david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/quanta/fastpathlogging.my

805 lines
29 KiB
Plaintext
Raw Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
NETGEAR-LOGGING-MIB DEFINITIONS ::= BEGIN
-- Copyright Netgear Inc (2004-2007) All rights reserved.
-- This SNMP Management Information Specification
-- embodies Netgear Inc's confidential and proprietary
-- intellectual property. Netgear Inc retains all title
-- and ownership in the Specification including any revisions.
-- This Specification is supplied "AS IS", Netgear Inc
-- makes no warranty, either expressed or implied,
-- as to the use, operation, condition, or performance of the
-- Specification.
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, Gauge32,
Unsigned32, TimeTicks, NOTIFICATION-TYPE FROM SNMPv2-SMI
TEXTUAL-CONVENTION, DisplayString,
DateAndTime, RowStatus FROM SNMPv2-TC
lb6m FROM QUANTA-LB6M-REF-MIB
InetAddress, InetAddressType, InetPortNumber FROM INET-ADDRESS-MIB
agentInventoryComponentIndex FROM NETGEAR-INVENTORY-MIB
InterfaceIndexOrZero FROM IF-MIB;
AgentLogFacility ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Facility code used in determining the SysLog Priority value."
REFERENCE
"RFC3164 - 4.1.1: Table 1"
SYNTAX INTEGER {
kernel(0), -- kernel messages
user(1), -- user-level messages
mail(2), -- mail system
system(3), -- system daemons
security(4), -- security/authorization messages
syslog(5), -- messages generated internally by syslogd
lpr(6), -- line printer subsystem
nntp(7), -- network news subsystem
uucp(8), -- UUCP subsystem
cron(9), -- clock daemon
auth (10), -- security/authorization messages
ftp(11), -- FTP daemon
ntp(12), -- NTP subsystem
audit(13), -- log audit
alert(14), -- log alert
clock(15), -- clock daemon
local0(16), -- local use 0
local1(17), -- local use 1
local2(18), -- local use 2
local3(19), -- local use 3
local4(20), -- local use 4
local5(21), -- local use 5
local6(22), -- local use 6
local7(23) -- local use 7
}
AgentLogSeverity ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Severity code used in determining the SysLog Priority value."
REFERENCE
"RFC3164 - 4.1.1: Table 2"
SYNTAX INTEGER {
emergency(0), -- System is unusable. System failure has occurred.
alert(1), -- Action must be taken immediately. Unrecoverable
-- failure of a component. System failure likely.
critical(2), -- Critical conditions. Recoverable failure of a
-- component that may lead to system failure.
error(3), -- Error conditions. Recoverable failure of a component.
warning(4), -- Warning conditions. Minor failure, e.g.
-- misconfiguration of a component.
notice(5), -- Normal but significant conditions.
informational(6), -- Informational messages.
debug(7) -- Debug-level messages.
}
fastPathLogging MODULE-IDENTITY
LAST-UPDATED "201101260000Z" -- 26 Jan 2011 12:00:00 GMT
ORGANIZATION "Netgear Inc"
CONTACT-INFO ""
DESCRIPTION
"This MIB provides objects to configure and display events logged
on this system."
-- Revision history.
REVISION
"201101260000Z" -- 26 Jan 2011 12:00:00 GMT
DESCRIPTION
"Postal address updated."
REVISION
"200705230000Z" -- 23 May 2007 12:00:00 GMT
DESCRIPTION
"Netgear branding related changes."
REVISION
"200410261303Z" -- Tue Oct 23 13:03:07 2004 GMT
DESCRIPTION
"Initial version."
::= { lb6m 14 }
--**************************************************************************************
-- agentLogConfigGroup
--
--**************************************************************************************
agentLogConfigGroup OBJECT IDENTIFIER ::= { fastPathLogging 1 }
--**************************************************************************************
-- agentLogInMemoryConfigGroup
--
--**************************************************************************************
agentLogInMemoryConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 1 }
agentLogInMemoryAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable/disable the In Memory log."
::= { agentLogInMemoryConfigGroup 1 }
agentLogInMemoryBehavior OBJECT-TYPE
SYNTAX INTEGER {
wrap(1),
stop-on-full(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configures the behavior of the In Memory Log when it becomes full. A value of
wrap(1) will cause the oldest log message to be removed, making room for the new
message. A value of stop-on-full(2) will prevent any further logging."
