAN
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 24 }
alaQoSAppliedConditionDestinationVlan OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination VLAN to use for traffic classification"
::= { alaQoSAppliedConditionEntry 25 }
alaQoSAppliedConditionDestinationVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination VLAN
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 26 }
alaQoSAppliedCondition8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "802.1p value to use for traffic classification"
::= { alaQoSAppliedConditionEntry 27 }
alaQoSAppliedCondition8021pStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the 802.1p value
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 28 }
alaQoSAppliedConditionSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source IP address to use for traffic classification"
::= { alaQoSAppliedConditionEntry 29 }
alaQoSAppliedConditionSourceIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 30 }
alaQoSAppliedConditionSourceIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source IP mask to use for traffic classification"
::= { alaQoSAppliedConditionEntry 31 }
alaQoSAppliedConditionSourceNetworkGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source network group to use for traffic classification"
::= { alaQoSAppliedConditionEntry 32 }
alaQoSAppliedConditionSourceNetworkGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source network group
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 33 }
alaQoSAppliedConditionDestinationIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination IP address to use for traffic classification"
::= { alaQoSAppliedConditionEntry 34 }
alaQoSAppliedConditionDestinationIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination IP address
& mask needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 35 }
alaQoSAppliedConditionDestinationIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination IP mask to use for traffic classification"
::= { alaQoSAppliedConditionEntry 36 }
alaQoSAppliedConditionDestinationNetworkGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination network group to use for traffic classification"
::= { alaQoSAppliedConditionEntry 37 }
alaQoSAppliedConditionDestinationNetworkGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination network group
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 38 }
alaQoSAppliedConditionMulticastIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Multicast IP address to use for traffic classification"
::= { alaQoSAppliedConditionEntry 39 }
alaQoSAppliedConditionMulticastIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the multicast IP address & mask
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 40 }
alaQoSAppliedConditionMulticastIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Multicast IP mask to use for traffic classification"
::= { alaQoSAppliedConditionEntry 41 }
alaQoSAppliedConditionMulticastNetworkGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Multicast network group to use for traffic classification"
::= { alaQoSAppliedConditionEntry 42 }
alaQoSAppliedConditionMulticastNetworkGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the multicast network group
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 43 }
alaQoSAppliedConditionTos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TOS value to use for traffic classification"
::= { alaQoSAppliedConditionEntry 44 }
alaQoSAppliedConditionTosStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the TOS value & mask
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 45 }
alaQoSAppliedConditionTosMask OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TOS mask to use for traffic classification"
::= { alaQoSAppliedConditionEntry 46 }
alaQoSAppliedConditionDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DSCP value to use for traffic classification"
::= { alaQoSAppliedConditionEntry 47 }
alaQoSAppliedConditionDscpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the DSCP value & mask
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 48 }
alaQoSAppliedConditionDscpMask OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DSCP mask to use for traffic classification"
::= { alaQoSAppliedConditionEntry 49 }
alaQoSAppliedConditionIpProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "IP protocol to use for traffic classification."
::= { alaQoSAppliedConditionEntry 50 }
alaQoSAppliedConditionIpProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 51 }
alaQoSAppliedConditionSourceIpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source IP port range start to use for traffic classification."
::= { alaQoSAppliedConditionEntry 52 }
alaQoSAppliedConditionSourceIpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 53 }
alaQoSAppliedConditionDestinationIpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination IP port range start to use for traffic
classification."
::= { alaQoSAppliedConditionEntry 54 }
alaQoSAppliedConditionDestinationIpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 55 }
alaQoSAppliedConditionService OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of service to use for traffic classification"
::= { alaQoSAppliedConditionEntry 56 }
alaQoSAppliedConditionServiceStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the service
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 57 }
alaQoSAppliedConditionServiceGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of service group to use for traffic classification"
::= { alaQoSAppliedConditionEntry 58 }
alaQoSAppliedConditionServiceGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the service group
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 59 }
alaQoSAppliedConditionIcmpType OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ICMP type to use for traffic classification"
::= { alaQoSAppliedConditionEntry 60 }
alaQoSAppliedConditionIcmpTypeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the ICMP type
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 61 }
alaQoSAppliedConditionIcmpCode OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ICMP code to use for traffic classification"
::= { alaQoSAppliedConditionEntry 62 }
alaQoSAppliedConditionIcmpCodeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the ICMP code
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 63 }
alaQoSAppliedConditionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete conditions according to the
RowStatus convention"
::= { alaQoSAppliedConditionEntry 64 }
alaQoSAppliedConditionSourcePortEnd OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use source port as a single port."
::= { alaQoSAppliedConditionEntry 65 }
alaQoSAppliedConditionDestinationPortEnd OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination physical port range end to use for traffic
classification. Must be greater than port range start to
indicate a range. When '1', use destination port as a single
port."
::= { alaQoSAppliedConditionEntry 66 }
alaQoSAppliedConditionSourceIpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate a
range. When '0', use source IP port as a single IP port."
::= { alaQoSAppliedConditionEntry 67 }
alaQoSAppliedConditionDestinationIpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a single IP port."
::= { alaQoSAppliedConditionEntry 68 }
alaQoSAppliedConditionSourceTcpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source TCP port range start to use for traffic classification."
::= { alaQoSAppliedConditionEntry 69 }
alaQoSAppliedConditionSourceTcpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 70 }
alaQoSAppliedConditionSourceTcpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP port."
::= { alaQoSAppliedConditionEntry 71 }
alaQoSAppliedConditionDestinationTcpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination TCP port range start to use for traffic
classification."
::= { alaQoSAppliedConditionEntry 72 }
alaQoSAppliedConditionDestinationTcpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 73 }
alaQoSAppliedConditionDestinationTcpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port
as a single TCP port."
::= { alaQoSAppliedConditionEntry 74 }
alaQoSAppliedConditionSourceUdpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source UDP port range start to use for traffic classification."
::= { alaQoSAppliedConditionEntry 75 }
alaQoSAppliedConditionSourceUdpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 76 }
alaQoSAppliedConditionSourceUdpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate
a range. When '0', use source UDP port as a single UDP port."
::= { alaQoSAppliedConditionEntry 77 }
alaQoSAppliedConditionDestinationUdpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination UDP port range start to use for traffic
classification."
::= { alaQoSAppliedConditionEntry 78 }
alaQoSAppliedConditionDestinationUdpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 79 }
alaQoSAppliedConditionDestinationUdpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port
as a single TCP port."
::= { alaQoSAppliedConditionEntry 80 }
alaQoSAppliedConditionEthertype OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Ethertype value to use for traffic classification"
::= { alaQoSAppliedConditionEntry 81 }
alaQoSAppliedConditionEthertypeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the ethertype value
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 82 }
alaQoSAppliedConditionTcpFlags OBJECT-TYPE
SYNTAX INTEGER {
all (1),
any (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Use any/all specifieid TCP flags for traffic classification"
::= { alaQoSAppliedConditionEntry 83 }
alaQoSAppliedConditionTcpFlagsStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the TCP flag bits
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 84 }
alaQoSAppliedConditionTcpFlagsVal OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP flags values used for traffic classification"
::= { alaQoSAppliedConditionEntry 85 }
alaQoSAppliedConditionTcpFlagsValStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Not used"
::= { alaQoSAppliedConditionEntry 86 }
alaQoSAppliedConditionTcpFlagsMask OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mask of TCP flags bits used for traffic classification"
::= { alaQoSAppliedConditionEntry 87 }
alaQoSAppliedConditionTcpFlagsMaskStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Not used"
::= { alaQoSAppliedConditionEntry 88 }
alaQoSAppliedConditionTcpEstablished OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Look for established TCP sessions in classification"
::= { alaQoSAppliedConditionEntry 89 }
alaQoSAppliedConditionSourceIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source IPv6 address to use for traffic classification"
::= { alaQoSAppliedConditionEntry 90 }
alaQoSAppliedConditionSourceIpv6AddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source IPv6 address & mask
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 91 }
alaQoSAppliedConditionSourceIpv6Mask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source IPv6 mask to use for traffic classification"
::= { alaQoSAppliedConditionEntry 92 }
alaQoSAppliedConditionDestinationIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination IPv6 address to use for traffic classification"
::= { alaQoSAppliedConditionEntry 93 }
alaQoSAppliedConditionDestinationIpv6AddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination IPv6 address & mask
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 94 }
alaQoSAppliedConditionDestinationIpv6Mask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination IPv6 mask to use for traffic classification"
::= { alaQoSAppliedConditionEntry 95 }
alaQoSAppliedConditionIpv6Traffic OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "classify IPV6 traffic "
::= { alaQoSAppliedConditionEntry 96 }
alaQoSAppliedConditionIpv6NH OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "NH value to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSAppliedConditionEntry 97 }
alaQoSAppliedConditionIpv6NHStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the NH value
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 98 }
alaQoSAppliedConditionIpv6FlowLabel OBJECT-TYPE
SYNTAX Integer32 (0..1048575)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "FL value to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSAppliedConditionEntry 99 }
alaQoSAppliedConditionIpv6FlowLabelStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the flow label value
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 100 }
alaQoSAppliedConditionMcastIpv6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Multicast IPv6 address to use for traffic classification"
DEFVAL { '00000000000000000000000000000000'h }
::= { alaQoSAppliedConditionEntry 101 }
alaQoSAppliedConditionMcastIpv6AddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the multicast IPv6 address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 102 }
alaQoSAppliedConditionMcastIpv6Mask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Multicast IPv6 mask to use for traffic classification"
DEFVAL { 'ffffffffffffffffffffffffffffffff'h }
::= { alaQoSAppliedConditionEntry 103 }
alaQoSAppliedConditionDscpEnd OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "DSCP value to use for traffic classification"
::= { alaQoSAppliedConditionEntry 104 }
alaQoSAppliedConditionInnerSourceVlan OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Customer VLAN to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSAppliedConditionEntry 105 }
alaQoSAppliedConditionInnerSourceVlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the inner VLAN
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 106 }
alaQoSAppliedConditionInner8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Customer 802.1p to use for traffic classification"
DEFVAL { 0 }
::= { alaQoSAppliedConditionEntry 107 }
alaQoSAppliedConditionInner8021pStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the inner 802.1p
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 108}
alaQoSAppliedConditionVrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name of Vrf to match traffic in"
::= { alaQoSAppliedConditionEntry 109 }
alaQoSAppliedConditionVrfNameStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 110 }
alaQoSAppliedConditionFragments OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TCP packet fragments"
DEFVAL { no }
::= { alaQoSAppliedConditionEntry 111 }
alaQoSAppliedConditionSourceChassis OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source physical chassis used for traffic classification."
::= { alaQoSAppliedConditionEntry 112 }
alaQoSAppliedConditionDestinationChassis OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination physical chassis used for traffic classification."
::= { alaQoSAppliedConditionEntry 113 }
alaQoSAppliedConditionAppFpGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..24))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Application Fingerprinting group."
::= { alaQoSAppliedConditionEntry 114 }
alaQoSAppliedConditionAppFpGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the traffic from a specific Application Fingerprinting Group needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 115 }
alaQoSAppliedConditionSIP OBJECT-TYPE
SYNTAX INTEGER {
audio (1),
video (2),
other (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SIP type to use for traffic classification"
DEFVAL { audio }
::= { alaQoSAppliedConditionEntry 116 }
alaQoSAppliedConditionSIPStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "SIP Status field indicates whether SIP is enabled or disabled
for traffic classification"
DEFVAL { enabled }
::= { alaQoSAppliedConditionEntry 117 }
alaQoSAppliedConditionDPIAppName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DPI Application Member."
::= { alaQoSAppliedConditionEntry 118 }
alaQoSAppliedConditionDPIAppGrp OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DPI Application Member Type."
::= { alaQoSAppliedConditionEntry 119 }
alaQoSAppliedConditionDPIAppNameStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DPI Status field indicates whether DPI Application name is enabled or disabled
for traffic classification"
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 120 }
alaQoSAppliedConditionDPIAppGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DPI Status field indicates whether DPI Application group is enabled or disabled
for traffic classification"
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 121 }
alaQoSAppliedConditionVxlanVni OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Vni value associated with this vxlan"
::= { alaQoSAppliedConditionEntry 122 }
alaQoSAppliedConditionVxlanVniStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the VNI needs
to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 123 }
alaQoSAppliedConditionVxlanPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION ""
::= { alaQoSAppliedConditionEntry 124 }
alaQoSAppliedConditionVxlanPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the VNI needs
to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 125 }
alaQoSAppliedConditionVmSourceMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source MAC address to use for traffic classification"
DEFVAL { '000000000000'h }
::= { alaQoSAppliedConditionEntry 126 }
alaQoSAppliedConditionVmSourceMacAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source MAC address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 127 }
alaQoSAppliedConditionVmSourceMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source MAC address to use for traffic classification"
DEFVAL { '000000000000'h }
::= { alaQoSAppliedConditionEntry 128 }
alaQoSAppliedConditionVmSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP address to use for traffic classification"
DEFVAL { '00000000'h }
::= { alaQoSAppliedConditionEntry 129 }
alaQoSAppliedConditionVmSourceIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 130 }
alaQoSAppliedConditionVmSourceIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP mask to use for traffic classification"
DEFVAL { 'ffffffff'h }
::= { alaQoSAppliedConditionEntry 131 }
alaQoSAppliedConditionVmSourceIpv6IpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IPV6 address to use for traffic classification"
DEFVAL { '00000000000000000000000000000000'h }
::= { alaQoSAppliedConditionEntry 132 }
alaQoSAppliedConditionVmSourceIpv6IpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source IP address & mask
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 133 }
alaQoSAppliedConditionVmSourceIpv6IpMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IPV6 mask to use for traffic classification"
DEFVAL { 'ffffffffffffffffffffffffffffffff'h }
::= { alaQoSAppliedConditionEntry 134 }
alaQoSAppliedConditionVmIpProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "IP protocol to use for traffic classification."
DEFVAL { 0 }
::= { alaQoSAppliedConditionEntry 135 }
alaQoSAppliedConditionVmIpProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the IP protocol
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 136 }
alaQosAppliedConditionVmL4SourcePort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP port to use for traffic classification."
::= { alaQoSAppliedConditionEntry 137 }
alaQosAppliedConditionVmL4SourcePortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source port
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 138 }
alaQosAppliedConditionVmL4DestPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination port to use for traffic
classification."
::= { alaQoSAppliedConditionEntry 139 }
alaQosAppliedConditionVmL4DestPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination port
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 140 }
alaQosAppliedConditionVxlanStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating vxlan configuration."
DEFVAL { disabled }
::= { alaQoSAppliedConditionEntry 141 }
alaQoSAppliedConditionSourcePortSplitGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source physical port split-group to be used for traffic classification. Meter action should be applied on per-port basis."
::= { alaQoSAppliedConditionEntry 142}
alaQoSAppliedConditionSourcePortSplitGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source physical port splitGroup
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedConditionEntry 143 }
--
-- Definition of service table
--
alaQoSServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS Service definitions"
::= { alaQoSMIBObjects 5 }
alaQoSServiceEntry OBJECT-TYPE
SYNTAX QoSServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS Service"
INDEX {
alaQoSServiceName
}
::= { alaQoSServiceTable 1 }
QoSServiceEntry ::=
SEQUENCE
{
alaQoSServiceName SnmpAdminString,
alaQoSServiceSource INTEGER,
alaQoSServiceProtocol Integer32,
alaQoSServiceSourceIpPort Integer32,
alaQoSServiceSourceIpPortStatus INTEGER,
alaQoSServiceDestinationIpPort Integer32,
alaQoSServiceDestinationIpPortStatus INTEGER,
alaQoSServiceRowStatus RowStatus,
alaQoSServiceSourceIpPortEnd Integer32,
alaQoSServiceDestinationIpPortEnd Integer32,
alaQoSServiceSourceTcpPort Integer32,
alaQoSServiceSourceTcpPortStatus INTEGER,
alaQoSServiceSourceTcpPortEnd Integer32,
alaQoSServiceDestinationTcpPort Integer32,
alaQoSServiceDestinationTcpPortStatus INTEGER,
alaQoSServiceDestinationTcpPortEnd Integer32,
alaQoSServiceSourceUdpPort Integer32,
alaQoSServiceSourceUdpPortStatus INTEGER,
alaQoSServiceSourceUdpPortEnd Integer32,
alaQoSServiceDestinationUdpPort Integer32,
alaQoSServiceDestinationUdpPortStatus INTEGER,
alaQoSServiceDestinationUdpPortEnd Integer32
}
alaQoSServiceName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of the service"
::= { alaQoSServiceEntry 1 }
alaQoSServiceSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What entity created the service."
DEFVAL { cli }
::= { alaQoSServiceEntry 2 }
alaQoSServiceProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "protocol field for Service"
DEFVAL { 0 }
::= { alaQoSServiceEntry 3 }
alaQoSServiceSourceIpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP port range start to use for traffic classification."
::= { alaQoSServiceEntry 4 }
alaQoSServiceSourceIpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSServiceEntry 5 }
alaQoSServiceDestinationIpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination IP port range start to use for traffic
classification."
::= { alaQoSServiceEntry 6 }
alaQoSServiceDestinationIpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSServiceEntry 7 }
alaQoSServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete services according to the
RowStatus convention"
::= { alaQoSServiceEntry 8 }
alaQoSServiceSourceIpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate
a range. When '0', use source IP port as a single IP port."
::= { alaQoSServiceEntry 9 }
alaQoSServiceDestinationIpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a single IP port."
::= { alaQoSServiceEntry 10 }
alaQoSServiceSourceTcpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source TCP port range start to use for traffic classification."
::= { alaQoSServiceEntry 11 }
alaQoSServiceSourceTcpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSServiceEntry 12 }
alaQoSServiceSourceTcpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP port."
::= { alaQoSServiceEntry 13 }
alaQoSServiceDestinationTcpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination TCP port range start to use for traffic
classification."
::= { alaQoSServiceEntry 14 }
alaQoSServiceDestinationTcpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSServiceEntry 15 }
alaQoSServiceDestinationTcpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port as
a single TCP port."
::= { alaQoSServiceEntry 16 }
alaQoSServiceSourceUdpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source UDP port range start to use for traffic classification."
::= { alaQoSServiceEntry 17 }
alaQoSServiceSourceUdpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSServiceEntry 18 }
alaQoSServiceSourceUdpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a
range. When '0', use source UDP port as a single UDP port."
::= { alaQoSServiceEntry 19 }
alaQoSServiceDestinationUdpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination UDP port range start to use for traffic
classification."
