mibs/MIBS/oneaccess/ONEACCESS-SHDSL-MIB

693 lines
25 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- *****************************
-- * *
-- * ONEOS MIB *
-- * *
-- *****************************
--
-- ONEOS_MIB_STD_V05.1.R005_E001
--
-- Creation date : 07/08/2010
--
-- update OneOs V5.1 capabilities 07/08/2010
--
ONEACCESS-SHDSL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,Counter32,Counter64,Integer32
FROM SNMPv2-SMI
-- MODULE-COMPLIANCE, OBJECT-GROUP
-- FROM SNMPv2-CONF
ifIndex
FROM IF-MIB
oacExpIMSystem
FROM ONEACCESS-GLOBAL-REG
hdsl2ShdslSpanStatusEntry,hdsl2ShdslEndpointCurrEntry,hdsl2ShdslSpanConfProfileEntry
FROM HDSL2-SHDSL-LINE-MIB;
oacSHDSLMIBModule MODULE-IDENTITY
LAST-UPDATED "201106150000Z"
ORGANIZATION " OneAccess "
CONTACT-INFO
"Pascal KESTELOOT
Postal: ONE ACCESS
381 Avenue du General de Gaulle
92140 Clamart, France
FRANCE
Tel: (+33) 01 41 87 70 00
Fax: (+33) 01 41 87 74 00
E-mail: pascal.kesteloot@oneaccess-net.com"
DESCRIPTION
"Contact updated"
REVISION "201106150000Z"
DESCRIPTION
"This MIB module describes private extensions to the RFC4319 MIB."
-- Revision history
REVISION "201008200001Z"
DESCRIPTION "Added oacSHDSLSpanConfProfileEocManagement,
oacSHDSLSpanConfProfileEocStatusPollDelay and
oacSHDSLSpanConfProfileEocStatusPollInterval."
REVISION "201007300001Z"
DESCRIPTION "Added oacSHDSLSpanConfProfileTable."
REVISION "201007080001Z"
DESCRIPTION "Initial version."
::= { oacExpIMSystem 3 }
oacSHDSLObjects OBJECT IDENTIFIER ::= { oacSHDSLMIBModule 1 }
oacSHDSLSpanStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF OacSHDSLSpanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides overall status information of
HDSL2/SHDSL spans. This table contains live data from
equipment. As such, it is NOT persistent."
::= { oacSHDSLObjects 2 }
oacSHDSLSpanStatusEntry OBJECT-TYPE
SYNTAX OacSHDSLSpanStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the oacSHDSLSpanStatusTable. Each entry
represents the complete span in a single HDSL2/SHDSL line.
It is indexed by the ifIndex of the associated HDSL2/SHDSL
line."
AUGMENTS { hdsl2ShdslSpanStatusEntry }
::= { oacSHDSLSpanStatusTable 1 }
OacSHDSLSpanStatusEntry ::=
SEQUENCE
{
oacSHDSLSpanStatusUpDown Counter32,
oacSHDSLSpanStatusCurrStatus OCTET STRING,
oacSHDSLSpanStatusCurrShowtimeStart Counter32,
oacSHDSLSpanStatusCurrCellDelin Counter32,
oacSHDSLSpanStatusCurrCRCanomalies Counter32,
oacSHDSLSpanStatusCurrHECErrors Counter32,
oacSHDSLSpanStatusCurrRxCells Counter32,
oacSHDSLSpanStatusCurrTxCells Counter32,
oacSHDSLSpanStatusCurrRxDrops Counter32,
oacSHDSLSpanStatusCurrES Counter32,
oacSHDSLSpanStatusCurrSES Counter32,
oacSHDSLSpanStatusCurrLOSWS Counter32,
oacSHDSLSpanStatusCurrUAS Counter32,
oacSHDSLSpanStatusCurrConstellation INTEGER
}
oacSHDSLSpanStatusUpDown OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the Global Up/Down Counter for the span."
::= { oacSHDSLSpanStatusEntry 1 }
oacSHDSLSpanStatusCurrStatus OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(30))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current G.SHDSL Status."