::= { agentLogInMemoryConfigGroup 4 }
--**************************************************************************************
-- agentLogConsoleConfigGroup
--
--**************************************************************************************
agentLogConsoleConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 2 }
agentLogConsoleAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Admin mode for console logs"
::= { agentLogConsoleConfigGroup 1 }
agentLogConsoleSeverityFilter OBJECT-TYPE
SYNTAX AgentLogSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Severity filter for console logs"
::= { agentLogConsoleConfigGroup 2 }
--**************************************************************************************
-- agentLogSysLogConfigGroup
--
--**************************************************************************************
agentLogSysLogConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 4 }
agentLogSyslogAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For Enabling and Disabling logging to configured syslog hosts. Setting this to disable
stops logging to all syslog hosts."
::= { agentLogSysLogConfigGroup 1 }
agentLogSyslogLocalPort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the port on the local host from which syslog messages are sent."
::= { agentLogSysLogConfigGroup 3 }
agentLogSyslogMaxHosts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of hosts that can be configured for logging syslog messages."
::= { agentLogSysLogConfigGroup 4 }
--**************************************************************************************
-- agentLogCliCommandsConfigGroup
--
--**************************************************************************************
agentLogCliCommandsConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 5 }
agentLogCliCommandsAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable/disable the logging of the CLI Commands "
::= { agentLogCliCommandsConfigGroup 1 }
--**************************************************************************************
-- agentLogWebConfigGroup
--
--**************************************************************************************
agentLogWebConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 7 }
agentLogWebAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable/disable the logging of the Web "
::= { agentLogWebConfigGroup 1 }
--**************************************************************************************
-- agentLogSnmpConfigGroup
--
--**************************************************************************************
agentLogSnmpConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 8 }
agentLogSnmpAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable/disable the logging of the Snmp "
::= { agentLogSnmpConfigGroup 1 }
--**************************************************************************************
-- agentLogAuditConfigGroup
--
--**************************************************************************************
agentLogAuditConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 9 }
agentLogAuditAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administratively enable/disable Switch Auditing "
::= { agentLogAuditConfigGroup 1 }
--**************************************************************************************
-- agentLogSyslogHostTable
--
--**************************************************************************************
agentLogSyslogHostTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentLogSyslogHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Syslog host table containing syslog host entries."
::= { agentLogSysLogConfigGroup 5 }
agentLogSyslogHostEntry OBJECT-TYPE
SYNTAX AgentLogSyslogHostEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Syslog Host entry attributes."
INDEX { agentLogHostTableIndex }
::= { agentLogSyslogHostTable 1 }
AgentLogSyslogHostEntry ::=
SEQUENCE {
agentLogHostTableIndex
Unsigned32,
agentLogHostTableIpAddress
InetAddress,
agentLogHostTableIpAddressType
InetAddressType,
agentLogHostTablePort
Unsigned32,
agentLogHostTableSeverityFilter
AgentLogSeverity,
agentLogHostTableRowStatus
RowStatus
}
agentLogHostTableIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index to syslog host entry in syslog host table."
::= { agentLogSyslogHostEntry 1 }
agentLogHostTableIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Syslog Host table IP Address Type."
::= { agentLogSyslogHostEntry 2 }
agentLogHostTableIpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Syslog Host table IP Address. Set operation of this object can be successful
only when the valid IpAddressType (Ipv4, Ipv6 or DNS) is configured and the
address specified is valid for that Address type."
::= { agentLogSyslogHostEntry 3 }
agentLogHostTablePort OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Syslog Host table port number."
::= { agentLogSyslogHostEntry 4 }
agentLogHostTableSeverityFilter OBJECT-TYPE
SYNTAX AgentLogSeverity
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configures the minimum severity that will be stored in the In Memory log."
::= { agentLogSyslogHostEntry 5 }
agentLogHostTableRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Syslog Host table row status"
::= { agentLogSyslogHostEntry 7 }
--**************************************************************************************
-- agentLogSyslogSourceInterface
--
--**************************************************************************************
agentLogSyslogSourceInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A source-interface selection on an Interface Index (like vlan based
routing interface, port based routing interface, loopback interface,
tunnel interface). A non-zero value indicates ifIndex for the
corresponding interface entry in the ifTable is selected.
A zero value indicates the source-interface un-selection."
::= { agentLogSysLogConfigGroup 6 }
--**************************************************************************************
-- agentLogStatisticsGroup
--
--**************************************************************************************
agentLogStatisticsGroup OBJECT IDENTIFIER ::= { fastPathLogging 2 }
agentLogMessagesReceived OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of messages received by the log process. This includes messages that are
dropped or ignored."
::= { agentLogStatisticsGroup 1 }
agentLogMessagesDropped OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of messages that could not be processed due to error or lack of resources."
