mibs/MIBS/ruckus/RUCKUS-ZD-WLAN-CONFIG-MIB

755 lines
24 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
--
-- Copyright 2010-2013 Ruckus Wireless, Inc. All rights reserved.
--
-- RUCKUS WIRELESS, INC. CONFIDENTIAL -
-- This is an unpublished, proprietary work of Ruckus Wireless, Inc., and is
-- fully protected under copyright and trade secret laws. You may not view,
-- use, disclose, copy, or distribute this file or any information contained
-- herein except pursuant to a valid license from Ruckus.
--
RUCKUS-ZD-WLAN-CONFIG-MIB DEFINITIONS ::= BEGIN
IMPORTS
ruckusZDWLANModule
FROM RUCKUS-ROOT-MIB
DisplayString,
MacAddress,
RowStatus,
TruthValue
FROM SNMPv2-TC
OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex,
InterfaceIndex
FROM IF-MIB
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Integer32,
Unsigned32,
IpAddress
FROM SNMPv2-SMI;
ruckusZDWLANConfigMIB MODULE-IDENTITY
LAST-UPDATED "201010150800Z"
ORGANIZATION "Ruckus Wireless, Inc."
CONTACT-INFO
"Ruckus Wireless, Inc.
Postal:
350 West Java Dr.
Sunnyvale, CA 94089
USA
EMail: support@ruckuswireless.com
Phone: +1-650-265-4200"
DESCRIPTION
"Ruckus ZD WLAN Configuration mib"
::= { ruckusZDWLANModule 2 }
ruckusZDWLANConfigObjects OBJECT IDENTIFIER ::= { ruckusZDWLANConfigMIB 1 }
ruckusZDWLANConfig OBJECT IDENTIFIER ::= { ruckusZDWLANConfigObjects 1 }
ruckusZDWLANConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDWLANConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD WLAN table."
::= { ruckusZDWLANConfig 1 }
ruckusZDWLANConfigEntry OBJECT-TYPE
SYNTAX RuckusZDWLANConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD WLAN configuration entry."
INDEX {
ruckusZDWLANID }
::= { ruckusZDWLANConfigTable 1 }
RuckusZDWLANConfigEntry ::= SEQUENCE {
ruckusZDWLANID INTEGER,
ruckusZDWLANConfigSSID OCTET STRING,
ruckusZDWLANConfigDescription DisplayString,
ruckusZDWLANConfigName OCTET STRING,
ruckusZDWLANConfigWLANServiceType INTEGER,
ruckusZDWLANConfigAuthentication INTEGER,
ruckusZDWLANConfigEncryption INTEGER,
ruckusZDWLANConfigWEPKeyIndex INTEGER,
ruckusZDWLANConfigWEPKey OCTET STRING,
ruckusZDWLANConfigWPACipherType INTEGER,
ruckusZDWLANConfigWPAKey OCTET STRING,
ruckusZDWLANConfigAuthenticationServerID INTEGER,
ruckusZDWLANConfigWirelessClientIsolation INTEGER,
ruckusZDWLANConfigWirelessWhiteListID INTEGER,
ruckusZDWLANConfigZeroITActivation INTEGER,
ruckusZDWLANConfigWLANHotspotID INTEGER,
ruckusZDWLANConfigWLANServicePriority INTEGER,
ruckusZDWLANConfigAccountingServerID INTEGER,
ruckusZDWLANConfigAccountingUpdateInterval INTEGER,
ruckusZDWLANConfigUplinkRate OCTET STRING,
ruckusZDWLANConfigDownlinkRate OCTET STRING,
ruckusZDWLANConfigIGMPSnooping INTEGER,
ruckusZDWLANConfigVlanID INTEGER,
ruckusZDWLANConfigDynamicVLAN INTEGER,
ruckusZDWLANConfigHideSSID TruthValue,
ruckusZDWLANConfigTunnelMode TruthValue,
ruckusZDWLANConfigBackgroundScanning TruthValue,
ruckusZDWLANConfigMaxClients INTEGER,
ruckusZDWLANConfigWebAuthentication INTEGER,
ruckusZDWLANConfigRowStatus RowStatus
}
ruckusZDWLANID OBJECT-TYPE
SYNTAX INTEGER (1..2048)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"this Wireless LAN(WLAN) ID.Max value:for zd1000 zd1100,128;for zd3000,1024;for
zd5000,2048"
::= { ruckusZDWLANConfigEntry 1 }
ruckusZDWLANConfigSSID OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"SSID for this Wireless LAN. It can't be modified after creating it."