::= { oacSHDSLSpanStatusEntry 2 }
oacSHDSLSpanStatusCurrShowtimeStart OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current Showtime Start."
::= { oacSHDSLSpanStatusEntry 3 }
oacSHDSLSpanStatusCurrCellDelin OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current Cell Delin counter."
::= { oacSHDSLSpanStatusEntry 4 }
oacSHDSLSpanStatusCurrCRCanomalies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current CRC counter."
::= { oacSHDSLSpanStatusEntry 5 }
oacSHDSLSpanStatusCurrHECErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current HEC counter."
::= { oacSHDSLSpanStatusEntry 6 }
oacSHDSLSpanStatusCurrRxCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current Rx Cells counter."
::= { oacSHDSLSpanStatusEntry 7 }
oacSHDSLSpanStatusCurrTxCells OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current Tx Cells counter."
::= { oacSHDSLSpanStatusEntry 8 }
oacSHDSLSpanStatusCurrRxDrops OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current Rx Drops counter."
::= { oacSHDSLSpanStatusEntry 9 }
oacSHDSLSpanStatusCurrES OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current ES counter."
::= { oacSHDSLSpanStatusEntry 10 }
oacSHDSLSpanStatusCurrSES OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current SES counter."
::= { oacSHDSLSpanStatusEntry 11 }
oacSHDSLSpanStatusCurrLOSWS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current LOSWS counter."
::= { oacSHDSLSpanStatusEntry 12 }
oacSHDSLSpanStatusCurrUAS OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Contains the current UAS counter."
::= { oacSHDSLSpanStatusEntry 13 }
oacSHDSLSpanStatusCurrConstellation OBJECT-TYPE
SYNTAX INTEGER
{
tcPam16(2),
tcPam32(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current constellation (line coding) for the span."
::= { oacSHDSLSpanStatusEntry 14 }
oacSHDSLEndpointCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF OacSHDSLEndpointCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current status and performance information
for segment endpoints in HDSL2/SHDSL lines. As with other
tables in this MIB module indexed by ifIndex, entries in this
table MUST be maintained in a persistent manner."
::= { oacSHDSLObjects 5 }
oacSHDSLEndpointCurrEntry OBJECT-TYPE
SYNTAX OacSHDSLEndpointCurrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the oacSHDSLEndpointCurrTable."
AUGMENTS {hdsl2ShdslEndpointCurrEntry}
::= { oacSHDSLEndpointCurrTable 1 }
OacSHDSLEndpointCurrEntry ::=
SEQUENCE {
oacSHDSLEndpointCurrAtn Integer32,
oacSHDSLEndpointCurrSnrMgn Integer32,
oacSHDSLEndpointCurrTxPwr Integer32,
oacSHDSLEndpointCurrRxGain Integer32,
oacSHDSLEndpointCurrMaxAttainableLineRate Integer32,
oacSHDSLEndpointCurrCommands Integer32,
oacSHDSLEndpointCurrResponses Integer32,
oacSHDSLEndpointCurrdiscardedCommands Integer32,
oacSHDSLEndpointCurrerroredCommands Integer32,
oacSHDSLEndpointCurrReceivedFrames Integer32,
oacSHDSLEndpointCurrBadTransparency Integer32,
oacSHDSLEndpointCurrBadFCS Integer32,
oacSHDSLEndpointCurrEOCStatus OCTET STRING
}
oacSHDSLEndpointCurrAtn OBJECT-TYPE
SYNTAX Integer32(-1270..1280)
UNITS "dB/10"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current loop attenuation for this endpoint as reported in
a Network or Customer Side Performance Status message. In tenths of dB."
::= { oacSHDSLEndpointCurrEntry 1 }
oacSHDSLEndpointCurrSnrMgn OBJECT-TYPE
SYNTAX Integer32(-1270..1280)
UNITS "dB/10"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current SNR margin for this endpoint as reported in a
Status Response/SNR message. In tenths of dB."
::= { oacSHDSLEndpointCurrEntry 2 }
oacSHDSLEndpointCurrTxPwr OBJECT-TYPE
SYNTAX Integer32
UNITS "dB/10"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current transmit power for this endpoint. In tenths of dB."