::= { alaQoSServiceEntry 20 }
alaQoSServiceDestinationUdpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSServiceEntry 21 }
alaQoSServiceDestinationUdpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port as
a single UDP port."
::= { alaQoSServiceEntry 22 }
--
-- Definition of service table
--
alaQoSAppliedServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedService definitions"
::= { alaQoSMIBObjects 6 }
alaQoSAppliedServiceEntry OBJECT-TYPE
SYNTAX QoSAppliedServiceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedService"
INDEX {
alaQoSAppliedServiceName
}
::= { alaQoSAppliedServiceTable 1 }
QoSAppliedServiceEntry ::=
SEQUENCE
{
alaQoSAppliedServiceName SnmpAdminString,
alaQoSAppliedServiceSource INTEGER,
alaQoSAppliedServiceProtocol Integer32,
alaQoSAppliedServiceSourceIpPort Integer32,
alaQoSAppliedServiceSourceIpPortStatus INTEGER,
alaQoSAppliedServiceDestinationIpPort Integer32,
alaQoSAppliedServiceDestinationIpPortStatus INTEGER,
alaQoSAppliedServiceRowStatus RowStatus,
alaQoSAppliedServiceSourceIpPortEnd Integer32,
alaQoSAppliedServiceDestinationIpPortEnd Integer32,
alaQoSAppliedServiceSourceTcpPort Integer32,
alaQoSAppliedServiceSourceTcpPortStatus INTEGER,
alaQoSAppliedServiceSourceTcpPortEnd Integer32,
alaQoSAppliedServiceDestinationTcpPort Integer32,
alaQoSAppliedServiceDestinationTcpPortStatus INTEGER,
alaQoSAppliedServiceDestinationTcpPortEnd Integer32,
alaQoSAppliedServiceSourceUdpPort Integer32,
alaQoSAppliedServiceSourceUdpPortStatus INTEGER,
alaQoSAppliedServiceSourceUdpPortEnd Integer32,
alaQoSAppliedServiceDestinationUdpPort Integer32,
alaQoSAppliedServiceDestinationUdpPortStatus INTEGER,
alaQoSAppliedServiceDestinationUdpPortEnd Integer32
}
alaQoSAppliedServiceName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of the service"
::= { alaQoSAppliedServiceEntry 1 }
alaQoSAppliedServiceSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What entity created the service."
::= { alaQoSAppliedServiceEntry 2 }
alaQoSAppliedServiceProtocol OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "protocol field for AppliedService"
::= { alaQoSAppliedServiceEntry 3 }
alaQoSAppliedServiceSourceIpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source IP port range start to use for traffic classification."
::= { alaQoSAppliedServiceEntry 4 }
alaQoSAppliedServiceSourceIpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source IP port range
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedServiceEntry 5 }
alaQoSAppliedServiceDestinationIpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination IP port range start to use for traffic
classification."
::= { alaQoSAppliedServiceEntry 6 }
alaQoSAppliedServiceDestinationIpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination IP port range
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedServiceEntry 7 }
alaQoSAppliedServiceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete services according to the
RowStatus convention"
::= { alaQoSAppliedServiceEntry 8 }
alaQoSAppliedServiceSourceIpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source IP port range end to use for traffic classification.
Must be greater than source IP port range start to indicate
a range. When '0', use source IP port as a single IP port."
::= { alaQoSAppliedServiceEntry 9 }
alaQoSAppliedServiceDestinationIpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination IP port range end to use for traffic classification.
Must be greater than destination IP port range start to indicate
a range. When '0', use destination IP port as a single IP port."
::= { alaQoSAppliedServiceEntry 10 }
alaQoSAppliedServiceSourceTcpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source TCP port range start to use for traffic classification."
::= { alaQoSAppliedServiceEntry 11 }
alaQoSAppliedServiceSourceTcpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source TCP port range
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedServiceEntry 12 }
alaQoSAppliedServiceSourceTcpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source TCP port range end to use for traffic classification.
Must be greater than source TCP port range start to indicate a
range. When '0', use source TCP port as a single TCP port."
::= { alaQoSAppliedServiceEntry 13 }
alaQoSAppliedServiceDestinationTcpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination TCP port range start to use for traffic
classification."
::= { alaQoSAppliedServiceEntry 14 }
alaQoSAppliedServiceDestinationTcpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination TCP port range
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedServiceEntry 15 }
alaQoSAppliedServiceDestinationTcpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination TCP port range end to use for traffic
classification. Must be greater than destination TCP port range
start to indicate a range. When '0', use destination TCP port as
a single TCP port."
::= { alaQoSAppliedServiceEntry 16 }
alaQoSAppliedServiceSourceUdpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source UDP port range start to use for traffic classification."
::= { alaQoSAppliedServiceEntry 17 }
alaQoSAppliedServiceSourceUdpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the source UDP port range
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedServiceEntry 18 }
alaQoSAppliedServiceSourceUdpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source UDP port range end to use for traffic classification.
Must be greater than source UDP port range start to indicate a
range. When '0', use source UDP port as a single UDP port."
::= { alaQoSAppliedServiceEntry 19 }
alaQoSAppliedServiceDestinationUdpPort OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination UDP port range start to use for traffic
classification."
::= { alaQoSAppliedServiceEntry 20 }
alaQoSAppliedServiceDestinationUdpPortStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the destination UDP port range
needs to be matched(enabled) or not(disabled)."
::= { alaQoSAppliedServiceEntry 21 }
alaQoSAppliedServiceDestinationUdpPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination UDP port range end to use for traffic
classification. Must be greater than destination UDP port range
start to indicate a range. When '0', use destination UDP port as
a single UDP port."
::= { alaQoSAppliedServiceEntry 22 }
--
-- Definition of service group table
--
alaQoSServiceGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSServiceGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS ServiceGroups definitions"
::= { alaQoSMIBObjects 7 }
alaQoSServiceGroupsEntry OBJECT-TYPE
SYNTAX QoSServiceGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS ServiceGroups"
INDEX {
alaQoSServiceGroupsName
}
::= { alaQoSServiceGroupsTable 1 }
QoSServiceGroupsEntry ::=
SEQUENCE
{
alaQoSServiceGroupsName SnmpAdminString,
alaQoSServiceGroupsSource INTEGER,
alaQoSServiceGroupsStatus RowStatus
}
alaQoSServiceGroupsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of service group"
::= { alaQoSServiceGroupsEntry 1 }
alaQoSServiceGroupsSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What entity created the service group."
DEFVAL { cli }
::= { alaQoSServiceGroupsEntry 2 }
alaQoSServiceGroupsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete service groups according to the
RowStatus convention"
::= { alaQoSServiceGroupsEntry 3 }
--
-- Definition of service group table
--
alaQoSAppliedServiceGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedServiceGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedServiceGroups definitions"
::= { alaQoSMIBObjects 8 }
alaQoSAppliedServiceGroupsEntry OBJECT-TYPE
SYNTAX QoSAppliedServiceGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedServiceGroups"
INDEX {
alaQoSAppliedServiceGroupsName
}
::= { alaQoSAppliedServiceGroupsTable 1 }
QoSAppliedServiceGroupsEntry ::=
SEQUENCE
{
alaQoSAppliedServiceGroupsName SnmpAdminString,
alaQoSAppliedServiceGroupsSource INTEGER,
alaQoSAppliedServiceGroupsStatus RowStatus
}
alaQoSAppliedServiceGroupsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of service group"
::= { alaQoSAppliedServiceGroupsEntry 1 }
alaQoSAppliedServiceGroupsSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What entity created the service group."
::= { alaQoSAppliedServiceGroupsEntry 2 }
alaQoSAppliedServiceGroupsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete service groups according to the
RowStatus convention"
::= { alaQoSAppliedServiceGroupsEntry 3 }
--
-- Definition of service group entry table
--
alaQoSServiceGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSServiceGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS ServiceGroup definitions"
::= { alaQoSMIBObjects 9 }
alaQoSServiceGroupEntry OBJECT-TYPE
SYNTAX QoSServiceGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS ServiceGroup"
INDEX {
alaQoSServiceGroupsName,
alaQoSServiceGroupServiceName
}
::= { alaQoSServiceGroupTable 1 }
QoSServiceGroupEntry ::=
SEQUENCE
{
alaQoSServiceGroupServiceName SnmpAdminString,
alaQoSServiceGroupStatus RowStatus
}
alaQoSServiceGroupServiceName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of service in service group entry"
::= { alaQoSServiceGroupEntry 1 }
alaQoSServiceGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete service group entries according to the
RowStatus convention"
::= { alaQoSServiceGroupEntry 2 }
--
-- Definition of service group entry table
--
alaQoSAppliedServiceGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedServiceGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedServiceGroup definitions"
::= { alaQoSMIBObjects 10 }
alaQoSAppliedServiceGroupEntry OBJECT-TYPE
SYNTAX QoSAppliedServiceGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedServiceGroup"
INDEX {
alaQoSAppliedServiceGroupsName,
alaQoSAppliedServiceGroupServiceName
}
::= { alaQoSAppliedServiceGroupTable 1 }
QoSAppliedServiceGroupEntry ::=
SEQUENCE
{
alaQoSAppliedServiceGroupServiceName SnmpAdminString,
alaQoSAppliedServiceGroupStatus RowStatus
}
alaQoSAppliedServiceGroupServiceName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of service in service group entry"
::= { alaQoSAppliedServiceGroupEntry 1 }
alaQoSAppliedServiceGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete service group entries according to the
RowStatus convention"
::= { alaQoSAppliedServiceGroupEntry 2 }
--
-- Definition of network group table
--
alaQoSNetworkGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNetworkGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS NetworkGroups definitions"
::= { alaQoSMIBObjects 11 }
alaQoSNetworkGroupsEntry OBJECT-TYPE
SYNTAX QoSNetworkGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS NetworkGroups"
INDEX {
alaQoSNetworkGroupsName
}
::= { alaQoSNetworkGroupsTable 1 }
QoSNetworkGroupsEntry ::=
SEQUENCE
{
alaQoSNetworkGroupsName SnmpAdminString,
alaQoSNetworkGroupsSource INTEGER,
alaQoSNetworkGroupsStatus RowStatus
}
alaQoSNetworkGroupsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of network group"
::= { alaQoSNetworkGroupsEntry 1 }
alaQoSNetworkGroupsSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What entity created the network group."
DEFVAL { cli }
::= { alaQoSNetworkGroupsEntry 2 }
alaQoSNetworkGroupsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete network groups according to the
RowStatus convention"
::= { alaQoSNetworkGroupsEntry 3 }
--
-- Definition of network group table
--
alaQoSAppliedNetworkGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedNetworkGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedNetworkGroups definitions"
::= { alaQoSMIBObjects 12 }
alaQoSAppliedNetworkGroupsEntry OBJECT-TYPE
SYNTAX QoSAppliedNetworkGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedNetworkGroups"
INDEX {
alaQoSAppliedNetworkGroupsName
}
::= { alaQoSAppliedNetworkGroupsTable 1 }
QoSAppliedNetworkGroupsEntry ::=
SEQUENCE
{
alaQoSAppliedNetworkGroupsName SnmpAdminString,
alaQoSAppliedNetworkGroupsSource INTEGER,
alaQoSAppliedNetworkGroupsStatus RowStatus
}
alaQoSAppliedNetworkGroupsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of network group"
::= { alaQoSAppliedNetworkGroupsEntry 1 }
alaQoSAppliedNetworkGroupsSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What entity created the network group."
::= { alaQoSAppliedNetworkGroupsEntry 2 }
alaQoSAppliedNetworkGroupsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete network groups according to the
RowStatus convention"
::= { alaQoSAppliedNetworkGroupsEntry 3 }
--
-- Definition of network group entry table
--
alaQoSNetworkGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSNetworkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS NetworkGroup definitions"
::= { alaQoSMIBObjects 13 }
alaQoSNetworkGroupEntry OBJECT-TYPE
SYNTAX QoSNetworkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS NetworkGroup"
INDEX {
alaQoSNetworkGroupsName,
alaQoSNetworkGroupIpAddr,
alaQoSNetworkGroupIpMask
}
::= { alaQoSNetworkGroupTable 1 }
QoSNetworkGroupEntry ::=
SEQUENCE
{
alaQoSNetworkGroupIpAddr IpAddress,
alaQoSNetworkGroupIpMask IpAddress,
alaQoSNetworkGroupStatus RowStatus
}
alaQoSNetworkGroupIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP address for network group entry."
::= { alaQoSNetworkGroupEntry 1 }
alaQoSNetworkGroupIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP mask for network group entry."
::= { alaQoSNetworkGroupEntry 2 }
alaQoSNetworkGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete network group entries according to the
RowStatus convention"
::= { alaQoSNetworkGroupEntry 3 }
--
-- Definition of network group entry table
--
alaQoSAppliedNetworkGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedNetworkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedNetworkGroup definitions"
::= { alaQoSMIBObjects 14 }
alaQoSAppliedNetworkGroupEntry OBJECT-TYPE
SYNTAX QoSAppliedNetworkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedNetworkGroup"
INDEX {
alaQoSAppliedNetworkGroupsName,
alaQoSAppliedNetworkGroupIpAddr,
alaQoSAppliedNetworkGroupIpMask
}
::= { alaQoSAppliedNetworkGroupTable 1 }
QoSAppliedNetworkGroupEntry ::=
SEQUENCE
{
alaQoSAppliedNetworkGroupIpAddr IpAddress,
alaQoSAppliedNetworkGroupIpMask IpAddress,
alaQoSAppliedNetworkGroupStatus RowStatus
}
alaQoSAppliedNetworkGroupIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP address for network group entry."
::= { alaQoSAppliedNetworkGroupEntry 1 }
alaQoSAppliedNetworkGroupIpMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP mask for network group entry."
::= { alaQoSAppliedNetworkGroupEntry 2 }
alaQoSAppliedNetworkGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete network group entries according to the
RowStatus convention"
::= { alaQoSAppliedNetworkGroupEntry 3 }
--
-- Definition of mac group table
--
alaQoSMACGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSMACGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS MACGroups definitions"
::= { alaQoSMIBObjects 15 }
alaQoSMACGroupsEntry OBJECT-TYPE
SYNTAX QoSMACGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS MACGroups"
INDEX {
alaQoSMACGroupsName
}
::= { alaQoSMACGroupsTable 1 }
QoSMACGroupsEntry ::=
SEQUENCE
{
alaQoSMACGroupsName SnmpAdminString,
alaQoSMACGroupsSource INTEGER,
alaQoSMACGroupsStatus RowStatus
}
alaQoSMACGroupsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of MAC group"
::= { alaQoSMACGroupsEntry 1 }
alaQoSMACGroupsSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What entity created the MAC group."
DEFVAL { cli }
::= { alaQoSMACGroupsEntry 2 }
alaQoSMACGroupsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete MAC groups according to the
RowStatus convention"
::= { alaQoSMACGroupsEntry 3 }
--
-- Definition of mac group table
--
alaQoSAppliedMACGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedMACGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedMACGroups definitions"
::= { alaQoSMIBObjects 16 }
alaQoSAppliedMACGroupsEntry OBJECT-TYPE
SYNTAX QoSAppliedMACGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedMACGroups"
INDEX {
alaQoSAppliedMACGroupsName
}
::= { alaQoSAppliedMACGroupsTable 1 }
QoSAppliedMACGroupsEntry ::=
SEQUENCE
{
alaQoSAppliedMACGroupsName SnmpAdminString,
alaQoSAppliedMACGroupsSource INTEGER,
alaQoSAppliedMACGroupsStatus RowStatus
}
alaQoSAppliedMACGroupsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of MAC group"
::= { alaQoSAppliedMACGroupsEntry 1 }
alaQoSAppliedMACGroupsSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What entity created the MAC group."
::= { alaQoSAppliedMACGroupsEntry 2 }
alaQoSAppliedMACGroupsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete MAC groups according to the
RowStatus convention"
::= { alaQoSAppliedMACGroupsEntry 3 }
--
-- Definition of MAC group entry table
--
alaQoSMACGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSMACGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS MACGroup definitions"
::= { alaQoSMIBObjects 17 }
alaQoSMACGroupEntry OBJECT-TYPE
SYNTAX QoSMACGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS MACGroup"
INDEX {
alaQoSMACGroupsName,
alaQoSMACGroupMacAddr,
alaQoSMACGroupMacMask
}
::= { alaQoSMACGroupTable 1 }
QoSMACGroupEntry ::=
SEQUENCE
{
alaQoSMACGroupMacAddr MacAddress,
alaQoSMACGroupMacMask MacAddress,
alaQoSMACGroupStatus RowStatus
}
alaQoSMACGroupMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MAC address for MAC group entry"
::= { alaQoSMACGroupEntry 1 }
alaQoSMACGroupMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MAC mask for MAC group entry"
::= { alaQoSMACGroupEntry 2 }
alaQoSMACGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete MAC group entries according to the
RowStatus convention"
::= { alaQoSMACGroupEntry 3 }
--
-- Definition of MAC group entry table
--
alaQoSAppliedMACGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedMACGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedMACGroup definitions"
::= { alaQoSMIBObjects 18 }
alaQoSAppliedMACGroupEntry OBJECT-TYPE
SYNTAX QoSAppliedMACGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedMACGroup"
INDEX {
alaQoSAppliedMACGroupsName,
alaQoSAppliedMACGroupMacAddr,
alaQoSAppliedMACGroupMacMask
}
::= { alaQoSAppliedMACGroupTable 1 }
QoSAppliedMACGroupEntry ::=
SEQUENCE
{
alaQoSAppliedMACGroupMacAddr MacAddress,
alaQoSAppliedMACGroupMacMask MacAddress,
alaQoSAppliedMACGroupStatus RowStatus
}
alaQoSAppliedMACGroupMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MAC address for MAC group entry"
::= { alaQoSAppliedMACGroupEntry 1 }
alaQoSAppliedMACGroupMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "MAC mask for MAC group entry"
::= { alaQoSAppliedMACGroupEntry 2 }
alaQoSAppliedMACGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete MAC group entries according to the
RowStatus convention"
::= { alaQoSAppliedMACGroupEntry 3 }
--
-- Definition of port group table
--
alaQoSPortGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSPortGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS PortGroups definitions"
::= { alaQoSMIBObjects 19 }
alaQoSPortGroupsEntry OBJECT-TYPE
SYNTAX QoSPortGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS PortGroups"
INDEX {
alaQoSPortGroupsName
}
::= { alaQoSPortGroupsTable 1 }
QoSPortGroupsEntry ::=
SEQUENCE
{
alaQoSPortGroupsName SnmpAdminString,
alaQoSPortGroupsSource INTEGER,
alaQoSPortGroupsStatus RowStatus
}
alaQoSPortGroupsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of port group"
::= { alaQoSPortGroupsEntry 1 }
alaQoSPortGroupsSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What entity created the port group."
