mibs/MIBS/sentry/Sentry4-MIB

4777 lines
156 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
--
-- Copyright(C) 2003-2017 Server Technology, Inc.
--
Sentry4-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, enterprises, Integer32,
OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI
OBJECT-GROUP, NOTIFICATION-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF
TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC;
sentry4 MODULE-IDENTITY
LAST-UPDATED "201706151830Z" -- 15 June 2017
ORGANIZATION "Server Technology, Inc."
CONTACT-INFO
"Server Technology, Inc.
1040 Sandhill Road
Reno, NV 89521
Tel: (775) 284-2000
Fax: (775) 284-2065
Email: mibmaster@servertech.com"
DESCRIPTION
"This is the MIB module for the fourth generation of the
Sentry product family. This includes the PRO1 and PRO2
series of Smart and Switched Cabinet Distribution Unit (CDU)
and Power Distribution Unit (PDU) products."
REVISION "201706151830Z" -- 15 June 2017
DESCRIPTION
"Added support for fan sensors, including objects for installed
count, identification, speed and status monitoring, threshold
and hysteresis configuration, and a notification for events.
Added the st4UnitOutletDisplayOrder object."
REVISION "201611182340Z" -- 18 November 2016
DESCRIPTION
"Added the st4UnitProductMfrDate object. Adjusted the upper
limit of voltage objects to 600 Volts."
REVISION "201609212300Z" -- 21 September 2016
DESCRIPTION
"Fixed the st4InputCordOutOfBalanceEvent notification
definition to include the correct objects."
REVISION "201604252140Z" -- 25 April 2016
DESCRIPTION
"Added support for the PRO1 product series. Added the
st4SystemProductSeries and st4InputCordNominalPowerFactor
objects. Adjusted the upper limit of cord and line current
objects to 600 Amps. Adjusted the lower limit of nominal
voltage objects to 0 Volts. Corrected the lower limit of
several configuration objects from -1 to 0."
REVISION "201502191000Z" -- 19 February 2015
DESCRIPTION
"Corrected the UNITS and value range of temperature sensor
threshold objects."
REVISION "201412231130Z" -- 23 December 2014
DESCRIPTION
"Initial release."
::= { serverTech 4 }
serverTech OBJECT IDENTIFIER ::= { enterprises 1718 }
-- Common Definitions
DeviceStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Status returned by devices."
SYNTAX INTEGER {
normal(0), -- operating properly
disabled(1), -- disabled
purged(2), -- purged
reading(5), -- read in process
settle(6), -- is settling
notFound(7), -- never connected
lost(8), -- disconnected
readError(9), -- read failure
noComm(10), -- unreachable
pwrError(11), -- power detection error
breakerTripped(12), -- breaker error
fuseBlown(13), -- fuse error
lowAlarm(14), -- under low alarm threshold
lowWarning(15), -- under low warning threshold
highWarning(16), -- over high warning threshold
highAlarm(17), -- over high alarm threshold
alarm(18), -- general alarm
underLimit(19), -- under limit alarm
overLimit(20), -- over limit alarm
nvmFail(21), -- NVM failure
profileError(22), -- profile error
conflict(23) -- conflict
}
DeviceState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"On or off state of devices."
SYNTAX INTEGER {
unknown(0), -- on / off state is unknown
on(1), -- is on
off(2) -- is off
}
EventNotificationMethods ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Bits to enable event notification methods."
SYNTAX BITS {
snmpTrap(0), -- enables notifications by SNMP traps
email(1) -- enables notifications by Email
}
-- Object Definitions
st4Objects OBJECT IDENTIFIER ::= { sentry4 1 }
-- System
st4System OBJECT IDENTIFIER ::= { st4Objects 1 }
-- System Configuration
st4SystemConfig OBJECT IDENTIFIER ::= { st4System 1 }
st4SystemProductName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The product name."
::= { st4SystemConfig 1 }
st4SystemLocation OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The location of the system."
::= { st4SystemConfig 2 }
st4SystemFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The firmware version."
::= { st4SystemConfig 3 }
st4SystemFirmwareBuildInfo OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The firmware build information."
::= { st4SystemConfig 4 }
st4SystemNICSerialNumber OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number of the network interface card."
::= { st4SystemConfig 5 }
st4SystemNICHardwareInfo OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..63))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Hardware information about the network interface card."
::= { st4SystemConfig 6 }
st4SystemProductSeries OBJECT-TYPE
SYNTAX INTEGER {
pro1(0),
pro2(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The product series."
::= { st4SystemConfig 7 }
st4SystemFeatures OBJECT-TYPE
SYNTAX BITS {
smartLoadShedding(0),
reserved(1),
outletControlInhibit(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The key-activated features enabled in the system."
::= { st4SystemConfig 10 }
st4SystemFeatureKey OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..19))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A valid feature key written to this object will enable a
feature in the system. A valid feature key is in the form
xxxx-xxxx-xxxx-xxxx. A read of this object returns an
empty string."
::= { st4SystemConfig 11 }
st4SystemConfigModifiedCount OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the system configuration has changed."
::= { st4SystemConfig 20 }
st4SystemUnitCount OBJECT-TYPE
SYNTAX Integer32(0..8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of units in the system."
::= { st4SystemConfig 21 }
-- Units
st4Units OBJECT IDENTIFIER ::= { st4Objects 2 }
-- Unit Common Configuration
st4UnitCommonConfig OBJECT IDENTIFIER ::= { st4Units 1 }
-- Unit Configuration Table
st4UnitConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4UnitConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unit configuration table."
::= { st4Units 2 }
st4UnitConfigEntry OBJECT-TYPE
SYNTAX St4UnitConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular unit."
INDEX { st4UnitIndex }
::= { st4UnitConfigTable 1 }
St4UnitConfigEntry ::= SEQUENCE {
st4UnitIndex Integer32,
st4UnitID DisplayString,
st4UnitName DisplayString,
st4UnitProductSN DisplayString,
st4UnitModel DisplayString,
st4UnitAssetTag DisplayString,
st4UnitType INTEGER,
st4UnitCapabilities BITS,
st4UnitProductMfrDate DisplayString,
st4UnitDisplayOrientation INTEGER,
st4UnitOutletSequenceOrder INTEGER,
st4UnitOutletDisplayOrder INTEGER,
st4UnitInputCordCount Integer32,
st4UnitTempSensorCount Integer32,
st4UnitHumidSensorCount Integer32,
st4UnitWaterSensorCount Integer32,
st4UnitCcSensorCount Integer32,
st4UnitAdcSensorCount Integer32,
st4UnitFanSensorCount Integer32
}
st4UnitIndex OBJECT-TYPE
SYNTAX Integer32(1..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unit index. A=1, B=2, C=3, D=4, E=5, F=6."
::= { st4UnitConfigEntry 1 }
st4UnitID OBJECT-TYPE
SYNTAX DisplayString(SIZE(1))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the unit. Format=A."
::= { st4UnitConfigEntry 2 }
st4UnitName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the unit."
::= { st4UnitConfigEntry 3 }
st4UnitProductSN OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The product serial number of the unit."
::= { st4UnitConfigEntry 4 }
st4UnitModel OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The model of the unit."
::= { st4UnitConfigEntry 5 }
st4UnitAssetTag OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The asset tag of the unit."
::= { st4UnitConfigEntry 6 }
st4UnitType OBJECT-TYPE
SYNTAX INTEGER {
masterPdu(0),
linkPdu(1),
controller(2),
emcu(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the unit."
::= { st4UnitConfigEntry 7 }
st4UnitCapabilities OBJECT-TYPE
SYNTAX BITS {
dc(0), -- unit is DC
phase3(1), -- unit is 3 phase
wye(2), -- unit has Wye circuits
delta(3) -- unit has Delta circuits
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The capabilities of the unit."
::= { st4UnitConfigEntry 8 }
st4UnitProductMfrDate OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..10))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The product manufacture date in YYYY-MM-DD (ISO 8601 format) of
the unit."
::= { st4UnitConfigEntry 9 }
st4UnitDisplayOrientation OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
inverted(1),
auto(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The orientation of all displays in the unit."
::= { st4UnitConfigEntry 20 }
st4UnitOutletSequenceOrder OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
reversed(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The sequencing order of all outlets in the unit."
::= { st4UnitConfigEntry 21 }
st4UnitOutletDisplayOrder OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
reversed(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The display order in the user interfaces of all outlets in the
unit."
::= { st4UnitConfigEntry 22 }
st4UnitInputCordCount OBJECT-TYPE
SYNTAX Integer32(0..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of power input cords into the unit."
::= { st4UnitConfigEntry 30 }
st4UnitTempSensorCount OBJECT-TYPE
SYNTAX Integer32(0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of external temperature sensors supported by the unit."
::= { st4UnitConfigEntry 31 }
st4UnitHumidSensorCount OBJECT-TYPE
SYNTAX Integer32(0..2)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of external humidity sensors supported by the unit."
::= { st4UnitConfigEntry 32 }
st4UnitWaterSensorCount OBJECT-TYPE
SYNTAX Integer32(0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of external water sensors supported by the unit."
::= { st4UnitConfigEntry 33 }
st4UnitCcSensorCount OBJECT-TYPE
SYNTAX Integer32(0..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of external contact closure sensors supported by the
unit."
::= { st4UnitConfigEntry 34 }
st4UnitAdcSensorCount OBJECT-TYPE
SYNTAX Integer32(0..1)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of analog-to-digital converter sensors supported by the
unit."
::= { st4UnitConfigEntry 35 }
st4UnitFanSensorCount OBJECT-TYPE
SYNTAX Integer32(0..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of fan sensors supported by the unit."
::= { st4UnitConfigEntry 36 }
-- Unit Monitor Table
st4UnitMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4UnitMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unit monitor table."
::= { st4Units 3 }
st4UnitMonitorEntry OBJECT-TYPE
SYNTAX St4UnitMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular unit."
INDEX { st4UnitIndex }
::= { st4UnitMonitorTable 1 }
St4UnitMonitorEntry ::= SEQUENCE {
st4UnitStatus DeviceStatus
}
st4UnitStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the unit."
::= { st4UnitMonitorEntry 1 }
-- Unit Event Configuration Table
st4UnitEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4UnitEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Unit event configuration table."
::= { st4Units 4 }
st4UnitEventConfigEntry OBJECT-TYPE
SYNTAX St4UnitEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular unit."
INDEX { st4UnitIndex }
::= { st4UnitEventConfigTable 1 }
St4UnitEventConfigEntry ::= SEQUENCE {
st4UnitNotifications EventNotificationMethods
}
st4UnitNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for unit events."
::= { st4UnitEventConfigEntry 1 }
-- Input Cords
st4InputCords OBJECT IDENTIFIER ::= { st4Objects 3 }
-- Input Cord Common Configuration
st4InputCordCommonConfig OBJECT IDENTIFIER ::= { st4InputCords 1 }
st4InputCordActivePowerHysteresis OBJECT-TYPE
SYNTAX Integer32(0..1000)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active power hysteresis of the input cord in Watts."
::= { st4InputCordCommonConfig 1 }
st4InputCordApparentPowerHysteresis OBJECT-TYPE
SYNTAX Integer32(0..1000)
UNITS "Volt-Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The apparent power hysteresis of the input cord in Volt-Amps."
::= { st4InputCordCommonConfig 2 }
st4InputCordPowerFactorHysteresis OBJECT-TYPE
SYNTAX Integer32(0..20)
UNITS "hundredths"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power factor hysteresis of the input cord in hundredths."
::= { st4InputCordCommonConfig 3 }
st4InputCordOutOfBalanceHysteresis OBJECT-TYPE
SYNTAX Integer32(0..10)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 3 phase out-of-balance hysteresis of the input cord in
percent."
::= { st4InputCordCommonConfig 4 }
-- Input Cord Configuration Table
st4InputCordConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4InputCordConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Input cord configuration table."
::= { st4InputCords 2 }
st4InputCordConfigEntry OBJECT-TYPE
SYNTAX St4InputCordConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular input cord."
INDEX { st4UnitIndex, st4InputCordIndex }
::= { st4InputCordConfigTable 1 }
St4InputCordConfigEntry ::= SEQUENCE {
st4InputCordIndex Integer32,
st4InputCordID DisplayString,
st4InputCordName DisplayString,
st4InputCordInletType DisplayString,
st4InputCordNominalVoltage Integer32,
st4InputCordNominalVoltageMin Integer32,
st4InputCordNominalVoltageMax Integer32,
st4InputCordCurrentCapacity Integer32,
st4InputCordCurrentCapacityMax Integer32,
st4InputCordPowerCapacity Integer32,
st4InputCordNominalPowerFactor Integer32,
st4InputCordLineCount Integer32,
st4InputCordPhaseCount Integer32,
st4InputCordOcpCount Integer32,
st4InputCordBranchCount Integer32,
st4InputCordOutletCount Integer32
}
st4InputCordIndex OBJECT-TYPE
SYNTAX Integer32(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Input cord index. A=1, B=2, C=3, D=4."
