david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/transition/TN-ERPS-MIB

860 lines
28 KiB
Plaintext
Raw Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
-- *****************************************************************
-- TN-ERPS-MIB.my : TN Ethernet Ring Protection Switch MIB
--
-- Author : Tony Lei
-- update by Angela Xing
-- Copyright (c) 2009 by Transition Networks, Inc.
-- All rights reserved.
--
-- *************************************************************************************************
--
TN-ERPS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
Unsigned32,
Gauge32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
RowStatus,TruthValue,
MacAddress,
DisplayString
FROM SNMPv2-TC -- [RFC2579]
VlanId
FROM Q-BRIDGE-MIB
InterfaceIndex
FROM IF-MIB
Dot1agCfmMepId
FROM IEEE8021-CFM-MIB
tnProducts
FROM TRANSITION-SMI
tnProtectionMIB
FROM TN-PROTECTION-MIB;
--
-- main body
--
tnERPSMIB OBJECT IDENTIFIER ::= { tnProtectionMIB 3 }
tnERPSMIBNotifications OBJECT IDENTIFIER ::= { tnERPSMIB 1 }
tnERPSMgmtObjects OBJECT IDENTIFIER ::= { tnERPSMIB 2 }
tnERPSMIBConformance OBJECT IDENTIFIER ::= { tnERPSMIB 3 }
-- Textual Conventions
-- ******************************************************************
-- NOTIFICATIONS (TRAPS)
-- These notifications will be sent to the management entity
-- whenever a ERPS Node loses/restores contact with the adjacent ring nodes.
-- ******************************************************************
tnErpsAlarmDown NOTIFICATION-TYPE
OBJECTS {
tnERPSState,
tnERPSStatePort0,
tnERPSStatePort1,
tnERPSStateRPLUnBlocked,
tnERPSStateNoApsReceived,
tnERPSStatePort0Blockstatus,
tnERPSStatePort1Blockstatus
}
STATUS current
DESCRIPTION
"A ERPS has a persistent defect condition. A notification
(fault alarm) is sent to the management entity with the OID
of the ERPS that has detected the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the ERPS reporting the defect
by the indices in the OID of the variables in the notification:
tnErpsInstance - Also the index of the ERPS state table entry
(tnERPSStateTable).
"
::= { tnERPSMIBNotifications 2 }
tnErpsAlarmUp NOTIFICATION-TYPE
OBJECTS {
tnERPSState,
tnERPSStatePort0,
tnERPSStatePort1,
tnERPSStateRPLUnBlocked,
tnERPSStateNoApsReceived,
tnERPSStatePort0Blockstatus,
tnERPSStatePort1Blockstatus
}
STATUS current
DESCRIPTION
"A ERPS has cleared a defect condition. A notification
(fault clearance alarm) is sent to the management entity with the OID
of the ERPS that has cleared the fault.
The management entity receiving the notification can identify
the system from the network source address of the
notification, and can identify the ERPS reporting the alarm
by the indices in the OID of the variables in the notification:
tnErpsInstance - Also the index of the ERPS state table entry
(tnERPSStateTable).
"
::= { tnERPSMIBNotifications 1 }
-- ******************************************************************
-- EPRS table
tnERPSTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnERPSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table displays and sets current Ethernet Protection Switching configurations.
"
::= { tnERPSMgmtObjects 1 }
tnERPSEntry OBJECT-TYPE
SYNTAX TnERPSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents an Ethernet Ring Protection Switching configuration."
INDEX { tnERPSinstance }
::= { tnERPSTable 1 }
TnERPSEntry ::= SEQUENCE {
tnERPSinstance Unsigned32,
tnERPSPort0 INTEGER,
tnERPSPort1 INTEGER,
tnERPSPort0ApsMep INTEGER,
tnERPSPort1ApsMep INTEGER,
tnERPSPort0SfMep INTEGER,
tnERPSPort1SfMep INTEGER,
tnERPSRingType INTEGER,
tnERPSInterconnectednode TruthValue,
tnERPSVirtualChannel TruthValue,
tnERPSMajorRingID INTEGER,
tnERPSAlarm INTEGER,
tnERPSRowStatus RowStatus
}
tnERPSinstance OBJECT-TYPE
SYNTAX Unsigned32(1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ID of the ERPS.