DEFVAL { cli }
::= { alaQoSPortGroupsEntry 2 }
alaQoSPortGroupsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete port groups according to the
RowStatus convention"
::= { alaQoSPortGroupsEntry 3 }
--
-- Definition of port group table
--
alaQoSAppliedPortGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedPortGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedPortGroups definitions"
::= { alaQoSMIBObjects 20 }
alaQoSAppliedPortGroupsEntry OBJECT-TYPE
SYNTAX QoSAppliedPortGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedPortGroups"
INDEX {
alaQoSAppliedPortGroupsName
}
::= { alaQoSAppliedPortGroupsTable 1 }
QoSAppliedPortGroupsEntry ::=
SEQUENCE
{
alaQoSAppliedPortGroupsName SnmpAdminString,
alaQoSAppliedPortGroupsSource INTEGER,
alaQoSAppliedPortGroupsStatus RowStatus
}
alaQoSAppliedPortGroupsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of port group"
::= { alaQoSAppliedPortGroupsEntry 1 }
alaQoSAppliedPortGroupsSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What entity created the port group."
::= { alaQoSAppliedPortGroupsEntry 2 }
alaQoSAppliedPortGroupsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete port groups according to the
RowStatus convention"
::= { alaQoSAppliedPortGroupsEntry 3 }
--
-- Definition of port group entry table
--
alaQoSPortGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSPortGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS PortGroup definitions"
::= { alaQoSMIBObjects 21 }
alaQoSPortGroupEntry OBJECT-TYPE
SYNTAX QoSPortGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS PortGroup"
INDEX {
alaQoSPortGroupsName,
alaQoSPortGroupSlot,
alaQoSPortGroupPort,
alaQoSPortGroupPortEnd
}
::= { alaQoSPortGroupTable 1 }
QoSPortGroupEntry ::=
SEQUENCE
{
alaQoSPortGroupSlot Integer32,
alaQoSPortGroupPort Integer32,
alaQoSPortGroupStatus RowStatus,
alaQoSPortGroupPortEnd Integer32
}
alaQoSPortGroupSlot OBJECT-TYPE
SYNTAX Integer32 (0..6016)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Physical slot for port group entry.
If this is a virtual chassis environemnt,
This will contain the ChassisId*1000 + slotNum."
::= { alaQoSPortGroupEntry 1 }
alaQoSPortGroupPort OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Physical port range start for port group entry"
::= { alaQoSPortGroupEntry 2 }
alaQoSPortGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete port group entries according to the
RowStatus convention"
::= { alaQoSPortGroupEntry 3 }
alaQoSPortGroupPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Physical port range end for port group entry
Must be greater than port range start to indicate a range.
When '1', use port as a single port."
::= { alaQoSPortGroupEntry 4 }
--
-- Definition of port group entry table
--
alaQoSAppliedPortGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedPortGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedPortGroup definitions"
::= { alaQoSMIBObjects 22 }
alaQoSAppliedPortGroupEntry OBJECT-TYPE
SYNTAX QoSAppliedPortGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedPortGroup"
INDEX {
alaQoSAppliedPortGroupsName,
alaQoSAppliedPortGroupSlot,
alaQoSAppliedPortGroupPort,
alaQoSAppliedPortGroupPortEnd
}
::= { alaQoSAppliedPortGroupTable 1 }
QoSAppliedPortGroupEntry ::=
SEQUENCE
{
alaQoSAppliedPortGroupSlot Integer32,
alaQoSAppliedPortGroupPort Integer32,
alaQoSAppliedPortGroupStatus RowStatus,
alaQoSAppliedPortGroupPortEnd Integer32
}
alaQoSAppliedPortGroupSlot OBJECT-TYPE
SYNTAX Integer32 (1..6016)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Physical slot for port group entry
If this is a virtual chassis environemnt,
This will contain the ChassisId*1000 + slotNum."
::= { alaQoSAppliedPortGroupEntry 1 }
alaQoSAppliedPortGroupPort OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Physical port range start for port group entry"
::= { alaQoSAppliedPortGroupEntry 2 }
alaQoSAppliedPortGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete port group entries according to the
RowStatus convention"
::= { alaQoSAppliedPortGroupEntry 3 }
alaQoSAppliedPortGroupPortEnd OBJECT-TYPE
SYNTAX Integer32 (0..52)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Physical port range end for port group entry
Must be greater than port range start to indicate a range.
When '1', use port as a single port."
::= { alaQoSAppliedPortGroupEntry 4 }
--
-- Definition of map group table
--
alaQoSMapGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSMapGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS MapGroups definitions"
::= { alaQoSMIBObjects 23 }
alaQoSMapGroupsEntry OBJECT-TYPE
SYNTAX QoSMapGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS MapGroups"
INDEX {
alaQoSMapGroupsName
}
::= { alaQoSMapGroupsTable 1 }
QoSMapGroupsEntry ::=
SEQUENCE
{
alaQoSMapGroupsName SnmpAdminString,
alaQoSMapGroupsSource INTEGER,
alaQoSMapGroupsStatus RowStatus
}
alaQoSMapGroupsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of map group"
::= { alaQoSMapGroupsEntry 1 }
alaQoSMapGroupsSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What entity created the map group."
DEFVAL { cli }
::= { alaQoSMapGroupsEntry 2 }
alaQoSMapGroupsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete map groups according to the
RowStatus convention"
::= { alaQoSMapGroupsEntry 3 }
--
-- Definition of map group table
--
alaQoSAppliedMapGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedMapGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedMapGroups definitions"
::= { alaQoSMIBObjects 24 }
alaQoSAppliedMapGroupsEntry OBJECT-TYPE
SYNTAX QoSAppliedMapGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedMapGroups"
INDEX {
alaQoSAppliedMapGroupsName
}
::= { alaQoSAppliedMapGroupsTable 1 }
QoSAppliedMapGroupsEntry ::=
SEQUENCE
{
alaQoSAppliedMapGroupsName SnmpAdminString,
alaQoSAppliedMapGroupsSource INTEGER,
alaQoSAppliedMapGroupsStatus RowStatus
}
alaQoSAppliedMapGroupsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of map group"
::= { alaQoSAppliedMapGroupsEntry 1 }
alaQoSAppliedMapGroupsSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What entity created the map group."
::= { alaQoSAppliedMapGroupsEntry 2 }
alaQoSAppliedMapGroupsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete map groups according to the
RowStatus convention"
::= { alaQoSAppliedMapGroupsEntry 3 }
--
-- Definition of map group entry table
--
alaQoSMapGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSMapGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS MapGroup definitions"
::= { alaQoSMIBObjects 25 }
alaQoSMapGroupEntry OBJECT-TYPE
SYNTAX QoSMapGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS MapGroup"
INDEX {
alaQoSMapGroupsName,
alaQoSMapGroupKey,
alaQoSMapGroupKeyEnd,
alaQoSMapGroupValue
}
::= { alaQoSMapGroupTable 1 }
QoSMapGroupEntry ::=
SEQUENCE
{
alaQoSMapGroupKey Integer32,
alaQoSMapGroupKeyEnd Integer32,
alaQoSMapGroupValue Integer32,
alaQoSMapGroupStatus RowStatus
}
alaQoSMapGroupKey OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Key range start of map group entry."
::= { alaQoSMapGroupEntry 1 }
alaQoSMapGroupKeyEnd OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Key range end for map group entries. Key range end
must be greater than key range start to indicate a range.
When '0', use key range start as a single key."
::= { alaQoSMapGroupEntry 2 }
alaQoSMapGroupValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Value for map group entries. Value to stamp on traffic when
keys in the proper range are seen."
::= { alaQoSMapGroupEntry 3 }
alaQoSMapGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete map group entries according to the
RowStatus convention"
::= { alaQoSMapGroupEntry 4 }
--
-- Definition of map group entry table
--
alaQoSAppliedMapGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedMapGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedMapGroup definitions"
::= { alaQoSMIBObjects 26 }
alaQoSAppliedMapGroupEntry OBJECT-TYPE
SYNTAX QoSAppliedMapGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedMapGroup"
INDEX {
alaQoSAppliedMapGroupsName,
alaQoSAppliedMapGroupKey,
alaQoSAppliedMapGroupKeyEnd,
alaQoSAppliedMapGroupValue
}
::= { alaQoSAppliedMapGroupTable 1 }
QoSAppliedMapGroupEntry ::=
SEQUENCE
{
alaQoSAppliedMapGroupKey Integer32,
alaQoSAppliedMapGroupKeyEnd Integer32,
alaQoSAppliedMapGroupValue Integer32,
alaQoSAppliedMapGroupStatus RowStatus
}
alaQoSAppliedMapGroupKey OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Key range start of map group entry."
::= { alaQoSAppliedMapGroupEntry 1 }
alaQoSAppliedMapGroupKeyEnd OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Key range end for map group entries. Key range end
must be greater than key range start to indicate a range.
When '0', use key range start as a single key."
::= { alaQoSAppliedMapGroupEntry 2 }
alaQoSAppliedMapGroupValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Value for map group entries. Value to stamp on traffic when
keys in the proper range are seen."
::= { alaQoSAppliedMapGroupEntry 3 }
alaQoSAppliedMapGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete map group entries according to the
RowStatus convention"
::= { alaQoSAppliedMapGroupEntry 4 }
--
-- Definition of action table
--
alaQoSActionTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS Action definitions"
::= { alaQoSMIBObjects 27 }
alaQoSActionEntry OBJECT-TYPE
SYNTAX QoSActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS Action"
INDEX {
alaQoSActionName
}
::= { alaQoSActionTable 1 }
QoSActionEntry ::=
SEQUENCE
{
alaQoSActionName SnmpAdminString,
alaQoSActionSource INTEGER,
alaQoSActionDisposition INTEGER,
alaQoSActionMaximumBandwidth Integer32,
alaQoSActionMaximumBandwidthStatus INTEGER,
alaQoSActionPriority Integer32,
alaQoSActionPriorityStatus INTEGER,
alaQoSActionShared INTEGER,
alaQoSActionMaximumDepth Integer32,
alaQoSActionMaximumDepthStatus INTEGER,
alaQoSAction8021p Integer32,
alaQoSAction8021pStatus INTEGER,
alaQoSActionTos Integer32,
alaQoSActionTosStatus INTEGER,
alaQoSActionDscp Integer32,
alaQoSActionDscpStatus INTEGER,
alaQoSActionMapFrom INTEGER,
alaQoSActionMapTo INTEGER,
alaQoSActionMapGroup SnmpAdminString,
alaQoSActionMapGroupStatus INTEGER,
alaQoSActionLoadBalanceGroup SnmpAdminString,
alaQoSActionLoadBalanceGroupStatus INTEGER,
alaQoSActionPermanentGatewayIpAddr IpAddress,
alaQoSActionPermanentGatewayIpAddrStatus INTEGER,
alaQoSActionAlternateGatewayIpAddr IpAddress,
alaQoSActionAlternateGatewayIpAddrStatus INTEGER,
alaQoSActionRowStatus RowStatus,
alaQoSActionNocache INTEGER,
alaQoSActionPortdisable INTEGER,
alaQoSActionRedirectSlot Integer32,
alaQoSActionRedirectSlotStatus INTEGER,
alaQoSActionRedirectPort Integer32,
alaQoSActionRedirectAgg Integer32,
alaQoSActionRedirectAggStatus INTEGER,
alaQoSActionMirrorSlot Integer32,
alaQoSActionMirrorPort Integer32,
alaQoSActionMirrorMode INTEGER,
alaQoSActionMirrorModeStatus INTEGER,
alaQoSActionCIR Integer32,
alaQoSActionCIRStatus INTEGER,
alaQoSActionCBS Integer32,
alaQoSActionCBSStatus INTEGER,
alaQoSActionPIR Integer32,
alaQoSActionPIRStatus INTEGER,
alaQoSActionPBS Integer32,
alaQoSActionPBSStatus INTEGER,
alaQoSActionCPUPriority Integer32,
alaQoSActionCPUPriorityStatus INTEGER,
alaQoSActionColorOnly INTEGER,
alaQoSActionRedirectChassis Integer32,
alaQoSActionMirrorChassis Integer32,
alaQoSActionPermanentGatewayIpV6Addr Ipv6Address,
alaQoSActionPermanentGatewayIpV6AddrStatus INTEGER,
alaQoSActionPermanentGatewayIpV6IfIndex Ipv6IfIndexOrZero,
alaQoSActionRTCPMonitor INTEGER,
alaQoSActionRTCPMonitorStatus INTEGER,
alaQoSActionRTCPDSCP Integer32,
alaQoSActionRTCPDSCPStatus INTEGER,
alaQoSActionTrustDSCP INTEGER,
alaQoSActionTrustDSCPStatus INTEGER,
alaQoSActionRedirectModule INTEGER
}
alaQoSActionName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of action"
::= { alaQoSActionEntry 1 }
alaQoSActionSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What entity created the action."
DEFVAL { cli }
::= { alaQoSActionEntry 2 }
alaQoSActionDisposition OBJECT-TYPE
SYNTAX INTEGER {
accept (1),
drop (2),
deny (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Disposition of traffic using the action.
Use to filter out unwanted traffic."
DEFVAL { accept }
::= { alaQoSActionEntry 3 }
alaQoSActionMaximumBandwidth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Maximum bandwidth (Kbits/sec) allowed for traffic"
DEFVAL { 0 }
::= { alaQoSActionEntry 4 }
alaQoSActionMaximumBandwidthStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether maximum bandwidth
is specified(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 5 }
alaQoSActionPriority OBJECT-TYPE
SYNTAX Integer32 (0..12)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Internal and queueing priority to use for traffic."
DEFVAL { 0 }
::= { alaQoSActionEntry 6 }
alaQoSActionPriorityStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether priority
is specified(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 7 }
alaQoSActionShared OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When enabled, try and share any resources
(queues/limiters/descriptors) when more than one policy uses
the same action."
DEFVAL { no }
::= { alaQoSActionEntry 8 }
alaQoSActionMaximumDepth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Maximum depth (Kbytes) of queues for traffic.
Used for EBS in tri-color marker applications."
DEFVAL { 0 }
::= { alaQoSActionEntry 9 }
alaQoSActionMaximumDepthStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether maximum depth
is specified(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 10 }
alaQoSAction8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "802.1p value to stamp on traffic."
DEFVAL { 0 }
::= { alaQoSActionEntry 11 }
alaQoSAction8021pStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether 802.1p
is specified(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 12 }
alaQoSActionTos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "TOS value to stamp on traffic. (High 3 bits of TOS byte)"
DEFVAL { 0 }
::= { alaQoSActionEntry 13 }
alaQoSActionTosStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether TOS
is specified(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 14 }
alaQoSActionDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "TOS value to stamp on traffic. (High 6 bits of TOS byte)"
DEFVAL { 0 }
::= { alaQoSActionEntry 15 }
alaQoSActionDscpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether DSCP
is specified(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 16 }
alaQoSActionMapFrom OBJECT-TYPE
SYNTAX INTEGER {
b8021p (1),
tos (2),
dscp (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What field to use as key for mapping 802.1p/TOS/DSCP priorities"
DEFVAL { b8021p }
::= { alaQoSActionEntry 17 }
alaQoSActionMapTo OBJECT-TYPE
SYNTAX INTEGER {
b8021p (1),
tos (2),
dscp (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What field to rewrite due to remapping 802.1p/TOS/DSCP
priorities"
DEFVAL { b8021p }
::= { alaQoSActionEntry 18 }
alaQoSActionMapGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name of the map group to use when remapping 802.1p/TOS/DSCP
priorities."
::= { alaQoSActionEntry 19 }
alaQoSActionMapGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether a map group
is specified(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 20 }
alaQoSActionLoadBalanceGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..23))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Name of load balance group to use for traffic"
::= { alaQoSActionEntry 21 }
alaQoSActionLoadBalanceGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether load balanace group
is specified(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 22 }
alaQoSActionPermanentGatewayIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Next hop gateway to use for traffic"
DEFVAL { '00000000'h }
::= { alaQoSActionEntry 23 }
alaQoSActionPermanentGatewayIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether permanent gateway IP address
is specified(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 24 }
alaQoSActionAlternateGatewayIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Next hop gateway to use for traffic that doesn't have an
explicit route. Use this gateway instead of default routes."
DEFVAL { '00000000'h }
::= { alaQoSActionEntry 25 }
alaQoSActionAlternateGatewayIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether alternate gateway IP address
is specified(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 26 }
alaQoSActionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete actions according to the
RowStatus convention"
::= { alaQoSActionEntry 27 }
alaQoSActionNocache OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When enabled, don't make hardware entries for matching flows."
DEFVAL { no }
::= { alaQoSActionEntry 28 }
alaQoSActionPortdisable OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "When enabled, disable the physical source port of the traffic."
DEFVAL { no }
::= { alaQoSActionEntry 29 }
alaQoSActionRedirectSlot OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination physical slot for redirected traffic"
DEFVAL { 1 }
::= { alaQoSActionEntry 30 }
alaQoSActionRedirectSlotStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status for alaQoSActionRedirectSlotStatus field"
DEFVAL { disabled }
::= { alaQoSActionEntry 31 }
alaQoSActionRedirectPort OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination physical port for redirected traffic"
DEFVAL { 1 }
::= { alaQoSActionEntry 32 }
alaQoSActionRedirectAgg OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination linkagg for redirected traffic"
DEFVAL { 0 }
::= { alaQoSActionEntry 33 }
alaQoSActionRedirectAggStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status for alaQoSActionRedirectAggStatus field"
DEFVAL { disabled }
::= { alaQoSActionEntry 34 }
alaQoSActionMirrorSlot OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination physical slot for mirrored traffic"
DEFVAL { 1 }
::= { alaQoSActionEntry 35 }
alaQoSActionMirrorPort OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination physical port for mirrored traffic"
DEFVAL { 1 }
::= { alaQoSActionEntry 36 }
alaQoSActionMirrorMode OBJECT-TYPE
SYNTAX INTEGER {
ingress(1),
egress(2),
both(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Mirroring mode"
DEFVAL { ingress }
::= { alaQoSActionEntry 37 }
alaQoSActionMirrorModeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status for alaQoSActionMirrorMode field"
DEFVAL { disabled }
::= { alaQoSActionEntry 38 }
alaQoSActionCIR OBJECT-TYPE
SYNTAX Integer32
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Committed Information Rate - bandwidth values in kilobits per second."