::= { agentLogStatisticsGroup 2 }
agentLogSyslogMessagesRelayed OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of messages forwarded by the syslog function to a syslog host. Messages forwarded
to multiple hosts are counted once for each host."
::= { agentLogStatisticsGroup 3 }
agentLogSyslogMessagesIgnored OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The number of messages that were not processed by the syslog process because the component name
or the priority level did not match any specification."
::= { agentLogStatisticsGroup 4 }
agentLogMessageReceivedTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local time when a message was last received by the log subsystem specified as the number of
non-leap seconds since 00:00:00 UTC on January 1 1970."
::= { agentLogStatisticsGroup 5 }
agentLogSyslogMessageDeliveredTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local time when a message was last delivered to a syslog host specified as the number of non-leap
seconds since 00:00:00 UTC on January 1 1970."
::= { agentLogStatisticsGroup 6 }
--**************************************************************************************
-- agentLogemailAlertConfigGroup
--
--**************************************************************************************
agentLogEmailAlertConfigGroup OBJECT IDENTIFIER ::= { agentLogConfigGroup 6 }
agentLogEmailAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For Enabling and Disabling email alerts to SMTP server. Setting this to disable
stops emailing to SMTP servers."
::= { agentLogEmailAlertConfigGroup 1 }
agentLogEmailfromAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Email from Address"
::= { agentLogEmailAlertConfigGroup 2 }
agentLogEmaillogDuration OBJECT-TYPE
SYNTAX Unsigned32(30..1440)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This duration in minutes determines how frequently the non critical messages are sent to the SMTP server."
::= { agentLogEmailAlertConfigGroup 3 }
agentLogEmailUrgentSeverity OBJECT-TYPE
SYNTAX AgentLogSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the severity level for the critical log messages"
::= { agentLogEmailAlertConfigGroup 4 }
agentLogEmailNonUrgentSeverity OBJECT-TYPE
SYNTAX AgentLogSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the severity level for the non critical log messages."
::= { agentLogEmailAlertConfigGroup 5 }
agentLogEmailTrapsSeverity OBJECT-TYPE
SYNTAX AgentLogSeverity
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the severity level for Trap messages."
::= { agentLogEmailAlertConfigGroup 6 }
agentLogEmailToAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentLogEmailToAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the destination email address and the message type."
::= { agentLogEmailAlertConfigGroup 7 }
agentLogEmailToAddrEntry OBJECT-TYPE
SYNTAX AgentLogEmailToAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the agentLogEmailtoAddrTable. This entry shows what kind of messages go to the given destination email addresses."
INDEX { agentLogEmailToAddrMessageType, agentLogEmailToAddr}
::= { agentLogEmailToAddrTable 1 }
AgentLogEmailToAddrEntry ::= SEQUENCE {
agentLogEmailToAddrMessageType INTEGER,
agentLogEmailToAddr DisplayString,
agentLogEmailToAddrEntryStatus RowStatus
}
agentLogEmailToAddrMessageType OBJECT-TYPE
SYNTAX INTEGER { critical(1), non-critical(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Log message Type"
::= { agentLogEmailToAddrEntry 1 }
agentLogEmailToAddr OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Email Sender Address"
::= { agentLogEmailToAddrEntry 2 }
agentLogEmailToAddrEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is to create or delete the entry"
::= { agentLogEmailToAddrEntry 3 }
agentLogEmailSubjectTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentLogEmailSubjectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the subject of the email and the message type."
::= { agentLogEmailAlertConfigGroup 8 }
agentLogEmailSubjectEntry OBJECT-TYPE
SYNTAX AgentLogEmailSubjectEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the agentLogEmailtoAddrTable. This entry shows what kind of subject to be used for the given message type."
INDEX { agentLogEmailSubjectMessageType}
::= { agentLogEmailSubjectTable 1 }
AgentLogEmailSubjectEntry ::= SEQUENCE {
agentLogEmailSubjectMessageType INTEGER,
agentLogEmailSubject DisplayString,
agentLogEmailSubjectEntryStatus RowStatus
}
agentLogEmailSubjectMessageType OBJECT-TYPE
SYNTAX INTEGER { critical(1), non-critical(2)}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Log message Type"
::= { agentLogEmailSubjectEntry 1 }
agentLogEmailSubject OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Email Subject. When this object is set to empty-string, it resets to
factory default string."
::= { agentLogEmailSubjectEntry 2}
agentLogEmailSubjectEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is to create or delete the entry"
::= { agentLogEmailSubjectEntry 3 }
agentLogEmailMailServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentLogEmailMailServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the mail servers"
::= { agentLogEmailAlertConfigGroup 9 }
agentLogEmailMailServerEntry OBJECT-TYPE
SYNTAX AgentLogEmailMailServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the agentLogEmailMailServerTable. This entry shows the conmfiguration for mail server."