"
::= { tnERPSEntry 1 }
tnERPSPort0 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This will create a Port 0 of the switch in the ring.
"
::= { tnERPSEntry 2 }
tnERPSPort1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This will create 'Port 1' of the switch in the Ring.
As interconnected sub-ring will have only one ring port,
'Port 1' is configured as '0' for interconnected sub-ring.
'0' in this field indicates that no 'Port 1' is associated with this instance
"
::= { tnERPSEntry 3 }
tnERPSPort0ApsMep OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Port 0 APS PDU handling MEP.
"
::= { tnERPSEntry 4 }
tnERPSPort1ApsMep OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Port 1 APS PDU handling MEP. As only one APS MEP is associated with interconnected
sub-ring without virtual channel, it is configured as '0' for such ring instances.
'0' in this field indicates that no Port 1 APS MEP is associated with this instance.
"
::= { tnERPSEntry 5 }
tnERPSPort0SfMep OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Port 0 Signal Fail reporting MEP.
"
::= { tnERPSEntry 6 }
tnERPSPort1SfMep OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Port 1 Signal Fail reporting MEP.
"
::= { tnERPSEntry 7 }
tnERPSRingType OBJECT-TYPE
SYNTAX INTEGER{
major (1),
sub (2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of Protecting ring. It can be either major ring or sub-ring. As per G.8032v2,
they are defined as :
Major Ring: A Major ring is the Ethernet ring that is connected on two ports to
an interconnection node.
Sub Ring :A sub-ring is an Ethernet ring which is connected to (an)other Ethernet
ring(s) or network(s) through the use of a pair of interconnection nodes.
On their own, the sub-ring links do not form a closed loop.
A closed connection of traffic may be formed by the sub-ring links and
one or more links, that are controlled by (an)other Ethernet ring(s) or network(s),
between interconnection nodes
"
::= { tnERPSEntry 8 }
tnERPSInterconnectednode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Interconnected Node indicates that the ring instance is interconnected.
Click on the checkbox to configure this.
'True' indicates it is an interconnected node for this instance.
'False' indicates that the configured instance is not interconnected.
"
::= { tnERPSEntry 9 }
tnERPSVirtualChannel OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Sub-rings can either have virtual channel or not on the interconnected node.
'True' indicates it is a sub-ring with virtual channel.
'False' indicates, sub-ring doesn't have virtual channel.
"
::= { tnERPSEntry 10 }
tnERPSMajorRingID OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Major ring group ID for the interconnected sub-ring.
It is used to send topology change updates on major ring.
If ring is major, this value is same as the protection group ID of this ring.
"
::= { tnERPSEntry 11 }
tnERPSAlarm OBJECT-TYPE
SYNTAX INTEGER{
active (1),
notActive (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"There is an active alarm on the ERPS.
"
::= { tnERPSEntry 12 }
tnERPSRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The rowstatus of the Ethernet Ring Protection Switch.
"
::= { tnERPSEntry 13 }
-- ******************************************************************
-- TN ERPS Cfg Table
-- ******************************************************************
tnERPSConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnERPSConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration of Instance Configuration."
::= { tnERPSMgmtObjects 2 }
tnERPSConfigEntry OBJECT-TYPE
SYNTAX TnERPSConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents an ERPS.
"
INDEX { tnERPSinstance }
::= { tnERPSConfigTable 1 }
TnERPSConfigEntry ::= SEQUENCE {
tnERPSConfigStatus INTEGER,
tnERPSConfigGuardTime INTEGER,
tnERPSConfigWtrTime INTEGER,
tnERPSConfigHoldOffTime INTEGER,
tnERPSConfigVersion INTEGER,
tnERPSConfigRevertive TruthValue
}
tnERPSConfigStatus OBJECT-TYPE
SYNTAX INTEGER{
down (0),
up (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Red: This ERPS is only created and has not yet been configured - is not active.