DEFVAL { 0 }
::= { alaQoSActionEntry 39 }
alaQoSActionCIRStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether CIR value is specified(enabled)
or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 40 }
alaQoSActionCBS OBJECT-TYPE
SYNTAX Integer32(0 .. 2147450880)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Committed Burst Size - bucket size in byte."
DEFVAL { 0 }
::= { alaQoSActionEntry 41 }
alaQoSActionCBSStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether CBS value is specified(enabled)
or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 42 }
alaQoSActionPIR OBJECT-TYPE
SYNTAX Integer32
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Peak Information Rate - bandwidth values in kilobits per second."
DEFVAL { 0 }
::= { alaQoSActionEntry 43 }
alaQoSActionPIRStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether PIR value is specified(enabled)
or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 44 }
alaQoSActionPBS OBJECT-TYPE
SYNTAX Integer32(0 .. 2147450880)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Peak Burst Size - bucket size in byte."
DEFVAL { 0 }
::= { alaQoSActionEntry 45 }
alaQoSActionPBSStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether PBS value is specified(enabled)
or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 46 }
alaQoSActionCPUPriority OBJECT-TYPE
SYNTAX Integer32(0 .. 7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Priority for CPU messages."
DEFVAL { 0 }
::= { alaQoSActionEntry 47 }
alaQoSActionCPUPriorityStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether CPU Priority value is specified(enabled)
or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 48 }
alaQoSActionColorOnly OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "only color red traffic "
::= { alaQoSActionEntry 49 }
alaQoSActionRedirectChassis OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination physical chassis for redirected traffic"
DEFVAL { 1 }
::= { alaQoSActionEntry 50 }
alaQoSActionMirrorChassis OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Destination physical chassis for mirrored traffic"
DEFVAL { 1 }
::= { alaQoSActionEntry 51 }
alaQoSActionPermanentGatewayIpV6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Next hop gateway to use for IPv6 traffic"
DEFVAL { '00000000000000000000000000000000'h }
::= { alaQoSActionEntry 52 }
alaQoSActionPermanentGatewayIpV6AddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether permanent gateway IPv6 address
is specified(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSActionEntry 53 }
alaQoSActionPermanentGatewayIpV6IfIndex OBJECT-TYPE
SYNTAX Ipv6IfIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Ipv6IfIndex for link-local address, else 0."
DEFVAL { 0 }
::= { alaQoSActionEntry 54 }
alaQoSActionRTCPMonitor OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "RTCP Monitor status for the traffic."
DEFVAL { enable }
::= { alaQoSActionEntry 55 }
alaQoSActionRTCPMonitorStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of the RTCP Monitor field for the traffic."
DEFVAL { enabled }
::= { alaQoSActionEntry 56 }
alaQoSActionRTCPDSCP OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "RTCP DSCP number for the traffic."
::= { alaQoSActionEntry 57 }
alaQoSActionRTCPDSCPStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of the RTCP DSCP field for the traffic."
DEFVAL { enabled }
::= { alaQoSActionEntry 58 }
alaQoSActionTrustDSCP OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Trust DSCP status for the traffic."
DEFVAL { no }
::= { alaQoSActionEntry 59 }
alaQoSActionTrustDSCPStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of the Trust DSCP field for the traffic."
DEFVAL { enabled }
::= { alaQoSActionEntry 60 }
alaQoSActionRedirectModule OBJECT-TYPE
SYNTAX INTEGER {
none (0),
qmr (1),
captivePortal (2),
unauthorized (3),
byod (4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Object to configure action on HTTP port for Access-Guardian
Restricted Role configuration."
DEFVAL { none }
::= { alaQoSActionEntry 61 }
--
-- Definition of action table
--
alaQoSAppliedActionTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedAction definitions"
::= { alaQoSMIBObjects 28 }
alaQoSAppliedActionEntry OBJECT-TYPE
SYNTAX QoSAppliedActionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedAction"
INDEX {
alaQoSAppliedActionName
}
::= { alaQoSAppliedActionTable 1 }
QoSAppliedActionEntry ::=
SEQUENCE
{
alaQoSAppliedActionName SnmpAdminString,
alaQoSAppliedActionSource INTEGER,
alaQoSAppliedActionDisposition INTEGER,
alaQoSAppliedActionMaximumBandwidth Integer32,
alaQoSAppliedActionMaximumBandwidthStatus INTEGER,
alaQoSAppliedActionPriority Integer32,
alaQoSAppliedActionPriorityStatus INTEGER,
alaQoSAppliedActionShared INTEGER,
alaQoSAppliedActionMaximumDepth Integer32,
alaQoSAppliedActionMaximumDepthStatus INTEGER,
alaQoSAppliedAction8021p Integer32,
alaQoSAppliedAction8021pStatus INTEGER,
alaQoSAppliedActionTos Integer32,
alaQoSAppliedActionTosStatus INTEGER,
alaQoSAppliedActionDscp Integer32,
alaQoSAppliedActionDscpStatus INTEGER,
alaQoSAppliedActionMapFrom INTEGER,
alaQoSAppliedActionMapTo INTEGER,
alaQoSAppliedActionMapGroup SnmpAdminString,
alaQoSAppliedActionMapGroupStatus INTEGER,
alaQoSAppliedActionLoadBalanceGroup SnmpAdminString,
alaQoSAppliedActionLoadBalanceGroupStatus INTEGER,
alaQoSAppliedActionPermanentGatewayIpAddr IpAddress,
alaQoSAppliedActionPermanentGatewayIpAddrStatus INTEGER,
alaQoSAppliedActionAlternateGatewayIpAddr IpAddress,
alaQoSAppliedActionAlternateGatewayIpAddrStatus INTEGER,
alaQoSAppliedActionRowStatus RowStatus,
alaQoSAppliedActionNocache INTEGER,
alaQoSAppliedActionPortdisable INTEGER,
alaQoSAppliedActionRedirectSlot Integer32,
alaQoSAppliedActionRedirectSlotStatus INTEGER,
alaQoSAppliedActionRedirectPort Integer32,
alaQoSAppliedActionRedirectAgg Integer32,
alaQoSAppliedActionRedirectAggStatus INTEGER,
alaQoSAppliedActionMirrorSlot Integer32,
alaQoSAppliedActionMirrorPort Integer32,
alaQoSAppliedActionMirrorMode INTEGER,
alaQoSAppliedActionMirrorModeStatus INTEGER,
alaQoSAppliedActionCIR Integer32,
alaQoSAppliedActionCIRStatus INTEGER,
alaQoSAppliedActionCBS Integer32,
alaQoSAppliedActionCBSStatus INTEGER,
alaQoSAppliedActionPIR Integer32,
alaQoSAppliedActionPIRStatus INTEGER,
alaQoSAppliedActionPBS Integer32,
alaQoSAppliedActionPBSStatus INTEGER,
alaQoSAppliedActionCPUPriority Integer32,
alaQoSAppliedActionCPUPriorityStatus INTEGER,
alaQoSAppliedActionColorOnly INTEGER,
alaQoSAppliedActionRedirectChassis Integer32,
alaQoSAppliedActionMirrorChassis Integer32,
alaQoSAppliedActionPermanentGatewayIpV6Addr Ipv6Address,
alaQoSAppliedActionPermanentGatewayIpV6AddrStatus INTEGER,
alaQoSAppliedActionPermanentGatewayIpV6IfIndex Ipv6IfIndexOrZero,
alaQoSAppliedActionRTCPMonitor INTEGER,
alaQoSAppliedActionRTCPMonitorStatus INTEGER,
alaQoSAppliedActionRTCPDSCP Integer32,
alaQoSAppliedActionRTCPDSCPStatus INTEGER,
alaQoSAppliedActionTrustDSCP INTEGER,
alaQoSAppliedActionTrustDSCPStatus INTEGER
}
alaQoSAppliedActionName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of action"
::= { alaQoSAppliedActionEntry 1 }
alaQoSAppliedActionSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What entity created the action."
::= { alaQoSAppliedActionEntry 2 }
alaQoSAppliedActionDisposition OBJECT-TYPE
SYNTAX INTEGER {
accept (1),
drop (2),
deny (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Disposition of traffic using the action.
Use to filter out unwanted traffic."
::= { alaQoSAppliedActionEntry 3 }
alaQoSAppliedActionMaximumBandwidth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum bandwidth (Kbits/sec) allowed for traffic"
::= { alaQoSAppliedActionEntry 4 }
alaQoSAppliedActionMaximumBandwidthStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether maximum bandwidth
is specified(enabled) or not(disabled)."
::= { alaQoSAppliedActionEntry 5 }
alaQoSAppliedActionPriority OBJECT-TYPE
SYNTAX Integer32 (0..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Internal and queueing priority to use for traffic."
::= { alaQoSAppliedActionEntry 6 }
alaQoSAppliedActionPriorityStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether priority
is specified(enabled) or not(disabled)."
::= { alaQoSAppliedActionEntry 7 }
alaQoSAppliedActionShared OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When enabled, try and share any resources
(queues/limiters/descriptors) when more than one policy uses
the same action."
::= { alaQoSAppliedActionEntry 8 }
alaQoSAppliedActionMaximumDepth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Maximum depth (Kbytes) of queues for traffic.
Used for EBS in tri-color marker applications."
::= { alaQoSAppliedActionEntry 9 }
alaQoSAppliedActionMaximumDepthStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether maximum depth
is specified(enabled) or not(disabled)."
::= { alaQoSAppliedActionEntry 10 }
alaQoSAppliedAction8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "802.1p value to stamp on traffic."
::= { alaQoSAppliedActionEntry 11 }
alaQoSAppliedAction8021pStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether 802.1p
is specified(enabled) or not(disabled)."
::= { alaQoSAppliedActionEntry 12 }
alaQoSAppliedActionTos OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TOS value to stamp on traffic. (High 3 bits of TOS byte)"
::= { alaQoSAppliedActionEntry 13 }
alaQoSAppliedActionTosStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether TOS
is specified(enabled) or not(disabled)."
::= { alaQoSAppliedActionEntry 14 }
alaQoSAppliedActionDscp OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "TOS value to stamp on traffic. (High 6 bits of TOS byte)"
::= { alaQoSAppliedActionEntry 15 }
alaQoSAppliedActionDscpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether DSCP
is specified(enabled) or not(disabled)."
::= { alaQoSAppliedActionEntry 16 }
alaQoSAppliedActionMapFrom OBJECT-TYPE
SYNTAX INTEGER {
b8021p (1),
tos (2),
dscp (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What field to use as key for mapping 802.1p/TOS/DSCP priorities"
::= { alaQoSAppliedActionEntry 17 }
alaQoSAppliedActionMapTo OBJECT-TYPE
SYNTAX INTEGER {
b8021p (1),
tos (2),
dscp (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What field to rewrite due to remapping 802.1p/TOS/DSCP
priorities"
::= { alaQoSAppliedActionEntry 18 }
alaQoSAppliedActionMapGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of the map group to use when remapping 802.1p/TOS/DSCP
priorities."
::= { alaQoSAppliedActionEntry 19 }
alaQoSAppliedActionMapGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether a map group
is specified(enabled) or not(disabled)."
::= { alaQoSAppliedActionEntry 20 }
alaQoSAppliedActionLoadBalanceGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..23))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Name of load balance group to use for traffic"
::= { alaQoSAppliedActionEntry 21 }
alaQoSAppliedActionLoadBalanceGroupStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether load balanace group
is specified(enabled) or not(disabled)."
::= { alaQoSAppliedActionEntry 22 }
alaQoSAppliedActionPermanentGatewayIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Next hop gateway to use for traffic"
::= { alaQoSAppliedActionEntry 23 }
alaQoSAppliedActionPermanentGatewayIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether permanent gateway IP address
is specified(enabled) or not(disabled)."
::= { alaQoSAppliedActionEntry 24 }
alaQoSAppliedActionAlternateGatewayIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Next hop gateway to use for traffic that doesn't have an
explicit route. Use this gateway instead of default routes."
::= { alaQoSAppliedActionEntry 25 }
alaQoSAppliedActionAlternateGatewayIpAddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether alternate gateway IP address
is specified(enabled) or not(disabled)."
::= { alaQoSAppliedActionEntry 26 }
alaQoSAppliedActionRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete actions according to the
RowStatus convention"
::= { alaQoSAppliedActionEntry 27 }
alaQoSAppliedActionNocache OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When enabled, don't make hardware entries for matching flows."
::= { alaQoSAppliedActionEntry 28 }
alaQoSAppliedActionPortdisable OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When enabled, disable the physical source port of the traffic."
::= { alaQoSAppliedActionEntry 29 }
alaQoSAppliedActionRedirectSlot OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination physical slot for redirected traffic"
::= { alaQoSAppliedActionEntry 30 }
alaQoSAppliedActionRedirectSlotStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status for alaQoSAppliedActionRedirectSlotStatus field"
::= { alaQoSAppliedActionEntry 31 }
alaQoSAppliedActionRedirectPort OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination physical port for redirected traffic"
::= { alaQoSAppliedActionEntry 32 }
alaQoSAppliedActionRedirectAgg OBJECT-TYPE
SYNTAX Integer32 (0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination linkagg for redirected traffic"
::= { alaQoSAppliedActionEntry 33 }
alaQoSAppliedActionRedirectAggStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status for alaQoSAppliedActionRedirectAggStatus field"
::= { alaQoSAppliedActionEntry 34 }
alaQoSAppliedActionMirrorSlot OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination physical slot for mirrored traffic"
::= { alaQoSAppliedActionEntry 35 }
alaQoSAppliedActionMirrorPort OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination physical port for mirrored traffic"
::= { alaQoSAppliedActionEntry 36 }
alaQoSAppliedActionMirrorMode OBJECT-TYPE
SYNTAX INTEGER {
ingress(1),
egress(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Mirroring mode"
DEFVAL { ingress }
::= { alaQoSAppliedActionEntry 37 }
alaQoSAppliedActionMirrorModeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status for alaQoSAppliedActionMirrorMode field"
::= { alaQoSAppliedActionEntry 38 }
alaQoSAppliedActionCIR OBJECT-TYPE
SYNTAX Integer32
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Committed Information Rate - bandwidth values in kilobits per second."
DEFVAL { 0 }
::= { alaQoSAppliedActionEntry 39 }
alaQoSAppliedActionCIRStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether CIR value is specified(enabled)
or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedActionEntry 40 }
alaQoSAppliedActionCBS OBJECT-TYPE
SYNTAX Integer32(0 .. 2147450880)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Committed Burst Size - bucket size in byte."
DEFVAL { 0 }
::= { alaQoSAppliedActionEntry 41 }
alaQoSAppliedActionCBSStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether CBS value is specified(enabled)
or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedActionEntry 42 }
alaQoSAppliedActionPIR OBJECT-TYPE
SYNTAX Integer32
UNITS "kilobits per second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Peak Information Rate - bandwidth values in kilobits per second."
DEFVAL { 0 }
::= { alaQoSAppliedActionEntry 43 }
alaQoSAppliedActionPIRStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether PIR value is specified(enabled)
or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedActionEntry 44 }
alaQoSAppliedActionPBS OBJECT-TYPE
SYNTAX Integer32(0 .. 2147450880)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Peak Burst Size - bucket size in byte."
DEFVAL { 0 }
::= { alaQoSAppliedActionEntry 45 }
alaQoSAppliedActionPBSStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether PBS value is specified(enabled)
or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedActionEntry 46 }
alaQoSAppliedActionCPUPriority OBJECT-TYPE
SYNTAX Integer32(0 .. 7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Priority for CPU messages."
DEFVAL { 0 }
::= { alaQoSAppliedActionEntry 47 }
alaQoSAppliedActionCPUPriorityStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether CPU Priority value is specified(enabled)
or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedActionEntry 48 }
alaQoSAppliedActionColorOnly OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "only color red traffic "
::= { alaQoSAppliedActionEntry 49 }
alaQoSAppliedActionRedirectChassis OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination physical chassis for redirected traffic"
::= { alaQoSAppliedActionEntry 50 }
alaQoSAppliedActionMirrorChassis OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination physical chassis for mirrored traffic"
::= { alaQoSAppliedActionEntry 51 }
alaQoSAppliedActionPermanentGatewayIpV6Addr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Next hop gateway to use for IPv6 traffic"
DEFVAL { '00000000000000000000000000000000'h }
::= { alaQoSAppliedActionEntry 52 }
alaQoSAppliedActionPermanentGatewayIpV6AddrStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether permanent gateway IPv6 address
is specified(enabled) or not(disabled)."
DEFVAL { disabled }
::= { alaQoSAppliedActionEntry 53 }
alaQoSAppliedActionPermanentGatewayIpV6IfIndex OBJECT-TYPE
SYNTAX Ipv6IfIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Ipv6IfIndex for link-local address, else 0."
DEFVAL { 0 }
::= { alaQoSAppliedActionEntry 54 }
alaQoSAppliedActionRTCPMonitor OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "RTCP Monitor status for the traffic."
DEFVAL { enable }
::= { alaQoSAppliedActionEntry 55 }
alaQoSAppliedActionRTCPMonitorStatus OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of the RTCP Monitor field for the traffic."
DEFVAL { enable }
::= { alaQoSAppliedActionEntry 56 }
alaQoSAppliedActionRTCPDSCP OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "RTCP DSCP number for the traffic."
::= { alaQoSAppliedActionEntry 57 }
alaQoSAppliedActionRTCPDSCPStatus OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of the RTCP DSCP field for the traffic."
::= { alaQoSAppliedActionEntry 58 }
alaQoSAppliedActionTrustDSCP OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Trust DSCP status for the traffic."
DEFVAL { no }
::= { alaQoSAppliedActionEntry 59 }
alaQoSAppliedActionTrustDSCPStatus OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of the Trust DSCP field for the traffic."