::= { oacSHDSLEndpointCurrEntry 3 }
oacSHDSLEndpointCurrRxGain OBJECT-TYPE
SYNTAX Integer32
UNITS "dB/10"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current receiver gain for this endpoint. In tenths of dB."
::= { oacSHDSLEndpointCurrEntry 4 }
oacSHDSLEndpointCurrMaxAttainableLineRate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Max Attainable LineRate for this endpoint."
::= { oacSHDSLEndpointCurrEntry 5 }
oacSHDSLEndpointCurrCommands OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Commands for this endpoint."
::= { oacSHDSLEndpointCurrEntry 6 }
oacSHDSLEndpointCurrResponses OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Responses for this endpoint."
::= { oacSHDSLEndpointCurrEntry 7 }
oacSHDSLEndpointCurrdiscardedCommands OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current discarded Commands for this endpoint."
::= { oacSHDSLEndpointCurrEntry 8 }
oacSHDSLEndpointCurrerroredCommands OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current errored Commands for this endpoint."
::= { oacSHDSLEndpointCurrEntry 9 }
oacSHDSLEndpointCurrReceivedFrames OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Received Frames for this endpoint."
::= { oacSHDSLEndpointCurrEntry 10 }
oacSHDSLEndpointCurrBadTransparency OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Bad Transparency for this endpoint."
::= { oacSHDSLEndpointCurrEntry 11 }
oacSHDSLEndpointCurrBadFCS OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current Bad FCS for this endpoint."
::= { oacSHDSLEndpointCurrEntry 12 }
oacSHDSLEndpointCurrEOCStatus OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(50))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current EOC Status for this endpoint."
::= { oacSHDSLEndpointCurrEntry 13 }
--
--
oacSHDSLEndpointCurrretrainTable OBJECT-TYPE
SYNTAX SEQUENCE OF OacSHDSLEndpointCurrretrainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains current status and performance information
for segment endpoints in HDSL2/SHDSL lines. As with other
tables in this MIB module indexed by ifIndex, entries in this
table MUST be maintained in a persistent manner."
::= { oacSHDSLObjects 7 }
oacSHDSLEndpointCurrretrainEntry OBJECT-TYPE
SYNTAX OacSHDSLEndpointCurrretrainEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the oacSHDSLEndpointCurrretrainTable."
AUGMENTS {hdsl2ShdslEndpointCurrEntry}
::= { oacSHDSLEndpointCurrretrainTable 1 }
OacSHDSLEndpointCurrretrainEntry ::=
SEQUENCE {
oacSHDSLEndpointCurrretrainSQPAIR Integer32,
oacSHDSLEndpointCurrretrainSQLINE Integer32,
oacSHDSLEndpointCurrretrainCRCPAIR Integer32,
oacSHDSLEndpointCurrretrainCRCLINE Integer32,
oacSHDSLEndpointCurrretrainFsyncPAIR Integer32,
oacSHDSLEndpointCurrretrainFsyncLINE Integer32,
oacSHDSLEndpointCurrretrainFSyncSQPAIR Integer32,
oacSHDSLEndpointCurrretrainFSyncSQLINE Integer32
}
oacSHDSLEndpointCurrretrainSQPAIR OBJECT-TYPE
SYNTAX Integer32
UNITS "SQPAIR"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current retrain SQ for this endpoint as reported in
a Network or Customer Side Performance Status message."
::= { oacSHDSLEndpointCurrretrainEntry 1 }
oacSHDSLEndpointCurrretrainSQLINE OBJECT-TYPE
SYNTAX Integer32
UNITS "SQLINE"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current retrain SQ for this endpoint as reported in
a Network or Customer Side Performance Status message."
::= { oacSHDSLEndpointCurrretrainEntry 2 }
oacSHDSLEndpointCurrretrainCRCPAIR OBJECT-TYPE
SYNTAX Integer32
UNITS "CRCPAIR"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current retrain CRC for this endpoint as reported in
a Network or Customer Side Performance Status message."
::= { oacSHDSLEndpointCurrretrainEntry 3 }
oacSHDSLEndpointCurrretrainCRCLINE OBJECT-TYPE
SYNTAX Integer32
UNITS "CRCLINE"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current retrain CRC for this endpoint as reported in
a Network or Customer Side Performance Status message."