::= { st4InputCordConfigEntry 1 }
st4InputCordID OBJECT-TYPE
SYNTAX DisplayString(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the input cord. Format=AA."
::= { st4InputCordConfigEntry 2 }
st4InputCordName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the input cord."
::= { st4InputCordConfigEntry 3 }
st4InputCordInletType OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of plug on the input cord, or socket for the input cord."
::= { st4InputCordConfigEntry 6}
st4InputCordNominalVoltage OBJECT-TYPE
SYNTAX Integer32(0..6000)
UNITS "tenth Volts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user-configured nominal voltage of the input cord in tenth
Volts."
::= { st4InputCordConfigEntry 7 }
st4InputCordNominalVoltageMin OBJECT-TYPE
SYNTAX Integer32(0..600)
UNITS "Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The factory-set minimum allowed for the user-configured nominal
voltage of the input cord in Volts."
::= { st4InputCordConfigEntry 8 }
st4InputCordNominalVoltageMax OBJECT-TYPE
SYNTAX Integer32(0..600)
UNITS "Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The factory-set maximum allowed for the user-configured nominal
voltage of the input cord in Volts."
::= { st4InputCordConfigEntry 9 }
st4InputCordCurrentCapacity OBJECT-TYPE
SYNTAX Integer32(0..600)
UNITS "Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user-configured current capacity of the input cord in Amps."
::= { st4InputCordConfigEntry 10 }
st4InputCordCurrentCapacityMax OBJECT-TYPE
SYNTAX Integer32(0..600)
UNITS "Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The factory-set maximum allowed for the user-configured current
capacity of the input cord in Amps."
::= { st4InputCordConfigEntry 11 }
st4InputCordPowerCapacity OBJECT-TYPE
SYNTAX Integer32(0..50000)
UNITS "Volt-Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power capacity of the input cord in Volt-Amps. For DC
products, this is identical to power capacity in Watts."
::= { st4InputCordConfigEntry 12 }
st4InputCordNominalPowerFactor OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "hundredths"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user-configured estimated nominal power factor of the input
cord in hundredths."
::= { st4InputCordConfigEntry 13 }
st4InputCordLineCount OBJECT-TYPE
SYNTAX Integer32(0..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of current-carrying lines in the input cord."
::= { st4InputCordConfigEntry 20 }
st4InputCordPhaseCount OBJECT-TYPE
SYNTAX Integer32(0..6)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of active phases from the lines in the input cord."
::= { st4InputCordConfigEntry 21 }
st4InputCordOcpCount OBJECT-TYPE
SYNTAX Integer32(0..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of over-current protectors downstream from the input
cord."
::= { st4InputCordConfigEntry 22 }
st4InputCordBranchCount OBJECT-TYPE
SYNTAX Integer32(0..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of branches downstream from the input cord."
::= { st4InputCordConfigEntry 23 }
st4InputCordOutletCount OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outlets powered from the input cord."
::= { st4InputCordConfigEntry 24 }
-- Input Cord Monitor Table
st4InputCordMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4InputCordMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Input cord monitor table."
::= { st4InputCords 3 }
st4InputCordMonitorEntry OBJECT-TYPE
SYNTAX St4InputCordMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular input cord."
INDEX { st4UnitIndex, st4InputCordIndex }
::= { st4InputCordMonitorTable 1 }
St4InputCordMonitorEntry ::= SEQUENCE {
st4InputCordState DeviceState,
st4InputCordStatus DeviceStatus,
st4InputCordActivePower Integer32,
st4InputCordActivePowerStatus DeviceStatus,
st4InputCordApparentPower Integer32,
st4InputCordApparentPowerStatus DeviceStatus,
st4InputCordPowerUtilized Integer32,
st4InputCordPowerFactor Integer32,
st4InputCordPowerFactorStatus DeviceStatus,
st4InputCordEnergy Integer32,
st4InputCordFrequency Integer32,
st4InputCordOutOfBalance Integer32,
st4InputCordOutOfBalanceStatus DeviceStatus
}
st4InputCordState OBJECT-TYPE
SYNTAX DeviceState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The on/off state of the input cord."
::= { st4InputCordMonitorEntry 1 }
st4InputCordStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the input cord."
::= { st4InputCordMonitorEntry 2 }
st4InputCordActivePower OBJECT-TYPE
SYNTAX Integer32(-1..50000)
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured active power of the input cord in Watts."
::= { st4InputCordMonitorEntry 3 }
st4InputCordActivePowerStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the measured active power of the input cord."
::= { st4InputCordMonitorEntry 4 }
st4InputCordApparentPower OBJECT-TYPE
SYNTAX Integer32(-1..50000)
UNITS "Volt-Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured apparent power of the input cord in Volt-Amps."
::= { st4InputCordMonitorEntry 5 }
st4InputCordApparentPowerStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the measured apparent power of the input cord."
::= { st4InputCordMonitorEntry 6 }
st4InputCordPowerUtilized OBJECT-TYPE
SYNTAX Integer32(-1..1200)
UNITS "tenth percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of the input cord power capacity used in tenth percent.
For AC products, this is the ratio of the apparent power to the
power capacity. For DC products, this is the ratio of the active
power to the power capacity."
::= { st4InputCordMonitorEntry 7 }
st4InputCordPowerFactor OBJECT-TYPE
SYNTAX Integer32(-1..100)
UNITS "hundredths"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured power factor of the input cord in hundredths."
::= { st4InputCordMonitorEntry 8 }
st4InputCordPowerFactorStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the measured power factor of the input cord."
::= { st4InputCordMonitorEntry 9 }
st4InputCordEnergy OBJECT-TYPE
SYNTAX Integer32(-1..2147483647)
UNITS "tenth Kilowatt-Hours"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total energy consumption of loads through the input cord in
tenth Kilowatt-Hours."
::= { st4InputCordMonitorEntry 10 }
st4InputCordFrequency OBJECT-TYPE
SYNTAX Integer32(-1..1000)
UNITS "tenth Hertz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The frequency of the input cord voltage in tenth Hertz."
::= { st4InputCordMonitorEntry 11 }
st4InputCordOutOfBalance OBJECT-TYPE
SYNTAX Integer32(-1..2000)
UNITS "tenth percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current imbalance on the lines of the input cord in tenth
percent."
::= { st4InputCordMonitorEntry 12 }
st4InputCordOutOfBalanceStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the current imbalance on the lines of the input
cord."
::= { st4InputCordMonitorEntry 13 }
-- Input Cord Event Configuration Table
st4InputCordEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4InputCordEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Input cord event configuration table."
::= { st4InputCords 4 }
st4InputCordEventConfigEntry OBJECT-TYPE
SYNTAX St4InputCordEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular input cord."
INDEX { st4UnitIndex, st4InputCordIndex }
::= { st4InputCordEventConfigTable 1 }
St4InputCordEventConfigEntry ::= SEQUENCE {
st4InputCordNotifications EventNotificationMethods,
st4InputCordActivePowerLowAlarm Integer32,
st4InputCordActivePowerLowWarning Integer32,
st4InputCordActivePowerHighWarning Integer32,
st4InputCordActivePowerHighAlarm Integer32,
st4InputCordApparentPowerLowAlarm Integer32,
st4InputCordApparentPowerLowWarning Integer32,
st4InputCordApparentPowerHighWarning Integer32,
st4InputCordApparentPowerHighAlarm Integer32,
st4InputCordPowerFactorLowAlarm Integer32,
st4InputCordPowerFactorLowWarning Integer32,
st4InputCordOutOfBalanceHighWarning Integer32,
st4InputCordOutOfBalanceHighAlarm Integer32
}
st4InputCordNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for input cord events."
::= { st4InputCordEventConfigEntry 1 }
st4InputCordActivePowerLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..50000)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active power low alarm threshold of the input cord in Watts."
::= { st4InputCordEventConfigEntry 2 }
st4InputCordActivePowerLowWarning OBJECT-TYPE
SYNTAX Integer32(0..50000)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active power low warning threshold of the input cord in
Watts."
::= { st4InputCordEventConfigEntry 3 }
st4InputCordActivePowerHighWarning OBJECT-TYPE
SYNTAX Integer32(0..50000)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active power high warning threshold of the input cord in
Watts."
::= { st4InputCordEventConfigEntry 4 }
st4InputCordActivePowerHighAlarm OBJECT-TYPE
SYNTAX Integer32(0..50000)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active power high alarm threshold of the input cord in Watts."
::= { st4InputCordEventConfigEntry 5 }
st4InputCordApparentPowerLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..50000)
UNITS "Volt-Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The apparent power low alarm threshold of the input cord in
Volt-Amps."
::= { st4InputCordEventConfigEntry 6 }
st4InputCordApparentPowerLowWarning OBJECT-TYPE
SYNTAX Integer32(0..50000)
UNITS "Volt-Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The apparent power low warning threshold of the input cord in
Volt-Amps."
::= { st4InputCordEventConfigEntry 7 }
st4InputCordApparentPowerHighWarning OBJECT-TYPE
SYNTAX Integer32(0..50000)
UNITS "Volt-Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The apparent power high warning threshold of the input cord in
Volt-Amps."
::= { st4InputCordEventConfigEntry 8 }
st4InputCordApparentPowerHighAlarm OBJECT-TYPE
SYNTAX Integer32(0..50000)
UNITS "Volt-Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The apparent power high alarm threshold of the input cord in
Volt-Amps."
::= { st4InputCordEventConfigEntry 9 }
st4InputCordPowerFactorLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "hundredths"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power factor low alarm threshold of the input cord in
hundredths."
::= { st4InputCordEventConfigEntry 10 }
st4InputCordPowerFactorLowWarning OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "hundredths"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power factor low warning threshold of the input cord in
hundredths."
::= { st4InputCordEventConfigEntry 11 }
st4InputCordOutOfBalanceHighWarning OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 3 phase out-of-balance high warning threshold of the input
cord in percent."
::= { st4InputCordEventConfigEntry 12 }
st4InputCordOutOfBalanceHighAlarm OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 3 phase out-of-balance high alarm threshold of the input cord
in percent."
::= { st4InputCordEventConfigEntry 13 }
-- Lines
st4Lines OBJECT IDENTIFIER ::= { st4Objects 4 }
-- Line Common Configuration
st4LineCommonConfig OBJECT IDENTIFIER ::= { st4Lines 1 }
st4LineCurrentHysteresis OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current hysteresis of the line in tenth Amps."
::= { st4LineCommonConfig 1 }
-- Line Configuration Table
st4LineConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4LineConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Line configuration table."
::= { st4Lines 2 }
st4LineConfigEntry OBJECT-TYPE
SYNTAX St4LineConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular line."
INDEX { st4UnitIndex, st4InputCordIndex, st4LineIndex }
::= { st4LineConfigTable 1 }
St4LineConfigEntry ::= SEQUENCE {
st4LineIndex Integer32,
st4LineID DisplayString,
st4LineLabel DisplayString,
st4LineCurrentCapacity Integer32
}
st4LineIndex OBJECT-TYPE
SYNTAX Integer32(1..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Line index. L1=1, L2=2, L3=3, N=4."
::= { st4LineConfigEntry 1 }
st4LineID OBJECT-TYPE
SYNTAX DisplayString(SIZE(3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the line. Format=AAN."
::= { st4LineConfigEntry 2 }
st4LineLabel OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system label assigned to the line for identification."
::= { st4LineConfigEntry 4 }
st4LineCurrentCapacity OBJECT-TYPE
SYNTAX Integer32(0..600)
UNITS "Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current capacity of the line in Amps."
::= { st4LineConfigEntry 6 }
-- Line Monitor Table
st4LineMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4LineMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Line monitor table."
::= { st4Lines 3 }
st4LineMonitorEntry OBJECT-TYPE
SYNTAX St4LineMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular line."
INDEX { st4UnitIndex, st4InputCordIndex, st4LineIndex }
::= { st4LineMonitorTable 1 }
St4LineMonitorEntry ::= SEQUENCE {
st4LineState DeviceState,
st4LineStatus DeviceStatus,
st4LineCurrent Integer32,
st4LineCurrentStatus DeviceStatus,
st4LineCurrentUtilized Integer32
}
st4LineState OBJECT-TYPE
SYNTAX DeviceState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The on/off state of the line."
::= { st4LineMonitorEntry 1 }
st4LineStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the line."
::= { st4LineMonitorEntry 2 }
st4LineCurrent OBJECT-TYPE
SYNTAX Integer32(-1..60000)
UNITS "hundredth Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured current on the line in hundredth Amps."