DEFVAL { enable }
::= { alaQoSAppliedActionEntry 60 }
--
-- Definition of port table
--
alaQoSPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS Port definitions"
::= { alaQoSMIBObjects 29 }
alaQoSPortEntry OBJECT-TYPE
SYNTAX QoSPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS Port"
INDEX {
alaQoSPortSlot,
alaQoSPortPort
}
::= { alaQoSPortTable 1 }
QoSPortEntry ::=
SEQUENCE
{
alaQoSPortSlot Integer32,
alaQoSPortPort Integer32,
alaQoSPortInterfaceType INTEGER,
alaQoSPortTrusted INTEGER,
alaQoSPortDefault8021p Integer32,
alaQoSPortDefaultDSCP Integer32,
alaQoSPortMaximumDefaultDepth Integer32,
alaQoSPortMaximumDefaultDepthStatus INTEGER,
alaQoSPortReset INTEGER,
alaQoSPortPhysicalBandwidth Integer32,
alaQoSPortRowStatus RowStatus,
alaQoSPortDefaultClassification INTEGER,
alaQoSPortMaximumBandwidth Integer32,
alaQoSPortMaximumBandwidthStatus INTEGER,
alaQoSPortMaximumIngBandwidth Integer32,
alaQoSPortMaximumIngBandwidthStatus INTEGER,
alaQoSPortMaximumIngressDepth Integer32,
alaQoSPortMaximumIngressDepthStatus INTEGER,
alaQoSPortDEIMarking INTEGER,
alaQoSPortDEIMapping INTEGER
}
alaQoSPortSlot OBJECT-TYPE
SYNTAX Integer32 (0..6016)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Physical slot port resides on
If this is a virtual chassis environemnt,
This will contain the ChassisId*1000 + slotNum."
::= { alaQoSPortEntry 1 }
alaQoSPortPort OBJECT-TYPE
SYNTAX Integer32 (0..52)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Physical port number"
::= { alaQoSPortEntry 2 }
alaQoSPortInterfaceType OBJECT-TYPE
SYNTAX INTEGER {
ethernet (1),
wan (2),
ethernet10 (3),
ethernet100 (4),
ethernet1G (5),
ethernet10G (6),
aggregate (7),
ethernet40G (8),
ethernet100G (9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The type of interface QoS matches for this physical port"
::= { alaQoSPortEntry 3 }
alaQoSPortTrusted OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status of trusting 802.1p/TOS/DSCP values.
When trusted, 802.1p/DSCP values in the packet are passed
through the switch. When untrusted, 802.1p/DSCP values are set
to the port defaults."
DEFVAL { no }
::= { alaQoSPortEntry 4 }
alaQoSPortDefault8021p OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "802.1p priority value to use for untagged frames arriving on
the port and tagged frames when the port is untrusted."
DEFVAL { 0 }
::= { alaQoSPortEntry 5 }
alaQoSPortDefaultDSCP OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DSCP value to stamp in frames arriving on the port when the port
is untrusted"
DEFVAL { 0 }
::= { alaQoSPortEntry 6 }
alaQoSPortMaximumDefaultDepth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Maximum depth of egress queues (Kbytes).
Maximum depth of queues on this port"
DEFVAL { 0 }
::= { alaQoSPortEntry 7 }
alaQoSPortMaximumDefaultDepthStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether to enforce
maximum depth on this port"
DEFVAL { disabled }
::= { alaQoSPortEntry 8 }
alaQoSPortReset OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Reset all QoS parameters to default values"
DEFVAL { no }
::= { alaQoSPortEntry 9 }
alaQoSPortPhysicalBandwidth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Physical bandwidth of port (Kbit/sec)"
::= { alaQoSPortEntry 10 }
alaQoSPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete ports according to the
RowStatus convention"
::= { alaQoSPortEntry 11 }
alaQoSPortDefaultClassification OBJECT-TYPE
SYNTAX INTEGER {
b8021p (1),
tos (2),
dscp (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Ingress traffic classification parameter for Firenze port
What field to interpret as priority for WRED"
DEFVAL { tos }
::= { alaQoSPortEntry 12 }
alaQoSPortMaximumBandwidth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Maximum egress bandwidth (Kbits/sec).
Maximum rate to send traffic out this port"
DEFVAL { 0 }
::= { alaQoSPortEntry 13 }
alaQoSPortMaximumBandwidthStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether to enforce
maximum bandwidth on port."
DEFVAL { disabled }
::= { alaQoSPortEntry 14 }
alaQoSPortMaximumIngBandwidth OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Maximum igress bandwidth (Kbits/sec).
Maximum rate to recieve traffic in on this port"
DEFVAL { 0 }
::= { alaQoSPortEntry 15 }
alaQoSPortMaximumIngBandwidthStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether to enforce
maximum bandwidth on port."
DEFVAL { disabled }
::= { alaQoSPortEntry 16 }
alaQoSPortMaximumIngressDepth OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum depth of ingress queues (Kbytes).
Maximum depth of queues on this port"
DEFVAL { 0 }
::= { alaQoSPortEntry 17 }
alaQoSPortMaximumIngressDepthStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status field indicating whether to enforce
maximum depth on this port"
DEFVAL { disabled }
::= { alaQoSPortEntry 18 }
alaQoSPortDEIMarking OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies if, in egress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to
SLA (Yellow color packets).
enabled(1) -- the DEI/CFI bit will be set in egress traffic.
disabled(2) -- the DEI/CFI bit will not be set in egress traffic."
DEFVAL { disabled }
::= { alaQoSPortEntry 19 }
alaQoSPortDEIMapping OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies if, in ingress traffic, the DEI/CFI bit
will be set or not for the traffic which is not conformant to
SLA (Yellow color packets).
enabled(1) -- the DEI/CFI bit will be set in ingress traffic.
disabled(2) -- the DEI/CFI bit will not be set in ingress traffic."
DEFVAL { disabled }
::= { alaQoSPortEntry 20 }
--
-- Definition of config table
--
alaQoSConfig OBJECT IDENTIFIER ::= { alaQoSMIBObjects 30 }
alaQoSConfigEnabled OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Is QoS enabled on the switch"
::= { alaQoSConfig 1 }
alaQoSConfigTrustPorts OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag to indicate whether to trust the 802.1p/TOS values on
incoming traffic by default. Can be overridden on a port by
port basis."
::= { alaQoSConfig 2 }
alaQoSConfigStatsInterval OBJECT-TYPE
SYNTAX Integer32 (10..3600)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Interval in seconds for how often statistics are updated"
::= { alaQoSConfig 3 }
alaQoSConfigLogLines OBJECT-TYPE
SYNTAX Integer32 (0..10240)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Number of log lines to maintain in the QoS log"
::= { alaQoSConfig 4 }
alaQoSConfigLogLevel OBJECT-TYPE
SYNTAX Integer32 (2..9)
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The level of logging desired. The higher the level, the more
verbose the logging"
::= { alaQoSConfig 5 }
alaQoSConfigLogConsole OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether QoS log events are logged to the console"
::= { alaQoSConfig 6 }
alaQoSConfigForwardLog OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Whether QoS forwards logging events to PolicyManager"
::= { alaQoSConfig 7 }
alaQoSConfigClearLog OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clear the QoS log"
::= { alaQoSConfig 8 }
alaQoSConfigApply OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set to apply all pending QoS configuration/policy changes"
::= { alaQoSConfig 9 }
alaQoSConfigRevert OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set to revert all pending QoS configuration/policy changes"
::= { alaQoSConfig 10 }
alaQoSConfigReset OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set to reset global QoS configuration parameters to their
default values"
::= { alaQoSConfig 11 }
alaQoSConfigStatsReset OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Set to reset global QoS statistics counters"
::= { alaQoSConfig 12 }
alaQoSConfigFlush OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flush all pending policy objects"
::= { alaQoSConfig 13 }
alaQoSConfigDebug OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Possible debug flags for QoS"
::= { alaQoSConfig 14 }
alaQoSConfigUserportFilter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Events/protocols to filter on a Userport. Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim = 128
dvmrp = 256
is-is = 512
dnsreply = 1024"
::= { alaQoSConfig 15 }
alaQoSConfigAppliedUserportFilter OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Events/protocols to filter on a Userport. Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim = 128
dvmrp = 256
is-is = 512
dnsreply = 1024"
::= { alaQoSConfig 16 }
alaQoSConfigUserportShutdown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Events/protocols that trigger admin down of a Userport.
Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim = 128
dvmrp = 256
is-is = 512
dnsreply = 1024"
::= { alaQoSConfig 17 }
alaQoSConfigAppliedUserportShutdown OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Events/protocols that trigger admin down of a Userport.
Event bits values are:
spoof = 1
bpdu = 2
bgp = 4
ospf = 8
rip = 16
vrrp = 32
dhcp-server = 64
pim = 128
dvmrp = 256
is-is = 512
dnsreply = 1024"
::= { alaQoSConfig 18 }
alaQoSConfigAutoPhones OBJECT-TYPE
SYNTAX INTEGER {
pri0 (0),
pri1 (1),
pri2 (2),
pri3 (3),
pri4 (4),
pri5 (5),
pri6 (6),
pri7 (7),
trusted (8),
disable (9)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Auto configure CSBU Phones
pri0-7 - will replace the priority.
trusted - will allow priority from the orginator to be used.
disable - will unconfigure to feature."
::= { alaQoSConfig 19 }
alaQoSConfigQMPage OBJECT-TYPE
SYNTAX INTEGER {
yes (1),
no (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Flag to indicate whether to send back a quarantined page when a client is quarantined but a remediation URL is not specified."
::= { alaQoSConfig 20 }
alaQoSConfigQMMACGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Group name for quarantine manager quarantined MACs."
::= { alaQoSConfig 21 }
alaQoSConfigQMPath OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Default path for remediation server redirect."
::= { alaQoSConfig 22 }
alaQoSConfigDEIMapping OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies, in ingress traffic, the DEI/CFI bit is mapped
or not to internal drop precedence or yellow color.
enabled(1) -- the DEI/CFI bit is mapped to internal drop precedence or yellow
color if that bit is set.
disabled(2) -- the DEI/CFI bit is not mapped to drop precedence or yellow
color."
DEFVAL { disabled }
::= { alaQoSConfig 23 }
alaQoSConfigDEIMarking OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "This object specifies, in egress traffic, the DEI/CFI bit is mapped
or not to internal drop precedence or yellow color.
enabled(1) -- the DEI/CFI bit is mapped to internal drop precedence or yellow
color if that bit is set.
disabled(2) -- the DEI/CFI bit is not mapped to drop precedence or yellow
color."
DEFVAL { disabled }
::= { alaQoSConfig 24 }
alaQoSConfigSwitchGroup OBJECT-TYPE
SYNTAX INTEGER {
expanded (1),
compact (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "How to match the network group `Switch'.
expanded -- Match each interface address as a unique identifier.
compact -- Match Switch interfaces using an aggregated identifier."
DEFVAL { expanded }
::= { alaQoSConfig 25 }
alaQoSVmSnooping OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disabled (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Is VM Snooping enabled on the switch"
DEFVAL { disabled }
::= { alaQoSConfig 26 }
--
-- Definition of statistics table
--
alaQoSStats OBJECT IDENTIFIER ::= { alaQoSMIBObjects 31 }
alaQoSStatsSpoofedEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total Number of spoofed events"
::= { alaQoSStats 1 }
alaQoSStatsNonSpoofedEvents OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Total number of non-spoofed events"
::= { alaQoSStats 2 }
--
-- Definition of validity period table
--
alaQoSValidityPeriodTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSValidityPeriodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS ValidityPeriod definitions"
::= { alaQoSMIBObjects 32 }
alaQoSValidityPeriodEntry OBJECT-TYPE
SYNTAX QoSValidityPeriodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS ValidityPeriod"
INDEX {
alaQoSValidityPeriodName
}
::= { alaQoSValidityPeriodTable 1 }
QoSValidityPeriodEntry ::=
SEQUENCE
{
alaQoSValidityPeriodName SnmpAdminString,
alaQoSValidityPeriodSource INTEGER,
alaQoSValidityPeriodDays Integer32,
alaQoSValidityPeriodDaysStatus INTEGER,
alaQoSValidityPeriodMonths Integer32,
alaQoSValidityPeriodMonthsStatus INTEGER,
alaQoSValidityPeriodHour SnmpAdminString,
alaQoSValidityPeriodHourStatus INTEGER,
alaQoSValidityPeriodEndHour SnmpAdminString,
alaQoSValidityPeriodInterval SnmpAdminString,
alaQoSValidityPeriodIntervalStatus INTEGER,
alaQoSValidityPeriodEndInterval SnmpAdminString,
alaQoSValidityPeriodRowStatus RowStatus
}
alaQoSValidityPeriodName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of validity period"
::= { alaQoSValidityPeriodEntry 1 }
alaQoSValidityPeriodSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What entity created the validity period."
DEFVAL { cli }
::= { alaQoSValidityPeriodEntry 2 }
alaQoSValidityPeriodDays OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Bitfield for each day of the week this validity period
is active. Monday is least significant, Sunday
is most significant."
::= { alaQoSValidityPeriodEntry 3 }
alaQoSValidityPeriodDaysStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the validity period
has specific active days of the month."
DEFVAL { disabled }
::= { alaQoSValidityPeriodEntry 4 }
alaQoSValidityPeriodMonths OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Bitfield for each month this validity period
is active. January is least significant. Decemeber
is most significant."
::= { alaQoSValidityPeriodEntry 5 }
alaQoSValidityPeriodMonthsStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the validity period
has specific active days of the week."
DEFVAL { disabled }
::= { alaQoSValidityPeriodEntry 6 }
alaQoSValidityPeriodHour OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..7))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Time of day this period becomes active.
Format is 'hh:mm'"
::= { alaQoSValidityPeriodEntry 7 }
alaQoSValidityPeriodHourStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the validity period
has specific active hours of the day."
DEFVAL { disabled }
::= { alaQoSValidityPeriodEntry 8 }
alaQoSValidityPeriodEndHour OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..7))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Time of day this period becomes inactive.
Format is 'hh:mm'"
::= { alaQoSValidityPeriodEntry 9 }
alaQoSValidityPeriodInterval OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..19))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Date/time when the validity period begins.
Format is 'mm/dd/yyyy hh:mm'"
::= { alaQoSValidityPeriodEntry 10 }
alaQoSValidityPeriodIntervalStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Status field indicating whether the validity period
has a specific active date-time interval."
DEFVAL { disabled }
::= { alaQoSValidityPeriodEntry 11 }
alaQoSValidityPeriodEndInterval OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..19))
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Date/time when the validity period ends.
Format is 'mm/dd/yyyy hh:mm'"
::= { alaQoSValidityPeriodEntry 12 }
alaQoSValidityPeriodRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete validity periods according
to the RowStatus convention"
::= { alaQoSValidityPeriodEntry 13 }
--
-- Definition of validity period table
--
alaQoSAppliedValidityPeriodTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedValidityPeriodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedValidityPeriod definitions"
::= { alaQoSMIBObjects 33 }
alaQoSAppliedValidityPeriodEntry OBJECT-TYPE
SYNTAX QoSAppliedValidityPeriodEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedValidityPeriod"
INDEX {
alaQoSAppliedValidityPeriodName
}
::= { alaQoSAppliedValidityPeriodTable 1 }
QoSAppliedValidityPeriodEntry ::=
SEQUENCE
{
alaQoSAppliedValidityPeriodName SnmpAdminString,
alaQoSAppliedValidityPeriodSource INTEGER,
alaQoSAppliedValidityPeriodDays Integer32,
alaQoSAppliedValidityPeriodDaysStatus INTEGER,
alaQoSAppliedValidityPeriodMonths Integer32,
alaQoSAppliedValidityPeriodMonthsStatus INTEGER,
alaQoSAppliedValidityPeriodHour SnmpAdminString,
alaQoSAppliedValidityPeriodHourStatus INTEGER,
alaQoSAppliedValidityPeriodEndHour SnmpAdminString,
alaQoSAppliedValidityPeriodInterval SnmpAdminString,
alaQoSAppliedValidityPeriodIntervalStatus INTEGER,
alaQoSAppliedValidityPeriodEndInterval SnmpAdminString,
alaQoSAppliedValidityPeriodRowStatus RowStatus
}
alaQoSAppliedValidityPeriodName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of validity period"
::= { alaQoSAppliedValidityPeriodEntry 1 }
alaQoSAppliedValidityPeriodSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What entity created the validity period."
::= { alaQoSAppliedValidityPeriodEntry 2 }
alaQoSAppliedValidityPeriodDays OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bitfield for each day of the week this validity period
is active. Monday is least significant, Sunday
is most significant."
::= { alaQoSAppliedValidityPeriodEntry 3 }
alaQoSAppliedValidityPeriodDaysStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the validity period
has specific active days of the month."
::= { alaQoSAppliedValidityPeriodEntry 4 }
alaQoSAppliedValidityPeriodMonths OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Bitfield for each month this validity period
is active. January is least significant. Decemeber
is most significant."
::= { alaQoSAppliedValidityPeriodEntry 5 }
alaQoSAppliedValidityPeriodMonthsStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the validity period
has specific active days of the week."
::= { alaQoSAppliedValidityPeriodEntry 6 }
alaQoSAppliedValidityPeriodHour OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time of day this period becomes active.
Format is 'hh:mm'"
::= { alaQoSAppliedValidityPeriodEntry 7 }
alaQoSAppliedValidityPeriodHourStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the validity period
has specific active hours of the day."
::= { alaQoSAppliedValidityPeriodEntry 8 }
alaQoSAppliedValidityPeriodEndHour OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..7))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Time of day this period becomes inactive.
Format is 'hh:mm'"
::= { alaQoSAppliedValidityPeriodEntry 9 }
alaQoSAppliedValidityPeriodInterval OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..19))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Date/time when the validity period begins.
Format is 'mm/dd/yyyy hh:mm'"
::= { alaQoSAppliedValidityPeriodEntry 10 }
alaQoSAppliedValidityPeriodIntervalStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Status field indicating whether the validity period
has a specific active date-time interval."
::= { alaQoSAppliedValidityPeriodEntry 11 }
alaQoSAppliedValidityPeriodEndInterval OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..19))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Date/time when the validity period ends.
Format is 'mm/dd/yyyy hh:mm'"
::= { alaQoSAppliedValidityPeriodEntry 12 }
alaQoSAppliedValidityPeriodRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete validity periods according
to the RowStatus convention"
::= { alaQoSAppliedValidityPeriodEntry 13 }
--
-- Definition of Rule group table
--
alaQoSRuleGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSRuleGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS RuleGroups definitions"
::= { alaQoSMIBObjects 34 }
alaQoSRuleGroupsEntry OBJECT-TYPE
SYNTAX QoSRuleGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS RuleGroups"
INDEX {
alaQoSRuleGroupsName
}
::= { alaQoSRuleGroupsTable 1 }
QoSRuleGroupsEntry ::=
SEQUENCE
{
alaQoSRuleGroupsName SnmpAdminString,
alaQoSRuleGroupsSource INTEGER,
alaQoSRuleGroupsType INTEGER,
alaQoSRuleGroupsEnabled INTEGER,
alaQoSRuleGroupsStatus RowStatus
}
alaQoSRuleGroupsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of rule group"
::= { alaQoSRuleGroupsEntry 1 }
alaQoSRuleGroupsSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What entity created the rule group."