Green: This ERPS is configured - is active<76><65>
"
::= { tnERPSConfigEntry 1 }
tnERPSConfigGuardTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Guard timeout value to be used to prevent ring nodes from receiving outdated R-APS messages.
The period of the guard timer can be configured in 10 ms steps between 10 ms and 2 seconds,
with a default value of 500 ms
"
::= { tnERPSConfigEntry 2 }
tnERPSConfigWtrTime OBJECT-TYPE
SYNTAX INTEGER{
t1min (1),
t2min (2),
t3min (3),
t4min (4),
t5min (5),
t6min (6),
t7min (7),
t8min (8),
t9min (9),
t10min (10),
t11min (11),
t12min (12)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Wait To Restore timing value to be used in revertive switching.
The period of the WTR time can be configured by the operator
in 1 minute steps between 1 and 12 minutes with a default value of 5 minutes.
"
::= { tnERPSConfigEntry 3 }
tnERPSConfigHoldOffTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timing value to be used to make persistent check on Signal Fail before switching.
The range of the hold off timer is 0 to 10 seconds in steps of 100 ms
"
::= { tnERPSConfigEntry 4 }
tnERPSConfigVersion OBJECT-TYPE
SYNTAX INTEGER{
v1 (1),
v2 (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Select v1 or v2 as the ERPS version to be used. For fields such as Version, OpCode, Flags, and End TLV, the values used are as defined in ITU-T Y.1731 (Version 0x01 is transmitted per
the current version of this Recommendation at the time of this publication.)
G.8032v1 supported a single ring topology and G.8032v2 supports multiple rings/ladder topology.
v1: G.8032 v1 supports a single ring topology. The v1 protocol is robust enough to work for unidirectional failure and
multiple link failure scenarios in a ring topology.
It allows mechanism to force switch (FS) or manual switch (MS) to take care of field maintenance scenario.
v2: G.8032 v2 supports multiple rings/ladder topology.
The v2 protocol also introduced other features such as Revertive/ Non-revertive mode after condition,
that is causing the switch, is cleared, Administrative commands - Forced Switch (FS),
Manual Switch (MS) for blocking a particular ring port, Flush FDB (Filtering database),
and support of multiple ERP instances on a single ring.
"
::= { tnERPSConfigEntry 5 }
tnERPSConfigRevertive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"In Revertive mode, after the conditions causing a protection switch has cleared,
the traffic channel is restored to the working transport entity, i.e., blocked on the RPL.
In Non-Revertive mode, the traffic channel continues to use the RPL,
if it is not failed, after a protection switch condition has cleared.
"
::= { tnERPSConfigEntry 6 }
-- erps vlan Configuration tables
tnERPSVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnERPSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration of vlan Configuration."
::= { tnERPSMgmtObjects 6 }
tnERPSVlanEntry OBJECT-TYPE
SYNTAX TnERPSVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents an vlan.
"
INDEX { tnERPSinstance,tnERPSVlanInstance }
::= { tnERPSVlanTable 1 }
TnERPSVlanEntry ::= SEQUENCE {
tnERPSVlanInstance Unsigned32,
tnERPSVlanId VlanId,
tnERPSVlanRowStatus RowStatus
}
tnERPSVlanInstance OBJECT-TYPE
SYNTAX Unsigned32(1..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The instance of the ERPS vlan.
"
::= { tnERPSVlanEntry 1 }
tnERPSVlanId OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-write
STATUS current
DESCRIPTION "vlan id.
"
::= { tnERPSVlanEntry 2 }
tnERPSVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION "row status.
"
::= { tnERPSVlanEntry 3 }
-- RPL Configuration tables
tnERPSRPLTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnERPSRPLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration of RPL Configuration."
::= { tnERPSMgmtObjects 3 }
tnERPSRPLEntry OBJECT-TYPE
SYNTAX TnERPSRPLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents an RPL.