::= { st4LineMonitorEntry 3 }
st4LineCurrentStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the measured current on the line."
::= { st4LineMonitorEntry 4 }
st4LineCurrentUtilized OBJECT-TYPE
SYNTAX Integer32(-1..1200)
UNITS "tenth percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of the line current capacity used in tenth percent."
::= { st4LineMonitorEntry 5 }
-- Line Event Configuration Table
st4LineEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4LineEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Line event configuration table."
::= { st4Lines 4 }
st4LineEventConfigEntry OBJECT-TYPE
SYNTAX St4LineEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular line."
INDEX { st4UnitIndex, st4InputCordIndex, st4LineIndex }
::= { st4LineEventConfigTable 1 }
St4LineEventConfigEntry ::= SEQUENCE {
st4LineNotifications EventNotificationMethods,
st4LineCurrentLowAlarm Integer32,
st4LineCurrentLowWarning Integer32,
st4LineCurrentHighWarning Integer32,
st4LineCurrentHighAlarm Integer32
}
st4LineNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for line events."
::= { st4LineEventConfigEntry 1 }
st4LineCurrentLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..6000)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current low alarm threshold of the line in tenth Amps."
::= { st4LineEventConfigEntry 2 }
st4LineCurrentLowWarning OBJECT-TYPE
SYNTAX Integer32(0..6000)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current low warning threshold of the line in tenth Amps."
::= { st4LineEventConfigEntry 3 }
st4LineCurrentHighWarning OBJECT-TYPE
SYNTAX Integer32(0..6000)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current high warning threshold of the line in tenth Amps."
::= { st4LineEventConfigEntry 4 }
st4LineCurrentHighAlarm OBJECT-TYPE
SYNTAX Integer32(0..6000)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current high alarm threshold of the line in tenth Amps."
::= { st4LineEventConfigEntry 5 }
-- Phases
st4Phases OBJECT IDENTIFIER ::= { st4Objects 5 }
-- Phase Common Configuration
st4PhaseCommonConfig OBJECT IDENTIFIER ::= { st4Phases 1 }
st4PhaseVoltageHysteresis OBJECT-TYPE
SYNTAX Integer32(0..200)
UNITS "tenth Volts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The voltage hysteresis of the phase in tenth Volts."
::= { st4PhaseCommonConfig 1 }
st4PhasePowerFactorHysteresis OBJECT-TYPE
SYNTAX Integer32(0..20)
UNITS "hundredths"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power factor hysteresis of the phase in hundredths."
::= { st4PhaseCommonConfig 2 }
-- Phase Configuration Table
st4PhaseConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4PhaseConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Phase configuration table."
::= { st4Phases 2 }
st4PhaseConfigEntry OBJECT-TYPE
SYNTAX St4PhaseConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular phase."
INDEX { st4UnitIndex, st4InputCordIndex, st4PhaseIndex }
::= { st4PhaseConfigTable 1 }
St4PhaseConfigEntry ::= SEQUENCE {
st4PhaseIndex Integer32,
st4PhaseID DisplayString,
st4PhaseLabel DisplayString,
st4PhaseNominalVoltage Integer32,
st4PhaseBranchCount Integer32,
st4PhaseOutletCount Integer32
}
st4PhaseIndex OBJECT-TYPE
SYNTAX Integer32(1..6)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Phase index. Three-phase AC Wye: L1-N=1, L2-N=2, L3-N=3;
Three-phase AC Delta: L1-L2=1, L2-L3=2, L3-L1=3; Single Phase:
L1-R=1; DC: L1-R=1; Three-phase AC Wye & Delta: L1-N=1, L2-N=2,
L3-N=3, L1-L2=4, L2-L3=5; L3-L1=6."
::= { st4PhaseConfigEntry 1 }
st4PhaseID OBJECT-TYPE
SYNTAX DisplayString(SIZE(3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the phase. Format=AAN."
::= { st4PhaseConfigEntry 2 }
st4PhaseLabel OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system label assigned to the phase for identification."
::= { st4PhaseConfigEntry 4 }
st4PhaseNominalVoltage OBJECT-TYPE
SYNTAX Integer32(0..6000)
UNITS "tenth Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The nominal voltage of the phase in tenth Volts."
::= { st4PhaseConfigEntry 6 }
st4PhaseBranchCount OBJECT-TYPE
SYNTAX Integer32(0..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of branches downstream from the phase."
::= { st4PhaseConfigEntry 20 }
st4PhaseOutletCount OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outlets powered from the phase."
::= { st4PhaseConfigEntry 21 }
-- Phase Monitor Table
st4PhaseMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4PhaseMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Phase monitor table."
::= { st4Phases 3 }
st4PhaseMonitorEntry OBJECT-TYPE
SYNTAX St4PhaseMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular phase."
INDEX { st4UnitIndex, st4InputCordIndex, st4PhaseIndex }
::= { st4PhaseMonitorTable 1 }
St4PhaseMonitorEntry ::= SEQUENCE {
st4PhaseState DeviceState,
st4PhaseStatus DeviceStatus,
st4PhaseVoltage Integer32,
st4PhaseVoltageStatus DeviceStatus,
st4PhaseVoltageDeviation Integer32,
st4PhaseCurrent Integer32,
st4PhaseCurrentCrestFactor Integer32,
st4PhaseActivePower Integer32,
st4PhaseApparentPower Integer32,
st4PhasePowerFactor Integer32,
st4PhasePowerFactorStatus DeviceStatus,
st4PhaseReactance Integer32,
st4PhaseEnergy Integer32
}
st4PhaseState OBJECT-TYPE
SYNTAX DeviceState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The on/off state of the phase."
::= { st4PhaseMonitorEntry 1 }
st4PhaseStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the phase."
::= { st4PhaseMonitorEntry 2 }
st4PhaseVoltage OBJECT-TYPE
SYNTAX Integer32(-1..6000)
UNITS "tenth Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured voltage on the phase in tenth Volts."
::= { st4PhaseMonitorEntry 3 }
st4PhaseVoltageStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the measured voltage on the phase."
::= { st4PhaseMonitorEntry 4 }
st4PhaseVoltageDeviation OBJECT-TYPE
SYNTAX Integer32(-1000..1000)
UNITS "tenth percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The deviation from the nominal voltage on the phase in tenth
percent."
::= { st4PhaseMonitorEntry 5 }
st4PhaseCurrent OBJECT-TYPE
SYNTAX Integer32(-1..30000)
UNITS "hundredth Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured current on the phase in hundredth Amps."
::= { st4PhaseMonitorEntry 6 }
st4PhaseCurrentCrestFactor OBJECT-TYPE
SYNTAX Integer32(-1..250)
UNITS "tenths"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured crest factor of the current waveform on the phase in
tenths."
::= { st4PhaseMonitorEntry 7 }
st4PhaseActivePower OBJECT-TYPE
SYNTAX Integer32(-1..25000)
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured active power on the phase in Watts."
::= { st4PhaseMonitorEntry 8 }
st4PhaseApparentPower OBJECT-TYPE
SYNTAX Integer32(-1..25000)
UNITS "Volt-Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured apparent power on the phase in Volt-Amps."
::= { st4PhaseMonitorEntry 9 }
st4PhasePowerFactor OBJECT-TYPE
SYNTAX Integer32(-1..100)
UNITS "hundredths"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured power factor on the phase in hundredths."
::= { st4PhaseMonitorEntry 10 }
st4PhasePowerFactorStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the measured power factor on the phase."
::= { st4PhaseMonitorEntry 11 }
st4PhaseReactance OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
capacitive(1),
inductive(2),
resistive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the measured reactance of the phase."
::= { st4PhaseMonitorEntry 12 }
st4PhaseEnergy OBJECT-TYPE
SYNTAX Integer32(-1..2147483647)
UNITS "tenth Kilowatt-Hours"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total energy consumption of loads through the phase in tenth
Kilowatt-Hours."
::= { st4PhaseMonitorEntry 13 }
-- Phase Event Configuration Table
st4PhaseEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4PhaseEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Phase event configuration table."
::= { st4Phases 4 }
st4PhaseEventConfigEntry OBJECT-TYPE
SYNTAX St4PhaseEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular phase."
INDEX { st4UnitIndex, st4InputCordIndex, st4PhaseIndex }
::= { st4PhaseEventConfigTable 1 }
St4PhaseEventConfigEntry ::= SEQUENCE {
st4PhaseNotifications EventNotificationMethods,
st4PhaseVoltageLowAlarm Integer32,
st4PhaseVoltageLowWarning Integer32,
st4PhaseVoltageHighWarning Integer32,
st4PhaseVoltageHighAlarm Integer32,
st4PhasePowerFactorLowAlarm Integer32,
st4PhasePowerFactorLowWarning Integer32
}
st4PhaseNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for phase events."
::= { st4PhaseEventConfigEntry 1 }
st4PhaseVoltageLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..6000)
UNITS "tenth Volts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current low alarm threshold of the phase in tenth Volts."
::= { st4PhaseEventConfigEntry 2 }
st4PhaseVoltageLowWarning OBJECT-TYPE
SYNTAX Integer32(0..6000)
UNITS "tenth Volts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current low warning threshold of the phase in tenth Volts."
::= { st4PhaseEventConfigEntry 3 }
st4PhaseVoltageHighWarning OBJECT-TYPE
SYNTAX Integer32(0..6000)
UNITS "tenth Volts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current high warning threshold of the phase in tenth Volts."
::= { st4PhaseEventConfigEntry 4 }
st4PhaseVoltageHighAlarm OBJECT-TYPE
SYNTAX Integer32(0..6000)
UNITS "tenth Volts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current high alarm threshold of the phase in tenth Volts."
::= { st4PhaseEventConfigEntry 5 }
st4PhasePowerFactorLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "hundredths"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low power factor alarm threshold of the phase in hundredths."
::= { st4PhaseEventConfigEntry 6 }
st4PhasePowerFactorLowWarning OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "hundredths"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low power factor warning threshold of the phase in
hundredths."
::= { st4PhaseEventConfigEntry 7 }
-- Over-Current Protectors
st4OverCurrentProtectors OBJECT IDENTIFIER ::= { st4Objects 6 }
-- Over-Current Protector Common Configuration
st4OcpCommonConfig OBJECT IDENTIFIER ::= { st4OverCurrentProtectors 1 }
-- Over-Current Protector Configuration Table
st4OcpConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4OcpConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Over-current protector configuration table."
::= { st4OverCurrentProtectors 2 }
st4OcpConfigEntry OBJECT-TYPE
SYNTAX St4OcpConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular over-current protector."
INDEX { st4UnitIndex, st4InputCordIndex, st4OcpIndex }
::= { st4OcpConfigTable 1 }
St4OcpConfigEntry ::= SEQUENCE {
st4OcpIndex Integer32,
st4OcpID DisplayString,
st4OcpLabel DisplayString,
st4OcpType INTEGER,
st4OcpCurrentCapacity Integer32,
st4OcpCurrentCapacityMax Integer32,
st4OcpBranchCount Integer32,
st4OcpOutletCount Integer32
}
st4OcpIndex OBJECT-TYPE
SYNTAX Integer32(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Over-current protector index."
::= { st4OcpConfigEntry 1 }
st4OcpID OBJECT-TYPE
SYNTAX DisplayString(SIZE(3..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the over-current protector. Format=AAN[N]."
::= { st4OcpConfigEntry 2 }
st4OcpLabel OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system label assigned to the over-current protector for
identification."
::= { st4OcpConfigEntry 4 }
st4OcpType OBJECT-TYPE
SYNTAX INTEGER {
fuse(0),
breaker(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of over-current protector."
::= { st4OcpConfigEntry 6 }
st4OcpCurrentCapacity OBJECT-TYPE
SYNTAX Integer32(0..125)
UNITS "Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The user-configured current capacity of the over-current protector
in Amps."
::= { st4OcpConfigEntry 7 }
st4OcpCurrentCapacityMax OBJECT-TYPE
SYNTAX Integer32(0..125)
UNITS "Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The factory-set maximum allowed for the user-configured current
capacity of the over-current protector in Amps."
::= { st4OcpConfigEntry 8 }
st4OcpBranchCount OBJECT-TYPE
SYNTAX Integer32(0..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of branches downstream from the over-current
protector."
::= { st4OcpConfigEntry 20 }
st4OcpOutletCount OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outlets powered from the over-current protector."
::= { st4OcpConfigEntry 21 }
-- Over-Current Protector Monitor Table
st4OcpMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4OcpMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Over-current protector monitor table."
::= { st4OverCurrentProtectors 3 }
st4OcpMonitorEntry OBJECT-TYPE
SYNTAX St4OcpMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular over-current protector."