DEFVAL { cli }
::= { alaQoSRuleGroupsEntry 2 }
alaQoSRuleGroupsType OBJECT-TYPE
SYNTAX INTEGER {
default (1),
egress (2),
unp (3),
appfp (4),
empacl (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Type of rule group."
DEFVAL { unp }
::= { alaQoSRuleGroupsEntry 3 }
alaQoSRuleGroupsEnabled OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Is this rule grop enabled or not"
DEFVAL { enable }
::= { alaQoSRuleGroupsEntry 4 }
alaQoSRuleGroupsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete rule groups according to the
RowStatus convention"
::= { alaQoSRuleGroupsEntry 5 }
--
-- Definition of rule group table
--
alaQoSAppliedRuleGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedRuleGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedRuleGroups definitions"
::= { alaQoSMIBObjects 35 }
alaQoSAppliedRuleGroupsEntry OBJECT-TYPE
SYNTAX QoSAppliedRuleGroupsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedRuleGroups"
INDEX {
alaQoSAppliedRuleGroupsName
}
::= { alaQoSAppliedRuleGroupsTable 1 }
QoSAppliedRuleGroupsEntry ::=
SEQUENCE
{
alaQoSAppliedRuleGroupsName SnmpAdminString,
alaQoSAppliedRuleGroupsSource INTEGER,
alaQoSAppliedRuleGroupsType INTEGER,
alaQoSAppliedRuleGroupsEnabled INTEGER,
alaQoSAppliedRuleGroupsStatus RowStatus
}
alaQoSAppliedRuleGroupsName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of rule group"
::= { alaQoSAppliedRuleGroupsEntry 1 }
alaQoSAppliedRuleGroupsSource OBJECT-TYPE
SYNTAX INTEGER {
ldap (1),
cli (2),
blt (3),
api (4),
imp (5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "What entity created the service group."
DEFVAL { cli }
::= { alaQoSAppliedRuleGroupsEntry 2 }
alaQoSAppliedRuleGroupsType OBJECT-TYPE
SYNTAX INTEGER {
default (1),
egress (2),
unp (3),
appfp (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "What entity created the rule group."
::= { alaQoSAppliedRuleGroupsEntry 3 }
alaQoSAppliedRuleGroupsEnabled OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Is this rule grop enabled or not"
::= { alaQoSAppliedRuleGroupsEntry 4 }
alaQoSAppliedRuleGroupsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete rule groups according to the
RowStatus convention"
::= { alaQoSAppliedRuleGroupsEntry 5 }
--
-- Definition of rule group entry table
--
alaQoSRuleGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSRuleGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS RuleGroup definitions"
::= { alaQoSMIBObjects 36 }
alaQoSRuleGroupEntry OBJECT-TYPE
SYNTAX QoSRuleGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS RuleGroup"
INDEX {
alaQoSRuleGroupsName,
alaQoSRuleGroupRuleName
}
::= { alaQoSRuleGroupTable 1 }
QoSRuleGroupEntry ::=
SEQUENCE
{
alaQoSRuleGroupRuleName SnmpAdminString,
alaQoSRuleGroupMatches Counter32,
alaQoSRuleGroupCountType INTEGER,
alaQoSRuleGroupPacketCount Counter64,
alaQoSRuleGroupByteCount Counter64,
alaQoSRuleGroupStatus RowStatus
}
alaQoSRuleGroupRuleName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of rule in rule group entry"
::= { alaQoSRuleGroupEntry 1 }
alaQoSRuleGroupMatches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of times this rule has been matched."
::= { alaQoSRuleGroupEntry 2 }
alaQoSRuleGroupCountType OBJECT-TYPE
SYNTAX INTEGER {
packets (1),
bytes (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Which rule statistics counters to update if not all are available"
DEFVAL { packets }
::= { alaQoSRuleGroupEntry 3 }
alaQoSRuleGroupPacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for packets patching this rule"
::= { alaQoSRuleGroupEntry 4 }
alaQoSRuleGroupByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for bytes matching this rule"
::= { alaQoSRuleGroupEntry 5 }
alaQoSRuleGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete rule group entries according to the
RowStatus convention"
::= { alaQoSRuleGroupEntry 6 }
--
-- Definition of rule group entry table
--
alaQoSAppliedRuleGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedRuleGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedRuleGroup definitions"
::= { alaQoSMIBObjects 37 }
alaQoSAppliedRuleGroupEntry OBJECT-TYPE
SYNTAX QoSAppliedRuleGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedRuleGroup"
INDEX {
alaQoSAppliedRuleGroupsName,
alaQoSAppliedRuleGroupRuleName
}
::= { alaQoSAppliedRuleGroupTable 1 }
QoSAppliedRuleGroupEntry ::=
SEQUENCE
{
alaQoSAppliedRuleGroupRuleName SnmpAdminString,
alaQoSAppliedRuleGroupMatches Counter32,
alaQoSAppliedRuleGroupCountType INTEGER,
alaQoSAppliedRuleGroupPacketCount Counter64,
alaQoSAppliedRuleGroupByteCount Counter64,
alaQoSAppliedRuleGroupStatus RowStatus
}
alaQoSAppliedRuleGroupRuleName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Name of rule in rule group entry"
::= { alaQoSAppliedRuleGroupEntry 1 }
alaQoSAppliedRuleGroupMatches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of times this rule has been matched."
::= { alaQoSAppliedRuleGroupEntry 2 }
alaQoSAppliedRuleGroupCountType OBJECT-TYPE
SYNTAX INTEGER {
packets (1),
bytes (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Which rule statistics counters to update if not all are available"
DEFVAL { packets }
::= { alaQoSAppliedRuleGroupEntry 3 }
alaQoSAppliedRuleGroupPacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for packets patching this rule"
::= { alaQoSAppliedRuleGroupEntry 4 }
alaQoSAppliedRuleGroupByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for bytes matching this rule"
::= { alaQoSAppliedRuleGroupEntry 5 }
alaQoSAppliedRuleGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete rule group entries according to the
RowStatus convention"
::= { alaQoSAppliedRuleGroupEntry 6 }
--
-- Definition of DSCP table
--
alaQoSDSCPTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaQoSDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS Condition definitions"
::= { alaQoSMIBObjects 55 }
alaQoSDSCPEntry OBJECT-TYPE
SYNTAX AlaQoSDSCPEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS DSCP"
INDEX {
alaQoSDSCPEntryNumber
}
::= { alaQoSDSCPTable 1 }
AlaQoSDSCPEntry ::=
SEQUENCE
{
alaQoSDSCPEntryNumber Integer32,
alaQoSDSCPPriority Integer32,
alaQoSDSCPDropPrecedence INTEGER,
alaQoSDSCPRowStatus RowStatus
}
alaQoSDSCPEntryNumber OBJECT-TYPE
SYNTAX Integer32(1..5000)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "DSCP Entry number for the traffic."
::= { alaQoSDSCPEntry 1}
alaQoSDSCPPriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DSCP priority for the traffic."
::= { alaQoSDSCPEntry 2}
alaQoSDSCPDropPrecedence OBJECT-TYPE
SYNTAX INTEGER {
low (1),
medium (2),
high (3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION "DSCP drop precedence for the traffic."
DEFVAL {low}
::= { alaQoSDSCPEntry 3}
alaQoSDSCPRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "RowStatus entry for QoS DSCP."
::= { alaQoSDSCPEntry 4}
--
-- Definition of Mac-Range table
--
alaQoSAutoMacRangeTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaQoSAutoMacRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS Auto Mac ranges"
::= { alaQoSMIBObjects 56 }
alaQoSAutoMacRangeEntry OBJECT-TYPE
SYNTAX AlaQoSAutoMacRangeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS Auto Mac Range"
INDEX {
alaQoSAutoMacRangeIndex
}
::= { alaQoSAutoMacRangeTable 1 }
AlaQoSAutoMacRangeEntry ::=
SEQUENCE
{
alaQoSAutoMacRangeIndex Unsigned32,
alaQoSAutoMacRangeStart MacAddress,
alaQoSAutoMacRangeEnd MacAddress
}
alaQoSAutoMacRangeIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Index to the Mac range table."
::= { alaQoSAutoMacRangeEntry 1 }
alaQoSAutoMacRangeStart OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "specifies the starting mac-address of the default mac-range
which is supported by qos auto phones."
::= { alaQoSAutoMacRangeEntry 2 }
alaQoSAutoMacRangeEnd OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION "specifies the end mac-address of the default mac-range
which is supported by qos auto phones."
::= { alaQoSAutoMacRangeEntry 3 }
--
-- Definition of extended rule table
--
alaQoSExtendedRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSExtendedRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS Rule definitions for extending port group behavior on individual port basis or group basis"
::= { alaQoSMIBObjects 57 }
alaQoSExtendedRuleEntry OBJECT-TYPE
SYNTAX QoSExtendedRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS Rule"
INDEX {
alaQoSRuleName,
alaQoSExtendedRuleSplitRuleID
}
::= { alaQoSExtendedRuleTable 1 }
QoSExtendedRuleEntry ::=
SEQUENCE
{
alaQoSExtendedRuleSplitRuleID Unsigned32,
alaQoSExtendedRuleChassis Integer32,
alaQoSExtendedRuleSlot Integer32,
alaQoSExtendedRulePort Integer32,
alaQoSExtendedRulePacketCount Counter64,
alaQoSExtendedRuleByteCount Counter64,
alaQoSExtendedRuleGreenPacketCount Counter64,
alaQoSExtendedRuleYellowPacketCount Counter64,
alaQoSExtendedRuleRedPacketCount Counter64,
alaQoSExtendedRuleGreenByteCount Counter64,
alaQoSExtendedRuleYellowByteCount Counter64,
alaQoSExtendedRuleRedByteCount Counter64
}
alaQoSExtendedRuleSplitRuleID OBJECT-TYPE
SYNTAX Unsigned32 (1..8192)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Split Rule ID defined from the number of members in the group."
::= { alaQoSExtendedRuleEntry 1 }
alaQoSExtendedRuleChassis OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Chassis on which rate-limit is enabled."
::= { alaQoSExtendedRuleEntry 2 }
alaQoSExtendedRuleSlot OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Slot on which rate-limit is enabled."
::= { alaQoSExtendedRuleEntry 3 }
alaQoSExtendedRulePort OBJECT-TYPE
SYNTAX Integer32 (1..52)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Port on which rate-limit is enabled."
::= { alaQoSExtendedRuleEntry 4 }
alaQoSExtendedRulePacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for packets matching this rule"
::= { alaQoSExtendedRuleEntry 5 }
alaQoSExtendedRuleByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for bytes matching this rule"
::= { alaQoSExtendedRuleEntry 6 }
alaQoSExtendedRuleGreenPacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets which are green compliant."
::= { alaQoSExtendedRuleEntry 7 }
alaQoSExtendedRuleYellowPacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets which are yellow compliant."
::= { alaQoSExtendedRuleEntry 8 }
alaQoSExtendedRuleRedPacketCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of packets which are red compliant."
::= { alaQoSExtendedRuleEntry 9 }
alaQoSExtendedRuleGreenByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of Bytes which are green compliant."
::= { alaQoSExtendedRuleEntry 10 }
alaQoSExtendedRuleYellowByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of Bytes which are yellow compliant."
::= { alaQoSExtendedRuleEntry 11 }
alaQoSExtendedRuleRedByteCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Counter for the number of Bytes which are red compliant."
::= { alaQoSExtendedRuleEntry 12 }
--
-- Definition of network group entry table
--
alaQoSV6NetworkGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSV6NetworkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS V6NetworkGroup definitions"
::= { alaQoSMIBObjects 40 }
alaQoSV6NetworkGroupEntry OBJECT-TYPE
SYNTAX QoSV6NetworkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS NetworkGroup"
INDEX {
alaQoSNetworkGroupsName,
alaQoSV6NetworkGroupIpAddr,
alaQoSV6NetworkGroupIpMask
}
::= { alaQoSV6NetworkGroupTable 1 }
QoSV6NetworkGroupEntry ::=
SEQUENCE
{
alaQoSV6NetworkGroupIpAddr Ipv6Address,
alaQoSV6NetworkGroupIpMask Ipv6Address,
alaQoSV6NetworkGroupStatus RowStatus
}
alaQoSV6NetworkGroupIpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP address for network group entry."
::= { alaQoSV6NetworkGroupEntry 1 }
alaQoSV6NetworkGroupIpMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP mask for network group entry."
::= { alaQoSV6NetworkGroupEntry 2 }
alaQoSV6NetworkGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION "Used to create/delete network group entries according to the
RowStatus convention"
::= { alaQoSV6NetworkGroupEntry 3 }
--
-- Definition of network group entry table
--
alaQoSAppliedV6NetworkGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF QoSAppliedV6NetworkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS AppliedNetworkGroup definitions"
::= { alaQoSMIBObjects 41 }
alaQoSAppliedV6NetworkGroupEntry OBJECT-TYPE
SYNTAX QoSAppliedV6NetworkGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS AppliedNetworkGroup"
INDEX {
alaQoSAppliedNetworkGroupsName,
alaQoSAppliedV6NetworkGroupIpAddr,
alaQoSAppliedV6NetworkGroupIpMask
}
::= { alaQoSAppliedV6NetworkGroupTable 1 }
QoSAppliedV6NetworkGroupEntry ::=
SEQUENCE
{
alaQoSAppliedV6NetworkGroupIpAddr Ipv6Address,
alaQoSAppliedV6NetworkGroupIpMask Ipv6Address,
alaQoSAppliedV6NetworkGroupStatus RowStatus
}
alaQoSAppliedV6NetworkGroupIpAddr OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP address for network group entry."
::= { alaQoSAppliedV6NetworkGroupEntry 1 }
alaQoSAppliedV6NetworkGroupIpMask OBJECT-TYPE
SYNTAX Ipv6Address
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "IP mask for network group entry."
::= { alaQoSAppliedV6NetworkGroupEntry 2 }
alaQoSAppliedV6NetworkGroupStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Used to create/delete network group entries according to the
RowStatus convention"
::= { alaQoSAppliedV6NetworkGroupEntry 3 }
--
-- Definition of IP Network Summary Table
--
alaQoSIpNetworkSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaQoSIpNetworkSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Table of QoS IpNetworkSummary definitions."
::= { alaQoSMIBObjects 58 }
alaQoSIpNetworkSummaryEntry OBJECT-TYPE
SYNTAX AlaQoSIpNetworkSummaryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "Definition of QoS IpNetworkSummary."
INDEX {
alaQoSRuleName
}
::= { alaQoSIpNetworkSummaryTable 1 }
AlaQoSIpNetworkSummaryEntry ::=
SEQUENCE
{
alaQoSIpNetworkSummaryProtocol SnmpAdminString,
alaQoSIpNetworkSummarySourceIpAddressType InetAddressType,
alaQoSIpNetworkSummarySourceIpAddress InetAddress,
alaQoSIpNetworkSummaryDestinationIpAddressType InetAddressType,
alaQoSIpNetworkSummaryDestinationIpAddress InetAddress,
alaQoSIpNetworkSummarySourceGroup SnmpAdminString,
alaQoSIpNetworkSummaryDestinationGroup SnmpAdminString,
alaQoSIpNetworkSummaryVrfName SnmpAdminString,
alaQoSIpNetworkSummaryAction INTEGER,
alaQoSIpNetworkSummaryHitCount Counter64
}
alaQoSIpNetworkSummaryProtocol OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Network Protocols as specified in condition classifier for given rule."
::= { alaQoSIpNetworkSummaryEntry 1 }
alaQoSIpNetworkSummarySourceIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
{
ipv4 (1),
ipv6 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source Ip Address Type as specified in condition classifier for given rule."
::= { alaQoSIpNetworkSummaryEntry 2 }
alaQoSIpNetworkSummarySourceIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source IP address as specified in condition classifier for given rule."
::= { alaQoSIpNetworkSummaryEntry 3 }
alaQoSIpNetworkSummaryDestinationIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
{
ipv4 (1),
ipv6 (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination Ip Address Type as specified in condition classifier for given rule."
::= { alaQoSIpNetworkSummaryEntry 4 }
alaQoSIpNetworkSummaryDestinationIpAddress OBJECT-TYPE
SYNTAX InetAddress (SIZE(4|16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination Ip Address as specified in condition classifier for given rule."
::= { alaQoSIpNetworkSummaryEntry 5 }
alaQoSIpNetworkSummarySourceGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Source Group as specified in condition classifier for given rule."
::= { alaQoSIpNetworkSummaryEntry 6 }
alaQoSIpNetworkSummaryDestinationGroup OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Destination Group as specified in condition classifier for given rule."
::= { alaQoSIpNetworkSummaryEntry 7 }
alaQoSIpNetworkSummaryVrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..31))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "VRF Name as specified in condition classifier for given rule."
::= { alaQoSIpNetworkSummaryEntry 8 }
alaQoSIpNetworkSummaryAction OBJECT-TYPE
SYNTAX INTEGER
{
accept (1),
deny (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The action performed when the packet hit the rule."
::= { alaQoSIpNetworkSummaryEntry 9 }
alaQoSIpNetworkSummaryHitCount OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Number of packets hit the rule."
::= { alaQoSIpNetworkSummaryEntry 10 }
--
-- Conformance Information
--
alaQoSMIBConformance OBJECT-IDENTITY
STATUS current
DESCRIPTION "Branch for QoS Managed Conformance Information."
::= { alaQoSMIB 2 }
alaQoSMIBGroups OBJECT-IDENTITY
STATUS current
DESCRIPTION "Branch for QoS Units of Conformance."
::= { alaQoSMIBConformance 1 }
alaQoSMIBCompliances OBJECT-IDENTITY
STATUS current
DESCRIPTION "Branch for QoS Compliance Statements."