"
INDEX { tnERPSinstance }
::= { tnERPSRPLTable 1 }
TnERPSRPLEntry ::= SEQUENCE {
tnERPSRPLRole INTEGER,
tnERPSRPLPort INTEGER,
tnERPSRPLClear TruthValue
}
tnERPSRPLRole OBJECT-TYPE
SYNTAX INTEGER{
none (1),
owner (2),
neighbour (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "It can be either RPL owner or RPL Neighbour.
"
::= { tnERPSRPLEntry 1 }
tnERPSRPLPort OBJECT-TYPE
SYNTAX INTEGER{
none (1),
port0 (2),
port1 (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "This allows to select the east port or west port as the RPL block.
"
::= { tnERPSRPLEntry 2 }
tnERPSRPLClear OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "If the owner has to be changed,
then the clear check box allows to clear the RPL owner for that ERPS ring.
"
::= { tnERPSRPLEntry 3 }
-- Command Configuration tables
tnERPSCommandTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnERPSCommandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration of Command Configuration."
::= { tnERPSMgmtObjects 4 }
tnERPSCommandEntry OBJECT-TYPE
SYNTAX TnERPSCommandEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents an Command.
"
INDEX { tnERPSinstance }
::= { tnERPSCommandTable 1 }
TnERPSCommandEntry ::= SEQUENCE {
tnERPSCommand INTEGER,
tnERPSCommandPort INTEGER
}
tnERPSCommand OBJECT-TYPE
SYNTAX INTEGER{
none (1),
manual (2),
forced (3),
clear (4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Administrative command.
A port can be administratively configured to be in either manual switch or
forced switch state.
"
::= { tnERPSCommandEntry 1 }
tnERPSCommandPort OBJECT-TYPE
SYNTAX INTEGER{
none (1),
port0 (2),
port1 (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Port selection - Port0 or Port1 of the protection Group on which the command is applied.
"
::= { tnERPSCommandEntry 2 }
-- Instance State tables
tnERPSStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnERPSStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration of EVC control entry."
::= { tnERPSMgmtObjects 5 }
tnERPSStateEntry OBJECT-TYPE
SYNTAX TnERPSStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents an instance State.
"
INDEX { tnERPSinstance }
::= { tnERPSStateTable 1 }
TnERPSStateEntry ::= SEQUENCE {
tnERPSState INTEGER,
tnERPSStatePort0 INTEGER,
tnERPSStatePort1 INTEGER,
tnERPSStateTxAps DisplayString,
tnERPSStatePort0RxAps DisplayString,
tnERPSStatePort1RxAps DisplayString,
tnERPSStateWtrRemaining INTEGER,
tnERPSStateRPLUnBlocked INTEGER,
tnERPSStateNoApsReceived TruthValue,
tnERPSStatePort0Blockstatus INTEGER,
tnERPSStatePort1Blockstatus INTEGER,
tnERPSStateFopAlarm TruthValue
}
tnERPSState OBJECT-TYPE
SYNTAX INTEGER{
idle (1),
protected (2),
manual (3),
forced (4),
pending (5),
unknown (6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "ERPS state according to State Transition Tables in G.8032.
"
::= { tnERPSStateEntry 1 }
tnERPSStatePort0 OBJECT-TYPE
SYNTAX INTEGER{
ok (1),
sf (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "
OK: State of East port is ok.
SF: State of East port is Signal Fail.
"
::= { tnERPSStateEntry 2 }
tnERPSStatePort1 OBJECT-TYPE
SYNTAX INTEGER{
ok (1),
sf (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"OK: State of East port is ok.
SF: State of East port is Signal Fail.
"
::= { tnERPSStateEntry 3 }
tnERPSStateTxAps OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmitted APS according to State Transition Tables in G.8032."
::= { tnERPSStateEntry 4 }
tnERPSStatePort0RxAps OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received APS on Port 0 according to State Transition Tables in G.8032."
::= { tnERPSStateEntry 5 }
tnERPSStatePort1RxAps OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received APS on Port 1 according to State Transition Tables in G.8032."