INDEX { st4UnitIndex, st4InputCordIndex, st4OcpIndex }
::= { st4OcpMonitorTable 1 }
St4OcpMonitorEntry ::= SEQUENCE {
st4OcpStatus DeviceStatus
}
st4OcpStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the over-current protector."
::= { st4OcpMonitorEntry 1 }
-- Over-Current Protector Event Configuration Table
st4OcpEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4OcpEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Over-current protector event configuration table."
::= { st4OverCurrentProtectors 4 }
st4OcpEventConfigEntry OBJECT-TYPE
SYNTAX St4OcpEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular over-current
protector."
INDEX { st4UnitIndex, st4InputCordIndex, st4OcpIndex }
::= { st4OcpEventConfigTable 1 }
St4OcpEventConfigEntry ::= SEQUENCE {
st4OcpNotifications EventNotificationMethods
}
st4OcpNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for over-current protector
events."
::= { st4OcpEventConfigEntry 1 }
-- Branches
st4Branches OBJECT IDENTIFIER ::= { st4Objects 7 }
-- Branch Common Configuration
st4BranchCommonConfig OBJECT IDENTIFIER ::= { st4Branches 1 }
st4BranchCurrentHysteresis OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current hysteresis of the branch in tenth Amps."
::= { st4BranchCommonConfig 1 }
-- Branch Configuration Table
st4BranchConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4BranchConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Branch configuration table."
::= { st4Branches 2 }
st4BranchConfigEntry OBJECT-TYPE
SYNTAX St4BranchConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular branch."
INDEX { st4UnitIndex, st4InputCordIndex, st4BranchIndex }
::= { st4BranchConfigTable 1 }
St4BranchConfigEntry ::= SEQUENCE {
st4BranchIndex Integer32,
st4BranchID DisplayString,
st4BranchLabel DisplayString,
st4BranchCurrentCapacity Integer32,
st4BranchPhaseID DisplayString,
st4BranchOcpID DisplayString,
st4BranchOutletCount Integer32
}
st4BranchIndex OBJECT-TYPE
SYNTAX Integer32(1..64)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Branch index."
::= { st4BranchConfigEntry 1 }
st4BranchID OBJECT-TYPE
SYNTAX DisplayString(SIZE(3..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the branch. Format=AAN[N]."
::= { st4BranchConfigEntry 2 }
st4BranchLabel OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system label assigned to the branch for identification."
::= { st4BranchConfigEntry 4 }
st4BranchCurrentCapacity OBJECT-TYPE
SYNTAX Integer32(0..125)
UNITS "Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current capacity of the branch in Amps."
::= { st4BranchConfigEntry 6 }
st4BranchPhaseID OBJECT-TYPE
SYNTAX DisplayString(SIZE(3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the phase powering this branch.
Format=AAN."
::= { st4BranchConfigEntry 20 }
st4BranchOcpID OBJECT-TYPE
SYNTAX DisplayString(SIZE(3..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the over-current protector powering this
outlet. Format=AAN[N]."
::= { st4BranchConfigEntry 21 }
st4BranchOutletCount OBJECT-TYPE
SYNTAX Integer32(0..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of outlets powered from the branch."
::= { st4BranchConfigEntry 30 }
-- Branch Monitor Table
st4BranchMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4BranchMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Branch monitor table."
::= { st4Branches 3 }
st4BranchMonitorEntry OBJECT-TYPE
SYNTAX St4BranchMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular branch."
INDEX { st4UnitIndex, st4InputCordIndex, st4BranchIndex }
::= { st4BranchMonitorTable 1 }
St4BranchMonitorEntry ::= SEQUENCE {
st4BranchState DeviceState,
st4BranchStatus DeviceStatus,
st4BranchCurrent Integer32,
st4BranchCurrentStatus DeviceStatus,
st4BranchCurrentUtilized Integer32
}
st4BranchState OBJECT-TYPE
SYNTAX DeviceState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The on/off state of the branch."
::= { st4BranchMonitorEntry 1 }
st4BranchStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the branch."
::= { st4BranchMonitorEntry 2 }
st4BranchCurrent OBJECT-TYPE
SYNTAX Integer32(-1..12500)
UNITS "hundredth Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured current on the branch in hundredth Amps."
::= { st4BranchMonitorEntry 3 }
st4BranchCurrentStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the measured current on the branch."
::= { st4BranchMonitorEntry 4 }
st4BranchCurrentUtilized OBJECT-TYPE
SYNTAX Integer32(-1..1200)
UNITS "tenth percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of the branch current capacity used in tenth percent."
::= { st4BranchMonitorEntry 5 }
-- Branch Event Configuration Table
st4BranchEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4BranchEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Branch event configuration table."
::= { st4Branches 4 }
st4BranchEventConfigEntry OBJECT-TYPE
SYNTAX St4BranchEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular branch."
INDEX { st4UnitIndex, st4InputCordIndex, st4BranchIndex }
::= { st4BranchEventConfigTable 1 }
St4BranchEventConfigEntry ::= SEQUENCE {
st4BranchNotifications EventNotificationMethods,
st4BranchCurrentLowAlarm Integer32,
st4BranchCurrentLowWarning Integer32,
st4BranchCurrentHighWarning Integer32,
st4BranchCurrentHighAlarm Integer32
}
st4BranchNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for branch events."
::= { st4BranchEventConfigEntry 1 }
st4BranchCurrentLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..1250)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current low alarm threshold of the branch in tenth Amps."
::= { st4BranchEventConfigEntry 2 }
st4BranchCurrentLowWarning OBJECT-TYPE
SYNTAX Integer32(0..1250)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current low warning threshold of the branch in tenth Amps."
::= { st4BranchEventConfigEntry 3 }
st4BranchCurrentHighWarning OBJECT-TYPE
SYNTAX Integer32(0..1250)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current high warning threshold of the branch in tenth Amps."
::= { st4BranchEventConfigEntry 4 }
st4BranchCurrentHighAlarm OBJECT-TYPE
SYNTAX Integer32(0..1250)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current high alarm threshold of the branch in tenth Amps."
::= { st4BranchEventConfigEntry 5 }
-- Outlets
st4Outlets OBJECT IDENTIFIER ::= { st4Objects 8 }
-- Outlet Common Configuration
st4OutletCommonConfig OBJECT IDENTIFIER ::= { st4Outlets 1 }
st4OutletCurrentHysteresis OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current hysteresis of the outlet in tenth Amps."
::= { st4OutletCommonConfig 1 }
st4OutletActivePowerHysteresis OBJECT-TYPE
SYNTAX Integer32(0..1000)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power hysteresis of the outlet in Watts."
::= { st4OutletCommonConfig 2 }
st4OutletPowerFactorHysteresis OBJECT-TYPE
SYNTAX Integer32(0..20)
UNITS "hundredths"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power factor hysteresis of the outlet in hundredths."
::= { st4OutletCommonConfig 3 }
st4OutletSequenceInterval OBJECT-TYPE
SYNTAX Integer32(0..15)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The power-on sequencing interval for all outlets in seconds."
::= { st4OutletCommonConfig 10 }
st4OutletRebootDelay OBJECT-TYPE
SYNTAX Integer32(5..600)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The reboot delay for all outlets in seconds."
::= { st4OutletCommonConfig 11 }
st4OutletStateChangeLogging OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enables or disables informational Outlet State Change event
logging."
::= { st4OutletCommonConfig 12 }
-- Outlet Configuration Table
st4OutletConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4OutletConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Outlet configuration table."
::= { st4Outlets 2 }
st4OutletConfigEntry OBJECT-TYPE
SYNTAX St4OutletConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular outlet."
INDEX { st4UnitIndex, st4InputCordIndex, st4OutletIndex }
::= { st4OutletConfigTable 1 }
St4OutletConfigEntry ::= SEQUENCE {
st4OutletIndex Integer32,
st4OutletID DisplayString,
st4OutletName DisplayString,
st4OutletCapabilities BITS,
st4OutletSocketType DisplayString,
st4OutletCurrentCapacity Integer32,
st4OutletPowerCapacity Integer32,
st4OutletWakeupState INTEGER,
st4OutletPostOnDelay Integer32,
st4OutletPhaseID DisplayString,
st4OutletOcpID DisplayString,
st4OutletBranchID DisplayString
}
st4OutletIndex OBJECT-TYPE
SYNTAX Integer32(1..128)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Outlet index."
::= { st4OutletConfigEntry 1 }
st4OutletID OBJECT-TYPE
SYNTAX DisplayString(SIZE(3..5))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the outlet. Format=AAN[N[N]]."
::= { st4OutletConfigEntry 2 }
st4OutletName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the outlet."
::= { st4OutletConfigEntry 3 }
st4OutletCapabilities OBJECT-TYPE
SYNTAX BITS {
switched(0), -- outlet supports power control
pops(1) -- outlet has pops
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The capabilities of the outlet."
::= { st4OutletConfigEntry 5 }
st4OutletSocketType OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The socket type of the outlet."
::= { st4OutletConfigEntry 6 }
st4OutletCurrentCapacity OBJECT-TYPE
SYNTAX Integer32(0..125)
UNITS "Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current capacity of the outlet in Amps."
::= { st4OutletConfigEntry 7 }
st4OutletPowerCapacity OBJECT-TYPE
SYNTAX Integer32(0..10000)
UNITS "Volt-Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The power capacity of the outlet in Volt-Amps. For DC products,
this is identical to power capacity in Watts."
::= { st4OutletConfigEntry 8 }
st4OutletWakeupState OBJECT-TYPE
SYNTAX INTEGER {
on(0),
off(1),
last(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The wakeup state of the outlet."
::= { st4OutletConfigEntry 20 }
st4OutletPostOnDelay OBJECT-TYPE
SYNTAX Integer32(0..900)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The post-on delay of the outlet in seconds."
::= { st4OutletConfigEntry 21 }
st4OutletPhaseID OBJECT-TYPE
SYNTAX DisplayString(SIZE(3))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the phase powering this outlet.
Format=AAN."
::= { st4OutletConfigEntry 30 }
st4OutletOcpID OBJECT-TYPE
SYNTAX DisplayString(SIZE(3..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the over-current protector powering this
outlet. Format=AAN[N]."
::= { st4OutletConfigEntry 31 }
st4OutletBranchID OBJECT-TYPE
SYNTAX DisplayString(SIZE(3..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the branch powering this outlet.
Format=AAN[N]."
::= { st4OutletConfigEntry 32 }
-- Outlet Monitor Table
st4OutletMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4OutletMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Outlet monitor table."
::= { st4Outlets 3 }
st4OutletMonitorEntry OBJECT-TYPE
SYNTAX St4OutletMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular outlet."
INDEX { st4UnitIndex, st4InputCordIndex, st4OutletIndex }
::= { st4OutletMonitorTable 1 }
St4OutletMonitorEntry ::= SEQUENCE {
st4OutletState DeviceState,
st4OutletStatus DeviceStatus,
st4OutletCurrent Integer32,
st4OutletCurrentStatus DeviceStatus,
st4OutletCurrentUtilized Integer32,
st4OutletVoltage Integer32,
st4OutletActivePower Integer32,
st4OutletActivePowerStatus DeviceStatus,
st4OutletApparentPower Integer32,
st4OutletPowerFactor Integer32,
st4OutletPowerFactorStatus DeviceStatus,
st4OutletCurrentCrestFactor Integer32,
st4OutletReactance INTEGER,
st4OutletEnergy Integer32
}
st4OutletState OBJECT-TYPE
SYNTAX DeviceState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The on/off state of the outlet."
::= { st4OutletMonitorEntry 1 }
st4OutletStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the outlet."
::= { st4OutletMonitorEntry 2 }
st4OutletCurrent OBJECT-TYPE
SYNTAX Integer32(-1..12500)
UNITS "hundredth Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured current on the outlet in hundredth Amps."
::= { st4OutletMonitorEntry 3 }
st4OutletCurrentStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the measured current on the outlet."
::= { st4OutletMonitorEntry 4 }
st4OutletCurrentUtilized OBJECT-TYPE
SYNTAX Integer32(-1..1200)
UNITS "tenth percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of the outlet current capacity used in tenth percent."
::= { st4OutletMonitorEntry 5 }
st4OutletVoltage OBJECT-TYPE
SYNTAX Integer32(-1..6000)
UNITS "tenth Volts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured voltage of the outlet in tenth Volts."
::= { st4OutletMonitorEntry 6 }
st4OutletActivePower OBJECT-TYPE
SYNTAX Integer32(-1..10000)
UNITS "Watts"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured active power of the outlet in Watts."
::= { st4OutletMonitorEntry 7 }
st4OutletActivePowerStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the measured active power of the outlet."
::= { st4OutletMonitorEntry 8 }
st4OutletApparentPower OBJECT-TYPE
SYNTAX Integer32(-1..10000)
UNITS "Volt-Amps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured apparent power of the outlet in Volt-Amps."