::= { oacSHDSLEndpointCurrretrainEntry 4 }
oacSHDSLEndpointCurrretrainFsyncPAIR OBJECT-TYPE
SYNTAX Integer32
UNITS "FsyncPAIR"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current retrain Fsync for this endpoint as reported in
a Network or Customer Side Performance Status message."
::= { oacSHDSLEndpointCurrretrainEntry 5 }
oacSHDSLEndpointCurrretrainFsyncLINE OBJECT-TYPE
SYNTAX Integer32
UNITS "FsyncLINE"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current retrain Fsync for this endpoint as reported in
a Network or Customer Side Performance Status message."
::= { oacSHDSLEndpointCurrretrainEntry 6 }
oacSHDSLEndpointCurrretrainFSyncSQPAIR OBJECT-TYPE
SYNTAX Integer32
UNITS "FSync&SQPAIR"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current retrain FSync&SQ for this endpoint as reported in
a Network or Customer Side Performance Status message."
::= { oacSHDSLEndpointCurrretrainEntry 7 }
oacSHDSLEndpointCurrretrainFSyncSQLINE OBJECT-TYPE
SYNTAX Integer32
UNITS "FSync&SQLINE"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current retrain FSync&SQ for this endpoint as reported in
a Network or Customer Side Performance Status message."
::= { oacSHDSLEndpointCurrretrainEntry 8 }
-- OneAccess SHDSL MIB Trap Definitions
oacSHDSLTraps OBJECT IDENTIFIER ::= { oacSHDSLMIBModule 2 }
oacSHDSLTrapPrefix OBJECT IDENTIFIER ::= { oacSHDSLTraps 0 }
oacSHDSLHardDownTrap NOTIFICATION-TYPE
STATUS current
DESCRIPTION
"this notification indicate that the shdsl line speed is lower than the threshold configured in efm interface.
as consequence, the interface ethernet which the hard-down option is enable will be shutdown,
it will be UP if the shdsl line recovered the good linerate."
::= { oacSHDSLTrapPrefix 1 }
-- **************************** --
-- oacSHDSLSpanConfProfileTable --
-- **************************** --
oacSHDSLSpanConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF OacSHDSLSpanConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table supports definitions of span configuration
profiles for SHDSL lines. This table MUST be maintained
in a persistent manner"
::= { oacSHDSLObjects 10 }
oacSHDSLSpanConfProfileEntry OBJECT-TYPE
SYNTAX OacSHDSLSpanConfProfileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry corresponds to a single span configuration
profile. Each profile contains a set of span configuration
parameters. The configuration parameters in a profile are
applied to those lines referencing that profile (see the
hdsl2ShdslSpanConfProfile object). "
AUGMENTS {hdsl2ShdslSpanConfProfileEntry}
::= { oacSHDSLSpanConfProfileTable 1 }
OacSHDSLSpanConfProfileEntry ::=
SEQUENCE
{
oacSHDSLSpanConfProfileConstellation INTEGER,
oacSHDSLSpanConfProfileAutoConfig INTEGER,
oacSHDSLSpanConfProfileCaplist INTEGER,
oacSHDSLSpanConfProfileEfmAggregation INTEGER,
oacSHDSLSpanConfProfileCrcCheck Integer32,
oacSHDSLSpanConfProfileMeansqCheck Integer32,
oacSHDSLSpanConfProfileMeansqThreshold Integer32,
oacSHDSLSpanConfProfileLineProbing INTEGER,
oacSHDSLSpanConfProfileEocManagement INTEGER,
oacSHDSLSpanConfProfileEocStatusPollDelay Integer32,
oacSHDSLSpanConfProfileEocStatusPollInterval Integer32
}
oacSHDSLSpanConfProfileConstellation OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
tcPam16(2),
tcPam32(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured constellation (line coding) for the span.
Corresponds to cli command (controller shdsl 0, dsl-group 0):
annex ... tc-pam <value>"
::= { oacSHDSLSpanConfProfileEntry 1 }
oacSHDSLSpanConfProfileAutoConfig OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured auto configuration mode (enabled or disabled) for the span.