::= { ruckusZDWLANConfigEntry 2 }
ruckusZDWLANConfigDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description for this Wireless LAN."
::= { ruckusZDWLANConfigEntry 3 }
ruckusZDWLANConfigName OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name for this Wireless LAN"
::= { ruckusZDWLANConfigEntry 4 }
ruckusZDWLANConfigWLANServiceType OBJECT-TYPE
SYNTAX INTEGER {
standardUsage(1),
guestAccess(2),
hotSpotService(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select The the Service type for the Wireless LAN.
for hotSpotService,only read-only"
DEFVAL {standardUsage}
::= { ruckusZDWLANConfigEntry 8 }
ruckusZDWLANConfigAuthentication OBJECT-TYPE
SYNTAX INTEGER {
open(1),
shared(2),
eap(3),
mac-address(4),
eap-mac-mix(5) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Authentication method choosen for this Wireless LAN."
DEFVAL {open}
::= { ruckusZDWLANConfigEntry 10 }
ruckusZDWLANConfigEncryption OBJECT-TYPE
SYNTAX INTEGER {
wpa(1),
wpa2(2),
wpa-Mixed(3),
wep-64(4),
wep-128(5),
none-enc(6) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Encryption method choosen for this Wireless LAN."
DEFVAL {none-enc}
::= { ruckusZDWLANConfigEntry 12 }
ruckusZDWLANConfigWEPKeyIndex OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select the WEP key index for the WEP encryption."
DEFVAL {1}
::= { ruckusZDWLANConfigEntry 15 }
ruckusZDWLANConfigWEPKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (10 | 26))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enter the Pass-phrase for the WEP encryption method.
Only 10 or 26 Hex character.such as: 1122334455"
::= { ruckusZDWLANConfigEntry 16 }
ruckusZDWLANConfigWPACipherType OBJECT-TYPE
SYNTAX INTEGER {
tkip(1),
aes(2),
auto(3),
none(0) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enter the encryption cipher method for the WPA encryption."
DEFVAL {none}
::= { ruckusZDWLANConfigEntry 20 }
ruckusZDWLANConfigWPAKey OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8..63 | 64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enter the Pass-phrase for the WPA encryption.
Specifies the WPA PSK (Wi-Fi Protected Access
Pre Shared key)
If the key length is 64 then all 64 characters should be in hex,
otherwise the key assumed to be ascii."
::= { ruckusZDWLANConfigEntry 21 }
ruckusZDWLANConfigAuthenticationServerID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select the Authentication Server by the registered Server ID.
This server id must exist in table: ruckusZDAAAConfigTable(aaa-authentication) or local."
::= { ruckusZDWLANConfigEntry 25 }
ruckusZDWLANConfigWirelessClientIsolation OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet."
DEFVAL{2}
::= { ruckusZDWLANConfigEntry 28 }
ruckusZDWLANConfigWirelessWhiteListID OBJECT-TYPE
SYNTAX INTEGER (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"make sure client isolation is enabled and then choose one id."
DEFVAL{none}
::= { ruckusZDWLANConfigEntry 29 }
ruckusZDWLANConfigZeroITActivation OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Zero IT Activation Service of the Wireless LAN or not."
DEFVAL{disable}
::= { ruckusZDWLANConfigEntry 30 }
ruckusZDWLANConfigWLANHotspotID OBJECT-TYPE
SYNTAX INTEGER (0..32)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select the Hotspot Server for the Wireless LAN.
0, no hotspot server;
1-32,hotspot server must exist."
::= { ruckusZDWLANConfigEntry 31 }
ruckusZDWLANConfigWLANServicePriority OBJECT-TYPE
SYNTAX INTEGER {
high(1),
low(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select the QOS service priority for the Wireless LAN."