::= { st4OutletMonitorEntry 9 }
st4OutletPowerFactor OBJECT-TYPE
SYNTAX Integer32(-1..100)
UNITS "hundredths"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured power factor of the outlet in hundredths."
::= { st4OutletMonitorEntry 10 }
st4OutletPowerFactorStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the measured power factor of the outlet."
::= { st4OutletMonitorEntry 11 }
st4OutletCurrentCrestFactor OBJECT-TYPE
SYNTAX Integer32(-1..250)
UNITS "tenths"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured crest factor of the outlet in tenths."
::= { st4OutletMonitorEntry 12 }
st4OutletReactance OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
capacitive(1),
inductive(2),
resistive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the measured reactance of the outlet."
::= { st4OutletMonitorEntry 13 }
st4OutletEnergy OBJECT-TYPE
SYNTAX Integer32(-1..2147483647)
UNITS "Watt-Hours"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total energy consumption of the device plugged into the outlet
in Watt-Hours."
::= { st4OutletMonitorEntry 14 }
-- Outlet Event Configuration Table
st4OutletEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4OutletEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Outlet event configuration table."
::= { st4Outlets 4 }
st4OutletEventConfigEntry OBJECT-TYPE
SYNTAX St4OutletEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular outlet."
INDEX { st4UnitIndex, st4InputCordIndex, st4OutletIndex }
::= { st4OutletEventConfigTable 1 }
St4OutletEventConfigEntry ::= SEQUENCE {
st4OutletNotifications EventNotificationMethods,
st4OutletCurrentLowAlarm Integer32,
st4OutletCurrentLowWarning Integer32,
st4OutletCurrentHighWarning Integer32,
st4OutletCurrentHighAlarm Integer32,
st4OutletActivePowerLowAlarm Integer32,
st4OutletActivePowerLowWarning Integer32,
st4OutletActivePowerHighWarning Integer32,
st4OutletActivePowerHighAlarm Integer32,
st4OutletPowerFactorLowAlarm Integer32,
st4OutletPowerFactorLowWarning Integer32
}
st4OutletNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for outlet events."
::= { st4OutletEventConfigEntry 1 }
st4OutletCurrentLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..1250)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current low alarm threshold of the outlet in tenth Amps."
::= { st4OutletEventConfigEntry 2 }
st4OutletCurrentLowWarning OBJECT-TYPE
SYNTAX Integer32(0..1250)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current low warning threshold of the outlet in tenth Amps."
::= { st4OutletEventConfigEntry 3 }
st4OutletCurrentHighWarning OBJECT-TYPE
SYNTAX Integer32(0..1250)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current high warning threshold of the outlet in tenth Amps."
::= { st4OutletEventConfigEntry 4 }
st4OutletCurrentHighAlarm OBJECT-TYPE
SYNTAX Integer32(0..1250)
UNITS "tenth Amps"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current high alarm threshold of the outlet in tenth Amps."
::= { st4OutletEventConfigEntry 5 }
st4OutletActivePowerLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..10000)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active power low alarm threshold of the outlet in Watts."
::= { st4OutletEventConfigEntry 6 }
st4OutletActivePowerLowWarning OBJECT-TYPE
SYNTAX Integer32(0..10000)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active power low warning threshold of the outlet in Watts."
::= { st4OutletEventConfigEntry 7 }
st4OutletActivePowerHighWarning OBJECT-TYPE
SYNTAX Integer32(0..10000)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active power high warning threshold of the outlet in Watts."
::= { st4OutletEventConfigEntry 8 }
st4OutletActivePowerHighAlarm OBJECT-TYPE
SYNTAX Integer32(0..10000)
UNITS "Watts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The active power high alarm threshold of the outlet in Watts."
::= { st4OutletEventConfigEntry 9 }
st4OutletPowerFactorLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "hundredths"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low power factor alarm threshold of the outlet in hundredths."
::= { st4OutletEventConfigEntry 10 }
st4OutletPowerFactorLowWarning OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "hundredths"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low power factor warning threshold of the outlet in
hundredths."
::= { st4OutletEventConfigEntry 11 }
-- Outlet Control Table
st4OutletControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4OutletControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Outlet control table."
::= { st4Outlets 5 }
st4OutletControlEntry OBJECT-TYPE
SYNTAX St4OutletControlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects for control of a particular outlet."
INDEX { st4UnitIndex, st4InputCordIndex, st4OutletIndex }
::= { st4OutletControlTable 1 }
St4OutletControlEntry ::= SEQUENCE {
st4OutletControlState INTEGER,
st4OutletControlAction INTEGER
}
st4OutletControlState OBJECT-TYPE
SYNTAX INTEGER {
notSet(0), -- outlet state is unknown
fixedOn(1), -- outlet is uncontrolled (assumed on)
idleOff(2), -- outlet has defaulted to off state
idleOn(3), -- outlet has defaulted to on state
wakeOff(4), -- outlet has been set to off by wakeup
wakeOn(5), -- outlet has been set to on by wakeup
ocpOff(6), -- outlet is off due to OCP failure
ocpOn(7), -- outlet had OCP power loss
pendOn(8), -- outlet is off, but will be turning on
pendOff(9), -- outlet is on, but will be turning off
off(10), -- outlet was turned off by user
on(11), -- outlet was turned on by user or reboot event
reboot(12), -- outlet is preparing to turn on
shutdown(13), -- outlet is preparing to turn off
lockedOff(14), -- outlet was locked off by admin
lockedOn(15), -- outlet was locked on by admin
eventOff(16), -- outlet was turned off by an event
eventOn(17), -- outlet was turned on by an event
eventReboot(18), -- outlet rebooting due to an event
eventShutdown(19) -- outlet shutting down due to an event
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The control state of the outlet."
::= { st4OutletControlEntry 1 }
st4OutletControlAction OBJECT-TYPE
SYNTAX INTEGER {
none(0),
on(1),
off(2),
reboot(3),
queueOn(4),
queueOff(5),
queueReboot(6)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An action to change the control state of the outlet, or to queue
an action."
::= { st4OutletControlEntry 2 }
-- Outlet Common Control
st4OutletCommonControl OBJECT IDENTIFIER ::= { st4Outlets 6 }
st4OutletQueueControl OBJECT-TYPE
SYNTAX INTEGER {
clear(0),
commit(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An action to clear or commit queued outlet control actions. A
read of this object returns clear(0) if queue is empty, and
commit(1) if the queue is not empty."
::= { st4OutletCommonControl 1 }
-- Temperature Sensors
st4TemperatureSensors OBJECT IDENTIFIER ::= { st4Objects 9 }
-- Temperature Sensor Common Configuration
st4TempSensorCommonConfig OBJECT IDENTIFIER ::= { st4TemperatureSensors 1 }
st4TempSensorHysteresis OBJECT-TYPE
SYNTAX Integer32(0..54)
UNITS "degrees"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The temperature hysteresis of the sensor in degrees, using the
scale selected by st4TempSensorScale."
::= { st4TempSensorCommonConfig 1 }
st4TempSensorScale OBJECT-TYPE
SYNTAX INTEGER {
celsius(0),
fahrenheit(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The current scale used for all temperature values."
::= { st4TempSensorCommonConfig 10 }
-- Temperature Sensor Configuration Table
st4TempSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4TempSensorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Temperature sensor configuration table."
::= { st4TemperatureSensors 2 }
st4TempSensorConfigEntry OBJECT-TYPE
SYNTAX St4TempSensorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular temperature sensor."
INDEX { st4UnitIndex, st4TempSensorIndex }
::= { st4TempSensorConfigTable 1 }
St4TempSensorConfigEntry ::= SEQUENCE {
st4TempSensorIndex Integer32,
st4TempSensorID DisplayString,
st4TempSensorName DisplayString,
st4TempSensorValueMin Integer32,
st4TempSensorValueMax Integer32
}
st4TempSensorIndex OBJECT-TYPE
SYNTAX Integer32(0..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Temperature sensor index."
::= { st4TempSensorConfigEntry 1 }
st4TempSensorID OBJECT-TYPE
SYNTAX DisplayString(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the temperature sensor. Format=AN."
::= { st4TempSensorConfigEntry 2 }
st4TempSensorName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the temperature sensor."
::= { st4TempSensorConfigEntry 3 }
st4TempSensorValueMin OBJECT-TYPE
SYNTAX Integer32(-40..253)
UNITS "degrees"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum temperature limit of the sensor in degrees, using the
scale selected by st4TempSensorScale."
::= { st4TempSensorConfigEntry 4 }
st4TempSensorValueMax OBJECT-TYPE
SYNTAX Integer32(-40..253)
UNITS "degrees"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum temperature limit of the sensor in degrees, using the
scale selected by st4TempSensorScale."
::= { st4TempSensorConfigEntry 5 }
-- Temperature Sensor Monitor Table
st4TempSensorMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4TempSensorMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Temperature sensor monitor table."
::= { st4TemperatureSensors 3 }
st4TempSensorMonitorEntry OBJECT-TYPE
SYNTAX St4TempSensorMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular temperature sensor."
INDEX { st4UnitIndex, st4TempSensorIndex }
::= { st4TempSensorMonitorTable 1 }
St4TempSensorMonitorEntry ::= SEQUENCE {
st4TempSensorValue Integer32,
st4TempSensorStatus DeviceStatus
}
st4TempSensorValue OBJECT-TYPE
SYNTAX Integer32(-410..2540)
UNITS "tenth degrees"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured temperature on the sensor in tenth degrees using the
scale selected by st4TempSensorScale. -410 means the temperature
reading is invalid."
::= { st4TempSensorMonitorEntry 1 }
st4TempSensorStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the temperature sensor."
::= { st4TempSensorMonitorEntry 2 }
-- Temperature Sensor Event Configuration Table
st4TempSensorEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4TempSensorEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Temperature sensor event configuration table."
::= { st4TemperatureSensors 4 }
st4TempSensorEventConfigEntry OBJECT-TYPE
SYNTAX St4TempSensorEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular temperature sensor."
INDEX { st4UnitIndex, st4TempSensorIndex }
::= { st4TempSensorEventConfigTable 1 }
St4TempSensorEventConfigEntry ::= SEQUENCE {
st4TempSensorNotifications EventNotificationMethods,
st4TempSensorLowAlarm Integer32,
st4TempSensorLowWarning Integer32,
st4TempSensorHighWarning Integer32,
st4TempSensorHighAlarm Integer32
}
st4TempSensorNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for temperature sensor events."
::= { st4TempSensorEventConfigEntry 1 }
st4TempSensorLowAlarm OBJECT-TYPE
SYNTAX Integer32(-40..253)
UNITS "degrees"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low alarm threshold of the temperature sensor in degrees."
::= { st4TempSensorEventConfigEntry 2 }
st4TempSensorLowWarning OBJECT-TYPE
SYNTAX Integer32(-40..253)
UNITS "degrees"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low warning threshold of the temperature sensor in degrees."
::= { st4TempSensorEventConfigEntry 3 }
st4TempSensorHighWarning OBJECT-TYPE
SYNTAX Integer32(-40..253)
UNITS "degrees"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The high warning threshold of the temperature sensor in degrees."
::= { st4TempSensorEventConfigEntry 4 }
st4TempSensorHighAlarm OBJECT-TYPE
SYNTAX Integer32(-40..253)
UNITS "degrees"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The high alarm threshold of the temperature sensor in degrees."
::= { st4TempSensorEventConfigEntry 5 }
-- Humidity Sensors
st4HumiditySensors OBJECT IDENTIFIER ::= { st4Objects 10 }
-- Humidity Sensor Common Configuration
st4HumidSensorCommonConfig OBJECT IDENTIFIER ::= { st4HumiditySensors 1 }
st4HumidSensorHysteresis OBJECT-TYPE
SYNTAX Integer32(0..20)
UNITS "percentage relative humidity"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The humidity hysteresis of the sensor in percent relative
humidity."
::= { st4HumidSensorCommonConfig 1 }
-- Humidity Sensor Configuration Table
st4HumidSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4HumidSensorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Humidity sensor configuration table."
::= { st4HumiditySensors 2 }
st4HumidSensorConfigEntry OBJECT-TYPE
SYNTAX St4HumidSensorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular humidity sensor."
INDEX { st4UnitIndex, st4HumidSensorIndex }
::= { st4HumidSensorConfigTable 1 }
St4HumidSensorConfigEntry ::= SEQUENCE {
st4HumidSensorIndex Integer32,
st4HumidSensorID DisplayString,
st4HumidSensorName DisplayString
}
st4HumidSensorIndex OBJECT-TYPE
SYNTAX Integer32(0..2)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Humidity sensor index."
::= { st4HumidSensorConfigEntry 1 }
st4HumidSensorID OBJECT-TYPE
SYNTAX DisplayString(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the humidity sensor. Format=AN."