::= { tnERPSStateEntry 6 }
tnERPSStateWtrRemaining OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remaining WTR timeout in milliseconds"
::= { tnERPSStateEntry 7 }
tnERPSStateRPLUnBlocked OBJECT-TYPE
SYNTAX INTEGER{
block (0),
unblock (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"APS is received on the working flow."
::= { tnERPSStateEntry 8 }
tnERPSStateNoApsReceived OBJECT-TYPE
SYNTAX INTEGER{
noapsReceived (0),
apsReceived (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RAPS PDU is not received from the other end."
::= { tnERPSStateEntry 9 }
tnERPSStatePort0Blockstatus OBJECT-TYPE
SYNTAX INTEGER{
block (0),
unblock (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Block status for Port 0 (Both traffic and R-APS block status).
R-APS channel is never blocked on sub-rings without virtual channel."
::= { tnERPSStateEntry 10 }
tnERPSStatePort1Blockstatus OBJECT-TYPE
SYNTAX INTEGER{
block (0),
unblock (1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Block status for Port 1 (Both traffic and R-APS block status).
R-APS channel is never blocked on sub-rings without virtual channel"
::= { tnERPSStateEntry 11 }
tnERPSStateFopAlarm OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Failure of Protocol Defect(FOP) status.
If FOP is detected, the red LED lights; otherwise the green LED lights. "
::= { tnERPSStateEntry 12 }
-- Sub-Ring Configuration tables
tnERPSSubRingCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnERPSSubRingCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration of Command Configuration."
::= { tnERPSMgmtObjects 7 }
tnERPSSubRingCfgEntry OBJECT-TYPE
SYNTAX TnERPSSubRingCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents an sub ring configuration.
"
INDEX { tnERPSinstance }
::= { tnERPSSubRingCfgTable 1 }
TnERPSSubRingCfgEntry ::= SEQUENCE {
tnERPSSubRingType DisplayString,
tnERPSSubRingTopologyChange TruthValue
}
tnERPSSubRingType OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION "erps ring type.
"
::= { tnERPSSubRingCfgEntry 1 }
tnERPSSubRingTopologyChange OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Clicking this checkbox indicates that the topology changes in the sub-ring are propagated in the major ring.
"
::= { tnERPSSubRingCfgEntry 2 }
-- erps statistics tables
tnERPSStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TnERPSStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the display of erps statistics."
::= { tnERPSMgmtObjects 8 }
tnERPSStatisticsEntry OBJECT-TYPE
SYNTAX TnERPSStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents an sub ring configuration.
"
INDEX { tnERPSinstance }
::= { tnERPSStatisticsTable 1 }
TnERPSStatisticsEntry ::= SEQUENCE {
tnERPSRAPSPDUReceived INTEGER,
tnERPSRAPSPDUDropped INTEGER,
tnERPSLocalSFOccurred INTEGER,
tnERPSLocalSFCleared INTEGER,
tnERPSRemoteSFReceived INTEGER,
tnERPSRemoteFSReceived INTEGER,
tnERPSNRMessageSent INTEGER
}
tnERPSRAPSPDUReceived OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "erps R-APS PDU received.
"
::= { tnERPSStatisticsEntry 1 }
tnERPSRAPSPDUDropped OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "erps R-APS PDU dropped.
"
::= { tnERPSStatisticsEntry 2 }
tnERPSLocalSFOccurred OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "erps local SF occurred.
"
::= { tnERPSStatisticsEntry 3 }
tnERPSLocalSFCleared OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "erps local SF cleared.
"
::= { tnERPSStatisticsEntry 4 }
tnERPSRemoteSFReceived OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "erps remote SF received.
"
::= { tnERPSStatisticsEntry 5 }
tnERPSRemoteFSReceived OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "erps remote FS received.
"
::= { tnERPSStatisticsEntry 6 }
tnERPSNRMessageSent OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION "erps NR message sent.
"
::= { tnERPSStatisticsEntry 7 }
END
Reference in New Issue Copy Permalink