DEFVAL{high}
::= { ruckusZDWLANConfigEntry 32 }
ruckusZDWLANConfigAccountingServerID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select the (RADIUS) Accounting Server by the registered Server ID.
0,disable;
This server id must exist in table: ruckusZDAAAConfigTable(aaa-accounting)"
DEFVAL{0}
::= { ruckusZDWLANConfigEntry 35 }
ruckusZDWLANConfigAccountingUpdateInterval OBJECT-TYPE
SYNTAX INTEGER (1..60)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enter interval in minutes to update Accounting Server."
::= { ruckusZDWLANConfigEntry 36 }
ruckusZDWLANConfigUplinkRate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable or Set the Speed/Rate limiting of uplink. Valid range is 0.10mbps or between 0.25mbps~20.00mbps in 0.25mbps step.
Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',...,'19.75mbps','20.00mbps'"
DEFVAL{"disable"}
::= { ruckusZDWLANConfigEntry 40 }
ruckusZDWLANConfigDownlinkRate OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..10))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Disable or Set the Speed/Rate limiting of downlink. Valid range is 0.10mbps or between 0.25mbps~20.00mbps in 0.25mbps step.
Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',...,'19.75mbps','20.00mbps'"
DEFVAL{"disable"}
::= { ruckusZDWLANConfigEntry 41 }
ruckusZDWLANConfigIGMPSnooping OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IGMP Snooping state of the WLAN."
::= { ruckusZDWLANConfigEntry 42 }
ruckusZDWLANConfigVlanID OBJECT-TYPE
SYNTAX INTEGER ( 1..4094 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged."
DEFVAL{1}
::= { ruckusZDWLANConfigEntry 45 }
ruckusZDWLANConfigDynamicVLAN OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Service of the dynamic Wireless LAN or not.
For 802.1x EAP + MAC Address model,'set' is not supported."
DEFVAL{disable}
::= { ruckusZDWLANConfigEntry 46 }
ruckusZDWLANConfigHideSSID OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Hide SSID, not to broadcast it SSID."
DEFVAL{false}
::= { ruckusZDWLANConfigEntry 50 }
ruckusZDWLANConfigTunnelMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable Tunnel support capability for the Wireless LAN."
DEFVAL{false}
::= { ruckusZDWLANConfigEntry 52 }
ruckusZDWLANConfigBackgroundScanning OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select Background Scanning support capability for the Wireless LAN."
DEFVAL{false}
::= { ruckusZDWLANConfigEntry 53 }
ruckusZDWLANConfigMaxClients OBJECT-TYPE
SYNTAX INTEGER (1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select the Number of client devices the AP can service for the Wireless LAN."
DEFVAL{100}
::= { ruckusZDWLANConfigEntry 55 }
ruckusZDWLANConfigWebAuthentication OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable the Wep Authentication or not."
DEFVAL{disable}
::= { ruckusZDWLANConfigEntry 60 }
ruckusZDWLANConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create, Delete Administration control for this Wireless LAN.
1,ACTIVE state,only for read;
4,CREATEANDGO, create a new table;
6,DESTROY, delete a existing table."
::= { ruckusZDWLANConfigEntry 63 }
ruckusZDWLANGroupConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDWLANGroupConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD WLAN Group table."
::= { ruckusZDWLANConfig 2 }
ruckusZDWLANGroupConfigEntry OBJECT-TYPE
SYNTAX RuckusZDWLANGroupConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD WLAN Group configuration entry."
INDEX {
ruckusZDWLANGroupID }
::= { ruckusZDWLANGroupConfigTable 1 }
RuckusZDWLANGroupConfigEntry ::= SEQUENCE {
ruckusZDWLANGroupID INTEGER,
ruckusZDWLANGroupConfigName DisplayString,
ruckusZDWLANGroupConfigDescription DisplayString,
ruckusZDWLANGroupVlanOverrideStatus TruthValue,
ruckusZDWLANGroupConfigRowStatus RowStatus
}
ruckusZDWLANGroupID OBJECT-TYPE
SYNTAX INTEGER (1..2048)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WLAN Group ID. It can't be modified after creating it.