::= { st4HumidSensorConfigEntry 2 }
st4HumidSensorName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the humidity sensor."
::= { st4HumidSensorConfigEntry 3 }
-- Humidity Sensor Monitor Table
st4HumidSensorMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4HumidSensorMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Humidity sensor monitor table."
::= { st4HumiditySensors 3 }
st4HumidSensorMonitorEntry OBJECT-TYPE
SYNTAX St4HumidSensorMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular humidity sensor."
INDEX { st4UnitIndex, st4HumidSensorIndex }
::= { st4HumidSensorMonitorTable 1 }
St4HumidSensorMonitorEntry ::= SEQUENCE {
st4HumidSensorValue Integer32,
st4HumidSensorStatus DeviceStatus
}
st4HumidSensorValue OBJECT-TYPE
SYNTAX Integer32(-1..100)
UNITS "percentage relative humidity"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured humidity on the sensor in percentage relative
humidity."
::= { st4HumidSensorMonitorEntry 1 }
st4HumidSensorStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the humidity sensor."
::= { st4HumidSensorMonitorEntry 2 }
-- Humidity Sensor Event Configuration Table
st4HumidSensorEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4HumidSensorEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Humidity sensor event configuration table."
::= { st4HumiditySensors 4 }
st4HumidSensorEventConfigEntry OBJECT-TYPE
SYNTAX St4HumidSensorEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular humidity sensor."
INDEX { st4UnitIndex, st4HumidSensorIndex }
::= { st4HumidSensorEventConfigTable 1 }
St4HumidSensorEventConfigEntry ::= SEQUENCE {
st4HumidSensorNotifications EventNotificationMethods,
st4HumidSensorLowAlarm Integer32,
st4HumidSensorLowWarning Integer32,
st4HumidSensorHighWarning Integer32,
st4HumidSensorHighAlarm Integer32
}
st4HumidSensorNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for humidity sensor events."
::= { st4HumidSensorEventConfigEntry 1 }
st4HumidSensorLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "percentage relative humidity"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low alarm threshold of the humidity sensor in percentage
relative humidity."
::= { st4HumidSensorEventConfigEntry 2 }
st4HumidSensorLowWarning OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "percentage relative humidity"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low warning threshold of the humidity sensor in percentage
relative humidity."
::= { st4HumidSensorEventConfigEntry 3 }
st4HumidSensorHighWarning OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "percentage relative humidity"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The high warning threshold of the humidity sensor in percentage
relative humidity."
::= { st4HumidSensorEventConfigEntry 4 }
st4HumidSensorHighAlarm OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "percentage relative humidity"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The high alarm threshold of the humidity sensor in percentage
relative humidity."
::= { st4HumidSensorEventConfigEntry 5 }
-- Water Sensors
st4WaterSensors OBJECT IDENTIFIER ::= { st4Objects 11 }
-- Water Sensor Common Configuration
st4WaterSensorCommonConfig OBJECT IDENTIFIER ::= { st4WaterSensors 1 }
-- Water Sensor Configuration Table
st4WaterSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4WaterSensorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Water sensor configuration table."
::= { st4WaterSensors 2 }
st4WaterSensorConfigEntry OBJECT-TYPE
SYNTAX St4WaterSensorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular water sensor."
INDEX { st4UnitIndex, st4WaterSensorIndex }
::= { st4WaterSensorConfigTable 1 }
St4WaterSensorConfigEntry ::= SEQUENCE {
st4WaterSensorIndex Integer32,
st4WaterSensorID DisplayString,
st4WaterSensorName DisplayString
}
st4WaterSensorIndex OBJECT-TYPE
SYNTAX Integer32(0..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Water sensor index."
::= { st4WaterSensorConfigEntry 1 }
st4WaterSensorID OBJECT-TYPE
SYNTAX DisplayString(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the water sensor. Format=AN."
::= { st4WaterSensorConfigEntry 2 }
st4WaterSensorName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the water sensor."
::= { st4WaterSensorConfigEntry 3 }
-- Water Sensor Monitor Table
st4WaterSensorMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4WaterSensorMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Water sensor monitor table."
::= { st4WaterSensors 3 }
st4WaterSensorMonitorEntry OBJECT-TYPE
SYNTAX St4WaterSensorMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular water sensor."
INDEX { st4UnitIndex, st4WaterSensorIndex }
::= { st4WaterSensorMonitorTable 1 }
St4WaterSensorMonitorEntry ::= SEQUENCE {
st4WaterSensorStatus DeviceStatus
}
st4WaterSensorStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the water sensor."
::= { st4WaterSensorMonitorEntry 1 }
-- Water Sensor Event Configuration Table
st4WaterSensorEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4WaterSensorEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Water sensor event configuration table."
::= { st4WaterSensors 4 }
st4WaterSensorEventConfigEntry OBJECT-TYPE
SYNTAX St4WaterSensorEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular water sensor."
INDEX { st4UnitIndex, st4WaterSensorIndex }
::= { st4WaterSensorEventConfigTable 1 }
St4WaterSensorEventConfigEntry ::= SEQUENCE {
st4WaterSensorNotifications EventNotificationMethods
}
st4WaterSensorNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for water sensor events."
::= { st4WaterSensorEventConfigEntry 1 }
-- Contact Closures Sensors
st4ContactClosureSensors OBJECT IDENTIFIER ::= { st4Objects 12 }
-- Contact Closure Sensor Common Configuration
st4CcSensorCommonConfig OBJECT IDENTIFIER ::= { st4ContactClosureSensors 1 }
-- Contact Closure Sensor Configuration Table
st4CcSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4CcSensorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contact closure sensor configuration table."
::= { st4ContactClosureSensors 2 }
st4CcSensorConfigEntry OBJECT-TYPE
SYNTAX St4CcSensorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular contact closure sensor."
INDEX { st4UnitIndex, st4CcSensorIndex }
::= { st4CcSensorConfigTable 1 }
St4CcSensorConfigEntry ::= SEQUENCE {
st4CcSensorIndex Integer32,
st4CcSensorID DisplayString,
st4CcSensorName DisplayString
}
st4CcSensorIndex OBJECT-TYPE
SYNTAX Integer32(0..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contact closure sensor index."
::= { st4CcSensorConfigEntry 1 }
st4CcSensorID OBJECT-TYPE
SYNTAX DisplayString(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the contact closure sensor. Format=AN."
::= { st4CcSensorConfigEntry 2 }
st4CcSensorName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the contact closure sensor."
::= { st4CcSensorConfigEntry 3 }
-- Contact Closure Sensor Monitor Table
st4CcSensorMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4CcSensorMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contact closure sensor monitor table."
::= { st4ContactClosureSensors 3 }
st4CcSensorMonitorEntry OBJECT-TYPE
SYNTAX St4CcSensorMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular contact closure sensor."
INDEX { st4UnitIndex, st4CcSensorIndex }
::= { st4CcSensorMonitorTable 1 }
St4CcSensorMonitorEntry ::= SEQUENCE {
st4CcSensorStatus DeviceStatus
}
st4CcSensorStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the contact closure."
::= { st4CcSensorMonitorEntry 1 }
-- Contact Closure Sensor Event Configuration Table
st4CcSensorEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4CcSensorEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contact closure sensor event configuration table."
::= { st4ContactClosureSensors 4 }
st4CcSensorEventConfigEntry OBJECT-TYPE
SYNTAX St4CcSensorEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular contact closure
sensor."
INDEX { st4UnitIndex, st4CcSensorIndex }
::= { st4CcSensorEventConfigTable 1 }
St4CcSensorEventConfigEntry ::= SEQUENCE {
st4CcSensorNotifications EventNotificationMethods
}
st4CcSensorNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for contact closure sensor
events."
::= { st4CcSensorEventConfigEntry 1 }
-- Analog-to-Digital Converter Sensors
st4AnalogToDigitalConvSensors OBJECT IDENTIFIER ::= { st4Objects 13 }
-- Analog-to-Digital Converter Sensor Common Configuration
st4AdcSensorCommonConfig OBJECT IDENTIFIER ::= { st4AnalogToDigitalConvSensors 1 }
st4AdcSensorHysteresis OBJECT-TYPE
SYNTAX Integer32(0..20)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 8-bit count hysteresis of the analog-to-digital converter
sensor."
::= { st4AdcSensorCommonConfig 1 }
-- Analog-to-Digital Converter Sensor Configuration Table
st4AdcSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4AdcSensorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Analog-to-digital converter sensor configuration table."
::= { st4AnalogToDigitalConvSensors 2 }
st4AdcSensorConfigEntry OBJECT-TYPE
SYNTAX St4AdcSensorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular analog-to-digital
converter sensor."
INDEX { st4UnitIndex, st4AdcSensorIndex }
::= { st4AdcSensorConfigTable 1 }
St4AdcSensorConfigEntry ::= SEQUENCE {
st4AdcSensorIndex Integer32,
st4AdcSensorID DisplayString,
st4AdcSensorName DisplayString
}
st4AdcSensorIndex OBJECT-TYPE
SYNTAX Integer32(0..1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Analog-to-digital converter sensor index."
::= { st4AdcSensorConfigEntry 1 }
st4AdcSensorID OBJECT-TYPE
SYNTAX DisplayString(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the analog-to-digital converter sensor.
Format=AN."
::= { st4AdcSensorConfigEntry 2 }
st4AdcSensorName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the analog-to-digital converter sensor."
::= { st4AdcSensorConfigEntry 3 }
-- Analog-to-Digital Converter Sensor Monitor Table
st4AdcSensorMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4AdcSensorMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Analog-to-digital converter sensor monitor table."
::= { st4AnalogToDigitalConvSensors 3 }
st4AdcSensorMonitorEntry OBJECT-TYPE
SYNTAX St4AdcSensorMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular analog-to-digital converter
sensor."
INDEX { st4UnitIndex, st4AdcSensorIndex }
::= { st4AdcSensorMonitorTable 1 }
St4AdcSensorMonitorEntry ::= SEQUENCE {
st4AdcSensorValue Integer32,
st4AdcSensorStatus DeviceStatus
}
st4AdcSensorValue OBJECT-TYPE
SYNTAX Integer32(-1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 8-bit value from the analog-to-digital converter sensor."
::= { st4AdcSensorMonitorEntry 1 }
st4AdcSensorStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the analog-to-digital converter sensor."
::= { st4AdcSensorMonitorEntry 2 }
-- Analog-to-Digital Converter Sensor Event Configuration Table
st4AdcSensorEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4AdcSensorEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Analog-to-digital converter sensor event configuration table."
::= { st4AnalogToDigitalConvSensors 4 }
st4AdcSensorEventConfigEntry OBJECT-TYPE
SYNTAX St4AdcSensorEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular
analog-to-digital converter sensor."
INDEX { st4UnitIndex, st4AdcSensorIndex }
::= { st4AdcSensorEventConfigTable 1 }
St4AdcSensorEventConfigEntry ::= SEQUENCE {
st4AdcSensorNotifications EventNotificationMethods,
st4AdcSensorLowAlarm Integer32,
st4AdcSensorLowWarning Integer32,
st4AdcSensorHighWarning Integer32,
st4AdcSensorHighAlarm Integer32
}
st4AdcSensorNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for analog-to-digital converter
sensor events."
::= { st4AdcSensorEventConfigEntry 1 }
st4AdcSensorLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 8-bit value for the low alarm threshold of the
analog-to-digital converter sensor."
::= { st4AdcSensorEventConfigEntry 2 }
st4AdcSensorLowWarning OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 8-bit value for the low warning threshold of the
analog-to-digital converter sensor."
::= { st4AdcSensorEventConfigEntry 3 }
st4AdcSensorHighWarning OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 8-bit value for the high warning threshold of the
analog-to-digital converter sensor."
::= { st4AdcSensorEventConfigEntry 4 }
st4AdcSensorHighAlarm OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The 8-bit value for the high alarm threshold of the
analog-to-digital converter sensor."
::= { st4AdcSensorEventConfigEntry 5 }
-- Fan Sensors
st4FanSensors OBJECT IDENTIFIER ::= { st4Objects 14 }
-- Fan Sensor Common Configuration
st4FanSensorCommonConfig OBJECT IDENTIFIER ::= { st4FanSensors 1 }
st4FanSensorHysteresis OBJECT-TYPE
SYNTAX Integer32(0..1200)
UNITS "rotations per minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The fan speed hysteresis of the sensor in rotations per minute."
::= { st4FanSensorCommonConfig 1 }
-- Fan Sensor Configuration Table
st4FanSensorConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4FanSensorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fan sensor configuration table."
::= { st4FanSensors 2 }
st4FanSensorConfigEntry OBJECT-TYPE
SYNTAX St4FanSensorConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Configuration objects for a particular fan sensor."
