mibs/MIBS/pfsense/BEGEMOT-ATM

302 lines
8.8 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
--
-- Copyright (c) 2001-2002
-- Fraunhofer Institute for Open Communication Systems (FhG Fokus).
-- All rights reserved.
-- Copyright (c) 2004
-- Hartmut Brandt.
-- All rights reserved.
--
-- Author: Hartmut Brandt <harti@freebsd.org>
--
-- Redistribution and use in source and binary forms, with or without
-- modification, are permitted provided that the following conditions
-- are met:
-- 1. Redistributions of source code must retain the above copyright
-- notice, this list of conditions and the following disclaimer.
-- 2. Redistributions in binary form must reproduce the above copyright
-- notice, this list of conditions and the following disclaimer in the
-- documentation and/or other materials provided with the distribution.
--
-- THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-- ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-- ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
-- FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-- LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-- OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-- SUCH DAMAGE.
--
-- $Begemot: libunimsg/snmp_atm/BEGEMOT-ATM.txt,v 1.2 2004/08/06 14:50:26 brandt Exp $
--
-- Private Begemot MIB for ATM interfaces.
--
BEGEMOT-ATM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, TimeTicks
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString
FROM SNMPv2-TC
ifIndex
FROM IF-MIB
begemot
FROM BEGEMOT-MIB;
begemotAtm MODULE-IDENTITY
LAST-UPDATED "200407190000Z"
ORGANIZATION "German Aerospace Centre"
CONTACT-INFO
" Hartmut Brandt
Postal: German Aerospace Centre (DLR)
Institute of Communications and Navigation
82234 Wessling
Germany
Fax: +49 8153 28 2844
E-mail: harti@freebsd.org"
DESCRIPTION
"The Begemot MIB for ATM interfaces."
::= { begemot 101 }
begemotAtmObjects OBJECT IDENTIFIER ::= { begemotAtm 1 }
-- --------------------------------------------------------------------------
AtmESI ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1x:"
STATUS current
DESCRIPTION
"An ATM End System Identifier. This is basically the same as
an Ethernet Address and is assigned using the same rules."
SYNTAX OCTET STRING (SIZE(6))
-- --------------------------------------------------------------------------
--
-- Interfaces table
--
begemotAtmIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotAtmIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains an entry for each hardware ATM
interface. The table is indexed by the interface index."
::= { begemotAtmObjects 1 }
begemotAtmIfEntry OBJECT-TYPE
SYNTAX BegemotAtmIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table entry describing one ATM hardware interface."
INDEX { ifIndex }
::= { begemotAtmIfTable 1 }
BegemotAtmIfEntry ::= SEQUENCE {
begemotAtmIfName DisplayString,
begemotAtmIfPcr Unsigned32,
begemotAtmIfMedia INTEGER,
begemotAtmIfVpiBits Unsigned32,
begemotAtmIfVciBits Unsigned32,
begemotAtmIfMaxVpcs Unsigned32,
begemotAtmIfMaxVccs Unsigned32,
begemotAtmIfEsi AtmESI,
begemotAtmIfCarrierStatus INTEGER,
begemotAtmIfMode INTEGER
}
begemotAtmIfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(1..15))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the ATM interface."
::= { begemotAtmIfEntry 1 }
begemotAtmIfPcr OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The line cell rate of the interface."
::= { begemotAtmIfEntry 2 }
begemotAtmIfMedia OBJECT-TYPE
SYNTAX INTEGER {
other(1),
unknown(3),
utp25(4),
taxi100(5),
taxi140(6),
mm155(7),
sm155(8),
utp155(9),
mm622(10),
sm622(11),
virtual(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical medium."
::= { begemotAtmIfEntry 3 }
begemotAtmIfVpiBits OBJECT-TYPE
SYNTAX Unsigned32 (0..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of VPI bits that are used by the device."
::= { begemotAtmIfEntry 4 }
begemotAtmIfVciBits OBJECT-TYPE
SYNTAX Unsigned32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of VCI bits that are used by the device."
::= { begemotAtmIfEntry 5 }
begemotAtmIfMaxVpcs OBJECT-TYPE
SYNTAX Unsigned32 (0..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of VPC supported on this device. This may not
be larger than 2^begemotAtmIfVpiBits."
::= { begemotAtmIfEntry 6 }
begemotAtmIfMaxVccs OBJECT-TYPE
SYNTAX Unsigned32 (0..16777216)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of VCC supported on this device. This may not
be larger than 2^(begemotAtmIfVpiBits + begemotAtmVciBits)."
::= { begemotAtmIfEntry 7 }
begemotAtmIfEsi OBJECT-TYPE
SYNTAX AtmESI
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The default End System Identifier as reported by the hardware.
If the hardware has no ESI all six bytes are reported as 0."
::= { begemotAtmIfEntry 8 }
begemotAtmIfCarrierStatus OBJECT-TYPE
SYNTAX INTEGER { carrierOn(1), carrierOff(2), unknown(3), none(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the carrier. For interfaces which don't have the
notion of a carriere none is reported."
::= { begemotAtmIfEntry 9 }
begemotAtmIfMode OBJECT-TYPE
SYNTAX INTEGER { sonet(1), sdh(2), unknown(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The mode of the SUNI interface. For interfaces without SUNI
unknown is reported in which case the variable is read-only.
Some types of interfaces may not be able to change this value."
::= { begemotAtmIfEntry 10 }
begemotAtmIfTableLastChange OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime the last time that an entry in
begemotIfTable was created or destroyed. If the table is
unchanged since the last coldStart this value is zero."
::= { begemotAtmObjects 2 }
--
-- Interface hardware table
--
begemotAtmHWTable OBJECT-TYPE
SYNTAX SEQUENCE OF BegemotAtmHWEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table augments the begemotAtmIfTable and contains an entry
for each hardware ATM interface. The entries describe the
ATM hardware interface."
::= { begemotAtmObjects 3 }
begemotAtmHWEntry OBJECT-TYPE
SYNTAX BegemotAtmHWEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table entry describing one ATM hardware interface."
AUGMENTS { begemotAtmIfEntry }
::= { begemotAtmHWTable 1 }
BegemotAtmHWEntry ::= SEQUENCE {
begemotAtmHWVendor DisplayString,
begemotAtmHWDevice DisplayString,
begemotAtmHWSerial Unsigned32,
begemotAtmHWVersion Unsigned32,
begemotAtmHWSoftVersion Unsigned32
}
begemotAtmHWVendor OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A short string naming the vendor of the interface card."
::= { begemotAtmHWEntry 1 }
begemotAtmHWDevice OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A short string naming the brand of the interface card."
::= { begemotAtmHWEntry 2 }
begemotAtmHWSerial OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of the interface card or 0 if it doesn't
report a serial number."
::= { begemotAtmHWEntry 3 }
begemotAtmHWVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The hardware version of the interface card or 0 if it doesn't
report a hardware version number."
::= { begemotAtmHWEntry 4 }
begemotAtmHWSoftVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The firmware version of the interface card or 0 if it doesn't
report a firmware version number."
::= { begemotAtmHWEntry 5 }
-- --------------------------------------------------------------------
-- System specific parts
begemotAtmSysGroup OBJECT IDENTIFIER ::= { begemotAtmObjects 4 }
END