::= { alaQoSMIBConformance 2 }
alaQoSMIBRuleObjects OBJECT-GROUP
OBJECTS {
alaQoSRuleEnabled,
alaQoSRuleSource,
alaQoSRulePrecedence,
alaQoSRuleCondition,
alaQoSRuleAction,
alaQoSRuleReflexive,
alaQoSRuleSave,
alaQoSRuleLog,
alaQoSRuleEnforced,
alaQoSRuleActive,
alaQoSRuleRowStatus,
alaQoSRuleValidityPeriod,
alaQoSRuleValidityPeriodStatus,
alaQoSRuleLogInterval,
alaQoSRuleCountType,
alaQoSRulePacketCount,
alaQoSRuleByteCount,
alaQoSRuleType,
alaQoSRuleTrapEvents,
alaQoSRuleDefaultList,
alaQoSRuleGreenPacketCount,
alaQoSRuleYellowPacketCount,
alaQoSRuleRedPacketCount,
alaQoSRuleGreenByteCount,
alaQoSRuleYellowByteCount,
alaQoSRuleRedByteCount
}
STATUS current
DESCRIPTION "Collections of objects providing information for Rules"
::= { alaQoSMIBGroups 1 }
alaQoSMIBAppliedRuleObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedRuleEnabled,
alaQoSAppliedRuleSource,
alaQoSAppliedRulePrecedence,
alaQoSAppliedRuleCondition,
alaQoSAppliedRuleAction,
alaQoSAppliedRuleReflexive,
alaQoSAppliedRuleSave,
alaQoSAppliedRuleLog,
alaQoSAppliedRuleEnforced,
alaQoSAppliedRuleActive,
alaQoSAppliedRuleRowStatus,
alaQoSAppliedRuleValidityPeriod,
alaQoSAppliedRuleValidityPeriodStatus,
alaQoSAppliedRuleLogInterval,
alaQoSAppliedRuleCountType,
alaQoSAppliedRulePacketCount,
alaQoSAppliedRuleByteCount,
alaQoSAppliedRuleType,
alaQoSAppliedRuleTrapEvents,
alaQoSAppliedRuleDefaultList,
alaQoSAppliedRuleGreenPacketCount,
alaQoSAppliedRuleYellowPacketCount,
alaQoSAppliedRuleRedPacketCount,
alaQoSAppliedRuleGreenByteCount,
alaQoSAppliedRuleYellowByteCount,
alaQoSAppliedRuleRedByteCount
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied Rules"
::= { alaQoSMIBGroups 2 }
alaQoSMIBConditionObjects OBJECT-GROUP
OBJECTS {
alaQoSConditionSource,
alaQoSConditionSourceSlot,
alaQoSConditionSourceSlotStatus,
alaQoSConditionSourcePort,
alaQoSConditionSourcePortGroup,
alaQoSConditionSourcePortGroupStatus,
alaQoSConditionDestinationSlot,
alaQoSConditionDestinationSlotStatus,
alaQoSConditionDestinationPort,
alaQoSConditionDestinationPortGroup,
alaQoSConditionDestinationPortGroupStatus,
alaQoSConditionSourceMacAddr,
alaQoSConditionSourceMacAddrStatus,
alaQoSConditionSourceMacMask,
alaQoSConditionSourceMacGroup,
alaQoSConditionSourceMacGroupStatus,
alaQoSConditionDestinationMacAddr,
alaQoSConditionDestinationMacAddrStatus,
alaQoSConditionDestinationMacMask,
alaQoSConditionDestinationMacGroup,
alaQoSConditionDestinationMacGroupStatus,
alaQoSConditionSourceVlan,
alaQoSConditionSourceVlanStatus,
alaQoSConditionDestinationVlan,
alaQoSConditionDestinationVlanStatus,
alaQoSCondition8021p,
alaQoSCondition8021pStatus,
alaQoSConditionSourceIpAddr,
alaQoSConditionSourceIpAddrStatus,
alaQoSConditionSourceIpMask,
alaQoSConditionSourceNetworkGroup,
alaQoSConditionSourceNetworkGroupStatus,
alaQoSConditionDestinationIpAddr,
alaQoSConditionDestinationIpAddrStatus,
alaQoSConditionDestinationIpMask,
alaQoSConditionDestinationNetworkGroup,
alaQoSConditionDestinationNetworkGroupStatus,
alaQoSConditionMulticastIpAddr,
alaQoSConditionMulticastIpAddrStatus,
alaQoSConditionMulticastIpMask,
alaQoSConditionMulticastNetworkGroup,
alaQoSConditionMulticastNetworkGroupStatus,
alaQoSConditionTos,
alaQoSConditionTosStatus,
alaQoSConditionTosMask,
alaQoSConditionDscp,
alaQoSConditionDscpStatus,
alaQoSConditionDscpMask,
alaQoSConditionIpProtocol,
alaQoSConditionIpProtocolStatus,
alaQoSConditionSourceIpPort,
alaQoSConditionSourceIpPortStatus,
alaQoSConditionDestinationIpPort,
alaQoSConditionDestinationIpPortStatus,
alaQoSConditionService,
alaQoSConditionServiceStatus,
alaQoSConditionServiceGroup,
alaQoSConditionServiceGroupStatus,
alaQoSConditionIcmpType,
alaQoSConditionIcmpTypeStatus,
alaQoSConditionIcmpCode,
alaQoSConditionIcmpCodeStatus,
alaQoSConditionRowStatus,
alaQoSConditionSourcePortEnd,
alaQoSConditionDestinationPortEnd,
alaQoSConditionSourceIpPortEnd,
alaQoSConditionDestinationIpPortEnd,
alaQoSConditionSourceTcpPort,
alaQoSConditionSourceTcpPortStatus,
alaQoSConditionSourceTcpPortEnd,
alaQoSConditionDestinationTcpPort,
alaQoSConditionDestinationTcpPortStatus,
alaQoSConditionDestinationTcpPortEnd,
alaQoSConditionSourceUdpPort,
alaQoSConditionSourceUdpPortStatus,
alaQoSConditionSourceUdpPortEnd,
alaQoSConditionDestinationUdpPort,
alaQoSConditionDestinationUdpPortStatus,
alaQoSConditionDestinationUdpPortEnd,
alaQoSConditionEthertype,
alaQoSConditionEthertypeStatus,
alaQoSConditionTcpFlags,
alaQoSConditionTcpFlagsStatus,
alaQoSConditionTcpFlagsVal,
alaQoSConditionTcpFlagsValStatus,
alaQoSConditionTcpFlagsMask,
alaQoSConditionTcpFlagsMaskStatus,
alaQoSConditionTcpEstablished,
alaQoSConditionSourceIpv6Addr,
alaQoSConditionSourceIpv6AddrStatus,
alaQoSConditionSourceIpv6Mask,
alaQoSConditionDestinationIpv6Addr,
alaQoSConditionDestinationIpv6AddrStatus,
alaQoSConditionDestinationIpv6Mask,
alaQoSConditionIpv6Traffic,
alaQoSConditionIpv6NH,
alaQoSConditionIpv6NHStatus,
alaQoSConditionIpv6FlowLabel,
alaQoSConditionIpv6FlowLabelStatus,
alaQoSConditionMcastIpv6Addr,
alaQoSConditionMcastIpv6AddrStatus,
alaQoSConditionMcastIpv6Mask,
alaQoSConditionDscpEnd,
alaQoSConditionInnerSourceVlan,
alaQoSConditionInnerSourceVlanStatus,
alaQoSConditionInner8021p,
alaQoSConditionInner8021pStatus,
alaQoSConditionVrfName,
alaQoSConditionVrfNameStatus,
alaQoSConditionFragments,
alaQoSConditionSourceChassis,
alaQoSConditionDestinationChassis,
alaQoSConditionAppFpGroup,
alaQoSConditionAppFpGroupStatus,
alaQoSConditionSIP,
alaQoSConditionSIPStatus,
alaQoSConditionDPIAppName,
alaQoSConditionDPIGrpName,
alaQoSConditionDPIAppNameStatus,
alaQoSConditionDPIAppGroupStatus,
alaQoSConditionVxlanVni,
alaQoSConditionVxlanVniStatus,
alaQoSConditionVxlanPort,
alaQoSConditionVxlanPortStatus,
alaQoSConditionVmSourceMacAddr,
alaQoSConditionVmSourceMacAddrStatus,
alaQoSConditionVmSourceMacMask,
alaQoSConditionVmSourceIpAddr,
alaQoSConditionVmSourceIpAddrStatus,
alaQoSConditionVmSourceIpMask,
alaQoSConditionVmSourceIpv6IpAddr,
alaQoSConditionVmSourceIpv6IpAddrStatus,
alaQoSConditionVmSourceIpv6IpMask,
alaQoSConditionVmIpProtocol,
alaQoSConditionVmIpProtocolStatus,
alaQosConditionVmL4SourcePort,
alaQosConditionVmL4SourcePortStatus,
alaQosConditionVmL4DestPort,
alaQosConditionVmL4DestPortStatus,
alaQosConditionVxlanStatus,
alaQoSConditionSourcePortSplitGroup,
alaQoSConditionSourcePortSplitGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for Conditions"
::= { alaQoSMIBGroups 3 }
alaQoSMIBAppliedConditionObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedConditionSource,
alaQoSAppliedConditionSourceSlot,
alaQoSAppliedConditionSourceSlotStatus,
alaQoSAppliedConditionSourcePort,
alaQoSAppliedConditionSourcePortGroup,
alaQoSAppliedConditionSourcePortGroupStatus,
alaQoSAppliedConditionDestinationSlot,
alaQoSAppliedConditionDestinationSlotStatus,
alaQoSAppliedConditionDestinationPort,
alaQoSAppliedConditionDestinationPortGroup,
alaQoSAppliedConditionDestinationPortGroupStatus,
alaQoSAppliedConditionSourceMacAddr,
alaQoSAppliedConditionSourceMacAddrStatus,
alaQoSAppliedConditionSourceMacMask,
alaQoSAppliedConditionSourceMacGroup,
alaQoSAppliedConditionSourceMacGroupStatus,
alaQoSAppliedConditionDestinationMacAddr,
alaQoSAppliedConditionDestinationMacAddrStatus,
alaQoSAppliedConditionDestinationMacMask,
alaQoSAppliedConditionDestinationMacGroup,
alaQoSAppliedConditionDestinationMacGroupStatus,
alaQoSAppliedConditionSourceVlan,
alaQoSAppliedConditionSourceVlanStatus,
alaQoSAppliedConditionDestinationVlan,
alaQoSAppliedConditionDestinationVlanStatus,
alaQoSAppliedCondition8021p,
alaQoSAppliedCondition8021pStatus,
alaQoSAppliedConditionSourceIpAddr,
alaQoSAppliedConditionSourceIpAddrStatus,
alaQoSAppliedConditionSourceIpMask,
alaQoSAppliedConditionSourceNetworkGroup,
alaQoSAppliedConditionSourceNetworkGroupStatus,
alaQoSAppliedConditionDestinationIpAddr,
alaQoSAppliedConditionDestinationIpAddrStatus,
alaQoSAppliedConditionDestinationIpMask,
alaQoSAppliedConditionDestinationNetworkGroup,
alaQoSAppliedConditionDestinationNetworkGroupStatus,
alaQoSAppliedConditionMulticastIpAddr,
alaQoSAppliedConditionMulticastIpAddrStatus,
alaQoSAppliedConditionMulticastIpMask,
alaQoSAppliedConditionMulticastNetworkGroup,
alaQoSAppliedConditionMulticastNetworkGroupStatus,
alaQoSAppliedConditionTos,
alaQoSAppliedConditionTosStatus,
alaQoSAppliedConditionTosMask,
alaQoSAppliedConditionDscp,
alaQoSAppliedConditionDscpStatus,
alaQoSAppliedConditionDscpMask,
alaQoSAppliedConditionIpProtocol,
alaQoSAppliedConditionIpProtocolStatus,
alaQoSAppliedConditionSourceIpPort,
alaQoSAppliedConditionSourceIpPortStatus,
alaQoSAppliedConditionDestinationIpPort,
alaQoSAppliedConditionDestinationIpPortStatus,
alaQoSAppliedConditionService,
alaQoSAppliedConditionServiceStatus,
alaQoSAppliedConditionServiceGroup,
alaQoSAppliedConditionServiceGroupStatus,
alaQoSAppliedConditionIcmpType,
alaQoSAppliedConditionIcmpTypeStatus,
alaQoSAppliedConditionIcmpCode,
alaQoSAppliedConditionIcmpCodeStatus,
alaQoSAppliedConditionRowStatus,
alaQoSAppliedConditionSourcePortEnd,
alaQoSAppliedConditionDestinationPortEnd,
alaQoSAppliedConditionSourceIpPortEnd,
alaQoSAppliedConditionDestinationIpPortEnd,
alaQoSAppliedConditionSourceTcpPort,
alaQoSAppliedConditionSourceTcpPortStatus,
alaQoSAppliedConditionSourceTcpPortEnd,
alaQoSAppliedConditionDestinationTcpPort,
alaQoSAppliedConditionDestinationTcpPortStatus,
alaQoSAppliedConditionDestinationTcpPortEnd,
alaQoSAppliedConditionSourceUdpPort,
alaQoSAppliedConditionSourceUdpPortStatus,
alaQoSAppliedConditionSourceUdpPortEnd,
alaQoSAppliedConditionDestinationUdpPort,
alaQoSAppliedConditionDestinationUdpPortStatus,
alaQoSAppliedConditionDestinationUdpPortEnd,
alaQoSAppliedConditionEthertype,
alaQoSAppliedConditionEthertypeStatus,
alaQoSAppliedConditionTcpFlags,
alaQoSAppliedConditionTcpFlagsStatus,
alaQoSAppliedConditionTcpFlagsVal,
alaQoSAppliedConditionTcpFlagsValStatus,
alaQoSAppliedConditionTcpFlagsMask,
alaQoSAppliedConditionTcpFlagsMaskStatus,
alaQoSAppliedConditionTcpEstablished,
alaQoSAppliedConditionSourceIpv6Addr,
alaQoSAppliedConditionSourceIpv6AddrStatus,
alaQoSAppliedConditionSourceIpv6Mask,
alaQoSAppliedConditionDestinationIpv6Addr,
alaQoSAppliedConditionDestinationIpv6AddrStatus,
alaQoSAppliedConditionDestinationIpv6Mask,
alaQoSAppliedConditionIpv6Traffic,
alaQoSAppliedConditionIpv6NH,
alaQoSAppliedConditionIpv6NHStatus,
alaQoSAppliedConditionIpv6FlowLabel,
alaQoSAppliedConditionIpv6FlowLabelStatus,
alaQoSAppliedConditionMcastIpv6Addr,
alaQoSAppliedConditionMcastIpv6AddrStatus,
alaQoSAppliedConditionMcastIpv6Mask,
alaQoSAppliedConditionDscpEnd,
alaQoSAppliedConditionInnerSourceVlan,
alaQoSAppliedConditionInnerSourceVlanStatus,
alaQoSAppliedConditionInner8021p,
alaQoSAppliedConditionInner8021pStatus,
alaQoSAppliedConditionVrfName,
alaQoSAppliedConditionVrfNameStatus,
alaQoSAppliedConditionFragments,
alaQoSAppliedConditionSourceChassis,
alaQoSAppliedConditionDestinationChassis,
alaQoSAppliedConditionAppFpGroup,
alaQoSAppliedConditionAppFpGroupStatus,
alaQoSAppliedConditionSIP,
alaQoSAppliedConditionSIPStatus,
alaQoSAppliedConditionDPIAppName,
alaQoSAppliedConditionDPIAppGrp,
alaQoSAppliedConditionDPIAppNameStatus,
alaQoSAppliedConditionDPIAppGroupStatus,
alaQoSAppliedConditionVxlanVni,
alaQoSAppliedConditionVxlanVniStatus,
alaQoSAppliedConditionVxlanPort,
alaQoSAppliedConditionVxlanPortStatus,
alaQoSAppliedConditionVmSourceMacAddr,
alaQoSAppliedConditionVmSourceMacAddrStatus,
alaQoSAppliedConditionVmSourceMacMask,
alaQoSAppliedConditionVmSourceIpAddr,
alaQoSAppliedConditionVmSourceIpAddrStatus,
alaQoSAppliedConditionVmSourceIpMask,
alaQoSAppliedConditionVmSourceIpv6IpAddr,
alaQoSAppliedConditionVmSourceIpv6IpAddrStatus,
alaQoSAppliedConditionVmSourceIpv6IpMask,
alaQoSAppliedConditionVmIpProtocol,
alaQoSAppliedConditionVmIpProtocolStatus,
alaQosAppliedConditionVmL4SourcePort,
alaQosAppliedConditionVmL4SourcePortStatus,
alaQosAppliedConditionVmL4DestPort,
alaQosAppliedConditionVmL4DestPortStatus,
alaQosAppliedConditionVxlanStatus,
alaQoSAppliedConditionSourcePortSplitGroup,
alaQoSAppliedConditionSourcePortSplitGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied Conditions"
::= { alaQoSMIBGroups 4 }
alaQoSMIBServiceObjects OBJECT-GROUP
OBJECTS {
alaQoSServiceSource,
alaQoSServiceProtocol,
alaQoSServiceSourceIpPort,
alaQoSServiceSourceIpPortStatus,
alaQoSServiceDestinationIpPort,
alaQoSServiceDestinationIpPortStatus,
alaQoSServiceRowStatus,
alaQoSServiceSourceIpPortEnd,
alaQoSServiceDestinationIpPortEnd,
alaQoSServiceSourceTcpPort,
alaQoSServiceSourceTcpPortStatus,
alaQoSServiceSourceTcpPortEnd,
alaQoSServiceDestinationTcpPort,
alaQoSServiceDestinationTcpPortStatus,
alaQoSServiceDestinationTcpPortEnd,
alaQoSServiceSourceUdpPort,
alaQoSServiceSourceUdpPortStatus,
alaQoSServiceSourceUdpPortEnd,
alaQoSServiceDestinationUdpPort,
alaQoSServiceDestinationUdpPortStatus,
alaQoSServiceDestinationUdpPortEnd
}
STATUS current
DESCRIPTION "Collections of objects providing information for Services"
::= { alaQoSMIBGroups 5 }
alaQoSMIBAppliedServiceObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedServiceSource,
alaQoSAppliedServiceProtocol,
alaQoSAppliedServiceSourceIpPort,
alaQoSAppliedServiceSourceIpPortStatus,
alaQoSAppliedServiceDestinationIpPort,
alaQoSAppliedServiceDestinationIpPortStatus,
alaQoSAppliedServiceRowStatus,
alaQoSAppliedServiceSourceIpPortEnd,
alaQoSAppliedServiceDestinationIpPortEnd,
alaQoSAppliedServiceSourceTcpPort,
alaQoSAppliedServiceSourceTcpPortStatus,
alaQoSAppliedServiceSourceTcpPortEnd,
alaQoSAppliedServiceDestinationTcpPort,
alaQoSAppliedServiceDestinationTcpPortStatus,
alaQoSAppliedServiceDestinationTcpPortEnd,
alaQoSAppliedServiceSourceUdpPort,
alaQoSAppliedServiceSourceUdpPortStatus,
alaQoSAppliedServiceSourceUdpPortEnd,
alaQoSAppliedServiceDestinationUdpPort,
alaQoSAppliedServiceDestinationUdpPortStatus,
alaQoSAppliedServiceDestinationUdpPortEnd
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied Services"
::= { alaQoSMIBGroups 6 }
alaQoSMIBServiceGroupsObjects OBJECT-GROUP
OBJECTS {
alaQoSServiceGroupsSource,
alaQoSServiceGroupsStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for ServiceGroups"
::= { alaQoSMIBGroups 7 }
alaQoSMIBAppliedServiceGroupsObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedServiceGroupsSource,
alaQoSAppliedServiceGroupsStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied ServiceGroups"
::= { alaQoSMIBGroups 8 }
alaQoSMIBServiceGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSServiceGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for ServiceGroups"