INDEX { st4UnitIndex, st4FanSensorIndex }
::= { st4FanSensorConfigTable 1 }
St4FanSensorConfigEntry ::= SEQUENCE {
st4FanSensorIndex Integer32,
st4FanSensorID DisplayString,
st4FanSensorName DisplayString
}
st4FanSensorIndex OBJECT-TYPE
SYNTAX Integer32(0..4)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fan sensor index."
::= { st4FanSensorConfigEntry 1 }
st4FanSensorID OBJECT-TYPE
SYNTAX DisplayString(SIZE(2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internal ID of the fan sensor. Format=AN."
::= { st4FanSensorConfigEntry 2 }
st4FanSensorName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The name of the fan sensor."
::= { st4FanSensorConfigEntry 3 }
-- Fan Sensor Monitor Table
st4FanSensorMonitorTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4FanSensorMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fan sensor monitor table."
::= { st4FanSensors 3 }
st4FanSensorMonitorEntry OBJECT-TYPE
SYNTAX St4FanSensorMonitorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Objects to monitor for a particular fan sensor."
INDEX { st4UnitIndex, st4FanSensorIndex }
::= { st4FanSensorMonitorTable 1 }
St4FanSensorMonitorEntry ::= SEQUENCE {
st4FanSensorValue Integer32,
st4FanSensorStatus DeviceStatus
}
st4FanSensorValue OBJECT-TYPE
SYNTAX Integer32(-1..15300)
UNITS "rotations per minute"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The measured fan speed of the sensor in rotations per minute."
::= { st4FanSensorMonitorEntry 1 }
st4FanSensorStatus OBJECT-TYPE
SYNTAX DeviceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the fan sensor."
::= { st4FanSensorMonitorEntry 2 }
-- Fan Sensor Event Configuration Table
st4FanSensorEventConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF St4FanSensorEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fan sensor event configuration table."
::= { st4FanSensors 4 }
st4FanSensorEventConfigEntry OBJECT-TYPE
SYNTAX St4FanSensorEventConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Event configuration objects for a particular fan sensor."
INDEX { st4UnitIndex, st4FanSensorIndex }
::= { st4FanSensorEventConfigTable 1 }
St4FanSensorEventConfigEntry ::= SEQUENCE {
st4FanSensorNotifications EventNotificationMethods,
st4FanSensorLowAlarm Integer32,
st4FanSensorLowWarning Integer32,
st4FanSensorHighWarning Integer32,
st4FanSensorHighAlarm Integer32
}
st4FanSensorNotifications OBJECT-TYPE
SYNTAX EventNotificationMethods
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The notification methods enabled for fan sensor events."
::= { st4FanSensorEventConfigEntry 1 }
st4FanSensorLowAlarm OBJECT-TYPE
SYNTAX Integer32(0..15300)
UNITS "rotations per minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low alarm threshold of the fan sensor in rotations per
minute."
::= { st4FanSensorEventConfigEntry 2 }
st4FanSensorLowWarning OBJECT-TYPE
SYNTAX Integer32(0..15300)
UNITS "rotations per minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The low warning threshold of the fan sensor in rotations per
minute."
::= { st4FanSensorEventConfigEntry 3 }
st4FanSensorHighWarning OBJECT-TYPE
SYNTAX Integer32(0..15300)
UNITS "rotations per minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The high warning threshold of the fan sensor in rotations per
minute."
::= { st4FanSensorEventConfigEntry 4 }
st4FanSensorHighAlarm OBJECT-TYPE
SYNTAX Integer32(0..15300)
UNITS "rotations per minute"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The high alarm threshold of the fan sensor in rotations per
minute."
::= { st4FanSensorEventConfigEntry 5 }
-- Event Information
st4EventInformation OBJECT IDENTIFIER ::= { st4Objects 99 }
st4EventStatusText OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The text representation of the enumerated integer value of
the most-relevant status or state object included in a trap.
The value of this object is set only when sent with a trap.
A read of this object will return a NULL string."
::= { st4EventInformation 1 }
st4EventStatusCondition OBJECT-TYPE
SYNTAX INTEGER {
nonError(0),
error(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The condition of the enumerated integer value of the status
object included in a trap. The value of this object is set
only when sent with a trap. A read of this object will
return zero."
::= { st4EventInformation 2 }
-- Notification Definitions
st4Notifications OBJECT IDENTIFIER ::= { sentry4 100 }
-- Events
st4Events OBJECT IDENTIFIER ::= { st4Notifications 0 }
-- The 0 is for V1 compatibility
st4UnitStatusEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4UnitID,
st4UnitName,
st4UnitStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Unit status event."
--#TYPE "Sentry: Unit Status Event."
--#SUMMARY "Status of Unit '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 4 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 1 }
st4InputCordStatusEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4InputCordID,
st4InputCordName,
st4InputCordState,
st4InputCordStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Input cord status event."
--#TYPE "Sentry: Input Cord Status Event."
--#SUMMARY "Status of Input Cord '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 2 }
st4InputCordActivePowerEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4InputCordID,
st4InputCordName,
st4InputCordActivePower,
st4InputCordActivePowerStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Input cord active power event."
--#TYPE "Sentry: Input Cord Active Power Event."
--#SUMMARY "Active Power Status of Input Cord '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 3 }
st4InputCordApparentPowerEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4InputCordID,
st4InputCordName,
st4InputCordApparentPower,
st4InputCordApparentPowerStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Input cord apparent power event."
--#TYPE "Sentry: Input Cord Apparent Power Event."
--#SUMMARY "Apparent Power Status of Input Cord '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 4 }
st4InputCordPowerFactorEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4InputCordID,
st4InputCordName,
st4InputCordPowerFactor,
st4InputCordPowerFactorStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Input cord power factor event."
--#TYPE "Sentry: Input Cord Power Factor Event."
--#SUMMARY "Power Factor Status of Input Cord '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 5 }
st4InputCordOutOfBalanceEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4InputCordID,
st4InputCordName,
st4InputCordOutOfBalance,
st4InputCordOutOfBalanceStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Input cord out-of-balance event."
--#TYPE "Sentry: Input Cord Out-of-Balance Event."
--#SUMMARY "Out-of-Balance Status of Input Cord '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 6 }
st4LineStatusEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4LineID,
st4LineLabel,
st4LineState,
st4LineStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Line status event."
--#TYPE "Sentry: Line Status Event."
--#SUMMARY "Status of Line '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 7 }
st4LineCurrentEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4LineID,
st4LineLabel,
st4LineCurrent,
st4LineCurrentStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Line current event."
--#TYPE "Sentry: Line Current Event."
--#SUMMARY "Current Status of Line '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 8 }
st4PhaseStatusEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4PhaseID,
st4PhaseLabel,
st4PhaseState,
st4PhaseStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Phase status event."
--#TYPE "Sentry: Phase Status Event."
--#SUMMARY "Status of Phase '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 9 }
st4PhaseVoltageEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4PhaseID,
st4PhaseLabel,
st4PhaseVoltage,
st4PhaseVoltageStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Phase voltage event."
--#TYPE "Sentry: Phase Voltage Event."
--#SUMMARY "Voltage Status of Phase '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 10 }
st4PhasePowerFactorEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4PhaseID,
st4PhaseLabel,
st4PhasePowerFactor,
st4PhasePowerFactorStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Phase voltage event."
--#TYPE "Sentry: Phase Power Factor Event."
--#SUMMARY "Power Factor Status of Phase '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 11 }
st4OcpStatusEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4OcpID,
st4OcpLabel,
st4OcpStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Over-current protector status event."
--#TYPE "Sentry: Over-current Protector Status Event."
--#SUMMARY "Status of Over-current Protector '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 4 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 12 }
st4BranchStatusEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4BranchID,
st4BranchLabel,
st4BranchState,
st4BranchStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Branch status event."
--#TYPE "Sentry: Branch Status Event."
--#SUMMARY "Status of Branch '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 13 }
st4BranchCurrentEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4BranchID,
st4BranchLabel,
st4BranchCurrent,
st4BranchCurrentStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Branch current event."
--#TYPE "Sentry: Branch Current Event."
--#SUMMARY "Current Status of Branch '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 14 }
st4OutletStatusEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4OutletID,
st4OutletName,
st4OutletState,
st4OutletStatus,
st4OutletControlState,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Outlet status event."
--#TYPE "Sentry: Outlet Status Event."
--#SUMMARY "Status of Outlet '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 6 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 15 }
st4OutletStateChangeEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4OutletID,
st4OutletName,
st4OutletState,
st4OutletStatus,
st4OutletControlState,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Outlet state change event."
--#TYPE "Sentry: Outlet State Change Event."
--#SUMMARY "Outlet '%s' (%s) state has changed to '%s'."
--#ARGUMENTS { 2, 1, 6 }
--#SEVERITY INFORMATIONAL
--#GENERIC 6
--#CATEGORY "Information Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 16 }
st4OutletCurrentEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4OutletID,
st4OutletName,
st4OutletCurrent,
st4OutletCurrentStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Outlet current event."
--#TYPE "Sentry: Outlet Current Event."
--#SUMMARY "Current Status of Outlet '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 17 }
st4OutletActivePowerEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4OutletID,
st4OutletName,
st4OutletActivePower,
st4OutletActivePowerStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Outlet active power event."
--#TYPE "Sentry: Outlet Active Power Event."
--#SUMMARY "Active Power Status of Outlet '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 18 }
st4OutletPowerFactorEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4OutletID,
st4OutletName,
st4OutletPowerFactor,
st4OutletPowerFactorStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Outlet power factor event."
--#TYPE "Sentry: Outlet Power Factor Event."
--#SUMMARY "Power Factor Status of Outlet '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 19 }
st4TempSensorEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4TempSensorID,
st4TempSensorName,
st4TempSensorValue,
st4TempSensorStatus,
st4TempSensorScale,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Temperature sensor event."
--#TYPE "Sentry: Temperature Sensor Event."
--#SUMMARY "Status of Temperature Sensor '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 6 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 20 }
st4HumidSensorEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4HumidSensorID,
st4HumidSensorName,
st4HumidSensorValue,
st4HumidSensorStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Humidity sensor event."
--#TYPE "Sentry: Humidity Sensor Event."
--#SUMMARY "Status of Humidity Sensor '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 21 }
st4WaterSensorStatusEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4WaterSensorID,
st4WaterSensorName,
st4WaterSensorStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Water sensor status event."
--#TYPE "Sentry: Water Sensor Status Event."
--#SUMMARY "Status of Water Sensor '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 4 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 22 }
st4CcSensorStatusEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4CcSensorID,
st4CcSensorName,
st4CcSensorStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Contact closure sensor status event."
--#TYPE "Sentry: Contact Closure Sensor Status Event."
--#SUMMARY "Status of Contact Closure Sensor '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 4 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 23 }
st4AdcSensorEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4AdcSensorID,
st4AdcSensorName,
st4AdcSensorValue,
st4AdcSensorStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Analog-to-digital converter sensor event."
--#TYPE "Sentry: Analog-to-Digital Converter Sensor Event."
--#SUMMARY "Status of Analog-to-Digital Converter Sensor '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 5 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 24 }
st4FanSensorEvent NOTIFICATION-TYPE
OBJECTS {
st4SystemLocation,
st4FanSensorID,
st4FanSensorName,
st4FanSensorValue,
st4FanSensorStatus,
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Fan sensor event."
--#TYPE "Sentry: Fan Sensor Event."
--#SUMMARY "Status of Fan Sensor '%s' (%s) is '%s'."
--#ARGUMENTS { 2, 1, 4 }
--#SEVERITY CRITICAL
--#GENERIC 6
--#CATEGORY "Error Events"
--#SOURCE_ID "A"
--#TIMEINDEX 255
--#HELP ""
--#HELPTAG 0
--#STATE UNKNOWN
::= { st4Events 25 }
-- Conformance Definitions
st4Conformance OBJECT IDENTIFIER ::= { sentry4 200 }
-- Object/Notification Groups
st4Groups OBJECT IDENTIFIER ::= { st4Conformance 1 }
st4SystemObjectsGroup OBJECT-GROUP
OBJECTS {
st4SystemProductName,
st4SystemLocation,
st4SystemFirmwareVersion,
st4SystemFirmwareBuildInfo,
st4SystemNICSerialNumber,
st4SystemNICHardwareInfo,
st4SystemProductSeries,
st4SystemFeatures,
st4SystemFeatureKey,
st4SystemConfigModifiedCount,
st4SystemUnitCount
}
STATUS current
DESCRIPTION
"System objects group."