Max value:for zd1000 zd1100,128;for zd3000,1024;for zd5000,2048"
::= { ruckusZDWLANGroupConfigEntry 1 }
ruckusZDWLANGroupConfigName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name for this Wireless LAN Group"
::= { ruckusZDWLANGroupConfigEntry 5 }
ruckusZDWLANGroupConfigDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description for this Wireless LAN Group."
::= { ruckusZDWLANGroupConfigEntry 6 }
ruckusZDWLANGroupVlanOverrideStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enable Vlan Override for the Wireless LAN Group."
::= { ruckusZDWLANGroupConfigEntry 8 }
ruckusZDWLANGroupConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create, Delete Administration control for this Wireless LAN Group.
1,ACTIVE state,only for read;
4,CREATEANDGO, create a new table;
6,DESTROY, delete a existing table."
::= { ruckusZDWLANGroupConfigEntry 15 }
ruckusZDWLANGroupCfgAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDWLANGroupCfgAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD WLAN table in WLAN group."
::= { ruckusZDWLANConfig 3 }
ruckusZDWLANGroupCfgAttrEntry OBJECT-TYPE
SYNTAX RuckusZDWLANGroupCfgAttrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD WLAN configuration entry."
INDEX {
ruckusZDWLANGroupID,
ruckusZDWLANID }
::= { ruckusZDWLANGroupCfgAttrTable 1 }
RuckusZDWLANGroupCfgAttrEntry ::= SEQUENCE {
ruckusZDWLANGroupCfgAttrOverrideType INTEGER,
ruckusZDWLANGroupCfgAttrWGVlanTag INTEGER,
ruckusZDWLANGroupCfgAttrRowStatus RowStatus
}
ruckusZDWLANGroupCfgAttrOverrideType OBJECT-TYPE
SYNTAX INTEGER { nochange(1), tag(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WLAN group vlan Override Type."
DEFVAL { nochange }
::= { ruckusZDWLANGroupCfgAttrEntry 3 }
ruckusZDWLANGroupCfgAttrWGVlanTag OBJECT-TYPE
SYNTAX INTEGER (1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"WLAN group vlan tag.
for set , range is :1-4094.
for get , range is :0-4094:
1: If VLAN ID is 1, packets from this WLAN will be untagged;
0: for node ruckusZDWLANGroupCfgAttrOverrideType is nochange"
DEFVAL { 2 }
::= { ruckusZDWLANGroupCfgAttrEntry 4 }
ruckusZDWLANGroupCfgAttrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create, Delete Administration control for this Wireless LAN group attr.
1,ACTIVE state,only for read;
4,CREATEANDGO, create a new table;
6,DESTROY, delete a existing table."
::= { ruckusZDWLANGroupCfgAttrEntry 10 }
-- add hotspot table basicly for KT
ruckusZDHotspotConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDHotspotConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD Hotspot table."
::= { ruckusZDWLANConfig 8 }
ruckusZDHotspotConfigEntry OBJECT-TYPE
SYNTAX RuckusZDHotspotConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD Hotspot configuration entry."
INDEX {
ruckusZDHotspotID }
::= { ruckusZDHotspotConfigTable 1 }
RuckusZDHotspotConfigEntry ::= SEQUENCE {
ruckusZDHotspotID INTEGER,
ruckusZDHotspotName DisplayString,
ruckusZDHotspotRedirectLoginPage DisplayString,
ruckusZDHotspotRedirectStartURL DisplayString,
ruckusZDHotspotRedirectType INTEGER,
ruckusZDHotspotRowStatus RowStatus
}
ruckusZDHotspotID OBJECT-TYPE
SYNTAX INTEGER (1..32)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Hotspot ID."
::= { ruckusZDHotspotConfigEntry 1 }
ruckusZDHotspotName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name for this Hotspot.Can't be modified if created."
::= { ruckusZDHotspotConfigEntry 2 }
ruckusZDHotspotRedirectLoginPage OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Redirect unauthenticated user to this for authentication. It is URL or IPaddress."
::= { ruckusZDHotspotConfigEntry 3 }
ruckusZDHotspotRedirectStartURL OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"After user is authenticated, redirect to this URL if the redirect type is url."