::= { alaQoSMIBGroups 9 }
alaQoSMIBAppliedServiceGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedServiceGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied ServiceGroups"
::= { alaQoSMIBGroups 10 }
alaQoSMIBNetworkGroupsObjects OBJECT-GROUP
OBJECTS {
alaQoSNetworkGroupsSource,
alaQoSNetworkGroupsStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for NetworkGroups"
::= { alaQoSMIBGroups 11 }
alaQoSMIBAppliedNetworkGroupsObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedNetworkGroupsSource,
alaQoSAppliedNetworkGroupsStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied NetworkGroups"
::= { alaQoSMIBGroups 12 }
alaQoSMIBNetworkGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSNetworkGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for NetworkGroups"
::= { alaQoSMIBGroups 13 }
alaQoSMIBAppliedNetworkGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedNetworkGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied NetworkGroups"
::= { alaQoSMIBGroups 14 }
alaQoSMIBMACGroupsObjects OBJECT-GROUP
OBJECTS {
alaQoSMACGroupsSource,
alaQoSMACGroupsStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for MACGroups"
::= { alaQoSMIBGroups 15 }
alaQoSMIBAppliedMACGroupsObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedMACGroupsSource,
alaQoSAppliedMACGroupsStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied MACGroups"
::= { alaQoSMIBGroups 16 }
alaQoSMIBMACGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSMACGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for MACGroups"
::= { alaQoSMIBGroups 17 }
alaQoSMIBAppliedMACGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedMACGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied MACGroups"
::= { alaQoSMIBGroups 18 }
alaQoSMIBPortGroupsObjects OBJECT-GROUP
OBJECTS {
alaQoSPortGroupsSource,
alaQoSPortGroupsStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for PortGroups"
::= { alaQoSMIBGroups 19 }
alaQoSMIBAppliedPortGroupsObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedPortGroupsSource,
alaQoSAppliedPortGroupsStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied PortGroups"
::= { alaQoSMIBGroups 20 }
alaQoSMIBPortGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSPortGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for PortGroups"
::= { alaQoSMIBGroups 21 }
alaQoSMIBAppliedPortGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedPortGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied PortGroups"
::= { alaQoSMIBGroups 22 }
alaQoSMIBMapGroupsObjects OBJECT-GROUP
OBJECTS {
alaQoSMapGroupsSource,
alaQoSMapGroupsStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for MapGroups"
::= { alaQoSMIBGroups 23 }
alaQoSMIBAppliedMapGroupsObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedMapGroupsSource,
alaQoSAppliedMapGroupsStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied MapGroups"
::= { alaQoSMIBGroups 24 }
alaQoSMIBMapGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSMapGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for MapGroups"
::= { alaQoSMIBGroups 25 }
alaQoSMIBAppliedMapGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedMapGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied MapGroups"
::= { alaQoSMIBGroups 26 }
alaQoSMIBActionObjects OBJECT-GROUP
OBJECTS {
alaQoSActionSource,
alaQoSActionDisposition,
alaQoSActionMaximumBandwidth,
alaQoSActionMaximumBandwidthStatus,
alaQoSActionPriority,
alaQoSActionPriorityStatus,
alaQoSActionShared,
alaQoSActionMaximumDepth,
alaQoSActionMaximumDepthStatus,
alaQoSAction8021p,
alaQoSAction8021pStatus,
alaQoSActionTos,
alaQoSActionTosStatus,
alaQoSActionDscp,
alaQoSActionDscpStatus,
alaQoSActionMapFrom,
alaQoSActionMapTo,
alaQoSActionMapGroup,
alaQoSActionMapGroupStatus,
alaQoSActionLoadBalanceGroup,
alaQoSActionLoadBalanceGroupStatus,
alaQoSActionPermanentGatewayIpAddr,
alaQoSActionPermanentGatewayIpAddrStatus,
alaQoSActionAlternateGatewayIpAddr,
alaQoSActionAlternateGatewayIpAddrStatus,
alaQoSActionRowStatus,
alaQoSActionNocache,
alaQoSActionPortdisable,
alaQoSActionRedirectSlot,
alaQoSActionRedirectSlotStatus,
alaQoSActionRedirectPort,
alaQoSActionRedirectAgg,
alaQoSActionRedirectAggStatus,
alaQoSActionMirrorSlot,
alaQoSActionMirrorPort,
alaQoSActionMirrorMode,
alaQoSActionMirrorModeStatus,
alaQoSActionCIR,
alaQoSActionCIRStatus,
alaQoSActionCBS,
alaQoSActionCBSStatus,
alaQoSActionPIR,
alaQoSActionPIRStatus,
alaQoSActionPBS,
alaQoSActionPBSStatus,
alaQoSActionCPUPriority,
alaQoSActionCPUPriorityStatus,
alaQoSActionColorOnly,
alaQoSActionRedirectChassis,
alaQoSActionMirrorChassis,
alaQoSActionPermanentGatewayIpV6Addr,
alaQoSActionPermanentGatewayIpV6AddrStatus,
alaQoSActionPermanentGatewayIpV6IfIndex,
alaQoSActionRTCPMonitor,
alaQoSActionRTCPMonitorStatus,
alaQoSActionRTCPDSCP,
alaQoSActionRTCPDSCPStatus,
alaQoSActionTrustDSCP,
alaQoSActionTrustDSCPStatus,
alaQoSActionRedirectModule
}
STATUS current
DESCRIPTION "Collections of objects providing information for Actions"
::= { alaQoSMIBGroups 27 }
alaQoSMIBAppliedActionObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedActionSource,
alaQoSAppliedActionDisposition,
alaQoSAppliedActionMaximumBandwidth,
alaQoSAppliedActionMaximumBandwidthStatus,
alaQoSAppliedActionPriority,
alaQoSAppliedActionPriorityStatus,
alaQoSAppliedActionShared,
alaQoSAppliedActionMaximumDepth,
alaQoSAppliedActionMaximumDepthStatus,
alaQoSAppliedAction8021p,
alaQoSAppliedAction8021pStatus,
alaQoSAppliedActionTos,
alaQoSAppliedActionTosStatus,
alaQoSAppliedActionDscp,
alaQoSAppliedActionDscpStatus,
alaQoSAppliedActionMapFrom,
alaQoSAppliedActionMapTo,
alaQoSAppliedActionMapGroup,
alaQoSAppliedActionMapGroupStatus,
alaQoSAppliedActionLoadBalanceGroup,
alaQoSAppliedActionLoadBalanceGroupStatus,
alaQoSAppliedActionPermanentGatewayIpAddr,
alaQoSAppliedActionPermanentGatewayIpAddrStatus,
alaQoSAppliedActionAlternateGatewayIpAddr,
alaQoSAppliedActionAlternateGatewayIpAddrStatus,
alaQoSAppliedActionRowStatus,
alaQoSAppliedActionNocache,
alaQoSAppliedActionPortdisable,
alaQoSAppliedActionRedirectSlot,
alaQoSAppliedActionRedirectSlotStatus,
alaQoSAppliedActionRedirectPort,
alaQoSAppliedActionRedirectAgg,
alaQoSAppliedActionRedirectAggStatus,
alaQoSAppliedActionMirrorSlot,
alaQoSAppliedActionMirrorPort,
alaQoSAppliedActionMirrorMode,
alaQoSAppliedActionMirrorModeStatus,
alaQoSAppliedActionCIR,
alaQoSAppliedActionCIRStatus,
alaQoSAppliedActionCBS,
alaQoSAppliedActionCBSStatus,
alaQoSAppliedActionPIR,
alaQoSAppliedActionPIRStatus,
alaQoSAppliedActionPBS,
alaQoSAppliedActionPBSStatus,
alaQoSAppliedActionCPUPriority,
alaQoSAppliedActionCPUPriorityStatus,
alaQoSAppliedActionColorOnly,
alaQoSAppliedActionRedirectChassis,
alaQoSAppliedActionMirrorChassis,
alaQoSAppliedActionPermanentGatewayIpV6Addr,
alaQoSAppliedActionPermanentGatewayIpV6AddrStatus,
alaQoSAppliedActionPermanentGatewayIpV6IfIndex,
alaQoSAppliedActionRTCPMonitor,
alaQoSAppliedActionRTCPMonitorStatus,
alaQoSAppliedActionRTCPDSCP,
alaQoSAppliedActionRTCPDSCPStatus,
alaQoSAppliedActionTrustDSCP,
alaQoSAppliedActionTrustDSCPStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied Actions"
::= { alaQoSMIBGroups 28 }
alaQoSMIBPortObjects OBJECT-GROUP
OBJECTS {
alaQoSPortInterfaceType,
alaQoSPortTrusted,
alaQoSPortDefault8021p,
alaQoSPortDefaultDSCP,
alaQoSPortMaximumDefaultDepth,
alaQoSPortMaximumDefaultDepthStatus,
alaQoSPortReset,
alaQoSPortPhysicalBandwidth,
alaQoSPortRowStatus,
alaQoSPortDefaultClassification,
alaQoSPortMaximumBandwidth,
alaQoSPortMaximumBandwidthStatus,
alaQoSPortMaximumIngBandwidth,
alaQoSPortMaximumIngBandwidthStatus,
alaQoSPortMaximumIngressDepth,
alaQoSPortMaximumIngressDepthStatus,
alaQoSPortDEIMarking,
alaQoSPortDEIMapping
}
STATUS current
DESCRIPTION "Collections of objects providing information for Ports"
::= { alaQoSMIBGroups 29 }
alaQoSMIBConfigObjects OBJECT-GROUP
OBJECTS {
alaQoSConfigEnabled,
alaQoSConfigTrustPorts,
alaQoSConfigStatsInterval,
alaQoSConfigLogLines,
alaQoSConfigLogLevel,
alaQoSConfigLogConsole,
alaQoSConfigForwardLog,
alaQoSConfigClearLog,
alaQoSConfigApply,
alaQoSConfigRevert,
alaQoSConfigReset,
alaQoSConfigStatsReset,
alaQoSConfigFlush,
alaQoSConfigDebug,
alaQoSConfigUserportFilter,
alaQoSConfigAppliedUserportFilter,
alaQoSConfigUserportShutdown,
alaQoSConfigAppliedUserportShutdown,
alaQoSConfigAutoPhones,
alaQoSConfigQMPage,
alaQoSConfigQMMACGroup,
alaQoSConfigQMPath,
alaQoSConfigDEIMapping,
alaQoSConfigDEIMarking,
alaQoSConfigSwitchGroup,
alaQoSVmSnooping
}
STATUS current
DESCRIPTION "Collections of objects providing information for Configs"
::= { alaQoSMIBGroups 30 }
alaQoSMIBStatsObjects OBJECT-GROUP
OBJECTS {
alaQoSStatsSpoofedEvents,
alaQoSStatsNonSpoofedEvents
}
STATUS current
DESCRIPTION "Collections of objects providing information for Statss"
::= { alaQoSMIBGroups 31 }
alaQoSMIBRuleGroupsObjects OBJECT-GROUP
OBJECTS {
alaQoSRuleGroupsSource,
alaQoSRuleGroupsType,
alaQoSRuleGroupsEnabled,
alaQoSRuleGroupsStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for RuleGroups"
::= { alaQoSMIBGroups 32 }
alaQoSMIBAppliedRuleGroupsObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedRuleGroupsSource,
alaQoSAppliedRuleGroupsType,
alaQoSAppliedRuleGroupsEnabled,
alaQoSAppliedRuleGroupsStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied RuleGroups"
::= { alaQoSMIBGroups 33 }
alaQoSMIBRuleGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSRuleGroupMatches,
alaQoSRuleGroupCountType,
alaQoSRuleGroupPacketCount,
alaQoSRuleGroupByteCount,
alaQoSRuleGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for RuleGroups"
::= { alaQoSMIBGroups 34 }
alaQoSMIBAppliedRuleGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedRuleGroupMatches,
alaQoSAppliedRuleGroupCountType,
alaQoSAppliedRuleGroupPacketCount,
alaQoSAppliedRuleGroupByteCount,
alaQoSAppliedRuleGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied RuleGroups"
::= { alaQoSMIBGroups 35 }
alaQoSMIBValidityPeriodObjects OBJECT-GROUP
OBJECTS {
alaQoSValidityPeriodSource,
alaQoSValidityPeriodDays,
alaQoSValidityPeriodDaysStatus,
alaQoSValidityPeriodMonths,
alaQoSValidityPeriodMonthsStatus,
alaQoSValidityPeriodHour,
alaQoSValidityPeriodHourStatus,
alaQoSValidityPeriodEndHour,
alaQoSValidityPeriodInterval,
alaQoSValidityPeriodIntervalStatus,
alaQoSValidityPeriodEndInterval,
alaQoSValidityPeriodRowStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for Validity Periods"
::= { alaQoSMIBGroups 36 }
alaQoSMIBAppliedValidityPeriodObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedValidityPeriodSource,
alaQoSAppliedValidityPeriodDays,
alaQoSAppliedValidityPeriodDaysStatus,
alaQoSAppliedValidityPeriodMonths,
alaQoSAppliedValidityPeriodMonthsStatus,
alaQoSAppliedValidityPeriodHour,
alaQoSAppliedValidityPeriodHourStatus,
alaQoSAppliedValidityPeriodEndHour,
alaQoSAppliedValidityPeriodInterval,
alaQoSAppliedValidityPeriodIntervalStatus,
alaQoSAppliedValidityPeriodEndInterval,
alaQoSAppliedValidityPeriodRowStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied Validity Periods"
::= { alaQoSMIBGroups 37 }
alaQoSMIBDSCPGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSDSCPPriority,
alaQoSDSCPDropPrecedence,
alaQoSDSCPRowStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for DSCP Table"
::= { alaQoSMIBGroups 38 }
alaQoSMIBAutoMacRangeGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSAutoMacRangeStart,
alaQoSAutoMacRangeEnd
}
STATUS current
DESCRIPTION "Collections of objects providing information
for Auto Qos Mac Range Table"
::= { alaQoSMIBGroups 39 }
alaQoSMIBV6NetworkGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSV6NetworkGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information for V6NetworkGroups"
::= { alaQoSMIBGroups 40 }
alaQoSMIBAppliedV6NetworkGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSAppliedV6NetworkGroupStatus
}
STATUS current
DESCRIPTION "Collections of objects providing information
for applied V6NetworkGroups"
::= { alaQoSMIBGroups 41 }
alaQoSRuleExtendedObjects OBJECT-GROUP
OBJECTS {
alaQoSExtendedRuleChassis,
alaQoSExtendedRuleSlot,
alaQoSExtendedRulePort,
alaQoSExtendedRulePacketCount,
alaQoSExtendedRuleByteCount,
alaQoSExtendedRuleGreenPacketCount,
alaQoSExtendedRuleYellowPacketCount,
alaQoSExtendedRuleRedPacketCount,
alaQoSExtendedRuleGreenByteCount,
alaQoSExtendedRuleYellowByteCount,
alaQoSExtendedRuleRedByteCount
}
STATUS current
DESCRIPTION "Collections of objects providing information
for rule extended"
::= { alaQoSMIBGroups 42 }
alaQoSIpNetworkSummaryGroupObjects OBJECT-GROUP
OBJECTS {
alaQoSIpNetworkSummaryProtocol,
alaQoSIpNetworkSummarySourceIpAddressType,
alaQoSIpNetworkSummarySourceIpAddress,
alaQoSIpNetworkSummaryDestinationIpAddressType,
alaQoSIpNetworkSummaryDestinationIpAddress,
alaQoSIpNetworkSummarySourceGroup,
alaQoSIpNetworkSummaryDestinationGroup,
alaQoSIpNetworkSummaryVrfName,
alaQoSIpNetworkSummaryAction,
alaQoSIpNetworkSummaryHitCount
}
STATUS current
DESCRIPTION "Collections of objects providing information for Ip Network Summary."
::= { alaQoSMIBGroups 43 }
alaQoSMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "Compliance statement for QoS."
MODULE
MANDATORY-GROUPS {
alaQoSMIBRuleObjects,
alaQoSMIBAppliedRuleObjects,
alaQoSMIBConditionObjects,
alaQoSMIBAppliedConditionObjects,
alaQoSMIBServiceObjects,
alaQoSMIBAppliedServiceObjects,
alaQoSMIBServiceGroupsObjects,
alaQoSMIBAppliedServiceGroupsObjects,
alaQoSMIBServiceGroupObjects,
alaQoSMIBAppliedServiceGroupObjects,
alaQoSMIBNetworkGroupsObjects,
alaQoSMIBAppliedNetworkGroupsObjects,
alaQoSMIBNetworkGroupObjects,
alaQoSMIBAppliedNetworkGroupObjects,
alaQoSMIBMACGroupsObjects,
alaQoSMIBAppliedMACGroupsObjects,
alaQoSMIBMACGroupObjects,
alaQoSMIBAppliedMACGroupObjects,
alaQoSMIBPortGroupsObjects,
alaQoSMIBAppliedPortGroupsObjects,
alaQoSMIBPortGroupObjects,
alaQoSMIBAppliedPortGroupObjects,
alaQoSMIBMapGroupsObjects,
alaQoSMIBAppliedMapGroupsObjects,
alaQoSMIBMapGroupObjects,
alaQoSMIBAppliedMapGroupObjects,
alaQoSMIBActionObjects,
alaQoSMIBAppliedActionObjects,
alaQoSMIBPortObjects,
alaQoSMIBConfigObjects,
alaQoSMIBStatsObjects,
alaQoSMIBRuleGroupsObjects,
alaQoSMIBAppliedRuleGroupsObjects,
alaQoSMIBRuleGroupObjects,
alaQoSMIBAppliedRuleGroupObjects,
alaQoSMIBValidityPeriodObjects,
alaQoSMIBAppliedValidityPeriodObjects,
alaQoSMIBDSCPGroupObjects,
alaQoSMIBAutoMacRangeGroupObjects,
alaQoSMIBV6NetworkGroupObjects,
alaQoSMIBAppliedV6NetworkGroupObjects,
alaQoSRuleExtendedObjects,
alaQoSIpNetworkSummaryGroupObjects
}
::= { alaQoSMIBCompliances 1 }
END