INDEX { agentLogEmailSmtpAddrType, agentLogEmailSmtpAddr }
::= { agentLogEmailMailServerTable 1 }
AgentLogEmailMailServerEntry ::= SEQUENCE {
agentLogEmailSmtpAddrType InetAddressType,
agentLogEmailSmtpAddr InetAddress,
agentLogEmailSmtpPort InetPortNumber,
agentLogEmailSecurity INTEGER,
agentLogEmailloginID DisplayString,
agentLogEmailPassword DisplayString,
agentLogEmailEntryStatus RowStatus
}
agentLogEmailSmtpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Email SMTP Address type"
::= { agentLogEmailMailServerEntry 1 }
agentLogEmailSmtpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SMTP server Address"
::= { agentLogEmailMailServerEntry 2 }
agentLogEmailSmtpPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SMTP Port number. When this object is set to 0, it resets to
factory default port number."
::= { agentLogEmailMailServerEntry 3 }
agentLogEmailSecurity OBJECT-TYPE
SYNTAX INTEGER { none(1), tlsv1(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the authentication mechanism that should be used."
::= { agentLogEmailMailServerEntry 4 }
agentLogEmailloginID OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This user id is used while the switch/router is being authenticated by the SMTP server.The user ID
should be minimum of 1 charcter to maximum of 16 characters."
::= { agentLogEmailMailServerEntry 5 }
agentLogEmailPassword OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This password is used while the switch/router is being authenticated by the SMTP server.The password
should be minimum of 1 character to maximum of 16 characters."
::= { agentLogEmailMailServerEntry 6 }
agentLogEmailEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is to create or delete the entry"
::= { agentLogEmailMailServerEntry 7 }
agentLogEmailAlertStatsGroup OBJECT IDENTIFIER ::= { agentLogStatisticsGroup 7}
agentLogEmailStatsemailsSentCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the count to show the no of emails sent so far."
::= { agentLogEmailAlertStatsGroup 1 }
agentLogEmailStatsemailsFailureCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the count to show the no of emails failures happened so far..."
::= { agentLogEmailAlertStatsGroup 2 }
agentLogEmailStatsTimeSinceLastEmailSent OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of seconds since the last email was sent."
::= { agentLogEmailAlertStatsGroup 3}
agentLogEmailStatsClear OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is to clear the email alert stats."
::= { agentLogEmailAlertStatsGroup 4}
--**************************************************************************************
-- agentLogInMemoryGroup
--
--**************************************************************************************
agentLogInMemoryGroup OBJECT IDENTIFIER ::= { fastPathLogging 3 }
agentLogInMemoryLogCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of valid entries in the in-memory log."
::= { agentLogInMemoryGroup 1 }
--**************************************************************************************
-- agentLogInMemoryTable
--
--**************************************************************************************
agentLogInMemoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF AgentLogInMemoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The in-memory log table containing sequence of in-memory log entries."
::= { agentLogInMemoryGroup 2 }
agentLogInMemoryEntry OBJECT-TYPE
SYNTAX AgentLogInMemoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An individual message entry in in-memory log table."
INDEX { agentLogInMemoryMsgIndex }
::= { agentLogInMemoryTable 1 }
AgentLogInMemoryEntry ::=
SEQUENCE {
agentLogInMemoryMsgIndex
Unsigned32,
agentLogInMemoryMsgText
DisplayString
}
agentLogInMemoryMsgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to message entry in the in-memory log table."
::= { agentLogInMemoryEntry 1 }
agentLogInMemoryMsgText OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Message text info for inmemory logged messages."
::= { agentLogInMemoryEntry 2 }
--**************************************************************************************
-- agentLogTrapsGroup
--
--**************************************************************************************
agentLogTrapsGroup OBJECT IDENTIFIER ::= { fastPathLogging 5 }
agentLogEmailAlertTrapsGroup OBJECT IDENTIFIER ::= { agentLogTrapsGroup 1}
agentLogEmailSendFailed NOTIFICATION-TYPE
OBJECTS {
agentLogEmailStatsemailsFailureCount -- No of emails Failed
}
STATUS current
DESCRIPTION
"When ever a mail sending to the SMTP server is failed, this trap is sent with a count of how many times the connection to the SMTP server is failed so far."
::= { agentLogEmailAlertTrapsGroup 1 }
END
Reference in New Issue Copy Permalink