mibs/MIBS/screenos/NETSCREEN-INTERFACE-MIB

697 lines
19 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
-- This module defines enterprise MIBs for interface configuration
--
-- Copyright (c) 1999-2004, Juniper Networks, Inc.
-- All rights reserved.
NETSCREEN-INTERFACE-MIB DEFINITIONS ::= BEGIN
IMPORTS
netscreenInterface
FROM NETSCREEN-SMI
Counter32, Integer32, IpAddress, MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
DisplayString,PhysAddress
FROM SNMPv2-TC
;
netscreenInterfaceMibModule MODULE-IDENTITY
LAST-UPDATED "200405032022Z" -- May 03, 2004
ORGANIZATION
"Juniper Networks, Inc."
CONTACT-INFO
"Customer Support
1194 North Mathilda Avenue
Sunnyvale, California 94089-1206
USA
Tel: 1-800-638-8296
E-mail: customerservice@juniper.net
HTTP://www.juniper.net"
DESCRIPTION
"This module defines the object that are used to monitor NS's
interface configuration"
REVISION "200405030000Z" -- May 03, 2004
DESCRIPTION
"Modified copyright and contact information"
REVISION "200403030000Z" -- March 03, 2004
DESCRIPTION
"Converted to SMIv2 by Longview Software"
REVISION "200109280000Z" -- September 28, 2001
DESCRIPTION
"No Comment"
REVISION "200105110000Z" -- May 11, 2001
DESCRIPTION
"Creation Date"
::= { netscreenInterface 0 }
NsIfEntry ::= SEQUENCE
{
nsIfIndex Integer32,
nsIfName DisplayString,
nsIfVsys Integer32,
nsIfZone Integer32,
nsIfStatus INTEGER,
nsIfIp IpAddress,
nsIfNetmask IpAddress,
nsIfGateway IpAddress,
nsIfMngIp IpAddress,
nsIfMode INTEGER,
nsIfMAC PhysAddress,
nsIfMngTelnet INTEGER,
nsIfMngSCS INTEGER,
nsIfMngWEB INTEGER,
nsIfMngSSL INTEGER,
nsIfMngSNMP INTEGER,
nsIfMngGlobal INTEGER,
nsIfMngGlobalPro INTEGER,
nsIfMngPing INTEGER,
nsIfMngIdentReset INTEGER,
nsIfInfo Integer32,
nsIfDescr DisplayString
}
NsIfFlowEntry ::= SEQUENCE
{
nsIfFlowIfIdx Integer32,
nsIfFlowVsys Integer32,
nsIfFlowInByte Counter32,
nsIfFlowInPacket Counter32,
nsIfFlowOutByte Counter32,
nsIfFlowOutPacket Counter32,
nsIfFlowInVpn Counter32,
nsIfInVlan Counter32,
nsIfOutVlan Counter32,
nsIfFlowIfInfo Integer32
}
NsIfMonEntry ::= SEQUENCE
{
nsIfMonIfIdx Integer32,
nsIfMonVsys Integer32,
nsIfMonPlyDeny Counter32,
nsIfMonAuthFail Counter32,
nsIfMonUrlBlock Counter32,
nsIfMonTrMngQueue Counter32,
nsIfMonTrMngDrop Counter32,
nsIfMonEncFail Counter32,
nsIfMonNoSa Counter32,
nsIfMonNoSaPly Counter32,
nsIfMonSaInactive Counter32,
nsIfMonSaPolicyDeny Counter32,
nsIfMonIfInfo Integer32
}
NsIfSecondaryIpEntry ::= SEQUENCE
{
nsIfSecondaryIpIndex Integer32,
nsIfSecondaryIpIfIdx Integer32,
nsIfSecondaryIpVsys Integer32,
nsIfSecondaryIpZone Integer32,
nsIfSecondaryIpAddress IpAddress,
nsIfSecondaryIpNetmask IpAddress,
nsIfSecondaryIpIfInfo Integer32
}
nsIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF NsIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"All NetScreen devices have a trusted interface and an
untrusted interface. The NetScreen-10 and -100 also have a DMZ
interface. Additionally, on each of the virtual systems
supported by the NetScreen-1000 there can be on or more tursted
subinterfaces linking a particular virtual system to one or
more virtual LANs. Other interfaces-some physical, some
logical, and some virtual-provide exclusive channels for
administrative traffic, or for communication among member in a
redundant group. In this table, it will collect following
interface: tursted interface, untrusted interface, DMZ
interface, Management Interface and Subinterface."