::= { ruckusZDHotspotConfigEntry 4 }
ruckusZDHotspotRedirectType OBJECT-TYPE
SYNTAX INTEGER { user(1), url(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To decide the redirect target. If it is user, redirect to the user intends to visit."
::= { ruckusZDHotspotConfigEntry 6 }
ruckusZDHotspotRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create, Delete Administration control for this Hotspot."
::= { ruckusZDHotspotConfigEntry 15 }
ruckusZDClientIsolationWhiteListTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDClientIsolationWhiteListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD Client Isolation White List table."
::= { ruckusZDWLANConfig 15 }
ruckusZDClientIsolationWhiteListEntry OBJECT-TYPE
SYNTAX RuckusZDClientIsolationWhiteListEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD Client Isolation White List entry."
INDEX { ruckusZDClientIsolationWhiteListID }
::= { ruckusZDClientIsolationWhiteListTable 1 }
RuckusZDClientIsolationWhiteListEntry ::= SEQUENCE {
ruckusZDClientIsolationWhiteListID INTEGER,
ruckusZDClientIsolationWhiteListName DisplayString,
ruckusZDClientIsolationWhiteListDescription DisplayString,
ruckusZDClientIsolationWhiteListRowStatus RowStatus
}
ruckusZDClientIsolationWhiteListID OBJECT-TYPE
SYNTAX INTEGER (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Client Isolation White List ID. It can't be modified after creating it."
::= { ruckusZDClientIsolationWhiteListEntry 1 }
ruckusZDClientIsolationWhiteListName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Name for this Client Isolation White List."
::= { ruckusZDClientIsolationWhiteListEntry 5 }
ruckusZDClientIsolationWhiteListDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description for this Client Isolation White List."
::= { ruckusZDClientIsolationWhiteListEntry 6 }
ruckusZDClientIsolationWhiteListRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create, Delete Administration control for this Client Isolation White List.
1,ACTIVE state,only for read;
4,CREATEANDGO, create a new table;
6,DESTROY, delete a existing table."
::= { ruckusZDClientIsolationWhiteListEntry 15 }
ruckusZDClientIsolationWhiteListRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF RuckusZDClientIsolationWhiteListRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"ZD Client Isolation White List Attribute in Client Isolation White
List table."
::= { ruckusZDWLANConfig 16 }
ruckusZDClientIsolationWhiteListRuleEntry OBJECT-TYPE
SYNTAX RuckusZDClientIsolationWhiteListRuleEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each ZD Client Isolation White List entry."
INDEX { ruckusZDClientIsolationWhiteListID,
ruckusZDClientIsolationWhiteListRuleID }
::= { ruckusZDClientIsolationWhiteListRuleTable 1 }
RuckusZDClientIsolationWhiteListRuleEntry ::= SEQUENCE {
ruckusZDClientIsolationWhiteListRuleID INTEGER,
ruckusZDClientIsolationWhiteListRuleDescription DisplayString,
ruckusZDClientIsolationWhiteListRuleMac DisplayString,
ruckusZDClientIsolationWhiteListRuleDesAddr DisplayString,
ruckusZDClientIsolationWhiteListRuleRowStatus RowStatus
}
ruckusZDClientIsolationWhiteListRuleID OBJECT-TYPE
SYNTAX INTEGER (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"WLAN Client Isolation White List Rule ID."
::= { ruckusZDClientIsolationWhiteListRuleEntry 1 }
ruckusZDClientIsolationWhiteListRuleDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description for this Client Isolation White List Rule."
::= { ruckusZDClientIsolationWhiteListRuleEntry 3 }
ruckusZDClientIsolationWhiteListRuleMac OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..46))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"MAC Address"
::= { ruckusZDClientIsolationWhiteListRuleEntry 5 }
ruckusZDClientIsolationWhiteListRuleDesAddr OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..46))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP Address"
::= { ruckusZDClientIsolationWhiteListRuleEntry 6 }
ruckusZDClientIsolationWhiteListRuleRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Create, Delete Administration control for this Wireless LAN group attr.
1,ACTIVE state,only for read;
4,CREATEANDGO, create a new table;
6,DESTROY, delete a existing table."
::= { ruckusZDClientIsolationWhiteListRuleEntry 10 }
END