Corresponds to cli command (controller shdsl 0, dsl-group 0):
autoconfig / no autoconfig"
::= { oacSHDSLSpanConfProfileEntry 2 }
oacSHDSLSpanConfProfileCaplist OBJECT-TYPE
SYNTAX INTEGER
{
newstyle(1),
oldstyle(2),
auto(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured capability list style for the span.
Corresponds to cli command (controller shdsl 0, dsl-group 0):
caplist <value>"
::= { oacSHDSLSpanConfProfileEntry 3 }
oacSHDSLSpanConfProfileEfmAggregation OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
auto(2),
negotiated(3),
static(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured efm aggregation mode for the span.
Corresponds to cli command (controller shdsl 0, dsl-group 0):
efmaggregation <value>"
::= { oacSHDSLSpanConfProfileEntry 4 }
oacSHDSLSpanConfProfileCrcCheck OBJECT-TYPE
SYNTAX Integer32(0..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured numbered of consecutive seconds with crc errors after which the link will be retrained.
If the value is set to 0, than no retrain will occur based on crc errors.
Corresponds to cli command (controller shdsl 0, dsl-group 0):
value 0 : crc no
all other values: crc check <value> "
::= { oacSHDSLSpanConfProfileEntry 5 }
oacSHDSLSpanConfProfileMeansqCheck OBJECT-TYPE
SYNTAX Integer32(0..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured numbered of consecutive seconds where the noise margin is below
the configured threshold (oacSHDSLSpanConfProfileMeansqThreshold) after which the link will be retrained.
If the value is set to 0, than no retrain will occur based on noise margin verification.
Corresponds to cli command (controller shdsl 0, dsl-group 0):
value 0 : meansq no
all other values: meansq check <value> "
::= { oacSHDSLSpanConfProfileEntry 6 }
oacSHDSLSpanConfProfileMeansqThreshold OBJECT-TYPE
SYNTAX Integer32(-2..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured threshold (in dB) for retrain check based on the noise margin.
If the noise margin drops below the configured threshold for the configured time
(oacSHDSLSpanConfProfileMeansqCheck) than the link will be retrained.
Corresponds to cli command (controller shdsl 0, dsl-group 0):
meansq check <time> <value> "
::= { oacSHDSLSpanConfProfileEntry 7 }
oacSHDSLSpanConfProfileLineProbing OBJECT-TYPE
SYNTAX INTEGER
{
adaptive(1),
normal(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured linprobing mechanism.
- normal corresponds to the standard line probing (pmms) as defined in the standard (G.991.2).
- adaptive has to be used in situations where there is cross-talk between the lines of the same span.
A propriatary algorithm will be activated that will limit the maximum speed if the normal line probing
mechanism cannot reach a stable sync due to it's limitations (cross-talk is not taken into account in the
standard line probing mechanism). The disadvantage of the adaptive mode is that it can take a long time
before a stable sync is reached.
Corresponds to cli command (controller shdsl 0, dsl-group 0):
lineprobing <value> "
::= { oacSHDSLSpanConfProfileEntry 8 }
oacSHDSLSpanConfProfileEocManagement OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables/disables the EOC management of the SHDSL line in this unit."
DEFVAL { enabled }
::= { oacSHDSLSpanConfProfileEntry 9 }
oacSHDSLSpanConfProfileEocStatusPollDelay OBJECT-TYPE
SYNTAX Integer32(0..29)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The delay in seconds after the start of the full quarter of an hour when an EOC full status request
is sent to the devices in the span. Periodically after this start point full status request will
be sent with a configured interval (oacSHDSLSpanConfProfileEocStatusPollInterval)."
DEFVAL { 0 }
::= { oacSHDSLSpanConfProfileEntry 10 }
oacSHDSLSpanConfProfileEocStatusPollInterval OBJECT-TYPE
SYNTAX Integer32(30|60|90|120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The delay in seconds between 2 EOC full status requests to the same device in the shdsl span."
DEFVAL { 30 }
::= { oacSHDSLSpanConfProfileEntry 11 }
END