::= { netscreenInterface 1 }
nsIfEntry OBJECT-TYPE
SYNTAX NsIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"nsIfEntry collects some attributes about NetScreen interface
settings."
INDEX
{ nsIfIndex }
::= { nsIfTable 1 }
nsIfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Interface number which uniquely identifies an interface."
::= { nsIfEntry 1 }
nsIfName OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each interface has a readable name such as 'trust', 'trust/1',
etc."
::= { nsIfEntry 2 }
nsIfVsys OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"According NetScreen's concepts, each interface belongs to one
virtual system. This attribute displays the virtual system name
an interface belongs to. If the device is device which doesn't
support vsys such as NS-100, we can logically think all the
setting belongs to 'root' vsys."
::= { nsIfEntry 3 }
nsIfZone OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each interface belongs to one security zone. This attribute
displays the security zone name an interface belongs to."
::= { nsIfEntry 4 }
nsIfStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
up(1),
ready(2),
inactive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface status which indicates interface's operational
status."
::= { nsIfEntry 5 }
nsIfIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each interface must be assigned an IP address."
::= { nsIfEntry 6 }
nsIfNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each interface must belong to a subnet represented by
netmask."
::= { nsIfEntry 7 }
nsIfGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Default gateway ip address."
::= { nsIfEntry 8 }
nsIfMngIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Trusted, untrusted and DMZ interfaces can have two IP address:
an interface IP address that corresponds to the physical port
through which that interface connects to a network, and a
Manage IP address that can be used to receive administrative
traffic"
::= { nsIfEntry 9 }
nsIfMode OBJECT-TYPE
SYNTAX INTEGER {
transparent(0),
nat(1),
route(2),
not-applicable(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"NetScreen interface can has three operation modes. They are
transparent, nat and route."
::= { nsIfEntry 10 }
nsIfMAC OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MAC address the interface has."
::= { nsIfEntry 11 }
nsIfMngTelnet OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is used to indicate whether the interface
permits telnet management."
::= { nsIfEntry 12 }
nsIfMngSCS OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is used to indicate whether the interface
permits Secure Command Shell management."
::= { nsIfEntry 13 }
nsIfMngWEB OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is used to indicate whether the interface
permits WEB UI management."
::= { nsIfEntry 14 }
nsIfMngSSL OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is used to indicate whether the interface
permits SSL management."
::= { nsIfEntry 15 }
nsIfMngSNMP OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is used to indicate whether the interface
permits SNMP management."
::= { nsIfEntry 16 }
nsIfMngGlobal OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is used to indicate whether the interface
permits NS Global management."
::= { nsIfEntry 17 }
nsIfMngGlobalPro OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is used to indicate whether the interface
permits NS Global Pro management."
::= { nsIfEntry 18 }
nsIfMngPing OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is used to indicate whether the interface
permits Ping go-through."
::= { nsIfEntry 19 }
nsIfMngIdentReset OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is used to indicate whether the interface
permits ident reset."
::= { nsIfEntry 20 }
nsIfInfo OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal id assigned to this interface. Stays persistent across resets."
::= { nsIfEntry 21 }
nsIfDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each interface has a a configurable descriptor string."
::= { nsIfEntry 22 }
nsIfSecondaryIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF NsIfSecondaryIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"In some ScreenOS, it supports multiple IP addresses and
related subnets based on the same interface. This table
collects the multiple IP addresses configuration on an
interface."
::= { netscreenInterface 2 }
nsIfSecondaryIpEntry OBJECT-TYPE
SYNTAX NsIfSecondaryIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"nsIfSecondaryIpEntry collects some attributes about multiple
IP configurations on an interface."
INDEX
{ nsIfSecondaryIpIndex }
::= { nsIfSecondaryIpTable 1 }
nsIfSecondaryIpIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The table index used as primary key when retrieving the
table."
::= { nsIfSecondaryIpEntry 1 }
nsIfSecondaryIpIfIdx OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The index value which uniquely identifies an interface the
secodary ip belongs to. The interface identified by a
particular value of this index is the same interface as
identified by the same value of ifIndex."