::= { st4Groups 1 }
st4UnitObjectsGroup OBJECT-GROUP
OBJECTS {
st4UnitID,
st4UnitName,
st4UnitProductSN,
st4UnitModel,
st4UnitAssetTag,
st4UnitType,
st4UnitCapabilities,
st4UnitProductMfrDate,
st4UnitDisplayOrientation,
st4UnitOutletSequenceOrder,
st4UnitOutletDisplayOrder,
st4UnitInputCordCount,
st4UnitTempSensorCount,
st4UnitHumidSensorCount,
st4UnitWaterSensorCount,
st4UnitCcSensorCount,
st4UnitAdcSensorCount,
st4UnitFanSensorCount,
st4UnitStatus,
st4UnitNotifications
}
STATUS current
DESCRIPTION
"Unit objects group."
::= { st4Groups 2 }
st4InputCordObjectsGroup OBJECT-GROUP
OBJECTS {
st4InputCordActivePowerHysteresis,
st4InputCordApparentPowerHysteresis,
st4InputCordPowerFactorHysteresis,
st4InputCordOutOfBalanceHysteresis,
st4InputCordID,
st4InputCordName,
st4InputCordInletType,
st4InputCordNominalVoltage,
st4InputCordNominalVoltageMin,
st4InputCordNominalVoltageMax,
st4InputCordCurrentCapacity,
st4InputCordCurrentCapacityMax,
st4InputCordPowerCapacity,
st4InputCordNominalPowerFactor,
st4InputCordLineCount,
st4InputCordPhaseCount,
st4InputCordOcpCount,
st4InputCordBranchCount,
st4InputCordOutletCount,
st4InputCordState,
st4InputCordStatus,
st4InputCordActivePower,
st4InputCordActivePowerStatus,
st4InputCordApparentPower,
st4InputCordApparentPowerStatus,
st4InputCordPowerUtilized,
st4InputCordPowerFactor,
st4InputCordPowerFactorStatus,
st4InputCordEnergy,
st4InputCordFrequency,
st4InputCordOutOfBalance,
st4InputCordOutOfBalanceStatus,
st4InputCordNotifications,
st4InputCordActivePowerLowAlarm,
st4InputCordActivePowerLowWarning,
st4InputCordActivePowerHighWarning,
st4InputCordActivePowerHighAlarm,
st4InputCordApparentPowerLowAlarm,
st4InputCordApparentPowerLowWarning,
st4InputCordApparentPowerHighWarning,
st4InputCordApparentPowerHighAlarm,
st4InputCordPowerFactorLowAlarm,
st4InputCordPowerFactorLowWarning,
st4InputCordOutOfBalanceHighWarning,
st4InputCordOutOfBalanceHighAlarm
}
STATUS current
DESCRIPTION
"Input cord objects group."
::= { st4Groups 3 }
st4LineObjectsGroup OBJECT-GROUP
OBJECTS {
st4LineCurrentHysteresis,
st4LineID,
st4LineLabel,
st4LineCurrentCapacity,
st4LineState,
st4LineStatus,
st4LineCurrent,
st4LineCurrentStatus,
st4LineCurrentUtilized,
st4LineNotifications,
st4LineCurrentLowAlarm,
st4LineCurrentLowWarning,
st4LineCurrentHighWarning,
st4LineCurrentHighAlarm
}
STATUS current
DESCRIPTION
"Line objects group."
::= { st4Groups 4 }
st4PhaseObjectsGroup OBJECT-GROUP
OBJECTS {
st4PhaseVoltageHysteresis,
st4PhasePowerFactorHysteresis,
st4PhaseID,
st4PhaseLabel,
st4PhaseNominalVoltage,
st4PhaseBranchCount,
st4PhaseOutletCount,
st4PhaseState,
st4PhaseStatus,
st4PhaseVoltage,
st4PhaseVoltageStatus,
st4PhaseVoltageDeviation,
st4PhaseCurrent,
st4PhaseCurrentCrestFactor,
st4PhaseActivePower,
st4PhaseApparentPower,
st4PhasePowerFactor,
st4PhasePowerFactorStatus,
st4PhaseReactance,
st4PhaseEnergy,
st4PhaseNotifications,
st4PhaseVoltageLowAlarm,
st4PhaseVoltageLowWarning,
st4PhaseVoltageHighWarning,
st4PhaseVoltageHighAlarm,
st4PhasePowerFactorLowAlarm,
st4PhasePowerFactorLowWarning
}
STATUS current
DESCRIPTION
"Phase objects group."
::= { st4Groups 5 }
st4OcpObjectsGroup OBJECT-GROUP
OBJECTS {
st4OcpID,
st4OcpLabel,
st4OcpType,
st4OcpCurrentCapacity,
st4OcpCurrentCapacityMax,
st4OcpBranchCount,
st4OcpOutletCount,
st4OcpStatus,
st4OcpNotifications
}
STATUS current
DESCRIPTION
"Over-current protector objects group."
::= { st4Groups 6 }
st4BranchObjectsGroup OBJECT-GROUP
OBJECTS {
st4BranchCurrentHysteresis,
st4BranchID,
st4BranchLabel,
st4BranchCurrentCapacity,
st4BranchPhaseID,
st4BranchOcpID,
st4BranchOutletCount,
st4BranchState,
st4BranchStatus,
st4BranchCurrent,
st4BranchCurrentStatus,
st4BranchCurrentUtilized,
st4BranchNotifications,
st4BranchCurrentLowAlarm,
st4BranchCurrentLowWarning,
st4BranchCurrentHighWarning,
st4BranchCurrentHighAlarm
}
STATUS current
DESCRIPTION
"Branch objects group."
::= { st4Groups 7 }
st4OutletObjectsGroup OBJECT-GROUP
OBJECTS {
st4OutletCurrentHysteresis,
st4OutletActivePowerHysteresis,
st4OutletPowerFactorHysteresis,
st4OutletSequenceInterval,
st4OutletRebootDelay,
st4OutletStateChangeLogging,
st4OutletID,
st4OutletName,
st4OutletCapabilities,
st4OutletSocketType,
st4OutletCurrentCapacity,
st4OutletPowerCapacity,
st4OutletWakeupState,
st4OutletPostOnDelay,
st4OutletPhaseID,
st4OutletOcpID,
st4OutletBranchID,
st4OutletState,
st4OutletStatus,
st4OutletCurrent,
st4OutletCurrentStatus,
st4OutletCurrentUtilized,
st4OutletVoltage,
st4OutletActivePower,
st4OutletActivePowerStatus,
st4OutletApparentPower,
st4OutletPowerFactor,
st4OutletPowerFactorStatus,
st4OutletCurrentCrestFactor,
st4OutletReactance,
st4OutletEnergy,
st4OutletNotifications,
st4OutletCurrentLowAlarm,
st4OutletCurrentLowWarning,
st4OutletCurrentHighWarning,
st4OutletCurrentHighAlarm,
st4OutletActivePowerLowAlarm,
st4OutletActivePowerLowWarning,
st4OutletActivePowerHighWarning,
st4OutletActivePowerHighAlarm,
st4OutletPowerFactorLowAlarm,
st4OutletPowerFactorLowWarning,
st4OutletControlState,
st4OutletControlAction,
st4OutletQueueControl
}
STATUS current
DESCRIPTION
"Outlet objects group."
::= { st4Groups 8 }
st4TempSensorObjectsGroup OBJECT-GROUP
OBJECTS {
st4TempSensorHysteresis,
st4TempSensorScale,
st4TempSensorID,
st4TempSensorName,
st4TempSensorValueMin,
st4TempSensorValueMax,
st4TempSensorValue,
st4TempSensorStatus,
st4TempSensorNotifications,
st4TempSensorLowAlarm,
st4TempSensorLowWarning,
st4TempSensorHighWarning,
st4TempSensorHighAlarm
}
STATUS current
DESCRIPTION
"Temperature sensor objects group."
::= { st4Groups 9 }
st4HumidSensorObjectsGroup OBJECT-GROUP
OBJECTS {
st4HumidSensorHysteresis,
st4HumidSensorID,
st4HumidSensorName,
st4HumidSensorValue,
st4HumidSensorStatus,
st4HumidSensorNotifications,
st4HumidSensorLowAlarm,
st4HumidSensorLowWarning,
st4HumidSensorHighWarning,
st4HumidSensorHighAlarm
}
STATUS current
DESCRIPTION
"Humidity sensor objects group."
::= { st4Groups 10 }
st4WaterSensorObjectsGroup OBJECT-GROUP
OBJECTS {
st4WaterSensorID,
st4WaterSensorName,
st4WaterSensorStatus,
st4WaterSensorNotifications
}
STATUS current
DESCRIPTION
"Water sensor objects group."
::= { st4Groups 11 }
st4CcSensorObjectsGroup OBJECT-GROUP
OBJECTS {
st4CcSensorID,
st4CcSensorName,
st4CcSensorStatus,
st4CcSensorNotifications
}
STATUS current
DESCRIPTION
"Contact closure sensor objects group."
::= { st4Groups 12 }
st4AdcSensorObjectsGroup OBJECT-GROUP
OBJECTS {
st4AdcSensorHysteresis,
st4AdcSensorID,
st4AdcSensorName,
st4AdcSensorValue,
st4AdcSensorStatus,
st4AdcSensorNotifications,
st4AdcSensorLowAlarm,
st4AdcSensorLowWarning,
st4AdcSensorHighWarning,
st4AdcSensorHighAlarm
}
STATUS current
DESCRIPTION
"Analog-to-digital converter sensor objects group."
::= { st4Groups 13 }
st4FanSensorObjectsGroup OBJECT-GROUP
OBJECTS {
st4FanSensorHysteresis,
st4FanSensorID,
st4FanSensorName,
st4FanSensorValue,
st4FanSensorStatus,
st4FanSensorNotifications,
st4FanSensorLowAlarm,
st4FanSensorLowWarning,
st4FanSensorHighWarning,
st4FanSensorHighAlarm
}
STATUS current
DESCRIPTION
"Fan sensor objects group."
::= { st4Groups 14 }
st4EventInfoObjectsGroup OBJECT-GROUP
OBJECTS {
st4EventStatusText,
st4EventStatusCondition
}
STATUS current
DESCRIPTION
"Event information objects group."
::= { st4Groups 99 }
st4EventNotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
st4UnitStatusEvent,
st4InputCordStatusEvent,
st4InputCordActivePowerEvent,
st4InputCordApparentPowerEvent,
st4InputCordPowerFactorEvent,
st4InputCordOutOfBalanceEvent,
st4LineStatusEvent,
st4LineCurrentEvent,
st4PhaseStatusEvent,
st4PhaseVoltageEvent,
st4PhasePowerFactorEvent,
st4OcpStatusEvent,
st4BranchStatusEvent,
st4BranchCurrentEvent,
st4OutletStatusEvent,
st4OutletStateChangeEvent,
st4OutletCurrentEvent,
st4OutletActivePowerEvent,
st4OutletPowerFactorEvent,
st4TempSensorEvent,
st4HumidSensorEvent,
st4WaterSensorStatusEvent,
st4CcSensorStatusEvent,
st4AdcSensorEvent,
st4FanSensorEvent
}
STATUS current
DESCRIPTION
"Event notifications group."
::= { st4Groups 100 }
-- Compliance Statements
st4Compliances OBJECT IDENTIFIER ::= { st4Conformance 2 }
st4ModuleCompliances MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The requirements for conformance to the Sentry4-MIB."
MODULE
GROUP st4SystemObjectsGroup
DESCRIPTION
"System objects group."
GROUP st4UnitObjectsGroup
DESCRIPTION
"Unit objects group."
GROUP st4InputCordObjectsGroup
DESCRIPTION
"Input cord objects group."
GROUP st4LineObjectsGroup
DESCRIPTION
"Line objects group."
GROUP st4PhaseObjectsGroup
DESCRIPTION
"Phase objects group."
GROUP st4OcpObjectsGroup
DESCRIPTION
"Over-current protector objects group."
GROUP st4BranchObjectsGroup
DESCRIPTION
"Branch objects group."
GROUP st4OutletObjectsGroup
DESCRIPTION
"Outlet objects group."
GROUP st4TempSensorObjectsGroup
DESCRIPTION
"Temperature sensor objects group."
GROUP st4HumidSensorObjectsGroup
DESCRIPTION
"Humidity sensor objects group."
GROUP st4WaterSensorObjectsGroup
DESCRIPTION
"Water sensor objects group."
GROUP st4CcSensorObjectsGroup
DESCRIPTION
"Contact closure sensor objects group."
GROUP st4AdcSensorObjectsGroup
DESCRIPTION
"Analog-to-digital converter sensor objects group."
GROUP st4FanSensorObjectsGroup
DESCRIPTION
"Fan sensor objects group."
GROUP st4EventInfoObjectsGroup
DESCRIPTION
"Event information objects group."
GROUP st4EventNotificationsGroup
DESCRIPTION
"Event notifications group."
::= { st4Compliances 1 }
END