::= { nsIfSecondaryIpEntry 2 }
nsIfSecondaryIpVsys OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"According NetScreen's concepts, each interface belongs to one
virtual system. This attribute displays the virtual system ID
an interface belongs to. If the device is device which doesn't
support vsys such as NS-100, we can logically think all the
setting belongs to 'root' vsys."
::= { nsIfSecondaryIpEntry 3 }
nsIfSecondaryIpZone OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"each interface belongs to one security zone. this attribute
displays the security zone name an interface belongs to."
::= { nsIfSecondaryIpEntry 4 }
nsIfSecondaryIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ip Address value."
::= { nsIfSecondaryIpEntry 5 }
nsIfSecondaryIpNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Subnet of a ip belongs to."
::= { nsIfSecondaryIpEntry 6 }
nsIfSecondaryIpIfInfo OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal id assigned to this interface. Stays persistent across resets."
::= { nsIfSecondaryIpEntry 7 }
nsIfFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF NsIfFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"nsIfFlowTable is used to get flow statistical information of
the interface."
::= { netscreenInterface 3 }
nsIfFlowEntry OBJECT-TYPE
SYNTAX NsIfFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table entry collect some attributes about interface flow
counters."
INDEX
{ nsIfFlowIfIdx }
::= { nsIfFlowTable 1 }
nsIfFlowIfIdx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique interface id, also used as table index."
::= { nsIfFlowEntry 1 }
nsIfFlowVsys OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"According NetScreen's concepts. each interface belongs to one
virtual system. This attribute displays the virtual system name
an interface belongs to."
::= { nsIfFlowEntry 2 }
nsIfFlowInByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Incoming byte number arriving at the this interface"
::= { nsIfFlowEntry 3 }
nsIfFlowInPacket OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Incoming packet number arriving at the this interface"
::= { nsIfFlowEntry 4 }
nsIfFlowOutByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outgoing byte number sending through this interface"
::= { nsIfFlowEntry 5 }
nsIfFlowOutPacket OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outgoing packet number sending through this interface"
::= { nsIfFlowEntry 6 }
nsIfFlowInVpn OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPN packet go through this interface"
::= { nsIfFlowEntry 7 }
nsIfInVlan OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Incoming vlan packet"
::= { nsIfFlowEntry 8 }
nsIfOutVlan OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Outgoing vlan packet"
::= { nsIfFlowEntry 9 }
nsIfFlowIfInfo OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal id assigned to this interface. Stays persistent across resets."
::= { nsIfFlowEntry 10 }
nsIfMonTable OBJECT-TYPE
SYNTAX SEQUENCE OF NsIfMonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table collects some of dropped packet counters of
interface"
::= { netscreenInterface 4 }
nsIfMonEntry OBJECT-TYPE
SYNTAX NsIfMonEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing tunnel information"
INDEX
{ nsIfMonIfIdx }
::= { nsIfMonTable 1 }
nsIfMonIfIdx OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique interface id, also used as table index."
::= { nsIfMonEntry 1 }
nsIfMonVsys OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"According NetScreen's concepts, each interface belongs to one
virtual system. This attribute displays the virtual system name
an interface belongs to."
::= { nsIfMonEntry 2 }
nsIfMonPlyDeny OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet drop since denied by policy."
::= { nsIfMonEntry 3 }
nsIfMonAuthFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet drop due to authentication failed."
::= { nsIfMonEntry 4 }
nsIfMonUrlBlock OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet drop due to URL blocking."
::= { nsIfMonEntry 5 }
nsIfMonTrMngQueue OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"packet queue up due to traffic management"
::= { nsIfMonEntry 6 }
nsIfMonTrMngDrop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Packet drop due to traffic management"
::= { nsIfMonEntry 7 }
nsIfMonEncFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IPSec enc failed due to sa not available, no ipak, etc"
::= { nsIfMonEntry 8 }
nsIfMonNoSa OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"packet drop due to no sa found for incomig spi"
::= { nsIfMonEntry 9 }
nsIfMonNoSaPly OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"packet drop due to no policy associated with found sa"
::= { nsIfMonEntry 10 }
nsIfMonSaInactive OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"packet drop due to sa not active"
::= { nsIfMonEntry 11 }
nsIfMonSaPolicyDeny OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"packet drop due to denial by sa policy"
::= { nsIfMonEntry 12 }
nsIfMonIfInfo OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Internal id assigned to this interface. Stays persistent across resets."
::= { nsIfMonEntry 13 }
END